Page 1

CATALOGUE OF APPLICATIONS

ADHESIVE TAPES 07/2020 | Rev. 01

@poloямБlms


CATA LO G U E O F A D H E S IVE TA PE S


TFA Transparent BOPP Film. Non heat-sealable. High-intensity surface treatment.

MAIN CHARACTERISTICS Transparent Non-Sealable Film Blaze surface treatment on one surface; Excellent optical properties (gloss and transparency); Low stretch property providing high stiffness; Excellent performance and yield in coating machines with good flatness and low residual shrinkage properties.

MOST COMMON APPLICATIONS Indicated for adhesive tapes.

STORAGE CONDITIONS All products are stored in dry, protected and clean environments, and are shipped under the same conditions in any mean of transportation. It is recommended that storage and transportation are carried out at a temperature of around 30° C and relative humidity of 60%. If the temperature is not at the recommended level, the following problems might occur: - Surface treatment level reduction which, at a later stage, might hinder printing and/or lamination; - Film transparency reduction; - Excessive CoF reduction, which might hinder processing and machinability. It is recommended that BOPP films are kept at operating room temperature for 24 hours before use.


W W W. P O LO F I L M S .CO M . B R

@poloямБlms

Profile for Polo Films

Catálogo Aplicações_Fitas Adesivas_INGLÊS  

Catálogo Aplicações_Fitas Adesivas_INGLÊS  

Profile for polofilms

Recommendations could not be loaded

Recommendations could not be loaded

Recommendations could not be loaded

Recommendations could not be loaded