Balloon Column Stand Flower Theme Instruction

Balloon Column Stand e-Instruction

Catelories: • • • •

Part I: Bottom Part Part II: Flower Top Part Part III: Middle Stem Part More Beautiful Balloon Column Stand Gallaries

Material:

Part I: Bottom Part Decoration

Tips: It’s better to use clear tape to secure the connector and pole to prevent fall apart easily

Two balloons are tied together, and we need another set of tiffany color balloons being tied together

Two sets of smaller balloons & two sets of large Tiffany color balloons

Tie two balloon sets to the bottom of the balloon column stand

Build the white balloons sets on top of the Tiffany color balloon sets

Repeat the steps from Tiffany Balloons above.

Below is the final version of the flower base

Part II: Flower Top Part

Follow the steps below Inflate 5 Tiffany color balloons. we are going to create the outer part of the flower.

Tips: DO NOT inflate the balloon too much. The bigger the balloons are the harder it takes to make this flower top.

Outer part (tiffany color) size:

Middle part (white color) size :

inner part (pink color) size :

Inflate 5 tiffany balloons and use the balloon clips (included in the package you purchased) to tighten each balloon.

Tie all the balloons ( 5 tiffany color, 5 white color and 1 pink) to the follow balloon flower clip ( included in the package)

CORRECT installation to the flower clips

INCORRECT installation to the flower clips

Finally, we finished building the outer part of the flower

Next, we repeat the steps above to build the middle layer of the flower

Tips: the white balloons in the second layer are MUCH SMALLER than the tiffany color balloons.

1)

2)

2)

4)

Install the pink one in the inner section of the flower

Below is the final version of the flower top

Part III: Middle Stem Part

Inflate the magic balloon ( the longest ones) by air pump ( NOT included).

The air pump can be purchased at 99 cent store, Walmart, Target, or Party City.

Our package would be oversize costing much more if included, so sorry about this inconvenience.

Do NOT fully inflate the long magic balloon. Leave about 1� on top

Use the balloon clip provided in the package to tighten up the magic balloon

Cut the extra long magic balloon into half

Tighten up the top and the bottom of the inflated long magic balloon

Tie the long magic balloon ( the flower stem) to the pole of the balloon column base.

Go through underneath of the inflated white balloons that already attached to the pole.

Have the long magic balloon wrap around the pole and HOLD it for a few second to secure the shape of the magic balloons. Then slowly lift it to the top and tighten the other end to the top of the pole, making it look like climbing up the pole.

Install the flower on top of the stem

Secure the flower on the pole by using clear tape ( for demonstration, we use yellow tape to proper demonstrate how to attach the flower to the pole.

Congratulation You have master the skill of building a beautiful balloon flower tower!

Thanks You For Choosing

If you have any questions about building this balloon column stand, please feel free to contact us!