Australian Forests & Timber News, February 2011 – 39
For Sale Morbark 2455 Flail/Chipper • Good Condition • New disc installed Aug 2010 • Key knife system • Large range of spares including PTO’s, crane booms, flail drums, hydraulic pumps, bearings etc • Oil sample history on engines plus Cat receipts for recent work • Chip sample reports also available • 400 tonne/day machine with excellent chip quality
POA 0419 227 411
FOR SALE
John Deere 909JH Harvester 8900Hrs Waratah 624 Super/Timberite POA Cat 320DLL Log Loader 1000Hrs GLL 60 Grapple $344,000 + GST
FOR SALE Floatation tyres off Valmet 890.
Timberjack 460 10000Hrs Dual Arch Grapple and Winch + Wheel Chains $85,000+GST
Valmet 890 6 wheel forwarder.
Timco 455C Feller Buncher 13550Hrs Barsaw head POA Timberjack 1710 6 wheel forwarder.
PHONE: 0428 148 857
Docking saw bench (Elbeck) heavy duty unit ex Bunnings sleeper milling operations. $6,500 incl GST ono. Located Perth WA 0414-784-570
Plant and equiPment
for sale Log In-feed Log Deck three strand 60,000lb chain feeding log loading deck with loading arms and log turners. $6,000+GST Carriage Line, MacSim 3 knee sizing carriage complete with on board flitch turners, Jaymor electronic sizing, with operators cabin (carriage recently reconditioned) Raymond hydraulic feed works. $30,500+GST Roll Case Heavy Roll case out-feed & flitch storage deck. $12,000+GST Grey Bench, right hand gauge, with double roundabout out feed systems, including in feed decks, and flitch transfer from breaking down saw. $55,000+GST Rex Planer, Rex 5 spindle four side planer (UNI630) Capacity 630mm wide x 250mm thick, the machine comes with tooling some spares and operators manual in very good condition $40,000+GST Multi Saw Edger, Turner 3 saw over arbour edger, 1 fixed & 2 moving saws, including 4 with board transfer system from breaking down saw, chain in feed deck and roll case, out feed roll case & separator, laser saw position indicators, & hydraulic set works. $32,500+GST Planer Thicknesser, Tru-Pro Thicknesser, maximum width 1250mm maximum depth 250mm this machine is in excellent condition, comes with setting jigs and operating Manuel. $5,500+GST Band Re-saw, Robinson 48” band re-saw in good condition, $6,500+GST Multi Rip Saw, SCM model M-3 carpet feed system complete with motor starter & control also fitted with safety interlock system, saw spacers and arbour, $10,500+GST Moulder, Weinig 22AL 6 spindle machine profile & straight knife jointing 60 metre per min feed machine in good condition complete with sound enclosure some spares available. $28,500 +GST Laminating Press, Taylor multi leaf rotary laminating press 3.0 x 750 x 15 leaf unit complete with tensioning unit. $10,500+GST Chalk line Docker, Lakeland chalk line docking saw capacity 200mm x 50mm including in-feed belt & marking station, $6,000+GST Moulder, Weinig 30N Moulder, four spindle through feed machine in fair condition $22,000+GST A wide range of sawmill, timber processing & handling equipment, including log loaders & fork lift trucks are available on enquiry.
Contact: Garry Henthorn Phone: 03-51397000 Email: Garry.Henthorn@gunns.com.au
AVAILABLE NOW
Softwood Bandsaw Processing Mill For high recovery sawmilling Valen Kone VK26 Debarker
Log bin and handling equipment. In and out feed conveyors. Log Transfer deck. $57,000+GST
Timbco 416 base
Forano Twin 60” Bandsaw Log Breakdown line
Top dogging. Log handling. Remote operator. Log diameter 60cm – 12cm, 6m - 2.4m. Hydraulic sizing 30cm – 7.5cm. $188,000+GST
Salem Twin 54” Band Resaw
Timbco 425B being fitted with Timbco 33” Sawbar felling head.
Roundabout. Operator cabin. Hydraulic sizing, fence, line bar, cant turner and handling equipment. Sawn timber transfer deck. $279,000+GST
Manitowoc flail debarker.
Moreen Johnston 50” Horizontal Band Wing line
With roundabout and wing transfer deck. $44,000.00+GST
Windsor board twin edger
With laser guides, pneumatic sizing and conveyor waste transfer. $37,000+GST
Windsor double docking and end trimming recovery line with conveyors and unscrambler $29,000+GST
Austral Timber Group Contact Ken Baker 0438 643 992 kjb@agnew.com.au
$10,000+gST
WRECKing nOW
Wrecking. Timbco, Valmet, Waratah, Rosin, Cat, Komatsu, etc. Many customer machines and parts for sale. List available. Wrecking now. Various Timbco’s. Valmets. Komatsu, Cat, Waratah, Rosin, Dasa, Logrite, Motomit and more.
Buying and selling forestry equipment.