Know Simple Steps To Reset Canon MG3620

Know Simple Steps To Reset Canon MG3620 Are you facing any errors on the Control Panel of the Canon MG3620 printer during the setup? Well, it is frustrating, as resolving them can be a bit difficult. The only solution that can help you in this is the resetting of your printer. So, to Reset Canon MG3620, you need to go follow this blog. This blog will define you with the simple steps to get your Canon printer reset. This reset can bring the Canon printer back to the Factory Reset state. So, you will be ready to start the setup again for your Canon MG3620 printer. Therefore, now, let’s have a look at the steps to reset the Canon MG3620 printer.

Steps to Reset Canon MG3620 Printer There are three different reset operations for the Canon MG3620 printer. The use of these different methods depends upon the reason that led to the reset operation. So, let’s get started with the steps of the first method.

1. Simple Factory Reset For Canon MG3620 Printer Whenever you face any difficulty while operating your Canon MG3620 printer, then you need to factory reset Canon MG3620 printer. So, follow the steps given below carefully.

Step 1: First, turn on your Canon MG3620 printer.

Step 2: Then, the display panel of your Canon printer will show you the menu.

Step 3: From the menu, select the option of Device Settings using arrows.

Step 4: Then, select the OK option.

Step 5: Now, in the last, select the Reset and then tap OK. With this, the reset process for the Canon MG3620 printer will get started. Once it is completed, your printer will be in the factory default state.

2. Power Reset For Canon MG3620 Printer In case, a simple factory reset has not worked out, then a power reset is required for your Canon printer. So for that, go with the following steps: Step 1: In this case, you should turn off your printer first.

Step 2: Also, disconnect all the cables including power and ethernet cable from the printer.

Step 3: Now, keep it as it is for a few minutes like 4-5 minutes.

Step 4: Now, again connect the ethernet cable to your Canon printer.

Step 5: Then, connect the power cable of the Canon printer again, and take the test printout.

If you are able to get the test printout successfully, then your issue is resolved.

But, in case, it has not happened yet, then you need to go with the hard reset procedure.

3. Hard Reset For Canon MG3620 Printer If all the above steps have not worked out for you, then a hard reset is required.

Therefore, go with the following steps: Step 1: With the printer on, keep the stop pressed till the alarm sound comes.

Step 2: Count the alarm sound 19 times.

Step 3: Then, release the Start/Stop button.

Step 4: This will restore the basic factory default for the printer.

Step 5: Now, uninstall and reinstall the printer again in your system, and you are ready to use it.

Therefore, these are the simple steps to reset your Canon MG3620 printer.

The Printer Is In Default State!

Wrapping up! These are the three ways to Reset Canon MG3620. Therefore, with this, you will have your printer settings in default state again. In case you face any trouble with printer rest operation for Canon MG3620, then our expert team is here to help you out. So, get your queries resolved instantly, and get your printer in a working state again.

Contact Us

https://www.printercustomersupport.org/reset-canon-mg3620/