Catálogo Aplicações_Embalagens Flexíveis_INGLÊS

Page 1

CATALOGUE OF APPLICATIONS

FLEXIBLE PACKAGING 07/2020 | Rev. 01

@polofilms


CATA LO G U E O F A PPL I CAT I O N S

TSY TSY.3RS TSY.CMS TSY.HTS TSY.IJM TSY.L82 TSY.L82.BIO TSY.PAS TSY.UHS TSY.WPG TPY TPY.RL TMS TMS.HTS TMS.L82 TMT TBP.HGS TBP.CSL TMA TMA.PLN

Polo Seal Polo Seal Polo Seal Polo Seal Polo Seal Polo Seal Polo Seal Polo Seal Polo Seal Polo Seal Polo Plain Polo Plain Polo Metal Polo Metal Polo Metal Polo Metal Polo Opaque Polo Opaque Polo Matte Polo Matte

Transparent Transparent Transparent Transparent Transparent Transparent Transparent Transparent Transparent Transparent Transparent Transparent Metallized Metallized Metallized Metallized Opaque White Opaque White Matte Matte

Sealable Industrial recycling resin Controlled and stable CoF at high temperatures Stable CoF at high temperatures Surface treatment for printing and/or lamination Heat-sealable at low temperatures

TSY.CF TBP.GFT

Polo Seal Polo Opaque

Transparent Opaque White

Super Gloss Gifts

Surface treatment for printing and/or lamination Biodegradable

Surface treatment for printing and/or lamination

High slip and stable CoF at high temperatures Printed Clusters Non-Sealable Release Property Medium Barrier Medium Barrier and stable CoF at high temperatures Medium Barrier and Heat-sealable at low temperatures Medium water vapor barrier Sealable Cold Seal Sealable Non-Sealable



CATA LO G U E O F A PPL I CAT I O N S

TSY Transparent BOPP Film Heat-sealable Surface treatment for printing and/or lamination

MAIN CHARACTERISTICS Heat-sealable on both surfaces, starting from 105° C on the untreated surface; Internal and external surface treatment; Excellent optical properties (gloss and transparency); Optimal performance in horizontal and vertical filling machines.

MOST COMMON APPLICATIONS Flexible packaging for foods: biscuits, snacks, chocolates, cereal bars, and packaging for printed clusters; Flexible packaging for non-foods: monolayer or laminated options; Continuous labels (WAL Roll Fed), monolayer or laminated options; Designed for HFFS - Horizontal Form Fill Seal and VFFS filling processes - Vertical Form Fill Seal.

STORAGE CONDITIONS All products are stored in dry, protected and clean environments, and are shipped under the same conditions in any mean of transportation. It is recommended that storage and transportation are carried out at a temperature of around 30° C and relative humidity of 60%. If the temperature is not at the recommended level, the following problems might occur: - Surface treatment level reduction which, at a later stage, might hinder printing and/or lamination; - Film transparency reduction; - Excessive CoF reduction, which might hinder processing and machinability. It is recommended that BOPP films are kept at operating room temperature for 24 hours before use.


TSY.3RS Transparent BOPP Film. Heat-sealable. Surface treatment for printing and/or lamination. Made of industrial recycling resin (Food Grade).

MAIN CHARACTERISTICS Heat-sealable on both surfaces, starting from 105° C on the untreated surface; Internal and external surface treatment; Good optical properties (gloss and transparency); Optimal performance in vertical and horizontal filling machines.

MOST COMMON APPLICATIONS Flexible packaging for foods: biscuits, snacks, chocolates, cereal bars, and packaging for printed clusters; Flexible packaging for non-foods: monolayer or laminated options; Continuous labels (WAL Roll Fed), laminated or monolayer options; Designed for HFFS - Horizontal Form Fill Seal and VFFS - Vertical Form Fill Seal filling processes. STORAGE CONDITIONS

STORAGE CONDITIONS All products are stored in dry, protected and clean environments, and are shipped under the same conditions in any mean of transportation. It is recommended that storage and transportation are carried out at a temperature of around 30° C and relative humidity of 60%. If the temperature is not at the recommended level, the following problems might occur: - Surface treatment level reduction which, at a later stage, might hinder printing and/or lamination; - Film transparency reduction; - Excessive CoF reduction, which might hinder processing and machinability. It is recommended that BOPP films are kept at operating room temperature for 24 hours before use.


CATA LO G U E O F A PPL I CAT I O N S

TSY.CMS Transparent BOPP Film Heat-sealable Surface treatment for printing and/or lamination Controlled and stable CoF at high temperatures

MAIN CHARACTERISTICS Heat-sealable on both surfaces, starting from 105° C on the untreated surface; Internal and external surface treatment; Excellent optical properties (gloss and transparency); CoF with controlled and stable slip properties at high temperatures (Stable Hot Slip); Excellent KI performance in portfolio type filling machines.

MOST COMMON APPLICATIONS Flexible packaging for foods: biscuits, snacks, instant noodles and cluster packaging; Flexible packaging for non-foods: monolayer or laminated options; Designed for HFFS - Horizontal Form Fill Seal and VFFS - Vertical Form Fill Seal filling processes.

STORAGE CONDITIONS All products are stored in dry, protected and clean environments, and are shipped under the same conditions in any mean of transportation. It is recommended that storage and transportation are carried out at a temperature of around 30° C and relative humidity of 60%. If the temperature is not at the recommended level, the following problems might occur: - Surface treatment level reduction which, at a later stage, might hinder printing and/or lamination; - Film transparency reduction; - Excessive CoF reduction, which might hinder processing and machinability. It is recommended that BOPP films are kept at operating room temperature for 24 hours before use.


TSY.HTS Transparent BOPP Film Heat-sealable Surface treatment for printing and/or lamination Stable CoF at high temperatures

MAIN CHARACTERISTICS Heat-sealable on both surfaces, starting from 105° C on the untreated surface; Corona surface treatment on one side; Excellent optical properties (gloss and transparency); Stable CoF at high temperatures (Stable Hot Slip); Excellent performance in high-speed filling machines.

MOST COMMON APPLICATIONS Flexible packaging for foods: biscuits, snacks, chocolates, cereal bars and ice creams; Flexible packaging for non-foods: monolayer or laminated options; Designed for HFFS - Horizontal Form Fill Seal and VFFS - Vertical Form Fill Seal filling processes or high-speed packing.

STORAGE CONDITIONS All products are stored in dry, protected and clean environments, and are shipped under the same conditions in any mean of transportation. It is recommended that storage and transportation are carried out at a temperature of around 30° C and relative humidity of 60%. If the temperature is not at the recommended level, the following problems might occur: - Surface treatment level reduction which, at a later stage, might hinder printing and/or lamination; - Film transparency reduction; - Excessive CoF reduction, which might hinder processing and machinability It is recommended that BOPP films are kept at operating room temperature for 24 hours before use.


CATA LO G U E O F A PPL I CAT I O N S

TSY.IJM Transparent BOPP film Heat - sealable Surface treatment for printing and/or lamination Appropriate for Ink Jet Mark printing

MAIN CHARACTERISTICS Both sides heat-sealable, non-treated side from 105°C; Surface treatment on inner or outer layer; Untreated face appropriate for Ink Jet Mark printing; Optimum optical properties (gloss and transparency); Optimum performance in horizontal and vertical form-fill-seal packing machines.

MOST COMMON APPLICATIONS Flexible packaging for food: pastas, cookies, snacks, chocolate bars, cereal bars and packaging for printed grouping; Non-food flexible packaging: monolayers or laminate; Continuous labels (WAL Roll Fed), monolayers or laminate; Developed for HFFS - Horizontal Form Fill Seal and VFFS - Vertical Form Fill Seal filling processes.

STORAGE CONDITIONS All products are stored in dry, protected and clean environments, and are shipped under the same conditions in any mean of transportation. It is recommended that storage and transportation are carried out at a temperature of around 30° C and relative humidity of 60%. If the temperature is not at the recommended level, the following problems might occur: - Surface treatment level reduction which, at a later stage, might hinder printing and/or lamination; - Film transparency reduction; - Excessive CoF reduction, which might hinder processing and machinability. It is recommended that BOPP films are kept at operating room temperature for 24 hours before use.


TSY.L82 Transparent BOPP Film Heat-sealable at low temperatures Surface treatment for printing and/or lamination

MAIN CHARACTERISTICS Heat-sealable on both surfaces, starting from 82° C on the untreated surface; Internal and external surface treatment; Excellent optical properties (gloss and transparency); Excellent performance in horizontal and vertical filling machines; Optimal hermetic sealing.

MOST COMMON APPLICATIONS Flexible packaging for foods: biscuits, wafers, and cluster packaging; Flexible packaging for non-foods: A4 paper reams; Provides higher productivity in filling or packing processes due to a shorter sealing time; Designed for HFFS - Horizontal Form Fill Seal and VFFS - Vertical Form Fill Seal filling processes.

STORAGE CONDITIONS All products are stored in dry, protected and clean environments, and are shipped under the same conditions in any mean of transportation. It is recommended that storage and transportation are carried out at a temperature of around 30° C and relative humidity of 60%. If the temperature is not at the recommended level, the following problems might occur: - Surface treatment level reduction which, at a later stage, might hinder printing and/or lamination; - Film transparency reduction; - Excessive CoF reduction, which might hinder processing and machinability. It is recommended that BOPP films are kept at operating room temperature for 24 hours before use.


CATA LO G U E O F A PPL I CAT I O N S

TSY.L82.BIO Transparent BOPP film Heat-sealable at low initial temperature Surface treatment for printing and/or lamination Biodegradable

MAIN CHARACTERISTICS Both sides heat-sealable, non-treated side from 82°C; Surface treatment on inner or outer layer; Excellent optical properties (gloss and transparency); Excellent performance in horizontal form-fill-seal and wrap-around packing machines; BOPP specially designed to biodegrade in environments anaerobic.

MOST COMMON APPLICATIONS Flexible packaging for food: cookies, wafer grouping packaging; Non-food flexible packaging: A4 sheet reams; Provides increased productivity for filling or packing processes owing to decreased sealing time; Developed for HFFS - Horizontal Form Fill Seal and VFFS - Vertical Form Fill Seal filling or high-speed packing processes.

STORAGE CONDITIONS All products are stored in dry, protected and clean environments, and are shipped under the same conditions in any mean of transportation. It is recommended that storage and transportation are carried out at a temperature of around 30° C and relative humidity of 60%. If the temperature is not at the recommended level, the following problems might occur: - Surface treatment level reduction which, at a later stage, might hinder printing and/or lamination; - Film transparency reduction; - Excessive CoF reduction, which might hinder processing and machinability It is recommended that BOPP films are kept at operating room temperature for 24 hours before use.


TSY.PAS Transparent BOPP film Heat - sealable Surface treatment for printing and/or lamination Suitable for pasta packaging

MAIN CHARACTERISTICS Both sides heat-sealable, non treated side from 105°C Surface treatment on inner or outer layer; Optimum optical properties (gloss and transparency); Stable CoF at higher temperature than room temperature (Stable Hot Slip).

MOST COMMON APPLICATIONS Flexible packaging for food: pastas, cookies, snacks, chocolate bars and cereal bars; Non-food flexible packaging: monolayers or laminate, labels and decorative applications in general.

STORAGE CONDITIONS All products are stored in dry, protected and clean environments, and are shipped under the same conditions in any mean of transportation. It is recommended that storage and transportation are carried out at a temperature of around 30° C and relative humidity of 60%. If the temperature is not at the recommended level, the following problems might occur: - Surface treatment level reduction which, at a later stage, might hinder printing and/or lamination; - Film transparency reduction; - Excessive CoF reduction, which might hinder processing and machinability. It is recommended that BOPP films are kept at operating room temperature for 24 hours before use.


CATA LO G U E O F A PPL I CAT I O N S

TSY.UHS Transparent BOPP Film Heat-sealable Surface treatment for printing and/or lamination High slip and stable CoF at high temperatures

MAIN CHARACTERISTICS Heat-sealable on both surfaces, starting from 105° C on the untreated surface; Internal and external surface treatment; Excellent optical properties (gloss and transparency); High Slip and stable CoF at high temperatures (Stable Hot Slip); Excellent performance in high-speed filling machines.

MOST COMMON APPLICATIONS Flexible packaging for foods: biscuits, snacks, chocolates, cereal bars and ice creams; Flexible packaging for non-foods: monolayer or laminated options; Designed for HFFS - Horizontal Form Fill Seal and VFFS - Vertical Form Fill Seal filling processes or high-speed packing.

STORAGE CONDITIONS All products are stored in dry, protected and clean environments, and are shipped under the same conditions in any mean of transportation. It is recommended that storage and transportation are carried out at a temperature of around 30° C and relative humidity of 60%. If the temperature is not at the recommended level, the following problems might occur: - Surface treatment level reduction which, at a later stage, might hinder printing and/or lamination; - Film transparency reduction; - Excessive CoF reduction, which might hinder processing and machinability It is recommended that BOPP films are kept at operating room temperature for 24 hours before use.


TSY.WPG Transparent BOPP Film Heat-sealable Surface treatment for printing and/or lamination High slip and stable CoF at high temperatures

MAIN CHARACTERISTICS Heat-sealable on both surfaces, starting from 105° C on the untreated surface; Internal and external surface treatment; Excellent optical properties (gloss and transparency); High Slip and stable CoF at high temperatures (Stable Hot Slip); Excellent performance in high-speed filling machines.

MOST COMMON APPLICATIONS Flexible packaging for foods: biscuits, snacks, chocolates, cereal bars and ice creams; Flexible packaging for non-foods: monolayer or laminated options; Designed for HFFS - Horizontal Form Fill Seal and VFFS - Vertical Form Fill Seal filling processes or high-speed packing.

STORAGE CONDITIONS All products are stored in dry, protected and clean environments, and are shipped under the same conditions in any mean of transportation. It is recommended that storage and transportation are carried out at a temperature of around 30° C and relative humidity of 60%. If the temperature is not at the recommended level, the following problems might occur: - Surface treatment level reduction which, at a later stage, might hinder printing and/or lamination; - Film transparency reduction; - Excessive CoF reduction, which might hinder processing and machinability It is recommended that BOPP films are kept at operating room temperature for 24 hours before use.


CATA LO G U E O F A PPL I CAT I O N S

TPY Transparent BOPP Film. Non heat-sealable. Surface treatment for printing and/or lamination.

MAIN CHARACTERISTICS Non heat-sealable film; Internal and/or external surface treatment; Excellent optical properties (gloss and transparency); Optimal performance in horizontal or vertical filling machines; Medium thermal resistance.

MOST COMMON APPLICATIONS Flexible packaging for foods: doughs, coffees, chocolate products, dried soups, nutritional powders; Flexible packaging for non-foods: pet food; paperboard lamination and graphics applications in general; Continuous labels (WAL Roll Fed), laminated or monolayer options, and Magazine Labels (WAL Cut & Stack); Designed for HFFS - Horizontal Form Fill Seal and VFFS - Vertical Form Fill Seal filling processes.

STORAGE CONDITIONS All products are stored in dry, protected and clean environments, and are shipped under the same conditions in any mean of transportation. It is recommended that storage and transportation are carried out at a temperature of around 30° C and relative humidity of 60%. If the temperature is not at the recommended level, the following problems might occur: - Surface treatment level reduction which, at a later stage, might hinder printing and/or lamination; - Film transparency reduction; - Excessive CoF reduction, which might hinder processing and machinability. It is recommended that BOPP films are kept at operating room temperature for 24 hours before use.


TPY.RL Transparent BOPP Film Non heat-sealable Surface treatment for lamination Non-Stick - Release property

MAIN CHARACTERISTICS Non heat-sealable film; Internal and external surface treatment; Excellent optical properties (gloss and transparency); Untreated surface with Non-Stick - Release property; Excellent performance in Cold Seal processes.

MOST COMMON APPLICATIONS Flexible packaging for foods: ice creams, chocolates, cereal bars, and candies; Designed for non-heated filling and sealing processes.

STORAGE CONDITIONS It is recommended not to store this material at temperatures above 30° C, with relative humidity of 60%, protected against direct sunlight, rainfall and dust. Its physical properties might deteriorate if it is stored under adverse conditions other than as established above, and so an adequate inventory rotation for this material is recommended. All products are stored in dry, protected and clean environments, and are shipped under the same conditions in any mean of transportation. It is recommended that storage and transportation are carried out at a temperature of around 30° C and relative humidity of 60%. If the temperature is not at the recommended level, the following problems might occur: - Surface treatment level reduction which, at a later stage, might hinder printing and/or lamination; - Film transparency reduction; - Excessive CoF reduction, which might hinder processing and machinability It is recommended that BOPP films are kept at operating room temperature for 24 hours before use.


CATA LO G U E O F A PPL I CAT I O N S

TMS Metallized BOPP Film Heat-sealable Medium Barrier

MAIN CHARACTERISTICS Heat-sealable starting from 105° C on the non-metallized surface; Medium barrier to water vapor; Excellent barrier to light; Optimal performance in horizontal and vertical packing machines.

MOST COMMON APPLICATIONS Flexible packaging for foods: biscuits, snacks, chocolates, ice creams, cereal bars; Flexible packaging for non-foods: decorative applications in general; Continuous labels (WAL Roll Fed), laminated or monolayer options; Designed for HFFS - Horizontal Form Fill Seal and VFFS - Vertical Form Fill Seal filling processes.

STORAGE CONDITIONS All products are stored in dry, protected and clean environments, and are shipped under the same conditions in any mean of transportation. It is recommended that storage and transportation are carried out at a temperature of around 30° C and relative humidity of 60%. If the temperature is not at the recommended level, the following problems might occur: - Surface treatment level reduction which, at a later stage, might hinder printing and/or lamination; - Film transparency reduction; - Excessive CoF reduction, which might hinder processing and machinability. It is recommended that BOPP films are kept at operating room temperature for 24 hours before use.


TMS.HTS Metallized BOPP Film Heat-sealable Medium Barrier Stable CoF at high temperatures

MAIN CHARACTERISTICS Heat-sealable starting from 105° C on the non-metallized surface; Medium barrier to water vapor; Excellent barrier to light; Stable CoF at high temperatures (Stable Hot Slip); Optimal performance in horizontal and vertical packing machines.

MOST COMMON APPLICATIONS Flexible packaging for foods: biscuits, snacks, chocolates, ice creams, cereal bars; Flexible packaging for non-foods: decorative applications in general; Designed for HFFS - Horizontal Form Fill Seal and VFFS - Vertical Form Fill Seal filling processes.

STORAGE CONDITIONS All products are stored in dry, protected and clean environments, and are shipped under the same conditions in any mean of transportation. It is recommended that storage and transportation are carried out at a temperature of around 30° C and relative humidity of 60%. If the temperature is not at the recommended level, the following problems might occur: - Surface treatment level reduction which, at a later stage, might hinder printing and/or lamination; - Film transparency reduction; - Excessive CoF reduction, which might hinder processing and machinability. It is recommended that BOPP films are kept at operating room temperature for 24 hours before use.


CATA LO G U E O F A PPL I CAT I O N S

TMS.L82 Metallized BOPP Film Heat-sealable at low temperatures Medium Barrier

MAIN CHARACTERISTICS Heat-sealable starting from 82° C on the non-metallized surface; Medium barrier to water vapor; Excellent barrier to light; Optimal hermetic sealing; Excellent performance in high-speed filling machines.

MOST COMMON APPLICATIONS Flexible packaging for foods: biscuits, snacks, chocolates, ice creams, cereal bars; Flexible packaging for non-foods: decorative applications in general; Designed for HFFS - Horizontal Form Fill Seal and VFFS - Vertical Form Fill Seal filling processes.

STORAGE CONDITIONS

All products are stored in dry, protected and clean environments, and are shipped under the same conditions in any mean of transportation. It is recommended that storage and transportation are car out at a temperature of around 30° C and relative humidity of 60%. If the temperature is not at the recommended level, the following problems might occur: - Surface treatment level reduction which, at a later stage, might hinder printing and/or lamination; - Film transparency reduction; - Excessive CoF reduction, which might hinder processing and machinability. It is recommended that BOPP films are kept at operating room temperature for 24 hours before use.


ied

TMT Metallized BOPP film Heat-sealable Medium water vapor barrier Surface treatment for printing and/or lamination

MAIN CHARACTERISTICS Heat-sealable on non-metallized side from 112°C; Surface treatment on inner and outer layer; Medium water vapor barrier; Stable CoF at higher temperature than room temperature (Stable Hot Slip); Optimum performance in high-speed filling machines.

MOST COMMON APPLICATIONS Flexible packaging for food: chocolate bars, cereal bars, bonbon boxes, cookies and Cold Seal structures; Non-food flexible packaging: decorative applications in general.

STORAGE CONDITIONS All products are stored in dry, protected and clean environments, and are shipped under the same conditions in any mean of transportation. It is recommended that storage and transportation are carried out at a temperature of around 30° C and relative humidity of 60%. If the temperature is not at the recommended level, the following problems might occur: - Surface treatment level reduction which, at a later stage, might hinder printing and/or lamination; - Film transparency reduction; - Excessive CoF reduction, which might hinder processing and machinability. It is recommended that BOPP films are kept at operating room temperature for 24 hours before use.


CATA LO G U E O F A PPL I CAT I O N S

TBP.HGS Opaque White BOPP Film. Heat-sealable. Surface treatment for printing and/or lamination.

MAIN CHARACTERISTICS Heat-sealable on both surfaces, starting from 105° C on the untreated surface; Internal and/or external surface treatment; High gloss on both surfaces; Cavitated film with high opacity; Optimal performance in vertical and horizontal packing machines.

MOST COMMON APPLICATIONS Flexible packaging for foods: sweets, chocolates, ice creams; Flexible packaging for non-foods: packaging for gifts and general applications; Designed for HFFS - Horizontal Form Fill Seal and VFFS - Vertical Form Fill Seal filling processes; Decorative applications in general.

STORAGE CONDITIONS All products are stored in dry, protected and clean environments, and are shipped under the same conditions in any mean of transportation. It is recommended that storage and transportation are carried out at a temperature of around 30° C and relative humidity of 60%. If the temperature is not at the recommended level, the following problems might occur: - Surface treatment level reduction which, at a later stage, might hinder printing and/or lamination; - Film transparency reduction; - Excessive CoF reduction, which might hinder processing and machinability. It is recommended that BOPP films are kept at operating room temperature for 24 hours before use.


TBP.CSL Opaque White BOPP Film Surface treatment for printing and/or lamination Cold Seal Application

MAIN CHARACTERISTICS Heat-sealable on both surfaces, starting from 105° C on the untreated surface; Internal and external surface treatment; Both surfaces are glossy; Cavitated film with high opacity; Optimal performance in flexographic printers and rotogravure printing, opposite surface suitable for stickering and Cold Seal applications.

MOST COMMON APPLICATIONS Flexible packaging for foods: chocolates, candies and biscuits; Flow Pack packaging for individual portions.

STORAGE CONDITIONS All products are stored in dry, protected and clean environments, and are shipped under the same conditions in any mean of transportation. It is recommended that storage and transportation are carried out at a temperature of around 30° C and relative humidity of 60%. If the temperature is not at the recommended level, the following problems might occur: - Surface treatment level reduction which, at a later stage, might hinder printing and/or lamination; - Film transparency reduction; - Excessive CoF reduction, which might hinder processing and machinability. It is recommended that BOPP films are kept at operating room temperature for 24 hours before use.


CATA LO G U E O F A PPL I CAT I O N S

TMA Matte BOPP Film Heat-sealable Surface treatment for printing and/or lamination

MAIN CHARACTERISTICS Heat-sealable on one or both surfaces; Internal and external surface treatment; Matte surface providing satin effect and soft touch; Excellent performance in horizontal and vertical filling machines.

MOST COMMON APPLICATIONS Flexible packaging for foods: biscuits, snacks, chocolates, cereal bars and doughs; Flexible packaging for non-foods: pet food; paperboard lamination and graphics applications in general; Designed for HFFS - Horizontal Form Fill Seal and VFFS - Vertical Form Fill Seal filling processes.

STORAGE CONDITIONS All products are stored in dry, protected and clean environments, and are shipped under the same conditions in any mean of transportation. It is recommended that storage and transportation are carried out at a temperature of around 30° C and relative humidity of 60%. If the temperature is not at the recommended level, the following problems might occur: - Surface treatment level reduction which, at a later stage, might hinder printing and/or lamination; - Film transparency reduction; - Excessive CoF reduction, which might hinder processing and machinability. It is recommended that BOPP films are kept at operating room temperature for 24 hours before use.


TMA.PLN Matte BOPP Film Non heat-sealable Surface treatment for printing and/or lamination

MAIN CHARACTERISTICS Non heat-sealable film; Internal and external surface treatment; Matte surface providing satin effect and soft touch; Excellent performance in horizontal and vertical filling machines.

MOST COMMON APPLICATIONS Flexible packaging for foods: biscuits, snacks, chocolates, cereal bars and doughs; Flexible packaging for non-foods: soaps, pet food, paperboard lamination and graphics applications in general; Designed for HFFS - Horizontal Form Fill Seal and VFFS - Vertical Form Fill Seal filling processes.

STORAGE CONDITIONS All products are stored in dry, protected and clean environments, and are shipped under the same conditions in any mean of transportation. It is recommended that storage and transportation are carried out at a temperature of around 30° C and relative humidity of 60%. If the temperature is not at the recommended level, the following problems might occur: - Surface treatment level reduction which, at a later stage, might hinder printing and/or lamination; - Film transparency reduction; - Excessive CoF reduction, which might hinder processing and machinability. It is recommended that BOPP films are kept at operating room temperature for 24 hours before use.


CATA LO G U E O F A PPL I CAT I O N S

TSY.CF Transparent BOPP Film. Heat-sealable. High-intensity surface treatment for printing or lamination.

MAIN CHARACTERISTICS Heat-sealable starting from 115° C on the untreated surface; Internal and external surface treatment; Excellent optical properties (gloss and transparency).

MOST COMMON APPLICATIONS Flexible packaging for non-foods: wrappers and commemorative baskets for gifts, and decorative applications in general.

STORAGE CONDITIONS All products are stored in dry, protected and clean environments, and are shipped under the same conditions in any mean of transportation. It is recommended that storage and transportation are carried out at a temperature of around 30° C and relative humidity of 60%. If the temperature is not at the recommended level, the following problems might occur: - Surface treatment level reduction which, at a later stage, might hinder printing and/or lamination; - Film transparency reduction; - Excessive CoF reduction, which might hinder processing and machinability. It is recommended that BOPP films are kept at operating room temperature for 24 hours before use.


TBP.GFT Opaque White BOPP Film Heat-sealable Surface treatment for printing

MAIN CHARACTERISTICS Heat-sealable on both surfaces, starting from 105° C on the untreated surface; Internal and external surface treatment; High gloss and brightness on both surfaces; Cavitated film with high opacity; Optimal performance in flexographic printers and rotogravure printing.

MOST COMMON APPLICATIONS Flexible packaging for non-foods: bags for gifts and decorative applications in general.

STORAGE CONDITIONS All products are stored in dry, protected and clean environments, and are shipped under the same conditions in any mean of transportation. It is recommended that storage and transportation are carried out at a temperature of around 30° C and relative humidity of 60%. If the temperature is not at the recommended level, the following problems might occur: - Surface treatment level reduction which, at a later stage, might hinder printing and/or lamination; - Film transparency reduction; - Excessive CoF reduction, which might hinder processing and machinability. It is recommended that BOPP films are kept at operating room temperature for 24 hours before use.


W W W. P O LO F I L M S .CO M . B R

@polofilms


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.