Vetarbæklingur Poulsen/Sealey 2018 - 2019

Verkfæratilboð POULSEN EHF

SKEIFUNNI 2, 108 REYKJAVÍK HYRJARHÖFÐA 9, 110 REYKJAVÍK SIMI: 530-5900

www.sealey.co.uk

poulsen@poulsen.is

ÚTFJÓLUBLÁTT VASALJÓS

HÚFA MEÐ LED LJÓSI USB HLAÐANLEG

• Ideal for detecting leaks in air conditioning and cooling systems with the use of fluorescent dye (not included).

• Illumination can be adjusted from spotlight to wide area, by simple push/pull action of the head.

• Features lightweight aluminium housing.

• Battery charged via USB lead (supplied).

• For best results and protection, we suggest this product is used with Model No. SSP46 Light Enhancing Safety Spectacles.

• Removable 4 SMD LED lamp produces up to 120 lumens.

• Three light modes.

• Rechargeable 3.7V 300mAh Lithium-Polymer battery.

• Operating time 2.5-5hr.

• Recharge via USB port.

HANDLJÓS 360° SVART 10 SMD+3W

• Unique and innovative 360° swivel and tilt function enables the light source to be positioned in any direction.

• Exclusive patented design owned and registered to Sealey.

• Each lamp houses 10 super bright SMD LEDs providing up to 400 lumens output with 120° spread of light, illuminating the whole work area.

• Includes an additional high power 3W LED directional torch.

• High quality 2.2Ah Lithium-ion battery for longer life, no memory effect and a much slower discharge than traditional Ni-MH batteries.

• Micro USB charging port.

• Supplied with mains and in-car charger.

066 LED360 • Operating Time Side(High/ Low)/Top: (3/6)/8hr. m eð VSK • Charging Time: 3.5hr.

6,975 kr

066 VS6021

1,995 kr

m eð VSK

1,995 kr

með VSK

HANDLJÓS LED LÍTIÐ 360° SVART

VINNULJÓS 180° ÞUNNT 12 SMD

• Mini, lightweight lamp with unique and innovative 360° swivel and tilt function.

• 2W COB LED produces up to 220 lumens with a CRI-80 rating.

• 1W High power LED directional torch.

• Base magnet and swivel hook for hands-free operation.

• Rechargeable 3.7V 1.5Ah Li-Polymer battery.

• Operating Time (Side/Top): 3/6hr.

066 LED3601 • Micro USB charging port.

• Supplied with high quality með VSK braided USB cable.

• Inspection arm can be rotated 180° and folded back for use as a hands free inspection lamp.

• 12 SMD LED inspection lamp which produces up to 400 lumens, operated by a rolling dimmer switch.

• 1W SMD LED in the end for use as a directional torch.

• Folds away, small and compact.

• 3.7V 2Ah rechargeable Li-ion battery.

• Supplied with USB charging lead.

• Operating Time: 066 LED180 Inspection Lamp (400lm); 3hrs, Directional Torch; 8hrs. með VSK • Charging Time: 3hrs.

4,590 kr

5,695 kr

VINNULJÓS Á FÆTI 360° RAUTT

VINNULJÓS LED 12V MEÐ SEGLI

• Features patented 360° swivel and tilt function enabling light source to be positioned in any direction.

• Work light houses 72 super bright SMD LEDs providing up to 3000 lumens.

• Provides a powerful light to any work area.

• Features high quality 4.4Ah Lithium-ion battery with battery level indicator.

• 2.1A USB output for use as a powerbank.

• Supplied with mains charger.

• Comprises five 3W LEDs. • Magnetic base to allow secure hands-free operation.

• Supplied with a 1.5mtr 12V DC vehicle accessory socket plug.

• Lumen Output: 900lm.

• IP67 Rated.

066 LED360FR

066 LED121

með V S K

með VSK

11,995 kr

066 LED185

4,995 kr

Hand Tools SKRÚFJÁRNA- OG BITASETT 61 STK

LÓÐBOLTI HLAÐANLEGUR 3,7V

• Contents: Screwdrivers; Slotted - 6 x 38, 3 x 75, 4 x 100, 5 x 100, 6 x 100, 6 x 150, 8 x 200mm, Phillips - #0 x 75, #2 x 38, #1 x 100, #2 x 100, #3 x 150mm, Pozi - #0 x 75, #1 x 100, #2 x 100, #3 x 150mm, VDE; Slotted - 3 x 75mm, Phillips - 0 x 75, 1 x 80, 2 x 100mm, TRX-Star* - T20 x 100, T25 x 100, T27 x 100, T30 x 125, T40 x 125mm, Bit Driver, 1/4"Hex Bits; TRX-Star* - T7, T8, T9, T10, T15, Slotted - 4, 6mm, Phillips - #1, #2 (x2), #3, Pozi - #1, #2 (x2), #3, Hex - 3, 4, 5, 6, 7, 8mm, Square - 1, 2, 3mm, Nut Drivers; Metric - 6, 7, 8, 10, 12mm, Imperial - 3/16", 1/4", 5/16", 3/8", 7/16", Magnetizer/Demagnetizer.

• Professional Lithium-ion cordless soldering iron.

• Powered using the latest Lithium-ion battery technology which enables faster heating times and improved battery life.

• Heats up to maximum temperature in 25 seconds.

• Unit is charged and stored in the base and is supplied with a mains charger.

• Charging Time: 3-4 hours.

• Operating Time: 90 minutes.

• Maximum Temperature: 510°C.

066 S01153

5,995 kr m eð VSK

HÖGGSKRÚFJÁRN M/ 8 BITUM HD

• • • • •

Heavy-duty 1/2"Sq drive impact driver.

Composite handle with integral knuckle guard.

Twist reverse for operation in either direction.

Hammer-through cap.

Driver Bits: 36mm & 80mm Long; Slotted - 8, 10mm, Phillips - #2, #3.

með VSK

TANGARSETT 3 STK PREMIUM

066 AK2084

3,695 kr m eð VSK

• Manufactured from hardened and tempered drop forged Chrome Vanadium steel.

• Serrated jaws and precision ground cutting edges, induction hardened 55-65 HRC for cutting hard and soft wires.

• Dual material comfort grip handles and black oxide finish 066 AK8376 for corrosion protection.

• Contents: 200mm Long Nose Pliers, með VSK 175mm Combination Pliers, 160mm Side Cutters.

3,995 kr

VERKFÆRASETT TANGIR OG SKRÚFJÁRN 71 STK

VERKFÆRASETT 25 STK

• Includes a selection of screwdrivers with satin finish Chrome Vanadium shafts and soft grip handles for comfort and control.

• Electrical screwdrivers insulated for use up to 1000V. • Microtip screwdrivers with spinner tops enabling fingertip control.

• Reversible ratchet bit driver for use with an assortment of bits and Chrome Vanadium WallDrive® sockets.

• Combination pliers and long nose pliers.

• Tape measure, insulating tape and mains tester also included to make this comprehensive tool kit ideal for the serious DIY and professional user.

• Comprehensive tool kit ideal for the serious DIY and professional user.

• Includes: - Slotted and Pozi screwdrivers with Chrome Vanadium steel shafts and soft grip handles.

- Combination pliers, long nose pliers and water pump pliers with soft grip handles.

- 8oz Claw hammer with fibreglass shaft.

- Junior hacksaw, universal shears and retractable snap-off knife.

- Ball-end hex key set and adjustable wrench.

- Mains tester, tape measure, insulating tape and PTFE tape.

2

066 SDL6

6,995 kr

066 S0613

5,695 kr m eð VSK

066 S0974

6,995 kr með VSK

TILBOÐIN GILDA FRÁ 1. OKT TIL 31. JAN 2019 EÐA Á MEÐAN BIRGÐIR ENDAST.

Hand Tools HAMAR D-BLOW OG BRASS 680GR

• Brass faced shot-loaded head produces non-sparking, controlled and effective blows without rebound.

• Features comfortable rubber grip.

SLAGHAMAR M/ FIBER SKAFTI

066 BFH24

2,995 kr

m eð VSK

• • • • •

Professional engineer’s set.

Contents: 340g(12oz), 450g(1lb), 680g(1.5lb).

High quality drop-forged steel heads.

Fitted with fibreglass shafts.

Manufactured and tested to BS 876.

066 AK2031

4,795 kr

með VSK

HAMAR D-BLOW

SLAGHAMAR FIBER SKAFT

• Shot-loaded heads produce heavy, controlled and effective blows without rebound.

• • • •

Model No.

Weight

Drop-forged carbon steel head.

Fitted with fibreglass shaft.

Contoured shock absorbing rubber grip.

Manufactured and approved to BS 876.

Sértilboð

Model No.

Weight

Sértilboð

066 DBH630

630g(1.3lb)

1,595 kr með VSK

066 CHF251

1130g(2.5lb)

1,785 kr með VSK

066 DBH1000

1000g(2.2lb)

2,445 kr með VSK

066 CHF401

1800g(4lb)

1,995 kr með VSK

SLEGGJA M/ FIBER SKAFTI

Model No.

Weight

Sértilboð

066 SLHF071

3.2kg(7lb)

3,995 kr með VSK

066 SLHF101

4.5kg(10lb)

4,895 kr með VSK

066 SLHF141

6.4kg(14lb)

5,695 kr með VSK

TILBOÐIN GILDA FRÁ 1. OKT TIL 31. JAN 2019 EÐA Á MEÐAN BIRGÐIR ENDAST.

• • • •

Manufactured from fine grained carbon steel.

Heat treated, induction hardened and tempered with precision ground polished striking face.

Fitted with fibreglass shaft and contoured shock-absorbing rubber grip.

Manufactured and tested to BS 876.

3

Hand Tools GASKVEIKJARI

GASHITARI max 450/550°C

GASHITARI max 1300°C

• Piezoelectric ignition with 1300°C burner flame adjustable from 12 to 35mm.

• Fitted with safety lock and continuous use switch for easy operation.

• Standard fill gives 066 AK2933 approximately 30 minutes continuous operation.

• Powered by Butane m eð VSK (lighter fuel).

• Fitted with piezoelectric ignition with anti-flare burner, ignition lock and continuous flame switch.

• Produces an adjustable flame with a maximum temperature of 550°C and will operate on a single fill for up to 3 hours.

• Supplied with a deflector nozzle ideal for use with heat shrink tubing and 066 AK2935 concentrator nozzle for use when paint stripping.

• Includes integrated hands-free með VSK collar.

• Professional micro design featuring piezoelectric ignition.

• Fitted with anti-ignition cap to prevent accidental operation.

• Unit produces flame of up to 1300°C and will operate for up to 30 minutes on a single fill.

• Features adjustable flame 066 AK4042 control and continuous flame switch.

• Powered by Butane með VSK (lighter fuel).

1,995 kr

12,335 kr

2,695 kr

Air Tools SLÍPISETT LOFT M/ STROKLEÐRI OG BURSTUM

SLÍPIVÉL LOFT M/BELTI 10x330mm

Aluminium housing with articulated sanding arm.

Features belt tracking control, heavy-duty nose roller and one-handed trigger operation.

Composite handle with exhaust reduces chill and noise level.

Suitable for sanding otherwise inaccessible 066 SA635 areas such as around door-shuts.

• Supplied with three belts. m eð VSK • Replacement belts readily available.

• Composite cover moulded around lightweight aluminium alloy housing reduces effects of chill on operator’s hands and provides added control.

• Air motor with quality bearings for smooth and powerful operation.

• Exhaust outlet adjusts 360° keeping airflow away from operator.

• Suitable for cutting intricate shapes in steel up to 1.5mm thick.

• Punch and die may be rotated through 360° to aid access and obtain maximum consumable life.

• Free Speed: 3200spm.

• Weight: 0.93kg.

• Suitable for the professional workshop.

SKERI F/LOFT 75MM 20,000RPM

SLÍPISETT LOFT M/STROKLEÐRI OG BURSTUM

• Composite cover moulded around lightweight aluminium alloy housing reduces effects of chill on operator’s hands and provides added control.

• Air motor with quality bearings for smooth and powerful operation.

• Exhaust outlet adjusts 360°, keeping airflow away from operator.

• Fitted with metal safety guard and safety trigger to prevent inadvertent operation.

• Suitable for the professional workshop.

• Complete kit for a variety of body preparation tasks.

• Includes pinstripe removing pad, abrasive wheel and two wire wheels.

• Air tool features two handles for maximum control during use.

• Supplied in storage case.

• Suitable for the professional workshop.

• All pads/wheels available separately.

• • • •

4

18,995 kr

066 SA650

8,995 kr

m eð VSK

066 SA649

9,895 kr

með VSK

066 SA695

36,965 kr með VSK

TILBOÐIN GILDA FRÁ 1. OKT TIL 31. JAN 2019 EÐA Á MEÐAN BIRGÐIR ENDAST.

Air Tools LOFTLYKLAR

B

A

D

C

or

Ref • Combination of composite materials, alloyed metals and twin hammer design result in lightweight, durable and powerful air impact wrenches.

• Soft grip handle with downward facing exhaust make these wrenches comfortable on the hands and ears and limits the circulation of brake dust on wheel applications.

• Fingertip control of power and direction via lever on rear of wrench.

A

Model No.

Drive

Max. Torque

Air Consumption

Sértilboð

066 GSA6000

3/8"Sq

442lb.ft(600Nm)

8.5cfm

14,995 kr með VSK

B

066 GSA6002

1/2"Sq

590lb.ft(800Nm)

17.6cfm

17,995 kr með VSK

C

066 GSA6004

3/4"Sq

1180lb.ft(1600Nm)

30cfm

39,995 kr með VSK

D

066 GSA6005

1"Sq

1475lb.ft(2000Nm)

38cfm

49,995 kr með VSK

LOFTLYKILL 1/2"

LOFTLYKILL 1/2" 986/1122 Nm

Working/Maximum Torque: 500lb.ft(678Nm)/580lb.ft(787Nm).

Ultimate Torque: 680lb.ft(924.8Nm).

Twin hammer mechanism.

Lightweight and durable design.

Soft grip handle, with downward facing exhaust, reducing noise level and circulation of brake dust on wheel applications.

• Fingertip control of power.

• Direction via lever on rear of wrench.

• Suitable for professional garage use.

• • • • • • • • • •

• • • • •

066 GSA6006

18,995 kr m eð VSK

TILBOÐIN GILDA FRÁ 1. OKT TIL 31. JAN 2019 EÐA Á MEÐAN BIRGÐIR ENDAST.

Working/Maximum Torque: 650lb.ft(880Nm)/700lb.ft(950Nm).

Ultimate Torque: 900lb.ft(1220Nm).

Specially designed motor works on low air consumption.

Lightweight composite casing.

Two extruding edge strips help protect housing.

One hand operation.

Three speed selector switch.

Handle exhaust lowers noise level.

Soft grips to help reduce vibration and chill.

Suitable for professional garages.

066 SA6002

29,995 kr með VSK

5

Blasting SÓDABLÁSTURSKÚTUR KIT 18 KG

SANDBLÁSTURSKÚTUR 37 LTR

• Kit includes: - 37ltr Shot Blaster with Water Trap & Wheels - Soda Blasting Conversion Kit for SB997 - Leather Welding Gauntlets Lined - Pair - Safety Goggles Indirect Vent - Disposable Dust Mask FFP2S - Pack of 10 - 25kg Blasting Soda - Bag • Pressurised tank for maximum power.

• Supplied with 2.4mtr rubber hose, five ceramic nozzles and in-line water trap for moisture-free grit blasting.

• Also includes bayonet air line coupling and airflow regulator.

• Accepts a variety of grits up to 700microns and is suitable for stripping rust and paint from wheels, chassis, panels and other corroded/painted surfaces.

066 SBKIT

066 SB997

53,995 kr

29,995 kr

með V S K

með VSK

SANDBLÁSTURSKANNA

SANDBLÁSTURSBYSSA

• Air Pressure: 90-100psi.

• Air powered recirculation system.

• Supplied with a set of rubber nozzles for sealing the gun head to the panel.

• Supplied with 700g bottle of grit.

• Sets of replacement nozzles are available.

066 SG10

9,495 kr m eð VSK

BLÁSTURSSÓDI 25 KG

• Blasting soda for use in conjunction with Model No’s SB99.KIT, PSB10, PSB40 and other brands of soda blasters.

• Soda blasting is especially suitable for classic car restoration when removing paint and rust.

• Will not etch glass and will not warp or remove metalwork.

• Surface will be left smooth.

• Soda leaves a rust inhibitor behind for up to 6 weeks.

• Grade/Size: Extra Coarse/285microns.

• Suitable for removing rust, paint, mould, grease, from fibreglass, brick, stone, marble, tiles, glass, rubber and bearings.

6

• Suitable for use in the bodyshop.

• Feathering action makes it ideal for treating stone chips.

• Supplied with a set of four rubber nozzles and a 700g bottle of blasting grit.

• Replacement nozzles are available.

066 SG10E

4,445 kr

með VSK

SANDBLÁSTURSSANDUR 25KG

• Suitable for workshop, hand-held and recirculating shot blasters and complies with COSHH SI-1657-1988.

• Packaged to last, the composite tub with carry handle helps keep the grit less susceptible to moisture, debris and is easier to manoeuvre.

• Not suitable for use in shot blasting cabinets.

066 SBG25KG

066 BGT25KG

m eð VSK

með VSK

8,995 kr

3,495 kr

TILBOÐIN GILDA FRÁ 1. OKT TIL 31. JAN 2019 EÐA Á MEÐAN BIRGÐIR ENDAST.

Consumables SLÍPIKLOSSI 70 X 130MM

SLÍPIKLOSSI STÓR 70 X 210MM

• Accepts 100mm wide abrasive strips.

• Comfortable contoured grip.

• Interlocking grip and base separate completely for very simple and fast abrasive changes.

066 SB66

595 kr

m eð VSK

• Accepts 100mm wide abrasive strips.

• Comfortable contoured grip.

• Abrasive firmly retained by integral pins.

• Size: 70 x 210mm.

066 SB68

595 kr

með VSK

VÍRBURSTI GRÓFUR F/SA695

SCOTCHBRITE HJÓL F/SA695

VÍRBURSTI FÍNN F/SA695

• Angled wire wheel for Model No. SA695 Smart Eraser Kit.

• Abrasive wheel for Model No.SA695 Smart Eraser Kit.

• Straight wire wheel for Model No. SA695 Smart Eraser Kit.

066 SA695WA

066 SA695A

066 SA695WS

m eð VSK

með VSK

með VSK

3,995 kr

2,495 kr

O-HRINGJASETT 419 STK Í MM

• Manufactured from Buna-N. • Suitable for personal & professional workshops, garages and plumbing.

• Supplied in partitioned interspaced box.

3,495 kr

BORASETT COBALT 1-10MM 19STK

066 BOR419

1,995 kr

m eð VSK

TILBOÐIN GILDA FRÁ 1. OKT TIL 31. JAN 2019 EÐA Á MEÐAN BIRGÐIR ENDAST.

• Fully ground HSS with 5% Cobalt makes these ideal for drilling extra hard materials.

• 135° Split point tip enables bits to bite workpiece quickly, reducing the need for centre mark.

• Drills can be re-sharpened without affecting their performance.

• Supplied in metal storage case.

• Sizes: 1-10mm in 0.5mm increments.

066 AK4701

5,495 kr

með VSK

7

Consumables BREMSUNIPPLASETT 200 STK • Brake pipe fitting to suit 3/16" and 1/4" pipe sizes.

• Yellow Chrome Finish: Metric.

• Bright Silver Finish: Imperial.

• Contents (Approximate Quantity): Ø3/16" Pipe; 3/8"UNF x 24tpi Long Female (x10), M10 x 1mm Short Female (x30), 3/8"UNF x 24tpi Long Male (x10), M10 x 1mm Short Male (x100), M10 x 1mm Long Male (x5), M10 x 1mm Full Thread Male (x15), M10 x 1.25mm Long Male (x5), M10 x 1.25mm Short Male (x5), 3/8"BSF x 20tpi Long Male (x5), M12 x 1mm Part Thread Male (x5), Ø1/4" Pipe; 7/16"UNF x 20tpi Male (x5), 12mm x 1mm Male (x5).

RÖRASPLITTI 300 STK MM

• Spring roll pins assortment.

• Contents (Approximate Quantity): Diameter x Length; Ø2.5 x 25, 2.5 x 30, 3 x 24, 3 x 40, 4 x 25, 4 x 40, 5 x 24, 5 x 40, 6 x 25, 6 x 40, 8 x 25, 8 x 55mm (25 of each).

• Supplied in partitioned box.

066 AB068BPN

066 AB007RP

m eð VSK

með VSK

1,995 kr

5,995 kr

KLOFSPLITTI STÓR 230 STK SETT

HRINGSPLITTI INN/ÚT Í MM

• Split pin assortment.

• Contents (Approximate Quantity): 3/32" x 1-1/12"(2.4 x 38mm) (x100), 5/32" x 2" (4 x 51mm) (x70), 3/16" x 2" (4.8 x 51mm) (x25), 1/4" x 3" (6.3 x 76mm) (x15), 19/64" x 4" (7.5 x 102mm) (x20).

• Supplied in partitioned box.

• Internal and external circlip assortment.

• Contents (Approximate Quantity): External Sizes; 11 (x20), 13 (x15), 16 (x15), 19 (x10), 21 (x10), 22 (x10), 25 (x5), 30 (x5), 35 (x5), 38 (x5), Internal Sizes; 11 (x20), 13 (x15), 16 (x15), 19 (x10), 21 (x10), 22 (x10), 25 (x5), 30 (x5), 35 (x5), 38mm (x5).

• Supplied in partitioned box.

066 AB003SP

066 AB017CC

1,995 kr

1,595 kr

m eð VSK

með VSK

Power Tools HRÆRA RAFMAGNS 120L

• Powerful electric mixer with a mixing volume of up to 120ltr.

• Six speed settings and soft start allow for greater control when mixing.

• Supplied with two mixing paddles capable of mixing paint, varnish, tile adhesive, cement, plaster, mortar as well as a number of other liquid and dense materials.

• Lightweight at only 7.5kg.

• Fitted with over 2mtr of power cable.

066 PM120L

18,995 kr með V S K

8

BORVÉL 18V LITHIUM

• Compact, cordless hammer drill/driver with 0.8-10mm keyless chuck.

• Forward, reverse and lock function with high/low speed selection and 18 torque settings.

• Powered by 18V Lithium-ion battery.

• Integral LED work light and LED battery level indicator.

• Features a metal belt clip for safer storage while not in use.

• Drilling Capacity: 20mm Wood/10mm Metal & Concrete.

• Maximum Torque: 31Nm. • Battery: 18V 1.5Ah Li-ion.

• Supplied in storage case with battery and 1 hour mains charger.

066 CP18VLD

10,995 kr með VSK

TILBOÐIN GILDA FRÁ 1. OKT TIL 31. JAN 2019 EÐA Á MEÐAN BIRGÐIR ENDAST.

Lubrication SMURSPRAUTA 18V SEALEY

SMURSTÚTUR QUICK RELEASE

• High power, professional, cordless grease gun, developing 8000psi.

• Ideal for in-field lubrication where power and speed are required.

• Suitable for screw type and standard 400g cartridges, manual or bulk filling.

• Features LCD battery condition indicator, air bleed and heavy-duty aluminium pressure head.

• Supplied with 18V 2Ah Lithium-ion battery and mains charger.

• Supplied in carry-case.

• Manufactured with heat treated steel designed to withstand high pressures without deformation.

• Fitted with 1/8" BSPT female thread which enables this coupler to be used with multiple pieces of grease equipment, including manual grease guns, air grease guns, electric grease guns and bulk bucket greasers.

• Ingenious design enables this coupler to firmly latch onto the grease fitting enabling hands-free operation compared to standard grease couplers, meaning less wasted grease around the fitting.

• Fitted with a quick connect/disconnect lever which enables unit to be disconnected easily with up to 8000psi of pressure.

• Eliminates the issue of disconnecting a standard coupler from a pressurised condition, which often leads to broken fittings and damaged coupler jaws.

066 CPG18V

24,795 kr m eð VSK

TUNNUDÆLA FYRIR ADBLUE

• Self-priming lever pump fitted with anti-drip nozzle, 2"BSP connector and dip-tube to suit 100 or 205ltr drums.

• Added filter in pump to prevent any unwanted large particles getting into fluid system.

• Specially constructed with Viton® seals for transferring AdBlue®.

• 1" x 2000mm Hose for hands-free applications.

• Approximately 330ml per stroke discharge.

066 AK45

3,495 kr

með VSK

OLÍUSOGKÚTUR LOFT 9LTR

066 TP6607

10,995 kr

• 9ltr Capacity device constructed from composite materials.

• Uses compressed air supply to generate vacuum.

• Suitable for the extraction of all types of engine, transmission and lubricating oil from cars, motorcycles, marine engines, stationary engines and industrial machinery.

• Also suitable for low viscosity fluids such as water.

• Supplied with Ø6 and Ø10mm suction probes and 1100mm brake/clutch bleeding hose.

• Uses probes to extract engine oil through the dipstick tube.

m eð VSK

OLÍUAFFALLSTANKUR 65LTR

• Steel fabricated 65ltr reservoir and telescopic steel drain pan fitted with grid filter.

• Air discharge drain with hose.

• Fitted with reservoir oil level indicator tube.

• Min./Max. Pan Height: 1070/1590mm.

066 AK451DX

35,885 kr me ð V S K

TILBOÐIN GILDA FRÁ 1. OKT TIL 31. JAN 2019 EÐA Á MEÐAN BIRGÐIR ENDAST.

066 TP6903

15,995 kr með VSK

OLÍUSUGA HAND 6.5LTR

• Ingenious vacuum device.

• Ideal for other liquids such as water and soluble oil.

• Supplied with Ø5.8 and Ø6.7mm sprung steel lined suction probes and a Ø9.8 x 1mtr extension tube.

• Probes can be stored in the holder when not in use.

• To remove oil from a car engine, simply push the probe down the dipstick hole and pump the handle on the top of the unit.

• Sets up a permanent fluid transfer while you do something else.

• Internal float valve for automatic cut off when unit has reached maximum capacity.

• Avoids searching for drain plug keys and getting under the vehicle.

• Ideal for mobile mechanics.

• Unit can be tipped 90° for easier emptying.

066 TP69

9,995 kr með VSK

9

Jacking & Lifting GÍRKASSATJAKKUR 1000 KG

GÍRKASSATJAKKUR 500 KG

• Min./Max. Saddle Height: 1075/1895mm.

• High speed lift to gearbox - just lift piston.

• Foot pedal operation keeps hands free.

• Spring loaded dead man’s safety release control reduces the risk of inadvertent lowering.

• Highly manoeuvrable on castors.

• Min./Max. Saddle Height: 1100/1910mm.

• Foot pedal operation keeps hands free.

• Spring loaded dead man’s safety release control reduces the risk of inadvertent lowering.

• Highly manoeuvrable on castors.

066 1000ETJ

066 500ETJ

46,995 kr

29,995 kr

með V S K

með VSK

VÉLASTANDUR 450KG

• Accepts wide variety of engines and transmissions.

• Head swivels through 360°.

• Swivel castors.

• Fully adjustable mounting arms.

HJÓLATJAKKUR LOFTPÚÐA 3T F/LOFT

066 ES450

12,995 kr m eð VSK

• Min./Max. Height: 135/450mm.

• Air Consumption: 10.5cfm.

• Lightweight and portable with 667mm handle and 2 composite wheels for manoeuvrability.

• Can be stored vertically to save space.

• Robust high resistant diaphragm for durability.

• Internal, military gauge steel, telescopic interlocking core.

• Overload safety and air vacuum valve for rapid lowering.

• Ideal for workshop or roadside use, takes the effort out of lifting heavy plant, tractors and commercial vehicles.

• Suitable for use in high risk environments such as mining or the petroleum industries.

• Fast lift, can reach maximum height in 25 seconds.

066 PAFJ3

65,650 kr með VSK

VINNUPALLUR 2 ÞREP ÁL • Platform Height: 605mm.

• Platform Size: 300 x 800mm.

• Foldable and portable 2-tread aluminium platform with 115kg capacity.

• Large, ribbed non-slip platform and treads for safe and easy manoeuvrability.

• Durable aluminium alloy frame with ribbed feet for extra stability.

• Safety locking catches on legs.

• Folds flat for easy storage and transportation.

066 APS2E

8,995 kr

með VSK 10

TILBOÐIN GILDA FRÁ 1. OKT TIL 31. JAN 2019 EÐA Á MEÐAN BIRGÐIR ENDAST.

Jacking & Lifting LEGUBRETTI HÆGT AÐ BRJÓTA SAMAN

• • • • • • •

LEGUBRETTI HÆGT AÐ BREYTA Í STÓL

Heavy-duty steel.

Quickly folds to aid storage.

Powder coat paint finish. Ø60mm Composite castors with ball bearing swivels.

Vinyl covered back and headrest.

Size (L x W x H): 910 x 425 x 100mm.

Folded Size (L x W x H): 450 x 425 x 120mm.

• • • •

066 SCR75F

5,995 kr m eð VSK

• • • •

Heavy-duty steel.

Powder coat paint finish.

Six Ø60mm castors on ball bearing swivels.

Dual application: flat creeper or folded up as mechanic’s seat.

Supplied flat.

Converts to seat mode in seconds.

Creeper Mode (L x W x H): 1010 x 440 x 145mm.

Seat Mode (L x W x H): 560 x 440 x 415mm.

066 SCR78

9,495 kr

með VSK

VINNUSTÓLL M/SKÚFFU Á HJÓLUM

VINNUSTÓLL Á HJÓLUM 380-500MM

DOLLY M/SNÚ HJÓLUM 680KG F/BÍL

• Swivel action seat.

• Lever operated gas sprung height adjustment between 390 and 520mm.

• Padded cushion for added comfort.

• Five Ø60mm ball bearing castors.

066 SCR10 • Base doubles as temporary tool and m eð VSK component storage tray.

• Swivel action seat.

• Gas sprung height adjustment between 380mm and 500mm.

• Padded cushion.

• Five Ø60mm ball bearing 066 SCR15 castors.

• Base doubles as temporary með VSK storage tray.

• • • •

6,495 kr

8,595 kr

SÆTISYFIRBREIÐSLA F/ 2 STÓLA

• Set includes two reuseable front seat covers.

• Manufactured from heavy-duty water resistant nylon.

• Ideal for protecting the vehicle’s interior from dirt, grease and oil, as well as food and drink spills.

• Suitable for most cars and light commercial vehicles.

• Can be fitted to seats with or without airbags.

Can handle up to 250mm profiles.

Fitted with four Ø75mm metal castors, two lockable.

Heavy-duty steel plate with rust resistant finish.

Each dolly features a side handle for easy carrying.

066 WS681 • Suitable for use in bodyshops and með VSK workshops.

12,995 kr

SÆTISYFIRBREIÐSLA F/STÓL/BEKK

066 CSC6

2,795 kr

m eð VSK

TILBOÐIN GILDA FRÁ 1. OKT TIL 31. JAN 2019 EÐA Á MEÐAN BIRGÐIR ENDAST.

• Set includes driver and twin passenger reuseable seat covers.

• Manufactured from a heavy-duty waterproof nylon.

• Ideal for protecting the vehicle’s interior from dirt, grease and oil, as well as food and drink spills.

• Also helps to protect against general wear and tear of a vehicle’s interior when getting in or out.

• Ideal protection against dirty overalls.

066 CSC7

3,895 kr

með VSK

11

Vehicle Service BILANAGREINIR V-SCAN PRO • The V-Scan Pro diagnostic tool is a fast wireless multitasking operating system.

• Includes the most extensive coverage of OE-level diagnostics, allowing independent garages to provide a complete diagnostic service for cars, SUVs and vans.

• Doesn’t lockout when updates have expired.

• Future 1 year update cost £499.95 + VAT

VSCANP TECH SPECS Central Processing Unit (CPU):

Intel Quad-Core Processor 1.86GHz

Internal Battery:

3.7V 8500mAH Li-Poly

Operating System:

Android 4.4

Weight:

0.70kg

Hard Drive:

32GB

Camera (Rear):

5.0 Megapixel

Touch Screen Display:

8 inch - 1280 x 800

Camera (Front):

2.0 Megapixel

Boot-Up Time:

25 seconds

✔

Wi-Fi:

✔

Wireless VCI:

SLÍPISETT F/ FELGUBOLTA

• Removes surface dirt and corrosion on hubs fitted with studs.

• Ideal for preparing wheels, hubs and brake discs or drums for re-assembly.

• Cleaning discs fit over wheel studs.

• Use with power drill or 066 VS8002 air impact wrench.

• Supplied with 1/2"Sq drive adaptor. m eð VSK

7,995kr

BREMSUDÆLU ÞVINGU SETT 18STK

Subscription Based On-Line Updates:

SLÍPIPLATTAR F/ VS8002

• Stud hub cleaning pads for Model No. VS8002.

066 VS8002A

6,695kr

með VSK

RÖRSKERI F/ BREMSURÖR

SÉRPÖNTUN

✔

066 VSCANP

346,110 kr með VSK

BREMSU- OG KÚPLINGSVÖKVA KÚTUR

• One-man brake and clutch bleeding the professional way.

Bleeding requires no external power source simply fill and pump.

• Pressure range makes unit suitable for use with ABS systems.

• Fitted with Ø42mm cap with 90° angled connector which is suitable for most European models.

• For other applications, order optional Brake Reservoir Cap 42mm Straight Connector Model No. VS820SA, Universal Adaptor Model No. VS820UA and Bleeder Cap Set Model No. VS0204B.

066 VS820

8,495kr

með VSK

HNÍFUR F/ VS0350

• Suitable for push-back and wind-back brake pistons.

• Includes left and right-handed thrust bolt assemblies, 066 VS0282 reaction plate, hex bits and adaptors and includes m eð VSK the three pin VAG adaptor.

6,785kr

12

• Patented design ensures that the spring mechanism maintains the correct cutting pressure on the pipe at all times.

• Features a smooth screw 066 VS0350 action and nickel plated blade for increased með VSK cutting performance.

2,695 kr

• Cutter wheel for Model No. VS0350.

066 VS0350B

1,195 kr

með VSK

TILBOÐIN GILDA FRÁ 1. OKT TIL 31. JAN 2019 EÐA Á MEÐAN BIRGÐIR ENDAST.

Vehicle Service SMELLUKLÆÐNINGALOSARI SETT

SPENNUJÁRN “MINI” NÆLON 3 STK 83MM

• Ideal for removing interior trim, vents and battery replacement on key fobs.

• Slim profile and manufactured from resilient nylon to minimise panel damage and marking.

TOPPUR 22MM F/ SÚREFNISSKYNJARA 3/8

• 22mm Hardened and tempered Chrome Vanadium steel socket with blackened finish.

• Suitable for heated and unheated oxygen sensors.

• Cut-out section allows socket to pass over wiring.

066 SX022

995 kr

m eð VSK

066 RT014

995 kr

m eð VSK

• Comprehensive set, designed to simplify trim and trim stud removal.

• Manufactured from resilient nylon to minimise panel damage and marking.

• Includes eleven trim and upholstery tools, plus trim hammer in a heavy-duty storage pouch.

með VSK

HERSLUGÍR 65:1

• Suitable for oxygen sensors found on most modern vehicles.

• Cut-out and slots enable sockets to be fitted over wiring harness.

• Includes two chasers for cleaning and repairing damaged threads..

• Ideal for removing/installing wheel nuts on commercial and light commercial vehicles when air impact wrench is not easily accessible.

• Supplied in carry-case with 066 SX500 two impact sockets and 210mm extension.

066 SX0320

2,995 kr með VSK

FROSTLÖGSMÆLIR F/ SÝRU OG AdBlu

• Accurately measures the strength of battery fluid, screenwash and antifreeze by measuring the refractive index of light passing through the mixture.

• Suitable for synthetic antifreeze mixtures including long life OAT (Organic Acid Technology) and G13.

• Temperature corrected prism ensures accuracy.

• Eyepiece with adjustable focus.

• Supplied with pipette 066 VS005 and storage case.

• Accurately measures the strength of battery fluid, screenwash, antifreeze and AdBlue® by measuring the refractive index of light passing through the mixture.

• Suitable for synthetic antifreeze mixtures including long life OAT (Organic Acid Technology), G13 and aqueous/urea content of AdBlue®.

• Temperature corrected prism ensures accuracy.

• Eyepiece with adjustable focus.

• Simple calibration check 066 VS0052 using distilled water.

• Supplied with pipette með VSK and storage case.

7,795kr

2,690 kr

TOPPA- OG HREINSISETT F/ SÚREFNISSKYNJARA 5 STK

FROSTLÖGSMÆLIR F/ SÝRU OG RÚÐUVÖKVA

m eð VSK

066 RT12KIT

TILBOÐIN GILDA FRÁ 1. OKT TIL 31. JAN 2019 EÐA Á MEÐAN BIRGÐIR ENDAST.

8,995kr

12,995 kr með VSK

BREMSUVÖKVA PRUFARI M/SUÐU

• The approved method of testing the water content of brake fluid.

• Just 3% of moisture can lower the brake fluid boiling point by over 100°C. • The best way to detect this small water content is to measure the boiling point of the fluid.

• The unit incorporates a heater element, LCD display and a power lead for use on 12V dc power supplies.

• Works on DOT 3, 4, 5 and 5.1 066 VS0275 specification fluids.

29,995kr með VSK

13

Vehicle Service RÖRASKERI KEÐJU F/PÚST

HOSUKLEMMUTÖNG MEÐ BARKA

BREMSURÖRA AFRÉTTARI

• Suitable for cutting exhaust pipes and steel or copper tubing up to Ø83mm.

• Plier design handles allow for even cutting pressure and enables access where space is restricted.

• 90° Handle movement 066 VS16372 produces a 360° cut.

• Handle Length: 200mm. m eð VSK • Maximum Thickness: 2.5mm.

• Reinforced long reach tool designed to get to awkwardly positioned tag type hose clips.

• Resistant cable housing holds clamp head for controlled positioning.

066 VS1673 • Features ratchet action for close control.

SLÍPISETT F/ HJÓLANAF

SLÍPIPLATTI F/ VS8001

4,595 kr

• Removes surface dirt and corrosion on hubs that use wheel bolts.

• Ideal for preparing wheels, hubs and brake discs or drums for re-assembly.

• Use with 1/2"Sq drive.

066 VS8001

8,595 kr m eð VSK

7,695 kr með VSK

• Cleaning disc for Model No. VS8001.

• Model No. VS8001A

• Brake pipe straightener designed for use on automotive applications.

• This unique design is fast and easy to use.

• Suitable for 3/16"(4.76mm) cupro-nickel, copper and steel pipe.

• Features hole for marker pen.

066 VS5056

995 kr

með VSK

OLÍUSÍUBAND M/HERSLU 65-105 MM

066 VS8001A

3,495 kr með VSK

• Features textured high grip steel strap with comfort grip handle 066 AK6441 and control knob.

• Removes filters with með VSK minimal risk of damage.

1,795 kr

SPANHITARI 1000W

• Mobile induction heater for fast heat delivery.

• Install appropriate coil and place over or around ferrous metal.

• Ideal for loosening stubborn and seized fixings.

• Supplied with induction pad for plastic trim/sticker removal.

• Induction element delivers high heat fast and effectively.

• Contents: Direct Coil; Ø20, Ø32mm, Pad Coil; Ø55mm, U-Coil; 430mm, Flex Coil; 830mm.

066 VS240

79,995 kr me ð V S K

14

TILBOÐIN GILDA FRÁ 1. OKT TIL 31. JAN 2019 EÐA Á MEÐAN BIRGÐIR ENDAST.

Machine Shop NAGARI F/ BORVÉL

VÍRBURSTI M/ SKÖFU

• Wooden stocked brush with steel fill.

• Fitted with steel scraper.

• Suitable for general purpose applications.

066 WB03

265 kr

með VSK

SKURÐARSTANDUR F/SLÍPIROKK • Turns an electric or air drill into a versatile nibbler suitable for cutting intricate shapes in various materials.

• Double end punch allows handle to be removed and re-attached to opposite side for longer periods of use.

PINNI Í SNA9821

066 SNA9821

3,995 kr m eð VSK

STYRING Í SNA9821

• Cut-off stand with solid cast-iron base for precise vertical cutting using an angle grinder.

• Supplied with vice which mounts onto the base to secure the workpiece.

• Suitable for cuts of up to 18mm.

• Can be used with all Sealey 100mm, 115mm and 125mm angle grinders, plus most other branded grinders of the same size.

• Angle Grinder not included.

• Die for Model No. SNA9821.

• Punch set for Model No. SNA9821.

066 SNA9821P

066 SNA9821D

066 SMS02

m e ð VSK

m eð VSK

með VSK

595 kr

565 kr

BORSTANDUR F/ BORVÉL

• Drill stand with cast iron base for vertical drilling using a hand drill.

• Supplied with 65mm drill vice with quick jaw release.

• Features a preset depth control and stop for drilling depths of up to 60mm, ideal for accurate and repetitive drilling.

• For use with hand drills with a collar diameter of 38mm if used with the adaptor bush or 43mm if used without.

066 DS01

4,995 kr með V S K

TILBOÐIN GILDA FRÁ 1. OKT TIL 31. JAN 2019 EÐA Á MEÐAN BIRGÐIR ENDAST.

3,695 kr

VINNUBORÐ M/ ÞVINGU, SAMANBRJÓTANLEGT

• • • • • • •

Multifunctional worktop.

Quick and easy to use.

Strong construction.

Handy tool storage on fold flat legs.

Working height: 785mm.

Width: 605mm.

Simple to assemble.

066 FWB1

3,995 kr með VSK

15

Storage GEYMSLUKASSI 12 SKÚFFUR

GEYMSLUKASSI 18 SKÚFFUR

• Tough and durable housing, contains 12 impact resistant composite drawers.

• Ideal for storing a mixture of small to large fixings and components.

• Fitted with four fixing points for wall mounting or can be bench mounted 066 APDC12HV (freestanding).

• Overall size (W x D x H): m eð VSK 260 x 160 x 265mm.

• Tough and durable housing, contains 18 impact resistant composite drawers.

• Ideal for storing a mixture of small to large fixings and components.

• Fitted with four fixing points for wall mounting or can be 066 APDC18HV bench mounted (freestanding).

• Overall Size (W x D x H): með VSK 380 x 160 x 475mm.

• Tough and durable housing, contains 39 impact resistant composite drawers.

• Ideal for storing a mixture of small to large fixings and components.

• Fitted with fixing points for wall mounting or can be 066 APDC39HV bench mounted (freestanding).

• Overall Size (W x D x H): með VSK 380 x 160 x 475mm.

VERKFÆRAKISTA M/ 3 SKÚFFUM 93 STK

VERKFÆRAKISTA Á HJÓLUM ÞRÍSSKIPT

VERKFÆRAKASSAR M/DOLLY , STAFLAST

1,795 kr

• 3 Drawer Topchest.

• Overall Size (W x D x H): 510 x 225 x 300mm.

066 AP9243BBCOMBO

16,995 kr

3,495 kr

• Mobile toolbox with heavy-duty wheels for added manoeuvrability.

• Features an extendable handle allowing easy transportation.

• Separates into three units.

• Top box with tote tray.

• Middle box with two ball bearing runner drawers.

• Base unit is an open top bin providing storage space for larger items.

• Overall Size (W x D x H): 495 x 280 x 720mm.

066 AP548

20,995 kr með VSK

m eð VSK

DOLLY FYRIR DEKK

3,995 kr

• Package includes: • Toolbox - Small • Overall Size (W x D x H): 445 x 310 x 130mm.

• Toolbox - Medium • Overall Size (W x D x H): 445 x 310 x 150mm.

• Toolbox - Large • Overall Size (W x D x H): 445 x 310 x 250mm.

066 AP8STACK

13,995 kr með VSK

VINNUBORÐ 1,5M RYÐFRÍTT STÁL

• Tyre storage/transport dolly ideal for use with up to eight tyres.

• Four Ø75mm swivel TPR castors, one featuring a brake providing smooth and quiet manoeuvrability around the workplace.

• Overall Size (W x D x H): 640 x 640 x 110mm.

066 STR006 • Maximum Weight Capacity: 136kg.

4,995 kr m eð V SK

16

GEYMSLUKASSI 39 SKÚFFUR

• Galvanized steel frame with a 430 grade stainless steel worktop.

• Adjustable bottom shelf.

• Bench Top Capacity: 100kg.

• Bottom Shelf Capacity: 45kg.

• Adjustable feet for levelling the workbench on an uneven surface.

• Supplied flat packed.

066 AP1560SS

29,995 kr með VSK

TILBOÐIN GILDA FRÁ 1. OKT TIL 31. JAN 2019 EÐA Á MEÐAN BIRGÐIR ENDAST.