PRI_IFU_OccluSense_QS_EN_002_200110.qxp_Layout 1 Kopie 24.01.20 14:55 Seite 1
Quick Start Guide 1 PREPARATION
Make sure your iPad is connected to your wireless network and that your wireless network supports the 2.4 GHz (IEEE802.11 b/g/n) frequency. Have your WLAN password ready. Install the OccluSense®-iPad-App www.occlusense.com/install
2 INITIAL SETUP
In the OccluSense®-iPad-App select ‘Settings’ and tap on ‘Initial setup’.
Switch on the handheld. (press the pink operating button 1)
Your handheld first creates its own network (SSID) which is shown with the password (WEP) in the display.
Tap 'Start' in the OccluSense®-iPad-App to initiate the setup process and type the WEP password into the dialog box.
Confirm the following dialog with ‘Join’.
3 WLAN SETUP
Confirm the following dialog with ‘Yes’ to connect the OccluSense® handheld device with your WLAN.
A screen opens with three steps to be performed. Tap on ‘Next’ to start the process. Now enter your network name (the last selected SSID is suggested) and your WLAN password. Once the data has been entered, tap ‘Next’.
The OccluSense®-iPad-App establishes a connection to the handheld via this network. A successful connection between the handheld and the wireless network is indicated by green signal bars and the first 6 characters of the wireless network in the upper left corner of the handheld display. If the connection between the handheld and the wireless network has failed, the connection status is indicated on the handheld display by transparent signal bars. In this case reset the handheld (manual chapter 19.2) and start the initial setup again.