Catálogo_Matte_INGLÊS

Page 1

CATALOGUE

POLO MATTE Get to know the BOPP MATTE family

@polofilms


M AT T E

FAM I LY

TMA Matte BOPP Film Heat-sealable Surface treatment for printing and/or lamination

MAIN CHARACTERISTICS Heat-sealable on one or both surfaces; Internal or external surface treatment; Matte surface providing satin effect and soft touch; Excellent performance in horizontal and vertical filling machines.

MOST COMMON APPLICATIONS Flexible packaging for foods: biscuits, snacks, chocolates, cereal bars and doughs; Flexible packaging for non-foods: pet food; paperboard lamination and graphics applications in general; Designed for HFFS - Horizontal Form Fill Seal and VFFS - Vertical Form Fill Seal filling processes.

STORAGE CONDITIONS All products are stored in dry, protected and clean environments, and are shipped under the same conditions in any mean of transportation. It is recommended that storage and transportation are carried out at a temperature of around 30° C and relative humidity of 60%. If the temperature is not at the recommended level, the following problems might occur: - Surface treatment level reduction which, at a later stage, might hinder printing and/or lamination; - Film transparency reduction; - Excessive CoF reduction, which might hinder processing and machinability. It is recommended that BOPP films are kept at operating room temperature for 24 hours before use.


TMA.PLN Matte BOPP Film Non heat-sealable Surface treatment for printing and/or lamination

MAIN CHARACTERISTICS Non heat-sealable film; Internal or external surface treatment; Matte surface providing satin effect and soft touch; Excellent performance in horizontal and vertical filling machines.

MOST COMMON APPLICATIONS Flexible packaging for foods: biscuits, snacks, chocolates, cereal bars and doughs; Flexible packaging for non-foods: soaps, pet food, paperboard lamination and graphics applications in general; Designed for HFFS - Horizontal Form Fill Seal and VFFS - Vertical Form Fill Seal filling processes.

STORAGE CONDITIONS All products are stored in dry, protected and clean environments, and are shipped under the same conditions in any mean of transportation. It is recommended that storage and transportation are carried out at a temperature of around 30° C and relative humidity of 60%. If the temperature is not at the recommended level, the following problems might occur: - Surface treatment level reduction which, at a later stage, might hinder printing and/or lamination; - Film transparency reduction; - Excessive CoF reduction, which might hinder processing and machinability. It is recommended that BOPP films are kept at operating room temperature for 24 hours before use.


W W W. P O LO F I L M S .CO M . B R

@polofilms