Tool Works Issue #61

THE NEXT GENERATION SPRAY GUN PG. 13.14

REFLECT PERFECTION PG. 13.14

FEATURED PRODUCTS PG. 1.3 COMPARISON OF SANITIZERS PG. 4.5 SAFETY FIRST PRODUCTS PG. 6.7 CYCLE TIME: THE MOST IMPORTANT KPI PG. 30

PAGE 1

Waterborne or solvent paints mixed automatically to perfection - Designed for stirring up small volumes of car refinish paint

- Rotation speed 320 rpm

- Ideal for paint, car repair and model building shops

- Mixing capacity:50-1000 ml

- Time saving through reduced mixing times

- Mixing weight: max 1 liter

- High process safety, in case of ordered lacquer mixtures PART NO. 34452

- Consistent mixing result quality - No segregating and floating of color pigments on the surface

LIST $2,325.00

Excel Seam Sealer

Fast Setting Seam-n-Joint is a fast setting super toolable mastic for sealing any type of interior or exterior seam or joint.

Where to use: Fast Setting Seam-n-Joint can be used anywhere there is a metal to metal contact.

(Door skins, trunk seams, cowl seams, floor seams, and drip rails.)

Advantages: Trunk Seams 1. Fast Setting won’t crack or peel and always stays flexible.

2. Fast Setting skins over in about 1-2 minutes.

3. Fast Setting tools out better than competitive brands.

PART NO. SSPW - PURE WHITE

LIST $8.76

PART NO. SSW - TAN

Cowl Seams

LIST $8.42

PART NO. SSB - BLACK

LIST $8.42

PART NO. SSG - GRAY

Door Skins

LIST $8.42

Floor Seams Wheel House Seams

METAL BONDING ADHESIVE (MEDIUM) #108B Features & Benefits: • Six to eight times faster than epoxy or urethane panel bonders • No welding required • Guaranteed corrosion protection • Can be riveted and resistance welded PART NO. 108B

PLASTIC REPAIR ADHESIVE (HEAT SET) #100EZ Features & Benefits: • One product for all body panels • Easily sands to a feather edge to provide undetectable repairs • No bull’s-eyes, read-throughs or halos PART NO. 100EZ

PLASTIC REPAIR ADHESIVE (FAST) #142 Features & Benefits: • Urethane chemistry for all structural and cosmetic repairs on bumpers • Undetectable feather edge • Sandable in minutes PART NO. 142

COMPOSITE ADHESIVE (SLOW) #T21 Features & Benefits: • One product bonds and finishes all plastic panels • OEM epoxy formula • Great for heavy-duty truck repair • High strength • Excellent gap-filling properties PART NO. T21

LIST $64.70

LIST $64.70

LIST $43.44

LIST $67.31

01

Qtr Panel Seams

PAGE 2

Meguiar’s M122 Surface Prep – Paint Inspection Spray - M12201, 1 Gallon

Meguiar’s M122 Surface Prep was specially formulated with professional detailers in mind to equip them with a pro-grade inspection spray that delivers maximum performance yet is still cost-effective.

M122’s versatility shines in that it functions as a safe-yet-effective pre-paint correction step to remove contaminants that otherwise may clog your pads, an inspection spray during paint correction and as a final surface prep before applying a coating. M122 also acts as a lubricating agent that will quickly & safely remove all compound and polishing residue and oils - revealing the true surface condition.

SURFACE PREP: Spray & wipe to prepare surface for paint correction, touch-up paint, or coatings REVEALS TRUE SURFACE: Reveals true paint condition for defect inspection during paint correction EASY AND QUICK TO USE: Quickly remove dust, polishing oils & compound residue for maximum bonding SAFE FORMULATION: Body shop safe formula and won’t swell or stain paint COST EFFECTIVE: Ready-to-use and cost-effective inspection spray PART NO. M12201 - GALLON

LIST $39.98

PART NO. M20122 - SPRAY BOTTLE

LIST $3.40

Motor Guard MHT-7000 High Tech Air Preparation System 1/2 NPT

REGULATOR. Six stages of air preparation in a single unit.

INCLUDED. MHT-7100 Sub-micronic hydrophilic compressed air filter and water trap, MHT-7200 silica gel desiccant dryer and activated carbon filter, MHT-7300 precision diaphraghm regulator with gauge.

FEATURES. Inlet and Oulet Port Size: 1/2 NPT, Nominal Airflow: 30 CFM, Water Trap Bowl Capacity: 16 fl. oz, Nominal Flitration Rating: . 01 Micron, Oil Vapor Removal Rating: <. 003 ppm, Nominal Outlet Dew Point Temperature: -40F, Desiccant Bead Capacity: 2 Quarts, Outlet Pressure Range: 2-125 PSI, Maximum Pressure: 125 PSI, and Temperature range: 32-120F. EASY TO USE. Quick and clean cartridge change.

PREMIUM QUALITY. Made in USA. PART NO. MHT-7000

LIST $693.00 #DP6000 - Air Filtration Display

Motor Guard now offers a Jobber Display Board featuring six of their most popular air preparation products. The sturdy, peg-board frame features a high-impact color display and includes each of products listed as well as steel peg-board hooks.

The DP-6000 is designed to maximize the point-of sale experience by allowing the customer to handle the product. Placing a DP-6000 Air Control Display Board prominently in a Jobber Store is guaranteed to drive sales of Motor Guard’s most popular air preparation products. #DP6000 - AIR FILTRATION DISPLAY BOARD INCLUDES: #D-12-2 Paint Spray Gun Filter Pk/2 #DD1008-2 Mini Desiccant Dryer Pk/2 #AC-6500 Air Control Unit 1/2 NPT #M-60R Sub-Micronic Filter/Regulator Combo #MF-35 Magna-Flex Premium Spray Booth Hose #AAV4059 Air Adjusting Valve-Needle & Seat PART NO. DP6000

LIST $502.80 02

PAGE 3

Aerosols

When we say we have everything you need to repair and rebuild vehicles, we mean it. Our new, comprehensive line of aerosols are designed for professional use, with 17 items that perform to the high standards you have come to expect from USCÂŽ.

PART NO. DESCRIPTION LIST 51001 Trim Black, 15oz Aerosol $8.46 51002 High Build Primer Surfacer, Gray, 15oz Aerosol $17.97 51003 Self Etch Primer, Gray, 15oz Aerosol $18.62 51004 Guide Coat, 15oz Aerosol $8.13 51005 Chip Guard, 15oz Aerosol $24.83 51006 Semi Gloss Black, 15oz Aerosol $8.46 51007 High Build Primer Surfacer, Black, 15oz Aerosol $19.97 51008 Flat Black, 15oz Aerosol $6.22

PART NO. DESCRIPTION LIST 51009 Flexible Primer Rose, 15oz Aerosol $16.17 51010 Gloss Black, 15oz Aerosol $6.22 51011 Plastic Adhesion promoter, 15oz Aerosol $24.90 51012 Color Blender, 15oz Aerosol $15.32 51013 Weld Thru Primer, 15oz Aerosol $22.82 51014 Glass Cleaner, 15oz Aerosol $5.33 51015 Primer Sealer, Gray, 15oz Aerosol $10.42 51017 Surface Cleaner, Low VOC, 15oz Aerosol $8.38 51018 Plastic Surface Cleaner, 15oz Aerosol $10.62

WIZARDSÂŽ Ceramic Coat For Paint Kit

No matter what you drive, Wizards Complete Ceramic Coat Kit has everything you need to protect your investment and keep it looking new. Ceramic Coat adds a super slick super gloss and super protective layer that lasts three years.

Complete Ceramic Coat Application Kit Kit Includes: - 4 oz Precoat Cleaner - 50 ml Ceramic Coat for Paint Nano Ceramic 9H+ - 4 Edgeless Microfiber Cloths - 8 oz Ceramic Boost - Applicator Pads - Nitrile Gloves PART NO. 31009

LIST $179.99

Featured Products 01.02.03 Comparison of Sanitizers 04.05 Safety First Products 06.07 Advantage (ADV) 08 Air Filtration (AFC) 09 Automotive Welding Products (AWP) 09 Atlantic Safety Products (ATL) 09 Astro Pneumatic Tool Company (AST) 10 Blaster (BST) 11 CarworX (CAR) 11 Chicago Pneumatic (C-P) 11 Dynabrade (DNB) 12 DeVilbiss (DEV)

13.14 Dent Fix (D-F)

15 Dewalt (B-D) 15 Dominion Sure Seal LTD (DOM) 15 Excel Products (X-L) 39.40.41.42.43 E-Z Mix (E-Z)

16 Farecla 16 Eagle (EAG) 17 ITW Evercoat (F-E)

18 FBS (FBS) 19.20 5Star Xtreme (FIS) 21 Flex (FLX) 22 Lord Fusor (FUS) 22 Gerson (GER) 22 GL Enterprises (G-L) 22 H&S Auto Shot (H-S) 23.24 Herkules (HER) 25 Hutchins (HUT)

25 Infratech (INF)

25 Iwata (IWA)

25 JTape (JTA)

26 Justrite (JUS) 26 Kimberly-Clark (K-C)

27 Klean Strip (KLN)

27 Legacy (LEG) 27 Launch (LAU) 28 Max-Air (MAX)

29 Malco (MAL)

29 Makita (MAK)

29 Magnet Paint (M-P) 29 Mack Brush Co. (MAC)

29 3M (MMM) 31.32 Meguiar’s (MEG) 33.34 Microflex (MIC)

35 Microflex/Ansell 36 Mirka (MIR) 36 Motor Guard (M-G)

37 Mo-Clamp (MO-) 37 Norton (NTN) 38 REVvive (RSG) 38 National Detroit (N-D)

44 NRD 44 Pro-Tek (PRK) 45.46 Presta (PRE) 47.48.49 Por15 (POR)

50 Polyvance (URE) 71.72 RBL Products (RBL)

51 RhinoPro (RHI) 52 Reading Technologies (RTi) 52 SCA Tork (MOL) 53 SprayMax (SPM) 53 SAS Safety Corp. (SAS) 54 S&H Industries (ALC, KEY, VIK) 55 SATA (SAT) 56.57.58 SEM (SEM) 59.60.61.62 S-G Tool Aid (S-G) 63 Steck (STK)

63 Stoko-KrestoGT (STO)

64 Sunmight (SUN) 65 SM Arnold (SMA) 66 Trimaco (TRM) 66 Transtar (TRN) 67 Titan (TTN)

68 U-Pol (U-P) 68.69 US Chemical (USC) 70.75 Uni-Ram (UNI) 73 Value-Works (VAL) 43 Viskon-Aire (V-A) 71 Wizards (WIZ)

74 Unitec Mfg. Go-Jack (UNT) 74

PAGE 4

F O N O S I R A P M CO SANITIZERS

GENERAL OVERVIEW OF SANITIZING Sanitizing a vehicle is actually a fairly simple process when using the correct product. Certain ingredients are recognized as germ/bacteria/mold killers and in this case SARS/Covid killers by the EPA. The RBL, Kleanstrip and Rhino DI all contain these items. In the case of the Allshield product, it is FDA an approved product. It’s recognized as a sanitizer for human skin. It is still an effective sanitizer on surfaces though, as a 70% alcohol solution has been recognized as an effective sanitizer versus the SARS/Covid virus.

It’s a great product, it’s just not great for sanitizing a vehicle.

Sanitizing is as simple as following the manufacturer’s recommendations.

Prep the car properly, fill your sprayer (a fogger, mister, spray gun or pump sprayer) with the product. Spray the product and make sure that it stays wet the proper amount of time to sanitize the vehicle. Let the product dry and deliver it to the satisfied customer!

For that job, the body shop will be paid for 1 hour of labor and $25 (check with the insurance company, it does vary) for material! It’s a money maker for the body shops for sure! Great profit for the shop and the jobber!

The RBL and KLN products are also safe for maintaining the jobber’s store, and the dealership’s showroom and offices! It’s a product that the jobber can sell on both the front end and back end of the dealership!

Dealerships of all kinds will need to do this process! Marinas, RV dealers, ATV/UTV and golf courses are all great targets! Nursing homes, schools and public buildings can all use these products. You and your jobbers are only limited by your imagination as to who can use this product!

Sanitizing is here to stay! Help your jobbers get a piece of this growing market!

PRODUCT

ALLSHIELD

RBLG200

KLN550/552 SPRAY SANITIZER RHINO DI

DOES IT SANITIZE?

YES

YES

YES*

YES

DOES IT DISINFECT?

YES

YES

NO

NO 15 MINUTES

SANITIZE WET TIME?

15-30 SECONDS

3 MINUTES

30 SECONDS

DISINFECT WET TIME?

4-10 MINUTES

10 MINUTES

N/A

N/A

CAN IT BE SPRAYED?

YES

YES

YES

N/A

CAN IT BE FOGGED?

YES

YES

NO

N/A

SAFE ON VEHICLE TOUCH SCREEN?

YES

YES

NO

YES

SAFE ON LEATHER?

YES*

YES*

NO

YES

*SAFE ON LEATHER - All products recommend testing a small spot on the leather, although there should be no problem. *ALLSHIELD IS TECHNICALLY PRODUCED FOR USE ON HANDS. IT WILL WORK AS A SURFACE SANITIZER, BUT IS NOT EPA APPROVED. MUST BE SPRAYED AND WIPED IN A VEHICLE. DO NOT USE ON LEATHER OR TOUCH SCREENS!

PAGE 5

During times like these, we need to respond immediately and effectively. We are offering that with our American-made, 99.9% effective solutions. A comprehensive lineup of sanitizers and cleaners. At 70%, our products exceed the CDC’s recommended alcohol content, protect what matters most to you.

• Made in the USA • 99.9% Effective • Safe for skin and surfaces • Exceeds CDC recommendation PART NO. 22616 - SPRAY SANITIZER 16OZ.

PART NO. 22628 - SPRAY SANITIZER REFILL, GALLON

PART NO. 22516 - GELL HAND SANITIZER 16OZ.

PART NO. 2258 - HAND SANITIZER 8OZ. PUMP

LIST $16.13

LIST $18.96

LIST $94.07

LIST $10.12

MOLD REMOVER & DISINFECTANT

Ready to use, Non Bleach based cleaner for all hard & soft surfaces incl. food surfaces (Indoor/Outdoor) - SANITIZES kills 99.99% of bacteria & viruses in 3 minutes.

- DISINFECTENT kills bacteria in 10 minutes. Can be used in hospitals, all health care offices, schools, restaurants & food processing plants.

- VIRUCIDAL kills viruses in 10 minutes on non porous surfaces.

MOLD ARMOR EPA REGISTERED PRODUCTS “These products are listed on EPA’s website as List N: Disinfectants for use against SARS: CoV-2, which is the current Novel CoronaVirus causing illnesses.

PART NO. FG550 - GALLON

LIST $30.50

PART NO. FG552 - 32OZ.

LIST $18.75

Change the way you sanitize & disinfect.

Green Earth Technologies MT. Laurel NJ G200 Sanitizer and Disinfectant kills 99.9% of illness causing germs and bacteria on contact and keeps on self sanitizing for up to one month. Our cleaner and disinfectant goes on in minutes and is non-harmful to both people and the environment, putting you, your family, house, and/or shop back in service and ready to respond when emergencies occur.

Surface Sanitizer/Disinfectant - For Professional Use Only - Non-toxi, safe for humans - Kill 99.9% of illness-causing germs for up to one month - Environmentally safe - Improves overall cleanliness and vehicle downtime - Made with organic compounds - Triclosan-free - Water-based, odorless PART NO. G200Q - QUART

LIST $32.19

PART NO. G200G - GALLON

LIST $116.53

AEROSOL PURE AIR Cleans and disinfects the air conditioning system and is proven to kill germs, bacteria, fungi and viruses while also leaving your vehicle smelling fresh. Lasts up to six months AEROSOL PURE AIR

Uses: - Cleans and disinfects the air conditioning system. - Eliminates odors caused by fungi and bacteria.

Benefits: - Effective against a broad spectrum of bacteria, yeasts, fungi, algae, and viruses, including the Coronavirus.

One-step application. Composition and Properties: Alcohols, quaternary ammonium salts, water, fragrances, biocide, dimethyl ether.

PART NO. DI

LIST $22.95

PAGE 6 JTAPE Disposable Face Shields provide lightweight

splash and anti-fog protection for procedures where exposure to blood and/or body fluids is possible.

- Designed, manufactured and tested in accordance with our ISO 9001 Quality Management System - Protects the face and eyes from splashes and sprays - Elasticated headband to fit varied head sizes - Optically clear visor for full peripheral vision - Fits over glasses - Lightweight and comfortable for long-term wear PART NO. JTA8000.2425

CONTACT YOUR LOCAL REP FOR PRICING!

DISPOSABLE PROTECTIVE MASK - Can Filter 95% Non-Oily particles, effectively block particles, droplets, body fluids, etc.

- Material: Non woven filter layer elastic non-woven fabric (three layers) - Package: 50pcs/bag,50pcs/colorbox, 50 color box/carton PART NO. REUSABLEMASK

LIST $67.14

KN95 NON MEDICAL MASK! - KN95 GRADE FILTER MATERIAL CAN FILTER - 95% NON-OILY PARTICLES, EFFECTIVELY BLOCK PARTICLES, DROPLETS, BODY FLUIDS, ETC! PART NO. MISKN95-10 (10/BOX)

LIST $64.01

PART NO. MISKN95-50 (50/BOX)

LIST $288.05

PART NO. MISREUSABLEMASK

LIST $12.00

PART NO. THERMOMETER

LIST $79.99

PAGE 7

Crocodile Cloth®

NUVIK® ALCOHOL-FREE ANTIBACTERIAL HAND WIPES

Right now, clean hands are essential—whether you’re at home, on the job or on the go. Nuvik Antibacterial Hand Wipes will help you stay clean and protected when you don’t have access to soap and water. Our dual-action cleaning and sanitizing hand wipes are gentle on skin and tough on bacteria.

The Nuvik Antibacterial Hand Wipes 80-Pack has (80) 6”x 8” cloths per pack.

Our formula is FDA registered, alcohol-free and safe, gentle and non-drying for skin. They clean and sanitize at the same time, so they are perfect for messy hands when you can’t get to a sink. The light, fresh scent dissipates quickly as hands dry.

Ideal for: - Hand cleaning and sanitizing without soap and water - Medical environments - Schools - Offices - Homes - Effective against: - Bacteria PART NO. CRD8150 ANTIBACTERIAL HAND WIPES 80/PK (ALCOHOL FREE)

LIST $12.42

PART NO. CRD8160 ALCOHOL WIPES 75%, 80/PK

LIST $20.62

Professional Products. Professional Finish.

Contec®, Inc. introduces the MAX-OFF OEM-preferred prep wipe system, a presaturated wiper designed to provide optimum surface conditioning prior to painting.

• Preferred by the Big 3 auto manufacturers • Dramatically reduces paint defects • Improves paint adhesion • Eliminates static electricity on prepared surfaces • Single-stage wiping system greatly increases productivity • Uniform surface conditioning with metered fluid release • Cleans better than aqueous or organic solvents alone.

• Reduces shop waste and solvent use.

PART NO. MOPP0002 - 11”X17” 50 WIPES/POUCH

LIST $19.77

PAGE 8

PART NO. 325-01 326-04 500-01 501-04 575-5 576-25 577-25 578-25

DESCRIPTION

Gray Primer Filler/Sealer, GA High Build DTM Activator, QT Stealth Clearcoat, GA Stealth Activator, QT Euro Max Clearcoat, 5LTR Euro Max Fast Activator, 2.5L Euro Max Medium Activator, 2.5L Euro Max Slow Activator, 2.5L

LIST

$127.80 $40.90 $111.35 $39.49 $87.92 $60.95 $60.95 $60.95

PART NO.

DESCRIPTION

LIST

700-1 Gloss Black, GA $90.15 703-1 Gloss White, GA $90.15 801-1 Lightweight Body Filler, GA $18.97 806 Finish Putty Pumptainer $25.87 3311 Rubber Undercoating, 18oz $6.30 3524 Super View Guide Coat $6.13 3530 Adhesion Promoter, 15oz $8.11 90001P #9 Razor Blades (100) $4.17

PAGE 9

BLACK NITRILE GLOVES 6 mil with pH5.5 Technology!

At Atlantic Safety Products, we take great pride in providing gloves that offer serious protection from your work environment while keeping your most important tool, your hands, in top condition for maximum productivity. Our Black Lightning gloves offer excellent barrier protection!

Breakthrough pH5.5 Technology!

Made to match healthy skin's natural pH5.5 levels to ensure the MOST comfortable fit yet!

Unique formulation reduces excess perspiration Quadruple washed - no excess chemicals lingering on the glove Super strength and stretch - no more tearing Fully textured grip Approved for medical use Tested against fentanyl

Lighthouse D211 Medical Quality Exam Gloves at a Great Price!

Red Lightning Gloves Exceptional Nitrile Glove with an Aggressive Tread Grip!

At Atlantic Safety Products, we take great pride in providing gloves that offer serious protection from your work environment while keeping your hands in top condition for maximum productivity. Our Lighthouse® Powder Free Nitrile gloves provide the superior combination of durability and protection against day-to-day hazards at a cost effective price.

At Atlantic Safety Products, we take great pride in providing gloves that offer serious protection from your work environment while keeping your most important tools, your hands, in top condition for maximum productivity. Our Red Lightning gloves offer excellent barrier protection!

Great protection and durability Made of 100% Quality Nitrile Not Made with Natural Rubber Latex Approved for medical use Non-Sterile

Fully Textured Tread Grip for superior grip in both wet and dry conditions 6 mil thickness Industrial Grade Not made from natural rubber latex to reduce acquired latex exposure allergy Beaded cuff for easy donning

PART NO. DESCRIPTION BLM Black Lightning - Medium BLL Black Lightning - Large BLXL Black Lightning - Xtra Large BLXXL Black Lightning - 2XL LIST $23.74

PART NO. DESCRIPTION D211M Nitrile Glove, Med, 200/Bx D211L Nitrile Glove, LG, 200/Bx D211XL Nitrile Glove, XLG, 200/Bx LIST $27.03

PART NO. DESCRIPTION RLM Red Lightning Nitrile Medium RLL Red Lightning Nitrile Large RLXL Red Lightning Nitrile XLG LIST $21.75

Custom Tacky (CT) Series Intake

Booth Coating & Vinyl Curtain Protectant

Liquid Mask

PART NO. BC-1C GALLON

PART NO. LM-1 GALLON

Use in crossdraft applications.

The industry favorite, the Custom Tacky® is a long life filter that is a proven performer at a great price.

- 2″ blue, 2-ply, self-sealing, tackified polyester media - 94% efficient at the 5-10 micron range @ 50-100 fpm PART NO. CT-20 20”X20”

LIST $165.11

In order to produce the most beautiful paint jobs possible, you must have spray booth walls that perfectly reflect light.

- Dries to a non-tacky film in approximately 25 min - Withstands booth baking temperatures of up to 170 ° F - Choose from clear or white formula

LIST $26.49

PART NO. BC-5C 5 GALLON

LIST $130.32

The quickest, easiest, and safest way to protect your customer’s car from paint overspray is with Air Filtration Co., Inc.’s - Dries to a clear, non-tacky film in ap proximately 25 min - Glutinous formula allows for single coat coverage, pins down dirt and flows together to form an unbroken shell

LIST $24.85

AUTOMOTIVE WELDING PRODUCTS INC. Welding Blanket “CALOR X”

DESCRIPTION LIST Welding Gloves 14” Length $20.94 Welding Blanket 3’ x 6’ $119.96

LIST $122.23

#ST-999 (50” x 80”)

• Weighs less than 3lbs. and can be held in place with tape or wire ties • 50”x 80” black blanket fits most auto hoods and machines PART NO. 800 802

PART NO. LM-5 5 GALLON

PART NO. 805 ST-999

DESCRIPTION LIST Welding Blanket 6’ x 6’ $174.00 60” x 80” Welding Blanket $172.40

PAGE 10

3” WIRE WHEEL HAND BRUSH WITH INTERCHANGEABLE HEAD #9025 • Use the popular 3” wire brush design now adapted for hand brush use • Perfect for cleaning welding beads and slag on sheet metal

2” WIRE CUP HAND BRUSH WITH INTERCHANGEABLE HEAD #9026 • Utilize the benefits of a rotary wire cup brush design now in a hand brush form for tighter access and ease of use • Replace heads when worn rather than replacing tool

27 PIECE SCRAPER SET #45027 • Includes 7 different types and sizes

PART NO. DESCRIPTION LIST

1452 1/2" HAND RIVETER KIT $150.73 2PG7S 2 Quart Pressure Pot with Gun $242.73 200SL SUNLIGHT COLOR MATCH LGHT $303.75 200SLMAX Sunlight Color Match Light $251.72 209 Onyx 3" Inline Cutoff Tool $130.28 3008 8" Gear Driven Random Orbital Sander $182.58 3037 1/2" x 18" Air Belt Sander $177.55 3050 3" Sanding/Polishing Kit $116.78 3055 3" Polisher Kit $113.55 32 Pinstripe Removal Kit $238.33 321 ONYX 2" R/O MICRO SANDER $199.08 322P 6" Composite Sander $148.60 330 Onyx 3" Finishing Palm Sander w/ Hook & Loop BK Pad $130.98 332 1.25" Air Denibbing Sander $146.25 400E Smart Eraser Pad $14.75 40SL RECHARGABLE COB LED SLIM LIGHT $89.10 40SLMAX LED Rechargable Slim Light $99.68 45027 27 Piece Scraper Set $46.58 45070 7 Piece Windshield Molding Removal Tool Set $48.18 45080 8 Piece Door Panel & Trim Removal Tool Set $41.78 4546 6" Nylon Bed Brush $33.72 4550 Air Operated Paint Shaker $289.03 4577 18" Mobile Masking Machine $83.55 50SL Rechargeable Color Match Light $119.78 500E Rapid Eraser Pad $14.75 55670 7-IN-1 Workbench w/ Wheels $241.40 557003 Work Stand 500 lb. Capacity $54.00 557012 Panel Stand $107.13 557100 The Fender Extender $32.45 605ST 5.5 MM Punch & Flange $109.00 7300 Super Stand $333.05 7306 Adjustable Paint Hanger $181.65 7600 Hot Staple Gun $178.08 78415 Locking Pliers Slide Hammer $76.95 888S Mini Straight Line Sander $166.08 9025 3" Wire Wheel Hand Brush with Interchangable Head $10.55 9026 2" Wire Wheel Hand Brush with Interchangable Head $11.95 PR14 Air Riveter 3/32" X 1/4" $184.00

of razor and non-marring scrapers for nearly all light to heavy-duty applications

8 PIECE DOOR PANEL & TRIM REMOVAL TOOL SET #45080 • Includes 8 different types of pry and trim tools for nearly all clips, trim panels and fasteners • Clip removal pliers are great to quickly release door upholstery clips, panel clips, and all other trim anchors and clips on your vehicle

7 PIECE WINDSHIELD MOLDING REMOVAL TOOL SET #45070 • Includes all of the specialized tools required to safely and quickly remove windshields for a large variety of vehicles

PAGE 11

The #1-selling penetrant since 1957!

Features #1-Selling Penetrant Breaks Free Rusted or Frozen Parts Protects Against Further Rust and Corrosion Use on Automotive, Industrial, Marine, Plumbing & Other Equipment New ProStraw™ with Control Flow Technology™ (16-PB-DS) PART NO. 16-PB-DS

B’laster Hand Sanitizer is an alcohol antiseptic 80% non-sterile, topical solution.

It is recommended for use to help reduce bacteria that can potentially cause disease.

Features - Reduces Bacteria - For Use on Hands PART NO. 8-HS-PR HAND SANITIZER POUR 8.5OZ.

LIST $7.34

PART NO. 8-HS-SPRY HAND SANITIZER SPRAY

LIST $9.21

LIST $8.25

CW-800 AQUAWORX is a high performance masking tape suitable for use in automotive repair applications. Thin profile providing a “fine-line” paint edge and temperature stable up to 90°C (194°F).

PART NO. DESCRIPTION 134.770 CW800 3/4” Tape 134.772 CW800 1.5” Tape 134.773 CW800 2” Tape

LIST $115.64 $115.64 $150.25

CW-1200 GREEN is a high performance masking tape suitable for use in automotive repair applications. Made with an extra thick backing, waterproof and temperature stable up to 120°C (248°F).

CW-900 ORANGE is a professional masking tape ideal for paint shops.

Thin backing, waterproof and temperature stable up to 90°C (194°F).

CW-480 BLONDE is a professional masking tape designed for paint shops.

Robust backing, waterproof and temperature stable up to 90°C (194°F).

PART NO. DESCRIPTION 134.840 3/4” (18mm x 55m) 134.842 1 1/2” (36mm x 55m) 134.843 2” (48mm x 55m)

PART NO. DESCRIPTION 134.820 3/4” (18mm x 55m) 134.822 1 1/2” (36mm x 55m) 134.823 2” (48mm x 55m)

PART NO. DESCRIPTION 134.805 3/4” (18mm x 55m) 134.806 1 1/2” (36mm x 55m) 134.807 2” (48mm x 55m)

LIST $161.43 $161.43 $214.82

6” Dual Action Sander

• General-duty sander with rotary • Insulated grip and lock off throttle or random orbital options to prevent accidental start ups • PSA sanding pad • Power regulator for precise control PART NO. 870

LIST $97.61

3” Mini Polisher Kit

Includes: CP7201 mini polisher plus (1) 3” backing pad, (2) 3.5” foam compounding pads (white/yellow), (1) 3.5” wool buffing pad and spindle wrench packed in a heavy-duty case PART NO. 7201P

LIST $191.78

LIST $127.51 $127.51 $165.12

Mini Angle Die Grinder • 1/4” and 6 mm collets • Built-in air regulator PART NO. 870

LIST $94.94 Mini Random Orbital Kit

• 90° angle head allows flexibility in tight areas

Includes: (1) 2” (50 mm) and 3” (75 mm) backing pads (10) 2” (50 mm) 320, 400 and 600 grit sand paper and spindle key packed in heavy-duty carrying case PART NO. 7200S

LIST $186.50

LIST $126.12 $126.12 $164.51

PAGE 12

PART NO. 50208 50209 59010 59025 59040 92245 92246 92247

DESCRIPTION

Nitro Polisher Promo Kit Nitro Polisher Promo Kit, Rotary 6” 3/8” DIA Orbital Spirit 6” 3/16 Diameter Orbital Spirit 6” 3/32” DIA Orbit Spirit Wide Wire Wheel 4” x 3/4” - Coarse Wide Wire Wheel 4” x 3/4” - Med. Fine Wire Wheel 4” x 3/4”

LIST $411.00 $308.00 $263.00 $263.00 $263.00 $34.13 $34.13 $34.13

PART NO. 92248 92255 DGR31 DS53 NF1 NZ1K RS1 EB3

DESCRIPTION

Coarse Wire Wheel 4” x 1/2” Rubber Eraser Wheel Nitro Series Die Grinder Nitro 3” Disc Sander NitroFile Abrasive Belt Tool NitroZip Versatility Kit Nitro Reciprocating Saw Nitro 3” Extended Buffer

LIST $34.13 $34.69 $130.00 $125.00 $399.00 $429.00 $200.00 $282.00

PAGE 13

DV1 Clearcoat Spray Gun FEATURES • Delivers ultimate clearcoat application performance • Sprays a uniform pattern that lays the clear flat and easily wets up a surface • Atomizes effortlessly, producing an even distribution of super-fine particles • Provides maximum comfort and easy use from set-up through the entire spraying process • Provides improved transfer efficiency and saves time completing each job

PART NO. DESCRIPTION LIST DAD-1 Desiccant 2- 5lbs. Bags $142.23 DAD-500 Desiccant Air Dryer System $1,432.79 DC-101 Paint Prep Wipe $60.21 FLG-574-13 FLG4 Pressure Feed Gun 1.3mm $298.18 FLG-670 Solvent-Based Value Kit HVLP 1.3/1.5/1.8 900cc Aluminum Cup $306.21 FLG-671 Waterborne Value Kit HVLP 1.3/1.5/1.8 20oz. Acetal Cup $306.21 FLG-675 FLG4 Pressure Feed Gun and Pressure Cup Kit 1.3mm & 1.8mm P65-CR $630.18 FLG-678 Primer Gun Value Kit HVLP 1.8/2.2 900cc Aluminum Cup P65-CR $277.35 GFG-670 Plus Gun and Cup 1.2/1.3/1.4 P65-CR $689.27 GTI-620G 2000 GTI G/F Gun with Aluminum Cup P65-CR $689.27 HA-5867 3/8” 35’ Air Hose with High Flow Fittings P65-CR $144.81 HAR-602 Air Control Unit “The Big One” P65-CR $217.08 HAR-680 81 CFM AIR LINE FILTER with 50 CFM REGULATOR P65-CR $154.03 HAV-501 Gun Regulator with Gauge P65-CR $39.83 HAV-555 Digital Gauge P65-CR $105.92 SRIPRO-635G-10 1.0mm Spot Repair Gun P65-CR $488.03 130500 CT30 Desiccant Air Dryer P65-CR $604.85 130504 DC-30 Desiccant Cartridge $128.06 130506 DC10 10lb. Desiccant $142.29 130522 CamAir CT Plus 5-Stage Filter System P65-CR $953.50 130524 QC3 Replacement $62.99 130525 QC3 Air Filter/Dryer Unit P65-CR $291.34 130546 DAD-PRO AIR DRYING SYSTEM P65-CR $1,213.34 703517 Tekna ProLite 1.3 & 1.4 No Cup P65-CR $709.99 703566 Tekna ProLite 1.2, 1.3 & 1.4 900 cc Aluminum Cup P65-CR $779.88 703567 Tekna ProLite 1.2, 1.3 & 1.4 No Cup P65-CR $709.99 703624 Tekna ProLite Presure Feed Gun 1.0/1.4 P65-CR $694.53 703661 Tekna Copper HE 1.3, 1.4 no Cup P65-CR $640.21 703662 Tekna Copper HE 1.3, 1.4 w/Cup P65-CR $698.38 703892 Tekna 1.2/1.3 BASECOAT SPRAY GUN - UNCUPPED P65-CR $709.99

PART NO. DESCRIPTION 703893 Tekna 1.3/1.4 BASECOAT SPRAY G 704174 Tekna Primer Gun 1.4/1.6 704175 Tekna Primer Gun 1.8/2.0 704198 Tekna CLEARCOAT SPRAY GUN 704307 Dgi PRO Pod Digital Gauge 704504 DV1-B Digi Gun Uncupped

704514 Premium 3-Gun Kit w/ DV1 Gun 704520 DV1 Clearcoat Spray Gun 804262 SRiPro Lite Micro Spray Gun 802342 Starting Line Gun Kit w/ Accessorie 802343 Starting Line Gun Kit w/ Accessorie 803045 DeWipe-Outs Normal Climates For 803046 DeWipe-Outs Dry Climates Formula 803048 DeWipe-Outs Refill Case

803491 Dirt Control Floor Coat 5 gallon 803492 2-Gallon Pump Sprayer 803553 Anti-Static Wiper 803557 Bumper Pre Pad

803596 Reusable Coverall Medium

803597 Reusable Coverall Large 803598 Reusable Coverall XL 803599 Reusable Coverall XXXL 803654 SHIM-MASK 803664 Reusable Lap Coat Medium 803665 Reusable Lap Coat Large 803666 Reusable Lap Coat XL 803667 Reusable Lap Coat 3XL 803668 Dirt Control Wall Coat DPC-600 Disposable Cups & Lids 34oz DPC-601 Disposable Cups & Lids 240z DPC-602 Disposable Cups & Lids 9oz

PAGE 14

LIST GUN - UNCUPPED P65-CR $709.99 P65-CR $395.91 P65-CR $395.91 P65-CR $709.99 $256.47 P65-CR $790.00 P65-CR $1,995.00 P65-CR $790.00 P65-CR $497.51 es P65-CR $235.24 es P65-CR $242.29 rmula $29.39 a $29.39 $11.04 $207.78 $54.69 $3.39 $7.98 $56.00 $56.00 $56.00 $56.00 $21.85 $33.27 $33.27 $33.27 $33.27 $139.05 $84.12 $69.18 $56.20

PAGE 15

LI-ION Battery Hot Stapler

DF-600BR The 3-in-1 portable & compact multi-use plastic repair tool!

FEATURE & BENEFITS

• CORDLESS OPERATION - No cord to get in the way while performing a plastic repair.

• HOT STAPLER TIP - Reinforce plastic repairs with staples. Tip has multiple holes to hold the staples at different angles.

• SPREAD/PATCH TIP - Install wire mesh over cracks and weld plastic over top.

• AIRLESS WELDER TIP - Feed plastic rods through the guide port for effortless welding.

PART NO. 600BR

CONTACT YOUR LOCAL REP

Plastic Tab Repair Kit DF-EZTAP Must have plastic welding accessory that recreates the perfect slot tabs!

FEATURE & BENEFITS

• 5 DIFFERENT SIZE DIES - Two of each size covers virtually all the current slot tabs.

• LAY FLAT DESIGN - Slim profile dies & double hinged hand seamer compress the ange much atter.

• LARGE COMPRESSION SURFACE - 3” head reduces warping.

PART NO. EZTAP

CONTACT YOUR LOCAL REP

7”/9” Variable Speed Polisher • Powerful, 12.0 Amp, all ball-bearing construction for long life • Electronic control maintains specified speed under load delivering desired finish results • Conveniently located variable speed dial lets user set maximum speed from • 0-600/3500 rpm for different materials and applications • External brush caps for easy servicing PART NO. DWP849

LIST $344.57

COLOR YOUR HIPPO TINTABLE BEDLINER & PROTECTIVE COATING A tough, tintable, 2 part urethane coating used to protect Truck Beds (replaces drop-in plastic liners), Trailers, Boats, Off-Road Vehicles, RV’s and almost anything that requires extreme durability.

• Apply with schutz style spray gun, brush, or roller.

• Add your own Single Stage urethane grade tint for any color!

• Aliphatic – resists fading.

PART NO. 100600

LIST $128.48 PART NO. DESCRIPTION LIST 1004 Fast Dry Gravel Guard $18.38 10001 Hippo Bed Liner .45 Gallon P65-CR $103.80 100096 Gator Guard II - Black $96.32 100600 Color your Hippo Kit $128.48 11019 “Paint Off” Hand Cleaner 1 ltr $16.35 11020 “Paint Off” Hand Cleaner 2.5 ltr $50.36 208 Nylon Cup Brush - Truckbeds $47.08 24008 Self-Etch Primer Gray $15.60 24010 Acid Etch Primer Gray $15.61 240040 Rubberized Undercoat $9.97

Glue Puller Xtreme DF-GPX A heavy duty PDR glue puller that is in a league of it’s own!

FEATURE & BENEFITS

• HD GLUE & TABS - Perform heavy duty pulls without any welding or removing of parts, paint, or protective coatings.

• PULLING HARNESS - Attach the pulling harness to machine-aided puller for the toughest pulls.

• NO HEAT - Repair heat sensitive materials.

PART NO. GPX

LIST $789.00

HD Scissors

DF-HDS1 & DF-HDSC1 Great tools to use all around the shop!

FEATURE & BENEFITS

• MICRO TEETH- Grips and precuts the material for a smooth cut.

• CABLE CUTTER- DF-HDSC1 has a notch in the blade to prevent the cable moving.

• SAFETY- Ergonomic safety lock can be toggled with a flick of the thumb.

• NO SLIP GRIP - Grooves in the handle ensure control and safety while cutting.

PART NO. HDSC1 (185MM) PART NO. HDS1 (200MM)

CONTACT YOUR LOCAL REP

FREE!

DEWALT #DWHT10272 FOLDING RETRACTABLE UTILITY KNIFE WITH EVERY POLISHER PURCHASED!

7”/9” Variable Speed Polisher w/Soft Start • Powerful, 12.0 Amp, all ball-bearing construction for long life and performance for the most demanding applications • Electronic module maintains specified speed under load delivering better finish results PART NO. DWP849X

LIST $375.20

PAGE 16

E-Z CLEAR POUR CAP BOTTLE Clear Touch-Up Bottles are made of PET shatterproof, clear plastic.

Now with an E-Z Pour airtight cap.

PART NO. 10003

LIST $78.75 PART NO. 10099 Can Opener

LIST $.56

Dabbers W/ Dispenser E-Z Dabbers are economical and useful for paint, removing imperfections, glue, lubrication and more. With a lint-free nylon tip you are able to apply as little as 1/8 of a drop. The dabbers have a tapered head for precise application and flexibility for maximum accessibility.

PART NO. 78200 (200ea.)

LIST $56.10

G360 Super Fast Compound

used with a G Mop Super High Cut Pad easily glides over the

surface and eliminates P1500 sanding marks, cutting rapidly and with little effort. This removes the need for P3000 abrasive discs, saving time and money.

Transparent in use, the operator is able to see these marks disappear permanently.

- Permanent finish â&#x20AC;&#x201C; no reworks - Save time and money - Effortless - Visibly Clear - Removes hologram and swirl marks - Reduced operative exposure to Hand Arm Vibration (HAV) PART NO. 90600

LIST $58.37

G360 Super Fast Finish,

used with a G Mop Flexible Black Finishing Foam, easily glides over the surface, eliminating swirl marks and other minor defects rapidly and with little effort, leaving an enhanced deep gloss finish. Transparent in use, the operator is able to see the permanent results.

- No reworks - Enhanced depth of gloss - Effortless - Visibly Clear - Excellent on dark colours PART NO. 90601

LIST $58.37

PAGE 17

LIST $41.06

LIST $45.58

PAGE 18

CONTACT YOUR LOCAL REP FOR PRICING! PART NO. DESCRIPTION 106

RAGE (CASE/GALLONS)

110

EVERGOLD LIGHTWEIGHT FILLER GALLONS

P65-CR P65-C

112

RAGE GOLD GALLON (CS.4)

P65-CR

116

Q Pads 12”x12” (6/PK)

120

RAGE XTREME GALLON(CS.4)

P65-C

125

RAGE ULTRA GALLON (CS. 4)

P65-C

141 EVERCOAT FILLER GALLON P65-CR 151

HIGH PROD LTWT FILLER

P65-C

156

LITE WEIGHT 3 (CASE/GA)

P65-C

181

Evercoat Commercial Ultra.

P65-CR

282 Z-GRIP FILLER GALLON P65-C 400

Polyester Putty, QT P65-C

405

EVERGOLD PUTTY 16 OZ POUCH

P65-CR

406

EVERGOLD PUTTY 30 OZ.

P65-CR

412

METAL GLAZE 16 OZ. POUCH

P65-C

414

METAL GLAZE OEM 30 OZ.

P65-CR

416

METAL GLAZE POLY. PUTTY

P65-C

417

GLAZE COAT (30OZ)

P65-C

420

Easy Sand 24oz Tube

P65-CR

421

EASY SAND 30OZ PUMPTAINER

P65-CR

424

METAL GLAZE ULTRA POUCH 16OZ

P65-C

425

METAL GLAZE ULTRA 30 OZ.

P-65-C

453

Metal Glaze® OPTEX™ - 16oz

P65-CR

454

Metal Glaze® OPTEX™ - 30oz

P65-CR

709 Slick Sand, GA P65-C 738

FINISHSAND 4:1 POLYESTER PRIMER SURFACER

P65-C

733

4:1 Poly Primer Catalyst

P65-CR

734

4:1 Poly Primer Catalyst, Fast

P65-CR

740

OPTEX 4:1 Primer Gallon

P65-CR

838 Chrome A Lite, GA P65-C 2274

Gray Acrylic Lacquer Primer, GA

P65-CR

411 Poly Flex 30oz P65-CR 439

440EXPRESS APPLIC. PK/12

440

440EXPRESS PIN-ELIM. 16OZ

444

440EXPRESS PIN-ELIM. KIT

622 Everglass, GA P65-CR 633

FIBER TECH REPAIR COMPOUND

P65-CR

713 Feather Fill Gray, GA P65-C 730

4:1 GRAY POLYESTER PRIMER

P65-C

736

FIBNER FILL 4:1 REINFORCED POLYESTER PRIMER

P65-CR

733

POLYESTER PRIMER CAT. QT.

6101

UNIVERSAL ADHESIVE

6105

PLASTIC REPAIR 5

P65-C

PAGE 19

87

$

#50300

List Price

PART NO. DESCRIPTION LIST #48080 2”x55Y K-UTG Gold Tape $23.86 #48216 Promask Refills 7” x 54’ $5.79 #48218 Promask Dispenser w/ Refills 7” x 54’ $6.76 #48405 ProBand Orange FineLine 1/16” x 60yds $7.69 #48410 ProBand Orange FineLine 1/8” x 60yds $8.71 #48420 ProBand Orange FineLine 1/4” x 60yds $10.73 #48430 ProBand Orange FineLine 1/2” x 60yds $14.80 #48505 ProBand Green FineLine 1/16” x 60yds $7.69 #48675 ProBand Le Bleu FineLine 1/16” x 60yds $7.69 #48680 ProBand Le Bleu FineLine 1/8” x 60yds $8.70 #48685 ProBand Le Bleu FineLine 1/4” x 60yds $10.73

73

.04 $

#50201

52

.44 $

List Price

#50100

.07

List Price

PART NO. DESCRIPTION LIST #48690 ProBand Le Bleu FineLine 1/2” x 60yds $14.80 #50100 Pump & Spray Viton 1.0L

$52.07 #48063 1/4”x60Y Orange K-UTG Gold Tape $7.27 #48064 1/2”x60Y Orange K-UTG Gold Tape $9.09 #48060 3/4”x60Y Orange K-UTG Gold Tape $10.11 #48080 2”x60Y Orange K-UTG Gold Tape $23.86 #48475 1/16”x60Y Red Fine Line Tape $7.69 #48480 1/8”x60Y Red Fine Line Tape $8.70 #48485 1/4”x60Y Red Fine Line Tape $10.73 #48490 1/2”x60Y Red Fine Line Tape $14.80

PAGE 20

PAGE 21

WORKS GREAT WITH BASECOAT, CLEAR OR SINGLE-STAGE APPLICATION! • Stainless steel nozzle, air cap & needle

• Working Pressure: 15-28 PSI

• Gun Weight: 514g (1.024 lbs)

• Nozzle Size: 1.3mm, 1.4 mm

• Air Consumption: 9.5 CFM

(indicated on box)

PART NO. 1310-1.3 HVLP SPRAY GUN 1.3 TIP

PART NO. 1310-1.4 HVLP SPRAY GUN 1.4 TIP

LIST $129.95

PART NO. DESCRIPTION

LIST

5062

Lightweight Body Filler

$18.96

5067

Polyester Finishing Putty

$26.13

5071

18MM x 55M Masking Tape 48/CS

$82.50

5125-1

Glamour HS Clearcoat, GA

$97.22

5150-4

Glamour Activator, QT

$56.33

5152-4

Glamour Activator, SPOT, QT

$59.57

5160-4

Glamour Activator, Multi-Panel, QT

$56.33

5541

12” x 400’ Plastic Sheeting

$23.11

5543

16’ x 350’ Plastic Sheeting

$26.94

5545

20’ x 250’ Plastic Sheeting

$30.03

5700-1

Economy Lacquer Thinner, GA

$15.60

5900-1

Wax & Grease Remover, GA

$20.84

8000-1

Single Stage Gloss Black, GA

$90.15

21

LIST $129.95

PAGE 22 #XC3401VRG

#PE 14-2150

PART NO. XC3401VRG

LIST $657.18

PART NO. 805HD BLACK HD PART NO. 806HD BEIGE HD

PART NO. 2098

LIST $71.17

LIST $23.63

Strainers (Synthetic) • 190 micron synthetic filter mesh • Exclusive custom-woven Filter media guarantees accurate micron size • Patented filter tip for quicker, more complete filtering

Supreme Tack Cloths – 28×24 Mesh 100% Bleached Cotton Gauze Substrate • Soft cotton mesh material contours to surface shapes.

• Completely removes surface particulates without leaving harmful residue.

• Wax and Silicone-Free.

• Size: 18″ x 36″.

PACKAGING: 12/box, 12 boxes/cs, 44pcs/cs

PART NO. 010714R PART NO. 010614Y 190 MICRON - YELLOW 225 MICRON - ORANGE

LIST $42.72

PART NO. 010914B 125 MICRON - BLUE

LIST $45.09

LIST $657.18

CRASH DURABLE STRUCTURAL ADHESIVE (SLOW) Features & Benefits: • Higher impact strength performance • Lifetime corrosion protection • Versatile and easy to use • Bonds plastic, e-coat and bare metals • Weld immediately

HIGH DEFINITION SPRAYABLE SEALER Features & Benefits: • Extremely flexible – won’t crack or peel • Perfectly matches all OEM seams and textures with use of Fusor 312 Sprayable Seam Sealer Gun PART NO. 802HD WHITE HD PART NO. 804HD GRAY HD

PART NO. PE 14-2150

LIST $42.72

PART NO. 010921 WATERBORNE/250 BAGS- 4 BAGS/CASE

LIST $91.02

PART NO. 020004G SUPREME TACK CLOTHS

LIST $15.90

Standard Tack Cloths – 20×16 Mesh 100% Bleached Cotton Gauze Substrate • Soft cotton mesh material contours to surface shapes.

• Completely removes surface particulates without leaving harmful residue.

• Wax and Silicone-Free.

• Size: 18″ x 36″.

PART NO. 020002 DR. GERSON BLUE TACK CLOTHS

LIST $11.95

* PART NO. 020002G SHOWN*

Premium Spray Socks • The face opening is bigger so the fabric lays flat against the face for PART NO. 1600P (20/BOX) better visibility and coverage LIST $45.60 • All fabric ends are finished PART NO.

DESCRIPTION

1100

Coster Steel Spreaders

$8.40

LIST

1100-2

2” Steel Spreaders

$1.80

1101

4” Steel Spreaders

$8.40

1102

6” Steel Spreaders

$8.40

1204

3/4” Plastic Spreaders 100/pk

22 $35.00

PAGE 23

• Synergic Program Modes: Select synergic, single-pulse synergic or double-pulse synergic.

• Synergic Inputs: Select material type, wire, size, shield gas & material thickness: pull trigger to apply perfect weld.

• Triple-Drive MIG Selection: Three guns and wire feed drives for silicone bronze, aluminum & steel MIG welding.

• Intelli-Cool Fan Function: Cooling fans function only when required to conserve energy and limit contaminants.

• Dual Drive Roll Feeders: Insures smooth feeding of small diameter and/or soft alloy welding wires.

• Dual Cylinder Cart: Supports mixed and 100% shield gas cylinders with dedicated lines and regulators.

• DC TIG Weld Function: Lift-arc TIG torch includes trigger, gas and thumb-wheel output control.

• Stick Electrode Function: Includes wide output amperage range with hot-start and arc-force adjustment.

PART NO. DESCRIPTION LIST 1001 Flexpert Welding Studs $23.42 1002 Heavy Weight Welding Studs $26.12 4550 Starter Kit Plus $326.00 7800 Head/Tail Light Rem. Set $34.00 HSW-6004 HSP40 Plasma Cutter $1,520.00 HSW-6213 HSG130A Mig Welder 115V $599.00

PART NO. DESCRIPTION LIST HSW-6420-03 HSW-6550 GPR-7570 UNI-9700 UNI-9850

HSM200A Multiweld 3-in-1 HSM250A Multi-Mig Pulse PDR Dent Repair Kit Dual Spotter Stud Gun Alum/Steel Repair Station

$2,274.00 $7,499.00 $400.00 $2,200.00 $7,850.00

PAGE 24

Competitive Comparison

H&S Exclusives: Built-in Compressor, Nitrogen Hot Iron, Nitrogen Staple, Nitrogen Cylinder Included Note: Nitrogen generator units are noisy, require highly-filtered air, expensive to maintain **ADDS $1400-$2000 to the price of the system! H&S Solution: 80CF bottle included costs $20 to fill Customer using 1 bottle per month= OVER 5 YEARS TO COST-JUSTIFY NITROGEN MEMBRANE!

H&S Autoshot Nitro-Weld Plastic Welder

UNI-8100 Product Details The Nitro-Weld offers an H&S exclusive as the ONLY nitrogen plastic repair machine with a built-in air compressor and contaminate-free nitrogen hot iron/ staple capabilities, making it the choice of professionals.

Exclusive #1 A built-in compressor allows you to free yourself from bulky hoses and noisy shop bleed air while making the system completely PORTABLE and used anywhere! The Nitro-Weld is also the most cost-efficient machine as the heated air runs during setup allowing for “on-demand” nitrogen use.

Exclusive #2 The nitrogen hot iron/staple torch offers contaminate-free nitrogen shielded repairs when reflowing or stapling. This means no contamination or toxic smoke while stapling or reflowing plastic panels. System features digital control with two torches for both air welding and hot staple/reflow functions. Unit runs on 115 volt power and features easy to use interface panel, alarm indicator for low/no gas pressure, adjustable welding temperature setting, power settings for both hot staple & hot melt/reflow, visual indicator nitrogen alert, and hot air mode for gas conservation. Package includes nitrogen welder with both welding + hot staple/ reflow torches, professional cart w/cylinder support, starter plastic and staple consumable kit, hand seamer, hot melt blades, aluminum tape, dual gauge regulator w/hose, 80CF nitrogen cylinder, and operator manual.

Input Power: 115VAC, 50/60Hz Single-phase Output Current: 5-75 Amps @ 4.6 volts Input Current: 8 Amps Gas Max Temp: 950°F (500) Dimensions: 38x13x18in System Weight: 77lbs

PAGE 25

Herkules washers are built with corrosion resistant components that support cleaning all types of paint guns; although each tank must be dedicated to cleaning one type of paint gun, either solvent or waterborne paint guns, exclusively. All Herkules Paint Gun Washers are proudly made in the USA.

ANTI-STATIC AIRLINES - Reduces static charge on plastic parts and bumpers - Lightweight, Durable design with large ID improves airflow for better spray gun & air tool operation.

Perfect for Hi-flow couplers!

- Available in 35’ & 50’ lengths.

- Operating pressures to 225 PSI. - Operating temperatures to 150° F PART NO. 1361-3A-35 (35’x3/8”)

LIST $82.83

PART NO. 1361-3A-50 (50’x3/8”)

LIST $121.48

PART NO. 14-1000 (SRU 1615 Lamp)

LIST $259.00

Herkules economical G100 Paint Gun Washer saves time by thoroughly cleaning 1 spray gun and 1 cup, or 2 spray guns, automatically in one minute. Both enclosed and automatic, the G100 limits not only dangerous VOCs, but also direct solvent-to-skin contact creating a safer work environment. Made in USA. PART NO. G100

The most popular Herkules Paint Gun Washer, the G200 automatically cleans 2 guns and 2 cups, or 3 spray guns, in one minute. This washer requires onlyfive gallons of mid to high grade solvent about every four to six weeks.

Both enclosed and automatic, the G200 not only limits dangerous VOCs, but also direct solvent-toskin contact. Made in the USA.

PROFINISHER 500 - 3/32” Offset RandomOrbit Action Sander - American-Made - Paint Shop Applications - Light Weight, Ergonomic Design - Designed to use either 5” or 6” pad

PROFINISHER 600 SERIES - 3/16” Offset Random-Orbit Action Sander - American-Made - Aggressive Material Removal - Light Weight, Ergonomic Design Designed to use either 5” or 6” pad

PART NO. G200

LIST $1,150.00

PART NO. 500 (3/32”)

LIST $224.20

PART NO. 500H (Hookit)

LIST $229.02

PROFINISHER 603 A more aggressive 3” sander that the Bodyman can use for shaping and feather-edging or bumpers, doorjambs or any small hard-to-reach area.

3/16” offset PART NO. 603 (Hook-It)

LIST $224.20

PART NO. 15-1000 (Waterborne Drying System)

LIST $329.00

LIST $1,445.00

PART NO. 600 (3/16”)

LIST $224.20

PART NO. 600H (Hookit)

LIST $229.02

PROFINISHER 700 The Model 700 is the most aggressive sander yet from Hutchins. It is the ultimate tool for anyone looking for true sanding speed.

5/16” (8 mm) offset PART NO. 700 (6” 5/16”) Offset

LIST $233.95

PART NO. 16-1000 (High Intensity Lamp - 2000 Watt)

LIST $435.00

The SUPERNOVA delivers a consistent droplet size when atomizing. This, combined with the flat, even SUPERNOVA pattern, helps reduce common application issues. All SUPERNOVA guns are equipped with stainless steel fluid passages ideal for any type of material, solventborne or waterborne.

PART NO. DESCRIPTION

#5905 Super Nova WS400 1.3 No Cup #5910 Super Nova WS400 1.4 No Cup #5935 Super Nova LS400 ENTECH HVLP #5940 Super Nova LS400 ENTECH 1.4 #4207 Eclipse HP-CS Gravity-Feed Airbrush #9276 HVLP Gravity Spray Gun Kit #2113 1.3MM WBX W400-LV w/ Regulator #2114 1.4MM WBX W400-LV w/ Regulator

LIST $818.00 $818.00 $818.00 $818.00 $187.25 $299.00 $464.00 $464.00

PAGE 26

PART NO.2210.5030

ORANGE FINE TAPE

Clear Logo Tape is designed specifically for re-fixing logos/decals/badges from all types of vehicles. Once the decal has been removed, the tape is applied with the pressure-sensitive adhesive that self-cuts, only sticking to the badge.

PART NO.2210.5030 (2”X11.8” LOGO TAPE) PRIMESHIELD Parking Sensor Masking Discs are the ideal solution for the protection of parking sensors and rubber seals during the painting process.

They alleviate the need to remove the bumper/ fender, by protecting the sensor during sanding, painting and polishing.

Primeshield is the smart solution for masking any door, bonnet/hood, or boot/trunk gap, that requires priming, and in particular high-build priming.

PART NO.1015.1535 (15M X 35M)

PART NO.4002.6017

PART NO.1015.2225 (22M X 25M )

LIST $18.00

Advanced Foam Masking Tape is one of JTAPE’s ‘hero’ products, the innovative solution to standard, round, smooth-edge foam masking tapes. A advanced Foam Masking Tape is designed to mask all apertures to prevent overspray, providing a high quality finish while saving time and money.

LIST $29.67

LIST $29.67

LIST $30.00

JTAPE Orange Fine Line Tape is thinner and more translucent than other Fine Line Tapes making it ideal for seeing through to the painted surface. It is ideal for straight lines whilst also being highly flexible.

PART NO. 1111.0355 1111.0655 1111.1255 1119.1210

DESCRIPTION 1/8” x 60Y Orange Fine Line 1/4” x 60Y Orange Fine Line 1/2” x 60Y Orange Fine Line 1/2” x 11Y Customising Tape

PART NO.1011.2050 20MM X 50M

Perforated Trim Masking Tape is an innovative concept, devised by JTAPE to mask rubber trims and mouldings during spraying. The tape’s plastic edge slides behind the rubber trim with the perforations allowing the tape to be torn and easily fixed around curves. Pulling the trim away from the body work creates a gap to allow the ingress of paint.

PART NO.1055.5010 PERFORATED TRIM MASK

No Edge Blending Tape is the smart solution for masking swage lines and panel edges to create a seamless finish from new paintwork to old. Nonstretch, No Edge Blending Tape can be applied quickly and accurately for straight edges, giving a feathered finish and eliminating reworking; removing the foam tape while the clear coat is still wet gives the perfect finish.

PART NO.1012.2025 NO EDGE PLUS MASK TAPE

Small Steel Drum Funnel Use With 5-Gal. Small Steel Funnel with Self-closing Cover and 1” Flame Arrester. For use with 5 gallon steel pails with 2” NPT PART NO.08201 5 GALLON FUNNEL W/FUSABLE LINK

Large Steel Drum Funnel Funnels intended for use with flammables are fitted with a brass flame arrester that absorbs and dissipates heat, preventing any external ignition source from reaching the drum’s flammable contents PART NO.08207 SAFETY DRUM FUNNEL

Drum Bung Wrench Fits Many 2-In Or 3/4-In Bung, Brass Alloy Drum Wrench opens drum bung caps. Rugged, nonsparking, corrosive-resistant tool fits many 2” or ¾” bung styles commonly used on drums. Design of handle protects the hand.

PART NO.08805 DRUM BUNG WRENCH

LIST $50.55

LIST $136.04

6 GALLON OILY WASTE CAN W/FOOT PEDAL Rags and cloths soaked with solvents, thinners, linseed oil, combustible adhesives and other flammable liquids present a serious fire risk when improperly discarded.

PART NO.09100

LIST $88.44

LIST $21.98

LIST $287.76

LIST $35.16

LIST $47.34

21 GALLON OILY WASTE CAN W/FOOT PEDAL 2 QUART PLUNGER CAN Rags & cloths soaked with Dispense flammable liquids and solvents solvents, thinners, linseed safely, without waste or exposure. oil, combustible adhesives Made of chemically resistant & other flammable liquids Ryton® and brass, the pump present a serious fire risk base is designed to leave less when improperly liquid in the bottom before discarded. having to refill.

PART NO.09700 PART NO.10208

LIST $169.22

LIST $67.29

LIST $6.70 $7.14 $14.00 $39.99

JTAPE’s award winning Wheel Repair Mask is the most effective way to mask a tyre when spraying an alloy wheel.

After deflating the tyre and breaking the wheel off the bead, the elasticated centre is quickly applied around the back of the rim covering the whole tyre.

PART NO.1095.1417 ALLOY REPAIR MASK BAG/20

LIST $39.50

Sure-Grip® EX Flammable Safety Cabinet, 45 Gallon, 2 Manual-Close Doors.

PART NO.894500

LIST $1,267.76

PAGE 27

WYPALL* L40 Towels • Wypall L40 disposable cleaning and drying towels: outstanding general- purpose towels • Absorbent and tough wiping towels feature a plush outer layer that’s touchable and soft • Use utility wipes for tough tasks like cleaning grease or oil

RAGS All-Purpose • Strong, durable, and multi-purpose for thousands of projects like painting, polishing, detailing, spill clean up, staining, polishing and refinishing furniture • Multi-purpose for 1,000’s of projects • White, 1 ply 10” x 13” • 200 shop towels per box

WypAll* X80 Cloths are designed to feel like a cloth & work even better. Thick, strong wipers absorb oil & water faster than rags.

• Jumbo rolls provide the larger sheet size and high count required by industrial professionals.

PART NO. 75260 (Box)

PART NO. 41025 (Roll)

PART NO. 75260 (Box)

PART NO. 34955 (X60 1 Roll/Case)

LIST $20.08 PART NO. 05701

LIST $109.60

Part No. 111-5 11131-A 123-A15 123-G 123-Q 229

Description Naked Gun Gold Cleaner 5 Gallon Naked Gun Cleaner Aerosol Bulldog Adhesion Promoter Aerosol Bulldog Adhesion Promoter Gallon Bulldog Adhesion Promoter Quart Mask & Peel White 5 Gallon

LIST $85.98

LIST $20.08

LIST $112.47

Part No. Description 362-G Prep All - Gallon EAD909 Decal Adhesive Remover, 15oz.

EPC535 Bulldog Abrasive Prep & Clean 7.6lb Tub EAR2000 Non-Methylene Chloride Paint Remover Aerosol ENGC0 VOC Spray Gun Cleaner GAR2000 Non-Methylene Chloride Paint Remover, GA

Part No. GBDP133 QAR2000 QBDP133 PPC535 FG821

Description Bulldog Adhesion Promotor Plus, Gallon Non-Methylene Chloride Paint Remover, Qt. Bulldog Adhesion Promotor Plus, Qt. Bulldog Abrasive Prep & Clean 16oz.

Overspray Remover Aerosol

CONTACT YOUR LOCAL REP FOR PRICING!

CONTACT YOUR LOCAL REP FOR PRICING! PART NO. HFZ1250YW3 (1/2”X50’)

PART NO. HFZ3835YW2 (3/8”X35’)

PART NO. HFZ3825YW2 (3/8”X25’)

PART NO. HFZ3850YW2 (3/8”X50’)

LIST $80.47 LIST $33.32

27

LIST $42.26

LIST $53.37

PAGE 28

#PBETOR20 – X-431 Torque Kit Featuring:

X-431 Torque

DESCRIPTION New for 2018, a Next Generation Professional Full Function, Full Coverage Scan Tool.

The new TORQUE includes an exciting new user interface making the TORQUE the easiest to use professional scan tool in the industry. The Torque features a unique Intelligent VIN Acquisition and Decoding Feature allowing vehicle access in seconds. The TORQUE is based on the new Open Android™ 7.1 with Google Play.

FEATURES • Features a Super Large and Bright 10.1″ WXGA, IPS Display • Intelligent VIN Acquisition and Decoding Feature: Read the VIN in seconds and identify Year-Make and Model- without any user interaction • Open Android™ 7.1″ with Surf the Web anytime via built in WI-FI • Full Coverage – Asian, Euro and Domestic Vehicles • Google™ Play – allows for download of 3rd party apps • Includes 1-Year Warranty and 12 months of WI-FI software updates • Tech to Tech Remote Diagnostics: Support remote diagnostics between shops or technicians.

Read and clear codes, live data from thousands of miles away • Includes complete OBD I connector kit with BMW and Mercedes Proprietary adapters • New Technology Bluetooth™ Wireless OBD communication for the fastest cordless experience • New Exotic Vehicle Coverage: Maserati, Ferrari, Bentley, Aston Martin, Rolls Royce, Bugatti, Alfa Romeo, Lamborghini, Maybach

Millennium TSAP:

DESCRIPTION Millennium TSAP is an activation and diagnostic tool for the TPMS system. It uses high/low radio frequency to activate and read tire pressure sensor information and uses the OBD interface to reset the TPMS controller.

FEATURES • Receive 315MHz/433MHz Sensor RF signals • Read TPMS Sensor ID, Tire Pressure, and Temperature • Read and Write Sensor ID’s on vehicles that require a TPMS OBDII interface • Display Sensor Status of Four Wheels graphically PART NO. PORTOR20 TORQUE-KIT X431, TPMS, Millenium 90

LIST $3,053.99

PART NO. DESCRIPTION LIST PBEPRO20 PRO-KIT X431, TPMS, Millenium 70 $1,943.99 PBEPAD20 PAD-KIT Pad2, Dock, TPMS, Video Scope $4,074.85 PBETORROX X431 Torque/Roxie $2,889.43

28

PAGE 29

PART NO. W989K

PROFESSIONAL PAINT GUN KIT 2 W98 HVLP Gravity paint gun S/S 1,4 & 1,7mm 1 W100 HVLP Mini gravity paint gun 1,0mm 1 125 ml Aluminum cup 1 600 ml Aluminum cup

1 1000 ml Aluminum cup 2 Air regulators 1 Cleaning kit (4 pcs) PART NO. W989K

W200

LIST $129.99 W200 - SUCTION PAINT GUN WITH ALUMINUM CUP PART NO. W200-15 (1.5 SUCTION GUN W/CUP) PART NO. W200-18 (1.8 SUCTION GUN W/CUP) PART NO. W200-20 (2.0 SUCTION GUN W/CUP)

LIST $47.75

PART NO. DESCRIPTION LIST MA-1106 6” Orbit Sander 3/16” $74.28 MA-1107 6” Orbit Sander 3/32” $74.28 W100-08 0.8 Mini HVLP GFG/Cup $38.47 W100-10 1.0 Mini HVLP GFG/Cup $38.47 W15 1.5 Suction Touch Up Gun $26.53 W98-14 1.4 HVLP Gravity Gun/Cup $45.11 W98-17 1.7 HVLP Gravity Gun/Cup $45.11 W98-20 2.0 HVLP Gravity Gun/Cup $45.11 W98-25 2.5 HVLP Gravity Gun/Cup $45.11

The Conformable Sander uses standard 2-3/4 inch (70 mm) wide hook and loop backed abrasive paper. A thin, ultra-flexible, paper-slide interface allows the block contour to be changed without buckling or tearing the paper. There is no need to re-position the paper, change the block contour, or remove the slide when changing out the paper grit or replacing worn paper. The slide accepts standard paper tear-off increments.

PART NO. DESCRIPTION LIST PART NO. DESCRIPTION LIST Conformable Sander 8" $79.17 CSH5 Conformable Sander 5" $63.62 CSH8 Replacement Slides 8" $22.62 CSH5S Replacement Slides 5" $16.97 CSH8S

7” Polisher/Sander Kit

BUY 2 POLISHERS (#9237CX2) AND GET 9557PB 4‑1/2” Paddle Switch Angle Grinder, with AC/DC Switch FREE!

Includes: • 12V Max CXT Lithium-Ion Charger • 2V Max CXT Impact Driver (Tool Only) (DC10WD) • 2 12V Max CXT Lithium-Ion 2.0Ah Battery • Tool Case PART NO. 9237CX2

LIST $452.99

CHASSIS SAVER™ is a high solids, VOC compliant, single component chassis paint and underbody coating specially formulated to permanently stop automotive and truck corrosion without the use of primers or topcoats.

For thinning CHASSIS SAVER™ Rust Preventive Paint PART NO. 8-04 (Reducer - 1 Qt.)

LIST $12.55

PART NO. 8-08 (Reducer - 1 Pint)

LIST $8.90

PART NO. DESCRIPTION LIST #99-01 Gloss Black - 1 Gallon $121.25 #99-04 Gloss Black - 1 Quart $43.30 #99-16 Gloss Black - 1/2 Pint $17.75 #970-01 Antique-Satin Black - 1 Gallon $121.25 #970-04 Antique-Satin Black - 1 Quart $43.30

PART NO. DESCRIPTION LIST #970-16 Antique-Satin Black - 1/2 Pint $17.75 #934-01 Silver-Aluminum - 1 Gallon $121.25 #934-04 Silver-Aluminum - 1 Quart $43.30 #934-16 Silver-Aluminum - 1/2 Pint $17.75

Acid Brush 1/2”

• Great for motor and engine cleaning and repair • Excellent for lead work, spreading solder & seam sealing PART NO. AB2 (BOX OF 144)

Whitey II Brush

Works well with: • Stripper • Varnish • Paint remover • Spreading resins PART NO./DESCRIPTION PART NO./DESCRIPTION LIST #2001-1/2 (1/2”) $0.44 #2001-2 (2”) #2001-1 (1”)

$0.53 #2001-2-1/2 (2-1/2”) #2001-1-1/2 (1-1/2”) $0.67 #2001-3 (3”)

LIST $42.13

The Original Mack Sword Striping Brush LIST $0.80 $1.22 $1.42

PART NO. #00 #0 #1 #2

DESCRIPTION LIST 7/32” - 6/Card $69.00 1/4” - 6/Card $72.00 5/16” - 6/Card $78.60 13/32” - 6/Card $85.20

PAGE 30 well be unpredictable, we can and should anticipate estimate swell by scheduling 20% or so less than our capacity. That was a long-winded way of saying, “Plan the work and work the plan.”

Supplements and Parts

Cycle Time: The Most Important KPI

Can we game the system to improve cycle time? Sure. But how about we simply fix cars faster?

Avatar By Carl Wilson on July 20, 2020 Carl Wilson has been painting for nearly 30 years, with formal training from the GM Training Center, ASE, I-CAR and multiple product and color courses. He currently works as a trainer/consultant for Hi-Line Distributors in Oahu, Hawaii. He can be reached at carl@refinishexpert.com.

In our body shop world, there are dozens of metrics we’re measured by. We know them as key performance indicators or KPIs: - Used/new part ratio - Repair/replace ratio - Severity - Keys-to-keys -Touch time - Ounces of paint per refinish hour - Labor hours per RO - Refinish hours per booth cycle - Booth cycles per day In any given shop, with any current pursuit, we might find any one of these as the focus of our attention. But if I were just starting the journey of improvement and wanted to concentrate on just one as a means of continued improvement, I would place my bets on cycle time – a consistent race winner across both DRP and non-DRP shops.

Call it by whatever makes sense to you or your insurance partners: cycle time, keys-to-keys, length-of-rental. But we all know it means fixing cars faster. Can we game the system? Sure, turn zero-day repairs into overnighters with one-day rentals and use those one-day repairs to lower the average length-of-rental – but come on, we can easily turn counting cards into an administrative headache, and we have enough of those. How about we simply fix cars faster?

But…what is our cycle time goal?

Based on a report by Dan Friedman, an executive at Enterprise Rent-A-Car, the average lengthof-rental for the first quarter of 2019 Q1 was 12.8 days. We want to at least mirror that – but beating it by a single day is better. Two, more so. Let’s examine cycle time killers and explore possible solutions.

Scheduling

Scheduling may well be the most challenging aspect of a consistent flow and, in my opinion, one of the top three cycle time killers. Too much work. Not enough work. Too many train wrecks.

Techs on vacation. Unexpected tow-drops. And on it goes. What, if anything, can we do to arrest the unpredictably of the workload? Schedule the work according to capacity – but more on this in a bit.

We’ve all seen in decades past – and perhaps still practice – grabbing every job possible, as many keys as we can, feeling smug and safe with a lot full of work. But if a repair process cannot be started right away, we lose cycle time days. Equally disastrous is allowing body techs to “tear down” everything in sight, effectively peeing on the job and claiming it – regardless of whether it makes sense from a cycle time perspective. Even if it is assigned to the tech for teardown and an initial RO upload for DRP compliance purposes, having too many disabled, torn-down vehicles in the shop hinders movement and productivity. We used to call it “feast or famine” before we learned that we do indeed have a little control over it.

Before we can schedule effectively, we need to know our capacity. It’s good to know our average daily billable hours, so we can multiply that by the number of days of our cycle time goal and know with certainty the sweet spot between too much and too little work we have on the property. Even better is to break that number down further, to total body and paint labor hours a day. And then by tech. This detail allows us to adjust the schedule when one of our three techs is on vacation. With 30% of our body labor unavailable, doesn’t it make sense to either a) adjust the schedule accordingly or b) huddle up the body techs and inform them of some temporary OT. If you choose “a,” then it might be wise to also huddle up the paint shop and ensure they’re aware of a temporarily diminished workload. This allows them to decide if now is the time for their own time off, or to fill the gap with a week to make progress on the owner’s 1963 Impala project.

Either way, communicate. Additionally, it’s not enough to know our daily labor hour average. For example, if we can produce 100 hours a day, we can’t schedule all side mirror replacement jobs.

It’s not reasonable to expect we’ll punch out 30 of those in a day, even if we had 30 to try. Likewise, we can’t have five 100-hour train wrecks and think we’ve got the week covered. We need balance in the workload. Segregate jobs by severity, perhaps four classes: 1) Less than $1,000 2) $1,000-$4,000 3) $5,000-$10,000 4) Greater than $10,000 This is naturally a bit subjective, but it serves as a starting point. Adjust it as it makes sense to your operation. The goal is to create a daily balance of work through the body techs who steadily feed the paint shop, while maintaining forward motion on the big hits.

Naturally, scheduling is not that simple. We know no battle plan survives contact with the enemy, and we have two we cannot control: tow-drops and estimate-swell. While the tow-drops may

I believe supplements are tied for second along with parts as cycle time killers. We’ll address them congruently, as the solution ties them together.

It’s pretty simple why we have supplements: something was missed on the estimate.

That will happen – there’s no way to get every part and labor operation on the first estimate. However, we can do a fairly decent job having only one supplement. This has been demonstrated over and over in shops all across the country, but it does require changing the old model of teardown into a newer model of disassembly.

Whatever you want to call it, when the vehicle is disassembled in its entirety, then all damage is revealed and every part required for reassembly is identified. This is easier than it may sound, but it does require a paradigm shift from our decades-old thinking.

We can’t simply remove the damaged door, leaving it intact for the transfer of parts to the new door later. We must also disassemble that damaged door so if a clip or fastener is broken, it is identified and becomes part of the single supplement up front, as opposed to on the day of delivery during put-together.

Organization of the removed and new parts becomes an integral part of making this system work. We have to stop with the practice of storing parts in the vehicle itself. They need to be stored in a fashion that makes reassembly intuitive, i.e. left-side front-door parts and fasteners stored in a labeled bag/bin alongside but separated from the leftside rear-door parts and fasteners, which are stored next to the left-side quarter panel clips and taillight.

It isn’t enough to order parts in a timely fashion; we must inspect them promptly as well. As elementary as that sounds, checking in the parts early is not universal. They all get checked eventually, hopefully not by the body tech when they need it. If the part is inspected at the time of drop-off (best case, but not always possible), then it can be rejected if it’s damaged or the wrong part. This saves us administrative time and money by not processing a “return” later. If inspected after delivery, but prior to needing it, then there is likely time to deal with an incorrect/damaged part before put-together on the day of delivery.

Perhaps the best example I witnessed for making the case to mirror-match was this: a rear door on a quad-cab truck was written for replacement. The door was ordered, received and painted off the vehicle, and the appropriate blends were made. When the body tech attempted to hang the door, he realized it was for the opposite side. Somehow, the wrong door was ordered (perhaps packaged wrong, but not likely) and, from receiving, inspecting and painting it, that fact was missed – an unusual scenario to be sure.

Was everyone out to lunch? The moral of the story? Not mirror-matching and inspecting parts as soon as possible hurts cycle time.

Communication Breakdown

So ambiguous and ubiquitous is communication (or lack of it) that it almost seems like a cop-out to state it. So, let’s drill into it and simmer it down to the goal: giving the customer what they expect, when they expect it, in a profitable fashion. To be sure, the customer may not know what they expect, and it is part of our job to communicate the proper expectations to them.

For an easy example, factory bumper covers seldom match the body color, yet it takes customers by surprise that they are not perfect upon completion. This is a failure to effectively communicate to the customer – at the time of drop-off – the proper expectation of bumper/vehicle match. This will typically result in a repaint – even if the bumper color is already within the allowable range of mismatch, all because we failed to set the proper expectation up front. Add a day or two to cycle time!

Or what about the dent, scratch or broken molding that is not accident-related but the customer wanted fixed? For whatever reason, the info did not make it to the floor of the shop, and now the job is rejected during delivery. Add a day or two to cycle time!

We’ve already covered wrong/damaged parts, but this also falls under “communication.”

Are due dates being effectively communicated and updated to the floor of the shop?

There are two angles here: first, are we working on the pertinent jobs? Are we painting jobs that can be assembled tomorrow and delivered, or are we painting vehicles that have a crucial part for reassembly on back order? This ties into No. 2: claiming that, at all costs, “this must be painted tonight for tomorrow’s delivery” – only to find out that there are missing parts. You can’t expect a painter to continually sacrifice his family on the altar of work for jobs that “had to go” but couldn’t for whatever reason without developing a “to-hell-with-it, paint-it-tomorrow” attitude. Add another day or two of cycle time!

Are the proper repair procedures being communicated in a timely manner? Does the proper procedure require any special tools or material? Is the job waiting for those tools or materials? Here’s an illustration to drive this point home: when Ford rolled out their aluminum-bodied F-150 a few years ago, the procedure for replacing a bedside was different than how the factory built it. I witnessed a shop cut off the old bedside and trim and prepare for welding on the new one, even though the repair procedure required that they glue and rivet it back together. They had neither the proper material or approved rivet gun to complete the repair. I believe they had to add four days to that job as they scrambled to rent a tool from a competitor shop.

Closing the file promptly is a no-brainer but I feel like I have to mention it. Because even though this process can be reduced significantly if we consistently update and even pre-close the file, many shops do not do this. Eliminating multiple supplements will also demonstratively reduce the time it takes to close a file.

Summary

You may notice that with the exception of communication, which is universal, the common theme of cycle time killers is administrative: scheduling, supplements and parts.

Yes, there are additional areas to focus on as well, so we’ll look at procedures in the shop where efficiencies can improve touch time – and ultimately cycle time – in my next article. BSB

PAGE 31

3M™ PPS™ Series 2.0

is our next generation, highest performing disposable spray cup system.

- New quarter-turn lid locking system locks lid to cup and eliminates paint build up As a painter, you take great pride in your and cross threading work. You know that the ultimate quality of the - Redesigned adapters provide four points of connection from spray gun to lid, improving stability repair depends on the job you do in the paint and confidence especially in large applications booth. You don’t have time to fool around with - Domed lid geometry and a wider fluid spout allows up to 3 fl. oz. (90 mL) of material to be held below the filter reducing inconsistent spray due to air-entrapment and sputter Full-diameter filters unproven tools or discounted supplies. Time is are built into every lid for the highest quality filtration; aids with fluid flow money, quality is king and you’ve got vehicles to - A new reusable hard cup is included in every lid/liner kit move out the door.

- Mixing ratios are printed on each cup and a clear access window allows users to grasp liner while removing the lid, making tinting/refilling easier That’s why 3M invented the first disposable - Enlarged sealing plugs provide stable base for cups to be placed upside down, keeping filters wet during temporary sealing and protection of coatings not in use paint cup system nearly 20 years ago—the - 3M™ PPS™ (Legacy) red dispensers can be used with 3M™ PPS™ Series 2.0 3M™ PPS™ Paint Preparation System. Painters - 3M™ PPS™ reduces cleaning solvent consumption by up to 70% and reduces prep and needed a cleaner, faster, more efficient method clean-up time by up to of mixing and applying paint.

- 50%; compared to conventional paint cup systems

Part No. Description

Part No. Description

26000

PPS2.0 Standard Lids & Liners, 200u Micron Filter 8277

26024

PPS2.0 Large Lids & Liners, 200 Micron Filter

16000

Standard Lids & Liners, 200u Micron Filter

26028

PPS2.0 Micro Lids & Liners, 200 Micron Filter

16024

Large Lids & Liners, 200u Micron Filter

26112

PPS2.0 Midi Lids & Liners, 200u Micron Filter

16301

Standard Lids & Liners, 125u Micron Filter

26114

PPS2.0 Mini Lids & Liners, 200 Micron Filter

16114

PPS Mini Lids & Liners, 200u Micron Filter

26301

PPS2.0 Standard Lids & Liners, 125 Micron Filter

16550

Sun Gun II Light Kit

26312

PPS2.0 Midi Lids & Liners, 125 Micron Filter

26334

3/4” Green Masking Tape, 48 Rolls/Box

26314

PPS2.0 Mini Lids & Liners, 125 Micron Filter

26338

1 1/2” Green Masking Tape, 16 Rolls/Box

26325

PPS2.0 Large Lids & Liners, 125 Micron Filter

26340

2” Green Masking Tape, 12 Rolls/Box

26328

PPS2.0 Micro Lids & Liners, 125 Micron Filter

26689

High Power Spray Gun Cleaner

36172

6” 80G Blue Hookit Discs (50/Box)

30760

6” P800 Purple Clean Discs

36174

6” 120G Blue Hookit Discs (50/Box)

30761

6” P600 Purple Clean Discs

36175

6” 150G Blue Hookit Discs (50/Box)

31131

Platinum Select Filler

36176

6” 180G Blue Hookit Discs (50/Box)

31180

Platinum Plus Finishing Glaze, 30oz

36177

6” 220G Blue Hookit Discs (50/Box)

31370

6” 40G Cubitron II Discs

36178

6” 240G Blue Hookit Discs (50/Box)

31371

6” 80G Cubitron II Discs

36180

6” 320G Blue Hookit Discs (50/Box)

31373

6” 150G Cubitron II Discs

36181

6” 400G Blue Hookit Discs (50/Box)

31374

6” 180G Cubitron II Discs

36182

6” 500G Blue Hookit Discs (50/Box)

31462

3” 240G Cubitron II Discs

36183

6” 600G Blue Hookit Discs (50/Box)

31463

3” 320G Cubitron II Discs

36184

6” 800 Blue Hookit Discs (50/Box)

31472

5” 240G Cubitron II Discs

6652

3/4” Yellow Masking Tape, 48 Rolls/Box

31473

5” 320G Cubitron II Discs

6654

1 1/2” Yellow Masking Tape, 24 Rolls/Box

31481

6” 220G Cubitron II Discs

6656

2” Yellow Masking Tape, 24 Rolls/Box

31483

6” 320G Cubitron II Discs

6541

3/4” Highland Masking Tape, 48 Rolls/Box

34449

Cubitron II 320G Sheet Roll

6542

1 1/2” Highland Masking Tape, 24 Rolls/Box

36202

6” 80G Stikit Blue Disc (25/Roll)

6543

2” Highland Masking Tape, 24 Rolls/Box

36204

6” 120G Stikit Blue Discs (25/Roll)

8270

SMC/Fiberglass Repair Adhesive, 1

36206

6” 180G Stikit Blue Discs (25/Roll)

8271

SMC/Fiberglass Repair Adhesive

36210

6” 320G Stikit Blue Discs (25/Roll)

8272

SMC/Fiberglass Repair Adhesive, 10

36214

6” 800G Stikit Blue Discs (25/Roll)

8273

SMC/Fiberglass Repair Adhesive, 35

36852

3M Dirt Trap Wall & Floor (28”x300’ White)

8274

SMC/Fiberglass Repair Adhesive, 90

37852

3M Dirt Trap Wall & Floor (28”x300’ Gray)

8275

Rigid Parts Repair Adhesive, 400mL

36853

3M Dirt Trap Wall & Floor (56”x300’ White)

CONTACT YOUR LOCAL REP FOR PRICING!

Figerglass Matting Adhesive, 400mL

31

Now, after thousands of hours of watching and working with hundreds of painters around the world, 3M scientists have redesigned the 3M™ PPS™ System while keeping the most effective parts.

Introducing the 3M™ PPS™ Series 2.0 Spray Cup System.

Reinvented from top to bottom, it’s designed to help make your life easier. To make your painting process cleaner and faster. And to make you a better, more productive painter—more confident in the quality of your work and better able to exceed the expectations of your customers and your shop.

It’s the next evolution of the 3M™ PPS™ painting revolution. Don’t let anything come between you and a faster, cleaner, higher quality paint job. Demand 3M™ PPS™ Series 2.0.

PAGE 32

32

PAGE 33

Meguiar’s M122 Surface Prep – Paint Inspection Spray - M12201, 1 Gallon Meguiar’s M122 Surface Prep was specially formulated with professional detailers in mind to equip them with a pro-grade inspection spray that delivers maximum performance yet is still cost-effective. M122’s versatility shines in that it functions as a safe-yet-effective pre-paint correction step to remove contaminants that otherwise may clog your pads, an inspection spray during paint correction and as a final surface prep before applying a coating. M122 also acts as a lubricating agent that will quickly & safely remove all compound and polishing residue and oils - revealing the true surface condition. This is the ideal product to use safely strip the surface and leave the finish completely bare so you can obtain maximum adhesion for ceramic coatings or touch-up paint.

This ready-to-use formula isn’t heavy in solvents, is body shop safe and is uniquely formulated so it won’t swell or stain paint making it safer to use than pure isopropyl alcohol. Labeled, OSHA-compliant secondary bottle (M20122) is also available for easy handling and identification.

PART NO. M12201 - GALLON

LIST $39.98

33

PAGE 34

Meguiar’s 799 Pro Ceramic Bead Booster – Ceramic Boost To Maintain Ceramic Coatings - M79932, 32 Oz INCREASED GLOSS & PROTECTION: Hybrid Ceramic Si02 spray sealant restores gloss, slickness & beading to coatings MULTIPLE USES: Versatile and dilutable formula works as a spray sealant, boosted detailer & clay lube DURABLE PROTECTION: Durable beading protection on Paint Protection Film, paint & coatings EASY TO USE: Convenient mist and wipe can even be used in full sun PART NO. G190526

LIST $19.01

Meguiar’s Hybrid Ceramic Wax – Easy to Use Ceramic Wax Protection - G190526, 26 oz EASY TO USE: Just spray on, rinse off & dry! It’s that easy! LESS EFFORT & MESS: No rubbing, curing, buffing or mess HYBRID CERAMIC WAX PROTECTION: Advanced SiO2 hybrid technology delivers ceramic wax protection MORE THAN A WAX: Protection & durability beyond conventional wax WATER BEADING PROTECTION: Ceramic wax protection with extreme water beading action PART NO. M79932 (QUART)

LIST $39.98 Meguiar’s M27 Hybrid Ceramic Sealant – Si02 Ceramic Paint Sealant - M2716, 16 Oz ADVANCED SI02 FORMULA: Hybrid Ceramic Si02 sealant provides our most durable professional sealant to date USE ON PAINT OR PAINT PROTECTION FILM: Incredible gloss, slickness & beading on paint & Paint Protection Film NON-STAINING SEALANT: Won’t stain trim or decals EASY TO USE: Can be used in sun and very easy to wipe off PART NO. M2716 (16OZ.)

LIST $29.98

PART NO. DESCRIPTION LIST D10105 All Purpose Cleaner, 5 GA $75.60 D10701 Citrus Power Cleaner Plus, GA $18.22 D10705 Citrus Power Cleaner Plus, 5GA $80.06 D10801 Super Degreaser, GA $25.81 D10805 Super Degreaser, 5 GA $108.11 D11301 Citrus Blast Wash & Wax, GA $25.99 D11305 Citrus Blast Wash & Wax, 5GA $99.99 D14001 Wheel Brightener, GA $24.79 D14005 Wheel Brightener, 5 GA $112.83 D17001 Hyper Dressing, GA $59.99 D17005 Hyper Dressing, 5 GA $290.01 D180101 Wheel/Paint Iron Decon, GA $79.98 D180105 Wheel/Paint Iron Decon, 5 GA $319.98 DFC6 6” DA Foam Cutting Disc $13.52 DFP6 6” DA Foam Polsh Disc $13.52 DFF6 6” DA FOAM FINISH DISC $13.52 DMX6 6” DA Xtra Cut Disc $30.17 DMC6 6” DA Cutting Pad 2/Pk $28.87 DMF6 6” DA Finishing Pad 2/Pk $27.50 M11001 Ultra Pro Speed Compound, GA $149.98 M11032 Ultra Pro Speed Compound, QT $47.98 M21001 Ultra Pro Finish Polish, GA $131.98 M21032 Ultra Pro Finish Polish, QT $43.98 MT300 Dual Action Polisher $290.15 D180101 Wheel & Paint Iron Decon - Gallon $79.98 D180105 Wheel & Paint Iron Decon - 5 Gallon $319.98

34

PAGE 35

Part No. N641 N642 N643 N644 N645

Description Onyx Nitrile Black SM Onyx Nitrile Black Med Onyx Nitrile BlackLG Onyx Nitrile Black XL Onyx Nitrile Black XXL

LIST $19.04

Part No. Description SU690S Supreno SE Nitrile SM SU690M Supreno SE Nitrile Med SU690L Supreno SE Nitrile LG SU690XL Supreno SE Nitrile XL

LIST $23.34

PART NO. 93-260M 93-260L 93-260XL 93-260XXL 97-003M 97-003L 97-003XL MF300S

DESCRIPTION Chemical Resistant Glove - Medium Chemical Resistant Glove - Large Chemical Resistant Glove - XLarge Chemical Resistant Glove - XXLarge Active Armour Gloves, Medium Active Armour Gloves, Large Active Armour Gloves, XLarge P65-C Diamond Grip Small - Box/100

LIST $25.95 $25.95 $25.95 $25.95 $25.49 $25.49 $25.49 $20.43

PART NO. MF300M MF300L MF300XL MK296S MK296M MK296L MK296XL

DESCRIPTION Diamond Grip Medium - Box/100 Diamond Grip Large - Box/100 Diamond Grip XLarge - Box/100 Midnight Black Nitrile Small - Box/100 Midnight Black Nitrile Medium - Box/100 Midnight Black Nitrile Large - Box/100 Midnight Black Nitrile XLarge - Box/100

LIST $26.66 $26.66 $26.66 $22.66 $22.66 $22.66 $22.66

PAGE 36

RINGERS 065 KEY FEATURES AND BENEFITS - Breathable knit shell offers cut resistance - TPR impact protection on top of hand and full length of fingers - Half-dipped nitrile coating on palm with sandy finish for enhanced grip - High visibility for increased safety - Touchscreen compatible index, middle and thumb tips - Superior grip on wet and dry surfaces RECOMMENDED FOR - Makeup and breakout tools - Running tools into the wellbore - Handling structural and - Handling explosives body components - Engagement and release of drill string slips - Handling parts with sharp, rough edges - Unloading and stacking pipe - Preparation of site - set-up and disassembly of tool string PART NO. DESCRIPTION - Set-up of pressure manifold and tubing injector head 065T-09 R-Flex Impact Nitrile M - General pumping work 065T-10 R-Flex Impact Nitrile L 065T-11 R-Flex Impact Nitrile XL - Operating of heavy machinery 065T-12 R-Flex Impact Nitrile XXL - Equipment maintenance and repair LIST $23.32 - Pipe handling

Mirlon Total™ has been developed using Mirka innovative Total

Coating™ Technology. The new technology makes Mirlon Total™ extremely aggressive, although it is thinner, more open and flexible than its forerunner. The reinforced fibers make Mirlon Total™ both strong and durable. The dense scratch pattern makes the tension on the sanding surface smaller, optimizing the painting result.

• Dense scratch pattern and fast sanding result • Aggressive Available in

PART NO. DESCRIPTION 18-118-447 18-118-448 18-118-449

Very Fine Scuff Pad (Red) Ultra Fine Scuff Pad (Gray)

CONTACT YOUR LOCAL REP FOR Micro Fine Scuff Pad (Gold) PRICING!

Iridium Ceramic/Alox Paper-Backed Abrasives

• Fast sanding and consistent scratch pattern saves you time and money • Consistent quality and non-stick coating repels dust and provides a long disc life • Premium paper backing offers remarkable flexibility and grain adhesion

PART NO.

DESCRIPTION

24-6MH-040 24-6MH-080 24-6MH-180 24-6MH-240 24-6MH-320 24-6MH-400 24-6MH-500 24-6MH-600

Iridium 6” 40G Grip Disc Iridium 6” 80G Grip Disc Iridium 6” 180G Grip Disc Iridium 6” 240G Grip Disc Iridium 6” 320G Grip Disc Iridium 6” 400G Grip Disc Iridium 6” 500G Grip Disc Iridium 6” 600G Grip Dis

CONTACT YOUR LOCAL REP FOR PRICING!

PAGE 37

DP5000 SANDING BLOCK DISPLAY #DP5000 - SANDING BLOCKS INCLUDE: #SB-1 Soft Block Dual-Sided Sanding Block #HT-1 Holey Terror Dual-Sided Sanding Block #WB-1 Wonder Block Supreme Sanding Block #MB-1 Memory Block Dual-Sided Sanding Block #RK-1 Rocker Block 6” Disc Sanding Block #RL-1 Roller Block ergonomic Sanding Block #BGR6-1 Rigid Block 6-1/2 in Sanding Block #BGR12-1 Rigid Block 11 in Sanding Block #FB-1 Flexi-Block Rectangular Sanding Bar #FB-2 Flexi-Block Double-D Sanding Bar #FB-3 Flexi-Block Curved Sanding Bar #MB-10 Mini-Block Miniature Rectangular Sanding Block #MB-11 Mini-Block Miniature Double-D Sanding Block #MB-12 Mini-Block Sanding Block, Curved Shape PART NO. DP5000

LIST $115.00 JO-1050 Magna-Spot Entry Plus Kit • 1 Magna-Spot 1000 Stud Gun • 1 Heavy Duty Magna Slide Hammer • 1 Storage Carton • 1 Electrode • 500 2.0 mm Draw Pins

PART NO.

M-1000, the System Supreme, utilizes a 5 micron water and particulate trap, followed by a .01 micron oil, water and particulate scrubber, delivering Super Clean, Dry OilFree air to the high efficiency desiccant bed

• 1 Magna-Spot 1000 Gun • 1 Slide Hammer • 1 Storage Container • 1 Electrodes • 100 2.0mm Draw Pins

PART NO. M1000

WATERBORNE PRODUCT! LIST $743.80

PART NO. JO1000

PART NO. JO1050

LIST $425.00

Desiccant Dryer

Magna Spot 1000 Included In The Kit:

LIST $395.00

DESCRIPTION

LIST

JO1050 STUD WELDING KIT $442.00 M1000 Filter Supreme System $804.55 MC100 Activated carbon filter $145.55 MHT-7000 HI Tec Air Filtration System $693.00 MS1KIT Plastic Repair Kit for Stud Welders $135.15 MS2500 Magna Sticher Plastic Repair System $259.95 MS2004 Magna Sticher “S” Stake 50/PK $34.30 MS2005 Magna Sticher “M” Stake 50/PK $34.30 MS2006 Magna Sticher “V” Stake 50/PK $34.30 MS2007 Magna Sticher “W” Stake 50/PK $34.30 MS2014 Magna Sticher “S” Stake 100/PK $58.20 MS2015 Magna Sticher “M” Stake 100/PK $58.20 MS2016 Magna Sticher “V” Stake 100/PK $58.20 MS2017 Magna Sticher “W” Stake 100/PK $58.20

AP6 Flexi-Block Assortment $24.95 BGR1 BIG BLOCK 1.5”X11 RIGID $7.15 BGR61 BIG BLOCK 5.5” RIGID $10.35 BGR121 BIG BLOCK 11” RIGID $13.60 DP5000 Sanding Block Display Board $115.00 FB1 RECTANGULAR FLEXI-BLOCK $7.75 FB2 DOUBLE-D FLEXI-BLOCK $8.80 FB3 CURVED FLEXI-BLOCK $9.85 J20014 2.0 MM PINS (BOX/500) $21.60 J20015 2.5 MM PINS (BOX/500) $23.80 JMC300AL 3” ALUM.CUT OFF WHEEL PK/5 CALL REP! JMC400AL 4” ALUM.CUT OFF WHEEL PK/5 CALL REP! JO1000 MAGNA SPOT 1000 $411.00

Universal Tram Gauge w/storage case

Measures from 21/2” (65mm) to 11’ (3.3m). Level bubble installed in sliding head for accuracy in measurement. Includes hard plastic storage case. Weight: 13 lbs

Tac-N-Pull™ with Plates

• Gripping Surface: Up to 3” wide (76 mm) • Overall Length: 51/2” (140 mm) • Weight: 3 lbs (1.36 kg) • Capacity: 3 tons PART NO. 0800

LIST $143.20

Tac-N-Pull™ “PLATES ONLY”

• Ten (10) #0801 1” Pull Plates • Five (5) #0802 11/2” Pull Plates • Five (5) of #0803 3” Pull Plates.

For use with the #0800 Tac-N-Pull Clamp. (Clamp not included in kit.)

PART NO. 0803 (3” Full Plate)

LIST $7.48

PART NO. 0805 (Full Plate)

LIST $79.56

PART NO. 7000

LIST $1,031.75

T.O. (Tight Opening) Clamp

• Gripping Surface: 1½” wide (38 mm), ½” deep (13 mm) • Overall Length: 6½” (165 mm) • Weight: 3 lbs (1.36 kg) • Capacity: 3 tons (2,722 kg) • Heat Treated Steel.

PART NO. 0551

LIST $304.30

PAGE 38

“Check out at these quality Vac Abrasives”

PART NO. DESCRIPTION LIST 03344 12’x400’ Blue Sheeting $54.33 03345 16’x350’ Blue Sheeting $70.59 03723 20’x350’ Blue Sheeting $93.43 06727 12’x400’ Clear Film, 0.4 MIL $39.92 06728 16’x400’ Clear Film, 0.4MIL $53.22 06166 Maroon Thin-Flex Primer Prep Pads $25.96 06167 Gray Thin-Flex Color Prep Scuff Pads $25.96 07770 Multi-Air Cyclonic Dry Ice NorGrip Discs 6” P80C $65.40 07775 Multi-Air Cyclonic Dry Ice NorGrip Discs 6” P180B $54.62 07781 Multi-Air Cyclonic Dry Ice NorGrip Discs 6” P320B $54.62 07784 Multi-Air Cyclonic Dry Ice NorGrip Discs 6” P400B $54.62 12400 Norton Vac Rack Bundle (Cart, Vac & 1 Hose) $2,416.39 34770 Maroon Primer Prep Scuff 6” Discs $27.09 34771 Gray Primer Prep Scuff 6” Discs $27.09 70746 Premium Foam Masking Tape Contact your local rep 70735 Foam Masking Tape Contact your local rep

PART NO. DESCRIPTION LIST 91011 REVIVE Rocker Panel Texture Gray $21.76 91012 REVIVE Rocker Panel Texture Black $21.76 91013 REVIVE Satin Trim Aerosol $12.68 91014 REVIVE Matte Trim Aerosol $12.68 91015 REVIVE E-Coat Black Aerosol $18.40 91016 REVIVE E-Coat Gray Aerosol $18.40 91022 REVIVE Cavity Wax $16.77 97505 6” P80D BLAZE VAC DISCS $69.51 97506 6” P120D BLAZE VAC DISCS $58.08 97507 6” P150D BLAZE VAC DISCS $58.08 97508 6” P180D BLAZE VAC DISCS $58.08 97509 6” P220D BLAZE VAC DISCS $58.08 97510 6” P80D BLAZE GRIP DISCS $63.54 97513 6” P180D BLAZE GRIP DISCS $53.77 98021 1/2”x18” 40G File Belt (Pk/50) $126.82/pk $2.54/ea

PAGE 39

ACRYLIC ENAMEL

FEATURES

#30005 Gloss Black #30010 Pure White #30146 New Cat Yellow #30323 Porsche Red #30625 Catlina Blue

DESCRIPTION

A high solid Medium Dry coating formulated to provide good corrosion protection when used on properly primed metal.

Improved thru dry and better gloss and color retention than a standard alkyd.

#30628 Midnight Blue #30629 Dark Blue Metallic #30285 Smoke Charcoal

RECOMMENDED USES For the protection and decoration of machinery, tanks,structural steel, equipment, piping, bridges, and power plants.

#30288 Dark Charcoal #30289 Light Gray Metallic

PHYSICAL PROPERTIES

SURFACE PREPARATION

GENERIC TYPE

Acrylic Modified Medium Oil Enamel

COLOR

Complete range of colors

GLOSS

High

SOLIDS CONTENT

48% by weight, 38% by volume

All surfaces must be dry, clean, and free from all dirt, oil, and grease and properly primed. Remove all loose or scaling paint. Clean any oil, grease or wax residue. Use appropriate primer or compatible coating. Sand primer coat if necessary and remove all dust particles after sanding.

VISCOSITY

56-58 +/- 2 KU

SHELF LIFE

One year

FLASH POINT

55°F

COVERAGE

608sq.ft. per gal. at 1mil (theoretical coverage)

THICKNESS

Recommended 1.5-2.0mil DFT

DRY TIMES

45-60 min to tack-free 4-6 hour to recoat 12-24 hours to dry hard

APPLICATION

MIXING INSTRUCTIONS Mix well before using. Make sure to stir from bottom to top to ensure proper mixing.

• 8 Parts Paint • 1 Part AH988 Synthetic Catalyst (optional) • ≤10% UR Series Reducer (spray application) • (Provided local VOC regulations allow)

Do not apply in rain, excessive humidity or in freezing weather. For spray application, thin with CPS UR Series Reducer or other appropriate thinner as needed. Thinning adds to VOC content - check local regulations. Can be catalyzed with AH988 Synthetic Catalyst. Apply paint over clean surfaces for best finish. Apply smooth even coats not to exceed 5 mils wet, as wrinkling (loss of gloss) and slowing of dry may occur from excessive one coat thickness. For additional information, contact authorized distributor. Brush, roller, or spray.

RECOATING

EQUIPMENT

For best results, application of additional coats should take place within 24 hours. Prolonged delays may require cleaning and roughening of the undercoat to ensure optimum intercoat adhesion.

The following equipment has been found suitable; however, equivalent equipment may be substituted. Air Spray: 1.6 -1.8 needle, Conventional or HVLP Airless: Graco 240-000 gun, 0.15 orifice, 30:1 pump

CLEAN UP

Clean all equipment immediately after use with CPS UR Series Reducer or lacquer thinner.

PAGE 40

GREY AEROSOL PRIMER EXCEL Grey Aerosol Primer is a specialty coating designed for easy and convenient priming of metal and plastic parts.

This prevents rust and seal out moisture, while providing a smooth base for topcoat application on metal substrates. #70 has excellent flexibility and adhesion properties that enable them to be applied to flexible and rigid parts.

EXCEL Grey Aerosol Primer is a fast drying, provide superior fill and build, and are easy to sand. Itâ&#x20AC;&#x2122;s compatible with virtually all automotive paints.

PART NO. 70

LIST $9.11

ADHESION PROMOTER AEROSOL 12 OZ.

GUN CLEANER AEROSOL

FOAMING GLASS CLEANER 19 OZ

PART NO. 12316

PART NO. 43

PART NO. 55

One component adhesion promoter formulate for superior adhesion over bare plastic and painted surfaces.

Excellent for areas that cannot be reached for sanding.

LIST $18.00

- Works on solvent & waterborne paints - Quickly dissolves paint - Pinpoint spray

LIST $5.88

This easy to use cleaner and polish uses a clinging foam to break up soil. Will not drip, run or streak.

Specially formulated to be ammonia free.

- Fast drying - Available in 20oz.

- Non-Streak formulation - Leaves no film - Spray and wipe clean

LIST $4.51

PRE CLEAN AEROSOL 16 OZ

TRIM BLACK SATIN AEROSOL 450 ML

PART NO. 62

PART NO. 78

Fast-Acting Wax & Grease Remover for many automotive surfaces.

- Removes old wax build up - Mirror-like finish - Great for removing silicone and road film

LIST $7.96

- Replicates (OEM) factory look Restores original appearance to body panels, - Satin finish under hood, chassis and wheels.

- Excellent , pigment density, - Suitable for use over existing essentially single coat coverage paint surfaces - Fantastic adhesion; Apply direct to TPO, - Does not require a primer EDPM, and polypropylene without - Retains flexibility adhesion promotor

LIST $11.52

RUBBERIZED UNDERCOAT 16OZ PAINTABLE

HIGH BUILD CLEAR COAT AER 450ML UV RESISTANT

PART NO. 83

PART NO. 96

Rubberized Undercoating Spray is an ideal protectant for coating fender replacements, new panels, section repairs and weld joints.

Leaving a paintable surface, the spray prevents rust, deadens sound and seals out moisture quickly and easily. In addition, it resists salt corrosion.

- Seals out moisture - Deadens sound - Retards rust - Paintable

LIST $10.22

X-L 96 is a 1K, ready to use clear coat in an aerosol. It is used for finishing coated surfaces in order to achieve a high gloss, UV resistant, durable finish. A new high performance clear coat that gives 2K performance with the convenience of an aerosol. X-L 96 is the ultimate repair tool; it is crystal clear, has excellent build and is compatible with water-based base coats.

The cured X-L 96 has excellent gloss and image depth it is ideal for spot repairs and gives a durable. UV resistant finish. X-L 96 is isocyanate free.

LIST $11.34

PAGE 41

XCELLENT

TRUCK BED LINER Excelâ&#x20AC;&#x2122;s XCellent Truck Bed Liner defends against rust, corrosion and salt. This ultra-tough urethane coating is designed to be resistant to scratching and UV rays. It is waterproof and flexible with high adhesion. It also helps deaden sounds and vibrations. It will drastically improve the overall appearance of all truckbeds. Very easy application process.

Recommended Uses Include: Truck beds, trailers, equipment, deer stands, boats and much more!

PART NO. X800 XCELLENT BLACK TBL KIT PART NO. X810 XCELLENT TINTABLE TBL KIT

CONTACT YOUR LOCAL REP

PAGE 42

EURO CLEAR UNIVERSAL CLEAR COAT EURO CLEAR 2.1 is a European style 2k urethane clearcoat. This high solids, 2:1 mix ratio clearcoat features excellent flow, gloss, distinction of image, and durability. Proper surface preparation is essential to achieve a high quality finish. Read the SDS sheet and wear proper protection, which may include gloves, eye protection, and/or other protective devices.

UNIVERSAL CLEAR 2.1 is a medium-solids, two-component urethane clearcoat with a 4:1 mix ratio. Designed for any size job, with three activators to choose from, this user-friendly clear is the “go to” clearcoat for productivity. It delivers great flow, gloss, and durability. Proper surface preparation is essential to achieve a high quality finish. Read the SDS sheet and wear proper protection, which may include gloves, eye protection, and/or other protective devices.

PART NO. DESCRIPTION 8021-01

4:1 Multi Purpose Clear, GA

8022-04

Multi Purpose Clear Activator, Fast, QT

8023-04

Multi Purpose Clear Activator, Medium, QT

8024-04

Multi Purpose Clear Activator, Slow, QT

8040-5

2.1 VOC Euro Clear 5L

8041-25

Euro Fast Activator 2.5L

8042-25

Euro Medium Activator 2.5L

8043-25

Euro Slow Activator 2.5L

CONTACT YOUR LOCAL REP

PRO PART PAGE 43

CART 3 SHELF MOBILE

- Heavy duty mesh shelves, offer stability and allows small parts to be stored - Strong solid steel edge/lip secures materials from sliding off - Heavy duty casters, including two with locks - All arms and shelves fold up to minimize storage space and allow vertical nesting - Powder coated steel - 33”W x 32.25”D x 65”H - Mesh shelves to retain small items, and perimeter PART NO. 1844 frame hold boxes in place CONTACT YOUR LOCAL REP - 4” Casters

WHITE MASKING PAPER

PART NO. 75012 (12” X 750’) PART NO. 75018 (18” X 750’) PART NO. 75036 (36” X 750’)

LIST $51.64

PAGE 44

PART NO. 6500

LIST $999.00

PART NO. 900

LIST $481.00

PART NO. DAQ-6

LIST $371.00

PAGE 45

Electronic Polisher Complete with 7" Hook-It Pad

- Voltage: 110V - Weight: 3 kg (7 lbs) - Speed: 0 - 3000 rpm PART NO. PE0808 - Amps: 11 LIST $126.11

PART NO. DESCRIPTION LIST

PART NO. DESCRIPTION LIST

2700P-11

PRESSURE SPRAY GUN 1.1MM

$125.04

4110GH-18

2700P-14

PRESSURE SPRAY GUN 1.4MM

$125.04

CUP AND REGULATOR $206.83

HVLP G/F PAINT GUN 1.3MM

$165.27

4000G

CANVAS WHEEL MASKER 4/PK

$21.37

HVLP G/F PAINT GUN 1.4MM

$165.27

6900

PAINT GUN CLEAN KIT 3 PC.

$4.40

HVLP G/F PAINT GUN 1.3MM

$178.81

6917

17 PC.PAINT GUN CLEAN KIT

$17.70

HVLP G/F PAINT GUN 1.4MM

$178.81

6922

22 PC.PAINT GUN CLEAN KIT

$35.06

4010GH-16

HVLP G/F PAINT GUN 1.6MM

$178.81

7440

AIR CONTROL UNIT-1 REGULATOR

$85.44

4010GH-18

HVLP G/F PAINT GUN 1.8MM

$178.81

7535CK

2-1/2G PRES. TANK SYSTEM

$700.72

4110GH-13

1.3MM HVLP G/F PAINT GUN KIT W/

SUCTION PAINT GUN 1.8

$61.70

1/4" NPT HVLP REGULATOR

$41.14

4000GH-13 4000GH-14

4010GH-13 4010GH-14

1.8MM HVLP G/F PAINT GUN KIT W/

7601

CUP AND REGULATOR $206.83

7645R

4110GH-14

7656

RUST PROOF GUN-1 LTR CUP

$116.79

90000

AIR PAINT SHAKER

$307.18

1.4MM HVLP G/F PAINT GUN KIT W/

CUP AND REGULATOR $206.83

PAGE 46

6” Dual Action Polisher - Orbital : 8mm - Adjustable speed: (0-3000r/min) - Speed without load : 3200 - 9600 rpm - Orbit rate without load : 160-480 rpm

- Weight : 5.75 lbs - Max. polishing pad diameter: 6” - Velcro pad: 150mm - Powerful machine for efficient work

- VR MCU for safe operation - Advanced vibration elimination PART NO. PE0909

LIST $322.06

PART NO. DESCRIPTION LIST

PART NO. DESCRIPTION LIST

9013

3 LBS DENT PULLER SET

$27.08

IR-15T

9016

10 LB. DENT PULLER SET

$117.55

MM-36

9021

16" WOOD SANDING BOARD

$22.42

MM-500-18

16" PLASTIC SANDING BOARD

$29.86

9031

5 IN RUBBER SANDING BLOCK

9032

PORT. INFRARED UNIT 120V

$290.55

36" PORTABLE MASK.MACHINE

$62.66

18" PORTABLE MASK MACHINE

$112.85

PB-2P

Heavy Duty Work Bench 400lbs.

$52.53

$7.28

PE0808

7" VERTICAL POLISHER ELEC

$126.11

9IN.PLASTIC SANDING BLOCK

$20.29

PE0909

6" Dual Action Polisher

$322.06

9098

AIR REGULATOR/SPRAY GUN

$7.64

PGSM-1M

MAGNETIC G/F GUN HOLDER

$17.02

9110

UNDERCOATING GUN

$35.65

PGSM-2

METAL STAND-G/F SPRAY GUN

$14.38

$11.45

PSS-1

PAINT SHAKER STAND

$93.00

BUMPER/HOOD/DOOR STAND

$233.20

TRT3001-1

$36.76

PRO-JET POCKET AIR DRYER $16.51

$60.46

9021P

9295W

BP-001

PINSTRIPE ERASER

CD-1

5 GALLON DISPENSER

CD-2

DUAL 5 GAL DISPENSER

VAN STAND 40"L 16"W 23"H

$150.68

PAGE 47

PAGE 48

PAGE 49

PART NO. DESCRIPTION LIST 133116 Pace Heavy Cut Compound 16oz $28.38 133216 Pace Medium Cut Compound 16oz $25.77 133316 Pace Ultimate Polish 16oz $24.83 133716 Pace Protective Glaze 16oz $17.69 810003 Flex 3” Dual Action Orbital Tool $344.44 890180 Gray Foam Heavy Cut 3” Pad $26.35 890184 Orange Foam Medium Cut 3” Pad $26.35 890185 Black Foam Polish 3” Pad $25.40 890186 Purple Foamed Wool 3” Pad $27.78 131730 Scuff Stuff Surface Prep 7.25lb. $58.00 131732 Scuff Stuff Surface Prep 28oz. $35.35

LIST $4.08 LIST $35.35 LIST $58.00

PAGE 50

POR-15 Hand Sanitizer

- Ethanol Alcohol Antiseptic 80%Topical Non-Sterile Handrub Solution. Formula supports hand hygiene and helps reduce bacteria that potentially can cause disease.

Made in the USA and meets CDC guidelines. If soap and water are not readily available, the Centers for Disease Control and Prevention (CDC) recommends consumers use an alcohol-based hand sanitizer that contains at least 60 percent alcohol (also referred to as ethanol or ethyl alcohol).

- Fast Drying 80% Alcohol Formula - Kills more than 99.99% of germs without running water - Helps reduce bacteria that potentially can cause disease - No water or towels needed, minimizing cross contamination - Formula meets CDC guidelines PART NO. 32056 - Can be used to refill small bottles

LIST $26.99

- Made in USA

PART NO. DESCRIPTION

LIST

PART NO. DESCRIPTION

LIST

40101 CLEANER/DEGREASER GA $24.83

45301

RUST PREVENTIVE PERMANENT COATING SILVER GA

P65-C

$175.66

40104 CLEANER/DEGREASER QT $12.30

45304

RUST PREVENTIVE PERMANENT COATING SILVER QT

P65-C

$53.57

40201 PREP AND READY GA $37.50

45308

RUST PREVENTIVE PERMANENT COATING SILVER PT

P65-C

$35.11

40204 PREP AND READY QT $18.56

45401

RUST PREVENTIVE COATING GLOSS BLACK GA

P65-C

$175.66

40909 STOP RUST KIT P65-C $23.34

45404

RUST PREVENTIVE COATING GLOSS BLACK QT

P65-C

$53.57

45001

RUST PREVENTIVE PERMANENT COATING BLACK GA

P65-C

$175.66

45408

RUST PREVENTIVE COATING GLOSS BLACK PT

P65-C

$35.11

45004

RUST PREVENTIVE PERMANENT COATING BLACK QT

P65-C

$53.57

45718

TOP COAT SAFETY CLEAR AEROSOL

P65-CR

$24.28

45006

GLOSS BLACK SIX PACK

P65-C

$60.25

45818

TOP COAT SAFETY GLOSS BLACK AEROSOL

P65-CR

$24.28

45008

RUST PREVENTIVE PERMANENT COATING BLACK PT

P65-C

$35.11

45918

TOP COAT SAFETY CHASSIS BLACK AEROSOL

P65-CR

$24.28

45104

RUST PREVENTIVE PERMANENT COATING CLEAR QT

P65-C

$53.57

46118

TOP COAT SAFETY RED AEROSOL

P65-CR

$24.28

45108

RUST PREVENTIVE PERMANENT COATING CLEAR PT

P65-C

$35.11

46618

TOP COAT GRAY AEROSOL

P65-CR

$24.28

45201

RUST PREVENTIVE PERMANENT COATING GRAY GA

P65-C

$175.66

46818

TOP COAT WHITE AEROSOL

P65-CR

$24.28

45204

RUST PREVENTIVE PERMANENT COATING GRAY QT

P65-C

$53.57

49701

POR15 OEM BEDLINER GA

P65-CR

$119.87

45208

RUST PREVENTIVE PERMANENT COATING GRAY PT

P65-C

$35.11

49704

POR15 OEM BEDLINER QT

P65-CR

$31.82

PAGE 51

PART NO. 760-WS

LIST $228.27

PART NO. 461

Keep Germs & Debris Away From The Interior Of Your Car! Promotes Zero Contact and a Cleaner Interior.

Protect you and others from germs while keeping dirt and debris away from the vehicle at the same time!

Five plastic coverst to protect: - Shifter - Driver Seat - Steering Wheel - Floor Mat - Parking Brake PART NO. 461

Alcohol wipes 100 presaturated wipes to disinfect & sanitize surfaces - 85% Isopropyl Alcohol - 15% DI Water - Disinfects & Sanitizes Viruses, Germs, Bacteria On Surfaces That Can Lead to Illness - Industrial Strong. Gentle To The Touch - Perfect for Home, Office, Shops, Cars, Dorms, Gyms, Bathrooms, Restaurants, etc.

PART NO. 19P-150 PART NO. 19S-150 Alcohol Wipes Pouch 100pk Alcohol Wipes 100ct 6”x9”

LIST $50.67

LIST $45.14

PART NO. DESCRIPTION LIST 22003 21MM Big Orbit Cordless Polisher $367.56 428 Collision Wrap 36"x100' LOG $100.11 5-350B 3.5” Orange & Black Buff Pad $6.97 5-35YB 3.5” Yellow & Black Buff Pad $6.97 5-60B 6” Orange & Black Buff Pad $15.35 5-80B 8” Orange & Black Buff Pad $18.43 760-WS Tacky Net Starter Kit White $228.27 HH-1 Color Matching Light $124.95

PAGE 52

READING TECHNOLOGIES, INC. AUTOMOTIVE REFINISH PRODUCT LINE

PART NO.

DESCRIPTION

LIST

EH4000-3R

Eliminator® II

$802.20

EH7000-3R

3 Stage Desiccant Dryer

$967.80

ED2-4

Electronic Drain

$171.40

6060

Stealth Series 6060

$474.70

6950

Stealth Series 6950

$195.90

HFFC-1

FEM.1/4NPT HI-FLO Coupler

$11.60

HFFP-1

FEM.1/4NPT HI-FLO Nipple

HFMP-1

Male 1/4NPT HIFLO Nipple

PERF-50

Perfect Air

$2.30 $2.30

$3,303.70

TuffCoat™

Benefits to Customer: - Excellent impact resistance - Good abrasion resistance - Excellent corrosion resistance - Very good chemical resistance - Reduces noise from vibration and impact - Economical solution - Black or custom dark colors available with UV top coat

Typical Applications:

- Truck beds, floor boards, wheel wells, rocker panels, etc…

- Landscaping and pool vehicles (excellent chemical protection) - Commercial vehicles - Digesters and clarifiers PART NO. RPCS-001 (TUFFCOAT)

LIST $51.36

PART NO. RPCS-002 (CARTRIDGE GUN)

LIST $399.00

Aerosol Pure Air

Uses: - Cleans and disinfects the air conditioning system.

- Eliminates odors caused by fungi and bacteria.

Benefits: - Effective against a broad spectrum of bacteria, yeasts, fungi, algae, and viruses, including the Coronavirus.

- One-step application.

PART NO. DI - Composition and Properties: Alcohols, quaternary ammonium salts, water, fragrances, biocide, dimethyl ether.

LIST $22.95

PAGE 53

Tork Paper Wiper is a multipurpose wiper designed for light wiping tasks.

The Tork Paper Wiper is good choice when economy matters most.

PART NO. 130211

LIST $73.37

Tork Industrial Paper Wipers are a multipurpose wipers that are ideal for janitorial, industrial, and hand wiping.

PART NO. 132441

LIST $71.42

Tork Paper Wiper Plus This wiper can be used in the Tork® Maxi Centerfeed dispenser, which is a high capacity versatile solution for professional environments where both hand and surface wiping is required.

PART NO. 192128

PART NO. 192475

The multipurpose Tork Heavy-Duty Cleaning Cloth is highly absorbent, thick and very durable, withstanding hard scrubbing without falling apart.

LIST $61.81

Tork Low-Lint Cleaning Cloth is a soft yet durable wiper and is perfect for surface preparation and cleaning.

Tork Heavy-Duty Paper Wiper is our toughest multipurpose industrial wiper.

Tork Advanced ShopMax Wiper 450 Centerfeed (refill) is a solid all purpose paper wiper that features cloth like softness.

PART NO. 192479

PART NO. 450175

PART NO. 450338

LIST $27.62

LIST $108.50

PART NO. DESCRIPTION

LIST 3680031 2K Rapid Primer Filler Gray $27.66 3680032 2K Epoxy Rust Cure Primer $26.87 3680058 1K Clearcoat $14.01 3680061 2K Glam Hi Gloss Clearcoat $26.26 3680080 2K Fill Clean Aerosol 6/CS $131.04 3680093 1K Spot Blender Aerosol $14.59 3680102 Satin Black Trim Paint $15.32 3682071 1K Empty Fill Can (6/CS) Version 1 $70.86 3684064 2K Rapid Clear 250ML Aerosol $23.32 3680033 2K Epoxy Primer Gray $26.87 3680034 2K Epoxy Primer Black $26.87 3684262 2K DTS Filler Primer $26.02 3680230 1K E-Coat - White $18.23 3680231 1K E-Coat - Light Green $18.23 3680232 1K E-Coat - Olive Green $18.23 3680233 1K E-Coat - Gray $18.23 3680234 1K E-Coat - Black $18.23 3680235 1K E-Coat - Tan $18.23

LIST $38.89

Tork Low-Lint Cleaning Cloth is a soft yet durable wiper and is perfect for surface preparation and cleaning prior to painting.

LIST $142.54

PART NO. 530178

LIST $38.89

PAGE 54 Value-Touch Latex Disposable Glove (Powdered or Powder-Free) Dyna Grip Latex Disposable Glove (Powder-Free)

- 100 gloves per box - Thickness: 7mil - Powder-free exam grade latex - Beaded cuff for easy on/off PART NO. 650-1001 - Small 650-1002 - Medium

650-1003 - Large 650-1004 - XLarge 650-1005 - XXLarge

Derma-Lite®

- Powdered nitrile or powder-free exam grade nitrile - Thickness: 5 mil - Non-latex - Extraordinary strength and puncture resistance PART NO. 6606 - Small 6608 - Large 6607 - Medium 6609 - XLarge

Astro-Grip®

- Powder-free exam grade nitrile - Thickness: 7 mil - Dual-sided scale textured surface for superior grip - Non-latex PART NO. 66572 - Medium 66573 - Large

- 100 gloves per box - Thickness: 5mil - Powdered latex - Stretches and conforms for superior fit and feel - Excellent touch sensitivity - Textured for enhanced dexterity - Economical latex protection PART NO. 6592 - Medium 6593 - Large

6594 - XLarge

Derma-Vue®

- Powder-free exam grade nitrile - Thickness: 6 mil - Non-latex - High visibility green color - Outstanding strength, wear and dexterity - Fully textured for enhanced gripping power PART NO. 66551 - Medium 66553 - XLarge 66552 - Large 66554- XXLarge

Standard Goggles

- Impact resistant polycarbonate lens - 99.9% UV protection - Scratch resistant coating - Flexible PVC construction - Economical eye protection PART NO. 5101

Raven®

- Powder-free exam grade nitrile - Thickness: 6 mil - Non-latex - Outstanding strength, wear and dexterity - Textured for enhanced gripping power PART NO. 66517 - Medium 66518 - Large

66519 - XLarge

Deluxe Goggles

- Impact resistant polycarbonate lens - 99.9% UV protection - Anti-fog coating on lens - Anti-splash: special vents prevent liquid from getting into eyes - Sport-style design with wide elastic headstrap

Deluxe Face Shield

Disposable Dual Cartridge Respirator

- Impact-resistant polycarbonate shield for long lasting protection - Aspherical lens design provides larger area to protect your face - Large spark deflection - Push and turn ratchetsizing adjustment - Tension dials increase and decrease tension of shield placement

- Pre-assembled respirator eliminates cartridge and filter attachment hassles - Face piece is constructed with comfortable, lightweight TPR material for flexibility, comfort and secure fit - Cradle suspension and easy to adjust head strap - Low profile cartridge placement is designed for a better field of vision and balance for the wearer - Packaged in resealable bag to keep respirator clean during non-usage PART NO. 8661-92 (MEDIUM) PART NO. 8661-93 (LARGE)

- Lightweight, maintenancefree construction - Adjustable nose bridge with foam strip - Latex-free stapled fixed head strap - Quantity: 20 masks per box PART NO. 8661-22 (10/BOX)

- 50 gloves per box - Thickness: 14mil - Powdered latex or powder-free exam grade latex - 12″ length for added protection - Beaded cuff for easy donning - Textured for superior grip - Strong yet soft and flexible PART NO. 6604 - XLarge 6602 - Medium 6605 - XXLarge 6603 - Large

PART NO. 5103 PART NO.5106 GLOGGLES BLACK FRAME DELUXE OVERSPRAY GOGGLE

66574 - XLarge 66575 - XXLarge

N95 PARTICULATE RESPIRATOR

Thickster Latex Disposable Glove (Powdered or Powder-Free)

PART NO. 5145

N95 PARTICULATE RESPIRATOR

- Lightweight, maintenance-free construction - Adjustable nose bridge with foam strip - Latex-free stapled fixed head strap - Quantity: 20 masks per box PART NO. 8610 (20/BOX)

N95 VALVED PARTICULATE RESPIRATOR - Exhalation valve reduces hot air build up - Adjustable nose bridge with foam strip - Latex-free stapled fixed head strap - Quantity: 10 masks per box PART NO. 8611 (10/BOX)

CONTACT YOUR LOCAL REP

PAGE 55

Standard Hood

• Complete fabric hood • Complete head coverage • 40025 Lens 5" x 6" • Rear breather vents • 40024 Internal bump cap PART NO. 40019

LIST $36.17

Allsource Standard Hood w/Bump Cap

• Complete fabric hood • Complete head coverage • 40025 Lens 5" x 6" • Rear breather vents • 40024 Internal bump cap PART NO. 40024

LIST $47.03

Allsource

Portable Sandblast Kit

• Use abrasives or liquids • Hose length – 10’ • Unlimited capacity • 7 CFM @ 80psi minimum • 1/4” steel nozzle

Abrasive Blast Kit

• Self recycling – dust free • One pound of abrasive included • 5/16” steel nozzle • Optional head accessories available PART NO. 4001344

Hand Held Blaster • Handheld unit • Self recycling - Dust free • One pound of abrasive included • 20 CFM@80 psi PART NO. 40013

LIST $88.11

LIST $143.98

Allsource 100# Pressure Blaster

• Large steel deadman handle • Uses large Type 1 nozzle • 1/2” plumbing assembly • 8’–1/2” pressure hose • Pneumatic wheels • Sturdy front leg support • Pressure release valve

ABRASIVES

1 LB.

4 LB.

25 LB.

ALC MIX #1 - MEDIUM

40090

40091

40092

BLACK BEAUTY - MEDIUM ALUMINUM OXIDE - FINE

40094

40093 40097

40100

ALUMINUM OXIDE - MEDIUM ALUMINUM OXIDE - COARSE

40095 40096

40098 40099

40101 40102

GLASS BEAD - MEDIUM GLASS BEAD - COARSE STEEL GRIT - MEDIUM PLASTIC GRIT - MEDIUM WALNUT SHELLS

40103 40104

40105 40106 40109 40110

40107 40108

41110* 40112*

CORN COB

*Abrasive Chart * = 10lbs.

PART NO. 4001544

PART NO. 41600

1/8” Double End Stubby Drill Bits

3/8” Keysco Spot Weld Cutters

The Monkey on a Stick

PART NO. 77395

PART NO. 77776

PART NO. 77043

The Keysco Hustler Stick

5/16” Keysco Spot Weld Cutter

Mobile Masker

LIST $32.35

• 12 bits per tube • 1/8” • Titanium coated • Gold in color

LIST $16.93 • Indispensable when versatility of a chain hookup is needed PART NO. 77175

LIST $202.47

Dual Piston Air File

• 2,400 SPM • 4 CFM • 1/4” NPT Air Inlet • 90-100 PSI Required PART NO. 100

LIST $308.17

50 LB.

LIST $457.14

• High Speed Steel (M2) • Use in either an electric or pneumatic drill • Operates at speeds up to 2,000 rpm

LIST $28.32

• Four-piece jack set • A must for every body shop since 1929

LIST $172.68

• High Speed Steel • High Speed Steel (M2) PART NO. 77775

• Masker holds two rolls of 18” paper and two rolls PART NO. 78007

Two-Way Wonder Gun Vacuum & Blower Kit

Kit Includes: • Swivel stand • 2 Air Amplifiers • Base stand • Coiled air hose PART NO. VT9805 (AIR BLOWER GUN) WATERBORNE PRODUCT!

LIST $28.73

• Accelerates the drying of painted surfaces • Corrosion resistant polished chrome • Waterborne approved.

• Shorter booth times • Rotates 360º • Lower investment costs • Simple to use • Universal application • Portable design • 1 year warranty

LIST $287.98

LIST $98.88

PART NO. VT9804 (AIR BLOWER KIT - 2 GUNS) WATERBORNE PRODUCT!

LIST $439.72

40125

PAGE 56

SATA®Special Edition Spray Gun 2020 Beginning October 12 – while supplies last

SATAjet X 5500 Bionic – Below the surface!

SATA spray guns do not only inspire with their stunning aesthetics, they deliver with their cutting-edge engineering.

The inner workings of a SATA spray gun is something that many wish to see – and now you can!

The SATAjet X 5500 Bionic reveals the unseen technology that makes your SATA spray gun so special.

The special edition spray gun SATAjet X 5500 Bionic is fully functional and suitable for the daily use in the spray booth. Reserve your Special Edition spray gun with your SATA dealer now! www.sata.com/bionic I-nozzle

O-nozzle RP

Nozzle size

1.2 I

1.3 I

1.4 I

1.2 O

1.3 O

1.4 O

Standard with one each RPS multipurpose cup 0.6 l / 0.9 l, with swivel joint Part No.

1112078

1112086

–

1112119

1112127

–

1.3 O

1.4 O

HVLP

Nozzle size

1.2 I

1.3 I

1.4 I

1.2 O

Standard with one each RPS multipurpose cup 0.6 l / 0.9 l, with swivel joint Part No.

–

1112317

1112325

–

1112367

1112375

The exclusive independent distributor of SATA products in the US and Puerto Rico

Be Strong www.satausa.com

SATA, SATAjet and/or other SATA products referenced herein are either registered trademarks or trademarks of SATA GmbH & Co. KG in the U.S. and/or other countries.

PAGE 57

SATA® Summer Promo

Going on NOW - while supplies last Be precise!

The SATAjet 1500 B SoLV provides fine finishes with cost saving transfer efficiency and is designed for Full System Application: solvent-based basecoats, either Low VOC or National Rule as well as sealer and clearcoat.

Precise! The SATA high quality air micrometer indicates precise air pressure settings at the spray gun air inlet and is adjustable from 0 – 145 psi.

With the purchase of each SATAjet 1500 B SoLV HVLP or RP, the SATA air micrometer comes in the specially marked summer promo gun box from your local SATA dealer - available now while supplies last.

Available in the USA only.

SATAjet®1500 B SoLV promo part numbers Nozzle size

Standard with RPS cups 0.3 l, 0.6 l, 0.9 l, 1 ea.

HVLP RP

1.3 1.3

1.4 1.4

1109041 1109033 1109067 1109059

List SALE

771 $ 699 $

RP version is approved for SCAQMD and EPA.

Stay safe and healthy Further information: www.sata.com/SATAjet1500

The exclusive independent distributor of SATA products in the US and Puerto Rico

www.satausa.com

SATA, SATAjet and/or other SATA products referenced herein are either registered trademarks or trademarks of SATA GmbH & Co. KG in the U.S. and/or other countries.

PAGE 58

SATA®air vision 5000 System TM

Supplied air respirator is independent from booth atmosphere – for ultimate safety, comfort and perfection.

Whatever environment you are working in: Whether you want cooled, heated or re-humidified breathing air or simply looking for absolute safety from particle contamination – with the new add-on modules complementing the SATA air vision 5000 breathing protection system, you can be sure that your health and comfort are both efficiently catered to.

www.sata.com/SATAairvision5000

The NIOSH approval number is TC-19C-0533

The exclusive independent distributor of SATA products in the US and Puerto Rico

Stay healthy www.satausa.com

SATA, SATAjet and/or other SATA products referenced herein are either registered trademarks or trademarks of SATA GmbH & Co. KG in the U.S. and/or other countries.

PAGE 59

AUTOMOTIVE DIVISION REPAIR & REFINISHING

Two-component, urethane, texture coating for reproducing a variety of OE textures and chip guards

SHAKE. SHOOT. DONE. Two-component system eliminates common one-component problems such as long flash times, pinholes, solvent trap, delamination and solubility • OEM recommended • 2K durability with 1K convenience • Reproduces fine to coarse and light to heavy OE textures • Builds heavy textures without trapping solvent • No flash time required between coats • 50 state compliant • Pinhole free • Easy to use shake-and-shoot system • 16 defined textures with detailed instructions • R.O. billable unit • Non-yellowing and non-staining • Tintable, paintable or can be used as a textured top coat • Impact and chemical resistant • Excellent for sound dampening Part No. Product Size 52000 2K Urethane Chip Guard Kit 71103 2K Urethane Chip Guard Applicator KIT CONTAINS: 1 – 52008 Chip Guard 8 oz. filled pint

1 – 52004 Activator 4 oz.

semproducts.com

WATCH AND LEARN Watch our SEM School style video to learn about masking and duplicating textures with 2K Urethane Chip Guard.

Learn more about the 2K Urethane Chip Guard and watch the training at: semproducts.com/chip-guard-demo

WATCH THE ENTIRE SERIES AT: www.semproducts.com/training-series

PAGE 60

AUTOMOTIVE DIVISION REPAIR & REFINISHING

SPECIALTY ADHESIVE REMOVERS NEW

FIRST GEL ADHESIVE REMOVER FOR THE AUTOMOTIVE MARKET

XXX SPECIALTY GEL ADHESIVE REMOVER A solvent-based gel for removing adhesive residue as well as tar, sap, silicone, grease and oil from interior and exterior surfaces.

• Unique gel improves efficiency and eliminates waste • 50 state compliant • Slow evaporating formula • Run resistant gel stays where you spray it • Available in 20 oz. aerosol Part No. Product Size 77793 XXX Specialty Gel Adhesive Remover 20 oz. Aerosol

IMPROVED

XXX SPECIALTY ADHESIVE REMOVER A solvent blend for removing adhesive residue as well as tar, sap, silicone, grease and oil from interior and exterior surfaces.

• Quick acting formula • 50 state compliant • Available in 20 oz. aerosol or quart cans Part No. Product 77783 XXX Specialty Adhesive Remover 77784 XXX Specialty Adhesive Remover

semproducts.com

Size 20 oz. Aerosol Quart

PAGE 61

AUTOMOTIVE DIVISION REPAIR & REFINISHING

ADHESIVES

PLASTIC REPAIR

SEALERS

SOUND DAMPENING

Bumper to bumper. Roof to rockers.

FOREVER WARRANTIED.* *Visit semproducts.com/warranty for complete DUAL-MIX warranty information.

Part No. 39337 39357 39377 39387 39477 39537 39747 39757 39767 39777 39847 39897 39977 39997 40177 40202 40207 40277 40377 40477 40502 40507 40517 40887 40977 41807

Product DUAL-MIX Door Skin & SMC Adhesive DUAL-MIX Flexible Urethane Foam DUAL-MIX Medium Bodied Seam Sealer – Gray DUAL-MIX Self Leveling Seam Sealer DUAL-MIX Medium Bodied Seam Sealer – Beige DUAL-MIX Weld-Bond Adhesive DUAL-MIX Multi-Purpose Panel Adhesive DUAL-MIX Structural Impact Resistant Adhesive DUAL-MIX Problem Plastic Repair Material DUAL-MIX High-Build Self Leveling Seam Sealer DUAL-MIX Multi-Plastic Repair Material DUAL-MIX Patch Panel Adhesive DUAL-MIX Panel Vibration Control Material DUAL-MIX Rigid Urethane Foam DUAL-MIX Heavy Bodied Seam Sealer – Gray DUAL-MIX Quick Set 20 DUAL-MIX Quick Set 20 DUAL-MIX Heavy Bodied Seam Sealer – Beige DUAL-MIX Heavy Bodied Seam Sealer – Black DUAL-MIX Heavy Bodied Seam Sealer – White DUAL-MIX Quick Set 50 – Black DUAL-MIX Quick Set 50 – Black DUAL-MIX Quick Set 50 – Clear DUAL-MIX Rigid Plastic Repair Material DUAL-MIX Sound & Seal Sprayable Coating DUAL-MIX Quick Set 180

semproducts.com

Size 7 oz. Cartridge 7 oz. Cartridge 7 oz. Cartridge 7 oz. Cartridge 7 oz. Cartridge 7 oz. Cartridge 7 oz. Cartridge 7 oz. Cartridge 7 oz. Cartridge 7 oz. Cartridge 7 oz. Cartridge 7 oz. Cartridge 7 oz. Cartridge 7 oz. Cartridge 7 oz. Cartridge 1.7 oz. Cartridge 7 oz. Cartridge 7 oz. Cartridge 7 oz. Cartridge 7 oz. Cartridge 1.7 oz. Cartridge 7 oz. Cartridge 7 oz. Cartridge 7 oz. Cartridge 7 oz. Cartridge 7 oz. Cartridge

WATCH AND LEARN Watch 3 DUAL-MIX SEM School style videos at semproducts.com/training-series.

Episode 2: 2K Seam Sealer Episode 3: Equalize and Purge 2K Cartridges Episode 4: 2K Cartridge Times Explained

WATCH THE ENTIRE SERIES AT:

semproducts.com/training-series

PAGE 62

AUTOMOTIVE DIVISION REPAIR & REFINISHING

PLASTIC MASKING FILM

NEW

A paintable plastic masking film that clings to substrates for protection against overspray and other contaminants.

EXTREME BLUE PLASTIC MASKING FILM

TRANSPARENT PLASTIC MASKING FILM Part No. Product 91161 Transparent Plastic Masking Film

91201

Size 16 x 350

Transparent Plastic Masking Film 20 x 350

• Transparent film for accurate trimming • Paintable • Treated for top coat adhesion • Clings to substrate

semproducts.com

Part No. Product 91162 Extreme Blue Plastic Masking Film

91202

Size 16 x 350

Extreme Blue Plastic Masking Film 20 x 350

• Transparent blue • Multi-layer film for tear resistance • Exceptional adhesion of waterborne and solvent coatings • Specialty treatment for top coat adhesion • Clings to substrate • Solvent resistant and prevents bleed-through

PAGE 63

Heavy Duty Caulking Gun

• Push rod design quickly and easily dispenses a smooth flow of sealants and compounds from 1/10 gallon cartridges.

PART NO. 19300

LIST $13.31

Titanium Multi-Step Drill Bit • For sheet metal and other thin materials up to 1/8" thick PART NO. 15060

LIST $32.59

Spray Gun Cleaning Kit

The Slugger Heavy Duty

Reciprocating Air Saw Blade

LIST $297.78

LIST $16.23

5 Gallon Drum Pump

Windshield Removal Tool

Assortment (Pkg of 5) Assortment contains one each of our Cat. Slide Hammer - 10 lb. slide weight designed for in-line impact and Nos.: 90000, 90010, 90020, 90030 and 90040 packed per display pouch. balanced for continued use without fatigue.

PART NO. 81000 PART NO. 90040

• Fits all 5 and 6 gallon pails • Easily dispenses fluid with lift action PART NO. 17500

LIST $33.76

1/8” Double End Drill Bits

PART NO. 17280

• 135° split points for fast drilling without center punching. (Pack of 10) PART NO. 15210 (PACK OF 10)

Rotary Barrel Pump

Door Spring Tool

• Kits contains all necessary brushes and tools to effectively clean spray guns including HVLP paint spray guns.

LIST $11.65

• Fits 15, 30 & 55 gallon drums with 2” bung opening • Dispenses approx. 8 gallons per 100 revolutions PART NO. 17580

LIST $167.81

15/30/55 Gallon Drum Pump

• Use to transfer petroleum based fluids such as lubricants, anti-freeze, solvents, thinner and other non-corrosive liquids PART NO. 17550

LIST $50.13

LIST $9.32

• Use to remove and install the door hinge springs found on late model General Motors cars and light trucks PART NO. 87675

LIST $24.71 Braided Windshield Wire

• Braided design provides the fastest cutting action possible PART NO. 87425

LIST $14.42

• Use to remove windshields, backlights and bonded backlights.

PART NO. 87900

LIST $22.75 3/8” Spot Weld Cutter

• Quickly removes spot welds holding sheet metal.

PART NO. 18000

LIST $19.56

Air Regulator w/Gauge

• Allows for fine regulation of air entering spray gun PART NO. 98300

LIST $18.15 Inline Blow Gun

LIST $21.25

Quickly remove fender flares and rocker moldings without breaking any clips.

Save time removing fender flares and rocker moldings by releasing retainer clips from the outside. No more broken clips or wasted time accessing and releasing clips from the inside.

- Slides between molding and panel to access expansion ears and release clip from the outside.

PART NO. 21715 - Spring steel design provides flexibility to reach tight areas and strength to release clip.

- The wide opening allows the tool to release all types of retainer clips.

LIST $25.00 The AI Skin Zipper is an air hammer driven door skinning tool with a wider opening for any 1-millimeter aluminum skin and 1.5-millimeter door shell.

Attach a new aluminum door skin with rope hem in approximately 15 minutes.

Aluminum skins are prone to cracking but the AI Skin Zipper prevents cracking from happening because it produces a rope hem. When completed, minimal finishing may be required on the PART NO. 21892 corners and body lines.

ALUMINUM DOOR The AI Skin Zipper reduces technician arm fatigue from hammer and dolly method. It also allows the technician time to skin the door before the two-part bonding agent has set. The self- SKIN TOOL lubricating head will skin approximately 10 doors and is easy to replace when it wears out.

LIST $38.00

21970 SPR Extraction Tool

No need for expensive hydraulic tools to remove and insert self-piercing rivets.

Steck’s new SPR Extraction Tool is a high-grade, hardened steel frame, that uses a 1/2” 20 grade 8 hex bolt, with hardened tip, to easily push out a SPR with your 3/4” or 19mm socket using your 1/2” impact wrench.

The SPR Extraction Tool allows the technician to control the repair process without waiting in line for the very expensive hydraulic tools to do the same process PART NO. 21970 SPR EXTRACTION TOOL

LIST $125.00

LIST $32.55

• Mounts permanently in line between air hose and coupler - no need to keep on disconnecting an air tool to hook up a blow gun.

PART NO. 99190

21715 Retainer Clip Release Tool

21892 Aluminum Skin Zipper

PART NO. 19400 RIVET TOOL PLASTIC RIVETS

PAGE 64

PART NO. DESCRIPTION LIST 81874

Cupran® Special Paint Remover for Hands, 2000 mL Softbottle®

$41.50

83311

Estesol® LD Hand Cleaner, 2000 mL Softbottle®

$15.53

87044

Kresto® Hand Cleaner, 2000 mL One-Pump® Cartridge

$30.13

87045

Kresto® Heavy Duty Hand Cleaner, 2000 mL Softbottle®

$29.64

KCL250ML Kresto Classic 250ML Tube $6.53 KGTC2L

KrestoGT Cherry Turbo 2L Cartridge

$27.74

HVY2LKGT 2L Wall Dispenser $7.14 KGTC72W

KrestoGT Cherry Scurbbing Wipes 70 count

$17.49

PAGE 65

PART NO. DESCRIPTION LIST 90601 3” Ceramic Quick Change Disc, 24G $48.12 90602 3” Ceramic Quick Change Disc, 36G $44.34 90604 3” Ceramic Quick Change Disc, 50G $41.12 90606 3” Ceramic Quick Change Disc, 80G $41.12

PART NO. DESCRIPTION LIST 90701 2” Ceramic Quick Change Disc, 24G $40.57 90702 2” Ceramic Quick Change Disc, 36G $38.47 90704 2” Ceramic Quick Change Disc, 50G $36.50 90706 2” Ceramic Quick Change Disc, 80G $34.96

PART NO. DESCRIPTION LIST 82206 Sun Net 6” 80G Grip Discs $45.52 82210 Sun Net 6” 180G Grip Discs $39.30 82212 Sun Net 6” 240G Grip Discs $39.30 82214 Sun Net 6” 320G Grip Discs $39.30 82216 Sun Net 6” 400G Grip Discs $39.30

PART NO. DESCRIPTION LIST 82218 Sun Net 6” 600G Grip Discs $39.30 82906 Sun Net 3” 80G Grip Discs $23.41 82910 Sun Net 3” 180G Grip Discs $20.90 82914 Sun Net 3” 320G Grip Discs $20.90

PART NO. DESCRIPTION LIST 80100 6” x 9” Scuff Pads Maroon 20/box $25.68 80200 6” x 9” Scuff Pads Gray 20/box $25.68 80500 4.5” x 9” Flex Scuff Pads Maroon 25/box $24.93 80600 4.5” x 9” Flex Scuff Pads Gray 25/box $24.93

PAGE 66

PART NO. WM-902

Shop Ticket Holder-Black Trim

with Strap and Grommet - Helps your shop or work place from losing papers - Perfect for your inventory control system PART NO. 41-922

LIST $73.00

5 Level Brush - Green

Ideal for washing vehicles, boats and other surfaces.

Bristles wrap around the brush block to protect from bumping and damaging the surface.

PART NO. 83-044

PART NO. 41-922

Sno-Pro® Snow Broom

- Designed to endure harsh condition and hundreds of vehicle clearings - Approved for use on “Class A” finishes and received the highest ratings possible from an independent testing lab for non-abrasiveness, freeze resistance and durability PART NO. WM-902

Speedy Surface Prep

Removes industrial pollutants, bonded contaminants, paint overspray and brake dust from the surface of automotive paint, glass, moldings, fiberglass and plastic.

LIST $35.76

Surface Prep Mitt

PART NO. SSP-580 FINE GRADE

Removes industrial pollutants, bonded contaminants, paint overspray & brake dust from the surface of automotive paint, glass, moldings, fiberglass & plastic.

PART NO. SSP-576

LIST $70.63

PART NO. SSP-589 MEDIUM GRADE

LIST $68.79

12” One Pass Superflex Waterblade

LIST $71.37

60” Wood Handle Threaded PART NO. 85-675

LIST $9.97

PART NO. 25-618

LIST $6.45

11” One Pass Soft-N-Dry Waterblade

7” Velocity DX Foam Pad Blue - Heavy Cutting Pad

LIST $17.22

LIST $16.90

Soft, wax treated cotton fibers collect dust from car dash, console and cargo areas. Safe for all surfaces.

PART NO. 25-617

Plastic Multi-Scraper

• One Pass Patented T-Bar edge whisks away water • Soft Medical Grade Silicone Blade will not scratch PART NO. 25-925

Soft, wax treated cotton fibers collect dust from cars, trucks, RV’s and boats.

Safe for all surfaces.

12” Dash Duster

• One Pass Patented T-Bar edge whisks away water • Soft Medical Grade Silicone Blade will not scratch PART NO. 25-923

LIST $33.52

24” Large Car Duster

LIST $36.94

Versatile multi-purpose plastic scraper to assist with removing tar, road paint and stubborn tree sap.

PART NO. RZ-020

LIST $6.24

• SM ARNOLD VELOCITY DX™ 7” Fits 5 3/8” backing plate • For Heavy surface defects and swirls.

PART NO. 49-017

LIST $12.40

PART NO. DESCRIPTION 28031 Spray Suit Ultra Medium 28032 Spray Suit Ultra Large 28033 Spray Suit Ultra XL 28034 Spray Suit Ultra XXL 28041 Spray Suit Nylon Medium 28042 Spray Suit Nylon Large 28043 Spray Suit Nylon XL 28044 Spray Suit Nylon XXL 84075 One Tuff Wipe Cloths 75/pk.

LIST $38.65 $38.65 $38.65 $38.65 $17.41 $17.41 $17.41 $17.41 $16.52

PAGE 67

Paragon contains 70% isopropyl alcohol and meets the U.S. Centers for Disease Control and Protection guidelines for disinfecting with an alcohol solution.

PART NO. 9804 (QUART) LIST $16.12 PART NO. 9806 (4OZ.) LIST $9.64

PART NO. DESCRIPTION LIST 4603

20oz Aerosol 2 in 1 Primer-Gray

$21.89

4613

20oz Aerosol 2 in 1 Primer-Black

$21.89

4623

20oz Aerosol 2 in 1 Primer-Red

$21.89

4633

20oz Aerosol 2 in 1 Primer-White

$21.89

4900-01

Urethane Clearcoat TRUE FINISH - Gallon

$84.28

5901-04 Spot/Panel Hardener, QT $50.47 5902-04 True Finish Hardener,QT $50.47 6841

Kwik Gloss Clearcoat, GA

$147.69

6874 Spot/Panel Activator, QT $67.81 6894 Overall Activator, QT $68.52 7021

Euro Class Clearcoat, 5L

$192.65

7086

Euro Class Activator, Fast, 2.5L

$169.96

7096

Euro Class Activator, Slow, 2.5L

$169.96

7211

Euro Kwik Clearcoat - 5 Liter

$190.80

7226

Euro Kwik FAST Activator - 2.5 Liter

$170.78

7236

Euro Kwik SLOW Activator - 2.5 Liter

$170.78

9404 Clearcoat Activator, Fast $70.17 9414

Clearcoat Activator, Medium

$70.17

9424 Clearcoat Activator, Slow $73.61 9451 Speed Clearcoat, GA $183.63 9461 Glamour Clearcoat, GA $220.89 9471 Speed Primer, GA $218.31 9484

Speed Primer Activator, QT

$77.80

9521

Low VOC Sealer White, GA

$178.56

PAGE 68

PART NO.

DESCRIPTION

LIST

11030 Multi-Purp Razor Scraper $8.88 15048 6PC Multi-Wedge Trim Panel Tool $14.20 15084 7PC Autobody Hammer Set $70.53 19000 1.4mm HVLP G/F Spray Gun $79.46 19018 1.8mm HVLP G/F Spray Gun $79.46 19220 4PC HVLP Spray Gun Kit – Tripple Setup $191.07 19225

6" Orbital Sander $115.17 19419 Red Spot Spray Sprayer $55.89 19424 Blue Spot Spray Sprayer $55.89 19951 17" X 2-3/4" Flexible Foam Sanding Block $32.00 22400 Heat Gun $32.11 22530 7” Polisher/Sander (11 AMP) $207.14 51482 Non-Contact Infrared Thermometer $43.75

Spot Spray Non-Aerosol Sprayer • Not for use with paint products • Eco friendly • Maximum capacity 32oz.

PART NO. 19419 PART NO. 19426 RED SPRAYER BLUE SPRAYER

LIST $55.89

LIST $55.89

PAGE 69

PART NO. DESCRIPTION LIST 0657 Dolphin 1K Combination Putty, 200G P65-C $13.34 0659 Dolphin ONE FILL .8GA P65-C $77.53 0660 Dolphin ONE FILL QT P65-C $26.93 0670 Liquid Gold Pourable Glazing Putty 615ml P65-C $25.74 0700 Fiberal Lite Gallon P65-R $64.76 0711 Flyweight Body Filler P65-C CONTACT YOUR LOCAL REP 0745 Flyweight Gold Gallon P65-C CONTACT YOUR LOCAL REP 0820 Raptor Truck Bed Liner Black P65-C $210.69 0821 Raptor Truck Bed Liner Tintable P65-C $210.69 0796 Clear #1 High Gloss Clear Coat P65-R $20.61 0768 Weld #2 through Primer Copper P65-C $39.81 0789 Weld #2 through Primer Zinc P65-R $36.19 0870 Spot #3 Universal Spot Primer P65-R $20.61 0799 Grip #4 Universal Adhesion Promoter P65-R $20.61 0871 High #5 High Build Primer Black P65-C $20.61 0872 Wipe #6 Solvent Based Degreaser $12.29 0873 Guide #7 Dry Guide Coat P65-CR $12.29 0837 Acid #8 Black Etched Primer P65-C $20.61 0874 Blend #9 Fade Out Reducer $12.29 0875 Guard #10 Gravi-Gard Stone Chip Protector P65-CR $20.61 0878 Trim #11 Satin Black Top Coat P65-CR $16.51 0890 E-Coat #12 Black, 450ml P65-C $25.39 0891 E-Coat #12 Gray, 450ml P65-C $25.39 0892 E-Coat #12 Light Green, 450ml P65-C $25.39 0893 E-Coat #12 Beige, 450ml P65-C $25.39 0894 E-Coat #12 Olive Green, 450ml P65-C $25.39 4807 Raptor Truck Bed Liner White P65-C $222.25 4842 Raptor Anti-Corrosive Epoxy Primer - Beige CONTACT YOUR LOCAL REP 4883 Raptor 2K Aerosol Black Aerosol CONTACT YOUR LOCAL REP 4884 Raptor 2K Basalt Gray Aerosol CONTACT YOUR LOCAL REP 4885 Raptor 2K White Aerosol CONTACT YOUR LOCAL REP 4886 Raptor 2K Flame Red Aerosol CONTACT YOUR LOCAL REP 4887 Raptor 2K Olive Green Aerosol CONTACT YOUR LOCAL REP 4888 Raptor 2K Sepia Brown CONTACT YOUR LOCAL REP 4889 Raptor 2K Blue Aerosol CONTACT YOUR LOCAL REP 0726 Raptor Standard Application Gun $39.73 4830 Raptor 4:1 Anti-corrosive Eposy Primer Kit, 5L $187.21 6103 Rapid System Body Filler, 3L P65-CR $63.05 6208 Rapid System Glaze, 880ML P65-CR $35.73

PAGE 70

PART NO. DESCRIPTION LIST 10-1 Universal Urethane Clear Coat 4.2 VOC P65-C $65.60 12-4 Activator FAST, Qt $33.25 13-4 Activator MEDIUM, QT $33.25 14-4 Activator SLOW, QT $33.25 15310 Special Lite Filler, Gallon P65-C $26.17 16500 USC GOLD P65-C $72.31 17000 USC GRIP P65-CR $35.53 1800-2 Defender Pro Bedliner Kit $183.75 19000 USC PLUS P65-C $46.52 2000-2 Dominator Truck Bed Liner Kit Black $185.60 2100-2 Dominator Truck Bed Liner Kit Tintable $185.60 21330 Feather Rite, Gallon P65-C $29.76 24030 Duraglas, Gallon P65-CR $85.00 26012 Icing Lite Gold 12 oz. Pouch P65-C $17.17 26006 Icing 24oz Tube P65-C CONTACT YOUR LOCAL REP 26011 Icing 30oz, Pumptainer Finishing Putty P65-C CONTACT YOUR LOCAL REP 26037 Pro Flex 30oz Pumptainer Finishing Putty P65-C $52.94 37000 AUTOWRITER MARKERS (12) Assorted Colors $118.40 37001 AUTOWRITERS MARKER BLUE $9.87 37002 AUTOWRITERS MARKER PINK $9.87 37003 AUTOWRITERS MARKER YELLOW $9.87 37004 AUTOWRITERS MARKER WHITE $9.87 37007 AUTOWRITERS MARKER GREEN $9.87 37008 AUTOWRITERS MARKER RED $9.87 77701 Multi-Purpose Filler Pouch, 8oz P65-CR CONTACT YOUR LOCAL REP 77702 SMC/Fiberglass Filler Pouch, 8oz P65-CR CONTACT YOUR LOCAL REP 77703 Final Finish Glaze Pouch, 8oz P65-C CONTACT YOUR LOCAL REP 77704 Flexible Glaze Pouch, 8oz P65-C CONTACT YOUR LOCAL REP 77705 2-in-1 Filler, 8oz P65-C CONTACT YOUR LOCAL REP 77706 Metal Grip Filler, 8oz P65-CR CONTACT YOUR LOCAL REP 991302 6" Purple Premium PSA, P036, 50/box CONTACT YOUR LOCAL REP 991303 6" Purple Premium PSA, P040, 50/box CONTACT YOUR LOCAL REP 991306 6" Purple Premium PSA, P080, 50/box CONTACT YOUR LOCAL REP 991308 6" Purple Premium PSA, P120, 50/box CONTACT YOUR LOCAL REP 991310 6" Purple Premium PSA, P180, 50/box CONTACT YOUR LOCAL REP 991312 6" Purple Premium PSA, P240, 50/box CONTACT YOUR LOCAL REP 991314 6" Purple Premium PSA, P320, 50/box CONTACT YOUR LOCAL REP 991316 6" Purple Premium PSA, P400, 50/box CONTACT YOUR LOCAL REP 991318 6" Purple Premium PSA, P600, 50/box CONTACT YOUR LOCAL REP 991319 6" Purple Premium PSA, P800, 50/box CONTACT YOUR LOCAL REP 991320 6" Purple Premium PSA, P1000, 50/box CONTACT YOUR LOCAL REP 991322 6" Purple Premium PSA, P1500, 50/box CONTACT YOUR LOCAL REP

PAGE 71

PART NO. 8303

LIST $4,895.00

PART NO. 8202

LIST $2,695.00

PART NO. 8003

LIST $4,395.00

PART NO. 8002

LIST $1,995.00 71

PAGE 72

PART NO. 5700HT

LIST $309.95

PART NO. 6148

LIST $99.95

PART NO. 6204

PART NO. 6146

LIST $219.95

LIST $309.95

PART NO. 6076

LIST $259.79

PART NO. 5003-03

LIST $199.95

72

PAGE 73

UG5000W, SOLVENTBORNE AND WATERBORNE SPRAY GUN CLEANER SOLVENTBORNE SPRAY GUN CLEANING

• 14 L (3.7 gal) of wash solvent is pumped through 14 jets to flush the fluid passage and exterior of 2 spray guns in under 1 minute. A final rinse of 100 cc of clean solvent and air flush completes automatic cleaning.

• Automatic Cleaning is faster than cleaning by hand, allowing more cars to be painted each day.

• Automatic Cleaning provides a consistent result as opposed to cleaning by hand.

• Additional manual cleaning, when required, is provided by a flow-through brush.

Solvent flow is activated by a foot pedal.

WATERBORNE SPRAY GUN CLEANING - Manual Cleaning • Waterborne spray guns are cleaned effectively with 3 cleaning tools.

• Wash gun delivers high pressure water to flush the fluid passage in under 15 seconds.

• Flow-through brush removes paint from the outside of the spray gun.

• Air gun dries the spray gun.

• The cleaning power of water is enhanced by the addition of AQUA-KLEEN, Uni-ram’s cleaner.

PART NO. UG5000W

LIST $4,765.00

PART NO. 102-8125 102-8126 102-8300 500 UM120W UG5000W

DESCRIPTION Primary Mesh Filter $24.00 Secondary Mesh Filter Cong-Klean Flocculation URS500 Recycler 5Gl Waterborne Gun Cleaner Combined Waterborne and Solvent Spraygun

LIST $23.00 $72.00 $5,115.00 $2,215.00 $4,765.00

PART NO. 080-007 AG3 DESICCANT AIR DRYER PART NO. 080-442 SUPER DRY ATD AIR DRYER

CONTACT YOUR LOCAL REP FOR PRICING!

PAGE 74

The Wizard 21 HD Big Throw Polisher!

Contains: • Mystic Nano Wax 8oz • Mystic Cut 8oz • 6" Microfiber Cutting Pad • 6" Foam Polishing Pad, orange • 6" Foam Finishing Pad, gray • FREE pad conditioning brush PART NO. 99121

WIZARDS 21™ HD Big Throw Polisher • DIY- Easy to Use • Removes scratches with professional results • Corrects imperfections without swirls or holograms • No burns from paint overheating • High torque cuts working time PART NO. DA21HD (21MM HD DA POLISHER)

FEATURES: • Huge 21mm Orbital with Dual Action • 900W 7.5A • EZ start/No-Delay Trigger • Constant Torque/Speed Control • 1-6 Speed Dial PART NO. DA21HDKIT (21MM HD DA POLISHER/SSR KIT)

Mist-N-Shine®

Finish Cut™

Mystic Cut™

LIST $89.13

• Adds a show-winning gloss & slickness.

• Brightens paint, chrome, plastics.

• Safe for show chrome and Lexan.

• Hides swirls, will not scratch* or streak*, even in direct sun.

PART NO. 01214 (22OZ.)

LIST $15.41 PART NO. 01217 (GALLON)

LIST $ 64.88

Shine Master™

• Excellent cleaning/tough poly acrylic protection.

• Use as a wax replacement, swirl mark remover, or finishing (show) glaze by hand or machine.

PART NO. 11033 (32OZ.)

LIST $18.00 PART NO. 11036 (GALLON)

LIST $125.24

LIST $329.95

LIST $28.89 PART NO. 11041 (GALLON)

• Fast cut on dead paint, gelcoat and fiberglass.

• Removes 1200 grit or finer sand scratches.

• High gloss finishing on fresh or aged, single stage paint and clear coat.

• No wax, silicone or crystalline silica.

LIST $101.74

Mystic Polish™

• Exclusive “Nano-Sphere Technology” incorporates latest Nano abrasives.

• Use as stand alone polish or final step in the buffing process.

PART NO. 11044 (32OZ.)

PART NO. 11047 (32OZ.)

PART NO. 11043 (GALLON)

PART NO. 11050 (GALLON)

LIST $28.89

LIST $41.37

LIST $100.52

LIST $143.96

• Convenient storage rack hold four GoJaks.

• Loads & unloads in seconds • Rolls easily to work area or out of the way for storage.

(GoJaks are not included)

LIST $54.84

LIST $190.85

Turbo Cut™

LIST $64.41

PART NO. 456

• Exclusive “Nano-Sphere Technology” incorporates latest Nano abrasives.

• Progressive cutting action with no grit.

• Levels 1200-2000 grit sand scratches.

• Excellent all around compound for removing severe swirls, defects, fading and water spotting PART NO. 11048 (32OZ.) PART NO. 11052 (GALLON)

LIST $100.52

Unique gravity feed design forces the particles into a replaceable hardened steel mixing chamber & passes through a ceramic nozzle.

PART NO. 007

GoJak®Storage Rack

LIST $414.84

• No swirls, easy clean up.

• Levels 1500 grit or finer sand scratches.

• One step buffing on most colors and clear coat, fresh or aged finishes.

• Brightens dull finishes, removes scratches and heavy paint overspray PART NO. 11040 (32OZ.)

Gravity Feed Sand Speed Blaster

• 1800-4800 OPM • Durable 20’ Cord • Includes 6” Backing Plate • Includes WizardsTote Bag

PART NO.

DESCRIPTION

LIST

007

Gravity Feed Sand Speed Blaster

$64.41

5211

6313

Gojack Self-Load Dollie 1300 lbs.

Up to 5000 lbs with 4 units Gojack Self-Load Dollie 1550 lbs.

Up to 6200 lbs with 4 units

G567R

GoJack Storage Rack

$101.74

HS2020

Spot Blast Recovery System

$41.07

$297.60 $318.93

2921 Syene Road, Madison, WI 53713

PART NO. DESCRIPTION LIST 51001 Trim Black, 15oz Aerosol $8.46 51002 High Build Primer Surfacer, Gray, 15oz Aerosol $17.97 51003 Self Etch Primer, Gray, 15oz Aerosol $18.62 51004 Guide Coat, 15oz Aerosol $8.13 51005 Chip Guard, 15oz Aerosol $24.83 51006 Semi Gloss Black, 15oz Aerosol $8.46 51007 High Build Primer Surfacer, Black, 15oz Aerosol $19.97 51008 Flat Black, 15oz Aerosol $6.22 51009 Flexible Primer Rose, 15oz Aerosol $16.17 51010 Gloss Black, 15oz Aerosol $6.22 51011 Plastic Adhesion promoter, 15oz Aerosol $24.90 51012 Color Blender, 15oz Aerosol $15.32 51013 Weld Thru Primer, 15oz Aerosol $22.82 51014 Glass Cleaner, 15oz Aerosol $5.33 51015 Primer Sealer, Gray, 15oz Aerosol $10.42 51017 Surface Cleaner, Low VOC, 15oz Aerosol $8.38 51018 Plastic Surface Cleaner, 15oz Aerosol $10.62

PAGE 75