PRODUCTS CATALOGUE
M A D E I N I TA LY
Pneumatic applicators
RC/NE
Pneumatic Applicators
Pneumatic applicator for the extrusion of sealant products and adhesives, packaged in standard plastic cartridges. For the use of aluminum cartridges it is advisable to use the applicator CSG / 450, see page 5.
MICRO PRESSURE REGULATOR OPTIONAL (see item 4 on page 3)
WAY OF EXTRUSION
PNEUMATIC
Weight Pressure Length tube Max. Force Connection Noise level
350 g. 4-8 bar 210 mm 160 Kgf (8 bar - 116 PSI)- 1.569 kN 1/4 maschio gas <80 dBA
Single standar packaging: NEUTRAL PACKAGING (see pag. 18 num. 3.) Multiple packing:
56x58x35 cm
20 pz
7 Kg
L Type
Volume
D(mm)
L(mm)
CARTRIDGE
300 ml
50-51
215
CARTRIDGE
310 ml
50-51
218
D
CARTRIDGE
CSG II 210 Pneumatic applicator for the extrusion of sealeants and adhesives, packaged in standard plastic or aluminium* cartridges. *For the use of aluminum cartridges it is advisable to use the applicator CSG II 450, see page 5. WAY OF EXTRUSION
PNEUMATIC
Net weight Pressure Length tube Max. Force Connection Noise level Features
867 g. 4-8 bar 220 mm 160 Kgf (8 bar - 116 PSI)- 1.569 kN 1/4 male gas<80 dBA • Pressure reducer integrated • Dump valve integrated (dripless)
Single standar packaging: NEUTRAL PACKAGING (see pag. 18 num. 3.) and PACKAGING WITH CUSTOMIZED P.M.T. LAYOUT (see pag. 18 num. 5.) Multiple packing:
L Type
2
Volume
D(mm)
L(mm)
CARTRIDGE
300 ml
50-51
215
CARTRIDGE
310 ml
50-51
218
D
CARTRIDGE
55x32x44 cm.
10 pz
11,80 Kg
CSG II 245
• MECHANICAL (by means of a piston) for soft-pack • PNEUMATIC for cartridge
Net weight Pressure Length tube Max. Force Connection Noise level Features
1.072 g. 4-8 bar 263 mm 160 Kgf (8 bar - 116 PSI)- 1.569 kN 1/4 male gas <80 dBA • Pressure reducer integrated • Dump valve integrated (dripless)
Single standar packaging: NEUTRAL PACKAGING (see pag. 18 num. 3.) and PACKAGING WITH CUSTOMIZED P.M.T. LAYOUT (see pag. 18 num. 5.) Multiple packing: Type
D(mm)
L(mm)
CARTRIDGE
Volume
300 ml
50-51
215
CARTRIDGE
310 ml
50-51
218
SOFT-PACK
300 ml
50-51
180
SOFT-PACK
400 ml
50-51
230
10 pz
16,40Kg
L
L D
42x49x45 cm
SOFT-PACK
D
CARTRIDGE
Pneumatic Applicators
WAY OF EXTRUSION
M A D E I N I TA LY
Pneumatic applicator for the extrusion of sealers and adhesives, packaged in standard plastic or aluminium* cartridges, or soft-packs. *For the use of aluminum cartridges it is advisable to use the applicator CSG / 450, see page 5.
CSG II 270 Pneumatic applicator for the extrusion of sealers and adhesives, packaged in standard soft-packs. WAY OF EXTRUSION
MECHANICAL (by means of a piston)
Net Weight Pressure Length tube Max. Force Connection Noise level Features
1.072 g. 4-8 bar 263 mm 160 Kgf (8 bar - 116 PSI)- 1.569 kN 1/4 male gas <80 dBA • Pressure reducer integrated • Dump valve integrated (dripless)
Single standar packaging: NEUTRAL PACKAGING (see pag. 18 num. 3.) and PACKAGING WITH CUSTOMIZED P.M.T. LAYOUT (see pag. 18 num. 5.) Multiple packing:
Type
Volume
D(mm)
L(mm)
SOFT-PACK
300 ml
50-51
180
SOFT-PACK
400 ml
50-51
230
50x42x61 cm
10 pz
15,20 Kg
L D
SOFT-PACK
3
NEW MODEL
CSG II 340 T Pneumatic applicator for the extrusion of sealeants and adhesives, packaged in standard plastic or aluminuim cartridge and bags with telescopic piston.
Pneumatic Applicators
WAY OF EXTRUSION
Net weight Pressure Length tube Max. Force Connection Noise level Features
Telescopic piston
Volume
D(mm)
L(mm)
300 ml
50-51
215
CARTRIDGE
310 ml
50-51
218
CARTRIDGE
300 ml
50-51
180
SOFT-PACK
400 ml
50-51
230
Type
1.400 g. 4-8 bar 340 mm 70 Kgf (8 bar - 116 PSI)- 0,7 kN 1/4 male gas<80 dBA • Pressure reducer integrated • Dump valve integrated
Single standar packaging: NEUTRAL PACKAGING (see pag. 18 num. 3.) and PACKAGING WITH CUSTOMIZED P.M.T. LAYOUT (see pag. 18 num. 5.) Multiple packing:
CARTRIDGE
MECHANICAL ( by means of a telescopic piston)
59x36x64 cm.
20,80 Kg
L
L D
10 pz
D
CARTRIDGE
SOFT-PACK
CSG II 370 Pneumatic applicator for the extrusion of sealers and adhesives, packaged in standard plastic or aluminium* cartridges, or soft-packs. *For the use of aluminum cartridges it is advisable to use the applicator CSG II 450, see page 5. WAY OF EXTRUSION
• MECHANICAL (by means of a piston) for soft-pack • PNEUMATIC for cartridge
Net weight Pressure Length tube Max. Force Connection Noise level Features
1.252 g. 4-8 bar 370 mm 160 Kgf (8 bar - 116 PSI)- 1.569 kN 1/4 male gas <80 dBA • Pressure reducer integrated • Dump valve integrated (dripless)
Single standar packaging: NEUTRAL PACKAGING (see pag. 18 num. 3.) and PACKAGING WITH CUSTOMIZED P.M.T. LAYOUT (see pag. 18 num. 5.) D(mm)
L(mm)
CARTRIDGE
300 ml
50-51
215
Type
4
Volume
CARTRIDGE
310 ml
50-51
218
CARTRIDGE
300 ml
50-51
180
SOFT-PACK
400 ml
50-51
230
SOFT-PACK
600 ml
50-51
335
Multiple packing
L
L D
CARTRIDGE
59x36x64 cm
D
SOFT-PACK
10 pz
18,70 Kg
M A D E I N I TA LY
CSG II 400
Volume
D(mm)
L(mm)
SOFT-PACK
300 ml
50-51
180
SOFT-PACK
400 ml
50-51
230
SOFT-PACK
600 ml
50-51
335
Type
WAY OF EXTRUSION
MECHANICAL (by means of a piston)
Net weight Pressure Length tube Max. Force Connection Noise level Features
1.119 g. 4-8 bar 400 mm 160 Kgf (8 bar - 116 PSI)- 1.569 kN 1/4 male gas <80 dBA • Pressure reducer integrated • Dump valve integrated (dripless)
Single standar packaging: NEUTRAL PACKAGING (see pag. 18 num. 3.) and PACKAGING WITH CUSTOMIZED P.M.T. LAYOUT (see pag. 18 num. 5.) Multiple packing:
61x49x44 cm
10 pz
17,30 Kg
Pneumatic Applicators
Pneumatic applicator for the extrusion of sealers and adhesives, packaged in standard soft-packs.
CSG II 450 Pneumatic applicator for the extrusion of sealers and adhesives, packaged in standard cartridges (especially suitable for aluminum cartridges) or soft-packs. Thanks to the mechanical piston the product is not in contact with air under pressure. WAY OF EXTRUSION
Metal piston
Net weight 1.416 g. Pressure 4-8 bar Length tube 512 mm Max. Force 160 Kgf (8 bar - 116 PSI)- 1.569 kN Connection 1/4 male gas Noise level <80 dBA Features • Pressure reducer integrated • Dump valve integrated (dripless) Single standar packaging: NEUTRAL PACKAGING (see pag. 18 num. 3.) and PACKAGING WITH CUSTOMIZED P.M.T. LAYOUT (see pag. 18 num. 5.) Multiple packing:
Type
D(mm)
L(mm)
CARTRIDGE
Volume
300 ml
50-51
215
CARTRIDGE
310 ml
50-51
218
SOFT-PACK
300 ml
50-51
180
SOFT-PACK
400 ml
50-51
230
L D
CARTRIDGE
MECHANICAL (rod driven piston)
42x49x61 cm
10pz
19kg
L D
SOFT-PACK
5
Pneumatic Applicators
CSG II 1100 Pneumatic applicator for the extrusion of sealers and adhesives, packaged in standard soft-pack. WAY OF EXTRUSION
MECHANICAL (by means of a piston)
Weight Pressure Length tube Max. Force Connection Noise level Features
1.700 g. 4-8 bar 1150 mm 160 Kgf (8 bar - 116 PSI)- 1.569 kN 1/4 male gas <80 dBA • Pressure reducer integrated • Dump valve integrated (dripless)
Single standar packaging: NEUTRAL PACKAGING (see pag. 18 num. 3.)
6
Type
Volume
D (mm)
L (mm)
SOFT-PACK
1000 ml
50-51
≤1000
L D
SOFT-PACK
M A D E I N I TA LY
Pneumatic applicator for the extrusion of sealers and adhesives on civilian or industrial large surfaces like airport pavimentation or wooden floors. It extrudes the products packaged in 1800 ml soft-packs. WAY OF EXTRUSION
MECHANICAL (by means of a piston)
Weight Pressure Length tube Max. Force Connection Noise level Features
3.000 g. 4-8 bar. 1000 mm 250 kgf at 8 bar 1/4 male gas <80 dBA • Pressure reducer integrated • Dump valve integrated (dripless)
Type
Volume
D (mm)
L (mm)
SOFT-PACK
1800 ml
64-65
≤900
Pneumatic Applicators
CSG II FLOOR
L D
SOFT-PACK
SPECIAL SUPPORT SYSTEM
(not included)
Professional support system for CSG FLOOR, which is calibrated for the best comfort during the use by the operator, with our mechanical assistance system on the extrude surface. This system is designed to give the possibility to set-up and adjust the distance of the nozzle from the floor. Easy to move it thanks to the wheels, it represent the innovative way to glue any kind of floors.
7
CSG II BCX /50 Pneumatic applicator for the extrusion of all types of products, high viscosity sealing and adhesive products, packed in syde by syde cartridges 50 ml. Thanks to the mechanical piston, the product does not come into contact with the air under pressure.
Type
Volume
D(mm)
L(mm)
CARTRIDGE
50 ml 1:1
47,5-22,5
215
CARTRIDGE
50 ml 2:1
47,5-28,5
215
WAY OF EXTRUSION
MECHANICAL (rod driven piston)
Net weight Pressure Total length Max. Force Connection Noise level Features
900 g. 4-10 bar 240 mm 160 Kgf (8 bar - 116 PSI)- 1.569 kN 1/4 male gas <80 dBA • Pressure reducer integrated • Integrated air discharge valve • Pneumatic return
Single standar packaging: NEUTRAL PACKAGING (see pag. 18 num. 3.) 18
50 ml 1:1
45mm
45mm
Pneumatic Applicators
NEW MODEL
50 ml 2:1
98 mm
SIDE BY SIDE 25
98 mm
CSG II 450 MP Pneumatic applicator for the extrusion of high viscosity sealers and adhesives, packaged in standard cartridges (especially suitable for aluminum cartridges) or soft-packs. Thanks to the mechanical piston the product is not in contact with air under pressure.
NEW MODEL
Metal piston
WAY OF EXTRUSION
MECHANICAL (rod driven piston)
Net weight Pressure Front tube length Total length Max. Force Connection Noise level Features
1.982 g. 4-10 bar 240 mm 585 mm 380 Kgf (10 bar - 145 PSI) - 3,8 kN 1/4 male gas <80 dBA • Pressure reducer integrated • Integrated air discharge valve
Optional
Pneumatic return
Single standar packaging: NEUTRAL PACKAGING (see pag. 18 num. 3.) Type
8
D(mm)
L(mm)
CARTRIDGE
Volume
300 ml
50-51
215
CARTRIDGE
310 ml
50-51
218
SOFT-PACK
300 ml
50-51
180
SOFT-PACK
400 ml
50-51
230
L D
CARTRIDGE
L D
SOFT-PACK
CSG II MP BCX/400
WAY OF EXTRUSION
MECHANICAL (rod driven piston)
Pressure Total length Max. Force Connection Noise level Features
4-10 bar 520 mm 380 Kgf (10 bar - 145 PSI)- 3,8 kN 1/4 male gas <80 dBA • Pressure reducer integrated • Integrated air discharge valve • Pneumatic return
Single standar packaging: NEUTRAL PACKAGING (see pag. 18 num. 3.)
Type CARTRIDGE
Volume
D(mm)
2x200ml 1:1 2x200ml 2:1
L(mm)
185
ml.400 2:1 L
ml.400 1:1 L
SIDE BY SIDE
M A D E I N I TA LY
Pneumatic applicator for the extrusion of all types of products, high viscosity sealing and adhesive products, packed in syde by syde cartridges of 400 ml. Thanks to the mechanical piston, the product does not come into contact with the air under pressure.
Pneumatic Applicators
NEW MODEL
CSG II P BCX/400 NEW MODEL
Pneumatic applicator for the extrusion of all types of products, high viscosity sealing and adhesive products, packed in syde by syde cartridges of 400 ml. Thanks to the mechanical piston, the product does not come into contact with the air under pressure. WAY OF EXTRUSION
MECHANICAL (rod driven piston)
Pressure Total length Max. Force Connection Noise level Features
4-10 bar 520 mm 600 Kgf (10 bar - 145 PSI) - 6 kN 1/4 male gas <80 dBA • Pressure reducer integrated • Integrated air discharge valve • Pneumatic return
Single standar packaging: NEUTRAL PACKAGING (see pag. 18 num. 3.)
Type CARTRIDGE
Volume
2x200ml 1:1 2x200ml 2:1
D(mm)
L(mm)
185
ml.400 2:1 L
ml.400 1:1 L
SIDE BY SIDE
9
CSG II 600 MP
Pneumatic Applicators
NEW MODEL
Metal piston
Pneumatic applicator for the extrusion of high viscosity sealers and adhesives, packaged in standard cartridges (especially suitable for aluminum cartridges) or soft-packs. Thanks to the mechanical piston the product is not in contact with air under pressure. WAY OF EXTRUSION
MECHANICAL (rod driven piston)
Net weight Pressure Front tube length Total length Max. Force Connection Noise level Features
2.100 g. 4-10 bar 360 mm 820 mm 380 Kgf (10 bar - 145 PSI) - 3,8 kN 1/4 male gas <80 dBA • Pressure reducer integrated • Integrated air discharge valve
Optional
Pneumatic return
Single standard packaging: NEUTRAL PACKAGING (see pag. 18 num. 3.) Type
Volume
D(mm)
L(mm)
CARTRIDGE
300 ml
50-51
215
CARTRIDGE
310 ml
50-51
218
SOFT-PACK
300 ml
50-51
180
SOFT-PACK
400 ml
50-51
230
SOFT-PACK
600 ml
50-51
335
L D
CARTRIDGE
L D
SOFT-PACK
CSG II MP BCX/600 NEW MODEL
Pneumatic applicator for the extrusion of all type high viscosity and chemical anchor products, packaged in syde by syde cartridge 600 ml. Thanks to the mechanical piston the product is not in contact with air under pressure. WAY OF EXTRUSION
MECHANICAL (rod driven piston)
Weight Pressure Max. Force Connection Noise level Features
2.200 g. 4-10 bar 380 Kgf (10 bar - 145 PSI) - 3,8 kN 1/4 male gas <80 dBA • Pressure reducer integrated • Integrated air discharge valve • Pneumatic return
Single standard packaging: NEUTRAL PACKAGING (see pag. 18 num. 3.) L Type CARTRIDGE
10
Volume
2x300ml 1:1
D(mm)
L(mm)
48 - 48
216
CARTRIDGE
SIDE BY SIDE
CSG II MP BCX/345 NEW MODEL
MECHANICAL (rod driven piston)
Weight Pressure Max. Force Connection Noise level Features
2.793 g. 4-10 bar 380 Kgf (10 bar - 145 PSI) - 3,8 kN 1/4 male gas <80 dBA • Pressure reducer integrated • Integrated air discharge valve • Pneumatic return
Pneumatic Applicators
WAY OF EXTRUSION
M A D E I N I TA LY
Pneumatic applicator for the extrusion of all types of products, high viscosity sealing and adhesive products, packed in syde by syde cartridges 345 ml. Thanks to the mechanical piston, the product does not come into contact with the air under pressure.
Single standar packaging: NEUTRAL PACKAGING (see pag. 18 num. 3.)
345 ml
70 mm
218 mm
50
SIDE BY SIDE
CSG II MP BCX/585 NEW MODEL
Pneumatic applicator with cradle with side lading for the extrusion of all type high viscosity and chemical anchor products, packaged in syde by syde cartridges 385- 400- 470 and 585 ml ratio 3:1. Thanks to the mechanical single-stage the product is not in contact with air under pressure. WAY OF EXTRUSION
MECHANICAL (rod driven piston)
Weight Pressure Max. Force Connection Noise level Features
2.793 g. 4-10 bar 380 Kgf (10 bar - 145 PSI) - 3,8 kN 1/4 male gas <80 dBA • Pressure reducer integrated • Integrated air discharge valve • Pneumatic return
32
SIDE BY SIDE
Single standar packaging: NEUTRAL PACKAGING (see pag. 18 num. 3.) 54
185 mm
385 ml 3:1
89 mm
230 mm
400 ml 3:1
89 mm
230 mm
450 ml 3:1
86 mm
470 ml 3:1-2:1
89 mm
247 mm
89 mm
585 ml 3:1
160 mm
11
CSG II MP BCX/490 Pneumatic applicator for the extrusion of all type high viscosity and chemical anchor products, packaged in syde by syde cartridges 490 ml ratio 10:1. Thanks to the mechanical piston the product is not in contact with air under pressure. WAY OF EXTRUSION
MECHANICAL (rod driven piston)
Weight Pressure Max. Force Connection Noise level Features
2.350 g. 4-10 bar 380 Kgf (10 bar - 145 PSI) - 3,8 kN 1/4 male gas <80 dBA • Pressure reducer integrated • Integrated air discharge valve • Pneumatic return
Single standar packaging: NEUTRAL PACKAGING (see pag. 18 num. 3.) L Type CARTRIDGE
Volume
D(mm)
L(mm)
67-24
185
490 ml 10:1
90 mm
Pneumatic Applicators
NEW MODEL
CARTRIDGE
SIDE BY SIDE
185 mm
CSG II MP CTX/300 NEW MODEL
Pneumatic applicator for the extrusion of all type high viscosity and chemical anchor products, packaged in coaxial cartridges. Thanks to the mechanical single-stage the product is not in contact with air under pressure. WAY OF EXTRUSION
MECHANICAL (rod driven piston)
Pressure Max. Force Connection Noise level Features
4-10 bar 380 Kgf (10 bar - 145 PSI) - 3,8 kN 1/4 male gas <80 dBA • Pressure reducer integrated • Integrated air discharge valve • Pneumatic return
Single standar packaging: NEUTRAL PACKAGING (see pag. 18 num. 3.) Type
12
Volume
D(mm)
L(mm)
CARTRIDGE
150 ml 1:1or 10:1
48-50
116
CARTRIDGE
220 ml 10:1
51
163
CARTRIDGE
300 ml 10:1
48-50
193
CARTRIDGE
310 ml 10:1
50-51
215
CARTRIDGE
330 ml 10:1
50-51
240
L D
CARTRIDGE
COAXIAL
Pneumatic applicator for the extrusion of all type high viscosity and chemical anchor products, packaged in coaxial cartridges. Thanks to the mechanical single-stage the product is not in contact with air under pressure. WAY OF EXTRUSION
MECHANICAL (rod driven piston)
Pressure Max. Force Connection Noise level Features
4-10 bar 380 Kgf (10 bar - 145 PSI) - 3,8 kN 1/4 male gas <80 dBA • Pressure reducer integrated • Integrated air discharge valve • Pneumatic return
Single standar packaging: NEUTRAL PACKAGING (see pag. 18 num. 3.)
L Type CARTRIDGE
Volume
380 ml 10:1
D(mm)
L(mm)
63
185
D
CARTRIDGE
COAXIAL
Pneumatic Applicators
NEW MODEL
M A D E I N I TA LY
CSG II MP CTX/400
CSG II P BCX/345 NEW MODEL
Type
Volume
D(mm)
L(mm)
CARTRIDGE
360 ml 5:1
47,5-22,5
215
CARTRIDGE
390 ml 3:1
47,5-28,5
215
Pneumatic applicator for the extrusion of all type high viscosity and chemical anchor products, packaged in syde by syde cartridges 345 ml. Thanks to the mechanical piston the product is not in contact with air under pressure. WAY OF EXTRUSION
MECHANICAL (rod driven piston)
Pressure Max. Force Connection Noise level Features
4-10 bar 600 Kgf (10 bar - 145 PSI) - 6 kN 1/4 male gas <80 dBA • Pressure reducer integrated • Integrated air discharge valve • Pneumatic return
Single standar packaging: NEUTRAL PACKAGING (see pag. 18 num. 3.)
22,5
28,5
70 mm
77 mm
360 ml 215 mm
390 ml 47,5
215 mm
47,5
SIDE BY SIDE 13
CSG II P BCX/490 Pneumatic applicator for the extrusion of all type high viscosity and chemical anchor products, packaged in syde by syde cartridges 490 ml ratio 10:1. Thanks to the mechanical piston the product is not in contact with air under pressure. WAY OF EXTRUSION
MECHANICAL (rod driven piston)
Pressure Max. Force Connection Noise level Features
4-10 bar 600 Kgf (10 bar - 145 PSI) - 6 kN 1/4 male gas <80 dBA • Pressure reducer integrated • Integrated air discharge valve • Pneumatic return
Single standar packaging: NEUTRAL PACKAGING (see pag. 18 num. 3.)
L Type CARTRIDGE
Volume
D(mm)
490 ml 10:1
L(mm)
185
CARTRIDGE
90 mm
Pneumatic Applicators
NEW MODEL
SIDE BY SIDE
185 mm
NEW MODEL
CSG II P BCX/1500 Pneumatic applicator for the extrusion of all type high viscosity and chemical anchor products, packaged in syde by syde cartridges of 1.500 ml ratio 1:1. Thanks to the mechanical piston the product is not in contact with air under pressure. WAY OF EXTRUSION
MECHANICAL (rod driven piston)
Pressure Max. Force Connection Noise level Features
4-10 bar 600 Kgf (10 bar - 145 PSI) - 6 kN 1/4 male gas <80 dBA • Pressure reducer integrated • Integrated air discharge valve • Pneumatic return
Single standar packaging: NEUTRAL PACKAGING (see pag. 18 num. 3.) L Type CARTRIDGE
14
Volume
2x750ml 1:1
D(mm)
78
L(mm)
218
CARTRIDGE
SIDE BY SIDE
Pneumatic applicator for the extrusion of all type high viscosity and chemical anchor products, packaged in coaxial cartridges. Thanks to the mechanical piston the product is not in contact with air under pressure. WAY OF EXTRUSION
MECHANICAL (rod driven piston)
Pressure Max. Force Connection Noise level Features
4-10 bar 600 Kgf (10 bar - 145 PSI) - 6 kN 1/4 male gas <80 dBA • Pressure reducer integrated • Integrated air discharge valve • Pneumatic return
Single standar packaging: NEUTRAL PACKAGING (see pag. 18 num. 3.)
L Type CARTRIDGE
Volume
380 ml 10:1
D(mm)
L(mm)
63
185
D
CARTRIDGE
COAXIAL
Pneumatic Applicators
NEW MODEL
M A D E I N I TA LY
CSG II P CTX/400
15
NOZZLES AVAILABLE
FOR SOFT-PACK AND CARTRIDGES NOZZLE for soft-pack
3080036
SOFT-PACK ADAPTER for soft-pack
Thread 15 x 1,5
1060102 Thread 15 x 2,5
3080010
ALUMINIUM CARTRIDGE Threaded 15x1,5 mm
3080225
NOZZLES for aluminium cartridge
For the extrusion of product contained in soft-pack and by using the following nozzles, use:
Threaded 15x1,5 mm
THE ADAPTER FOR SOFT-PACK Cod. 3080010
3080005
4020761
3080002
3080009
ADAPTER for plastic cartridge PLASTIC CARTRIDGE Threaded 15x2,5 mm
Threaded 15x2,5mm
1020054 For the extrusion of product contained in soft-pack and by using the following nozzles, use:
NOZZLES for plastic cartridge Threaded 15x2,5 mm
THE ADAPTER FOR SOFT-PACK Cod. 3080225 3080003
16
3080188
3080189
3080190
Private Label is a CUSTOMIZATION SERVICE of the product, that P.M.T. provides to its customers. It is possible, upon request, to customize the applicators on the basis of your Brand by applying your logo, the name and the description of the item. Many P.M.T. customers take advance of our customization service for their products.
LOGO Thanks to the Private Label service, you will be able to have on both plastic and metal components a laser marking or a pad printing with your corporate Logo. As an alternative, we can customize the products with labels with printed Logo.
COLOR Keeping the style of your Brand realize individual components in the desired color, such as the handle or components of metal there avvialiamo special treatment as the anodizazzione and specific paint. We employ the best people to ensure a unique and captivating.
PERSONALIZZATO
CUSTOMIZED LABELS
ETICHETTE
LASERATURA
LASER MARKING
17
The main objective of our company is to provide QUALITY PRODUCTS whilst securing a HIGH PROFESSIONALISM, in addition to this we give the opportunity to our customers CUSTOMIZE the product, making EXCLUSIVE MARKET and easily distinguishable.
PACKAGING
1. PVC BAG, WITH GENERIC LABEL
Our Private Label service can be realized also for the packaging. Customers may require personalized boxes or labels in color or in black and white.
2. PVC BAG, WITH CUSTOMIZED LABEL 3. NEUTRAL PACKAGING, WITH GENERIC LABEL 4. NEUTRAL PACKAGING, WITH CUSTOMIZED LABEL 5. CUSTOMIZED PACKAGING, WITH P.M.T. LAYOUT 6. CUSTOMIZED PACKAGING ,WITH LAYOUT WITH YOUR LOGO
1.
3.
2. PRODUCTS CATALOGUE
M A D E I N I TA LY
4.
Pneumatic applicators
5.
7. CASE PLASTIC CUSTOMIZABLE WITH LOGO P.M.T. OR ITS OWN BRAND, THROUGH THE PROCESS OF LASER ETCHING OR LABEL.
FOR CORDLESS APPLICATORS and SPRAY GUNS SP 2015 SSP
18
For information please contact our sales office: sales@pmt.it
6.
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
M A D E I N I TA LY
NOTES :
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Pneumatic Applicators
-----------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------19
Como
Bergamo Orio al Serio
Monza
A8
4
Malpensa
A4-E6
Milano
Treviglio
Brescia E64
Antegnate
Verona E70
Linate Villafranca
Cremona
P.M.T. s.r.l. Via Guglielmo Marconi 3/7 • 24051 Antegnate (BG) Italy +39 0363 905025 +39 0363 905200 www.pmt.it info@pmt.it
Vers. 07/2021 ENG