HP Officejet Pro 8600 Printer Failure Error There are various reasons for the HP Officejet pro 8600 printer failure. We must fix the error quickly. Here we discuss various ways to fix the error.
Reset HP Printer
This issue usually occurs when replacing an old ink cartridge with a new one. Ink cartridge changes can cause an
alignment problem with the printhead component as the printer gets older. On the control panel screen of your
printer, you see the error HP missing or failed printhead. Check these steps to complete the reset process.
Realign the Printhead
The next step is to realign the printhead of your device. The
printhead can be located by lifting the lid, detaching the power
cord, and ensuring the carriage is not moving when your printer
is on. After removing the part, it is aligned again. It solves the HP Officejet Pro 8600 printer failure.
Replace with the New Printhead of HP Printers
When you have tried other solutions, and you are still
encountering the HP missing or failed printhead error, then there is a need to consider replacing this part. Check the
warranty before replacing the printhead. If your cartridge
or printhead fails, you can check the warranty to see what it covers. Users can also visit the official website of HP printers and check the various details there.
Clean Ink Cartridges of HP Printer
Whenever you receive the message that the printhead is missing, failed, or incompatible, make sure your HP printer's cartridge is
clean. In case the cartridge isn't clean, you can remove it and wipe
it off. Use a lint-free cloth dampened with distilled water. Cleaning the printhead will be easier with this cloth. Wait until it is
completely dry before inserting it back into the HP printer.