Page 1


FREQUENTLY ASKED CENTERFORCE TECHNICAL QUESTIONS Disclaimer The information presented in the following pages is accurate to the best of our knowledge. However, Midway Industries, Inc. / Centerforce® is not responsible for any inaccuracies that may be found. WHICH CENTERFORCE CLUTCH SYSTEM IS BEST FOR MY VEHICLE? IT IS IMPORTANT TO MATCH THE PROPER CENTERFORCE CLUTCH SYSTEM WITH THE VEHICLE AND ITS INTENDED USE! TO ANSWER THIS QUESTION PROPERLY, SEVERAL THINGS MUST BE TAKEN INTO CONSIDERATION. 1.

WHAT ARE THE VEHICLES' MAKE, MODEL, YEAR AND ENGINE SIZE?

2.

WHAT IS THE VEHICLE USED FOR? (DAILY DRIVING, TOWING, OFF ROAD, COMPETITION USE, ETC.).

3.

WHAT TYPE OF CHANGES HAVE BEEN MADE TO THE VEHICLE?

4.

IS THE ENGINE STOCK OR HAS IT BEEN MODIFIED? IF THE ENGINE HAS BEEN MODIFIED, TO WHAT EXTENT? (HI FLOW FILTER, COMPUTER CHIP, EXHAUST MODIFICATIONS, SUPER CHARGERS, NITROUS, ETC.).

5.

HAVE ANY DRIVELINE CHANGES BEEN MADE? (DIFFERENT SIZE TIRES, DIFFERENT GEAR RATIO, ETC.).

6.

HAS ANY EXTRA EQUIPMENT (WEIGHT) BEEN ADDED TO THE VEHICLE? (CAMPER, WINCH, TUBE BUMPER, ROLL CAGE, ETC.).

! WARNING DUST HAZARD. Centerforce® does not use friction materials that contain Asbestos. However; older non-Centerforce® clutches may be have been formulated with these materials. Breathing dusts from these products has been linked to LUNG DISEASE AND CANCER HAZARDS. To reduce your risks of serious injury: •

AVOIDE CREATING AND BREATHING CLUTCH/FRICTION DUSTS DURING REPLACEMENT WORK.

WEAR A HIGH-EFFICIENCY MASK OR DUST RESPIRATOR DURING CLEANING IF YOU ARE UNSURE WHETHER CLUTCH/FRICTION DUSTS MAY CONTAIN ASBESTOS FIBERS. WET SURFACES WITH EITHER WATER OR BRAKE CLEANER AND USE RAGS TO CLEAN IF NECESSARY. PROPERLY DISPOSE OF RAGS IN AN AIR-TIGHT CONTAINER.

NEVER GRIND OR USE COMPRESSED AIR IN AND AROUND FRICTION PRODUCTS.

READ AND FOLLOW ALL CLUTCH-RELATED INSTRUCTIONS AND WARNINGS IN YOUR VEHICLE SERVICE MANUAL


WHAT IS NECESSARY TO PROPERLY INSTALL MY NEW CENTERFORCE CLUTCH? ALL PATENTED CENTERFORCE CLUTCHES ARE DESIGNED TO BE A DIRECT BOLT IN HIGH PERFORMANCE CLUTCH SYSTEM NEEDING NO SPECIAL MODIFICATIONS FOR INSTALLATION.

CLUTCH INSTALLATION GENERAL GUIDELINES. BE PREPARED TO CHECK AND DO THE FOLLOWING: 1. IT IS ALWAYS RECOMMENDED TO REFER TO YOUR FACTORY SERVICE MANUAL FOR CLUTCH INSTALLATION SPECIFICATIONS REGARDING YOUR PARTICULAR MAKE AND MODEL OF VEHICLE. 2. REPLACE BOTH THE PRESSURE PLATE AND DISC ASSEMBLY. THEY WORK TOGETHER ALWAYS REPLACE THEM TOGETHER. (NEVER USE A NEW DISC WITH A WORN PRESSURE PLATE) 3. DETERMINE THE CAUSE OF ORIGINAL CLUTCH FAILURE! IF REPLACEMENT IS FOR OTHER THAN NORMAL WEAR, THE CAUSE OF FAILURE MUST BE PROPERLY DIAGNOSED AND REPAIRED. IF OIL IS PRESENT ON THE OLD CLUTCH ASSEMBLY, THE LEAK MUST BE CORRECTED BEFORE INSTALLING A NEW CLUTCH ASSEMBLY. 4. CLEAN AND THEN CHECK THE SPLINES ON THE TRANSMISSION INPUT SHAFT FOR SIGNS OF ABNORMAL WEAR OR TWISTING, THEN SLIDE THE NEW DISC ON THE INPUT SHAFT CHECKING FOR FREE MOVEMENT OVER THE SPLINES. 5. THE FLYWHEEL SHOULD BE RESURFACED TO THE ORIGINAL SPECIFICATIONS, THIS WILL INSURE PROPER, TROUBLE FREE CLUTCH PERFORMANCE AND OPERATION. 6. REMOVE ALL TRACES OF OIL OR GREASE FROM THE FLYWHEEL AND PRESSURE PLATE ASSEMBLY USING A NON-PETROLEUM BASED CLEANER. (BRAKE CLEANER WORKS WELL) 7. THOROUGHLY CLEAN AND INSPECT ALL CLUTCH LINKAGE PARTS (FORK, CLEVIS, PINS, ETC.) AND REPLACE ANY PARTS SHOWING SIGNS OF WEAR OR DAMAGE. 8. ALWAYS REPLACE THE THROWOUT BEARING AND PILOT BUSHING/ BEARING (WHERE APPLICABLE), AND SPARINGLY LUBRICATE THE THROW OUT BEARING RETAINING COLLAR SURFACE AFTER INSPECTING FOR SIGNS OF WEAR OR GALLING. 9. BE SURE THAT ANY SPECIAL FASTENERS (SHOULDERED BOLTS, FLYWHEEL DOWEL PINS, ETC.) ARE USED AND PLACED IN THEIR PROPER LOCATIONS 10. ALWAYS USE A PROPER CLUTCH ALIGNMENT TOOL DURING INSTALLATION TO INSURE CORRECT POSITIONING OF THE PRESSURE PLATE ASSEMBLY, DISC AND PILOT BUSHING/BEARING. 11. TORQUE ALL PRESSURE PLATE AND FLYWHEEL ASSEMBLY BOLTS TO MANUFACTURERS SPECIFICATIONS USING A PROGRESSIVE CRISSCROSS PATTERN. 12. ADJUST CLUTCH PEDAL FREEPLAY (WHERE APPLICABLE) TO CORRECT ORIGINAL SPECIFICATIONS. THIS IS A VERY IMPORTANT STEP THAT INSURES PROPER OPERATION, PERFORMANCE AND CLUTCH LONGEVITY.


HOW LONG CAN I EXPECT MY NEW CENTERFORCE CLUTCH TO LAST ME? ALL PATENTED CENTERFORCE PRODUCTS ARE DESIGNED WITH LONGEVITY IN MIND, HOWEVER, CLUTCH LIFE WILL GREATLY DEPEND ON THE VEHICLE, YOUR TYPE OF DRIVING AND OUTPUT OF THE ENGINE. FOR EXAMPLE A VEHICLE DRIVEN IN HEAVY STOP AND GO TRAFFIC WILL HAVE A SHORTER CLUTCH LIFE THAN THE SAME VEHICLE THAT IS DRIVEN ON THE OPEN HIGHWAY. REGARDING TRUCKS WITH OVERSIZED DIAMETER TIRES, THEY WILL TYPICALLY GET LESS CLUTCH LIFE THAN A TRUCK WITH STOCK TIRE SIZE.

NOTE: APPROPRIATE FINAL DRIVE GEAR RATIO CHANGES ARE NECESSARY AND WILL GREATLY AID DRIVELINE LONGEVITY (INCLUDING THE CLUTCH) ON VEHICLES CARRYING HEAVY LOADS OR USING OVERSIZED DIAMETER TIRES. WILL A CENTERFORCE CLUTCH INCREASE MY PEDAL EFFORT CAUSING DAMAGE TO MY CABLE, HYDRAULICS OR MECHANICAL LINKAGE? CENTERFORCE CLUTCH SYSTEMS UTILIZE OUR PATENTED CENTERFORCE WEIGHT SYSTEM WHERE APPLICABLE, THIS COMBINED WITH OUR SUPERIOR FRICTION MATERIALS ALLOW US TO ENGINEER CLUTCH PRODUCTS THAT INCREASE PERFORMANCE WITHOUT INCREASING CLUTCH PEDAL EFFORT. THIS IS IMPORTANT IN ORDER TO MAINTAIN COMFORTABLE DRIVEABILITY AS WELL AS TO PREVENT OVERLOADING THE RELEASE MECHANISM.

DOES CENTERFORCE RECOMMEND USING A LIQUID THREAD LOCKER ON PRESSURE PLATE AND FLYWHEEL BOLTS? YES, USING A MEDIUM VISCOCITY LIQUID THREAD LOCKER REDUCES THE POSSIBILITY OF PRESSURE PLATE AND FLYWHEEL BOLTS FROM COMING LOOSE.

WHAT TYPE OF FLYWHEEL IS BEST RECOMMENDED FOR MY APPLICATION? OUR FRICTION MATERIALS ARE DESIGNED TO BE USED WITH THE STOCK FLYWHEEL, AFTERMARKET STEEL BILLET FLYWHEELS, OR ALUMINUM FLYWHEELS WITH STEEL INSERT HEAT SHIELDS. IF YOU ARE REPLACING YOUR STOCK O.E.M. FLYWHEEL, BE SURE THAT THE NEW FLYWHEEL MEETS THE SAME SPECIFICATIONS, SUCH AS RING GEAR TOOTH COUNT, FLYWHEEL THICKNESS, RING GEAR OFFSET, ETC. ALL BILLET CENTERFORCE FLYWHEELS ARE DESIGNED TO MEET STANDARD O.E.M. SPECIFICATIONS, AND ARE S.F.I. APPROVED.

DOES CENTERFORCE REQUIRE THE FLYWHEEL TO BE RESURFACED BEFORE INSTALLING A NEW CLUTCH? YES! FLYWHEELS ARE SUBJECT TO HEAT, SCORING AND WARPING DURING USE; THEREFORE THE FLYWHEEL SHOULD ALWAYS BE PROPERLY RESURFACED OR REPLACED TO ASSURE GOOD CLUTCH PERFORMANCE. RESURFACING MUST BE PERFORMED ON A QUALIFIED FLYWHEEL GRINDING MACHINE. CENTERFORCE DOES NOT RECOMMEND RESURFACING FLYWHEELS ON A LATHE OR A BLANCHARD GRINDER. ALSO, BE AWARE THAT USING A HAND-HELD ELECTRIC OR PNEUMATIC GRINDER/SANDER OR SCUFFING THE SURFACE WITH SANDPAPER DOES NOT CONSTITUTE A PROPERLY RESURFACED FLYWHEEL. REFER TO YOUR FACTORY SERVICE MANUAL FOR SPECIFICS ON YOUR VEHICLE REGARDING FLYWHEEL RESURFACING AND SPECIFICATIONS (FLAT, STEP, ETC.).SOME VEHICLES REQUIRE NEW REPLACEMENT FLYWHEELS INSTEAD OF RESURFACING. PLEASE CONSULT THE FACTORY SERVICE MANUAL OR CALL OUR TECH. LINE AT (928) 771-8422 IF YOU HAVE ANY QUESTIONS

IS IT NECESSARY TO USE THE ALIGNMENT DOWEL PINS ON MY FLYWHEEL? ON FLYWHEELS THAT ORIGINALLY USE ALIGNMENT DOWEL PINS, THE ANSWER IS YES! THE ALIGNMENT DOWEL PINS PROPERLY LOCATE THE PRESSURE PLATE TO THE FLYWHEEL FOR BALANCE PURPOSES AS WELL AS ADD PRESSURE PLATE TO FLYWHEEL SHEAR STRENGTH. THE ALIGNMENT DOWEL PINS SHOULD ALWAYS BE REPLACED IF THEY ARE DAMAGED, BROKEN OFF, OR MISSING FROM THE FLYWHEEL.

WHAT TYPE OF PRESSURE PLATE BOLTS SHOULD BE USED WITH MY CENTERFORCE CLUTCH? CENTERFORCE CLUTCHES ARE DESIGNED TO BE USED WITH STOCK O.E.M. STYLE BOLTS OR AFTERMARKET BOLTS DESIGNED SPECIFICALLY FOR PRESSURE PLATE RETENTION. CLUTCH HARDWARE MUST ENDURE HIGH LOADS, BE SURE REPLACEMENT BOLTS ARE OF HIGH QUALITY AND MATCH STOCK O.E.M. BOLT CONFIGURATION, (I.E. IF STOCK BOLTS ARE SHOULDERED, REPLACEMENT BOLTS SHOULD BE SHOULDERED TOO).

WHAT ARE THE CLUTCH BOLT TORQUE SPECIFICATIONS? BOLT TORQUE VALUE SHOULD BE DETERMINED BY THE BOLT MANUFACTURER OR IF USING STOCK O.E.M. BOLTS, REFER TO YOUR VEHICLES SERVICE MANUAL FOR PROPER TORQUE SPECIFICATIONS. PROPER TORQUE IS CRUCIAL TO YOUR SAFETY, TAKE THE TIME TO GET THE CORRECT PRESSURE PLATE ASSEMBLY AND FLYWHEEL BOLT TORQUE SPECIFICATIONS AND TIGHTEN THE BOLTS CORRECTLY USING A HIGH QUALITY TORQUE WRENCH.


ARE THERE ANY SPECIAL MODIFICATIONS NECESSARY TO INSTALL A CENTERFORCE CLUTCH? ALL PATENTED CENTERFORCE CLUTCH ASSEMBLIES ARE DESIGNED TO BE A DIRECT BOLT IN REPLACEMENT FOR THE STOCK CLUTCH ASSEMBLY. IF ANY OF THE SURROUNDING CLUTCH COMPONENTS (BELLHOUSING, FLYWHEEL, LINKAGE, ETC) HAVE BEEN CHANGED FROM ORIGINAL, BE SURE THEY MATCH STOCK (O.E.M.) SPECIFICATIONS, OR CONTACT OUR TECHNICAL DEPARTMENT AT (928) 771-8422 FOR ASSISTANCE.

ARE CENTERFORCE CLUTCHES PRE-BALANCED? YES! ALL CENTERFORCE CLUTCH ASSEMBLIES ARE BALANCED TO ORIGINAL FACTORY EQUIPMENT SPECIFICATIONS.

DOES CENTERFORCE RECOMMEND CHANGING THE PILOT BEARING/BUSHING WHEN INSTALLING A NEW CLUTCH? YES, IF YOUR VEHICLE IS EQUIPPED WITH A PILOT BUSHING OR BEARING, IT IS ALWAYS RECOMMENDED TO REPLACE IT DURING THE NEW CLUTCH INSTALLATION PROCESS. WHERE APPLICABLE, IT IS RECOMMENDED TO UPGRADE FROM A PILOT BUSHING TO A ROLLER NEEDLE OR BALL BEARING TYPE PILOT BEARING.

DO CENTERFORCE CLUTCHES REQUIRE A BREAK IN PERIOD? YES. IT IS RECOMMENDED TO PROPERLY SEAT IN THE NEW PRESSURE PLATE & DISC ASSEMBLY TO ASSURE GOOD CLUTCH PERFORMANCE. CENTERFORCE RECOMMENDS 450-500 MILES OF IN TOWN STOP AND GO TYPE OF EASY DRIVING BEFORE APPLYING FULL POWER. IF YOUR DRIVING CONSISTS OF MAINLY HIGHWAY TYPE USE, THE BREAK IN PERIOD SHOULD BE LONGER THAN THE 450-500 MILES. IF THE BREAK IN PERIOD IS NOT PROPERLY FOLLOWED, CLUTCH LIFE AND PERFORMANCE CAN BE SACRIFICED.

CAN I USE A CENTERFORCE DISC WITH MY BRAND X PRESSURE PLATE OR CENTERFORCE PRESSURE PLATE WITH MY BRAND X DISC? IT IS NOT RECOMMENDED TO USE CENTERFORCE COMPONENTS WITH OTHER MANUFACTURERS PRESSURE PLATES OR DISCS. CENTERFORCE PARTS ARE DESIGNED TO WORK AS MATCHED SETS AND TO GIVE SUPERIOR CLUTCH PERFORMANCE AS WELL AS RELIABLE OPERATION. WE CANNOT GUARANTY PARTS FROM OTHER MANUFACTURES.

ARE CENTERFORCE CLUTCHES REPAIRABLE OR REBUILDABLE? IN ORDER TO MAINTAIN PROPER CLUTCH SERVICE, IT IS NOT RECOMMENDED TO REBUILD PATENTED CENTERFORCE CLUTCHES. HOWEVER, REPAIR MAY BE POSSIBLE IN SOME CASES BY CENTERFORCE, AFTER INSPECTION OF THE ASSEMBLY. PLEASE CONTACT OUR TECHNICAL DEPARTMENT AT (928) 771-8422 FOR FURTHER INFORMATION.

DOES THE CENTERFORCE CLUTCH SYSTEM WEIGH LESS THAN THE STOCK O.E.M. CLUTCH I AM REPLACING? TYPICALLY, THE WEIGHT OF THE PATENTED CENTERFORCE CLUTCH ASSEMBLY WILL BE VERY SIMILAR TO THE WEIGHT OF A STOCK O.E.M. CLUTCH ASSEMBLY. IF ROTATING MASS (WEIGHT) IS A CONCERN, CENTERFORCE MANUFACTURES A LIGHT WEIGHT CLUTCH ASSEMBLY DESIGNED SPECIFICALLY FOR COMPETITION USE. AVAILABLE IN LIMITED APPLICATIONS THE CENTERFORCE LMC (LIGHT METAL CLUTCH) SERIES SAVES A CONSIDERABLE AMOUNT OF WEIGHT WHEN COMPARED TO CONVENTIONAL CLUTCH SYSTEMS. PLEASE NOTE, THESE LIGHT WEIGHT CLUTCHES ARE INTENDED FOR COMPETITION USE AND ARE NOT RECOMMENDED FOR STREET APPLICATIONS.

HOW IMPORTANT IS PROPER BELLHOUSING ALIGNMENT? BELLHOUSING ALIGNMENT IS CRUCIAL FOR PROPER CLUTCH FUNCTION AND RELIABILITY OF THE RELATED COMPONENTS. DUE TO MANUFACTURING TOLERANCES OF ENGINE BLOCKS AND BELLHOUSINGS, IT IS POSSIBLE FOR THE TRANSMISSION CENTERLINE AND CRANKSHAFT CENTERLINE TO BE MISALIGNED. THE RESULT OF THIS MISALIGNMENT MAY BE HARD SHIFTING, PILOT BEARING WEAR, TRANSMISSION MAIN SHAFT BEARING WEAR AND FAILURE OF THE CLUTCH DISC HUB. PLEASE REFER TO YOUR FACTORY SERVICE MANUAL OR CONTACT OUR TECHNICAL DEPARTMENT AT (928) 771-8422 FOR PROPER BELLHOUSING ALIGNMENT PROCEDURE.


MY ENGINE IS USED MAINLY AT LOW RPM’S; WILL THE CENTERFORCE CENTRIFUGAL WEIGHT SYSTEM BE BENEFICIAL FOR MY APPLICATION? THE ANSWER IS YES! WHILE IT IS TRUE THAT CENTRIFUGAL ASSIST IS A DIRECT FUNCTION OF RPM, THE PATENTED CENTERFORCE WEIGHT SYSTEM IS EFFECTIVE AND WILL ADD ADDITIONAL CLUTCH PERFORMANCE AT ALL ENGINE RPM LEVELS.

MY NEW THROWOUT BEARING APPEARS TO BE OFF CENTER ON THE BEARING RETAINER AND WOBBLES, IS IT DEFECTIVE? ALTHOUGH THIS MAY LOOK ABNORMAL, THIS BEARING MOVEMENT IS ONE OF ITS DESIGN FEATURES. CENTERFORCE STRIVES TO SUPPLY ONLY THE BEST QUALITY BEARINGS AVAILABLE, FOR MOST APPLICATIONS WE PREFER TO USE A SELF ALIGNING OR SELF CENTERING TYPE THROWOUT BEARING. THIS BEARING MAY APPEAR TO BE OFF CENTER OR IMPROPERLY MANUFACTURED, HOWEVER, REST ASSURED, THE BEARING WILL ALIGN AND CENTER ITSELF PROPERLY DURING NORMAL USAGE.

MY APPLICATION IS NOT LISTED IN THE CENTERFORCE CATALOG, WHAT SHOULD I DO? THE CENTERFORCE CATALOG IS ONE OF THE MOST EXTENSIVE AND COMPLETE AFTERMARKET PERFORMANCE CLUTCH PUBLICATIONS AVAILABLE. WE ARE CONTINUALLY MAKING CHANGES AND ADDING IN NEW APPLICATIONS. IF A PARTICULAR APPLICATION IS NOT FOUND IN THE CENTERFORCE CATALOG, PLEASE CONTACT OUR CENTERFORCE AT (928) 771-8422 FOR POSSIBLE NEW RELEASES OR ADDITIONS. ALSO, OUR RESEARCH AND DEVELOPMENT DEPARTMENT MAY BE ABLE TO CUSTOM BUILD/MODIFY YOUR SUPPLIED PARTS FOR OTHER SPECIAL APPLICATIONS NOT LISTED IN THE CENTERFORCE CATALOG. THIS SERVICE IS ESPECIALLY HELPFUL ON EXOTIC AND SPECIALTY TYPE VEHICLES. PLEASE FEEL FREE TO CONTACT OUR TECHNICAL DEPARTMENT AT (928) 771-8422 REGARDING THESE SPECIAL SERVICES.

MY NEW CENTERFORCE CLUTCH LOOKS DIFFERENT FROM ANY OTHER CLUTCH I’VE SEENSHOULD I REMOVE THE CENTERFORCE WEIGHTS FROM THE CLUTCH FINGERS? NO! THE PATENTED CENTERFORCE CLUTCH SYSTEM SHOULD NOT BE ALTERED OR TAMPERED WITH. THE CENTERFORCE CLUTCH IS DESIGNED TO BE A DIRECT PERFORMANCE REPLACEMENT CLUTCH SYSTEM, AND SHOULD NOT BE MODIFIED. THE CENTERFORCE WEIGHT SYSTEM IS ONE OF THE DESIGN FEATURES INCORPORATED INTO YOUR NEW CLUTCH. THE WEIGHTS ARE DESIGNED TO ADD CENTRIFUGAL ASSIST TO THE DIAPHRAGM CLUTCH SPRING AND INCREASE THE CLAMPING FORCE AS ENGINE RPM IS INCREASED. THE WEIGHTS SHOULD BE LEFT AS INSTALLED TO ASSURE PROPER CLUTCH PERFORMANCE.

WILL THE CENTERFORCE WEIGHT SYSTEM INTERFERE WITH MY THROWOUT BEARING? NO! THE PATENTED CENTERFORCE WEIGHTS ARE LIMITED TO TRAVEL, THEY WILL NOT INTERFERE WITH THE THROWOUT BEARING, OR MAKE NOISE DURING OPERATION.

MY NEW CENTERFORCE DID NOT COME WITH THE WEIGHTS ON THE CLUTCH DIAPHRAGM FINGERS, WAS IT BUILT IMPROPERLY? WE UTILIZE THE PATENTED CENTERFORCE WEIGHT SYSTEM ON ALL APPLICATIONS THAT ARE POSSIBLE. HOWEVER, IN SPACE LIMITED APPLICATIONS (MOST FRONT WHEEL DRIVE CARS), IT MAY NOT BE FEASIBLE TO USE THE CENTERFORCE WEIGHTS DUE TO CLEARANCE RESTRICTIONS IN THE BELLHOUSING. REST ASSURED, CENTERFORCE HAS MODIFIED THESE CLUTCH ASSEMBLIES TO INCREASE THE OVERALL HOLDING CAPACITY WITHOUT HAVING THE CENTRIFUGAL WEIGHT SYSTEM.

WHAT PARTS IN THE CLUTCH SYSTEM/LINKAGE SHOULD I INSPECT BEFORE INSTALLING A NEW CLUTCH? ALL RELATED CLUTCH PARTS SHOULD BE CHECKED FOR WEAR OR POSSIBLE PROBLEMS. THE CLUTCH LINKAGE STARTING FROM THE CLUTCH PEDAL BUSHINGS TO THE BELL CRANK (Z-BAR) TO THE CLUTCH FORK AND PIVOT BALL SHOULD BE INSPECTED FOR WEAR AND DAMAGE, ANY QUESTIONABLE PARTS SHOULD BE REPAIRED OR REPLACED. IF YOUR VEHICLE USES A HYDRAULIC LINKAGE SYSTEM, CHECK FOR ANY HYDRAULIC LEAKS AS WELL AS WEAR ON THE PUSH AND PULL RODS OPERATING THE HYDRAULICS AND ALL HOSES. HYDRAULIC SYSTEMS (ESPECIALLY ONES WITH HIGH MILEAGE) MAY HAVE INTERNAL LEAKAGE (PAST THE MASTER AND/OR SLAVE PISTON SEALS). KEEP IN MIND THESE ARE TOUGH TO DIAGNOSE BECAUSE THERE MAY NOT BE VISIBLE EXTERNAL LEAKAGE. IF YOUR VEHICLE IS CABLE EQUIPPED, THE CABLE SHOULD BE CHECKED FOR DAMAGE, STRETCH, EXCESSIVE RESISTANCE OR BINDING. IF FOUND TO BE DEFECTIVE THE CABLE MUST BE REPLACED. REFER TO YOUR VEHICLES SERVICE MANUAL FOR FACTORY SPECIFICATIONS. REGARDLESS OF YOUR VEHICLES LINKAGE TYPE, PAY PARTICULAR ATTENTION TO ANY SIGNS OF WEAR OR GALLING ON THE THROWOUT BEARING COLLAR.

REMEMBER IF YOU HAVE ANY QUESTIONS, PLEASE CALL OUR TECH. LINE (928) 771-8422 -WE WOULD LIKE TO HEAR FROM YOU-


WHAT COULD BE THE CAUSES FOR CLUTCH CHATTER? •

FLYWHEEL HAS EXCESSIVE RUN-OUT.

FLY WHEEL WAS NOT RESURFACED BEFORE THE NEW CLUTCH WAS INSTALLED.

FLYWHEEL WAS RESURFACED IMPROPERLY OR HAS IMPROPER SURFACE FINISH.

FLYWHEEL HAS SEVERE HARD SPOTS OR HOT SPOTS.

FLYWHEEL RESURFACED IMPROPERLY (I.E. INCORRECT FLYWHEEL STEP).

DAMAGED OR EXCESSIVELY WORN CV JOINTS.

BAD U-JOINTS IN DRIVE SHAFT OR U-JOINTS MISALIGNED.

EXCESSIVE BACKLASH IN DIFFERENTIAL.

EXCESSIVE DRIVELINE ANGLE.

BAD LEAF SPRINGS, BUSHINGS OR MOUNTS.

IMPROPER GEAR RATIO VERSUS TIRE DIAMETER.

DEFECTIVE PRESSURE PLATE AND/OR DISC.

DISC HAS INADEQUATE OR NO MARCEL (NOT ENOUGH CUSHION BETWEEN THE FRICTION FACINGS).

OIL OR GREASE CONTAMINATION ON CLUTCH FACINGS.

WORN OR DAMAGED CLUTCH LINKAGE.

BENT COVER ASSEMBLY AND/OR DISC.

IMPROPERLY TUNED ENGINE.

WORN OR DAMAGED ENGINE MOUNTS OR TRANSMISSION MOUNTS.

WHAT COULD BE THE CAUSE FOR IMPROPER CLUTCH RELEASE? •

CLUTCH LINKAGE NOT PROPERLY ADJUSTED OR RESET.

FLYWHEEL NOT SURFACED BEFORE NEW CLUTCH INSTALLED.

FLYWHEEL SURFACED IMPROPERLY (I.E. INCORRECT FLYWHEEL STEP).

FLYWHEEL MACHINED TOO THIN OR NOT MANUFACTURED TO STOCK (O.E.M.). SPECIFICATIONS.

LINKAGE WORN OR DAMAGED.

DEFECTIVE HYDRAULICS, LEAKING, BURNT FLUID, OR THERE MAY BE AIR IN THE SYSTEM.

CABLE STRETCHED OR DAMAGED.

IMPROPER CLUTCH FORK GEOMETRY DUE TO FLYWHEEL BEING TOO THIN OR BELLHOUSING DEEPER THAN STOCK (BELLHOUSING BALL STUD MAY NOT BE ADJUSTED PROPERLY).

PILOT BUSHING BINDING DUE TO IMPROPER BELLHOUSING ALIGNMENT, BELLHOUSING DAMAGED, OR LOOSE.

CLUTCH DISC INSTALLED IMPROPERLY.

CLUTCH DISC HUB RUBBING AGAINST FLYWHEEL BOLTS.

CLUTCH DISC BINDING ON INPUT SHAFT.

INPUT SHAFT BENT CAUSING CLUTCH DISC RUNOUT.

PRESSURE PLATE ASSEMBLY AND/OR CLUTCH DISC BENT OR DAMAGED.

CLUTCH DISC IS TOO THICK/ OR HAS EXCESSIVE MARCEL (TOO MUCH CUSHION BETWEEN THE FRICTION FACINGS).

PRESSURE PLATE HAS DEFECTIVE OR DAMAGED TORQUE DRIVE STRAPS.

DAMAGED, WORN, OR IMPROPERLY INSTALLED PILOT BUSHING/BEARING.

OIL OR GREASE CONTAMINATION ON CLUTCH FACINGS.

DAMAGED OR WORN THROWOUT BEARING COLLAR.

REMEMBER IF YOU HAVE ANY QUESTIONS, PLEASE CALL OUR TECH. LINE (928) 771-8422 -WE WOULD LIKE TO HEAR FROM YOU-


WHAT ARE THE POSSIBLE CAUSES FOR CLUTCH SLIPPAGE? •

IMPROPER CLUTCH ADJUSTMENT FREEPLAY.

QUADRANT NOT RESET PROPERLY OR IS FAULTY (ON RATCHET CABLE TYPE LINKAGE. SYSTEMS).

INCORRECT THROWOUT BEARING IS BEING USED (TOO LONG).

CLUTCH ASSEMBLY CONTAMINATED WITH GREASE/OIL.

CLUTCH NOT FULLY/PROPERLY SEATED IN.

FLYWHEEL NOT SURFACED AND DISC HAS BEEN GLAZED.

CLUTCH ASSEMBLY NOT DESIGNED FOR THE APPLICATION.

CLUTCH ASSEMBLY NOT DESIGNED FOR SPECIFIC TYPE OF USE (RACING/COMPETITION, ETC.).

CLUTCH NOT ADEQUATE FOR HORSEPOWER/TORQUE OF APPLICATION.

INCORRECT GEAR RATIO TO TIRE DIAMETER.

CLUTCH ASSEMBLY HAS LOST FACING MATERIAL FROM THE DISC.

CLUTCH ASSEMBLY HAS FAILED OR IS DEFECTIVE.

FLYWHEEL SURFACED IMPROPERLY (I.E. INCORRECT FLYWHEEL STEP).

DAMAGED OR WORN THROWOUT BEARING COLLAR.

DAMAGED OR BENT PRESSURE PLATE ASSEMBLY AND/OR DISC.

WHAT ARE THE CAUSES OF POOR SHIFTING QUALITY OR NOTCHY SHIFTING? •

IMPROPER CLUTCH RELEASE CAUSED BY FAULTY LINKAGE AND/OR IMPROPER ADJUSTMENT.

IMPROPERLY INSTALLED SHIFTER.

IMPROPERLY ADJUSTED SHIFTER OR SHIFT LINKAGE.

DAMAGED TRANSMISSION PARTS (BENT SHIFT FORK, ETC.).

WORN TRANSMISSION SYNCHRONIZER RINGS.

IMPROPER TRANSMISSION LUBRICANT (CHECK FACTORY SERVICE MANUAL FOR PROPER FLUID TYPE AND VISCOSITY).

PILOT BUSHING/BEARING BINDING ON INPUT SHAFT.

CLUTCH DISC HUB RUBBING FLYWHEEL OR FLYWHEEL BOLTS.

DAMAGED OR DEFECTIVE PRESSURE PLATE TORQUE STRAPS.

BELLHOUSING MISALIGNMENT

REMEMBER IF YOU HAVE ANY QUESTIONS, PLEASE CALL OUR TECH. LINE (928) 771-8422 -WE WOULD LIKE TO HEAR FROM YOU-


CENTERFORCE Year

Cyl

2011 CATALOG - DYAD MULTI-DISC CLUTCH SYSTEMS

Application

Counterbalance

Spline

CHEVROLET BEL AIR, BISCAYNE, IMPALA, CAPRICE 1955. - 1985. Clutch Kit 04714800 1955. - 1985. Clutch Kit 04614820 1955. - 1985. Clutch Kit 04614800 1955. - 1985. Clutch Kit 04714820

8 Cyl

ALL V8 ENG EXCEPT 400" WITH 2PCS REAR MAIN. 0 IN/OZ Tooth Count Ring Gear O.D. Kit Includes Pressure Plate, Discs, Floater, Flywheel, Bolts, Alignment Tool, Pilot Bearing 12.835" 153 8 Cyl ALL V8 ENG EXCEPT 400" WITH 2PCS REAR MAIN. 0 IN/OZ Tooth Count Ring Gear O.D. Kit Includes Pressure Plate, Discs, Floater, Flywheel, Bolts, Alignment Tool, Pilot Bearing 14.096" 168

1-1/8"-10

8 Cyl

1-1/8"-26

ALL V8 ENG EXCEPT 400" WITH 2PCS REAR MAIN. 0 IN/OZ Tooth Count Ring Gear O.D. Kit Includes Pressure Plate, Disc, T.O.B., Alignment Tool, Flywheel, Bolts, Pilot Bearing 12.835" 153 8 Cyl ALL V8 ENG EXCEPT 400" WITH 2PCS REAR MAIN. 0 IN/OZ Tooth Count Ring Gear O.D. Kit Includes Pressure Plate, Discs, Floater, Flywheel, Bolts, Alignment Tool 14.096" 168

1-1/8"-26

1-1/8"-10

CAMARO, Z-28 1967. - 1985. 8 Cyl ALL V8 ENG. EXCEPT 400" WITH 2PCS REAR MAIN. 0 IN/OZ Tooth Count Ring Gear O.D. Clutch Kit Kit Includes Pressure Plate, Discs, Floater, Flywheel, Bolts, Alignment Tool, Pilot Bearing 04714800 12.835" 153 1967. - 1985. 8 Cyl ALL V8 ENG. EXCEPT 400" WITH 2PCS REAR MAIN. 0 IN/OZ Tooth Count Ring Gear O.D. Clutch Kit Kit Includes Pressure Plate, Disc, T.O.B., Alignment Tool, Flywheel, Bolts, Pilot Bearing 04614800 12.835" 153 1967. - 1985. 8 Cyl ALL V8 ENG. EXCEPT 400" WITH 2PCS REAR MAIN. 0 IN/OZ Tooth Count Ring Gear O.D. Clutch Kit Kit Includes Pressure Plate, Discs, Floater, Flywheel, Bolts, Alignment Tool 04714820 14.096" 168 1967. - 1985. 8 Cyl ALL V8 ENG. EXCEPT 400" WITH 2PCS REAR MAIN. 0 IN/OZ Tooth Count Ring Gear O.D. Clutch Kit Kit Includes Pressure Plate, Discs, Floater, Flywheel, Bolts, Alignment Tool, Pilot Bearing 04614820 14.096" 168 1998. - 2002. 8 Cyl 5.7L 350" LS1 ENG. 0 IN/OZ Notes :O.E. CLUTCH DISC MAY BE 11-1/2" Tooth Count Ring Gear O.D. Clutch Kit Kit Includes Pressure Plate, Discs, Floater, Flywheel, Bolts, Alignment Tool, Pilot Bearing 04614842 14.096" 168 2010 - 2011

8 Cyl

6.2L ENG. LS3

0 IN/OZ

1-1/8"-10

1-1/8"-26

1-1/8"-10

1-1/8"-26

1-1/8"-26

1-1/8"-26

Notes :THIS APPLICATION REQUIRES CENTERFORCE FLYWHEEL - SEE FLYWHEEL SECTION Tooth Count Ring Gear O.D. Clutch Kit Kit Includes Pressure Plate, Discs, Floater, Flywheel, Bolts, Alignment Tool, Pilot Bearing 04614842 14.096" 168

CHEVY II, NOVA, NOVA SS, CONCOURS 1964. - 1979. 8 Cyl ALL V8 ENG. EXCEPT 400" WITH 2PCS REAR MAIN. 0 IN/OZ Notes :2PC REAR MAIN. 153 TOOTH Tooth Count Ring Gear O.D. Clutch Kit Kit Includes Pressure Plate, Discs, Floater, Flywheel, Bolts, Alignment Tool, Pilot Bearing 04714800 12.835" 153 1964. - 1979. 8 Cyl ALL V8 ENG. EXCEPT 400" WITH 2PCS REAR MAIN. 0 IN/OZ Notes :2PC REAR MAIN. 153 TOOTH Tooth Count Ring Gear O.D. Clutch Kit Kit Includes Pressure Plate, Disc, T.O.B., Alignment Tool, Flywheel, Bolts, Pilot Bearing 04614800 12.835" 153

1-1/8"-10

1964. - 1979. 8 Cyl ALL V8 ENG. EXCEPT 400" WITH 2PCS REAR MAIN. 0 IN/OZ Notes :2PC REAR MAIN. 168 TOOTH Tooth Count Ring Gear O.D. Clutch Kit Kit Includes Pressure Plate, Discs, Floater, Flywheel, Bolts, Alignment Tool 04714820 14.096" 168 1964. - 1979. 8 Cyl ALL V8 ENG. EXCEPT 400" WITH 2PCS REAR MAIN. 0 IN/OZ Notes :2PC REAR MAIN. 168 TOOTH Tooth Count Ring Gear O.D. Clutch Kit Kit Includes Pressure Plate, Discs, Floater, Flywheel, Bolts, Alignment Tool, Pilot Bearing 04614820 14.096" 168

1-1/8"-10

1-1/8"-26

1-1/8"-26

CORVETTE 1957. - 1985. Clutch Kit 04714800 1957. - 1985. Clutch Kit 04614800 1957. - 1985. Clutch Kit 04714820

8 Cyl

ALL V8 ENG. EXCEPT 400" WITH 2PCS REAR MAIN. 0 IN/OZ Tooth Count Ring Gear O.D. Kit Includes Pressure Plate, Discs, Floater, Flywheel, Bolts, Alignment Tool, Pilot Bearing 12.835" 153 8 Cyl ALL V8 ENG. EXCEPT 400" WITH 2PCS REAR MAIN. 0 IN/OZ Tooth Count Ring Gear O.D. Kit Includes Pressure Plate, Disc, T.O.B., Alignment Tool, Flywheel, Bolts, Pilot Bearing 12.835" 153

1-1/8"-10

8 Cyl

1-1/8"-10

ALL V8 ENG. EXCEPT 400" WITH 2PCS REAR MAIN. 0 IN/OZ Tooth Count Ring Gear O.D. Kit Includes Pressure Plate, Discs, Floater, Flywheel, Bolts, Alignment Tool 14.096" 168

1-1/8"-26

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

1

(928) 771-8322

(Fax)


CENTERFORCE Year

Cyl

2011 CATALOG - DYAD MULTI-DISC CLUTCH SYSTEMS

Application

Counterbalance

Spline

CHEVROLET CORVETTE 1957. - 1985. 8 Cyl ALL V8 ENG. EXCEPT 400" WITH 2PCS REAR MAIN. 0 IN/OZ Tooth Count Ring Gear O.D. Clutch Kit Kit Includes Pressure Plate, Discs, Floater, Flywheel, Bolts, Alignment Tool, Pilot Bearing 04614820 14.096" 168 1997. - 2004. 8 Cyl 5.7L 350" ENG. LS1 0 IN/OZ Notes :O.E. CLUTCH DISC MAY BE 11-1/2" Tooth Count Ring Gear O.D. Clutch Kit Kit Includes Pressure Plate, Discs, Floater, Flywheel, Bolts, Alignment Tool, Pilot Bearing 04614842 14.096" 168 1997. - 2004. 8 Cyl 5.7L 350" LS1 & LS6 ENG. 0 IN/OZ Notes :w/ HIGH BOOST FORCED INDUCTION AND/OR 175+ NITROUS O.E. CLUTCH DISC MAY BE 11-1/2" Tooth Count Ring Gear O.D. Clutch Kit Kit Includes Pressure Plate, Discs, Floater, Flywheel, Bolts, Alignment Tool, Pilot Bearing 04614842 14.096" 168 2001. - 2003. 8 Cyl 5.7L 350" ENG. LS6 0 IN/OZ Notes :O.E. CLUTCH DISC MAY BE 11-1/2" Tooth Count Ring Gear O.D. Clutch Kit Kit Includes Pressure Plate, Discs, Floater, Flywheel, Bolts, Alignment Tool, Pilot Bearing 04614842 14.096" 168

1-1/8"-26

2005. - 2007.

1-1/8"-26

8 Cyl

6.0L LS2 ENG w/OE SMF.

0 IN/OZ

1-1/8"-26

1-1/8"-26

1-1/8"-26

Notes :THIS APPLICATION REQUIRES CENTERFORCE FLYWHEEL - SEE FLYWHEEL SECTION Tooth Count Ring Gear O.D. Clutch Kit Kit Includes Pressure Plate, Discs, Floater, Flywheel, Bolts, Alignment Tool, Pilot Bearing 04614842 14.096" 168 2006. - 2010.

8 Cyl

7.0L LS7 ENG.

0 IN/OZ

1-1/8"-26

Notes :THIS APPLICATION REQUIRES CENTERFORCE FLYWHEEL - SEE FLYWHEEL SECTION Tooth Count Ring Gear O.D. Clutch Kit Kit Includes Pressure Plate, Discs, Floater, Flywheel, Bolts, Alignment Tool, Pilot Bearing 04614842 14.096" 168 2008. - 2010. 8 Cyl 6.2L LS3 ENG. w/OE SMF. 0 IN/OZ Notes :THIS APPLICATION REQUIRES CENTERFORCE FLYWHEEL - SEE FLYWHEEL SECTION Tooth Count Ring Gear O.D. Clutch Kit Kit Includes Pressure Plate, Discs, Floater, Flywheel, Bolts, Alignment Tool, Pilot Bearing 04614842 14.096" 168

1-1/8"-26

EL CAMINO, MONTE CARLO, CHEVELLE, MALIBU, MALIBU SS 1964. - 1981. Clutch Kit 04714800 1964. - 1981. Clutch Kit 04614800 1964. - 1981. Clutch Kit 04714820 1964. - 1981. Clutch Kit 04614820

8 Cyl

ALL V8 ENG. EXCEPT 400" WITH 2PCS REAR MAIN. 0 IN/OZ Tooth Count Ring Gear O.D. Kit Includes Pressure Plate, Discs, Floater, Flywheel, Bolts, Alignment Tool, Pilot Bearing 12.835" 153 8 Cyl ALL V8 ENG. EXCEPT 400" WITH 2PCS REAR MAIN. 0 IN/OZ Tooth Count Ring Gear O.D. Kit Includes Pressure Plate, Disc, T.O.B., Alignment Tool, Flywheel, Bolts, Pilot Bearing 12.835" 153

1-1/8"-10

8 Cyl

1-1/8"-10

ALL V8 ENG. EXCEPT 400" WITH 2PCS REAR MAIN. 0 IN/OZ Tooth Count Ring Gear O.D. Kit Includes Pressure Plate, Discs, Floater, Flywheel, Bolts, Alignment Tool 14.096" 168 8 Cyl ALL V8 ENG. EXCEPT 400" WITH 2PCS REAR MAIN. 0 IN/OZ Tooth Count Ring Gear O.D. Kit Includes Pressure Plate, Discs, Floater, Flywheel, Bolts, Alignment Tool, Pilot Bearing 14.096" 168

1-1/8"-26

1-1/8"-26

CHEVROLET - CRATE ENGINES CRATE ENGINES 8 Cyl

6.2L 376" & 7.4L 454" LSA & LSX, 8 BOLT CRANK

Notes :PUSH TYPE CLUTCH Tooth Count Clutch Kit 168 04614844

Ring Gear O.D. 14.096"

0 IN/OZ

1-1/8"-26

Kit Includes

CHEVROLET LIGHT TRUCK, SUV & VAN C, G, K, P, R, V, 10-30 SERIES, FULL SIZE BLAZER, SUBURBAN, SILVERADO, TAHOE 1962. - 1985. Clutch Kit 04714800 1962. - 1985. Clutch Kit 04614800 1962. - 1985. Clutch Kit 04714820 1962. - 1985. Clutch Kit 04614820

8 Cyl

ALL V8 ENG. EXCEPT 400" WITH 2PCS REAR MAIN 0 IN/OZ Tooth Count Ring Gear O.D. Kit Includes Pressure Plate, Discs, Floater, Flywheel, Bolts, Alignment Tool, Pilot Bearing 12.835" 153 8 Cyl ALL V8 ENG. EXCEPT 400" WITH 2PCS REAR MAIN 0 IN/OZ Tooth Count Ring Gear O.D. Kit Includes Pressure Plate, Disc, T.O.B., Alignment Tool, Flywheel, Bolts, Pilot Bearing 12.835" 153

1-1/8"-10

8 Cyl

1-1/8"-10

ALL V8 ENG. EXCEPT 400" WITH 2PCS REAR MAIN 0 IN/OZ Tooth Count Ring Gear O.D. Kit Includes Pressure Plate, Discs, Floater, Flywheel, Bolts, Alignment Tool 14.096" 168 8 Cyl ALL V8 ENG. EXCEPT 400" WITH 2PCS REAR MAIN 0 IN/OZ Tooth Count Ring Gear O.D. Kit Includes Pressure Plate, Discs, Floater, Flywheel, Bolts, Alignment Tool, Pilot Bearing 14.096" 168

1-1/8"-26

1-1/8"-26

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

2

(928) 771-8322

(Fax)


CENTERFORCE Year

Cyl

2011 CATALOG - DYAD MULTI-DISC CLUTCH SYSTEMS

Application

Counterbalance

Spline

DODGE DART, DIPLOMAT, DEMON, GTS, SUPER BEE, ASPEN, CHALLENGER, CHARGER, CORONET 1958. - 1992. 8 Cyl ALL V8 EXCEPT 8 BOLT HEMI. 0 IN/OZ Notes :143 TOOTH. 6 BOLT CRANK. Tooth Count Ring Gear O.D. Clutch Kit Kit Includes Pressure Plate, Discs, Floater, Flywheel, Bolts, Alignment Tool, Pilot Bearing 04613020 14.568" 143 1963. - 1969. 8 Cyl 7.0L 426" ENG. w/11" CLUTCH 0 IN/OZ Notes :143 TOOTH. 8 BOLT CRANK. Tooth Count Ring Gear O.D. Clutch Kit Kit Includes Pressure Plate, Discs, Floater, Flywheel, Bolts, Alignment Tool, Pilot Bearing 04753040 14.568" 143

1-1/8"-26

1-3/16-18

1963. - 1972. 8 Cyl ALL HEMI & WEDGE w/ 8 BOLT. 0 IN/OZ Notes :143 TOOTH. HEMI & WEDGE ENG w/8 BOLT CRANK. Tooth Count Ring Gear O.D. Clutch Kit Kit Includes Pressure Plate, Discs, Floater, Flywheel, Bolts, Alignment Tool, Pilot Bearing 04613040 14.568" 143

1-1/8"-26

1963. - 1972.

1-1/8"-26

8 Cyl

ALL HEMI & WEDGE w/ 8 BOLT.

0 IN/OZ

Notes :130 TOOTH. HEMI & WEDGE ENG w/8 BOLT CRANK. Tooth Count Ring Gear O.D. Clutch Kit Kit Includes Pressure Plate, Discs, Floater, Flywheel, Bolts, Alignment Tool, Pilot Bearing 04613018 1963. - 1972. 8 Cyl ALL HEMI & WEDGE w/ 8 BOLT. 0 IN/OZ Notes :130 TOOTH. HEMI & WEDGE ENG w/8 BOLT CRANK. Tooth Count Ring Gear O.D. Clutch Kit Kit Includes Pressure Plate, Discs, Floater, Flywheel, Bolts, Alignment Tool, Pilot Bearing 04693018 1963. - 1972.

8 Cyl

ALL HEMI & WEDGE w/ 8 BOLT.

0 IN/OZ

1"-23

1-3/16"-18

Notes :130 TOOTH. HEMI & WEDGE ENG w/8 BOLT CRANK. Tooth Count Ring Gear O.D. Clutch Kit Kit Includes Pressure Plate, Discs, Floater, Flywheel, Bolts, Alignment Tool, Pilot Bearing 04753018 1963. - 1972. 8 Cyl ALL HEMI & WEDGE w/ 8 BOLT. 0 IN/OZ Notes :143 TOOTH. HEMI & WEDGE ENG w/8 BOLT CRANK. Tooth Count Ring Gear O.D. Clutch Kit Kit Includes Pressure Plate, Discs, Floater, Flywheel, Bolts, Alignment Tool, Pilot Bearing 04693040 14.568" 143

1"-23

1964. - 1969.

1"-23

8 Cyl

6.3L 383" ENG. EXC H.D.

0 IN/OZ

Notes :130 TOOTH. ***41001 IS PILOT BUSHING*** Tooth Count Ring Gear O.D. Clutch Kit Kit Includes Pressure Plate, Discs, Floater, Flywheel, Bolts, Alignment Tool, Pilot Bearing 04693000 13.195" 130 1964. - 1969. 8 Cyl 6.3L 383" ENG. EXC H.D. 0 IN/OZ Notes :143 TOOTH. ***41001 IS PILOT BUSHING*** Tooth Count Ring Gear O.D. Clutch Kit Kit Includes Pressure Plate, Discs, Floater, Flywheel, Bolts, Alignment Tool, Pilot Bearing 04693020 14.568" 143 1964. - 1978. 8 Cyl 5.2L 318" ENG. 0 IN/OZ Notes :130 TOOTH Tooth Count Ring Gear O.D. Clutch Kit Kit Includes Pressure Plate, Discs, Floater, Flywheel, Bolts, Alignment Tool, Pilot Bearing 04693000 13.195" 130 1964. - 1978. 8 Cyl 5.2L 318" ENG. 0 IN/OZ Notes :143 TOOTH Tooth Count Ring Gear O.D. Clutch Kit Kit Includes Pressure Plate, Discs, Floater, Flywheel, Bolts, Alignment Tool, Pilot Bearing 04693020 14.568" 143 1964. - 1992. 8 Cyl ALL V8 EXCEPT 8 BOLT HEMI 0 IN/OZ Notes :130 TOOTH. ***41001 IS PILOT BUSHING*** Tooth Count Ring Gear O.D. Clutch Kit Kit Includes Pressure Plate, Discs, Floater, Flywheel, Bolts, Alignment Tool, Pilot Bearing 04613000 13.195" 130 1967. - 1969. 8 Cyl 7.2L 440" ENG. w/11" CLUTCH 0 IN/OZ Notes :6 BOLT CRANK. Tooth Count Ring Gear O.D. Clutch Kit Kit Includes Pressure Plate, Discs, Floater, Flywheel, Bolts, Alignment Tool, Pilot Bearing 04753020 14.568" 143 1967. - 1969.

8 Cyl

7.2L 440" ENG. w/11" CLUTCH

Notes :HEMI & WEDGE ENG w/8 BOLT CRANK. Tooth Count Ring Gear O.D. Clutch Kit 04753040 14.568" 143 1968. - 1972. 8 Cyl 5.6L 340" ENG. Notes :130 TOOTH. ***41001 IS PILOT BUSHING*** Tooth Count Ring Gear O.D. Clutch Kit 04693000 13.195" 130

0 IN/OZ

1"-23

1"-23

1"-23

1-1/8"-26

1-3/16"-18

1-3/16"-18

Kit Includes Pressure Plate, Discs, Floater, Flywheel, Bolts, Alignment Tool, Pilot Bearing 0 IN/OZ

1"-23

Kit Includes Pressure Plate, Discs, Floater, Flywheel, Bolts, Alignment Tool, Pilot Bearing

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

3

(928) 771-8322

(Fax)


CENTERFORCE Year

Cyl

2011 CATALOG - DYAD MULTI-DISC CLUTCH SYSTEMS

Application

Counterbalance

Spline

DODGE DART, DIPLOMAT, DEMON, GTS, SUPER BEE, ASPEN, CHALLENGER, CHARGER, CORONET 1968. - 1972. 8 Cyl 5.6L 340" ENG. 0 IN/OZ Notes :143 TOOTH. ***41001 IS PILOT BUSHING*** Tooth Count Ring Gear O.D. Clutch Kit Kit Includes Pressure Plate, Discs, Floater, Flywheel, Bolts, Alignment Tool, Pilot Bearing 04693020 14.568" 143 1969. 8 Cyl 6.3L 383" ENG. H.D. ONLY w/11" CLUTCH 0 IN/OZ Notes :143 TOOTH Tooth Count Ring Gear O.D. Clutch Kit Kit Includes Pressure Plate, Discs, Floater, Flywheel, Bolts, Alignment Tool, Pilot Bearing 04693020 14.568" 143

1"-23

1970. - 1971. 8 Cyl 7.0L 426" ENG. w/10.5" CLUTCH 0 IN/OZ Notes :143 TOOTH. HEMI & WEDGE ENG w/8 BOLT CRANK. 10.5" BOLT PATTERN Tooth Count Ring Gear O.D. Clutch Kit Kit Includes Pressure Plate, Discs, Floater, Flywheel, Bolts, Alignment Tool, Pilot Bearing 04753040 14.568" 143

1-3/16"-18

1970. - 1971.

1-3/16"-18

8 Cyl

7.0L 426" ENG. w/10.95" CLUTCH

0 IN/OZ

1"-23

Notes :143 TOOTH. HEMI & WEDGE ENG w/8 BOLT CRANK. 10.5" BOLT PATTERN Tooth Count Ring Gear O.D. Clutch Kit Kit Includes Pressure Plate, Discs, Floater, Flywheel, Bolts, Alignment Tool, Pilot Bearing 04753040 14.568" 143 1970. - 1972.

8 Cyl

7.2L 440" ENG. w/10.5" CLUTCH

0 IN/OZ

1-3/16"-18

Notes :130 TOOTH. 6 BOLT CRANK. 10.5" BOLT PATTERN Tooth Count Ring Gear O.D. Clutch Kit Kit Includes Pressure Plate, Discs, Floater, Flywheel, Bolts, Alignment Tool, Pilot Bearing 04753000 13.195" 130 1970. - 1972. 8 Cyl 7.2L 440" ENG. w/10.5" CLUTCH 0 IN/OZ Notes :143 TOOTH. 6 BOLT CRANK. 10.5" BOLT PATTERN Tooth Count Ring Gear O.D. Clutch Kit Kit Includes Pressure Plate, Discs, Floater, Flywheel, Bolts, Alignment Tool, Pilot Bearing 04753020 14.568" 143

1-3/16"-18

1970. - 1972.

1-3/16"-18

8 Cyl

7.2L 440" ENG. w/10.5" CLUTCH

0 IN/OZ

Notes :143 TOOTH. HEMI & WEDGE ENG w/8 BOLT CRANK. 10.5" BOLT PATTERN Tooth Count Ring Gear O.D. Clutch Kit Kit Includes Pressure Plate, Discs, Floater, Flywheel, Bolts, Alignment Tool, Pilot Bearing 04753040 14.568" 143 1970. - 1972.

8 Cyl

7.2L 440" ENG. w/10.95" CLUTCH

0 IN/OZ

1-3/16"-18

Notes :130 TOOTH. 6 BOLT CRANK. 10.5" BOLT PATTERN Tooth Count Ring Gear O.D. Clutch Kit Kit Includes Pressure Plate, Discs, Floater, Flywheel, Bolts, Alignment Tool, Pilot Bearing 04753000 13.195" 130 1970. - 1972. 8 Cyl 7.2L 440" ENG. w/10.95" CLUTCH 0 IN/OZ Notes :143 TOOTH. 6 BOLT CRANK. 10.5" BOLT PATTERN Tooth Count Ring Gear O.D. Clutch Kit Kit Includes Pressure Plate, Discs, Floater, Flywheel, Bolts, Alignment Tool, Pilot Bearing 04753020 14.568" 143

1-3/16"-18

1970. - 1972.

1-3/16"-18

8 Cyl

7.2L 440" ENG. w/10.95" CLUTCH

0 IN/OZ

Notes :143 TOOTH. HEMI & WEDGE ENG w/8 BOLT CRANK. 10.5" BOLT PATTERN Tooth Count Ring Gear O.D. Clutch Kit Kit Includes Pressure Plate, Discs, Floater, Flywheel, Bolts, Alignment Tool, Pilot Bearing 04753040 14.568" 143 1972. - 1974.

8 Cyl

6.6L 400" ENG.

Notes :130 TOOTH. ***41001 IS PILOT BUSHING*** Tooth Count Ring Gear O.D. Clutch Kit 04693000 13.195" 130

0 IN/OZ

1"-23

Kit Includes Pressure Plate, Discs, Floater, Flywheel, Bolts, Alignment Tool, Pilot Bearing

DODGE LIGHT TRUCK, SUV & VAN SERIES 100, 200, 300, RAMCHARGER & VAN 1966. - 1987. Notes :143 TOOTH. Clutch Kit 04693020 1969. - 1971. Notes :143 TOOTH. Clutch Kit 04693020 1974. - 1978. Notes :143 TOOTH. Clutch Kit 04693020 1977. - 1987. Notes :143 TOOTH. Clutch Kit 04693020

8 Cyl

5.2L 318" ENG.

0 IN/OZ

Tooth Count Ring Gear O.D. 14.568" 143 8 Cyl 6.3L 383" ENG.

Kit Includes Pressure Plate, Discs, Floater, Flywheel, Bolts, Alignment Tool, Pilot Bearing

Tooth Count Ring Gear O.D. 14.568" 143 8 Cyl 7.2L 440" ENG.

Kit Includes Pressure Plate, Discs, Floater, Flywheel, Bolts, Alignment Tool, Pilot Bearing

Tooth Count Ring Gear O.D. 14.568" 143 8 Cyl 5.2L 318" ENG.

Kit Includes Pressure Plate, Discs, Floater, Flywheel, Bolts, Alignment Tool, Pilot Bearing

Tooth Count 143

Ring Gear O.D. 14.568"

0 IN/OZ

0 IN/OZ

0 IN/OZ

1"-23

1"-23

1"-23

1"-23

Kit Includes Pressure Plate, Discs, Floater, Flywheel, Bolts, Alignment Tool, Pilot Bearing

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

4

(928) 771-8322

(Fax)


CENTERFORCE Year

Cyl

2011 CATALOG - DYAD MULTI-DISC CLUTCH SYSTEMS

Application

Counterbalance

Spline

0 IN/OZ

1"-23

DODGE LIGHT TRUCK, SUV & VAN SERIES 100, 200, 300, RAMCHARGER & VAN 1977. - 1987. Notes :130 TOOTH. Clutch Kit 04693000

8 Cyl

5.2L 318" ENG. Tooth Count 130

Ring Gear O.D. 13.195"

Kit Includes Pressure Plate, Discs, Floater, Flywheel, Bolts, Alignment Tool, Pilot Bearing

FORD FAIRLANE 1963. - 1967.

8 Cyl

4.7L 289" ENG. STD & H.D.

Notes :28 IN/OZ BAL. 157 TOOTH. O.E. CLUTCH DISC MAY BE 10-1/2" Tooth Count Ring Gear O.D. Clutch Kit Kit Includes 04215728 13.294" 157 1963. - 1970. 8 Cyl 4.7L 289" & 5.0L 302" ENG. STD & H.D. Notes :28 IN/OZ BAL. 157 TOOTH. O.E. CLUTCH DISC MAY BE 10-1/2" Tooth Count Ring Gear O.D. Clutch Kit Kit Includes 157 04115728 13.294" 1968. - 1970. 8 Cyl 5.0L 302" ENG. Notes :28 IN/OZ BAL. 157 TOOTH. O.E. CLUTCH DISC MAY BE 10-1/2" Tooth Count Ring Gear O.D. Clutch Kit Kit Includes 04215728 13.294" 157

28.0 IN/OZ

1-1/16"-10

28.0 IN/OZ

1-1/8"-26

28.0 IN/OZ

1-1/16"-10

28.0 IN/OZ

1-1/16"-10

28.0 IN/OZ

1-1/8"-26

28.0 IN/OZ

1-1/16"-10

28.0 IN/OZ

1-1/8"-26

28.0 IN/OZ

1-1/16"-10

28.0 IN/OZ

1-1/8"-26

28.0 IN/OZ

1-1/16"-10

28.0 IN/OZ

1-1/16"-10

28.0 IN/OZ

1-1/8"-26

28.0 IN/OZ

1-1/16"-10

FAIRMONT, MAVERICK 1973. - 1977.

8 Cyl

5.0L 302" ENG.

Notes :28 IN/OZ BAL. 157 TOOTH. O.E. CLUTCH DISC MAY BE 10-1/2" Tooth Count Ring Gear O.D. Clutch Kit 157 04215728 13.294" 1973. - 1977. 8 Cyl 5.0L 302" ENG. Notes :28 IN/OZ BAL. 157 TOOTH. O.E. CLUTCH DISC MAY BE 10-1/2" Tooth Count Ring Gear O.D. Clutch Kit 157 04115728 13.294" 1979. 8 Cyl 5.0L 302" ENG. Notes :28 IN/OZ BAL. 157 TOOTH. Tooth Count Ring Gear O.D. Clutch Kit 157 04215728 13.294" 1979. 8 Cyl 5.0L 302" ENG. Notes :28 IN/OZ BAL. 157 TOOTH. Clutch Kit Tooth Count Ring Gear O.D. 157 04115728 13.294"

Kit Includes

Kit Includes

Kit Includes

Kit Includes

FALCON 1965. - 1967.

8 Cyl

4.7L 289" ENG.

Notes :28 IN/OZ BAL. 157 TOOTH. O.E. CLUTCH DISC MAY BE 10-1/2" Tooth Count Ring Gear O.D. Clutch Kit 157 04215728 13.294" 1965. - 1970. 8 Cyl 4.7L 289" & 5.0L ENG. 4 BBL Notes :28 IN/OZ BAL. 157 TOOTH. O.E. CLUTCH DISC MAY BE 10-1/2" Tooth Count Ring Gear O.D. Clutch Kit 157 04115728 13.294" 1968. - 1970. 8 Cyl 5.0L 302" ENG. 4 BBL Notes :28 IN/OZ BAL. 157 TOOTH. O.E. CLUTCH DISC MAY BE 10-1/2" Clutch Kit Tooth Count Ring Gear O.D. 157 04215728 13.294"

Kit Includes

Kit Includes

Kit Includes

GALAXIE 1967.

8 Cyl

4.7L 289" ENG. 3 SPD.

Notes :28 IN/OZ BAL. 157 TOOTH. O.E. CLUTCH DISC MAY BE 10-1/2" Clutch Kit Kit Includes Tooth Count Ring Gear O.D. 157 04215728 13.294" 1967. - 1971. 8 Cyl 4.7L 289" ENG. 3 SPD. & 5.0L 302" ENG. Notes :28 IN/OZ BAL. 157 TOOTH. O.E. CLUTCH DISC MAY BE 10-1/2" Clutch Kit Kit Includes Tooth Count Ring Gear O.D. 157 04115728 13.294" 1968. - 1971. 8 Cyl 5.0L 302" ENG. Notes :28 IN/OZ BAL. 157 TOOTH. O.E. CLUTCH DISC MAY BE 10-1/2" Clutch Kit Kit Includes Tooth Count Ring Gear O.D. 157 04215728 13.294"

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

5

(928) 771-8322

(Fax)


CENTERFORCE Year

Cyl

2011 CATALOG - DYAD MULTI-DISC CLUTCH SYSTEMS

Application

Counterbalance

Spline

28.0 IN/OZ

1-1/16"-10

28.0 IN/OZ

1-1/8"-26

28.0 IN/OZ

1-1/16"-10

FORD GRANADA, LTD 1975. - 1979. 8 Cyl 5.0L 302" ENG. Notes :28 IN/OZ BAL. 157 TOOTH. O.E. CLUTCH DISC MAY BE 10-1/2" Clutch Kit Tooth Count Ring Gear O.D. 157 04215728 13.294" 1975. - 1979. 8 Cyl 5.0L 302" ENG. Notes :28 IN/OZ BAL. 157 TOOTH. O.E. CLUTCH DISC MAY BE 10-1/2" Clutch Kit Tooth Count Ring Gear O.D. 157 04115728 13.294"

Kit Includes

Kit Includes

MUSTANG, MUSTANG II, COBRA 1965. - 1967.

8 Cyl

4.7L 289" ENG. w/10" CLUTCH

Notes :28 IN/OZ BAL. 157 TOOTH. O.E. CLUTCH DISC MAY BE 10-1/2" Tooth Count Ring Gear O.D. Clutch Kit Kit Includes 04215728 13.294" 157 1965. - 1970 8 Cyl 4.7L 289" & 5.0L 302" ENG, INCLUDING BOSS ENG. 28.0 IN/OZ Notes :28 IN/OZ BAL. 157 TOOTH. O.E. CLUTCH DISC MAY BE 10-1/2" Tooth Count Ring Gear O.D. Clutch Kit Kit Includes 157 04115728 13.294" 1965. - 1973. 8 Cyl 4.7L 289", 5.0L 302" & 5.8L 351" ENG - SPECIAL APP 0 IN/OZ Notes :10.4" DIA CLUTCH UPGRAGE REQUIRES CENTERFORCE FLYW. SEE FLYW. SECTION Tooth Count Ring Gear O.D. Clutch Kit Kit Includes 157 04215700 13.294" 1965. - 1973. 8 Cyl 4.7L 289", 5.0L 302" & 5.8L 351" ENG - SPECIAL APP 0 IN/OZ Notes :10.4" CLUTCH UPGRAGE w/26 SPLINE AFTERMKT TRANS. REQUIRES CENTERFORCE FLYW. SEE FLYW. SECTION Clutch Kit Kit Includes Tooth Count Ring Gear O.D. 157 04115700 13.294" 1968. - 1973. 8 Cyl 5.0L 302" ENG. 28.0 IN/OZ Notes :28 IN/OZ BAL. 157 TOOTH. O.E. CLUTCH DISC MAY BE 10-1/2" Tooth Count Ring Gear O.D. Clutch Kit Kit Includes 157 04215728 13.294" 1969. - 1970 8 Cyl 5.0L 302" BOSS ENG. 28.0 IN/OZ Notes :28 IN/OZ BAL. 157 TOOTH. O.E. CLUTCH DISC MAY BE 10-1/2" Tooth Count Ring Gear O.D. Clutch Kit Kit Includes 157 04215728 13.294" 1979. - 1980. 8 Cyl 5.0L 302" ENG. 28.0 IN/OZ Notes :28 IN/OZ BAL. 157 TOOTH. Tooth Count Ring Gear O.D. Clutch Kit Kit Includes 157 04215728 13.294" 1979. - 1980. 8 Cyl 5.0L 302" ENG. 28.0 IN/OZ Notes :28 IN/OZ BAL. 157 TOOTH. Tooth Count Ring Gear O.D. Clutch Kit Kit Includes 157 04115728 13.294" 1996. - 2004 8 Cyl 4.6L 280" ENG. GT 0 IN/OZ Notes :8 BOLT CRANK Tooth Count Ring Gear O.D. Clutch Kit Kit Includes Pressure Plate, Discs, Floater, Flywheel, Bolts, Alignment Tool, Pilot Bearing 04214805 14.215" 164 1996. - 2004

8 Cyl

4.6L 280" ENG. GT

0 IN/OZ

Notes :6 BOLT CRANK Tooth Count Ring Gear O.D. Clutch Kit Kit Includes Pressure Plate, Discs, Floater, Flywheel, Bolts, Alignment Tool, Pilot Bearing 04214810 14.215" 164 2011 8 Cyl 5.0L 302" 32 VALVE w/6 SPD 0 IN/OZ Notes :DFX REQUIRES CENTERFORCE FLYWHEEL-SEE FLYWHEEL SECTION Tooth Count Ring Gear O.D. Clutch Kit Kit Includes Pressure Plate, Discs, Floater, Flywheel, Bolts, Alignment Tool, Pilot Bearing 04234805 14.215" 164

1-1/8"-26

1-1/16"-10

1-1/8"-26

1-1/16"-10

1-1/16"-10

1-1/16"-10

1-1/8"-26

1-1/16"-10

1-1/16"-10

1"-23

RANCHERO 1970. - 1973.

8 Cyl

5.0L 302" ENG. 3 SPD

Notes :28 IN/OZ BAL. 157 TOOTH. O.E. CLUTCH DISC MAY BE 10-1/2" Clutch Kit Tooth Count Ring Gear O.D. 157 04215728 13.294" 1970. - 1973. 8 Cyl 5.0L 302" ENG. 3 SPD Notes :28 IN/OZ BAL. 157 TOOTH. O.E. CLUTCH DISC MAY BE 10-1/2" Clutch Kit Tooth Count Ring Gear O.D. 157 04115728 13.294"

28.0 IN/OZ

1-1/16"-10

28.0 IN/OZ

1-1/8"-26

Kit Includes

Kit Includes

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

6

(928) 771-8322

(Fax)


CENTERFORCE Year

Cyl

2011 CATALOG - DYAD MULTI-DISC CLUTCH SYSTEMS

Application

Counterbalance

Spline

28.0 IN/OZ

1-1/16"-10

28.0 IN/OZ

1-1/8"-26

FORD TORINO 1969. - 1973. 8 Cyl 5.0L 302" ENG. Notes :28 IN/OZ BAL. 157 TOOTH. O.E. CLUTCH DISC MAY BE 10-1/2" Clutch Kit Tooth Count Ring Gear O.D. 157 04215728 13.294" 1969. - 1973. 8 Cyl 5.0L 302" ENG. Notes :28 IN/OZ BAL. 157 TOOTH. O.E. CLUTCH DISC MAY BE 10-1/2" Clutch Kit Tooth Count Ring Gear O.D. 157 04115728 13.294"

Kit Includes

Kit Includes

GMC CABALLERO,SPRINT 1971. - 1981. Clutch Kit 04714800 1971. - 1981. Clutch Kit 04614800 1971. - 1981. Clutch Kit 04714820 1971. - 1981. Clutch Kit 04614820

8 Cyl

ALL V8 ENG. EXCEPT 400" WITH 2PCS REAR MAIN. 0 IN/OZ Tooth Count Ring Gear O.D. Kit Includes Pressure Plate, Discs, Floater, Flywheel, Bolts, Alignment Tool, Pilot Bearing 12.835" 153 8 Cyl ALL V8 ENG. EXCEPT 400" WITH 2PCS REAR MAIN. 0 IN/OZ Tooth Count Ring Gear O.D. Kit Includes Pressure Plate, Disc, T.O.B., Alignment Tool, Flywheel, Bolts, Pilot Bearing 12.835" 153

1-1/8"-10

8 Cyl

1-1/8"-10

ALL V8 ENG. EXCEPT 400" WITH 2PCS REAR MAIN. 0 IN/OZ Tooth Count Ring Gear O.D. Kit Includes Pressure Plate, Discs, Floater, Flywheel, Bolts, Alignment Tool 14.096" 168 8 Cyl ALL V8 ENG. EXCEPT 400" WITH 2PCS REAR MAIN. 0 IN/OZ Tooth Count Ring Gear O.D. Kit Includes Pressure Plate, Discs, Floater, Flywheel, Bolts, Alignment Tool, Pilot Bearing 14.096" 168

1-1/8"-26

1-1/8"-26

GMC LIGHT TRUCK, SUV & VAN C, G, K, P, R, V, 1500-3500 SERIES, FULL SIZE JIMMY, SUBURBAN, SIERRA, YUKON 1962. - 1985. Clutch Kit 04714800 1962. - 1985. Clutch Kit 04614800 1962. - 1985. Clutch Kit 04714820 1962. - 1985. Clutch Kit 04614820

8 Cyl

ALL V8 ENG. EXCEPT 400" WITH 2PCS REAR MAIN. 0 IN/OZ Tooth Count Ring Gear O.D. Kit Includes Pressure Plate, Discs, Floater, Flywheel, Bolts, Alignment Tool, Pilot Bearing 12.835" 153 8 Cyl ALL V8 ENG. EXCEPT 400" WITH 2PCS REAR MAIN. 0 IN/OZ Tooth Count Ring Gear O.D. Kit Includes Pressure Plate, Disc, T.O.B., Alignment Tool, Flywheel, Bolts, Pilot Bearing 12.835" 153

1-1/8"-10

8 Cyl

1-1/8"-10

ALL V8 ENG. EXCEPT 400" WITH 2PCS REAR MAIN. 0 IN/OZ Tooth Count Ring Gear O.D. Kit Includes Pressure Plate, Discs, Floater, Flywheel, Bolts, Alignment Tool 14.096" 168 8 Cyl ALL V8 ENG. EXCEPT 400" WITH 2PCS REAR MAIN. 0 IN/OZ Tooth Count Ring Gear O.D. Kit Includes Pressure Plate, Discs, Floater, Flywheel, Bolts, Alignment Tool, Pilot Bearing 14.096" 168

1-1/8"-26

1-1/8"-26

PLYMOUTH GRAN FURY, GTX, ROADRUNNER, SATELLITE, BARRACUDA, BELVEDERE, DUSTER, FURY 1958. - 1992.

8 Cyl

ALL V8 EXCEPT 8 BOLT HEMI.

0 IN/OZ

Notes :143 TOOTH. 6 BOLT CRANK. Tooth Count Ring Gear O.D. Clutch Kit Kit Includes Pressure Plate, Discs, Floater, Flywheel, Bolts, Alignment Tool, Pilot Bearing 04613020 14.568" 143 1963. - 1972. 8 Cyl 7.0L 426" ENG. w/10-1/2" CLUTCH O IN/OZ Notes :***41001 IS PILOT BUSHING***, 143 TOOTH, 8 BOLT CRANK. Tooth Count Ring Gear O.D. Clutch Kit Kit Includes Pressure Plate, Discs, Floater, Flywheel, Bolts, Alignment Tool, Pilot Bearing 04693040 14.568" 143 1963. - 1972.

8 Cyl

ALL HEMI & WEDGE w/ 8 BOLT.

O IN/OZ

Notes :***41001 IS PILOT BUSHING***, 143 TOOTH, 8 BOLT CRANK. Tooth Count Ring Gear O.D. Clutch Kit Kit Includes Pressure Plate, Discs, Floater, Flywheel, Bolts, Alignment Tool, Pilot Bearing 04613040 14.568" 143 1963. - 1972. 8 Cyl ALL HEMI & WEDGE w/ 8 BOLT. 0 IN/OZ Notes :***41001 IS PILOT BUSHING***, 130 TOOTH, 8 BOLT CRANK. Tooth Count Ring Gear O.D. Clutch Kit Kit Includes Pressure Plate, Discs, Floater, Flywheel, Bolts, Alignment Tool, Pilot Bearing 04613018 1963. - 1972.

8 Cyl

ALL HEMI & WEDGE w/ 8 BOLT.

0 IN/OZ

Notes :***41001 IS PILOT BUSHING***, 130 TOOTH, 8 BOLT CRANK. Tooth Count Ring Gear O.D. Clutch Kit Kit Includes Pressure Plate, Discs, Floater, Flywheel, Bolts, Alignment Tool, Pilot Bearing 04693018 1963. - 1972. 8 Cyl ALL HEMI & WEDGE w/ 8 BOLT. 0 IN/OZ Notes :***41001 IS PILOT BUSHING***, 130 TOOTH, 8 BOLT CRANK. Tooth Count Ring Gear O.D. Clutch Kit Kit Includes Pressure Plate, Discs, Floater, Flywheel, Bolts, Alignment Tool, Pilot Bearing 04753018 -

1-1/8"-26

1"-23

1-1/8"-26

1-1/8"-26

1"-23

1-3/16-18

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

7

(928) 771-8322

(Fax)


CENTERFORCE Year

Cyl

2011 CATALOG - DYAD MULTI-DISC CLUTCH SYSTEMS

Application

Counterbalance

Spline

PLYMOUTH GRAN FURY, GTX, ROADRUNNER, SATELLITE, BARRACUDA, BELVEDERE, DUSTER, FURY 1963. - 1973. 8 Cyl 5.6L 340", 6.3L 383" ENG. w/10-1/2" CLUTCH 0 IN/OZ Notes :***41001 IS PILOT BUSHING***, 143 TOOTH, 6 BOLT CRANK. Tooth Count Ring Gear O.D. Clutch Kit Kit Includes Pressure Plate, Discs, Floater, Flywheel, Bolts, Alignment Tool, Pilot Bearing 04693020 14.568" 143

1"-23

1964. - 1973. 8 Cyl 5.6L 340", 6.3L 383" ENG. w/10-1/2" CLUTCH 0 IN/OZ Notes :***41001 IS PILOT BUSHING***, 130 TOOTH, 6 BOLT CRANK. Tooth Count Ring Gear O.D. Clutch Kit Kit Includes Pressure Plate, Discs, Floater, Flywheel, Bolts, Alignment Tool, Pilot Bearing 04693000 13.195" 130

1"-23

1964. - 1978. 8 Cyl 5.2L 318" ENG. 0 IN/OZ Notes :w/10-1/2" CLUTCH. 130 TOOTH. Tooth Count Ring Gear O.D. Clutch Kit Kit Includes Pressure Plate, Discs, Floater, Flywheel, Bolts, Alignment Tool, Pilot Bearing 04693000 13.195" 130 1964. - 1978. 8 Cyl 5.2L 318" ENG. 0 IN/OZ Notes :w/10-1/2" CLUTCH. 143 TOOTH. Tooth Count Ring Gear O.D. Clutch Kit Kit Includes Pressure Plate, Discs, Floater, Flywheel, Bolts, Alignment Tool, Pilot Bearing 04693020 14.568" 143 1964. - 1992. 8 Cyl ALL V8 EXCEPT 8 BOLT HEMI 0 IN/OZ Notes :130 TOOTH. 6 BOLT CRANK. Tooth Count Ring Gear O.D. Clutch Kit Kit Includes Pressure Plate, Discs, Floater, Flywheel, Bolts, Alignment Tool, Pilot Bearing 04613000 13.195" 130

1"-23

1968. - 1974.

8 Cyl

6.3L 383" ENG. w/11" CLUTCH

0 IN/OZ

1"-23

1-1/8"-26

1"-23

Notes :143 TOOTH. 6 BOLT CRANK. Tooth Count Ring Gear O.D. Clutch Kit Kit Includes Pressure Plate, Discs, Floater, Flywheel, Bolts, Alignment Tool, Pilot Bearing 04693020 14.568" 143 1970. - 1971. 8 Cyl 7.0L 426" ENG. w/10.5" CLUTCH 0 IN/OZ Notes :143 TOOTH. HEMI & WEDGE ENG w/8 BOLT CRANK. 10.5" BOLT PATTERN Tooth Count Ring Gear O.D. Clutch Kit Kit Includes Pressure Plate, Discs, Floater, Flywheel, Bolts, Alignment Tool, Pilot Bearing 04753040 14.568" 143

1-3/16-18

1970. - 1971.

1-3/16-18

8 Cyl

7.0L 426" ENG. w/10.95" CLUTCH

0 IN/OZ

Notes :143 TOOTH. HEMI & WEDGE ENG w/8 BOLT CRANK. 10.5" BOLT PATTERN Tooth Count Ring Gear O.D. Clutch Kit Kit Includes Pressure Plate, Discs, Floater, Flywheel, Bolts, Alignment Tool, Pilot Bearing 04753040 14.568" 143 1970. - 1972.

8 Cyl

7.2L 440" ENG. w/10.5" CLUTCH

0 IN/OZ

1-3/16-18

Notes :130 TOOTH. 6 BOLT CRANK. 10.5" BOLT PATTERN Tooth Count Ring Gear O.D. Clutch Kit Kit Includes Pressure Plate, Discs, Floater, Flywheel, Bolts, Alignment Tool, Pilot Bearing 04753000 13.195" 130 1970. - 1972. 8 Cyl 7.2L 440" ENG. w/10.5" CLUTCH 0 IN/OZ Notes :143 TOOTH. 6 BOLT CRANK. 10.5" BOLT PATTERN Tooth Count Ring Gear O.D. Clutch Kit Kit Includes Pressure Plate, Discs, Floater, Flywheel, Bolts, Alignment Tool, Pilot Bearing 04753020 14.568" 143

1-3/16-18

1970. - 1972.

1-3/16-18

8 Cyl

7.2L 440" ENG. w/10.5" CLUTCH

0 IN/OZ

Notes :143 TOOTH. HEMI & WEDGE ENG w/8 BOLT CRANK. 10.5" BOLT PATTERN Tooth Count Ring Gear O.D. Clutch Kit Kit Includes Pressure Plate, Discs, Floater, Flywheel, Bolts, Alignment Tool, Pilot Bearing 04753040 14.568" 143 1970. - 1972. 8 Cyl 7.2L 440" ENG. w/10.95" CLUTCH 0 IN/OZ Notes :130 TOOTH. 6 BOLT CRANK. 10.5" BOLT PATTERN Tooth Count Ring Gear O.D. Clutch Kit Kit Includes Pressure Plate, Discs, Floater, Flywheel, Bolts, Alignment Tool, Pilot Bearing 04753000 13.195" 130 1970. - 1972. 8 Cyl 7.2L 440" ENG. w/10.95" CLUTCH 0 IN/OZ Notes :143 TOOTH. 6 BOLT CRANK. 10.5" BOLT PATTERN Tooth Count Ring Gear O.D. Clutch Kit Kit Includes Pressure Plate, Discs, Floater, Flywheel, Bolts, Alignment Tool, Pilot Bearing 04753020 14.568" 143 1970. - 1972.

8 Cyl

7.2L 440" ENG. w/10.95" CLUTCH

0 IN/OZ

1-3/16-18

1-3/16-18

1-3/16-18

Notes :143 TOOTH. HEMI & WEDGE ENG w/8 BOLT CRANK. 10.5" BOLT PATTERN Tooth Count Ring Gear O.D. Clutch Kit Kit Includes Pressure Plate, Discs, Floater, Flywheel, Bolts, Alignment Tool, Pilot Bearing 04753040 14.568" 143

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

8

(928) 771-8322

(Fax)


CENTERFORCE Year

Cyl

2011 CATALOG - DYAD MULTI-DISC CLUTCH SYSTEMS

Application

Counterbalance

Spline

PLYMOUTH LIGHT TRUCK & VAN TRAILDUSTER 1974. - 1987. Clutch Kit 04693020 1977. - 1987. Clutch Kit 04693000 1977. - 1987. Clutch Kit 04693020

8 Cyl

5.2L 318" ENG. w/11" CLUTCH 0 IN/OZ Tooth Count Ring Gear O.D. Kit Includes Pressure Plate, Discs, Floater, Flywheel, Bolts, Alignment Tool, Pilot Bearing 14.568" 143 8 Cyl 5.2L 318" ENG. w/10-1/2" CLUTCH 0 IN/OZ Tooth Count Ring Gear O.D. Kit Includes Pressure Plate, Discs, Floater, Flywheel, Bolts, Alignment Tool, Pilot Bearing 13.195" 130

1"-23

8 Cyl

1"-23

5.2L 318" ENG. w/10-1/2" CLUTCH 0 IN/OZ Tooth Count Ring Gear O.D. Kit Includes Pressure Plate, Discs, Floater, Flywheel, Bolts, Alignment Tool, Pilot Bearing 14.568" 143

1"-23

PONTIAC FIREBIRD, TRANS AM 1998. - 2002.

8 Cyl

5.7L 350" ENG. LS1

Notes :O.E. CLUTCH DISC MAY BE 11-1/2" Tooth Count Clutch Kit 04614842 168

Ring Gear O.D. 14.096"

0 IN/OZ

1-1/8"-26

Kit Includes Pressure Plate, Discs, Floater, Flywheel, Bolts, Alignment Tool, Pilot Bearing

GTO 2004. - 2005.

8 Cyl

5.7L 350" ENG. LS1

Notes :O.E. CLUTCH DISC MAY BE 11-1/2" Tooth Count Clutch Kit 04614842 168

Ring Gear O.D. 14.096"

0 IN/OZ

1-1/8"-26

Kit Includes Pressure Plate, Discs, Floater, Flywheel, Bolts, Alignment Tool, Pilot Bearing

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

9

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Dual Friction DF Disc DF PP & Disc

Counterbalance T.O.B. Align Tool Pilot Bearing

ACURA CL

1997. - 1999. Pressure Plate : Disc : PP & Disc :

2.2L & 2.3L CL w/SOHC ENG. CF806908 *

DF908806

225

1.6L INTEGRA D16 ENG. CF340508 *

DF508340

*

11908806 23908806 01908806

*

-

* *

8-7/8 -

1-1/32"-24 700908 #20 Clutch Pattern

0 IN/OZ 817 50088 -

INTEGRA 1986. - 1989. Pressure Plate : Disc : PP & Disc : 1990. - 1991. Pressure Plate : Disc : PP & Disc : 1992. - 1993.

1.8L INTEGRA D18 ENG. CFT909807

CFT900800

7-7/8 -

220

*

DF909807

*

11909807 23909807 01909807

1.7L & 1.8L INTEGRA LS,GS-R

NOTE: INCLUDES VTEC Pressure Plate : Disc : PP & Disc : 1994. - 2001. Pressure Plate : Disc : PP & Disc :

200

* *

*

DF900800

1.8L INTEGRA LS, GS-R, RS, TYPE-R CFT900800 * DF900800

*

11900800 23008009 01900800

* *

-

*

*

-

* *

1"-24 #13 Clutch Pattern

8-5/8 -

220 11900800 23008009 01900800

# Clutch Pattern

8-5/8

220

7/8"-21 -

1-1/32"-24 700900 800900 #13 Clutch Pattern

8-5/8 -

1-1/32"-24 700900 800900 #13 Clutch Pattern

370 837 0 IN/OZ 837 50088 0 IN/OZ 817 50088 -

RSX 2002. - 2007. Pressure Plate : Disc : PP & Disc : 2002. - 2007. Pressure Plate : Disc : PP & Disc :

2.0L ENG. 5 SPD. CF822538 *

215 -

2.0L TYPE-S 6 SPD. -

DF538822

8-7/16 -

215 -

DF391200

-

*

1"-24 # Clutch Pattern

8-1/2 -

1"-24 # Clutch Pattern

INCLUDED INCLUDED INCLUDED INCLUDED INCLUDED INCLUDED

AMERICAN MOTORS AMX 8 CYLINDER 1968. - 1970. Pressure Plate : Disc : PP & Disc :

5.7L 343" & 5.9L 360" ENG. 4 BBL, 4 SPD. CF361739 CFT361739 383271 383271 DF383271 DF271739

11361739 23383271 01271739

10.4 LM361675 LM383271 LM271675

1969. - 1970. Pressure Plate : Disc : PP & Disc :

6.4L 390" ENG. 4 BBL, 4 SPD. CF361739 CFT361739 383271 383271 -

11361739 23383271 01271739

10.4 LM361675 LM383271 LM271675

1972. - 1974. Pressure Plate : Disc : PP & Disc :

6.6L 401" ENG. 4 BBL, 4 SPD. CF361739 CFT361739 383271 383271 -

DF383271 DF271739

11361739 23383271 01271739

10.4 LM361675 LM383271 LM271675

DF824878

-

DF383271 DF271739

1-1/8"-10 #2 Clutch Pattern

1-1/8"-10 #2 Clutch Pattern

1-1/8"-10 #2 Clutch Pattern

N1489 N1489 N1491 -

EAGLE, KAMMBACK, SX4 4 CYLINDER 1981. - 1983. Pressure Plate : Disc : PP & Disc :

2.5L 151" ENG. GM CF361878 383824 -

9-1/8

1983. - 1985. Pressure Plate : Disc : PP & Disc :

2.5L 150" ENG. AMC CF361900 384201 384201 -

-

-

# Clutch Pattern

9-1/8 DF201900

-

1-1/8"-10 -

-

1"-14 # Clutch Pattern

N1729 53010 53006 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

11

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Dual Friction DF Disc DF PP & Disc

Counterbalance T.O.B. Align Tool Pilot Bearing

AMERICAN MOTORS EAGLE, KAMMBACK, SX4 - Continued 6 CYLINDER

1981. - 1988. Pressure Plate : Disc : PP & Disc :

4.2L 258" ENG. FROM VIN # 011C04 CF361890 CFT361890 383271 383271 -

10.4 DF383271 DF193890

-

DF383271 DF271739

11361739 23383271 01271739

-

1-1/8"-10 # Clutch Pattern

N1439 53010 -

JAVELIN 8 CYLINDER 1968. - 1970. Pressure Plate : Disc : PP & Disc :

6.0L 390" ENG. 4 BBL, 4 SPD. CF361739 CFT361739 383271 383271 -

1970. - 1971. Pressure Plate : Disc : PP & Disc :

5.0L 304" ENG. CF360056 383271 -

1970. - 1974. Pressure Plate : Disc : PP & Disc :

5.9L 360" ENG. 4 BBL, 4 SPD. CF361739 CFT361739 383271 383271 -

1971. - 1974. Pressure Plate : Disc : PP & Disc :

6.6L 401" ENG. 3 SPD. CF361739 CFT361739 383271 383271 -

10.4 LM361675 LM383271 LM271675 10.4

CFT360056 383271 -

DF383271 DF271056

-

-

#2 Clutch Pattern

1-1/8"-10 # Clutch Pattern

11361739 23383271 01271739

10.4 LM361675 LM383271 LM271675

DF383271 DF271739

11361739 23383271 01271739

10.4 LM361675 LM383271 LM271675

DF824878

-

DF007006

*

-

*

-

DF383271 DF271739

1-1/8"-10 -

1-1/8"-10 #2 Clutch Pattern

1-1/8"-10 #2 Clutch Pattern

N1489 N1491 N1491 N1491 -

SPIRIT 4 CYLINDER 1980. - 1982. Pressure Plate : Disc : PP & Disc :

2.5L 151" ENG. CF361878 383824 -

9-1/8 -

-

1-1/8"-10 # Clutch Pattern

N1729 53010 -

AUDI 100, 100LS, 100 QUATTRO, WAGON 1992. - 1994. Pressure Plate : Disc : PP & Disc :

2.8L AAH ENG. -

240 -

9-7/16 -

15/16"-23 # Clutch Pattern

100 -

80, 80 QUATTRO, 90, 90 QUATTRO 1992. - 1995. Pressure Plate : Disc : PP & Disc :

2.8L AAH, AFC ENG. -

240 -

DF007006

9-7/16 -

15/16"-23 # Clutch Pattern

100 -

A4, A4 QUATTRO 1996. - 1998.

2.8L AFC ENG. DMF

NOTE: SOLID DISC HUB Pressure Plate : Disc : PP & Disc : 1996. - 2001.

-

DF227204

-

*

2.8L AHA ENG. 30V, DMF

NOTE: SOLID DISC HUB Pressure Plate : Disc : PP & Disc : 1996. - 2005.

240

-

240

DF228202

-

*

1.8L TURBO, DMF

NOTE: SOLID DISC HUB Pressure Plate : Disc : PP & Disc : -

9-7/16

# Clutch Pattern

9-7/16 -

230 -

DF205189

-

*

15/16"-23

15/16"-23 # Clutch Pattern

9 -

100 -

100 -

15/16"-23 # Clutch Pattern

100 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

12

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Dual Friction DF Disc DF PP & Disc

-

DF007006

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Counterbalance T.O.B. Align Tool Pilot Bearing

AUDI A6, A6 QUATTRO

1995. - 2003. Pressure Plate : Disc : PP & Disc :

2.8L AFC ENG. -

1997. - 1998.

240 -

*

2.8L AHA ENG. DMF

NOTE: SOLID DISC HUB Pressure Plate : Disc : PP & Disc : -

9-7/16 -

240 -

DF228202

-

*

15/16"-23 # Clutch Pattern

9-7/16 -

100 -

15/16"-23 # Clutch Pattern

100 -

S4 1992. - 1994.

2.2L AAN ENG. TURBO 20V 5 CYL. DMF

NOTE: SOLID DISC HUB Pressure Plate : Disc : PP & Disc : -

-

DF074006

240 -

*

9-7/16 -

15/16"-23 # Clutch Pattern

100 -

S 6, S 6 QUATTRO 1995. - 1997.

2.2L AAN ENG. 5 CYL. TURBO

NOTE: SOLID DISC HUB, DMF Pressure Plate : Disc : PP & Disc : -

-

240 DF074006

-

*

9-7/16 -

15/16"-23 # Clutch Pattern

100 -

TT 2000. - 2006.

1.8L ENG. TT COUPE w/5 SPD.

228

9

7/8"-28

NOTE: FROM CHASSIS # 8N1006001 CLUTCH UPGRADE - MUST USE 1989-91 228mm VW CORRADO G60 FLYW. Pressure Plate : Disc : PP & Disc : # Clutch Pattern DF038047 * 2002.

1.8L TURBO ENG. TT QUATRO w/5 SPD

228

NOTE: CLUTCH UPGRADE - MUST USE 1989-91 228mm VW CORRADO G60 FLYW. Pressure Plate : Disc : PP & Disc : DF038047 *

9 -

N8031 -

7/8"-28 # Clutch Pattern

N8031 -

BMW 2000, 2002 1969. - 1976. Pressure Plate : Disc : PP & Disc :

2.0L 2002 CF121018

-

DF018121

-

215

1.6L 316i CF121018

-

DF018121

-

1.8L E30 318i CF121018

-

DF018121

-

8-19/32 -

1-1/8"-10 # Clutch Pattern

50028 -

316 1975. - 1988. Pressure Plate : Disc : PP & Disc :

215

8-19/32 -

1-1/8"-10 # Clutch Pattern

1172 50028 -

318 1983. - 1985. Pressure Plate : Disc : PP & Disc : 1990. - 1998.

215

1.8 & 1.9L 318i, is M42 ENG I, TI, w/AC

NOTE: w/DMF, SOLID DISC HUB. Pressure Plate : Disc : PP & Disc : CF008010 *

8-19/32 -

215

-

DF010008

-

DF018121

-

*

1-1/8"-10 # Clutch Pattern

8-19/32 -

1172 50028 -

1-1/8"-10 # Clutch Pattern

1172 50028 -

320i 1975. - 1979. Pressure Plate : Disc : PP & Disc :

2.0L E21 320i CF121018

215 -

8-19/32 -

1-1/8"-10 # Clutch Pattern

1172 50028 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

13

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

CF II CF Disc CF II PP & Disc

Dual Friction DF Disc DF PP & Disc

-

DF018121

-

-

DF295121

-

Counterbalance T.O.B. Align Tool Pilot Bearing

BMW 320i - Continued

1980. - 1983. Pressure Plate : Disc : PP & Disc :

1.8L E21 320i CF121018

215

8-19/32 -

1-1/8"-10 # Clutch Pattern

1172 50028 -

325 1983. - 1987. Pressure Plate : Disc : PP & Disc : 1987. - 1989.

2.7L E30 325e, es -

228

2.7L E30 325e, es w/DMF

NOTE: SOLID DISC HUB Pressure Plate : Disc : PP & Disc : CF645649 1987. - 1993. Pressure Plate : Disc : PP & Disc : 1992. - 1995.

-

2.5L E30 325i, ic, ix CF058296

8-63/64 -

228 DF649645

-

-

DF296058

-

-

2.5L E36 325i, ic, is w/DMF

NOTE: SOLID DISC HUB Pressure Plate : Disc : PP & Disc : CF645649

-

-

DF206106

-

# Clutch Pattern

-

1-1/8"-10 # Clutch Pattern

8-63/64 -

1172 50028 -

1-1/8"-10 -

8-63/64

228 DF649645

# Clutch Pattern

8-63/64

228

1-1/8"-10 -

1172 50028 1172 50028 -

1-1/8"-10 # Clutch Pattern

1172 50028 -

328 1996. - 1999. Pressure Plate : Disc : PP & Disc :

2.8L E36 328i, ic, is w/DMF CF106206 *

240

*

9-7/16 -

1-1/8"-10 # Clutch Pattern

1172 50028 -

524 1982. - 1985. Pressure Plate : Disc : PP & Disc : 1986. - 1992.

2.4L E28 524TD -

228 -

DF295121

-

2.4L E28 524TD w/DMF

NOTE: SOLID DISC HUB Pressure Plate : Disc : PP & Disc : CF645649

8-63/64 -

228 -

DF649645

-

-

DF296058

-

1-1/8"-10 # Clutch Pattern

8-63/64 -

1172 50028 -

1-1/8"-10 # Clutch Pattern

1172 50028 -

525i 1988.02 - 1990. Pressure Plate : Disc : PP & Disc : 1991. - 1995.

2.5L E34 525i CF058296

228

2.5L E34 525i M50 TWIN CAM ENG. w/DMF

NOTE: SOLID DISC HUB Pressure Plate : Disc : PP & Disc : CF645649

8-63/64 -

228

-

DF649645

-

-

DF295121

-

1-1/8"-10 # Clutch Pattern

8-63/64 -

1172 50028 -

1-1/8"-10 # Clutch Pattern

1172 50028 -

528 1982.04 - 1986.04 Pressure Plate : Disc : PP & Disc : 1986.05 - 1988. Pressure Plate : Disc : PP & Disc :

2.7L E28 528e -

228

2.7L E28 528e w/DMF CF645649 -

8-63/64 -

228 DF649645

-

1-1/8"-10 # Clutch Pattern

8-63/64 -

1-1/8"-10 # Clutch Pattern

1172 50028 1172 50028 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

14

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Dual Friction DF Disc DF PP & Disc

Counterbalance T.O.B. Align Tool Pilot Bearing

BMW 528 - Continued

1997. - 1998. Pressure Plate : Disc : PP & Disc :

2.8L E39 528i w/DMF CF106206 *

240 -

DF206106

-

*

9-7/16 -

1-1/8"-10 # Clutch Pattern

1172 50028 -

540 1996.07 - 2003.

4.4L E39 540i, it w/DMF

NOTE: SOLID DISC HUB Pressure Plate : Disc : PP & Disc : -

240 -

DF144144

-

-

-

*

9-7/16 -

1-3/8"-10 # Clutch Pattern

-

M3 1987. - 1991. Pressure Plate : Disc : PP & Disc : 1995. - 1996.

2.3L E30 M3 CF774775 3.0L E36 M3 w/DMF

NOTE: SOLID DISC HUB Pressure Plate : Disc : PP & Disc : 1996. - 1999.

228 240 -

DF778106

-

3.2L E36

NOTE: SOLID DISC HUB w/DMF Pressure Plate : Disc : PP & Disc : -

8-63/64 -

-

DF778106

-

-

DF776772

-

*

# Clutch Pattern

9-7/16

240

1-1/8"-10 1-1/8"-10 # Clutch Pattern

9-7/16 -

1172 50028 -

1172 50028 -

1-1/8"-10 # Clutch Pattern

1172 50028 -

M5 1987. - 1988. Pressure Plate : Disc : PP & Disc :

3.5L E28 M5 -

240

1991. - 1993. Pressure Plate : Disc : PP & Disc :

3.6L E34 M5 CF772777

-

DF777772

-

3.5L E24 M6 -

-

DF776772

-

3.5L E24 M635 -

-

DF776772

-

-

9-7/16 -

240

1-1/8"-10 # Clutch Pattern

9-7/16 -

1-1/8"-10 # Clutch Pattern

1172 50028 1172 50028 -

M6 1987. - 1989. Pressure Plate : Disc : PP & Disc :

240

9-7/16 -

1-1/8"-10 # Clutch Pattern

1172 50028 -

M635 1988. - EOP. Pressure Plate : Disc : PP & Disc :

240

9-7/16 -

1-1/8"-10 # Clutch Pattern

1172 50028 -

Z3 1996. - 1998.

1.9L Z3 w/DMF

NOTE: SOLID DISC HUB Pressure Plate : Disc : PP & Disc : CF008010 * 1997. - 1998.

215 -

DF010008

-

*

2.8L Z3 w/DMF

NOTE: SOLID DISC HUB Pressure Plate : Disc : PP & Disc : CF106206 *

8-19/32 -

240 -

DF206106

-

*

1-1/8"-10 # Clutch Pattern

9-7/16 -

1172 50028 -

1-1/8"-10 # Clutch Pattern

1172 50028 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

15

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Dual Friction DF Disc DF PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Counterbalance T.O.B. Align Tool Pilot Bearing

BUICK APOLLO 6 CYLINDER

1973. - 1975. Pressure Plate : Disc : PP & Disc :

4.1L 250" ENG. 3 SPD. CF361874 CFT361874 383271 383271 -

10.4 DF383271 DF271874

-

-

1-1/8"-10 # Clutch Pattern

N1086 53010 -

CENTURY, REGAL, GS, SPECIAL, LaSABRE, ELECTRA, CENTURION, SKYLARK-TO 1977 6 CYLINDER 1964. - 1971. Pressure Plate : Disc : PP & Disc :

3.7L 225" & 4.1L 250" ENG. CF361874 CFT361874 383271 383271 -

10.4 DF383271 DF271874

-

-

DF383271 DF271874

-

-

1-1/8"-10 # Clutch Pattern

N1086 53010 -

8 CYLINDER 1964. - 1967. Pressure Plate : Disc : PP & Disc :

4.9L 300" ENG. CF361874 383271 -

10.4

1966. Pressure Plate : Disc : PP & Disc :

6.6L 401" ENG. CF165552 383735 -

1967. Pressure Plate : Disc : PP & Disc :

5.6L 340" ENG. CF361675 383271 -

1967. - 1970. Pressure Plate : Disc : PP & Disc :

6.6L 400" ENG. CF165552 383735 -

1968. - 1973. Pressure Plate : Disc : PP & Disc :

5.7L 350" ENG. 3 SPD. 10-1/2 " CLUTCH CF361675 CFT361675 383271 383271 DF383271 DF271675

1970. - 1971. Pressure Plate : Disc : PP & Disc :

7.5L 455" ENG. 4 SPD, CF165552 CFT165552 383735 383735 -

1971. - 1973. Pressure Plate : Disc : PP & Disc :

5.7L 350" ENG. 3 SPD. 11" UPGRADE CF165552 CFT165552 383735 383735 -

1971. - 1973. Pressure Plate : Disc : PP & Disc :

5.7L 350" ENG. 4 SPD CF361675 CFT361675 384161 384161 -

1971. - 1973. Pressure Plate : Disc : PP & Disc :

7.5L 455" ENG. 4 BBL, 4 SPD. CF165552 CFT165552 384148 384148 -

1971. - 1973.

7.5L 455" ENG. 4 BBL, 4 SPD.

CFT361874 383271 CFT165552 383735 CFT361675 383271 CFT165552 383735 -

NOTE: 12" HEAVY DUTY UPGRADE Pressure Plate : Disc : PP & Disc : 1976. Pressure Plate : Disc : PP & Disc :

4.3L 260" ENG. CF361874 383271 -

DF383735 DF735552 DF383271 DF271675 DF383735 DF735552

DF383735 DF735552 DF383735 DF735552 DF384161 DF161675 DF384148 DF148552

# Clutch Pattern

11165552 23383735 01735552 11361739 23383271 01271739

10.4 LM361675 LM383271 LM271675

11165552 23383735 01735552

11 LM165552 LM383735 LM735552

11361739 23383271 01271739

10.4 LM361675 LM383271 LM271675

11165552 23383735 01735552

11 LM165552 LM383735 LM735552

11165552 23383735 01735552

11 LM165552 LM383735 LM735552

11361739 23384161 01161739

10.4 LM361675 LM384161 LM161675

11165552 23384148 01148552

11 LM165552 LM384148 LM148552

#3 Clutch Pattern

31.2 IN/OZ N1716 53026 43001

12

1-1/8"-26

31.2 IN/OZ

DF382612 DF612909

-

-

DF383271 DF271874

-

1-1/8"-10 -

N1086 53010 -

11 LM165552 LM383735 LM735552

# Clutch Pattern

1-1/8"-10 # Clutch Pattern

1-1/8"-10 700030 #3 Clutch Pattern

1-1/8"-10 # Clutch Pattern

1-1/8"-10 700030 #3 Clutch Pattern

1-1/8"-10 # Clutch Pattern

1-1/8"-26 # Clutch Pattern

1-1/8"-26 700030 -

700030 #3 Clutch Pattern

10.4 CFT361874 383271 -

1-1/8"-10 -

-

1-1/8"-10 # Clutch Pattern

N1716 53010 43001 N1716 53010 43001 31.2 IN/OZ N1716 53010 43001 N1716 53010 43001 31.2 IN/OZ N1716 53010 43001 N1716 53010 43001 N1716 53026 43001

N1716 53026 43001 N1178 53010 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

16

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Dual Friction DF Disc DF PP & Disc

Counterbalance T.O.B. Align Tool Pilot Bearing

BUICK CENTURY, REGAL, SOMMERSET (1975 - 1989) 4 CYLINDER

1985. - 1989. Pressure Plate : Disc : PP & Disc :

2.5L 151" ENG. 5 SPD CF361910 * 384204 -

8-1/2 DF204910

*

-

-

-

-

1"-14 # Clutch Pattern

N1744 53014 -

6 CYLINDER 1975. - 1976. Pressure Plate : Disc : PP & Disc :

3.8L 231" ENG. CF361874 383271 -

NEW! 1977. Pressure Plate : Disc : PP & Disc :

3.8L 231" ENG. CF361874 383271 -

1978.

10.4 CFT361874 383271 -

DF383271 DF271874 DF383271 DF271874

-

-

3.2L 196," & 3.8L 231" ENG.

10.4

NOTE: NOTE; FLYWHEEL AVAILABLE FOR 3.8L ENG. ONLY - SEE FLYWHEEL SECTION. Pressure Plate : CF361874 CFT361874 Disc : 383271 383271 DF383271 PP & Disc : DF271874 1979.

-

2.8L 171" ENG. MS361914 *

LM361675 LM383271 LM271675

DF201914

1983. - 1986. Pressure Plate : Disc : PP & Disc :

2.0L 122" ENG. 5 SPD CF361910 * 384204 -

DF204910

1987. Pressure Plate : Disc : PP & Disc :

2.0L 122" ENG. 4 SPD. OHV 1 ENG. MS361914 *

*

11201914 23201914 01201914

*

-

* *

#2 Clutch Pattern

1-1/8"-10

34.4 IN/OZ

1-1/8"-10 700010 #2 Clutch Pattern

9-1/8 -

N1086 53010 34.4 IN/OZ N1086 53010 -

#2 Clutch Pattern

10.4

-

1-1/8"-10 700010 -

700010 -

3.2L 196," & 3.8L 231" ENG.

NOTE: NOTE; FLYWHEEL AVAILABLE FOR 3.8L ENG. ONLY - SEE FLYWHEEL SECTION Pressure Plate : CF361675 CFT361675 11361739 Disc : 383271 383271 DF383271 23383271 PP & Disc : DF271675 01271739 1988. - 1989. Pressure Plate : Disc : PP & Disc :

#2 Clutch Pattern

10.4 CFT361874 383271 -

1-1/8"-10 -

1"-14 # Clutch Pattern

N1086 53010 34.4 IN/OZ N1716 53010 43001 N1747 53014 -

SKYHAWK 4 CYLINDER 8-1/2 -

# Clutch Pattern

9-1/8 DF201914

*

*

11201914 23201914 01201914

*

*

11201914 23201914 01201914

*

1"-14 -

-

1"-14 # Clutch Pattern

N1744 53014 N1725 53014 -

SKYLARK (1978-1985) 4 CYLINDER 1980. - 1985. Pressure Plate : Disc : PP & Disc :

2.5L 151" ENG. X-BODY MS361914 *

9-1/8 DF201914

*

-

1"-14 # Clutch Pattern

N1725 53014 -

6 CYLINDER 1978. - 1979. Pressure Plate : Disc : PP & Disc :

3.8L 231" ENG. 3 SPD CF361874 CFT361874 383271 383271 -

1978. - 1979. Pressure Plate : Disc : PP & Disc :

3.8L 231" ENG. 4 SPD CF361675 CFT361675 383271 383271 -

1980. - 1985. Pressure Plate : Disc : PP & Disc :

2.8L 171" ENG. MS361914 *

10.4 DF383271 DF271874

-

DF383271 DF271675

-

#2 Clutch Pattern

10.4 LM361675 LM383271 LM271675

11361739 23383271 01271739

9-1/8 -

DF201914

*

11201914 23201914 01201914

* *

1-1/8"-10 700010 -

-

1-1/8"-10 700010 #2 Clutch Pattern

1"-14 # Clutch Pattern

34.4 IN/OZ N1086 53010 34.4 IN/OZ N1716 53010 43001 N1725 53014 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

17

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Dual Friction DF Disc DF PP & Disc

-

DF204910

-

DF201914

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Counterbalance T.O.B. Align Tool Pilot Bearing

CADILLAC CIMARRON 4 CYLINDER

1983. - 1986. Pressure Plate : Disc : PP & Disc :

2.0L 122" ENG. CF361910 * 384204 -

8-1/2

*

-

*

11201914 23201914 01201914

-

1"-14 # Clutch Pattern

N1744 53014 -

6 CYLINDER 1985. - 1988. Pressure Plate : Disc : PP & Disc :

2.8L 171" ENG. MS361914 *

9-1/8 -

* *

1"-14 # Clutch Pattern

N1725 53014 -

1-1/8"- 26

0 IN/OZ

CTS-V 8 CYLINDER 2004 - 2007

5.7L LS6 & 6.0L LS2 REPLACES OE DMF.

12

NOTE: THIS APPLICATION REQUIRES CENTERFORCE FLYWHEEL - SEE FLYWHEEL SECTION Pressure Plate : Disc : DF382612 PP & Disc : DF612010 -

-

NOTE: THIS APPLICATION INCLUDES CENTERFORCE FLYWHEEL Pressure Plate : Disc : DF382612 PP & Disc : DF612142

-

-

900143 #14 Clutch Pattern

INCLUDED #14 Clutch Pattern

53026 43003 INCLUDED INCLUDED INCLUDED

CHEVROLET BEL AIR, BISCAYNE, IMPALA, CAPRICE 8 CYLINDER 1955. - 1956.

4.3L 265" ENG.

10.4

NOTE: 2PC REAR MAIN. 153 TOOTH Pressure Plate : CF361675 CFT361675 Disc : 383271 383271 PP & Disc : 1955. - 1956.

DF383271 DF271675

11361739 23383271 01271739

LM361675 LM383271 LM271675

4.3L 265" ENG. DF383735 DF735473

-

-

DF383271 DF271675

11361739 23383271 01271739

LM361675 LM383271 LM271675

NOTE: 2PC REAR MAIN. 168 TOOTH Pressure Plate : CF361675 CFT361675 Disc : 383271 383271 PP & Disc : -

DF383271 DF271675

11361739 23383271 01271739

LM361675 LM383271 LM271675

4.6L 283" ENG. DF383735 DF735473

-

1-1/8"-10

0 IN/OZ

#3 Clutch Pattern

N1086 53010 -

1-1/8"-10

0 IN/OZ

#2 Clutch Pattern

700120 900120

-

4.6L 283" ENG. HD OPTION

#2 Clutch Pattern

700110 -

11

NOTE: 2PC REAR MAIN. 168 TOOTH Pressure Plate : CF165473 CFT165473 Disc : 383735 383735 PP & Disc : 1957. - 1967.

10.4

NOTE: 2PC REAR MAIN. 153 TOOTH Pressure Plate : CF361739 CFT361739 Disc : 383271 383271 PP & Disc : -

DF383271 DF271739

11361739 23383271 01271739

LM361675 LM383271 LM271675

NOTE: 2PC REAR MAIN. 168 TOOTH Pressure Plate : CF361739 CFT361739 Disc : 383271 383271 PP & Disc : -

DF383271 DF271739

11361739 23383271 01271739

LM361675 LM383271 LM271675

N1716 53010 -

#2 Clutch Pattern

N1716 53010 -

1-1/8"-10

0 IN/OZ

700120 900120 10.4

0 IN/OZ N1716 53010 -

700120 900120

NEW! 1955. - 1956. 4.3L 265" ENG. NOTE: 2PC REAR MAIN. HEAVY FLYWHEEL Pressure Plate : CF361675 CFT361675 Disc : 383271 383271 PP & Disc : -

1957. - 1958.

700100 900100

11

NOTE: 2PC REAR MAIN. 168 TOOTH Pressure Plate : CF165473 CFT165473 Disc : 383735 383735 PP & Disc : -

1-1/8"-10

#3 Clutch Pattern

N1086 53010 -

1-1/8"-10

0 IN/OZ

700100 900100 #2 Clutch Pattern

700120 900120 #2 Clutch Pattern

N1716 53010 N1716 53010 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

18

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Dual Friction DF Disc DF PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Counterbalance T.O.B. Align Tool Pilot Bearing

CHEVROLET BEL AIR, BISCAYNE, IMPALA, CAPRICE - Continued 8 CYLINDER 1962. - 1964.

6.7L 409" ENG.

10.4

NOTE: 2PC REAR MAIN. 153 TOOTH Pressure Plate : CF361739 CFT361739 Disc : 383271 383271 PP & Disc : -

DF383271 DF271739

11361739 23383271 01271739

LM361675 LM383271 LM271675

NOTE: 2PC REAR MAIN. 168 TOOTH Pressure Plate : CF361739 CFT361739 Disc : 383271 383271 PP & Disc : -

DF383271 DF271739

11361739 23383271 01271739

LM361675 LM383271 LM271675

1962. - 1969.

5.4L 327" ENG. DF383271 DF271675

11361739 23383271 01271739

LM361675 LM383271 LM271675

NOTE: 2PC REAR MAIN. 168 TOOTH Pressure Plate : CF361675 CFT361675 Disc : 383271 383271 PP & Disc : -

DF383271 DF271675

11361739 23383271 01271739

LM361675 LM383271 LM271675

1966. - 1969.

6.6L 396" ENG. 11165552 23383735 01735552

DF383735 DF735552

11165552 23383735 01735552

DF383735 DF735552

11165552 23383735 01735552

11165552 23383735 01735552

5.7L 350" ENG. DF383271 DF271739

11361739 23383271 01271739

LM361675 LM383271 LM271675

NOTE: 2PC REAR MAIN. 168 TOOTH Pressure Plate : CF361739 CFT361739 Disc : 383271 383271 PP & Disc : -

DF383271 DF271739

11361739 23383271 01271739

LM361675 LM383271 LM271675

1971.

5.7L 350" ENG. 4 SPD. MUNCIE TRANS.

NOTE: 2PC REAR MAIN. 168 TOOTH Pressure Plate : CF165552 CFT165552 Disc : 384148 384148 PP & Disc : 1971.

DF384148 DF148552

-

1-1/8"-10

0 IN/OZ

#3 Clutch Pattern

N1716 53010 43001

1-1/8"-10

0 IN/OZ

#3 Clutch Pattern

N1716 53010 43001

1-1/8"-10

0 IN/OZ

#3 Clutch Pattern

N1716 53010 43001

1-1/8"-10

0 IN/OZ

700120 900120

-

N1716 53010 -

#2 Clutch Pattern

N1716 53010 -

1-1/8"-26

0 IN/OZ

700120 900120

12

NOTE: 2PC REAR MAIN. 168 TOOTH. 12" HEAVY DUTY UPGRADE Pressure Plate : Disc : DF382612 PP & Disc : DF612909

#3 Clutch Pattern

N1716 53010 43001

#2 Clutch Pattern

LM165552 LM384148 LM148552

5.7L 350" ENG. 4 SPD. MUNCIE TRANS.

0 IN/OZ

700100 900100

11 11165552 23384148 01148552

1-1/8"-10

700120 900120

10.4

NOTE: 2PC REAR MAIN. 153 TOOTH Pressure Plate : CF361739 CFT361739 Disc : 383271 383271 PP & Disc : -

#2 Clutch Pattern

700120 900120

LM165552 LM383735 LM735552

N1716 53010 43001 N1716 53010 43001

700120 900120

11 DF383735 DF735552

0 IN/OZ

700120 900120

LM165552 LM383735 LM735552

5.7L 350" ENG.

1-1/8"-10

700120 900120

11

N1716 53010 -

#2 Clutch Pattern

#2 Clutch Pattern

LM165552 LM383735 LM735552

0 IN/OZ

N1716 53010 -

700100 900100

LM165552 LM383735 LM735552

5.4L 327" ENG.

NOTE: 2PC REAR MAIN. 168 TOOTH Pressure Plate : CF165552 CFT165552 Disc : 383735 383735 PP & Disc : 1969. - 1971.

700120 900120

11

NOTE: 2PC REAR MAIN. 168 TOOTH Pressure Plate : CF165552 CFT165552 Disc : 383735 383735 PP & Disc : 1968. - 1972.

DF383735 DF735552

7.0L 427" ENG.

NOTE: 2PC REAR MAIN. 168 TOOTH Pressure Plate : CF165552 CFT165552 Disc : 383735 383735 PP & Disc : 1967. - 1969.

#2 Clutch Pattern

11

NOTE: 2PC REAR MAIN. 168 TOOTH Pressure Plate : CF165552 CFT165552 Disc : 383735 383735 PP & Disc : 1966. - 1969.

700100 900100

10.4

NOTE: 2PC REAR MAIN. 153 TOOTH Pressure Plate : CF361675 CFT361675 Disc : 383271 383271 PP & Disc : -

1-1/8"-10

#3 Clutch Pattern

N1716 53026 43001

1-1/8"-26

0 IN/OZ

700120 900561 #3 Clutch Pattern

N1716 53026 43001

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

19

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Dual Friction DF Disc DF PP & Disc

Counterbalance T.O.B. Align Tool Pilot Bearing

CHEVROLET CAMARO, Z-28 4 CYLINDER

1982. - 1984. Pressure Plate : Disc : PP & Disc :

2.5L 151" ENG. 4 SPD CF361902 CFT361902 383824 383824 -

1983. - 1986. Pressure Plate : Disc : PP & Disc :

2.5L 151" ENG. 5 SPD. CF361902 CFT361902 384201 384201 -

9-1/8 DF198902

-

-

# Clutch Pattern

9-1/8 DF201902

-

-

DF383271 DF271874

-

-

1-1/8"-10 1"-14 # Clutch Pattern

N1716 53010 N1716 53006 -

6 CYLINDER 1967. - 1969. Pressure Plate : Disc : PP & Disc :

3.8L 230" ENG.3 SPD 2 BBL CF361874 CFT361874 383271 383271 -

10.4

1967. - 1978. Pressure Plate : Disc : PP & Disc :

4.1L 250" ENG. CF361874 383271 -

1977. Pressure Plate : Disc : PP & Disc :

3.8L 231" ENG.3 SPD 2 BBL CF361874 CFT361874 383271 383271 -

1979. Pressure Plate : Disc : PP & Disc :

4.1L 250" ENG. CF361874 383271 -

1980. - 1981. Pressure Plate : Disc : PP & Disc :

3.8L 229" ENG. CF361675 383271 -

1980. - 1981. Pressure Plate : Disc : PP & Disc :

3.8L 231" ENG. CF361675 383271 -

1982. - 1983. Pressure Plate : Disc : PP & Disc :

2.8L 173" ENG. 4 SPD CF361900 383824 -

1983. - 1984. Pressure Plate : Disc : PP & Disc :

2.8L 171" & 173" ENG. 5 SPD CF361900 384201 -

DF201900

-

-

1985. - 1989. Pressure Plate : Disc : PP & Disc :

2.8L 171" ENG. 5 SPD CF361902 CFT361902 384201 384201 -

DF201902

-

-

1990. - 1992. Pressure Plate : Disc : PP & Disc :

3.1L 189" ENG. 5 SPD CF360102 381068 -

1993. - 1995. Pressure Plate : Disc : PP & Disc :

3.4L 207" ENG. CF361965 381504 -

1996. - 2002. Pressure Plate : Disc : PP & Disc :

3.8L 231" ENG. CF360076 * 381504 -

#2 Clutch Pattern

10.4 CFT361874 383271 -

DF383271 DF271874

-

-

-

-

CFT361675 383271 CFT361675 383271 -

DF383271 DF271874

-

DF383271 DF271675 DF383271 DF271675

-

11361739 23383271 01271739 11361739 23383271 01271739

10.4 LM361675 LM383271 LM271675 9-1/8

-

-

DF504965

-

-

DF504076

-

*

#2 Clutch Pattern

1-1/8"-10 1"-14 1"-14 1"-14 # Clutch Pattern

-

1-1/8"-26 # Clutch Pattern

9-11/16 -

1-1/8"-10 -

# Clutch Pattern

9-1/8

9-11/16 -

# Clutch Pattern

# Clutch Pattern

9-1/8

-

1-1/8"-10 -

# Clutch Pattern

9-1/8

DF201902

1-1/8"-10 # Clutch Pattern

10.4 LM361675 LM383271 LM271675

DF198893

1-1/8"-10 #2 Clutch Pattern

10.4 CFT361874 383271 -

1-1/8"-10 # Clutch Pattern

10.4 DF383271 DF271874

1-1/8"-10 -

-

1-1/8"-26 # Clutch Pattern

N1086 53010 N1086 53010 N1086 53010 N1086 53010 N1716 53010 43001 N1716 53010 43001 N1716 53010 N1716 53006 N1716 53006 N1716 53006 N1716 53026 N1777 53026 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

20

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Dual Friction DF Disc DF PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Counterbalance T.O.B. Align Tool Pilot Bearing

CHEVROLET CAMARO, Z-28 - Continued 8 CYLINDER 1967.

4.6L 283" ENG. FLAT DIAPHRAGM

10.4

NOTE: 2PC REAR MAIN. WITH CAST THROW OUT ARM. 153 TOOTH Pressure Plate : CF361874 CFT361874 Disc : 383271 383271 DF383271 PP & Disc : DF271874 1967.

-

4.6L 283" ENG. RAISED DIAPHRAGM

1967. - 1970.

1969. - 1977.

DF383735 DF735552

11165552 23383735 01735552

5.0L 307" ENG. 3 SPD 2 BBL CF361874 CFT361874 383271 383271 -

DF383735 DF735552

11165552 23383735 01735552 -

11165552 23384148 01148552

DF384148 DF148552

11165552 23384148 01148552

LM165552 LM384148 LM148552

5.7L 350" ENG. 4 BBL, 4 SPD. -

5.0L 305" ENG. 3 SPD 2 BBL

NOTE: 2PC REAR MAIN Pressure Plate : CF361874 Disc : 383271 PP & Disc : -

CFT361874 383271 -

-

0 IN/OZ

#3 Clutch Pattern

N1716 53010 43001

1-1/8"-10

0 IN/OZ

1-1/8"-10 700100 900100

-

N1716 53010 43001

#2 Clutch Pattern

0 IN/OZ N1086 53010 -

1-1/8"-10

0 IN/OZ

#2 Clutch Pattern

N1716 53010 43001

1-1/8"-26

0 IN/OZ

#3 Clutch Pattern

N1716 53026 43001

1-1/8"-26

0 IN/OZ

#3 Clutch Pattern

N1716 53026 43001

1-1/8"-26

0 IN/OZ

#3 Clutch Pattern

N1716 53026 43001

1-1/8"-26

0 IN/OZ

700120 900561 10.4

DF383271 DF271874

1-1/8"-10

700120 900120

12 -

#2 Clutch Pattern

N1716 53010 43001

700120 900561 11

NOTE: 2PC REAR MAIN. 168 TOOTH. 12" HEAVY DUTY UPGRADE Pressure Plate : Disc : DF382612 PP & Disc : DF612909 1976. - 1977.

-

5.7L 350" ENG. 4 BBL, 4 SPD.

0 IN/OZ

700120 900120

12 -

1-1/8"-10

700100 900100

LM165552 LM384148 LM148552

6.6L 396" ENG.

NOTE: 2PC REAR MAIN. MUNCIE TRANS. Pressure Plate : CF165552 CFT165552 Disc : 384148 384148 PP & Disc : 1971. - 1977.

LM361675 LM383271 LM271675 11

DF384148 DF148552

#2 Clutch Pattern

N1716 53010 43001

#3 Clutch Pattern

-

6.6L 396" ENG.

0 IN/OZ

700120 900120

10.4 11361739 23383271 01271739

1-1/8"-10

700120 900120

LM165552 LM383735 LM735552

5.7L 350" ENG.

NOTE: 2PC REAR MAIN. 168 TOOTH. 12" HEAVY DUTY UPGRADE Pressure Plate : Disc : DF382612 PP & Disc : DF612909 1971. - 1977.

LM165552 LM383735 LM735552

10.4 DF383271 DF271874

#2 Clutch Pattern

700100 900100

11

NOTE: 2PC REAR MAIN. 168 TOOTH Pressure Plate : CF165552 CFT165552 Disc : 384148 384148 PP & Disc : 1971.

LM361675 LM383271 LM271675

6.6L 396" ENG.

NOTE: 2PC REAR MAIN. SAGINAW TRANS. 153 TOOTH Pressure Plate : CF361675 CFT361675 Disc : 383271 383271 DF383271 PP & Disc : DF271675 1971.

11361739 23383271 01271739

11

NOTE: 2PC REAR MAIN. 168 TOOTH Pressure Plate : CF165552 CFT165552 Disc : 383735 383735 PP & Disc : 1968. - 1973. Pressure Plate : Disc : PP & Disc :

DF383271 DF271675

0 IN/OZ N1086 53010 -

700100 900100

10.4

5.7L 350" ENG.

NOTE: 2PC REAR MAIN. 168 TOOTH Pressure Plate : CF165552 CFT165552 Disc : 383735 383735 PP & Disc : 1967. - 1970.

LM361675 LM383271 LM271675

5.0L 302" & 5.4L 327" ENG.

NOTE: 2PC REAR MAIN. 153 TOOTH Pressure Plate : CF361675 CFT361675 Disc : 383271 383271 PP & Disc : -

700100 900100 10.4

NOTE: 2PC REAR MAIN. STAMPED STEEL THROW OUT ARM. 153 TOOTH Pressure Plate : CF361675 CFT361675 11361739 Disc : 383271 383271 DF383271 23383271 PP & Disc : DF271675 01271739 1967. - 1970.

-

1-1/8"-10

#3 Clutch Pattern

N1716 53026 43001

1-1/8"-10

0 IN/OZ

700100 900100 #2 Clutch Pattern

N1086 53010 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

21

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Dual Friction DF Disc DF PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Counterbalance T.O.B. Align Tool Pilot Bearing

CHEVROLET CAMARO, Z-28 - Continued 8 CYLINDER 1977.

5.0L 302" ENG. 2 BBL

NOTE: 2PC REAR MAIN Pressure Plate : CF361675 Disc : 383271 PP & Disc : 1977.

CFT361675 383271 -

DF383271 DF271675

11361739 23383271 01271739

DF384148 DF148552

11165552 23384148 01148552

-

10.4 11361739 23383271 01271739

LM361675 LM383271 LM271675

NOTE: 2PC REAR MAIN. 168 TOOTH Pressure Plate : CF361675 CFT361675 Disc : 383271 383271 PP & Disc : -

DF383271 DF271675

11361739 23383271 01271739

LM361675 LM383271 LM271675

5.7L 350" ENG.

NOTE: 2PC REAR MAIN. 4 SPD M-20 TRANS. 153 TOOTH Pressure Plate : CF361675 CFT361675 Disc : 383271 383271 DF383271 PP & Disc : DF271675

11361739 23383271 01271739

LM361675 LM383271 LM271675

NOTE: 2PC REAR MAIN. 4 SPD M-20 TRANS. 168 TOOTH Pressure Plate : CF361675 CFT361675 Disc : 383271 383271 DF383271 PP & Disc : DF271675

11361739 23383271 01271739

LM361675 LM383271 LM271675

NOTE: 2PC REAR MAIN. 4 SPD M-21 TRANS Pressure Plate : CF165552 CFT165552 Disc : 384148 384148 PP & Disc : 1977. - 1981.

DF384148 DF148552

11165552 23384148 01148552

5.7L 350" ENG.

NOTE: 2PC REAR MAIN. 4 SPD M-21 TRANS, 12" HEAVY DUTY UPGRADE Pressure Plate : Disc : DF382612 PP & Disc : DF612909 1979. - 1982.

-

5.0L 305" ENG. 4 SPD. DF383271 DF271675

11361739 23383271 01271739

LM361675 LM383271 LM271675

NOTE: 2PC REAR MAIN. 168 TOOTH Pressure Plate : CF361675 CFT361675 Disc : 383271 383271 PP & Disc : -

DF383271 DF271675

11361739 23383271 01271739

LM361675 LM383271 LM271675

1981.

5.0L 305" ENG. Z-28 ONLY

NOTE: 2PC REAR MAIN. 168 TOOTH Pressure Plate : CF165552 CFT165552 Disc : 384148 384148 PP & Disc : -

11165552 23384148 01148552

0 IN/OZ

#2 Clutch Pattern

1-1/8"-26

0 IN/OZ

#3 Clutch Pattern

N1716 53026 43001

1-1/8"-26

0 IN/OZ

#3 Clutch Pattern

N1716 53026 43001

1-1/8"-10

0 IN/OZ

700100 900100 #2 Clutch Pattern

700120 900120

LM165552 LM384148 LM148552

N1716 53010 43001 N1716 53010 43001

700120 900120

11 DF384148 DF148552

1-1/8"-10

700120 900561

NOTE: 2PC REAR MAIN. 153 TOOTH Pressure Plate : CF361675 CFT361675 Disc : 383271 383271 PP & Disc : -

N1716 53010 43001

#2 Clutch Pattern

700120 900120

10.4

24.4 IN/OZ

N1716 53010 43001

#2 Clutch Pattern

-

N1716 53026 43001

0 IN/OZ

700100 900100

12

24.4 IN/OZ

1-1/8"-10

700120 900120

LM165552 LM384148 LM148552

N1716 53010 43001

#3 Clutch Pattern

#2 Clutch Pattern

11

0 IN/OZ

N1716 53026 43001

700100 900100

10.4

5.7L 350" ENG.

1-1/8"-26 700180 -

DF383271 DF271675

1977. - 1981.

#3 Clutch Pattern

-

5.0L 305" ENG.

1-1/8"-26 700180 -

12

NOTE: 2PC REAR MAIN. 153 TOOTH Pressure Plate : CF361675 CFT361675 Disc : 383271 383271 PP & Disc : -

1977. - 1979.

#2 Clutch Pattern

LM165552 LM384148 LM148552

6.6L 400" ENG. 4 BBL, 4 SPD.

1-1/8"-10 700100 900100

11

NOTE: 2PC REAR MAIN, 24.4 IN/OZ BAL. 12" HEAVY DUTY UPGRADE Pressure Plate : Disc : DF382612 PP & Disc : DF612909 1977. - 1978.

LM361675 LM383271 LM271675

6.6L 400" ENG. 4 BBL, 4 SPD.

NOTE: 2PC REAR MAIN, 24.4 IN/OZ BAL. Pressure Plate : CF165552 CFT165552 Disc : 384148 384148 PP & Disc : 1977.

10.4

N1716 53010 43001

#2 Clutch Pattern

N1716 53010 43001

1-1/8"-26

0 IN/OZ

700120 900120 #3 Clutch Pattern

N1716 53026 43001

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

22

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Dual Friction DF Disc DF PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Counterbalance T.O.B. Align Tool Pilot Bearing

CHEVROLET CAMARO, Z-28 - Continued 8 CYLINDER 1981.

5.0L 305" ENG. Z-28 ONLY

12

NOTE: 2PC REAR MAIN. 168 TOOTH. 12" HEAVY DUTY UPGRADE Pressure Plate : Disc : DF382612 PP & Disc : DF612909 1982. - 1983.

-

-

5.0L 305" ENG.

700120 900561 10.4

NOTE: 2PC REAR MAIN. 153 TOOTH Pressure Plate : CF361675 CFT361675 Disc : 384161 384161 PP & Disc : -

DF384161 DF161675

11361739 23384161 01161739

LM361675 LM384161 LM161675

NOTE: 2PC REAR MAIN. 168 TOOTH Pressure Plate : CF361675 CFT361675 Disc : 384161 384161 PP & Disc : -

DF384161 DF161675

11361739 23384161 01161739

LM361675 LM384161 LM161675

1984. - 1985.

5.0L 305" & 5.7L 350" ENG. 11360056 23384161 01161056

-

NOTE: O.E. CLUTCH DISC MAY BE 10". 2PC REAR MAIN. 168 TOOTH Pressure Plate : CF360056 CFT360056 Disc : 384161 384161 DF384161 PP & Disc : DF161056

11360056 23384161 01161056

-

1986 - 1992.

5.0L 305" & 5.7L 350" ENG.

NOTE: O.E. CLUTCH DISC MAY BE 10". 1PC REAR MAIN. 23.4IN/OZ BAL Pressure Plate : CF360056 CFT360056 11360056 Disc : 384161 384161 DF384161 23384161 PP & Disc : DF161056 01161056 1993. - 1997.

1993. - 1997.

11360010 23384148 01017010

#24 Clutch Pattern

#24 Clutch Pattern

1-1/8"-26 700142 900142 #14 Clutch Pattern

12

NOTE: THIS APPLICATION REQUIRES CENTERFORCE FLYWHEEL - SEE FLYWHEEL SECTION Pressure Plate : Disc : DF382612 PP & Disc : DF593010 -

1-1/8"-26 700177 -

12

6.2L ENG. LS3

1-1/8"-26 700177 -

NOTE: w/ HIGH BOOST FORCED INDUCTION AND/OR 175+ NITROUS. O.E. CLUTCH DISC MAY BE 11-1/2" Pressure Plate : 11369010 Disc : DF382612 23382612 PP & Disc : DF395010 01395010 2010 - 2011

1-1/8"-26

#2 Clutch Pattern

LM360010 LM384148 LM017010

5.7L 350" LS1 ENG.

0 IN/OZ

700170 900170

11 DF381488 DF017010

1-1/8"-26

#2 Clutch Pattern

-

5.7L 350" LS1 ENG.

NOTE: O.E. CLUTCH DISC MAY BE 11-1/2" Pressure Plate : CF360010 Disc : 381017 PP & Disc : 1998. - 2002.

11361020 23381039 01039020

#2 Clutch Pattern

700120 900120

11

-

N1716 53026 43001 N1716 53026 43001

#2 Clutch Pattern

-

CALLAWAY CAMARO'S

NOTE: PULL-TYPE CLUTCH. 1PC REAR MAIN. 23.4IN/OZ BAL. Pressure Plate : Disc : DF381039 PP & Disc : DF039020 1998. - 2002.

11361020 23381039 01039020

0 IN/OZ

700100 900100

11

NOTE: PULL-TYPE CLUTCH. 1PC REAR MAIN. 23.4IN/OZ BAL. Pressure Plate : CF361020 Disc : 381039 DF381039 PP & Disc : DF039020

1-1/8"-26

700120 900120

-

5.7L 350" ENG. LT1 & LT4

#3 Clutch Pattern

#2 Clutch Pattern

10.4

0 IN/OZ N1716 53026 43001

700100 900100

10.4

NOTE: O.E. CLUTCH DISC MAY BE 10". 2PC REAR MAIN. 153 TOOTH Pressure Plate : CF360056 CFT360056 Disc : 384161 384161 DF384161 PP & Disc : DF161056

1-1/8"-26

1-1/8"-26 700142 900142 #14 Clutch Pattern

1-1/8"-26 700142 900142 #14 Clutch Pattern

N1716 53026 43001 N1716 53026 43001 23.4 IN/OZ N1716 53026 43001 23.4 IN/OZ INCLUDED 53026 43001 23.4 IN/OZ INCLUDED 53026 43001 0 IN/OZ 53026 43001 0 IN/OZ 53026 43001 0 IN/OZ 53026 43003

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

23

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Dual Friction DF Disc DF PP & Disc

Counterbalance T.O.B. Align Tool Pilot Bearing

CHEVROLET CAVALIER, Z24, CORSICA, BERETTA 4 CYLINDER

1983. - 1988. Pressure Plate : Disc : PP & Disc :

2.0L 122" ENG. 5 SPD CF361910 * 384204 -

1985. - 1987. Pressure Plate : Disc : PP & Disc :

2.0L 122" ENG. MS361914 *

1988. - 1989. Pressure Plate : Disc : PP & Disc :

2.0L 122" ENG. CF361910 * 384204 -

1990. - 1992. Pressure Plate : Disc : PP & Disc :

2.3L 140" QUAD 4 ENG. MS361914 *

1990. - 1994. Pressure Plate : Disc : PP & Disc :

2.2L 135" ENG. CF361910 * 384204 -

1993. - 1994. Pressure Plate : Disc : PP & Disc :

2.3L 140" QUAD 4 ENG. MS361914 *

1995. Pressure Plate : Disc : PP & Disc :

2.3L 140" ENG CF360074 * 381042 -

1995. - 1999. Pressure Plate : Disc : PP & Disc :

2.2L 135" ENG. CF360072 * 384204 -

1996. - 1999. Pressure Plate : Disc : PP & Disc :

2.4L 146" ENG. CF360074 * 381042 -

2000. - 2002. Pressure Plate : Disc : PP & Disc :

2.2L 134" ENG. SOHC CF330713 *

2000. - 2002.

-

*

-

-

DF201914

*

11201914 23201914 01201914

* *

-

DF204910

-

*

-

*

11201914 23201914 01201914

* *

-

DF204910

-

*

-

*

11201914 23201914 01201914

* *

-

DF201074

-

*

-

DF204072

-

*

-

DF201074

-

*

-

-

*

-

2.4L 146" ENG. 5 SPD.

2.2L 134" ENG. DOHC, VIN F, MFI CF331156 *

-

*

-

*

-

# Clutch Pattern

*

11201914 23201914 01201914

-

N1744 53014 N1725 53014 N1744 53014 N1747 53014 N1744 53014 53014 53014 53014 53014 INCLUDED INCLUDED -

1"-14 -

9 DF561133

1"-14 # Clutch Pattern

9-1/8 DF140833

1"-14 # Clutch Pattern

8-7/16 DF130733

1"-14 # Clutch Pattern

9 -

1"-14 # Clutch Pattern

8-1/2 -

1"-14 # Clutch Pattern

9 -

1"-14 # Clutch Pattern

9-1/8 DF201914

1"-14 # Clutch Pattern

8-1/2 -

1"-14 # Clutch Pattern

9-1/8 DF201914

1"-14 # Clutch Pattern

8-1/2 -

1"-14 # Clutch Pattern

9-1/8

NOTE: INCLUDES SLAVE CYLINDER Pressure Plate : Disc : PP & Disc : CF008514 * 2002. - 2005. Pressure Plate : Disc : PP & Disc :

8-1/2 DF204910

1"-14 # Clutch Pattern

INCLUDED INCLUDED INCLUDED INCLUDED -

6 CYLINDER 1985. - 1986. Pressure Plate : Disc : PP & Disc :

2.8L 171" ENG. MS361914 *

9-1/8 -

DF201914

* *

-

1"-14 # Clutch Pattern

N1725 53014 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

24

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Dual Friction DF Disc DF PP & Disc

Counterbalance T.O.B. Align Tool Pilot Bearing

CHEVROLET CAVALIER, Z24, CORSICA, BERETTA - Continued 6 CYLINDER

1987. - 1989. Pressure Plate : Disc : PP & Disc :

2.8L 171" ENG. MS361914 *

1990. - 1992. Pressure Plate : Disc : PP & Disc :

3.1L 189" ENG. MS361914 *

1993. - 1994. Pressure Plate : Disc : PP & Disc :

3.1L 189" ENG. CF361963 * 384201 -

9-1/8 -

DF201914

*

11201914 23201914 01201914

* *

-

# Clutch Pattern

9-1/8 -

DF201914

*

11201914 23201914 01201914

* *

-

DF201963

-

DF201914

-

DF201914

*

-

*

*

11201914 23201914 01201914

*

*

11201914 23201914 01201914

1"-14 # Clutch Pattern

9-1/8 -

1"-14 -

-

1"-14 # Clutch Pattern

N1747 53014 N1747 53014 53014 -

CELEBRITY 4 CYLINDER 1984. - 1986. Pressure Plate : Disc : PP & Disc :

2.5L 151" ENG. MS361914 *

9-1/8

*

-

1"-14 # Clutch Pattern

N1725 53014 -

6 CYLINDER 1984. - 1986. Pressure Plate : Disc : PP & Disc :

2.8L 171" ENG. MS361914 *

1987. - 1989. Pressure Plate : Disc : PP & Disc :

2.8L 171" ENG. MS361914 *

9-1/8

*

-

# Clutch Pattern

9-1/8 -

DF201914

*

11201914 23201914 01201914

* *

1"-14 -

-

1"-14 # Clutch Pattern

N1725 53014 N1747 53014 -

CHEVY II, NOVA, NOVA SS, CONCOURS 6 CYLINDER 1967. - 1970. Pressure Plate : Disc : PP & Disc :

3.8L 230" ENG. CF361874 383271 -

1967. - 1978. Pressure Plate : Disc : PP & Disc :

4.1L 250" ENG. CF361874 383271 -

1979. Pressure Plate : Disc : PP & Disc :

4.1L 250" ENG. CF361675 383271 -

10.4 CFT361874 383271 -

DF383271 DF271874

-

-

#2 Clutch Pattern

10.4 CFT361874 383271 CFT361675 383271 -

DF383271 DF271874 DF383271 DF271675

11361739 23383271 01271739

1-1/8"-10 -

-

1-1/8"-10 # Clutch Pattern

1-1/8"-10 -

N1086 53010 N1086 53010 -

10.4 LM361675 LM383271 LM271675

# Clutch Pattern

N1716 53010 43001

10.4

1-1/8"-10

0 IN/OZ

8 CYLINDER 1964. - 1969.

5.4L 327" ENG

NOTE: 2PC REAR MAIN. 153 TOOTH Pressure Plate : CF361675 CFT361675 Disc : 383271 383271 PP & Disc : -

DF383271 DF271675

11361739 23383271 01271739

LM361675 LM383271 LM271675

NOTE: 2PC REAR MAIN. 168 TOOTH Pressure Plate : CF361675 CFT361675 Disc : 383271 383271 PP & Disc : -

DF383271 DF271675

11361739 23383271 01271739

LM361675 LM383271 LM271675

1967. - 1970.

6.6L 396" ENG.

700100 900100 #2 Clutch Pattern

700120 900120

11

NOTE: 2PC REAR MAIN. 168 TOOTH Pressure Plate : CF165552 CFT165552 Disc : 383735 383735 PP & Disc : -

DF383735 DF735552

11165552 23383735 01735552

LM165552 LM383735 LM735552

N1716 53010 43001

#2 Clutch Pattern

N1716 53010 43001

1-1/8"-10

0 IN/OZ

700120 900120 #3 Clutch Pattern

N1716 53010 43001

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

25

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Dual Friction DF Disc DF PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Counterbalance T.O.B. Align Tool Pilot Bearing

CHEVROLET CHEVY II, NOVA, NOVA SS, CONCOURS - Continued 8 CYLINDER 1968. - 1973.

5.0L 307" ENG.

10.4

NOTE: 2PC REAR MAIN. 153 TOOTH Pressure Plate : CF361874 CFT361874 Disc : 383271 383271 PP & Disc : -

DF383271 DF271874

-

-

NOTE: 2PC REAR MAIN. 168 TOOTH Pressure Plate : CF361874 CFT361874 Disc : 383271 383271 PP & Disc : -

DF383271 DF271874

-

-

1969. - 1977.

5.7L 350" ENG. 3 SPD 2&4 BBL

700100 900100 #2 Clutch Pattern

700120 900120 10.4

NOTE: 2PC REAR MAIN. 153 TOOTH Pressure Plate : CF361675 CFT361675 Disc : 383271 383271 PP & Disc : -

DF383271 DF271675

11361739 23383271 01271739

LM361675 LM383271 LM271675

NOTE: 2PC REAR MAIN. 168 TOOTH Pressure Plate : CF361675 CFT361675 Disc : 383271 383271 PP & Disc : -

DF383271 DF271675

11361739 23383271 01271739

LM361675 LM383271 LM271675

1971.

6.6L 396" ENG.

1971.

DF384148 DF148552

11165552 23384148 01148552

6.6L 396" ENG.

NOTE: 2PC REAR MAIN. 168 TOOTH. 12" HEAVY DUTY UPGRADE Pressure Plate : Disc : DF382612 PP & Disc : DF612909 1976. - 1977.

-

10.4 DF383271 DF271675

11361739 23383271 01271739

LM361675 LM383271 LM271675

NOTE: 2PC REAR MAIN. 168 TOOTH Pressure Plate : CF361675 CFT361675 Disc : 383271 383271 PP & Disc : -

DF383271 DF271675

11361739 23383271 01271739

LM361675 LM383271 LM271675

5.0L 302" ENG. 2 BBL

NOTE: 2PC REAR MAIN. 153 TOOTH Pressure Plate : CF361675 CFT361675 Disc : 383271 383271 PP & Disc : -

DF383271 DF271675

11361739 23383271 01271739

LM361675 LM383271 LM271675

NOTE: 2PC REAR MAIN. 168 TOOTH Pressure Plate : CF361675 CFT361675 Disc : 383271 383271 PP & Disc : -

DF383271 DF271675

11361739 23383271 01271739

LM361675 LM383271 LM271675

1978.

5.0L 305" ENG. DF383271 DF271874

-

-

NOTE: 2PC REAR MAIN. 168 TOOTH Pressure Plate : CF361874 CFT361874 Disc : 383271 383271 PP & Disc : -

DF383271 DF271874

-

-

1979.

5.0L 305" ENG. DF383271 DF271675

11361739 23383271 01271739

0 IN/OZ

#3 Clutch Pattern

N1716 53026 43001

1-1/8"-26

0 IN/OZ

#3 Clutch Pattern

N1716 53026 43001

1-1/8"-10

0 IN/OZ

700120 900120 #2 Clutch Pattern

1-1/8"-10

0 IN/OZ

#2 Clutch Pattern

700120 900120

N1716 53010 43001

#2 Clutch Pattern

N1716 53010 43001

1-1/8"-10

0 IN/OZ

700100 900100 #2 Clutch Pattern

700120 900120

LM361675 LM383271 LM271675

N1716 53010 43001 N1716 53010 43001

700100 900100

10.4

NOTE: 2PC REAR MAIN. 153 TOOTH Pressure Plate : CF361675 CFT361675 Disc : 383271 383271 PP & Disc : -

1-1/8"-26

#2 Clutch Pattern

10.4

NOTE: 2PC REAR MAIN. 153 TOOTH Pressure Plate : CF361874 CFT361874 Disc : 383271 383271 PP & Disc : -

#2 Clutch Pattern

700100 900100

10.4

N1716 53010 43001 N1716 53010 43001

700120 900561

NOTE: 2PC REAR MAIN. 153 TOOTH Pressure Plate : CF361675 CFT361675 Disc : 383271 383271 PP & Disc : -

1977.

0 IN/OZ

700120 900120

-

5.0L 305" ENG. 3 SPD 2 BBL

1-1/8"-10

700120 900120

12

N1086 53010 -

#2 Clutch Pattern

#2 Clutch Pattern

LM165552 LM384148 LM148552

0 IN/OZ

N1086 53010 -

700100 900100

11

NOTE: 2PC REAR MAIN. 168 TOOTH Pressure Plate : CF165552 CFT165552 Disc : 384148 384148 PP & Disc : -

1-1/8"-10

N1086 53010 -

#2 Clutch Pattern

N1086 53010 -

1-1/8"-10

0 IN/OZ

700100 900100 #2 Clutch Pattern

N1716 53010 43001

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

26

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Dual Friction DF Disc DF PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Counterbalance T.O.B. Align Tool Pilot Bearing

CHEVROLET CHEVY II, NOVA, NOVA SS, CONCOURS - Continued 8 CYLINDER

5.0L 305" ENG. NEW! 1979. NOTE: 2PC REAR MAIN. 168 TOOTH Pressure Plate : CF361675 CFT361675 Disc : 383271 383271 PP & Disc : -

10.4 DF383271 DF271675

11361739 23383271 01271739

LM361675 LM383271 LM271675

1-1/8"-10 700120 900120 #2 Clutch Pattern

0 IN/OZ N1716 53010 43001

COBALT 4 CYLINDER 2005. - 2007.

2.0L SUPERCHARGED

9-1/8"

NOTE: REPLACES OE CLUTCH & INCLUDES ALUMINUM CENTERFORCE FLYWHEEL. Pressure Plate : Disc : PP & Disc : DF010249 01010249 * *

-

NEW! 2005. - 2007. 2.0L SUPERCHARGED NOTE: REPLACEMENT PARTS FOR DF010249 & 01010249. REQUIRES CENTERFORCE FLYWHEEL. Pressure Plate : Disc : PP & Disc : DF201249 01201249 * *

1"-14 # Clutch Pattern

9-1/8"

1"-14 900149 # Clutch Pattern

ZERO -

CORVETTE 8 CYLINDER 1957. - 1961.

4.6L 283" ENG. EXC. FUEL INJ.

10.4

NOTE: 2PC REAR MAIN. O.E. CLUTCH DISC MAY BE 10" Pressure Plate : CF361675 CFT361675 Disc : 383271 383271 DF383271 PP & Disc : DF271675 1958. - 1959.

11361739 23383271 01271739

4.6L 283" ENG. w/FUEL INJ. -

7.0L 427" ENG. w/ 10-1/2" CLUTCH

LM165552 LM383735 LM735552

5.7L 350" ENG. w/ 10-1/2" CLUTCH

LM361675 LM383271 LM271675

DF384148 DF148552

11165552 23384148 01148552

1-1/8"-10

0 IN/OZ

#2 Clutch Pattern

N1716 53010 43001

1-1/8"-10

0 IN/OZ

#2 Clutch Pattern

N1716 53010 -

1-1/8"-10

0 IN/OZ

#3 Clutch Pattern

N1716 53010 43001

1-1/8"-10

0 IN/OZ

#3 Clutch Pattern

N1716 53010 43001

1-1/8"-10

0 IN/OZ

700100 900100 #2 Clutch Pattern

11

NOTE: 2PC REAR MAIN. 33.0 IN/OZ BAL. Pressure Plate : CF165552 CFT165552 Disc : 384148 384148 PP & Disc : -

#2 Clutch Pattern

N1086 53010 -

700120 900120

10.4

7.5L 454" ENG.

0 IN/OZ

700120 900120

11

NOTE: 2PC REAR MAIN. ***LONGER TOB AVAILABLE N1466 FOR CFT & DF ONLY.*** Pressure Plate : CF361675 CFT361675 11361739 Disc : 383271 383271 DF383271 23383271 PP & Disc : DF271675 01271739 1970. - 1974.

LM165552 LM383735 LM735552

5.7L 350" ENG. w/ 11" CLUTCH

1-1/8"-10

700100 900100

11

NOTE: 2PC REAR MAIN. ***LONGER TOB AVAILABLE N1466 FOR CFT & DF ONLY.*** Pressure Plate : CF165552 CFT165552 11165552 Disc : 383735 383735 DF383735 23383735 PP & Disc : DF735552 01735552 1969. - 1971.

LM361675 LM383271 LM271675

7.0L 427" ENG. w/ 11" CLUTCH

#2 Clutch Pattern

700100 900100

10.4

NOTE: 2PC REAR MAIN. ***LONGER TOB AVAILABLE N1466 FOR CFT & DF ONLY.*** Pressure Plate : CF165552 CFT165552 11165552 Disc : 383735 383735 DF383735 23383735 PP & Disc : DF735552 01735552 1967. - 1971.

LM361675 LM383271 LM271675

LM165552 LM384148 LM148552

0 IN/OZ N1716 53010 -

700100 900100 10.4

NOTE: 2PC REAR MAIN. ***LONGER TOB AVAILABLE N1466 FOR CFT & DF ONLY.*** Pressure Plate : CF361739 CFT361739 11361739 Disc : 383271 383271 DF383271 23383271 PP & Disc : DF271739 01271739 1966. - 1969.

-

5.4L 327" ENG.

NOTE: 2PC REAR MAIN. ***LONGER TOB AVAILABLE N1466 FOR CFT & DF ONLY.*** Pressure Plate : CF361675 CFT361675 11361739 Disc : 383271 383271 DF383271 23383271 PP & Disc : DF271675 01271739 1966. - 1969.

700100 900100

10.4

NOTE: 2PC REAR MAIN. O.E. CLUTCH DISC MAY BE 10" Pressure Plate : CF361874 CFT361874 Disc : 383271 383271 DF383271 PP & Disc : DF271874 1962. - 1968.

LM361675 LM383271 LM271675

1-1/8"-10

1-1/8"-26 700140 900140 #3 Clutch Pattern

N1716 53010 43001 33.0 IN/OZ N1716 53026 43001

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

27

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Dual Friction DF Disc DF PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Counterbalance T.O.B. Align Tool Pilot Bearing

CHEVROLET CORVETTE - Continued 8 CYLINDER 1970. - 1974.

7.5L 454" ENG.

12

NOTE: 2PC REAR MAIN. 33.0 IN/OZ BAL. 12" HEAVY DUTY UPGRADE Pressure Plate : Disc : DF382612 PP & Disc : DF612909 1972.

CFT361675 384161 -

10.4 DF384161 DF161675

11361739 23384161 01161739

CFT165552 384148 -

DF384148 DF148552

11165552 23384148 01148552

-

DF383271 DF271675

11361739 23383271 01271739

CFT165552 384148 -

11165552 23384148 01148552

LM361675 LM384161 LM161675

5.7L 350" ENG.

5.7L 350" ENG. L98 & LT1 w/DMF

1989. - 1993.

-

-

#3 Clutch Pattern

N1716 53026 43001

1-1/8"-10

0 IN/OZ

#2 Clutch Pattern

N1716 53010 43001

1-1/8"-26

0 IN/OZ

#3 Clutch Pattern

N1716 53026 43001

1-1/8"-26

0 IN/OZ

1-1/8"-26

1-1/8"-26

#24 Clutch Pattern

1-1/8"-26 # Clutch Pattern

11 DF000100

0 IN/OZ

700175 -

-

5.7L CALLAWAY CORVETTE'S w/DMF

NOTE: PULL-TYPE CLUTCH, SOLID DISC HUB. Pressure Plate : Disc : PP & Disc : -

1-1/8"-26

#2 Clutch Pattern

11 DF000100

#3 Clutch Pattern

N1716 53026 43001

700170 900170

11

NOTE: PULL-TYPE CLUTCH, SOLID DISC HUB. Pressure Plate : CF361000 Disc : 384100 PP & Disc : -

0 IN/OZ

#3 Clutch Pattern

NOTE: w/AFTERMARKET SINGLE-MASS FLYWHEEL. SPRUNG HUB DISC. PULL-TYPE CLUTCH Pressure Plate : 11361000 Disc : DF381039 23381039 PP & Disc : DF039000 01039000 1989. - 1993.

1-1/8"-26

700120 900120

10-3/4 11361911 23384208 01208911

#2 Clutch Pattern

N1716 53026 43001

700120 900561

LM165552 LM384148 LM148552

5.7L 350" ENG.

NOTE: 10-3/4" DISC w/10.4" PRESS PLATE BOLT PATTERN Pressure Plate : CF361911 CFT361911 Disc : 384208 384208 DF384208 PP & Disc : DF161911 1989. - 1993.

11

DF384148 DF148552

0 IN/OZ

700100 900100

12

5.7L 350" HIGH PERF. ENG.

NOTE: 2PC REAR MAIN. Pressure Plate : CF165552 Disc : 384148 PP & Disc : 1984. - 1988.

LM361675 LM383271 LM271675

5.7L 350" HIGH PERF. ENG. -

1-1/8"-26

700120 900561 10.4

NOTE: 2PC REAR MAIN. 12" HEAVY DUTY UPGRADE Pressure Plate : Disc : DF382612 PP & Disc : DF612909 1978. - 1983.

-

5.7L 350" ENG. (NON-HIGH PERF. ENG) CFT361675 383271 -

#3 Clutch Pattern

700120 900120

12

-

33.0 IN/OZ N1716 53026 43001

700100 900100

LM165552 LM384148 LM148552

5.7L 350" ENG.

NOTE: 2PC REAR MAIN. Pressure Plate : CF361675 Disc : 383271 PP & Disc : 1978. - 1983

LM361675 LM384161 LM161675 11

NOTE: 2PC REAR MAIN. 12" HEAVY DUTY UPGRADE Pressure Plate : Disc : DF382612 PP & Disc : DF612909 1978.

700140 -

5.7L 350" ENG.

NOTE: 2PC REAR MAIN. Pressure Plate : CF165552 Disc : 384148 PP & Disc : 1973. - 1977.

-

5.7L 350" ENG. 4 BBL w/4 SPD

NOTE: 2PC REAR MAIN. Pressure Plate : CF361675 Disc : 384161 PP & Disc : 1973. - 1977.

-

1-1/8"-26

1-1/8"-26 # Clutch Pattern

N1716 53026 43001 23.4 IN/OZ N1716 53026 23.4 IN/OZ INCLUDED 53026 INCLUDED 53026 INCLUDED 53026 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

28

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Dual Friction DF Disc DF PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Counterbalance T.O.B. Align Tool Pilot Bearing

CHEVROLET CORVETTE - Continued 8 CYLINDER 1990. - 1993.

5.7L 350" LT5 ENG. ZR1 w/DMF

NOTE: PULL-TYPE CLUTCH, SOLID DISC HUB. Pressure Plate : Disc : PP & Disc : 1994. - 1995.

11 DF063084

-

-

5.7L 350" LT5 ENG ZR1

# Clutch Pattern

11

NOTE: w/AFTERMARKET SINGLE-MASS FLYWHEEL. SPRUNG HUB DISC. PULL-TYPE CLUTCH Pressure Plate : Disc : DF381039 PP & Disc : DF930140 1994. - 1995.

5.7L 350" LT5 ENG. ZR1 w/DMF

NOTE: PULL-TYPE CLUTCH, SOLID DISC HUB. Pressure Plate : Disc : PP & Disc : 1994. - 1996.

# Clutch Pattern

-

5.7L 350" ENG. LT1 & LT4 w/DMF

NOTE: PULL-TYPE CLUTCH, SOLID DISC HUB. Pressure Plate : CF361130 Disc : 384100 PP & Disc : 1994. - 1996.

-

-

# Clutch Pattern

-

5.7L 350" LT1 & LT4

11"

CALLAWAY CORVETTE'S

1997. - 2004.

5.7L 350" ENG. LS1

NOTE: O.E. CLUTCH DISC MAY BE 11-1/2" Pressure Plate : CF360010 Disc : 381017 PP & Disc : 1997. - 2004.

DF381488 DF017010

11360010 23384148 01017010

5.7L 350" LS1 & LS6 ENG.

5.7L 350" ENG. LS6

NOTE: O.E. CLUTCH DISC MAY BE 11-1/2" Pressure Plate : CF360010 Disc : 381017 PP & Disc : 2005. - 2007.

11 DF381488 DF017010

11360010 23384148 01017010

LM360010 LM384148 LM017010

6.0L LS2 ENG w/OE SMF.

2006. - 2010.

#14 Clutch Pattern

1-1/8"-26

1-1/8"-26 700142 900142 #14 Clutch Pattern

12

NOTE: THIS APPLICATION REQUIRES CENTERFORCE FLYWHEEL - SEE FLYWHEEL SECTION Pressure Plate : 11369010 Disc : DF382612 23382612 PP & Disc : DF395010 01395010

700142 900142

#14 Clutch Pattern

-

7.0L LS7 ENG.

1-1/8"-26

700142 900142

12

NOTE: THIS APPLICATION REQUIRES CENTERFORCE FLYWHEEL - SEE FLYWHEEL SECTION Pressure Plate : 11369010 Disc : DF382612 23382612 PP & Disc : DF395010 01395010

1-1/8"-26

#14 Clutch Pattern

NOTE: w/ HIGH BOOST FORCED INDUCTION AND/OR 175+ NITROUS O.E. CLUTCH DISC MAY BE 11-1/2" Pressure Plate : 11369010 Disc : DF382612 23382612 PP & Disc : DF395010 01395010 2001. - 2003.

1-1/8"-26

700142 900142

12

-

INCLUDED 53026 INCLUDED 53026 -

23.4 IN/OZ

#24 Clutch Pattern

LM360010 LM384148 LM017010

-

1-1/8"-26

11

INCLUDED 53026 -

# Clutch Pattern

#24 Clutch Pattern

-

-

INCLUDED 53026 -

700175 11

NOTE: w/SINGLE-MASS FLYWHEEL. SPRUNG HUB DISC. PULL-TYPE CLUTCH Pressure Plate : 11360084 Disc : DF381039 23381039 PP & Disc : DF039084 01039084

1-1/8"-26 -

NOTE: w/AFTERMARKET SINGLE-MASS FLYWHEEL. SPRUNG HUB DISC. PULL-TYPE CLUTCH Pressure Plate : 11361130 Disc : DF381039 23381039 PP & Disc : DF039130 01039130 1994. - 1996.

1-1/8"-26 -

11 DF100130

1-1/8"-26 -

11 DF100140

1-1/8"-26

1-1/8"-26 700142 900142 #14 Clutch Pattern

INCLUDED 53026 INCLUDED 53026 0 IN/OZ N1777 53026 43001 0 IN/OZ N1777 53026 43001 0 IN/OZ N1777 53026 43001 0 IN/OZ 53026 43003 0 IN/OZ 53026 43003

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

29

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Dual Friction DF Disc DF PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Counterbalance T.O.B. Align Tool Pilot Bearing

CHEVROLET CORVETTE - Continued 8 CYLINDER 2007

6.0L LS2 ENG OE DMF

12

NOTE: THIS APPLICATION REQUIRES CENTERFORCE FLYWHEEL - SEE FLYWHEEL SECTION. Pressure Plate : Disc : DF382612 PP & Disc : DF612010 -

-

NOTE: THIS APPLICATION INCLUDES CENTERFORCE FLYWHEEL. Pressure Plate : Disc : DF382612 PP & Disc : DF612142

-

2008. - 2010.

-

6.2L LS3 ENG. w/OE SMF.

900143 #14 Clutch Pattern

INCLUDED #14 Clutch Pattern

12

NOTE: THIS APPLICATION REQUIRES CENTERFORCE FLYWHEEL - SEE FLYWHEEL SECTION Pressure Plate : 11369010 Disc : DF382612 23382612 PP & Disc : DF395010 01395010

1-1/8"- 26

-

1-1/8"-26 700142 900142 #14 Clutch Pattern

0 IN/OZ 53026 43003 INCLUDED INCLUDED INCLUDED 0 IN/OZ 53026 43003

EL CAMINO, MONTE CARLO, CHEVELLE, MALIBU, MALIBU SS 6 CYLINDER 1966. - 1969. Pressure Plate : Disc : PP & Disc :

3.8L 230" ENG. CF361874 383271 -

1967. - 1977. Pressure Plate : Disc : PP & Disc :

4.1L 250" ENG. CF361874 383271 -

1978. Pressure Plate : Disc : PP & Disc :

3.8L 231" ENG. CF361874 383271 -

1978. - 1979. Pressure Plate : Disc : PP & Disc :

3.3L 200" ENG. CF361675 383271 -

1980. - 1981. Pressure Plate : Disc : PP & Disc :

3.8L 229" ENG. CF361675 383271 -

10.4 CFT361874 383271 -

DF383271 DF271874

-

-

#2 Clutch Pattern

10.4 CFT361874 383271 -

DF383271 DF271874

-

-

CFT361675 383271 CFT361675 383271 -

DF383271 DF271874 DF383271 DF271675 DF383271 DF271675

-

1-1/8"-10 # Clutch Pattern

10.4 CFT361874 383271 -

1-1/8"-10 -

-

1-1/8"-10 #2 Clutch Pattern

1-1/8"-10 -

N1086 53010 N1086 53010 N1086 53010 -

11361739 23383271 01271739

10.4 LM361675 LM383271 LM271675

11361739 23383271 01271739

10.4 LM361675 LM383271 LM271675

# Clutch Pattern

N1716 53010 43001

10.4

1-1/8"-10

0 IN/OZ

# Clutch Pattern

1-1/8"-10 -

N1716 53010 43001

8 CYLINDER 1964. - 1967.

4.6L 283" ENG. 3 SPD

NOTE: 2PC REAR MAIN. 153 TOOTH Pressure Plate : CF361874 CFT361874 Disc : 383271 383271 PP & Disc : -

DF383271 DF271874

-

-

NOTE: 2PC REAR MAIN. 168 TOOTH Pressure Plate : CF361874 CFT361874 Disc : 383271 383271 PP & Disc : -

DF383271 DF271874

-

-

1964. - 1967.

4.6L 283" ENG. 4 SPD

700100 900100 #2 Clutch Pattern

700120 900120 10.4

NOTE: 2PC REAR MAIN. 153 TOOTH Pressure Plate : CF361675 CFT361675 Disc : 383271 383271 PP & Disc : -

DF383271 DF271675

11361739 23383271 01271739

LM361675 LM383271 LM271675

NOTE: 2PC REAR MAIN. 168 TOOTH Pressure Plate : CF361675 CFT361675 Disc : 383271 383271 PP & Disc : -

DF383271 DF271675

11361739 23383271 01271739

LM361675 LM383271 LM271675

N1086 53010 -

#2 Clutch Pattern

N1086 53010 -

1-1/8"-10

0 IN/OZ

700100 900100 #2 Clutch Pattern

700120 900120 #2 Clutch Pattern

N1716 53010 43001 N1716 53010 43001

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

30

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Dual Friction DF Disc DF PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Counterbalance T.O.B. Align Tool Pilot Bearing

CHEVROLET EL CAMINO, MONTE CARLO, CHEVELLE, MALIBU, MALIBU SS - Continued 8 CYLINDER 1964. - 1969.

5.4L 327" ENG.

10.4

NOTE: 2PC REAR MAIN. 153 TOOTH Pressure Plate : CF361675 CFT361675 Disc : 383271 383271 PP & Disc : -

DF383271 DF271675

11361739 23383271 01271739

LM361675 LM383271 LM271675

NOTE: 2PC REAR MAIN. 168 TOOTH Pressure Plate : CF361675 CFT361675 Disc : 383271 383271 PP & Disc : -

DF383271 DF271675

11361739 23383271 01271739

LM361675 LM383271 LM271675

1966. - 1970.

6.6L 396" ENG.

1967. - 1970.

DF383735 DF735552

11165552 23383735 01735552

11165552 23383735 01735552

5.0L 307" ENG. 4 SPD 11361739 23383271 01271739

LM361675 LM383271 LM271675

NOTE: 2PC REAR MAIN. 168 TOOTH Pressure Plate : CF361675 CFT361675 Disc : 383271 383271 PP & Disc : -

DF383271 DF271675

11361739 23383271 01271739

LM361675 LM383271 LM271675

5.0L 307" ENG. 3 SPD

NOTE: 2PC REAR MAIN. 153 TOOTH Pressure Plate : CF361675 CFT361675 Disc : 383271 383271 PP & Disc : -

DF383271 DF271675

11361739 23383271 01271739

LM361675 LM383271 LM271675

NOTE: 2PC REAR MAIN. 168 TOOTH Pressure Plate : CF361675 CFT361675 Disc : 383271 383271 PP & Disc : -

DF383271 DF271675

11361739 23383271 01271739

LM361675 LM383271 LM271675

5.7L 350" ENG. w/10-1/2" CLUTCH DF383271 DF271675

11361739 23383271 01271739

LM361675 LM383271 LM271675

NOTE: 2PC REAR MAIN. 168 TOOTH Pressure Plate : CF361675 CFT361675 Disc : 383271 383271 PP & Disc : -

DF383271 DF271675

11361739 23383271 01271739

LM361675 LM383271 LM271675

1970.

6.6L 400" ENG.

1970. - 1974.

DF383735 DF735552

11165552 23383735 01735552

NOTE: 2PCS REAR MAIN. 33.0 IN/OZ BAL. Pressure Plate : CF165552 CFT165552 Disc : 384148 384148 PP & Disc : -

11165552 23384148 01148552

0 IN/OZ

#3 Clutch Pattern

N1716 53010 43001

1-1/8"-10

0 IN/OZ

#2 Clutch Pattern

1-1/8"-10

0 IN/OZ

700120 900120

N1716 53010 43001

#2 Clutch Pattern

N1716 53010 43001

1-1/8"-10

0 IN/OZ

700100 900100 #2 Clutch Pattern

700120 900120 #2 Clutch Pattern

1-1/8"-10 700180 #3 Clutch Pattern

LM165552 LM384148 LM148552

N1716 53010 43001 N1716 53010 43001

#2 Clutch Pattern

11 DF384148 DF148552

1-1/8"-10

700100 900100

LM165552 LM383735 LM735552

7.5L 454" ENG.4 SPD

#3 Clutch Pattern

N1716 53010 43001

700120 900120

11

NOTE: 2PCS REAR MAIN. 24.4 IN/OZ BAL. Pressure Plate : CF165552 CFT165552 Disc : 383735 383735 PP & Disc : -

0 IN/OZ

#2 Clutch Pattern

10.4

NOTE: 2PC REAR MAIN. 153 TOOTH Pressure Plate : CF361675 CFT361675 Disc : 383271 383271 PP & Disc : -

1-1/8"-10

700100 900100

10.4

N1716 53010 43001

#2 Clutch Pattern

700120 900120

10.4

0 IN/OZ

N1716 53010 43001

700120 900120

LM165552 LM383735 LM735552

DF383271 DF271675

1969. - 1975.

700120 900120

11

NOTE: 2PC REAR MAIN. 153 TOOTH Pressure Plate : CF361675 CFT361675 Disc : 383271 383271 PP & Disc : -

1968. - 1973.

#2 Clutch Pattern

LM165552 LM383735 LM735552

5.7L 350" ENG. 11" CLUTCH

NOTE: 2PC REAR MAIN. MUNCIE TRANS. 168 TOOTH. Pressure Plate : CF165552 CFT165552 Disc : 383735 383735 DF383735 PP & Disc : DF735552 1968. - 1971.

700100 900100

11

NOTE: 2PC REAR MAIN. 168 TOOTH Pressure Plate : CF165552 CFT165552 Disc : 383735 383735 PP & Disc : -

1-1/8"-10

1-1/8"-26 700140 900140 #3 Clutch Pattern

N1716 53010 43001 N1716 53010 43001 24.4 IN/OZ N1716 53010 43001 33.0 IN/OZ N1716 53026 43001

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

31

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Dual Friction DF Disc DF PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Counterbalance T.O.B. Align Tool Pilot Bearing

CHEVROLET EL CAMINO, MONTE CARLO, CHEVELLE, MALIBU, MALIBU SS - Continued 8 CYLINDER 1970. - 1974.

7.5L 454" ENG.4 SPD

12

NOTE: 2PCS REAR MAIN. 33.0 IN/OZ BAL. 12" HEAVY DUTY UPGRADE Pressure Plate : Disc : DF382612 PP & Disc : DF612909 1971.

DF384148 DF148552

11165552 23384148 01148552

-

6.6L 396" ENG. DF384148 DF148552

11165552 23384148 01148552

-

DF384148 DF148552

11165552 23384148 01148552

11165552 23383735 01735552

LM165552 LM383735 LM735552

5.0L 305" ENG. 3 SPD 2 BBL DF383271 DF271675

11361739 23383271 01271739

LM361675 LM383271 LM271675

NOTE: 2PC REAR MAIN. 168 TOOTH Pressure Plate : CF361675 CFT361675 Disc : 383271 383271 PP & Disc : -

DF383271 DF271675

11361739 23383271 01271739

LM361675 LM383271 LM271675

5.0L 305" ENG. DF383271 DF271874

-

-

NOTE: 2PC REAR MAIN. 168 TOOTH Pressure Plate : CF361874 CFT361874 Disc : 383271 383271 PP & Disc : -

DF383271 DF271874

-

-

0 IN/OZ

#3 Clutch Pattern

N1716 53026 43001

1-1/8"-26

0 IN/OZ

1-1/8"-26

1-1/8"-26

N1716 53026 43001 24.4 IN/OZ N1716 53026 43001 24.4 IN/OZ

#3 Clutch Pattern

N1716 53026 43001

1-1/8"-10

0 IN/OZ

#3 Clutch Pattern

N1716 53010 43001

1-1/8"-10

0 IN/OZ

700100 900100 #2 Clutch Pattern

700120 900120

10.4

NOTE: 2PC REAR MAIN. 153 TOOTH Pressure Plate : CF361874 CFT361874 Disc : 383271 383271 PP & Disc : -

1-1/8"-26

700120 900120

10.4

NOTE: 2PC REAR MAIN. 153 TOOTH Pressure Plate : CF361675 CFT361675 Disc : 383271 383271 PP & Disc : -

1978.

#3 Clutch Pattern

N1716 53026 43001

700180 11

DF383735 DF735552

0 IN/OZ

#3 Clutch Pattern

-

6.6L 402" ENG.

1-1/8"-26

700180 -

12 -

#3 Clutch Pattern

N1716 53026 43001

#3 Clutch Pattern

LM165552 LM384148 LM148552

6.6L 400" ENG.

0 IN/OZ

700120 900561 11

NOTE: 2PC REAR MAIN. 168 TOOTH Pressure Plate : CF165552 CFT165552 Disc : 383735 383735 PP & Disc : 1976. - 1977.

-

6.6L 400" ENG.

1-1/8"-26

700120 900120

12

NOTE: 2PCS REAR MAIN. 24.4 IN/OZ BAL. 12" HEAVY DUTY UPGRADE Pressure Plate : Disc : DF382612 PP & Disc : DF612909 1972.

LM165552 LM384148 LM148552

6.6L 396" ENG.

#3 Clutch Pattern

700120 900561 11

NOTE: 2PCS REAR MAIN. 24.4 IN/OZ BAL. Pressure Plate : CF165552 CFT165552 Disc : 384148 384148 PP & Disc : 1971.

-

33.0 IN/OZ N1716 53026 43001

700120 900120

12

NOTE: 2PCS REAR MAIN. 168 TOOTH. 12" HEAVY DUTY UPGRADE Pressure Plate : Disc : DF382612 PP & Disc : DF612909 1971.

LM165552 LM384148 LM148552

5.7L 350" ENG. 4 SPD.

NOTE: 2PCS REAR MAIN. 168 TOOTH. Pressure Plate : CF165552 CFT165552 Disc : 384148 384148 PP & Disc : 1971.

700140 11

NOTE: 2PCS REAR MAIN. 168 TOOTH. 12" HEAVY DUTY UPGRADE Pressure Plate : Disc : DF382612 PP & Disc : DF612909 1971.

-

5.7L 350" ENG. 4 SPD

NOTE: 2PCS REAR MAIN. 168 TOOTH. Pressure Plate : CF165552 CFT165552 Disc : 384148 384148 PP & Disc : 1971.

-

1-1/8"-26

N1716 53010 43001

#2 Clutch Pattern

N1716 53010 43001

1-1/8"-10

0 IN/OZ

700100 900100 #2 Clutch Pattern

700120 900120 #2 Clutch Pattern

N1086 53010 N1086 53010 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

32

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Dual Friction DF Disc DF PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Counterbalance T.O.B. Align Tool Pilot Bearing

CHEVROLET EL CAMINO, MONTE CARLO, CHEVELLE, MALIBU, MALIBU SS - Continued 8 CYLINDER 1979.

4.4L 267" ENG.

10.4

NOTE: 2PC REAR MAIN. 153 TOOTH Pressure Plate : CF361675 CFT361675 Disc : 383271 383271 PP & Disc : -

DF383271 DF271675

11361739 23383271 01271739

LM361675 LM383271 LM271675

NOTE: 2PC REAR MAIN. 168 TOOTH Pressure Plate : CF361675 CFT361675 Disc : 383271 383271 PP & Disc : -

DF383271 DF271675

11361739 23383271 01271739

LM361675 LM383271 LM271675

1979. - 1981.

5.0L 305" ENG.

700100 900100 #2 Clutch Pattern

700120 900120

10.4

NOTE: 2PC REAR MAIN. 153 TOOTH Pressure Plate : CF361675 CFT361675 Disc : 383271 383271 PP & Disc : -

DF383271 DF271675

11361739 23383271 01271739

LM361675 LM383271 LM271675

NOTE: 2PC REAR MAIN. 168 TOOTH Pressure Plate : CF361675 CFT361675 Disc : 383271 383271 PP & Disc : -

DF383271 DF271675

11361739 23383271 01271739

LM361675 LM383271 LM271675

1-1/8"-10

0 IN/OZ N1716 53010 43001

#2 Clutch Pattern

N1716 53010 43001

1-1/8"-10

0 IN/OZ

700100 900100 #2 Clutch Pattern

700120 900120 #2 Clutch Pattern

N1716 53010 43001 N1716 53010 43001

CHEVROLET - CRATE ENGINES CRATE ENGINES 8 CYLINDER 5.7L 350" HO, RAM JET & ZZ4 NOTE: PUSH TYPE CLUTCH Pressure Plate : Disc : PP & Disc : -

CFT361739 383271 -

10.4 DF383271 DF271739

11361739 23383271 01271739

LM361675 LM383271 LM271675

5.7L 350" HO, RAM JET & ZZ4 NOTE: PUSH TYPE CLUTCH Pressure Plate : Disc : PP & Disc : -

CFT361739 384161 -

11361739 23384161 01161739

CFT165552 383735 -

DF383735 DF735552

11165552 23383735 01735552

CFT165552 384148 -

DF384148 DF148552

11165552 23384148 01148552

CFT361909 384024 -

DF384024 DF024909

-

-

#3 Clutch Pattern

-

DF382612 DF612909

-

#3 Clutch Pattern

-

5.7L 350" HO, RAM JET & ZZ4 NOTE: PUSH TYPE CLUTCH USE WITH T5 86-92 F BODY TRANS Pressure Plate : CFT360056 Disc : 384161 DF384161 PP & Disc : DF161056

11360056 23384161 01161056

#3 Clutch Pattern

-

-

1-1/8"-26 -

10.4

-

1-1/8-10 -

12

-

1-1/8"-26 -

12

5.7L 350" HO, RAM JET & ZZ4 NOTE: PUSH TYPE CLUTCH Pressure Plate : Disc : PP & Disc : -

#3 Clutch Pattern

LM165552 LM384148 LM148552

-

1-1/8-10 -

11

5.7L 350" HO, RAM JET & ZZ4 NOTE: PUSH TYPE CLUTCH Pressure Plate : Disc : PP & Disc : -

#2 Clutch Pattern

LM165552 LM383735 LM735552

-

1-1/8"-26 -

11

5.7L 350" HO, RAM JET & ZZ4 NOTE: PUSH TYPE CLUTCH Pressure Plate : Disc : PP & Disc : -

#2 Clutch Pattern

LM361675 LM384161 LM161675

5.7L 350" HO, RAM JET & ZZ4 NOTE: PUSH TYPE CLUTCH Pressure Plate : Disc : PP & Disc : -

-

10.4 DF384161 DF161739

1-1/8"-10

-

1-1/8-26 #2 Clutch Pattern

-

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

33

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Dual Friction DF Disc DF PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Counterbalance T.O.B. Align Tool Pilot Bearing

CHEVROLET - CRATE ENGINES CRATE ENGINES - Continued 8 CYLINDER 5.7L 350" HO, RAM JET & ZZ4

11

NOTE: PULL TYPE CLUTCH USE WITH 89-93 ZF 6 SPD TRANS Pressure Plate : Disc : DF381039 PP & Disc : DF039000

11361000 23381039 01039000

-

NOTE: PULL TYPE CLUTCH USE WITH 94-96 ZF 6 SPD TRANS Pressure Plate : Disc : DF381039 PP & Disc : DF039130

11361130 23381039 01039130

-

5.7L 350' HO, RAM JET & ZZ4 11361020 23381039 01039020

6.2L 376" & 7.4L 454" LSA & LSX, 8 BOLT CRANK NEW! NOTE: PUSH TYPE CLUTCH Pressure Plate : Disc : DF382612 PP & Disc : DF612010

CFT361739 383271 -

CFT361739 384161 -

DF383271 DF271739

DF384161 DF161739

NOTE: PUSH TYPE CLUTCH USE WITH T5 86-92 F BODY TRANS Pressure Plate : CFT360056 Disc : 384161 DF384161 PP & Disc : DF161056

-

CFT165552 383735 -

11361739 23383271 01271739

DF383735 DF735552

CFT165552 384148 -

DF384148 DF148552

CFT361909 384024 -

LM361675 LM384161 LM161675

11360056 23384161 01161056

-

-

11165552 23384148 01148552

#2 Clutch Pattern

#2 Clutch Pattern

#3 Clutch Pattern

-

#3 Clutch Pattern

-

DF382612 DF612909

-

#3 Clutch Pattern

-

6.3L 383" HT, ZZ383 & 385" FAST BURN 11361020 23381039 01039020

#3 Clutch Pattern

-

-

-

-

-

1-1/8"-26 -

11

-

1-1/8-10 -

12

53026 43003

1-1/8"-26 -

12

0 IN/OZ

1-1/8-10 -

LM165552 LM384148 LM148552

INCLUDED -

1-1/8-26 -

11

DF384024 DF024909

NOTE: PULL TYPE CLUTCH USE WITH T56 6 SPD TRANS Pressure Plate : Disc : DF381039 PP & Disc : DF039020

#2 Clutch Pattern

LM165552 LM383735 LM735552

INCLUDED -

1-1/8-10 -

11

6.3L 383" HT, ZZ383 & 385" FAST BURN NOTE: PUSH TYPE CLUTCH Pressure Plate : Disc : PP & Disc : -

#14 Clutch Pattern

11361739 23384161 01161739

11165552 23383735 01735552

1-1/8"-26 700144 -

10.4

6.3L 383" HT, ZZ383 & 385" FAST BURN NOTE: PUSH TYPE CLUTCH Pressure Plate : Disc : PP & Disc : -

#24 Clutch Pattern

LM361675 LM383271 LM271675

INCLUDED -

1-1/8-26 -

10.4

6.3L 383" HT, ZZ383 & 385" FAST BURN NOTE: PUSH TYPE CLUTCH Pressure Plate : Disc : PP & Disc : -

#24 Clutch Pattern

-

6.3L 383" HT, ZZ383 & 385" FAST BURN NOTE: PUSH TYPE CLUTCH Pressure Plate : Disc : PP & Disc : -

-

12

6.3L 383" HT, ZZ383 & 385" FAST BURN NOTE: PUSH TYPE CLUTCH Pressure Plate : Disc : PP & Disc : -

#24 Clutch Pattern

-

6.3L 383" HT, ZZ383 & 385" FAST BURN NOTE: PUSH TYPE CLUTCH Pressure Plate : Disc : PP & Disc : -

-

11

NOTE: PULL TYPE CLUTCH USE WITH T56 6SPD TRANS Pressure Plate : Disc : DF381039 PP & Disc : DF039020

1-1/8-26

-

1-1/8-26 #24 Clutch Pattern

INCLUDED -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

34

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Dual Friction DF Disc DF PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Counterbalance T.O.B. Align Tool Pilot Bearing

CHEVROLET - CRATE ENGINES CRATE ENGINES - Continued 8 CYLINDER 6.3L 383" HT, ZZ383 & 385" FAST BURN

11

NOTE: PULL TYPE CLUTCH USE WITH 94-96 ZF 6 SPD TRANS Pressure Plate : Disc : DF381039 PP & Disc : DF039130

11361130 23381039 01039130

-

NOTE: PULL TYPE CLUTCH USE WITH 89-93 ZF 6 SPD TRANS Pressure Plate : Disc : DF381039 PP & Disc : DF039000

11361000 23381039 01039000

-

#24 Clutch Pattern

#24 Clutch Pattern

7.4L 454" HO ZZ454 & 8.2L 502" HO ZZ502 NOTE: PUSH TYPE CLUTCH Pressure Plate : Disc : PP & Disc : -

-

12

DF384024 DF024909

-

-

#24 Clutch Pattern

-

12

DF382612 DF612909

-

-

#3 Clutch Pattern

NOTE: PUSH TYPE CLUTCH Pressure Plate : Disc : PP & Disc : -

-

11

DF383735 DF735552

11165552 23383735 01735552

LM165552 LM383735 LM735552

7.4L 454" HO ZZ454 & 8.2L 502" HO ZZ502 NOTE: PUSH TYPE CLUTCH Pressure Plate : Disc : PP & Disc : -

-

DF384148 DF148552

11165552 23384148 01148552

9.4L 572" ZZ572 NOTE: PUSH TYPE CLUTCH Pressure Plate : Disc : PP & Disc : -

-

DF382612 DF612909

-

#3 Clutch Pattern

-

-

#3 Clutch Pattern

-

11165552 23384148 01148552

LM165552 LM384148 LM148552

DF201902

-

-

-

-

1-1/8"-26 -

11

-

1-1/8"-26 -

12

9.4L 572" ZZ572 NOTE: PUSH TYPE CLUTCH Pressure Plate : Disc : PP & Disc : -

#3 Clutch Pattern

LM165552 LM384148 LM148552

-

1-1/8-10 -

11

INCLUDED -

1-1/8"-26 -

7.4L 454" HO ZZ454 & 8.2L 502" HO ZZ502

INCLUDED -

1-1/8-10 -

7.4L 454" HO ZZ454 & 8.2L 502" HO ZZ502 NOTE: PUSH TYPE CLUTCH Pressure Plate : Disc : PP & Disc : -

1-1/8-26

-

1-1/8-26 #3 Clutch Pattern

-

CHEVROLET LIGHT TRUCK, SUV & VAN ASTRO VAN 4 CYLINDER 1985. - 1989. Pressure Plate : Disc : PP & Disc :

2.5L 151" ENG. CF361902 384201 -

9-1/8 CFT361902 384201 -

1"-14 # Clutch Pattern

N1716 53006 -

6 CYLINDER 1986. - 1989.

4.3L 262" ENG.

11

NOTE: 1PC REAR MAIN, 23.4IN/OZ BAL. Pressure Plate : CF361877 CFT361877 Disc : 384212 384212 PP & Disc : -

-

-

-

1"-14 700160 #3 Clutch Pattern

23.4 IN/OZ N1716 53006 -

C, G, K, P, R, V, 10-30 SERIES, FULL SIZE BLAZER, SUBURBAN, SILVERADO, TAHOE 4 CYLINDER 1963. - 1965. Pressure Plate : Disc : PP & Disc :

2.5L 153" ENG. CF361874 383271 -

10.4 CFT361874 383271 -

DF383271 DF271874

-

-

1-1/8"-10 # Clutch Pattern

N1086 53010 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

35

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Dual Friction DF Disc DF PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Counterbalance T.O.B. Align Tool Pilot Bearing

CHEVROLET LIGHT TRUCK, SUV & VAN C, G, K, P, R, V, 10-30 SERIES, FULL SIZE BLAZER, SUBURBAN, SILVERADO, TAHOE - Continued 6 CYLINDER

1963. - 1968. Pressure Plate : Disc : PP & Disc : 1963. - 1976.

4.7L 292" ENG. CF165473 383735 -

11 CFT165473 383735 -

DF383735 DF735473

-

-

194" 230" 250" ENG.

NOTE: 11" OPTION Pressure Plate : CF165473 Disc : 383735 PP & Disc : -

CFT165473 383735 -

-

-

1969. - 1984. Pressure Plate : Disc : PP & Disc :

4.7L 292" ENG. CF165552 383735 -

1970. Pressure Plate : Disc : PP & Disc :

3.8L 230" ENG. HEAVY DUTY CF361909 CFT361909 384024 384024 -

1977. - 1978. Pressure Plate : Disc : PP & Disc :

4.1L 250" ENG. CF165552 383735 -

1979. - 1984. Pressure Plate : Disc : PP & Disc :

4.1L 250" ENG. 3 SPD. CF165552 CFT165552 383735 383735 -

1981. - 1984. Pressure Plate : Disc : PP & Disc :

4.1L 250" ENG. 4 SPD CF361909 CFT361909 384024 384024 -

DF384024 DF024909

-

-

1985. - 1991. Pressure Plate : Disc : PP & Disc :

4.8L 292" ENG. CF361877 383735 -

DF383735 DF735877

-

-

1985. - 1995.

4.3L 262" ENG.

CFT165552 383735 -

CFT165552 383735 -

DF383735 DF735552

11165552 23383735 01735552

# Clutch Pattern

11 LM165552 LM383735 LM735552 12

DF384024 DF024909 DF383735 DF735552 DF383735 DF735552

-

-

11165552 23383735 01735552 11165552 23383735 01735552

11 LM165552 LM383735 LM735552 12

-

DF383735 DF188450

-

1-1/8"-10 # Clutch Pattern

1-1/8"-10 # Clutch Pattern

1-1/8"-10 1-1/8"-10 1-1/8"-10 700160 #3 Clutch Pattern

11

NOTE: 1PC REAR MAIN, 23.4IN/OZ BAL. Pressure Plate : CF360450 CFT360450 Disc : 384188 384188 PP & Disc : -

1-1/8"-10 -

# Clutch Pattern

-

4.3L 262" ENG.

# Clutch Pattern

# Clutch Pattern

11 DF383735 DF735877

1-1/8"-10 -

# Clutch Pattern

11 LM165552 LM383735 LM735552

-

N1086 53010 -

1-1/8"-10 -

11 CFT361877 383735 -

NOTE: 1PC REAR MAIN, 23.4IN/OZ BAL. Pressure Plate : CF361877 CFT361877 Disc : 383735 383735 PP & Disc : 1996. - 1998.

# Clutch Pattern

11 DF383735 DF735473

1-1/8"-10 -

1-1/8"-10 700160 -

N1086 53010 N1716 53010 43001 N1716 53010 43001 N1716 53010 43001 N1716 53010 43001 N1716 53010 43001 N1716 53010 23.4 IN/OZ N1716 53010 23.4 IN/OZ

#3 Clutch Pattern

N1777 53010 -

1-1/8"-10

0 IN/OZ

8 CYLINDER 1962. - 1968.

4.6L 283" ENG. H.D.

NOTE: 2PC REAR MAIN. 168 TOOTH. Pressure Plate : CF361909 CFT361909 Disc : 384024 384024 PP & Disc : 1963. - 1968.

DF384024 DF024909

-

-

4.6L 283" ENG.

700120 900561 11

NOTE: 2PC REAR MAIN. 168 TOOTH. Pressure Plate : CF165552 CFT165552 Disc : 383735 383735 PP & Disc : 1967. - 1979.

12

DF383735 DF735552

11165552 23383735 01735552

LM165552 LM383735 LM735552

5.7L 350" ENG. w/ 11" CLUTCH

NOTE: 2PC REAR MAIN. 168 TOOTH. Pressure Plate : CF165552 CFT165552 Disc : 383735 383735 PP & Disc : -

11165552 23383735 01735552

1-1/8"-10

0 IN/OZ

700120 900120

11 DF383735 DF735552

#3 Clutch Pattern

N1716 53010 43001

LM165552 LM383735 LM735552

#3 Clutch Pattern

N1716 53010 43001

1-1/8"-10

0 IN/OZ

700120 900120 #3 Clutch Pattern

N1716 53010 43001

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

36

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Dual Friction DF Disc DF PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Counterbalance T.O.B. Align Tool Pilot Bearing

CHEVROLET LIGHT TRUCK, SUV & VAN C, G, K, P, R, V, 10-30 SERIES, FULL SIZE BLAZER, SUBURBAN, SILVERADO, TAHOE - Continued 8 CYLINDER 1967. - 1979.

5.7L 350" ENG. w/ 12" CLUTCH

NOTE: 2PC REAR MAIN. 168 TOOTH. Pressure Plate : CF361909 CFT361909 Disc : 384024 384024 PP & Disc : 1969. - 1973.

DF384024 DF024909

-

DF384024 DF024909

-

-

11165552 23383735 01735552

DF384148 DF148552

11165552 23384148 01148552

-

5.7L 350" ENG.

6.2L 381" DIESEL ENG. CF361909 CFT361909 384195 384195 -

5.0L 305" ENG. NEW! 1985. NOTE: 2PC REAR MAIN. 168 TOOTH. Pressure Plate : CF361877 CFT361877 Disc : 383735 383735 PP & Disc : -

DF384024 DF024909

-

-

-

11 DF383735 DF735877

-

-

33.0 IN/OZ

#3 Clutch Pattern

1-1/8"-10

0 IN/OZ

1-1/8"-26

1-1/8"-26

N1716 53010 43001 24.4 IN/OZ N1716 53026 43001 24.4 IN/OZ

#3 Clutch Pattern

N1716 53026 43001

1-1/8"-10

0 IN/OZ

#3 Clutch Pattern

N1716 53010 43001

1-1/8"-10

0 IN/OZ

#3 Clutch Pattern

-

N1716 53010 43001

N1716 53010 43001

700120 900561 12

DF384024 DF195909

1-1/8"-10

700120 900561 12

NOTE: 2PC REAR MAIN. 168 TOOTH. Pressure Plate : CF361909 CFT361909 Disc : 384024 384024 PP & Disc : 1982. - 1993. Pressure Plate : Disc : PP & Disc :

-

0 IN/OZ

700180 12

DF384024 DF024909

1-1/8"-10

#3 Clutch Pattern

-

5.0L 305" ENG.

#3 Clutch Pattern

N1716 53010 43001

700180 -

12 -

0 IN/OZ

#3 Clutch Pattern

LM165552 LM384148 LM148552

6.6L 400" ENG.

1-1/8"-10

700120 900120

11

NOTE: 2PC REAR MAIN. 168 TOOTH. Pressure Plate : CF361909 CFT361909 Disc : 384024 384024 PP & Disc : 1980. - 1985.

LM165552 LM383735 LM735552

6.6L 400" ENG.

#3 Clutch Pattern

N1716 53010 43001

700140 11

DF383735 DF735552

0 IN/OZ

#3 Clutch Pattern

-

5.0L 305" ENG w/3 SPD.

1-1/8"-10

700120 900561 12

DF384024 DF024909

#3 Clutch Pattern

700120 900561

-

0 IN/OZ N1716 53010 43001

700120 900120

-

7.4L 454" ENG.

NOTE: 2PCS REAR MAIN, 24.4 IN/OZ BAL. 12" HEAVY DUTY UPGRADE Pressure Plate : Disc : DF382612 PP & Disc : DF612909 1980. - 1984.

LM165552 LM383735 LM735552

12

NOTE: 2PCS REAR MAIN, 24.4 IN/OZ BAL. Pressure Plate : CF165552 CFT165552 Disc : 384148 384148 PP & Disc : 1978.

11165552 23383735 01735552

6.6L 402" ENG.

NOTE: 2PC REAR MAIN. 168 TOOTH. Pressure Plate : CF165552 CFT165552 Disc : 383735 383735 PP & Disc : 1978.

DF383735 DF735552

1-1/8"-10 700120 900561

12

NOTE: 2PCS REAR MAIN, 33.0IN/OZ BAL. Pressure Plate : CF361909 CFT361909 Disc : 384024 384024 PP & Disc : 1976. - 1979.

-

6.6L 396" ENG.

NOTE: 2PC REAR MAIN. 168 TOOTH. Pressure Plate : CF361909 CFT361909 Disc : 384024 384024 PP & Disc : 1973. - 1990.

-

11

NOTE: 2PC REAR MAIN. 168 TOOTH. Pressure Plate : CF361909 CFT361909 Disc : 384024 384024 PP & Disc : 1970. - 1973.

DF384024 DF024909

5.0L 307" ENG.

NOTE: 2PC REAR MAIN. 168 TOOTH. Pressure Plate : CF165552 CFT165552 Disc : 383735 383735 PP & Disc : 1969. - 1973.

12

1-1/8"-10 -

N1716 53010 43001

# Clutch Pattern

N1716 53010 -

1-1/8"-10

0 IN/OZ

700120 900120 #3 Clutch Pattern

N1716 53010 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

37

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Dual Friction DF Disc DF PP & Disc

Counterbalance T.O.B. Align Tool Pilot Bearing

CHEVROLET LIGHT TRUCK, SUV & VAN C, G, K, P, R, V, 10-30 SERIES, FULL SIZE BLAZER, SUBURBAN, SILVERADO, TAHOE - Continued 8 CYLINDER 1986. - 1995.

5.0L 305" ENG.

11

NOTE: 1PCS REAR MAIN 23.4 IN/OZ BAL. Pressure Plate : CF361877 CFT361877 Disc : 383735 383735 PP & Disc : NEW! 1986. - 1995. 5.7L 350" ENG. NOTE: 1PCS REAR MAIN 23.4 IN/OZ BAL. Pressure Plate : CF361909 CFT361909 Disc : 384024 384024 PP & Disc : -

DF383735 DF735877

-

DF384024 DF024909

-

-

1996. - 2000.

DF070310

-

-

# Clutch Pattern

-

DF028310

-

6.5L 396" DIESEL ENG. ( P-SERIES ONLY ) CF360310 CFT360310 381070 381070 DF070310

#3 Clutch Pattern

#3 Clutch Pattern

-

#3 Clutch Pattern

-

-

#3 Clutch Pattern

12 -

# Clutch Pattern

12 -

-

DF084025

-

# Clutch Pattern

*

-

23.4 IN/OZ N1716 53010 43001 42.5 IN/OZ N1716 53010 43001

N1716 53010 23.4 IN/OZ N1777 53010 23.4 IN/OZ N1777 53010 23.4 IN/OZ N1777 53010 N1777 53010 42.5 IN/OZ N1777 53010 -

N1777 53010 -

1-1/8"-10 -

11-7/8

N1716 53010 -

1-1/8"-10 -

6.5L 396" TURBO DIESEL ENG. w/DMF

4.8L 292" ENG. -

1-1/8"-10 700146 -

6.5L 396" TURBO DIESEL ENG w/o DMF

-

1-1/8"-10 # Clutch Pattern

12

-

1-1/8"-10 700161 -

7.4L 454" ENG. -

1-1/8"-10 700161 -

12 -

1-1/8"-10 700161 -

-

23.4 IN/OZ

1-1/8"-10 -

12

NOTE: (.217" FLYWHEEL STEP) EXC. P-SERIES, SOLID DISC HUB Pressure Plate : Disc : PP & Disc : DF875740 * 1999 - 2006 Pressure Plate : Disc : PP & Disc :

-

5.7L 350" ENG. NVG 4500 TRANS.

NOTE: SOLID FLYWHEEL ONLY, SPRUNG DISC HUB Pressure Plate : CF360055 CFT360055 Disc : 381075 381075 PP & Disc : DF075055 1996. - 2002.

#3 Clutch Pattern

12 DF097310

1-1/8"-10 700145 -

5.7L 350" ENG. NVG 3500 TRANS.

NOTE: 1PCS REAR MAIN/LG. FLANGE 42.5 IN/OZ BAL. Pressure Plate : CF360055 CFT360055 Disc : 381075 381075 PP & Disc : DF075055 1996. - 2002.

-

12

NOTE: 1PCS REAR MAIN 23.4 IN/OZ BAL. Pressure Plate : CF360310 CFT360310 Disc : 381028 381028 PP & Disc : 1996. - 2000. Pressure Plate : Disc : PP & Disc :

#3 Clutch Pattern

12 -

1-1/8"-10 700160 -

5.0L 305" ENG.

NOTE: 1PCS REAR MAIN 23.4 IN/OZ BAL. Pressure Plate : CF360310 CFT360310 Disc : 381097 381097 PP & Disc : 1996. - 2000.

-

6.5L 396" DIESEL & TURBO DIESEL

NOTE: 1PCS REAR MAIN 23.4 IN/OZ BAL. Pressure Plate : CF360310 CFT360310 Disc : 381070 381070 PP & Disc : 1996. - 2000.

#3 Clutch Pattern

12

NOTE: w/SOLID FLYW. OPTION, REF. GM BULLETIN #66-72-02-B Pressure Plate : Disc : PP & Disc : DF987983 1996. - 1998.

700160 12

NEW! 1991 - 1995. 7.4L 454" ENG. NOTE: 1PCS REAR MAIN/LG. FLANGE 42.5 IN/OZ BAL. Pressure Plate : CF361909 CFT361909 Disc : 384024 384024 DF384024 PP & Disc : DF024909 1992. - 1995.

-

1-1/8"-10

1-1/8"-10 # Clutch Pattern

N1777 53010 53010 43003

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

38

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Dual Friction DF Disc DF PP & Disc

Counterbalance T.O.B. Align Tool Pilot Bearing

CHEVROLET LIGHT TRUCK, SUV & VAN C, G, K, P, R, V, 10-30 SERIES, FULL SIZE BLAZER, SUBURBAN, SILVERADO, TAHOE - Continued 8 CYLINDER 2001 - 2007

6.0L ENG. OE DISC MAYBE 11 7/8"

NOTE: INCLUDES STEEL BILLET FLYWHEEL Pressure Plate : Disc : PP & Disc : -

12 DF997997

-

-

NOTE: ASSEMBLY REQUIRES CENTERFORCE FLYWHEEL. Pressure Plate : Disc : PP & Disc : DF240010

-

-

1-1/8"-10 INCLUDED # Clutch Pattern

700142 900142 #14 Clutch Pattern

0 IN/OZ 53010 43003 53010 43003

LUV 1980. Pressure Plate : Disc : PP & Disc :

1.8L LUV 10 4WD CF626512 CFT512626

1981. - 1982. Pressure Plate : Disc : PP & Disc :

1.8L LUV 11-12 CF626512

1981. - 1983. Pressure Plate : Disc : PP & Disc :

2.2L LUV 11-12 DIESEL CF626512 CFT512626

215 DF512626

2 & 4WD CFT512626

-

8-19/32 -

215 DF512626

-

# Clutch Pattern

8-19/32 -

215 -

-

DF201904

-

-

1"-24 # Clutch Pattern

8-19/32

DF512626

1"-24 -

1"-24 # Clutch Pattern

010 50001 010 50001 010 50001 -

S-10/T-10, S-10 BLAZER & PICK-UP 4 CYLINDER 1983. - 1984. Pressure Plate : Disc : PP & Disc :

2.0L 122" ENG. CF361904 384201 -

1985. - 1993. Pressure Plate : Disc : PP & Disc :

2.5L 151" ENG. CF361904 384201 -

9-1/8 CFT361904 384201 -

# Clutch Pattern

9-1/8 CFT361904 384201 -

1994. - 1995. Pressure Plate : Disc : PP & Disc :

2.2L 135" GM ENG. ONLY CFT361170 384120 -

1996. - 2003. Pressure Plate : Disc : PP & Disc :

2.2L 135" GM ENG. ONLY CFT361170 384120 -

DF201904

-

-

DF120170

-

*

-

DF120170

-

*

1-1/8"-26 # Clutch Pattern

9-1/8

*

1"-14 # Clutch Pattern

9-1/8

*

1"-14 -

-

1-1/8"-26 # Clutch Pattern

N1716 53006 N1716 53006 N1716 53026 N1777 53026 -

6 CYLINDER 1982. - 1984.

2.8L 171" ENG.

9-1/8

NOTE: O.E. CLUTCH DISC MAY BE 9-11/16" Pressure Plate : CF361900 Disc : 384201 PP & Disc : 1985. - 1993. Pressure Plate : Disc : PP & Disc :

2.8L 171" ENG. CF361904 384201 -

1990. - 1995.

4.3L 262" ENG.

DF201900

-

-

# Clutch Pattern

9-1/8 CFT361904 384201 -

DF201904

-

-

DF383735 DF735877

-

1"-14 # Clutch Pattern

11

NOTE: 1PC REAR MAIN, 23.4IN/OZ BAL. Pressure Plate : CF361877 CFT361877 Disc : 383735 383735 PP & Disc : -

1"-14

-

1-1/8"-10 700160 #3 Clutch Pattern

N1716 53006 N1716 53006 23.4 IN/OZ N1716 53010 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

39

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Dual Friction DF Disc DF PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Counterbalance T.O.B. Align Tool Pilot Bearing

CHEVROLET LIGHT TRUCK, SUV & VAN S-10/T-10, S-10 BLAZER & PICK-UP - Continued 6 CYLINDER 1994. - 1995.

4.3L 262" HIGH OUTPUT L35 ENG.

NOTE: 1PC REAR MAIN, 23.4IN/OZ BAL. Pressure Plate : CF165552 CFT165552 Disc : 383735 383735 PP & Disc : 1996. - 2004.

11 DF383735 DF735552

-

-

4.3L 262" ENG.

700160 #3 Clutch Pattern

11

NOTE: 1PC REAR MAIN, 23.4IN/OZ BAL. Pressure Plate : CF360450 CFT360450 Disc : 384188 384188 PP & Disc : -

DF383735 DF188450

-

1-1/8"-10

-

1-1/8"-10 700160 -

23.4 IN/OZ N1716 53010 43001 23.4 IN/OZ

#3 Clutch Pattern

N1777 53010 -

1-1/8"- 26

0 IN/OZ

SSR 8 CYLINDER 2005 - 2006

6.0L LS2 ENG OE DMF

12

NOTE: THIS APPLICATION REQUIRES CENTERFORCE FLYWHEEL - SEE FLYWHEEL SECTION. Pressure Plate : Disc : DF382612 PP & Disc : DF612010 -

-

NOTE: THIS APPLICATION INCLUDES CENTERFORCE FLYWHEEL. Pressure Plate : Disc : DF382612 PP & Disc : DF612142

-

-

900143 #14 Clutch Pattern

INCLUDED #14 Clutch Pattern

53026 43003 INCLUDED INCLUDED INCLUDED

CHRYSLER CIRRUS 4 CYLINDER 1995. - 2001.

2.0L ENG.

9

NOTE: MODULAR CLUTCH - INCLUDES FLYWHEEL Pressure Plate : Disc : PP & Disc : DF325417

-

-

DF014040

11014040 23014040 01014040

-

DF014040

11014040 23014040 01014040

-

15/16"-17 # Clutch Pattern

4166 -

LASER 4 CYLINDER 1984. - 1987. Pressure Plate : Disc : PP & Disc :

2.2L & 2.5L 135" ENG. w/TURBO, I CF360040 CFT360040 381014 381014 -

9

13/16"-18 # Clutch Pattern

N1728 51001 -

LEBARON 4 CYLINDER 1982. - 1989. Pressure Plate : Disc : PP & Disc :

2.2L 135" ENG. TURBO I CF360040 CFT360040 381014 381014 -

9

1984. - 1985. Pressure Plate : Disc : PP & Disc :

2.6L 156" ENG. TURBO CF360040 CFT360040 381014 381014 -

1986. - 1989. Pressure Plate : Disc : PP & Disc :

2.5L 153" ENG. CF360040 381014 -

DF014040

11014040 23014040 01014040

-

1986. - 1990. Pressure Plate : Disc : PP & Disc :

2.2L 135" ENG. INTERCOOLER TURBO II CF360040 CFT360040 381014 381014 DF014040

11014040 23014040 01014040

-

1989. - 1990. Pressure Plate : Disc : PP & Disc :

2.5L 153" ENG. TURBO & NON-TURBO CF360040 CFT360040 381014 381014 DF014040

# Clutch Pattern

9 DF014040

11014040 23014040 01014040

-

13/16"-18 # Clutch Pattern

9

13/16"-18 # Clutch Pattern

9 11014040 23014040 01014040

13/16"-18 # Clutch Pattern

9 CFT360040 381014 -

13/16"-18 -

-

13/16"-18 # Clutch Pattern

N1728 51001 N1728 51001 N1728 51001 N1728 51001 N1728 51001 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

40

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Dual Friction DF Disc DF PP & Disc

Counterbalance T.O.B. Align Tool Pilot Bearing

CHRYSLER LEBARON - Continued 4 CYLINDER

1991. - 1992. Pressure Plate : Disc : PP & Disc :

2.2L 135" ENG. TURBO IV CFT360066 381099 -

1991. - 1994. Pressure Plate : Disc : PP & Disc :

2.5L 153" ENG. CF360040 381099 -

1991. - 1994. Pressure Plate : Disc : PP & Disc :

2.5L 153" ENG. TURBO CF360040 CFT360040 381099 381099 -

9 DF049066

-

-

# Clutch Pattern

9 CFT360040 381099 -

DF045040

-

-

-

-

DF014040

11014040 23014040 01014040

-

15/16"-17 # Clutch Pattern

9 DF099040

15/16"-17 -

15/16"-17 # Clutch Pattern

N1728 51002 N1728 51002 N1728 51002 -

6 CYLINDER 1990. Pressure Plate : Disc : PP & Disc :

3.0L 185" ENG. CF360040 381014 -

1991. - 1994. Pressure Plate : Disc : PP & Disc :

3.0L 185" ENG. CF360040 381099 -

9 CFT360040 381014 -

# Clutch Pattern

9 CFT360040 381099 -

DF099040

-

13/16"-18 -

-

15/16"-17 # Clutch Pattern

N1728 51001 N1728 51002 -

PT CRUISER 4 CYLINDER 2000. - 2006.

2.4L ENG.

9

NOTE: MODULAR CLUTCH - INCLUDES FLYWHEEL Pressure Plate : Disc : PP & Disc : DF325450 2003. - 2007.

-

-

2.4L TURBO ENG. w/ DMF

NOTE: SOLID DISC HUB Pressure Plate : Disc : PP & Disc : -

-

# Clutch Pattern

9-7/16 DF340340

-

*

15/16"-17

-

-

1-18/"-26 # Clutch Pattern

-

SEBRING 4 CYLINDER 1995. - 2001.

2.0L 120" ENG.

9

NOTE: MODULAR CLUTCH - INCLUDES FLYWHEEL Pressure Plate : Disc : PP & Disc : DF325417 2.4L 146" ENG. NEW! 2001 - 2005 NOTE: 8TH DIGIT OF VIN # G Pressure Plate : CF010536 * Disc : PP & Disc : -

-

225

-

DF536010

*

11010635 23536010 01536010

* *

15/16"-17 # Clutch Pattern

8-7/8 -

4166 -

7/8-20 # Clutch Pattern

210 50080 -

SEBRING CONVERTIBLE 4 CYLINDER 1997.

2.4L 146" ENG.

9

NOTE: MODULAR CLUTCH - INCLUDES FLYWHEEL Pressure Plate : Disc : PP & Disc : DF325417

-

-

15/16"-17 # Clutch Pattern

4166 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

41

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Dual Friction DF Disc DF PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Counterbalance T.O.B. Align Tool Pilot Bearing

DODGE AVENGER 4 CYLINDER 1995. - 1999.

2.0L120" ENG.

9

NOTE: MODULAR CLUTCH - INCLUDES FLYWHEEL Pressure Plate : Disc : PP & Disc : DF325417

-

-

15/16"-17 # Clutch Pattern

4166 -

DART, DIPLOMAT, DEMON, GTS, SUPER BEE, ASPEN, CHALLENGER, CHARGER, CORONET 8 CYLINDER NEW! 1961. - 1963. Pressure Plate : Disc : PP & Disc :

5.2L 318" ENG. -

CFT361675 383269 -

6.3L 383" ENG. EXC H.D. NEW! 1963. NOTE: ***41001 IS PILOT BUSHING*** Pressure Plate : CFT361739 Disc : 383269 PP & Disc : 1963. - 1969.

-

10.4 LM361675 LM383269 LM269675 10.4

DF383269 DF269739

11361739 23383269 01269739

LM361675 LM383269 LM269675

7.0L 426" ENG. w/11" CLUTCH

NOTE: 143 TOOTH. 8 BOLT CRANK. Pressure Plate : CFT361800 Disc : 384071 PP & Disc : 1964. - 1969.

DF383269 DF269675

11165552 23384071 01071800

LM165552 LM384071 LM071800

6.3L 383" ENG. EXC H.D. DF383269 DF269739

11361739 23383269 01269739

LM361675 LM383269 LM269675

NOTE: 143 TOOTH. ***41001 IS PILOT BUSHING*** Pressure Plate : CFT361739 Disc : 383269 PP & Disc : -

DF383269 DF269739

11361739 23383269 01269739

LM361675 LM383269 LM269675

1964. - 1978.

5.2L 318" ENG.

#2 Clutch Pattern

-

LM361675 LM383269 LM269675

NOTE: 143 TOOTH Pressure Plate : Disc : PP & Disc : -

CFT361675 383269 -

DF383269 DF269675

-

LM361675 LM383269 LM269675

-

10.4 LM361675 LM383269 LM269675

1967. - 1969.

7.2L 440" ENG. w/11" CLUTCH

NOTE: 6 BOLT CRANK. Pressure Plate : Disc : PP & Disc : -

CFT361800 384071 -

NOTE: HEMI & WEDGE ENG w/8 BOLT CRANK. Pressure Plate : CFT361800 Disc : 384071 PP & Disc : 1968. - 1972.

DF383269 DF269675

11165552 23384071 01071800

LM165552 LM384071 LM071800

DF384071 DF071800

11165552 23384071 01071800

LM165552 LM384071 LM071800

5.6L 340" ENG.

#2 Clutch Pattern

700420 #2 Clutch Pattern

DF383269 DF269739

11361739 23383269 01269739

1"-23 # Clutch Pattern

1-3/16"-18 700420 #3 Clutch Pattern

700440 #3 Clutch Pattern

10.4

NOTE: 130 TOOTH. ***41001 IS PILOT BUSHING*** Pressure Plate : CFT361739 Disc : 383269 PP & Disc : -

1"-23 700400 900400

11 DF384071 DF071800

1"-23

700420 -

10.4

CFT361675 383269 -

0 IN/OZ

#2 Clutch Pattern

DF383269 DF269675

4.5L 273" ENG. -

1-3/16-18

700400 900400

CFT361675 383269 -

1965. - 1969. Pressure Plate : Disc : PP & Disc :

#2 Clutch Pattern

N1463 51023 41001

#3 Clutch Pattern

NOTE: 130 TOOTH Pressure Plate : Disc : PP & Disc : -

LM361675 LM383269 LM269675

N1463 51023 -

1"-23

700440 -

10.4

NOTE: 130 TOOTH. ***41001 IS PILOT BUSHING*** Pressure Plate : CFT361739 Disc : 383269 PP & Disc : -

#2 Clutch Pattern

-

11 DF384071 DF071800

1"-23 -

1"-23 700400 900400 #2 Clutch Pattern

N1703 51018 0 IN/OZ N1463 51023 41001 N1463 51023 41001 0 IN/OZ N1463 51023 N1463 51023 N1463 51023 0 IN/OZ N1703 51018 N1703 51018 0 IN/OZ N1463 51023 41001

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

42

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Dual Friction DF Disc DF PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Counterbalance T.O.B. Align Tool Pilot Bearing

DODGE DART, DIPLOMAT, DEMON, GTS, SUPER BEE, ASPEN, CHALLENGER, CHARGER, CORONET - Continued 8 CYLINDER

NEW! 1968. - 1972. 5.6L 340" ENG. NOTE: 143 TOOTH. ***41001 IS PILOT BUSHING*** Pressure Plate : CFT361739 Disc : 383269 PP & Disc : 1969.

10.4 DF383269 DF269739

11361739 23383269 01269739

6.3L 383" ENG. H.D. ONLY w/11" CLUTCH

NOTE: 143 TOOTH Pressure Plate : Disc : PP & Disc : -

CFT361800 384070 -

DF384070 DF070800

11165552 23384070 01070800

-

-

-

NOTE: 143 TOOTH. 6 BOLT CRANK. 10.5" BOLT PATTERN Pressure Plate : Disc : DF381810 PP & Disc : DF810739

11361739 23381810 01810739

-

NOTE: 143 TOOTH. HEMI & WEDGE ENG w/8 BOLT CRANK. 10.5" BOLT PATTERN Pressure Plate : 11361739 Disc : DF381810 23381810 PP & Disc : DF810739 01810739

-

7.2L 440" ENG. w/10.95" CLUTCH

NOTE: 130 TOOTH. 6 BOLT CRANK. 10.5" BOLT PATTERN Pressure Plate : Disc : DF384175 PP & Disc : DF175810

11361911 23384175 01175810

-

NOTE: 143 TOOTH. 6 BOLT CRANK. 10.5" BOLT PATTERN Pressure Plate : Disc : DF384175 PP & Disc : DF175810

11361911 23384175 01175810

-

NOTE: 143 TOOTH. HEMI & WEDGE ENG w/8 BOLT CRANK. 10.5" BOLT PATTERN Pressure Plate : 11361911 Disc : DF384175 23384175 PP & Disc : DF175810 01175810

-

0 IN/OZ

#2 Clutch Pattern

N1703 51018 -

1-3/16"-18

0 IN/OZ

700440 1-3/16"-18

0 IN/OZ

700420 #2 Clutch Pattern

700440 #2 Clutch Pattern

LM361675 LM383269 LM269675

NOTE: 143 TOOTH. ***41001 IS PILOT BUSHING*** Pressure Plate : CFT361739 Disc : 383269 PP & Disc : -

DF383269 DF269739

11361739 23383269 01269739

LM361675 LM383269 LM269675

1"-23 700460 #2 Clutch Pattern

700450 #2 Clutch Pattern

10.4 LM361675 LM383269 LM269675

N1703 51018 -

#2 Clutch Pattern

#2 Clutch Pattern

11361739 23383269 01269739

N1703 51018 -

N1703 51018 -

700400 900400

DF383269 DF269739

11361739 23383269 01269739

1-3/16"-18

#2 Clutch Pattern

NOTE: 130 TOOTH. ***41001 IS PILOT BUSHING*** Pressure Plate : CFT361739 Disc : 383269 PP & Disc : -

DF383269 DF269739

#2 Clutch Pattern

N1703 51018 -

700420 -

10.4

NEW! 1972. - 1974. 6.6L 400" ENG. NOTE: 130 TOOTH. ***41001 IS PILOT BUSHING*** Pressure Plate : CFT361739 Disc : 383269 PP & Disc : -

0 IN/OZ

#2 Clutch Pattern

5.9L 360" ENG.

0 IN/OZ

1-3/16"-18

700400 900400

10-15/16

N1463 51023 41001

#3 Clutch Pattern

700440 10.5

0 IN/OZ

N1463 51023 -

700440 10-15/16

11361739 23381810 01810739

1"-23 700420 -

10.5

NEW! 1970. - 1972. 7.2L 440" ENG. w/10.5" CLUTCH NOTE: 130 TOOTH. 6 BOLT CRANK. 10.5" BOLT PATTERN Pressure Plate : Disc : DF381810 PP & Disc : DF810739

1971.

#2 Clutch Pattern

LM165552 LM384070 LM070552

7.0L 426" ENG. w/10.95" CLUTCH

NOTE: 143 TOOTH. HEMI & WEDGE ENG w/8 BOLT CRANK. 10.5" BOLT PATTERN Pressure Plate : 11361911 Disc : DF384175 23384175 PP & Disc : DF175810 01175810

1970. - 1972.

700420 -

11

NEW! 1970. - 1971. 7.0L 426" ENG. w/10.5" CLUTCH NOTE: 143 TOOTH. HEMI & WEDGE ENG w/8 BOLT CRANK. 10.5" BOLT PATTERN Pressure Plate : 11361739 Disc : DF381810 23381810 PP & Disc : DF810739 01810739 1970. - 1971.

LM361675 LM383269 LM269675

1"-23

1"-23 700400 900400 #2 Clutch Pattern

N1703 51018 N1703 51018 N1703 51018 19.8 IN/OZ N1463 51023 41001 N1463 51023 41001 0 IN/OZ N1463 51023 41001

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

43

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Dual Friction DF Disc DF PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Counterbalance T.O.B. Align Tool Pilot Bearing

DODGE DART, DIPLOMAT, DEMON, GTS, SUPER BEE, ASPEN, CHALLENGER, CHARGER, CORONET - Continued 8 CYLINDER 1974.

5.9L 360" ENG.

10.4

NOTE: 130 TOOTH. ***41001 IS PILOT BUSHING*** Pressure Plate : CFT361739 Disc : 383269 PP & Disc : -

DF383269 DF269739

11361739 23383269 01269739

LM361675 LM383269 LM269675

NOTE: 143 TOOTH. ***41001 IS PILOT BUSHING*** Pressure Plate : CFT361739 Disc : 383269 PP & Disc : -

DF383269 DF269739

11361739 23383269 01269739

LM361675 LM383269 LM269675

1"-23 700460 #2 Clutch Pattern

700450 #2 Clutch Pattern

19.8 IN/OZ N1463 51023 41001 N1463 51023 41001

DAYTONA, IROC, SHADOW, SPIRIT, 400, 600, ARIES, LANCER 4 CYLINDER 1984. - 1989. Pressure Plate : Disc : PP & Disc :

2.2L 135" ENG. TURBO I & TURBO II CF360040 CFT360040 381014 381014 -

1986. - 1990. Pressure Plate : Disc : PP & Disc :

2.5L 153" ENG. NON-TURBO CF360040 CFT360040 381014 381014 -

1989. - 1990. Pressure Plate : Disc : PP & Disc :

2.5L 153" ENG. TURBO CF360040 CFT360040 381014 381014 -

1991. - 1993. Pressure Plate : Disc : PP & Disc :

2.2L 135" ENG. TURBO III & IV CFT360066 381099 -

9 DF014040

11014040 23014040 01014040

-

11014040 23014040 01014040

-

DF014040

11014040 23014040 01014040

-

-

-

2.5L 153" ENG. CF360040 381099 -

CFT360040 381099 -

DF045040

-

-

1991. - 1994. Pressure Plate : Disc : PP & Disc :

2.5L 153" ENG. TURBO CF360040 CFT360040 381099 381099 -

DF099040

-

-

DF014040

11014040 23014040 01014040

-

15/16"-17 # Clutch Pattern

9 -

15/16"-17 # Clutch Pattern

9

DF049066

15/16"-17 # Clutch Pattern

9

2.2L 135" ENG. TURBO III IROC CFT360066 381099 -

13/16"-18 # Clutch Pattern

9 DF049066

13/16"-18 # Clutch Pattern

9

1991. - 1994. Pressure Plate : Disc : PP & Disc :

1992. - 1993. Pressure Plate : Disc : PP & Disc :

# Clutch Pattern

9 DF014040

13/16"-18 -

15/16"-17 # Clutch Pattern

N1728 51001 N1728 51001 N1728 51001 N1728 51002 N1728 51002 N1728 51002 N1728 51002 -

6 CYLINDER 1990. Pressure Plate : Disc : PP & Disc :

3.0L 185" ENG. CF360040 381014 -

1991. - 1994. Pressure Plate : Disc : PP & Disc :

3.0L 185" ENG. CF360040 381099 -

9 CFT360040 381014 -

# Clutch Pattern

9 CFT360040 381099 -

DF099040

-

13/16"-18 -

-

15/16"-17 # Clutch Pattern

N1728 51001 N1728 51002 -

NEON 4 CYLINDER 1994. - 1995

2.0L SOHC & DOHC

NOTE: O.E. CLUTCH DISC MAY BE 8-1/2" Pressure Plate : CF361973 Disc : 381973 PP & Disc : -

9 DF973973

11973973 23973973 01973973

-

15/16"-17 # Clutch Pattern

4166 51002 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

44

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Dual Friction DF Disc DF PP & Disc

Counterbalance T.O.B. Align Tool Pilot Bearing

DODGE NEON - Continued 4 CYLINDER 1996. - 1999.

2.0L 120" ENG.

9

NOTE: MEXICO BUILT. The 11th Digit of the VIN# is "T" O.E. CLUTCH DISC MAY BE 8-1/2" Pressure Plate : CF361973 11973973 Disc : 381973 23973973 PP & Disc : DF973973 01973973 1996. - 2005.

-

# Clutch Pattern

2.0L 120" ENG.

9

NOTE: USA BUILT. The 11th Digit of the VIN# is "D" MODULAR CLUTCH - INCLUDES FLYWHEEL Pressure Plate : Disc : PP & Disc : DF325417 2003. - 2005.

2.4L SRT-4 TURBO w/5 Spd -

-

11014040 23014040 01014040

-

*

4166 51002 -

15/16"-17 # Clutch Pattern

9-7/16

NOTE: MODULAR CLUTCH - INCLUDES FLYWHEEL Pressure Plate : Disc : PP & Disc : DF037672

15/16"-17

4166 -

15/16"-17 # Clutch Pattern

4173 -

OMNI 4 CYLINDER 1984. - 1988. Pressure Plate : Disc : PP & Disc :

2.2L 135" ENG. w/TURBO CF360040 CFT360040 381014 381014 -

9 DF014040

13/16"-18 # Clutch Pattern

N1728 51001 -

STRATUS 4 CYLINDER 1995. - 2001.

2.0L ENG.

9

NOTE: MODULAR CLUTCH - INCLUDES FLYWHEEL Pressure Plate : Disc : PP & Disc : DF325417 2001. - 2005. Pressure Plate : Disc : PP & Disc :

2.4L ENG. VIN G CF010536 *

-

225

-

DF536010

-

8.0L & 8.3L V10 ENG. -

DF985985

-

-

DF014040

11014040 23014040 01014040

-

*

# Clutch Pattern

8-7/8

-

15/16"-17

7/8"-20 # Clutch Pattern

4166 210 -

VIPER 10 CYLINDER 1992. - 2006. Pressure Plate : Disc : PP & Disc :

12-1/4

1-1/8"-26 # Clutch Pattern

N1754 51075 41003

DODGE LIGHT TRUCK, SUV & VAN CARAVAN 4 CYLINDER 1983. - 1986. Pressure Plate : Disc : PP & Disc :

2.6L 160" ENG. CF360040 381014 -

9

1983. - 1988. Pressure Plate : Disc : PP & Disc :

2.2L 135" ENG. CF360040 381014 -

1986. - 1989. Pressure Plate : Disc : PP & Disc :

2.5L 153" ENG. CF360040 381014 -

1989. - 1990. Pressure Plate : Disc : PP & Disc :

2.5L 153" ENG. TURBO CF360040 CFT360040 381014 381014 -

CFT360040 381014 -

# Clutch Pattern

9 CFT360040 381014 -

DF014040

11014040 23014040 01014040

-

DF014040

11014040 23014040 01014040

-

11014040 23014040 01014040

13/16"-18 # Clutch Pattern

9 DF014040

13/16"-18 # Clutch Pattern

9 CFT360040 381014 -

13/16"-18 -

-

13/16"-18 # Clutch Pattern

N1728 51001 N1728 51001 N1728 51001 N1728 51001 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

45

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Dual Friction DF Disc DF PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Counterbalance T.O.B. Align Tool Pilot Bearing

DODGE LIGHT TRUCK, SUV & VAN CARAVAN - Continued 4 CYLINDER

1991. - 1992. Pressure Plate : Disc : PP & Disc :

2.5L 153" ENG. NON-TURBO CF360040 CFT360040 381099 381099 -

1991. - 1992. Pressure Plate : Disc : PP & Disc :

2.5L 153" ENG. TURBO CF360040 CFT360040 381099 381099 -

9 DF045040

-

-

# Clutch Pattern

9 DF099040

-

-

DF014040

11014040 23014040 01014040

-

15/16"-17 15/16"-17 # Clutch Pattern

N1728 51002 N1728 51002 -

6 CYLINDER 1990. Pressure Plate : Disc : PP & Disc :

3.0L 181" ENG. CF360040 381014 -

1991. - 1992 Pressure Plate : Disc : PP & Disc :

3.0L 181" ENG. CF360040 381099 -

1993. - 1994. Pressure Plate : Disc : PP & Disc :

3.3L 201" ENG. CF360040 381099 -

9 CFT360040 381014 -

# Clutch Pattern

9 CFT360040 381099 -

DF045040

-

-

DF099040

-

-

CFT361890 384193 -

DF383271 DF193890

-

-

15/16"-17 # Clutch Pattern

9 CFT360040 381099 -

13/16"-18 -

15/16"-17 # Clutch Pattern

N1728 51001 N1728 51002 N1728 51002 -

DAKOTA 6 CYLINDER 1992. - 1999. Pressure Plate : Disc : PP & Disc :

3.9L 230" ENG CF361890 384193 -

2001. - 2003.

3.9L 230" ENG.

10.4

# Clutch Pattern

12

NOTE: OE CLUTCH DISC MAY BE 11" Pressure Plate : Disc : PP & Disc : CF178066 * NEW! 2004. - 2007. 3.7L 226" ENG NOTE: OE CLUTCH DISC MAY BE 11" Pressure Plate : Disc : PP & Disc : CF178066 *

DF066178

-

-

-

# Clutch Pattern

-

N1764 -

1-1/8"-10 -

12 DF066178

1-1/8"-10 -

N1764 51009 41003

1-1/8"-10 # Clutch Pattern

N1764 51009 41003

8 CYLINDER 1994. - 1999.

5.2L 318" ENG.

12

NOTE: OE CLUTCH DISC MAY BE 11" Pressure Plate : Disc : PP & Disc : CF178066 * 2000. - 2007.

DF066178

-

-

# Clutch Pattern

4.7L 285" ENG.

12

NOTE: OE CLUTCH DISC MAY BE 11" Pressure Plate : Disc : PP & Disc : CF178066 *

DF066178

-

-

DF489989

01489989

-

1-1/8"-10 N1764 51009 41003

1-1/8"-10 # Clutch Pattern

N1764 51009 41003

RAM 1500, 2500, 3500 10 CYLINDER 1994. - 2003. Pressure Plate : Disc : PP & Disc :

8.0L 488" V10 ENG. -

12-1/4 -

1-1/4"-10 # Clutch Pattern

INCLUDED INCLUDED 41002

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

46

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Dual Friction DF Disc DF PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Counterbalance T.O.B. Align Tool Pilot Bearing

DODGE LIGHT TRUCK, SUV & VAN RAM 1500, 2500, 3500 - Continued 10 CYLINDER

2003. - 2006. Pressure Plate : Disc : PP & Disc :

8.3L V10 ENG. SRT-10 -

12-1/4 DF985985

-

-

DF989966

01989966

-

1-1/8"-26 # Clutch Pattern

N1754 51075 41003

6 CYLINDER NEW! 1988. - 1993 Pressure Plate : Disc : PP & Disc :

5.9L 360" ENG. TURBO DIESEL -

1994. - 1998.

5.9L 360" ENG. TURBO DIESEL

12-1/4

1994. - 2001.

-

-

DF489989

01489989

-

01489989

ETH engine code. DF320539

01320539

5.9L 360" ENG. TURBO DIESEL

1-3/8"-10

#23 Clutch Pattern

-

5.9L 360" & 6.7L 409" ENG. TURBO DIESEL 6SPD

1-1/4"-10

400147 13

1-3/8"-10 400147 #23 Clutch Pattern

13

-

0 IN/OZ

#22 Clutch Pattern

-

INCLUDED INCLUDED 41002

1-1/4"-10

400151 13

0 IN/OZ

# Clutch Pattern

#22 Clutch Pattern

-

INCLUDED INCULDED 41002

N1764 51009 41003

400151 12-1/4

DF489989

1-1/8"-10 -

12-1/4

NOTE: w/ "DEE" NEW VENTURE 6 SPD. (CAST IRON TRANS CASE) ONLY. Pressure Plate : Disc : PP & Disc : DF320539 01320539 2005. - 2009.

#22 Clutch Pattern

5.9L 360" ENG. TURBO DIESEL H.O.

NOTE: 6 SPD. NV5600 trans ONLY. Pressure Plate : Disc : PP & Disc : 2005. - 2006.

DF066178

1-1/4"-10 400151 -

12

5.9L 360" ENG. TURBO DIESEL

NOTE: NV4500 5 SPD. TRANS ONLY Pressure Plate : Disc : PP & Disc : 2001. - 2005.

-

5.9L 360" ENG. TURBO DIESEL

NOTE: NV4500 5 SPD. & NV5600 6 SPD. TRANS.. Pressure Plate : Disc : PP & Disc : 2001. - 2004.

01489989

3.9L 230" V6 GAS ENG.

NOTE: OE CLUTCH DISC MAY BE 11" Pressure Plate : Disc : PP & Disc : CF178066 * 1999. - 2000.

#22 Clutch Pattern

12-1/4

NOTE: GETRAG & NV4500 TRANS. CAST IRON OE TYPE FLYWHEEL. Pressure Plate : Disc : PP & Disc : DF489989

1-1/4"-10 -

1-3/8"-10

NOTE: w/G56 ALUM TRAN. REQUIRES UPGRADED CLUTCH HYD. SMF INCLUDED (MAY CAUSE DRIVETRAIN NOISE). Pressure Plate : INCLUDED Disc : PP & Disc : # Clutch Pattern DF413523 01413523 -

INCLUDED INCLUDED 41002 0 IN/OZ INCLUDED INCLUDED 41002 0 IN/OZ INCLUDED INCLUDED 41002 0 IN/OZ INCLUDED INCLUDED 41002 0 IN/OZ INCLUDED INCLUDED INCLUDED

8 CYLINDER 1994. - 2003.

5.2L 318" & 5.9L 360" MAGNUM ENG.

NOTE: OE CLUTCH DISC MAY BE 11" Pressure Plate : Disc : PP & Disc : CF178066 * 2002. - 2005.

12 DF066178

-

-

4.7L 285" ENG.

# Clutch Pattern

12

NOTE: OE CLUTCH DISC MAY BE 11" Pressure Plate : Disc : PP & Disc : CF178066 *

DF066178

-

1-1/8"-10

-

1-1/8"-10 # Clutch Pattern

N1764 51009 41003 N1764 51009 41003

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

47

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Dual Friction DF Disc DF PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Counterbalance T.O.B. Align Tool Pilot Bearing

DODGE LIGHT TRUCK, SUV & VAN RAM 1500, 2500, 3500 - Continued 8 CYLINDER 2003. - 2008.

5.7L HEMI MAGNUM ENG.

NOTE: 2500 RAM ONLY Pressure Plate : Disc : PP & Disc : -

-

12 DF440178

-

-

1-1/8"-10 # Clutch Pattern

N1764 -

SERIES 100, 200, 300, RAMCHARGER & VAN 6 CYLINDER 1969. - 1983. Pressure Plate : Disc : PP & Disc :

3.7L 225" ENG. CF165552 384070 -

1988. - 1991.

3.9L 238" ENG.

NOTE: w/A435 TRANS 4 SPD Pressure Plate : CF165400 Disc : 384163 PP & Disc : 1992. - 1993. Pressure Plate : Disc : PP & Disc :

CFT165552 384070 -

DF384070 DF070552

-

11 LM165552 LM384070 LM070552 11

-

3.9L 238" ENG. TRUCK ONLY -

DF384070 DF163473

-

-

-

# Clutch Pattern

# Clutch Pattern

-

N1463 51023 -

1"-23 -

11 DF962962

1"-23 -

1"-19 # Clutch Pattern

51023 N1764 -

8 CYLINDER 1966. - 1987.

5.2L 318" ENG.

NOTE: 143 TOOTH. Pressure Plate : CF165552 Disc : 384070 PP & Disc : 1969. - 1971.

DF384070 DF070552

-

LM165552 LM384070 LM070552

CFT361909 383946 -

DF946909

-

1972. - 1981. Pressure Plate : Disc : PP & Disc :

6.5L 400" ENG. CF361909 383946 -

1974. - 1978.

7.2L 440" ENG.

NOTE: 143 TOOTH. Pressure Plate : CF361909 Disc : 383946 PP & Disc : -

-

DF384070 DF070552

-

#3 Clutch Pattern

DF946909

-

#3 Clutch Pattern

-

DF946909

-

-

#3 Clutch Pattern

NOTE: 143 TOOTH. Pressure Plate : CF361675 Disc : 383269 PP & Disc : -

CFT361675 383269 -

DF383269 DF269675

-

LM361675 LM383269 LM269675

NOTE: 130 TOOTH. Pressure Plate : CF361675 Disc : 383269 PP & Disc : -

CFT361675 383269 -

DF383269 DF269675

-

LM361675 LM383269 LM269675

-

1"-23 700420 #2 Clutch Pattern

700400 900400 #2 Clutch Pattern

12 DF946909

1"-23 700420 -

10.4

CFT361909 383946 -

1"-23 #3 Clutch Pattern

12 CFT361909 383946 -

1"-23 700450 -

12 CFT361909 383946 -

1"-23 700420 -

LM165552 LM384070 LM070552

5.2L 318" ENG.

NEW! 1979. - 1981. 7.2L 440" ENG. Pressure Plate : CF361909 Disc : 383946 PP & Disc : -

# Clutch Pattern

11 CFT165552 384070 -

1"-23 700420 -

12

5.9L 360" ENG.

NOTE: 143 TOOTH. Pressure Plate : CF165552 Disc : 384070 PP & Disc : -

1977. - 1987.

CFT165552 384070 -

6.3L 383" ENG.

NOTE: 143 TOOTH. Pressure Plate : CF361909 Disc : 383946 PP & Disc : 1971. - 1987.

11

-

1"-23 #3 Clutch Pattern

0 IN/OZ N1463 51023 0 IN/OZ N1463 51023 19.8 IN/OZ N1463 51023 N1463 51023 0 IN/OZ N1463 51023 0 IN/OZ N1463 51023 N1463 51023 N1463 51023 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

48

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Dual Friction DF Disc DF PP & Disc

Counterbalance T.O.B. Align Tool Pilot Bearing

DODGE LIGHT TRUCK, SUV & VAN SERIES 100, 200, 300, RAMCHARGER & VAN - Continued 8 CYLINDER 1988. - 1991.

5.2L 318" ENG.

NOTE: 143 TOOTH. Pressure Plate : CF165400 Disc : 384163 PP & Disc : NEW! 1988. - 1991. 5.9L 360" ENG. NOTE: 143 TOOTH. Pressure Plate : CF165400 Disc : 384163 PP & Disc : 1992. - 1993. Pressure Plate : Disc : PP & Disc :

11 -

DF384070 DF163473

-

-

700420 #3 Clutch Pattern

11 -

5.2L 318" & 5.9L 360" ENG. -

DF384070 DF163473

-

-

-

DF581780

11515004 23515004 01515004

1"-23 700450 #3 Clutch Pattern

11 DF962962

1"-23

-

1"-19 # Clutch Pattern

0 IN/OZ 51023 19.8 IN/OZ 51023 N1764 -

DODGE-MITSUBISHI CHALLENGER 1977. - 1983. Pressure Plate : Disc : PP & Disc :

2.6L COUPE CF780581

1979. - 1983. Pressure Plate : Disc : PP & Disc :

1.6L COUPE CF006518

1984. - 1986. Pressure Plate : Disc : PP & Disc :

2.6L COUPE CF780581

225 CFT581780

8-7/8 -

200 CFT518006

DF518006

-

CFT581780

DF581780

11515004 23515004 01515004

1973.10 - 1978. Pressure Plate : Disc : PP & Disc :

1.6L COLT K ENG. CF006518 CFT518006

DF518006

-

1977. - 1980. Pressure Plate : Disc : PP & Disc :

2.6L COLT F ENG. WAGON CF780581 CFT581780

1979. - 1981. Pressure Plate : Disc : PP & Disc :

1.6L COLT Z ENG. CF006518 CFT518006

1979. - 1984. Pressure Plate : Disc : PP & Disc :

1.4L COLT H/B J ENG. CF006518 CFT518006

1984. - 1988. Pressure Plate : Disc : PP & Disc :

1.6L COLT TURBO K ENG. CF006518 CFT518006

1984. - 1990. Pressure Plate : Disc : PP & Disc :

1.6L COLT K ENG. 4 SPD CF006518 CFT518006

1989. - 1990. Pressure Plate : Disc : PP & Disc :

1.6L COLT TURBO K ENG. CF012516 *

# Clutch Pattern

7-7/8 -

225

1"-23 7/8"-20 # Clutch Pattern

8-7/8 -

1"-23 # Clutch Pattern

550 010 210 -

COLT 200

7-7/8 -

225 DF581780

11515004 23515004 01515004

DF518006

-

-

-

-

DF518006

-

-

DF518006

-

-

DF516012

-

*

7/8"-20 # Clutch Pattern

7-7/8 -

215

7/8"-20 # Clutch Pattern

7-7/8

200

7/8"-20 # Clutch Pattern

7-7/8

200

1"-23 # Clutch Pattern

7-7/8

200 DF518006

# Clutch Pattern

8-7/8

200

7/8"-20 -

7/8"-20 # Clutch Pattern

8-19/32 -

7/8"-20 # Clutch Pattern

010 550 010 210 210 210 210 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

49

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Dual Friction DF Disc DF PP & Disc

Counterbalance T.O.B. Align Tool Pilot Bearing

DODGE-MITSUBISHI COLT - Continued

1989. - 1993. Pressure Plate : Disc : PP & Disc :

1.5L COLT Q ENG. 4 SPD CF006518 CFT518006

1989. - 1994. Pressure Plate : Disc : PP & Disc :

1.5L COLT Q ENG. CF006518 CFT518006

200 DF518006

-

7-7/8 -

200 DF518006

-

DF518006

-

7/8"-20 # Clutch Pattern

7-7/8 -

7/8"-20 # Clutch Pattern

210 210 -

COLT VISTA 1984. - 1986.11 Pressure Plate : Disc : PP & Disc :

2.0L COLT VISTA 2WD. CF006518 CFT518006

1992. - 1996. Pressure Plate : Disc : PP & Disc :

2.4L COLT VISTA 2 & 4WD CF010536 *

200

7-7/8 -

225 DF536010

*

11010635 23536010 01536010

* *

7/8"-20 # Clutch Pattern

8-7/8 -

7/8"-20 # Clutch Pattern

210 210 -

CONQUEST 1984. - 1987.05

2.6L CONQUEST

225

NOTE: NON-TURBO & TURBO w/o INTERCOOLER Pressure Plate : Disc : PP & Disc : CF004515 CFT515004 1985. - 1987.05

11515004 23515004 01515004

2.6L CONQUEST

225

NOTE: TURBO w/INTERCOOLER Pressure Plate : Disc : PP & Disc : CF004515 CFT515004 1987.06 - 1990.

DF515004

8-7/8

DF515004

11515004 23515004 01515004

2.6L CONQUEST

NOTE: TURBO & NON-TURBO Pressure Plate : Disc : PP & Disc : CF033537 CFT537033

DF537033

11500300 23544020 01500300

DF581780

11515004 23515004 01515004

# Clutch Pattern

8-7/8 -

240

1"-23

1"-23 # Clutch Pattern

9-7/16 -

550 -

422 -

1"-23 # Clutch Pattern

422 -

D-50 & RAM 50 PICK-UPS 1979. - 1990. Pressure Plate : Disc : PP & Disc : 1981. - 1990. Pressure Plate : Disc : PP & Disc :

2.6L ENG. 2 & 4WD CF780581 CFT581780 2.0L ENG. -

225

8-7/8 -

215 CFT510001

1982. - 1986. Pressure Plate : Disc : PP & Disc :

2.3L DIESEL ENG. CF780581 CFT581780

1990. - 1994. Pressure Plate : Disc : PP & Disc :

2.4L ENG. 2 & 4WD CF780581 CFT581780

1990. - 1994. Pressure Plate : Disc : PP & Disc :

3.0L V-6 ENG. 2 & 4WD. CF034538 -

DF510001

-

DF581780

-

11515004 23515004 01515004

-

11515004 23515004 01515004

DF538034

-

1"-23 # Clutch Pattern

8-7/8 -

240

1"-23 # Clutch Pattern

8-7/8

225 DF581780

# Clutch Pattern

8-19/32

225

1"-23 -

1"-23 # Clutch Pattern

9-7/16 -

1-3/16"-14 # Clutch Pattern

550 52008 52008 550 52008 550 52008 440 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

50

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Dual Friction DF Disc DF PP & Disc

CFT581780

DF581780

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Counterbalance T.O.B. Align Tool Pilot Bearing

DODGE-MITSUBISHI RAIDER

1987. - 1989. Pressure Plate : Disc : PP & Disc :

2.6L RAIDER CF780581

1987. - 1990. Pressure Plate : Disc : PP & Disc :

2.0L RAIDER -

1988. - 1989. Pressure Plate : Disc : PP & Disc :

225 11515004 23515004 01515004

8-7/8 -

215 CFT510001

DF510001

-

3.0L RAIDER V-6 ENG. CF034538 -

DF538034

-

3.0L STEALTH 2WD. CF010536 *

DF536010

*

11010635 23536010 01536010

*

11945520 23945520 01945520

*

-

# Clutch Pattern

8-19/32 -

240

1"-23 1"-23 # Clutch Pattern

9-7/16 -

1-3/16"-14 # Clutch Pattern

550 52008 422 52008 440 -

STEALTH 1991. - 1997. Pressure Plate : Disc : PP & Disc : 1991. - 1997. Pressure Plate : Disc : PP & Disc :

3.0L STEALTH RT TURBO 4WD. -

225

* *

8-7/8 -

250 DF945520

* *

7/8"-20 # Clutch Pattern

9-3/4 -

1"-23 # Clutch Pattern

210 592 -

DeLOREAN DeLOREAN 1980. - 1983. Pressure Plate : Disc : PP & Disc :

3.0L DeLOREAN CF121284 *

235 -

DF284121

9-1/4 -

15/16"-21 # Clutch Pattern

-

EAGLE/JEEP SUMMIT 1989. - 1996. Pressure Plate : Disc : PP & Disc :

1.5L & 1.6L SUMMIT CF006518 CFT518006

200

1990. Pressure Plate : Disc : PP & Disc :

2.0L SUMMIT SOHC 2WD CF012516 *

1992. - 1996. Pressure Plate : Disc : PP & Disc :

2.4L SUMMIT CF010536 *

1993. - 1996. Pressure Plate : Disc : PP & Disc :

1.8L SUMMIT & WAGON CF012516 *

DF516012

1989. - 1994. Pressure Plate : Disc : PP & Disc :

1.8L TALON SOHC CF006518 CFT518006

DF518006

1989. - 1994. Pressure Plate : Disc : PP & Disc :

2.0L TALON NON-TURBO CF012516 *

1989. - 1999. Pressure Plate : Disc : PP & Disc :

2.0L TALON TURBO 2WD & 4WD CF010536 *

DF518006

-

7-7/8 -

215 DF516012

-

*

-

DF536010

*

11010635 23536010 01536010

-

* *

-

7/8"-20 # Clutch Pattern

8-7/8 -

215

*

# Clutch Pattern

8-19/32

225

7/8"-20 -

7/8"-20 # Clutch Pattern

8-19/32 -

7/8"-20 # Clutch Pattern

210 50020 210 50020 210 50020 210 50020 -

TALON 200 -

7-7/8 -

215 DF516012

-

*

DF536010

*

11010635 23536010 01536010

# Clutch Pattern

8-19/32 -

225

* *

7/8"-20 7/8"-20 # Clutch Pattern

8-7/8 -

7/8"-20 # Clutch Pattern

210 50020 210 50020 210 50020 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

51

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Dual Friction DF Disc DF PP & Disc

Counterbalance T.O.B. Align Tool Pilot Bearing

EAGLE/JEEP TALON - Continued 1995. - 1999.

2.0L TALON NON-TURBO

230

NOTE: MODULAR CLUTCH - INCLUDES FLYWHEEL Pressure Plate : Disc : PP & Disc : DF325417

-

9 -

15/16"-17 # Clutch Pattern

4166 -

FORD CONTOUR 4 CYLINDER 1995. - 2000. Pressure Plate : Disc : PP & Disc :

2.0L -

-

DF142142

2.5L & SVT -

-

DF988988

1972. - 1983. Pressure Plate : Disc : PP & Disc :

2.3L COURIER CF138374

CFT374138

DF374138

1977. - 1983. Pressure Plate : Disc : PP & Disc :

2.0L COURIER CF138374

*

-

*

-

9-7/16 -

1"-23 # Clutch Pattern

52008 -

6 CYLINDER 1995. - 2000. Pressure Plate : Disc : PP & Disc :

-

9-7/16 -

1"-23 # Clutch Pattern

52008 -

COURIER 215 11374138 23374138 01374138

8-19/32 -

215 CFT374138

# Clutch Pattern

8-19/32

DF374138

11374138 23374138 01374138

-

DF003503

11003503 23543056 01003503

-

15/16"-22 15/16"-22 # Clutch Pattern

50005 091 50005 -

ESCORT & ZX 2 4 CYLINDER 1991. - 1996. Pressure Plate : Disc : PP & Disc :

1.8L 112" ENG. DOHC CF360503 280003 -

1991. - 1996. Pressure Plate : Disc : PP & Disc :

1.9L 116" ENG. SOHC CF360504 * 280004 -

1997. - 2003. Pressure Plate : Disc : PP & Disc :

2.0L 120" ENG. DOHC & DOHC S/R -

8-1/2

200 DF004504

-

*

DF007507

-

*

# Clutch Pattern

7-7/8 -

225

15/16"-22 7/8"-20 # Clutch Pattern

8-7/8 -

15/16"-22 # Clutch Pattern

091 50005 453 52012 N1710 50005 -

FAIRLANE 6 CYLINDER 1969. - 1970.

4.1L 250" ENG.

10

NOTE: O.E. CLUTCH DISC MAY BE 10-1/2" Pressure Plate : CF360030 CFT360030 Disc : 280490 280490 PP & Disc : -

DF490030

-

-

1-1/16"-10 # Clutch Pattern

N1439 52010 -

8 CYLINDER 1963. - 1964.

4.3L 260" ENG. STD & H.D.

NOTE: O.E. CLUTCH DISC MAY BE 10-1/2" Pressure Plate : CF360030 CFT360030 Disc : 280490 280490 PP & Disc : 1963. - 1967.

10 DF490030

-

-

4.7L 289" ENG. STD & H.D.

# Clutch Pattern

10

NOTE: 28 IN/OZ BAL. 157 TOOTH. O.E. CLUTCH DISC MAY BE 10-1/2" Pressure Plate : CF360030 CFT360030 Disc : 280490 280490 PP & Disc : DF490030

-

1-1/16"-10

-

1-1/16"-10 700220 900220 #4 Clutch Pattern

N1439 52010 28.0 IN/OZ N1439 52010 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

52

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Dual Friction DF Disc DF PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Counterbalance T.O.B. Align Tool Pilot Bearing

FORD FAIRLANE - Continued 8 CYLINDER

NEW! 1963. - 1967. 4.7L 289" ENG. STD & H.D. NOTE: 28 IN/OZ BAL. 164 TOOTH. O.E. CLUTCH DISC MAY BE 10-1/2" Pressure Plate : CF360030 CFT360030 Disc : 280490 280490 PP & Disc : DF490030 1966. - 1967.

10 -

-

6.4L 390" ENG. GT

1-1/16"-10 700240 900240

11

28.0 IN/OZ

#4 Clutch Pattern

N1439 52010 -

1-3/8"-10

0 IN/OZ

NOTE: REPLACES 11-1/2" LONG STYLE PP WITH DIAPHRAGM TYPE. ZERO BAL. MAY INTERFERE WITH CAST IRON BELLHOUSING. Pressure Plate : 700260 Disc : DF382559 900260 PP & Disc : #6 Clutch Pattern MST559033 DF559033 -

N1493 52110 -

NOTE: REPLACES 11" LONG STYLE PP WITH DIAPHRAGM TYPE. ZERO BAL. MAY INTERFERE WITH CAST IRON BELLHOUSING. Pressure Plate : 700260 Disc : DF382559 900260 PP & Disc : #5 Clutch Pattern MST559000 DF559000 -

N1493 52110 -

1966. - 1969.

6.4L 390" ENG. 2 BBL STD

11

NOTE: MAY INTERFERE WITH CAST IRON BELLHOUSING. Pressure Plate : CF260000 CFT260000 Disc : 280700 280700 DF281226 PP & Disc : DF700000 1966. - 1970.

-

-

5.8L 351" ENG

700260 900260 #5 Clutch Pattern

11

NOTE: w/26 SPLINE AFTERMARKET TRANS. 28 IN/OZ BAL. Pressure Plate : CFT260000 Disc : 388144 DF388144 PP & Disc : DF148000

-

NEW! 1966. - 1970. 6.4L 390" ENG NOTE: w/26 SPLINE AFTERMARKET TRANS. ZERO BAL. Pressure Plate : CFT260000 Disc : 388144 DF388144 PP & Disc : DF148000

-

1-1/8"-26 700240 900240

11 -

1-1/16"-10

-

0 IN/OZ N1439 52010 28.0 IN/OZ

#5 Clutch Pattern

N1439 50048 -

1-1/8"-26

0 IN/OZ

700260 900260 #5 Clutch Pattern

N1439 50048 -

11 1-1/8"-26 0 IN/OZ NEW! 1967. - 1970. 7.0L 427" ENG NOTE: REPLACES 11" LONG STYLE PP WITH DIAPHRAGM TYPE, w/26 SPLINE AFTERMARKET TRANS, MAY INTERFERE WITH CAST IRON BELLHOUSING. ZERO BAL. Pressure Plate : CFT260000 700260 CALL Disc : 388144 DF388144 900260 50048 PP & Disc : #5 Clutch Pattern DF148000 11 1-3/8"-10 0 IN/OZ NEW! 1967. - 1970. 7.0L 427" ENG. NOTE: REPLACES 11-1/2" LONG STYLE PP WITH DIAPHRAGM TYPE, MAY INTERFERE WITH CAST IRON BELLHOUSING. ZERO BAL. Pressure Plate : 700260 N1493 Disc : DF382559 900260 52110 PP & Disc : #6 Clutch Pattern MST559033 DF559033 NOTE: REPLACES 11" LONG STYLE PP WITH DIAPHRAGM TYPE, MAY INTERFERE WITH CAST IRON BELLHOUSING. ZERO BAL. Pressure Plate : 700260 Disc : DF382559 900260 PP & Disc : #5 Clutch Pattern MST559000 DF559000 -

N1493 52110 -

11 1-1/8"-26 0 IN/OZ NEW! 1967. - 1970. 7.0L 427" ENG. NOTE: REPLACES 11-1/2" LONG STYLE PP WITH DIAPHRAGM TYPE, w/26 SPLINE AFTERMARKET TRANS, MAY INTERFERE WITH CAST IRON BELLHOUSING. ZERO BAL. Pressure Plate : CFT360033 11360033 700260 CALL Disc : 388144 DF388144 23388144 900260 50048 PP & Disc : #6 Clutch Pattern DF148033 01148033 11 1-1/8"-26 28.0 IN/OZ NEW! 1967. - 1970. 7.0L 428" ENG NOTE: REPLACES 11" LONG STYLE PP WITH DIAPHRAGM TYPE, w/26 SPLINE AFTERMARKET TRANS, MAY INTERFERE WITH CAST IRON BELLHOUSING. 28 IN/OZ BAL. Pressure Plate : CFT260000 700270 CALL Disc : 388144 DF388144 900270 50048 PP & Disc : #5 Clutch Pattern DF148000 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

53

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Dual Friction DF Disc DF PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Counterbalance T.O.B. Align Tool Pilot Bearing

FORD FAIRLANE - Continued 8 CYLINDER 1967. - 1970.

7.0L 428" ENG.

11

1-3/8"-10

28.0 IN/OZ

NOTE: REPLACES 11-1/2" LONG STYLE PP WITH DIAPHRAGM TYPE, MAY INTERFERE WITH CAST IRON BELLHOUSING. 28 IN/OZ BAL. Pressure Plate : 700270 N1493 Disc : DF382559 900270 52110 PP & Disc : #6 Clutch Pattern MST559033 DF559033 NOTE: REPLACES 11" LONG STYLE PP WITH DIAPHRAGM TYPE, MAY INTERFERE WITH CAST IRON BELLHOUSING. 28 IN/OZ BAL. Pressure Plate : 700270 Disc : DF382559 900270 PP & Disc : #5 Clutch Pattern MST559000 DF559000 1967. - 1970.

7.0L 428" ENG.

11

1-1/8"-26

N1493 52110 28.0 IN/OZ

NOTE: REPLACES 11-1/2" LONG STYLE PP WITH DIAPHRAGM TYPE, w/26 SPLINE AFTERMARKET TRANS, MAY INTERFERE WITH CAST IRON BELLHOUSING. 28 IN/OZ BAL. Pressure Plate : CFT360033 11360033 700270 CALL Disc : 388144 DF388144 23388144 900270 50048 PP & Disc : #6 Clutch Pattern DF148033 01148033 1967. - 1970.

7.0L 429" ENG

11

1-1/8"-26

0 IN/OZ

NOTE: REPLACES 11" LONG STYLE PP WITH DIAPHRAGM TYPE, w/26 SPLINE AFTERMARKET TRANS, MAY INTERFERE WITH CAST IRON BELLHOUSING. ZERO BAL. Pressure Plate : CFT260000 700280 CALL Disc : 388144 DF388144 50048 PP & Disc : #5 Clutch Pattern DF148000 11 1-3/8"-10 0 IN/OZ NEW! 1967. - 1970. 7.0L 429" ENG. NOTE: REPLACES 11-1/2" LONG STYLE PP WITH DIAPHRAGM TYPE, MAY INTERFERE WITH CAST IRON BELLHOUSING. ZERO BAL. Pressure Plate : 700280 N1493 Disc : DF382559 52110 PP & Disc : #6 Clutch Pattern MST559033 DF559033 NOTE: REPLACES 11" LONG STYLE PP WITH DIAPHRAGM TYPE, MAY INTERFERE WITH CAST IRON BELLHOUSING. ZERO BAL. Pressure Plate : 700280 Disc : DF382559 PP & Disc : #5 Clutch Pattern MST559000 DF559000 -

N1493 52110 -

11 1-1/8"-26 0 IN/OZ NEW! 1967. - 1970. 7.0L 429" ENG. NOTE: REPLACES 11-1/2" LONG STYLE PP WITH DIAPHRAGM TYPE, w/26 SPLINE AFTERMARKET TRANS, MAY INTERFERE WITH CAST IRON BELLHOUSING. ZERO BAL. Pressure Plate : CFT360033 11360033 700280 CALL Disc : 388144 DF388144 23388144 50048 PP & Disc : #6 Clutch Pattern DF148033 01148033 1968. - 1970.

5.0L 302" ENG.

10

NOTE: 28 IN/OZ BAL. 157 TOOTH. O.E. CLUTCH DISC MAY BE 10-1/2" Pressure Plate : CF360030 CFT360030 Disc : 280490 280490 PP & Disc : DF490030

-

-

NOTE: 28 IN/OZ BAL. 164 TOOTH. O.E. CLUTCH DISC MAY BE 10-1/2" Pressure Plate : CF360030 CFT360030 Disc : 280490 280490 PP & Disc : DF490030

-

-

1968. - 1970.

5.8L 351" ENG.

700220 900220 #4 Clutch Pattern

700240 900240 #4 Clutch Pattern

11

NOTE: 28 IN/OZ BAL. MAY INTERFERE WITH CAST IRON BELLHOUSING. Pressure Plate : CF260000 CFT260000 Disc : 280700 280700 DF281226 PP & Disc : DF700000

-

6.4L 390" ENG. 2 BBL STD NEW! 1969. NOTE: ZERO BAL. MAY INTERFERE WITH CAST IRON BELLHOUSING. Pressure Plate : CF260000 CFT260000 Disc : 280700 280700 DF281226 PP & Disc : DF700000

-

1-1/16"-10 700240 900240

11 -

1-1/16"-10

-

28.0 IN/OZ N1439 52010 N1439 52010 28.0 IN/OZ

#5 Clutch Pattern

N1439 52010 -

1-1/16"-10

0 IN/OZ

700280 #5 Clutch Pattern

N1439 52010 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

54

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Dual Friction DF Disc DF PP & Disc

Counterbalance T.O.B. Align Tool Pilot Bearing

FORD FAIRMONT, MAVERICK 4 CYLINDER

1978. - 1983. Pressure Plate : Disc : PP & Disc :

2.3L 140" ENG. CF360024 * 281203 -

8-1/2 -

DF203024

-

*

-

1"-23 # Clutch Pattern

N1705 52008 -

6 CYLINDER 1974. - 1977.

4.1L 250" ENG.

10

NOTE: O.E. CLUTCH DISC MAY BE 10-1/2" Pressure Plate : CF360030 CFT360030 Disc : 280490 280490 PP & Disc : -

DF490030

-

-

1-1/16"-10 # Clutch Pattern

N1714 52010 -

8 CYLINDER 1973. - 1977.

5.0L 302" ENG.

10

NOTE: 28 IN/OZ BAL. 157 TOOTH. O.E. CLUTCH DISC MAY BE 10-1/2" Pressure Plate : CF360030 CFT360030 Disc : 280490 280490 PP & Disc : DF490030

-

-

NOTE: 28 IN/OZ BAL. 164 TOOTH. O.E. CLUTCH DISC MAY BE 10-1/2" Pressure Plate : CF360030 CFT360030 Disc : 280490 280490 PP & Disc : DF490030

-

-

1979.

5.0L 302" ENG.

700220 900220 #4 Clutch Pattern

700240 900240 #4 Clutch Pattern

10

NOTE: 28 IN/OZ BAL. 157 TOOTH. Pressure Plate : CF360025 CFT360025 Disc : 280490 280490 PP & Disc : -

DF490025

-

-

NOTE: 28 IN/OZ BAL. 164 TOOTH. Pressure Plate : CF360025 CFT360025 Disc : 280490 280490 PP & Disc : -

DF490025

-

-

1-1/16"-10

1-1/16"-10 700220 900220 #4 Clutch Pattern

700240 900240 #4 Clutch Pattern

28.0 IN/OZ N1714 52010 N1714 52010 28.0 IN/OZ N1714 52010 N1714 52010 -

FALCON 8 CYLINDER 1963. - 1964.

4.3L 260" ENG.

10

NOTE: O.E. CLUTCH DISC MAY BE 10-1/2" Pressure Plate : CF360030 CFT360030 Disc : 280490 280490 PP & Disc : 1965. - 1967.

DF490030

-

-

4.7L 289" ENG. -

-

NOTE: 28 IN/OZ BAL. 164 TOOTH. O.E. CLUTCH DISC MAY BE 10-1/2" Pressure Plate : CF360030 CFT360030 Disc : 280490 280490 PP & Disc : DF490030

-

-

1968. - 1969.

# Clutch Pattern

10

NOTE: 28 IN/OZ BAL. 157 TOOTH. O.E. CLUTCH DISC MAY BE 10-1/2" Pressure Plate : CF360030 CFT360030 Disc : 280490 280490 PP & Disc : DF490030

5.8L 351" ENG

1-1/16"-10

1-1/16"-10 700220 900220 #4 Clutch Pattern

700240 900240 #4 Clutch Pattern

11

1-1/8"-26

NOTE: 28 IN/OZ BAL. 164 TOOTH. w/26 SPLINE AFTERMARKET TRANS, MAY INTERFERE WITH CAST IRON BELLHOUSING. Pressure Plate : CFT260000 700240 Disc : 388144 DF388144 900240 PP & Disc : #5 Clutch Pattern DF148000 1968. - 1969.

5.8L 351" ENG.

11

NOTE: 28 IN/OZ BAL. 164 TOOTH. MAY INTERFERE WITH CAST IRON BELLHOUSING. Pressure Plate : CF260000 CFT260000 Disc : 280700 280700 DF281226 PP & Disc : DF700000 -

-

1-1/16"-10 700240 900240 #5 Clutch Pattern

N1439 52010 28.0 IN/OZ N1439 52010 N1439 52010 28.0 IN/OZ N1439 50048 28.0 IN/OZ N1439 52010 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

55

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Dual Friction DF Disc DF PP & Disc

Counterbalance T.O.B. Align Tool Pilot Bearing

FORD FALCON - Continued 8 CYLINDER 1968. - 1970.

5.0L 302" ENG. 4 BBL

10

NOTE: 28 IN/OZ BAL. 157 TOOTH. O.E. CLUTCH DISC MAY BE 10-1/2" Pressure Plate : CF360030 CFT360030 Disc : 280490 280490 PP & Disc : DF490030

-

-

NOTE: 28 IN/OZ BAL. 164 TOOTH. O.E. CLUTCH DISC MAY BE 10-1/2" Pressure Plate : CF360030 CFT360030 Disc : 280490 280490 PP & Disc : DF490030

-

-

1-1/16"-10 700220 900220 #4 Clutch Pattern

700240 900240

28.0 IN/OZ N1439 52010 -

#4 Clutch Pattern

N1439 52010 -

1-1/16"-10

0 IN/OZ

FLATHEAD 8 CYLINDER 1932. - 1948.

221" ENG. CUSTOM APPS. w/AFTERMKT TRANS.

10.4

NOTE: REQUIRES CENTERFORCE FLYWHEEL - SEE FLYWHEEL LISTING. Pressure Plate : CF365221 Disc : 381021 DF381021 PP & Disc : DF021221 1932. - 1948.

-

-

221" ENG. CUSTOM APPS. w/AFTERMKT TRANS.

10.4

NOTE: REQUIRES CENTERFORCE FLYWHEEL - SEE FLYWHEEL LISTING. Pressure Plate : CF365221 11360056 Disc : 384161 DF384161 23384161 PP & Disc : DF161056 01161056 1932. - 1948.

-

#2 Clutch Pattern

-

-

-

-

0 IN/OZ 0 IN/OZ

0 IN/OZ

1"-14

#2 Clutch Pattern

-

-

1-1/8"-26

700360 900360 10

0 IN/OZ

#2 Clutch Pattern

#2 Clutch Pattern

10.4

N1716 -

N1714 -

700360 900360

239" V8 ENG. CARS & PICK-UPS w/O.E. TRANS

NOTE: REQUIRES CENTERFORCE FLYWHEEL - SEE FLYWHEEL LISTING. Pressure Plate : CF365221 Disc : 384162 PP & Disc : -

1-1/16"-10 700360 900360

10.4

NEW! 1949. - 1953. 239" ENG. CUSTOM APPS. w/T-5 TRANS NOTE: REQ. CENTERFORCE FLYW.-- PARTS TO BE USED WITH T-5 w/1"x14 INPUT SHAFT Pressure Plate : CF360056 CFT360056 Disc : 382114 382114 PP & Disc : DF114056 -

1-3/8"-10 700340 -

10.4

NEW! 1949. - 1953. 239" ENG. CUSTOM APPS. w/AFTERMKT TRANS. NOTE: REQUIRES CENTERFORCE FLYWHEEL - SEE FLYWHEEL LISTING. Pressure Plate : CF365221 11360056 Disc : 384161 DF384161 23384161 PP & Disc : DF161056 01161056

1"-14

#2 Clutch Pattern

-

-

0 IN/OZ

700340 10.4

NEW! 1949. - 1953. 239" ENG. CUSTOM APPS. w/AFTERMKT TRANS. NOTE: REQUIRES CENTERFORCE FLYWHEEL - SEE FLYWHEEL LISTING. Pressure Plate : CF365221 Disc : 381021 DF381021 PP & Disc : DF021221

1949. - 1953.

-

221" V8 ENG. CARS & PICK-UPS w/O.E. TRANS. -

1-1/8"-26

#2 Clutch Pattern

10.4

NOTE: REQUIRES CENTERFORCE FLYWHEEL - SEE FLYWHEEL LISTING. Pressure Plate : CF365222 Disc : 381870 PP & Disc : -

#2 Clutch Pattern

N1714 -

700340 -

221" ENG. CUSTOM APPS. w/T-5 TRANS

NOTE: REQ. CENTERFORCE FLYW.-- PARTS TO BE USED WITH T-5 w/1"x14 INPUT SHAFT Pressure Plate : CF360056 CFT360056 Disc : 382114 382114 PP & Disc : DF114056 1932. - 1948.

700340 -

1"-10 700360 900360 #2 Clutch Pattern

N1716 0 IN/OZ 0 IN/OZ -

FOCUS ZTS & ZX3 4 CYLINDER 2000. - 2004. Pressure Plate : Disc : PP & Disc :

2.0L DOHC ENG. -

240 -

DF238261

-

*

9-7/16 -

1"-23 # Clutch Pattern

52008 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

56

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Dual Friction DF Disc DF PP & Disc

Counterbalance T.O.B. Align Tool Pilot Bearing

FORD FOCUS ZTS & ZX3 - Continued 4 CYLINDER

NEW! 2002. - 2004. 2.0L SVT w/6 SPD. TRANS. NOTE: REPLACES DMF. INCLUDES ALUMINUM FLYWHEEL w/SPRUNG DISC. Pressure Plate : Disc : PP & Disc : DF011401 01011401 2004. - 2007.

2.3L FOCUS w/ DMF

NOTE: OE DISC SOLID HUB Pressure Plate : Disc : PP & Disc : -

240

-

NEW! 2004.5 - 2008. 2.0L DOHC ENG. NOTE: OE DISC SOLID HUB Pressure Plate : Disc : PP & Disc : -

9-1/8

DF600702

-

*

-

DF600702

*

# Clutch Pattern

9-7/16 -

240 -

-

-

-

1"-23 # Clutch Pattern

9-7/16

-

1"-14

-

1"-23 # Clutch Pattern

-

GALAXIE 6 CYLINDER 1963. - 1970. Pressure Plate : Disc : PP & Disc :

4.0L 240" ENG. 3 SPD. OD. CF260000 CFT260000 280700 280700 -

11 DF281226 DF700000

1-1/16"-10 # Clutch Pattern

N1439 52010 -

8 CYLINDER 1963.

6.7L 406" ENG. 4 SPD.

11

NOTE: MAY INTERFERE WITH CAST IRON BELLHOUSING. Pressure Plate : CF260000 CFT260000 Disc : 280700 280700 DF281226 PP & Disc : DF700000

-

-

6.7L 406" ENG. 4 SPD. NEW! 1963. NOTE: w/26 SPLINE AFTERMARKET TRANS, MAY INTERFERE WITH CAST IRON BELLHOUSING. Pressure Plate : CFT260000 Disc : 388144 DF388144 PP & Disc : DF148000 1963. - 1965.

5.8L 352" ENG. -

# Clutch Pattern

11

#5 Clutch Pattern

6.4L 390" ENG. 2 BBL.

# Clutch Pattern

NOTE: MAY INTERFERE WITH CAST IRON BELLHOUSING. Pressure Plate : CF260000 CFT260000 Disc : 280700 280700 DF281226 PP & Disc : DF700000

-

-

NEW! 1963. - 1970. 6.4L 390" ENG. 2 BBL. NOTE: w/26 SPLINE AFTERMARKET TRANS, MAY INTERFERE WITH CAST IRON BELLHOUSING. Pressure Plate : CFT260000 Disc : 388144 DF388144 PP & Disc : DF148000 -

#5 Clutch Pattern

N1439 50048 -

1-1/16"-10

0 IN/OZ

700260 900260 11

N1439 52010 -

1-1/8"-26 -

11

N1439 50048 -

1-1/16"-10 -

11

N1439 52010 -

1-1/8"-26 -

-

NEW! 1963. - 1965. 5.8L 352" ENG. NOTE: w/26 SPLINE AFTERMARKET TRANS, MAY INTERFERE WITH CAST IRON BELLHOUSING. Pressure Plate : CFT260000 Disc : 388144 DF388144 PP & Disc : DF148000 1963. - 1970.

-

11

NOTE: MAY INTERFERE WITH CAST IRON BELLHOUSING. Pressure Plate : CF260000 CFT260000 Disc : 280700 280700 DF281226 PP & Disc : DF700000

1-1/16"-10

#5 Clutch Pattern

N1439 52010 -

1-1/8"-26

0 IN/OZ

700260 900260 #5 Clutch Pattern

N1439 50048 -

11 1-1/8"-26 28.0 IN/OZ NEW! 1965. - 1970. 7.0L 428" ENG. NOTE: REPLACES 11-1/2" LONG STYLE PP WITH DIAPHRAGM TYPE, w/26 SPLINE AFTERMARKET TRANS, MAY INTERFERE WITH CAST IRON BELLHOUSING. 28 IN/OZ BAL. Pressure Plate : CFT360033 11360033 700270 CALL Disc : 388144 DF388144 23388144 900270 50048 PP & Disc : #6 Clutch Pattern DF148033 01148033 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

57

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Dual Friction DF Disc DF PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Counterbalance T.O.B. Align Tool Pilot Bearing

FORD GALAXIE - Continued 8 CYLINDER

11 1-1/8"-26 28.0 IN/OZ NEW! 1965. - 1970. 7.0L 428" ENG. NOTE: REPLACES 11" LONG STYLE PP WITH DIAPHRAGM TYPE, w/26 SPLINE AFTERMARKET TRANS, MAY INTERFERE WITH CAST IRON BELLHOUSING. 28 IN/OZ BAL. Pressure Plate : CFT260000 700270 CALL Disc : 388144 DF388144 900270 50048 PP & Disc : #5 Clutch Pattern DF148000 11 1-3/8"-10 28.0 IN/OZ NEW! 1965. - 1970. 7.0L 428" ENG. NOTE: REPLACES 11-1/2" LONG STYLE PP WITH DIAPHRAGM TYPE, MAY INTERFERE WITH CAST IRON BELLHOUSING. 28 IN/OZ BAL. Pressure Plate : 700270 N1493 Disc : DF382559 900270 52110 PP & Disc : #6 Clutch Pattern MST559033 DF559033 NOTE: REPLACES 11" LONG STYLE PP WITH DIAPHRAGM TYPE, MAY INTERFERE WITH CAST IRON BELLHOUSING. 28 IN/OZ BAL. Pressure Plate : 700270 Disc : DF382559 900270 PP & Disc : #5 Clutch Pattern MST559000 DF559000 -

N1493 52110 -

11 1-1/8"-26 0 IN/OZ NEW! 1965. - 1971. 7.0L 427" ENG. NOTE: REPLACES 11-1/2" LONG STYLE PP WITH DIAPHRAGM TYPE, w/26 SPLINE AFTERMARKET TRANS, MAY INTERFERE WITH CAST IRON BELLHOUSING. Pressure Plate : CFT360033 11360033 700260 CALL Disc : 388144 DF388144 23388144 900260 50048 PP & Disc : #6 Clutch Pattern DF148033 01148033 NOTE: REPLACES 11" LONG STYLE PP WITH DIAPHRAGM TYPE, w/26 SPLINE AFTERMARKET TRANS, MAY INTERFERE WITH CAST IRON BELLHOUSING. Pressure Plate : CFT260000 700260 CALL Disc : 388144 DF388144 900260 50048 PP & Disc : #5 Clutch Pattern DF148000 11 1-3/8"-10 NEW! 1965. - 1971. 7.0L 427" ENG. NOTE: REPLACES 11-1/2" LONG STYLE PP WITH DIAPHRAGM TYPE, MAY INTERFERE WITH CAST IRON BELLHOUSING. Pressure Plate : 700260 Disc : DF382559 900260 PP & Disc : #6 Clutch Pattern MST559033 DF559033 NOTE: REPLACES 11" LONG STYLE PP WITH DIAPHRAGM TYPE, MAY INTERFERE WITH CAST IRON BELLHOUSING. Pressure Plate : 700260 Disc : DF382559 900260 PP & Disc : #5 Clutch Pattern MST559000 DF559000 1965. - 1971.

7.0L 429" ENG.

11

1-3/8"-10

0 IN/OZ N1493 52110 N1493 52110 0 IN/OZ

NOTE: REPLACES 11-1/2" LONG STYLE PP WITH DIAPHRAGM TYPE, MAY INTERFERE WITH CAST IRON BELLHOUSING. ZERO BAL. Pressure Plate : 700280 Disc : DF382559 PP & Disc : #6 Clutch Pattern MST559033 DF559033 -

N1493 52110 -

NOTE: REPLACES 11" LONG STYLE PP WITH DIAPHRAGM TYPE, MAY INTERFERE WITH CAST IRON BELLHOUSING. ZERO BAL. Pressure Plate : 700280 Disc : DF382559 PP & Disc : #5 Clutch Pattern MST559000 DF559000 -

N1493 52110 -

1965. - 1971.

7.0L 429" ENG.

11

1-1/8"-26

0 IN/OZ

NOTE: REPLACES 11-1/2" LONG STYLE PP WITH DIAPHRAGM TYPE, w/26 SPLINE AFTERMARKET TRANS, MAY INTERFERE WITH CAST IRON BELLHOUSING. ZERO BAL. Pressure Plate : CFT360033 11360033 700280 CALL Disc : 388144 DF388144 23388144 50048 PP & Disc : #6 Clutch Pattern DF148033 01148033 NOTE: REPLACES 11" LONG STYLE PP WITH DIAPHRAGM TYPE, w/26 SPLINE AFTERMARKET TRANS, MAY INTERFERE WITH CAST IRON BELLHOUSING. ZERO BAL. Pressure Plate : CFT260000 700280 CALL Disc : 388144 DF388144 50048 PP & Disc : #5 Clutch Pattern DF148000 1967.

4.7L 289" ENG. 3 SPD.

10

NOTE: 28 IN/OZ BAL. 157 TOOTH. O.E. CLUTCH DISC MAY BE 10-1/2" Pressure Plate : CF360030 CFT360030 Disc : 280490 280490 PP & Disc : DF490030

-

-

1-1/16"-10 700220 900220 #4 Clutch Pattern

28.0 IN/OZ N1439 52010 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

58

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Dual Friction DF Disc DF PP & Disc

Counterbalance T.O.B. Align Tool Pilot Bearing

FORD GALAXIE - Continued 8 CYLINDER

4.7L 289" ENG. 3 SPD. NEW! 1967. NOTE: 28 IN/OZ BAL. 164 TOOTH. O.E. CLUTCH DISC MAY BE 10-1/2" Pressure Plate : CF360030 CFT360030 Disc : 280490 280490 PP & Disc : DF490030 1968. - 1971.

10 -

-

-

NOTE: 28 IN/OZ BAL. 164 TOOTH. O.E. CLUTCH DISC MAY BE 10-1/2" Pressure Plate : CF360030 CFT360030 Disc : 280490 280490 PP & Disc : DF490030

-

-

1-1/16"-10 700220 900220 #4 Clutch Pattern

700240 900240 #4 Clutch Pattern

5.8L 351" ENG.

11

NOTE: 28 IN/OZ BAL. 164 TOOTH. MAY INTERFERE WITH CAST IRON BELLHOUSING. Pressure Plate : CF260000 CFT260000 Disc : 280700 280700 DF281226 PP & Disc : DF700000 1970. - 1972.

#4 Clutch Pattern

10 -

1970. - 1972.

700240 900240

5.0L 302" ENG.

NOTE: 28 IN/OZ BAL. 157 TOOTH. O.E. CLUTCH DISC MAY BE 10-1/2" Pressure Plate : CF360030 CFT360030 Disc : 280490 280490 PP & Disc : DF490030

1-1/16"-10

-

1-1/16"-10 700240 900240 #5 Clutch Pattern

5.8L 351" ENG.

11

1-1/8"-26

NOTE: 28 IN/OZ BAL. 164 TOOTH. w/26 SPLINE AFTERMARKET TRANS, MAY INTERFERE WITH CAST IRON BELLHOUSING. Pressure Plate : CFT260000 700240 Disc : 388144 DF388144 900240 PP & Disc : #5 Clutch Pattern DF148000 -

28.0 IN/OZ N1439 52010 28.0 IN/OZ N1439 52010 N1439 52010 28.0 IN/OZ N1439 52010 28.0 IN/OZ N1439 50048 -

GRANADA, LTD 4 CYLINDER 1980. - 1983. Pressure Plate : Disc : PP & Disc :

2.3L 140" ENG. CF360024 * 281203 -

8-1/2 -

DF203024

-

*

-

1"-23 # Clutch Pattern

N1705 52008 -

6 CYLINDER 1974. - 1980.

4.1L 250" ENG.

10

NOTE: O.E. CLUTCH DISC MAY BE 10-1/2" Pressure Plate : CF360030 CFT360030 Disc : 280490 280490 PP & Disc : -

DF490030

-

-

1-1/16"-10 # Clutch Pattern

N1714 52010 -

8 CYLINDER 1975. - 1979.

5.0L 302" ENG.

10

NOTE: 28 IN/OZ BAL. 157 TOOTH. O.E. CLUTCH DISC MAY BE 10-1/2" Pressure Plate : CF360030 CFT360030 Disc : 280490 280490 PP & Disc : DF490030

-

-

NOTE: 28 IN/OZ BAL. 164 TOOTH. O.E. CLUTCH DISC MAY BE 10-1/2" Pressure Plate : CF360030 CFT360030 Disc : 280490 280490 PP & Disc : DF490030

-

-

-

-

1-1/16"-10 700220 900220 #4 Clutch Pattern

700240 900240 #4 Clutch Pattern

28.0 IN/OZ N1714 52010 N1714 52010 -

MUSTANG, MUSTANG II, COBRA 4 CYLINDER 1974. - 1978. Pressure Plate : Disc : PP & Disc : 1974. - 1986.

2.3L 140" ENG. 4 SPD FORD TRANS. CF360024 * 281220 -

8-1/2 DF220024

*

2.3L 140" ENG. 4 SPD. NON-TURBO

NOTE: GERMAN TRANS Pressure Plate : CF360024 * Disc : 281203 PP & Disc : -

-

# Clutch Pattern

8-1/2 DF203024

-

*

1-1/16"-10 -

-

N1714 52010 -

1"-23 # Clutch Pattern

N1705 52008 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

59

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Dual Friction DF Disc DF PP & Disc

Counterbalance T.O.B. Align Tool Pilot Bearing

FORD MUSTANG, MUSTANG II, COBRA - Continued 4 CYLINDER

1979. - 1982. Pressure Plate : Disc : PP & Disc :

2.3L 140" ENG. 4 & 5 SPD w/TURBO CF360024 * 281220 -

1979. - 1983.

2.3L 140" ENG. 4 SPD NON-TURBO

NOTE: FORD TRANS. Pressure Plate : CF360024 Disc : 281220 PP & Disc : -

*

-

1979.08 - 1980.09 2.3L 140" ENG. 5 SPD. NON-TURBO Pressure Plate : CF360024 * Disc : 281203 PP & Disc : 1980.10 - 1980.11 2.3L 140" ENG. 5 SPD. NON-TURBO Pressure Plate : CF360024 * Disc : 281220 PP & Disc : -

8-1/2 DF220024

-

*

-

-

*

-

DF203024

-

*

DF220024

-

*

-

1983. Pressure Plate : Disc : PP & Disc :

2.3L 140" ENG. 5 SPD FORD TRANS. CF360024 * 281203 -

1983. - 1986. Pressure Plate : Disc : PP & Disc :

2.3L 140" ENG. EXC.SVO OPTION CF360035 CFT360035 281228 281228 -

DF228035

11228035 23228035 01228035

-

1984. - 1988. Pressure Plate : Disc : PP & Disc :

2.3L 140" ENG. w/SVO TURBO OPTION CF360035 CFT360035 281228 281228 DF228035

11228035 23228035 01228035

-

-

*

-

-

*

-

-

9

-

*

1-1/16"-10 # Clutch Pattern

1-1/16"-10 # Clutch Pattern

8-1/2 DF220024

1"-23 # Clutch Pattern

9

2.3L 140" ENG. 5 SPD. NON-TURBO

1"-23 # Clutch Pattern

8-1/2 DF203024

1-1/16"-10 # Clutch Pattern

8-1/2 DF203024

1"-23 # Clutch Pattern

8-1/2

2.3L 140" ENG 5 SPD. NON-TURBO CF360024 * 281203 -

NOTE: WARNER TRANS. Pressure Plate : CF360024 * Disc : 281220 PP & Disc : -

# Clutch Pattern

-

-

N1714 52010 -

1-1/16"-10 -

8-1/2

1980.12 - 1982. Pressure Plate : Disc : PP & Disc :

1987. - 1994.

# Clutch Pattern

8-1/2 DF220024

1-1/16"-10 -

N1714 52010 N1714 52008 N1714 52010 N1714 52008 N1714 52008 N1714 52010 N1714 52010 -

1-1/16"-10 # Clutch Pattern

N1714 52010 -

6 CYLINDER 1969. - 1973.

4.1L 250" ENG.

10

NOTE: O.E. CLUTCH DISC MAY BE 10-1/2" Pressure Plate : CF360030 CFT360030 Disc : 280490 280490 PP & Disc : 1994. - 2004. Pressure Plate : Disc : PP & Disc :

3.8L 232" ENG. CF361974 381974 -

2005. - 2007.

4.0L 245" ENG.

NOTE: Mfg Date to 12/4/06. Pressure Plate : Disc : PP & Disc : -

DF490030

-

-

# Clutch Pattern

11 -

DF974974

-

-

DF490309

-

1-1/16"-10 # Clutch Pattern

10 CFT363309 289040 -

1-1/16"-10

-

N1439 52010 N1714 52010 -

1-1/16"-10 # Clutch Pattern

-

8 CYLINDER 1965. - 1967.

4.7L 289" ENG - SPECIAL APPLICATION

10.4

NOTE: 10.4" DIA CLUTCH UPGRAGE REQUIRES CENTERFORCE FLYW. 28 IN/OZ BAL. Pressure Plate : 11361739 Disc : DF381021 23381021 PP & Disc : DF021739 -

LM361675 LM381021 -

1-1/16"-10 700220 900220 #2 Clutch Pattern

28.0 IN/OZ N1439 52010 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

60

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Dual Friction DF Disc DF PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Counterbalance T.O.B. Align Tool Pilot Bearing

FORD MUSTANG, MUSTANG II, COBRA - Continued 8 CYLINDER 1965. - 1967.

4.7L 289" ENG - SPECIAL APPLICATION

10.4

1-1/8"-26

NOTE: 10.4" CLUTCH UPGRAGE w/26 SPLINE AFTERMKT TRANS. REQUIRES CENTERFORCE FLYW. 28 IN/OZ BAL. Pressure Plate : 11361739 LM361675 700220 Disc : DF384611 23384611 LM384611 900220 PP & Disc : #2 Clutch Pattern DF611739 1965. - 1967.

4.7L 289" ENG. w/10" CLUTCH

10

NOTE: 28 IN/OZ BAL. 157 TOOTH. O.E. CLUTCH DISC MAY BE 10-1/2" Pressure Plate : CF360030 CFT360030 Disc : 280490 280490 PP & Disc : DF490030

-

-

NOTE: 28 IN/OZ BAL. 164 TOOTH. O.E. CLUTCH DISC MAY BE 10-1/2" Pressure Plate : CF360030 CFT360030 Disc : 280490 280490 PP & Disc : DF490030

-

-

1965. - 1973.

4.7L 289", 5.0L 302" & 5.8L 351" ENG - SPECIAL APP

1-1/16"-10 700220 900220 #4 Clutch Pattern

700240 900240 10.4

NOTE: 10.4" DIA CLUTCH UPGRAGE REQUIRES CENTERFORCE FLYW. SEE FLYW. SECTION Pressure Plate : 11361739 LM361675 Disc : DF381021 23381021 LM381021 PP & Disc : DF021739 -

28.0 IN/OZ N1439 50048 28.0 IN/OZ N1439 52010 -

#4 Clutch Pattern

N1439 52010 -

1-1/16"-10

0 IN/OZ

#2 Clutch Pattern

N1439 52010 -

1-1/8"-26

0 IN/OZ

NOTE: 10.4" CLUTCH UPGRAGE w/26 SPLINE AFTERMKT TRANS. REQUIRES CENTERFORCE FLYW. SEE FLYW. SECTION Pressure Plate : 11361739 LM361675 700225 Disc : DF384611 23384611 LM384611 900232 PP & Disc : #2 Clutch Pattern DF611739 -

N1439 50048 -

1965. - 1973.

1966. - 1969.

4.7L 289", 5.0L 302" & 5.8L 351" ENG - SPECIAL APP

10.4

6.4L 390" ENG.

11

NOTE: O.E. CLUTCH DISC MAY BE 11-1/2", DO NOT USE WITH CAST IRON BELLHOUSING Pressure Plate : CF360033 CFT360033 11360033 Disc : 281226 281226 DF281226 23281226 PP & Disc : DF226033 01226033 1966. - 1969.

700225 900232

-

6.4L 390" ENG.

1-1/16"-10 700260 900260

11

#6 Clutch Pattern

N1439 52010 -

1-1/8"-26

0 IN/OZ

NOTE: O.E. CLUTCH DISC MAY BE 11-1/2", w/26 SPLINE AFTERMARKET TRANS, MAY INTERFERE WITH CAST IRON BELLHOUSING. Pressure Plate : CFT360033 11360033 700260 Disc : 388144 DF388144 23388144 900260 PP & Disc : #6 Clutch Pattern DF148033 01148033 1968. - 1973.

5.0L 302" ENG.

10

NOTE: 28 IN/OZ BAL. 164 TOOTH. O.E. CLUTCH DISC MAY BE 10-1/2" Pressure Plate : CF360030 CFT360030 Disc : 280490 280490 PP & Disc : DF490030

-

-

NOTE: 28 IN/OZ BAL. 157 TOOTH. O.E. CLUTCH DISC MAY BE 10-1/2" Pressure Plate : CF360030 CFT360030 Disc : 280490 280490 PP & Disc : DF490030

-

-

1968. - 1974.

5.0L 302" & 5.8L 351"

1-1/16"-10 700240 900240 #4 Clutch Pattern

700220 900220 #4 Clutch Pattern

11

0 IN/OZ

1-1/8"-26

N1439 50048 28.0 IN/OZ N1439 52010 N1439 52010 28.0 IN/OZ

NOTE: 28 IN/OZ BAL. 164 TOOTH. INCLUDES COBRA JET & BOSS, w/26 SPLINE AFTERMARKET TRANS, MAY INTERFERE WITH CAST IRON BELLHOUSING. Pressure Plate : CFT260000 700240 N1439 Disc : 388144 DF388144 900240 50048 PP & Disc : #5 Clutch Pattern DF148000 1968. - 1974.

5.8L 351" ENG.

11

NOTE: 28 IN/OZ BAL. 164 TOOTH. MAY INTERFERE WITH CAST IRON BELLHOUSING. Pressure Plate : CF260000 CFT260000 Disc : 280700 280700 DF281226 PP & Disc : DF700000 1969. - 1970

-

5.0L 302" BOSS ENG.

700240 900240 #5 Clutch Pattern

10

NOTE: 28 IN/OZ BAL. 157 TOOTH. O.E. CLUTCH DISC MAY BE 10-1/2" Pressure Plate : CF360030 CFT360030 Disc : 280490 280490 PP & Disc : DF490030

-

1-1/16"-10

-

1-1/16"-10 700220 900220 #4 Clutch Pattern

28.0 IN/OZ N1439 52010 28.0 IN/OZ N1439 52010 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

61

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Dual Friction DF Disc DF PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Counterbalance T.O.B. Align Tool Pilot Bearing

FORD MUSTANG, MUSTANG II, COBRA - Continued 8 CYLINDER 1969. - 1970.

5.0L 302" BOSS ENG.

11

NOTE: w/11" CLUTCH OPTION - USE WITH AFTERMARKET 164 TOOTH FLYWHEEL ONLY. 28 IN/OZ BAL. Pressure Plate : CF260000 CFT260000 Disc : 280700 280700 DF281226 PP & Disc : DF700000 -

1-1/16"-10 700240 900240 #5 Clutch Pattern

28.0 IN/OZ N1439 52010 -

11 1-1/8"-26 28.0 IN/OZ NEW! 1969. - 1971. 7.0L 428" ENG. NOTE: REPLACES 11-1/2" LONG STYLE PP WITH DIAPHRAGM TYPE, w/26 SPLINE AFTERMARKET TRANS, MAY INTERFERE WITH CAST IRON BELLHOUSING. 28 IN/OZ BAL. Pressure Plate : CFT360033 11360033 700270 CALL Disc : 388144 DF388144 23388144 900270 50048 PP & Disc : #6 Clutch Pattern DF148033 01148033 NOTE: REPLACES 11" LONG STYLE PP WITH DIAPHRAGM TYPE, w/26 SPLINE AFTERMARKET TRANS, MAY INTERFERE WITH CAST IRON BELLHOUSING. 28 IN/OZ BAL. Pressure Plate : CFT260000 700270 CALL Disc : 388144 DF388144 900270 50048 PP & Disc : #5 Clutch Pattern DF148000 11 1-3/8"-10 28.0 IN/OZ NEW! 1969. - 1971. 7.0L 428" ENG. COBRA JET NOTE: REPLACES 11-1/2" LONG STYLE PP WITH DIAPHRAGM TYPE, MAY INTERFERE WITH CAST IRON BELLHOUSING. 28 IN/OZ BAL. Pressure Plate : 700270 N1493 Disc : DF382559 900270 52110 PP & Disc : #6 Clutch Pattern MST559033 DF559033 NOTE: REPLACES 11" LONG STYLE PP WITH DIAPHRAGM TYPE, MAY INTERFERE WITH CAST IRON BELLHOUSING. 28 IN/OZ BAL. Pressure Plate : 700270 Disc : DF382559 900270 PP & Disc : #5 Clutch Pattern MST559000 DF559000 1969. - 1971.

7.0L 429" ENG.

11

1-1/8"-26

N1493 52110 0 IN/OZ

NOTE: REPLACES 11-1/2" LONG STYLE PP WITH DIAPHRAGM TYPE, w/26 SPLINE AFTERMARKET TRANS, MAY INTERFERE WITH CAST IRON BELLHOUSING. ZERO BAL. Pressure Plate : CFT360033 11360033 700280 CALL Disc : 388144 DF388144 23388144 50048 PP & Disc : #6 Clutch Pattern DF148033 01148033 NOTE: REPLACES 11" LONG STYLE PP WITH DIAPHRAGM TYPE, w/26 SPLINE AFTERMARKET TRANS, MAY INTERFERE WITH CAST IRON BELLHOUSING. ZERO BAL. Pressure Plate : CFT260000 700280 CALL Disc : 388144 DF388144 50048 PP & Disc : #5 Clutch Pattern DF148000 1969. - 1971.

7.0L 429" ENG. COBRA JET

11

1-3/8"-10

0 IN/OZ

NOTE: REPLACES 11-1/2" LONG STYLE PP WITH DIAPHRAGM TYPE, MAY INTERFERE WITH CAST IRON BELLHOUSING. ZERO BAL. Pressure Plate : 700280 Disc : DF382559 PP & Disc : #6 Clutch Pattern MST559033 DF559033 -

N1493 52110 -

NOTE: REPLACES 11" LONG STYLE PP WITH DIAPHRAGM TYPE, MAY INTERFERE WITH CAST IRON BELLHOUSING. ZERO BAL. Pressure Plate : 700280 Disc : DF382559 PP & Disc : #5 Clutch Pattern MST559000 DF559000 -

N1493 52110 -

1972. - 1974.

5.8L 351" ENG. COBRA JET

11

NOTE: 28 IN/OZ BAL. 164 TOOTH. MAY INTERFERE WITH CAST IRON BELLHOUSING. Pressure Plate : CF260000 CFT260000 Disc : 280700 280700 DF281226 PP & Disc : DF700000 1979. - 1980.

5.0L 302" ENG.

700240 900240 #5 Clutch Pattern

10

NOTE: 28 IN/OZ BAL. 157 TOOTH. Pressure Plate : CF360025 CFT360025 Disc : 280490 280490 PP & Disc : 1981. - 1985.

-

DF490025

-

-

5.0L 302" ENG.

1-1/16"-10 700220 900220 #4 Clutch Pattern

10.4

NOTE: 10.4" DIA CLUTCH UPGRAGE REQUIRES CENTERFORCE FLYW. Pressure Plate : CF360048 CFT360048 Disc : 381021 381021 DF381021 PP & Disc : DF021048

1-1/16"-10

SEE FLYW. SECTION 11361830 LM360048 23381021 LM381021 01920830 LM021057

1-1/16"-10 700320 900320 #7 Clutch Pattern

28.0 IN/OZ N1439 52010 28.0 IN/OZ N1714 52010 50.0 IN/OZ N1714 52010 42001

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

62

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Dual Friction DF Disc DF PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Counterbalance T.O.B. Align Tool Pilot Bearing

FORD MUSTANG, MUSTANG II, COBRA - Continued 8 CYLINDER

1981. - 1985. Pressure Plate : Disc : PP & Disc :

5.0L 302" ENG. CF360025 280490 -

1986. - 1993.

5.0L 302" ENG.

NOTE: 50 IN/OZ BAL. Pressure Plate : CF360048 Disc : 381021 PP & Disc : 1986. - 1995.

10 CFT360025 280490 -

DF490025

CFT360048 381021 -

DF381021 DF021048

1996. - 1998.

CFT360057 381021 -

CFT360057 381021 -

DF381021 DF021057 DF381021 DF021057

#7 Clutch Pattern

LM360048 LM381021 LM021057

700320 900320 #7 Clutch Pattern

50.0 IN/OZ N1714 50048 42001 50.0 IN/OZ N1714 52010 42001 50.0 IN/OZ

11361830 23381021 01920830

#7 Clutch Pattern

N1714 52010 42001

10.4

1-1/8"-26

0 IN/OZ

#7 Clutch Pattern

LM360048 LM384611 LM161057

11361830 23381021 01920830

LM360048 LM381021 LM021057

4.6L 280" ENG. GT

NOTE: w/ 26 SPLINE AFTERMARKET TRANS. 8th digit of VIN# is "W" 6 BOLT CRANK. Pressure Plate : CFT360057 11361830 Disc : 384611 DF384611 23384611 PP & Disc : DF161057 01161830

LM360048 LM384611 LM161057

NOTE: w/ 26 SPLINE AFTERMARKET TRANS. 8th digit of VIN# is "X" 8 BOLT CRANK. Pressure Plate : CFT360057 11361830 Disc : 384611 DF384611 23384611 PP & Disc : DF161057 01161830

LM360048 LM384611 LM161057

1-1/16"-10

0 IN/OZ

#7 Clutch Pattern

N1714 52010 -

1-1/16"-10

0 IN/OZ

#7 Clutch Pattern

N1714 52010 42001

1-1/8"-26

0 IN/OZ

700200 900200 #7 Clutch Pattern

700205 900205

10.4 11361830 23381021 01920830

#7 Clutch Pattern

700200 900200

10.4

LM360048 LM381021 LM021057

N1714 52010 42001

N1714 50048 -

700205 900205

10.4 11361830 23381021 01920830

1-1/16"-10 -

700205 900205

LM360048 LM381021 LM021057

4.6L 280" ENG. GT

4.6L 280" ENG. GT NEW! 1996. NOTE: w/ T45 TRANS. 8th digit of VIN# is "X" 8 BOLT CRANK. Pressure Plate : CF360057 CFT360057 Disc : 381021 381021 DF381021 PP & Disc : DF021057

N1714 52010 42001

10.4 LM360048 LM381021 LM021057

11361830 23384611 01161830

700320 900320

10.4 DF381021 DF920830

1-1/16"-10

50.0 IN/OZ

LM360048 LM381021 LM021057

4.6L 280" DOHC 32 VALVE CORBA CFT361830 380920 -

1-1/16"-10

N1714 52010 -

11361830 23381021 01920830

4.6L 280" DOHC 32 VALVE COBRA

NOTE: w/ T45 TRANS. 8th digit of VIN# is "W" 6 BOLT CRANK. Pressure Plate : CF360057 CFT360057 Disc : 381021 381021 DF381021 PP & Disc : DF021057 1996. - 2001.01

11361830 23381021 01920830

1-1/8"-26 700320 900320

10.4

SALEEN MUSTANG'S -

NOTE: 8 BOLT CRANK. Pressure Plate : CF361830 Disc : 380920 PP & Disc : 1996. - 2001.01

LM360048 LM384611 LM161057

5.0L 302" ENG.

NOTE: 8 BOLT CRANK, w/ 26 SPLINE AFTERMARKET TRANS Pressure Plate : CFT361830 Disc : 384611 DF384611 PP & Disc : DF161830 1996. - 1998.

#7 Clutch Pattern

10.4 DF381021 DF021057

1-1/16"-10 700320 900320

10.4 11361830 23384611 01161830

1-1/16"-10 # Clutch Pattern

LM360048 LM381021 LM021057

5.0L 302" ENG. COBRA

NOTE: 50 IN/OZ BAL. Pressure Plate : CF360057 Disc : 381021 PP & Disc : 1994. - 1999. Pressure Plate : Disc : PP & Disc :

11361830 23381021 01920830

5.0L 302" ENG.

NOTE: 50 IN/OZ BAL. Pressure Plate : CF360057 Disc : 381021 PP & Disc : 1994. - 1995.

10.4

NOTE: 50 IN/OZ BAL. w/26 SPLINE AFTERMARKET TRANS. Pressure Plate : CFT360057 Disc : 384611 DF384611 PP & Disc : DF161057 1993. - 1995.

-

N1714 50048 42001

#7 Clutch Pattern

N1714 50048 42001

1-1/16"-10

0 IN/OZ

700205 900205 #7 Clutch Pattern

N1714 52010 42001

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

63

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Dual Friction DF Disc DF PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Counterbalance T.O.B. Align Tool Pilot Bearing

FORD MUSTANG, MUSTANG II, COBRA - Continued 8 CYLINDER 1999. - 2002.

4.6L 280" DOHC 32 VALVE COBRA

11

NOTE: 6 BOLT CRANK Pressure Plate : CF360075 Disc : 380800 PP & Disc : -

CFT360075 380800 -

DF380800 DF800075

11360075 23281226 01800075

LM360075 LM281226 LM800075

NOTE: 8 BOLT CRANK Pressure Plate : CF360075 Disc : 380800 PP & Disc : -

CFT360075 380800 -

DF380800 DF800075

11360075 23281226 01800075

LM360075 LM281226 LM800075

1999. - 2004.

4.6L 280" DOHC ENG. w/26 SPL. AFTMKT TRANS.

700200 900200 #18 Clutch Pattern

700205 900205 #18 Clutch Pattern

11

NOTE: 6 BOLT CRANK. DO NOT RE-USE O.E. ALUM. FLYWHEEL SEE CENTERFORCE FLYW. SECTION Pressure Plate : CFT360075 11360075 LM360075 Disc : 388144 DF388144 23388144 LM388144 PP & Disc : DF148075 01148075 LM148075

4.6L 280" ENG. GT w/TR3650 TRANS.

#18 Clutch Pattern

CFT360075 380800 -

DF380800 DF800075

11360075 23281226 01800075

LM360075 LM281226 LM800075

NOTE: 8 BOLT CRANK Pressure Plate : CF360075 Disc : 380800 PP & Disc : -

CFT360075 380800 -

DF380800 DF800075

11360075 23281226 01800075

LM360075 LM281226 LM800075

2001.02 - 2004.

4.6L 280" ENG. GT 11360075 23388144 01148075

LM360075 LM388144 LM148075

NOTE: 6 BOLT CRANK, w/ 26 SPLINE AFTERMARKET TRANS Pressure Plate : CFT360075 Disc : 388144 DF388144 PP & Disc : DF148075

11360075 23388144 01148075

LM360075 LM388144 LM148075

4.6L 280" DOHC GT NON-SUPERCHARGED

NOTE: 6 BOLT CRANK Pressure Plate : CF360075 Disc : 380800 PP & Disc : -

CFT360075 380800 -

DF380800 DF800075

11360075 23281226 01800075

LM360075 LM281226 LM800075

NOTE: 8 BOLT CRANK Pressure Plate : CF360075 Disc : 380800 PP & Disc : -

CFT360075 380800 -

DF380800 DF800075

11360075 23281226 01800075

LM360075 LM281226 LM800075

2003. - 2004.

4.6L 280" DOHC SUPERCHARGED COBRA

NOTE: DO NOT RE-USE O.E. ALUM. FLYWHEEL SEE CENTERFORCE FLYW. SECTION Pressure Plate : 11360075 Disc : DF380800 23281226 PP & Disc : DF800075 01800075 2005. - 2010.

4.6L 280" SOHC 3V ENG. GT

1-1/8"-26 700205 900205 #18 Clutch Pattern

900200 900200

N1714 50048 42001

N1714 52010 42001 N1714 52010 42001 0 IN/OZ N1714 50048 42001

#18 Clutch Pattern

N1714 50048 42001

1-1/16"-10

0 IN/OZ

900200 900200 #18 Clutch Pattern

700205 900205

N1714 52010 42001

#18 Clutch Pattern

N1714 52010 42001

1-1/16"-10

0 IN/OZ

700205 900205

11

0 IN/OZ

0 IN/OZ

#18 Clutch Pattern

LM360075 LM281226 LM800075

N1714 52010 42001

1-1/16"-10

700205 900205

11

N1714 52010 42001

#18 Clutch Pattern

#18 Clutch Pattern

11

0 IN/OZ

N1714 50048 42001

700200 900200

11

NOTE: 8 BOLT CRANK, w/ 26 SPLINE AFTERMARKET TRANS Pressure Plate : CFT360075 Disc : 388144 DF388144 PP & Disc : DF148075

2003. - 2004.

700205 900205

11

NOTE: 6 BOLT CRANK Pressure Plate : CF360075 Disc : 380800 PP & Disc : -

1-1/8"-26 700200 900200

NOTE: 8 BOLT CRANK. DO NOT RE-USE O.E. ALUM. FLYWHEEL SEE CENTERFORCE FLYW. SECTION Pressure Plate : CFT360075 11360075 LM360075 Disc : 388144 DF388144 23388144 LM388144 PP & Disc : DF148075 01148075 LM148075 2001.02 - 2004.

1-1/16"-10

#18 Clutch Pattern

N1714 52010 42001

1-1/16"-10

0 IN/OZ

NOTE: 6 BOLT CRANK. DFX & LM CLUTCH REQUIRES CENTERFORCE FLYWHEEL - SEE FLYWHEEL SECTION Pressure Plate : 11360679 LM360679 700210 Disc : DF380800 23281226 LM281226 900210 PP & Disc : #18 Clutch Pattern DF611679 01611679 LM611679

52010 42001

NOTE: AFTER MARKET 8 BOLT CRANK. DFX & LM CLUTCH REQUIRES CENTERFORCE FLYWHEEL - SEE FLYWHEEL SECTION Pressure Plate : 11360679 LM360679 700215 Disc : DF380800 23281226 LM281226 900215 PP & Disc : #18 Clutch Pattern DF611679 01611679 LM611679

52010 42001

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

64

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Dual Friction DF Disc DF PP & Disc

Counterbalance T.O.B. Align Tool Pilot Bearing

FORD MUSTANG, MUSTANG II, COBRA - Continued 8 CYLINDER 2005. - 2010.

4.6L 280" SOHC ENG. GT w/26 SPL. AFTMKT TRANS.

11

NOTE: 6 BOLT CRANK. REQUIRES CENTERFORCE FLYWHEEL - SEE FLYWHEEL SECTION Pressure Plate : 11360679 Disc : DF388144 23388144 PP & Disc : DF148679 01148679

LM360679 LM388144 LM148679

700210 900210 #18 Clutch Pattern

NOTE: AFTER MARKET 8 BOLT CRANK. REQUIRES CENTERFORCE FLYWHEEL - SEE FLYWHEEL SECTION Pressure Plate : 11360679 LM360679 Disc : DF388144 23388144 LM388144 PP & Disc : DF148679 01148679 LM148679 2006 - 2009.1

5.4L SUPERCHARGED GT500 SHELBY

1-1/8"-26

11

700215 900215 #18 Clutch Pattern

1-1/8"-26

NOTE: 11" SINGLE DISC REPLACES ***OE 9" TWIN ONLY***. REQUIRES CENTERFORCE FLYWHEEL - SEE FLYWHEEL SECTION Pressure Plate : 11570841 LM570063 700215 Disc : DF388144 23388144 LM388144 900215 PP & Disc : #18 Clutch Pattern DF570841 01570841 LM570841 2009 - 2010

5.4L SUPERCHARGED COBRA JET

11

NOTE: REQUIRES CENTERFORCE FLYWHEEL - SEE FLYWHEEL SECTION Pressure Plate : Disc : PP & Disc : 01441003 5.0L 302" 32 VALVE w/6 SPD NEW! 2011 NOTE: DFX REQUIRES CENTERFORCE FLYWHEEL-SEE FLYWHEEL SECTION Pressure Plate : 11367500 Disc : 23280023 PP & Disc : DF023500 01023500

-

1-1/8"-26 700215 900215 #18 Clutch Pattern

11 -

1"-23 700215 900215 #18 Clutch Pattern

0 IN/OZ 50048 42001 50048 42001 0 IN/OZ 50048 42001 0 IN/OZ 50048 42001 0 IN/OZ -

PANTERA 8 CYLINDER 1969. - 1971.

351" & 302" ENG. w/-1 TRANS. (MANGUSTA)

10.4

NOTE: REQUIRES CENTERFORCE FLYWHEEL - SEE FLYWHEEL LISTING Pressure Plate : Disc : PP & Disc : DF132057S 1972. - EOP.

-

-

700250-48 900250-48 #16 Clutch Pattern

351" PANTERA w/-2 TRANS.

10.4

NOTE: REQUIRES CENTERFORCE FLYWHEEL - SEE FLYWHEEL LISTING Pressure Plate : Disc : DF381021 PP & Disc : DF021057S

-

-

-

-

-

-

1-1/8"-10

1-1/16"-10 700250-48 900250-48 #16 Clutch Pattern

28.0 IN/OZ 28.0 IN/OZ 52010 -

PINTO 4 CYLINDER 1971. - 1980. Pressure Plate : Disc : PP & Disc :

2.0L 122" & 2.3L 140" ENG. CF360024 * 281203 -

8-1/2 DF203024

*

1"-23 700310 #1 Clutch Pattern

0 IN/OZ N1705 52008 -

PROBE, GT 4 CYLINDER 1988. - 1992. Pressure Plate : Disc : PP & Disc :

2.2L 135" ENG. NON-TURBO -

1988. - 1992. Pressure Plate : Disc : PP & Disc :

2.2L 135" ENG. TURBO CF300500 CFT500300

1993. - 1997. Pressure Plate : Disc : PP & Disc :

2.0L 122" ENG. CF003900

8-7/8 DF111812

# Clutch Pattern

9-1/2 DF500300

-

-

DF900003

11900003 23543056 01900003

1"-23 # Clutch Pattern

8-7/8 -

15/16"-22 -

-

15/16"-22 # Clutch Pattern

091 50005 091 52008 091 50005 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

65

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Dual Friction DF Disc DF PP & Disc

Counterbalance T.O.B. Align Tool Pilot Bearing

FORD PROBE, GT - Continued 6 CYLINDER

1993. - 1997. Pressure Plate : Disc : PP & Disc :

2.5L 153" V-6 ENG. CF056543 CFT543056

8-7/8 DF543056

11543056 23543056 01543056

-

15/16"-22 # Clutch Pattern

091 50005 -

RANCHERO 6 CYLINDER 1970. - 1973.

4.1L 250" ENG.

10

NOTE: O.E. CLUTCH DISC MAY BE 10-1/2" Pressure Plate : CF360030 CFT360030 Disc : 280490 280490 PP & Disc : -

DF490030

-

-

1-1/16"-10 # Clutch Pattern

N1439 52010 -

8 CYLINDER 1967. - 1969.

6.4L 390" ENG.

11

NOTE: ZERO BAL. MAY INTERFERE WITH CAST IRON BELLHOUSING. Pressure Plate : CF260000 CFT260000 Disc : 280700 280700 DF281226 PP & Disc : DF700000 1967. - 1969.

-

-

700260 900260

6.4L 390" ENG.

11

NOTE: ZERO BAL. w/26 SPLINE AFTERMARKET TRANS, MAY INTERFERE WITH CAST IRON BELLHOUSING. Pressure Plate : CFT260000 Disc : 388144 DF388144 PP & Disc : DF148000 1970. - 1973.

5.0L 302" ENG. 3 SPD

10

NOTE: 28 IN/OZ BAL. 157 TOOTH. O.E. CLUTCH DISC MAY BE 10-1/2" Pressure Plate : CF360030 CFT360030 Disc : 280490 280490 PP & Disc : DF490030 1970. - 1974.

-

-

#5 Clutch Pattern

1-1/8"-26

0 IN/OZ

700260 900260 #5 Clutch Pattern

1-1/16"-10

#4 Clutch Pattern

11 -

0 IN/OZ N1439 52010 -

700220 900220

5.8L 351" ENG.

NOTE: 28 IN/OZ BAL. 164 TOOTH. MAY INTERFERE WITH CAST IRON BELLHOUSING. Pressure Plate : CF260000 CFT260000 Disc : 280700 280700 DF281226 PP & Disc : DF700000 -

1-1/16"-10

1-1/16"-10 700240 900240 #5 Clutch Pattern

11 1-1/8"-26 NEW! 1970. - 1974. 5.8L 351" ENG. NOTE: 28 IN/OZ BAL. 164 TOOTH. w/26 SPLINE AFTERMARKET TRANS, MAY INTERFERE WITH CAST IRON BELLHOUSING. Pressure Plate : CFT260000 700240 Disc : 388144 DF388144 900240 PP & Disc : #5 Clutch Pattern DF148000 -

N1439 50048 28.0 IN/OZ N1439 52010 28.0 IN/OZ N1439 52010 28.0 IN/OZ N1439 50048 -

TAURUS 6 CYLINDER 1989. - 1990. Pressure Plate : Disc : PP & Disc :

3.0L 183" ENG. SHO -

1989. - 1990.

3.0L 183" ENG. SHO

9-1/4 -

3.0L 183" ENG. SHO -

-

*

-

DF346345

-

*

-

DF346345

-

-

11228035 23228035 01228035

-

*

N1752 52012 -

7/8"-20 # Clutch Pattern

9-3/4 -

7/8"-20 # Clutch Pattern

9-3/4

NOTE: (WITH EXT. SERVICE PROGRAM # 91M73) Pressure Plate : Disc : PP & Disc : 1991. - 1995. Pressure Plate : Disc : PP & Disc :

DF090086

7/8"-20 # Clutch Pattern

N1752 52012 N1752 52012 -

THUNDERBIRD 4 CYLINDER 1983. - 1988. Pressure Plate : Disc : PP & Disc :

2.3L 140" ENG. TURBO & NON-TURBO CF360035 CFT360035 281228 281228 DF228035

9

1-1/16"-10 # Clutch Pattern

N1714 52010 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

66

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Dual Friction DF Disc DF PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Counterbalance T.O.B. Align Tool Pilot Bearing

FORD THUNDERBIRD - Continued 6 CYLINDER

1989. - 1993. Pressure Plate : Disc : PP & Disc :

3.8L 231" ENG. SUPERCHARGER SC CF360049 CFT360049 281226 281226 -

11 DF281226 DF226049

11360049 23281226 01226049

-

1-1/16"-10 # Clutch Pattern

N1754 52010 -

TORINO 6 CYLINDER 1970. - 1973.

4.1L 250" ENG.

10

NOTE: O.E. CLUTCH DISC MAY BE 10-1/2" Pressure Plate : CF360030 CFT360030 Disc : 280490 280490 PP & Disc : -

DF490030

-

-

1-1/16"-10 # Clutch Pattern

N1439 52010 -

8 CYLINDER 11 1-1/8"-26 0 IN/OZ NEW! 1969. - 1971. 7.0L 427" ENG. NOTE: REPLACES 11-1/2" LONG STYLE PP WITH DIAPHRAGM TYPE, w/26 SPLINE AFTERMARKET TRANS, MAY INTERFERE WITH CAST IRON BELLHOUSING. Pressure Plate : CFT360033 11360033 700260 CALL Disc : 388144 DF388144 23388144 900260 50048 PP & Disc : #6 Clutch Pattern DF148033 01148033 NOTE: REPLACES 11" LONG STYLE PP WITH DIAPHRAGM TYPE, w/26 SPLINE AFTERMARKET TRANS, MAY INTERFERE WITH CAST IRON BELLHOUSING. Pressure Plate : CFT260000 700260 CALL Disc : 388144 DF388144 900260 50048 PP & Disc : #5 Clutch Pattern DF148000 11 1-3/8"-10 NEW! 1969. - 1971. 7.0L 427" ENG. NOTE: REPLACES 11-1/2" LONG STYLE PP WITH DIAPHRAGM TYPE, MAY INTERFERE WITH CAST IRON BELLHOUSING. Pressure Plate : 700260 Disc : DF382559 900260 PP & Disc : #6 Clutch Pattern MST559033 DF559033 NOTE: REPLACES 11" LONG STYLE PP WITH DIAPHRAGM TYPE, MAY INTERFERE WITH CAST IRON BELLHOUSING. Pressure Plate : 700260 Disc : DF382559 900260 PP & Disc : #5 Clutch Pattern MST559000 DF559000 1969. - 1971.

11

N1493 52110 N1493 52110 -

1-3/8"-10

0 IN/OZ

NOTE: REPLACES 11-1/2" LONG STYLE PP WITH DIAPHRAGM TYPE, MAY INTERFERE WITH CAST IRON BELLHOUSING. Pressure Plate : 700280 Disc : DF382559 PP & Disc : #6 Clutch Pattern MST559033 DF559033 -

N1493 52110 -

NOTE: REPLACES 11" LONG STYLE PP WITH DIAPHRAGM TYPE, MAY INTERFERE WITH CAST IRON BELLHOUSING. Pressure Plate : 700280 Disc : DF382559 PP & Disc : #5 Clutch Pattern MST559000 DF559000 -

N1493 52110 -

1969. - 1971.

7.0L 429" ENG.

0 IN/OZ

7.0L 429" ENG.

11

1-1/8"-26

0 IN/OZ

NOTE: REPLACES 11-1/2" LONG STYLE PP WITH DIAPHRAGM TYPE, w/26 SPLINE AFTERMARKET TRANS, MAY INTERFERE WITH CAST IRON BELLHOUSING. Pressure Plate : CFT360033 11360033 700280 CALL Disc : 388144 DF388144 23388144 50048 PP & Disc : #6 Clutch Pattern DF148033 01148033 NOTE: REPLACES 11" LONG STYLE PP WITH DIAPHRAGM TYPE, w/26 SPLINE AFTERMARKET TRANS, MAY INTERFERE WITH CAST IRON BELLHOUSING. Pressure Plate : CFT260000 700280 CALL Disc : 388144 DF388144 50048 PP & Disc : #5 Clutch Pattern DF148000 1969. - 1973.

5.0L 302" ENG.

10

NOTE: 28 IN/OZ BAL. 157 TOOTH. O.E. CLUTCH DISC MAY BE 10-1/2" Pressure Plate : CF360030 CFT360030 Disc : 280490 280490 PP & Disc : DF490030

-

-

1-1/16"-10 700220 900220 #4 Clutch Pattern

28.0 IN/OZ N1439 52010 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

67

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Dual Friction DF Disc DF PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Counterbalance T.O.B. Align Tool Pilot Bearing

FORD TORINO - Continued 8 CYLINDER

NEW! 1969. - 1973. 5.0L 302" ENG. NOTE: 28 IN/OZ BAL. 164 TOOTH. O.E. CLUTCH DISC MAY BE 10-1/2" Pressure Plate : CF360030 CFT360030 Disc : 280490 280490 PP & Disc : DF490030 1969. - 1974.

10 -

-

1-1/16"-10 700240 900240 #4 Clutch Pattern

5.0L 302" & 5.8L 351" ENG

11

1-1/8"-26

NOTE: 28 IN/OZ BAL. 164 TOOTH. w/26 SPLINE AFTERMARKET TRANS, MAY INTERFERE WITH CAST IRON BELLHOUSING. Pressure Plate : CFT260000 700240 Disc : 388144 DF388144 900240 PP & Disc : #5 Clutch Pattern DF148000 1969. - 1974.

5.8L 351" ENG.

11

NOTE: 28 IN/OZ BAL. 164 TOOTH. MAY INTERFERE WITH CAST IRON BELLHOUSING. Pressure Plate : CF260000 CFT260000 Disc : 280700 280700 DF281226 PP & Disc : DF700000 1973. - 1974.

-

700240 900240 #5 Clutch Pattern

5.0L 302" ENG. 3 SPD H.D.

NOTE: 28 IN/OZ BAL. 164 TOOTH. Pressure Plate : CF260000 CFT260000 Disc : 280700 280700 PP & Disc : -

11 DF281226 DF700000

-

1-1/16"-10

-

1-1/16"-10 700240 900240 #5 Clutch Pattern

28.0 IN/OZ N1439 52010 28.0 IN/OZ N1439 50048 28.0 IN/OZ N1439 52010 28.0 IN/OZ N1439 52010 -

TORNADO 6 CYLINDER 2006.

4.0L ENG. TURBO 6 SPD

NOTE: (EXPORT ONLY) Pressure Plate : Disc : PP & Disc : -

-

263 DF932057

-

10.4 -

1"-23 -

-

# Clutch Pattern

TYPHOON 6 CYLINDER 2006.

4.0L ENG. TURBO 6 SPD

NOTE: (EXPORT ONLY) Pressure Plate : Disc : PP & Disc : -

-

263

10.4

DF932057

-

-

DF009032

-

-

1"-23 # Clutch Pattern

-

FORD LIGHT TRUCK, SUV & VAN AEROSTAR 4 CYLINDER 1986. - 1987. Pressure Plate : Disc : PP & Disc :

2.3L 140" ENG. CF360032 381009 -

1988. - 1992. Pressure Plate : Disc : PP & Disc :

2.3L 140" ENG. CF360032 381009 -

8-7/8 CFT360032 381009 -

# Clutch Pattern

8-7/8 CFT360032 381009 -

DF009032

-

-

CFT360032 381009 -

DF009032

-

-

1"-23 1"-23 # Clutch Pattern

N1738 52008 N1754 52008 -

6 CYLINDER 1986. - 1987. Pressure Plate : Disc : PP & Disc :

2.8L 171" ENG. CF360032 381009 -

1986. - 1987. Pressure Plate : Disc : PP & Disc :

3.0L 179" ENG. CF360032 381009 -

8-7/8

# Clutch Pattern

8-7/8 CFT360032 381009 -

DF009032

-

1"-23 -

-

1"-23 # Clutch Pattern

N1738 52008 N1738 52008 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

68

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Dual Friction DF Disc DF PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Counterbalance T.O.B. Align Tool Pilot Bearing

FORD LIGHT TRUCK, SUV & VAN AEROSTAR - Continued 6 CYLINDER

1988. - 1992. Pressure Plate : Disc : PP & Disc :

3.0L 179" ENG. CF360032 381009 -

1993. - 1994. Pressure Plate : Disc : PP & Disc :

3.0L 179" ENG. CF360032 381009 -

8-7/8 CFT360032 381009 -

DF009032

-

-

# Clutch Pattern

8-7/8 CFT360032 381009 -

DF009032

-

1"-23 -

-

1"-23 # Clutch Pattern

N1754 52008 N1750 52008 -

BRONCO 6 CYLINDER 1980. - 1982.

4.9L 300" ENG.

11

NOTE: DO NOT USE DFX WITH CAST IRON BELL HOUSING. Pressure Plate : CF360049 CFT360049 Disc : 281226 281226 DF281226 PP & Disc : DF226049 1981. - 1982. Pressure Plate : Disc : PP & Disc :

4.2L 255" ENG. CF360030 280490 -

1983. Pressure Plate : Disc : PP & Disc :

3.8L 230" ENG. CF360030 280490 -

1983.

-

# Clutch Pattern

10 CFT360030 280490 -

DF184030

-

-

CFT360030 280490 -

DF184030

-

-

4.9L 300" ENG. w/MECH. LINKAGE

1983. - 1987. Pressure Plate : Disc : PP & Disc :

4.9L 300" ENG. UNDER 8500 GVW CF360030 CFT360030 280490 280490 -

1988. - 1993. Pressure Plate : Disc : PP & Disc :

4.9L 300" ENG. 4 SPD CF360030 CFT360030 280490 280490 -

1988. - 1993. Pressure Plate : Disc : PP & Disc :

4.9L 300" ENG. 5 SPD. EXC. H.D. CF360030 CFT360030 280490 280490 -

-

-

# Clutch Pattern

-

DF184030

-

-

-

-

4.9L 300" ENG. 5 SPD H.D. 11360049 23281226 01226049

1-1/16"-10 # Clutch Pattern

11

NOTE: DO NOT USE DFX WITH CAST IRON BELL HOUSING. Pressure Plate : CF360049 CFT360049 Disc : 281226 281226 DF281226 PP & Disc : DF226049

1-1/16"-10 # Clutch Pattern

10 DF184030

1-1/16"-10 # Clutch Pattern

10

-

N1439 52010 N1714 52010 N1714 52010 -

1-1/16"-10 -

10 DF184030

1-1/16"-10 # Clutch Pattern

11 11360049 23281226 01226049

1-1/16"-10 # Clutch Pattern

10

NOTE: DO NOT USE DFX WITH CAST IRON BELL HOUSING. Pressure Plate : CF360049 CFT360049 Disc : 281226 281226 DF281226 PP & Disc : DF226049

1988. - 1994.

11360049 23281226 01226049

1-1/16"-10

N1714 52010 N1714 52010 N1714 52010 N1754 52010 -

1-1/16"-10 # Clutch Pattern

N1754 52010 -

8 CYLINDER 1967. - 1977.

5.0L 302" ENG

11

NOTE: 28 IN/OZ BAL. 164 TOOTH. w/26 SPLINE AFTERMARKET TRANS. Pressure Plate : CFT260000 Disc : 388144 DF388144 PP & Disc : DF148000 1967. - 1977.

-

-

5.0L 302" ENG.

700240 900240 #5 Clutch Pattern

11

NOTE: 28 IN/OZ BAL. 164 TOOTH. Pressure Plate : CF260000 CFT260000 Disc : 280700 280700 PP & Disc : -

DF281226 DF700000

-

1-1/8"-26

-

1-1/16"-10 700240 900240 #5 Clutch Pattern

28.0 IN/OZ N1439 50048 28.0 IN/OZ N1439 52010 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

69

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Dual Friction DF Disc DF PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Counterbalance T.O.B. Align Tool Pilot Bearing

FORD LIGHT TRUCK, SUV & VAN BRONCO - Continued 8 CYLINDER

NEW! 1967. - 1979. 5.0L 302" ENG. 5SPD H.D. NOTE: 28 IN/OZ BAL. 164 TOOTH. WITH AFTERMARKET TRANS. Pressure Plate : Disc : PP & Disc : MST735000 DF735000 1977. - 1980.

DF281226 DF226552

11165552 23281226 01226552

-

-

11360049 23281226 01226049

#8 Clutch Pattern

-

5.0L 302" ENG. UNDER 8500 GVW CF360030 CFT360030 280490 280490 -

1984. - 1986. Pressure Plate : Disc : PP & Disc :

5.8L 351" ENG. UNDER 8500 GVW CF360030 CFT360030 280490 280490 -

11360049 23281226 01226049

#8 Clutch Pattern

-

#8 Clutch Pattern

-

DF184030

-

-

5.0L 302" ENG. 11360049 23281226 01226049

-

5.0L 302" ENG. 4 SPD.

NOTE: DO NOT USE DFX WITH CAST IRON BELL HOUSING. Pressure Plate : CF360049 CFT360049 Disc : 281226 281226 DF281226 PP & Disc : DF226049

#8 Clutch Pattern

-

28.0 IN/OZ N1439 52010 28.0 IN/OZ N1439 52010 50.0 IN/OZ N1439 52010 50.0 IN/OZ -

N1439 52010 50.0 IN/OZ N1714 52010 -

N1714 52010 N1714 52010 N1714 52010 -

1-1/16"-10 -

11 11360049 23281226 01226049

1-1/16"-10 #4 Clutch Pattern

11

NOTE: DO NOT USE DFX WITH CAST IRON BELL HOUSING. Pressure Plate : CF360049 CFT360049 Disc : 281226 281226 DF281226 PP & Disc : DF226049

1-1/16"-10 #4 Clutch Pattern

10

-

1-1/16"-10 -

10 DF184030

1-1/16"-10 700242 900242

-

28.0 IN/OZ

1-1/16"-10 -

11

1984. - 1985. Pressure Plate : Disc : PP & Disc :

1988. - 1993.

#5 Clutch Pattern

-

5.8L 351" ENG.

1-1/8"-10 700242 900242

11

NOTE: DO NOT USE DFX WITH CAST IRON BELL HOUSING. Pressure Plate : CF360049 CFT360049 Disc : 281226 281226 DF281226 PP & Disc : DF226049

1986. - 1987.

#8 Clutch Pattern

-

5.0L 302" ENG.

1-1/16"-10 700242 900242

11

NOTE: 50 IN/OZ BAL. 164 TOOTH. DO NOT USE DFX WITH CAST IRON BELL HOUSING. Pressure Plate : CF360049 CFT360049 11360049 Disc : 281226 281226 DF281226 23281226 PP & Disc : DF226049 01226049 1983.

#6 Clutch Pattern

-

5.8L 351" ENG.

1-1/16"-10 700290 -

11

NOTE: DO NOT USE DFX WITH CAST IRON BELL HOUSING. Pressure Plate : CF360049 CFT360049 Disc : 281226 281226 DF281226 PP & Disc : DF226049 1983.

#3 Clutch Pattern

11

5.0L 302" ENG. 5SPD H.D.

1-1/16"-10 700290 -

-

5.0L 302" ENG.

NOTE: 50 IN/OZ BAL. 164 TOOTH. WITH AFTERMARKET TRANS. Pressure Plate : Disc : PP & Disc : MST735000 DF735000 1981. - 1982.

#5 Clutch Pattern

12 DF384200 DF200015

1-1/8"-10 700240 900240

LM165552 LM281226 LM226552

6.5L 400" ENG.

NOTE: 50 IN/OZ BAL. 164 TOOTH. DO NOT USE DFX WITH CAST IRON BELL HOUSING. Pressure Plate : CF360049 CFT360049 11360049 Disc : 281226 281226 DF281226 23281226 PP & Disc : DF226049 01226049 1980. - 1994.

11

NOTE: 28 IN/OZ BAL. 176 TOOTH. Pressure Plate : CF261015 CFT261015 Disc : 384200 384200 PP & Disc : 1980. - 1983.

-

5.8L 351" ENG.

NOTE: 28 IN/OZ BAL. 176 TOOTH. Pressure Plate : CF165552 CFT165552 Disc : 281226 281226 PP & Disc : 1977. - 1982.

11

N1714 52010 -

1-1/16"-10 #8 Clutch Pattern

N1754 52010 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

70

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Dual Friction DF Disc DF PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Counterbalance T.O.B. Align Tool Pilot Bearing

FORD LIGHT TRUCK, SUV & VAN BRONCO - Continued 8 CYLINDER 1988. - 1994.

5.8L 351" ENG.

11

NOTE: DO NOT USE DFX WITH CAST IRON BELL HOUSING. Pressure Plate : CF360049 CFT360049 Disc : 281226 281226 DF281226 PP & Disc : DF226049 1993. - 1997.

11360049 23281226 01226049

-

#8 Clutch Pattern

5.0L 302" ENG. 5 SPD.

11

NOTE: DO NOT USE DFX WITH CAST IRON BELL HOUSING. Pressure Plate : CF360049 CFT360049 Disc : 281226 281226 DF281226 PP & Disc : DF226049

11360049 23281226 01226049

-

-

-

1-1/16"-10 N1754 52010 -

1-1/16"-10 #8 Clutch Pattern

N1750 52010 -

BRONCO II 4 CYLINDER 1985. - 1987. Pressure Plate : Disc : PP & Disc :

2.0L 122" & 2.3L 140" ENG. CF360032 CFT360032 381009 381009 -

1988. - 1990. Pressure Plate : Disc : PP & Disc :

2.0L 122" & 2.3L 140" ENG. CF360032 CFT360032 381009 381009 -

8-7/8 DF009032

# Clutch Pattern

8-7/8 DF009032

-

-

DF009032

-

-

1"-23 1"-23 # Clutch Pattern

N1738 52008 N1754 52008 -

6 CYLINDER 1984. Pressure Plate : Disc : PP & Disc :

2.8L 171" ENG. CF360032 381009 -

8-7/8

1985. - 1987. Pressure Plate : Disc : PP & Disc :

2.8L & 2.9L ENG. CF360032 CFT360032 381009 381009 -

1988. - 1990. Pressure Plate : Disc : PP & Disc :

2.9L 173" ENG. CF360032 381009 -

CFT360032 381009 -

# Clutch Pattern

8-7/8 DF009032

-

-

DF009032

-

1"-23 # Clutch Pattern

8-7/8 CFT360032 381009 -

1"-23 -

-

1"-23 # Clutch Pattern

N1714 52008 N1738 52008 N1754 52008 -

E-SERIES 100 - 350 & ECONOLINE VAN 6 CYLINDER 1965. - 1971.

4.0L 240" ENG. 3 SPD STD

NOTE: O.E. CLUTCH DISC MAY BE 10-1/2" Pressure Plate : CF360030 CFT360030 Disc : 280490 280490 PP & Disc : 1968. - 1971. Pressure Plate : Disc : PP & Disc :

4.0L 240" ENG. 3 SPD H.D. CF260000 CFT260000 280700 280700 -

1972. - 1976. Pressure Plate : Disc : PP & Disc :

4.0L 240" ENG. CF260000 280700 -

1973. - 1977. Pressure Plate : Disc : PP & Disc :

4.9L 300" ENG. CF260000 280700 -

1978. - 1979.

4.9L 300" ENG.

10 DF184030

-

-

# Clutch Pattern

11 DF281226 DF700000

-

-

DF281226 DF700000

-

-

DF281226 DF700000

-

-

11360049 23281226 01226049

1-1/16"-10 # Clutch Pattern

11

NOTE: DO NOT USE DFX WITH CAST IRON BELL HOUSING. Pressure Plate : CF360049 CFT360049 Disc : 281226 281226 DF281226 PP & Disc : DF226049

1-1/16"-10 # Clutch Pattern

11 CFT260000 280700 -

1-1/16"-10 # Clutch Pattern

11 CFT260000 280700 -

1-1/16"-10

-

N1439 52010 N1439 52010 N1439 52010 N1439 52010 -

1-1/16"-10 # Clutch Pattern

N1439 52010 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

71

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Dual Friction DF Disc DF PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Counterbalance T.O.B. Align Tool Pilot Bearing

FORD LIGHT TRUCK, SUV & VAN E-SERIES 100 - 350 & ECONOLINE VAN - Continued 6 CYLINDER 1980. - 1982.

4.9L 300" ENG. w/11" CLUTCH

11

NOTE: DO NOT USE DFX WITH CAST IRON BELL HOUSING. Pressure Plate : CF360049 CFT360049 Disc : 281226 281226 DF281226 PP & Disc : DF226049 1983. - 1987.

11360049 23281226 01226049

4.9L 300" ENG. E250-350

1988. - 1990.

CFT360030 280490 -

DF184030

-

4.9L 300" ENG. H.D. w/ 11" CLUTCH

4.9L 300" ENG. w/10" CLUTCH CF360030 CFT360030 280490 280490 -

# Clutch Pattern

-

11360049 23281226 01226049

# Clutch Pattern

-

DF184030

-

# Clutch Pattern

-

N1714 52010 -

1-1/16"-10 -

10

N1714 52010 -

1-1/16"-10 -

11

N1439 52010 -

1-1/16"-10 -

10

NOTE: DO NOT USE DFX WITH CAST IRON BELL HOUSING. Pressure Plate : CF360049 CFT360049 Disc : 281226 281226 DF281226 PP & Disc : DF226049 1988. - 1993. Pressure Plate : Disc : PP & Disc :

# Clutch Pattern

-

4.9L 300"ENG. E100-250

NOTE: UNDER 8500 GVW Pressure Plate : CF360030 Disc : 280490 PP & Disc : -

11

NOTE: OVER 8500 GVW. DO NOT USE DFX WITH CAST IRON BELL HOUSING. Pressure Plate : CF360049 CFT360049 11360049 Disc : 281226 281226 DF281226 23281226 PP & Disc : DF226049 01226049 1983. - 1987.

-

1-1/16"-10

1-1/16"-10 # Clutch Pattern

N1754 52010 N1754 52010 -

8 CYLINDER 1968. - 1977.

5.0L 302" & 5.8L 351" ENG

11

NOTE: w/26 SPLINE AFTERMARKET TRANS. 28 IN/OZ BALANCE. Pressure Plate : CFT260000 Disc : 388144 DF388144 PP & Disc : DF148000 1968. - 1977.

CFT260000 280700 -

DF281226 DF700000

-

CFT260000 280700 -

DF281226 DF700000

-

-

#5 Clutch Pattern

#5 Clutch Pattern

-

#8 Clutch Pattern

-

1-1/16"-10 700290 #8 Clutch Pattern

11

NOTE: DO NOT USE DFX WITH CAST IRON BELL HOUSING. 50 IN/OZ BALANCE. Pressure Plate : CF360049 CFT360049 11360049 Disc : 281226 281226 DF281226 23281226 PP & Disc : DF226049 01226049

1-1/16"-10 700240 900240

11

5.0L 302" ENG. E100-350 w/11" CLUTCH

1-1/16"-10 700240 900240

11

5.8L 351" ENG.

1-1/16"-10 700240 900240

-

5.0L 302" ENG.

NOTE: DO NOT USE DFX WITH CAST IRON BELL HOUSING. 28 IN/OZ BALANCE. Pressure Plate : CF360049 CFT360049 11360049 Disc : 281226 281226 DF281226 23281226 PP & Disc : DF226049 01226049 1980. - 1982.

#5 Clutch Pattern

11

NOTE: DO NOT USE DFX WITH CAST IRON BELL HOUSING. 28 IN/OZ BALANCE. Pressure Plate : CF360049 CFT360049 11360049 Disc : 281226 281226 DF281226 23281226 PP & Disc : DF226049 01226049 1978. - 1982.

700240 900240 11

5.8L 351" ENG.

NOTE: 28 IN/OZ BALANCE. Pressure Plate : CF260000 Disc : 280700 PP & Disc : 1978. - 1979.

-

5.0L 302" ENG.

NOTE: 28 IN/OZ BALANCE. Pressure Plate : CF260000 Disc : 280700 PP & Disc : 1975. - 1977.

-

1-1/8"-26

-

1-1/16"-10 700242 900242 #8 Clutch Pattern

28 IN/OZ N1439 50048 28 IN/OZ N1439 52010 28 IN/OZ N1439 52010 28 IN/OZ N1439 52010 28 IN/OZ N1439 52010 50 IN/OZ N1439 52010 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

72

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Dual Friction DF Disc DF PP & Disc

Counterbalance T.O.B. Align Tool Pilot Bearing

FORD LIGHT TRUCK, SUV & VAN E-SERIES 100 - 350 & ECONOLINE VAN - Continued 8 CYLINDER 1983.

5.0L 302" ENG. E350

11

NOTE: DO NOT USE DFX WITH CAST IRON BELL HOUSING. 50 IN/OZ BALANCE. Pressure Plate : CF360049 CFT360049 11360049 Disc : 281226 281226 DF281226 23281226 PP & Disc : DF226049 01226049 1983. - 1986.

-

700242 900242 #8 Clutch Pattern

5.0L 302" ENG. E100-250

10

NOTE: UNDER 8500 GVW. 50 IN/OZ BALANCE. Pressure Plate : CF360030 CFT360030 Disc : 280490 280490 PP & Disc : NEW! 1983. - 1986. 5.8L 351" ENG. E100-250 NOTE: UNDER 8500 GVW Pressure Plate : CF360030 CFT360030 Disc : 280490 280490 PP & Disc : 1984. - 1987.

DF184030

-

-

-

#4 Clutch Pattern

-

#4 Clutch Pattern

11

NOTE: OVER 8500 GVW. DO NOT USE DFX WITH CAST IRON BELL HOUSING. 50 IN/OZ BALANCE. Pressure Plate : CF360049 CFT360049 11360049 Disc : 281226 281226 DF281226 23281226 PP & Disc : DF226049 01226049 -

1987.05 - 1994. Pressure Plate : Disc : PP & Disc :

7.3L 445" DIESEL ENG. CF360065 381040 -

1988. - 1994.

-

-

#8 Clutch Pattern

-

11360049 23281226 01226049

-

#8 Clutch Pattern

11 -

50 IN/OZ N1714 52010 -

N1714 52010 50 IN/OZ N1714 52010 -

N1714 52010 N1754 52075 -

1-1/16"-10 -

5.0L 302" ENG. 4 & 5 SPD

NOTE: DO NOT USE DFX WITH CAST IRON BELL HOUSING. 50 IN/OZ BALANCE. Pressure Plate : CF360049 CFT360049 11360049 Disc : 281226 281226 DF281226 23281226 PP & Disc : DF226049 01226049

1-1/4"-10 # Clutch Pattern

11

N1714 52010 -

1-1/16"-10 -

5.8L 351" ENG. 4 & 5 SPD

NOTE: DO NOT USE DFX WITH CAST IRON BELL HOUSING. Pressure Plate : CF360049 CFT360049 Disc : 281226 281226 DF281226 PP & Disc : DF226049 1988. - 1995.

#8 Clutch Pattern

11 DF040065

1-1/16"-10 700242 900242

11

50 IN/OZ

1-1/16"-10 -

5.0L 302" ENG. E150-350

NEW! 1984. - 1987. 5.8L 351" ENG. E150-350 NOTE: OVER 8500 GVW. DO NOT USE DFX WITH CAST IRON BELL HOUSING. Pressure Plate : CF360049 CFT360049 11360049 Disc : 281226 281226 DF281226 23281226 PP & Disc : DF226049 01226049

1-1/16"-10 700242 900242

10 DF184030

1-1/16"-10

1-1/16"-10 700242 900242 #8 Clutch Pattern

N1754 52010 50 IN/OZ N1754 52010 -

ESCAPE 4 CYLINDER 2001. - 2004. Pressure Plate : Disc : PP & Disc :

2.0L ENG. -

225 -

DF007507

CFT116116

DF116116

8-7/8

*

-

-

*

-

-

15/16"-22 # Clutch Pattern

N1710 50005 -

EXPLORER 6 CYLINDER 1991. - 1992. Pressure Plate : Disc : PP & Disc :

4.0L 244" ENG. -

1993. - 1997. Pressure Plate : Disc : PP & Disc :

4.0L 244" ENG. -

10

*

# Clutch Pattern

10 CFT116116

*

DF116116

-

*

1"-23 -

-

1"-23 # Clutch Pattern

N1754 52008 N1750 52008 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

73

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Dual Friction DF Disc DF PP & Disc

Counterbalance T.O.B. Align Tool Pilot Bearing

FORD LIGHT TRUCK, SUV & VAN EXPLORER - Continued 6 CYLINDER

1998. - 2000. Pressure Plate : Disc : PP & Disc :

4.0L 244" ENG. -

10-1/8

2001. - 2003. Pressure Plate : Disc : PP & Disc :

4.0L 244" ENG. -

2001. - 2003. Pressure Plate : Disc : PP & Disc :

4.0L 244" ENG. SPORT TRAC -

CFT116116

DF993993

-

*

-

# Clutch Pattern

10-1/8" -

DF145117

-

*

-

*

-

-

*

-

-

1"-23 # Clutch Pattern

10-1/8" DF145117

1"-23 -

1"-23 # Clutch Pattern

52008 52008 52008 -

F-SERIES F-100 - F-550 10 CYLINDER 1999. - 2007. Pressure Plate : Disc : PP & Disc :

6.8L 414" ENG. V-10 F250-550 CF361940 * 381940 -

12 DF940940

1-1/4"-10 # Clutch Pattern

52075 -

6 CYLINDER 1965.

4.0L 240" ENG.

10

NOTE: O.E. CLUTCH DISC MAY BE 10-1/2" Pressure Plate : CF360030 CFT360030 Disc : 280490 280490 PP & Disc : -

DF184030

1965. - 1977. Pressure Plate : Disc : PP & Disc :

4.9L 300" ENG. TO CHASSIS #Y80000 CF260000 CFT260000 280700 280700 DF281226 DF700000

1966. - 1976. Pressure Plate : Disc : PP & Disc :

3.3L 200" & 3.9L 240" ENG. CF260000 CFT260000 280700 280700 -

1977. - 1979.

1983.

# Clutch Pattern

-

-

-

# Clutch Pattern

-

CFT360030 280490 -

DF184030

-

# Clutch Pattern

-

4.9L 300" ENG. w/MECHANICAL LINKAGE 11360049 23281226 01226049

-

4.9L 300" ENG.

# Clutch Pattern

-

N1439 52010 -

N1439 52010 -

N1439 52010 N1714 52010 -

1-1/16"-10 -

11

NOTE: OVER 8500 GVW. DO NOT USE DFX WITH CAST IRON BELL HOUSING. Pressure Plate : CF360049 CFT360049 11360049 Disc : 281226 281226 DF281226 23281226 PP & Disc : DF226049 01226049

1-1/16"-10 # Clutch Pattern

11

N1439 52010 -

1-1/16"-10 -

10

N1439 52010 -

1-1/16"-10 -

11 11360049 23281226 01226049

1-1/16"-10 # Clutch Pattern

11 11360049 23281226 01226049

1-1/16"-10 # Clutch Pattern

-

4.9L 300" ENG. w/11" CLUTCH

NOTE: DO NOT USE DFX WITH CAST IRON BELL HOUSING. Pressure Plate : CF360049 CFT360049 Disc : 281226 281226 DF281226 PP & Disc : DF226049 1984. - 1986.

-

4.9L 300" ENG. FROM CHASSIS Y80001

3.8L 230" ENG. CF360030 280490 -

11

DF281226 DF700000

NOTE: DO NOT USE DFX WITH CAST IRON BELL HOUSING. Pressure Plate : CF360049 CFT360049 Disc : 281226 281226 DF281226 PP & Disc : DF226049 1983. Pressure Plate : Disc : PP & Disc :

-

11

NOTE: DO NOT USE DFX WITH CAST IRON BELL HOUSING. Pressure Plate : CF360049 CFT360049 Disc : 281226 281226 DF281226 PP & Disc : DF226049 1980. - 1982.

-

1-1/16"-10

N1714 52010 -

1-1/16"-10 # Clutch Pattern

N1714 52010 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

74

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Dual Friction DF Disc DF PP & Disc

Counterbalance T.O.B. Align Tool Pilot Bearing

FORD LIGHT TRUCK, SUV & VAN F-SERIES F-100 - F-550 - Continued 6 CYLINDER 1984. - 1987.

4.9L 300" ENG.

NOTE: UNDER 8500 GVW Pressure Plate : CF360030 Disc : 280490 PP & Disc : 1987.

10 CFT360030 280490 -

DF184030

-

1988. - 1993.

4.9L 300" ENG. 4 SPD CF360030 CFT360030 280490 280490 -

11360049 23281226 01226049

DF184030

-

11360049 23281226 01226049

# Clutch Pattern

-

-

# Clutch Pattern

-

# Clutch Pattern

10 DF184030

-

-

# Clutch Pattern

11

4.2L 256" ENG. CF983982 *

DF281226 DF226049

11360049 23281226 01226049

-

-

DF983982

*

-

-

N1750 52010 -

N1714 52010 -

1-1/16"-10 # Clutch Pattern

11-1/2

N1750 52010 -

1-1/16"-10 -

4.9L 300" ENG.

N1754 52010 -

1-1/16"-10 -

4.9L 300" ENG. 5 SPD

N1754 52010 -

1-1/16"-10 -

10

N1714 52010 -

1-1/16"-10 -

4.9L 300" ENG. 5 SPD

NOTE: INTERNAL SLAVE CYL. Pressure Plate : CF360049 CFT360049 Disc : 281226 281226 PP & Disc : 1997. - 2005.08 Pressure Plate : Disc : PP & Disc :

11

DF184030

1-1/16"-10 # Clutch Pattern

11

4.9L 300" ENG.

NOTE: EXTERNAL SLAVE CYL. Pressure Plate : CF360030 CFT360030 Disc : 280490 280490 PP & Disc : 1995. - 1997.

# Clutch Pattern

-

N1714 52010 -

1-1/16"-10 -

4.9L 300" ENG. 5 SPD H.D.

NOTE: UNDER 8500 GVW; INTERNAL SLAVE CYL. Pressure Plate : CF360030 CFT360030 Disc : 280490 280490 PP & Disc : 1993. - 1998.

10

NOTE: OVER 8500 GVW. DO NOT USE DFX WITH CAST IRON BELL HOUSING. Pressure Plate : CF360049 CFT360049 11360049 Disc : 281226 281226 DF281226 23281226 PP & Disc : DF226049 01226049 1993. - 1994.

# Clutch Pattern

11

NOTE: DO NOT USE DFX WITH CAST IRON BELL HOUSING. Pressure Plate : CF360049 CFT360049 Disc : 281226 281226 DF281226 PP & Disc : DF226049 1993. - 1994.

-

4.9L 300" ENG. 4 SPD HD

NOTE: DO NOT USE DFX WITH CAST IRON BELL HOUSING. Pressure Plate : CF360049 CFT360049 Disc : 281226 281226 DF281226 PP & Disc : DF226049 1988. - 1993. Pressure Plate : Disc : PP & Disc :

-

1-1/16"-10

1-1/16"-10 # Clutch Pattern

N1750 52010 N1750 52010 -

8 CYLINDER 1965. - 1968. Pressure Plate : Disc : PP & Disc :

352" ENG. CF260000 280700 -

CFT260000 280700 -

DF281226 DF700000

-

-

11

1965. - 1968. Pressure Plate : Disc : PP & Disc :

5.9L 358" ENG. CF260000 280700 -

CFT260000 280700 -

DF281226 DF700000

-

-

1966. - 1971. Pressure Plate : Disc : PP & Disc :

5.8L 351" ENG. CF260000 280700 -

# Clutch Pattern

11

DF281226 DF700000

-

1-1/16"-10 # Clutch Pattern

11 CFT260000 280700 -

1-1/16"-10 -

-

1-1/16"-10 700240 900240 #5 Clutch Pattern

N1439 52010 N1439 52010 28.0 IN/OZ N1439 52010 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

75

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Dual Friction DF Disc DF PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Counterbalance T.O.B. Align Tool Pilot Bearing

FORD LIGHT TRUCK, SUV & VAN F-SERIES F-100 - F-550 - Continued 8 CYLINDER 1966. - 1971.

5.8L 351" ENG.

11

NOTE: w/26 SPLINE AFTERMARKET TRANS, w/26 SPLINE AFTERMARKET TRANS. Pressure Plate : CFT260000 Disc : 388144 DF388144 PP & Disc : DF148000 1967. - 1974. Pressure Plate : Disc : PP & Disc : Pressure Plate : Disc : PP & Disc :

6.4L 390" ENG. CF261015 384200 CF261015 384200 -

1968. - 1974. Pressure Plate : Disc : PP & Disc :

5.9L 360" ENG. CF260000 280700 -

NEW! 1975. - 1976. 5.9L 360" ENG. Pressure Plate : CF260000 Disc : 280700 PP & Disc : -

CFT261015 384200 CFT261015 384200 -

DF384200 DF200015 DF384200 DF200015

-

CFT260000 280700 -

DF281226 DF700000

-

CFT261015 384200 -

DF384200 DF200015

-

1980. - 1983.

DF281226 DF700000

-

-

-

-

DF281226 DF226552

11165552 23281226 01226552

DF384200 DF200015

-

1-1/16"-10 -

1-1/16"-10

1-1/16"-10

#3 Clutch Pattern

1-1/16"-10 # Clutch Pattern

-

1-1/16"-10 700242 900242 #8 Clutch Pattern

11 -

N1439 52010 N1439 52010 -

1-1/8"-26

700290 -

11

NOTE: DO NOT USE DFX WITH CAST IRON BELL HOUSING. 28 IN/OZ BALANCE. Pressure Plate : CF360049 CFT360049 11360049 Disc : 281226 281226 DF281226 23281226 PP & Disc : DF226049 01226049

0 IN/OZ

#8 Clutch Pattern

-

5.8L 351" ENG.

1-1/16"-10

700240 900240

LM165552 LM281226 LM226552

5.0L 302" ENG. w/11" CLUTCH

#5 Clutch Pattern

N1439 50048 -

#5 Clutch Pattern

12 CFT261015 384200 -

0 IN/OZ

-

-

0 IN/OZ N1439 52010 N1439 52010 -

1-1/8"-26

#5 Clutch Pattern

11

N1439 50048 -

#5 Clutch Pattern

#6 Clutch Pattern

-

28.0 IN/OZ

0 IN/OZ N1439 52010 -

700280 -

11 CFT165552 281226 -

1-1/16"-10 700260 900260

700260 900260

11

NOTE: DO NOT USE DFX WITH CAST IRON BELL HOUSING. 50 IN/OZ BALANCE. Pressure Plate : CF360049 CFT360049 11360049 Disc : 281226 281226 DF281226 23281226 PP & Disc : DF226049 01226049 1981. - 1982.

#6 Clutch Pattern

11

5.8L 351M ENG.

6.5L 400" ENG. CF261015 384200 -

700260 900260

11 CFT260000 280700 -

1-1/16"-10 700260 900260 #6 Clutch Pattern

-

5.0L 302" ENG. FROM CHASSIS Y80001

NOTE: 28 IN/OZ BALANCE. Pressure Plate : CF165552 Disc : 281226 PP & Disc : 1977. - 1982. Pressure Plate : Disc : PP & Disc :

-

12

NOTE: DO NOT USE DFX WITH CAST IRON BELL HOUSING. 28 IN/OZ BALANCE. Pressure Plate : CF360049 CFT360049 11360049 Disc : 281226 281226 DF281226 23281226 PP & Disc : DF226049 01226049 1977. - 1980.

#5 Clutch Pattern

11

NEW! 1975. - 1976. 5.9L 360" ENG. NOTE: w/26 SPLINE AFTERMARKET TRANS, w/26 SPLINE AFTERMARKET TRANS. Pressure Plate : CFT260000 Disc : 388144 DF388144 PP & Disc : DF148000 1977. - 1979.

700240 900240 12

NEW! 1968. - 1974. 5.9L 360" ENG. NOTE: w/26 SPLINE AFTERMARKET TRANS, w/26 SPLINE AFTERMARKET TRANS. Pressure Plate : CFT260000 Disc : 388144 DF388144 PP & Disc : DF148000 NEW! 1969. - 1976. 6.4L 390" ENG. NOTE: 40 LB FLYWHEEL. Pressure Plate : CF261015 Disc : 384200 PP & Disc : -

-

1-1/8"-26

1-1/16"-10 700290 #8 Clutch Pattern

N1439 50048 28 IN/OZ N1439 52010 28 IN/OZ N1439 52010 N1439 52010 50 IN/OZ N1714 52010 28 IN/OZ N1439 52010 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

76

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Dual Friction DF Disc DF PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Counterbalance T.O.B. Align Tool Pilot Bearing

FORD LIGHT TRUCK, SUV & VAN F-SERIES F-100 - F-550 - Continued 8 CYLINDER 1983.

5.8L 351" ENG.

11

NOTE: DO NOT USE DFX WITH CAST IRON BELL HOUSING. 28 IN/OZ BALANCE. Pressure Plate : CF360049 CFT360049 11360049 Disc : 281226 281226 DF281226 23281226 PP & Disc : DF226049 01226049 1983. - 1987.

6.9L DIESEL ENG. 12" UPGRADE W/ SOLID FLYWHEEL

NOTE: USE WITH O.E. UPGRADED FLYWHEEL Pressure Plate : CF261015 CFT261015 Disc : 384200 384200 PP & Disc : 1983. - 1987.05

700240 900240 #8 Clutch Pattern

12

DF384200 DF200015

-

-

6.9L DIESEL ENG. DF011033

-

# Clutch Pattern

-

7.5L 460" ENG. w/11" CLUTCH

# Clutch Pattern

1-1/16"-10

NOTE: O.E. CLUTCH DISC MAY BE 11-1/2", DO NOT USE WITH CAST IRON BELLHOUSING. 24 IN/OZ BALANCE. Pressure Plate : CF360033 CFT360033 11360033 700330 Disc : 281226 281226 DF281226 23281226 PP & Disc : #6 Clutch Pattern DF226033 01226033 1983. - 1987.05

7.5L 460" ENG. w/11" CLUTCH

11

NOTE: O.E. CLUTCH DISC MAYBE 11-1/2", w/26 SPLINE AFTERMARKET TRANS. 24 IN/OZ BALANCE. Pressure Plate : CFT360033 11360033 Disc : 388144 DF388144 23388144 PP & Disc : DF148033 01148033 1983. - 1987.05

7.5L 460" ENG. w/12" CLUTCH (HD OPTION)

NOTE: 24 IN/OZ BALANCE. Pressure Plate : CF261015 Disc : 384200 PP & Disc : 1984. - 1986.

CFT261015 384200 -

-

#6 Clutch Pattern

-

5.0L 302" ENG. w/10" CLUTCH

NOTE: UNDER 8500 GVW. 50 IN/OZ BALANCE. Pressure Plate : CF360030 CFT360030 Disc : 280490 280490 PP & Disc : 1984. - 1986.

DF384200 DF200015

-

#6 Clutch Pattern

-

5.0L 302" ENG. w/11" CLUTCH

#4 Clutch Pattern

11

5.8L 351" ENG. w/10" CLUTCH

NOTE: UNDER 8500 GVW. 28 IN/OZ BALANCE. Pressure Plate : CF360030 CFT360030 Disc : 280490 280490 PP & Disc : 1984. - 1987.

-

#8 Clutch Pattern

-

5.8L 351" ENG. w/11" CLUTCH

#4 Clutch Pattern

11

5.0L 302" ENG.

1-1/16"-10 700240 900240 #8 Clutch Pattern

11

NOTE: DO NOT USE DFX WITH CAST IRON BELL HOUSING. 50 IN/OZ BALANCE. Pressure Plate : CF360049 CFT360049 11360049 Disc : 281226 281226 DF281226 23281226 PP & Disc : DF226049 01226049

1-1/16"-10 700240 900240

NOTE: OVER 8500 GVW. DO NOT USE DFX WITH CAST IRON BELL HOUSING. 28 IN/OZ BALANCE. Pressure Plate : CF360049 CFT360049 11360049 Disc : 281226 281226 DF281226 23281226 PP & Disc : DF226049 01226049 1987.

1-1/16"-10 700242 900242

10 DF184030

1-1/16"-10 700242 900242

NOTE: OVER 8500 GVW. DO NOT USE DFX WITH CAST IRON BELL HOUSING. 50 IN/OZ BALANCE. Pressure Plate : CF360049 CFT360049 11360049 Disc : 281226 281226 DF281226 23281226 PP & Disc : DF226049 01226049 1984. - 1987.

1-1/16"-10 700330 -

10 DF184030

1-1/8"-26 700330 -

12

-

N1714 52010 -

N1714 52010 -

1-1/16"-10 -

11

28 IN/OZ

1-1/16"-10 -

11

NOTE: O.E. CLUTCH DISC MAY BE 11-1/2" Pressure Plate : CF360033 CFT360033 Disc : 381011 381011 PP & Disc : 1983. - 1987.05

-

1-1/16"-10

1-1/16"-10 700242 900242 #8 Clutch Pattern

N1714 52010 24 IN/OZ N1714 52010 24 IN/OZ N1714 50048 24 IN/OZ N1714 52010 50 IN/OZ N1714 52010 50 IN/OZ N1714 52010 28 IN/OZ N1714 52010 28 IN/OZ N1714 52010 50 IN/OZ N1714 52010 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

77

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Dual Friction DF Disc DF PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Counterbalance T.O.B. Align Tool Pilot Bearing

FORD LIGHT TRUCK, SUV & VAN F-SERIES F-100 - F-550 - Continued 8 CYLINDER 1987.

6.9L DIESEL ENG. 5 SPD TRANS

NOTE: USE WITH DMF, SPRUNG DISC HUB. Pressure Plate : CF360065 Disc : 381040 PP & Disc : 1987. - 1994.

11 DF040065

-

-

7.3L DIESEL INDIRECT INJ. 8th DIGIT VIN 'M'

-

1987.05 - 1994.

7.5L 460" ENG. CF360058 381030 -

12-1/4 -

DF030058

-

1988. - 1992.

1988. - 1992.

1993. - 1994.

1993. - 1994.

1993. - 1998. Pressure Plate : Disc : PP & Disc :

-

#8 Clutch Pattern

11 -

#8 Clutch Pattern

-

#8 Clutch Pattern

-

1-1/4"-10 # Clutch Pattern

5.0L 302" ENG. 5 SPD

11 -

1-1/16"-10 700242 900242 #8 Clutch Pattern

12-1/4 -

1-1/16"-10 700240 900240

12-1/4

DF968968

1-1/16"-10 700240 900240

11

-

1-1/16"-10 700240 900240

5.8L 351" ENG.

7.5L 460" ENG. CF361968 381968 -

1-1/16"-10

#8 Clutch Pattern

5.8L 351" ENG. 5 SPD

NOTE: DO NOT USE DFX WITH CAST IRON BELL HOUSING. 50 IN/OZ BALANCE. Pressure Plate : CF360049 CFT360049 11360049 Disc : 281226 281226 DF281226 23281226 PP & Disc : DF226049 01226049

1-1/16"-10

700242 900242 11

-

N1753 52075 N1753 52075 -

1-1/4"-10

#8 Clutch Pattern

-

7.3L TURBO DIESEL INDIRECT INJ. w/ FACTORY TURBO

1-1/4"-10 -

700242 900242

5.8L 351" ENG. 4 SPD

NOTE: INCLUDES SINGLE MASS FLYWHEEL. REF. FORD TSB # 95-4-9, 8th digit VIN 'C'or'K' Pressure Plate : Disc : PP & Disc : DF305828 1993. - 1997.

11

NOTE: DO NOT USE DFX WITH CAST IRON BELL HOUSING. 28 IN/OZ BALANCE. Pressure Plate : CF360049 CFT360049 11360049 Disc : 281226 281226 DF281226 23281226 PP & Disc : DF226049 01226049

# Clutch Pattern

# Clutch Pattern

5.0L 302" ENG. 5 SPD

NOTE: DO NOT USE DFX WITH CAST IRON BELL HOUSING. 28 IN/OZ BALANCE. Pressure Plate : CF360049 CFT360049 11360049 Disc : 281226 281226 DF281226 23281226 PP & Disc : DF226049 01226049

-

11

NOTE: DO NOT USE DFX WITH CAST IRON BELL HOUSING. 28 IN/OZ BALANCE. Pressure Plate : CF360049 CFT360049 11360049 Disc : 281226 281226 DF281226 23281226 PP & Disc : DF226049 01226049 1988. - 1992.

-

5.0L 302" ENG. 4 SPD

NOTE: DO NOT USE DFX WITH CAST IRON BELL HOUSING. 50 IN/OZ BALANCE. Pressure Plate : CF360049 CFT360049 11360049 Disc : 281226 281226 DF281226 23281226 PP & Disc : DF226049 01226049

1-1/4"-10

# Clutch Pattern

11

NOTE: DO NOT USE DFX WITH CAST IRON BELL HOUSING. 50 IN/OZ BALANCE. Pressure Plate : CF360049 CFT360049 11360049 Disc : 281226 281226 DF281226 23281226 PP & Disc : DF226049 01226049 1988. - 1992.

-

7.3L DIESEL F-250-F-450 . SPRUNG DISC HUB.

NOTE: USE WITH DMF FOR 11" CLUTCH. AFTERMARKET TURBO OR HD OPTION Pressure Plate : CF360065 Disc : 381040 PP & Disc : DF040065 -

N1753 52075

# Clutch Pattern

12-1/4

NOTE: NON-TURBO or w/ AFTERMARKET TURBO. FLYW UPGRADE. INCLUDES SINGLE MASS FLYWHEEL Pressure Plate : Disc : PP & Disc : DF305827 1987.05 - 1992. Pressure Plate : Disc : PP & Disc :

1-1/4"-10

1-1/4"-10 # Clutch Pattern

N1753 52075 50 IN/OZ N1714 52010 50 IN/OZ N1754 52010 28 IN/OZ N1714 52010 28 IN/OZ N1754 52010 28 IN/OZ N1750 52010 N1753 52075 50 IN/OZ N1750 52010 N1753 52075 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

78

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Dual Friction DF Disc DF PP & Disc

Counterbalance T.O.B. Align Tool Pilot Bearing

FORD LIGHT TRUCK, SUV & VAN F-SERIES F-100 - F-550 - Continued 8 CYLINDER 1994. - 1997.

7.3L TURBO DIESEL SMF OPTION F250-450

13

NOTE: INCLUDES SINGLE MASS FLYWHEEL. 1994 8th DIGIT VIN 'F' 1995-97 ALL Pressure Plate : Disc : PP & Disc : DF444440 1994. - 1998.

7.3L D.I. TURBO DIESEL F450 ONLY

NOTE: DMF. w/SPRUNG DISC HUB. Pressure Plate : CF360303 Disc : 381067 PP & Disc : 1994. - 1998.

-

1995. - 1998. Pressure Plate : Disc : PP & Disc :

5.8L 351" ENG. CF361976 381976 -

1997. - 1998. Pressure Plate : Disc : PP & Disc :

4.6L 280" ENG. CF983982 *

1999. - 2004. Pressure Plate : Disc : PP & Disc :

4.6L 280" ENG. F150 & F250 CF361941 * 381942 -

DF067303

-

-

-

-

-

# Clutch Pattern

-

DF983982

-

*

# Clutch Pattern

-

-

*

-

-

# Clutch Pattern

13 -

*

13

DF219188

*

-

-

-

-

1-3/8" -10 -

6.4L DIESEL F250-F550

NOTE: USE W/ SINGLE MASS FLYWHEEL Pressure Plate : Disc : PP & Disc : -

1-3/8"-10 -

6.0L DIESEL F250-F550 DF219188

1-1/16"-10 # Clutch Pattern

13 01935944

1-1/16"-10 # Clutch Pattern

7.3L DIESEL SUPER DUTY 6 SPD. F250-550 DF935944

1-1/16"-10 #5 Clutch Pattern

11.5 DF942941

1-1/4"-10 -

11-1/2 -

1-1/4"-10 -

12-1/4

DF063303

-

NOTE: USE W/ SINGLE MASS FLYWHEEL Pressure Plate : Disc : PP & Disc : 2008.

# Clutch Pattern

11-1/2

NOTE: INCLUDES SINGLE MASS FLYWHEEL Pressure Plate : Disc : PP & Disc : 2003. - 2007.

12-1/4

7.3L D.I.TURBO DIESEL F250-350 ONLY

NOTE: DMF, w/SOLID DISC HUB. Pressure Plate : CF360303 Disc : 381063 PP & Disc : -

1999. - 2004.

-

1-1/4"-10

N1753 52075 N1753 52075 N1753 52075 N1750 52010 N1750 52010 52010 N4170 52110 INCLUDED -

# Clutch Pattern

-

1-3/8" -10

-

# Clutch Pattern

-

RANGER 4 CYLINDER 1983. - 1984. Pressure Plate : Disc : PP & Disc :

2.0L 122" & 2.3L 140" ENG. CF360032 CFT360032 381009 381009 -

1985. - 1987. Pressure Plate : Disc : PP & Disc :

2.0L 122" & 2.3L 140" ENG. CF360032 CFT360032 381009 381009 -

1988. - 1992. Pressure Plate : Disc : PP & Disc :

2.0L 122" & 2.3L 140" ENG. CF360032 CFT360032 381009 381009 -

8-7/8 DF009032

# Clutch Pattern

8-7/8 DF009032

-

-

-

1"-23 # Clutch Pattern

8-7/8 DF009032

1"-23 -

-

1"-23 # Clutch Pattern

N1714 52008 N1738 52008 N1754 52008 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

79

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Dual Friction DF Disc DF PP & Disc

Counterbalance T.O.B. Align Tool Pilot Bearing

FORD LIGHT TRUCK, SUV & VAN RANGER - Continued 4 CYLINDER

1993. - 1994.10 Pressure Plate : Disc : PP & Disc :

2.3L 140" ENG. CF360014 381113 -

1994.11 - 1997. Pressure Plate : Disc : PP & Disc :

2.3L 140" ENG. CF361975 * 381963 -

1998. - 2004. Pressure Plate : Disc : PP & Disc :

2.5L 150" ENG. CF361996 * 381995 -

2001. - 2008. Pressure Plate : Disc : PP & Disc :

2.3L 140" CF361996 * 381995 -

8-7/8 -

DF113014

-

-

# Clutch Pattern

8-7/8 -

DF963975

-

*

225

-

DF963975

-

*

-

DF963975

-

CFT360032 381009 -

DF009032

*

-

-

-

1"-23 # Clutch Pattern

8-7/8

-

1"-23 # Clutch Pattern

8-7/8

225

1"-23 -

1"-23 # Clutch Pattern

N1750 52008 N1750 52008 52008 52008 -

6 CYLINDER 1983. - 1984. Pressure Plate : Disc : PP & Disc :

2.8L 171" ENG. CF360032 381009 -

1985. - 1987. Pressure Plate : Disc : PP & Disc :

2.8L & 2.9L 173" ENG. CF360032 CFT360032 381009 381009 -

1988. - 1992. Pressure Plate : Disc : PP & Disc :

2.9L 173" ENG. CF360032 381009 -

1990. - 1992. Pressure Plate : Disc : PP & Disc :

4.0L 244" ENG. -

1991. - 1992. Pressure Plate : Disc : PP & Disc :

3.0L 186" ENG. CF360032 381009 -

1993. - 1994.10 Pressure Plate : Disc : PP & Disc :

3.0L 186" ENG. CF360032 381009 -

CFT360032 381009 -

DF009032

-

-

4.0L 244" ENG. -

CFT116116

DF116116

-

-

1993. - 1997. Pressure Plate : Disc : PP & Disc : 1994.11 - 2007. Pressure Plate : Disc : PP & Disc :

3.0L 186" ENG. CF361975 * 381975 -

1998. - 2000. Pressure Plate : Disc : PP & Disc :

4.0 244" ENG. -

2001. - 2009. Pressure Plate : Disc : PP & Disc :

4.0L 244" ENG. -

8-7/8

# Clutch Pattern

8-7/8 DF009032

-

-

DF009032

-

-

*

DF116116

-

*

-

DF009032

-

-

DF975975

-

*

-

DF993993

-

*

-

DF145117

-

*

1"-23 # Clutch Pattern

10-1/8" -

1"-23 # Clutch Pattern

10-5/16 CFT116116

1"-23 # Clutch Pattern

9-1/8 -

1"-23 # Clutch Pattern

10

*

1"-23 # Clutch Pattern

8-7/8

*

1"-23 # Clutch Pattern

8-7/8 CFT360032 381009 -

1"-23 # Clutch Pattern

10 CFT116116

1"-23 # Clutch Pattern

8-7/8 CFT360032 381009 -

1"-23 -

-

1"-23 # Clutch Pattern

N1714 52008 N1738 52008 N1754 52008 N1754 52008 N1754 52008 N1750 52008 N1750 52008 N1750 52008 52008 52008 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

80

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Dual Friction DF Disc DF PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Counterbalance T.O.B. Align Tool Pilot Bearing

GEO METRO 1989. - 2000.

1.0L & 1.3L METRO

NOTE: INCLUDES TURBO Pressure Plate : Disc : PP & Disc : CF005059

190 -

DF059005

-

-

DF523025

-

7-1/2 -

3/4"-18 # Clutch Pattern

N1745 -

PRIZM 1989 - 1991.04 Pressure Plate : Disc : PP & Disc :

1.6L PRIZM SOHC CF025523

200

1990 - 1991.04 Pressure Plate : Disc : PP & Disc :

1.6L PRIZM DOHC CF035542

1991.05 - 1992. Pressure Plate : Disc : PP & Disc :

1.6L PRIZM DOHC CF035542

1991.05 - 1992. Pressure Plate : Disc : PP & Disc :

1.6L PRIZM SOHC CF025523

1993. - 1997. Pressure Plate : Disc : PP & Disc :

1.6L PRIZM SOHC CF035542

1993. - 2002. Pressure Plate : Disc : PP & Disc :

1.8L PRIZM CF035542

-

DF542035

-

1.0L SPRINT TURBO CF005059

-

DF059005

-

7-7/8 -

212 -

DF542035

-

-

DF542035

-

-

DF523025

-

-

-

DF542035

-

-

15/16"-21 # Clutch Pattern

8-3/8 -

212

15/16"-21 # Clutch Pattern

7-7/8

212

15/16"-21 # Clutch Pattern

8-3/8

200 -

# Clutch Pattern

8-3/8

212

15/16"-21 -

15/16"-21 # Clutch Pattern

8-3/8 -

15/16"-21 # Clutch Pattern

840 840 840 840 -

SPRINT 1987. - 1988. Pressure Plate : Disc : PP & Disc :

190

7-1/2 -

3/4"-18 # Clutch Pattern

N1745 -

TRACKER 1989. - 1995.

1.6L TRACKER

215

NOTE: O.E. CLUTCH DISC MAY BE 7-7/8" DIA. Pressure Plate : Disc : PP & Disc : CF020517 1996. Pressure Plate : Disc : PP & Disc :

DF517020

-

1.6L TRACKER UP TO VIN #T6401812 CF021519 DF519021

8-1/2 -

215 -

7/8"-20 # Clutch Pattern

8-1/2 -

7/8"-20 # Clutch Pattern

580 50047 580 50047 -

GMC CABALLERO,SPRINT 6 CYLINDER 1971. - 1977.

4.1L 250" ENG.

10.4

NOTE: O.E. CLUTCH DISC MAY BE 10" Pressure Plate : CF361874 CFT361874 Disc : 383271 383271 PP & Disc : 1978. Pressure Plate : Disc : PP & Disc :

3.3L 200" ENG. CF361874 383271 -

DF383271 DF271874

-

-

# Clutch Pattern

10.4 CFT361874 383271 -

DF383271 DF271874

-

1-1/8"-10

-

1-1/8"-10 # Clutch Pattern

N1086 53010 N1086 53010 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

81

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Dual Friction DF Disc DF PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Counterbalance T.O.B. Align Tool Pilot Bearing

GMC CABALLERO,SPRINT - Continued 6 CYLINDER

1978. Pressure Plate : Disc : PP & Disc :

3.8L 231" ENG. CF361874 383271 -

1979. Pressure Plate : Disc : PP & Disc :

3.3L 200" ENG. CF361675 383271 -

1980. - 1981. Pressure Plate : Disc : PP & Disc :

3.8L 229" ENG. CF361675 383271 -

10.4 CFT361874 383271 CFT361675 383271 CFT361675 383271 -

DF383271 DF271874 DF383271 DF271675 DF383271 DF271675

-

-

1-1/8"-10 # Clutch Pattern

11361739 23383271 01271739

10.4 LM361675 LM383271 LM271675

11361739 23383271 01271739

10.4 LM361675 LM383271 LM271675

1-1/8"-10 # Clutch Pattern

1-1/8"-10 # Clutch Pattern

N1086 53010 N1716 53010 43001 N1716 53010 43001

8 CYLINDER 1971.

6.6L 400" ENG.

11

NOTE: 2 PC REAR MAIN. 24.4 IN/OZ BAL. Pressure Plate : CF165552 CFT165552 Disc : 383735 383735 PP & Disc : 1971. - 1973.

DF383735 DF735552

11165552 23383735 01735552

LM165552 LM383735 LM735552

5.0L 307" ENG. DF383271 DF271675

11361739 23383271 01271739

LM361675 LM383271 LM271675

NOTE: 2 PC REAR MAIN. 168 TOOTH. Pressure Plate : CF361675 CFT361675 Disc : 383271 383271 PP & Disc : -

DF383271 DF271675

11361739 23383271 01271739

LM361675 LM383271 LM271675

1971. - 1974.

7.5L 454" ENG. DF384148 DF148552

11165552 23384148 01148552

7.5L 454" ENG.

1971. - 1978.

-

#3 Clutch Pattern

10.4 11361739 23383271 01271739

LM361675 LM383271 LM271675

NOTE: 2 PC REAR MAIN. 168 TOOTH. Pressure Plate : CF361675 CFT361675 Disc : 383271 383271 PP & Disc : -

DF383271 DF271675

11361739 23383271 01271739

LM361675 LM383271 LM271675

11165552 23383735 01735552

11 LM165552 LM383735 LM735552

1975. - 1977. Pressure Plate : Disc : PP & Disc :

4.3L 260" ENG. CF361874 383271 -

1976. - 1978.

5.0L 305" ENG.

CFT165552 383735 -

DF383735 DF735552 DF383271 DF271874

-

DF383271 DF271874

-

N1716 53026 43001 33.0 IN/OZ

0 IN/OZ

#2 Clutch Pattern

-

33.0 IN/OZ

1-1/8"-10

700120 900120

10.4

NOTE: 2 PC REAR MAIN. 153 TOOTH. Pressure Plate : CF361874 CFT361874 Disc : 383271 383271 PP & Disc : -

N1716 53010 43001

#3 Clutch Pattern

#2 Clutch Pattern

-

N1716 53010 43001

N1716 53026 43001

700100 900100

10.4 CFT361874 383271 -

1-1/8"-26 700140 -

DF383271 DF271675

6.6L 402" ENG. CF165552 383735 -

1-1/8"-26 700140 900140

NOTE: 2 PC REAR MAIN. 153 TOOTH. Pressure Plate : CF361675 CFT361675 Disc : 383271 383271 PP & Disc : -

1972. Pressure Plate : Disc : PP & Disc :

0 IN/OZ

#2 Clutch Pattern

-

5.7L 350" ENG.

1-1/8"-10

700120 900120

12

NOTE: 12" HEAVY DUTY UPGRADE. 2 PC REAR MAIN. 33.0 IN/OZ BAL. Pressure Plate : Disc : DF382612 PP & Disc : DF612909

#3 Clutch Pattern

#2 Clutch Pattern

LM165552 LM384148 LM148552

24.4 IN/OZ N1716 53010 43001

700100 900100

11

NOTE: 2 PC REAR MAIN. 33.0 IN/OZ BAL. Pressure Plate : CF165552 CFT165552 Disc : 384148 384148 PP & Disc : 1971. - 1974.

700180 -

10.4

NOTE: 2 PC REAR MAIN. 153 TOOTH. Pressure Plate : CF361675 CFT361675 Disc : 383271 383271 PP & Disc : -

1-1/8"-10

1-1/8"-10 # Clutch Pattern

1-1/8"-10 -

N1716 53010 43001 N1716 53010 43001 N1716 53010 43001

# Clutch Pattern

N1086 53010 -

1-1/8"-10

0 IN/OZ

700100 900100 #2 Clutch Pattern

N1086 53010 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

82

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Dual Friction DF Disc DF PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Counterbalance T.O.B. Align Tool Pilot Bearing

GMC CABALLERO,SPRINT - Continued 8 CYLINDER

NEW! 1976. - 1978. 5.0L 305" ENG. NOTE: 2 PC REAR MAIN. 168 TOOTH. Pressure Plate : CF361874 CFT361874 Disc : 383271 383271 PP & Disc : 1979. - 1981.

10.4 DF383271 DF271874

-

-

5.0L 305" ENG.

1-1/8"-10 700120 900120

10.4

NOTE: 2 PC REAR MAIN. 153 TOOTH. Pressure Plate : CF361675 CFT361675 Disc : 383271 383271 PP & Disc : -

DF383271 DF271675

11361739 23383271 01271739

LM361675 LM383271 LM271675

NOTE: 2 PC REAR MAIN. 168 TOOTH. Pressure Plate : CF361675 CFT361675 Disc : 383271 383271 PP & Disc : -

DF383271 DF271675

11361739 23383271 01271739

LM361675 LM383271 LM271675

0 IN/OZ

#2 Clutch Pattern

N1086 53010 -

1-1/8"-10

0 IN/OZ

700100 900100 #2 Clutch Pattern

700120 900120 #2 Clutch Pattern

N1716 53010 43001 N1716 53010 43001

GMC LIGHT TRUCK, SUV & VAN C, G, K, P, R, V, 1500-3500 SERIES, FULL SIZE JIMMY, SUBURBAN, SIERRA, YUKON 4 CYLINDER 1963. - 1965. Pressure Plate : Disc : PP & Disc :

2.5L 153" ENG. CF361874 383271 -

10.4 CFT361874 383271 -

DF383271 DF271874

-

-

1963. - 1976. Pressure Plate : Disc : PP & Disc :

194", 230" & 250" ENG. w/10-1/2" CLUTCH CF361874 CFT361874 383271 383271 DF383271 DF271874

-

-

1963. - 1976. Pressure Plate : Disc : PP & Disc :

194", 230" & 250" ENG. w/11" CLUTCH CF165473 CFT165473 383735 383735 DF383735 DF735473

1969. - 1984. Pressure Plate : Disc : PP & Disc :

4.7L 292" ENG. CF165552 383735 -

1970. Pressure Plate : Disc : PP & Disc :

3.8L 230" ENG. CF361909 384024 -

1972. - 1978. Pressure Plate : Disc : PP & Disc :

4.1L 250" ENG. CF165552 383735 -

1979. - 1984. Pressure Plate : Disc : PP & Disc :

4.1L 250" ENG. 3 SPD. CF165552 CFT165552 383735 383735 -

1981. - 1984. Pressure Plate : Disc : PP & Disc :

4.1L 250" ENG. 4 SPD. CF361909 CFT361909 384024 384024 -

1985. - 1989. Pressure Plate : Disc : PP & Disc :

4.8L 292" ENG. CF361877 383735 -

1-1/8"-10 # Clutch Pattern

N1086 53010 -

6 CYLINDER

CFT165552 383735 -

DF383735 DF735552

10.4

# Clutch Pattern

11 11165552 23383735 01735552

-

CFT165552 383735 -

DF384024 DF024909 DF383735 DF735552 DF383735 DF735552

-

-

11165552 23383735 01735552 11165552 23383735 01735552

11 LM165552 LM383735 LM735552 12

-

-

DF383735 DF735877

-

# Clutch Pattern

1-1/8"-10 1-1/8"-10 # Clutch Pattern

1-1/8"-10 # Clutch Pattern

1-1/8"-10 # Clutch Pattern

11 CFT361877 383735 -

1-1/8"-10 -

# Clutch Pattern

11 LM165552 LM383735 LM735552

DF384024 DF024909

1-1/8"-10 # Clutch Pattern

11 LM165552 LM383735 LM735552 12

CFT361909 384024 -

1-1/8"-10 -

-

1-1/8"-10 # Clutch Pattern

N1086 53010 N1086 53010 N1716 53010 43001 N1716 53010 43001 N1716 53010 43001 N1716 53010 43001 N1716 53010 43001 N1716 53010 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

83

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Dual Friction DF Disc DF PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Counterbalance T.O.B. Align Tool Pilot Bearing

GMC LIGHT TRUCK, SUV & VAN C, G, K, P, R, V, 1500-3500 SERIES, FULL SIZE JIMMY, SUBURBAN, SIERRA, YUKON - Continued 6 CYLINDER 1985. - 1995.

4.3L 262" ENG.

11

NOTE: 1PC REAR MAIN, 23.4IN/OZ BAL. Pressure Plate : CF361877 CFT361877 Disc : 383735 383735 PP & Disc : 1996. - 1998.

DF383735 DF735877

-

-

4.3L 262" ENG.

700160 #3 Clutch Pattern

11

NOTE: 1PC REAR MAIN, 23.4IN/OZ BAL. Pressure Plate : CF360450 CFT360450 Disc : 384188 384188 PP & Disc : -

DF383735 DF188450

-

1-1/8"-10

-

1-1/8"-10 700160 -

23.4 IN/OZ N1716 53010 23.4 IN/OZ

#3 Clutch Pattern

N1777 53010 -

1-1/8"-10

0 IN/OZ

8 CYLINDER 1962. - 1968.

4.6L 283" ENG. H.D.

NOTE: 2 PC REAR MAIN. 168 TOOTH. Pressure Plate : CF361909 CFT361909 Disc : 384024 384024 PP & Disc : 1967. - 1979.

11165552 23383735 01735552

LM165552 LM383735 LM735552

DF384024 DF024909

-

DF383735 DF735473

-

DF383735 DF735552

11165552 23383735 01735552

-

-

-

-

-

DF383735 DF735552

DF384148 DF148552

11165552 23384148 01148552

1-1/8"-10

0 IN/OZ

#3 Clutch Pattern

N1086 53010 -

1-1/8"-10

0 IN/OZ

#3 Clutch Pattern

N1716 53010 43001

1-1/8"-10

0 IN/OZ

1-1/8"-10

33.0 IN/OZ

#3 Clutch Pattern

1-1/8"-10

0 IN/OZ

#3 Clutch Pattern

LM165552 LM384148 LM148552

N1716 53010 43001

N1716 53010 43001

700120 900120

11

NOTE: 2 PC REAR MAIN. 24.4 IN/OZ BAL. Pressure Plate : CF165552 CFT165552 Disc : 384148 384148 PP & Disc : -

#3 Clutch Pattern

N1716 53010 43001

700140 -

LM165552 LM383735 LM735552

6.6L 400" ENG.

0 IN/OZ

#3 Clutch Pattern

11 11165552 23383735 01735552

1-1/8"-10

700120 900561

-

5.0L 305" ENG. 4 SPD O.D w/11" CLUTCH

#3 Clutch Pattern

N1716 53010 43001

700120 900120

12 DF384024 DF024909

0 IN/OZ

700120 900120

LM165552 LM383735 LM735552

7.4L 454" ENG.

1-1/8"-10

700120 900561

12 DF384024 DF024909

#3 Clutch Pattern

N1716 53010 43001

700120 900120

12

6.5L 396" & 6.6L 402" ENG.

NOTE: 2 PC REAR MAIN. 168 TOOTH. Pressure Plate : CF165552 CFT165552 Disc : 383735 383735 PP & Disc : 1978.

DF383735 DF735552

11

NOTE: 2 PC REAR MAIN. 33.0 IN/OZ BAL. Pressure Plate : CF361909 CFT361909 Disc : 384024 384024 PP & Disc : 1975. - 1984.

11

5.0L 307" ENG.

NOTE: 2 PC REAR MAIN. 168 TOOTH. Pressure Plate : CF361909 CFT361909 Disc : 384024 384024 PP & Disc : 1970. - 1990.

700120 900561

11

NOTE: 2 PC REAR MAIN. 168 TOOTH. Pressure Plate : CF165552 CFT165552 Disc : 383735 383735 PP & Disc : 1969. - 1973.

-

4.6L 283" ENG.

NOTE: 2 PC REAR MAIN. 168 TOOTH. Pressure Plate : CF165473 CFT165473 Disc : 383735 383735 PP & Disc : 1969. - 1973.

-

5.7L 350" ENG. w/12" CLUTCH (HD OPTION)

NOTE: 2 PC REAR MAIN. 168 TOOTH. Pressure Plate : CF361909 CFT361909 Disc : 384024 384024 PP & Disc : 1968.

DF384024 DF024909

5.7L 350" ENG. w/11" CLUTCH

NOTE: 2 PC REAR MAIN. 168 TOOTH. Pressure Plate : CF165552 CFT165552 Disc : 383735 383735 PP & Disc : 1967. - 1979.

12

1-1/8"-26 700180 #3 Clutch Pattern

N1716 53010 43001 24.4 IN/OZ N1716 53026 43001

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

84

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Dual Friction DF Disc DF PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Counterbalance T.O.B. Align Tool Pilot Bearing

GMC LIGHT TRUCK, SUV & VAN C, G, K, P, R, V, 1500-3500 SERIES, FULL SIZE JIMMY, SUBURBAN, SIERRA, YUKON - Continued 8 CYLINDER 1978.

6.6L 400" ENG.

12

NOTE: 2 PC REAR MAIN. 24.4 IN/OZ BAL. 12" HEAVY DUTY UPGRADE Pressure Plate : Disc : DF382612 PP & Disc : DF612909 1979. - 1984.

NEW! 1980. - 1985. 5.7L 350" ENG. NOTE: 2 PC REAR MAIN. 168 TOOTH. Pressure Plate : CF361909 CFT361909 Disc : 384024 384024 PP & Disc : -

1985.

6.2L 381" DIESEL ENG. CF361909 CFT361909 384195 384195 -

DF384024 DF024909

-

DF384024 DF024909

-

DF195909

-

DF383735 DF735877

-

-

-

-

-

DF070310

-

NOTE: 1 PC REAR MAIN. 23.4 IN/OZ BAL Pressure Plate : CF360310 CFT360310 Disc : 381097 381097 PP & Disc : -

-

NOTE: 1 PC REAR MAIN. 23.4 IN/OZ BAL Pressure Plate : CF360310 CFT360310 Disc : 381028 381028 PP & Disc : -

-

1-1/8"-10

1-1/8"-10

1-1/8"-10

1-1/8"-10 700161 #3 Clutch Pattern

-

1-1/8"-10 700161 #3 Clutch Pattern

-

N1716 53010 23.4 IN/OZ N1716 53010 23.4 IN/OZ N1716 53010 43001 42.5 IN/OZ N1716 53010 43001

1-1/8"-10

# Clutch Pattern

12 DF028310

0 IN/OZ

-

-

5.7L 350" ENG. NVG 4500 TRANS

1-1/8"-10

#3 Clutch Pattern

12 DF097310

# Clutch Pattern

700145 -

-

N1716 53010 43001 N1716 53010 -

#3 Clutch Pattern

-

5.7L 350" ENG. NVG 3500 TRANS

1-1/8"-10 -

700160 -

12

NOTE: 1 PC REAR MAIN. 23.4 IN/OZ BAL Pressure Plate : CF360310 CFT360310 Disc : 381070 381070 PP & Disc : -

0 IN/OZ

#3 Clutch Pattern

-

5.0L 305" ENG.

1-1/8"-10

700160 -

12 -

#3 Clutch Pattern

N1716 53010 43001

#3 Clutch Pattern

-

6.5L 396" DIESEL & TURBO DIESEL

0 IN/OZ

700120 900120

12

NOTE: w/SOLID FLYW. OPTION, REF. GM BULLETIN #66-72-02-B Pressure Plate : Disc : PP & Disc : DF987983

1996. - 2000.

-

12 DF384024 DF024909

1-1/8"-10

#3 Clutch Pattern

11 DF383735 DF735877

#3 Clutch Pattern

700120 900561 12

NEW! 1991. - 1995. 7.4L 454" ENG. NOTE: 1 PC REAR MAIN w/CAST CRANK. LG FLANGE. 42.5 IN/OZ BAL. Pressure Plate : CF361909 CFT361909 Disc : 384024 384024 DF384024 PP & Disc : DF024909

1996. - 2000.

-

24.4 IN/OZ N1716 53026 43001

700120 900561 12

5.7L 350" ENG.

NOTE: 1 PC REAR MAIN. 23.4 IN/OZ BAL Pressure Plate : CF361909 CFT361909 Disc : 384024 384024 PP & Disc : -

1996. - 1998.

-

11

NEW! 1986. - 1995. 5.0L 305" ENG. NOTE: 1 PC REAR MAIN. 23.4 IN/OZ BAL Pressure Plate : CF361877 CFT361877 Disc : 383735 383735 PP & Disc : -

1992. - 1995.

700180 12

5.0L 305" ENG.

NOTE: 2 PC REAR MAIN. 168 TOOTH. Pressure Plate : CF361877 CFT361877 Disc : 383735 383735 PP & Disc : -

1986. - 1995.

-

5.0L 302" & 305" ENG. 4 SPD O.D w/12" CLUTCH

NOTE: 2 PC REAR MAIN. 168 TOOTH. Pressure Plate : CF361909 CFT361909 Disc : 384024 384024 PP & Disc : -

1982. - 1993. Pressure Plate : Disc : PP & Disc :

-

1-1/8"-26

1-1/8"-10 700161 #3 Clutch Pattern

N1716 53010 23.4 IN/OZ N1777 53010 23.4 IN/OZ N1777 53010 23.4 IN/OZ N1777 53010 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

85

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Dual Friction DF Disc DF PP & Disc

Counterbalance T.O.B. Align Tool Pilot Bearing

GMC LIGHT TRUCK, SUV & VAN C, G, K, P, R, V, 1500-3500 SERIES, FULL SIZE JIMMY, SUBURBAN, SIERRA, YUKON - Continued 8 CYLINDER

1996. - 2000. Pressure Plate : Disc : PP & Disc : 1996. - 2000.

6.5L 396" DIESEL ENG. (P-SERIES ONLY) CF360310 CFT360310 381070 381070 DF070310

12 -

12 -

1996. - 2002.

-

2001 - 2007

#3 Clutch Pattern

-

# Clutch Pattern

12

4.8L 292" ENG. -

-

-

DF084025

-

# Clutch Pattern

*

-

NOTE: INCLUDES STEEL BILLET FLYWHEEL Pressure Plate : Disc : PP & Disc : -

12 DF997997

-

-

NOTE: ASSEMBLY REQUIRES CENTERFORCE FLYWHEEL. Pressure Plate : Disc : PP & Disc : DF240010

-

-

-

-

1-1/8"-10 # Clutch Pattern

6.0L ENG. OE DISC MAYBE 11 7/8"

42.5 IN/OZ N1777 53010 -

N1777 53010 -

1-1/8"-10 -

11-7/8

N1777 53010 -

1-1/8"-10 -

6.5L 396" TURBO DIESEL ENG. w/DMF -

1-1/8"-10 700146 -

12

NOTE: (.217" FLYWHEEL STEP) EXC. P-SERIES, SOLID DISC HUB. Pressure Plate : Disc : PP & Disc : DF875740 * 1999 - 2006 Pressure Plate : Disc : PP & Disc :

-

6.5L 396" TURBO DIESEL ENG w/o DMF

NOTE: SOLID FLYWHEEL ONLY, SPRUNG DISC HUB. Pressure Plate : CF360055 CFT360055 Disc : 381075 381075 PP & Disc : DF075055

1-1/8"-10 # Clutch Pattern

7.4L 454" ENG.

NOTE: 1 PC REAR MAIN w/CAST CRANK. LG FLANGE. 42.5 IN/OZ BAL. Pressure Plate : CF360055 CFT360055 Disc : 381075 381075 PP & Disc : DF075055 1996. - 2002.

-

1-1/8"-10 INCLUDED # Clutch Pattern

700142 900142 #14 Clutch Pattern

N1777 53010 53010 43003 0 IN/OZ 53010 43003 53010 43003

S-15/T-15, JIMMY, SONOMA 4 CYLINDER 1983. - 1984. Pressure Plate : Disc : PP & Disc :

2.0L 122" ENG. CF361904 384201 -

1985. - 1993. Pressure Plate : Disc : PP & Disc :

2.5L 151" ENG. CF361904 384201 -

1994. - 1995. Pressure Plate : Disc : PP & Disc :

2.2L 135" ENG. -

1996. - 2003. Pressure Plate : Disc : PP & Disc :

2.2L 135" ENG. -

9-1/8 CFT361904 384201 -

DF201904

# Clutch Pattern

9-1/8 CFT361904 384201 -

DF201904

-

-

*

DF120170

-

*

-

*

DF120170

-

*

1-1/8"-26 # Clutch Pattern

9-1/8 CFT361170 384120 -

1"-14 # Clutch Pattern

9-1/8 CFT361170 384120 -

1"-14 -

-

1-1/8"-26 # Clutch Pattern

N1716 53006 N1716 53006 N1716 53026 N1777 53026 -

6 CYLINDER 1982. - 1984.

2.8L 171" ENG.

9-1/8

NOTE: O.E. CLUTCH DISC MAY BE 9-11/16" Pressure Plate : CF361900 Disc : 384201 PP & Disc : -

DF201900

-

-

1"-14 # Clutch Pattern

N1716 53006 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

86

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Dual Friction DF Disc DF PP & Disc

Counterbalance T.O.B. Align Tool Pilot Bearing

GMC LIGHT TRUCK, SUV & VAN S-15/T-15, JIMMY, SONOMA - Continued 6 CYLINDER

1985. - 1993. Pressure Plate : Disc : PP & Disc :

2.8L 171" ENG. CF361904 384201 -

1990. - 1995.

4.3L 262" ENG.

9-1/8 CFT361904 384201 -

-

DF383735 DF735877

-

-

-

#3 Clutch Pattern

-

#3 Clutch Pattern

11 DF383735 DF188450

-

-

DF201902

-

-

1-1/8"-10 700160 -

4.3L 262" ENG.

NOTE: 1PC REAR MAIN, 23.4IN/OZ BAL. Pressure Plate : CF360450 CFT360450 Disc : 384188 384188 PP & Disc : -

1-1/8"-10 700160 -

11 DF383735 DF735552

1"-14 # Clutch Pattern

4.3L 262" HIGH OUTPUT ENG.

NOTE: 1PC REAR MAIN, 23.4IN/OZ BAL. Pressure Plate : CF165552 CFT165552 Disc : 383735 383735 PP & Disc : 1996. - 2004.

-

11

NOTE: 1PC REAR MAIN, 23.4IN/OZ BAL. Pressure Plate : CF361877 CFT361877 Disc : 383735 383735 PP & Disc : 1994. - 1995.

DF201904

1-1/8"-10 700160 #3 Clutch Pattern

N1716 53006 23.4 IN/OZ N1716 53010 23.4 IN/OZ N1716 53010 43001 23.4 IN/OZ N1777 53010 -

SAFARI VAN 4 CYLINDER 1985. - 1989. Pressure Plate : Disc : PP & Disc :

2.5L 151" ENG. CF361902 384201 -

9-1/8 CFT361902 384201 -

1"-14 # Clutch Pattern

N1716 53006 -

6 CYLINDER 1986. - 1989.

4.3L 262" ENG.

11

NOTE: 1PC REAR MAIN, 23.4IN/OZ BAL. Pressure Plate : CF361877 CFT361877 Disc : 384212 384212 PP & Disc : -

-

-

-

-

-

1"-14 700160 #3 Clutch Pattern

23.4 IN/OZ N1716 53006 -

HONDA ACCORD 1979. - 1981. Pressure Plate : Disc : PP & Disc :

1.8L ACCORD 5 SPD EK ENG. CF340503 *

200

1982. Pressure Plate : Disc : PP & Disc :

1.8L ACCORD 5 SPD EK ENG. CF340503 *

1983. - 1985. Pressure Plate : Disc : PP & Disc :

1.8L ACCORD 5 SPD EK, ES2, ES3 ENG. CF340508 DF508340 *

1986. - 1989. Pressure Plate : Disc : PP & Disc :

2.0L ACCORD DX,LX 5 SPD BT, A2, A3 ENG CF005518 DF518005 *

1990. - 1997. Pressure Plate : Disc : PP & Disc :

2.2L ACCORD 5 SPD 2-4 DR A4 ENG. CF806908 DF908806 *

1998. - 2003. Pressure Plate : Disc : PP & Disc :

2.3L ACCORD 2 & 4 DR. A4 ENG. CF806908 *

7-7/8 -

200 -

-

-

-

*

-

-

*

11908806 23908806 01908806

-

* *

DF908806

*

11908806 23908806 01908806

* *

7/8"-21 # Clutch Pattern

8-7/8 -

225

7/8"-21 # Clutch Pattern

8-3/8

225

7/8"-21 # Clutch Pattern

7-7/8

212

*

# Clutch Pattern

7-7/8

200

7/8"-21 -

1-1/32"-24 700908 #20 Clutch Pattern

8-7/8 -

1-1/32"-24 700908 #20 Clutch Pattern

50052 370 50052 370 50052 370 50052 0 IN/OZ 817 50058 0 IN/OZ 817 50058 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

87

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Dual Friction DF Disc DF PP & Disc

Counterbalance T.O.B. Align Tool Pilot Bearing

HONDA CIVIC

1973. - 1979. Pressure Plate : Disc : PP & Disc :

1.2L CIVIC 4 SPD EB ENG. CF210501 -

190

1975. - 1979. Pressure Plate : Disc : PP & Disc :

1.5L CIVIC 4 & 5 SPD CF210501

ED ENG. -

1984. - 1987. Pressure Plate : Disc : PP & Disc :

1.3L CIVIC 4 & 5 SPD CF210506 *

EVI ENG. -

1984. - 1987. Pressure Plate : Disc : PP & Disc :

1.5L CIVIC 4 & 5 SPD CF210506 *

EW ENG. -

1988. Pressure Plate : Disc : PP & Disc :

1.5L CIVIC 4 & 5 SPD CF006507 *

D15 ENG. -

1989. Pressure Plate : Disc : PP & Disc :

1.5L D15 & 1.6L D16 ENG. CIVIC 4 & 5 SPD CF222507 DF507222 *

DF501210 DF501210 DF506210 DF506210

-

*

DF507006

1992. - 2000. Pressure Plate : Disc : PP & Disc :

1.6L CIVIC 4 & 5 SPD. SOHC D16 ENG. CFT902802 * DF902802

1999. - 2001. Pressure Plate : Disc : PP & Disc :

1.6L CIVIC SI V-TECH DOHC B16A ENG. CFT900800 * DF900800

*

*

11507222 23507006 01507006

*

*

11507222 23507222 01507222

*

-

*

*

11208209 23902802 01902802

*

-

*

DF902802

*

11208209 23902802 01902802

*

-

*

*

11208209 23902802 01902802

*

-

*

*

11900800 23008009 01900800

* *

*

DF918802

*

11208209 23902802 01902802

2.0L ENG. CIVIC & CIVIC SI -

*

-

*

DF538822

-

*

-

-

DF391200

-

*

1-1/32"-24 #13 Clutch Pattern

8-3/8 -

7/8"-20 # Clutch Pattern

8-7/16 -

215

7/8"-20 700905 #15 Clutch Pattern

8-5/8

215

7/8"-20 700905 #15 Clutch Pattern

8-3/8

220

7/8"-20 700905 #15 Clutch Pattern

8-3/8

212

7/8"-20 # Clutch Pattern

8-3/8

212

7/8"-21 # Clutch Pattern

7-7/8

212

13/16"-19 # Clutch Pattern

7-1/2

212

NOTE: ALL EXCEPT SI SERIES Pressure Plate : Disc : PP & Disc : CFT918802

*

-

*

13/16"-19 # Clutch Pattern

7-1/2

200

1.7L CIVIC D17 ENG.

2.0L CIVIC SI 6 SPD. -

-

-

13/16"-19 # Clutch Pattern

7-1/2

190

1.5L CIVIC 4 & 5 SPD D15 ENG. CFT902802 *

NOTE: 5 SPD. Pressure Plate : Disc : PP & Disc : CF822538

-

190

1992. - 1995. Pressure Plate : Disc : PP & Disc :

2006 - 2007. Pressure Plate : Disc : PP & Disc :

-

13/16"-19 # Clutch Pattern

7-1/2

190

1.5L D15 & 1.6L D16 ENG. CIVIC 4 & 5 SPD CFT902802 * DF902802

2002. - 2005.

7-1/2 -

190

1990. - 1991. Pressure Plate : Disc : PP & Disc :

2001. - 2005.

-

1-1/32"-24 # Clutch Pattern

8-1/2" -

1-1/32"-24 # Clutch Pattern

50027 50027 352 50027 352 50027 427 50052 427 50059 0 IN/OZ 427 50059 0 IN/OZ 820 50059 0 IN/OZ 820 50059 817 50088 820 50059 INCLUDED INCLUDED INCLUDED INCLUDED INCLUDED INCLUDED

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

88

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Dual Friction DF Disc DF PP & Disc

Counterbalance T.O.B. Align Tool Pilot Bearing

HONDA CIVIC WAGON

1975. - 1979. Pressure Plate : Disc : PP & Disc :

1.5L WAGON 4 SPD ED ENG. CF210501 -

190

1984. - 1987. Pressure Plate : Disc : PP & Disc :

1.5L WAGON 5 SPD 2WD EW1, A2 ENG. CF210506 DF506210 *

1984. - 1987. Pressure Plate : Disc : PP & Disc :

1.5L WAGON 5 SPD 4WD EW1, A2 ENG. CF210506 DF506210 *

1988. Pressure Plate : Disc : PP & Disc :

1.5L WAGON 5 SPD 2WD D15 ENG. CF006507 *

1988. Pressure Plate : Disc : PP & Disc :

1.6L WAGON 5 SPD 4WD D16 ENG. CF006507 *

1989. Pressure Plate : Disc : PP & Disc :

1.5L WAGON 5 SPD 2WD D15 ENG. CF222507 *

1989. Pressure Plate : Disc : PP & Disc :

1.6L WAGON 5 SPD 4WD D16 ENG. CF222507 *

DF501210

-

7-1/2 -

190 -

*

-

-

*

*

11507222 23507006 01507006

-

* *

DF507006

*

11507222 23507006 01507006

*

-

*

DF507222

*

11507222 23507222 01507222

*

-

*

DF507222

1990. - 1991. Pressure Plate : Disc : PP & Disc :

1.5L WAGON 5 SPD 2WD D15 ENG. CFT902802 *

1990. - 1991. Pressure Plate : Disc : PP & Disc :

1.6L WAGON 5 SPD 4WD D16 ENG. CFT902802 *

1992. - 1999. Pressure Plate : Disc : PP & Disc :

1.5L WAGON 5 SPD 2WD D15 ENG. CFT902802 *

1992. - 1999. Pressure Plate : Disc : PP & Disc :

1.6L WAGON 5 SPD 4WD D16 ENG. CFT902802 *

DF902802

2.0L CR-V -

DF900800

*

11507222 23507222 01507222

*

-

*

DF902802

*

11208209 23902802 01902802

*

-

*

DF902802

*

11208209 23902802 01902802

*

-

*

DF902802

*

11208209 23902802 01902802

*

-

*

*

11208209 23902802 01902802

*

11900800 23008009 01900800

*

-

* *

7/8"-20 700905 #15 Clutch Pattern

8-3/8 -

212

7/8"-20 700905 #15 Clutch Pattern

8-3/8

212

7/8"-20 # Clutch Pattern

8-3/8

212

7/8"-20 # Clutch Pattern

7-7/8

212

7/8"-21 # Clutch Pattern

7-7/8

200

7/8"-21 # Clutch Pattern

7-1/2

200

13/16"-19 # Clutch Pattern

7-1/2

190

13/16"-19 # Clutch Pattern

7-1/2

190 DF507006

# Clutch Pattern

7-1/2

190

13/16"-19 -

7/8"-20 700905 #15 Clutch Pattern

8-3/8 -

7/8"-20 700905 #15 Clutch Pattern

50027 352 50027 428 50027 427 50052 428 50052 427 50059 428 50059 0 IN/OZ 427 50059 0 IN/OZ 428 50059 0 IN/OZ 820 50059 0 IN/OZ 820 50059 -

CR-V 1998. - 2001. Pressure Plate : Disc : PP & Disc :

220 CFT900800

*

* *

8-5/8 -

1-1/32"-24 700900 800900 #13 Clutch Pattern

0 IN/OZ 817 50088 -

CRX 1984. Pressure Plate : Disc : PP & Disc :

1.3L CRX 5 SPD EVI ENG. CF210506 *

190

1984. - 1987. Pressure Plate : Disc : PP & Disc :

1.5L CRX 5 SPD & SI EV1/4, A2, A3 ENG. CF210506 DF506210 *

DF506210

7-1/2 -

190 -

*

13/16"-19 # Clutch Pattern

7-1/2 -

13/16"-19 # Clutch Pattern

352 50027 352 50027 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

89

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Dual Friction DF Disc DF PP & Disc

Counterbalance T.O.B. Align Tool Pilot Bearing

HONDA CRX - Continued

1988. Pressure Plate : Disc : PP & Disc :

1.5L D15 & 1.6L D16 CRX CARB. ONLY CF006507 DF507006 *

1988. Pressure Plate : Disc : PP & Disc :

1.6L D16 ENG. CRX w/FUEL INJECTION CF006507 DF507006 *

1989. Pressure Plate : Disc : PP & Disc :

1.5L D15 & 1.6L D16 ENG. CRX CF222507 *

1990. - 1991. Pressure Plate : Disc : PP & Disc :

190

*

11507222 23507006 01507006

* *

7-1/2 -

200

*

11507222 23507006 01507006

* *

DF507222

1.5L D15 & 1.6L D16 ENG. CRX CFT902802 *

DF902802

1993. - 1995. Pressure Plate : Disc : PP & Disc :

1.5L DEL SOL -

DF902802

1993. - 1995. Pressure Plate : Disc : PP & Disc :

1.6L DEL SOL NON-VTEC SOHC CFT902802 *

1994. - 1997. Pressure Plate : Disc : PP & Disc :

1.6L DEL SOL VTEC ENG. DOHC CFT900800 *

*

11507222 23507222 01507222

* *

-

*

*

11208209 23902802 01902802

* *

7/8"-21 # Clutch Pattern

7-7/8 -

212 11208209 23902802 01902802

# Clutch Pattern

7-7/8

200

7/8"-21 -

7/8"-20 # Clutch Pattern

8-3/8 -

7/8"-20 700905 #15 Clutch Pattern

370 50052 427 50052 427 50059 0 IN/OZ 427 50059 -

DEL SOL

1996. - 1997. Pressure Plate : Disc : PP & Disc :

212 CFT902802

1.6L NON-VTEC SOHC CF222530 *

*

* *

8-3/8 -

212 DF902802

*

11208209 23902802 01902802

* *

DF900800

*

11900800 23008009 01900800

* *

-

-

*

7/8"-20 700905 #15 Clutch Pattern

8-5/8 -

200 DF530222

#15 Clutch Pattern

8-3/8

220

7/8"-20 700905 -

1-1/32"-24 700900 800900 #13 Clutch Pattern

8-1/4 -

7/8"-20 # Clutch Pattern

0 IN/OZ 820 50059 0 IN/OZ 820 50059 0 IN/OZ 817 50088 820 50059 -

PASSPORT 1994. - 1998. Pressure Plate : Disc : PP & Disc :

2.6L PASSPORT 4ZE1 ENG. CF023547 -

240 DF547023

-

-

-

9-1/2 -

1"-24 # Clutch Pattern

812 50058 -

PRELUDE 1979. - 1982. Pressure Plate : Disc : PP & Disc :

1.8L PRELUDE 5 SPD CF340503 -

1983. - 1987. Pressure Plate : Disc : PP & Disc :

1.8L PRELUDE 5 SPD CF340508 *

1984. - 1987. Pressure Plate : Disc : PP & Disc :

2.0L PRELUDE 5 SPD & SI CF005518 *

1988. - 1989. Pressure Plate : Disc : PP & Disc :

2.0L PRELUDE -

200

7-7/8 -

200 DF508340

-

*

DF518005

-

-

*

DF904004

-

*

7/8"-21 # Clutch Pattern

8-3/8 -

210 -

# Clutch Pattern

7-7/8

212

7/8"-21 -

7/8"-21 # Clutch Pattern

8-1/4 -

1"-24 # Clutch Pattern

50052 370 50052 370 50052 817 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

90

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Dual Friction DF Disc DF PP & Disc

Counterbalance T.O.B. Align Tool Pilot Bearing

HONDA PRELUDE - Continued

1990. - 1991. Pressure Plate : Disc : PP & Disc :

2.0L & 2.1L PRELUDE CFT913813

220

1992. - 1996. Pressure Plate : Disc : PP & Disc :

2.2L PRELUDE S, SOHC CFT915015

1992. - 2002. Pressure Plate : Disc : PP & Disc :

2.2L & 2.3L PRELUDE DOHC & VTEC CFT915015 * DF915015

*

DF913813

-

*

8-5/8 -

220

*

DF915015

-

*

-

-

*

# Clutch Pattern

8-5/8

220

1"-24 1-1/32"-24 700908 #20 Clutch Pattern

8-5/8 -

1-1/32"-24 700908 -

817 50058 0 IN/OZ 817 50058 -

#20 Clutch Pattern

0 IN/OZ 817 50058 -

1-1/32"-24

0 IN/OZ

S-2000 2000. - 2007.

2.0L & 2.2l S-2000 VTEC 6 SPD.

NOTE: PULL-TYPE CLUTCH Pressure Plate : Disc : PP & Disc : -

212

-

DF911808

CFT518006

DF518006

*

11911808 23911808 01911808

* *

8-3/8 -

700901 # Clutch Pattern

50058 -

HYUNDAI ELANTRA 1992. - 1993.09 Pressure Plate : Disc : PP & Disc :

1.6L ELANTRA CF006518

1993. - 1995. Pressure Plate : Disc : PP & Disc :

1.8L ELANTRA CF012516 *

1993.10 - 1995. Pressure Plate : Disc : PP & Disc :

1.6L ELANTRA CF012516 *

1996. - 1998.

200 215 -

DF516012

-

*

-

DF516012

1999. - 2006.

*

CFT178157

*

DF178157

*

11178157 23178157 01178157

-

* *

CFT178157

*

DF178157

*

11178157 23178157 01178157

* *

7/8"-20 # Clutch Pattern

8-1/2 -

215

7/8"-20 # Clutch Pattern

8-19/32

215

2.0L ELANTRA

NOTE: PULL-TYPE CLUTCH Pressure Plate : Disc : PP & Disc : -

-

-

7/8"-20 # Clutch Pattern

8-19/32

215

1.8L ELANTRA

NOTE: PULL-TYPE CLUTCH Pressure Plate : Disc : PP & Disc : -

7-7/8 -

# Clutch Pattern

-

210 50020 210 50020 -

7/8"-20 -

8-1/2

210 50020 -

134 50020 -

7/8"-20 # Clutch Pattern

134 50020 -

EXCEL 1989.07 - 1994. Pressure Plate : Disc : PP & Disc :

1.5L EXCEL INJ. CF006518 CFT518006

200 DF518006

-

7-7/8 -

7/8"-20 # Clutch Pattern

210 50020 -

SANTA FE 2001. - 2004.

2.4L SANTA FE

225

NOTE: PULL-TYPE CLUTCH, FOR USE ON DMF ONLY, SOLID DISC HUB. Pressure Plate : 11292271 Disc : 23292271 PP & Disc : DF292271 01292271 *

* *

8-7/8 -

7/8"-20 # Clutch Pattern

134 50020 -

SCOUPE 1991. - 1995. Pressure Plate : Disc : PP & Disc :

1.5L SCOUPE NON-TURBO CF006518 CFT518006

200 DF518006

-

7-7/8 -

7/8"-20 # Clutch Pattern

210 50020 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

91

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Dual Friction DF Disc DF PP & Disc

Counterbalance T.O.B. Align Tool Pilot Bearing

HYUNDAI SCOUPE - Continued

1993. - 1995. Pressure Plate : Disc : PP & Disc :

1.5L SCOUPE TURBO CF012516 *

DF516012

215

2.0L SONATA DOHC CF012516 *

DF516012

*

-

*

-

8-19/32 -

7/8"-20 # Clutch Pattern

210 50020 -

SONATA 1992. - 1994.10 Pressure Plate : Disc : PP & Disc : 2002. - 2005.

215

2.4L SONATA,

225

NOTE: PULL-TYPE CLUTCH, FOR USE ON DMF ONLY, SOLID DISC HUB. Pressure Plate : 11292271 Disc : 23292271 PP & Disc : DF292271 01292271 * 2002. - 2005.

8-19/32 -

2.7L SONATA 6 CYL.

* *

NOTE: PULL-TYPE CLUTCH, FOR USE ON DMF ONLY, SOLID DISC HUB. Pressure Plate : 11292271 Disc : 23292271 PP & Disc : DF292271 01292271 *

* *

# Clutch Pattern

8-7/8 -

225

7/8"-20 7/8"-20 # Clutch Pattern

8-7/8 -

210 50020 -

134 50020 -

7/8"-20 # Clutch Pattern

134 50020 -

TIBURON 1997. - 1998.

1.8L TIBURON

NOTE: PULL-TYPE CLUTCH Pressure Plate : Disc : PP & Disc : 1997. - 2001.

*

DF178157

*

11178157 23178157 01178157

CFT178157

*

DF178157

*

11178157 23178157 01178157

CFT178157

DF178157

*

11178157 23178157 01178157

2.7L V6 ENG. 5 SPD FROM 4/03 & 6 SPD FROM 2/03

CFT178157

* *

* *

* *

*

DF178157

*

11178157 23178157 01178157

*

11914812 23914812 01914812

* *

# Clutch Pattern

-

# Clutch Pattern

-

# Clutch Pattern

-

# Clutch Pattern

-

134 50020 -

7/8"-20 -

8-1/2

134 50020 -

7/8"-20 -

8-7/8

134 50020 -

7/8"-20 -

8-1/2

215

7/8"-20 -

8-1/2

225

2.0L TIBURON w/5 SPD

NOTE: PULL-TYPE CLUTCH Pressure Plate : Disc : PP & Disc : -

*

-

215

NOTE: PULL-TYPE CLUTCH, FOR USE ON DMF ONLY, SOLID DISC HUB. Pressure Plate : 11292271 Disc : 23292271 PP & Disc : DF292271 01292271 * 2004. - 2008.

*

8-1/2

215

2.7L V6 ENG. 5 SPD. TO 3/03 & 6 SPD. TO 1/03

NOTE: PULL-TYPE CLUTCH Pressure Plate : Disc : PP & Disc : 2003. - 2008.

CFT178157

2.0L TIBURON

NOTE: PULL-TYPE CLUTCH Pressure Plate : Disc : PP & Disc : 2003.

215

134 50020 -

7/8"-20 # Clutch Pattern

134 50020 -

INFINITI G-20 1991. - 2002. Pressure Plate : Disc : PP & Disc :

2.0L G-20 -

215 -

DF914812

* *

8-1/2 -

13/16"-18 # Clutch Pattern

433 50068 -

G-35 6 CYLINDER 2003. - 2006.

3.5L ENG. 6SPD

250

NOTE: SPRUNG DISC HUB, W/DMF Pressure Plate : Disc : PP & Disc : -

DF633140

-

*

9-3/4 -

1"-24 # Clutch Pattern

50001 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

92

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Dual Friction DF Disc DF PP & Disc

Counterbalance T.O.B. Align Tool Pilot Bearing

INFINITI I-30

1996. - 1999. Pressure Plate : Disc : PP & Disc :

3.0L I-30 DOHC VQ30DE ENG. CF007901 -

240 DF901007

11901007 23901007 01901007

-

-

9-7/16 -

1"-24 # Clutch Pattern

809 50001 -

ISUZU LIGHT TRUCK, SUV & VAN AMIGO 1989. - 1994. Pressure Plate : Disc : PP & Disc :

2.3L AMIGO 4ZD1 ENG. CF021550 -

215

1989. - 1994. Pressure Plate : Disc : PP & Disc :

2.6L AMIGO 4ZE1 ENG. CF023547 -

1998. - 1999. Pressure Plate : Disc : PP & Disc :

2.2L AMIGO w/BW TRANS ID #MM5 CF023547 -

1998. - 1999. Pressure Plate : Disc : PP & Disc :

2.2L AMIGO w/MUA TRANS. ID #RMN CF023547 -

2000. - 2002. Pressure Plate : Disc : PP & Disc :

2.2L AMIGO CF023547

8-19/32 -

240 DF547023

-

DF547023

-

-

-

-

-

DF547023

-

DF120170

-

1"-24 # Clutch Pattern

9-7/16 -

240

1"-24 # Clutch Pattern

9-7/16

240 DF547023

# Clutch Pattern

9-7/16

240

1"-24 -

1"-24 # Clutch Pattern

9-7/16 -

1"-24 # Clutch Pattern

010 812 812 812 -

HOMBRE 1996. - 2001. Pressure Plate : Disc : PP & Disc :

2.2L GM ENG ONLY CFT361170 384120 -

236

*

*

9-1/4 -

1-1/8"-26 # Clutch Pattern

N1764 53026 -

PICK UPS 1981. - 1982. Pressure Plate : Disc : PP & Disc :

1.8L 4 WD ONLY G180Z ENG. CF626512 CFT512626

1981. - 1985. Pressure Plate : Disc : PP & Disc :

2.2L 4 WD DIESEL ENG. CF626512 CFT512626

1983. - 1986. Pressure Plate : Disc : PP & Disc :

1.9L 2 & 4 WD G200Z ENG. CF626512 CFT512626

1986. - 1995. Pressure Plate : Disc : PP & Disc :

2.3L 2 & 4 WD 4ZD1 ENG. CF021550 -

1988. - 1995. Pressure Plate : Disc : PP & Disc :

2.6L 2 & 4 WD 4ZE1 ENG. CF023547 -

1991. - 1994. Pressure Plate : Disc : PP & Disc :

3.1L V6 ENG. 2 & 4 WD -

215 DF512626

-

8-19/32 -

215 DF512626

-

DF512626

-

-

-

-

DF547023

-

-

DF569040

-

1"-24 # Clutch Pattern

9-7/16 -

246

1"-24 # Clutch Pattern

8-19/32

240

1"-24 # Clutch Pattern

8-19/32

215 -

# Clutch Pattern

8-19/32

215

1"-24 -

1"-24 # Clutch Pattern

9-5/8 -

1"-24 # Clutch Pattern

010 010 010 010 812 812 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

93

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Dual Friction DF Disc DF PP & Disc

Counterbalance T.O.B. Align Tool Pilot Bearing

ISUZU LIGHT TRUCK, SUV & VAN RODEO

1990. - 1997. Pressure Plate : Disc : PP & Disc :

2.6L RODEO 4ZE1 ENG. CF023547 -

1991.07 - 1992. Pressure Plate : Disc : PP & Disc :

3.1L RODEO V-6 BW TRANS, 2WD CF361904 CFT361904 384201 384201 -

1991.07 - 1992. Pressure Plate : Disc : PP & Disc : 1998. - 2003. Pressure Plate : Disc : PP & Disc :

3.1L RODEO V-6 MUA TRANS, 4WD 2.2L RODEO & RODEO SPORT CF023547 -

240 DF547023

-

9-7/16 -

236 DF201904

-

DF569040

-

-

DF547023

-

DF512626

-

1"-14 # Clutch Pattern

9-5/8 -

240

812 -

# Clutch Pattern

9-1/4

246

1"-24 -

N1716 53006 -

1"-24 -

812 -

# Clutch Pattern

9-7/16 -

1"-24 -

812 -

# Clutch Pattern

TROOPER 1985.06 - 1987.06 2.3L TROOPER 4ZD1 ENG. Pressure Plate : Disc : PP & Disc : CF626512 CFT512626 1987.07 - 1992. Pressure Plate : Disc : PP & Disc :

2.6L TROOPER 4ZE1 ENG. CF023547 -

1988.11 - 1992. Pressure Plate : Disc : PP & Disc :

2.8L TROOPER CF132560

215

8-19/32 -

240 DF547023

-

-

DF560132

-

010 -

# Clutch Pattern

9-7/16 -

232

1"-24 1"-24 -

812 -

# Clutch Pattern

9-1/8 -

1"-24 -

812 -

# Clutch Pattern

JEEP CJ, DJ, TJ, YJ & JK CHEROKEE, COMANCHE, DISPATCHER, SPT WGN, WAGONEER, WRANGLER 4 CYLINDER 1979. - 1983. Pressure Plate : Disc : PP & Disc :

2.5L 151" w/GM ENG. CF361878 383824 -

9-1/8

1982. - 1985. Pressure Plate : Disc : PP & Disc :

2.5L 150" w/AMC ENG. CF361900 384201 -

1986. Pressure Plate : Disc : PP & Disc :

2.5L 151" ENG. 4 SPD. ONLY CF361900 384201 -

1986. Pressure Plate : Disc : PP & Disc :

2.5L 151" ENG. 5 SPD. ONLY MS361914 *

1986. - 1988. Pressure Plate : Disc : PP & Disc :

2.4L 145" ENG. EXC.CJ MS361914 *

1987. - 2002. Pressure Plate : Disc : PP & Disc :

2.5L 151" ENG. (W/ INTERNAL SLAVE CYL.) MS361914 DF201614 *

DF824878

-

-

# Clutch Pattern

9-1/8 DF201900

-

-

-

-

-

*

-

-

*

-

*

1"-14 # Clutch Pattern

9-1/8 -

1"-14 # Clutch Pattern

9-1/8 DF201614

1"-14 # Clutch Pattern

9-1/8 DF201614

1"-14 # Clutch Pattern

9-1/8 DF201900

1-1/8"-10 -

-

1"-14 # Clutch Pattern

N1729 53010 53006 53006 53006 53006 53006 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

94

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Dual Friction DF Disc DF PP & Disc

Counterbalance T.O.B. Align Tool Pilot Bearing

JEEP CJ, DJ, TJ, YJ & JK CHEROKEE, COMANCHE, DISPATCHER, SPT WGN, WAGONEER, WRANGLER - Cont. 4 CYLINDER

1994. - 2002. Pressure Plate : Disc : PP & Disc :

2.5L 151" ENG. (W/ EXTERNAL SLAVE CYL.) MS361914 DF201614 *

9-1/8

*

-

-

-

-

1"-14 # Clutch Pattern

N1764 53006 -

6 CYLINDER 1966. - 1971. Pressure Plate : Disc : PP & Disc :

3.7L 225" ENG. CF361662 383271 -

1972. - 1975. Pressure Plate : Disc : PP & Disc :

3.8L 232" ENG. CF361675 384193 -

1972. - 1975.

4.2L 258" ENG.

10.4 CFT361675 384193 -

DF383271 DF193675

-

-

3.8L 232" ENG. CJ's CF361675 CFT361675 384180 384180 -

1976. - 1979. Pressure Plate : Disc : PP & Disc :

4.2L 258" ENG. CJ's CF361675 CFT361675 384180 384180 -

DF383271 DF193675

-

DF381021 DF180675

-

DF381021 DF180675

-

-

-

-

-

4.2L 258" ENG. CJ's CF361675 CFT361675 384193 384193 -

# Clutch Pattern

-

-

# Clutch Pattern

-

DF383271 DF193675

-

# Clutch Pattern

-

N1439 52010 N1439 52010 -

N1491 51009 -

N1491 51009 -

1-1/8"-10 -

10.4

N1489 51009 -

1-1/8"-10 -

10.4

N1489 51009 -

1-1/8"-10 -

10.4

DF383271 DF193675

1-1/16"-10 # Clutch Pattern

10.4

DF383271 DF193675

1-1/16"-10 # Clutch Pattern

10.4

NEW! 1980. - 1981. 4.2L 258" ENG. CHEROKEE, WAGONEER NOTE: O.E. CLUTCH DISC MAY BE 10.95" Pressure Plate : CF361675 CFT361675 Disc : 384193 384193 DF383271 PP & Disc : DF193675 1980. - 1981. Pressure Plate : Disc : PP & Disc :

# Clutch Pattern

-

N1489 51009 -

1-1/8"-10 -

10.4

4.2L 258" ENG. CHEROKEE, WAGONEER

NOTE: O.E. CLUTCH DISC MAY BE 10.95" Pressure Plate : CF361675 CFT361675 Disc : 384193 384193 PP & Disc : -

# Clutch Pattern

-

N1489 51009 -

1-1/8"-10 -

10.4

3.8L 232" ENG. CHEROKEE, WAGONEER

NOTE: O.E. CLUTCH DISC MAY BE 10.95" Pressure Plate : CF361675 CFT361675 Disc : 384193 384193 PP & Disc : -

# Clutch Pattern

-

N1178 53010 -

1-1/8"-10 -

10.4

DF383271 DF193675

1-1/8"-10 # Clutch Pattern

-

4.2L 258" ENG. CHEROKEE, WAGONEER

1976. - 1978. Pressure Plate : Disc : PP & Disc :

1978. - 1979.

-

3.8L 232" ENG. CHEROKEE, WAGONEER

NOTE: O.E. CLUTCH DISC MAY BE 10.95" Pressure Plate : CF361675 CFT361675 Disc : 384193 384193 PP & Disc : -

1978.

-

10.4

NOTE: O.E. CLUTCH DISC MAY BE 10.95" Pressure Plate : CF361675 CFT361675 Disc : 384193 384193 PP & Disc : 1976. - 1977.

DF383271 DF193675

1-1/8"-10 # Clutch Pattern

10.4

NOTE: O.E. CLUTCH DISC MAY BE 10.95" Pressure Plate : CF361675 CFT361675 Disc : 384193 384193 PP & Disc : 1976. - 1977.

DF271662

1-1/8"-10 # Clutch Pattern

N1491 53010 N1439 53010 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

95

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Dual Friction DF Disc DF PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Counterbalance T.O.B. Align Tool Pilot Bearing

JEEP CJ, DJ, TJ, YJ & JK CHEROKEE, COMANCHE, DISPATCHER, SPT WGN, WAGONEER, WRANGLER - Cont. 6 CYLINDER

1982. - 1985. Pressure Plate : Disc : PP & Disc :

4.2L 258" ENG. CF361897 384193 -

10.4

1984. - 1986. Pressure Plate : Disc : PP & Disc :

2.8L 171" ENG. CF361904 384201 -

NEW! 1986. Pressure Plate : Disc : PP & Disc :

4.0L 242" & 4.2L 258" (INTERNAL SLAVE) CF361890 CFT361890 384193 384193 DF383271 DF193890

CFT361897 384193 -

DF383271 DF193897

-

CFT361904 384201 -

DF201904

-

NEW! 1988. - 1990. 4.2L 258" (INTERNAL SLAVE) NOTE: NODULAR CAST IRON FLYWHEEL. NOT SFI APPROVED FOR COMPETITION USE. Pressure Plate : CF361890 CFT361890 Disc : 384193 384193 DF383271 PP & Disc : DF193890 NEW! 1991. - 2004. 4.0L 242" (INTERNAL SLAVE) NOTE: NODULAR CAST IRON FLYWHEEL. NOT SFI APPROVED FOR COMPETITION USE. Pressure Plate : CF361890 CFT361890 Disc : 384193 384193 DF383271 PP & Disc : DF193890 NEW! 1994. - 2004. 4.0L 242" ENG. (W/ EXTERNAL SLAVE CYL.) NOTE: NODULAR CAST IRON FLYWHEEL. NOT SFI APPROVED FOR COMPETITION USE. Pressure Plate : CF361890 CFT361890 Disc : 384193 384193 DF383271 PP & Disc : DF193890 -

-

-

CFT361890 384193 -

3.8L 230" ENG. SMF CF360981 CFT360981 383914 383914 -

#2 Clutch Pattern

10.4 -

-

#2 Clutch Pattern

10.4 -

#2 Clutch Pattern

-

#2 Clutch Pattern

#2 Clutch Pattern

DF383271 DF193675

-

-

53006 53010 0 IN/OZ 53010 0 IN/OZ 53010 0 IN/OZ 53010 0 IN/OZ N1764 53010 -

53010 -

1-1/8"-10 #2 Clutch Pattern

10.4

N1439 53010 -

1-1/8"-10 -

-

1-1/8"-10 400469 -

-

-

1-1/8"-10 400469 -

10.4

DF098391

1-1/8"-10 400472 -

10.4

DF383271 DF193890

1-1/8"-10 400472 -

10.4 DF383271 DF193890

1-1/8"-10 #2 Clutch Pattern

10.4

4.0L 242" ENG. (W/ EXTERNAL SLAVE CYL.)

NOTE: INCLUDES 6 SPD. Pressure Plate : CF361890 Disc : 384193 PP & Disc : 2007. - 2008. Pressure Plate : Disc : PP & Disc :

CFT361890 384193 -

1"-14 # Clutch Pattern

-

4.0L 242" (INTERNAL SLAVE)

NOTE: INCLUDES 6 SPD. Pressure Plate : CF361890 Disc : 384193 PP & Disc : 2005. - 2006.

10.4

-

1-1/8"-10 # Clutch Pattern

9-1/8

NEW! 1987. - 1990. 4.0L 242" (INTERNAL SLAVE) NOTE: NODULAR CAST IRON FLYWHEEL. NOT SFI APPROVED FOR COMPETITION USE. Pressure Plate : CF361890 CFT361890 Disc : 384193 384193 DF383271 PP & Disc : DF193890 -

2005. - 2006.

-

1-1/8"-10 # Clutch Pattern

N1764 53010 N1764 -

8 CYLINDER 1965. - 1968. Pressure Plate : Disc : PP & Disc :

5.4L 327" ENG. CF361675 384193 -

1968. - 1971. Pressure Plate : Disc : PP & Disc :

5.7L 350" ENG. CF165552 383735 -

10.4 CFT361675 384193 CFT165552 383735 -

DF383735 DF735552

11165552 23383735 01735552

1-1/8"-10 # Clutch Pattern

11 LM165552 LM383735 LM735552

1-1/8"-10 # Clutch Pattern

53010 53010 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

96

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Dual Friction DF Disc DF PP & Disc

Counterbalance T.O.B. Align Tool Pilot Bearing

JEEP CJ, DJ, TJ, YJ & JK CHEROKEE, COMANCHE, DISPATCHER, SPT WGN, WAGONEER, WRANGLER - Cont. 8 CYLINDER

1971. - 1973. Pressure Plate : Disc : PP & Disc :

5.0L 304" ENG. CF361675 384193 -

1974. - 1975. Pressure Plate : Disc : PP & Disc :

5.0L 304" ENG. CF361675 384193 -

1974. - 1978.

6.6L 401" ENG.

10.4 CFT361675 384193 CFT361675 384193 -

DF383271 DF193675

-

DF383271 DF193675

-

-

5.0L 304" ENG. CF361675 384180 -

5.0L 304" ENG. CF361675 384193 -

-

-

# Clutch Pattern

-

DF381021 DF180675

-

# Clutch Pattern

DF383271 DF193675

-

-

DF383271 DF193675

-

-

CFT360981 383914 -

DF098391

-

-

N1491 51009 -

N1491 51009 N1439 52010 -

1-1/8"-10 # Clutch Pattern

10.4 CFT361675 384193 -

1-1/16"-10 # Clutch Pattern

10.4

N1489 51009 -

1-1/8"-10 -

-

N1491 51009 -

1-1/8"-10 -

10.4 CFT361675 384180 -

1-1/8"-10 # Clutch Pattern

10.4 DF383271 DF193675

1-1/8"-10 # Clutch Pattern

5.9L 360" ENG.

NEW! 1980. - 1984. 5.9L 360" ENG. NOTE: O.E. CLUTCH DISC MAY BE 10.95" Pressure Plate : CF361675 CFT361675 Disc : 384193 384193 PP & Disc : 1980. - 1985. Pressure Plate : Disc : PP & Disc :

-

10.4

NOTE: O.E. CLUTCH DISC MAY BE 10.95" Pressure Plate : CF361675 CFT361675 Disc : 384193 384193 PP & Disc : 1976. - 1979. Pressure Plate : Disc : PP & Disc :

-

10.4

NOTE: O.E. CLUTCH DISC MAY BE 10.95" Pressure Plate : CF361675 CFT361675 Disc : 384193 384193 PP & Disc : 1974. - 1979.

DF383271 DF193675

1-1/8"-10 # Clutch Pattern

N1491 53010 N1439 53010 -

LIBERTY 6 CYLINDER 3.7L 225" ENG NEW! 2002 - 2004 Pressure Plate : CF360981 Disc : 383914 PP & Disc : -

10.4

1-1/8"-10 # Clutch Pattern

-

LIGHT TRUCKS INCLUDING: COMANCHE TRUCK, GLADIATOR & J-SERIES 4 CYLINDER 1987. - 2002. Pressure Plate : Disc : PP & Disc :

2.5L 151" ENG. (W/ INTERNAL SLAVE CYL.) MS361914 DF201614 *

1994. - 2002. Pressure Plate : Disc : PP & Disc :

2.5L 151" ENG. (W/ EXTERNAL SLAVE CYL.) MS361914 DF201614 *

9-1/8 -

*

-

# Clutch Pattern

9-1/8

*

-

-

-

-

1"-14 1"-14 # Clutch Pattern

53006 N1764 53006 -

6 CYLINDER 1966. - 1972. Pressure Plate : Disc : PP & Disc :

3.8L 232" ENG. CF361675 384193 -

1973. Pressure Plate : Disc : PP & Disc :

4.2L 258" ENG. CF361675 384193 -

10.4 CFT361675 384193 -

DF383271 DF193675

# Clutch Pattern

10.4 CFT361675 384193 -

DF383271 DF193675

-

1-1/8"-10 -

-

1-1/8"-10 # Clutch Pattern

N1489 53010 N1491 51009 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

97

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Dual Friction DF Disc DF PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Counterbalance T.O.B. Align Tool Pilot Bearing

JEEP LIGHT TRUCKS INCLUDING: COMANCHE TRUCK, GLADIATOR & J-SERIES - Continued 6 CYLINDER

1974. - 1977. Pressure Plate : Disc : PP & Disc :

3.8L 232" ENG. CF361675 384193 -

1974. - 1977. Pressure Plate : Disc : PP & Disc :

4.2L 258" ENG. CF361675 384193 -

1978. Pressure Plate : Disc : PP & Disc :

3.8L 232" ENG. CF361675 384193 -

1978. - 1979. Pressure Plate : Disc : PP & Disc :

4.2L 258" ENG. CF361675 384193 -

NEW! 1980. - 1981. 4.2L 258" ENG. Pressure Plate : CF361675 Disc : 384193 PP & Disc : -

10.4 CFT361675 384193 -

DF383271 DF193675

-

CFT361675 384193 -

DF383271 DF193675

-

DF383271 DF193675

-

CFT361675 384193 -

DF383271 DF193675

-

-

DF383271 DF193675

1984. - 1986. Pressure Plate : Disc : PP & Disc :

2.8L 171" ENG. CF361904 384201 -

NEW! 1986. Pressure Plate : Disc : PP & Disc :

4.0L 242" & 4.2L 258" (INTERNAL SLAVE) CF361890 CFT361890 384193 384193 DF383271 DF193890

-

-

DF383271 DF193897

-

-

DF201904

-

-

NEW! 1987. - 1990. 4.0L 242" (INTERNAL SLAVE) NOTE: NODULAR CAST IRON FLYWHEEL. NOT APPROVED FOR COMPITITION USE. Pressure Plate : CF361890 CFT361890 Disc : 384193 384193 DF383271 PP & Disc : DF193890 NEW! 1988. - 1990. 4.2L 258" (INTERNAL SLAVE) NOTE: NODULAR CAST IRON FLYWHEEL. NOT APPROVED FOR COMPITITION USE. Pressure Plate : CF361890 CFT361890 Disc : 384193 384193 DF383271 PP & Disc : DF193890 -

-

-

1-1/8"-10 400472 #2 Clutch Pattern

10.4 -

1-1/8"-10 400472 #2 Clutch Pattern

10.4 -

1-1/8"-10 400469 #2 Clutch Pattern

10.4

NOTE: NODULAR CAST IRON FLYWHEEL. NOT APPROVED FOR COMPITITION USE. Pressure Plate : CF361890 CFT361890 Disc : 384193 384193 DF383271 PP & Disc : DF193890 -

1-1/8"-10 #2 Clutch Pattern

10.4

4.0L 242" ENG. (W/ EXTERNAL SLAVE CYL.)

1"-14 # Clutch Pattern

-

4.0L 242" (INTERNAL SLAVE)

NOTE: NODULAR CAST IRON FLYWHEEL. NOT APPROVED FOR COMPITITION USE. Pressure Plate : CF361890 CFT361890 Disc : 384193 384193 DF383271 PP & Disc : DF193890 -

1-1/8"-10 # Clutch Pattern

10.4 -

1-1/8"-10 # Clutch Pattern

9-1/8 CFT361904 384201 -

1-1/8"-10 # Clutch Pattern

10.4 CFT361897 384193 -

1-1/8"-10 # Clutch Pattern

10.4 CFT361675 384193 -

1-1/8"-10 # Clutch Pattern

10.4

4.2L 258" ENG. CF361897 384193 -

1994. - 2003.

10.4

CFT361675 384193 -

1-1/8"-10 # Clutch Pattern

10.4

1982. - 1985. Pressure Plate : Disc : PP & Disc :

1991. - 2003.

-

-

1-1/8"-10 400469 #2 Clutch Pattern

N1489 51009 N1489 51009 N1489 51009 N1491 51009 N1491 53010 N1439 53010 53006 53010 0 IN/OZ 53010 0 IN/OZ 53010 0 IN/OZ 53010 0 IN/OZ N1764 53010 -

8 CYLINDER 1955. - 1968. Pressure Plate : Disc : PP & Disc :

5.4L 327" ENG. CF361675 384193 -

10.4 CFT361675 384193 -

DF383271 DF193675

-

-

1-1/8"-10 # Clutch Pattern

53010 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

98

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Dual Friction DF Disc DF PP & Disc

Counterbalance T.O.B. Align Tool Pilot Bearing

JEEP LIGHT TRUCKS INCLUDING: COMANCHE TRUCK, GLADIATOR & J-SERIES - Continued 8 CYLINDER

1968. - 1971. Pressure Plate : Disc : PP & Disc :

5.7L 350" ENG. CF165552 383735 -

1971. - 1973. Pressure Plate : Disc : PP & Disc :

5.0L 304" ENG. CF361675 384193 -

1974. - 1978.

6.6L 401" ENG.

CFT165552 383735 CFT361675 384193 -

DF383271 DF193675

-

-

DF383271 DF193675

-

-

-

DF383271 DF193675

-

-

N1491 53010 -

N1491 51009 -

1-1/8"-10

# Clutch Pattern

10.4

N1491 53010 -

1-1/8"-10

-

5.9L 360" ENG.

NOTE: O.E. CLUTCH DISC MAY BE 10.95" Pressure Plate : CF361675 CFT361675 Disc : 384193 384193 PP & Disc : -

1-1/8"-10 -

#2 Clutch Pattern

10.4 -

# Clutch Pattern

-

5.9L 360" ENG. DF383271 DF193675

1-1/8"-10 -

# Clutch Pattern

10.4

NOTE: O.E. CLUTCH DISC MAY BE 10.95" Pressure Plate : CF361675 CFT361675 Disc : 384193 384193 PP & Disc : 1980. - 1983.

11 LM165552 LM383735 LM735552

11165552 23383735 01735552

10.4

NOTE: O.E. CLUTCH DISC MAY BE 10.95" Pressure Plate : CF361675 CFT361675 Disc : 384193 384193 PP & Disc : 1974. - 1979.

DF383735 DF735552

N1491 51009 -

1-1/8"-10 # Clutch Pattern

N1439 53010 -

KIA OPTIMA 2001. - 2006.

2.4L ENG

225

NOTE: PULL-TYPE CLUTCH, FOR USE ON DMF ONLY, SOLID DISC HUB. Pressure Plate : 11292271 Disc : 23292271 PP & Disc : DF292271 01292271 *

* *

8-7/8 -

7/8"-20 # Clutch Pattern

134 50020 -

LEXUS ES-250 1990. - 1991. Pressure Plate : Disc : PP & Disc :

2.5L ES-250 2VZ-FE ENG. CF018900 *

DF900018

236

3.0L ES-300 3VZ-FE 6 CYL. ENG. CF018905 *

DF900018

*

11905018 23500100 01905018

*

11905018 23500100 01905018

* *

9-1/4 -

1-1/8"-21 # Clutch Pattern

446 50011 -

ES-300 1992. - 1993. Pressure Plate : Disc : PP & Disc :

236

* *

9-1/4 -

1-1/8"-21 # Clutch Pattern

446 50011 -

IS-300 NEW! 2002. - 2005. 3.0L 6 CYL. ENG 2JZ-GE NOTE: ****SOLID DISC HUB TO BE USED WITH OE DMF ONLY**** Pressure Plate : Disc : PP & Disc : CFT505156 DF505156 NOTE: SPRUNG DISC TO BE USED WITH AFTERMARKET SMF ONLY Pressure Plate : Disc : PP & Disc : DF505018

236

9-1/4

-

-

11505018 23500100 01505018

-

1-1/8"-21 # Clutch Pattern

# Clutch Pattern

444 50011 444 50011 -

SC-300 1992. - 1997. Pressure Plate : Disc : PP & Disc :

3.0L SC-300 2JZ-GE 6 CYL. ENG. CF018522 CFT522018

236 DF522018

11522018 23500100 01522018

9-1/4 -

1-1/8"-21 # Clutch Pattern

444 50011 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

99

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Dual Friction DF Disc DF PP & Disc

Counterbalance T.O.B. Align Tool Pilot Bearing

MAZDA 323, GLC

1987. - 1989. Pressure Plate : Disc : PP & Disc :

1.6L 323 TURBO & 4 WD CF007543 CFT543007

225 DF543007

11543056 23543056 01543056

DF543007

11543056 23543056 01543056

8-7/8 -

15/16"-22 # Clutch Pattern

091 50005 -

626 1982.10 - 1987.09 2.0L 626 TURBO & NON-TURBO Pressure Plate : Disc : PP & Disc : CF007543 CFT543007

225

1987.10 - 1992. Pressure Plate : Disc : PP & Disc :

2.2L 626 TURBO F2 ENG. CF300500 CFT500300

1988. - 1992. Pressure Plate : Disc : PP & Disc :

2.2L 626 NON-TURBO F2 ENG. CF007543 CFT543007

DF543007

11543056 23543056 01543056

1993. - 2002. Pressure Plate : Disc : PP & Disc :

2.0L 626 CF003900

DF900003

11900003 23543056 01900003

1993. - 2002. Pressure Plate : Disc : PP & Disc :

2.5L 626 V-6 ENG. CF056543 CFT543056

8-7/8 -

240 DF500300

11500300 23544020 01500300

-

DF543056

11543056 23543056 01543056

15/16"-22 # Clutch Pattern

8-7/8 -

225

1"-23 # Clutch Pattern

8-7/8

225 -

# Clutch Pattern

9-7/16

225

15/16"-22 -

15/16"-22 # Clutch Pattern

8-7/8 -

15/16"-22 # Clutch Pattern

091 50005 091 52008 091 50005 091 50005 091 50005 -

MIATA, MX-5 1989.03 - 1993.

1.6L MIATA MX-5

200

NOTE: FLYWHEEL CAN BE USED WITH MAZDA COMP #0000-02-5403 Pressure Plate : Disc : PP & Disc : CF053581 DF581053 1994. - 2005.

11581053 23581053 01581053

1.8L MIATA MX-5

7-7/8 -

225

NOTE: O.E. CLUTCH DISC MAY BE 8-1/2" Pressure Plate : Disc : PP & Disc : CF019580 -

DF580019

11580019 23543056 01580019

DF503003

-

15/16"-22 800826 #9 Clutch Pattern

8-7/8 -

0 IN/OZ 813 50005 -

15/16"-22 # Clutch Pattern

813 50005 -

MX-3 1992. - 1993. Pressure Plate : Disc : PP & Disc :

1.8L MX-3 V-6 ENG. CF003503

1994. - 1995. Pressure Plate : Disc : PP & Disc :

1.6L MX-3 CF004613 * 1.8L MX-3 V-6 ENG. -

1994. - 1995. Pressure Plate : Disc : PP & Disc :

215 -

8-19/32 -

200 -

DF613004

-

*

-

DF604072

-

DF543056

11543056 23543056 01543056

# Clutch Pattern

7-7/8 -

225

15/16"-22 7/8"-20 # Clutch Pattern

8-7/8 -

15/16"-22 # Clutch Pattern

091 50005 453 50020 091 50005 -

MX-6 1988. - 1992. Pressure Plate : Disc : PP & Disc :

2.2L MX-6 NON-TURBO CF056543 CFT543056

1988. - 1992. Pressure Plate : Disc : PP & Disc :

2.2L MX-6 TURBO CF300500 CFT500300

225

8-7/8 -

240 DF500300

11500300 23544020 01500300

15/16"-22 # Clutch Pattern

9-7/16 -

1"-23 # Clutch Pattern

091 50005 091 52008 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

100

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Dual Friction DF Disc DF PP & Disc

-

DF900003

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Counterbalance T.O.B. Align Tool Pilot Bearing

MAZDA MX-6 - Continued

1993. - 2002. Pressure Plate : Disc : PP & Disc :

2.0L MX-6 CF003900

225

1993. - 2002. Pressure Plate : Disc : PP & Disc :

2.5L MX-6 V-6 ENG. CF056543 CFT543056

11900003 23543056 01900003

8-7/8 -

225 DF543056

11543056 23543056 01543056

DF003503

11003503 23543056 01003503

15/16"-22 # Clutch Pattern

8-7/8 -

15/16"-22 # Clutch Pattern

091 50005 091 50005 -

PROTEGE 1989.08 - 1995. Pressure Plate : Disc : PP & Disc :

1.8L DOHC ENG. 2WD ONLY. -

215

1989.08 - 1995. Pressure Plate : Disc : PP & Disc :

1.8L DOHC ENG. 4WD ONLY. CF056543 CFT543056

DF543056

11543056 23543056 01543056

1995. - 1998. Pressure Plate : Disc : PP & Disc :

1.5L PROTEGE CF004613 *

DF613004

-

1998. - 2000. Pressure Plate : Disc : PP & Disc :

1.8L PROTEGE CF004613 *

1999. - 2001. Pressure Plate : Disc : PP & Disc :

1.6L PROTEGE CF004613 *

8-19/32 -

225

*

-

DF613004

-

*

7-7/8

-

DF613004

-

-

*

7/8"-20 # Clutch Pattern

7-7/8

200

15/16"-22 # Clutch Pattern

200

-

# Clutch Pattern

8-7/8

200 -

15/16"-22 -

7/8"-20 # Clutch Pattern

7-7/8 -

7/8"-20 # Clutch Pattern

091 50005 091 50005 453 50020 453 50020 453 50020 -

RX 1970.10 - 1974. Pressure Plate : Disc : PP & Disc :

1.1L RX2 12A ENG. CF138374 CFT374138

1972.10 - 1978. Pressure Plate : Disc : PP & Disc :

1.1L RX3 12A ENG. CF138374 CFT374138

1973.10 - 1978. Pressure Plate : Disc : PP & Disc :

1.3L RX4 13B ENG. CF138374 CFT374138

1979. - 1982. Pressure Plate : Disc : PP & Disc :

1.1L RX7 12A ENG. CF138374 CFT374138

1983. - 1985.

215 DF374138

11374138 23374138 01374138 215

DF374138

11374138 23374138 01374138 215

DF374138

11374138 23374138 01374138

DF374138

-

11374138 23374138 01374138

1.1L RX7 12A ENG.

1.3L RX7 GSL-LE 13B ENG. NON-TURBO

-

NOTE: FLYWHEEL REQUIRES MAZDA AUTOMATICE TRANS. COUNTERBALANCE PLATE. Pressure Plate : 11532009 Disc : 23543056 PP & Disc : CF009532 CFT532009 DF532009 01532009

15/16"-22 #10 Clutch Pattern

8-7/8 -

225

15/16"-22 # Clutch Pattern

8-19/32

225

15/16"-22 # Clutch Pattern

8-19/32

215

15/16"-22 # Clutch Pattern

8-19/32 -

NOTE: FLYWHEEL REQUIRES MAZDA AUTOMATICE TRANS. COUNTERBALANCE PLATE. Pressure Plate : 11532009 Disc : 23543056 PP & Disc : CF009532 CFT532009 DF532009 01532009 1984. - 1989.

8-19/32 -

15/16"-22 700822 800822 #10 Clutch Pattern

8-7/8 -

15/16"-22 700822 800822 #10 Clutch Pattern

021 50005 021 50005 021 50005 091 50005 0 IN/OZ 091 50005 0 IN/OZ 091 50005 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

101

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Dual Friction DF Disc DF PP & Disc

Counterbalance T.O.B. Align Tool Pilot Bearing

MAZDA RX - Continued

1986. - 1988. Pressure Plate : Disc : PP & Disc :

1.3L RX7 TURBO 13BT ENG. CF020544 CFT544020

1986. - 1989.

240 DF544020

11544020 23544020 01544020

1.3L RX7 CONVERTIBLE 13B ENG.

225

NOTE: FLYWHEEL REQUIRES MAZDA AUTOMATICE TRANS. COUNTERBALANCE PLATE. Pressure Plate : 11532009 Disc : 23543056 PP & Disc : CF009532 CFT532009 DF532009 01532009 1989. - 1991.

1.3L RX7 TURBO 13B ENG. 11544020 23544020 01544020

1.3L RX7 NON-TURBO 13B ENG.

1.3L RX7 TWIN TURBO 13B ENG.

NOTE: PULL-TYPE CLUTCH Pressure Plate : Disc : PP & Disc : 2003. - 2009. Pressure Plate : Disc : PP & Disc :

-

DF950600

1.3L RX8 ROTARY 6SPD CF101641 CFT641101

*

11950600 23950600 01950600

* *

11544020 23544020 01544020

DF116116

-

#11 Clutch Pattern

-

15/16"-22 700822 800822 # Clutch Pattern

9-1/4 -

# Clutch Pattern

-

0 IN/OZ 091 50005 -

452 52008 0 IN/OZ 452 50005 -

1"-23 -

9-1/4

091 52008 -

1"-23 -

8-7/8

236 DF641101

#10 Clutch Pattern

9-1/8

236

15/16"-22 700822 800822

-

NOTE: FLYWHEEL REQUIRES MAZDA AUTOMATICE TRANS. COUNTERBALANCE PLATE. Pressure Plate : 11532009 Disc : 23543056 PP & Disc : CF059591 DF591059 01532009 1993. - 1996.

-

225

1"-23 #11 Clutch Pattern

8-7/8

230

NOTE: MAZDA DID NOT PRODUCE A 1992 RX7 TURBO Pressure Plate : Disc : PP & Disc : DF584058 1989. - 1992.

9-7/16 -

1"-23 # Clutch Pattern

52008 -

MAZDA LIGHT TRUCK, SUV & VAN NAVAJO 1991. - 1994. Pressure Plate : Disc : PP & Disc :

4.0L NAVAJO -

254 CFT116116

*

*

10 -

1"-23 # Clutch Pattern

52008 -

PICK UPS 1979. - 1985. Pressure Plate : Disc : PP & Disc :

2.0L B-2000 MA ENG. CF138374 CFT374138

1981.10 - 1985. Pressure Plate : Disc : PP & Disc :

2.2L B-2200 DIESEL ENG. CF009532 CFT532009

DF532009

11532009 23543056 01532009

1986. - 1987. Pressure Plate : Disc : PP & Disc :

2.0L B-2000 FE ENG. CF018538 -

DF538018

-

1987.06 - 1993. Pressure Plate : Disc : PP & Disc :

2.2L B-2200 F2 ENG. CF007535 -

1987.08 - 1989.12

215 DF374138

11374138 23374138 01374138 225

CFT544020

-

DF535007

-

8-7/8

DF544020

11544020 23544020 01544020

15/16"-22 # Clutch Pattern

8-7/8 -

240

15/16"-22 # Clutch Pattern

225

15/16"-22 # Clutch Pattern

8-7/8

225

2.6L B-2600 2 & 4 WD G6 ENG.

NOTE: CARBURETED Pressure Plate : Disc : PP & Disc : CF020544

8-19/32 -

15/16"-22 # Clutch Pattern

9-7/16 -

021 50005 091 50005 091 50005 091 50005 -

1"-23 # Clutch Pattern

091 52008 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

102

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Dual Friction DF Disc DF PP & Disc

Counterbalance T.O.B. Align Tool Pilot Bearing

MAZDA LIGHT TRUCK, SUV & VAN PICK UPS - Continued

1990. - EOP. Pressure Plate : Disc : PP & Disc :

2.2L B-2200 CF007585

1993. - 1994.10 Pressure Plate : Disc : PP & Disc :

2.3L B-2300 CF360014 381113 -

1993. - 1994.10 Pressure Plate : Disc : PP & Disc :

3.0L B-3000 CF360032 381009 -

1994. - 1998. Pressure Plate : Disc : PP & Disc :

4.0L B-4000 -

1994.11 - 1997. Pressure Plate : Disc : PP & Disc :

2.3L B-2300 CF361975 * 381963 -

1994.11 - 2007. Pressure Plate : Disc : PP & Disc :

3.0L B-3000 CF361975 * 381975 -

1998. - 2004. Pressure Plate : Disc : PP & Disc :

2.5L B-2500 CF361996 * 381995 -

1999. - 2000. Pressure Plate : Disc : PP & Disc :

4.0L B-4000 -

2001. - 2009. Pressure Plate : Disc : PP & Disc :

2.3L B-2300 CF361996 * 381995 -

2001. - 2009. Pressure Plate : Disc : PP & Disc :

4.0L B4000 -

225 -

DF585007

-

8-7/8 -

225 -

DF113014

-

CFT360032 381009 -

DF009032

# Clutch Pattern

8-7/8 -

225 -

*

DF116116

-

-

*

-

DF963975

-

-

*

-

DF975975

-

-

*

-

DF963975

-

-

*

CFT116116

DF993993

-

-

*

-

DF963975

-

-

*

DF145117

-

-

DF007507

-

DF203024

*

-

*

-

-

*

-

-

1"-23 # Clutch Pattern

8-7/8

1"-23 # Clutch Pattern

10-1/8" -

1"-23 # Clutch Pattern

10-5/16

225

1"-23 # Clutch Pattern

8-7/8

260

1"-23 # Clutch Pattern

9-1/8

225

1"-23 # Clutch Pattern

8-7/8

225

1"-23 # Clutch Pattern

10

225

1"-23 # Clutch Pattern

8-7/8

254 CFT116116

15/16"-22 -

-

1"-23 # Clutch Pattern

091 50005 N1750 52008 N1750 52008 52008 N1750 52008 N1750 52008 52008 52008 52008 52008 -

TRIBUTE 4 CYLINDER 2001. - 2004. Pressure Plate : Disc : PP & Disc :

2.0L ENG -

225

8-7/8

15/16"-22 # Clutch Pattern

N1710 50005 -

MERCURY BOBCAT 4 CYLINDER 1974. - 1980. Pressure Plate : Disc : PP & Disc :

2.3L 140" ENG. CF360024 * 281203 -

8-1/2

1"-23 700310 # Clutch Pattern

0 IN/OZ N1705 52008 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

103

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Dual Friction DF Disc DF PP & Disc

-

DF203024

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Counterbalance T.O.B. Align Tool Pilot Bearing

MERCURY CAPRI 4 CYLINDER

1977. - 1978. Pressure Plate : Disc : PP & Disc :

2.3L 140" ENG. CF360024 * 281203 -

1979. - 1982. Pressure Plate : Disc : PP & Disc :

2.3L 140"ENG. 4 & 5 SPD TURBO CF360024 * 281220 -

1979. - 1986.

8-1/2

-

1980. - 1980.09 Pressure Plate : Disc : PP & Disc :

2.3L 140" ENG. 5 SPD. NON-TURBO CF360024 * 281203 -

1980. - 1983. Pressure Plate : Disc : PP & Disc :

2.3L 140" ENG. 4 SPD. NON-TURBO CF360024 * 281220 -

1980.10 - 1981.12 2.3L 140" ENG. 5 SPD. NON-TURBO Pressure Plate : CF360024 * Disc : 281220 PP & Disc : -

DF220024

-

*

-

-

*

-

-

# Clutch Pattern

*

-

DF220024

-

*

-

2.3L 140" ENG. 5 SPD CF360024 * 281203 -

DF203024

1983. Pressure Plate : Disc : PP & Disc :

2.3L 140" ENG. 5 SPD FORD TRANS CF360024 * 281203 -

DF203024

-

*

-

*

-

*

-

-

CFT360035 281228 -

8-1/2

1.6L 98" ENG. TURBO -

11228035 23228035 01228035

-

-

-

DF490025

-

-

N1714 52010 -

N1705 52008 N1714 52008 N1714 52010 N1714 52010 N1714 52008 N1705 52008 -

1-1/16"-10 # Clutch Pattern

8-7/8 DF030543

1"-23 # Clutch Pattern

9 DF228035

1"-23 # Clutch Pattern

2.3L 140" ENG. 5 SPD

NOTE: WARNER TRANS. Pressure Plate : CF360035 Disc : 281228 PP & Disc : -

1-1/16"-10 # Clutch Pattern

8-1/2 -

1-1/16"-10 # Clutch Pattern

8-1/2 DF220024

1"-23 # Clutch Pattern

8-1/2

52008 -

1"-23 -

8-1/2 DF203024

1-1/16"-10 # Clutch Pattern

8-1/2 DF203024

1"-23 # Clutch Pattern

8-1/2

1980.12 - 1982. Pressure Plate : Disc : PP & Disc :

1991. - 1994. Pressure Plate : Disc : PP & Disc :

*

-

2.3L 140" ENG. NON-TURBO

NOTE: GERMAN TRANS. Pressure Plate : CF360024 * Disc : 281203 PP & Disc : -

1983. - 1987.

-

15/16"-22 # Clutch Pattern

N1714 52010 091 50005 -

8 CYLINDER 1979. - 1980. Pressure Plate : Disc : PP & Disc :

5.0L 302" ENG. CF360025 280490 -

1981. - 1985. Pressure Plate : Disc : PP & Disc :

5.0L 302" ENG. CF360025 280490 -

1986. - 1993. Pressure Plate : Disc : PP & Disc :

5.0L 302" ENG. CF360048 381021 -

10 CFT360025 280490 -

#4 Clutch Pattern

10 CFT360025 280490 CFT360048 381021 -

DF490025 DF381021 DF021048

11361830 23381021 01920830

1-1/16"-10 -

-

1-1/16"-10 # Clutch Pattern

10.4 LM360048 LM381021 LM021057

1-1/16"-10 #7 Clutch Pattern

N1714 52010 N1714 52010 N1714 52010 42001

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

104

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Dual Friction DF Disc DF PP & Disc

CFT360057 381021 -

DF381021 DF021057

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Counterbalance T.O.B. Align Tool Pilot Bearing

MERCURY CAPRI 8 CYLINDER

1994. - 1995. Pressure Plate : Disc : PP & Disc :

5.0L 302" ENG. CF360057 381021 -

11361830 23381021 01920830

10.4 LM360048 LM381021 LM021057

1-1/16"-10 #7 Clutch Pattern

N1714 52010 42001

COMET 6 CYLINDER 1974. - 1977.

4.1L 250" ENG.

10

NOTE: O.E. CLUTCH DISC MAY BE 10-1/2" Pressure Plate : CF360030 CFT360030 Disc : 280490 280490 PP & Disc : -

DF490030

-

-

1-1/16"-10 # Clutch Pattern

N1714 52010 -

8 CYLINDER 1963.

3.6L 221" ENG.

10

NOTE: O.E. CLUTCH DISC MAY BE 10-1/2" Pressure Plate : CF360030 CFT360030 Disc : 280490 280490 PP & Disc : 1963. - 1964.

-

# Clutch Pattern

10 DF490030

-

-

# Clutch Pattern

10 DF490030

-

-

#4 Clutch Pattern

NOTE: w/26 SPLINE AFTERMARKET TRANS. Pressure Plate : CFT260000 Disc : 388144 PP & Disc : 1966. - 1969. Pressure Plate : Disc : PP & Disc :

6.4L 390" ENG. CF260000 280700 -

1968. - 1969. Pressure Plate : Disc : PP & Disc :

5.8L 351" ENG. CF260000 280700 -

1968. - 1977.

5.0L 302" ENG.

11 DF388144 DF148000

-

-

CFT260000 280700 -

DF281226 DF700000

-

#5 Clutch Pattern

-

CFT260000 280700 -

DF281226 DF700000

-

-

DF490030

-

-

DF203024

-

-

1-1/16"-10 #5 Clutch Pattern

10

NOTE: O.E. CLUTCH DISC MAY BE 10-1/2" Pressure Plate : CF360030 CFT360030 Disc : 280490 280490 PP & Disc : -

1-1/16"-10 #5 Clutch Pattern

11

N1439 52010 -

1-1/8"-26 -

11

N1439 52010 -

1-1/16"-10 -

5.8L 351" & 6.4L 390" ENG

N1439 52010 -

1-1/16"-10 -

4.7L 289" ENG.

NOTE: O.E. CLUTCH DISC MAY BE 10-1/2" Pressure Plate : CF360030 CFT360030 Disc : 280490 280490 PP & Disc : 1966. - 1969.

-

4.3L 260" ENG.

NOTE: O.E. CLUTCH DISC MAY BE 10-1/2" Pressure Plate : CF360030 CFT360030 Disc : 280490 280490 PP & Disc : 1966. - 1967.

DF490030

1-1/16"-10

N1439 50048 N1439 52010 N1439 52010 -

1-1/16"-10 #4 Clutch Pattern

N1714 52010 -

COUGAR 4 CYLINDER 1980. - 1983. Pressure Plate : Disc : PP & Disc :

2.3L 140" ENG. 4 SPD. CF360024 * 281203 -

1983. - 1988. Pressure Plate : Disc : PP & Disc :

2.3L 140" ENG. TURBO 5 SPD. CF360035 CFT360035 281228 281228 -

8-1/2

*

# Clutch Pattern

9 DF228035

11228035 23228035 01228035

1"-23 700310 -

-

1-1/16"-10 # Clutch Pattern

0 IN/OZ N1705 52008 N1714 52010 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

105

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Dual Friction DF Disc DF PP & Disc

-

DF142142

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Counterbalance T.O.B. Align Tool Pilot Bearing

MERCURY COUGAR - Continued 4 CYLINDER

1999. - 2002. Pressure Plate : Disc : PP & Disc :

2.0L COUGAR -

9-7/16 -

-

11360049 23281226 01226049

-

*

1"-23 # Clutch Pattern

52008 -

6 CYLINDER 1989. - 1993. Pressure Plate : Disc : PP & Disc :

3.8L 231" ENG. SUPERCHARGER CF360049 CFT360049 281226 281226 -

1999. - 2002. Pressure Plate : Disc : PP & Disc :

2.5L INCLUDING H.O. ENG. -

11 DF281226 DF226049

# Clutch Pattern

9-7/16 DF988988

-

*

1-1/16"-10 -

-

1"-23 # Clutch Pattern

N1754 52010 52008 -

8 CYLINDER 1967.

4.7L 289" ENG.

10

NOTE: O.E. CLUTCH DISC MAY BE 10-1/2" Pressure Plate : CF360030 CFT360030 Disc : 280490 280490 PP & Disc : 1968. - 1969. Pressure Plate : Disc : PP & Disc :

6.4L 390" ENG. CF260000 280700 -

1968. - 1972. Pressure Plate : Disc : PP & Disc :

5.8L 351" ENG. CF260000 280700 -

1968. - 1973.

DF490030

-

#4 Clutch Pattern

11 CFT260000 280700 -

DF281226 DF700000

-

-

CFT260000 280700 -

DF281226 DF700000

-

10

1968. - 1973.

-

-

#4 Clutch Pattern

11

5.8L 351" CJ ENG. CF260000 CFT260000 280700 280700 -

-

-

DF281226 DF700000

-

-

DF009035

-

-

DF203024

-

-

N1439 52010 N1439 52010 -

N1439 52010 -

1-1/8"-26 #5 Clutch Pattern

11

N1439 52010 -

1-1/16"-10 -

5.8L 351" & 6.4L 390" ENG

NOTE: INCLUDES COBRA JET, w/26 SPLINE AFTERMARKET TRANS. Pressure Plate : CFT260000 Disc : 388144 DF388144 PP & Disc : DF148000

1-1/16"-10 #5 Clutch Pattern

5.0L 302" ENG. 3 SPD DF490030

1-1/16"-10 #5 Clutch Pattern

11

NOTE: O.E. CLUTCH DISC MAY BE 10-1/2" Pressure Plate : CF360030 CFT360030 Disc : 280490 280490 PP & Disc : -

1972. - 1973. Pressure Plate : Disc : PP & Disc :

-

1-1/16"-10

1-1/16"-10 #5 Clutch Pattern

N1439 50048 N1439 52010 -

MERKUR 4 CYLINDER 1985. - 1989. Pressure Plate : Disc : PP & Disc :

2.3L 140" ENG. TURBO XR4TI CF360035 CFT360035 381009 381009 -

9

1"-23 # Clutch Pattern

N1714 52008 -

MONARCH 4 CYLINDER 1980. - 1983. Pressure Plate : Disc : PP & Disc :

2.3L 140" ENG. CF360024 * 281203 -

8-1/2 -

*

1"-23 # Clutch Pattern

N1705 52008 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

106

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Dual Friction DF Disc DF PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Counterbalance T.O.B. Align Tool Pilot Bearing

MERCURY MONARCH - Continued 6 CYLINDER 1975. - 1980.

4.1L 250" ENG.

10

NOTE: O.E. CLUTCH DISC MAY BE 10-1/2" Pressure Plate : CF360030 CFT360030 Disc : 280490 280490 PP & Disc : -

DF490030

-

-

1-1/16"-10 # Clutch Pattern

N1714 52010 -

8 CYLINDER 1977. - 1979.

5.0L 302" ENG.

10

NOTE: O.E. CLUTCH DISC MAY BE 10-1/2" Pressure Plate : CF360030 CFT360030 Disc : 280490 280490 PP & Disc : -

DF490030

-

-

1-1/16"-10 #4 Clutch Pattern

N1714 52010 -

MONTCLAIR,MONTEREY, PARK LANE,MARQUIS TO 1972, BROUGHAM,CALIENTE,CUSTOM,CYCLONE 8 CYLINDER 1963. Pressure Plate : Disc : PP & Disc :

6.7L 406" ENG. CF260000 280700 -

1963. - 1970. Pressure Plate : Disc : PP & Disc :

6.4L 390" ENG. CF260000 280700 -

1963. - 1971.

11 CFT260000 280700 -

-

-

CFT260000 280700 -

DF281226 DF700000

-

-

5.8L 351", 6.4L 390" & 6.7L 406" ENG

5.8L 351" ENG. CF260000 280700 -

-

-

DF281226 DF700000

-

#5 Clutch Pattern

-

N1439 52010 N1439 52010 -

1-1/8"-26 -

11 CFT260000 280700 -

1-1/16"-10 #5 Clutch Pattern

11 DF388144 DF148000

1-1/16"-10 # Clutch Pattern

11

NOTE: w/26 SPLINE AFTERMARKET TRANS. Pressure Plate : CFT260000 Disc : 388144 PP & Disc : 1971. Pressure Plate : Disc : PP & Disc :

DF281226 DF700000

1-1/16"-10 #5 Clutch Pattern

N1439 50048 N1439 52010 -

MONTEGO 6 CYLINDER 1969. - 1973.

4.1L 250" ENG.

10

NOTE: O.E. CLUTCH DISC MAY BE 10-1/2" Pressure Plate : CF360030 CFT360030 Disc : 280490 280490 PP & Disc : -

DF490030

-

-

DF281226 DF700000

-

-

1-1/16"-10 # Clutch Pattern

N1439 52010 -

8 CYLINDER 1969. Pressure Plate : Disc : PP & Disc :

6.4L 390" ENG. CF260000 280700 -

1969. - 1970. Pressure Plate : Disc : PP & Disc :

5.8L 351" ENG. CF260000 280700 -

1969. - 1973.

11 CFT260000 280700 -

DF281226 DF700000

-

-

5.0L 302" ENG. 3 SPD

NOTE: O.E. CLUTCH DISC MAY BE 10-1/2" Pressure Plate : CF360030 CFT360030 Disc : 280490 280490 PP & Disc : 1969. - 1974

#5 Clutch Pattern

11 CFT260000 280700 -

-

-

5.0L 302", 5.8L 351" & 6.4L 390" ENG -

#4 Clutch Pattern

-

N1439 52010 N1439 52010 -

1-1/16"-10 -

11

NOTE: INCLUDES COBRA JET, w/26 SPLINE AFTERMARKET TRANS. Pressure Plate : CFT260000 Disc : 388144 DF388144 PP & Disc : DF148000

1-1/16"-10 #5 Clutch Pattern

10 DF490030

1-1/16"-10 -

N1439 52010 -

1-1/8"-26 #5 Clutch Pattern

N1439 50048 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

107

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Dual Friction DF Disc DF PP & Disc

Counterbalance T.O.B. Align Tool Pilot Bearing

MERCURY MONTEGO - Continued 8 CYLINDER

1972. - 1974. Pressure Plate : Disc : PP & Disc :

5.8L 351" CJ ENG. CF260000 CFT260000 280700 280700 -

1974. Pressure Plate : Disc : PP & Disc :

5.0L 302" ENG. 3 SPD CF260000 CFT260000 280700 280700 -

11 DF281226 DF700000

-

-

#5 Clutch Pattern

11 DF281226 DF700000

-

-

DF142142

*

-

-

DF988988

*

-

-

1991. - 1996. Pressure Plate : Disc : PP & Disc :

1.8L 112" ENG. DOHC CF360503 280003 -

DF003503

11003503 23543056 01003503

-

1991. - 1996. Pressure Plate : Disc : PP & Disc :

1.9L 116" ENG. SOHC CF360504 * 280004 -

1997. - 1999. Pressure Plate : Disc : PP & Disc :

2.0L 120" ENG. DOHC -

1-1/16"-10 -

-

1-1/16"-10 #5 Clutch Pattern

N1439 52010 N1439 52010 -

MYSTIQUE 4 CYLINDER 1995. - 2000. Pressure Plate : Disc : PP & Disc :

2.0L -

-

9-7/16 -

1"-23 # Clutch Pattern

52008 -

6 CYLINDER 1995. - 2000. Pressure Plate : Disc : PP & Disc :

2.5L -

-

9-7/16

1"-23 # Clutch Pattern

52008 -

TOPAZ 4 CYLINDER 8-1/2

# Clutch Pattern

7-7/8 DF004504

-

*

225

DF007507

*

-

*

-

-

7/8"-20 # Clutch Pattern

8-7/8

-

15/16"-22 -

15/16"-22 # Clutch Pattern

091 453 52012 N1710 50005 -

ZEPHYR 4 CYLINDER 1978. - 1983. Pressure Plate : Disc : PP & Disc :

2.3L 140" ENG. CF360024 * 281203 -

8-1/2 -

DF203024

1"-23 # Clutch Pattern

N1705 52008 -

8 CYLINDER 1978.

5.0L 302" ENG.

10

NOTE: O.E. CLUTCH DISC MAY BE 10-1/2" Pressure Plate : CF360030 CFT360030 Disc : 280490 280490 PP & Disc : 1979. Pressure Plate : Disc : PP & Disc :

5.0L 302" ENG. CF360025 280490 -

DF490030

-

-

#4 Clutch Pattern

10 CFT360025 280490 -

DF490025

-

DF536010

11010635 23536010 01536010

1-1/16"-10

-

1-1/16"-10 #4 Clutch Pattern

N1714 52010 N1714 52010 -

MITSUBISHI 3000GT 1990. - 2000. Pressure Plate : Disc : PP & Disc :

3.0L 3000 FWD 6G72 ENG. CF010536 *

225

*

* *

8-7/8 -

7/8"-20 # Clutch Pattern

210 50080 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

108

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Dual Friction DF Disc DF PP & Disc

Counterbalance T.O.B. Align Tool Pilot Bearing

MITSUBISHI 3000GT - Continued

1990. - 2000. Pressure Plate : Disc : PP & Disc :

3.0L TURBO VR-4 4WD 6G72 ENG. -

250 DF945520

*

11945520 23945520 01945520

* *

9-3/4 -

1"-23 # Clutch Pattern

592 52008 -

CORDIA 1982.06 - 1989. Pressure Plate : Disc : PP & Disc :

1.8L CORDIA TURBO G62B ENG. CF006518 CFT518006

200

1983.03 - 1989. Pressure Plate : Disc : PP & Disc :

2.0L CORDIA NON-TURBO G63B ENG. CF006518 CFT518006 DF518006

DF518006

-

7-7/8 -

200 -

7/8"-20 # Clutch Pattern

7-7/8 -

7/8"-20 # Clutch Pattern

210 50020 210 50020 -

ECLIPSE, ECLIPSE SPIDER 1989. - 1994. Pressure Plate : Disc : PP & Disc :

1.8L ECLIPSE 4G37 ENG. CF006518 CFT518006

1989. - 1994. Pressure Plate : Disc : PP & Disc :

2.0L ECLIPSE 2WD NON-TURBO 4G63 ENG CF012516 DF516012 *

1989. - 1999.

-

-

*

-

*

DF536010

*

11010635 23536010 01536010

2.0L ECLIPSE 2WD NON-TURBO

1997. - 1998.

2.4L ECLIPSE & ECLIPSE SPIDER CF010536 *

*

-

-

# Clutch Pattern

-

DF536010

*

11010635 23536010 01536010

2.0L ECLIPSE SPIDER NON-TURBO

* *

# Clutch Pattern

-

-

3.0L ECLIPSE GT 6G72 V6 ENG.

9 -

236

NOTE: O.E. DISC MAY BE 8-7/8" DIA. PULL-TYPE CLUTCH Pressure Plate : Disc : PP & Disc : CFT030101 * DF030101

*

-

*

-

7/8"-20 # Clutch Pattern

230

# Clutch Pattern

-

210 50020 -

4166 210 50020 -

15/16"-17 -

9-1/4

210 50020 -

15/16"-17 -

8-7/8

210 50020 -

7/8"-20 -

9

225

7/8"-20 # Clutch Pattern

8-7/8

230

NOTE: MODULAR CLUTCH - INCLUDES FLYWHEEL Pressure Plate : Disc : PP & Disc : DF325417 1999.04 - 2005.

-

*

7/8"-20 # Clutch Pattern

8-19/32

225

NOTE: MODULAR CLUTCH - INCLUDES FLYWHEEL Pressure Plate : Disc : PP & Disc : DF325417 1996. - 2005. Pressure Plate : Disc : PP & Disc :

7-7/8 -

215

2.0L ECLIPSE & ECLIPSE SPIDER

NOTE: w/TURBO ENG. Pressure Plate : Disc : PP & Disc : CF010536 1995. - 1999.

200 DF518006

4166 -

1"-23 # Clutch Pattern

INCLUDED INCLUDED -

EXPO 1992. - 1996. Pressure Plate : Disc : PP & Disc :

1.8L EXPO 2WD & 4WD CF012516 *

1992. - 1996. Pressure Plate : Disc : PP & Disc :

2.4L EXPO 2 & 4 WD CF010536 *

215 DF516012

8-19/32 -

225 -

DF536010

*

11010635 23536010 01536010

* *

7/8"-20 # Clutch Pattern

8-7/8 -

7/8"-20 # Clutch Pattern

210 50020 210 50020 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

109

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Dual Friction DF Disc DF PP & Disc

Counterbalance T.O.B. Align Tool Pilot Bearing

MITSUBISHI GALANT

1989. - 1991. Pressure Plate : Disc : PP & Disc :

2.0L GALANT DOHC 4WD. NON-TURBO CF012516 DF516012 *

1990.06 - 1993. Pressure Plate : Disc : PP & Disc :

2.0L GALANT TURBO VR-4 4WD CF010536 *

1991.06 - 1993. Pressure Plate : Disc : PP & Disc :

2.0L GALANT DOHC ENG. NON-TURBO CF010536 DF536010 *

1994. - 1997. Pressure Plate : Disc : PP & Disc :

2.4L GALANT CF010536 *

1995. - 1997. Pressure Plate : Disc : PP & Disc :

2.5L GALANT V-6 ENG. CF010536 *

215 -

*

8-19/32 -

225 DF536010

*

11010635 23536010 01536010

* *

*

11010635 23536010 01536010

* *

-

DF536010

*

11010635 23536010 01536010

*

-

*

DF536010

*

11010635 23536010 01536010

*

11010635 23536010 01536010

* *

7/8"-20 # Clutch Pattern

8-7/8 -

225

7/8"-20 # Clutch Pattern

8-7/8

225 -

# Clutch Pattern

8-7/8

225

7/8"-20 -

7/8"-20 # Clutch Pattern

8-7/8 -

7/8"-20 # Clutch Pattern

210 50020 210 50020 210 50020 210 50020 210 50020 -

GALANT SIGMA 1986.06 - 1987. Pressure Plate : Disc : PP & Disc :

2.4L SIGMA G64B ENG. CF010536 *

225

1988. - 1990. Pressure Plate : Disc : PP & Disc :

3.0L SIGMA 6G72 ENG. CF010536 *

DF536010

2.0L ENG. SOHC CF459620 *

DF620459

DF536010

* *

8-7/8 -

225

*

11010635 23536010 01536010

*

-

* *

7/8"-20 # Clutch Pattern

8-7/8 -

7/8"-20 # Clutch Pattern

210 50020 210 50020 -

LANCER 2002. - 2006. Pressure Plate : Disc : PP & Disc : 2003. - 2006.

215 -

2.0L ENG. EVOLUTION VII, VIII & IX

NOTE: INCLUDES MR & RS PULL-TYPE CLUTCH Pressure Plate : Disc : PP & Disc : -

8-1/2 -

240 DF188801

-

*

7/8"-20 # Clutch Pattern

9-7/16 -

1"-23 700920 #26 Clutch Pattern

0 IN/OZ INCLUDED INCLUDED -

MIRAGE 1984.05 - 1988.03 1.5L MIRAGE 4 SPD. ONLY G15B ENG. Pressure Plate : Disc : PP & Disc : CF006518 CFT518006 DF518006 1984.07 - 1988.03 1.6L MIRAGE TURBO G32B ENG. Pressure Plate : Disc : PP & Disc : CF006518 CFT518006 1988.04 - 1989.05 1.6L MIRAGE TURBO Pressure Plate : Disc : PP & Disc : CF012516 * 1988.04 - 1996. Pressure Plate : Disc : PP & Disc :

4G61 ENG. -

1.5L MIRAGE 5 SPD G15B ENG. CF006518 CFT518006

200 -

7-7/8 -

200 DF518006

-

DF516012

-

-

*

-

7/8"-20 # Clutch Pattern

8-19/32 -

200 DF518006

# Clutch Pattern

7-7/8

215

7/8"-20 -

7/8"-20 # Clutch Pattern

7-7/8 -

7/8"-20 # Clutch Pattern

210 50020 210 50020 210 50020 210 50020 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

110

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Dual Friction DF Disc DF PP & Disc

Counterbalance T.O.B. Align Tool Pilot Bearing

MITSUBISHI MIRAGE - Continued

1990. - 1993. Pressure Plate : Disc : PP & Disc :

1.6L MIRAGE TWIN CAM CF006518 CFT518006

1993. - 2002. Pressure Plate : Disc : PP & Disc :

1.8L MIRAGE CF012516 *

1998. - 2002. Pressure Plate : Disc : PP & Disc :

1.5L MIRAGE CF006518

200 DF518006

-

7-7/8 -

215 -

DF516012

-

*

CFT518006

DF518006

-

1.5L PRECIS 3 DR CF006518 CFT518006

DF518006

-

# Clutch Pattern

8-19/32 -

200

7/8"-20 7/8"-20 # Clutch Pattern

7-7/8 -

7/8"-20 # Clutch Pattern

210 50020 210 50020 210 50020 -

PRECIS 1989.07 - 1993. Pressure Plate : Disc : PP & Disc :

200

7-7/8 -

7/8"-20 # Clutch Pattern

210 50020 -

STARION 1982.10 - 1987.05

2.6L STARION G54B ENG.

NOTE: NON-TURBO & TURBO w/o INTERCOOLER Pressure Plate : Disc : PP & Disc : CF004515 CFT515004 1985.05 - 1987.05

DF515004

11515004 23515004 01515004

2.6L STARION G54B ENG.

NOTE: TURBO w/ INTERCOOLER Pressure Plate : Disc : PP & Disc : CF004515 CFT515004 1987.06 - 1990.

225 225 DF515004

11515004 23515004 01515004

2.6L STARION G54B ENG.

NOTE: TURBO & NON TURBO Pressure Plate : Disc : PP & Disc : CF033537 CFT537033

8-7/8

DF537033

11500300 23544020 01500300

DF518006

-

# Clutch Pattern

8-7/8 -

240

1"-23

1"-23 # Clutch Pattern

9-7/16 -

550 52008 -

422 52008 -

1"-23 # Clutch Pattern

422 52008 -

TREDIA 1982.06 - 1990. Pressure Plate : Disc : PP & Disc :

1.8L TREDIA TURBO G62B ENG. CF006518 CFT518006

200

1983.03 - 1990. Pressure Plate : Disc : PP & Disc :

2.0L TREDIA NON-TURBO G63B ENG. CF006518 CFT518006 DF518006

7-7/8 -

200 -

7/8"-20 # Clutch Pattern

7-7/8 -

7/8"-20 # Clutch Pattern

210 50020 210 50020 -

MITSUBISHI LIGHT TRUCK, SUV & VAN MONTERO, MONTERO SPORT 1983.01 - 1986.04 2.6L MONTERO G54B ENG. Pressure Plate : Disc : PP & Disc : CF780581 CFT581780 1986.05 - 1990. Pressure Plate : Disc : PP & Disc :

2.6L MONTERO G54B ENG. CF780581 CFT581780

1989. - 2001. Pressure Plate : Disc : PP & Disc :

3.0L MONTERO V-6 ENG. CF034538 -

225 DF581780

11515004 23515004 01515004

8-7/8 -

225 DF581780

11515004 23515004 01515004

DF538034

-

# Clutch Pattern

8-7/8 -

240

1"-23 1"-23 # Clutch Pattern

9-7/16 -

1-3/16"-14 # Clutch Pattern

550 52008 422 52008 440 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

111

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Dual Friction DF Disc DF PP & Disc

Counterbalance T.O.B. Align Tool Pilot Bearing

MITSUBISHI LIGHT TRUCK, SUV & VAN MONTERO, MONTERO SPORT - Continued

1997. - 1999. Pressure Plate : Disc : PP & Disc :

2.4L MONTERO CF780581 CFT581780

225 DF581780

11515004 23515004 01515004

DF581780

11515004 23515004 01515004

8-7/8 -

1"-23 # Clutch Pattern

52008 -

PICK UPS 1982.10 - 1985. Pressure Plate : Disc : PP & Disc :

2.3L 2300 4WD TURBO DIESEL CF780581 CFT581780

1982.10 - 1990. Pressure Plate : Disc : PP & Disc :

2.0L 2000 2 & 4WD G63B ENG. CFT510001

225

8-7/8 -

215 DF510001

-

1982.10 - 1990. Pressure Plate : Disc : PP & Disc :

2.6L 2600 2 & 4WD CF780581 CFT581780

DF581780

11515004 23515004 01515004

1990. - 1996. Pressure Plate : Disc : PP & Disc :

2.4L 2400 2 & 4WD 4G64 ENG. CF780581 CFT581780

DF581780

11515004 23515004 01515004

1991. - 1995. Pressure Plate : Disc : PP & Disc :

3.0L 3000 V6 6G72 ENG. CF034538 -

-

-

DF511276

-

1"-23 # Clutch Pattern

8-7/8 -

240

1"-23 # Clutch Pattern

8-7/8

225

DF538034

# Clutch Pattern

8-19/32

225

1"-23 -

1"-23 # Clutch Pattern

9-7/16 -

1-3/16"-14 # Clutch Pattern

550 52008 550 52008 550 52008 550 52008 440 -

NISSAN-DATSUN 200SX 1977.01 - 1981.06 Pressure Plate : Disc : PP & Disc :

2.0L 200SX L20B, Z20 ENG. -

1981.07 - 1983.09 2.2L 200SX Z21 ENG. Pressure Plate : Disc : PP & Disc : CF402583 CFT583402 1983.01 - 1988. Pressure Plate : Disc : PP & Disc :

2.0L 200SX NON-TURBO CA20 ENG. -

1984. - 1986. Pressure Plate : Disc : PP & Disc :

1.8L 200SX TURBO CA18T ENG. CFT533277

1986.07 - 1988. Pressure Plate : Disc : PP & Disc :

3.0L 200SX V-6 ENG. VG30 ENG. CF007534 CFT534007

1995. - 1998. Pressure Plate : Disc : PP & Disc :

1.6L 200SX GA16DE ENG. -

1995. - 1998. Pressure Plate : Disc : PP & Disc :

2.0L 200SX SE-R SR20DE ENG. -

200

7-7/8 -

225 DF583402

11583402 23583402 01583402

DF532277

-

-

-

-

DF534007

-

11534007 23534007 01534007

DF541042

-

-

*

DF914812

*

11914812 23914812 01914812

-

* *

1"-24 # Clutch Pattern

7-1/2

215

1"-24 # Clutch Pattern

9-7/16

190

1"-24 # Clutch Pattern

8-7/8

240

1"-24 # Clutch Pattern

8-7/8

225 DF533277

# Clutch Pattern

8-7/8

225

1"-24 -

13/16"-18 # Clutch Pattern

8-1/2 -

13/16"-18 # Clutch Pattern

016 50001 016 50001 016 50001 016 50001 016 50001 433 50002 433 50002 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

112

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Dual Friction DF Disc DF PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Counterbalance T.O.B. Align Tool Pilot Bearing

NISSAN-DATSUN 210

1974. - 1982.08 Pressure Plate : Disc : PP & Disc :

1.4L 210 A14 ENG. CF420507

1978.02 - 1982.08 1.5L 210 A15 ENG. Pressure Plate : Disc : PP & Disc : CF420507

180 -

-

-

7-1/16 -

180 -

-

-

13/16"-18 # Clutch Pattern

7-1/16 -

13/16"-18 # Clutch Pattern

016 50002 016 50002 -

240 1969.10 - 1973.07

2.4L 240Z L24 ENG.

225

NOTE: REQUIRES CENTERFORCE T.O. BEARING PART NO.1602 Pressure Plate : Disc : PP & Disc : CF402583 CFT583402 DF583402 1988.07 - 1990.07 2.4L 240SX SOHC KA24E ENG. Pressure Plate : Disc : PP & Disc : CF402583 CFT583402 1991. - 1995. Pressure Plate : Disc : PP & Disc :

2.4L 240SX DOHC KA24D ENG. CF402583 CFT583402

1996. - 1998. Pressure Plate : Disc : PP & Disc :

2.4L 240SX DOHC KA24DE CF402583 CFT583402

11583402 23583402 01583402

8-7/8 -

225 DF583402

11583402 23583402 01583402

DF583402

# Clutch Pattern

-

11583402 23583402 01583402

-

11583402 23583402 01583402

1"-24 # Clutch Pattern

8-7/8

225 DF583402

8-7/8

225

1"-24

1"-24 # Clutch Pattern

8-7/8 -

1"-24 # Clutch Pattern

1602 50001 016 50001 591 50001 016 50001 -

260 1973.08 - 1974.11

2.6L 260Z & 260Z 2+2 L26 ENG.

225

NOTE: REQUIRES CENTERFORCE T.O. BEARING PART NO.1602 Pressure Plate : Disc : PP & Disc : CF402583 CFT583402 DF583402

11583402 23583402 01583402

8-7/8 -

1"-24 # Clutch Pattern

1602 50001 -

280 1974.11 - 1978.05 2.8L 280Z 2+2 L28 ENG. Pressure Plate : Disc : PP & Disc : CF279582 CFT582279 1974.12 - 1978.05 2.8L 280Z (2 SEATER) L28 ENG. Pressure Plate : Disc : PP & Disc : CF402583 CFT583402 1978.06 - 1983.06 2.8L 280ZX (2 SEATER) L28E ENG. Pressure Plate : Disc : PP & Disc : CF402583 CFT583402 1978.06 - 1983.06 2.8L 280ZX 2+2 L28E Pressure Plate : Disc : PP & Disc : CF279582 CFT582279 1981. - 1983.06 Pressure Plate : Disc : PP & Disc :

2.8L 280ZX TURBO L28ET ENG. CF007534 CFT534007

240 DF582279

11534007 23534007 01534007

9-7/16 -

225 DF583402

11583402 23583402 01583402

DF583402

-

11583402 23583402 01583402

-

11534007 23534007 01534007

DF534007

11534007 23534007 01534007

DF534007

11534007 23534007 01534007

1"-24 # Clutch Pattern

9-7/16 -

240

1"-24 # Clutch Pattern

8-7/8

240 DF582279

# Clutch Pattern

8-7/8

225

1"-24 -

1"-24 # Clutch Pattern

9-7/16 -

1"-24 # Clutch Pattern

016 50001 016 50001 016 50001 016 50001 016 50001 -

300 1983.07 - 1986.05 2960cc, 300ZX TURBO VG30T ENG. Pressure Plate : Disc : PP & Disc : CF007534 CFT534007

240

9-7/16 -

1"-24 # Clutch Pattern

016 50001 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

113

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Dual Friction DF Disc DF PP & Disc

Counterbalance T.O.B. Align Tool Pilot Bearing

NISSAN-DATSUN 300 - Continued

1983.07 - 1989.07 3.0L 300ZX NON-TURBO VG30 ENG. Pressure Plate : Disc : PP & Disc : CF007534 CFT534007 1986.06 - 1989.07 3.0L 300ZX TURBO VG30T ENG. Pressure Plate : Disc : PP & Disc : CF500500 CFT500500

240 DF534007

11534007 23534007 01534007

9-7/16 -

250 DF500500

1989.07 - 1996. Pressure Plate : Disc : PP & Disc :

3.0L 300ZX TWIN TURBO VG30DETT ENG. DF502502

1989.08 - 1996. Pressure Plate : Disc : PP & Disc :

3.0L 300ZX NON-TURBO VG30DE ENG. CF007534 CFT534007 DF534007

11500500 23500500 01500500

# Clutch Pattern

9-7/16 -

250 11502502 23500500 01502502

-

11534007 23534007 01534007

1"-24 # Clutch Pattern

9-3/4

240

1"-24 -

1"-24 # Clutch Pattern

9-7/16 -

1"-24 # Clutch Pattern

016 50001 016 50001 591 50001 591 50001 -

350Z 2003. - 2006.

3.5L ENG. 6SPD

250

NOTE: SPRUNG DISC HUB, W/DMF Pressure Plate : Disc : PP & Disc : -

DF633140

-

*

9-3/4 -

1"-24 # Clutch Pattern

50001 -

510 1967.10 - 1973.09 1.6L 510 L16 ENG. Pressure Plate : Disc : PP & Disc : CF276506 1978.07 - 1981.09 Pressure Plate : Disc : PP & Disc :

200 -

2.0L 510 L20B, Z205 ENG. -

DF506276

-

7-7/8 -

200 DF511276

-

1972.08 - 1973.07 1.8L 610 (INCLUDING WAGON) L18 ENG. Pressure Plate : Disc : PP & Disc : CF276506 DF506276

-

1"-24 # Clutch Pattern

7-7/8 -

1"-24 # Clutch Pattern

50001 016 50001 -

610

1973.08 - 1976.10 Pressure Plate : Disc : PP & Disc :

200

2.0L 610 (INCLUDING WAGON) L20B ENG. DF511276

-

1973.08 - 1977. Pressure Plate : Disc : PP & Disc :

1.8L 710 L18 ENG. -

-

1974.09 - 1977.05 Pressure Plate : Disc : PP & Disc :

2.0L 710 L20B ENG. -

7-7/8 -

200

1"-24 # Clutch Pattern

7-7/8 -

1"-24 # Clutch Pattern

50001 016 50001 -

710 200 -

DF511276

7-7/8 -

200 -

DF511276

-

DF916035

11916035 23583402 01916035

1"-24 # Clutch Pattern

7-7/8 -

1"-24 # Clutch Pattern

016 50001 016 50001 -

ALTIMA 1993. - 2001. Pressure Plate : Disc : PP & Disc : 2002. - 2006.

2.4L ENG. KA24DE ENG. CF035916 *

225

*

2.5L ENG. DMF

NOTE: SOLID DISC HUB Pressure Plate : Disc : PP & Disc : -

* *

8-7/8 -

240 -

DF850850

-

*

1"-24 # Clutch Pattern

9-1/2 -

50001 -

1"-24 # Clutch Pattern

50001 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

114

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Dual Friction DF Disc DF PP & Disc

Counterbalance T.O.B. Align Tool Pilot Bearing

NISSAN-DATSUN ALTIMA - Continued

NEW! 2002. - 2006. 2.5L ENG. DMF NOTE: SPRUNG HUB HIGH TORQUE APPLICATION Pressure Plate : Disc : PP & Disc : DF633850 2002. - 2006.

250 -

*

3.5L ENG.

9-3/4 -

250

NOTE: SPRUNG DISC HUB, W/DMF Pressure Plate : Disc : PP & Disc : -

DF633140

-

*

1"-24 -

50001

# Clutch Pattern

9-3/4 -

1"-24 # Clutch Pattern

50001 -

B-210 1973.09 - 1974.08 1.3L B-210 Pressure Plate : Disc : PP & Disc : CF420507

180 -

1974.09 - 1978.01 1.4L B-210 4 SPD. A14 ENG. Pressure Plate : Disc : PP & Disc : CF420507 -

-

-

7-1/16 -

180 -

-

13/16"-18 # Clutch Pattern

7-1/16 -

13/16"-18 # Clutch Pattern

016 50002 016 50002 -

MAXIMA 1981.01 - 1984.06 2.8L 810 DIESEL (MAXIMA) LD28 ENG. Pressure Plate : Disc : PP & Disc : CF402583 CFT583402 DF583402 1986.01 - 1998. Pressure Plate : Disc : PP & Disc :

3.0L MAXIMA CF007901

1999. - 2001. Pressure Plate : Disc : PP & Disc :

3.0L MAXIMA V-6 CF279910

2002. - 2006.

225 11583402 23583402 01583402

8-7/8 -

240 -

DF901007

11901007 23901007 01901007

-

DF910279

-

11901007 23901007 01901007

3.5L ENG. DF633140

*

-

*

-

1"-24 # Clutch Pattern

9-7/16 -

250

NOTE: SPRUNG DISC HUB, W/DMF Pressure Plate : Disc : PP & Disc : -

# Clutch Pattern

9-7/16

240

1"-24 -

1"-24 # Clutch Pattern

9-3/4 -

016 50001 809 50001 809 50001 -

1"-24 # Clutch Pattern

50001 -

NX COUPE 1991. - 1993. Pressure Plate : Disc : PP & Disc :

1.6L NX COUPE GA16DE ENG. -

1991. - 1993. Pressure Plate : Disc : PP & Disc :

2.0L NX COUPE SR20DE ENG. -

190 DF541042

7-1/2 -

215 DF914812

*

11914812 23914812 01914812

* *

13/16"-18 # Clutch Pattern

8-1/2 -

13/16"-18 # Clutch Pattern

433 50021 433 50068 -

PATROL 1979. - EOP.

4.0L PATROL P40 ENG.

NOTE: (EXPORT ONLY) Pressure Plate : Disc : PP & Disc : -

275

-

DF518732

-

-

DF541042

-

10-13/16 -

1"-24 # Clutch Pattern

016 50001 -

PULSAR 1986.09 - 1988. Pressure Plate : Disc : PP & Disc :

1.6L PULSAR. -

190

*

7-1/2 -

13/16"-18 # Clutch Pattern

433 50021 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

115

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Dual Friction DF Disc DF PP & Disc

Counterbalance T.O.B. Align Tool Pilot Bearing

NISSAN-DATSUN PULSAR - Continued

1989. - 1990. Pressure Plate : Disc : PP & Disc :

1.6L PULSAR SOHC GA1 ENG. -

DF541042

190

1986.07 - 1990.07 Pressure Plate : Disc : PP & Disc :

1.6L SENTRA 2WD E16 ENG. -

DF541042

1990.08 - 1992. Pressure Plate : Disc : PP & Disc :

1.6L SENTRA GA16DE ENG. -

1991. - 2001. Pressure Plate : Disc : PP & Disc :

2.0L SENTRA SE-R SR20DE ENG. -

DF914812

1993. - 1999. Pressure Plate : Disc : PP & Disc :

1.6L SENTRA GA16DE ENG. -

DF541042

2000. - 2006. Pressure Plate : Disc : PP & Disc :

1.8L SENTRA -

*

-

*

-

7-1/2 -

13/16"-18 # Clutch Pattern

433 50021 -

SENTRA 190

190 DF541042

-

*

*

11914812 23914812 01914812

*

-

*

-

-

DF914812

*

11914812 23914812 01914812

*

7-1/2

*

-

*

-

-

DF850850

*

-

*

-

*

-

13/16"-18 # Clutch Pattern

9-3/4 -

240

13/16"-18 # Clutch Pattern

8-1/2

250

13/16"-18 # Clutch Pattern

215

13/16"-18 # Clutch Pattern

8-1/2

190

2.5L SPEC-V 6SPD, DMF

NOTE: SOLID DISC HUB Pressure Plate : Disc : PP & Disc : -

-

*

13/16"-18 # Clutch Pattern

7-1/2

215

NEW! 2002. - 2006. 2.5L SPEC-V 6SPD NOTE: SPRUNG HUB HIGH TORQUE APPLICATION Pressure Plate : Disc : PP & Disc : DF633850 2002. - 2006.

7-1/2 -

# Clutch Pattern

-

433 50021 433 50068 433 433 -

1"-24 -

9-1/2

433 50021 -

50001 -

1"-24 # Clutch Pattern

50001 -

STANZA 1989.07 - 1992. Pressure Plate : Disc : PP & Disc :

2.4L STANZA KA24 ENG. CF035547 CFT547035 *

225

*

DF547035

8-7/8 -

1"-24 # Clutch Pattern

816 50001 -

NISSAN-DATSUN LIGHT TRUCK, SUV & VAN AXXESS 1989. - 1993. Pressure Plate : Disc : PP & Disc :

2.4L AXXESS 2WD. ONLY CF035547 CFT547035 *

1989. - 1993. Pressure Plate : Disc : PP & Disc :

2.4L AXXESS 4WD. ONLY CFT527007

225

*

DF547035

8-7/8 -

240 DF527007

-

DF582279

11534007 23534007 01534007

1"-24 # Clutch Pattern

9-7/16 -

1"-24 # Clutch Pattern

816 50001 809 50001 -

PATHFINDER 1986.07 - 1995. Pressure Plate : Disc : PP & Disc :

2.4L PATHFINDER Z24 ENG. CF279582 CFT582279

240

9-7/16 -

1"-24 # Clutch Pattern

016 50001 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

116

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Dual Friction DF Disc DF PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Counterbalance T.O.B. Align Tool Pilot Bearing

NISSAN-DATSUN LIGHT TRUCK, SUV & VAN PATHFINDER - Continued

1986.07 - 1996. Pressure Plate : Disc : PP & Disc :

3.0L & 3.3L PATHFINDER V-6 VG30/33 ENG CF500500 CFT500500 DF500500

1996. - 2002. Pressure Plate : Disc : PP & Disc :

3.3L PATHFINDER CF053912 CFT912053

250 11500500 23500500 01500500

9-3/4 -

250 DF912053

11912053 23500500 01912053

DF506276

-

1"-24 # Clutch Pattern

9-3/4 -

1"-24 # Clutch Pattern

016 50001 50001 -

PICK UPS, FRONTIER 1969.07 - 1972.08 1.6L 521 L16 ENG. Pressure Plate : Disc : PP & Disc : CF276506

200 -

1972.09 - 1973.09 1.6L 620 Pressure Plate : Disc : PP & Disc : CF276506

-

DF506276

-

1973.10 - 1974.08 1.8L 620 L18 ENG. Pressure Plate : Disc : PP & Disc : CF277512

-

-

-

1974.09 - 1979.05 2.0L 620 Pressure Plate : Disc : PP & Disc : CF402583

200 -

CFT583402

1980.07 - 1982.10 2.2L 720 & 4WD Pressure Plate : Disc : PP & Disc : CF402583 CFT583402 1980.10 - 1985.11 2.2L 720 DIESEL Pressure Plate : Disc : PP & Disc : CF402583 CFT583402 1982.11 - 1986.05 2.0L NISSAN TRUCK Pressure Plate : Disc : PP & Disc : CF279582 CFT582279 1982.11 - 1998. Pressure Plate : Disc : PP & Disc :

2.4L NISSAN 2WD & 4WD CF279582 CFT582279

1985.11 - 1997. Pressure Plate : Disc : PP & Disc :

3.0L V6 NISSAN 2WD & 4WD CF500500 CFT500500

1997. - 1999. Pressure Plate : Disc : PP & Disc :

2.4L FRONTIER 2WD & 4WD CF279582 CFT582279

DF583402

11583402 23583402 01583402

8-7/8

DF583402 DF583402

-

11583402 23583402 01583402

DF583402

-

11583402 23583402 01583402

DF582279

-

11534007 23534007 01534007

DF582279

-

11534007 23534007 01534007

DF500500

-

11500500 23500500 01500500

DF582279

-

11534007 23534007 01534007

DF912053

11912053 23500500 01912053

1"-24 # Clutch Pattern

9-7/16 -

250

1"-24 # Clutch Pattern

9-3/4

240

1"-24 # Clutch Pattern

9-7/16

250

1"-24 # Clutch Pattern

9-7/16

240

1"-24 # Clutch Pattern

8-7/8

240

1"-24 # Clutch Pattern

8-7/8

225

1"-24 # Clutch Pattern

8-7/8

225

3.3L ENG. FRONTIER

NOTE: NON-SUPERCHARGED Pressure Plate : Disc : PP & Disc : CF053912 CFT912053

-

11583402 23583402 01583402

1"-24 # Clutch Pattern

8-7/8

225

1"-24 # Clutch Pattern

225

1"-24 # Clutch Pattern

7-7/8

225

1979.06 - 1980.06 2.0L 720 & 4WD Pressure Plate : Disc : PP & Disc : CF402583 CFT583402

1999.04 - 2004.

7-7/8 -

1"-24 # Clutch Pattern

9-3/4 -

50001 50001 50001 016 50001 016 50001 016 50001 016 50001 016 50001 016 50001 016 50001 016 50001 -

1"-24 # Clutch Pattern

50001 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

117

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Dual Friction DF Disc DF PP & Disc

Counterbalance T.O.B. Align Tool Pilot Bearing

NISSAN-DATSUN LIGHT TRUCK, SUV & VAN PICK UPS, FRONTIER - Continued

2000. - 2004. Pressure Plate : Disc : PP & Disc :

2.4L FRONTIER 2WD & 4WD CFT527007

240 DF527007

3.3L VG33ER ENG, FRONTIER NEW! 2004. NOTE: SUPERCHARGED Pressure Plate : Disc : PP & Disc : CFT633500 * 2005. - 2009. 4.0L ENG. FRONTIER Pressure Plate : Disc : PP & Disc : CFT150651 *

-

9-7/16 -

250 DF633500

-

*

DF150651

-

-

*

# Clutch Pattern

9-3/4"

260

1"-24 1"-24 # Clutch Pattern

10.4" -

591 50001 -

1"-24 # Clutch Pattern

50001 INCLUDED INCLUDED INCLUDED

QUEST, VAN 1987. - 1990. Pressure Plate : Disc : PP & Disc :

2.4L ENG. CF402583

225 CFT583402

DF583402

11583402 23583402 01583402

DF912053

11912053 23500500 01912053

8-7/8 -

1"-24 # Clutch Pattern

016 50001 -

XTERRA 1999. - 2004. Pressure Plate : Disc : PP & Disc : 2000. - 2004. Pressure Plate : Disc : PP & Disc :

3.3L ENG. NON-SUPERCHARGED CF053912 CFT912053 2.4L ENG. -

4.0L ENG -

9-3/4 -

240 CFT527007

NEW! 2000. - 2004. 3.3L VG33ER ENG NOTE: SUPERCHARGED Pressure Plate : Disc : PP & Disc : CFT633500 2005. - 2009. Pressure Plate : Disc : PP & Disc :

250

DF527007

-

*

DF633500

-

-

*

*

DF150651

-

-

*

1"-24 # Clutch Pattern

9-3/4"

260 CFT150651

# Clutch Pattern

9-7/16

250

1"-24 -

# Clutch Pattern

-

591 50001 -

1"-24 -

10.4"

50001 -

1"-24 # Clutch Pattern

50001 INCLUDED INCLUDED INCLUDED

OLDSMOBILE ACHIEVA 4 CYLINDER 1992. - 1994.

2.3L 140" QUAD ENG.

NOTE: w/ EXTERNAL SLAVE Pressure Plate : Disc : PP & Disc : MS361914 * 1995. Pressure Plate : Disc : PP & Disc :

2.3L 140" ENG. CF360074 * 381042 -

1996. - 1999. Pressure Plate : Disc : PP & Disc :

2.4L 146" ENG. CF360074 * 381042 -

9-1/8 -

DF201914

*

11201914 23201914 01201914

* *

-

# Clutch Pattern

9 -

DF201074

-

*

-

DF201074

-

*

1"-14 # Clutch Pattern

9 -

1"-14

-

1"-14 # Clutch Pattern

N1747 53014 53014 53014 -

ALERO 4 CYLINDER 2000. - 2001.

2.4L 146" ENG. 5 SPD.

NOTE: INCLUDES SLAVE CYLINDER Pressure Plate : Disc : PP & Disc : CF008514 *

9-1/8 DF140833

-

*

-

1"-14 # Clutch Pattern

INCLUDED INCLUDED -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

118

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Dual Friction DF Disc DF PP & Disc

Counterbalance T.O.B. Align Tool Pilot Bearing

OLDSMOBILE ALERO - Continued 4 CYLINDER 2002. - 2004.

2.2L 134" ENG. DOHC

NOTE: VIN F Pressure Plate : Disc : PP & Disc : CF331156

*

9 -

DF561133

-

DF204910

*

-

-

*

-

-

1"-14 # Clutch Pattern

INCLUDED INCLUDED -

CALAIS 4 CYLINDER 1985. - 1991. Pressure Plate : Disc : PP & Disc :

2.5L 151" ENG. CF361910 * 384204 -

8-1/2

1988. - 1992. Pressure Plate : Disc : PP & Disc :

2.3L 140" QUAD 4 ENG. MS361914 *

# Clutch Pattern

9-1/8 DF201914

*

11201914 23201914 01201914

* *

1"-14 -

-

1"-14 # Clutch Pattern

N1744 53014 N1747 53014 -

CUTLASS-FROM 1977, OMEGA-FROM 1977 6 CYLINDER 1977. Pressure Plate : Disc : PP & Disc :

3.8L 231" ENG. RWD CF361874 CFT361874 383271 383271 -

1978. Pressure Plate : Disc : PP & Disc :

3.8L 231" ENG. RWD CF361874 CFT361874 383271 383271 -

1979. Pressure Plate : Disc : PP & Disc :

3.8L 231" ENG. RWD CF361675 CFT361675 383271 383271 -

NEW! 1980. - 1981. 3.8L 231" ENG. RWD Pressure Plate : CF361675 CFT361675 Disc : 383271 383271 PP & Disc : 1988. - 1989. Pressure Plate : Disc : PP & Disc :

2.8L 171" ENG. MS361914 *

10.4 DF383271 DF271874

-

-

#2 Clutch Pattern

10.4 DF383271 DF271874

-

DF383271 DF271675 DF383271 DF271675

-

DF201914

11361739 23383271 01271739 11361739 23383271 01271739

10.4 LM361675 LM383271 LM271675

*

11201914 23201914 01201914

* *

1-1/8"-10 700010 #2 Clutch Pattern

10.4 LM361675 LM383271 LM271675

9-1/8 -

1-1/8"-10 700010 -

-

1-1/8"-10 700010 #2 Clutch Pattern

1-1/8"-10 # Clutch Pattern

1"-14 # Clutch Pattern

34.4 IN/OZ N1178 53010 34.4 IN/OZ N1086 53010 34.4 IN/OZ N1716 53010 43001 N1716 53010 43001 N1747 53014 -

8 CYLINDER 1977. - 1978. Pressure Plate : Disc : PP & Disc :

5.0L 305" ENG. RWD CF361874 CFT361874 383271 383271 -

1977. - 1979. Pressure Plate : Disc : PP & Disc :

4.3L 260" ENG. RWD CF361874 CFT361874 383271 383271 -

1979. Pressure Plate : Disc : PP & Disc :

5.0L 305" ENG. RWD CF361675 CFT361675 383271 383271 -

10.4 DF383271 DF271874

-

-

# Clutch Pattern

10.4 DF383271 DF271874 DF383271 DF271675

11361739 23383271 01271739

1-1/8"-10 -

-

1-1/8"-10 # Clutch Pattern

10.4 LM361675 LM383271 LM271675

1-1/8"-10 # Clutch Pattern

N1086 53010 N1086 53010 N1716 53010 43001

CUTLASS-TO 1977, DELTA 88, OMEGA-TO 1977, STARFIRE-TO 1977, VISTA CRUISER, 442 6 CYLINDER 1964. - 1967. Pressure Plate : Disc : PP & Disc :

3.8L 225" ENG. CF361874 383271 -

10.4 CFT361874 383271 -

DF383271 DF271874

-

-

1-1/8"-10 # Clutch Pattern

N1086 53010 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

119

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Dual Friction DF Disc DF PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Counterbalance T.O.B. Align Tool Pilot Bearing

OLDSMOBILE CUTLASS-TO 1977, DELTA 88, OMEGA-TO 1977, STARFIRE-TO 1977, VISTA CRUISER, 442 - Continued 6 CYLINDER

1968. - 1976. Pressure Plate : Disc : PP & Disc :

4.1L 250" ENG. 3 SPD CF361874 CFT361874 383271 383271 -

1975. - 1976. Pressure Plate : Disc : PP & Disc :

3.8L 231" ENG. CF361874 383271 -

10.4 DF383271 DF271874

-

-

1-1/8"-10 # Clutch Pattern

10.4 -

1-1/8"-10 700010 -

N1086 53010 0 IN/OZ N1178 53010 -

CFT361874 383271 -

DF383271 DF271874

-

CFT361675 383271 -

DF383271 DF271675

11361739 23383271 01271739

10.4 LM361675 LM383271 LM271675

11165552 23383735 01735552

11 LM165552 LM383735 LM735552

11165552 23383735 01735552

11 LM165552 LM383735 LM735552

11165552 23383735 01735552

11 LM165552 LM383735 LM735552

11361739 23383271 01271739

10.4 LM361675 LM383271 LM271675

11165552 23383735 01735552

11 LM165552 LM383735 LM735552

11165552 23383735 01735552

11 LM165552 LM383735 LM735552

11361739 23383271 01271739

10.4 LM361675 LM383271 LM271675

#2 Clutch Pattern

23.4 IN/OZ N1716 53010 43001

10.4

1-1/8"-26

23.4 IN/OZ

#2 Clutch Pattern

8 CYLINDER 1965. - 1967. Pressure Plate : Disc : PP & Disc :

5.4L 330" ENG. CF361675 383271 -

1965. - 1967. Pressure Plate : Disc : PP & Disc :

5.4L 330" ENG. H.D. CF165552 CFT165552 383735 383735 -

1966. - 1967. Pressure Plate : Disc : PP & Disc :

6.6L 400" ENG. W30 CF165552 CFT165552 383735 383735 -

1966. - 1967. Pressure Plate : Disc : PP & Disc :

7.0L 425" ENG. CF165552 383735 -

1968. - 1970. Pressure Plate : Disc : PP & Disc :

5.7L 350" ENG. 3 SPD CF361675 CFT361675 383271 383271 -

CFT165552 383735 -

NEW! 1968. - 1970. 6.6L 400" ENG. W30 Pressure Plate : CF165552 CFT165552 Disc : 383735 383735 PP & Disc : 1968. - 1973. Pressure Plate : Disc : PP & Disc :

7.5L 455" ENG. 4 BBL 3 SPD. CF165552 CFT165552 383735 383735 -

1971. - 1973. Pressure Plate : Disc : PP & Disc :

5.7L 350" ENG. 2 & 4 BBL, 3 SPD. CF361675 CFT361675 383271 383271 -

1971. - 1973.

CFT361675 384161 -

DF383735 DF735552 DF383271 DF271675 DF383735 DF735552 DF383735 DF735552 DF383271 DF271675

DF384161 DF161675

11361739 23384161 01161739

LM361675 LM384161 LM161675

5.7L 350" ENG. W31 4 BBL, 4 SPD.

NOTE: 12" HEAVY DUTY UPGRADE Pressure Plate : Disc : PP & Disc : 1971. - 1973. Pressure Plate : Disc : PP & Disc :

DF383735 DF735552

5.7L 350" ENG. 2 & 4 BBL, w/4 SPD.

NOTE: (EXC. W31 ENG.) Pressure Plate : CF361675 Disc : 384161 PP & Disc : 1971. - 1973.

DF383735 DF735552

5.7L 350" ENG. W31 4BBL, 4 SPD. CF165552 CFT165552 384148 384148 -

DF384148 DF148552

11165552 23384148 01148552

#2 Clutch Pattern

1-1/8"-10 700510 #3 Clutch Pattern

1-1/8"-10 700510 #3 Clutch Pattern

1-1/8"-10 700510 #3 Clutch Pattern

1-1/8"-10 700500 #2 Clutch Pattern

1-1/8"-10 700500 #3 Clutch Pattern

1-1/8"-10 700500 #3 Clutch Pattern

1-1/8"-10 700500 -

700500 #2 Clutch Pattern

12 DF382612 DF612909

1-1/8"-10 700510 -

-

1-1/8"-26 700500 #3 Clutch Pattern

11 LM165552 LM384148 LM148552

1-1/8"-26 700500 #3 Clutch Pattern

23.4 IN/OZ N1716 53010 43002 23.4 IN/OZ N1716 53010 43002 23.4 IN/OZ N1716 53010 43002 23.4 IN/OZ N1716 53010 43002 23.4 IN/OZ N1716 53010 43001 23.4 IN/OZ N1716 53010 43002 23.4 IN/OZ N1716 53010 43002

N1716 53026 43001 23.4 IN/OZ N1716 53026 43001 23.4 IN/OZ N1716 53026 43001

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

120

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Dual Friction DF Disc DF PP & Disc

Counterbalance T.O.B. Align Tool Pilot Bearing

OLDSMOBILE CUTLASS-TO 1977, DELTA 88, OMEGA-TO 1977, STARFIRE-TO 1977, VISTA CRUISER, 442 - Continued 8 CYLINDER

1971. - 1973. Pressure Plate : Disc : PP & Disc :

7.5L 455" ENG. 4 BBL 4 SPD CF165552 CFT165552 384148 384148 -

1971. - 1973.

7.5L 455" ENG. 4 BBL 4 SPD.

NOTE: 12" HEAVY DUTY UPGRADE Pressure Plate : Disc : PP & Disc : 1975. - 1976. Pressure Plate : Disc : PP & Disc :

4.3L 260" ENG. 2 BBL 3 SPD CF361874 CFT361874 383271 383271 -

DF384148 DF148552

11165552 23384148 01148552

DF382612 DF612909

-

11 LM165552 LM384148 LM148552

#3 Clutch Pattern

23.4 IN/OZ N1716 53026 43002

12

1-1/8"-26

23.4 IN/OZ

-

700500 #3 Clutch Pattern

10.4 DF383271 DF271874

-

-

DF204910

-

-

1-1/8"-26 700500 -

1-1/8"-10 # Clutch Pattern

N1716 53026 43001 N1086 53010 -

FIRENZA 4 CYLINDER 1983. - 1985. Pressure Plate : Disc : PP & Disc :

2.0L 121" ENG. 5 SPD CF361910 * 384204 -

1987. Pressure Plate : Disc : PP & Disc :

2.0L 121" ENG. 4 SPD MS361914 *

1988. - 1989. Pressure Plate : Disc : PP & Disc :

2.0L 122" L ENG. CF361910 * 384204 -

8-1/2

*

# Clutch Pattern

9-1/8 DF201914

*

11201914 23201914 01201914

* *

-

DF204910

2.8L 171" ENG. 4 SPD MS361914 *

DF201914

*

-

*

11201914 23201914 01201914

1"-14 # Clutch Pattern

8-1/2 -

1"-14 -

-

1"-14 # Clutch Pattern

N1744 53014 N1725 53014 N1744 53014 -

6 CYLINDER 1985. - 1986. Pressure Plate : Disc : PP & Disc :

9-1/8

* *

-

1"-14 # Clutch Pattern

N1725 53014 -

PLYMOUTH BREEZE 4 CYLINDER 1995. - 2000.

2.0L 120" ENG.

9

NOTE: MODULAR CLUTCH - INCLUDES FLYWHEEL Pressure Plate : Disc : PP & Disc : DF325417

-

-

15/16"-17 # Clutch Pattern

4166 -

GRAN FURY, GTX, ROADRUNNER, SATELLITE, BARRACUDA, BELVEDERE, DUSTER, FURY 8 CYLINDER NEW! 1960. - 1963. 5.2L 318", 5.9L 360" ENG. NOTE: w/10-1/2" CLUTCH Pressure Plate : CFT361675 Disc : 383269 PP & Disc : 1960. - 1978.

10.4 DF383269 DF269675

-

LM361675 LM383269 LM269675

4.5L 273"

NOTE: w/10-1/2" CLUTCH Pressure Plate : Disc : PP & Disc : -

#2 Clutch Pattern

10.4 CFT361675 383269 -

DF383269 DF269675

NEW! 1963. - 1972. 7.0L 426" ENG. w/10-1/2" CLUTCH NOTE: ***41001 IS PILOT BUSHING***, 143 TOOTH, 8 BOLT CRANK. Pressure Plate : CFT361739 Disc : 383269 DF383269 PP & Disc : DF269739

-

LM361675 LM383269 LM269675

#2 Clutch Pattern

LM361675 LM383269 LM269675

N1463 51023 -

1"-23 -

10.4 11361739 23383269 01269739

1"-23

1"-23 700440 #2 Clutch Pattern

N1463 51023 O IN/OZ N1463 51023 41001

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

121

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Dual Friction DF Disc DF PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Counterbalance T.O.B. Align Tool Pilot Bearing

PLYMOUTH GRAN FURY, GTX, ROADRUNNER, SATELLITE, BARRACUDA, BELVEDERE, DUSTER, FURY - Continued 8 CYLINDER 1963. - 1973.

5.6L 340", 6.3L 383" ENG. w/10-1/2" CLUTCH

NOTE: ***41001 IS PILOT BUSHING***, 143 TOOTH, 6 BOLT CRANK. Pressure Plate : CFT361739 Disc : 383269 DF383269 PP & Disc : DF269739 NEW! 1964. - 1973. 5.6L 340", 6.3L 383" ENG. w/10-1/2" CLUTCH NOTE: ***41001 IS PILOT BUSHING***, 130 TOOTH, 6 BOLT CRANK. Pressure Plate : CFT361739 Disc : 383269 DF383269 PP & Disc : DF269739

10.4 11361739 23383269 01269739

LM361675 LM383269 LM269675

DF383269 DF269675

-

LM361675 LM383269 LM269675

NOTE: w/10-1/2" CLUTCH. 143 TOOTH. Pressure Plate : CFT361675 Disc : 383269 PP & Disc : -

DF383269 DF269675

-

LM361675 LM383269 LM269675

1970. Pressure Plate : Disc : PP & Disc :

5.9L 360" ENG. w/11" CLUTCH CFT361800 384070 -

DF384070 DF070800

700420 #2 Clutch Pattern

11165552 23384070 01070800

11 LM165552 LM384070 LM070552

#3 Clutch Pattern

10.5 -

11361739 23381810 01810739

-

NOTE: 143 TOOTH. 6 BOLT CRANK. 10.5" BOLT PATTERN Pressure Plate : Disc : DF381810 PP & Disc : DF810739

11361739 23381810 01810739

-

NOTE: 143 TOOTH. HEMI & WEDGE ENG w/8 BOLT CRANK. 10.5" BOLT PATTERN Pressure Plate : 11361739 Disc : DF381810 23381810 PP & Disc : DF810739 01810739

-

NOTE: 130 TOOTH. 6 BOLT CRANK. 10.5" BOLT PATTERN Pressure Plate : Disc : DF384175 PP & Disc : DF175810

11361911 23384175 01175810

-

NOTE: 143 TOOTH. 6 BOLT CRANK. 10.5" BOLT PATTERN Pressure Plate : Disc : DF384175 PP & Disc : DF175810

11361911 23384175 01175810

-

N1463 51023 41001 0 IN/OZ N1463 51023 41001 0 IN/OZ N1463 51023 N1463 51023 0 IN/OZ N1463 51023 -

#3 Clutch Pattern

1-3/16-18

0 IN/OZ

#2 Clutch Pattern

N1703 51018 -

1-3/16-18

0 IN/OZ

#2 Clutch Pattern

N1703 51018 -

1-3/16-18

0 IN/OZ

700400 900400 #2 Clutch Pattern

700420 #2 Clutch Pattern

700440 10-15/16

0 IN/OZ

N1463 51023 -

700440 10.5

7.2L 440" ENG. w/10.95" CLUTCH

1"-23 -

700440 -

-

NEW! 1970. - 1972. 7.2L 440" ENG. w/10.5" CLUTCH NOTE: 130 TOOTH. 6 BOLT CRANK. 10.5" BOLT PATTERN Pressure Plate : Disc : DF381810 PP & Disc : DF810739

1"-23 700420 -

10-15/16

NOTE: 143 TOOTH. HEMI & WEDGE ENG w/8 BOLT CRANK. 10.5" BOLT PATTERN Pressure Plate : 11361911 Disc : DF384175 23384175 PP & Disc : DF175810 01175810

1970. - 1972.

#2 Clutch Pattern

LM165552 LM384070 LM070552

7.0L 426" ENG. w/10.95" CLUTCH

1"-23 700400 900400

11165552 23384070 01070800

NEW! 1970. - 1971. 7.0L 426" ENG. w/10.5" CLUTCH NOTE: 143 TOOTH. HEMI & WEDGE ENG w/8 BOLT CRANK. 10.5" BOLT PATTERN Pressure Plate : 11361739 Disc : DF381810 23381810 PP & Disc : DF810739 01810739 1970. - 1971.

#2 Clutch Pattern

11 DF384070 DF070800

1"-23 700400 900400

10.4

6.3L 383" ENG. w/11" CLUTCH

NOTE: 143 TOOTH. 6 BOLT CRANK. Pressure Plate : CFT361800 Disc : 384070 PP & Disc : -

#2 Clutch Pattern

LM361675 LM383269 LM269675

NEW! 1964. - 1978. 5.2L 318" ENG. NOTE: w/10-1/2" CLUTCH. 130 TOOTH. Pressure Plate : CFT361675 Disc : 383269 PP & Disc : -

1968. - 1974.

700420 -

10.4 11361739 23383269 01269739

1"-23

N1703 51018 N1703 51018 -

#2 Clutch Pattern

N1703 51018 -

1-3/16-18

0 IN/OZ

700400 900400 #2 Clutch Pattern

700420 #2 Clutch Pattern

N1703 51018 N1703 51018 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

122

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Dual Friction DF Disc DF PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Counterbalance T.O.B. Align Tool Pilot Bearing

PLYMOUTH GRAN FURY, GTX, ROADRUNNER, SATELLITE, BARRACUDA, BELVEDERE, DUSTER, FURY - Continued 8 CYLINDER

NEW! 1970. - 1972. 7.2L 440" ENG. w/10.95" CLUTCH NOTE: 143 TOOTH. HEMI & WEDGE ENG w/8 BOLT CRANK. 10.5" BOLT PATTERN Pressure Plate : 11361911 Disc : DF384175 23384175 PP & Disc : DF175810 01175810 NEW! 1971. - 1974. 5.9L 360" ENG. w/11" CLUTCH NOTE: 143 TOOTH. Pressure Plate : CFT361800 Disc : 384070 PP & Disc : -

10-15/16 -

700440 #2 Clutch Pattern

11 DF384070 DF070800

11165552 23384070 01070800

1-3/16-18

LM165552 LM384070 LM070552

NEW! 1971. - 1978. 5.9L 360" ENG. NOTE: w/10-1/2" CLUTCH. 130 TOOTH. Pressure Plate : CFT361675 Disc : 383269 PP & Disc : -

DF383269 DF269675

-

LM361675 LM383269 LM269675

NOTE: w/10-1/2" CLUTCH. 143 TOOTH. Pressure Plate : CFT361675 Disc : 383269 PP & Disc : -

DF383269 DF269675

-

LM361675 LM383269 LM269675

11014040 23014040 01014040

-

1"-23 700450 #3 Clutch Pattern

10.4

1"-23 700460 #2 Clutch Pattern

700450 #2 Clutch Pattern

0 IN/OZ N1703 51018 19.8 IN/OZ N1463 51023 19.8 IN/OZ N1463 51023 N1463 51023 -

HORIZON, SCAMP, SHELBY, TC3, TURISMO 4 CYLINDER 1981. - 1988. Pressure Plate : Disc : PP & Disc :

2.2L 135" ENG. TURBO & TURBO II CF360040 CFT360040 381014 381014 -

9 DF014040

13/16"-18 # Clutch Pattern

N1728 51001 -

NEON 4 CYLINDER 1994. - 1995.

2.0L SOHC & DOHC

NOTE: O.E. CLUTCH DISC MAY BE 8-1/2" Pressure Plate : CF361973 Disc : 381973 PP & Disc : 1996. - 1999.

9 DF973973

11973973 23973973 01973973

2.0L 120" ENG.

# Clutch Pattern

9

NOTE: MEXICO BUILT. The 11th Digit of the VIN# is "T" O.E. CLUTCH DISC MAY BE 8-1/2" Pressure Plate : CF361973 11973973 Disc : 381973 23973973 PP & Disc : DF973973 01973973 1996. - 2005.

-

-

2.0L 120" ENG.

15/16"-17

15/16"-17 # Clutch Pattern

9

NOTE: USA BUILT. The 11th Digit of the VIN# is "D" MODULAR CLUTCH - INCLUDES FLYWHEEL Pressure Plate : Disc : PP & Disc : DF325417 -

4166 51002 -

4166 51002 -

15/16"-17 # Clutch Pattern

4166 -

RELIANT, ACCLAIM 4 CYLINDER 1984. - 1989. Pressure Plate : Disc : PP & Disc :

2.2L 135" & 2.5L 153" ENG. TURBO CF360040 CFT360040 381014 381014 -

9

1986. - 1989. Pressure Plate : Disc : PP & Disc :

2.5L 153" ENG. NON-TURBO CF360040 CFT360040 381014 381014 -

1991. - 1993. Pressure Plate : Disc : PP & Disc :

2.5L 153" ENG. TURBO & NON-TURBO CF360040 CFT360040 381099 381099 DF045040

DF014040

11014040 23014040 01014040

-

# Clutch Pattern

9 DF014040

11014040 23014040 01014040

-

13/16"-18 # Clutch Pattern

9 -

13/16"-18 -

-

15/16"-17 # Clutch Pattern

N1728 51001 N1728 51001 N1728 51002 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

123

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Dual Friction DF Disc DF PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Counterbalance T.O.B. Align Tool Pilot Bearing

PLYMOUTH SUNDANCE 4 CYLINDER

1987. - 1988. Pressure Plate : Disc : PP & Disc :

2.2L 135" ENG. TURBO CF360040 CFT360040 381014 381014 -

1987. - 1990. Pressure Plate : Disc : PP & Disc :

2.5L 153" ENG. NON-TURBO CF360040 CFT360040 381014 381014 -

1989. - 1990. Pressure Plate : Disc : PP & Disc :

2.5L 153" ENG. TURBO CF360040 CFT360040 381014 381014 -

1991. - 1992. Pressure Plate : Disc : PP & Disc :

2.2L 135" ENG. TURBO IV CFT360066 381099 -

1991. - 1994. Pressure Plate : Disc : PP & Disc :

9 DF014040

11014040 23014040 01014040

-

# Clutch Pattern

9 DF014040

11014040 23014040 01014040

-

11014040 23014040 01014040

-

-

2.5L 153" ENG. TURBO & NON-TURBO CF360040 CFT360040 381099 381099 DF099040

13/16"-18 # Clutch Pattern

9 DF049066

13/16"-18 # Clutch Pattern

9 DF014040

13/16"-18 -

-

15/16"-17 # Clutch Pattern

9 -

-

DF099040

-

-

DF384070 DF070552

-

11 LM165552 LM384070 LM070552

DF384070 DF070552

-

11 LM165552 LM384070 LM070552

-

11 LM165552 LM384070 LM070552

DF383269 DF269675 DF383269 DF269675

-

10.4 LM361675 LM383269 LM269675 LM361675 LM383269 LM269675

DF014040

11014040 23014040 01014040

15/16"-17 # Clutch Pattern

N1728 51001 N1728 51001 N1728 51001 N1728 51002 N1728 51002 -

6 CYLINDER 1993. - 1994. Pressure Plate : Disc : PP & Disc :

3.0L 185" ENG. CF360040 381099 -

9 CFT360040 381099 -

15/16"-17 # Clutch Pattern

N1728 51002 -

PLYMOUTH LIGHT TRUCK & VAN TRAILDUSTER 6 CYLINDER 1974. - 1983. Pressure Plate : Disc : PP & Disc :

3.7L 225" ENG. CF165552 384070 -

CFT165552 384070 -

1"-23 # Clutch Pattern

N1463 51023 -

8 CYLINDER 1974. - 1987. Pressure Plate : Disc : PP & Disc :

5.2L 318" ENG. w/11" CLUTCH CF165552 CFT165552 384070 384070 -

1974. - 1987. Pressure Plate : Disc : PP & Disc :

5.9L 360" ENG. CF165552 384070 -

1977. - 1987. Pressure Plate : Disc : PP & Disc :

5.2L 318" ENG. w/10-1/2" CLUTCH CF361675 CFT361675 383269 383269 CF361675 CFT361675 383269 383269 -

Pressure Plate : Disc : PP & Disc :

CFT165552 384070 -

DF384070 DF070552

1"-23 700420 # Clutch Pattern

1"-23 700450 #3 Clutch Pattern

1"-23 700400 900400 #2 Clutch Pattern

700420 #2 Clutch Pattern

0 IN/OZ N1463 51023 19.8 IN/OZ N1463 51023 0 IN/OZ N1463 51023 N1463 51023 -

VOYAGER 4 CYLINDER 1983. - 1986. Pressure Plate : Disc : PP & Disc :

2.6L 156" ENG. CF360040 381014 -

9 CFT360040 381014 -

-

13/16"-18 # Clutch Pattern

N1728 51001 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

124

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Dual Friction DF Disc DF PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Counterbalance T.O.B. Align Tool Pilot Bearing

PLYMOUTH LIGHT TRUCK & VAN VOYAGER - Continued 4 CYLINDER

1983. - 1988. Pressure Plate : Disc : PP & Disc :

2.2L 135" ENG. CF360040 381014 -

9

1987. - 1990. Pressure Plate : Disc : PP & Disc :

2.5L 153" ENG. TURBO & NON-TURBO CF360040 CFT360040 381014 381014 DF014040

1991. - 1992. Pressure Plate : Disc : PP & Disc :

2.5L 153" ENG. NON-TURBO CF360040 CFT360040 381099 381099 -

1991. - 1992. Pressure Plate : Disc : PP & Disc :

2.5L 153" ENG. TURBO CF360040 CFT360040 381099 381099 -

CFT360040 381014 -

DF014040

11014040 23014040 01014040

-

# Clutch Pattern

9 11014040 23014040 01014040

-

-

-

-

-

DF014040

11014040 23014040 01014040

-

15/16"-17 # Clutch Pattern

9 DF099040

13/16"-18 # Clutch Pattern

9 DF045040

13/16"-18 -

15/16"-17 # Clutch Pattern

N1728 51001 N1728 51001 N1728 51002 N1728 51002 -

6 CYLINDER 1990. Pressure Plate : Disc : PP & Disc :

3.0L 181" ENG. CF360040 381014 -

1991. - 1992. Pressure Plate : Disc : PP & Disc :

3.0L 181" ENG. CF360040 381099 -

9 CFT360040 381014 -

# Clutch Pattern

9 CFT360040 381099 -

DF045040

-

1975.11 - 1981. Pressure Plate : Disc : PP & Disc :

1.6L ARROW 160 CF006518 CFT518006

DF518006

-

1977. - 1981. Pressure Plate : Disc : PP & Disc :

2.6L ARROW GT CF780581 CFT581780

1981. - 1983. Pressure Plate : Disc : PP & Disc :

2.0L ARROW PICK-UP CFT510001

DF510001

-

1979. - 1984. Pressure Plate : Disc : PP & Disc :

1.4L CHAMP H/B CF006518 CFT518006

DF518006

-

1984. - EOP. Pressure Plate : Disc : PP & Disc :

1.6L CHAMP 8 T/M 4 SPD. CF006518 CFT518006

13/16"-18 -

-

15/16"-17 # Clutch Pattern

N1728 51001 N1728 51002 -

PLYMOUTH-MITSUBISHI ARROW 200

7-7/8 -

225 DF581780

11515004 23515004 01515004

# Clutch Pattern

8-7/8 -

215

7/8"-20 1"-23 # Clutch Pattern

8-19/32 -

1"-23 # Clutch Pattern

010 50020 550 52008 52008 -

CHAMP 200

7-7/8 -

200 DF518006

-

7/8"-20 # Clutch Pattern

7-7/8 -

7/8"-20 # Clutch Pattern

210 50020 210 50020 -

CONQUEST 1984.05 - 1987.05

2.6L CONQUEST

225

NOTE: NON-TURBO & TURBO w/o INTERCOOLER Pressure Plate : Disc : PP & Disc : CF004515 CFT515004

DF515004

11515004 23515004 01515004

8-7/8 -

1"-23 # Clutch Pattern

550 52008 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

125

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Dual Friction DF Disc DF PP & Disc

Counterbalance T.O.B. Align Tool Pilot Bearing

PLYMOUTH-MITSUBISHI CONQUEST - Continued

1985.05 - 1987.05

2.6L CONQUEST

225

NOTE: TURBO w/ INTERCOOLER Pressure Plate : Disc : PP & Disc : CF004515 CFT515004 1987.06 - 1990.

DF515004

11515004 23515004 01515004

2.6L CONQUEST

8-7/8 -

240

NOTE: TURBO & NON TURBO Pressure Plate : Disc : PP & Disc : CF033537 CFT537033

DF537033

11500300 23544020 01500300

DF518006

-

1"-23 # Clutch Pattern

9-7/16 -

422 52008 -

1"-23 # Clutch Pattern

422 52008 -

LASER 1989. - 1994. Pressure Plate : Disc : PP & Disc :

1.8L LASER CF006518

200

1989. - 1994. Pressure Plate : Disc : PP & Disc :

2.0L LASER NON-TURBO CF012516 *

1989. - 1994. Pressure Plate : Disc : PP & Disc :

2.0L LASER TURBO CF010536 *

CFT518006

7-7/8 -

215 DF516012

-

*

-

DF536010

CFT581780

DF581780

*

11010635 23536010 01536010

# Clutch Pattern

8-19/32 -

225

* *

7/8"-20 7/8"-20 # Clutch Pattern

8-7/8 -

7/8"-20 # Clutch Pattern

210 50020 210 50020 210 50020 -

SAPPORO 1977. - 1983. Pressure Plate : Disc : PP & Disc :

2.6L SAPPORO CF780581

1979. - 1983. Pressure Plate : Disc : PP & Disc :

1.6L SAPPORO CF006518

225 11515004 23515004 01515004

8-7/8 -

200 CFT518006

DF518006

-

-

DF201914

*

11201914 23201914 01201914

*

-

*

11201914 23201914 01201914

1"-23 # Clutch Pattern

7-7/8 -

7/8"-20 # Clutch Pattern

550 52008 010 50020 -

PONTIAC 6000 6 CYLINDER 1987. - 1988. Pressure Plate : Disc : PP & Disc :

2.8L 171" ENG. MS361914 *

9-1/8

* *

-

1"-14 # Clutch Pattern

N1747 53014 -

ASTRE, SUNBIRD, J2000 4 CYLINDER 1983. - 1985. Pressure Plate : Disc : PP & Disc :

2.0L 121" ENG. 5 SPD. ONLY CF361910 * 384204 -

8-1/2 DF204910

-

1"-14 # Clutch Pattern

N1744 53014 -

6 CYLINDER 1991. - 1992. Pressure Plate : Disc : PP & Disc :

3.1L 189" ENG. MS361914 *

1993. - 1994. Pressure Plate : Disc : PP & Disc :

3.1L 189" ENG. CF361963 * 384201 -

9-1/8 -

DF201914

* *

-

# Clutch Pattern

9-1/8 -

DF201963

-

*

1"-14 -

-

1"-14 # Clutch Pattern

N1747 53014 53014 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

126

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Dual Friction DF Disc DF PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Counterbalance T.O.B. Align Tool Pilot Bearing

PONTIAC BONNEVILLE, CATALINA, CHIEFTAN, CUSTOM, EXECUTIVE, GRAND PRIX (RWD), GRANDVILLE 6 CYLINDER

1964. - 1965. Pressure Plate : Disc : PP & Disc :

3.5L 215" ENG. CF361874 383271 -

10.4

1966. - 1967. Pressure Plate : Disc : PP & Disc :

3.8L 230" ENG. CF361874 383271 -

1966. - 1967. Pressure Plate : Disc : PP & Disc :

3.8L 230" ENG. H. D. CF361675 CFT361675 383271 383271 -

CFT361874 383271 -

DF383271 DF271874

-

-

# Clutch Pattern

10.4 CFT361874 383271 -

DF383271 DF271874

-

1-1/8"-10 -

-

1-1/8"-10 # Clutch Pattern

DF383271 DF271675

11361739 23383271 01271739

10.4 LM361675 LM383271 LM271675

1-1/8"-10 -

DF383271 DF271675

11361739 23383271 01271739

10.4 LM361675 LM383271 LM271675

11361739 23383271 01271739

10.4 LM361675 LM383271 LM271675

# Clutch Pattern

10.4

1-1/8"-10

# Clutch Pattern

N1086 53010 N1086 53010 N1716 53010 43002

8 CYLINDER NEW! 1963. Pressure Plate : Disc : PP & Disc :

5.3L 326" ENG. STD & H.D. CF361675 CFT361675 383271 383271 -

1963. - 1966. Pressure Plate : Disc : PP & Disc :

6.4L 389" ENG. 2 BBL ONLY CF361675 CFT361675 383271 383271 -

1964. - 1967.

DF383271 DF271675

5.3L 326" ENG. STD & H.D.

NOTE: 2.750" DIA. CRANK REGISTER 4.22 IN/OZ BAL Pressure Plate : CF361675 CFT361675 Disc : 383271 383271 DF383271 PP & Disc : DF271675 1965. - 1966. Pressure Plate : Disc : PP & Disc : 1967. - 1969.

6.4L 389" ENG. 4 BBL ONLY CF165552 CFT165552 383735 383735 -

DF383735 DF735552

LM361675 LM383271 LM271675

NOTE: 2.750" DIA. CRANK REGISTER 4.22 IN/OZ BAL Pressure Plate : CF165552 CFT165552 Disc : 383735 383735 DF383735 PP & Disc : DF735552

#3 Clutch Pattern

1-1/8"-10 700600 #2 Clutch Pattern

11 11165552 23383735 01735552

1-1/8"-10 700600 -

LM361675 LM383271 LM271675

7.5L 455" ENG. 3 SPD

1-1/8"-10

#3 Clutch Pattern

10.4 11361739 23383271 01271739

1-1/8"-10

700600 -

LM165552 LM383735 LM735552

5.7L 350" ENG. 3 SPD.

# Clutch Pattern

#2 Clutch Pattern

11 11165552 23383735 01735552

1-1/8"-10 -

700600 -

LM165552 LM383735 LM735552

6.6L 400" ENG. H. D. w/11" CLUTCH

NOTE: 2.750" DIA. CRANK REGISTER 4.22 IN/OZ BAL Pressure Plate : CF361675 CFT361675 Disc : 383271 383271 DF383271 PP & Disc : DF271675 1970. - 1971.

11165552 23383735 01735552

1-1/8"-10 -

#2 Clutch Pattern

10.4 11361739 23383271 01271739

#2 Clutch Pattern

700600 -

11

NOTE: 2.750" DIA. CRANK REGISTER 4.22 IN/OZ BAL Pressure Plate : CF165552 CFT165552 Disc : 383735 383735 DF383735 PP & Disc : DF735552 1968. - 1977.

11165552 23383735 01735552

11 LM165552 LM383735 LM735552

7.0L 428" ENG.

NOTE: 2.750" DIA. CRANK REGISTER 4.22 IN/OZ BAL Pressure Plate : CF165552 CFT165552 Disc : 383735 383735 DF383735 PP & Disc : DF735552 1967. - 1970.

LM361675 LM383271 LM271675

6.6L 400" ENG. w/10-1/2" CLUTCH

NOTE: 2.750" DIA. CRANK REGISTER 4.22 IN/OZ BAL Pressure Plate : CF361739 CFT361739 Disc : 383271 383271 DF383271 PP & Disc : DF271739 1967. - 1969.

11361739 23383271 01271739

1-1/8"-10 -

LM165552 LM383735 LM735552

1-1/8"-10 700600 #3 Clutch Pattern

N1716 53010 43002 N1716 53010 43002 4.22 IN/OZ N1716 53010 43002 N1716 53010 43002 4.22 IN/OZ N1716 53010 4.22 IN/OZ N1716 53010 43002 4.22 IN/OZ N1716 53010 43002 4.22 IN/OZ N1716 53010 43002 4.22 IN/OZ N1716 53010 43002

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

127

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Dual Friction DF Disc DF PP & Disc

Counterbalance T.O.B. Align Tool Pilot Bearing

PONTIAC BONNEVILLE, CATALINA, CHIEFTAN, CUSTOM, EXECUTIVE, GRAND PRIX (RWD), GRANDVILLE - Cont. 8 CYLINDER 1970. - 1972.

6.6L 400" ENG. 3 SPD

10.4

NOTE: 2.750" DIA. CRANK REGISTER 4.22 IN/OZ BAL Pressure Plate : CF361739 CFT361739 Disc : 383271 383271 DF383271 PP & Disc : DF271739 1971. - 1972.

11361739 23383271 01271739

5.7L 350" ENG. 4 SPD 11361739 23384161 01161739

11361739 23384161 01161739

#2 Clutch Pattern

LM361675 LM384161 LM161675

7.5" 455" ENG. 4 SPD.

1-1/8"-26 700600 #2 Clutch Pattern

12 -

1-1/8"-26 700600 #3 Clutch Pattern

7.5L 455" ENG. 4 SPD

11

NOTE: 2.750" DIA. CRANK REGISTER 4.22 IN/OZ BAL Pressure Plate : CF165552 CFT165552 Disc : 384148 384148 DF384148 PP & Disc : DF148552

1-1/8"-26 700600 -

10.4

NOTE: 12" HEAVY DUTY UPGRADE 2.750" DIA. CRANK REGISTER 4.22 IN/OZ BAL Pressure Plate : Disc : DF382612 PP & Disc : DF612909 1971. - 1972.

#2 Clutch Pattern

LM361675 LM384161 LM161675

6.6L 400" ENG. 4 BBL, 4 SPD.

NOTE: 2.750" DIA. CRANK REGISTER 4.22 IN/OZ BAL Pressure Plate : CF361739 CFT361739 Disc : 384161 384161 DF384161 PP & Disc : DF161739 1971. - 1972.

700600 -

10.4

NOTE: 2.750" DIA. CRANK REGISTER 4.22 IN/OZ BAL Pressure Plate : CF361675 CFT361675 Disc : 384161 384161 DF384161 PP & Disc : DF161675 1971. - 1972.

LM361675 LM383271 LM271675

1-1/8"-10

11165552 23384148 01148552

LM165552 LM384148 LM148552

-

-

1-1/8"-26 700600 #3 Clutch Pattern

4.22 IN/OZ N1716 53010 4.22 IN/OZ N1716 53026 43002 4.22 IN/OZ N1716 53026 4.22 IN/OZ N1716 53026 43001 4.22 IN/OZ N1716 53026 43002

FIERO 4 CYLINDER 1984. Pressure Plate : Disc : PP & Disc :

2.5L 151" ENG. 4 SPD. w/ 8-1/2" CLUTCH CF361910 * 384204 DF204910

1984. Pressure Plate : Disc : PP & Disc :

2.5L 151" ENG. 4 SPD. w/ 9-1/8" CLUTCH MS361914 DF201914 *

1985. - 1988. Pressure Plate : Disc : PP & Disc :

2.5L 151" ENG. 5 SPD CF361910 * 384204 -

8-1/2

*

# Clutch Pattern

9-1/8

*

11201914 23201914 01201914

* *

-

*

-

*

11201914 23201914 01201914

1"-14 # Clutch Pattern

8-1/2 DF204910

1"-14 -

-

1"-14 # Clutch Pattern

N1725 53014 N1725 53014 N1744 53014 -

6 CYLINDER 1985. - 1986. Pressure Plate : Disc : PP & Disc :

2.8L 171" ENG. 4 SPD MS361914 *

1986. - 1988. Pressure Plate : Disc : PP & Disc :

2.8L 171" ENG. 5 SPD MS361914 *

9-1/8 DF201914

* *

-

# Clutch Pattern

9-1/8 DF201914

*

11201914 23201914 01201914

* *

1"-14 -

-

1"-14 # Clutch Pattern

N1725 53014 N1747 53014 -

8 CYLINDER 1984. - 1988.

AFTERMARKET 1955-85 GM V8 ENG - CONVERSION

9-1/8

NOTE: V8 ARCHIE KIT w/ GM 2pc REAR MAIN SEAL - REQUIRES CENTERFORCE FLYWHEEL. Pressure Plate : Disc : PP & Disc : DF201502 *

-

1"-14 700501 #19 Clutch Pattern

9-1/8 NEW! 1984. - 1988. AFTERMARKET 1955-85 GM V8 ENG - CONVERSION NOTE: V8 ARCHIE KIT w/ GM 1pc REAR MAIN SEAL 23.4 in/oz - REQUIRES CENTERFORCE FLYWHEEL. Pressure Plate : Disc : PP & Disc : DF201502 *

1"-14 700502 #19 Clutch Pattern

0 IN/OZ 53014 23.4 IN/OZ 53014 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

128

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Dual Friction DF Disc DF PP & Disc

Counterbalance T.O.B. Align Tool Pilot Bearing

PONTIAC FIERO - Continued 8 CYLINDER 1984. - 1988.

AFTERMARKET GM V8 LS1 CONVERSION

9-1/8

NOTE: V8 ARCHIE KIT - REQUIRES CENTERFORCE FLYWHEEL. SEE FLYWHEEL SECTION Pressure Plate : Disc : PP & Disc : DF201965 *

-

1"-14 700503 #19 Clutch Pattern

0 IN/OZ 53014 -

FIREBIRD, TRANS AM 4 CYLINDER 1983. - 1986. Pressure Plate : Disc : PP & Disc :

2.5L 151" ENG. 5 SPD CF361902 384201 -

9-1/8 DF201902

-

-

DF383271 DF271874

-

-

1"-14 # Clutch Pattern

N1716 53006 -

6 CYLINDER 1967. - 1969. Pressure Plate : Disc : PP & Disc :

3.8L 230", 4.1L 250" ENG. 1 BBL CF361874 CFT361874 383271 383271 -

10.4

1967. - 1969. Pressure Plate : Disc : PP & Disc :

3.8L 230", 4.1L 250" ENG. 4 BBL CF361675 CFT361675 383271 383271 -

DF383271 DF271675

11361739 23383271 01271739

1970. - 1976. Pressure Plate : Disc : PP & Disc :

4.1L 250" ENG. 1 BBL 3 SPD CF361874 CFT361874 383271 383271 -

DF383271 DF271874

-

1977. Pressure Plate : Disc : PP & Disc :

3.8L 231" ENG. 2 BBL, 4 SPD. CF361874 CFT361874 383271 383271 -

1978. Pressure Plate : Disc : PP & Disc :

3.8L 231" ENG. CF361874 383271 -

1979. - 1981. Pressure Plate : Disc : PP & Disc :

3.8L 229," 231" ENG. CF361675 CFT361675 383271 383271 -

1983. - 1984. Pressure Plate : Disc : PP & Disc :

2.8L 171" ENG. 5 SPD CF361900 384201 -

1985. - 1989. Pressure Plate : Disc : PP & Disc :

2.8L 171" ENG. CF361902 384201 -

1990. - 1992. Pressure Plate : Disc : PP & Disc :

3.1L 189" ENG. 5 SPD CF361902 384201 -

1993. - 1995. Pressure Plate : Disc : PP & Disc :

3.4L 207" ENG. CF361965 381504 -

1996. - 2002. Pressure Plate : Disc : PP & Disc :

3.8L 231" ENG. CF360076 * 381504 -

# Clutch Pattern

10.4 LM361675 LM383271 LM271675 10.4 -

-

-

DF383271 DF271874

-

DF383271 DF271675

11361739 23383271 01271739

-

-

-

DF201902

-

-

-

-

DF504965

-

-

DF504076

-

*

# Clutch Pattern

1"-14 1"-14 1"-14 1-1/8"-26 # Clutch Pattern

9-11/16 -

1-1/8"-10 -

# Clutch Pattern

9-11/16 -

1-1/8"-10 -

# Clutch Pattern

9-1/8 DF201902

1-1/8"-10 -

# Clutch Pattern

9-1/8 -

1-1/8"-10 -

# Clutch Pattern

10.4 LM361675 LM383271 LM271675 9-1/8

DF201900

# Clutch Pattern

# Clutch Pattern

10.4 CFT361874 383271 -

1-1/8"-10 -

# Clutch Pattern

10.4 DF383271 DF271874

1-1/8"-10 -

-

1-1/8"-26 # Clutch Pattern

N1086 53010 N1716 53010 43001 N1086 53010 N1086 53010 N1086 53010 N1716 53010 43001 N1716 53006 N1716 53006 N1716 53006 N1716 53026 N1777 53026 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

129

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Dual Friction DF Disc DF PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Counterbalance T.O.B. Align Tool Pilot Bearing

PONTIAC FIREBIRD, TRANS AM - Continued 8 CYLINDER 1967.

5.4L 326" ENG.

10.4

NOTE: 2.750" DIA. CRANK REGISTER 4.22 IN/OZ BAL Pressure Plate : CF361675 CFT361675 Disc : 383271 383271 DF383271 PP & Disc : DF271675 1967. - 1972.

11361739 23383271 01271739

11361739 23383271 01271739

11361739 23384161 01161739

11361739 23384161 01161739

5.7L 350" ENG. 2 & 4 BBL 4 SPD NEW! 1977. NOTE: 2.490" DIA. CRANK REGISTER Pressure Plate : CF361675 CFT361675 Disc : 384161 384161 PP & Disc : 5.7L 350" ENG. 2 BBL, 3 SPD. NEW! 1977. NOTE: 2.490" DIA. CRANK REGISTER Pressure Plate : CF361675 CFT361675 Disc : 383271 383271 PP & Disc : -

#2 Clutch Pattern

#3 Clutch Pattern

-

#3 Clutch Pattern

1-1/8"-26

11361739 23384161 01161739

LM361675 LM384161 LM161675

11361739 23383271 01271739

10.4 LM361675 LM383271 LM271675

#2 Clutch Pattern

10.4

1-1/8"-26

11361739 23384161 01161739

700600 #2 Clutch Pattern

LM361675 LM384161 LM161675

11361739 23383271 01271739

1-1/8"-10 -

700610 #2 Clutch Pattern

10.4 DF383271 DF271675

1-1/8"-26 700600 -

10.4

DF384161 DF161675

1-1/8"-26 700600 -

12

DF383271 DF271675

1-1/8"-26 700600 -

LM165552 LM384148 LM148552

5.7L 350" ENG. 2 & 4 BBL 4 SPD

CFT361675 383271 -

#2 Clutch Pattern

11 11165552 23384148 01148552

1-1/8"-26 700600 -

LM361675 LM384161 LM161675

7.5L 455" ENG. 4 BBL, 4 SPD.

4.9L 301" ENG. CF361675 383271 -

#2 Clutch Pattern

LM361675 LM384161 LM161675

7.5L 455" ENG. 4 BBL, 4 SPD.

1-1/8"-10 700600 -

10.4

NOTE: 2.750" DIA. CRANK REGISTER 4.22 IN/OZ BAL Pressure Plate : CF361675 CFT361675 Disc : 384161 384161 DF384161 PP & Disc : DF161675 1977. Pressure Plate : Disc : PP & Disc :

#2 Clutch Pattern

LM361675 LM383271 LM271675

6.6L 400" ENG. 4 BBL, 4 SPD.

1-1/8"-10 700600 -

10.4

NOTE: 2.750" DIA. CRANK REGISTER 4.22 IN/OZ BAL. 12" HEAVY DUTY UPGRADE Pressure Plate : Disc : DF382612 PP & Disc : DF612909 1975. - 1976.

#2 Clutch Pattern

LM361675 LM383271 LM271675

5.7L 350" ENG. 2 BBL, 4 SPD.

1-1/8"-10 700600 -

10.4

NOTE: 2.750" DIA. CRANK REGISTER 4.22 IN/OZ BAL Pressure Plate : CF165552 CFT165552 Disc : 384148 384148 DF384148 PP & Disc : DF148552 1973. - 1976.

LM361675 LM383271 LM271675

5.7L 350" ENG. HIGH OUTPUT

NOTE: 2.750" DIA. CRANK REGISTER 4.22 IN/OZ BAL Pressure Plate : CF361675 CFT361675 Disc : 384161 384161 DF384161 PP & Disc : DF161675 1973. - 1976.

#2 Clutch Pattern

10.4

NOTE: 2.750" DIA. CRANK REGISTER 4.22 IN/OZ BAL Pressure Plate : CF361675 CFT361675 Disc : 384161 384161 DF384161 PP & Disc : DF161675 1971. - 1977.

11361739 23383271 01271739

5.7L 350" ENG. 2 BBL, 3 SPD.

NOTE: 2.750" DIA. CRANK REGISTER 4.22 IN/OZ BAL Pressure Plate : CF361675 CFT361675 Disc : 383271 383271 DF383271 PP & Disc : DF271675 1971. - 1974.

700600 -

10.4

NOTE: 2.750" DIA. CRANK REGISTER 4.22 IN/OZ BAL Pressure Plate : CF361675 CFT361675 Disc : 383271 383271 DF383271 PP & Disc : DF271675 1969. - 1971.

LM361675 LM383271 LM271675

6.6L 400" ENG. RAM AIR

NOTE: 2.750" DIA. CRANK REGISTER 4.22 IN/OZ BAL Pressure Plate : CF361739 CFT361739 Disc : 383271 383271 DF383271 PP & Disc : DF271739 1968. - 1977.

11361739 23383271 01271739

1-1/8"-10

LM361675 LM383271 LM271675

1-1/8"-10 700610 #2 Clutch Pattern

4.22 IN/OZ N1716 53010 43002 4.22 IN/OZ N1716 53010 4.22 IN/OZ N1716 53010 43002 4.22 IN/OZ N1716 53010 43002 4.22 IN/OZ N1716 53026 43002 4.22 IN/OZ N1716 53026 43002 4.22 IN/OZ N1716 53026 43002 4.22 IN/OZ N1716 53026 43001 4.22 IN/OZ N1716 53026 43002 N1716 53010 43002 7.5 IN/OZ N1716 53026 43002 7.5 IN/OZ N1716 53010 43002

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

130

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Dual Friction DF Disc DF PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Counterbalance T.O.B. Align Tool Pilot Bearing

PONTIAC FIREBIRD, TRANS AM - Continued 8 CYLINDER

6.6L 400" ENG. 4 BBL, 4 SPD. NEW! 1977. NOTE: 2.490" DIA. CRANK REGISTER Pressure Plate : CF361675 CFT361675 Disc : 384161 384161 PP & Disc : 1977. - 1978.

10.4 DF384161 DF161675

11361739 23384161 01161739

5.0L 305" ENG.

NEW! 1977. - 1978. 5.0L 305" ENG. NOTE: 2.490" DIA. CRANK REGISTER Pressure Plate : CF361874 CFT361874 Disc : 383271 383271 PP & Disc : -

-

DF383271 DF271874

-

11165552 23384148 01148552

#2 Clutch Pattern

-

#2 Clutch Pattern

#3 Clutch Pattern

-

NEW! 1977. - 1979. 6.6L 400" ENG. NOTE: 2.490" DIA. CRANK REGISTER. 12" HEAVY DUTY UPGRADE Pressure Plate : Disc : DF382612 PP & Disc : DF612909

#3 Clutch Pattern

LM165552 LM384148 LM148552

#3 Clutch Pattern

-

5.7L 350" ENG.

5.7L 350" ENG. NEW! 1978. NOTE: 2.490" DIA. CRANK REGISTER Pressure Plate : CF361675 CFT361675 Disc : 383271 383271 PP & Disc : -

11361739 23383271 01271739

#3 Clutch Pattern

LM361675 LM383271 LM271675

11361739 23383271 01271739

#2 Clutch Pattern

LM361675 LM383271 LM271675

4.9L 301" ENG.

4.9L 301" ENG. NEW! 1979. NOTE: 2.490" DIA. CRANK REGISTER Pressure Plate : CF361675 CFT361675 Disc : 384161 384161 PP & Disc : -

11361739 23384161 01161739

#2 Clutch Pattern

LM361675 LM384161 LM161675

11361739 23384161 01161739

1-1/8"-26 700600 #2 Clutch Pattern

10.4 DF384161 DF161675

1-1/8"-10 700610 -

10.4

NOTE: 2.750" DIA. CRANK REGISTER 4.22 IN/OZ BAL Pressure Plate : CF361675 CFT361675 Disc : 384161 384161 DF384161 PP & Disc : DF161675

1-1/8"-10 700600 -

10.4 DF383271 DF271675

1-1/8"-26 700610 -

10.4

NOTE: 2.750" DIA. CRANK REGISTER 4.22 IN/OZ BAL Pressure Plate : CF361675 CFT361675 Disc : 383271 383271 DF383271 PP & Disc : DF271675

1-1/8"-26 700610 -

12 -

1-1/8"-26 700600 -

11 11165552 23384148 01148552

1-1/8"-26 700600 -

12

DF384148 DF148552

1-1/8"-10 700610 -

LM165552 LM384148 LM148552

6.6L 400" ENG.

1-1/8"-10 700600 -

11

NEW! 1977. - 1979. 6.6L 400" ENG. NOTE: 2.490" DIA. CRANK REGISTER Pressure Plate : CF165552 CFT165552 Disc : 384148 384148 PP & Disc : -

1979.

-

6.6L 400" ENG.

NOTE: 2.750" DIA. CRANK REGISTER 4.22 IN/OZ BAL. 12" HEAVY DUTY UPGRADE Pressure Plate : Disc : DF382612 PP & Disc : DF612909 -

1978.

#2 Clutch Pattern

10.4

NOTE: 2.750" DIA. CRANK REGISTER 4.22 IN/OZ BAL Pressure Plate : CF165552 CFT165552 Disc : 384148 384148 DF384148 PP & Disc : DF148552 1977. - 1979.

700610 -

10.4

NOTE: 2.750" DIA. CRANK REGISTER 4.22 IN/OZ BAL Pressure Plate : CF361874 CFT361874 Disc : 383271 383271 DF383271 PP & Disc : DF271874

1977. - 1979.

LM361675 LM384161 LM161675

1-1/8"-26

LM361675 LM384161 LM161675

1-1/8"-26 700610 #2 Clutch Pattern

7.5 IN/OZ N1716 53026 43002 4.22 IN/OZ N1086 53010 7.5 IN/OZ N1086 53010 4.22 IN/OZ N1716 53026 43002 4.22 IN/OZ N1716 53026 43001 7.5 IN/OZ N1716 53026 43002 7.5 IN/OZ N1716 53026 43001 4.22 IN/OZ N1716 53010 43001 7.5 IN/OZ N1716 53010 43001 4.22 IN/OZ N1716 53026 43002 7.5 IN/OZ N1716 53026 43002

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

131

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Dual Friction DF Disc DF PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Counterbalance T.O.B. Align Tool Pilot Bearing

PONTIAC FIREBIRD, TRANS AM - Continued 8 CYLINDER 1979.

5.0L 305" ENG. 4 SPD

10.4

NOTE: 2.750" DIA. CRANK REGISTER 4.22 IN/OZ BAL Pressure Plate : CF361675 CFT361675 Disc : 383271 383271 DF383271 PP & Disc : DF271675 1980.

DF383271 DF271675

11361739 23383271 01271739

DF383271 DF271675

11361739 23383271 01271739

11361739 23384161 01161739

DF384161 DF161675

11361739 23384161 01161739

11165552 23384148 01148552

DF384161 DF161056

11360056 23384161 01161056

-

11360056 23384161 01161056

#3 Clutch Pattern

#3 Clutch Pattern

-

#2 Clutch Pattern

11360010 23384148 01017010

1-1/8"-26 700170 900170 #2 Clutch Pattern

-

1-1/8"-26 700177 #24 Clutch Pattern

11 DF381488 DF017010

1-1/8"-26 700610 -

-

5.7L 350" ENG. LS1

1-1/8"-26 700610 -

11 11361020 23381039 01039020

1-1/8"-26 700610 -

LM165552 LM384148 LM148552

5.7L 350" ENG. LT1 & LT4

NOTE: O.E. CLUTCH DISC MAY BE 11-1/2" Pressure Plate : CF360010 Disc : 381017 PP & Disc : -

#2 Clutch Pattern

10.4 DF384161 DF161056

1-1/8"-26 700610 -

10.4

NOTE: PULL-TYPE CLUTCH, 1PC REAR MAIN 23.4 IN/OZ BAL. Pressure Plate : CF361020 Disc : 381039 DF381039 PP & Disc : DF039020 1998. - 2002.

#2 Clutch Pattern

11 DF384148 DF148552

1-1/8"-26 700610 -

LM361675 LM384161 LM161675

5.0L 305" & 5.7L 350" ENG.

NOTE: 1PCS REAR MAIN 23.4 IN/OZ BAL. Pressure Plate : CF360056 CFT360056 Disc : 384161 384161 PP & Disc : 1993. - 1997.

LM361675 LM384161 LM161675

5.0L 305" ENG. (EXC.CALIF.)

NEW! 1984. - 1985. 5.0L 305" & 5.7L 350" ENG. NOTE: 2.490" DIA. CRANK REGISTER Pressure Plate : CF360056 CFT360056 Disc : 384161 384161 PP & Disc : -

#2 Clutch Pattern

12 -

1-1/8"-10 700610 -

10.4

NOTE: 2.490" DIA. CRANK REGISTER. 12" HEAVY DUTY UPGRADE Pressure Plate : Disc : DF382612 PP & Disc : DF612909

1986. - 1992.

LM361675 LM383271 LM271675

5.0L 305" ENG. (EXC. CALIF.)

NOTE: 2.490" DIA. CRANK REGISTER Pressure Plate : CF165552 CFT165552 Disc : 384148 384148 PP & Disc : -

#2 Clutch Pattern

10.4 DF384161 DF161675

1-1/8"-10 700610 -

10.4

5.0L 305" ENG. (CALIF.ONLY)

NOTE: 2.490" DIA. CRANK REGISTER Pressure Plate : CF361675 CFT361675 Disc : 384161 384161 PP & Disc : -

1981.

#2 Clutch Pattern

LM361675 LM383271 LM271675

5.0L 305" & 5.7L 350" ENG. 4 & 5 SPD

NOTE: 2.490" DIA. CRANK REGISTER Pressure Plate : CF361675 CFT361675 Disc : 384161 384161 PP & Disc : -

1981.

700600 -

10.4

NEW! 1980. - 1982. 5.0L 305" ENG. 4 SPD NOTE: 2.490" DIA. CRANK REGISTER Pressure Plate : CF361675 CFT361675 Disc : 383271 383271 PP & Disc : -

1981.

LM361675 LM383271 LM271675

4.9L 301" ENG.

NOTE: 2.490" DIA. CRANK REGISTER Pressure Plate : CF361675 CFT361675 Disc : 383271 383271 PP & Disc : -

1980. - 1983.

11361739 23383271 01271739

1-1/8"-10

LM360010 LM384148 LM017010

1-1/8"-26 700142 900142 #14 Clutch Pattern

4.22 IN/OZ N1716 53010 43001 7.5 IN/OZ N1716 53010 43001 7.5 IN/OZ N1716 53010 43001 7.5 IN/OZ N1716 53026 43001 7.5 IN/OZ N1716 53026 43001 7.5 IN/OZ N1716 53026 43001 7.5 IN/OZ N1716 53026 43001 7.5 IN/OZ N1716 53026 43001 23.4 IN/OZ N1716 53026 43001 23.4 IN/OZ INCLUDED 53026 43001 0 IN/OZ 53026 43001

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

132

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Dual Friction DF Disc DF PP & Disc

Counterbalance T.O.B. Align Tool Pilot Bearing

PONTIAC FIREBIRD, TRANS AM - Continued 8 CYLINDER 1998. - 2002.

5.7L 350" LS1 ENG.

12

NOTE: w/ HIGH BOOST FORCED INDUCTION AND/OR 125+ NITROUS O.E. CLUTCH DISC MAY BE 11-1/2" Pressure Plate : 11369010 Disc : DF382612 23382612 PP & Disc : DF395010 01395010 -

1-1/8"-26 700142 900142 #14 Clutch Pattern

0 IN/OZ 53026 43001

GRAND AM (FWD) 4 CYLINDER 1985. - 1991. Pressure Plate : Disc : PP & Disc :

2.5L 151" ENG. SOHC CF361910 * 384204 -

1988. - 1991. Pressure Plate : Disc : PP & Disc :

2.3L 140" QUAD 4 ENG. MS361914 *

1992.

*

-

DF201914

*

11201914 23201914 01201914

* *

-

2.3L 140" ENG. DOHC MS361914 *

1995. - 1999. Pressure Plate : Disc : PP & Disc :

2.3L 140" & 2.4L 146" ENG. CF360074 * 381042 -

DF201914

*

11201914 23201914 01201914

* *

-

*

11201914 23201914 01201914

* *

-

# Clutch Pattern

-

-

*

2.4L 146" ENG. 5 SPD. DF140833

-

*

-

# Clutch Pattern

*

9 -

DF561133

-

*

-

N1747 53014 -

N1747 53014 53014 53014 -

1"-14 -

2.2L 134" ENG. DOHC

NOTE: VIN F Pressure Plate : Disc : PP & Disc : CF331156

1"-14 # Clutch Pattern

9-1/8

NOTE: INCLUDES SLAVE CYLINDER Pressure Plate : Disc : PP & Disc : CF008514 *

1"-14 # Clutch Pattern

-

N1744 53014 -

1"-14 -

9 DF201074

1"-14 # Clutch Pattern

9-1/8 DF201914

1"-14 # Clutch Pattern

9-1/8

9-1/8

1992. - 1994. Pressure Plate : Disc : PP & Disc :

2002. - 2004.

-

2.3L 140" ENG.

NOTE: w/ EXTERNAL SLAVE Pressure Plate : Disc : PP & Disc : MS361914 *

2000. - 2001.

8-1/2 DF204910

INCLUDED INCLUDED -

1"-14 # Clutch Pattern

INCLUDED INCLUDED -

GRAND AM (RWD), LE MANS TO 1976, SAFARI, TEMPEST, T37, VENTURA 6 CYLINDER 1964. - 1965. Pressure Plate : Disc : PP & Disc :

3.5L 215" ENG. CF361874 383271 -

10.4

1964. - 1965. Pressure Plate : Disc : PP & Disc :

3.8L 225" ENG. CF361874 383271 -

CFT361874 383271 -

DF383271 DF271874

-

1966. - 1967. Pressure Plate : Disc : PP & Disc :

3.8L 230" ENG. H.D. CF361675 CFT361675 383271 383271 -

DF383271 DF271675

11361739 23383271 01271739

1966. - 1967. Pressure Plate : Disc : PP & Disc :

3.8L 230" ENG. STD. CF361874 CFT361874 383271 383271 -

CFT361874 383271 -

DF383271 DF271874

-

-

# Clutch Pattern

10.4 -

-

1-1/8"-10 # Clutch Pattern

10.4 LM361675 LM383271 LM271675 10.4

DF383271 DF271874

1-1/8"-10 -

-

1-1/8"-10 # Clutch Pattern

1-1/8"-10 # Clutch Pattern

N1086 53010 N1086 53010 N1716 53010 43001 N1086 53010 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

133

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Dual Friction DF Disc DF PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Counterbalance T.O.B. Align Tool Pilot Bearing

PONTIAC GRAND AM (RWD), LE MANS TO 1976, SAFARI, TEMPEST, T37, VENTURA - Continued 6 CYLINDER

1968. - 1969. Pressure Plate : Disc : PP & Disc :

4.1L 250" ENG. 1 BBL CF361874 CFT361874 383271 383271 -

1968. - 1969. Pressure Plate : Disc : PP & Disc :

4.1L 250" ENG. 4 BBL CF361675 CFT361675 383271 383271 -

1970. - 1976. Pressure Plate : Disc : PP & Disc :

4.1L 250" ENG. 1 BBL 3 SPD CF361874 CFT361874 383271 383271 -

10.4 DF383271 DF271874 DF383271 DF271675

11361739 23383271 01271739

-

# Clutch Pattern

10.4 LM361675 LM383271 LM271675 10.4

DF383271 DF271874

-

1-1/8"-10 -

-

1-1/8"-10 # Clutch Pattern

1-1/8"-10 # Clutch Pattern

N1086 53010 N1716 53010 43001 N1086 53010 -

8 CYLINDER 1963. - 1967.

5.3L 326" ENG.

10.4

NOTE: 2.750" DIA. CRANK REGISTER 4.22 IN/OZ BAL Pressure Plate : CF361675 CFT361675 Disc : 383271 383271 DF383271 PP & Disc : DF271675 1964. - 1966. Pressure Plate : Disc : PP & Disc :

6.4L 389" ENG. 2 BBL CF361675 CFT361675 383271 383271 -

1965. - 1966. Pressure Plate : Disc : PP & Disc :

6.4L 389" ENG. 4 BBL CF165552 CFT165552 383735 383735 -

1967. - 1971.

DF383271 DF271675 DF383735 DF735552

1971. - 1973.

11361739 23383271 01271739

#2 Clutch Pattern

LM361675 LM383271 LM271675

11361739 23383271 01271739

LM361675 LM383271 LM271675

LM361675 LM383271 LM271675

1-1/8"-10

1-1/8"-10

#2 Clutch Pattern

1-1/8"-10 700600 #3 Clutch Pattern

LM165552 LM384148 LM148552

1-1/8"-26 700600 #3 Clutch Pattern

12

NOTE: 2.750" DIA. CRANK REGISTER 4.22 IN/OZ BAL. 12" HEAVY DUTY UPGRADE Pressure Plate : Disc : DF382612 PP & Disc : DF612909 -

1-1/8"-10

700600 -

LM165552 LM383735 LM735552

7.5L 455" ENG. 4 SPD.

# Clutch Pattern

#2 Clutch Pattern

11 11165552 23384148 01148552

1-1/8"-10 -

700600 -

11 11165552 23383735 01735552

# Clutch Pattern

#2 Clutch Pattern

10.4 11361739 23383271 01271739

1-1/8"-10 -

700600 -

10.4

7.5L 455" ENG. 4 SPD

NOTE: 2.750" DIA. CRANK REGISTER 4.22 IN/OZ BAL Pressure Plate : CF165552 CFT165552 Disc : 384148 384148 DF384148 PP & Disc : DF148552

700600 -

10.4

7.5L 455" ENG. 4 BBL 3 SPD

NOTE: 2.750" DIA. CRANK REGISTER 4.22 IN/OZ BAL Pressure Plate : CF165552 CFT165552 Disc : 383735 383735 DF383735 PP & Disc : DF735552 1971. - 1973.

11165552 23383735 01735552

11 LM165552 LM383735 LM735552

5.7L 350" ENG. 2 & 4 BBL 3 SPD

NOTE: 2.750" DIA. CRANK REGISTER 4.22 IN/OZ BAL Pressure Plate : CF361675 CFT361675 Disc : 383271 383271 DF383271 PP & Disc : DF271675 1970. - 1971.

11361739 23383271 01271739

10.4 LM361675 LM383271 LM271675

5.7L 350" ENG. HIGH OUTPUT

NOTE: 2.750" DIA. CRANK REGISTER 4.22 IN/OZ BAL Pressure Plate : CF361675 CFT361675 Disc : 383271 383271 DF383271 PP & Disc : DF271675 1968. - 1977.

LM361675 LM383271 LM271675

6.6L 400" ENG. 3 & 4 SPD

NOTE: 2.750" DIA. CRANK REGISTER 4.22 IN/OZ BAL Pressure Plate : CF361739 CFT361739 Disc : 383271 383271 DF383271 PP & Disc : DF271739 1968. - 1969.

11361739 23383271 01271739

1-1/8"-10

-

1-1/8"-26 700600 #3 Clutch Pattern

4.22 IN/OZ N1716 53010 43002 N1716 53010 43002 N1716 53010 43002 4.22 IN/OZ N1716 53010 4.22 IN/OZ N1716 53010 43002 4.22 IN/OZ N1716 53010 43002 4.22 IN/OZ N1716 53010 43002 4.22 IN/OZ N1716 53026 43002 4.22 IN/OZ N1716 53026 43001

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

134

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Dual Friction DF Disc DF PP & Disc

Counterbalance T.O.B. Align Tool Pilot Bearing

PONTIAC GRAND AM (RWD), LE MANS TO 1976, SAFARI, TEMPEST, T37, VENTURA - Continued 8 CYLINDER 1971. - 1974.

5.7L 350" ENG. 2 BBL 4 SPD

10.4

NOTE: 2.750" DIA. CRANK REGISTER 4.22 IN/OZ BAL Pressure Plate : CF361675 CFT361675 Disc : 384161 384161 DF384161 PP & Disc : DF161675 1971. - 1977.

11361739 23384161 01161739

6.6L 400" ENG. 4 BBL 4 SPD 11361739 23384161 01161739

-

5.7L 350" ENG. 2 & 4 BBL 3 SPD NEW! 1977. NOTE: 2.490" DIA. CRANK REGISTER Pressure Plate : CF361675 CFT361675 Disc : 383271 383271 PP & Disc : 6.6L 400" ENG. 4 BBL 4 SPD NEW! 1977. NOTE: 2.490" DIA. CRANK REGISTER Pressure Plate : CF361739 CFT361739 Disc : 384161 384161 PP & Disc : -

#2 Clutch Pattern

-

-

# Clutch Pattern

-

-

#2 Clutch Pattern

-

11361739 23383271 01271739

#2 Clutch Pattern

LM361675 LM383271 LM271675

11361739 23384161 01161739

-

DF201914

11201914 23201914 01201914

CFT361675 383271 -

DF383271 DF271675

1-1/8"-10 700610 #2 Clutch Pattern

10.4 DF384161 DF161739

1-1/8"-10 700610 -

10.4 DF383271 DF271675

1-1/8"-10 700600 -

10.4 DF383271 DF271874

1-1/8"-10 700600 -

10.4

NOTE: 2.750" DIA. CRANK REGISTER 4.22 IN/OZ BAL Pressure Plate : CF361874 CFT361874 Disc : 383271 383271 DF383271 PP & Disc : DF271874

1-1/8"-26 700600 -

10.4

5.0L 305" ENG. 2 BBL 3 SPD

5.0L 305" ENG. 2 BBL 3 SPD NEW! 1977. NOTE: 2.490" DIA. CRANK REGISTER Pressure Plate : CF361874 CFT361874 Disc : 383271 383271 PP & Disc : -

#2 Clutch Pattern

LM361675 LM384161 LM161675

4.3L 260" ENG. 2 BBL 3 SPD

NOTE: 2.750" DIA. CRANK REGISTER 4.22 IN/OZ BAL Pressure Plate : CF361874 CFT361874 Disc : 383271 383271 DF383271 PP & Disc : DF271874 1977.

700600 -

10.4

NOTE: 2.750" DIA. CRANK REGISTER 4.22 IN/OZ BAL Pressure Plate : CF361739 CFT361739 Disc : 384161 384161 DF384161 PP & Disc : DF161739 1975. - 1976.

LM361675 LM384161 LM161675

1-1/8"-26

LM361675 LM384161 LM161675

1-1/8"-26 700610 #2 Clutch Pattern

4.22 IN/OZ N1716 53026 43002 4.22 IN/OZ N1716 53026 4.22 IN/OZ N1086 53010 4.22 IN/OZ N1086 53010 7.5 IN/OZ N1086 53010 7.5 IN/OZ N1716 53010 43002 7.5 IN/OZ N1716 53026 -

GRAND PRIX (FWD) 6 CYLINDER 1988. - 1989. Pressure Plate : Disc : PP & Disc :

2.8L 171" ENG. MS361914 *

9-1/8

*

* *

-

1"-14 # Clutch Pattern

N1747 53014 -

GTO 8 CYLINDER 1965. - 1966. Pressure Plate : Disc : PP & Disc :

6.4L 389" ENG. CF361675 383271 -

1967. - 1972.

6.6L 400" ENG.

11361739 23383271 01271739

NOTE: w/ 10 SPLINE TRANS, 2.750" DIA. CRANK REGISTER 4.22 IN/OZ BAL Pressure Plate : CF361739 CFT361739 11361739 Disc : 383271 383271 DF383271 23383271 PP & Disc : DF271739 01271739 1970. - 1971.

10.4 LM361675 LM383271 LM271675

#2 Clutch Pattern

10.4

1-1/8"-10

LM361675 LM383271 LM271675

7.5L 455" ENG. 4 BBL, 3 SPD.

NOTE: 2.750" DIA. CRANK REGISTER 4.22 IN/OZ BAL Pressure Plate : CF165552 CFT165552 Disc : 383735 383735 DF383735 PP & Disc : DF735552

700600 #2 Clutch Pattern

11 11165552 23383735 01735552

1-1/8"-10 -

LM165552 LM383735 LM735552

1-1/8"-10 700600 #3 Clutch Pattern

N1716 53010 43002 4.22 IN/OZ N1716 53010 4.22 IN/OZ N1716 53010 43002

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

135

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Dual Friction DF Disc DF PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Counterbalance T.O.B. Align Tool Pilot Bearing

PONTIAC GTO - Continued 8 CYLINDER 1971. - 1973.

7.5L 455" ENG. 4 SPD

11

NOTE: 2.750" DIA. CRANK REGISTER 4.22 IN/OZ BAL Pressure Plate : CF165552 CFT165552 Disc : 384148 384148 DF384148 PP & Disc : DF148552 1971. - 1973.

11165552 23384148 01148552

LM165552 LM384148 LM148552

7.5L 455" ENG. 4 SPD.

1971. - 1976.

#3 Clutch Pattern

LM361675 LM384161 LM161675

NOTE: O.E. CLUTCH DISC MAY BE 11-1/2" Pressure Plate : CF360010 Disc : 381017 PP & Disc : -

#2 Clutch Pattern

LM361675 LM384161 LM161675

5.7L 350" ENG. LS1 11360010 23384148 01017010

LM360010 LM384148 LM017010

5.7L 350" ENG. LS1

6.0L ENG. LS2

12

NOTE: THIS APPLICATION REQUIRES CENTERFORCE FLYWHEEL - SEE FLYWHEEL SECTION Pressure Plate : 11369010 Disc : DF382612 23382612 PP & Disc : DF395010 01395010

-

N1716 53026 43002 4.22 IN/OZ N1716 53026 43001 4.22 IN/OZ N1716 53026 43002 7.5 IN/OZ

#2 Clutch Pattern

1-1/8"-26

0 IN/OZ

#14 Clutch Pattern

12

4.22 IN/OZ

N1716 53026 43002

700142 900142

NOTE: w/ HIGH BOOST FORCED INDUCTION AND/OR 125+ NITROUS. O.E. CLUTCH DISC MAY BE 11-1/2" Pressure Plate : 11369010 Disc : DF382612 23382612 PP & Disc : DF395010 01395010 2005. - 2006

1-1/8"-26 700610 -

11 DF381488 DF017010

1-1/8"-26 700600 -

10.4 11361739 23384161 01161739

1-1/8"-26 700600 -

10.4

6.6L 400" ENG. NEW! 1977. NOTE: w/ 26 SPLINE TRANS, 2.490 DIA CRANK REGISTER. Pressure Plate : CF361675 CFT361675 Disc : 384161 384161 DF384161 PP & Disc : DF161675

2004. - 2005.

#3 Clutch Pattern

-

6.6L 400" ENG.

NOTE: w/ 26 SPLINE TRANS, 2.750" DIA. CRANK REGISTER, 4.22 IN/OZ BAL. Pressure Plate : CF361675 CFT361675 11361739 Disc : 384161 384161 DF384161 23384161 PP & Disc : DF161675 01161739

2004. - 2005.

700600 -

12

NOTE: 12" HEAVY DUTY UPGRADE, 2.750" DIA. CRANK REGISTER 4.22 IN/OZ BAL Pressure Plate : Disc : DF382612 PP & Disc : DF612909 -

1-1/8"-26

1-1/8"-26 700142 900142 #14 Clutch Pattern

1-1/8"-26 700142 900142 #14 Clutch Pattern

53026 43001 0 IN/OZ 53026 43001 0 IN/OZ 53026 43001

LE MANS FROM 1976 6 CYLINDER 1977. - 1978. Pressure Plate : Disc : PP & Disc :

3.8L 231" ENG. CF361874 383271 -

1979. Pressure Plate : Disc : PP & Disc :

3.8L 231" ENG. CF361675 383271 -

10.4 CFT361874 383271 -

DF383271 DF271874

-

CFT361675 383271 -

DF383271 DF271675

11361739 23383271 01271739

CFT361874 383271 -

DF383271 DF271874

-

-

1-1/8"-10 # Clutch Pattern

10.4 LM361675 LM383271 LM271675

1-1/8"-10 # Clutch Pattern

N1086 53010 N1716 53010 43002

8 CYLINDER 1979. Pressure Plate : Disc : PP & Disc :

4.3L 260" ENG. CF361874 383271 -

1979. Pressure Plate : Disc : PP & Disc :

4.9L 301" ENG. CF361675 383271 -

10.4

CFT361675 383271 -

DF383271 DF271675

11361739 23383271 01271739

-

1-1/8"-10 # Clutch Pattern

10.4 LM361675 LM383271 LM271675

1-1/8"-10 # Clutch Pattern

N1086 53010 N1716 53010 43002

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

136

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Dual Friction DF Disc DF PP & Disc

CFT361874 383271 -

DF383271 DF271874

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Counterbalance T.O.B. Align Tool Pilot Bearing

PONTIAC PHOENIX 6 CYLINDER

1978. Pressure Plate : Disc : PP & Disc :

3.8L 231" ENG. CF361874 383271 -

1979. Pressure Plate : Disc : PP & Disc :

3.8L 231" ENG. CF361675 383271 -

10.4

CFT361675 383271 -

-

DF383271 DF271675

11361739 23383271 01271739

-

1-1/8"-10 # Clutch Pattern

10.4 LM361675 LM383271 LM271675

1-1/8"-10 # Clutch Pattern

10.4

1-1/8"-10

N1086 53010 N1716 53010 43001

8 CYLINDER 1978.

5.0L 305" ENG.

NOTE: 2.750" DIA. CRANK REGISTER 4.22 IN/OZ BAL Pressure Plate : CF361874 CFT361874 Disc : 383271 383271 DF383271 PP & Disc : DF271874 5.0L 305" ENG. NEW! 1978. NOTE: 2.490" DIA. CRANK REGISTER Pressure Plate : CF361874 CFT361874 Disc : 383271 383271 PP & Disc : 1979.

-

-

700600 #2 Clutch Pattern

10.4 DF383271 DF271874

-

-

700610 #2 Clutch Pattern

5.0L 305" ENG.

10.4

NOTE: 2.750" DIA. CRANK REGISTER 4.22 IN/OZ BAL Pressure Plate : CF361675 CFT361675 Disc : 383271 383271 DF383271 PP & Disc : DF271675 5.0L 305" ENG. NEW! 1979. NOTE: 2.490" DIA. CRANK REGISTER Pressure Plate : CF361675 CFT361675 Disc : 383271 383271 PP & Disc : -

11361739 23383271 01271739

1-1/8"-10

LM361675 LM383271 LM271675

700600 #2 Clutch Pattern

10.4 DF383271 DF271675

11361739 23383271 01271739

LM361675 LM383271 LM271675

DF201074

-

-

1-1/8"-10

1-1/8"-10 700610 #2 Clutch Pattern

4.22 IN/OZ N1086 53010 7.5 IN/OZ N1086 53010 4.22 IN/OZ N1716 53010 43001 7.5 IN/OZ N1716 53010 43001

SUNFIRE 4 CYLINDER 1995. Pressure Plate : Disc : PP & Disc :

2.3L 140" ENG. CF360074 * 381042 -

1995. - 1999. Pressure Plate : Disc : PP & Disc :

2.2L 135" ENG. CF360072 * 384204 -

1996. - 1999. Pressure Plate : Disc : PP & Disc :

2.4L 143" ENG. CF360074 * 381042 -

2000. - 2002. Pressure Plate : Disc : PP & Disc :

2.2L 134" ENG. SOHC CF330713 *

2000. - 2002.

9 -

# Clutch Pattern

8-1/2 -

DF204072

-

*

-

-

DF201074

-

*

-

-

*

-

2.4L 146" ENG. 5 SPD. -

*

-

2.2L 134" ENG. DOHC

NOTE: VIN F Pressure Plate : Disc : PP & Disc : CF331156

*

DF561133

-

# Clutch Pattern

*

-

53014 53014 53014 INCLUDED INCLUDED -

1"-14 -

9 -

1"-14 # Clutch Pattern

9-1/8 DF140833

1"-14 # Clutch Pattern

8-7/16 DF130733

1"-14 # Clutch Pattern

9

NOTE: INCLUDES SLAVE CYLINDER Pressure Plate : Disc : PP & Disc : CF008514 * 2002. - 2005.

*

1"-14 -

INCLUDED INCLUDED -

1"-14 # Clutch Pattern

INCLUDED INCLUDED -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

137

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Dual Friction DF Disc DF PP & Disc

Counterbalance T.O.B. Align Tool Pilot Bearing

PONTIAC VIBE 4 CYLINDER

2003. - 2008. Pressure Plate : Disc : PP & Disc :

1.8L ENG. 5 & 6 SPD. CF035549 *

212 DF549035

*

-

*

11191198 23191198 01191198

8-3/8 -

15/16"-21 # Clutch Pattern

840 50012 -

PORSCHE 911 1965. - 1969. Pressure Plate : Disc : PP & Disc :

2.0L 911 ,E,T -

1970. - 1971. Pressure Plate : Disc : PP & Disc :

2.2L 911E,S,T -

1972. - 1977.

2.4L 911E,S,T

215 -

DF191198

-

DF200192

NOTE: ALUMINUM HAT OPTION (9.5 lbs.) Pressure Plate : Disc : PP & Disc : -

DF991002

-

*

-

-

*

-

-

NOTE: ALUMINUM HAT OPTION (9.5 lbs.) Pressure Plate : Disc : PP & Disc : -

DF991002

*

-

*

-

-

3.0L CARRERA & 911SC

225

NOTE: CAST IRON HAT OPTION (12.7 lbs.) Pressure Plate : Disc : PP & Disc : -

DF200199

NOTE: ALUMINUM HAT OPTION (9.5 lbs.) Pressure Plate : Disc : PP & Disc : -

DF991002

*

-

-

*

-

-

3.2L CARRERA

225

NOTE: CAST IRON HAT OPTION (12.7 lbs.) Pressure Plate : Disc : PP & Disc : -

DF200199

NOTE: ALUMINUM HAT OPTION (9.5 lbs.) Pressure Plate : Disc : PP & Disc : -

DF991002

NOTE: UPGRADED TO COIL SPRING HUB DESIGN Pressure Plate : Disc : PP & Disc : DF252252

*

-

*

-

240

-

*

# Clutch Pattern

# Clutch Pattern

# Clutch Pattern

# Clutch Pattern

# Clutch Pattern

INCLUDED 50020 -

50020 INCLUDED 50020 -

50020 INCLUDED 50020 -

3/4"-20 # Clutch Pattern

# Clutch Pattern

-

50020 -

3/4"-20 -

9-7/16

-

3/4"-20 -

8-7/8

-

3.3L 911 TURBO w/930 TRANS.

# Clutch Pattern

8-7/8

-

3/4"-20 -

8-7/8

-

1"-24 # Clutch Pattern

8-7/8

225 DF200199

1987. - 1988.

*

2.7L CARRERA RS

NOTE: CAST IRON HAT OPTION (12.7 lbs.) Pressure Plate : Disc : PP & Disc : -

1984. - 1986.

-

1"-24 # Clutch Pattern

8-7/8

225 DF200199

1976. - 1983.

*

8-1/2 -

225

NOTE: CAST IRON HAT OPTION (12.7 lbs.) Pressure Plate : Disc : PP & Disc : -

1973. - 1976.

*

50020 INCLUDED 50020 -

1"-23 # Clutch Pattern

52008 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

138

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Dual Friction DF Disc DF PP & Disc

Counterbalance T.O.B. Align Tool Pilot Bearing

PORSCHE 911 - Continued 1987. - 1989.

3.2 CARRERA, COUPE, TARGA, CABRIO, SPEEDSTER

240

NOTE: UPGRADED TO COIL SPRING HUB DESIGN Pressure Plate : Disc : PP & Disc : DF021015 1989.

-

3.6L CARRERA 4,COUP

1991. - 1992.

DF068049

*

-

-

*

3.6L 911 TURBO w/DMF

NOTE: SOLID DISC HUB Pressure Plate : Disc : PP & Disc : -

DF793049

2.0L 912E, 923 -

-

DF191198

1970. - 1972. Pressure Plate : Disc : PP & Disc :

2.0L 914-6 -

-

DF191198

1970. - 1975. Pressure Plate : Disc : PP & Disc :

1.7L 914-4 -

1970. - 1975. Pressure Plate : Disc : PP & Disc :

1.8L 914-4 -

1973. - 1976. Pressure Plate : Disc : PP & Disc :

2.0L 914-4 -

-

DF191198

2.0L 924 -

-

DF117198

*

-

*

11191198 23191198 01191198

*

11191198 23191198 01191198

# Clutch Pattern

-

# Clutch Pattern

-

52008 -

1"-23 -

9-7/16

52008 -

1"-23 -

9-7/16

240

-

# Clutch Pattern

-

52008 -

1"-23 -

9-7/16

240 DF793049

# Clutch Pattern

-

-

1"-23 -

9-7/16

240

3.3L 911 TURBO 5 SPD w/DMF

NOTE: SOLID DISC HUB Pressure Plate : Disc : PP & Disc : 1993. - 1997.

-

3.6L CARRERA 2 & 4, COUP,

NOTE: TARGA, CABRIO w/DMF SOLID DISC HUB Pressure Plate : Disc : PP & Disc : -

240

NOTE: UPGRADED TO COIL SPRING HUB DESIGN. Pressure Plate : Disc : PP & Disc : DF021044 1990. - 1992.

9-7/16

52008 -

1"-23 # Clutch Pattern

52008 -

912 1976. Pressure Plate : Disc : PP & Disc :

215

* *

8-1/2 -

1"-24 # Clutch Pattern

50062 -

914 215

* *

8-1/2 -

215 -

DF191198

*

11191198 23191198 01191198

* *

-

DF191198

*

11191198 23191198 01191198

* *

-

*

*

-

* *

1"-24 # Clutch Pattern

8-1/2 -

215 11191198 23191198 01191198

# Clutch Pattern

8-1/2

215

1"-24 -

1"-24 # Clutch Pattern

8-1/2 -

1"-24 # Clutch Pattern

50062 50062 50062 50062 -

924 1976. - 1985. Pressure Plate : Disc : PP & Disc : 1979. - 1985.

215

2.0L 924 TURBO w/ENG. CODE 31.01/02/04

8-1/2 -

225

NOTE: UPGRADED TO COIL SPRING HUB DESIGN Pressure Plate : CFT360200 Disc : 380944 PP & Disc : DF200944

-

1"-24 # Clutch Pattern

8-7/8 -

-

1"-23 # Clutch Pattern

52008 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

139

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Dual Friction DF Disc DF PP & Disc

Counterbalance T.O.B. Align Tool Pilot Bearing

PORSCHE 930

1975. - 1977. Pressure Plate : Disc : PP & Disc : 1978. - 1979.

3.0L 930 TURBO CARRERA -

240 DF255255

-

*

3.3L 930 TURBO w/930 TRANS

3.3L 930 TURBO 5 SPD. -

9-7/16 -

240 -

-

*

DF793252

-

*

# Clutch Pattern

-

# Clutch Pattern

-

52008 -

1"-23 -

9-7/16

52008 -

1"-23 -

9-7/16

240

1"-23 # Clutch Pattern

9-7/16

240

NOTE: UPGRADED TO COIL SPRING HUB DESIGN Pressure Plate : Disc : PP & Disc : DF252252 1991. Pressure Plate : Disc : PP & Disc :

*

3.3L 930 TURBO w/930 TRANS

NOTE: UPGRADED TO COIL SPRING HUB DESIGN. Pressure Plate : Disc : PP & Disc : DF252252 1987. - 1988.

-

1"-23 # Clutch Pattern

52008 52008 -

944 1981. - 1988.

2.5L 944,944S

225

NOTE: UPGRADED TO COIL SPRING HUB DESIGN Pressure Plate : CF360298 * Disc : 380944 PP & Disc : DF298944 1986. - 1990. Pressure Plate : Disc : PP & Disc : 1989.

2.5L 944 TURBO -

*

240

-

DF248248

-

2.7L 944

*

3.0L 944 S2

-

-

1"-23 # Clutch Pattern

8-7/8

225

NOTE: UPGRADED TO COIL SPRING HUB DESIGN Pressure Plate : CF360784 * Disc : 380944 PP & Disc : DF784778

# Clutch Pattern

-

-

1"-23 -

9-7/16

225

NOTE: UPGRADED TO COIL SPRING HUB DESIGN. Pressure Plate : CF360298 * Disc : 380944 PP & Disc : DF298944 1989. - 1991.

-

8-7/8

# Clutch Pattern

-

52008 -

1"-23 -

8-7/8

52008 -

52008 -

1"-23 # Clutch Pattern

52008 -

993 1995. - 1997.

3.6L 993 TURBO & NON-TURBO w/DMF

NOTE: SOLID DISC HUB Pressure Plate : Disc : PP & Disc : -

-

240 DF793049

-

*

9-7/16 -

1"-23 # Clutch Pattern

52008 -

SATURN ION 2004. - 2007.

2.0L RED LINE SUPERCHARGED

9-1/8"

NOTE: REPLACES OE CLUTCH & INCLUDES ALUMINUM CENTERFORCE FLYWHEEL. Pressure Plate : Disc : PP & Disc : DF010249 01010249 * *

-

NEW! 2004. - 2007. 2.0L RED LINE SUPERCHARGED NOTE: REPLACEMENT PARTS FOR DF010249 & 01010249. REQUIRES CENTERFORCE FLYWHEEL. Pressure Plate : Disc : PP & Disc : DF201249 01201249 * *

1"-14 # Clutch Pattern

9-1/8"

1"-14 900149 # Clutch Pattern

ZERO -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

140

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Dual Friction DF Disc DF PP & Disc

Counterbalance T.O.B. Align Tool Pilot Bearing

SATURN SATURN 4 CYLINDER

1991. - 1999. Pressure Plate : Disc : PP & Disc :

1.9L 116" ENG. SC, SL & SW SERIES CF360115 * 380115 DF115115

2000. - 2002. Pressure Plate : Disc : PP & Disc :

1.9L 116" ENG. S - SERIES -

2000. - 2003. Pressure Plate : Disc : PP & Disc :

2.2L 134" ENG. L - SERIES -

8-1/2 -

*

-

# Clutch Pattern

8-1/2 DF027022

-

*

-

*

-

-

*

-

-

*

11905018 23500100 01905018

*

-

*

-

*

11947483 23947483 01947483

*

-

*

11947483 23947483 01947483

*

11947483 23947483 01947483

15/16"-22 # Clutch Pattern

9 DF162141

15/16"-22 -

1"-14 # Clutch Pattern

N1765 53001 N1765 53001 -

VUE 4 CYLINDER 2002. - 2005. Pressure Plate : Disc : PP & Disc :

2.2L 134" ENG. -

9 -

DF162141

*

-

DF905018

1.5L ENG. CF035549 *

-

DF549035

1.6L 1600 EA71 ENG. -

DF504330

2.5L ENG. NON TURBO -

DF947483

1"-14 # Clutch Pattern

-

SCION tC 2005. - 2007. Pressure Plate : Disc : PP & Disc :

2.4L tC CF018905

236

* *

9-1/4 -

1-1/8"-21 700838 #12 Clutch Pattern

0 IN/OZ -

xA,xB 2003. - 2006. Pressure Plate : Disc : PP & Disc :

212

8-3/8 -

15/16"-21 # Clutch Pattern

840 50012 -

SUBARU 1600 DL, GL 1976. - 1981. Pressure Plate : Disc : PP & Disc :

200

7-7/8 -

3/4"-23 # Clutch Pattern

045 -

BAJA 2003. - 2006. Pressure Plate : Disc : PP & Disc :

225

* *

8-7/8 -

1"-24 # Clutch Pattern

904 50090 -

BRAT 1976. - 1981. Pressure Plate : Disc : PP & Disc :

1.6L & 1.8L BRAT 4WD EA71/81 ENG. DF504330

200

7-7/8 -

3/4"-23 # Clutch Pattern

045 -

FORESTER 1998. - 2006. Pressure Plate : Disc : PP & Disc :

2.5L ENG. NON TURBO -

DF947483

225

2.2L ENG. -

DF947483

* *

8-7/8 -

1"-24 # Clutch Pattern

904 50090 -

IMPREZA 1993. - 2001. Pressure Plate : Disc : PP & Disc :

225 -

* *

8-7/8 -

1"-24 # Clutch Pattern

904 50090 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

141

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Dual Friction DF Disc DF PP & Disc

Counterbalance T.O.B. Align Tool Pilot Bearing

SUBARU IMPREZA - Continued

1994. - 1995. Pressure Plate : Disc : PP & Disc :

1.8L ENG. 4WD ONLY -

1996. - 1997. Pressure Plate : Disc : PP & Disc :

1.8L ENG. 2 & 4WD. -

1996. - 2005.

225 DF947483

*

11947483 23947483 01947483

*

8-7/8 -

225 -

DF947483

*

11947483 23947483 01947483

2.0L ENG. WRX TURBO SDN. & WGN.

NOTE: PULL TYPE CLUTCH 5 SPD TRANS. Pressure Plate : Disc : PP & Disc : 1998. - 2006. Pressure Plate : Disc : PP & Disc :

2.5L ENG. RS NON TURBO -

2002. Pressure Plate : Disc : PP & Disc :

3.0L ENG. -

2003. - 2009.

*

* *

-

-

*

225

DF947483

*

11947483 23947483 01947483

* *

DF947483

*

11947483 23947483 01947483

2.5L WRX STI TURBO

* *

NOTE: PULL-TYPE CLUTCH 6 SPD TRANS Pressure Plate : Disc : PP & Disc : -

DF012628

-

*

1"-24 # Clutch Pattern

8-7/8 -

1"-24 # Clutch Pattern

8-7/8 -

240

1"-24 # Clutch Pattern

9

225 -

# Clutch Pattern

8-7/8

230 DF012124

1"-24 -

1"-24 # Clutch Pattern

9-7/16 -

1"-24 # Clutch Pattern

904 50090 904 50090 INCLUDED INCLUDED INCLUDED 904 50090 904 50090 INCLUDED INCLUDED INCLUDED

LEGACY 1991. - 1995.

2.2L ENG. TURBO

NOTE: PULL-TYPE CLUTCH Pressure Plate : Disc : PP & Disc : 1997. - 2006. Pressure Plate : Disc : PP & Disc :

225 -

DF012124

2.5L & 3.0L ENG. NON TURBO -

DF947483

1995. - 2001. Pressure Plate : Disc : PP & Disc :

2.2L ENG. -

DF947483

1997. - 2006. Pressure Plate : Disc : PP & Disc :

2.5L & 3.0L ENG. NON TURBO -

-

*

8-7/8 -

225

*

11947483 23947483 01947483

*

11947483 23947483 01947483

* *

1"-24 # Clutch Pattern

8-7/8 -

1"-24 # Clutch Pattern

INCLUDED INCLUDED INCLUDED 904 50090 -

OUTBACK 225 -

* *

8-7/8 -

225 DF947483

*

11947483 23947483 01947483

* *

1"-24 # Clutch Pattern

8-7/8 -

1"-24 # Clutch Pattern

904 50090 904 50090 -

SUZUKI ESTEEM 1995. - 2002. Pressure Plate : Disc : PP & Disc :

1.6L ESTEEM CF005059

-

DF059005

-

190

1.3L SAMURAI CF009512

-

DF512009

-

7-1/2 -

3/4"-18 # Clutch Pattern

N1745 -

SAMURAI 1986. - 1995. Pressure Plate : Disc : PP & Disc :

190

7-1/2 -

7/8"-20 # Clutch Pattern

580 50047 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

142

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Dual Friction DF Disc DF PP & Disc

-

DF512009

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Counterbalance T.O.B. Align Tool Pilot Bearing

SUZUKI SIDEKICK

1988. - 1992. Pressure Plate : Disc : PP & Disc : 1989. - 1991.

1.3L SIDEKICK CF009512

190 -

1.6L SIDEKICK 2 DR

7-1/2 -

215

NOTE: O.E. CLUTCH DISC MAY BE 7-7/8" DIA. Pressure Plate : Disc : PP & Disc : CF020517 -

DF517020

-

1991. Pressure Plate : Disc : PP & Disc :

1.6L SIDEKICK 4 DR CF021519

1992. - 1998. Pressure Plate : Disc : PP & Disc :

1.6L SIDEKICK 2 & 4 DR CF021519 -

1996. - 1998. Pressure Plate : Disc : PP & Disc :

1.8L SIDEKICK & SIDEKICK SPORT CF021519 -

DF519021

-

1.3L SWIFT CF005059

DF059005

-

1.6L ENG. VITARA & GRAND VITARA CF021519 DF519021

-

1.6L X-90 CF021519

-

DF519021

-

-

# Clutch Pattern

-

-

7/8"-20 # Clutch Pattern

8-1/2 -

215

7/8"-20 -

8-1/2

215 DF519021

# Clutch Pattern

8-1/2

215

7/8"-20 -

7/8"-20 # Clutch Pattern

8-1/2 -

7/8"-20 # Clutch Pattern

580 50047 580 50047 580 50047 580 50047 580 50047 -

SWIFT 1989. - 2001. Pressure Plate : Disc : PP & Disc :

190 -

7-1/2 -

3/4"-18 # Clutch Pattern

N1745 -

VITARA 1999. - 2002. Pressure Plate : Disc : PP & Disc :

215

8-1/2 -

7/8"-20 # Clutch Pattern

580 50047 -

X-90 1996. - 1998. Pressure Plate : Disc : PP & Disc :

215 -

DF519021

-

1987.12 - 1991. Pressure Plate : Disc : PP & Disc :

2.0L 3SFE ENG. 4WD CF018900 *

DF900018

11905018 23500100 01905018

1988.08 - 1991. Pressure Plate : Disc : PP & Disc :

2.5L 2VZ-F V6 ENG. CF018900 *

1992. - 2001. Pressure Plate : Disc : PP & Disc :

2.2L 5SFE ENG. CF031517 *

8-1/2 -

7/8"-20 # Clutch Pattern

580 50047 -

TOYOTA CAMRY

3.0L V6 ENG. CF018905 *

*

* *

9-1/4 -

236 -

DF900018

*

11905018 23500100 01905018

* *

-

DF517031

*

11517010 23517031 01517031

*

-

*

-

DF905018

*

11905018 23500100 01905018

*

-

*

-

DF905018

*

11905018 23500100 01905018

* *

1-1/8"-20 # Clutch Pattern

9-1/4 -

236

1-1/8"-21 # Clutch Pattern

8-7/8

236

1-1/8"-21 # Clutch Pattern

9-1/4

224

1992.05 - 1993.05 3.0L 3VZFE ENG. V6 Pressure Plate : Disc : PP & Disc : CF018905 * 1997. - 2001. Pressure Plate : Disc : PP & Disc :

236

1-1/8"-21 # Clutch Pattern

9-1/4 -

1-1/8"-21 # Clutch Pattern

446 50011 446 50011 442 446 50011 446 50011 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

143

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Dual Friction DF Disc DF PP & Disc

-

DF900018

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Counterbalance T.O.B. Align Tool Pilot Bearing

TOYOTA CAMRY - Continued

2002. - 2006. Pressure Plate : Disc : PP & Disc :

2.4L ENG. CF018900 *

236

*

11905018 23500100 01905018

* *

9-1/4 -

1-1/8"-21 # Clutch Pattern

446 50011 -

CELICA 1971.09 - 1974.08 2.0L 18RC ENG. Pressure Plate : Disc : PP & Disc : CF010517 CFT517010 1974.09 - 1977.07 2.2L 20R ENG. Pressure Plate : Disc : PP & Disc : CF010517

224 DF517010

11517010 23517010 01517010

8-7/8 -

224 CFT517010

DF517010

11517010 23517010 01517010

1977.08 - 1980.08 2.2L 20R ENG. Pressure Plate : Disc : PP & Disc : CF010517

CFT517010

DF517010

11517010 23517010 01517010

1980.08 - 1985.07 2.4L 22R ENG. Pressure Plate : Disc : PP & Disc : CF010517

CFT517010

DF517010

11517010 23517010 01517010

-

1989.09 - 1990.04 2.2L GT,GTS 5 SFE ENG. Pressure Plate : Disc : PP & Disc : CF031517 * 1989.09 - 1991.05 1.6L ST 4AFE ENG. Pressure Plate : Disc : PP & Disc : CF035542

8-7/8

*

11905018 23500100 01905018

* *

-

224 DF517031

*

11517010 23517031 01517031

* *

-

2.0L 4WD 3SGTE ENG.TURBO CF018905 *

1990.05 - 1999. Pressure Plate : Disc : PP & Disc :

2.2L GT,GTS 5 SFE ENG. CF031517 *

DF542035

-

DF905018

*

11905018 23500100 01905018

-

*

DF517031

*

11517010 23517031 01517031

*

-

*

-

1994 - 1998. Pressure Plate : Disc : PP & Disc :

1.8L 7AFE ENG. CF035542

2000. - 2005. Pressure Plate : Disc : PP & Disc :

1.8L 1ZZFE & 2ZZGE ENG. CF035542 -

DF542035

-

-

-

DF542035

-

-

DF542035

-

DF515008

-

15/16"-21 # Clutch Pattern

8-3/8 -

212

1-1/8"-20 # Clutch Pattern

8-3/8

212

1-1/8"-21 # Clutch Pattern

8-7/8

212

15/16"-21 # Clutch Pattern

9-1/4

224

1-1/8"-20 # Clutch Pattern

8-3/8 -

*

1-1/8"-21 # Clutch Pattern

8-7/8

236

1-1/8"-21 700830 800830 #25 Clutch Pattern

9-1/4

212

1989.09 - 1993. Pressure Plate : Disc : PP & Disc :

1991.06 - 1993.08 1.6L ST 4AFE ENG. Pressure Plate : Disc : PP & Disc : CF035542

DF900018

1-1/8"-21 700830 800830 #25 Clutch Pattern

236

1-1/8"-21 #25 Clutch Pattern

8-7/8

224

1987.08 - 1989.08 2.0L 4WD 3SGTE ENG.TURBO Pressure Plate : Disc : PP & Disc : CF018900 *

# Clutch Pattern

8-7/8

224

1-1/8"-21 -

15/16"-21 # Clutch Pattern

8-3/8 -

15/16"-21 # Clutch Pattern

005 50011 005 50011 0 IN/OZ 201 50011 0 IN/OZ 201 50011 446 50011 354 371 50012 446 50011 442 840 50012 840 50012 840 50012 -

COROLLA 1970.09 - 1977.08 1.6L 2TC ENG. Pressure Plate : Disc : PP & Disc : CF008515

200 CFT515008

7-7/8 -

15/16"-21 # Clutch Pattern

010 50012 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

144

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Dual Friction DF Disc DF PP & Disc

Counterbalance T.O.B. Align Tool Pilot Bearing

TOYOTA COROLLA - Continued

1977.09 - 1979.08 1.6L 2TC ENG. Pressure Plate : Disc : PP & Disc : CF008515

200 CFT515008

1979.09 - 1982.08 1.8L 3TC ENG. 5 SPD Pressure Plate : Disc : PP & Disc : CF008515 CFT515008 1980.09 - 1982.08 1.8L 3TC ENG. 4 SPD Pressure Plate : Disc : PP & Disc : CF009501 1984.08 - 1989.07 1.6L GTS 4AGE ENG. Pressure Plate : Disc : PP & Disc : CF025523 1985.09 - 1987.07 Pressure Plate : Disc : PP & Disc :

1.6L DL, LE 4ALC ENG. -

1987.08 - 1991.05 1.6L 4AFE ENG. NON-GTS Pressure Plate : Disc : PP & Disc : CF020553 * 1989. - 1992. Pressure Plate : Disc : PP & Disc :

1.6L 4AF ENG. GTS CF035542

-

1991.05 - 1992.08 1.6L 4AFE ENG. NON-GTS Pressure Plate : Disc : PP & Disc : CF020553 * 1.6L 4AFE ENG. CF035542

1992.06 - 1997. Pressure Plate : Disc : PP & Disc :

1.8L 7AFE ENG. CF035542

1998. - 2008.

-

7-7/8 -

200 DF515008

-

212

DF501009

-

DF523025

-

-

DF523020

-

-

DF553020

-

-

*

DF542035 DF542035

-

-

DF553020

-

-

*

-

DF542035

-

-

-

DF542035

-

-

1.8L COROLLA w/ 1ZZFE ENG.

NOTE: INCLUDES XRS, 5 & 6 SPEED. Pressure Plate : Disc : PP & Disc : CF035542 -

DF542035

-

DF517010

11517010 23517010 01517010

15/16"-21 # Clutch Pattern

8-3/8 -

212

15/16"-21 # Clutch Pattern

8-3/8

212

15/16"-21 # Clutch Pattern

7-7/8

212

15/16"-21 # Clutch Pattern

8-3/8

200

15/16"-21 # Clutch Pattern

8-3/8

212

15/16"-21 # Clutch Pattern

7-7/8 -

-

15/16"-21 # Clutch Pattern

7-7/8

200

15/16"-21 # Clutch Pattern

7-7/8

200

15/16"-21 # Clutch Pattern

8-3/8

200

15/16"-21 # Clutch Pattern

7-7/8

212

1989.09 - 1991.06 1.6L GTS 4AGE ENG. Pressure Plate : Disc : PP & Disc : CF035542 -

1992.06 - 1997. Pressure Plate : Disc : PP & Disc :

DF515008

15/16"-21 # Clutch Pattern

8-3/8 -

15/16"-21 # Clutch Pattern

201 50012 201 50012 201 50012 371 50012 371 50012 371 50012 371 50012 840 50012 442 50012 840 50012 840 50012 840 50012 -

CORONA 1971.09 - 1974.08 2.0L 18RC ENG. Pressure Plate : Disc : PP & Disc : CF010517 CFT517010 1974.09 - 1978.08 2.2L 20R ENG. Pressure Plate : Disc : PP & Disc : CF010517

224

8-7/8 -

224 CFT517010

DF517010

11517010 23517010 01517010

1-1/8"-21 # Clutch Pattern

8-7/8 -

1-1/8"-21 #25 Clutch Pattern

005 50011 005 50011 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

145

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Dual Friction DF Disc DF PP & Disc

CFT517010

DF517010

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Counterbalance T.O.B. Align Tool Pilot Bearing

TOYOTA CORONA - Continued

1978.09 - 1980.08 2.2L 20R ENG. Pressure Plate : Disc : PP & Disc : CF010517 1980.09 - 1981.12 2.4L 22R ENG. Pressure Plate : Disc : PP & Disc : CF010517

224 11517010 23517010 01517010

8-7/8 -

224 CFT517010

DF517010

11517010 23517010 01517010

1984.08 - 1987.07 2.8L CRESSIDA Pressure Plate : Disc : PP & Disc : CF018522 CFT522018

DF522018

11522018 23500100 01522018

DF549035

-

1-1/8"-21 700830 800830 #25 Clutch Pattern

8-7/8 -

1-1/8"-21 700830 800830 #25 Clutch Pattern

0 IN/OZ 201 50011 0 IN/OZ 201 50011 -

CRESSIDA 236

9-1/4 -

1-1/8"-21 # Clutch Pattern

201 50011 -

ECHO 2000. - 2005. Pressure Plate : Disc : PP & Disc :

1.5L ENG. CF035549 *

212 -

*

8-3/8 -

15/16"-21 # Clutch Pattern

840 50012 -

MATRIX 2002. - 2008. Pressure Plate : Disc : PP & Disc :

1.8L MATRIX w/ 1ZZFE ENG. 5 & 6 SPD. CF035542 DF542035

212 -

8-3/8 -

15/16"-21 # Clutch Pattern

840 50012 -

MR-2 1984.12 - 1985.06 Pressure Plate : Disc : PP & Disc : 1985.07 - 1990. Pressure Plate : Disc : PP & Disc :

1.6L 4 AGELC ENG. -

200 -

1.6L 4 AGELC ENG. GT CF035542 -

1990.01 - 1990.05 2.2L 5S-FE ENG. Pressure Plate : Disc : PP & Disc : CF084907 *

DF523020

-

7-7/8 -

212 DF542035

-

-

1990.01 - 1995. Pressure Plate : Disc : PP & Disc :

2.0L 3S-GTE ENG.TURBO CF018905 *

1990.06 - 1995. Pressure Plate : Disc : PP & Disc :

2.2L 5S-FE ENG. CF084907 *

2000. - 2005. Pressure Plate : Disc : PP & Disc :

1.8L SPYDER CF035549 *

DF907084

*

11907084 23517031 01907084

-

* *

*

11905018 23500100 01905018

*

-

*

-

DF907084

*

11907084 23517031 01907084

*

-

*

-

DF549035

*

-

*

-

1-1/8"-21 # Clutch Pattern

8-7/8 -

212

1-1/8"-20 # Clutch Pattern

9-1/4

224

15/16"-21 # Clutch Pattern

8-7/8

236 DF905018

# Clutch Pattern

8-3/8

224

15/16"-21 -

1-1/8"-20 # Clutch Pattern

8-3/8 -

15/16"-21 # Clutch Pattern

371 50012 371 50012 354 446 50011 442 840 50012 -

PASEO 1991.04 - 1999. Pressure Plate : Disc : PP & Disc :

1.5L PASEO 5E-FE ENG. CF020553 *

200 DF553020

7-7/8 -

15/16"-21 # Clutch Pattern

371 50012 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

146

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Dual Friction DF Disc DF PP & Disc

-

DF517031

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Counterbalance T.O.B. Align Tool Pilot Bearing

TOYOTA SOLARA

1999. - 2001. Pressure Plate : Disc : PP & Disc :

2.2L SOLARA CF031517 *

1999. - 2001. Pressure Plate : Disc : PP & Disc :

3.0L V6 SOLARA CF018905 *

2002. - 2006. Pressure Plate : Disc : PP & Disc :

2.4L ENG CF018900 *

224

*

11517010 23517031 01517031

* *

8-7/8 -

236 -

DF905018

*

11905018 23500100 01905018

* *

-

DF900018

*

11905018 23500100 01905018

* *

# Clutch Pattern

9-1/4 -

236

1-1/8"-20 1-1/8"-21 # Clutch Pattern

9-1/4 -

1-1/8"-21 # Clutch Pattern

442 446 50011 446 50011 -

SUPRA 1979. - 1980. Pressure Plate : Disc : PP & Disc :

2.6L SUPRA 4 ME ENG. CF010517 CFT517010

DF517010

11517010 23517010 01517010

1980.09 - 1981.08 2.8L SUPRA 5 ME ENG. Pressure Plate : Disc : PP & Disc : CF010517 CFT517010

DF517010

11517010 23517010 01517010

1981.09 - 1985.12 2.8L SUPRA 5 ME-GE ENG. Pressure Plate : Disc : PP & Disc : CF018522 CFT522018 1986.01 - 1988. Pressure Plate : Disc : PP & Disc : 1986.04 - 1992.08

11522018 23500100 01522018

CFT522018

DF500100

-

-

11500100 23500100 01500100

DF522018

-

11522018 23500100 01522018

DF510150

*

11510150 23510150 01510150

*

-

# Clutch Pattern

-

* *

1-1/8"-21 -

9-1/4

250

1-1/8"-21 # Clutch Pattern

9-1/4

236

1-1/8"-21 # Clutch Pattern

9-1/4

236

1-1/8"-21 # Clutch Pattern

9-1/4 -

11522018 23500100 01522018

3.0L SUPRA TWIN TURBO 6 SPD. PULL-TYPE CLUTCH

NOTE: SOLID HUB Pressure Plate : Disc : PP & Disc : -

8-7/8

236

3.0L SUPRA 7MGE ENG. NON-TURBO

NOTE: 5 SPD. Pressure Plate : Disc : PP & Disc : CF018522 1993. - 1998.

DF522018

1-1/8"-21 # Clutch Pattern

236

3.0L SUPRA TURBO 7 MGTE ENG. -

8-7/8 -

224

3.0L SUPRA 7 MGE ENG. NON-TURBO CF018522 CFT522018 DF522018

NOTE: PULL-TYPE CLUTCH Pressure Plate : Disc : PP & Disc : CF100500 1989. - 1998.

224

1-1/8"-21 # Clutch Pattern

9-3/4 -

1-1/4"-14 # Clutch Pattern

201 50011 201 50011 201 50011 201 50011 419 50011 50011 -

TERCEL 1986.08 - 1990. Pressure Plate : Disc : PP & Disc :

1.5L TERCEL 3E NON-EZ CF432551 *

1991. - 1993. Pressure Plate : Disc : PP & Disc :

1.5L TERCEL 3E-E 5 SPD CF432551 *

1991. - 1994. Pressure Plate : Disc : PP & Disc :

1.5L TERCEL 3E-E 4 SPD CF020553 *

200 DF551432

7-7/8 -

200 DF551432

-

*

DF553020

-

*

# Clutch Pattern

7-7/8 -

200

15/16"-21 15/16"-21 # Clutch Pattern

7-7/8 -

15/16"-21 # Clutch Pattern

371 50012 371 50012 371 50012 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

147

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Dual Friction DF Disc DF PP & Disc

Counterbalance T.O.B. Align Tool Pilot Bearing

TOYOTA TERCEL - Continued

1995. - 1999. Pressure Plate : Disc : PP & Disc :

1.5L TERCEL 5E-FE CF020553 *

-

DF553020

200

1.5L ENG. CF035549 *

-

DF549035

*

-

*

-

7-7/8 -

15/16"-21 # Clutch Pattern

371 50012 -

YARIS 2006 - 2009 Pressure Plate : Disc : PP & Disc :

212

8-3/8 -

15/16"-21 # Clutch Pattern

840 50012 -

TOYOTA LIGHT TRUCKS, SUV & VAN FJ CRUISER 2007. - 2009. Pressure Plate : Disc : PP & Disc :

4.0L 6 SPEED -

276 CFT240098

DF240098

-

DF518043

-

10 7/8 -

1-1/8"-21 # Clutch Pattern

-

LAND CRUISER 1974.08 - 1987. Pressure Plate : Disc : PP & Disc : 1980. - EOP.

4.2L LAND CRUISER CF043518 4.2L FJ60 ENG.

NOTE: (EXPORT ONLY) Pressure Plate : Disc : PP & Disc : 1992. - 1993.

275 -

275 -

DF518098

-

*

4.5L FJ 80 ENG.

NOTE: (EXPORT ONLY) Pressure Plate : Disc : PP & Disc : -

10-13/16 -

-

DF519080

# Clutch Pattern

10-13/16 -

298 -

1-1/8"-10 1-1/8"-21 # Clutch Pattern

11-3/4 -

046 046 50011 -

1"-14

-

-

-

# Clutch Pattern

PICK UPS & 4RUNNER (ALSO SEE: TACOMA, T-100, TUNDRA) 1971.09 - 1978. Pressure Plate : Disc : PP & Disc :

2.0L 18RC ENG. CF010517 CFT517010

1974.09 - 1978.08 2.2L 20R ENG. Pressure Plate : Disc : PP & Disc : CF010517

224 DF517010

11517010 23517010 01517010

8-7/8 -

224 CFT517010

1978.09 - 1980.08 2.2L 20R ENG. 2WD. Pressure Plate : Disc : PP & Disc : CF010517 CFT517010 1979.01 - 1980.06 2.2L 20R ENG. 4WD Pressure Plate : Disc : PP & Disc : CF010517 CFT517010 1980.08 - 1988.07 2.4L 22R & 22RE ENG. 2 & 4WD Pressure Plate : Disc : PP & Disc : CF010517 CFT517010 1985.08 - 1988.05 2.4L 22R-TE TURBO ENG. Pressure Plate : Disc : PP & Disc : CF018522 CFT522018

DF517010

11517010 23517010 01517010

DF517010

-

11517010 23517010 01517010

-

11517010 23517010 01517010

DF517010

-

11517010 23517010 01517010

DF522018

11522018 23500100 01522018

1-1/8"-21 700830 800830 #25 Clutch Pattern

8-7/8 -

236

1-1/8"-21 700830 800830 #25 Clutch Pattern

8-7/8

224

1-1/8"-21 #25 Clutch Pattern

8-7/8

224 DF517010

# Clutch Pattern

8-7/8

224

1-1/8"-21 -

1-1/8"-21 700830 800830 #25 Clutch Pattern

9-1/4 -

1-1/8"-21 # Clutch Pattern

005 50011 005 50011 0 IN/OZ 201 50011 0 IN/OZ 005 50011 0 IN/OZ 201 50011 201 50011 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

148

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Dual Friction DF Disc DF PP & Disc

Counterbalance T.O.B. Align Tool Pilot Bearing

TOYOTA LIGHT TRUCKS, SUV & VAN PICK UPS & 4RUNNER (ALSO SEE: TACOMA, T-100, TUNDRA) - Continued

1987.11 - 1996. Pressure Plate : Disc : PP & Disc :

3.0L 3VZE V-6 ENG. CF110501

236 -

1988.08 - 1992.07 2.4L 22RE ENG. 2 & 4WD Pressure Plate : Disc : PP & Disc : CF010517 CFT517010

DF501110

-

9-1/4 -

224 DF517010

1992.08 - 1996. Pressure Plate : Disc : PP & Disc :

2.4L 22RE ENG. 2WD ONLY CF010517 CFT517010

1992.08 - 1996. Pressure Plate : Disc : PP & Disc :

2.4L 22RE ENG. 4WD ONLY CF018522 CFT522018

1996. - 2000. Pressure Plate : Disc : PP & Disc :

2.7L 3RZFE ENG. 4RUNNER CF120505 -

1996. - 2002. Pressure Plate : Disc : PP & Disc :

3.4L 5VZFE V6 ENG. 2 & 4WD 4RUNNER CF019505 DF505019

11517010 23517010 01517010

DF517010

-

11517010 23517010 01517010

-

11522018 23500100 01522018

-

-

1-1/8"-21 700834 #21 Clutch Pattern

10 -

1-1/8"-21 700836 #20 Clutch Pattern

250 -

1-1/8"-21 700830 800830 #25 Clutch Pattern

9-1/4

250 DF505120

1-1/8"-21 700830 800830 #25 Clutch Pattern

8-7/8

236 DF522018

# Clutch Pattern

8-7/8

224

1-1/8"-21 700832 -

10 -

1-1/8"-21 # Clutch Pattern

0 IN/OZ 590 50011 0 IN/OZ 590 50011 0 IN/OZ 590 50011 0 IN/OZ 590 50011 0 IN/OZ 444 50011 50011 -

RAV4 1996. - 2005. Pressure Plate : Disc : PP & Disc :

2.0L RAV4 3SFE ENG. CF018900 *

NEW! 2004. - 2005. 2.4L 2AZFE ENG. Pressure Plate : Disc : PP & Disc : CF018905 *

236 DF900018

*

11905018 23500100 01905018

* *

9-1/4 -

236 -

DF905018

*

11905018 23500100 01905018

1-1/8"-21 # Clutch Pattern

9-1/4 -

1-1/8"-21 #12 Clutch Pattern

446 50011 446 50011 -

TACOMA, T-100, TUNDRA 1992.08 - 1994.08 3.0L 3VZE V-6 ENG. 2WD ONLY Pressure Plate : Disc : PP & Disc : CF110501 1992.08 - 1994.08 3.0L 3VZE V-6 ENG. 4WD ONLY Pressure Plate : Disc : PP & Disc : CF120505 1993.10 - 2002. Pressure Plate : Disc : PP & Disc :

2.7L 3RZFE ENG. CF120505

1994.08 - 2004. Pressure Plate : Disc : PP & Disc :

3.4L 5VZFE V-6 ENG. 2 & 4WD CF019505 -

1995. - 2004. Pressure Plate : Disc : PP & Disc :

2.4L 2RZFE ENG. 2WD ONLY CF018522 CFT522018

2001. - 2004. Pressure Plate : Disc : PP & Disc :

2.4L ENG. 4WD ONLY CF120505 -

236 DF501110

-

9-1/4 -

#12 Clutch Pattern

250 DF505120

-

10 -

DF505120

-

10 -

-

10 -

236 DF522018

11522018 23500100 01522018 -

1-1/8"-21 # Clutch Pattern

9-1/4 -

250 DF505120

1-1/8"-21 700836 #20 Clutch Pattern

250 DF505019

1-1/8"-21 # Clutch Pattern

250 -

1-1/8"-21 700832 -

1-1/8"-21 # Clutch Pattern

10 -

1-1/8"-21 # Clutch Pattern

0 IN/OZ 590 50011 590 50011 0 IN/OZ 444 50011 50011 444 50011 444 50011 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

149

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Dual Friction DF Disc DF PP & Disc

Counterbalance T.O.B. Align Tool Pilot Bearing

TOYOTA LIGHT TRUCKS, SUV & VAN TACOMA, T-100, TUNDRA - Continued

NEW! 2003. - 2004. 2.7L 3RZFE ENG. Pressure Plate : Disc : PP & Disc : CF120505 2005. - 2009. Pressure Plate : Disc : PP & Disc :

2.7L 2TRFE ENG. CF120505

2005. - 2009. Pressure Plate : Disc : PP & Disc :

4.0L 6 SPEED -

250 -

DF505120

-

10 -

#20 Clutch Pattern

250 -

DF505120

-

10 -

276 CFT240098

DF240098

-

1983.08 - 1985.08 2.0L VAN,WGN 3Y ENG. Pressure Plate : Disc : PP & Disc : CF010517 CFT517010

DF517010

11517010 23517010 01517010

1985.08 - 1988.08 2.2L VAN,WGN 4Y ENG. Pressure Plate : Disc : PP & Disc : CF010517 CFT517010

DF517010

11517010 23517010 01517010

1-1/8"-21 1-1/8"-21 # Clutch Pattern

10 7/8 -

1-1/8"-21 # Clutch Pattern

444 50011 444 50011 -

VAN

1988.09 - 1990. Pressure Plate : Disc : PP & Disc :

2.2L VAN, WGN 4Y ENG. CF010517 CFT517010

224

8-7/8 -

224

DF517010

11517010 23517010 01517010

DF138138

-

# Clutch Pattern

8-7/8 -

224

1-1/8"-21 1-1/8"-21 # Clutch Pattern

8-7/8 -

1-1/8"-21 # Clutch Pattern

201 50011 201 50011 444 50011 -

VOLKSWAGEN BEETLE 1998. - 2005. Pressure Plate : Disc : PP & Disc : 1999. - 2004.

2.0L BEETLE GAS ENG. -

215

*

1.8L TURBO AWV ENG ONLY NON-S w/ 5 SPD

8-7/16 -

7/8"-28 # Clutch Pattern

228

9

NOTE: FROM CHASSIS 1C142001. CLUTCH UPGRADE - MUST USE 1989-91 228mm CORRADO G60 FLYW. Pressure Plate : Disc : PP & Disc : DF038047 *

7/8"-28 # Clutch Pattern

N8031 50096 N8031 -

CABRIO 1995. - 2002. Pressure Plate : Disc : PP & Disc :

2.0L CABRIO -

210 -

DF087110

*

-

*

-

-

7/8"-28 # Clutch Pattern

N3758 50096 -

CORRADO 1989. - 1991. Pressure Plate : Disc : PP & Disc :

1.8L G60, PG ENG. SUPERCHARGED DF786780

1992. - 1995. Pressure Plate : Disc : PP & Disc :

2.8L CORRADO VR6 6 CYL. ENG. -

DF023052

1.8L GOLF 8-VALVE GAS ENG. -

DF295296

228

9 -

# Clutch Pattern

228

*

-

*

-

7/8"-28 -

9 -

7/8"-28 # Clutch Pattern

N8031 N8031 50096 -

GOLF 1985. - 1992. Pressure Plate : Disc : PP & Disc :

210

8-1/4 -

13/16"-24 # Clutch Pattern

N3758 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

150

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Dual Friction DF Disc DF PP & Disc

Counterbalance T.O.B. Align Tool Pilot Bearing

VOLKSWAGEN GOLF - Continued

1987. - 1993. Pressure Plate : Disc : PP & Disc : 1987. - 1993.

1.8L GOLF 16-VALVE GAS ENG. -

1995. - 2002.

-

2.0L GOLF GTI -

*

-

210 DF670668

-

*

DF087110

*

-

# Clutch Pattern

1.9L GOLF TDI -

1999. Pressure Plate : Disc : PP & Disc :

2.0L GOLF AEG ENG. -

1999. Pressure Plate : Disc : PP & Disc :

2.0L GOLF w/ ABA ENG. -

-

-

*

DF786780

-

-

*

DF138138

# Clutch Pattern

-

-

*

-

-

*

1.8L TURBO ENG. INCLUDING GTI w/5 SPD ONLY

9 -

215

NOTE: ALL EXCEPT 2004 AZG ENG. Pressure Plate : Disc : PP & Disc : -

DF138138

*

-

*

-

7/8"-28 # Clutch Pattern

228

2.0L GOLF

7/8"-28 # Clutch Pattern

-

NOTE: CLUTCH UPGRADE - MUST USE 1989-91 228mm CORRADO G60 FLYW. Pressure Plate : Disc : PP & Disc : DF038047 *

7/8"-28 # Clutch Pattern

8-7/16

210 DF087110

7/8"-28 -

9

215

7/8"-28 # Clutch Pattern

9

228 -

7/8"-28 -

228 DF023052

7/8"-28 # Clutch Pattern

8-1/4 -

-

2.8L GOLF VR6 6 CYL. ENG.

1996. - 1997. Pressure Plate : Disc : PP & Disc :

2000. - 2006.

8-1/4 -

210

NOTE: GTI, AAA, AFP ENG Pressure Plate : Disc : PP & Disc : -

2000. - 2006.

-

2.0L GOLF 16 VALVE 9A ENG.

NOTE: GAS ENG. Pressure Plate : Disc : PP & Disc : 1995. - 1999. Pressure Plate : Disc : PP & Disc :

210 DF670668

7/8"-28 # Clutch Pattern

8-7/16 -

7/8"-28 # Clutch Pattern

N3758 50096 N3758 50096 N3758 50096 N8031 50096 N8031 50096 N8031 50096 N3758 50096 N8031 N8031 50096 -

JETTA 1984. - 1992. Pressure Plate : Disc : PP & Disc :

1.8L JETTA 8-VALVE GAS ENG. -

1987. - 1989. Pressure Plate : Disc : PP & Disc :

1.8L JETTA 16-VALVE GAS ENG. -

1990. - 1992. Pressure Plate : Disc : PP & Disc :

2.0L JETTA 16-VALVE GAS -

1993. - 1994.

210 DF295296

8-1/4 -

210 DF670668

-

*

DF670668

-

-

*

2.0L JETTA III -

DF670668

-

*

7/8"-28 # Clutch Pattern

8-1/4 -

210

NOTE: TO CHASSIS # IHR028789 Pressure Plate : Disc : PP & Disc : -

# Clutch Pattern

8-1/4

210

13/16"-24 -

7/8"-28 # Clutch Pattern

8-1/4 -

7/8"-28 # Clutch Pattern

N3758 N3758 50096 N3758 50096 N3758 50096 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

151

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Dual Friction DF Disc DF PP & Disc

Counterbalance T.O.B. Align Tool Pilot Bearing

VOLKSWAGEN JETTA - Continued 1993. - 2004.

2.8L JETTA VR6 6 CYL. ENG.

NOTE: AAA, & AFP ENG Pressure Plate : Disc : PP & Disc : 1994. - 1999.

-

DF023052

-

*

2.0L JETTA

1996. - 1999. Pressure Plate : Disc : PP & Disc :

1.9L JETTA TDI -

1999. Pressure Plate : Disc : PP & Disc :

2.0L JETTA AEG ENG. -

1999. Pressure Plate : Disc : PP & Disc :

2.0L JETTA w/ ABA ENG. -

-

DF087110

-

*

# Clutch Pattern

-

DF786780

-

*

# Clutch Pattern

9 -

215 DF138138

-

*

-

-

*

1.8L TURBO ENG. w/5 SPD

-

NOTE: ALL EXCEPT 2004 AZG ENG. Pressure Plate : Disc : PP & Disc : -

DF138138

*

-

*

-

7/8"-28 # Clutch Pattern

9 -

215

7/8"-28 # Clutch Pattern

-

228

2.0L JETTA GL, GLS

7/8"-28 # Clutch Pattern

8-7/16

210 DF087110

7/8"-28 -

228 -

7/8"-28 -

-

NOTE: CLUTCH UPGRADE - MUST USE 1989-91 228mm CORRADO G60 FLYW. Pressure Plate : Disc : PP & Disc : DF038047 * 2000. - 2005.

9

210

NOTE: FROM CHASSIS # IHR028790 Pressure Plate : Disc : PP & Disc : -

2000. - 2005.

228

7/8"-28 # Clutch Pattern

8-7/16 -

7/8"-28 # Clutch Pattern

N8031 50096 N3758 50096 N8031 50096 N8031 50096 N3758 50096 N8031 N8031 50096 -

PASSAT 1989. - 1997. Pressure Plate : Disc : PP & Disc :

2.0L PASSAT INC. 16-VALVE -

1992. - 1997. Pressure Plate : Disc : PP & Disc :

2.8L PASSAT VR6 6 CYL ENG. -

1996. - 1997. Pressure Plate : Disc : PP & Disc :

1.9L PASSAT TDI -

1998. - 2005.

9 -

DF023052

-

*

9 -

DF786780

-

*

-

2.8L PASSAT AHA,ATQ ENG. 30 V -

9 -

-

*

9 -

240 DF228202

-

*

7/8"-28 # Clutch Pattern

225 DF205189

7/8"-28 # Clutch Pattern

228 -

7/8"-28 # Clutch Pattern

228

1.8L PASSAT TURBO, DMF

NOTE: SOLID DISC HUB Pressure Plate : Disc : PP & Disc : 1998. - 2005. Pressure Plate : Disc : PP & Disc :

228 DF786780

15/16"-23 # Clutch Pattern

9-7/16 -

15/16"-23 # Clutch Pattern

N8031 50096 N8031 50096 N8031 50096 100 100 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

152

(928) 771-8322

(Fax)


CENTERFORCE 2012 CATALOG Year Pressure Plate : Disc : PP & Disc :

Application CF I CF Disc CF I PP & Disc

CF II CF Disc CF II PP & Disc

Size Metric Size Inches Spline DFX LMC Series Steel Flywheel DFX Disc LMC Disc Aluminum Flywheel DFX PP & Disc LMC PP & Disc Clutch Pattern

Dual Friction DF Disc DF PP & Disc

Counterbalance T.O.B. Align Tool Pilot Bearing

VOLKSWAGEN QUANTUM

1983. - 1985. Pressure Plate : Disc : PP & Disc :

1.8L QUANTUM GAS ENG. -

DF295296

210

1974. - 1980. Pressure Plate : Disc : PP & Disc :

1.5L RABBIT GAS ENG. -

DF886183

1974. - 1980. Pressure Plate : Disc : PP & Disc :

1.6L RABBIT GAS ENG. -

*

-

*

-

8-1/4 -

13/16"-24 # Clutch Pattern

-

RABBIT

1980. - 1984.

190

190 DF886183

-

*

1.7L RABBIT EUROPEAN PROD.

NOTE: GAS ENG. Pressure Plate : Disc : PP & Disc : -

-

7-1/2 -

DF886183

1982. - 1990. Pressure Plate : Disc : PP & Disc :

1.8L RABBIT 8-VALVE GAS ENG. -

-

1982. - 1990. Pressure Plate : Disc : PP & Disc :

1.8L RABBIT GTI 8-VALVE ENG. -

1984. - 1992. Pressure Plate : Disc : PP & Disc :

1.8L RABBIT CABRIOLET -

1986. - 1990. Pressure Plate : Disc : PP & Disc :

1.8L RABBIT GTI 16-VALVE ENG. -

DF670668

1975. - 1980. Pressure Plate : Disc : PP & Disc :

1.5L SCIROCCO GAS ENG. -

DF886183

1980. - 1985. Pressure Plate : Disc : PP & Disc :

1.7L SCIROCCO GAS ENG. -

1983. - 1989. Pressure Plate : Disc : PP & Disc :

1.8L SCIROCCO 8-VALVE ENG. -

1985. - 1989. Pressure Plate : Disc : PP & Disc :

1.8L SCIROCCO 16-VALVE ENG. -

-

*

-

-

*

DF295296

*

-

-

*

*

-

*

-

13/16"-24 # Clutch Pattern

8-1/4 -

210

13/16"-24 # Clutch Pattern

8-1/4

210 DF295296

# Clutch Pattern

-

-

13/16"-24 -

8-1/4

210

13/16"-24 # Clutch Pattern

7-1/2

210 DF295296

# Clutch Pattern

7-1/2

190

13/16"-24 -

13/16"-24 # Clutch Pattern

8-1/4 -

7/8"-28 # Clutch Pattern

N3758 N3758 N3758 N3758 N3758 N3758 N3758 50096 -

SCIROCCO 190

7-1/2 -

190 DF886183

-

*

DF295296

-

-

*

-

*

13/16"-24 # Clutch Pattern

8-1/4 -

210 DF670668

# Clutch Pattern

7-1/2

210

13/16"-24 -

13/16"-24 # Clutch Pattern

8-1/4 -

7/8"-28 # Clutch Pattern

N3758 N3758 N3758 N3758 50096 -

* - DOES NOT HAVE CENTERFORCE WEIGHTS DUE TO BELLHOUSING CLEARANCE THE CLUTCH AND FLYWHEEL SPECIFICATIONS LISTED WITHIN THIS CATALOG ARE TO THE BEST OF OUR KNOWLEDGE, DUE TO O.E.M. VARIANCES AND/OR PRODUCTION TOLERANCES - CENTERFORCE CANNOT BE HELD LIABLE FOR INCEDENTAL DESCREPENCIES. FOR APPLICATIONS WITHOUT A CENTERFORCE T.O. (RELEASE) BEARING LISTED USE ORIGINAL EQUIPMENT (FACTORY) BEARING.

(928) 771-8422 (Voice)

153

(928) 771-8322

(Fax)


FLYWHEELS CARS & TRUCKS APPLICATION

RING GEAR COUNTER TEETH BALANCE

STEEL PART#

STEEL WEIGHT

ALUM PART#

ALUM WEIGHT

CLUTCH PATTERN

RING GEAR O.D.

ACURA 1.7L & 1.8L DOHC 1992-01 INTEGRA

112

NO

700900

13.8

800900

7.1

13

11.330

2.2L & 2.3L SOHC 1997-1999 CL

119

NO

700908

14.9

-

-

20

12.050

5.0L 304", 5.9L 360" ENG. UP TO 1971 164 4.500" DIA. CRANK REGISTER. 10.4" or 11" CLUTCH

YES

700710

35.0

-

-

2,3

13.830

6.0L 390" ENG. UP TO 1971 164 YES 4.500" DIA. CRANK REGISTER 10.4" or 11" CLUTCH 25.0 IN/OZ. BAL

700720

35.0

-

-

2,3

13.830

6.6L 401" ENG. 1972 & UP 164 4.625" DIA. CRANK REGISTER 10.4" or 11" CLUTCH

YES

700730

35.0

-

-

2,3

13.830

3.8L 231" ENG 160 1977-87 EVEN-FIRE NON-TURBO ENG. ONLY FLAT FLYW.

YES

700010

29.0

-

-

2

13.420

6.6L 400", 7.0L 430" & 7.5L 455" ENG.

YES

700030

35.2

-

-

2,3

13.979

20.2

14

14.096

AMC

BUICK

166

CADILLAC 5.7L LS6 & 6.0L LS2 168 NO 900143 04-06 CTS-V REPLACES OE DUAL MASS FLYWHEEL. MUST USE CENTERFORCE CLUTCH. SEE CLUTCH SECTION

CHEVROLET 2.0L COBALT SS SUPERCHARGED 135 NO 2005-07 REPLACES OE AND REQUIRES CENTERFORCE CLUTCH ASSEMBLY. SEE CLUTCH SECTION.

900149

-

19

4.3L 262" V6 ENG. 153 1986-02 1pc REAR MAIN SEAL 23.4 IN/OZ BAL. 10.4" CLUTCH

NEW

YES

700170

30.1

900170

13.6

2

12.835

4.3L 262" V6 ENG. 168 YES 1986-02 1pc REAR MAIN SEAL 23.4 IN/OZ BAL. 10.4", 11" or 12" CLUTCH

700160

35.7

-

-

2,3

14.096

4.3L 265" thru 7.0L 427" ALL V8 (EXC. 400") 1955-85 2pc REAR MAIN SEAL 10.4" CLUTCH

700100

30.2

900100

16.0

2

12.835

4.3L 265" thru 7.0L 427" ALL V8 (EXC. 400") 168 NO 700120 36.3 1955-85 2pc REAR MAIN SEAL 10.4", 11" or 12" CLUTCH (ALUM. FLYW. 10.4" or 11" CLUTCH ONLY)

900120

15.6

2,3

14.096

4.3L 265" thru 7.0L 427" ALL V8 (EXC. 400") 168 NO 1955-85 2pc REAR MAIN SEAL STEEL & ALUM. FLYW. USE 11" or 12" CLUTCH.

153

NO

700120

36.3

900561

15.8

3

14.096

5.0L 305" & 5.7L 350" ENG. 153 YES 700170 1986-92 (PASS CAR) SM FLYW. 1pc REAR MAIN SEAL 23.4 IN/OZ BAL. 10.4" CLUTCH

31.0

900170

13.6

2

12.835

5.0L 305" & 5.7L 350" ENG. 168 YES 700160 35.7 1986-95 (O.E. TRUCKS) LG FLYW. 1pc REAR MAIN SEAL 23.4 IN/OZ BAL. 10.4", 11" or 12" CLUTCH.

-

-

2,3

14.096

5.0L 305" & 5.7L 350" ENG. 168 YES 700161 35.7 1996-00 (O.E. TRUCKS) LG FLYW. 1pc REAR MAIN SEAL 23.4 IN/OZ BAL. USE WITH 12" CLUTCH

-

-

3

14.096

5.7L 350" LT1 & LT4 ENG. CAMARO 6 SPD. 153 YES 700177 29.0 1993-97 1pc REAR MAIN SEAL 23.4 IN/OZ BAL. REPLACES O.E. FLYW. USE 11" PULL-TYPE CLUTCH

-

-

24

12.835

5.7L 350" L98, LT1 & LT4 ENG. CORVETTE 6 SPD 153 YES 700175 27.5 24 1989-96 1pc REAR MAIN 23.4 IN/OZ BAL. PULL-TYPE CLUTCH. SINGLE MASS REPLACING O.E. DUAL-MASS MAY CAUSE TRANS NOISE. SEE CLUTCH SECTION.

12.835

5.7L 350" LS1 & LS6 ENG. 168 NO 700142 29.7 900142 13.1 14 1998-04 CAMARO & CORVETTE REPLACES O.E. FLYW. USE 11" or 12" CENTERFORCE CLUTCH. SEE CLUTCH LISTINGS. ALSO FITS O.E. 11.5" CLUTCH

14.096

6.0L LIGHT TRUCK 168 NO 700142 01-06 REPLACES OE FLYWHEEL AND MUST USE CENTERFORCE CLUTCH ASSEMBLY

29.7

900142

13.1

14

14.096

900143

20.2

14

14.096

6.0L LS2 OE DMF 168 NO 900143 07 CORVETTE REPLACES OE DUAL MASS FLYW. MUST USE CENTERFORCE CLUTCH SEE CLUTCH LISTINGS.

20.2

14

14.096

6.0L LS2, 6.2L LS3 & 7.0L LS7 ENG. 168 NO 700142 29.7 2005-08 CORVETTE REPLACES OE FLYW. MUST USE 12" CENTERFORCE CLUTCH SEE CLUTCH LISTINGS.

900142

13.1

14

14.096

6.2L LS3 ENG. 168 NO 700142 29.7 2010 REPLACES OE FLYW. MUST USE CENTERFORCE CLUTCH ASSEMBLY SEE CLUTCH LISTINGS

900142

13.1

14

14.096

6.0L LS2 ENG OE DMF 168 NO 05-06 SSR REPLACES OE DUAL MASS FLYW. MUST USE CENTERFORCE CLUTCH SEE CLUTCH LISTINGS.

NOTE: For clutch pattern dimensions please see listing at the end of the flywheel section ( pg - 160) NOTE: All Centerforce counter balanced flywheels are rough balanced. SOME ALUMINUM FLYWHEELS ARE SPECIAL ORDER ITEMS PLEASE CALL FOR AVAILABILITY.

155


FLYWHEELS CARS & TRUCKS APPLICATION

RING GEAR COUNTER TEETH BALANCE

STEEL PART#

STEEL WEIGHT

ALUM PART#

ALUM WEIGHT

CLUTCH PATTERN

RING GEAR O.D.

700102

29.9

-

13.6

2

12.835

6.6L 400" 1970-85 or 383" STROKER 168 YES 700180 36.1 2pc REAR MAIN SEAL 24.4 IN/OZ BAL. 10.4", 11" or 12" CLUTCH (ALUM. FLYW. 10.4" or 11" CLUTCH ONLY)

-

18.0

2,3

14.096

7.4L 454" ENG. 168 YES 700140 35.9 1970-90 2pc REAR MAIN SEAL. 33.0 IN/OZ BAL. USE 11" or 12" CLUTCH (ALUM. FLYW. 11" CLUTCH ONLY)

900140

16.0

3

14.096

7.4L 454" ENG. 168 YES 700145 36.3 1991- 95 O.E. TRUCKS w/CAST CRANK 1pc REAR MAIN SEAL / LG. FLANGE. 42.5 IN/OZ BAL. USE 11" or 12" CLUTCH

-

2,3

14.096

7.4L 454" ENG. 168 YES 700146 36.3 1996-00 O.E. TRUCKS w/CAST CRANK. 1pc REAR MAIN SEAL / LG. FLANGE 42.5 IN/OZ BAL. USE 12" CLUTCH

-

3

14.096

CHEVROLET 6.6L 400" 1970-85 or 383" STROKER 153 2pc REAR MAIN SEAL 24.4 IN/OZ BAL. 10.4" CLUTCH

YES

-

CHEVROLET - SPECIAL APPLICATIONS 1989-96 CORVETTE w/6 SPD TRANS V8 ENG 153 YES 700174 27.0 24 TO 1986 (2pc REAR MAIN) w/400 CRANK or 383" STROKER. PULL-TYPE. 24.4 IN/OZ BAL. SINGLE-MASS FLYW. MAY CAUSE TRANS NOISE. SEE CLUTCH SECTION

12.835

1989-96 CORVETTE w/6 SPD TRANS V8 ENG 153 NO 700105 27.0 24 UP TO 1986 (2pc. REAR MAIN SEAL) EXC 400/454 ENG. PULL-TYPE CLUTCH SINGLE-MASS FLYW. MAY CAUSE TRANS NOISE. SEE CLUTCH SECTION

12.835

1993-97 CAMARO w/6 SPD TRANS V8 ENG 153 NO 700107 MFG BEFORE 1986 (2pc REAR MAIN SEAL) EXC. 400/454 ENG. USE 11" PULL-TYPE CLUTCH

29.3

-

1993-97 CAMARO w/6 SPD TRANS V8 ENG MFG 153 YES 700173 29.0 BEFORE 1986 (2pc REAR MAIN SEAL) 24.4 IN/OZ BAL. w/ 400 CRANK: 400" or 383" STROKER USE 11" PULL-TYPE CLUTCH

-

24

12.835

-

24

12.835

2,3

14.096

4.3L 262", 5.0L 305", 5.7L 350", 6.3L 383" & 385" 168 NO 700162 35.7 1986-00 ENG. USE W/ AFTERMARKET ZERO BALANCE CRANKSHAFT ONLY! 1pc. REAR MAIN. 10.4", 11" or 12" CLUTCH 5.7L 350" HO, RAM JET & ZZ4 153 YES GM CRATE ENG. 1pc REAR MAIN SEAL 23.4 IN/OZ BAL. 10.4" CLUTCH

700170

31.1

900170

13.6

2

12.835

5.7L 350" HO, RAM JET & ZZ4 168 YES 700160 GM CRATE ENG. 1pc REAR MAIN SEAL 23.4 IN/OZ BAL. 10.4", 11" or 12" CLUTCH

35.7

-

-

2,3

14.096

6.2L 376" & 7.4L 454" LSA & LSX, 8 BOLT CRANK

168

NO

700144

29.7

-

-

14

14.096

6.3L 383" HT, ZZ383 & 385" FAST BURN 153 YES GM CRATE ENG. 1pc REAR MAIN SEAL 23.4 IN/OZ BAL. 10.4" CLUTCH

700170

31.0

900170

13.6

2

12.835

6.3L 383" HT, ZZ383 & 385" FAST BURN 168 YES 700160 GM CRATE ENG. 1pc REAR MAIN SEAL 23.4 IN/OZ BAL. 10.4", 11" or 12" CLUTCH

35.7

-

-

2,3

14.096

7.4L 454" HO ZZ454 & 8.2L 502" HO ZZ502 168 YES 700148 36.3 2,3 GM CRATE ENG 91 & UP GM CRATE ENG. GEN V & VI 41.7 IN/OZ BAL. w/FORGED CRANK 1pc. REAR MAIN SEAL / LG. FLANGE USE 11" or 12" CLUTCH

14.096

9.4L 572" ZZ572 GM CRATE ENG. STEEL & ALUM. FLYW. USE 12" CLUTCH.

168

NO

700120

36.3

900561

15.8

3

14.096

5.2L 318" ENG. 1964-92 10.4" CLUTCH

130

NO

700400

29.3

900400

12.2

2

13.195

5.2L 318" ENG. 1964-92 10.4" or 11" CLUTCH

143

NO

700420

36.3

-

14.9

2,3

14.568

5.6L 340", 6.3L 383" & 7.2L 440" ENG. 130 1964-78 6 BOLT CRANK 10.4" or 10.95" CLUTCH - HEAVY FLYW.

NO

700410

37.8

-

-

2

13.195

5.6L 340", 6.3L 383" & 7.2L 440" ENG. 143 1958-78 6 BOLT CRANK 10.4", 10.95" or 11" CLUTCH

NO

700420

36.3

-

14.9

2,3

14.568

5.6L 340", 6.3L 383", 6.6L 400" & 7.2L 440" ENG. 1964-78 6 BOLT CRANK 10.4" or 10.95" CLUTCH

130

NO

700400

29.3

900400

12.2

2

13.195

5.9L 360" ENG 1971-92 10.4" CLUTCH

130

YES

700460

28.8

-

-

2

13.195

5.9L 360" ENG 1971-92 10.4" or 11" CLUTCH

143

YES

700450

36.1

-

-

2,3

14.568

CHRYSLER / DODGE / PLYMOUTH

5.9L TURBO DIESEL ENG. (EXC. H.O. ENG) 152 NO 400151 61.5 22, 23 1994-03 RAM w/5 SPD. 1999-02 RAM w/6 SPD. USE 12-1/4" CLUTCH. CAST IRON O.E. REPLACEMENT FLYWHEEL - NOT SFI APPROVED FOR COMPETITION.

15.625

5.9L TURBO DIESEL H.O. ENG. 152 NO 400147 61.5 2001-06 RAM w/ NV 6 SPD. TRANS USE 13" CLUTCH. CAST IRON O.E. REPLACEMENT - NOT SFI APPROVED FOR COMPETITION.

15.625

23

NOTE: For clutch pattern dimensions please see listing at the end of the flywheel section ( pg - 160) NOTE: All Centerforce counter balanced flywheels are rough balanced. SOME ALUMINUM FLYWHEELS ARE SPECIAL ORDER ITEMS PLEASE CALL FOR AVAILABILITY.

156

NEW


FLYWHEELS CARS & TRUCKS APPLICATION

RING GEAR COUNTER TEETH BALANCE

STEEL PART#

STEEL WEIGHT

ALUM PART#

ALUM WEIGHT

CLUTCH PATTERN

RING GEAR O.D.

-

2,3

14.568

CHRYSLER / DODGE / PLYMOUTH 6.4L 392", 7.0L 426" & 7.2L 440" ENG. 143 NO 700440 36.2 1963-72 HEMI & WEDGE ENG w/8 BOLT CRANK 10.95" & 11" CLUTCH (FLYW. LOCATES ON CRANK LIP - NOT ON FLANGE OD)

CHRYSLER / DODGE / PLYMOUTH - SPECIAL APPS 5.9L 360" MAGNUM CRATE ENG. 130 1993-02 NON-COMPUTER CONTROLED ENG. ONLY 10.4" CLUTCH

YES

700470

30.0

-

-

2

13.195

5.9L 360" MAGNUM CRATE ENG. 143 YES 1993-02 NON-COMPUTER CONTROLED ENG ONLY 10.4" or 11" CLUTCH

700480

40.0

-

-

2,3

14.568

700310

22.0

-

-

1

11.293

221" V8 FLAT HEAD ENG. 112 NO 700340 32.2 1932-48 FITS 10" O.E. TYPE CLUTCH - 10.4" CENTERFORCE CLUTCH RECOMMENDED - SEE FORD CLUTCH LISTING.

16.0

2,4

14.162

239" V8 FLAT HEAD ENG. 112 NO 700360 27.2 900360 1949-53 FITS 10" O.E. TYPE CLUTCH - 10" or 10.4" CENTERFORCE CLUTCH RECOMMENDED - SEE FORD CLUTCH LISTING.

12.8

2,4

14.162

4.6L 280" ENG. 164 NO 700205 26.6 900205 12.7 7,18 1996-04 COBRA DOHC (8 BOLT CRANK) 10.4" or 11" MUSTANG CLUTCH. ALUM FLYW. REPLACES 2003-04 SUPERCHG O.E. FLYW, CABLE LINKAGE.

14.215

4.6L 280" ENG. 164 NO 700200 26.7 900200 1996-04 MUSTANG GT 8th Digit of the VIN# is "W" (6 BOLT CRANK) 10.4" or 11" MUSTANG CLUTCH,CABLE LINKAGE.

7,18

14.215

18

14.215

7,18

14.215

FORD / MERCURY 2.0L & 2.3L ENG. 1971-80 PINTO

135

NO

12.7

4.6L 280" ENG. 164 NO 700210 28.2 900210 13.5 2005-09 MUSTANG GT SOHC 3V ENG. w/ 6 BOLT O.E. CRANKSHAFT NOTE: CANNOT BE USED WITH O.E. CLUTCH, HYDRAULIC LINKAGE. 4.6L 280" ENG. 164 NO 700205 26.6 900205 1996-04 MUSTANG GT 8th Digit of the VIN# is "X" (8 BOLT CRANK) 10.4" or 11" MUSTANG CLUTCH, CABLE LINKAGE.

12.7

4.7L 289", 5.0L 302" & 5.8L 351" ENG. 157 YES 700220 23.3 900220 11.5 2,4 1963-79 PASS CAR 28 IN/OZ BAL. USE WITH 10" O.E. CLUTCH OR w/10.4" GM TYPE HD CENTERFORCE CLUTCH OPTION--SEE FORD CLUTCH SECTION.

13.294

4.7L 289", 5.0L 302" & 5.8L 351" ENG. 164 YES 700240 1963-79 PASS CAR & TRUCK ENG. 28 IN/OZ BAL LG. FLYW w/10" or 11" CLUTCH

4,5,8

14.215

5.0L 302" ENG 157 YES 700320 27.6 900320 11.9 1986-95 PASS CAR 50 IN/OZ BAL. 10.4" MUSTANG CLUTCH 1981-85 REQUIRES 10.4" UPGRADE SEE CLUTCH SEC. CALL FOR MORE INFO

7

13.294

5.0L 302" ENG 164 NO 700215 28.2 2011 32V 6 SPD MUSTANG - REQUIRES USE OF CENTERFORCE CLUTCH-SEE CLUTCH SECTION

900215

13.5

18

14.215

5.0L 302" ENG. 164 YES 1980-97 TRUCK ENG. 50 IN/OZ BAL. LG. FLYW. w/10" or 11" CLUTCH

900242

15.1

4,5,8

14.215

18

14.215

700242

34.2

34.1

900240

15.0

5.4L SUPERCHARGED GT500 & COBRA JET 164 NO 700215 28.2 900215 13.5 06-2010 REPLACES OE TWIN. REQUIRES CENTERFORCE CLUTCH - SEE FORD CLUTCH SECTION. 8 BOLT CRANK, HYDRAULIC LINKAGE. 5.8L 351" M & 6.6L 400" M ENG. 176 1977-82 ENG. 28 IN/OZ BAL. 11", 11.5" or 12" CLUTCH

YES

700290

37.0

-

-

3,6,8

15.520

5.9L 360", 6.4L 390" & 7.0L 427" ENG. 184 1963-74 Fe BIG BLOCK ENG's ZERO BAL. 11", 11.5" or 12" CLUTCH

NO

700260

29.5

900260

17.3

5,6,8

15.503

6.4L 390", 7.0L 429" & 7.5L 460" ENG. 176 1969-79 BIG BLOCK ENG's ZERO BAL. 11", 11.5" or 12" CLUTCH

NO

700280

40.5

-

-

5,6,8

15.520

7.0L 428" ENG. 184 1966-70 Fe BIG BLOCK 28 IN/OZ BAL. 11", 11.5" or 12" CLUTCH

YES

700270

29.0

900270

17.5

5,6,8

15.503

7.5L 460" ENG. 176 1979-1987.05 TRUCKS 24 IN/OZ BAL. 11", 11.5" or 12" CLUTCH

YES

700330

40.4

-

-

5,6,8

15.520

4.6L 280" ENG. 164 NO 700215 28.2 900215 13.5 2005-09 MUSTANG GT SOHC 3V ENG. w/ AFTERMARKET 8 BOLT CRANK. NOTE: CANNOT BE USED WITH O.E. CLUTCH, HYDRAULIC LINKAGE.

18

14.215

4.7L 289", 5.0L 302" & 5.8L 351" ENG. 157 YES 700221 1963-79 ENG. 28 IN/OZ BAL. FOR USE WITH 1981-95 PASS CAR T5 TRANS / 10.4" CLUTCH

23.3

-

-

7

13.294

4.7L 289", 5.0L 302" & 5.8L 351" ENG. 164 NO 1963-79 ENGINES w/ZERO BALANCE CRANK LG. FLYW. 10" or 11" CLUTCH

34.7

900230

13.7

4,5,8

14.215

2,7

13.294

FORD / MERCURY - SPECIAL APPLICATIONS

700230

4.7L 289", 5.0L 302" & 5.8L 351" ENG. ZERO BAL. 157 NO 700225 23.1 900232 12.0 1963-79 w/ 4SPD TRANS USE WITH 10.4" GM or 1981-95 T5 TRANS USE 10.4" MUSTANG CLUTCH FOR MORE INFO CALL TECH LINE.

NOTE: For clutch pattern dimensions please see listing at the end of the flywheel section ( pg - 160) NOTE: All Centerforce counter balanced flywheels are rough balanced. SOME ALUMINUM FLYWHEELS ARE SPECIAL ORDER ITEMS PLEASE CALL FOR AVAILABILITY.

157

NEW


FLYWHEELS CARS & TRUCKS APPLICATION

RING GEAR COUNTER TEETH BALANCE

STEEL PART#

STEEL WEIGHT

ALUM PART#

ALUM WEIGHT

CLUTCH PATTERN

RING GEAR O.D.

16

14.215

FORD / MERCURY - SPECIAL APPLICATIONS 5.0L 302" & 5.8L 351" ENG. 164 YES 700250-48 34.3 900250-48 14.7 1969-EOP PANTERA ONLY 28 IN/OZ BAL REQUIRES CENTERFORCE CLUTCH ASSEM. SEE FORD PANTERA CLUTCH LISTING.

HONDA 1.5L & 1.6L SOHC ENG. 1990-00 CIVIC, CIVIC WAGON, CRX & DEL-SOL

109

NO

700905

13.1

-

-

15

11.086

1.6L DOHC ENG 1994-00 CIVIC & DEL-SOL

112

NO

700900

13.8

800900

7.1

13

11.330

2.0L & 2.2L VTEC 6 SPD 2000.-2007

109

NO

700901

13.5

-

-

2.0L ENG. 1998 CR-V

112

NO

700900

13.8

800900

7.1

13

11.330

2.2L & 2.3L SOHC, DOHC & VTEC 1992-02 PRELUDE & 1990-02 ACCORD

119

NO

700908

14.9

-

-

20

12.050

4.0L ENG 164 NO 400469 1991-04 NODULAR CAST IRON FLYWHEEL. NOT SFI APPROVED FOR COMPETITION USE.

27.5

-

-

2

13.8

4.0L ENG 164 NO 400472 1987-90 NODULAR CAST IRON FLYWHEEL. NOT SFI APPROVED FOR COMPETITION USE.

27.5

-

-

2

13.8

4.2L ENG 164 NO 400472 1988-90 NODULAR CAST IRON FLYWHEEL. NOT SFI APPROVED FOR COMPETITION USE.

27.5

-

-

2

13.8

-

-

800826

9.1

9

11.750

700822

13.3

800822

9.3

10

11.750

NO

700920

16.5

-

-

26

11.535

3.8L 231" ENG 160 1975-79 EVEN-FIRE NON-TURBO ENG. ONLY FLAT FLYW.

YES

700010

29.0

-

-

2

13.420

5.4L 330", 6.6L 400" & 7.0L 425" 1964-67 ENG's 10.4" or 11" CLUTCH

166

YES

700510

31.3

-

-

2,3

13.979

5.7L 350", 6.6L 400" & 7.5L 455" 1968-73 ENG's 10.4" or 11" CLUTCH

166

YES

700500

30.6

-

-

2,3

13.979

1964-79 ALL V8 ENG. (EXC. 6.4L 389") 166 YES 2.750" DIA. CRANK REGISTER 10.4" or 11" CLUTCH 4.22 IN.OZ. BAL.

700600

30.6

-

-

2,3

13.979

1977-85 ALL V8 ENG. 2.490" CRANK REGISTER 10.4" or 11" CLUTCH

700610

30.1

2,3

13.979

700170

31.0

2

12.835

11.086

JEEP

MAZDA 1.6L ENG. 1989-93 MIATA USE WITH: 112 CF053581, DF581053 OR MAZDA COMP. P/N 0000-02-5403

NO

RX7 1981.07-91 NON-TURBO 12A & 13B ENG. 116 YES MAZDA RX7 FLYWHEELS REQUIRE AUTOMATIC TRANS. COUNTER BALANCE

MITSUBISHI 2.0L ENG. LANCER EVO VIII 114 2002-06 HIGH INERTIA FLYW. REPLACES O.E. FLYW.

OLDSMOBILE

PONTIAC

166

YES

5.0L 305" & 5.7L 350" ENG. 153 YES 1986-92 (PASS CAR) 1pc REAR MAIN SEAL 23.4 IN/OZ BAL. 10.4" CLUTCH

900170

13.6

5.7L 350" & 6.0L LS1 & LS2 ENG. 168 NO 700142 29.7 900142 15.5 14 1998-04 FIREBIRD, TA. 2004-06 GTO. REPLACES O.E. FLYW. USE 11" or 12" CENTERFORCE CLUTCH. SEE CLUTCH LISTINGS. ALSO FITS O.E. 11.5" CLUTCH

14.096

5.7L 350" LT1 & LT4 ENG. FIREBIRD & TA 6 SPD 153 YES 700177 29.0 1993-97 1pc REAR MAIN SEAL 23.4 IN/OZ BAL. REPLACES O.E. FLYW. USE 11" PULL-TYPE CLUTCH

-

-

24

12.835

-

-

24

12.835

24

12.835

PONTIAC - SPECIAL APPLICATIONS 1993-97 FIREBIRD & TA w/6 SPD TRANS 153 NO 700107 29.3 V8 ENG MFG BEFORE 1986 (2pc REAR MAIN SEAL) EXC. 400/454 ENG. USE 11" PULL-TYPE CLUTCH

1993-97 FIREBIRD & TA w/6 SPD TRANS 153 YES 700173 29.0 V8 ENG MFG BEFORE 1986 (2pc REAR MAIN SEAL) 24.4 IN/OZ BAL. w/ 400 CRANK: 400" or 383" STROKER USE 11" PULL-TYPE CLUTCH

NOTE: For clutch pattern dimensions please see listing at the end of the flywheel section ( pg - 160) NOTE: All Centerforce counter balanced flywheels are rough balanced. SOME ALUMINUM FLYWHEELS ARE SPECIAL ORDER ITEMS PLEASE CALL FOR AVAILABILITY.

158

NEW


FLYWHEELS CARS & TRUCKS APPLICATION

RING GEAR COUNTER TEETH BALANCE

STEEL PART#

STEEL WEIGHT

ALUM PART#

ALUM WEIGHT

CLUTCH PATTERN

RING GEAR O.D.

-

19

14.096

FIERO w/ SM BLK CHEVROLET V8 ENG. 1955-85 153 NO 700501 28.4 V-8 ARCHIE KIT w/ GM 2pc. REAR MAIN SEAL V8 ENG. REQUIRES CENTERFORCE CLUTCH ASSEM. SEE FIERO CLUTCH SECTION.

19

12.835

FIERO w/ SM BLK CHEVROLET V8 ENG. 1986-92 153 YES 700502 28.2 V-8 ARCHIE KIT w/ GM 1pc. REAR MAIN V8 ENG. 23.4 IN/OZ - REQUIRES CENTERFORCE CLUTCH ASSEM. SEE FIERO CLUTCH SECTION.

19

12.835

PONTIAC - SPECIAL APPLICATIONS FIERO w/ LS1 CHEVROLET V8 ENG. 168 NO 700503 35.6 V-8 ARCHIE KIT w/ GM LS1 ENG. REQUIRES CENTERFORCE CLUTCH ASSEM. SEE FIERO CLUTCH SECTION.

-

SATURN 2.0L ION REDLINE SUPERCHARGED 135 NO 2004-07 REPLACES OE AND REQUIRES CENTERFORCE CLUTCH ASSEMBLY. SEE CLUTCH SECTION.

900149

8.1

19

NEW

SCION 2.4L VVT ENG. 2005-06 SCION tC - LOW INERTIA STEEL FLYW

120

NO

700838

16.5

-

-

12.000

2.2L 20R, 2.4L 22R & 22RE ENG. 115 1977-96 PASS CAR & TRUCKS w/224mm (8-7/8") CLUTCH

NO

700830

29.3

800830

15.0

25

11.625

2.4L 22RE ENG. 115 1992-96 TRUCKS & 4RUNNER w/236mm (9-1/4") CLUTCH

NO

700834

29.0

-

-

21

11.625

2.7L 3RZFE ENG. 115 1993-02 TRUCKS & 4RUNNER w/250mm (10") CLUTCH

NO

700836

30.9

-

-

20

11.625

3.0L 3VZE V6 ENG. 1987.11-96 TRUCKS w/236mm (9-1/4") CLUTCH

NO

700832

34.6

-

-

12

12.000

TOYOTA

120

NOTE: For clutch pattern dimensions please see listing at the end of the flywheel section ( pg - 160) NOTE: All Centerforce counter balanced flywheels are rough balanced. SOME ALUMINUM FLYWHEELS ARE SPECIAL ORDER ITEMS PLEASE CALL FOR AVAILABILITY.

159


CLUTCH BOLT PATTERN PAGE

#1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15 #16 #17 #18 #19 #20 #21 #22 #23 #24 #25 #26 #27

TYPE 1 3 GROUPS OF 2 BOLT PATTERN MEASURE BETWEEN 1 GROUP FROM BOLT HOLE CENTERS CLUTCH PATTERN

TYPE

8-1/2” FORD 10” - 10.4” GM/CHRYLSER 11” - 12” GM/CHRYLSER 10” - 10-1/2” FORD 11” FORD 11-1/2” FORD 10.4” MUSTANG 1986 - UP 11” FORD DIAPHRAGM 215mm / 8-1/2” MAZDA 225mm / 8-7/8” MAZDA 240mm / 9-7/16” MAZDA 236mm / 9-1/8” TOYOTA 220mm/ 8-5/8” ACURA / HONDA 11”-11-1/2” GM LS1 212mm/ 8-3/8” HONDA 10.4” PANTERA CONVERSION 225mm EAGLE / MITSUBISHI 11” OHC MUSTANG 4.6L 9-1/8” V8 FIERO CONVERSION 220mm/ 8-5/8” HONDA 236mm/ 9-1/4” TOYOTA 12-1/4” DODGE CUMMINS 4 GROUPS OF 2 13” DODGE CUMMINS 4 GROUPS OF 2 11” GM PULL-TYPE 224mm/ 8-7/8” TOYOTA 240mm/ 9-7/16” MITSUBISHI 240mm/ 9-7/16” FORD FOCUS

2 2 2 1 1 1 2 2 2 2 2 2 2 2 2 2 2 2 2 2 1 1 1 2 1 2 2

TYPE 2 EVENLY SPACED BOLT PATTERN MEASURE BOLT HOLES DIRECTLY ACROSS FROM BOLT HOLE CENTERS DIMENSION BOLT DOWEL “A” SIZE PINS 9-11/16” 11-5/8” 12-5/8” 3-1/8” 3-3/8” 3-9/16” 11-3/8” 12-3/8” 9-11/16” 9-59/64” 10-7/8” 10-43/64” 9-47/64” 12-5/8” 9-25/64” 11-3/8” 9-23/32” 12-43/64” 10-9/16” 10” 3-15/16” 3-33/64” 3-21/32” 11-5/8” 4-11/16” 10-49/64” 10-15/64”

5/16” X 18 3/8” X 16 3/8” X 16 5/16” X 18 5/16” X 18 5/16” X 18 8mm X 1.25 3/8” X 16 5/16” X 18 5/16” X 18 5/16” X 18 8mm X 1.25 8mm X 1.25 10mm X 1.50 8mm X 1.25 3/8” X 16 8mm X 1.25 10mm X 1.50 5/16” X 18 8mm X 1.25 8mm X 1.25 5/16” X 18 5/16” X 18 3/8” X 16 8mm X 1.25 8mm X 1.25 8mm X 1.25

YES

YES YES YES YES YES YES YES YES

YES YES YES

NOTE: ALL DIMENSIONS HAVE BEEN ROUNDED TO THE NEAREST FRACTION OF AN INCH AND ARE FOR REFERENCE ONLY. FOR MORE INFORMATION PLEASE CONTACT CENTERFORCE ON OUR TECH LINE AT (928) 771-8422.


RELEASE AND PILOT BEARING MEASUREMENT CHART


PART #

POPULARITY AND INFORMATION LISTING BY ITEM

YEAR APPLICATION

CODE

APPLICATION DIMENSIONS

FW STEP

CENTERFORCE CLUTCH DISCS 280003 280004 280490 280700 281203 281220 281222 281226 281228

91-96 91-96 63-98 63-77 71-86 74-94 66-97 83-88

FORD-MERCURY, ESCORT & ZX 2-TOPAZ FORD-MERCURY, ESCORT & ZX 2-TOPAZ FORD-MERCURY, CARS, SUV, TRUCKS, & VANS FORD-MERCURY, CARS, SUV, TRUCKS, & VANS FORD-MERCURY, CARS FORD-MERCURY, MUSTANG, MUSTANG II, COBRA-CAPRI FORD MUSTANG & MERCURY CAPRI, FORD-MERCURY, CARS, TRUCKS, & VANS FORD-MERCURY, MUSTANG, MUSTANG II,

F F B B E E E C E

8-1/2 in. Dia. Friction Disc 15/16"-22 Spline 7-7/8 in. Dia. Friction Disc 7/8"-20 Spline 10 in. Dia. Friction Disc 1-1/16"-10 Spline 11 in. Dia. Friction Disc 1-1/16"-10 Spline 8-1/2 in. Dia. Friction Disc 1"-23 Spline 8-1/2 in. Dia. Friction Disc 1-1/16"-10 Spline

289040 380115 380800 380920 380944 381009

05-07 91-99 99-04 96-98 79-91 83-94

COBRA-THUNDERBIRD-CAPRI-COUGAR FORD, MUSTANG, MUSTANG II, COBRA SATURN, SATURN FORD, MUSTANG, MUSTANG II, COBRA FORD, MUSTANG, MUSTANG II, COBRA PORSCHE, 924-944 FORD-MAZDA LIGHT TRUCK, SUV & VAN-M, AEROSTAR-BRONCO

E F D E E E

10 in. Dia. Friction Disc 1-1/16"-10 Spline 8-1/2 in. Dia. Friction Disc 15/16"-22 Spline 11 in. Dia. Friction Disc 1-1/16"-10 Spline 10.4 in. Dia. Friction Disc 1-1/16"-10 Spline 8-7/8 in. Dia. Friction Disc 1"-23 Spline 9 in. Dia. Friction Disc 1"-23 Spline

381011 381014 381017 381021 381028

83-87 81-90 97-05 32-01 96-00

II-RANGER-PICK UPS-MERKUR FORD LIGHT TRUCK, SUV & VAN, F-SERIES F-100 - F-550 CHRYSLER-DODGE-PLYMOUTH, CARS & MINI VANS CHEVROLET-PONTIAC, CAMARO, Z-28-CORVETTE-FIREBIRD, TRANS AM-GTO FORD-MERCURY, FLATHEAD-MUSTANG, MUSTANG II, COBRA-CAPRI CHEVROLET & GMC LIGHT TRUCK, SUV &, C, G, K, P, R, V, 10-30 SERIES, FULL

F E D B F

11 in. Dia. Friction Disc 1-1/16"-10 Spline 9 in. Dia. Friction Disc 13/16"-18 Spline 11 in. Dia. Friction Disc 1-1/8"-26 Spline 10.4 in. Dia. Friction Disc 1-1/16"-10 Spline 12 in. Dia. Friction Disc 1-1/8"-10 Spline

F E

12-1/4 in. Dia. Friction Disc 1-1/4"-10 Spline 11 in. Dia. Friction Disc 1-1/8"-26 Spline

F

11 in. Dia. Friction Disc 1-1/4"-10 Spline

381030 381039 NOTE: 381040 381042

SIZE BLAZER, SUBURBAN, 87-92 FORD LIGHT TRUCK, SUV & VAN, F-SERIES F-100 - F-550 93-97 CHEVROLET-PONTIAC, CAMARO, Z-28-FIREBIRD, TRANS AM REVERSED HUB DESIGN TO BE RUN WITH SPRING PACK TOWARDS FLYWHEEL. 87-94 FORD LIGHT TRUCK, SUV & VAN, E-SERIES 100 - 350 & ECONOLINE VAN-F-SERIES F-100 - F-550 95-99 CHEVROLET-OLDSMOBILE-PONTIAC, CAVALIER, Z24, CORSICA,

11 in. Dia. Friction Disc 1-1/16"-10 Spline 9 in. Dia. Friction Disc 1-1/16"-10 Spline

F

9 in. Dia. Friction Disc 1"-14 Spline

381063 381067 381068 381070

94-98 94-98 90-92 96-00

BERETTA-ACHIEVA-GRAND AM (FWD)-SUNFI FORD LIGHT TRUCK, SUV & VAN, F-SERIES F-100 - F-550 FORD LIGHT TRUCK, SUV & VAN, F-SERIES F-100 - F-550 CHEVROLET, CAMARO, Z-28 CHEVROLET & GMC LIGHT TRUCK, SUV &, C, G, K, P, R, V, 10-30 SERIES, FULL

F F F F

12-1/4 in. Dia. Friction Disc 1-1/4"-10 Spline 12-1/4 in. Dia. Friction Disc 1-1/4"-10 Spline 9-1/8 in. Dia. Friction Disc 1"-14 Spline 12 in. Dia. Friction Disc 1-1/8"-10 Spline

381075

SIZE BLAZER, SUBURBAN, 96-02 CHEVROLET & GMC LIGHT TRUCK, SUV &, C, G, K, P, R, V, 10-30 SERIES, FULL

F

12 in. Dia. Friction Disc 1-1/8"-10 Spline

381097

SIZE BLAZER, SUBURBAN, 96-00 CHEVROLET & GMC LIGHT TRUCK, SUV &, C, G, K, P, R, V, 10-30 SERIES, FULL

F

12 in. Dia. Friction Disc 1-1/8"-10 Spline

F F F E F F F F F E F F F F E E A E A

9 in. Dia. Friction Disc 15/16"-17 Spline 8-7/8 in. Dia. Friction Disc 1"-23 Spline 9-11/16 in. Dia. Friction Disc 1-1/8"-26 Spline 10.4 in. Dia. Friction Disc 1-3/8"-10 Spline 12 in. Dia. Friction Disc 1-1/4"-10 Spline 11.5 in. Dia. Friction Disc 1-1/16"-10 Spline 8-7/8 in. Dia. Friction Disc 1"-23 Spline 12-1/4 in. Dia. Friction Disc 1-1/4"-10 Spline 9 in. Dia. Friction Disc 15/16"-17 Spline 11 in. Dia. Friction Disc 1-1/16"-10 Spline 9-1/8 in. Dia. Friction Disc 1"-23 Spline 11-1/2 in. Dia. Friction Disc 1-1/16"-10 Spline 8-7/8 in. Dia. Friction Disc 1"-23 Spline 9-1/8 in. Dia. Friction Disc 1"-23 Spline 10.4 in. Dia. Friction Disc 1"-14 Spline 10.4 in. Dia. Friction Disc 1"-23 Spline 10.4 in. Dia. Friction Disc 1-1/8"-10 Spline

381099 381113 381504 381870 381940 381942 381963 381968 381973 381974 381975 381976 381995 381996 382114 383269 383271 383303 383735

91-94 93-94 93-02 32-48 99-07 99-04 94-97 93-98 94-99 94-04 94-07 95-98 98-09 95-05 32-53 60-87 63-88 63-95

SIZE BLAZER, SUBURBAN, CHRYSLER-DODGE-PLYMOUTH, CARS & MINI VANS FORD-MAZDA LIGHT TRUCK, SUV & VAN-M, RANGER-PICK UPS CHEVROLET-PONTIAC, CAMARO, Z-28-FIREBIRD, TRANS AM FORD, FLATHEAD FORD LIGHT TRUCK, SUV & VAN, F-SERIES F-100 - F-550 FORD LIGHT TRUCK, SUV & VAN, F-SERIES F-100 - F-550 FORD-MAZDA LIGHT TRUCK, SUV & VAN-M, RANGER-PICK UPS FORD LIGHT TRUCK, SUV & VAN, F-SERIES F-100 - F-550 DODGE-PLYMOUTH, NEON FORD, MUSTANG, MUSTANG II, COBRA FORD-MAZDA LIGHT TRUCK, SUV & VAN-M, RANGER-PICK UPS FORD LIGHT TRUCK, SUV & VAN, F-SERIES F-100 - F-550 FORD-MAZDA LIGHT TRUCK, SUV & VAN-M, RANGER-PICK UPS FORD LIGHT TRUCK, SUV & VAN, RANGER FORD, FLATHEAD DODGE-PLYMOUTH, CARS, SUV, & TRUCKS AMC-BUICK-CHEV-GMC-JEEP-OLDS-PONTIA, CARS ADVANCE ADAPTERS DISC (Special), BUICK-CHEVROLET-GMC-JEEP-OLDS-PONTI, CARS

11 in. Dia. Friction Disc 1-1/8"-10 Spline

NOTE: THE APPLICATION INFORMATION LISTED ABOVE IS GENERIC, PLEASE REFFER TO THE APPLICATION SECTION OF THE CATALOG FOR SPECIFIC APPLICATIONS.

POPULARITY RANK EXPLANATION A = FAST MOVER - B = GOOD MOVER - C = FAIR MOVER - D = MODERATE MOVER - E = SLOW ITEM ITEMS LISTED WITH A POPULARITY CODE OF "F" ARE CUSTOM ORDERS THAT CANNOT BE RETURNED THROUGH STOCK ADJUSTMENT

(928) 771-8422 (Voice)

162

(928) 771-8322

(Fax)


PART #

POPULARITY AND INFORMATION LISTING BY ITEM

YEAR APPLICATION

CODE

APPLICATION DIMENSIONS

FW STEP

CENTERFORCE CLUTCH DISCS 383824 383914 383946 384024 384070 384071

79-84 02-08 69-81 62-95 66-87 63-69

AMERICAN MOTORS-CHEVROLET-JEEP, CARS, SUV, & TRUCKS JEEP, SUV, & TRUCKS DODGE LIGHT TRUCK, SUV & VAN, SERIES 100, 200, 300, RAMCHARGER & VAN CHEV-GMC LIGHT TRUCK & SUV & VAN, CRATE ENGINES,SUV,TRUCKS, & VANS DODGE-PLYMOUTH, CARS, SUV, & TRUCKS DODGE, DART, DIPLOMAT, DEMON, GTS, SUPER BEE, ASPEN, CHALLENGER,

384100 384120

CH 89-96 CHEVROLET, CORVETTE 94-03 CHEV-GMC-ISUZU LIGHT TRUCK, SUV & V, S-10/T-10, S-10 BLAZER &

384148 384161 384162 384163 384180 384188 384193 384195

71-83 32-92 49-53 88-91 76-79 96-04 55-06 82-93

PICK-UP-S-15/T-15, JIMMY, SONOMA-HO BUICK-CHEVROLET-GMC-OLDSMOBILE-PONT, CARS BUICK-CHEVROLET-FORD-OLDSMOBILE-PON, CARS & CRATE ENGINES FORD, FLATHEAD DODGE LIGHT TRUCK, SUV & VAN, SERIES 100, 200, 300, RAMCHARGER & VAN JEEP, CJ, DJ, TJ, YJ & JK CHEROKEE, COMANCHE, DISPATCHER, SPT WGN, CHEVROLET & GMC LIGHT TRUCK, SUV &, SUV, TRUCKS, & VANS DODGE LIGHT TRUCK, SUV & VAN-JEEP, SUV, TRUCKS, & VANS CHEVROLET & GMC LIGHT TRUCK, SUV &, C, G, K, P, R, V, 10-30 SERIES, FULL

384200 384201 384204 384208 384212 384611 NOTE: 387132 NOTE: 388144 NOTE: DF281226 DF380800 NOTE: DF381021 DF381039

SIZE BLAZER, SUBURBAN, 67-87 FORD LIGHT TRUCK, SUV & VAN, BRONCO-F-SERIES F-100 - F-550 82-94 AMC-CHEV-GMC-ISUZU-JEEP-PONTIAC, CARS, SUV, TRUCKS, & VANS 83-99 BUICK-CADILLAC-CHEVROLET-OLDS-PONTI, CARS 84-88 CHEVROLET, CORVETTE 86-89 CHEVROLET & GMC LIGHT TRUCK, SUV &, ASTRO VAN-SAFARI VAN 86-01 FORD, MUSTANG, MUSTANG II, COBRA MACHINED FLYWHEEL SIDE OF SPLINE FOR CLEARANCE. PANTERA SERIES 1 DISC (Special), MACHINED FLYWHEEL SIDE OF SPLINE FOR CLEARANCE. 63-04 FORD-MERCURY, CARS, SUV, TRUCKS, & VANS MACHINED FLYWHEEL SIDE OF SPLINE FOR CLEARANCE. 63-97 FORD-MERCURY, CARS, SUV, TRUCKS, & VANS 99-10 FORD, MUSTANG, MUSTANG II, COBRA DF DISC DESIGNED FOR LARGER CRANK DIAMETER. 32-01 FORD-JEEP-MERCURY, CARS, SUV, & TRUCKS 93-97 CHEVROLET-PONTIAC, CAMARO, Z-28-CORVETTE-CRATE ENGINES-FIREBIRD,

NOTE: DF381488 NOTE: DF382559 DF382612 DF383269 DF383271 DF383735 DF384024 DF384070 DF384071

TRANS AM REVERSED HUB DESIGN TO BE RUN WITH SPRING PACK TOWARDS FLYWHEEL. 97-05 CHEVROLET-PONTIAC, CAMARO, Z-28-CORVETTE-FIREBIRD, TRANS AM-GTO MINIMAL MARCEL, MAY CHATTER IN SOME APPLICATIONS. 65-71 FORD, FAIRLANE-GALAXIE-MUSTANG, MUSTANG II, COBRA-TORINO 71-11 BUICK-CADI-CHEV-GMC-OLDS-PONTIAC, CARS 60-87 DODGE-PLYMOUTH, CARS, SUV, & TRUCKS 55-06 AMC-BUICK-CHEV-DODGE-GMC-JEEP-OLDS-, CARS 63-04 BUICK-CHEVROLET-GMC-JEEP-OLDS-PONTI, CARS 62-95 CHEV-GMC LIGHT TRUCK & SUV & VAN, CRATE ENGINES,SUV,TRUCKS, & VANS 66-91 DODGE-PLYMOUTH, CARS, SUV, & TRUCKS 63-69 DODGE, DART, DIPLOMAT, DEMON, GTS, SUPER BEE, ASPEN, CHALLENGER,

DF384148 DF384161 DF384175 DF384200 DF384208 DF384611 NOTE: DF388144 NOTE:

CH 71-83 BUICK-CHEVROLET-GMC-OLDSMOBILE-PONT, CARS 32-92 BUICK-CHEVROLET-FORD-OLDSMOBILE-PON, CARS & CRATE ENGINES 70-72 DODGE-PLYMOUTH, CARS 67-87 FORD LIGHT TRUCK, SUV & VAN, BRONCO-F-SERIES F-100 - F-550 84-88 CHEVROLET, CORVETTE 65-01 FORD, MUSTANG, MUSTANG II, COBRA MACHINED FLYWHEEL SIDE OF SPLINE FOR CLEARANCE. 63-10 FORD-MERCURY, CARS, SUV, TRUCKS, & VANS MACHINED FLYWHEEL SIDE OF SPLINE FOR CLEARANCE.

E E F C D E

9-1/8 in. Dia. Friction Disc 1-1/8"-10 Spline 10.4 in. Dia. Friction Disc 1-1/8"-10 Spline 12 in. Dia. Friction Disc 1"-23 Spline 12 in. Dia. Friction Disc 1-1/8"-10 Spline 11 in. Dia. Friction Disc 1"-23 Spline 11 in. Dia. Friction Disc 1-3/16"-18 Spline

E E

11 in. Dia. Friction Disc 1-1/8"-26 Spline 9-1/4 in. Dia. Friction Disc 1-1/8"-26 Spline

A B F F D E A F

11 in. Dia. Friction Disc 1-1/8"-26 Spline 10.4 in. Dia. Friction Disc 1-1/8"-26 Spline 10 in. Dia. Friction Disc 1"-10 Spline 11 in. Dia. Friction Disc 1"-23 Spline 10.4 in. Dia. Friction Disc 1-1/16"-10 Spline 11 in. Dia. Friction Disc 1-1/8"-10 Spline 10.4 in. Dia. Friction Disc 1-1/8"-10 Spline 12 in. Dia. Friction Disc 1-1/8"-10 Spline

E E F F E D

12 in. Dia. Friction Disc 1-1/16"-10 Spline 9-1/8 in. Dia. Friction Disc 1"-14 Spline 8-1/2 in. Dia. Friction Disc 1"-14 Spline 10-3/4 in. Dia. Friction Disc 1-1/8"-26 Spline 11 in. Dia. Friction Disc 1"-14 Spline 10.4 in. Dia. Friction Disc 1-1/8"-26 Spline

F E

11 in. Dia. Friction Disc 1-1/8"-26 Spline

NEW-C NEW-D

11 in. Dia. Friction Disc 1-1/16"-10 Spline 11 in. Dia. Friction Disc 1-1/16"-10 Spline

NEW-A NEW-E

10.4 in. Dia. Friction Disc 1-1/16"-10 Spline 11 in. Dia. Friction Disc 1-1/8-26 Spline

NEW-E

11 in. Dia. Friction Disc 1-1/8"-26 Spline

NEW-D NEW-C NEW-E NEW-C NEW-A NEW-C NEW-D NEW-F

11 in. Dia. Friction Disc 1-3/8"-10 Spline 12 in. Dia. Friction Disc 1-1/8"- 26 Spline 10.4 in. Dia. Friction Disc 1"-23 Spline 10.4 in. Dia. Friction Disc 1-1/8"-10 Spline 11 in. Dia. Friction Disc 1-1/8"-10 Spline 12 in. Dia. Friction Disc 1-1/8"-10 Spline 11 in. Dia. Friction Disc 1"-23 Spline 11 in. Dia. Friction Disc 1-3/16"-18 Spline

NEW-A NEW-B NEW-F NEW-E NEW-F NEW-D

11 in. Dia. Friction Disc 1-1/8"-26 Spline 10.4 in. Dia. Friction Disc 1-1/8"-26 Spline 10-15/16 in. Dia. Friction Disc 1-3/16-18 Spline 12 in. Dia. Friction Disc 1-1/16"-10 Spline 10-3/4 in. Dia. Friction Disc 1-1/8"-26 Spline 10.4 in. Dia. Friction Disc 1-1/8"-26 Spline

NEW-E

11 in. Dia. Friction Disc 1-1/8"-26 Spline

NOTE: THE APPLICATION INFORMATION LISTED ABOVE IS GENERIC, PLEASE REFFER TO THE APPLICATION SECTION OF THE CATALOG FOR SPECIFIC APPLICATIONS.

POPULARITY RANK EXPLANATION A = FAST MOVER - B = GOOD MOVER - C = FAIR MOVER - D = MODERATE MOVER - E = SLOW ITEM ITEMS LISTED WITH A POPULARITY CODE OF "F" ARE CUSTOM ORDERS THAT CANNOT BE RETURNED THROUGH STOCK ADJUSTMENT

(928) 771-8422 (Voice)

163

(928) 771-8322

(Fax)


PART #

POPULARITY AND INFORMATION LISTING BY ITEM

YEAR APPLICATION

CODE

APPLICATION DIMENSIONS

FW STEP

CENTERFORCE I CLUTCHES CF003503 CF003900 CF004515 CF004613 CF005059 CF005518 CF006507 CF006518 CF007534 CF007535 CF007543 CF007585 CF007901 CF008010 CF008514

92-93 93-02 82-87 94-01 87-02 84-89 88-88 73-02 81-96 87-93 82-92 90-P. 86-99 90-98 00-02

MAZDA, MX-3 FORD-MAZDA, PROBE, GT-626-MX-6 DODGE-MITSUBISHI-PLYMOUTH, CONQUEST-STARION-CONQUEST MAZDA, MX-3-PROTEGE GEO-SUZUKI, METRO-SPRINT-ESTEEM-SWIFT HONDA, ACCORD-PRELUDE HONDA, CIVIC-CRX DODGE-EAGLE-HYUNDAI-MITSU-PLYM, CARS NISSAN-DATSUN, 200SX-280-300 MAZDA LIGHT TRUCK, SUV & VAN, PICK UPS MAZDA, 323, GLC-626 MAZDA LIGHT TRUCK, SUV & VAN, PICK UPS INFINITI-NISSAN-DATSUN, I-30-MAXIMA BMW, 318-Z3 CHEVROLET-OLDSMOBILE-PONTIAC, CAVALIER, Z24, CORSICA,

F F F F E F F F E F F F F F F

8-19/32 in. Dia. Friction Disc 15/16"-22 Spline 8-7/8 in. Dia. Friction Disc 15/16"-22 Spline 8-7/8 in. Dia. Friction Disc 1"-23 Spline 7-7/8 in. Dia. Friction Disc 7/8"-20 Spline 7-1/2 in. Dia. Friction Disc 3/4"-18 Spline 8-3/8 in. Dia. Friction Disc 7/8"-21 Spline 7-7/8 in. Dia. Friction Disc 7/8"-21 Spline 7-7/8 in. Dia. Friction Disc 7/8"-20 Spline 9-7/16 in. Dia. Friction Disc 1"-24 Spline 8-7/8 in. Dia. Friction Disc 15/16"-22 Spline 8-7/8 in. Dia. Friction Disc 15/16"-22 Spline 8-7/8 in. Dia. Friction Disc 15/16"-22 Spline 9-7/16 in. Dia. Friction Disc 1"-24 Spline 8-19/32 in. Dia. Friction Disc 1-1/8"-10 Spline 9-1/8 in. Dia. Friction Disc 1"-14 Spline

CUP -0.787 CUP -0.298

CF008515 CF009501 CF009512 CF009532 CF010517

70-82 80-82 86-95 81-89 71-96

BERETTA-ALERO-GRAND AM (FWD)-SUNFIRE TOYOTA, COROLLA TOYOTA, COROLLA SUZUKI, SAMURAI-SIDEKICK MAZDA, RX-PICK UPS TOYOTA, CELICA-CORONA-SUPRA-PICK UPS & 4RUNNER (ALSO SEE: TACOMA,

F F D F D

7-7/8 in. Dia. Friction Disc 15/16"-21 Spline 8-3/8 in. Dia. Friction Disc 15/16"-21 Spline 7-1/2 in. Dia. Friction Disc 7/8"-20 Spline 8-7/8 in. Dia. Friction Disc 15/16"-22 Spline 8-7/8 in. Dia. Friction Disc 1-1/8"-21 Spline

STEP 0.018 STEP 0.018 CUP -0.090 CUP -0.630 STEP 0.018

CF010536 CF012516 CF018522 CF018538 CF018900 CF018905 CF019505

86-05 88-02 81-04 86-87 87-06 89-07 94-04

TCHRYSLER-DODGE-EAGLE-MITSUBISHI-PLY, CARS DODGE-EAGLE-HYUNDAI-MITSU-PLYM, CARS LEXUS-TOYOTA, CARS, SUV, TRUCKS, & VANS MAZDA LIGHT TRUCK, SUV & VAN, PICK UPS LEXUS-TOYOTA, ES-250-CAMRY-CELICA-SOLARA-RAV4 LEXUS-SCION-TOYOTA, ES-300-tC-CAMRY-CELICA-MR-2-SOLARA-RAV4 TOYOTA LIGHT TRUCKS, SUV & VAN, PICK UPS & 4RUNNER (ALSO SEE:

E F E F E E E

8-7/8 in. Dia. Friction Disc 8-19/32 in. Dia. Friction Disc 7/8"-20 Spline 9-1/4 in. Dia. Friction Disc 1-1/8"-21 Spline 8-7/8 in. Dia. Friction Disc 15/16"-22 Spline 9-1/4 in. Dia. Friction Disc 1-1/8"-21 Spline 9-1/4 in. Dia. Friction Disc 1-1/8"-21 Spline 10 in. Dia. Friction Disc 1-1/8"-21 Spline

CUP -0.608

CF019580 CF020517 CF020544 CF020553 CF021519 CF021550 CF023547

94-05 89-95 86-89 87-99 91-02 86-95 87-03

TACOMA, T-100, TUNDRA)-TACOMA, MAZDA, MIATA, MX-5 GEO-SUZUKI, TRACKER-SIDEKICK MAZDA, RX-PICK UPS TOYOTA, COROLLA-PASEO-TERCEL GEO-SUZUKI, TRACKER-SIDEKICK-VITARA-X-90 ISUZU LIGHT TRUCK, SUV & VAN, AMIGO-PICK UPS HONDA-ISUZU LIGHT TRUCK, SUV & VAN, PASSPORT-AMIGO-PICK

E E F F F F F

8-7/8 in. Dia. Friction Disc 15/16"-22 Spline 8-1/2 in. Dia. Friction Disc 7/8"-20 Spline 9-7/16 in. Dia. Friction Disc 1"-23 Spline 7-7/8 in. Dia. Friction Disc 15/16"-21 Spline 8-1/2 in. Dia. Friction Disc 7/8"-20 Spline 8-19/32 in. Dia. Friction Disc 1"-24 Spline 9-7/16 in. Dia. Friction Disc 1"-24 Spline

CF031517 CF033537 CF034538

UPS-RODEO-TROOPER 89-01 TOYOTA, CAMRY-CELICA-SOLARA 87-90 DODGE-MITSUBISHI-PLYMOUTH, CONQUEST-STARION-CONQUEST 88-01 DODGE-MITSUBISHI-LIGHT TRUCK, SUV &, D-50 & RAM 50

E F F

8-7/8 in. Dia. Friction Disc 1-1/8"-20 Spline 9-7/16 in. Dia. Friction Disc 1"-23 Spline 9-7/16 in. Dia. Friction Disc 1-3/16"-14 Spline

STEP 0.018

CF035542 CF035547 CF035549 CF035916 CF043518 CF053581 CF053912

85-08 89-93 00-09 93-01 74-87 89-93 96-04

PICK-UPS-RAIDER-MONTERO, MONTERO SPORT-PICK UP GEO-TOYOTA, PRIZM-CELICA-COROLLA-MATRIX-MR-2 NISSAN-DATSUN, STANZA-AXXESS PONTIAC-SCION-TOYOTA, VIBE-xA,xB-ECHO-MR-2-YARIS NISSAN-DATSUN, ALTIMA TOYOTA LIGHT TRUCKS, SUV & VAN, LAND CRUISER MAZDA, MIATA, MX-5 NISSAN-DATSUN LIGHT TRUCK, SUV & VA, PATHFINDER-PICK UPS,

E F E F E E E

8-3/8 in. Dia. Friction Disc 15/16"-21 Spline 8-7/8 in. Dia. Friction Disc 1"-24 Spline 8-3/8 in. Dia. Friction Disc 15/16"-21 Spline 8-7/8 in. Dia. Friction Disc 1"-24 Spline 10-13/16 in. Dia. Friction Disc 1-1/8"-10 Spline 7-7/8 in. Dia. Friction Disc 15/16"-22 Spline 9-3/4 in. Dia. Friction Disc 1"-24 Spline

STEP 0.018 STEP 0.004

CF056543 CF058296 CF059591 CF084907 CF100500 CF101641 CF106206 CF110501

88-02 87-93 89-92 90-95 86-92 03-09 96-99 87-96

FRONTIER-XTERRA FORD-MAZDA, PROBE, GT-626-MX-6-PROTEGE BMW, 325-525i MAZDA, RX TOYOTA, MR-2 TOYOTA, SUPRA MAZDA, RX BMW, 328-528-Z3 TOYOTA LIGHT TRUCKS, SUV & VAN, PICK UPS & 4RUNNER (ALSO SEE:

F F F F F E F D

8-7/8 in. Dia. Friction Disc 15/16"-22 Spline 8-63/64 in. Dia. Friction Disc 1-1/8"-10 Spline 8-7/8 in. Dia. Friction Disc 15/16"-22 Spline 8-7/8 in. Dia. Friction Disc 1-1/8"-20 Spline 9-1/4 in. Dia. Friction Disc 1-1/8"-21 Spline 9-1/4 in. Dia. Friction Disc 1"-23 Spline 9-7/16 in. Dia. Friction Disc 1-1/8"-10 Spline 9-1/4 in. Dia. Friction Disc 1-1/8"-21 Spline

CUP -0.787 STEP 0.011 STEP 0.020 STEP 0.018 STEP 0.018

CUP -0.615 CUP -0.024 STEP 0.004 CUP -0.787 CUP -0.787 CUP -0.787 STEP 0.004

STEP STEP STEP STEP STEP

CUP -0.787

STEP 0.018 CUP -0.008 CUP -0.155

STEP 0.018 STEP 0.021

STEP 0.018

TACOMA, T-100, TUNDRA)-TACOMA,

NOTE: THE APPLICATION INFORMATION LISTED ABOVE IS GENERIC, PLEASE REFFER TO THE APPLICATION SECTION OF THE CATALOG FOR SPECIFIC APPLICATIONS.

POPULARITY RANK EXPLANATION A = FAST MOVER - B = GOOD MOVER - C = FAIR MOVER - D = MODERATE MOVER - E = SLOW ITEM ITEMS LISTED WITH A POPULARITY CODE OF "F" ARE CUSTOM ORDERS THAT CANNOT BE RETURNED THROUGH STOCK ADJUSTMENT

(928) 771-8422 (Voice)

164

(928) 771-8322

(Fax)

0.018 0.787 0.018 0.018 0.018


PART #

POPULARITY AND INFORMATION LISTING BY ITEM

YEAR APPLICATION

CODE

APPLICATION DIMENSIONS

FW STEP

CENTERFORCE I CLUTCHES CF120505

92-09 TOYOTA LIGHT TRUCKS, SUV & VAN, PICK UPS & 4RUNNER (ALSO SEE:

E

10 in. Dia. Friction Disc 1-1/8"-21 Spline

STEP 0.018

F F F F F D A D F F F F E F F E F F F F

9-1/4 in. Dia. Friction Disc 15/16"-21 Spline 9-1/8 in. Dia. Friction Disc 1"-24 Spline 8-19/32 in. Dia. Friction Disc 15/16"-22 Spline 11 in. Dia. Friction Disc 11 in. Dia. Friction Disc

CUP -0.315

F E F F E

7-7/8 in. Dia. Friction Disc 7/8"-21 Spline 11 in. Dia. Friction Disc 8-7/8 in. Dia. Friction Disc 8-1/2 in. Dia. Friction Disc 10 in. Dia. Friction Disc

CF121284 CF132560 CF138374 CF165400 CF165473 CF165473S CF165552 CF178066 CF210501 CF210506 CF222507 CF222530 CF260000 CF261015 CF276506 CF279582 CF279910 CF300500 CF330713 CF331156

80-83 88-92 70-85 88-91 55-76 63-95 94-07 73-79 84-87 89-89 96-97 63-77 67-87 67-73 74-99 99-01 87-92 00-02 02-05

TACOMA, T-100, TUNDRA)-TACOMA, DeLOREAN, DeLOREAN ISUZU LIGHT TRUCK, SUV & VAN, TROOPER FORD-MAZDA, COURIER-RX-PICK UPS DODGE LIGHT TRUCK, SUV & VAN, SERIES 100, 200, 300, RAMCHARGER & VAN CHEVROLET-GMC LIGHT TRUCK, SUV & VA, CARS, SUV, TRUCKS, & VANS CHEVY/TOYOTA COVER FOR ADVANCE ADAP, BUICK-CHEV-DODGE-FORD-JEEP-OLDS-PLY, CARS DODGE LIGHT TRUCK, SUV & VAN, DAKOTA-RAM 1500, 2500, 3500 HONDA, CIVIC HONDA, CIVIC-CRX HONDA, CIVIC-CRX HONDA, DEL SOL FORD-MERCURY, CARS, SUV, TRUCKS, & VANS FORD LIGHT TRUCK, SUV & VAN, BRONCO-F-SERIES F-100 - F-550 NISSAN-DATSUN, 510-610-PICK UPS, FRONTIER NISSAN-DATSUN, 280-PATHFINDER-PICK UPS, FRONTIER NISSAN-DATSUN, MAXIMA FORD-MAZDA, PROBE, GT-626-MX-6 CHEVROLET-PONTIAC, CAVALIER, Z24, CORSICA, BERETTA-SUNFIRE CHEVROLET-OLDSMOBILE-PONTIAC, CAVALIER, Z24, CORSICA,

CF340508 CF360010 CF360014 CF360024 CF360025

83-89 97-05 93-94 71-94 79-85

BERETTA-ALERO-GRAND AM (FWD)-SUNFIRE ACURA-HONDA, INTEGRA-ACCORD-PRELUDE CHEVROLET-PONTIAC, CAMARO, Z-28-CORVETTE-FIREBIRD, TRANS AM-GTO FORD-MAZDA LIGHT TRUCK, SUV & VAN-M, RANGER-PICK UPS FORD-MERCURY, CARS FORD-MERCURY, FAIRMONT, MAVERICK-MUSTANG, MUSTANG II,

CF360030 CF360032

COBRA-CAPRI-ZEPHYR 63-98 FORD-MERCURY, CARS, SUV, TRUCKS, & VANS 83-94 FORD-MAZDA LIGHT TRUCK, SUV & VAN-M, AEROSTAR-BRONCO

C E

10 in. Dia. Friction Disc 8-7/8 in. Dia. Friction Disc

CF360033 CF360035

II-RANGER-PICK UPS 66-87 FORD, MUSTANG, MUSTANG II, COBRA-F-SERIES F-100 - F-550 83-89 FORD-MERCURY, MUSTANG, MUSTANG II,

F F

11 in. Dia. Friction Disc 9 in. Dia. Friction Disc

CF360040 CF360048 CF360048S CF360049 CF360055

81-94 81-93 77-97 96-02

F E E E F

9 in. Dia. Friction Disc 10.4 in. Dia. Friction Disc

CF360056

SIZE BLAZER, SUBURBAN, 32-92 AMERICAN MOTORS-CHEVROLET-FORD-PONT, JAVELIN-CAMARO,

B

10.4 in. Dia. Friction Disc

CF360057 CF360058 CF360065

Z-28-FLATHEAD-FIREBIRD, TRANS AM 93-01 FORD-MERCURY, MUSTANG, MUSTANG II, COBRA-CAPRI 87-92 FORD LIGHT TRUCK, SUV & VAN, F-SERIES F-100 - F-550 87-94 FORD LIGHT TRUCK, SUV & VAN, E-SERIES 100 - 350 & ECONOLINE

E F F

10.4 in. Dia. Friction Disc 12-1/4 in. Dia. Friction Disc 11 in. Dia. Friction Disc

CF360072 CF360074

VAN-F-SERIES F-100 - F-550 95-99 CHEVROLET-PONTIAC, CAVALIER, Z24, CORSICA, BERETTA-SUNFIRE 95-99 CHEVROLET-OLDSMOBILE-PONTIAC, CAVALIER, Z24, CORSICA,

F F

8-1/2 in. Dia. Friction Disc 9 in. Dia. Friction Disc

E F F F F F F

11 in. Dia. Friction Disc 9-11/16 in. Dia. Friction Disc 9-1/8 in. Dia. Friction Disc 8-1/2 in. Dia. Friction Disc 8-7/8 in. Dia. Friction Disc 12-1/4 in. Dia. Friction Disc 12 in. Dia. Friction Disc

CF360075 CF360076 CF360102 CF360115 CF360298 CF360303 CF360310

99-04 96-02 90-92 91-99 81-89 94-98 96-00

COBRA-THUNDERBIRD-CAPRI-COUGAR-MERKUR CHRYSLER-DODGE-PLYMOUTH, CARS & MINI VANS FORD-MERCURY, MUSTANG, MUSTANG II, COBRA-CAPRI PANTERA (Special), FORD-MERCURY, CARS, SUV, TRUCKS, & VANS CHEVROLET & GMC LIGHT TRUCK, SUV &, C, G, K, P, R, V, 10-30 SERIES, FULL

BERETTA-ACHIEVA-GRAND AM (FWD)-SUNFI FORD, MUSTANG, MUSTANG II, COBRA CHEVROLET-PONTIAC, CAMARO, Z-28-FIREBIRD, TRANS AM CHEVROLET, CAMARO, Z-28 SATURN, SATURN PORSCHE, 944 FORD LIGHT TRUCK, SUV & VAN, F-SERIES F-100 - F-550 CHEVROLET & GMC LIGHT TRUCK, SUV &, C, G, K, P, R, V, 10-30 SERIES, FULL

11 in. Dia. Friction Disc 12 in. Dia. Friction Disc 1-1/8"-10 Spline 7-1/2 in. Dia. Friction Disc 13/16"-19 Spline 7-1/2 in. Dia. Friction Disc 13/16"-19 Spline 7-7/8 in. Dia. Friction Disc 7/8"-20 Spline 8-1/4 in. Dia. Friction Disc 7/8"-20 Spline 11 in. Dia. Friction Disc 12 in. Dia. Friction Disc 7-7/8 in. Dia. Friction Disc 1"-24 Spline 9-7/16 in. Dia. Friction Disc 1"-24 Spline 9-7/16 in. Dia. Friction Disc 1"-24 Spline 9-7/16 in. Dia. Friction Disc 1"-23 Spline 8-7/16 in. Dia. Friction Disc 1"-14 Spline 9 in. Dia. Friction Disc 1"-14 Spline

CUP -0.900 CUP -0.105 CUP -0.024

STEP STEP STEP STEP

CUP -0.035

11 in. Dia. Friction Disc 12 in. Dia. Friction Disc

CUP -0.787

SIZE BLAZER, SUBURBAN,

NOTE: THE APPLICATION INFORMATION LISTED ABOVE IS GENERIC, PLEASE REFFER TO THE APPLICATION SECTION OF THE CATALOG FOR SPECIFIC APPLICATIONS.

POPULARITY RANK EXPLANATION A = FAST MOVER - B = GOOD MOVER - C = FAIR MOVER - D = MODERATE MOVER - E = SLOW ITEM ITEMS LISTED WITH A POPULARITY CODE OF "F" ARE CUSTOM ORDERS THAT CANNOT BE RETURNED THROUGH STOCK ADJUSTMENT

(928) 771-8422 (Voice)

165

0.004 0.004 0.004 0.020

(928) 771-8322

(Fax)


PART #

POPULARITY AND INFORMATION LISTING BY ITEM

YEAR APPLICATION

CODE

APPLICATION DIMENSIONS

FW STEP

CENTERFORCE I CLUTCHES CF360450 CF360503 CF360504 CF360784 CF360981 CF361000 CF361020 CF361130 NOTE: CF361662 CF361675 CF361739 CF361830 CF361874 CF361877 CF361878 CF361890 CF361897 CF361900 CF361902

96-04 91-96 91-96 89-91 02-08 89-93 93-97 94-96

CHEVROLET & GMC LIGHT TRUCK, SUV &, SUV, TRUCKS, & VANS FORD-MERCURY, ESCORT & ZX 2-TOPAZ FORD-MERCURY, ESCORT & ZX 2-TOPAZ PORSCHE, 944 JEEP, SUV, & TRUCKS CHEVROLET, CORVETTE CHEVROLET-PONTIAC, CAMARO, Z-28-FIREBIRD, TRANS AM CHEVROLET, CORVETTE

E F F F E F F F

11 in. Dia. Friction Disc 8-1/2 in. Dia. Friction Disc 7-7/8 in. Dia. Friction Disc 8-7/8 in. Dia. Friction Disc 10.4 in. Dia. Friction Disc 11 in. Dia. Friction Disc 11 in. Dia. Friction Disc 11 in. Dia. Friction Disc

66-71 55-87 57-77 96-98 58-79 85-95 79-83 81-06 82-85 82-86 82-92

JEEP, CJ, DJ, TJ, YJ & JK CHEROKEE, COMANCHE, DISPATCHER, SPT WGN, BUICK-CHEV-DODGE-GMC-JEEP-OLDS-PLYM, CARS AMERICAN MOTORS-CHEVROLET-PONTIAC, CARS FORD, MUSTANG, MUSTANG II, COBRA BUICK-CHEVROLET-GMC-OLDSMOBILE-PONT, CARS CHEVROLET & GMC LIGHT TRUCK, SUV &, SUV, TRUCKS, & VANS AMERICAN MOTORS-JEEP, JEEP - SUV & TRUCK AMC-DODGE LT-JEEP, CARS, SUV, & TRUCKS JEEP, SUV, & TRUCKS AMC-CHEV-GMC-JEEP-PONTIAC, CARS, SUV, & TRUCKS CHEVROLET-GMC -PONTIAC, CAMARO, Z-28-ASTRO VAN-SAFARI

E B E F E E F B E E F

10.4 in. Dia. Friction Disc 10.4 in. Dia. Friction Disc 10.4 in. Dia. Friction Disc 10.4 in. Dia. Friction Disc 10.4 in. Dia. Friction Disc 11 in. Dia. Friction Disc 9-1/8 in. Dia. Friction Disc 10.4 in. Dia. Friction Disc 10.4 in. Dia. Friction Disc 9-1/8 in. Dia. Friction Disc 9-1/8 in. Dia. Friction Disc

CF361904 CF361909 CF361910 CF361911 CF361940 CF361941 CF361965 CF361968 CF361973 CF361974 CF361975 CF361976 CF361996 CF365221 CF365222 CF402583

83-93 62-95 83-94 84-88 99-07 99-04 93-95 93-98 94-99 94-04 94-07 95-98 98-09 32-53 32-48 69-98

VAN-FIREBIRD, TRANS AM CHEVROLET-GMC -ISUZU-JEEP, SUV & TRUCKS CHEV-DODGE-GMC LIGHT TRUCK, SUV & V, SUV, TRUCKS, & VANS BUICK-CADILLAC-CHEVROLET-OLDS-PONTI, CARS CHEVROLET, CORVETTE FORD LIGHT TRUCK, SUV & VAN, F-SERIES F-100 - F-550 FORD LIGHT TRUCK, SUV & VAN, F-SERIES F-100 - F-550 CHEVROLET-PONTIAC, CAMARO, Z-28-FIREBIRD, TRANS AM FORD LIGHT TRUCK, SUV & VAN, F-SERIES F-100 - F-550 DODGE-PLYMOUTH, NEON FORD, MUSTANG, MUSTANG II, COBRA FORD-MAZDA LIGHT TRUCK, SUV & VAN-M, RANGER-PICK UPS FORD LIGHT TRUCK, SUV & VAN, F-SERIES F-100 - F-550 FORD-MAZDA LIGHT TRUCK, SUV & VAN-M, RANGER-PICK UPS FORD, FLATHEAD FORD, FLATHEAD NISSAN-DATSUN, 200SX-240-260-280-MAXIMA-PICK UPS, FRONTIER-QUEST,

F D F E F F F F F E F F F F E E

9-1/8 in. Dia. Friction Disc 12 in. Dia. Friction Disc 8-1/2 in. Dia. Friction Disc 10-3/4 in. Dia. Friction Disc 12 in. Dia. Friction Disc 11.5 in. Dia. Friction Disc 9-11/16 in. Dia. Friction Disc 12-1/4 in. Dia. Friction Disc 9 in. Dia. Friction Disc 11 in. Dia. Friction Disc 8-7/8 in. Dia. Friction Disc 11-1/2 in. Dia. Friction Disc 8-7/8 in. Dia. Friction Disc 10.4 in. Dia. Friction Disc 10.4 in. Dia. Friction Disc 8-7/8 in. Dia. Friction Disc 1"-24 Spline

CF420507 CF432551 CF459620 CF500500 CF626512 CF645649 CF772777 CF774775 CF780581 CF806908 CF822538 CF983982 MS361914

73-82 86-93 02-06 85-97 80-87 86-95 91-93 87-91 77-99 90-03 02-07 97-05 80-02

VAN NISSAN-DATSUN, 210-B-210 TOYOTA, TERCEL MITSUBISHI, LANCER NISSAN-DATSUN, 300-PATHFINDER-PICK UPS, FRONTIER CHEV-ISUZU LIGHT TRUCK, SUV & VAN, LUV-PICK UPS-TROOPER BMW, 325-524-525i-528 BMW, M5 BMW, M3 DODGE-MITSUBISHI-PLYMOUTH, CARS, SUV, & TRUCKS ACURA-HONDA, CL-ACCORD ACURA-HONDA, RSX-CIVIC FORD LIGHT TRUCK, SUV & VAN, F-SERIES F-100 - F-550 BUICK-CADI-CHEV-JEEP-OLDS-PONTIAC, CARS, SUV, & TRUCKS

F F E F F F F F F E F F D

7-1/16 in. Dia. Friction Disc 13/16"-18 Spline 7-7/8 in. Dia. Friction Disc 15/16"-21 Spline 8-1/2 in. Dia. Friction Disc 7/8"-20 Spline 9-3/4 in. Dia. Friction Disc 1"-24 Spline 8-19/32 in. Dia. Friction Disc 1"-24 Spline 8-63/64 in. Dia. Friction Disc 1-1/8"-10 Spline 9-7/16 in. Dia. Friction Disc 1-1/8"-10 Spline 8-63/64 in. Dia. Friction Disc 1-1/8"-10 Spline 8-7/8 in. Dia. Friction Disc 1"-23 Spline 8-7/8 in. Dia. Friction Disc 1-1/32"-24 Spline 8-7/16 in. Dia. Friction Disc 1"-24 Spline 11-1/2 in. Dia. Friction Disc 1-1/16"-10 Spline 9-1/8 in. Dia. Friction Disc 1"-14 Spline

CFT030101 CFT116116

99-05 MITSUBISHI, ECLIPSE, ECLIPSE SPIDER 90-00 FORD-MAZDA LIGHT TRUCK, SUV & VAN-M, EXPLORER-RANGER-NAVAJO-PICK

E E

9-1/4 in. Dia. Friction Disc 1"-23 Spline 10-5/16 in. Dia. Friction Disc 1"-23 Spline

CFT150651 CFT165473 CFT165552

UPS 05-09 NISSAN-DATSUN LIGHT TRUCK, SUV & VA, PICK UPS, FRONTIER-XTERRA 55-76 CHEVROLET-GMC LIGHT TRUCK, SUV & VA, CARS, SUV, TRUCKS, & VANS 63-95 BUICK-CHEV-DODGE-FORD-JEEP-OLDS-PLY, CARS

E F A

10.4" in. Dia. Friction Disc 1"-24 Spline 11 in. Dia. Friction Disc 11 in. Dia. Friction Disc

CUP -0.787

CUP -0.125

CUP -0.300

STEP 0.004 STEP 0.004 STEP 0.018 STEP 0.004 CUP -0.008 STEP 0.011 STEP 0.011 STEP 0.011 CUP -0.069

CENTERFORCE II CLUTCHES

NOTE: THE APPLICATION INFORMATION LISTED ABOVE IS GENERIC, PLEASE REFFER TO THE APPLICATION SECTION OF THE CATALOG FOR SPECIFIC APPLICATIONS.

POPULARITY RANK EXPLANATION A = FAST MOVER - B = GOOD MOVER - C = FAIR MOVER - D = MODERATE MOVER - E = SLOW ITEM ITEMS LISTED WITH A POPULARITY CODE OF "F" ARE CUSTOM ORDERS THAT CANNOT BE RETURNED THROUGH STOCK ADJUSTMENT

(928) 771-8422 (Voice)

166

(928) 771-8322

(Fax)


PART #

POPULARITY AND INFORMATION LISTING BY ITEM

YEAR APPLICATION

CODE

APPLICATION DIMENSIONS

FW STEP

CENTERFORCE II CLUTCHES CFT178157 CFT240098 CFT260000 CFT261015 CFT360025

96-08 05-09 63-77 67-87 79-85

CFT360030 CFT360032

HYUNDAI, ELANTRA-TIBURON TOYOTA LIGHT TRUCKS, SUV & VAN, FJ CRUISER-TACOMA, T-100, TUNDRA FORD-MERCURY, CARS, SUV, TRUCKS, & VANS FORD LIGHT TRUCK, SUV & VAN, BRONCO-F-SERIES F-100 - F-550 FORD-MERCURY, FAIRMONT, MAVERICK-MUSTANG, MUSTANG II,

E E B E E

8-1/2 in. Dia. Friction Disc 7/8"-20 Spline 10 7/8 in. Dia. Friction Disc 1-1/8"-21 Spline 11 in. Dia. Friction Disc 12 in. Dia. Friction Disc 10 in. Dia. Friction Disc

COBRA-CAPRI-ZEPHYR 63-98 FORD-MERCURY, CARS, SUV, TRUCKS, & VANS 83-94 FORD-MAZDA LIGHT TRUCK, SUV & VAN-M, AEROSTAR-BRONCO

D E

10 in. Dia. Friction Disc 8-7/8 in. Dia. Friction Disc

CFT360033 CFT360035

II-RANGER-PICK UPS 65-87 FORD, FAIRLANE-GALAXIE-MUSTANG, MUSTANG II, COBRA-TORINO-F-SERIES 83-89 FORD-MERCURY, MUSTANG, MUSTANG II,

E F

11 in. Dia. Friction Disc 9 in. Dia. Friction Disc

CFT360040 CFT360048 CFT360049 CFT360055

81-94 81-93 77-97 96-02

COBRA-THUNDERBIRD-CAPRI-COUGAR-MERKUR CHRYSLER-DODGE-PLYMOUTH, CARS & MINI VANS FORD-MERCURY, MUSTANG, MUSTANG II, COBRA-CAPRI FORD-MERCURY, CARS, SUV, TRUCKS, & VANS CHEVROLET & GMC LIGHT TRUCK, SUV &, C, G, K, P, R, V, 10-30 SERIES, FULL

F D E F

9 in. Dia. Friction Disc 10.4 in. Dia. Friction Disc 11 in. Dia. Friction Disc 12 in. Dia. Friction Disc

CFT360056

SIZE BLAZER, SUBURBAN, 32-92 AMERICAN MOTORS-CHEVROLET-FORD-PONT, JAVELIN-CAMARO, Z-28-CRATE

E

10.4 in. Dia. Friction Disc

CFT360057 CFT360066

ENGINES-FLATHEAD-FIREBIRD, TRANS 86-01 FORD-MERCURY, MUSTANG, MUSTANG II, COBRA-CAPRI 91-93 CHRYSLER-DODGE-PLYMOUTH, LEBARON-DAYTONA, IROC, SHADOW, SPIRIT,

D F

10.4 in. Dia. Friction Disc 9 in. Dia. Friction Disc

CFT360075 CFT360200 CFT360310

400, 600, ARIES, LANC 99-04 FORD, MUSTANG, MUSTANG II, COBRA 79-85 PORSCHE, 924 96-00 CHEVROLET & GMC LIGHT TRUCK, SUV &, C, G, K, P, R, V, 10-30 SERIES, FULL

E F F

11 in. Dia. Friction Disc 8-7/8 in. Dia. Friction Disc 12 in. Dia. Friction Disc

CFT360450 CFT360981 CFT361170

SIZE BLAZER, SUBURBAN, 96-04 CHEVROLET & GMC LIGHT TRUCK, SUV &, SUV, TRUCKS, & VANS 02-08 JEEP, SUV, & TRUCKS 94-03 CHEV-GMC-ISUZU LIGHT TRUCK, SUV & V, S-10/T-10, S-10 BLAZER &

E E E

11 in. Dia. Friction Disc 10.4 in. Dia. Friction Disc 9-1/4 in. Dia. Friction Disc

CFT361675 CFT361739 CFT361800 CFT361830 CFT361874 CFT361877 CFT361890 CFT361897 CFT361902

55-87 63-77 63-74 96-98 58-79 85-95 81-06 82-85 82-89

PICK-UP-S-15/T-15, JIMMY, SONOMA-HO BUICK-CHEV-DODGE-GMC-JEEP-OLDS-PLYM, CARS AMC-CHEV-DODGE-PLYM-PONT, CARS DODGE-PLYMOUTH, CARS FORD, MUSTANG, MUSTANG II, COBRA BUICK-CHEVROLET-GMC-OLDSMOBILE-PONT, CARS CHEVROLET & GMC LIGHT TRUCK, SUV &, SUV, TRUCKS, & VANS AMC-DODGE LT-JEEP, CARS, SUV, & TRUCKS JEEP, SUV, & TRUCKS CHEVROLET-GMC LIGHT TRUCK, SUV & VA, CAMARO, Z-28-ASTRO VAN-SAFARI

A D E F F E A D F

10.4 in. Dia. Friction Disc 10.4 in. Dia. Friction Disc 11 in. Dia. Friction Disc 10.4 in. Dia. Friction Disc 10.4 in. Dia. Friction Disc 11 in. Dia. Friction Disc 10.4 in. Dia. Friction Disc 10.4 in. Dia. Friction Disc 9-1/8 in. Dia. Friction Disc

CFT361904 CFT361909 CFT361911 CFT363309 CFT374138 CFT500300 CFT500500 CFT505156 CFT510001

83-93 62-95 84-88 05-07 70-85 87-92 85-97 02-05 81-90

VAN CHEVROLET-GMC -ISUZU-JEEP, SUV & TRUCKS CHEV-DODGE-GMC, CARS, SUV, TRUCKS, & VANS CHEVROLET, CORVETTE FORD, MUSTANG, MUSTANG II, COBRA FORD-MAZDA, COURIER-RX-PICK UPS FORD-MAZDA, PROBE, GT-626-MX-6 NISSAN-DATSUN, 300-PATHFINDER-PICK UPS, FRONTIER LEXUS, IS-300 DODGE-MITSUBISHI-PLYMOUTH, D-50 & RAM 50 PICK-UPS-RAIDER-PICK

F D F E F F F E F

9-1/8 in. Dia. Friction Disc 12 in. Dia. Friction Disc 10-3/4 in. Dia. Friction Disc 10 in. Dia. Friction Disc 8-19/32 in. Dia. Friction Disc 15/16"-22 Spline 9-7/16 in. Dia. Friction Disc 1"-23 Spline 9-3/4 in. Dia. Friction Disc 1"-24 Spline 9-1/4 in. Dia. Friction Disc 1-1/8"-21 Spline 8-19/32 in. Dia. Friction Disc 1"-23 Spline

CFT512626 CFT515004 CFT515008 CFT517010

80-87 82-87 70-82 71-96

UPS-ARROW CHEV-ISUZU LIGHT TRUCK, SUV & VAN, LUV-PICK UPS-TROOPER DODGE-MITSUBISHI-PLYMOUTH, CONQUEST-STARION-CONQUEST TOYOTA, COROLLA TOYOTA, CELICA-CORONA-SUPRA-PICK UPS & 4RUNNER (ALSO SEE: TACOMA,

F F E B

8-19/32 in. Dia. Friction Disc 1"-24 Spline 8-7/8 in. Dia. Friction Disc 1"-23 Spline 7-7/8 in. Dia. Friction Disc 15/16"-21 Spline 8-7/8 in. Dia. Friction Disc 1-1/8"-21 Spline

STEP 0.018 STEP 0.018

CFT518006 CFT522018

T73-02 DODGE-EAGLE-HYUNDAI-MITSU-PLYM, CARS 81-04 LEXUS-TOYOTA, CARS, SUV, TRUCKS, & VANS

F D

7-7/8 in. Dia. Friction Disc 7/8"-20 Spline 9-1/4 in. Dia. Friction Disc 1-1/8"-21 Spline

STEP 0.018

CUP -0.315 STEP 0.020 STEP 0.004 STEP 0.018

CUP -0.008

NOTE: THE APPLICATION INFORMATION LISTED ABOVE IS GENERIC, PLEASE REFFER TO THE APPLICATION SECTION OF THE CATALOG FOR SPECIFIC APPLICATIONS.

POPULARITY RANK EXPLANATION A = FAST MOVER - B = GOOD MOVER - C = FAIR MOVER - D = MODERATE MOVER - E = SLOW ITEM ITEMS LISTED WITH A POPULARITY CODE OF "F" ARE CUSTOM ORDERS THAT CANNOT BE RETURNED THROUGH STOCK ADJUSTMENT

(928) 771-8422 (Voice)

167

(928) 771-8322

(Fax)


PART #

POPULARITY AND INFORMATION LISTING BY ITEM

YEAR APPLICATION

CODE

APPLICATION DIMENSIONS

FW STEP

CENTERFORCE II CLUTCHES CFT527007

89-04 NISSAN-DATSUN LIGHT TRUCK, SUV & VA, AXXESS-PICK UPS,

F

9-7/16 in. Dia. Friction Disc 1"-24 Spline

STEP 0.004

E F E F F E F F F E E

8-7/8 in. Dia. Friction Disc 15/16"-22 Spline 8-7/8 in. Dia. Friction Disc 1"-24 Spline 9-7/16 in. Dia. Friction Disc 1"-24 Spline 9-7/16 in. Dia. Friction Disc 1"-23 Spline 8-7/8 in. Dia. Friction Disc 15/16"-22 Spline 8-7/8 in. Dia. Friction Disc 15/16"-22 Spline 9-7/16 in. Dia. Friction Disc 1"-23 Spline 8-7/8 in. Dia. Friction Disc 1"-24 Spline 8-7/8 in. Dia. Friction Disc 1"-23 Spline 9-7/16 in. Dia. Friction Disc 1"-24 Spline 8-7/8 in. Dia. Friction Disc 1"-24 Spline

CUP 0.630 STEP 0.004 STEP 0.004

E F E D F E

9-3/4" in. Dia. Friction Disc 1"-24 Spline 9-1/4 in. Dia. Friction Disc 1"-23 Spline 8-5/8 in. Dia. Friction Disc 1-1/32"-24 Spline 8-3/8 in. Dia. Friction Disc 7/8"-20 Spline 8-5/8 in. Dia. Friction Disc 1"-24 Spline 9-3/4 in. Dia. Friction Disc 1"-24 Spline

E F NEW-E D E

8-5/8 in. Dia. Friction Disc 1-1/32"-24 Spline 8-3/8 in. Dia. Friction Disc 7/8"-20 Spline 11 in. Dia. Friction Disc 1-3/8"-10 Spline 11 in. Dia. Friction Disc 1-3/8"-10 Spline 11 in. Dia. Friction Disc 1-1/8"-10 Spline

CFT532009 CFT533277 CFT534007 CFT537033 CFT543007 CFT543056 CFT544020 CFT547035 CFT581780 CFT582279 CFT583402

81-89 84-86 81-96 87-90 82-92 88-02 86-89 89-93 77-99 74-99 69-98

FRONTIER-XTERRA MAZDA, RX-PICK UPS NISSAN-DATSUN, 200SX NISSAN-DATSUN, 200SX-280-300 DODGE-MITSUBISHI-PLYMOUTH, CONQUEST-STARION-CONQUEST MAZDA, 323, GLC-626 FORD-MAZDA, PROBE, GT-626-MX-6-PROTEGE MAZDA, RX-PICK UPS NISSAN-DATSUN, STANZA-AXXESS DODGE-MITSUBISHI-PLYMOUTH, CARS, SUV, & TRUCKS NISSAN-DATSUN, 280-PATHFINDER-PICK UPS, FRONTIER NISSAN-DATSUN, 200SX-240-260-280-MAXIMA-PICK UPS, FRONTIER-QUEST,

CFT633500 CFT641101 CFT900800 CFT902802 CFT909807 CFT912053

00-04 03-09 92-01 90-00 90-91 96-04

VAN NISSAN-DATSUN LIGHT TRUCK, SUV & VA, PICK UPS, FRONTIER-XTERRA MAZDA, RX ACURA-HONDA, INTEGRA-CIVIC-CR-V-DEL SOL HONDA, CIVIC-CRX-DEL SOL ACURA, INTEGRA NISSAN-DATSUN LIGHT TRUCK, SUV & VA, PATHFINDER-PICK UPS,

CFT915015 CFT918802 MST559000 MST559033 MST735000

92-02 01-05 65-71 65-71 67-94

FRONTIER-XTERRA HONDA, PRELUDE HONDA, CIVIC FORD, FAIRLANE-GALAXIE-MUSTANG, MUSTANG II, COBRA-TORINO FORD, FAIRLANE-GALAXIE-MUSTANG, MUSTANG II, COBRA-TORINO FORD LIGHT TRUCK, SUV & VAN, BRONCO

DF000100 DF003503 DF004504 DF007006 DF007507 DF009032

89-93 89-96 91-96 92-03 97-04 83-94

CHEVROLET, CORVETTE FORD-MAZDA-MERCURY, ESCORT & ZX 2-PROTEGE-TOPAZ FORD-MERCURY, ESCORT & ZX 2-TOPAZ AUDI, 100, 100LS, 100 QUATTRO, WAGON-80, 80 QUATTRO, 90, 90 QUATTR FORD-MAZDA-MERCURY, ESCORT & ZX 2-ESCAPE-TRIBUTE-TOPAZ FORD-MAZDA LIGHT TRUCK, SUV & VAN-M, AEROSTAR-BRONCO

DF009035 DF010008 DF010249 DF011033 DF011401 DF012124 DF012628 DF014040 DF017010 DF021015 DF021048 DF021057 DF021057S DF021221 DF021739 DF023052 DF023500 DF024015 DF024909 DF028310

85-89 90-98 04-07 83-87 02-04 91-05 03-09 81-90 97-05 87-89 81-93 93-01 72-P. 32-53 65-73 92-04 11-11 62-95 96-00

II-RANGER-PICK UPS MERCURY, MERKUR F BMW, 318-Z3 F CHEVROLET-SATURN, COBALT-ION D FORD LIGHT TRUCK, SUV & VAN, F-SERIES F-100 - F-550 F FORD, FOCUS ZTS & ZX3 C SUBARU, IMPREZA-LEGACY E SUBARU, IMPREZA F CHRYSLER-DODGE-PLYMOUTH, CARS & MINI VANS F CHEVROLET-PONTIAC, CAMARO, Z-28-CORVETTE-FIREBIRD, TRANS AM-GTO A PORSCHE, 911 E FORD-MERCURY, MUSTANG, MUSTANG II, COBRA-CAPRI A FORD-MERCURY, MUSTANG, MUSTANG II, COBRA-CAPRI A FORD, PANTERA E FORD, FLATHEAD F FORD, MUSTANG, MUSTANG II, COBRA E VOLKSWAGEN, CORRADO-GOLF-JETTA-PASSAT E FORD, MUSTANG, MUSTANG II, COBRA NEW-B GM/FORD (Special), F CHEV-GMC LIGHT TRUCK & SUV & VAN, CRATE ENGINES,SUV,TRUCKS, & VANS A CHEVROLET & GMC LIGHT TRUCK, SUV &, C, G, K, P, R, V, 10-30 SERIES, FULL E

DF030058 DF030101 DF030543

SIZE BLAZER, SUBURBAN, 87-92 FORD LIGHT TRUCK, SUV & VAN, F-SERIES F-100 - F-550 99-05 MITSUBISHI, ECLIPSE, ECLIPSE SPIDER 91-94 MERCURY, CAPRI

CUP -0.787 CUP -0.787 STEP 0.004 STEP 0.004 STEP 0.004

STEP 0.110

CUP -0.069

DUAL FRICTION CLUTCHES F F F F E E

E E F

11 in. Dia. Friction Disc 1-1/8"-26 Spline 8-1/2 in. Dia. Friction Disc 15/16"-22 Spline 7-7/8 in. Dia. Friction Disc 7/8"-20 Spline 9-7/16 in. Dia. Friction Disc 15/16"-23 Spline 8-7/8 in. Dia. Friction Disc 15/16"-22 Spline 8-7/8 in. Dia. Friction Disc 1"-23 Spline 9 in. Dia. Friction Disc 1"-23 Spline 8-19/32 in. Dia. Friction Disc 1-1/8"-10 Spline 9-1/8" in. Dia. Friction Disc 1"-14 Spline 11 in. Dia. Friction Disc 1-1/16"-10 Spline 9-1/8 in. Dia. Friction Disc 1"-14 Spline 9 in. Dia. Friction Disc 1"-24 Spline 9-7/16 in. Dia. Friction Disc 1"-24 Spline 9 in. Dia. Friction Disc 13/16"-18 Spline 11 in. Dia. Friction Disc 1-1/8"-26 Spline 9-7/16 in. Dia. Friction Disc 1"-23 Spline 10.4 in. Dia. Friction Disc 1-1/16"-10 Spline 10.4 in. Dia. Friction Disc 1-1/16"-10 Spline 10.4 in. Dia. Friction Disc 1-1/16"-10 Spline 10.4 in. Dia. Friction Disc 1-1/16"-10 Spline 10.4 in. Dia. Friction Disc 1-1/16"-10 Spline 9 in. Dia. Friction Disc 7/8"-28 Spline 11 in. Dia. Friction Disc 1"-23 Spline

CUP -0.787

CUP -0.295

CUP -.488

12 in. Dia. Friction Disc 1-1/8"-10 Spline 12 in. Dia. Friction Disc 1-1/8"-10 Spline 12-1/4 in. Dia. Friction Disc 1-1/4"-10 Spline 9-1/4 in. Dia. Friction Disc 1"-23 Spline 8-7/8 in. Dia. Friction Disc 15/16"-22 Spline

CUP -0.787

NOTE: THE APPLICATION INFORMATION LISTED ABOVE IS GENERIC, PLEASE REFFER TO THE APPLICATION SECTION OF THE CATALOG FOR SPECIFIC APPLICATIONS.

POPULARITY RANK EXPLANATION A = FAST MOVER - B = GOOD MOVER - C = FAIR MOVER - D = MODERATE MOVER - E = SLOW ITEM ITEMS LISTED WITH A POPULARITY CODE OF "F" ARE CUSTOM ORDERS THAT CANNOT BE RETURNED THROUGH STOCK ADJUSTMENT

(928) 771-8422 (Voice)

168

(928) 771-8322

(Fax)


PART #

POPULARITY AND INFORMATION LISTING BY ITEM

YEAR APPLICATION

CODE

APPLICATION DIMENSIONS

FW STEP

DUAL FRICTION CLUTCHES DF037672 DF038047 DF039000 DF039020 DF039084 DF039130 DF040065

03-05 99-06 89-93 93-97 94-96 94-96 87-94

DODGE, NEON AUDI-VOLKSWAGEN, TT-BEETLE-GOLF-JETTA CHEVROLET, CORVETTE--CRATE ENGINES CHEVROLET-PONTIAC, CAMARO, Z-28-CRATE ENGINES-FIREBIRD, TRANS AM CHEVROLET, CORVETTE CHEVROLET, CORVETTE--CRATE ENGINES FORD LIGHT TRUCK, SUV & VAN, E-SERIES 100 - 350 & ECONOLINE

E E D A F E F

9-7/16 in. Dia. Friction Disc 15/16"-17 Spline 9 in. Dia. Friction Disc 7/8"-28 Spline 11 in. Dia. Friction Disc 1-1/8-26 Spline 11 in. Dia. Friction Disc 1-1/8-26 Spline 11 in. Dia. Friction Disc 1-1/8"-26 Spline 11 in. Dia. Friction Disc 1-1/8-26 Spline 11 in. Dia. Friction Disc 1-1/4"-10 Spline

DF045040 DF049066

VAN-F-SERIES F-100 - F-550 91-94 CHRYSLER-DODGE-PLYMOUTH, CARS 91-93 CHRYSLER-DODGE-PLYMOUTH, LEBARON-DAYTONA, IROC, SHADOW, SPIRIT,

F F

9 in. Dia. Friction Disc 15/16"-17 Spline 9 in. Dia. Friction Disc 15/16"-17 Spline

DF059005 DF063303 DF066178 DF067303 DF068049 DF070310

87-02 94-98 94-07 94-98 90-92 96-00

400, 600, ARIES, LANC GEO-SUZUKI, METRO-SPRINT-ESTEEM-SWIFT FORD LIGHT TRUCK, SUV & VAN, F-SERIES F-100 - F-550 DODGE LIGHT TRUCK, SUV & VAN, DAKOTA-RAM 1500, 2500, 3500 FORD LIGHT TRUCK, SUV & VAN, F-SERIES F-100 - F-550 PORSCHE, 911 CHEVROLET & GMC LIGHT TRUCK, SUV &, C, G, K, P, R, V, 10-30 SERIES, FULL

E F D F F F

7-1/2 in. Dia. Friction Disc 3/4"-18 Spline 12-1/4 in. Dia. Friction Disc 1-1/4"-10 Spline 12 in. Dia. Friction Disc 1-1/8"-10 Spline 12-1/4 in. Dia. Friction Disc 1-1/4"-10 Spline 9-7/16 in. Dia. Friction Disc 1"-23 Spline 12 in. Dia. Friction Disc 1-1/8"-10 Spline

DF070552

SIZE BLAZER, SUBURBAN, 66-87 DODGE-PLYMOUTH LIGHT TRUCK & VAN, SERIES 100, 200, 300, RAMCHARGER

E

11 in. Dia. Friction Disc 1"-23 Spline

DF070800 DF071800

& VAN-TRAILDUSTER 68-74 DODGE-PLYMOUTH, CARS 63-69 DODGE, DART, DIPLOMAT, DEMON, GTS, SUPER BEE, ASPEN, CHALLENGER,

C D

11 in. Dia. Friction Disc 1"-23 Spline 11 in. Dia. Friction Disc 1-3/16"-18 Spline

DF074006 DF075055

CH 92-97 AUDI, S 4-S 6, S 6 QUATTRO 96-02 CHEVROLET & GMC LIGHT TRUCK, SUV &, C, G, K, P, R, V, 10-30 SERIES, FULL

F E

9-7/16 in. Dia. Friction Disc 15/16"-23 Spline 12 in. Dia. Friction Disc 1-1/8"-10 Spline

DF084025

SIZE BLAZER, SUBURBAN, 99-06 CHEVROLET & GMC LIGHT TRUCK, SUV &, C, G, K, P, R, V, 10-30 SERIES, FULL

E

11-7/8 in. Dia. Friction Disc 1-1/8"-10 Spline

DF087110 DF097310

SIZE BLAZER, SUBURBAN, 94-02 VOLKSWAGEN, CABRIO-GOLF-JETTA 96-00 CHEVROLET & GMC LIGHT TRUCK, SUV &, C, G, K, P, R, V, 10-30 SERIES, FULL

E E

- in. Dia. Friction Disc 7/8"-28 Spline 12 in. Dia. Friction Disc 1-1/8"-10 Spline

SIZE BLAZER, SUBURBAN, 02-08 JEEP, SUV, & TRUCKS 91-94 CHRYSLER-DODGE-PLYMOUTH, CARS & MINI VANS 94-96 CHEVROLET, CORVETTE

B F E

10.4 in. Dia. Friction Disc 1-1/8"-10 Spline 9 in. Dia. Friction Disc 15/16"-17 Spline 11 in. Dia. Friction Disc 1-1/8"-26 Spline

F F F NEW-E F E

11 in. Dia. Friction Disc 1-1/8"-26 Spline 8-7/8 in. Dia. Friction Disc 15/16"-22 Spline 8-7/8 in. Dia. Friction Disc 1"-23 Spline 10.4 in. Dia. Friction Disc 1"-14 Spline 8-1/2 in. Dia. Friction Disc 15/16"-22 Spline 10 in. Dia. Friction Disc 1"-23 Spline

DF098391 DF099040 DF100130 NOTE: DF100140 DF111812 DF113014 DF114056 DF115115 DF116116

94-95 88-92 93-94 32-53 91-99 90-98

DF120170

UPS 94-03 CHEV-GMC-ISUZU LIGHT TRUCK, SUV & V, S-10/T-10, S-10 BLAZER &

CHEVROLET, CORVETTE FORD, PROBE, GT FORD-MAZDA LIGHT TRUCK, SUV & VAN-M, RANGER-PICK UPS FORD, FLATHEAD SATURN, SATURN FORD-MAZDA LIGHT TRUCK, SUV & VAN-M, EXPLORER-RANGER-NAVAJO-PICK

DF130733 DF132057S DF138138 DF140833

00-02 69-71 98-06 00-02

PICK-UP-S-15/T-15, JIMMY, SONOMA-HO CHEVROLET-PONTIAC, CAVALIER, Z24, CORSICA, BERETTA-SUNFIRE FORD, PANTERA VOLKSWAGEN, BEETLE-GOLF-JETTA CHEVROLET-OLDSMOBILE-PONTIAC, CAVALIER, Z24, CORSICA,

DF144144 DF145117 DF148000 DF148033 DF148075 DF148552 DF148679 DF150651 DF161056

96-03 01-09 63-77 65-87 99-04 71-83 05-10 05-09 32-92

BERETTA-ALERO-GRAND AM (FWD)-SUNFIRE BMW, 540 FORD-MAZDA LIGHT TRUCK, SUV & VAN-M, EXPLORER-RANGER-PICK UPS FORD-MERCURY, CARS, SUV, TRUCKS, & VANS FORD, FAIRLANE-GALAXIE-MUSTANG, MUSTANG II, COBRA-TORINO-F-SERIES FORD, MUSTANG, MUSTANG II, COBRA BUICK-CHEVROLET-GMC-OLDSMOBILE-PONT, CARS FORD, MUSTANG, MUSTANG II, COBRA NISSAN-DATSUN LIGHT TRUCK, SUV & VA, PICK UPS, FRONTIER-XTERRA CHEVROLET-FORD-PONTIAC, CAMARO, Z-28-CRATE

E

9-1/4 in. Dia. Friction Disc 1-1/8"-26 Spline

F E F F

8-7/16 in. Dia. Friction Disc 1"-14 Spline 10.4 in. Dia. Friction Disc 1-1/8"-10 Spline 8-7/16 in. Dia. Friction Disc 7/8"-28 Spline 9-1/8 in. Dia. Friction Disc 1"-14 Spline

F E D D C A E E C

9-7/16 in. Dia. Friction Disc 1-3/8"-10 Spline 10-1/8" in. Dia. Friction Disc 1"-23 Spline 11 in. Dia. Friction Disc 1-1/8"-26 Spline 11 in. Dia. Friction Disc 1-1/8"-26 Spline 11 in. Dia. Friction Disc 1-1/8"-26 Spline 11 in. Dia. Friction Disc 1-1/8"-26 Spline 11 in. Dia. Friction Disc 1-1/8"-26 Spline 10.4" in. Dia. Friction Disc 1"-24 Spline 10.4 in. Dia. Friction Disc 1-1/8"-26 Spline

STEP 0.130

CUP -0.920

CUP -0.787

NOTE: THE APPLICATION INFORMATION LISTED ABOVE IS GENERIC, PLEASE REFFER TO THE APPLICATION SECTION OF THE CATALOG FOR SPECIFIC APPLICATIONS.

POPULARITY RANK EXPLANATION A = FAST MOVER - B = GOOD MOVER - C = FAIR MOVER - D = MODERATE MOVER - E = SLOW ITEM ITEMS LISTED WITH A POPULARITY CODE OF "F" ARE CUSTOM ORDERS THAT CANNOT BE RETURNED THROUGH STOCK ADJUSTMENT

(928) 771-8422 (Voice)

169

(928) 771-8322

(Fax)

N/A


PART #

POPULARITY AND INFORMATION LISTING BY ITEM

YEAR APPLICATION

CODE

APPLICATION DIMENSIONS

FW STEP

DUAL FRICTION CLUTCHES DF161057 DF161675 DF161739 DF161830 DF161911 DF163473 DF175810 DF178157 DF180675 DF184030

86-01 71-83 71-77 96-98 84-88 88-91 70-72 96-08 76-79 65-98

ENGINES-FLATHEAD-FIREBIRD, TRANS AM FORD, MUSTANG, MUSTANG II, COBRA BUICK-CHEVROLET-OLDSMOBILE-PONTIAC, CARS CHEVROLET - CRATE ENGINES-PONTIAC, CARS, CRATE ENGINES, MINIVANS FORD, MUSTANG, MUSTANG II, COBRA CHEVROLET, CORVETTE DODGE LIGHT TRUCK, SUV & VAN, SERIES 100, 200, 300, RAMCHARGER & VAN DODGE-PLYMOUTH, CARS HYUNDAI, ELANTRA-TIBURON JEEP, CJ, DJ, TJ, YJ & JK CHEROKEE, COMANCHE, DISPATCHER, SPT WGN, FORD LIGHT TRUCK, SUV & VAN, BRONCO-E-SERIES 100 - 350 & ECONOLINE

B A E E E E E E D E

10.4 in. Dia. Friction Disc 1-1/8"-26 Spline 10.4 in. Dia. Friction Disc 1-1/8"-26 Spline 10.4 in. Dia. Friction Disc 1-1/8"-26 Spline 10.4 in. Dia. Friction Disc 1-1/8"-26 Spline 10-3/4 in. Dia. Friction Disc 1-1/8"-26 Spline 11 in. Dia. Friction Disc 1"-23 Spline 10-15/16 in. Dia. Friction Disc 1-3/16-18 Spline 8-1/2 in. Dia. Friction Disc 7/8"-20 Spline 10.4 in. Dia. Friction Disc 1-1/16"-10 Spline 10 in. Dia. Friction Disc 1-1/16"-10 Spline

DF188450 DF188801 DF191198 DF193675 DF193890 DF193897 DF195909

96-04 03-06 65-76 55-85 81-06 82-85 82-93

VAN-F-SERIES F-100 - F CHEVROLET & GMC LIGHT TRUCK, SUV &, SUV, TRUCKS, & VANS MITSUBISHI, LANCER PORSCHE, 911-912-914 JEEP, SUV, & TRUCKS AMC-DODGE LT-JEEP, CARS, SUV, & TRUCKS JEEP, SUV, & TRUCKS CHEVROLET & GMC LIGHT TRUCK, SUV &, C, G, K, P, R, V, 10-30 SERIES, FULL

D F E C A D E

11 in. Dia. Friction Disc 1-1/8"-10 Spline 9-7/16 in. Dia. Friction Disc 1"-23 Spline 8-1/2 in. Dia. Friction Disc 1"-24 Spline 10.4 in. Dia. Friction Disc 1-1/8"-10 Spline 10.4 in. Dia. Friction Disc 1-1/8"-10 Spline 10.4 in. Dia. Friction Disc 1-1/8"-10 Spline 12 in. Dia. Friction Disc 1-1/8"-10 Spline

DF198893 DF198902 DF200015 DF200192 DF200199 DF200944 DF201074

82-83 82-84 67-87 70-71 72-86 79-85 95-99

SIZE BLAZER, SUBURBAN, CHEVROLET, CAMARO, Z-28 CHEVROLET, CAMARO, Z-28 FORD LIGHT TRUCK, SUV & VAN, BRONCO-F-SERIES F-100 - F-550 PORSCHE, 911 PORSCHE, 911 PORSCHE, 924 CHEVROLET-OLDSMOBILE-PONTIAC, CAVALIER, Z24, CORSICA,

F F D F E F E

9-1/8 in. Dia. Friction Disc 1-1/8"-10 Spline 9-1/8 in. Dia. Friction Disc 1-1/8"-10 Spline 12 in. Dia. Friction Disc 1-1/16"-10 Spline 8-7/8 in. Dia. Friction Disc 1"-24 Spline 8-7/8 in. Dia. Friction Disc 3/4"-20 Spline 8-7/8 in. Dia. Friction Disc 1"-23 Spline 9 in. Dia. Friction Disc 1"-14 Spline

DF201502 DF201614 DF201900 DF201902

84-88 86-02 82-86 83-92

BERETTA-ACHIEVA-GRAND AM (FWD)-SUNFI PONTIAC, FIERO JEEP, SUV, & TRUCKS AMC-CHEV-GMC-JEEP-PONTIAC, CARS, SUV, & TRUCKS CHEVROLET-GMC -PONTIAC, CAMARO, Z-28-ASTRO VAN-SAFARI

E D F F

9-1/8 in. Dia. Friction Disc 1"-14 Spline 9-1/8 in. Dia. Friction Disc 1"-14 Spline 9-1/8 in. Dia. Friction Disc 1"-14 Spline 9-1/8 in. Dia. Friction Disc 1"-14 Spline

DF201904 DF201914 DF201963

VAN-FIREBIRD, TRANS AM 83-93 CHEVROLET-GMC -ISUZU-JEEP, SUV & TRUCKS 80-94 BUICK-CADILLAC-CHEVROLET-OLDS-PONTI, CARS 93-94 CHEVROLET-PONTIAC, CAVALIER, Z24, CORSICA, BERETTA-ASTRE, SUNBIRD,

E E F

9-1/8 in. Dia. Friction Disc 1"-14 Spline 9-1/8 in. Dia. Friction Disc 1"-14 Spline 9-1/8 in. Dia. Friction Disc 1"-14 Spline

DF201965 DF203024 DF204072 DF204910 DF205189 DF206106 DF219188 DF220024 DF226033 DF226049 DF226552 DF227204 DF228035

84-88 71-86 95-99 83-94 96-05 96-99 03-08 74-94 66-87 77-97 77-80 96-98 83-88

J2000 PONTIAC, FIERO FORD-MERCURY, CARS CHEVROLET-PONTIAC, CAVALIER, Z24, CORSICA, BERETTA-SUNFIRE BUICK-CADILLAC-CHEVROLET-OLDS-PONTI, CARS AUDI-VOLKSWAGEN, A4, A4 QUATTRO-PASSAT BMW, 328-528-Z3 FORD LIGHT TRUCK, SUV & VAN, F-SERIES F-100 - F-550 FORD-MERCURY, MUSTANG, MUSTANG II, COBRA-CAPRI FORD, MUSTANG, MUSTANG II, COBRA-F-SERIES F-100 - F-550 FORD-MERCURY, CARS, SUV, TRUCKS, & VANS FORD LIGHT TRUCK, SUV & VAN, BRONCO-F-SERIES F-100 - F-550 AUDI, A4, A4 QUATTRO FORD-MERCURY, MUSTANG, MUSTANG II,

F E F F E F E E D B E F E

9-1/8 in. Dia. Friction Disc 1"-14 Spline 8-1/2 in. Dia. Friction Disc 1"-23 Spline 8-1/2 in. Dia. Friction Disc 1"-14 Spline 8-1/2 in. Dia. Friction Disc 1"-14 Spline 9 in. Dia. Friction Disc 15/16"-23 Spline 9-7/16 in. Dia. Friction Disc 1-1/8"-10 Spline 13 in. Dia. Friction Disc 1-3/8" -10 Spline 8-1/2 in. Dia. Friction Disc 1-1/16"-10 Spline 11 in. Dia. Friction Disc 1-1/16"-10 Spline 11 in. Dia. Friction Disc 1-1/16"-10 Spline 11 in. Dia. Friction Disc 1-1/16"-10 Spline 9-7/16 in. Dia. Friction Disc 15/16"-23 Spline 9 in. Dia. Friction Disc 1-1/16"-10 Spline

DF228202 DF238261 DF240010

COBRA-THUNDERBIRD-CAPRI-COUGAR 96-05 AUDI-VOLKSWAGEN, A4, A4 QUATTRO-A6, A6 QUATTRO-PASSAT 00-04 FORD, FOCUS ZTS & ZX3 01-07 CHEVROLET & GMC LIGHT TRUCK, SUV &, C, G, K, P, R, V, 10-30 SERIES, FULL

F E E

9-7/16 in. Dia. Friction Disc 15/16"-23 Spline 9-7/16 in. Dia. Friction Disc 1"-23 Spline 12 in. Dia. Friction Disc 1-1/8"-10 Spline

DF240098 DF248248 DF252252

SIZE BLAZER, SUBURBAN, 05-09 TOYOTA LIGHT TRUCKS, SUV & VAN, FJ CRUISER-TACOMA, T-100, TUNDRA 86-90 PORSCHE, 944 78-88 PORSCHE, 911-930

D F F

10 7/8 in. Dia. Friction Disc 1-1/8"-21 Spline 9-7/16 in. Dia. Friction Disc 1"-23 Spline 9-7/16 in. Dia. Friction Disc 1"-23 Spline

CUP -0.890

CUP -0.787

CUP -0.350

CUP .286

NOTE: THE APPLICATION INFORMATION LISTED ABOVE IS GENERIC, PLEASE REFFER TO THE APPLICATION SECTION OF THE CATALOG FOR SPECIFIC APPLICATIONS.

POPULARITY RANK EXPLANATION A = FAST MOVER - B = GOOD MOVER - C = FAIR MOVER - D = MODERATE MOVER - E = SLOW ITEM ITEMS LISTED WITH A POPULARITY CODE OF "F" ARE CUSTOM ORDERS THAT CANNOT BE RETURNED THROUGH STOCK ADJUSTMENT

(928) 771-8422 (Voice)

170

(928) 771-8322

(Fax)


PART #

POPULARITY AND INFORMATION LISTING BY ITEM

YEAR APPLICATION

CODE

APPLICATION DIMENSIONS

FW STEP

DUAL FRICTION CLUTCHES DF255255 DF269675 DF269739 DF271056 DF271662 DF271675 DF271739 DF271874 DF284121 DF292271 DF295121 DF295296 DF296058 DF298944 DF305827 DF305828 DF320539 DF325417

75-77 60-87 63-74 70-71 66-71 55-82 67-74 58-79 80-83 01-08 82-87 82-92 87-93 81-89 87-94 93-94 01-06 95-05

PORSCHE, 930 DODGE-PLYMOUTH, CARS, SUV, & TRUCKS DODGE-PLYMOUTH, CARS AMERICAN MOTORS, JAVELIN JEEP, CJ, DJ, TJ, YJ & JK CHEROKEE, COMANCHE, DISPATCHER, SPT WGN, BUICK-CHEVROLET-GMC-OLDSMOBILE-PONT, CARS AMERICAN MOTORS-CHEVROLET-PONTIAC, CARS BUICK-CHEVROLET-GMC-OLDSMOBILE-PONT, CARS DeLOREAN, DeLOREAN HYUNDAI-KIA, SANTA FE-SONATA-TIBURON-OPTIMA BMW, 325-524-528 VOLKSWAGEN, GOLF-JETTA-QUANTUM-RABBIT-SCIROCCO BMW, 325-525i PORSCHE, 944 FORD LIGHT TRUCK, SUV & VAN, F-SERIES F-100 - F-550 FORD LIGHT TRUCK, SUV & VAN, F-SERIES F-100 - F-550 DODGE LIGHT TRUCK, SUV & VAN, RAM 1500, 2500, 3500 CHRYSLER-DODGE-EAGLE-MITSUBISHI-PLY,

E E A F E A B E F E F F F E F F D E

9-7/16 in. Dia. Friction Disc 1"-23 Spline 10.4 in. Dia. Friction Disc 1"-23 Spline 10.4 in. Dia. Friction Disc 1"-23 Spline 10.4 in. Dia. Friction Disc 1-1/8"-10 Spline 10.4 in. Dia. Friction Disc 1-1/8"-10 Spline 10.4 in. Dia. Friction Disc 1-1/8"-10 Spline 10.4 in. Dia. Friction Disc 1-1/8"-10 Spline 10.4 in. Dia. Friction Disc 1-1/8"-10 Spline 9-1/4 in. Dia. Friction Disc 15/16"-21 Spline 8-7/8 in. Dia. Friction Disc 7/8"-20 Spline 8-63/64 in. Dia. Friction Disc 1-1/8"-10 Spline 8-1/4 in. Dia. Friction Disc 13/16"-24 Spline 8-63/64 in. Dia. Friction Disc 1-1/8"-10 Spline 8-7/8 in. Dia. Friction Disc 1"-23 Spline 12-1/4 in. Dia. Friction Disc 1-1/4"-10 Spline 12-1/4 in. Dia. Friction Disc 1-1/4"-10 Spline 13 in. Dia. Friction Disc 1-3/8"-10 Spline 9 in. Dia. Friction Disc 15/16"-17 Spline

DF325450 DF346345 DF374138 DF391200 DF395010 DF413523 DF440178 DF444440 DF489989 DF490025

00-06 89-95 70-85 02-07 97-10 05-09 03-08 94-97 94-04 79-85

CIRRUS-SEBRING-AVENGER-NEON-STRATUS-TALON-ECLIPSE, ECLIPSE S CHRYSLER, PT CRUISER FORD, TAURUS FORD-MAZDA, COURIER-RX-PICK UPS ACURA-HONDA, RSX-CIVIC CHEVROLET-PONTIAC, CAMARO, Z-28-CORVETTE-FIREBIRD, TRANS AM-GTO DODGE LIGHT TRUCK, SUV & VAN, RAM 1500, 2500, 3500 DODGE LIGHT TRUCK, SUV & VAN, RAM 1500, 2500, 3500 FORD LIGHT TRUCK, SUV & VAN, F-SERIES F-100 - F-550 DODGE LIGHT TRUCK, SUV & VAN, RAM 1500, 2500, 3500 FORD-MERCURY, FAIRMONT, MAVERICK-MUSTANG, MUSTANG II,

F E E E A C E F B D

9 in. Dia. Friction Disc 15/16"-17 Spline 9-3/4 in. Dia. Friction Disc 7/8"-20 Spline 8-19/32 in. Dia. Friction Disc 15/16"-22 Spline 8-1/2" in. Dia. Friction Disc 1-1/32"-24 Spline 12 in. Dia. Friction Disc 1-1/8"-26 Spline 13 in. Dia. Friction Disc 1-3/8"-10 Spline 12 in. Dia. Friction Disc 1-1/8"-10 Spline 13 in. Dia. Friction Disc 1-1/4"-10 Spline 12-1/4 in. Dia. Friction Disc 1-1/4"-10 Spline 10 in. Dia. Friction Disc 1-1/16"-10 Spline

DF490030 DF490309 DF494150 DF500100 DF500300 DF500500 DF501009 DF501110

63-80 05-07 86-92 87-92 85-97 80-82 87-96

COBRA-CAPRI-ZEPHYR FORD-MERCURY, CARS FORD, MUSTANG, MUSTANG II, COBRA TOYOTA LAND CRUISER "SPECIAL ORDER", TOYOTA, SUPRA FORD-MAZDA, PROBE, GT-626-MX-6 NISSAN-DATSUN, 300-PATHFINDER-PICK UPS, FRONTIER TOYOTA, COROLLA TOYOTA LIGHT TRUCKS, SUV & VAN, PICK UPS & 4RUNNER (ALSO SEE:

A C B E F E F D

10 in. Dia. Friction Disc 1-1/16"-10 Spline 10 in. Dia. Friction Disc 1-1/16"-10 Spline

DF501210 DF502502 DF503003 DF504076 DF504965 DF505018 DF505019

73-79 89-96 92-93 96-02 93-95 02-05 94-04

TACOMA, T-100, TUNDRA)-TACOMA, HONDA, CIVIC NISSAN-DATSUN, 300 MAZDA, MX-3 CHEVROLET-PONTIAC, CAMARO, Z-28-FIREBIRD, TRANS AM CHEVROLET-PONTIAC, CAMARO, Z-28-FIREBIRD, TRANS AM LEXUS, IS-300 TOYOTA LIGHT TRUCKS, SUV & VAN, PICK UPS & 4RUNNER (ALSO SEE:

F E F E F NEW-D D

DF505120

TACOMA, T-100, TUNDRA)-TACOMA, 92-09 TOYOTA LIGHT TRUCKS, SUV & VAN, PICK UPS & 4RUNNER (ALSO SEE:

DF505156 DF506210 DF506276 DF507006 DF507222 DF508340 DF510001

02-05 84-87 67-73 88-88 89-89 83-89 81-90

TACOMA, T-100, TUNDRA)-TACOMA, LEXUS, IS-300 HONDA, CIVIC-CRX NISSAN-DATSUN, 510-610-PICK UPS, FRONTIER HONDA, CIVIC-CRX HONDA, CIVIC-CRX ACURA-HONDA, INTEGRA-ACCORD-PRELUDE DODGE-MITSUBISHI-PLYMOUTH, D-50 & RAM 50 PICK-UPS-RAIDER-PICK

DF510150

UPS-ARROW 93-98 TOYOTA, SUPRA

CUP -0.315 STEP 0.011 CUP -0.920 STEP 0.011

CUP -0.315

9-1/4 in. Dia. Friction Disc 1-1/8"-21 Spline 9-7/16 in. Dia. Friction Disc 1"-23 Spline 9-3/4 in. Dia. Friction Disc 1"-24 Spline 8-3/8 in. Dia. Friction Disc 15/16"-21 Spline 9-1/4 in. Dia. Friction Disc 1-1/8"-21 Spline

STEP .018 STEP 0.020 STEP 0.004 STEP 0.018 STEP 0.018

7-1/2 in. Dia. Friction Disc 13/16"-19 Spline 9-3/4 in. Dia. Friction Disc 1"-24 Spline 8-19/32 in. Dia. Friction Disc 15/16"-22 Spline 9-11/16 in. Dia. Friction Disc 1-1/8"-26 Spline 9-11/16 in. Dia. Friction Disc 1-1/8"-26 Spline 9-1/4 in. Dia. Friction Disc 1-1/8"-21 Spline 10 in. Dia. Friction Disc 1-1/8"-21 Spline

CUP -0.787 STEP 0.004 CUP -0.787

10 in. Dia. Friction Disc 1-1/8"-21 Spline

STEP 0.018

NEW-C F F F E F F

9-1/4 in. Dia. Friction Disc 1-1/8"-21 Spline 7-1/2 in. Dia. Friction Disc 13/16"-19 Spline 7-7/8 in. Dia. Friction Disc 1"-24 Spline 7-7/8 in. Dia. Friction Disc 7/8"-21 Spline 7-7/8 in. Dia. Friction Disc 7/8"-20 Spline 7-7/8 in. Dia. Friction Disc 7/8"-21 Spline 8-19/32 in. Dia. Friction Disc 1"-23 Spline

STEP 0.018 CUP -0.105 STEP 0.004 CUP -0.024 CUP -0.024 CUP -0.033

E

9-3/4 in. Dia. Friction Disc 1-1/4"-14 Spline

E

STEP 0.018 STEP 0.018

NOTE: THE APPLICATION INFORMATION LISTED ABOVE IS GENERIC, PLEASE REFFER TO THE APPLICATION SECTION OF THE CATALOG FOR SPECIFIC APPLICATIONS.

POPULARITY RANK EXPLANATION A = FAST MOVER - B = GOOD MOVER - C = FAIR MOVER - D = MODERATE MOVER - E = SLOW ITEM ITEMS LISTED WITH A POPULARITY CODE OF "F" ARE CUSTOM ORDERS THAT CANNOT BE RETURNED THROUGH STOCK ADJUSTMENT

(928) 771-8422 (Voice)

171

(928) 771-8322

(Fax)


PART #

POPULARITY AND INFORMATION LISTING BY ITEM

YEAR APPLICATION

CODE

APPLICATION DIMENSIONS

FW STEP

DUAL FRICTION CLUTCHES DF511276 DF512009 DF512626 DF515004 DF515008 DF516012 DF517010

73-81 86-95 80-87 82-87 70-82 88-02 71-96

NISSAN-DATSUN, 200SX-510-610-710 SUZUKI, SAMURAI-SIDEKICK CHEV-ISUZU LIGHT TRUCK, SUV & VAN, LUV-PICK UPS-TROOPER DODGE-MITSUBISHI-PLYMOUTH, CONQUEST-STARION-CONQUEST TOYOTA, COROLLA DODGE-EAGLE-HYUNDAI-MITSU-PLYM, CARS TOYOTA, CELICA-CORONA-SUPRA-PICK UPS & 4RUNNER (ALSO SEE: TACOMA,

F B F F F F C

7-7/8 in. Dia. Friction Disc 1"-24 Spline 7-1/2 in. Dia. Friction Disc 7/8"-20 Spline 8-19/32 in. Dia. Friction Disc 1"-24 Spline 8-7/8 in. Dia. Friction Disc 1"-23 Spline 7-7/8 in. Dia. Friction Disc 15/16"-21 Spline 8-19/32 in. Dia. Friction Disc 7/8"-20 Spline 8-7/8 in. Dia. Friction Disc 1-1/8"-21 Spline

DF517020 DF517031 DF518005 DF518006 DF518043 DF518098 DF518732 DF519021 DF519080 DF522018 DF527007

89-95 89-01 84-89 73-02 74-87 80-P. 79-P. 91-02 92-93 81-04 89-04

TGEO-SUZUKI, TRACKER-SIDEKICK TOYOTA, CAMRY-CELICA-SOLARA HONDA, ACCORD-PRELUDE DODGE-EAGLE-HYUNDAI-MITSU-PLYM, CARS TOYOTA LIGHT TRUCKS, SUV & VAN, LAND CRUISER TOYOTA LIGHT TRUCKS, SUV & VAN, LAND CRUISER NISSAN-DATSUN, PATROL GEO-SUZUKI, TRACKER-SIDEKICK-VITARA-X-90 TOYOTA LIGHT TRUCKS, SUV & VAN, LAND CRUISER LEXUS-TOYOTA, CARS, SUV, TRUCKS, & VANS NISSAN-DATSUN LIGHT TRUCK, SUV & VA, AXXESS-PICK UPS,

E F F F C F E E E D F

8-1/2 in. Dia. Friction Disc 7/8"-20 Spline 8-7/8 in. Dia. Friction Disc 1-1/8"-20 Spline 8-3/8 in. Dia. Friction Disc 7/8"-21 Spline 7-7/8 in. Dia. Friction Disc 7/8"-20 Spline 10-13/16 in. Dia. Friction Disc 1-1/8"-10 Spline 10-13/16 in. Dia. Friction Disc 1-1/8"-21 Spline 10-13/16 in. Dia. Friction Disc 1"-24 Spline 8-1/2 in. Dia. Friction Disc 7/8"-20 Spline 11-3/4 in. Dia. Friction Disc 1"-14 Spline 9-1/4 in. Dia. Friction Disc 1-1/8"-21 Spline 9-7/16 in. Dia. Friction Disc 1"-24 Spline

DF530222 DF532009 DF532277 DF533277 DF534007 DF535007 DF536010 DF537033 DF538018 DF538034

96-97 81-89 83-88 84-86 81-96 87-93 86-05 87-90 86-87 88-01

FRONTIER-XTERRA HONDA, DEL SOL MAZDA, RX-PICK UPS NISSAN-DATSUN, 200SX NISSAN-DATSUN, 200SX NISSAN-DATSUN, 200SX-280-300 MAZDA LIGHT TRUCK, SUV & VAN, PICK UPS CHRYSLER-DODGE-EAGLE-MITSUBISHI-PLY, CARS DODGE-MITSUBISHI-PLYMOUTH, CONQUEST-STARION-CONQUEST MAZDA LIGHT TRUCK, SUV & VAN, PICK UPS DODGE-MITSUBISHI-LIGHT TRUCK, SUV &, D-50 & RAM 50

F E F F E F D F F E

8-1/4 in. Dia. Friction Disc 7/8"-20 Spline 8-7/8 in. Dia. Friction Disc 15/16"-22 Spline 8-7/8 in. Dia. Friction Disc 1"-24 Spline 8-7/8 in. Dia. Friction Disc 1"-24 Spline 9-7/16 in. Dia. Friction Disc 1"-24 Spline 8-7/8 in. Dia. Friction Disc 15/16"-22 Spline 8-7/8 in. Dia. Friction Disc 7/8-20 Spline 9-7/16 in. Dia. Friction Disc 1"-23 Spline 8-7/8 in. Dia. Friction Disc 15/16"-22 Spline 9-7/16 in. Dia. Friction Disc 1-3/16"-14 Spline

DF538822 DF541042 DF542035 DF543007 DF543056 DF544020 DF547023

02-07 86-99 85-08 82-92 88-02 86-89 87-03

PICK-UPS-RAIDER-MONTERO, MONTERO SPORT-PICK UP ACURA-HONDA, RSX-CIVIC NISSAN-DATSUN, 200SX-NX COUPE-PULSAR-SENTRA GEO-TOYOTA, PRIZM-CELICA-COROLLA-MATRIX-MR-2 MAZDA, 323, GLC-626 FORD-MAZDA, PROBE, GT-626-MX-6-PROTEGE MAZDA, RX-PICK UPS HONDA-ISUZU LIGHT TRUCK, SUV & VAN, PASSPORT-AMIGO-PICK

E E E F E E F

8-7/16 in. Dia. Friction Disc 1"-24 Spline 7-1/2 in. Dia. Friction Disc 13/16"-18 Spline 8-3/8 in. Dia. Friction Disc 15/16"-21 Spline 8-7/8 in. Dia. Friction Disc 15/16"-22 Spline 8-7/8 in. Dia. Friction Disc 15/16"-22 Spline 9-7/16 in. Dia. Friction Disc 1"-23 Spline 9-7/16 in. Dia. Friction Disc 1"-24 Spline

DF547035 DF549035 DF551432 DF553020 DF559000 DF559033 DF560132 DF561133

89-93 00-09 86-93 87-99 65-71 65-71 88-92 02-05

UPS-RODEO-TROOPER NISSAN-DATSUN, STANZA-AXXESS PONTIAC-SCION-TOYOTA, VIBE-xA,xB-ECHO-MR-2-YARIS TOYOTA, TERCEL TOYOTA, COROLLA-PASEO-TERCEL FORD, FAIRLANE-GALAXIE-MUSTANG, MUSTANG II, COBRA-TORINO FORD, FAIRLANE-GALAXIE-MUSTANG, MUSTANG II, COBRA-TORINO ISUZU LIGHT TRUCK, SUV & VAN, TROOPER CHEVROLET-OLDSMOBILE-PONTIAC, CAVALIER, Z24, CORSICA,

F E F F D C F F

8-7/8 in. Dia. Friction Disc 1"-24 Spline 8-3/8 in. Dia. Friction Disc 15/16"-21 Spline 7-7/8 in. Dia. Friction Disc 15/16"-21 Spline 7-7/8 in. Dia. Friction Disc 15/16"-21 Spline 11 in. Dia. Friction Disc 1-3/8"-10 Spline 11 in. Dia. Friction Disc 1-3/8"-10 Spline 9-1/8 in. Dia. Friction Disc 1"-24 Spline 9 in. Dia. Friction Disc 1"-14 Spline

DF569040 DF570841 DF580019 DF581053 DF581780 DF582279 DF583402

91-94 06-09 94-05 89-93 77-99 74-99 69-98

BERETTA-ALERO-GRAND AM (FWD)-SUNFIRE ISUZU LIGHT TRUCK, SUV & VAN, PICK UPS-RODEO FORD, MUSTANG, MUSTANG II, COBRA MAZDA, MIATA, MX-5 MAZDA, MIATA, MX-5 DODGE-MITSUBISHI-PLYMOUTH, CARS, SUV, & TRUCKS NISSAN-DATSUN, 280-PATHFINDER-PICK UPS, FRONTIER NISSAN-DATSUN, 200SX-240-260-280-MAXIMA-PICK UPS, FRONTIER-QUEST,

F D F E F E B

9-5/8 in. Dia. Friction Disc 1"-24 Spline 11 in. Dia. Friction Disc 1-1/8"-26 Spline 8-7/8 in. Dia. Friction Disc 15/16"-22 Spline 7-7/8 in. Dia. Friction Disc 15/16"-22 Spline 8-7/8 in. Dia. Friction Disc 1"-23 Spline 9-7/16 in. Dia. Friction Disc 1"-24 Spline 8-7/8 in. Dia. Friction Disc 1"-24 Spline

DF584058 DF585007

VAN 89-91 MAZDA, RX 90-P. MAZDA LIGHT TRUCK, SUV & VAN, PICK UPS

F F

9-1/8 in. Dia. Friction Disc 1"-23 Spline 8-7/8 in. Dia. Friction Disc 15/16"-22 Spline

STEP 0.004 CUP -0..090 CUP -0.008 STEP 0.018 STEP 0.018

STEP 0.018 CUP -0.615 STEP 0.018 STEP 0.018 STEP 0.004

STEP 0.018

CUP -0.630 STEP 0.004 STEP 0.004 STEP 0.004 CUP -0.787 CUP -0.608 CUP -0.787

STEP 0.004 STEP 0.018 CUP -0.787 CUP -0.787 CUP -0.155 STEP 0.004 STEP 0.018 STEP 0.018

CUP -0.790 STEP 0.021 STEP 0.004 STEP 0.004

CUP -0.787

NOTE: THE APPLICATION INFORMATION LISTED ABOVE IS GENERIC, PLEASE REFFER TO THE APPLICATION SECTION OF THE CATALOG FOR SPECIFIC APPLICATIONS.

POPULARITY RANK EXPLANATION A = FAST MOVER - B = GOOD MOVER - C = FAIR MOVER - D = MODERATE MOVER - E = SLOW ITEM ITEMS LISTED WITH A POPULARITY CODE OF "F" ARE CUSTOM ORDERS THAT CANNOT BE RETURNED THROUGH STOCK ADJUSTMENT

(928) 771-8422 (Voice)

172

(928) 771-8322

(Fax)


PART #

POPULARITY AND INFORMATION LISTING BY ITEM

YEAR APPLICATION

CODE

APPLICATION DIMENSIONS

FW STEP

DUAL FRICTION CLUTCHES DF591059 DF593010 DF600702 DF604072 DF611679 DF611739 DF612010 DF612909 DF613004 DF620459 DF633140 DF633500 DF633850 DF641101 DF649645 DF670668 DF700000 DF735000 DF735049 DF735473 DF735473S DF735552 DF735877 DF776772 DF777772 DF778106 DF784778 DF786780 DF793049 DF793252 DF800075 DF824878 DF850850 DF875740

89-92 10-11 04-08 94-95 05-10 65-73 05-07 71-83 94-01 02-06 02-06 00-04 02-06 03-09 86-95 85-94 63-77 67-94 55-76 63-95 85-95 87-89 91-93 95-99 89-91 89-99 91-97 91-91 99-04 79-83 02-06 96-02

MAZDA, RX CHEVROLET, CAMARO, Z-28 FORD, FOCUS ZTS & ZX3 MAZDA, MX-3 FORD, MUSTANG, MUSTANG II, COBRA FORD, MUSTANG, MUSTANG II, COBRA CADILLAC-CHEVROLET, CTS-V-CORVETTE-CRATE ENGINES-SSR BUICK-CHEVROLET-GMC-OLDSMOBILE-PONT, CARS MAZDA, MX-3-PROTEGE MITSUBISHI, LANCER INFINITI-NISSAN-DATSUN, G-35-350Z-ALTIMA-MAXIMA NISSAN-DATSUN LIGHT TRUCK, SUV & VA, PICK UPS, FRONTIER-XTERRA NISSAN-DATSUN, ALTIMA-SENTRA MAZDA, RX BMW, 325-524-525i-528 VOLKSWAGEN, GOLF-JETTA-RABBIT-SCIROCCO FORD-MERCURY, CARS, SUV, TRUCKS, & VANS FORD LIGHT TRUCK, SUV & VAN, BRONCO GM/FORD (Special), CHEVROLET-GMC LIGHT TRUCK, SUV & VA, CARS, SUV, TRUCKS, & VANS CHEVY/TOYOTA FOR ADVANCE ADAPTERS &, BUICK-CHEVROLET-GMC-JEEP-OLDS-PONTI, CARS CHEVROLET & GMC LIGHT TRUCK, SUV &, SUV, TRUCKS, & VANS BMW, M5-M6-M635 BMW, M5 BMW, M3 PORSCHE, 944 VOLKSWAGEN, CORRADO-GOLF-JETTA-PASSAT PORSCHE, 911-993 PORSCHE, 930 FORD, MUSTANG, MUSTANG II, COBRA AMERICAN MOTORS-JEEP, JEEP - SUV & TRUCK NISSAN-DATSUN, ALTIMA-SENTRA CHEVROLET & GMC LIGHT TRUCK, SUV &, C, G, K, P, R, V, 10-30 SERIES, FULL

F C F F A E E C F E E NEW-C NEW-D D F F A E F F E A D F F F E F F F A F E F

8-7/8 in. Dia. Friction Disc 15/16"-22 Spline 12 in. Dia. Friction Disc 1-1/8"-26 Spline 9-7/16 in. Dia. Friction Disc 1"-23 Spline 8-7/8 in. Dia. Friction Disc 15/16"-22 Spline 11 in. Dia. Friction Disc 1-1/16"-10 Spline 10.4 in. Dia. Friction Disc 1-1/8"-26 Spline 12 in. Dia. Friction Disc 1-1/8"-26 Spline 12 in. Dia. Friction Disc 1-1/8"-26 Spline 7-7/8 in. Dia. Friction Disc 7/8"-20 Spline 8-1/2 in. Dia. Friction Disc 7/8"-20 Spline 9-3/4 in. Dia. Friction Disc 1"-24 Spline 9-3/4" in. Dia. Friction Disc 1"-24 Spline 9-3/4 in. Dia. Friction Disc 1"-24 Spline 9-1/4 in. Dia. Friction Disc 1"-23 Spline 8-63/64 in. Dia. Friction Disc 1-1/8"-10 Spline 8-1/4 in. Dia. Friction Disc 7/8"-28 Spline 11 in. Dia. Friction Disc 1-1/16"-10 Spline 11 in. Dia. Friction Disc 1-1/8"-10 Spline

DF900003 DF900018 DF900800 DF901007 DF902802 DF905018 DF907084 DF908806 DF909807 DF910279 DF911808 DF912053

93-02 87-06 92-01 86-99 90-00 89-07 90-95 90-03 90-91 99-01 00-07 96-04

DF914812 DF915015 DF916035 DF918802 DF920830 DF930140 DF932057 DF935944 DF940940 DF942941

91-06 92-02 93-01 01-05 96-98 94-95 06-06 99-04 99-07 99-04

CUP -0.630

SIZE BLAZER, SUBURBAN, FORD-MAZDA, PROBE, GT-626-MX-6 LEXUS-TOYOTA, ES-250-ES-300-CAMRY-CELICA-SOLARA-RAV4 ACURA-HONDA, INTEGRA-CIVIC-CR-V-DEL SOL INFINITI-NISSAN-DATSUN, I-30-MAXIMA HONDA, CIVIC-CRX-DEL SOL SCION-TOYOTA, tC-CAMRY-CELICA-MR-2-SOLARA-RAV4 TOYOTA, MR-2 ACURA-HONDA, CL-ACCORD ACURA, INTEGRA NISSAN-DATSUN, MAXIMA HONDA, S-2000 NISSAN-DATSUN LIGHT TRUCK, SUV & VA, PATHFINDER-PICK UPS,

F F E E D E E E F E E E

8-7/8 in. Dia. Friction Disc 15/16"-22 Spline 9-1/4 in. Dia. Friction Disc 1-1/8"-21 Spline 8-5/8 in. Dia. Friction Disc 1-1/32"-24 Spline 9-7/16 in. Dia. Friction Disc 1"-24 Spline 8-3/8 in. Dia. Friction Disc 7/8"-20 Spline 9-1/4 in. Dia. Friction Disc 1-1/8"-21 Spline 8-7/8 in. Dia. Friction Disc 1-1/8"-20 Spline 8-7/8 in. Dia. Friction Disc 1-1/32"-24 Spline 8-5/8 in. Dia. Friction Disc 1"-24 Spline 9-7/16 in. Dia. Friction Disc 1"-24 Spline 8-3/8 in. Dia. Friction Disc 1-1/32"-24 Spline 9-3/4 in. Dia. Friction Disc 1"-24 Spline

CUP -0.298 STEP 0.018 STEP 0.110 STEP 0.004 CUP -0.065 STEP 0.018 STEP 0.018 CUP -0.069 STEP 0.112

FRONTIER-XTERRA INFINITI-NISSAN-DATSUN, G-20-200SX-NX COUPE-SENTRA HONDA, PRELUDE NISSAN-DATSUN, ALTIMA HONDA, CIVIC FORD, MUSTANG, MUSTANG II, COBRA CHEVROLET, CORVETTE FORD, TORNADO-TYPHOON FORD LIGHT TRUCK, SUV & VAN, F-SERIES F-100 - F-550 FORD LIGHT TRUCK, SUV & VAN, F-SERIES F-100 - F-550 FORD LIGHT TRUCK, SUV & VAN, F-SERIES F-100 - F-550

E E F E D F F E E E

8-1/2 in. Dia. Friction Disc 13/16"-18 Spline 8-5/8 in. Dia. Friction Disc 1-1/32"-24 Spline 8-7/8 in. Dia. Friction Disc 1"-24 Spline 8-3/8 in. Dia. Friction Disc 7/8"-20 Spline 10.4 in. Dia. Friction Disc 1-1/16"-10 Spline 11 in. Dia. Friction Disc 1-1/8"-26 Spline 10.4 in. Dia. Friction Disc 1"-23 Spline 13 in. Dia. Friction Disc 1-3/8"-10 Spline 12 in. Dia. Friction Disc 1-1/4"-10 Spline 11.5 in. Dia. Friction Disc 1-1/16"-10 Spline

STEP 0.007 CUP -0.069

CUP .250 STEP 0.011

CUP -0.920

11 in. Dia. Friction Disc 1-1/8"-10 Spline 11 in. Dia. Friction Disc 1-1/8"-10 Spline 11 in. Dia. Friction Disc 1-1/8"-10 Spline 9-7/16 in. Dia. Friction Disc 1-1/8"-10 Spline 9-7/16 in. Dia. Friction Disc 1-1/8"-10 Spline 9-7/16 in. Dia. Friction Disc 1-1/8"-10 Spline 8-7/8 in. Dia. Friction Disc 1"-23 Spline 9 in. Dia. Friction Disc 7/8"-28 Spline 9-7/16 in. Dia. Friction Disc 1"-23 Spline 9-7/16 in. Dia. Friction Disc 1"-23 Spline 11 in. Dia. Friction Disc 1-1/16"-10 Spline 9-1/8 in. Dia. Friction Disc 1-1/8"-10 Spline 9-1/2 in. Dia. Friction Disc 1"-24 Spline 12 in. Dia. Friction Disc 1-1/8"-10 Spline

STEP 0.011 STEP 0.011 STEP 0.011 CUP -0.500

CUP -0.125

STEP 0.067

NOTE: THE APPLICATION INFORMATION LISTED ABOVE IS GENERIC, PLEASE REFFER TO THE APPLICATION SECTION OF THE CATALOG FOR SPECIFIC APPLICATIONS.

POPULARITY RANK EXPLANATION A = FAST MOVER - B = GOOD MOVER - C = FAIR MOVER - D = MODERATE MOVER - E = SLOW ITEM ITEMS LISTED WITH A POPULARITY CODE OF "F" ARE CUSTOM ORDERS THAT CANNOT BE RETURNED THROUGH STOCK ADJUSTMENT

(928) 771-8422 (Voice)

173

(928) 771-8322

(Fax)

N/A


PART #

POPULARITY AND INFORMATION LISTING BY ITEM

YEAR APPLICATION

CODE

APPLICATION DIMENSIONS

FW STEP

DUAL FRICTION CLUTCHES DF945520 DF946909 DF947483 DF950600 DF962962 DF963975 DF968968 DF973973 DF974974 DF975975 DF983982 DF985985 DF987983

90-00 69-81 93-06 93-96 92-93 94-09 93-98 94-99 94-04 94-07 97-05 92-06 92-95

DODGE-MITSUBISHI-MITSUBISHI, STEALTH-3000GT DODGE LIGHT TRUCK, SUV & VAN, SERIES 100, 200, 300, RAMCHARGER & VAN SUBARU, BAJA-FORESTER-IMPREZA-LEGACY-OUTBACK MAZDA, RX DODGE LIGHT TRUCK, SUV & VAN, SERIES 100, 200, 300, RAMCHARGER & VAN FORD-MAZDA LIGHT TRUCK, SUV & VAN-M, RANGER-PICK UPS FORD LIGHT TRUCK, SUV & VAN, F-SERIES F-100 - F-550 DODGE-PLYMOUTH, NEON FORD, MUSTANG, MUSTANG II, COBRA FORD-MAZDA LIGHT TRUCK, SUV & VAN-M, RANGER-PICK UPS FORD LIGHT TRUCK, SUV & VAN, F-SERIES F-100 - F-550 DODGE, VIPER-RAM 1500, 2500, 3500 CHEVROLET & GMC LIGHT TRUCK, SUV &, C, G, K, P, R, V, 10-30 SERIES, FULL

E E E E F E E E E E E C E

9-3/4 in. Dia. Friction Disc 1"-23 Spline 12 in. Dia. Friction Disc 1"-23 Spline 8-7/8 in. Dia. Friction Disc 1"-24 Spline 9-1/4 in. Dia. Friction Disc 1"-23 Spline 11 in. Dia. Friction Disc 1"-19 Spline 8-7/8 in. Dia. Friction Disc 1"-23 Spline 12-1/4 in. Dia. Friction Disc 1-1/4"-10 Spline 9 in. Dia. Friction Disc 15/16"-17 Spline 11 in. Dia. Friction Disc 1-1/16"-10 Spline 9-1/8 in. Dia. Friction Disc 1"-23 Spline 11-1/2 in. Dia. Friction Disc 1-1/16"-10 Spline 12-1/4 in. Dia. Friction Disc 1-1/8"-26 Spline 12 in. Dia. Friction Disc 1-1/8"-10 Spline

CUP -0.825

DF988988 DF989966 DF991002 DF993993 DF997997

95-02 88-93 72-86 98-00 01-07

SIZE BLAZER, SUBURBAN, FORD-MERCURY, CONTOUR-COUGAR-MYSTIQUE DODGE LIGHT TRUCK, SUV & VAN, RAM 1500, 2500, 3500 PORSCHE, 911 FORD-MAZDA LIGHT TRUCK, SUV & VAN-M, EXPLORER-RANGER-PICK UPS CHEVROLET & GMC LIGHT TRUCK, SUV &, C, G, K, P, R, V, 10-30 SERIES, FULL

E NEW-D F E E

9-7/16 in. Dia. Friction Disc 1"-23 Spline 12-1/4 in. Dia. Friction Disc 1-1/4"-10 Spline 8-7/8 in. Dia. Friction Disc 3/4"-20 Spline 10-5/16 in. Dia. Friction Disc 1"-23 Spline 12 in. Dia. Friction Disc 1-1/8"-10 Spline

CUP -0.472

CUP -0.300

SIZE BLAZER, SUBURBAN,

DFX SERIES CLUTCHES 01010249 01011401 01017010 01023500 01039000 01039020 01070800 01071800

04-07 02-04 97-05 11-11 89-93 93-97 68-74 63-69

CHEVROLET-SATURN, COBALT-ION FORD, FOCUS ZTS & ZX3 CHEVROLET-PONTIAC, CAMARO, Z-28-CORVETTE-FIREBIRD, TRANS AM-GTO FORD, MUSTANG, MUSTANG II, COBRA CHEVROLET, 11" Dia. 1-1/8"-26 Spline CHEVROLET-PONTIAC, CAMARO, Z-28-CRATE ENGINES-FIREBIRD, TRANS AM DODGE-PLYMOUTH, CARS DODGE, DART, DIPLOMAT, DEMON, GTS, SUPER BEE, ASPEN, CHALLENGER,

E NEW-C C NEW-C E E NEW-D NEW-D

9-1/8" in. Dia. Friction Disc 1"-14 Spline 9-1/8 in. Dia. Friction Disc 1"-14 Spline 11 in. Dia. Friction Disc 1-1/8"-26 Spline 11 in. Dia. Friction Disc 1"-23 Spline 11 in. Dia. Friction Disc 1-1/8-26 Spline 11 in. Dia. Friction Disc 1-1/8-26 Spline 11 in. Dia. Friction Disc 1"-23 Spline 11 in. Dia. Friction Disc 1-3/16"-18 Spline

01148033 01148075 01148552 01148679 01161056

65-87 99-04 71-83 05-10 32-92

CH FORD, FAIRLANE-GALAXIE-MUSTANG, MUSTANG II, COBRA-TORINO-F-SERIES FORD, MUSTANG, MUSTANG II, COBRA BUICK-CHEVROLET-GMC-OLDSMOBILE-PONT, CARS FORD, MUSTANG, MUSTANG II, COBRA CHEVROLET-FORD-PONTIAC, CAMARO, Z-28-CRATE

NEW-D D C E E

11 in. Dia. Friction Disc 1-1/8"-26 Spline 11 in. Dia. Friction Disc 1-1/8"-26 Spline 11 in. Dia. Friction Disc 1-1/8"-26 Spline 11 in. Dia. Friction Disc 1-1/8"-26 Spline 10.4 in. Dia. Friction Disc 1-1/8"-26 Spline

01161739 01161830 01226033 01226049 01226552 01228035

71-83 86-01 66-87 77-97 77-80 83-88

ENGINES-FLATHEAD-FIREBIRD, TRANS AM BUICK-CHEVROLET-OLDSMOBILE-PONTIAC, CARS & CRATE ENGINES FORD, MUSTANG, MUSTANG II, COBRA FORD, MUSTANG, MUSTANG II, COBRA-F-SERIES F-100 - F-550 FORD-MERCURY, CARS, SUV, TRUCKS, & VANS FORD LIGHT TRUCK, SUV & VAN, BRONCO-F-SERIES F-100 - F-550 FORD-MERCURY, MUSTANG, MUSTANG II,

F E NEW-D NEW-C F F

10.4 in. Dia. Friction Disc 1-1/8"-26 Spline 10.4 in. Dia. Friction Disc 1-1/8"-26 Spline 11 in. Dia. Friction Disc 1-1/16"-10 Spline 11 in. Dia. Friction Disc 1-1/16"-10 Spline 11 in. Dia. Friction Disc 1-1/16"-10 Spline 9 in. Dia. Friction Disc 1-1/16"-10 Spline

01271739 01320539 01395010 01413523 01441003 01489989 01500100 01510150 01522018 01536010 01544020 01570841 01611679 01735552 01800075

63-82 01-06 97-10 05-09 09-10 94-04 86-92 93-98 81-04 86-05 86-09 06-09 05-10 63-84 99-04

COBRA-THUNDERBIRD-CAPRI-COUGAR AMC-BUICK-CHEVROLET-GMC-OLDS-PONTIA, CARS DODGE LIGHT TRUCK, SUV & VAN, RAM 1500, 2500, 3500 CHEVROLET-PONTIAC, CAMARO, Z-28-CORVETTE-FIREBIRD, TRANS AM-GTO DODGE LIGHT TRUCK, SUV & VAN, RAM 1500, 2500, 3500 FORD, MUSTANG, MUSTANG II, COBRA DODGE LIGHT TRUCK, SUV & VAN, RAM 1500, 2500, 3500 TOYOTA, SUPRA TOYOTA, SUPRA LEXUS-TOYOTA, CARS, SUV, TRUCKS, & VANS CHRYSLER-DODGE-EAGLE-MITSUBISHI-PLY, CARS MAZDA, RX-PICK UPS FORD, MUSTANG, MUSTANG II, COBRA FORD, MUSTANG, MUSTANG II, COBRA BUICK-CHEVROLET-GMC-JEEP-OLDS-PONTI, CARS FORD, MUSTANG, MUSTANG II, COBRA

E E NEW-B E NEW-D E NEW-C F NEW-C E E E E D E

10.4 in. Dia. Friction Disc 1-1/8"-10 Spline 13 in. Dia. Friction Disc 1-3/8"-10 Spline 12 in. Dia. Friction Disc 1-1/8"-26 Spline 13 in. Dia. Friction Disc 1-3/8"-10 Spline 11 in. Dia. Friction Disc 1-1/8"-26 Spline 12-1/4 in. Dia. Friction Disc 1-1/4"-10 Spline 9-1/4 in. Dia. Friction Disc 1-1/8"-21 Spline 9-3/4 in. Dia. Friction Disc 1-1/4"-14 Spline 9-1/4 in. Dia. Friction Disc 1-1/8"-21 Spline 8-7/8 in. Dia. Friction Disc 7/8-20 Spline 9-1/4 in. Dia. Friction Disc 1"-23 Spline 11 in. Dia. Friction Disc 1-1/8"-26 Spline 11 in. Dia. Friction Disc 1-1/16"-10 Spline 11 in. Dia. Friction Disc 1-1/8"-10 Spline 11 in. Dia. Friction Disc 1-1/16"-10 Spline

STEP .018 STEP 0.018

NOTE: THE APPLICATION INFORMATION LISTED ABOVE IS GENERIC, PLEASE REFFER TO THE APPLICATION SECTION OF THE CATALOG FOR SPECIFIC APPLICATIONS.

POPULARITY RANK EXPLANATION A = FAST MOVER - B = GOOD MOVER - C = FAIR MOVER - D = MODERATE MOVER - E = SLOW ITEM ITEMS LISTED WITH A POPULARITY CODE OF "F" ARE CUSTOM ORDERS THAT CANNOT BE RETURNED THROUGH STOCK ADJUSTMENT

(928) 771-8422 (Voice)

174

(928) 771-8322

(Fax)


PART #

POPULARITY AND INFORMATION LISTING BY ITEM

YEAR APPLICATION

CODE

APPLICATION DIMENSIONS

FW STEP

DFX SERIES CLUTCHES 01900800 01902802 01905018 01909807 01911808 01920830 01935944 01950600 01989966 11165552 11228035

92-01 90-05 87-07 90-91 00-07 81-01 99-04 93-96 88-93 63-84 83-88

ACURA-HONDA, INTEGRA-CIVIC-CR-V-DEL SOL HONDA, CIVIC-CRX-DEL SOL LEXUS-SCION-TOYOTA, ES-250-ES-300-tC-CAMRY-CELICA-MR-2-SOLARA-RAV4 ACURA, INTEGRA HONDA, S-2000 FORD-MERCURY, MUSTANG, MUSTANG II, COBRA-CAPRI FORD LIGHT TRUCK, SUV & VAN, F-SERIES F-100 - F-550 MAZDA, RX DODGE LIGHT TRUCK, SUV & VAN, RAM 1500, 2500, 3500 BUICK-CHEV-DODGE-FORD-JEEP-OLDS-PLY, CARS FORD-MERCURY, MUSTANG, MUSTANG II,

F F E F NEW-C E F F NEW-D E F

8-5/8 in. Dia. Friction Disc 1-1/32"-24 Spline 8-3/8 in. Dia. Friction Disc 7/8"-20 Spline 9-1/4 in. Dia. Friction Disc 1-1/8"-21 Spline 8-5/8 in. Dia. Friction Disc 1"-24 Spline 8-3/8 in. Dia. Friction Disc 1-1/32"-24 Spline 10.4 in. Dia. Friction Disc 1-1/16"-10 Spline 13 in. Dia. Friction Disc 1-3/8"-10 Spline 9-1/4 in. Dia. Friction Disc 1"-23 Spline 12-1/4 in. Dia. Friction Disc 1-1/4"-10 Spline 11 in. Dia. Friction Disc 9 in. Dia. Friction Disc

11360010 11360033 11360049 11360056

97-05 65-87 77-97 32-92

COBRA-THUNDERBIRD-CAPRI-COUGAR CHEVROLET-PONTIAC, CAMARO, Z-28-CORVETTE-FIREBIRD, TRANS AM-GTO FORD, FAIRLANE-GALAXIE-MUSTANG, MUSTANG II, COBRA-TORINO-F-SERIES FORD-MERCURY, CARS, SUV, TRUCKS, & VANS CHEVROLET-FORD-PONTIAC, CAMARO, Z-28-CRATE

F NEW-E NEW-E F

11 in. Dia. Friction Disc 11 in. Dia. Friction Disc 11 in. Dia. Friction Disc 10.4 in. Dia. Friction Disc

11360075 11360679 11361000 11361020 11361739 11361830 11367500 11369010 11500100 11522018 11544020 11570841 11905018 11911808 11950600 23228035

99-04 05-10 89-93 93-97 63-83 81-01 11-11 97-10 86-92 81-04 86-09 06-09 87-07 00-07 93-96 83-88

ENGINES-FLATHEAD-FIREBIRD, TRANS AM FORD, MUSTANG, MUSTANG II, COBRA FORD, MUSTANG, MUSTANG II, COBRA CHEVROLET, 11" Dia. CHEVROLET-PONTIAC, CAMARO, Z-28-CRATE ENGINES-FIREBIRD, TRANS AM AMC-BUICK-CHEV-DODGE-FORD-OLDS-PLYM, CARS FORD-MERCURY, MUSTANG, MUSTANG II, COBRA-CAPRI FORD, MUSTANG, MUSTANG II, COBRA CHEVROLET-PONTIAC, CAMARO, Z-28-CORVETTE-FIREBIRD, TRANS AM-GTO TOYOTA, SUPRA LEXUS-TOYOTA, CARS, SUV, TRUCKS, & VANS MAZDA, RX-PICK UPS FORD, MUSTANG, MUSTANG II, COBRA LEXUS-SCION-TOYOTA, ES-250-ES-300-tC-CAMRY-CELICA-MR-2-SOLARA-RAV4 HONDA, S-2000 MAZDA, RX FORD-MERCURY, MUSTANG, MUSTANG II,

F F F F F F NEW-D NEW-D NEW-C NEW-F F F F NEW-E F F

11 in. Dia. Friction Disc 11 in. Dia. Friction Disc 11 in. Dia. Friction Disc 11 in. Dia. Friction Disc 10.4 in. Dia. Friction Disc 10.4 in. Dia. Friction Disc 11 in. Dia. Friction Disc 12 in. Dia. Friction Disc 9-1/4 in. Dia. Friction Disc 9-1/4 in. Dia. Friction Disc 9-1/4 in. Dia. Friction Disc 11 in. Dia. Friction Disc 9-1/4 in. Dia. Friction Disc 8-3/8 in. Dia. Friction Disc 9-1/4 in. Dia. Friction Disc 9 in. Dia. Friction Disc 1-1/16"-10 Spline

23280023 23281226 23381021 23381039

11-11 66-10 65-01 93-97

COBRA-THUNDERBIRD-CAPRI-COUGAR FORD, MUSTANG, MUSTANG II, COBRA FORD-MERCURY, CARS, TRUCKS, & VANS FORD-MERCURY, MUSTANG, MUSTANG II, COBRA-CAPRI CHEVROLET-PONTIAC, CAMARO, Z-28-CORVETTE-CRATE ENGINES-FIREBIRD,

NEW-D E E E

11 in. Dia. Friction Disc 1"-23 Spline 11 in. Dia. Friction Disc 1-1/16"-10 Spline 10.4 in. Dia. Friction Disc 1-1/16"-10 Spline 11 in. Dia. Friction Disc 1-1/8-26 Spline

23382612 23383271 23383735 23384070 23384071

97-10 63-82 63-84 68-74 63-69

TRANS AM CHEVROLET-PONTIAC, CAMARO, Z-28-CORVETTE-FIREBIRD, TRANS AM-GTO AMC-BUICK-CHEVROLET-GMC-OLDS-PONTIA, CARS BUICK-CHEVROLET-GMC-JEEP-OLDS-PONTI, CARS DODGE-PLYMOUTH, CARS DODGE, DART, DIPLOMAT, DEMON, GTS, SUPER BEE, ASPEN, CHALLENGER,

NEW-D F E NEW-D NEW-E

12 in. Dia. Friction Disc 1-1/8"-26 Spline 10.4 in. Dia. Friction Disc 1-1/8"-10 Spline 11 in. Dia. Friction Disc 1-1/8"-10 Spline 11 in. Dia. Friction Disc 1"-23 Spline 11 in. Dia. Friction Disc 1-3/16"-18 Spline

23384148 23384161 23384611 23388144 23500100 23536010 23544020

71-05 32-92 65-01 65-10 81-07 86-05 86-09

CH BUICK-CHEVROLET-GMC-OLDSMOBILE-PONT, CARS BUICK-CHEVROLET-FORD-OLDSMOBILE-PON, CARS & CRATE ENGINES FORD, MUSTANG, MUSTANG II, COBRA FORD, FAIRLANE-GALAXIE-MUSTANG, MUSTANG II, COBRA-TORINO-F-SERIES LEXUS-SCION-TOYOTA, CARS, SUV, & TRUCKS CHRYSLER-DODGE-EAGLE-MITSUBISHI-PLY, CARS DODGE-MAZDA-MITSUBISHI-PLYMOUTH, CONQUEST-626-MX-6-RX-PICK

E F E E F F F

11 in. Dia. Friction Disc 1-1/8"-26 Spline 10.4 in. Dia. Friction Disc 1-1/8"-26 Spline 10.4 in. Dia. Friction Disc 1-1/8"-26 Spline 11 in. Dia. Friction Disc 1-1/8"-26 Spline 9-1/4 in. Dia. Friction Disc 1-1/8"-21 Spline 8-7/8 in. Dia. Friction Disc 7/8-20 Spline 9-1/4 in. Dia. Friction Disc 1"-23 Spline

23902802 23909807 23911808 23950600

90-05 90-91 00-07 93-96

UPS-STARION-CONQUEST HONDA, CIVIC-CRX-DEL SOL ACURA, INTEGRA HONDA, S-2000 MAZDA, RX

F F NEW-E F

8-3/8 in. Dia. Friction Disc 7/8"-20 Spline 8-5/8 in. Dia. Friction Disc 1"-24 Spline 8-3/8 in. Dia. Friction Disc 1-1/32"-24 Spline 9-1/4 in. Dia. Friction Disc 1"-23 Spline

STEP 0.067

STEP .018 STEP 0.018

STEP 0.067

STEP 0.067

NOTE: THE APPLICATION INFORMATION LISTED ABOVE IS GENERIC, PLEASE REFFER TO THE APPLICATION SECTION OF THE CATALOG FOR SPECIFIC APPLICATIONS.

POPULARITY RANK EXPLANATION A = FAST MOVER - B = GOOD MOVER - C = FAIR MOVER - D = MODERATE MOVER - E = SLOW ITEM ITEMS LISTED WITH A POPULARITY CODE OF "F" ARE CUSTOM ORDERS THAT CANNOT BE RETURNED THROUGH STOCK ADJUSTMENT

(928) 771-8422 (Voice)

175

(928) 771-8322

(Fax)


PART #

POPULARITY AND INFORMATION LISTING BY ITEM

YEAR APPLICATION

CODE

APPLICATION DIMENSIONS

FW STEP

LIGHT METAL SERIES CLUTCHES LM017010 LM021057 LM070552 LM071800

97-05 81-01 66-87 63-69

CHEVROLET-PONTIAC, CAMARO, Z-28-CORVETTE-FIREBIRD, TRANS AM-GTO FORD-MERCURY, MUSTANG, MUSTANG II, COBRA-CAPRI DODGE-PLYMOUTH, CARS, SUV, & TRUCKS DODGE, DART, DIPLOMAT, DEMON, GTS, SUPER BEE, ASPEN, CHALLENGER,

E E F F

11 in. Dia. Friction Disc 1-1/8"-26 Spline 10.4 in. Dia. Friction Disc 1-1/16"-10 Spline 11 in. Dia. Friction Disc 1"-23 Spline 11 in. Dia. Friction Disc 1-3/16"-18 Spline

LM148075 LM148552 LM148679 LM161057 LM161675 LM165552 LM226552 LM269675 LM271675 LM281226 LM360010 LM360048 LM360075 LM360679 LM361675 LM381021 LM383269 LM383271 LM383735 LM384070 LM384071

99-04 71-83 05-10 86-01 71-88 63-87 77-80 60-87 63-82 77-10 97-05 81-01 99-04 05-10 60-88 65-01 60-87 63-82 63-84 66-87 63-69

CH FORD, MUSTANG, MUSTANG II, COBRA BUICK-CHEVROLET-GMC-OLDSMOBILE-PONT, CARS FORD, MUSTANG, MUSTANG II, COBRA FORD, MUSTANG, MUSTANG II, COBRA BUICK-CHEVROLET-OLDSMOBILE-PONTIAC, CARS & CRATE ENGINES BUICK-CHEV-DODGE-FORD-JEEP-OLDS-PLY, CARS FORD LIGHT TRUCK, SUV & VAN, BRONCO-F-SERIES F-100 - F-550 DODGE-PLYMOUTH, CARS, SUV, & TRUCKS AMC-BUICK-CHEVROLET-GMC-OLDS-PONTIA, CARS FORD, MUSTANG, MUSTANG II, COBRA-BRONCO-F-SERIES F-100 - F-550 CHEVROLET-PONTIAC, CAMARO, Z-28-CORVETTE-FIREBIRD, TRANS AM-GTO FORD-MERCURY, MUSTANG, MUSTANG II, COBRA-CAPRI FORD, MUSTANG, MUSTANG II, COBRA FORD, MUSTANG, MUSTANG II, COBRA AMC-BUICK-CHEV-DODGE-FORD-OLDS-PLYM, CARS FORD-MERCURY, MUSTANG, MUSTANG II, COBRA-CAPRI DODGE-PLYMOUTH, CARS, SUV, & TRUCKS AMC-BUICK-CHEVROLET-GMC-OLDS-PONTIA, CARS BUICK-CHEVROLET-GMC-JEEP-OLDS-PONTI, CARS DODGE-PLYMOUTH, CARS, SUV, & TRUCKS DODGE, DART, DIPLOMAT, DEMON, GTS, SUPER BEE, ASPEN, CHALLENGER,

F E F E E F F F F E F F F F F E F E E F F

11 in. Dia. Friction Disc 1-1/8"-26 Spline 11 in. Dia. Friction Disc 1-1/8"-26 Spline 11 in. Dia. Friction Disc 1-1/8"-26 Spline 10.4 in. Dia. Friction Disc 1-1/8"-26 Spline 10.4 in. Dia. Friction Disc 1-1/8"-26 Spline 11 in. Dia. Friction Disc 11 in. Dia. Friction Disc 1-1/16"-10 Spline 10.4 in. Dia. Friction Disc 1"-23 Spline 10.4 in. Dia. Friction Disc 1-1/8"-10 Spline 11 in. Dia. Friction Disc 1-1/16"-10 Spline 11 in. Dia. Friction Disc 10.4 in. Dia. Friction Disc 11 in. Dia. Friction Disc 11 in. Dia. Friction Disc 10.4 in. Dia. Friction Disc 10.4 in. Dia. Friction Disc 1-1/16"-10 Spline 10.4 in. Dia. Friction Disc 1"-23 Spline 10.4 in. Dia. Friction Disc 1-1/8"-10 Spline 11 in. Dia. Friction Disc 1-1/8"-10 Spline 11 in. Dia. Friction Disc 1"-23 Spline 11 in. Dia. Friction Disc 1-3/16"-18 Spline

LM384148 LM384161 LM384611 LM388144 LM570063 LM570841 LM611679 LM735552 LM800075

71-05 71-88 65-01 99-10 06-09 06-09 05-10 63-84 99-04

CH BUICK-CHEVROLET-GMC-OLDSMOBILE-PONT, CARS BUICK-CHEVROLET-OLDSMOBILE-PONTIAC, CARS & CRATE ENGINES FORD, MUSTANG, MUSTANG II, COBRA FORD, MUSTANG, MUSTANG II, COBRA FORD, MUSTANG, MUSTANG II, COBRA FORD, MUSTANG, MUSTANG II, COBRA FORD, MUSTANG, MUSTANG II, COBRA BUICK-CHEVROLET-GMC-JEEP-OLDS-PONTI, CARS FORD, MUSTANG, MUSTANG II, COBRA

D E E E F E F F E

11 in. Dia. Friction Disc 1-1/8"-26 Spline 10.4 in. Dia. Friction Disc 1-1/8"-26 Spline 10.4 in. Dia. Friction Disc 1-1/8"-26 Spline 11 in. Dia. Friction Disc 1-1/8"-26 Spline 11 in. Dia. Friction Disc 11 in. Dia. Friction Disc 1-1/8"-26 Spline 11 in. Dia. Friction Disc 1-1/16"-10 Spline 11 in. Dia. Friction Disc 1-1/8"-10 Spline 11 in. Dia. Friction Disc 1-1/16"-10 Spline

04114805 04114810 04214805 04214810 04234805 04614800 04614842 04714800

96-10 96-10 96-04 96-04 11-11 55-85 97-11 55-85

FORD, 10.5" Dia 1-1/8"-26 Spline Twin Disc 8-Bolt Flywheel FORD, 10.5" Dia 1-1/8"-26 Spline Twin Disc 6-Bolt Flywheel FORD, MUSTANG, MUSTANG II, COBRA FORD, MUSTANG, MUSTANG II, COBRA FORD, MUSTANG, MUSTANG II, COBRA CHEVROLET-GMC-GMC LIGHT TRUCK, SUV, CARS, SUV, & TRUCKS CHEVROLET-PONTIAC, CAMARO, Z-28-CORVETTE-FIREBIRD, TRANS AM-GTO CHEVROLET-GMC-GMC LIGHT TRUCK, SUV, CARS, SUV, & TRUCKS

400147 400469 400472 700010

01-06 91-04 87-90 75-79

DODGE LIGHT TRUCK, SUV & VAN, RAM 1500, 2500, 3500 JEEP, SUV, & TRUCKS JEEP, SUV, & TRUCKS BUICK-OLDSMOBILE, CENTURY, CUTLASS, OMEGA, REGAL, SKYLARK, &

E B D E

61.5 lbs., 152 Tooth, 15.625"" Ring OD, fits 23 clutch patterns 27.5 lbs., 164 Tooth, 13.8"" Ring OD, fits 2 clutch patterns 27.5 lbs., 164 Tooth, 13.8"" Ring OD, fits 2 clutch patterns 29.0 lbs., 160 Tooth, 13.420"" Ring OD, fits 2 clutch patterns

700030 700100 700102 700105 700107 700120 700140

67-73 55-85 55-85 70-90

SOMMERSET BUICK, CENTURY, REGAL, GS, SPECIAL, LaSABRE, ELECTRA, CENTURION, SK CHEVROLET-GMC, CARS CHEVROLET, CHEVROLET CORVETTE, CHEVROLET CAMARO, CHEVROLET-GMC-GMC LIGHT TRUCK, SUV, CARS, SUV, & TRUCKS CHEVROLET-GMC-GMC LIGHT TRUCK, SUV, CARS, TRUCKS, & SUVS

F B B F B A C

35.2 lbs., 166 Tooth, 13.979"" Ring OD, fits 2,3 clutch patterns 30.2 lbs., 153 Tooth, 12.835"" Ring OD, fits 2 clutch patterns 29.9 lbs., 153 Tooth, 12.835" Ring OD, fits 2 clutch patterns 27.0 lbs., 153 Tooth, 12.835" Ring OD, fits 24 clutch patterns 29.3 lbs., 153 Tooth, 12.835" Ring OD, fits 24 clutch patterns 36.3 lbs., 168 Tooth, 14.096"" Ring OD, fits 3 clutch patterns 35.9 lbs., 168 Tooth, 14.096"" Ring OD, fits 3 clutch patterns

DYAD DS (MULTI DISC CLUTCHES) NEW-B NEW-D NEW-C NEW-D NEW-C NEW-C NEW-B NEW-D

10.5" Dia 1-1/8"-26 Spline Twin Disc 8-Bolt Flywheel 10.5" Dia 1-1/8"-26 Spline Twin Disc 6-Bolt Flywheel Two 10.5 in. Dia. Friction Discs 1-1/16"-10 Spline Two 10.5 in. Dia. Friction Discs 1-1/16"-10 Spline Two 10.5 in. Dia. Friction Discs 1"-23 Spline Two 10.5 in. Dia. Friction Discs 1-1/8"-26 Spline Two 10.5 in. Dia. Friction Discs 1-1/8"-26 Spline Two 10.5 in. Dia. Friction Discs 1-1/8"-10 Spline

CENTERFORCE FLYWHEELS

NOTE: THE APPLICATION INFORMATION LISTED ABOVE IS GENERIC, PLEASE REFFER TO THE APPLICATION SECTION OF THE CATALOG FOR SPECIFIC APPLICATIONS.

POPULARITY RANK EXPLANATION A = FAST MOVER - B = GOOD MOVER - C = FAIR MOVER - D = MODERATE MOVER - E = SLOW ITEM ITEMS LISTED WITH A POPULARITY CODE OF "F" ARE CUSTOM ORDERS THAT CANNOT BE RETURNED THROUGH STOCK ADJUSTMENT

(928) 771-8422 (Voice)

176

(928) 771-8322

(Fax)


PART #

POPULARITY AND INFORMATION LISTING BY ITEM

YEAR APPLICATION

CODE

APPLICATION DIMENSIONS

FW STEP

CENTERFORCE FLYWHEELS 700142 700144 700145

97-11 CHEVROLET-GMC -PONTIAC, CARS, TRUCKS, & SUVS CHEVROLET - CRATE ENGINES, 6.2L LSA & 7.4L LSX Engines, 8 Bolt Crank 91-95 CHEVROLET & GMC LIGHT TRUCK, SUV &, C, G, K, P, R, V, 10-30 SERIES, FULL

A NEW-B F

29.7 lbs., 168 Tooth, 14.096"" Ring OD, fits 14 clutch patterns 29.55 lbs., 168 Tooth, 14.096"" Ring OD, fits 14 clutch patterns 36.3 lbs., 168 Tooth, 14.096"" Ring OD, fits 3 clutch patterns

700146

SIZE BLAZER, SUBURBAN, 96-00 CHEVROLET & GMC LIGHT TRUCK, SUV &, C, G, K, P, R, V, 10-30 SERIES, FULL

NEW-D

36.3 lbs., 168 Tooth, 14.096"" Ring OD, fits 3 clutch patterns

700148 700160 700161

SIZE BLAZER, SUBURBAN, CHEVROLET, 85-04 CHEVROLET & GMC LIGHT TRUCK, SUV &, SUV, TRUCKS, & VANS 96-00 CHEVROLET & GMC LIGHT TRUCK, SUV &, C, G, K, P, R, V, 10-30 SERIES, FULL

C B NEW-D

36.3 lbs., 168 Tooth, 14.096" Ring OD, fits 2,3 clutch patterns 35.7 lbs., 168 Tooth, 14.096"" Ring OD, fits 3 clutch patterns 35.7 lbs., 168 Tooth, 14.096"" Ring OD, fits 3 clutch patterns

700162 700170 700173 700174 700175 700177 700180 700200 700205 700210

86-00 84-92 89-96 93-97 70-78 96-04 96-04 96-10

SIZE BLAZER, SUBURBAN, CHEVROLET, SPECIAL APPLICATION ZERO BALANCE FLYWHEEL CHEVROLET-PONTIAC, CAMARO, Z-28-CORVETTE-FIREBIRD, TRANS AM CHEVROLET CAMARO, CHEVROLET CORVETTE, CHEVROLET, CORVETTE CHEVROLET-PONTIAC, CAMARO, Z-28-FIREBIRD, TRANS AM CHEVROLET-GMC-GMC LIGHT TRUCK, SUV, CARS, TRUCKS, & SUVS FORD, MUSTANG, MUSTANG II, COBRA FORD, MUSTANG, MUSTANG II, COBRA FORD, MUSTANG, MUSTANG II, COBRA

E B C F C E D C B C

35.7 lbs., 168 Tooth, 14.096" Ring OD, fits 2,3 clutch patterns 31.0 lbs., 153 Tooth, 12.835"" Ring OD, fits 2 clutch patterns 29.0 lbs., 153 Tooth, 12.835" Ring OD, fits 24 clutch patterns 27.0 lbs., 153 Tooth, 12.835" Ring OD, fits 24 clutch patterns 27.5 lbs., -153 Tooth, 12.835"" Ring OD, fits 24 clutch patterns 29.0 lbs., 153 Tooth, 12.835"" Ring OD, fits 24 clutch patterns 36.1 lbs., 168 Tooth, 14.096"" Ring OD, fits 3 clutch patterns 26.7 lbs., 164 Tooth, 14.215"" Ring OD, fits 18 clutch patterns 26.6 lbs., 164 Tooth, 14.215"" Ring OD, fits 18 clutch patterns 28.2 lbs., 164 Tooth, 14.215"" Ring OD, fits 7,18 clutch

700215 700220

05-11 FORD, MUSTANG, MUSTANG II, COBRA 63-80 FORD, FAIRLANE-FALCON-GALAXIE-GRANADA, LTD-MUSTANG, MUSTANG II,

B B

patterns 28.2 lbs., 164 Tooth, 14.215"" Ring OD, fits 18 clutch patterns 23.3 lbs., 157 Tooth, 13.294"" Ring OD, fits 4 clutch patterns

700221 700225 700230 700240 700242

65-73 63-94 80-97

CO FORD MUSTANG, FORD, MUSTANG, MUSTANG II, COBRA FORD, FORD, CARS, SUV, TRUCKS, & VANS FORD LIGHT TRUCK, SUV & VAN, BRONCO-E-SERIES 100 - 350 & ECONOLINE

B C D C E

23.3 lbs., 157 Tooth, 13.294" Ring OD, fits 7 clutch patterns 23.1 lbs., 157 Tooth, 13.294"" Ring OD, fits 2 clutch patterns 34.7 lbs., 164 Tooth, 14.215" Ring OD, fits 4,5,8 clutch patterns 34.2 lbs., 164 Tooth, 14.215"" Ring OD, fits 5 clutch patterns 34.1 lbs., 164 Tooth, 14.215"" Ring OD, fits 5 clutch patterns

700250-48 700260 700270 700280 700290

69-71 63-74 65-71 65-76 77-82

VAN-F-SERIES F-100 - F FORD, PANTERA FORD, CARS, & TRUCKS FORD, FAIRLANE-GALAXIE-MUSTANG, MUSTANG II, COBRA FORD, FAIRLANE-GALAXIE-MUSTANG, MUSTANG II, COBRA-TORINO-F-SERIES FORD LIGHT TRUCK, SUV & VAN, BRONCO-E-SERIES 100 - 350 & ECONOLINE

C B C B D

34.3 lbs., 164 Tooth, 14.215"" Ring OD, fits 16 clutch patterns 29.5 lbs., 184 Tooth, 15.520"" Ring OD, fits 6 clutch patterns 29.0 lbs., 184 Tooth, 15.503"" Ring OD, fits 5 clutch patterns 40.5 lbs., 176 Tooth, 15.520"" Ring OD, fits 6 clutch patterns 37.0 lbs., 176 Tooth, 15.520"" Ring OD, fits 8 clutch patterns

700310 700320 700330 700340 700400 700410 700420 700440 700450 700460 700470 700500

71-83 81-95 83-87 32-48 64-92 58-92 63-72 71-91 71-78 68-73

VAN-F-SERIES F-100 - F FORD-MERCURY, PINTO-BOBCAT-COUGAR FORD, MUSTANG, MUSTANG II, COBRA FORD LIGHT TRUCK, SUV & VAN, F-SERIES F-100 - F-550 FORD, FLATHEAD DODGE-PLYMOUTH, CARS, SUV, & TRUCKS CHRYSLER, DODGE-PLYMOUTH, CARS, SUV, & TRUCKS DODGE-PLYMOUTH, CARS DODGE-PLYMOUTH, CARS, SUV, & TRUCKS DODGE-PLYMOUTH, CARS Chrysler Steel Flywheel, OLDSMOBILE, CUTLASS-TO 1977, DELTA 88, OMEGA-TO 1977, STARFIRE-TO

F B E F B F C C F F F D

22.0 lbs., 135 Tooth, 11.293"" Ring OD, fits 1 clutch patterns 27.6 lbs., 157 Tooth, 13.294"" Ring OD, fits 7 clutch patterns 40.4 lbs., 176 Tooth, 15.520"" Ring OD, fits 6 clutch patterns 32.2 lbs., 112 Tooth, 14.162"" Ring OD, fits 2,4 clutch patterns 29.3 lbs., 130 Tooth, 13.195"" Ring OD, fits 2 clutch patterns 37.8 lbs., 130 Tooth, 13.195" Ring OD, fits 2 clutch patterns 36.3 lbs., 143 Tooth, 14.568"" Ring OD, fits 2 clutch patterns 36.2 lbs., 143 Tooth, 14.568"" Ring OD, fits 2 clutch patterns 36.1 lbs., 143 Tooth, 14.568"" Ring OD, fits 3 clutch patterns 28.8 lbs., 130 Tooth, 13.195"" Ring OD, fits 2 clutch patterns 30.0 lbs., 130 Tooth, 13.195" Ring OD, fits 2 clutch patterns 30.6 lbs., 166 Tooth, 13.979"" Ring OD, fits 3 clutch patterns

700501 700502 700510

1977, 84-88 PONTIAC, FIERO 84-88 PONTIAC, FIERO 65-67 OLDSMOBILE, CUTLASS-TO 1977, DELTA 88, OMEGA-TO 1977, STARFIRE-TO

F F F

28.4 lbs., 153 Tooth, 12.835" Ring OD, fits clutch patterns 28.2 lbs., 153 Tooth, 12.835" Ring OD, fits clutch patterns 31.3 lbs., 166 Tooth, 13.979"" Ring OD, fits 3 clutch patterns

700600 700610 700710 700720 700730

63-79 77-85 -

B D F E E

30.6 lbs., 166 Tooth, 13.979"" Ring OD, fits 2,3 clutch patterns 30.1 lbs., 166 Tooth, 13.979"" Ring OD, fits 2 clutch patterns 35.0 lbs., 164 Tooth, 13.830" Ring OD, fits 2,3 clutch patterns 35.0 lbs., 164 Tooth, 13.830" Ring OD, fits 2,3 clutch patterns 35.0 lbs., 164 Tooth, 13.830" Ring OD, fits 2,3 clutch patterns

1977, PONTIAC, CARS PONTIAC, CARS , , ,

NOTE: THE APPLICATION INFORMATION LISTED ABOVE IS GENERIC, PLEASE REFFER TO THE APPLICATION SECTION OF THE CATALOG FOR SPECIFIC APPLICATIONS.

POPULARITY RANK EXPLANATION A = FAST MOVER - B = GOOD MOVER - C = FAIR MOVER - D = MODERATE MOVER - E = SLOW ITEM ITEMS LISTED WITH A POPULARITY CODE OF "F" ARE CUSTOM ORDERS THAT CANNOT BE RETURNED THROUGH STOCK ADJUSTMENT

(928) 771-8422 (Voice)

177

(928) 771-8322

(Fax)


PART #

POPULARITY AND INFORMATION LISTING BY ITEM

YEAR APPLICATION

CODE

APPLICATION DIMENSIONS

FW STEP

CENTERFORCE FLYWHEELS 700830

77-96 TOYOTA, CELICA-CORONA-PICK UPS & 4RUNNER (ALSO SEE: TACOMA, T-100,

E

29.3 lbs., 115 Tooth, 11.625"" Ring OD, fits 25 clutch patterns

700832

T 87-96 TOYOTA LIGHT TRUCKS, SUV & VAN, PICK UPS & 4RUNNER (ALSO SEE:

E

34.6 lbs., 120 Tooth, 12.000"" Ring OD, fits 12 clutch patterns

700836

TACOMA, T-100, TUNDRA)-TACOMA, 93-02 TOYOTA LIGHT TRUCKS, SUV & VAN, PICK UPS & 4RUNNER (ALSO SEE:

F

30.9 lbs., 115 Tooth, 11.625"" Ring OD, fits 20 clutch patterns

700838 700900 700901 700905 700908 700920 900100 900120 900140 900142 900143 900170 900205 900210

05-07 92-01 00-07 90-00 90-03 03-06 55-85 55-85 70-90 97-11 04-07 84-92 96-04 96-10

TACOMA, T-100, TUNDRA)-TACOMA, SCION, tC ACURA-HONDA, INTEGRA-CR-V-DEL SOL HONDA, S-2000 HONDA, CIVIC-CRX-DEL SOL ACURA-HONDA, CL-ACCORD-PRELUDE MITSUBISHI, LANCER CHEVROLET-GMC, CARS CHEVROLET-GMC-GMC LIGHT TRUCK, SUV, CARS, SUV, & TRUCKS CHEVROLET-GMC, CARS, TRUCKS, & SUVS CHEVROLET-GMC -PONTIAC, CARS, TRUCKS, & SUVS CADILLAC-CHEVROLET, CTS-V-CORVETTE-SSR CHEVROLET-PONTIAC, CAMARO, Z-28-CORVETTE-FIREBIRD, TRANS AM FORD, MUSTANG, MUSTANG II, COBRA FORD, MUSTANG, MUSTANG II, COBRA

F F NEW-C F F F E F F D F F D F

16.5 lbs., 120 Tooth, 12.000" Ring OD, fits clutch patterns 13.8 lbs., 112 Tooth, 11.330"" Ring OD, fits 13 clutch patterns - lbs., - Tooth, -" Ring OD, fits - clutch patterns 13.1 lbs., 109 Tooth, 11.086"" Ring OD, fits 15 clutch patterns 14.9 lbs., 119 Tooth, 12.020"" Ring OD, fits 20 clutch patterns 16.5 lbs., 114 Tooth, 11.535" Ring OD, fits clutch patterns 16.0 lbs., 153 Tooth, 12.835"" Ring OD, fits 2 clutch patterns 15.6 lbs., 168 Tooth, 14.096"" Ring OD, fits 3 clutch patterns 16.0 lbs., 168 Tooth, 14.096"" Ring OD, fits 3 clutch patterns 13.1 lbs., 168 Tooth, 14.096"" Ring OD, fits 14 clutch patterns 20.2 lbs., 168 Tooth, 14.096"" Ring OD, fits 14 clutch patterns 13.6 lbs., 153 Tooth, 12.835"" Ring OD, fits 2 clutch patterns 12.7 lbs., 164 Tooth, 14.215"" Ring OD, fits 18 clutch patterns 13.5 lbs., 164 Tooth, 14.215"" Ring OD, fits 7,18 clutch

900215 900220

05-11 FORD, MUSTANG, MUSTANG II, COBRA 63-80 FORD, FAIRLANE-FALCON-GALAXIE-GRANADA, LTD-MUSTANG, MUSTANG II,

E E

patterns 13.5 lbs., 164 Tooth, 14.215"" Ring OD, fits 18 clutch patterns 11.5 lbs., 157 Tooth, 13.294"" Ring OD, fits 4 clutch patterns

900230 900232 900240 900242

65-73 63-94 80-97

CO , FORD, MUSTANG, MUSTANG II, COBRA FORD, CARS, SUV, TRUCKS, & VANS FORD LIGHT TRUCK, SUV & VAN, BRONCO-E-SERIES 100 - 350 & ECONOLINE

F E F F

13.7 lbs., 164 Tooth, 14.215" Ring OD, fits 4,5,8 clutch patterns 12.0 lbs., 157 Tooth, 13.294"" Ring OD, fits 2 clutch patterns 15.0 lbs., 164 Tooth, 14.215"" Ring OD, fits 5 clutch patterns 15.1 lbs., 164 Tooth, 14.215"" Ring OD, fits 5 clutch patterns

900250-48 900260 900270 900320 900400 900561

69-71 63-74 65-71 81-95 64-92 62-85

VAN-F-SERIES F-100 - F FORD, PANTERA FORD, CARS, & TRUCKS FORD, FAIRLANE-GALAXIE-MUSTANG, MUSTANG II, COBRA FORD, MUSTANG, MUSTANG II, COBRA DODGE-PLYMOUTH, CARS, SUV, & TRUCKS CHEVROLET-GMC LIGHT TRUCK, SUV & VA, CARS, SUV, & TRUCKS

F F F E F F

14.7 lbs., 164 Tooth, 14.215"" Ring OD, fits 16 clutch patterns 17.3 lbs., 184 Tooth, 15.520"" Ring OD, fits 6 clutch patterns 17.5 lbs., 184 Tooth, 15.503"" Ring OD, fits 5 clutch patterns 15.0 lbs., 157 Tooth, 13.294"" Ring OD, fits 7 clutch patterns 12.2 lbs., 130 Tooth, 13.195"" Ring OD, fits 2 clutch patterns 15.8 lbs., 168 Tooth, 14.096"" Ring OD, fits 3 clutch patterns

STEP 0.067

THROWOUT BEARINGS 005

71-80 TOYOTA, CELICA-CORONA-PICK UPS & 4RUNNER (ALSO SEE: TACOMA, T-100,

F

010

T 70-95 CHEV-DODGE-ISUZU-MITSU-PLYM-MITSU-T,

016 046 091 100 1172 134 1602 201 210 370 371 4166

73-99 74-87 77-02 92-05 75-99 96-08 69-74 77-88 79-05 82-89 84-99 94-05

LUV-CHALLENGER-COLT-AMIGO-PICK UPS-TROOPER-ARROW-SAPPORO-COR NISSAN-DATSUN, CARS, SUV, TRUCKS, & VANS TOYOTA LIGHT TRUCKS, SUV & VAN, LAND CRUISER FORD-MAZDA-MERCURY, CARS AUDI-VOLKSWAGEN, CARS BMW, 316-318-320i-325-328-524-525i-528-M3-M5-M6-M635-Z3 HYUNDAI-KIA, ELANTRA-SANTA FE-SONATA-TIBURON-OPTIMA NISSAN-DATSUN, 240-260 TOYOTA, CARS, SUV, TRUCKS, & VANS CHRYSLER-DODGE-EAGLE-HYUNDAI-MITSU-, CARS ACURA-HONDA, INTEGRA-ACCORD-CRX-PRELUDE TOYOTA, CELICA-COROLLA-MR-2-PASEO-TERCEL CHRYSLER-DODGE-EAGLE-MITSUBISHI-PLY,

4173 419 427 440

03-05 86-92 88-91 88-01

CIRRUS-SEBRING-AVENGER-NEON-STRATUS-TALON-ECLIPSE, ECLIPSE S DODGE, NEON TOYOTA, SUPRA HONDA, CIVIC-CRX DODGE-MITSUBISHI-LIGHT TRUCK, SUV &, D-50 & RAM 50

E

11 Dia. Friction Disc 1-3/16-18 Spline

D E E F E E E D D F F NEW-E

11 Dia. Friction Disc 1-1/16"-10 Spline

NEW-D E E F

PICK-UPS-RAIDER-MONTERO, MONTERO SPORT-PICK UP

NOTE: THE APPLICATION INFORMATION LISTED ABOVE IS GENERIC, PLEASE REFFER TO THE APPLICATION SECTION OF THE CATALOG FOR SPECIFIC APPLICATIONS.

POPULARITY RANK EXPLANATION A = FAST MOVER - B = GOOD MOVER - C = FAIR MOVER - D = MODERATE MOVER - E = SLOW ITEM ITEMS LISTED WITH A POPULARITY CODE OF "F" ARE CUSTOM ORDERS THAT CANNOT BE RETURNED THROUGH STOCK ADJUSTMENT

(928) 771-8422 (Voice)

178

(928) 771-8322

(Fax)


PART #

POPULARITY AND INFORMATION LISTING BY ITEM

YEAR APPLICATION

CODE

APPLICATION DIMENSIONS

FW STEP

THROWOUT BEARINGS 442 444 446 452 453 550 580 590

90-01 88-09 87-06 89-92 91-01 77-96 86-02 87-96

TOYOTA, CAMRY-CELICA-COROLLA-MR-2-SOLARA LEXUS-TOYOTA LIGHT TRUCKS, SUV & VA, CARS, SUV, TRUCKS, & VANS LEXUS-TOYOTA, ES-250-ES-300-CAMRY-CELICA-MR-2-SOLARA-RAV4 MAZDA, RX FORD-MAZDA-MERCURY, ESCORT & ZX 2-MX-3-PROTEGE-TOPAZ DODGE-MITSUBISHI-PLYMOUTH, CARS & TRUCKS GEO-SUZUKI, TRACKER-SAMURAI-SIDEKICK-VITARA-X-90 TOYOTA LIGHT TRUCKS, SUV & VAN, PICK UPS & 4RUNNER (ALSO SEE:

F E F F F F E C

591 592 809 812

89-04 90-00 86-01 87-03

TACOMA, T-100, TUNDRA)-TACOMA, NISSAN-DATSUN, 240-300-PICK UPS, FRONTIER-XTERRA DODGE-MITSUBISHI-MITSUBISHI, STEALTH-3000GT INFINITI-NISSAN-DATSUN, I-30-MAXIMA-AXXESS HONDA-ISUZU LIGHT TRUCK, SUV & VAN, PASSPORT-AMIGO-PICK

E F F E

813 817 820 837 840

89-05 87-03 92-05 90-93 89-09

UPS-RODEO-TROOPER MAZDA, MIATA, MX-5 ACURA-HONDA, CL-INTEGRA-LEGEND-ACCORD-CIVIC-CR-V-DEL SOL-PRELUDE HONDA, CIVIC-DEL SOL ACURA, INTEGRA GEO-PONTIAC-SCION-TOYOTA,

F E E F E

904 N1086 N1178 N1430 N1439 N1463 N1466 N1489 N1491 N1493 N1703 N1710 N1714 N1716 N1725 N1728 N1729 N1738 N1744 N1745 N1747 N1750

93-06 55-79 66-77 63-88 60-92 66-78 68-84 65-71 58-92 97-04 32-04 32-95 80-88 81-94 79-83 85-87 83-94 87-02 86-94 93-07

PRIZM-VIBE-xA,xB-CELICA-COROLLA-ECHO-MATRIX-MR-2-YARIS SUBARU, BAJA-FORESTER-IMPREZA-LEGACY-OUTBACK BUICK-CHEVROLET-GMC-OLDSMOBILE-PONT, CARS BUICK-JEEP-OLDSMOBILE, CARS, SUV, & TRUCKS SPECIAL TOB FOR ADVANCE ADAPTERS &, AMERICAN MOTORS-FORD-JEEP-MERCURY, CARS, SUV, TRUCKS, & VANS DODGE-PLYMOUTH, CARS, SUV, & TRUCKS GM INTERMEDIATE BRG, AMERICAN MOTORS-JEEP, CARS, SUV, & TRUCKS AMERICAN MOTORS-JEEP, CARS, SUV, & TRUCKS FORD, FAIRLANE-GALAXIE-MUSTANG, MUSTANG II, COBRA-TORINO DODGE-PLYMOUTH, CARS FORD-MAZDA-MERCURY, ESCORT & ZX 2-ESCAPE-TRIBUTE-TOPAZ FORD-MERCURY, CARS, SUV, TRUCKS, & VANS BUICK-CHEV-FORD-GMC-ISUZU-OLDS-PONT, CARS BUICK-CADILLAC-CHEVROLET-OLDS-PONTI, CARS CHRYSLER-DODGE-PLYMOUTH, CARS & MINI VANS AMERICAN MOTORS-JEEP, JEEP - SUV & TRUCK FORD LIGHT TRUCK, SUV & VAN, AEROSTAR-BRONCO II-RANGER BUICK-CADILLAC-CHEVROLET-OLDS-PONTI, CARS GEO-SUZUKI, METRO-SPRINT-ESTEEM-SWIFT BUICK-CHEVROLET-OLDSMOBILE-PONTIAC, CARS FORD-MAZDA LIGHT TRUCK, SUV & VAN-M,

F E E D A B E D D B D F A A F F F F F F E E

N1752 N1753 N1754 N1764 N1765 N1774 N1777 N3758 N4170 N8031

89-95 87-98 87-06 92-08 91-02 94-97 96-04 74-02 99-04 89-06

AEROSTAR-BRONCO-EXPLORER-F-SERIES F-100 - F-550-RANGER-PICK FORD, TAURUS FORD LIGHT TRUCK, SUV & VAN, F-SERIES F-100 - F-550 DODGE-FORD-MERCURY, CARS, SUV, TRUCKS, & VANS DODGE-ISUZU-JEEP, SUV, & TRUCKS SATURN, SATURN DODGE LIGHT TRUCK, SUV & VAN, RAM 1500, 2500, 3500 CHEVROLET-GMC -PONTIAC, CARS, SUV, TRUCKS, & VANS VOLKSWAGEN, CABRIO-GOLF-JETTA-RABBIT-SCIROCCO FORD LIGHT TRUCK, SUV & VAN, F-SERIES F-100 - F-550 AUDI-VOLKSWAGEN, TT-BEETLE-CORRADO-GOLF-JETTA-PASSAT

F E D A F E C F E F

NOTE: THE APPLICATION INFORMATION LISTED ABOVE IS GENERIC, PLEASE REFFER TO THE APPLICATION SECTION OF THE CATALOG FOR SPECIFIC APPLICATIONS.

POPULARITY RANK EXPLANATION A = FAST MOVER - B = GOOD MOVER - C = FAIR MOVER - D = MODERATE MOVER - E = SLOW ITEM ITEMS LISTED WITH A POPULARITY CODE OF "F" ARE CUSTOM ORDERS THAT CANNOT BE RETURNED THROUGH STOCK ADJUSTMENT

(928) 771-8422 (Voice)

179

(928) 771-8322

(Fax)


PART #

POPULARITY AND INFORMATION LISTING BY ITEM

YEAR APPLICATION

CODE

APPLICATION DIMENSIONS

FW STEP

ALIGNMENT TOOLS 50001 50002 50005 50011 50012

65-06 73-98 70-05 71-09 70-09

CHEV LT & SUV-INFINITI-NISSAN-DATSU, CARS, SUV, TRUCKS, & VANS NISSAN-DATSUN, 200SX-210-B-210 FORD-MAZDA-MERCURY, CARS & TRUCKS LEXUS-TOYOTA, CARS, SUV, TRUCKS, & VANS PONTIAC-SCION-TOYOTA,

E F E C E

1"-24 Spline 13/16"-18 Spline 15/16"-22 Spline 1-1/8"-21 Spline 15/16"-21 Spline

50020 50028 50047 50048 50058 50059 50069 50088 50090 50096

72-08 69-99 86-02 63-10 90-07 89-05 87-01 93-06 85-06

VIBE-xA,xB-CELICA-COROLLA-ECHO-MATRIX-MR-2-PASEO-TERCEL-YARI EAGLE-HYUN-KIA-MAZDA-MITSU-PLYM-POR, CARS BMW, 2000, 2002-316-318-320i-325-328-524-525i-528-M3-M5-M6-M635-Z GEO-SUZUKI, TRACKER-SAMURAI-SIDEKICK-VITARA-X-90 FORD-MERCURY, CARS, SUV, TRUCKS, & VANS HONDA, ACCORD-PASSPORT-PRELUDE-S-2000 HONDA, CIVIC-CRX-DEL SOL CHRYSLER 1-3/8"X10 SPLINE 0.750" NO, ACURA-HONDA, CL-INTEGRA-LEGEND-CIVIC-CR-V-DEL SOL SUBARU, BAJA-FORESTER-IMPREZA-LEGACY-OUTBACK VOLKSWAGEN,

E E E B E E E F F F

3/4"-20 Spline 1-1/8"-10 Spline 7/8"-20 Spline 1-1/8"-26 Spline 1-1/32"-24 Spline 7/8"-20 Spline Spline 1-1/32"-24 Spline 1"-24 Spline 7/8"-28 Spline

51009 51012 51018 51023 51075 52008 52010 52012 52075

71-07 94-97 63-72 60-91 92-06 71-09 63-10 89-96 87-07

BEETLE-CABRIO-CORRADO-GOLF-JETTA-PASSAT-RABBIT-SCIROCCO DODGE LIGHT TRUCK, SUV & VAN-JEEP, SUV, TRUCKS, & VANS DODGE LIGHT TRUCK, SUV & VAN, RAM 1500, 2500, 3500 DODGE-PLYMOUTH, CARS DODGE-PLYMOUTH, CARS, SUV, & TRUCKS DODGE, VIPER-RAM 1500, 2500, 3500 DODGE-FORD-MAZDA-MERC-MITSU-PLYM-PO, CARS, SUV, TRUCKS, & VANS FORD-JEEP-MERCURY, CARS, SUV, TRUCKS, & VANS FORD-MERCURY, ESCORT & ZX 2-TAURUS-TOPAZ FORD LIGHT TRUCK, SUV & VAN, E-SERIES 100 - 350 & ECONOLINE

NEW-D F E C NEW-E D A F E

1-1/8"-10 Spline 1-1/4"-10 Spline 1-3/16-18 Spline 1"-23 Spline 1-1/8"-26 Spline 1"-23 Spline 1-1/16"-10 Spline 7/8"-20 Spline 1-1/4"-10 Spline

52110 53001 53006 53010 53014 53026

65-04 91-02 82-02 55-07 80-99 71-11

VAN-F-SERIES F-100 - F-550 FORD, FAIRLANE-GALAXIE-MUSTANG, MUSTANG II, COBRA-TORINO-F-SERIES SATURN, SATURN AMC-CHEV-GMC-ISUZU-JEEP-PONTIAC, CARS, SUV, TRUCKS, & VANS AMC-BUICK-CHEV-GMC-JEEP-OLDS-PONTIA, CARS BUICK-CADILLAC-CHEVROLET-OLDS-PONTI, CARS BUICK-CADI-CHEV-GMC-ISUZU-OLDS-PONT, CARS

E F D A E A

1-3/8"-10 Spline 15/16"-22 Spline 1"-14 Spline 1-1/8"-10 Spline 1"-14 Spline 1-1/8"-26 Spline

41001 41002 41003 42001 43001 43002 43003

63-92 88-06 92-07 81-10 62-06 63-79 99-11

DODGE-PLYMOUTH, CARS DODGE LIGHT TRUCK, SUV & VAN, RAM 1500, 2500, 3500 DODGE, VIPER-DAKOTA-RAM 1500, 2500, 3500 FORD-MERCURY, MUSTANG, MUSTANG II, COBRA-CAPRI BUICK-CHEVROLET-GMC-OLDSMOBILE-PONT, CARS OLDSMOBILE-PONTIAC, CARS CADI-CHEVY-GMC LIGHT TRUCK, SUV & V, CARS, TRUCKS, & SUVS

PILOT BEARINGS NEW-C NEW-C NEW-B NEW-A NEW-A NEW-B NEW-C

NOTE: THE APPLICATION INFORMATION LISTED ABOVE IS GENERIC, PLEASE REFFER TO THE APPLICATION SECTION OF THE CATALOG FOR SPECIFIC APPLICATIONS.

POPULARITY RANK EXPLANATION A = FAST MOVER - B = GOOD MOVER - C = FAIR MOVER - D = MODERATE MOVER - E = SLOW ITEM ITEMS LISTED WITH A POPULARITY CODE OF "F" ARE CUSTOM ORDERS THAT CANNOT BE RETURNED THROUGH STOCK ADJUSTMENT

(928) 771-8422 (Voice)

180

(928) 771-8322

(Fax)


Centerforce  

Centerforce Clutch

Read more
Read more
Similar to
Popular now
Just for you