Turk’sheadMill&wirerollingMill
inChina-Precision-Rolls
Turks Head Mill
The Turks head mill is a type of wire rolling mill that uses rotating rollers to flatten the wire, which can then be used to make wire.
Turk HeadMill is a wirerolling mill that uses ahigh-speed steel rolling mill to produce seamless wire. This type of rolling mill is named Turkish Head. The Turkish head rolls the wire from one end to the other, without causing any breakage or other defects in the product. This type of rolling mill is mainly used for the production of seamless steel wire, such as electric wire, wire rope, etc.
Turks Head Mill is also known as Turkish Wire Rolling Mill. It can be used to roll a wide range of products like wires, springs, and more.
Turks Head Mill can be used in different industries such as the automotive industry, chemical industry, etc but it is mostly used in the steel industry where it helps to produce seamless steel wires like electric cables, etc.
Turks Head Mill
TurksHeadMillisawirerollingmillthatmanufactureswirerods,bars, and wire. Turks, who were early in the Chinese steel industry. The company has been owned by the same family since its founding, and currently operates out of facilities located in Zhangjiagang and Hong Kong.
Turk's head mills are a type of rolling mill that is used to produce wire. The machine has two rolls, one for producing round wire, and another for producing flat wire.
The Turks head mill consists of a set of two rollers, each having a diameterofaboutoneinch (25 mm).Theserollsrotatearoundtheiraxis at different speeds depending on the type of material being processed. When a workpiece enters the machine, it is placed between these two rolls and they are rotated together until they meet at their canter point. This createsa flatbar or round wiredepending on whatkind of material is being produced by this machine!
Turks Head Mill
Turks Head Mill is a wire rolling mill, which is used to process the cable of the wire. This mill is used in the industries like steel and steel products etc. The main function of this mill is to provide a continuous feed of continuous wire into the wire roller machine or spooling machine. This machine also helps to reduce production costs by reducing the number of operations needed for producing each unit of the final product.
Wire rolling mill
A wire rolling mill is a type of rolling mill used to produce flat wires. The wire is fed into the machine and guided by a pair of rollers, which also support the wire as it passes through. When the wire reaches the end of its travel, it is cut off and removed from the machine. Wire rolling mills are used to make flat-walled tubes or wires for use in electrical systems, but they can also be used to produce other products such as springs or belts.
The wire rolling mill isused to rollwireinto a desired shape. It is a machine that uses a combination of gravity, heat, and pressure to help create the wire. The wire rollingmillcanalsobe used to make other shapes like bars, tubes, or plates.
The wire rolling mill has several parts including:
1) A roller that rotates at high speed and moves along the surface of the workpiece. The roller is usually madeup of several pieces of metal that have been welded together at their ends so they can move freely over each other as they rotate on their bearings.
2) A set of rollers that are used to hold the workpiece in place while it is being rolled by the main roller above it; These rollers are attached to wooden frames which allowthem to movefreely under gravitybutalso provide support for them as well as keeping them aligned with each other during rotation around their axis at high speeds (upwards).
3) An upper support framethat holdsdown anypieces of materialbeing worked on so they do not move around while being rolled by the main roller above them; this frame should be strong enough not only.
For more information visit our website: - https://www.precisionrolls.com
