Parqwall - Silentwall Catalog

QUARTINO_COP.indd 3

23-09-2011 13:34:51

Think wall We have designed a wallcovering to satisfy any decorative need.

QUARTINO_COP.indd 4

23-09-2011 13:34:56

Appropriate for use on almost any wallcovering application.

Available in many ABET LAMINATI colours and ďŹ nishes.

Suitable for applications where acoustic deadening is needed but also valuable for its effective design due to the proďŹ led surface.

INGLESE_01_09.indd 1

15-09-2011 15:27:30

Parqwall®

2 Abet Laminati presents a “new look” called Parqwall®, which incorporates new technical mounting solutions.

The cladding system is available with either vertical or horizontal panels in 400 mm or 600 mm widths (15 11/16” or 23 9/16”).

Parqwall® is now available with both visible anodized aluminum joints and fold-away joints, which allow the cladding material to display a completely unbroken surface. Special joints have also been produced, which allow both horizontal and vertical fixing of shelves and coat racks.

The installation procedure has been made considerably easy with the new profiles. New colours with no required minimum quantity have been added to the range.

For additional noise reduction, we recommend the attachment of an insulating material i.e. glass fibre, rock wool etc., to the wall surface.

INGLESE_01_09.indd 2

15-09-2011 15:27:31

The Parqwall® cladding system makes it possible to clad walls of any type and in any condition. It is easy to install and a quick solution to refurbishing problems in rooms for which there are no special restrictions regarding the subsequent use of the premises.

Parqwall

®

cladding system

with horizontal panels and visible anodized aluminum joints.

INGLESE_01_09.indd 3

3

15-09-2011 15:27:47

Parqwall®

4

Parqwall® cladding system with vertical panels and visible anodized aluminum joints.

The Parqwall® system can be installed directly on existing walls if they are sufficiently straight and dry. Should Parqwall® be installed on old, damp or uneven walls, it is recommended to leave a gap between the wall and the Parqwall® system. The Parqwall® system can be installed on vertical or horizontal wood spacers or on a galvanized steel frame (Knauf system or similar).

INGLESE_01_09.indd 4

15-09-2011 15:27:55

Parqwall® exhibits the same characteristics as those of a wooden panel, therefore it is important to ensure good ventilation behind the cladding panels.

When building the frame, remember that the Parqwall® panels should be mounted at a distance of at least 5 mm (3/16 in.) from the floor, to enable ventilation of the cavity behind.

When cladding particularly damp walls, the Parqwall® panels should finish at a distance of at least 50 mm (1 15/16 in.) from the floor. This will protect the base of the panel from the risk of dampness being absorbed from the floor.

INGLESE_01_09.indd 5

5

15-09-2011 15:27:57

Silentwall®

6 Silentwall ® is a noise reducing component of the modular Parqwall ® system.

Silentwall® is designed to absorb noise from highly frequented rooms, which have a high level of background disturbance.

Silentwall® is suitable for theatres, cinemas, auditoriums and convention halls where sound reduction is necessary.

INGLESE_01_09.indd 6

15-09-2011 15:27:58

Silentwall® is a noise reducing component of the modular Parqwall® system.

Silentwall

®

cladding

system with vertical panels and visible anodized aluminum joints.

INGLESE_01_09.indd 7

7

15-09-2011 15:28:07

8

Hanging accesoires Parqwall® Silentwall®

Rack joints allow the installation of several types of shelves.

When the panels are fitted horizontally, the use of rack joints allow the installation of a wide range of coat racks for offices and shops.

Panels installed horizontally with rack joints.

Panels installed vertically with the use of rack joints.

a

INGLESE_01_09.indd 8

b

15-09-2011 15:28:16

The special joints allow the installation of shelves and coat racks on the Parqwall® and Silentwall® systems.

Parqwall

®

cladding

system with vertical panels and the fitting of the rack joints.

INGLESE_01_09.indd 9

9

15-09-2011 15:28:27

10

Decors range Parqwall® Silentwall®

Parqwall® and Silentwall® are made of Print® high-pressure laminate (HPL) available in an extremely wide range of finishes, colours and wood effects.

Architects and interior designers can accomplish their projects without any aesthetic restrictions and with total creative expression. They can create bright, pleasant and very comfortable rooms, even in conditions where the existing architectural structure is particularly run down.

Parqwall® and Silentwall® can be produced without any minimum quantity in the range shown here, designed to fulfill the most demanding market requests. However, it is possible to manufacture the Parqwall® and Silentwall® cladding systems in other colours and patterns offered in the ABET LAMINATI® HPL range.

Attention: please kindly refer to the 2011>2014 ABET LAMINATI collection to confirm the availability of the chosen decor in the current range.

colours and texture

INGLESE_10_23.indd 10

410

854

810

418

413

Microline

Microline

Microline

Microline

Microline

869

893

473

477

870

871

476

Microline

Microline

Microline

Microline

Microline

Microline

Microline

479

420

868

867

846

458

857

Microline

Microline

Microline

Microline

Millerighe2

Millerighe2

Millerighe2

482

499

484

425

423

428

441

Millerighe2

Millerighe2

Millerighe2

Millerighe2

Millerighe2

Millerighe2

Millerighe2

23-09-2011 12:02:02

463

469

494

835

834

410

Millerighe2

Millerighe2

Millerighe2

Millerighe2

Millerighe2

Millerighe2

Grana2

409

457

443

444

1802

1803

858

Grana2

Grana2

Grana2

Grana2

Grana2

Grana2

Grana2

800

803

496

1804

472

476

1808

Grana2

Grana2

Grana2

Grana2

Grana2

Grana2

Grana2

867

893

837

410

406

810

418

Grana2

Grana2

Grana2

Lucida

Lucida

Lucida

Lucida

854

413

416

479

420

466

454

Lucida

Lucida

Lucida

Lucida

Lucida

Lucida

Lucida

1809

1810

472

879

421

406

812

Lucida

Lucida

Lucida

Lucida

Lucida

Grainwood

Grainwood

INGLESE_10_23.indd 11

colours and texture

460

11

15-09-2011 15:23:51

12

Decors range colours and texture

Parqwall® Silentwall®

869

868

867

893

837

897

879

Grainwood

Grainwood

Grainwood

Grainwood

Grainwood

Grainwood

Grainwood

410

406

411

810

409

Bianco Ghiaccio

Bianco Primavera

Bianco

Mini Bianco

Latte

421 Grainwood

colours

finitura Sei

INGLESE_10_23.indd 12

418

854

478

413

414

479

473

Panna Crema

Silver Bleu

Grigio Chiaro

Beige Ardenne

Sabbia

Grigio Tortora

Grigio Lapponia

495

475

420

869

1809

477

1819

Verde Grigiato

Grigio Perla

Beige Pastello

Grigio Alpaca

Azzurro Koala

Grigio

Grigio Monviso

480

870

868

1810

1820

867

871

Grigio Plomo

Grigio Lastra

Grigio Medio

Grigio Autunno

Grigio Cosmico

Grigio Cielo

Grigio Scuro

15-09-2011 15:23:54

colours

476

472

879

421

466

412

462

Grigio Inox

Grigio Londra

Grigio GraďŹ te

Nero

Mini Giallo

Avorio

Giallo Ananas

467

464

463

468

469

860

470

Giallo Paglierino

Giallo Chiaro

Giallo Pom-Pom

Giallo Canarie

Giallo Africa

Giallo Piper

Giallo Tigre

1801

862

1812

861

822

835

834

Giallo Ocra

Giallo Savana

Giallo Polenta

Giallo Pop

Melone

Arancio Canyon

Rosso Woom

432

823

431

435

828

827

866

Terra Ocra

Rosso Tango

Rosso

Rosso Antico

Rosa Baby

Rosa Singapore

Giallo Champagne

830

494

427

417

1813

813

415

Rosa Crazy Horse

Bouganville

Porpora

Rosso Terracotta

Magnolia

Beige Manhattan

Beige Chenise

416

829

812

843

842

446

Beige

Yaqui

Rosa Viola

Verde Pace

Verde Sub

Verde Pastello

INGLESE_10_23.indd 13

13 1816

Sahara Beige

15-09-2011 15:23:57

14

Decors range colours

Parqwall® Silentwall®

INGLESE_10_23.indd 14

892

893

894

837

898

897

1805

West Brown

Terra d’Ombra

Viola Fumo

Sarmiento

Bruno Fiandra

Bruno Vulcano

Rosa Nespola

890

887

891

1806

895

831

429

Darling Beige

Apricot Brown

Scotch Brown

Ruggine

Bruno Cherry

Rosso Mattone

Viola Cerise

424

836

1811

832

453

454

457

Viola Tramonto

Rosso Prugna

Rosso Barolo

Rosso Lord

Verde Papiro

Verde Caraibi

Verde Cenere

452

443

485

486

1802

841

846

Verde Lichene

Mini Verde

Azzurro Mary

Azzurro Lago

Verde Alga

Verdino

Turchese

458

444

445

459

497

491

492

Verde Libellula

Verde Salvia

Verde Chiaro

Verde Estate

Turchese Cobalto

Bleu Tundra

Verde Bond Street

1803

456

488

441

460

451

839

Verde Militare

Verde

Verde Prussia

Verde Cedro

Verde Erbetta

Sempreverde

Verde Acqua

15-09-2011 15:24:00

colours

437

490

438

845

440

450

455

Blu Giungla

Verde Mogul

Verde Mariaci

Verde Versailles

Verde Biliardo

Verde Lauro

Verde Ardizio

481

483

857

853

487

858

801

Celeste Mattino

Azzurro Maldive

Celeste Myosotis

Bleu Spazio

Azzurro Polvere

Azzurro Pervinca

Azzurro Tempesta

484

847

482

499

430

838

859

Blu ZafďŹ ro

Azzurro

Bleu Panarea

Bleu California

Lilla Gemini

Bleu Primario

Blu Faenza

1804

1818

851

428

496

849

1814

Blu Tenebre

Blu Intenso

Blu Cobalto

Blu Elettrico

Blu Esperia

Blu Pavone

Azzurro Acqua

856

850

1808

852

805

802

804

Blu Acciaio

Bleu Rada

Blu Petrolio

Big Bleu

Rosa Plumbeo

Blu Ice

Calendula

425

423

498

Lilla Erica

Viola Madras

Viola Giglio

INGLESE_10_23.indd 15

15

15-09-2011 15:24:03

16

Decors range Parqwall® Silentwall®

serie cresp 1422

1522

1419

1424

1524

Cresp

Cresp Due

Cresp

Cresp

Cresp Due

1420

1520

1413

1513

1421

1521

1415

Cresp

Cresp Due

Cresp

Cresp Due

Cresp

Cresp Due

Cresp

1515

1414

1410

1423

1523

1418

1518

Cresp Due

Cresp

Cresp

Cresp

Cresp Due

Cresp

Cresp Due

251

244

200

202

243

Lucida

Lucida

Lucida

Lucida

Soft

1087

1030

1089

1091

1086

vertical line finitura Sei

255

265

Soft

Soft

fiber

INGLESE_10_23.indd 16

15-09-2011 15:24:05

fiber

1032

1097

1038

1039

1048

1046

1047

1170

1123

1114

1134

1117

milano

ďŹ nitura Soft

1137

1100

1120

1101

1121

1107

1127

1171

1140

1106

1126

1177

1149

1116

1136

1168

1146

1104

1124

1112

1132

INGLESE_10_23.indd 17

17

15-09-2011 15:24:14

18

Decors range Parqwall® Silentwall®

legni

INGLESE_10_23.indd 18

388

381

387

Douglas Microline

Douglas Chiaro Microline

Douglas Scuro Microline

382

392

389

391

Douglas Medio Microline

Douglas Microline

Douglas Microline

Douglas Microline

659

660

661

316

Pino Svizzera Microline

Pino Savoia Microline

Pino Chambery Microline

Pommier Morbida

1642

367

1637

324

Pero Italiano Soft

Pero Svizzero Morbida

Pero Marine Soft

Acero Bahia Sei Due

1678

385

1677

364

Acero Due Morbida

Acero Sei Due

Acero Due Morbida

Ontano Chiaro Morbida

365

1618

362

1636

Ontano Medio Morbida

Noce Rosato Sei Due

Noce Torino Morbida

Noce Italiano Morbida

15-09-2011 15:24:22

legni

1329

1328

1365

624

Noce Bossea Morbida

Noce Rigato Morbida

Noce Top Morbida

Noce Roero Sei Due

358

1621

1612

321

Noce Crea Morbida

Teak Maldive Morbida

Teak Sumatra Sei Due

Teak Asia Sei Due

384

383

1355

658

Rovere Toscano Sei Due

Rovere Europa Sei Due

Oak Sei Due

Oak Nature Sei Due

386

1619

1661

1379

Rovere Nazionale Sei Due

Rovere Trasv.le Sei Due

Rovere Montano Morbida

Rovere Sud Morbida

650

653

657

655

Rovere Texas Sei Due

Rovere Dallas Sei Due

Rovere America Sei Due

Rovere Riverwalk Sei Due

656

1372

1321

1322

Rovere Tennessee Sei Due

Continental Oak Morbida

Rovere Stiria Morbida

Rovere Carinzia Morbida

INGLESE_10_23.indd 19

19

15-09-2011 15:24:30

20

Decors range legni

Parqwall® Silentwall®

INGLESE_10_23.indd 20

373

1611

1623

380

Rovere Trentino Morbida

Ciliegio Fey Sei Due

Ciliegio Americ. Soft

Ciliegio Europeo Sei Due

1609

1664

352

1643

Ciliegio Pavese Sei Due

Ciliegio Naturale Morbida

Ciliegio Canino Morbida

Ciliegio Rosa Morbida

370

374

1373

354

Olmo Fine Soft

Castagno Morbida

Mogano Virginia Morbida

Sucupira Morbida

1614

1615

320

1610

Frassino Beige Sei Due

Frassino Rosa Sei Due

Frassino Lidia Sei Due

Cherry Sei Due

1647

1646

1666

1367

Faggio Norvegia Sei Due

Faggio Italia Morbida

Faggio Americ. Sei Due

Faggio Veneto Morbida

323

315

312

314

Oak Scuro Nutshell

Wengè Nutshell

Wengè Nutshell

Wengè Nutshell

15-09-2011 15:24:37

legni

313

1306

1651

1620

Wengè Nutshell

Radica Olmo Morbida

Forest Sei Due

Ebano Sei Due

1317

1304

1628

Morbida

Morbida

Morbida

1309

1324

1354

1352

Morbida

Morbida

Sei Due

Sei Due

1318

1347

1346

1348

1672

1673

1675

1697

1686

1706

Ciliegio Wood

Ontano Wood

Wengè Wood

legni speciali

Nutshell

1342

printwood

INGLESE_10_23.indd 21

21

15-09-2011 15:24:42

22

Decors range printwood

Parqwall® Silentwall®

1688

1699

1689

1696

Betulla Tavolata finitura Sei Due

Aframosia

Faggio Wood

Mutenye Wood

1684

1700

1701

1704

Rovere Wood

Rovere Chiaro

Rovere Decapè

Decapè Chiaro

1705

1693

1698

1690

Decapè Grigio

Tanganica Wood

Noce Chiaro Tavolato Wood

Teak Wood

1685

1683

1649

1702

Acero Wood

Olmo Americano

Zebrano

Zapatero Chiaro

1216

1210

1198

1703 Zapatero Scuro

serigrafia

finitura Sei

INGLESE_10_23.indd 22

15-09-2011 15:24:45

serigrafia

1238

1233

1239

1240

1242

1243

1241

1232

1230

1231

1244

5417

5418

5419

Lucida

Lucida

Soft

5422

5423

5533

5537

Soft

Lucida

digital print

5532

INGLESE_10_23.indd 23

23

15-09-2011 15:24:51

Illustration of profiles Parqwall® Silentwall®

Visible profiles

Special elements

Head or end profile This is used as a starting or end profile on lower, upper and lateral edges.

Rack joint This is used for joining two panels to be fixed vertically and provides the cladding system with supports for shelves and other accessories.

End profile for inside corners Th i s i s u se d f o r t h e re a liz a t io n of i n si de c or ne r s .

Horizontal joint allowing the fixing of shelves and accessories This joint is used as a connecting element between two panels laid horizontally, and allows the walls to be fitted with shelving supports and other furnishing items.

Two-way joint Profile used for joining two panels, both for horizontal and vertical installation.

Click aluminum corner joint with support This is used for joining the butt edges of the panels and especially the covering of pillars.

Fold-away profiles Fold-away profiles Structural profile which can be used as starting or end profile on lower, upper and lateral edges.

Fold-away two-way joint This is used for joining two panels, both for horizontal and vertical installation.

INGLESE_24_32.indd 25

25

15-09-2011 15:38:45

Illustration of profiles Parqwall® Silentwall®

26

Panels fitted vertically

For the optimal installation it is essential that the wall (or the support and ventilation frame) is absolutely plumb. This will guarantee a perfect finishing to the internal corners and external edges of the room.

Two-way joint

1. Base profile (end or fold-away end profile).

Prepare the base horizontal profile by cutting it to the required length. Fix the base profile to the wall (or the support frame) allowing a gap of at least 5 mm (3/16 in.) from floor level: this will enable ventilation of the cavity behind. When cladding particularly damp walls, it is necessary to leave a gap of at least 50 mm (1 15/16 in.) from floor level so as to protect the base of the panel from the risk of water being absorbed by the floor.

Before tightening the fixing screws, check that the profile is absolutely horizontal. Should it not be, adjust the position by using a spirit level and then tighten the screws.

2. Vertical starting profile (end or fold-away end profile, end profile for inside corners – for corners - click aluminium corner joint with support – for edges).

Prepare the vertical profile by cutting it to the required length. Fix the starting end profile to the wall (or the support frame). Before tightening the fixing screws, check that the profile is absolutely vertical. Should it not be, adjust the position and then tighten the screws.

cut at 45°

45°

3. Top capping profile (end or fold-away end profile).

Place the horizontal end profile above the end of the panelling. Fix the profile to the wall (or the support frame), and position and tighten the screws only sufficiently to allow them to slide freely in the slotted holes.

4. Panel.

Prepare the first Parqwall® panel by cutting it to the required length and then slide it within the two installed guides.

Two-way joint cut at 45°

5. Joint between two panels (two-way joint or rack joint or fold-away joint).

Prepare the first Parqwall® panel by cutting it to the required length and then slide it within the two installed guides. Fix the joint to the wall (or the support frame). Then position the next panel to engage the slot on the installed profile.

Head

6. End profile for inside corners.

When the Parqwall® forms an inside angle, install the last panel on the wall, trimmed exactly to the size of the remaining wall, insert it in the end profile for inside corners, leaving the surface with the slotted lots visible, then fix it to the wall or to the support frame.

or end profile

Important: when installing Parqwall® with visible aluminum joints, these must be cut at 45°angle, when they come together.

INGLESE_24_32.indd 26

7. Final panel.

Position the last panel of each wall by trimming it across its width according to the maximum width allowed by the sliding of the end profile. Position the profile and tighten the screws only sufficiently to allow them to slide freely in the slotted holes. Insert the panel into the guides and then fix it into position by sliding the end profile.

15-09-2011 15:38:47

Illustration of profiles Parqwall® Silentwall®

Panels fitted horizontally

For the optimal installation it is essential that the wall (or the support and ventilation frame) is absolutely plumb. This will guarantee a perfect finishing to the internal corners and external edges of the room.

Two-way joint cut at 45°

45°

Two-way joint cut at 45°

Head or end profile

1. Base profile (end or fold-away end profile).

Prepare the base horizontal profile by cutting it to the required length. Fix the profile to the wall (or the support frame) allowing a gap of at least 5 mm (3/16 in.) from floor level: this will enable ventilation of the cavity behind. When cladding particularly damp walls, it is necessary to leave a gap of at least 50 mm (1 15/16 in.) from floor level so as to protect the base of the panel from the risk of water being absorbed by the floor. Before tightening the fixing screws, check that the profile is absolutely horizontal. Should it not be, adjust the position by using a spirit level and then tighten the screws.

2. Vertical starting profile (end or fold-away end profile, end profile for inside corners – for corners - click aluminium corner joint with support – for edges).

Prepare the vertical profile by cutting it to the required length. Fix the starting end profile to the wall (or the support frame). Before tightening the fixing screws, check that the profile is absolutely vertical. Should it not be, adjust the position and then tighten the screws.

3. Top capping profile (end or fold-away end profile).

Place the end profile above the end of the panelling. Fix the profile to the wall (or the support frame), and position and tighten the screws only sufficiently to allow them to slide freely in the slotted holes.

4. Panel.

Prepare the first panel by cutting it to the required length and then slide it within the two installed guides.

5. Joint between two panels (two-way joint or rack joint or fold-away joint).

Prepare the joint by cutting it to the required length. Insert the joint in the installed panel slot in such a way that the surface with the slotted holes is visible. Fix the joint to the wall (or the support frame). Then position the next panel to engage the slot on the installed profile.

6. Head joint between two panels (two-way joint or fold-away joint).

Prepare the joint by cutting it according to the width of the panel. Insert the joint in the installed panel slot in such a way that the surface with the slotted holes is visible.

Important: when installing Parqwall® with visible aluminum joints, these must be cut at 45°angle, when they come together.

INGLESE_24_32.indd 27

7. End profile for inside corners.

When the Parqwall® forms an inside angle, install the last panel on the wall , trimmed exactly to the size of the remaining wall, insert it in the end profile for inside corners, leaving the surface with the slotted lots visible, then fix it to the wall or to the support frame.

27

15-09-2011 15:38:48

Parqwall® Technical features

28

Parqwall® is the material suitable for cladding existing walls, whatever condition they may be in. It is resistant to wear, shock, dampness, fire, acids and light, that is to any surface affecting agents, both internal and external. The Parqwall® cladding system has optimal resistance to fire.

Parqwall® is manufactured with materials which are completely resistant to any type of microorganisms and is therefore particularly suitable for cladding in hospitals, nurseries, schools and in all places where hygiene is of paramount importance. Although hard and durable, this material recreates the warmth typical of wood and other natural materials.

It is also practical, antistatic and does not attract dust. All these features make it particularly suitable for spaces difficult to maintain, for example bars, restaurants, showrooms, doctors’ surgery rooms and large spaces in general.

Anti-vandalism. As already mentioned, Parqwall®’s unique characteristic is its extraordinary resistance to scratches, abrasion, shock, chemicals, ink and spray paints. Parqwall® is coated on both sides with a high pressure HPL laminate.

Anti-stain. Parqwall® is resistant to the most common types of stains (as laid down in the European Standard EN 438) and can be easily cleaned with water and ammonia and, if necessary, with organic solvents.

Resistance to dampness. The special installation technique and the physical and chemical characteristics of its components give the Parqwall® panel surfaces their optimum water repellent qualities and resistance to dampness.

Sound proofing/insulating. Parqwall® possesses inherent optimum sound proofing/insulating properties, but in order to obtain best performance it is advisable to insert another insulating material between the panels and the wall: glass fibre, rock wool, etc.

Thermal insulation. Parqwall® is a thermally insulating material. Its comfort characteristics help to retain heat and reduce heating costs.

Thermal transmittance. r=

0,0080 0,16

= 0,05

m2 h °C Cal

- 0,0080= thickness of material in linear meters - 0,16 = thermal conductivity

Reaction to fire. Euroclass: EN1350-1 C-s2, d0 Available on request the Parqwall® FR (Euroclass: EN 1350-1 B-s2, d0) Dimensions. The Parqwall® panels are available in the following sizes: 400/600x2400 mm (15 11/16 or 23 9/16 in x 94 8/16 in.) (WxL) for the Printwood range, 400/600x3000 mm (15 11/16 or 23 9/16 in. x 118 2/16 in.) (WxL) for all other ranges. Panels can be installed either horizontally or vertically. The Parqwall® panels are made of high-pressure plastic laminate (HPL) glued to a high density wood fibre core (HDF = High-Density Fiberboard) of approx. 8 mm (5/16 in.) thickness. Each panel is provided with a longitudinal slot on all 4 sides to allow insertion of various profiles.

Joining. The joint between the panels and the wall is made by means of a simple anodized extruded aluminum profile system. The profiles are provided with slotted holes at ‘500 mm (19 11/16 in.) intervals used to permit each section to be fixed to the wall (or to the supporting and levelling frame behind) by means of screws. The slotted holes make it possible to adjust the level of the panelling and to lock it into position by sliding the end profile, when this is used as a finishing element, both for horizontal and vertical installation.

INGLESE_24_32.indd 28

15-09-2011 15:38:49

SilentwallÂŽ Technical features

SilentwallÂŽ is a noise-reducing development of the modular ParqwallÂŽ system.

SilentwallÂŽ is designed to absorb noises from highly-frequented rooms and with a high level of background disturbance.

The values measured show that Silentwall is ideal for absorbing medium to high frequencies, that is for ofďŹ ces, areas of high trafďŹ c, conference rooms and theatres.

The above are obtained with the insertion of a 30 mm-thick (1 2/16 in.) polyester sheet insulation between the panel and the wall.

Noise reduction is the ability to dissipate acoustic energy, and is expressed as a coefficient (a) indicated with values between 0 (zero noise-reduction) and 1 (total noise reduction). ‡ Test carried out on SILENTWALLŽ as per UNI EN 20354/93 standard Test frequency

Average values measured (đ?›‚)

Reference scale

100 < HZ > 315 Low frequency

0,28

0 < Îą < 0,3 Low noise-reduction

400 < HZ > 1250 Medium frequency

0,73

0,6 < Îą < 1 High noise-reduction

1600 < HZ > 5000

0,41

Front of panel dimensions in mm

0,3 < Îą < 0,6 Medium noise-reduction

High frequency

Back of panel dimensions in mm 24

4

24

24

Forum haul 5 mm

32

32

8

4

Dimensional Tolerance +/- 0,2 mm

Dimensional Tolerance +/- 0,2 mm

Panel Dimension: 600x3000 mm

Panel Dimension: 600x3000 mm

INGLESE_24_32.indd 29

29

15-09-2011 15:38:49

Commercial data Parqwall® Silentwall®

30

Commercial data Parqwall® Range Colours and texture, Colours, Serie Cresp, Vertical Line, Decori Minimi, Fiber, Serie Milano, Legni, Serie Orientali, Serie Radiche, Serie Aceri, Printwood, Serigrafia 2000 Digital Print

Total thickness

Weight

Standard

Packaging

8,3 ± 0,3 mm (5/16 in.)

Kg/mq 8,2 (1.64 lbs per sq.ft.)

400/600 mm (15 11/16 or 23 9/16 in.) (width) 2400/3000 mm (94 8/16 or 118 2/16 in.) (length)

panels on pallets

Technical specification reference: panels produced from the section of a compound material consisting of an HDF wooden fibre core with an external Print® HPL laminate surface balanced with a Print® HPL laminate.

The panels are also milled along the sides creating a groove suitable for the insertion of the aluminium profiles making up the panel support structure to the wall. The profiles are of silver anodized aluminum and enable the installation of the panels both horizontally and vertically. These profiles can be visible or fold-away.

Commercial data Parqwall® FR Range Colours and texture, Colours, Serie Cresp, Vertical Line, Decori Minimi, Fiber, Serie Milano, Legni, Serie Orientali, Serie Radiche, Serie Aceri, Printwood, Serigrafia 2000 Digital Print

Total thickness

Weight

Standard

Packaging

7,9 ± 0,3 mm

Kg/mq 7,7 (1.57 lbs per sq.ft.)

400/600 mm (15 11/16 or 23 9/16 in.) (width) 2400/3000 mm (94 8/16 or 118 2/16 in.) (length)

panels on pallets

Technical specification reference: panels produced from the section of a compound material consisting of an HDF wooden fibre core with an external Print® HPL laminate surface balanced with a Print® HPL laminate.

The panels are also milled along the sides creating a groove suitable for the insertion of the aluminium profiles making up the panel support structure to the wall. The profiles are of silver anodized aluminum and enable the installation of the panels both horizontally and vertically. These profiles can be visible or fold-away.

Commercial data Silentwall® Range Colours and texture, Colours, Serie Cresp, Vertical Line, Decori Minimi, Fiber, Serie Milano, Legni, Serie Orientali, Serie Radiche, Serie Aceri, Printwood, Serigrafia 2000 Digital Print

Total thickness

Weight

Standard

Packaging

7,9 ± 0,3 mm

Kg/mq 6,5 (1.33 lbs per sq.ft.)

400/600 mm (15 11/16 or 23 9/16 in.) (width) 2400/3000 mm (94 8/16 or 118 2/16 in.) (length)

panels on pallets

Technical specification reference: panels produced from the section of a compound material consisting of an HDF wooden fibre core with an external Print® HPL laminate surface balanced with a Print® HPL laminate.

Noise reduction obtained by milling the panel, parallel to the long side on the back and on the decor( pitch 4/24 mm). This will create a 15% surface perforation with holes radius 6 mm. The panels are also milled along the sides creating a groove suitable for the insertion of the aluminum profiles making up the panel support structure to the wall. The profiles are of silver anodized aluminum and enable the installation of the panels both horizontally and vertically. These profiles can be visible or foldaway.

INGLESE_24_32.indd 30

15-09-2011 15:38:50

Technical data Parqwall® Silentwall®

Ecological E1

Technical data Parqwall® Abrasion resistance

Thickness swelling

Scratch resistance

Impact resistance

Stain resistance

Colour resistance to xenon light

Test method

EN 438-2.6

EN 13329 Annex G

Criteria and/or unit of measure

Revs

%

(N)

(N)

Grade: groups 1 e 2 groups 3 e 4

Grade

Result

IP- revs> 400

8,0

2,5

≥ 22

no alteration

>6

Abrasion resistance

Thickness swelling

Scratch resistance

Impact resistance

Stain resistance

Test method

EN 438-2.6

EN 13329 Annex G

Criteria and/or unit of measure

Revs

%

(N)

(N)

Grade: groups 1 e 2 groups 3 e 4

Grade

Result

IP- revs> 400

8,0

2,5

≥ 22

no alteration

>6

Resistance to cigarette burns

Surface electrical resistance

Reaction to fire

NFPA 99

13501

Grade

ohm Ω

Category (class)

>4 no alteration

The material is antistatic

C-s2, d 0

Resistance to cigarette burns

Surface electrical resistance

Reaction to fire

NFPA 99

13501

Grade

ohm Ω

Category (class)

>4 no alteration

The material is antistatic

B-s2, d 0

Resistance to cigarette burns

Surface electrical resistance

Reaction to fire

NFPA 99

13501

EN 438-2.14 EN 438-2.11 EN 438- 2.15 EN 438-2.16 EN 438-2.18

Ecological E1

Technical data Parqwall® FR

Colour resistance to xenon light

EN 438-2.14 EN 438-2.11 EN 438- 2.15 EN 438-2.16 EN 438-2.18

Ecological E1

Technical data Silentwall® Abrasion resistance

Thickness swelling

Test method

EN 438-2.6

EN 13329 Annex G

Criteria and/or unit of measure

Revs

%

(N)

(N)

Grade: groups 1 e 2 groups 3 e 4

Grade

Grade

ohm Ω

Category (class)

Result

IP- revs> 400

8,0

2,5

≥ 22

no alteration

>6

>4 no alteration

The material is antistatic

B-s2, d 0

INGLESE_24_32.indd 31

Scratch resistance

Impact resistance

Stain resistance

Colour resistance to xenon light

EN 438-2.14 EN 438-2.11 EN 438- 2.15 EN 438-2.16 EN 438-2.18

31

23-09-2011 13:39:08

INGLESE_24_32.indd 24

15-09-2011 15:38:39

PL S.p.A. 22070 VERTEMATE (CO) Strada per Bulgorello, 3 Tel. 031.888.211 Fax 031.901.053 parqcolor@pl-abetgroup.it

p Progetto grafico

Effige (Mi) p Stampatore

La Grafica Rampoldi

Company with quality system as per UNI EN ISO 9001: 2008 cert. n°69

QUARTINO_COP.indd 2

Graphic Design: Effige (MI) Print: arti grafiche maspero fontana & c. spa

PL S.p.A. 22070 VERTEMATE (CO) ITALY Strada per Bulgorello, 3 Tel. +39.031.888.211 Fax +39.031.901.053 sales@pl-abetgroup.it

23-09-2011 13:34:43