www.Printo.com.au
M
.A
U
Application instructions
Iron On Numbers Iron On letters Custom transfers
Step 1
M
.A
U
PR
IN
TO
.C
O
Preheat your iron to the "Cotton" setting. Place your garment on a at surface and pre-iron it to release moisture and remove wrinkles.
Step 2
M
.A
U
PR
IN
TO
.C
O
Place your Iron On number face down on the garment with the clear plastic carrier facing up. Place a piece of protecting baking paper (included for large orders) or piece of clothes on top of the transfer to protect it from the heat. Do not put hot iron onto the plastic carrier or transfer directly, because it will destroy it!
Step 3
M
.A
U
PR
IN
TO
.C
O
Using FIRM STEADY PRESSURE, holding iron with both hands and applying your body weight, hold the iron on each area of the transfer for around 20 seconds. Continue this process until you have completely covered the entire transfer. Be sure also to cover all corners and edges.
Step 4
PR
IN
TO
.C
O
M
.A
U
PR
IN
TO
.C
O
Wait for 2-3 minutes until the transfer cools down and slowly peel away the clear plastic carrier.
Step 5 After you remove the plastic carrier, repeat step 3. This time however only press the iron for 5-10 seconds. Don't forget to cover it with the backing paper! Your transfer is ready! For more transfers please visit our website:
https://www.printo.com.au