ENGLISH PRODUCTS CATALOG
7
THE COMPANY
11 15
INDUSTRY ENVIRONMENT
19 21
SOCIAL ACTION
QUALITY
23
SURFACE TREATMENT
25
PRODUCTS
33
EXTERNAL HEXAGON
51
MORSE INTERNAL HEXAGON
57
MORSE TAPER
65
HEXAGONAL MORSE TAPER
77
FRICTIONAL MORSE TAPER
85
FLEXCONE速
91
MINI FLEXCONE速
95 113
PROSTHETIC ACCESSORIES
114 114
INSTRUMENTAL KITS
TECHNICAL INSTRUCTIONS NOMENCLATURES
TO GET TO 12 YEARS
GROWTH ISN’T ENOUGH, YOU NEED TO UPGRADE
All history begins with a first step. And just keep going success with a constant wish to upgrade. For 12 years, the DSP BiomedicalÂŽ works daily to offer for your customers the best and most current products of dental implants and prosthetic components. Today, the company has the largest line of products at national market, exporting to many countries. Already had your quality, precision and technology certificated by many regulatory agencies of sector. To inovate, you need to restart every day. Always with same tought: provide a maximum customers satisfaction.
+55 41 3291-2200 www.dspbiomedical.com.br
EXPERT IN MAKE SMILE The DSP Biomedical速 linked the practice of the most qualified dentists with a precision and technic of the engineers, to create the bests and inovated products at dental areas, oral and maxillo-facial surgery and implantodonty. The results can be viewed at patients smiles and in the life quality by them conquered.
THE COMPANY TRUST. THAT IS OUR MAIN RAW MATERIAL AND, AS WELL THE MAIN RESULTS OF OUR WORK To DSP Biomedical速, your customers trust is very important. Because that, the company has the constant commitment for researches in new technologies that used to manufacture dental products with high quality and low prices. Stabilishing a great cost benefits relationship at market.
7
+55 41 3291-2200 www.dspbiomedical.com.br
TECHNOLOGY
FOR BETTER SMILE
ACCURACY AND INNOVATION GENERATE QUANTITY WITH QUALITY. The DSP Biomedical速 has the most complete products line in dental procedures, oral maxillofacial surgery and implantodonty at national market. There are more than 1.500 items manufactured by milesimal accuracy equipments, measure optic microscope and measure projectors to ensure a maximum quality and the best finishing.
THE INDUSTRY COMMITMENT TO MAKE THE BEST PRODUCT WITH MICRO ACCURATE. The combination of biologic trust and smart systems result in accurated dental implants and prosthetic solutions. That work technic is registered at National Health Agency (ANVISA), that certifies the quality and competence of DSP Biomedical速.
11
DENTAL H WITH AGILITY AND
DSP BIOMEDICAL速 attends all national market and export implants and abutments for several countries. No matter the map place you are, you can allways count on with the best solutions in Odontology, Bucomaxilofacial Surgery and Implantology. The biological liability of the DSP BIOMEDICAL速 products and the agility on delivery,assure the best cost-benefit relation for you.
+55 41 3291-2200 www.dspbiomedical.com.br
HEALTH
D COST-BENEFIT
RESPECT AND CARE WITH ENVIRONMENT, THAT IS SMILE TO LIFE. To manufacture the best dental products and attend all customers needs without harm or pollute the environment, the DSP Biomedical速 works with current standards of environmental and health. Practice like that proves that a complete smile is consequence of respect, balance and harmony with environment.
ENVIRONMENT BE SUSTAINABLE IS THINK OF TODAY AND TOMORROW. The DSP Biomedical速 selects and separates 100% of your manufactures waste and intend to specialized company. The company takes advantage of natural lights in your instalations and avoid water waste at your activities. That responsable tasks certifies a better and healthy environments and colaborate with a better future for the planet.
15
SOCIAL NETWORK
/dspbiomedical /dspbiomedical
/dspbiomedical
ON-LINE
CHAT ONLINE Thinking at better and easier than phone invoices, the DSP Biomedical速 started a new projetct to answer and listen our customers. Shortening the distance between company and customers that project have a tool where the dentists will have more details about your purchases and could talk right to our employes for questions. Visit our website and know more about that project: www.dspbiomedical.com.br
17
IS OUR DUTY TO ENSURE THE SMILES. The DSP Biomedical速 supports social institutions and social projects that transform the reality of childhood and adolescence at country, like the Fund of United Nations to childhood (UNICEF).
SOCIAL ACTION SMILE IS A BENEFIT FOR EVERYONE. The future generation will be responsable to turn the world into a better and a happier place. Because that, the DSP Biomedical速 are constantly investing at social projects that offers new opportunities to the kids. A commitment that begins today and will make diference at future.
19
ACCURACY
THE DETAIL IN DETAILS When the subject is people health, don’t have space to mistakes. Because that, the DSP Biomedical® have a procedure that strict control the quality proccess with accuracy. Each prosthetic components and each models of dental implants are developed with researches based in bioengineering aspects. Beyond that, to garantee total hygiene of labs and packaging, our products undergo proccess of certifies quality in raw materials, decontaminations and sterilization.
THE RECOGNITION OF YOUR WORK BEGINS WITH OUR RESPECT AT MARKET. The DSP Biomedical® was recognized and registered by the biggest quality institutions and are qualified to manufacture, sell and export products in dental areas, oral Maxillo-facial surgery and Implantodonty.
QUALITY
R RT GUA ANTE PO
ED
MADE IN BRAZIL
A RT GU RANTE PO
Certificate of quality Management ISO 9001:2000.
EX
ED
EX
KNOW THE MAIN CERTIFICATES OF BRAND
Certificate of health products, regulatory requirements for export.
93/42CCE
PCT Patent Cooperation Treaty - Russia
(NBR ISO 13.485:2004).
Certificate of Good practice, the national agency for health monitoring.(ANVISA) RDC 59/200
FOR DSP BIOMEDICAL速, THE MOST IMPORTANT CERTIFICATE IS THE TRUST AND SATISFACTION OF OUR CUSTOMERS.
21
IMPLANT SURFACE All of implants, except provisional, have double surface treatment. That treatment are compound with mechanical attack with micro balls and acid conditioned, even passive treatment.
BONE SURFACE
IMPLANT SURFACE
SLA ZIRCON速 TREATMENT It is the newest totally inert surface treatment, that promotes a nanotopography of surface with more harmonic peaks and valleys and a highly hidrophilic surface. Excellent to good fixation of biological tissues.
SURFACE TREATMENT
Intense bone formation seen in optical microscopy
Analysis of the roughened surface of the implant with SEM
Analyzing the composition of the material in rough
Implant threads viewed by SEM
23
SMILES COMES IN BOX The DSP Biomedical速 constantly seeks inovations that provide you the highest accuracy in the assembly during surgical implants. The result is: higher quality and durability for protheses, smiles more and more healthy and patients with better quality of life.
PRODUCTS CATALOG
IN THE FOLLOWING PAGES, YOU WILL FIND OUT DETAILS OF OUR PRODUCTS LINE AND ITS TECHNICAL SPECIFICATIONS.
25
THE DSP BIOMEDICA
NEW RELEASE
SHORT IMPLANTS Specifically developed for use where bone height is limited. Implants are among the shortest in the market with changes in connectivity prosthetic. Make availabe implant therapy for patients with low bone plate, eliminating the bone graft necessity. With this surgery is achieved faster and easier.
SLIM IMPLANTS These implants has been widely used due to biomechanical success when we have a board of fine bone resorption resulting physiological or generally for rehabilitation and upper lateral incisors. We have a wide range of options with prosthetic implants that result in excellent aesthetics.
CAL PRESENTS ITS 速
SES OSTEOFIT
速
3291-2200 www.dspbiomedical.com.br
+55 41
LEARN ABOUT OUR LINES
DSP BIOMEDICAL速 IMPLANTS NEW PACKAGE WITH MORE SECURITY AND TECHNOLOGY The new packaging IV are much more intelligent and versatile. Designed to avoid any mechanical contact contemplating external drives on surfaces. They have smart opening jam with retractable lid. Again, the DSP 速 Biomedical think about your comfort, practicality and safety.
PRACTICALITY AND SAFETY
Removal of the implant with titanium clamp.
3291-2200 www.dspbiomedical.com.br
+55 41
Assembling the assembler.
Fit key internal connection.
NEW PACKAGING AND LABELS OF
DSP BIOMEDICAL
®
MUCH MORE CONVENIENCE, COMFORT AND SAFETY
TO YOU AND YOUR PATIENTS
Make life easier for those who purchase DSP Biomedical® is our main concern. Again we innovate, bringing you new packaging. We combine a visually appealing layout and concepts aligned to the company and quality of our products.
Color identification Product Line Product Name Diameter Reference Code
Main changes: • respective color code • número de referência • window in the package (you can now see the product you are buying).
Product Name Reference Code Lot Manufacture Date Expiration Date
3291-2200 www.dspbiomedical.com.br
+55 41
EXTERNAL HEXAGON CYLINDRICAL • DESIGN: the implant OSTEOFIT HE platform was designed with external hexagon and has interchangeability with multiple systems. Your body is cylindrical, has triangular threads that compress the bone tissue and an ultra polished 1mm strap on the collar of the platform base. Its installation is done through the mount giving greater strength when compared to the implant external hexagon internal torque. • MATERIAL: Titanium level IV. • SURFACE: SLA Zircon®. • PRESENTATION: avaliable in versions with or without mount. Not included cover screw. • PROSTHETIC SOLUTIONS: is indicated for single or multiple clinical applications for cemented prostheses, screwed or overdenture resulting in excellent esthetics. • ROTATION DRILLING: 400 to 1.200 rpm. • ROTATION INSERTION: 10 to 30 rpm. • INSERTION TORQUE: 35 to 55 Ncm.
P SW H
TECHNIQUE SPECIFICATION øP 3.3 4.1 5.0
P SW
M
H A
D
SW H M 2.4 1.0 1.8 2.7 0.7 2.0 2.7 0.7 2.0 Cylindrical øD øA 3.3 2.4 3.75 2.7 4.0 3.0 5.0 4.0
EXTERNAL
HEXAGON TECHNICAL SPECIFICATIONS OF IMPLANTS SLIM EXTERNAL
HEXAGON
EXTERNAL
Ø 3.3
HEXAGON
Ø 3.3
Ø 3.75
Ø 4.0
Ø 5.0
EXTERNAL HEXAGON
EXTERNAL HEXAGON
Platform 4.1
Platform 3.3
7.0
8.5
17.3707
17.4007
17.5007
17.3308
10
8.5
18.3308
17.3708
17.4008
17.5008
17.3310
11.5
10
18.3310
17.3710
17.4010
17.5010
17.3311
13
11.5
18.3311
17.3711
17.4011
17.5011
17.3313
15
13
18.3313
17.3713
17.4013
17.5013
17.3315
17
15
18.3315
17.3715
17.4015
17.5015
17.3317
17
18.3317
17.3717
17.4017
MODELS AND LENGTHS
MODELS AND LENGHTS
SEQUENCE
Countersink 5.0
Drill 4.3
Drill 3.8
Drill 3.5
Drill 3.3
Drill 3.15
Drill 3.0
Pilot 2.0 / 3.0
Drill 2.8
Drill 2.5
Spear / Spiral 2
OF DRILLS
3.3 mm 3.75 mm 4.0 mm 5.0 mm Indicated
Optional
IMPLANTS MOUNTED • ENCODING UP with an M of MOUNT after the code. Example: 17.3308 without mount and 17.3308M with mount. • SEE next page the procedure for use of the implant mounted.
CAPTURE AND TRANSPORT OF IMPLANT NOT MOUNTED 1
2
3
1 - With the Badock take the implant to the grip 2 - Takeoff the badock 3 - Fix the mount.
33
Remove the blister and put the steril package over surgical bench. Attach the traceability label on patient records.
Prepare the surgical place like the sequence of drills indicated.
• Using provisional mount.
1
2
3
• Cut the mount on indicated place as occlusal height; It’s possible with height 4 or 6mm. Both uses one capsule of 4 or 6 mm.
1
2a
2b
6mm 4mm
6mm
4mm
TECHNICAL INSTRUCTIONS • Transfer sequence, using a cemented abutment for provisional or definitive.
1
2
3
• Uses sequence of capsule with the right preparation and cementation.
1
2
4
5
3
35
EXTERNAL HEXAGON CYLINDRICAL WITH INTERNAL TORQUE • DESIGN: the implant Osteofit HE Internal Torque was designed with platform external hexagon and have interchangeability with many others systems. Has one internal hexagon, wich increases the mechanical resistance when apply high torques, keeping the integrity of external hexagon. Easing your installation with less trauma that was made with internal hexagon driver without using mount, reducing surgical time. • MATERIAL: Titanium grade IV. • SURFACE: SLA Zircon®. • PRESENTATION: only available for connection driver with internal torque (ConnectHex). Cover screw not included. • PROSTHETIC SOLUTIONS: is indicated for clinical applications single or multiple, for cemented prostheses, screw-retained prostheses or overdenture resulting in great esthetics. • SPEED DRILLING: 400 a 1.200 rpm. • ROTATION INSERT: 10 a 30 rpm. P SW
• TORQUE INSERTION: 35 a 55 Ncm. M
H
TECHNICAL SPECIFICATIONS øP SW H M 4.1 2.7 0.7 2.0
P SW
M
H A
D
M
Cilyndrical øD øA 3.3 2.4 3.75 2.7 4.0 3.0 5.0 4.0
EXTERNAL
HEXAGON TECHNICAL SPECIFICATIONS OF IMPLANTS EXTERNAL
Ø 3.3
HEXAGON
Ø 3.75
Ø 4.0
Ø 5.0
EXTERNAL HEXAGON
CYLINDRICAL INTERNAL TORQUE 19.4005
19.5005
19.3707
19.4007
19.5007
5.5 7.0 8.5
16.3308
19.3708
19.4008
19.5008
10
16.3310
19.3710
19.4010
19.5010
11.5
16.3311
19.3711
19.4011
19.5011
13
16.3313
19.3713
19.4013
19.5013
15
16.3315
19.3715
19.4015
19.5015
17
16.3317
19.3717
19.4017
MODELS AND LENGTHS
Countersink 5.0
Drill 4.3
Drill 3.8
Drill 3.5
Drill 3.3
Drill 3.15
Drill 3.0
Pilot 2.0 / 3.0
Drill 2.8
Drill 2.5
Spear / screw 2
SEQUENCE OF DRILLS
3.3 mm 3.75 mm 4.0 mm 5.0 mm
Indicated
DRIVERS
Optional
This implant is connected with an internal hexagon connection driver (ConnectHex). Its has fit with contra-angle or Torque Wrench (ratchet). 28.5020
28.2020
28.3020
CAPTURE AND TRANSPORT OF IMPLANT 1
2
3
1 - With the Badock take the implant to the grip 2 - Takeoff the Badock 3 - Fix the internal connection driver (ConnectHex).
37
EXTERNAL HEXAGON CONICAL WITH INTERNAL TORQUE • DESIGN: the implant Osteofit HE TI conical was designed with platform external hexagon with interchangeability with many others systems. Your conical body have the form of tooth root, giving him higher torque during your insertion. With strap polished of 1mm in platform and an indication for immediate placement after extraction. Your insertion are made with internal connection driver, that sometimes easer your insertion than a mounted system. • MATERIAL: Titanium grade IV. • SURFACE: SLA Zircon®. • PRESENTATION: only available in not mounted version . Cover screw not included. • PROSTHETIC SOLUTIONS: is indicated for clinical applications single or multiple, for cemented prostheses, screw-retained prostheses and overdenture producing a great esthetics. • SPEED DRILLING: 400 a 1.200 rpm. • ROTATION INSERT: 10 a 30 rpm. • TORQUE INSERTION: 35 a 55 Ncm. P SW
M
H
TECHNICAL SPECICATIONS
P SW H
øP SW H M 4.1 2.7 0.7 2.0
P SW M
H A
D
M
Cilyndrical øD øA 3.8 2.5 4.3 2.8 5.0 3.5
EXTERNAL
HEXAGON TECHNICAL SPECIFICATIONS OF IMPLANTS EXTERNAL
Ø 3.8
Ø 4.3
Ø 5.0
7
41.3807
41.4307
41.5007
10
41.3810
41.4310
41.5010
11.5
41.3811
41.4311
41.5011
13
41.3813
41.4313
41.5013
15
41.3815
41.4315
41.5015
HEXAGON EXTERNAL HEXAGON
CONICAL
INTERNAL TORQUE
MODELS AND LENGTHS
Conical Drill 5.0
Conical Drill 4.3
Conical Drill 3.8
Spear
SEQUENCE OF DRILLS
DRILL
HEIGHT
3.8 mm
SHORT
5-6-7
4.3 mm
MEDIUM
8.5 - 10.0 - 11.5
5.0 mm
LONG
13.0 - 15.0
DRIVERS This implant is connected with an internal hexagon connection driver (ConnectHex). Its has fit with contra-angle or Torque Wrench (ratchet). 28.5020
28.2020
28.3020
CAPTURE AND TRANSPORT OF IMPLANT 1
2
3
1 - With the Badock take the implant to the grip 2 - Takeoff the badock 3 - Fix an internal hexagon connection driver (ConnectHex).
39
EXTERNAL HEXAGON • DESIGN: the implant Osteofit HE BIOFIT was designed with external hexagon platform, has interchangeability with many others systems. Has a cilyndrical body with triangular threads that present one groove retention perfil. Idealized to have primary stability in low density bone, with chamfers sharpest and apex of smaller diameter (there are drilling protocol reduced). Both cutting facets at middle third of implant help at secondary stability and give anti-rotacional clamping. Your insertion driver is like a star shape (ConnectStar) avoiding galling between driver and implant. • MATERIAL: Titanium grade IV. • SURFACE: SLA Zircon®. • PRESENTATION: only available in not mounted version Cover screw not included. • PROSTHETIC SOLUTIONS: is indicated for clinical applications single or multiple, for cemented prostheses, screw-retained prostheses and overdenture, resulting in great esthetics. • SPEED DRILLING: 400 a 1.200 rpm. • ROTATION INSERT: 10 a 30 rpm (with abundant irrigation). P SW
• TORQUE INSERTION: 35 a 55 Ncm. M
H
TECHNICAL SPECIFICATIONS
P SW
øP SW H M 4.1 2.7 0.7 2.0
P SW M
H
H
A
D
M
Cilyndrical øD øA 3.5 1.8 4.0 2.3 4.5 2.8 5.0 3.3
EXTERNAL
HEXAGON
TECHNICAL SPECIFICATIONS OF IMPLANTS EXTERNAL
HEXAGON
Ø 3.5
Ø 3.75
Ø 4.0
Ø 4.5
Ø 5.0
1
2
EXTERNAL HEXAGON BIOFIT
5.5
19.3705B
19.4005B
19.4505B
19.5005B
7
19.3707B
19.4007B
19.4507B
19.5007B
8.5
19.3508B
19.3708B
19.4008B
19.4508B
19.5008B
10
19.3510B
19.3710B
19.4010B
19.4510B
19.5010B
11.5
19.3511B
19.3711B
19.4011B
19.4511B
19.5011B
13
19.3513B
19.3713B
19.4013B
19.4513B
15
19.3515B
19.3715B
19.4015B
17
19.3517B
19.3717B
19.4017B
GROOVE RETENTIVE
NARROW EDGE
3
CONNECTION DRIVER CONNECTSTAR
SEQUENCE
OF DRILLS
4
TAIL SHARK
Drill 4.3
Drill 3.8
Drill 3.3
Drill 3.15
Drill 3.0
Pilot 2.0 / 3.0
Drill 2.8
Spear / 2.0
5
3.5 mm
FULL TREATMENT
3.75 mm 4.0 mm 4.5 mm 5.0 mm
Indicated
DRIVERS This implant is connected with a connection driver ConnectStar. Its has fit with contra-angle or Torque Wrench (ratchet).
28.5020S
28.2020S
28.3020S
CAPTURE AND TRANSPORT OF IMPLANT 1
2
3
1 - With the Badock take the implant to the grip 2 - Takeoff the badock 3 - Fix an internal connection driver (ConnectStar).
41
EXTERNAL HEXAGON PROSTHETIC LINE PROSTHETIC LINE
PROSTHETIC SOLUTIONS
Platform 3.3 - SLIM
OVER IMPLANT
1.3 45 Ncm
0.9 15 Ncm
Analog Straight Abutment
Code
Height Profile
1.3300
Cover Screw Code
1
3.3
Code 5.3312
1.3301 1.2
1.2 30 Ncm
PROSTHETIC SOLUTIONS Straight healing cap Height Profile 2
3.3
Code 9.3332
3
3.3
9.3333
4
3.3
9.3334
5
3.3
9.3335
6
3.3
9.3336
CEMENTED
Open tray impression transfer Code 9.3301
1.3 45 Ncm
1.2
MODEL 17 - SLIM
Anatomical Abutment Height Profile Code 1.2 30 Ncm
Closed tray impression transfer Code Anatomical healing cap Height
Profile
2
4.0
Code 9.3342
3
4.0
9.3343
4
4.0
9.3344
5
4.0
9.3345
6
4.0
9.3346
1
4
4.3301L
2
4
4.3301L
3
4
4.3301L
9.3300
1.2
PROSTHETIC SOLUTIONS OVERDENTURE Lab prosthetic screw Code
2.4 40 Ncm
3.3350
O’ring abutment Height Code Screw Code 3.3310 3.3300
1
2.3341
2
2.3342
3
2.3343
4
2.3344
5
2.3345
EXTERNAL
HEXAGON
S
1.3 45 Ncm
1.3 45 Ncm
1.3 45 Ncm
CoCr plastic UCLA
Plastic UCLA
1.3 45 Ncm
Titanium UCLA
CoCr Pillar
Code
Code
Code
Code
3.3301
5.3501
5.3310
5.3501T
3.3302
5.3502
5.3410
S 1.3 45 Ncm
Impression Transfer SLIM
Angled abutment 25º
Angled abutment 15º Height Angle
1.3 45 Ncm
Code
Height Angle
Code
Height
Code
1
15
2.1531N
1
25
2.2531N
4
4.3490I
2
15
2.1532N
2
25
2.2532N
6
4.3310I
3
15
2.1533N
3
25
2.2533N
Plastic cylinder
Analog
Height
Code
Height
Code
4
4.3410I
4
4.3321S
4
4.3410M
6
4.3321L
6
4.3310I
6
4.3310M
S 2.4 40 Ncm
O’ring abutment Micro o’ring abutment Height
Closed keeper Code
Positioner o’ring kit Code
2.4001
2.4094
Rubber ring Code 2.4091 Soft 2.4092 Medium 2.4093 Hard
Code
1
2.3441
2
2.3442
3
2.3443
4
2.3444
5
2.3445
Micro o’ring abutment
Micro closed keeper Code
Micro Positioner o’ring kit Code
2.4101
2.4099
Micro Rubber ring Code 2.4095 Medium
43
EXTERNAL HEXAGON INTERMEDIATE COMPONENTS PROSTHETIC LINE
PLATFORM 3.3 - SLIM
PROSTHETIC SOLUTIONS CONICAL MINI-PILLAR
1.2
2.0 30 Ncm
1.2 15 Ncm
Open tray impression transfer Code 6.4091
Conical Mini Pillar
Healing Cap
Height
Code
Code
1
6.3401
6.4080
2
6.3402
3
6.3403
1.2
Closed tray impression transfer Code 6.4090
PROSTHETIC SOLUTIONS MODEL 17 - SLIM
CONICAL PILLAR
1.2
2.0 30 Ncm
1.2 15 Ncm
Open tray impression transfer Code 7.3393
Conical Pillar
Healing Cap
Height
Code
Code
1
7.3301
7.3380
2
7.3302
3
7.3303
1.2
Closed tray impression transfer Code 7.3392
EXTERNAL
HEXAGON IMEDIATE
PASSIVE SEATING 1.2 15 Ncm
1.2 15 Ncm
1.2
Analog Code 6.4022
Pilar de tit창nio (UCLA) Code
1.2 15 Ncm 1.2 15 Ncm
6.4212
Lab prosthetic screw Code 6.4055 1.2 15 Ncm
Analog
CoCr plastic UCLA Code
Code
Plastic Code
1.2
6.4031
6.4112
6.4021 1.2 15 Ncm
Screw Plastic UCLA
Code 6.4050
Code
Titanium
6.4012
Code 6.4062
1.2 15 Ncm
1.2
Titanium Pillar (UCLA)
1.2 15 Ncm
Code
Lab prosthetic screw Code
7.3511
7.4055 Analog
1.2 15 Ncm
Code
CoCr plastic UCLA
7.3321
1.2
Code 7.3411
Plastic UCLA
Code 7.3311
Screw Code 7.4050
45
EXTERNAL HEXAGON PROSTHETIC LINE PROSTHETIC LINE
PROSTHETIC SOLUTIONS
PLATFORM 4.1
OVER IMPLANT
1.3 45 Ncm
Analog MODEL 16 e 18 3.3
0.9 15 Ncm
Code
Straight Abutment
1.4000
Height Profile 1.2
1
3.3
Code 5.4012
Cover Screw Code 1.4001
PROSTHETIC SOLUTIONS
Open tray impression transfer Code 1.2 30 Ncm
CEMENTED
9.4001
MODEL 17 e 19 3.75
1.3 45 Ncm 1.2
4.0 5.0 Straight healing cap Height Profile
Code
2
4.0
9.4042
3
4.0
9.4043
4
4.0
9.4044
5
4.0
9.4045
6
4.0
9.4046
Anatomical Abutment Closed tray impression transfer Code 9.4000
1.2 30 Ncm
MODEL 41 3.8
Height Profile
Code
1
4
4.4001L
2
4
4.4002L
3
4
4.4003L
1.2
4.3 5.0
PROSTHETIC SOLUTIONS OVERDENTURE
Anatomical healing cap Height Profile 2
5.0
Code 9.4052
3
5.0
9.4053
Lab prosthetic screw Code
4
5.0
9.4054
3.4050
5
5.0
9.4055
6
5.0
9.4056
2.4 40 Ncm
O’ring abutment Height Code MODEL BIOFIT 3.5
1
2.4041
2
2.4042
3
2.4043
3.75
Screw
4.0
Code
4.5
4
2.4044
3.4010
5.0
5
2.4045
3.4000
EXTERNAL
HEXAGON
S
1.3 45 Ncm
1.3 45 Ncm
Anatomical Abutment LONG Height Profile 1
6.0
Titanium Pillar (UCLA)
Code 5.4310
2
6.0
5.4320
3
6.0
5.4330
1.3 45 Ncm
1.3 45 Ncm
1.3 45 Ncm
CoCr plastic UCLA
Plastic UCLA
CoCr Pillar
Code
Code
Code
5.4010
Code
3.4001
5.4201
5.4110
5.4202T
3.4002
5.4202
S
1.3 45 Ncm
Angled abutment 25º
Angled abutment 15º Height
Profile
1.3 45 Ncm
Code
Height Profile
Transfer
Code
1
15
2.1541N
1
25
2.2541N
2
15
2.1542N
2
25
2.2542N
3
15
2.1543N
3
25
2.2543N
Plastic cylinder
Analog
Height
Code
Height
Code
Height
Code
4
4.4490I
4
4.4410I
4
4.4021S
6
4.4090I
4
4.4410M
6
4.4021L
6
4.4010I
6
4.4010M
S 2.4 40 Ncm
O’ring abutment Micro o’ring abutment Height
Code
1
2.4141
2
2.4142
3
2.4143
4
2.4144
5
2.4145 Micro o’ring abutment
Closed keeper Code
Positioner o’ring kit Code
2.4001
2.4094
Micro closed keeper Code
Micro Positioner o’ring kit Code
2.4101
2.4099
Rubber ring Code 2.4091 Soft 2.4092 Medium 2.4093 Hard
Micro Rubber ring Code 2.4095 Medium
47
EXTERNAL HEXAGON INTERMEDIATE COMPONENTS PROSTHETIC LINE PLATFORM 4.1
PROSTHETIC SOLUTIONS CONICAL MINI PILLAR
1.2 15 Ncm
2.0 30 Ncm
1.2 15 Ncm
MODEL 16 e 18 3.3
Conical Mini Pillar
Mini-Pilar Ângulado
Height
Code
Height
Angle
1
6.4101
1
15
6.1541
2
6.4102
2
15
6.1542
3
6.4103
3
15
4
6.4104
Height
Angle
5
6.4105
1
25
6.2541
2
25
6.2542
MODEL 17 e 19 3.75
Healing Cap
Code
6.1543
Code 6.4080
Code
4.0 5.0
PROSTHETIC SOLUTIONS CONICAL PILLAR
MODEL 41 3.8
1.2 15 Ncm
2.0 30 Ncm
1.2 15 Ncm
4.3 5.0
Pilar Ângulado Conical Pillar
MODEL BIOFIT 3.5 3.75 4.0 4.5 5.0
Height
Code
1
7.4001
2
7.4002
3
7.4003
Height
Angle
1
15
7.1541
2
15
7.1542
3
15
7.1543
Code
Angle
Code
7.4080
1
25
7.2541
2
25
7.2542
Height
Code
Healing Cap
EXTERNAL
HEXAGON IMEDIATE
PASSIVE SEATING 1.2 15 Ncm
1.2 1.2 15 Ncm
1.2
Analog Code 6.4022 Titanium Pillar (UCLA)
Open tray impression transfer Code
Code
6.4091
6.4212
1.2 15 Ncm
1.2 15 Ncm
Lab prosthetic screw Code 6.4055
Plastic 1.2
Analog
1.2 15 Ncm
Code
Code
6.4021
6.4112
1.2
Code
Pilar base c/Cr
6.4031 1.2 15 Ncm
Screw Code Closed tray impression transfer
Plastic UCLA
Code
Code
6.4090
6.4012
6.4050 Titanium Code 6.4062
1.2 15 Ncm
1.2 15 Ncm 1.2
Titanium Pillar (UCLA) Code
Open tray impression transfer Code
1.2 15 Ncm
Lab prosthetic screw Code
7.4211
7.4093 7.4091
7.4055
1.2 15 Ncm
1.2 15 Ncm
Analog
1.2
Pilar base CrCo Code
Code 7.4021
7.4111
Closed tray impression transfer 7.4092
Plastic UCLA Code
7.4090
7.4011
Code
Screw Code 7.4050
INTERNAL MORSE HEXAGON • DESIGN: the implant Osteofit® HIM were designed with the internal hexagon concept linked with the Morse Taper efficiency. Your body is cylindrical and have self-cutting trapezoidal threads. In implant cervical third region that threads become in micro threads with double entry that help at primary stability and increase the osseointegration area. Yours advantage are: prosthetic platform reduced, only one prosthetic solution for all implants sizes and compatibility with international lines. • MATERIAL: Titanium grade IV. • SURFACE: SLA Zircon®. • PRESENTATION: only available in not mounted version. Cover screw not included. • PROSTHETIC SOLUTIONS: accept a large variety prosthetic components options. Belong to the line the esthetic components and all FlexCone® and mini FlexCone® line. • SPEED DRILLING: 400 a 1.200 rpm. • ROTATION INSERT: 10 a 30 rpm. ø 2,8
• TORQUE INSERTION: 35 a 55 Ncm. ø 3,3
TECHNICAL SPECIFICATIONS ø 2,8
øD 3.5 4.0 4.5 5.0
ø 3,3 øA øD
øA 2.4 3.0 3.4 3.9
INTERNAL MORSE
HEXAGON TECHNICAL SPECIFICATIONS OF IMPLANTS INTERNAL MORSE
HEXAGON
Ø 3.5
Ø 3.75
Ø 4.0
Ø 4.5
Ø 5.0
7.0
50.3507R
50.3707R
50.4007R
50.4507R
50.5007R
8.5
50.3508R
50.3708R
50.4008R
50.4508R
50.5008R
10
50.3510R
50.3710R
50.4010R
50.4510R
50.5010R
11.5
50.3511R
50.3711R
50.4011R
50.4511R
50.5011R
13
50.3513R
50.3713R
50.4013R
50.4513R
50.5013R
15
50.3515R
50.3715R
50.4015R
50.4515R
50.5015R
INTERNAL MORSE HEXAGON CYLINDRICAL
MICRO-THREADS
MODELS AND LENGTHS
Countersink 5.0
Drill 4.3
Drill 3.8
Drill 3.5
Drill 3.3
Drill 3.15
Drill 3.0
Pilot 2.0 / 3.0
Drill 2.8
Spear / screw 2
SEQUENCE OF DRILLS
3.5 mm 3.75 mm See item 2.
4.0 mm
Indicated
4.5 mm
Optional
5.0 mm
DRIVERS
Note: 1 - The last drill isn’t necessary perfurate the total height, being a less measure. 2 - For corticalizado bone type I and II drilling with drill 3mm that only the region corresponding to the micro-threads. This drill will act as the region’s micro thread height 3.5
This implant is connected with a connection driver double hexagon. Its has fit with contra-angle or Torque Wrench (ratchet). 28.5020R
26.5060R
26.5061R
CAPTURE AND TRANSPORT OF IMPLANT 1
2
3
1 - With the Badock take the implant to the grip 2 - Takeoff the badock 3 - Fix the double hexagon connection driver.
M
51
INTERNAL MORSE HEXAGON PROSTHETIC LINE PROSTHETIC LINE
PROSTHETIC SOLUTIONS OVER IMPLANT
INTERNAL MORSE HEXAGON 1.2
1.2 45 Ncm
1.2 15 Ncm
Cover Screw
Open tray impression transfer LONG
Code
Code
51.4001R
59.4001LH
Straight abutment
59.4001LN
Height
Profile 3.5
1
1.2 30 Ncm
Code 55.3512R
1.2
Ø
A L
Open tray impression transfer SHORT Code
Healing
HIM CYLINDRICAL 3.5 3.75 4.0 4.5 5.0
PROSTHETIC SOLUTIONS CEMENTED
59.4001SH
A
L
Ø
Code
1
2
3.3
59.3312R
A
L
Ø
1
2
4.0
Code 59.4012R
59.4001SN 1.2 1.2 45 Ncm
2
2
4.0
59.4022R
2
4
4.0
59.4024R
2
6
4.0
59.4026R
2
8
4.0
59.4028R
2
10
4.0
59.4029R
3
4
4.0
59.4034R
Closed tray impression transfer LONG
4
6
4.0
59.4046R
Code
6
8
4.0
59.4068R
59.4000LH
A
L
Ø
Code
1
2
4.5
59.4512R
2
4
4.5
59.4524R
2
6
4.5
59.4526R
4
6
4.5
59.4546R
A
L
Ø
1
2
5.5
Code 59.5512R
2
4
5.5
59.5524R
2
6
5.5
59.5526R
A
L
Ø
2
4
6.5
Code 59.6524R
4
6
6.5
59.6526R
Anatomical Abutment
1.2
Closed tray impression transfer SHORT Code
A
Ø
1
4.0
Code 55.4011R
2
4.0
55.4012R
3
4.0
55.4013R
PROSTHETIC SOLUTIONS OVERDENTURE
59.4000SH
2.4 35 Ncm 1.2
Screw Code
O’ring abutment Height Code
53.4000R
0
52.4040R
1
52.4041R
2
52.4042R
Analog Code
3
52.4043R
4
52.4044R
51.4000R
5
52.4045R
6
52.4046R
1.2
Lab prosthetic screw Code 53.4000L
INTERNAL MORSE
HEXAGON
S 1.2 45 Ncm
1.2 45 Ncm
1.2 45 Ncm
Angled esthetic abutment
Esthetic abutment Height Profile
CoCr plastic UCLA Code 55.4201H 55.4202N
Code
Height Profile
Angle
Code
1.5
4.5
55.4515R
1
4.5
15
55.4515RA
3
4.5
55.4530R
1
4.5
25
55.4525RA
1.5
5.5
55.5515R
1
5.5
15
55.5515RA
3
5.5
55.5530R
1
5.5
25
55.5525RA
1.5
6.5
55.6515R
3
6.5
55.6530R
S 1.2 45 Ncm
1.2 45 Ncm
Transfer Plastic cylinder
Angled anatomical abutment Height Anatomical Abutment Height Profile
Code
1
5.0
55.5011R
2
5.0
55.5012R
3
5.0
55.5013R
Profile
Angle
Code
1
4
15
55.1551RA
2
4
15
55.1552RA
1
4
25
55.2551RA
2 Height
4
25
55.2552RA
Angle
Code
15
55.1561RA
1
Profile 5
2
5
15
55.1562RA
1
5
25
55.2561RA
2
5
25
55.2562RA
Height Profile
Code
4
4
4.3410I
4
4
4.3410M
6
4
4.3310I
6
4
4.3310M
4
5
4.4410I
4
5
4.4410M
6
5
4.4010I
6
5
4.4010M
Profile
Height
Analog Code
Ø
Height
Code
4
4
4.3490I
4
4
4.3321S
4
6
4.3390I
4
6
4.3321L
Code
Ø
Height
Transfer Profile
Height
Analog Code
5
4
4.4490I
5
4
4.4021S
5
6
4.4090I
5
6
4.4021L
S
Rubber ring Code
Closed keeper Code
Positioner o’ring kit Code
2.4092 Medium
2.4001
2.4094
2.4093 Hard
2.4091 Soft
M
53
INTERNAL MORSE HEXAGON PROSTHETIC LINE PROSTHETIC LINE INTERNAL MORSE HEXAGON
PROSTHETIC SOLUTIONS MINI-FLEXCONE®
1.2
2.2 50 Ncm
1.2 15 Ncm
Open tray impression transfer Code 77.3093 77.3091
1.2
mini-FlexCone® Pillar Healing Cap
Height
Code
1
58.4001R
Code
2
58.4002R
77.3080
3
58.4003R
4
58.4004R
Closed tray impression transfer Code 77.3092 77.3090
PROSTHETIC SOLUTIONS HIM CYLINDRICAL 3.5
FLEXCONE®
3.75 4.0
1.2
4.5 5.0
2.7 60 Ncm
2.7 45 Ncm
2.7 50 Ncm
1.2 15 Ncm
Open tray impression transfer Code 77.3393
FlexCone® Pillar
Multiple FlexCone® Pillar
77.3391
Angled FlexCone® Pillar
Height
Code
Height
Code
1
57.4001R
1
57.4001M
1.5
20
57.2041
2
57.4002R
2
57.4002M
2.5
20
57.2042
3
57.4003R
3
57.4003M
3.5
20
57.2043
4
57.4004R
4
57.4004M
6
57.4006R
6
57.4006M
8
57.4008R
Height Angle Code
Height Angle Code 1.5
30
57.3041
2.5
30
57.3042
Healing Cap
1.2
Code 77.3380
Closed tray impression transfer Code 77.3392 77.3390
INTERNAL MORSE
HEXAGON SCREW-RETAINED
CEMENTED
1.2 35 Ncm
OVERDENTURE
1.2 20 Ncm
1.2 20 Ncm
0.9 20 Ncm 1.2 35 Ncm
Titanium Pillar (UCLA) Code
Cemented metal cylinder SHORT
Cemented metal cylinder LONG
77.3211
Lab prosthetic screw
Code
Code
77.3212
Code
72.3009
72.3011
7.3055
72.3006
72.3012
Analog
1.2 35 Ncm
Code
1.2 20 Ncm
1.2 20 Ncm
CoCr plastic UCLA Code
77.3021
Micro O’ring Pillar and Closed Keeper Code
77.3111
72.3004
77.3112
Screw Code 7.3050
Plastic UCLA Code 77.3011
Cemented plastic cylinder SHORT
Cemented plastic cylinder LONG
Code
Code
72.3008
72.3010
72.3005
72.3007
* Closed Keeper sale apart: Closed keeper code: 2.4001
77.3012
SCREW-RETAINED
CEMENTED
OVERDENTURE
1.2 35 Ncm 1.2 20 Ncm
1.2 20 Ncm
Titanium Pillar (UCLA) Code
1.2 35 Ncm
77.3511 77.3512
Lab prosthetic screw
Cemented metal cylinder SHORT
Cemented metal cylinder LONG
Code
Code
72.3709
72.3711
0.9 20 Ncm
Code 7.7055 1.2 35 Ncm
Analog Code
1.2 20 Ncm
CoCr plastic UCLA Code
1.2 20 Ncm
O’ring Pillar and Closed keeper Code
77.3411
77.3321
77.3412
72.3703
Screw Cemented plastic cylinder SHORT
Cemented plastic cylinder LONG
77.3311
Code
Code
77.3312
72.3708
72.3710
Plastic UCLA Code
Code 7.7050
* Closed keeper sale apart: Closed keeper code: 2.4101
MORSE TAPER CYLINDRICAL • DESIGN: the implant Osteofit® Morse Taper with unique cylindrical body, present a switching plataform with the main prosthetic clamping feature: the cold welding with thread pressure. With this sealing, the peri-implants tissues keep healthy because decreased inflammatory infiltrate. Have an unique prosthetic interface and high mechanical resistence. • MATERIAL: Titanium grade IV. • SURFACE: SLA Zircon®. • PRESENTATION: only available in mounted version.Cover screw not included. • PROSTHETIC SOLUTIONS: the prosthetic-implant sealing of this system is indicated for replacement for single or multiple tooth loss, anywhere in the mounth, since the pillars FlexCone® and Mini FlexCone®, straight or angled, are indicated as the best resolution prosthetic in the market. • SPEED DRILLING: 400 a 1.200 rpm. • ROTATION INSERT: 10 a 30 rpm. • TORQUE INSERTION: 35 a 55 Ncm.
ø 2,5
M 1.8
TECHNICAL SPECIFICATIONS ø 2,5
M 1.8
A
D
øD 3.5 4.0 4.5
øA 2.4 3.0 3.4
MORSE
TAPER TECHNICAL SPECIFICATIONS OF IMPLANTS CONE
Ø 3.5
Ø 4.0
7.0
70.3507
70.4007
70.4507
8.5
70.3508
70.4008
70.4508
10
70.3510
70.4010
70.4510
11.5
70.3511
70.4011
70.4511
13
70.3513
70.4013
70.4513
15
70.3515
70.4015
70.4515
MORSE
Ø 4.5
CONE
MORSE
MODELS AND LENGTHS
Drill 4.3
Drill 3.8
Drill 3.3
Drill 3.0
Pilot 2.0 / 3.0
Drill 2.8
Spear / screw 2
SEQUENCE OF DRILLS
3.5 mm
Countersink driller action
4.0 mm
Indicated
4.5 mm
Optional
Note: For corticalizado bone type I and II suggest this great drilling with drill about 3 mm in depth, only to avoid locking of the implant.
DRIVERS The implant comes in mounted version and should have took with: square contra-angle driver, torque wrench (reatchet) or right with torque wrench (reatchet).
28.4008
28.4006 28.4007
28.4102
CAPTURE AND TRANSPORT OF IMPLANT 1
2
3
1 - With the Badock take the implant to the surgical place 2 - Takeoff the badock 3 - Attach the driver for contra-angle, surgical torque or ratchet wrench with torque.
57
MORSE TAPER CONICAL • DESIGN: the implant Osteofit® Morse Taper with conical body and trapezoidal self-cutting threads thtat promote an great bone cut. Bring the tooth root form, easing the surgery. Presents one switching platform or shift platform with the main feature that is the prosthetic clamping by cold welding with thread pressure. With that sealing, the peri-implant tissues keeping healthy because decreased inflammatory infiltrate. Have an unique and high mechanical resistance interface. Is an indication for immediate placement after extraction. • MATERIAL: Titanium grade IV. • SURFACE: SLA Zircon®. • PRESENTATION: only available in mounted version. Cover screw not included. • PROSTHETIC SOLUTIONS: the clamping prosthetic-implant of that system is indicated for replacement tooth loss single or multiple, anywhere in the mounth. Then the FlexCone® and mini-FlexCone® pillars, straight or angled, are indicated for the best prosthetic solution of the market. • SPEED DRILLING: 400 a 1.200 rpm. • ROTATION INSERT: 10 a 30 rpm. • TORQUE INSERTION: 35 a 55 Ncm. ø 2,5
M 1.8
TECHNICAL SPECIFICATIONS ø 2,5
M 1.8
A
D
øD 3.8 4.3 5.0
øA 2.5 2.8 3.5
MORSE
TAPER TECHNICAL SPECIFICATIONS OF IMPLANTS CONE
Ø 3.8
Ø 4.3
8.5
70.3808
70.4308
70.5008
10
70.3810
70.4310
70.5010
11.5
70.3811
70.4311
70.5011
13
70.3813
70.4313
70.5013
15
70.3815
70.4315
70.5015
MORSE
Ø 5.0
CONE MORSE
CONICAL
MODELS AND LENGTHS
Conical Drill 5.0
Conical Drill 4.3
Spear / Drill 2.5
Conical Drill 3.8
SEQUENCE OF DRILLS
DRILL MEDIUM
3.8 mm
LONG
4.3 mm
HEIGHT 8.5, 10.0 e 11.5 13.0 e 15.0
5.0 mm
DRIVERS
The implant comes in mounted version and should have took with: square contra-angle driver, torque wrench (reatchet) or right with torque wrench (reatchet).
28.4008
28.4006 28.4007
28.4102
CAPTURE AND TRANSPORT OF IMPLANT 1
2
3
1 - With the Badock take the implant to the surgical place 2 - Takeoff the badock 3 - Attach the driver for contra-angle, surgical torque or ratchet wrench with torque.
59
MORSE TAPER PROSTHETIC LINE PROSTHETIC LINE
PROSTHETIC SOLUTIONS
MORSE TAPER
OVER IMPLANT
1.3 45 Ncm
1.2 15 Ncm
CoCr base screw-retained abutment Height Cover Screw Code 71.4001 Analog 1.2 30 Ncm
Profile
Code
0.35
4.8
75.4103
0.70
4.8
75.4107
1.50
4.8
75.4111
2.50
4.8
75.4112
3.50
4.8
75.4113
Code 71.4000
PROSTHETIC SOLUTIONS 1.2
Cylindrical Morse Taper 3.5 4.0 4.5
CEMENTED
1.3 45 Ncm
Straight healing cap Strap Height Profile
Code
1.5
3.5
4.0
79.3321
2.5
4.5
4.0
79.3322
3.5
5.5
4.0
79.3323
1.5
5.5
4.0
79.3341
2.5
6.5
4.0
79.3342
3.5
7.5
4.0
79.3343
1.5
7.5
4.0
79.3361
Height
Angle
Code
2.5
8.5
4.0
79.3362
1.5
74.1531
3.5
9.5
4.0
79.3363
15
2.5
15
74.1532
3.5 Height 1.5
15 Angle 25
74.1533 Code 74.2531
2.5
25
74.2532
3.5
25
74.2533
Open tray impression transfer Anatomical Abutment angled - SLIM
Code 79.4049
1.2
Conical Morse Taper 1.2 30 Ncm
3.8 4.3 5.0
PROSTHETIC SOLUTIONS OVERDENTURE Anatomical healing cap Strap Height Profile
Code
1.5
3.5
4.8
79.4021
2.5
4.5
4.8
79.4022
3.5
5.5
4.8
79.4023
1.5
5.5
4.8
79.4041
2.5
6.5
4.8
79.4042
3.5
7.5
4.8
79.4043
Closed tray impression transfer Code
2.4 35 Ncm
79.4050
O’ring abutment
1.5
7.5
4.8
79.4061
Height
Profile
Code
2.5
8.5
4.8
79.4062
1.5
4.0
72.4041
3.5
9.5
4.8
79.4063
2.5
4.0
72.4042
3.5
4.0
72.4043
MORSE
TAPER
S
S 1.3 45 Ncm
1.3 45 Ncm
1.3 45 Ncm
h
h
Plastic cylinder SLIM Height Code 4 4.3410I
Anatomical Abutment SLIM Anatomical Abutment angled
h
Height
Code
Anatomical Abutment h
Height
Code
4
4.3410M
6
4.3310I
6
4.3310M
Impression Transfer SLIM Height Code
Analog SLIM Ø
Height
Code
4
4.3490I
4
4
4.3321S
6
4.3390I
4
6
4.3321L
Code
Ø
Height
4
0.75
74.3410L
4
0.75
74.4100L
4
1.50
74.3311L
4
1.50
74.4101L
74.1541
4
2.50
74.3312L
4
2.50
74.4102L
15
74.1542
4
3.50
74.3313L
4
3.50
74.4103L
3.5 Height 1.5
15 Angle 25
74.1543 Code 74.2541
h
Height
Code
h
Height
Code
6
0.75
74.3400L
6
0.75
74.4000L
2.5
25
74.2542
6
1.50
74.3301L
6
1.50
74.4001L
4
4.4410M
6
2.50
74.4002L
6
4
4.4021S
74.2543
74.3302L
5
25
2.50
4.4490I
3.5
6
4
4.4010I
6
3.50
74.3303L
6
3.50
74.4003L
6
4.4090I
6
5
6
4.4021L
4.4010M
Height
Angle
Code
1.5
15
2.5
Plastic cylinder Height Code 4 4.4410I
Analog
Impression Transfer Height
S
Closed Keeper Code
Positioner o’ring kit Code
2.4001
2.4094
Rubber ring Code 2.4091 Soft 2.4092 Medium 2.4093 Hard
61
Code
MORSE TAPER PROSTHETIC LINE PROSTHETIC LINE MORSE TAPER
PROSTHETIC SOLUTIONS MINI-FLEXCONE®
2.2 45 Ncm
mini-FlexCone® Pillar Height
Code
0.75
78.4000
1.50
78.4001
2.50
78.4002
3.50
78.4003
1.2
1.2
1.2 15 Ncm
Healing Cap
Open tray impression transfer
Code 77.3080
Closed tray impression transfer
Code
Code
77.3093
77.3092
PROSTHETIC SOLUTIONS FLEXCONE® CYLINDRICAL MORSE TAPER
2.7 45 Ncm
1.2 45 Ncm
2.7 45 Ncm
1.2
3.5 4.0
1.2 15 Ncm
4.5
Open tray impression transfer Code
FlexCone® Pillar
CONICAL MORSE TAPER
Height
Code
0.30
77.4100
0.75
77.4000
1.50
77.4001
2.50
77.4002
3.50
77.4003
FlexCone® Pillar
77.3391
Height Angle Code
Height
Code
1.5
15
77.2041
0.30
77.4100M
2.5
15
77.2042
0.75
77.4000M
Code
3.5
15
77.2043
1.50
77.4001M
77.3380
2.50
77.4002M
3.50
77.4003M
Height Angle Code
3.8
77.3393
Multiple FlexCone® Pillar
1.5
25
77.3041
2.5
25
77.3042
Healing Cap 1.2
Closed tray impression transfer Code
4.3
77.3392
5.0
77.3390
PROSTHETIC SOLUTIONS CONICAL MINI PILLAR 2.0 30 Ncm 1.2 15 Ncm
1.2
1.2
Conical Mini Pillar Height
Code
0.30
76.4100
0.75
76.4000
1.50
Code
76.4001
Code
Code
2.50
6.4080
76.4002
6.4091
6.4090
3.50
76.4003
Healing Cap
Open tray impression transfer
Closed tray impression transfer
MORSE
TAPER SCREW-RETAINED
OVERDENTURE
CEMENTED
1.2 35 Ncm
1.2 20 Ncm
1.2 20 Ncm
1.2
0.9 20 Ncm 1.2 35 Ncm
Titanium Pillar (UCLA)
Lab prosthetic screw Code
Code
7.3055
77.3211
Analog Code
Cemented metal cylinder LONG Code
Code
72.3011
72.3009
Micro O’ring Pillar 1.2 20 Ncm
CoCr plastic UCLA
1.2 35 Ncm
Cemented metal cylinder SHORT
1.2 20 Ncm
1.2
Code
* Closed Keeper sale apart: Closed Keeper code: 2.4001
77.3111
77.3021 Plastic UCLA Code
Screw Code
77.3011
7.3050
Cemented plastic cylinder SHORT Code
Code 72.3010
Cemented metal cylinder SHORT
1.2 35 Ncm
Code
Lab prosthetic screw Code
77.3511
CoCr plastic UCLA Code
1.2 35 Ncm
1.2 20 Ncm
72.3711 1.2 20 Ncm
1.2 20 Ncm
1.2
O’ring Pillar Code
77.3411
77.3321
0.9 20 Ncm
Cemented metal cylinder LONG Code
72.3709
7.7055
77.3512
Code
1.2 20 Ncm
1.2
Code
OVERDENTURE
CEMENTED
1.2 35 Ncm
Analog
Cemented plastic cylinder LONG
72.3008
SCREW-RETAINED
Titanium Pillar (UCLA)
Code 72.3004
72.3703
77.3412
Screw Code
Plastic UCLA Code
7.7050
Cemented plastic cylinder SHORT
Cemented plastic cylinder LONG
77.3311
Code
Code
77.3312
72.3708
72.3710
* Closed keeper sale apart: Closed keeper code: 2.4101
IMEDIATE
PASSIVE SEATING 1.2 15 Ncm
1.2 15 Ncm
1.2 15 Ncm
Titanium Pillar (UCLA) Analog Code
1.2 30 Ncm
Analog
1.2 15 Ncm
Code 6.4022
Code
Code
6.4212
6.4021
Lab prosthetic screw 6.4055
1.2 15 Ncm
CoCr plastic UCLA Code
1.2 15 Ncm
6.4112
Titanium
1.2 30 Ncm
Code 6.4062 Plastic
Plastic UCLA Code 6.4012
Code
Screw Code
6.4031
6.4050
MORSE TAPER HEXAGONAL • DESIGN: the implant Osteofit® CMH combines internal hexagon connection with the same cone 40 of the mini-pillar, for example allowing the connection of a prosthesis on implants protocol directly without the need to use intermediate angled prosthetic components. This implant follows the same surgical and prosthetic protocols of external hexagon. Have a trapezoidal conical thread at your inside profile and cylindrical at external, but use in surgery the common cylindrical drills. • MATERIAL: Titanium grau IV. • SURFACE: SLA Zircon®. • PRESENTATION: only available in not mounted version. Cover screw not included. • PROSTHETIC SOLUTIONS: A wide variety of pillars produce excellent esthetics and prosthetic solutions for each situation, single or multiple, cemented or screw-retained prostheses. • SPEED DRILLING: 400 a 1.200 rpm • ROTATION INSERT: 10 a 30 rpm ØC
• TORQUE INSERTION: 35 a 55 Ncm SW
M
TECHNICAL SPECIFICATIONS ØC
SW
ØC
A D
M
SW
M
øP 3.3 3.75 4.0 5.0
øA 2.4 2.7 3.0 4.0
øC 3.3 3.5 3.5 3.5
SW 2.4 2.5 2.5 2.5
M 1.8 2.0 2.0 2.0
MORSE TAPER
HEXAGONAL TECHNICAL SPECIFICATIONS OF IMPLANTS SLIM
MORSE TAPER
HEXAGONAL
MORSE TAPER
03.3
Ø 3.75
HEXAGONAL
Ø 4.0
Ø 5.0
CONE MORSE
CONE MORSE
HEXAGONAL
HEXAGONAL SLIM
7.0
7.0
60.4007
60.5007
8.5
60.3308
8.5
60.3708
60.4008
60.5008
10
60.3310
10
60.3710
60.4010
60.5010
11.5
60.3311
11.5
60.3711
60.4011
60.5011
13
60.3313
13
60.3713
60.4013
60.5013
15
60.3315
15
60.3715
60.4015
60.5015
17
60.3317
17
60.3717
60.4017
MODELS AND LENGTHS
MODELS AND LENGTHS
Countersink 5.0
Drill 4.3
Drill 3.8
Drill 3.5
Drill 3.3
Drill 3.15
Drill 3.0
Pilot 2.0 / 3.0
Drill 2.8
Drill 2.5
Spear / screw 2
SEQUENCE OF DRILLS
3.3 mm 3.75 mm 4.0 mm
Indicated
5.0 mm
Optional Note: 1 - It is suggested that the last drill is not used to drill overall height of the implant, but a depth of about 3mm.
DRIVERS For 3.3
For 3.75, 4.0, 4.3 and 5.0
This implant is connected with a connection driver internal hexagon. Its has fit with contra-angle or Torque Wrench (ratchet).
26.5050
26.5057 26.5058
26.5051 26.5060 26.5061
CAPTURE AND TRANSPORT OF IMPLANT 1
2
3
1 - With the Badock take the implant to the grip 2 - Takeoff the badock 3 - Fix an internal hexagon connection driver
65
MORSE TAPER HEXAGONAL CRESTAL LEVEL • DESIGN: the implant Osteofit® CMH link the internal connection hexagon with the same 40º cone that mini-pillar, allowing for example the straight protocol prosthesis connection over implants, without the necessity of use intermediate angled prosthetic components. This implant follow the same surgical and prosthetic protocols of external hexagon. Have a conical trapezoidal thread at your internal profile and cylindrical at external. Have a micro-thread at cervical implant region that improve the primary stability and prevent the bone loss. Your instalation must be intraosseous or bone level, because the full treatment of implant surface. Never let above bone level. • MATERIAL: Titanium grau IV. • SURFACE: SLA Zircon®. • PRESENTATION: only available in not mounted version. Cover screw not included. • PROSTHETIC SOLUTIONS: A wide variety of pillars procuce a great esthetic and prosthetic solutions for each case, being single or multiple, cemented or screwed. • SPEED DRILLING: 400 a 1.200 rpm • ROTATION INSERT: 10 a 30 rpm Ø 3.5
SW 2.5
M 2.0
• TORQUE INSERTION: 35 a 55 Ncm
TECHNICAL SPECIFICATIONS
Ø 3.5
SW 2.5
Ø 3.5 A D
M 2.0 SW 2.5
M 2.0
øD 3.75 4.0 4.3 5.0
øA 2.7 3.0 3.3 4.0
MORSE TAPER
HEXAGONAL TECHNICAL SPECIFICATIONS OF IMPLANTS CRESTAL
Ø 3.8
LEVEL
Ø 4.0
Ø 4.3
Ø 5.0
CRESTAL LEVEL
7.0
60.3807C
60.4007C
60.4307C
60.5007C
8.5
60.3808C
60.4008C
60.4308C
60.5008C
10
60.3810C
60.4010C
60.4310C
60.5010C
11.5
60.3811C
60.4011C
60.4311C
60.5011C
13
60.3813C
60.4013C
15
60.3815C
60.4015C
MODELS AND LENGTHS
Countersink 5.0
Drill 4.3
Drill 3.8
Drill 3.5
Drill 3.3
Drill 3.15
Drill 3.0
Pilot 2.0 / 3.0
Spear / screw 2
SEQUENCE OF DRILLS
3.25 mm 4.0 mm 4.3 mm
Ver item 2. Indicated
5.0 mm
DRIVERS
Optional Obs: 1 - A última broca não é necessário perfurar a altura total sendo uma medida a menos. 2 - Em osso corticalizado tipo I e II, sugere-se empregar a broca assinalada com uma profundidade de 3mm para evitar o travamento do implante devido as micro-roscas.
This implant is connected with a connection driver internal hexagon. Its has fit with contra-angle or Torque Wrench (ratchet).
26.5051
26.5060 26.5061
CAPTURE AND TRANSPORT OF IMPLANT 1
2
3
1 - With the Badock take the implant to the grip 2 - Takeoff the badock 3 - Fix an internal hexagon connection driver
67
MORSE TAPER HEXAGONAL PROSTHETIC LINE
PROSTHETIC LINE
PROSTHETIC SOLUTIONS
MORSE TAPER HEXAGONAL - SLIM
OVER IMPLANT
1.2
1.3 45 Ncm 1.2 15 Ncm
Analog Code
Straight Abutment
61.3300
Cover Screw Code
Height Profile Code 3.3
1
61.3301
65.3312
1.2
1.2 30 Ncm
PROSTHETIC SOLUTIONS Open tray impression transfer Straight healing cap Height
Profile
Code
2
3.3
69.3332
CMH 3.3 - SLIM
3
3.3
69.3333
3.3
4
3.3
69.3334
6
3.3
69.3336
1.2 30 Ncm
CEMENTED
Code 69.3301 1.3 45 Ncm
1.2
Closed tray impression transfer Code 69.3300
Anatomical Abutment Height Profile Code 1
4
64.3301N
2
4
64.3302N
3
4
64.3303N
Anatomical healing cap Height
Profile
2
4.0
Code 69.3342
3
4.0
69.3343
4
4.0
69.3344
8
4.0
69.3348
PROSTHETIC SOLUTIONS Lab prosthetic screw
OVERDENTURE
Code 3.3350
2.4 35 Ncm
O’ring abutment Screw Code
Height 1
Code 62.3341
2
62.3342
3.3310
3
62.3343
3.3300
4
62.3344
5
62.3345
MORSE TAPER
HEXAGONAL
NS
1.3 45 Ncm
1.3 45 Ncm
1.3 45 Ncm
Titanium Pillar (UCLA)
CoCr plastic UCLA
Plastic UCLA Code
Code
Code
63.3301
65.3501
63.3302
65.3502
65.3310 65.3410
NS
1.3 45 Ncm
1.3 45 Ncm
Angled abutment Height Angle Code
Angled abutment Height Angle Code
1
15
62.1531N
1
25
62.2531N
2
15
62.1532N
2
25
62.2532N
3
15
62.1533N
3
25
62.2533N
Analog
Plastic cylinder
Impression Transfer SLIM
Height
Code
Height
Code
Code
4
4.3410I
4
4.3321S
4
.4.3490I
4
4.3410M
6
4.3321L
6
4.3390I
6
4.3310I
6
4.3310M
Height
NS
Rubber ring Closed Keeper
Positioner o’ring kit
Code
Code
Code
2.4091 Soft
2.4001
2.4094
2.4092 Medium 2.4093 Hard
69
MORSE TAPER HEXAGONAL PROSTHETIC LINE
PROSTHETIC LINE CMH - 3.3 - SLIM
PROSTHETIC SOLUTIONS CONICAL MINI PILLAR
1.2
2.0 30 Ncm
Open tray impression transfer 1.2 15 Ncm
Code 6.4091
Healing Cap
Conical Mini Pillar Height
Code
Code
1
66.3401
2
66.3402
3
66.3403
1.2
6.4080
Closed tray impression transfer Code 6.4090
CMH 3.3 - SLIM 3.3
PROSTHETIC SOLUTIONS CONICAL PILLAR
1.2
2.0 30 Ncm
1.2 15 Ncm
Open tray impression transfer Code 7.3391
Conical Pillar Height
Code
1
67.3301
2
67.3302
3
67.3303
Healing Cap Code 1.2
7.3380
Closed tray impression transfer Code 7.3390
MORSE TAPER
HEXAGONAL 1.2 15 Ncm
1.2 15 Ncm
Titanium Pillar (UCLA)
1.2
1.2
Code 6.4212 Analog Code
1.2 15 Ncm
6.4021
CoCr plastic UCLA Code
Code
Lab prosthetic screw Code
6.4050
6.4055
Screw
6.4112
Plastic UCLA Code 6.4012
1.2 15 Ncm
1.2 15 Ncm
Titanium Pillar (UCLA) Code
1.2
1.2
7.3511
1.2 15 Ncm
Analog
CoCr plastic UCLA
Code
Code
7.3321
7.3411
Plastic UCLA Code 7.3311
Code
Lab prosthetic screw Code
7.4050
7.4055
Screw
MORSE TAPER HEXAGONAL PROSTHETIC LINE
PROSTHETIC LINE
PROSTHETIC SOLUTIONS
CMH 4.0 E CRESTAL LEVEL
OVER IMPLANT
1.3 45 Ncm 1.2 15 Ncm
Analog Profile
Code
4.0
61.4000
Straight Abutment
Cover Screw Code
Height Profile Code
61.4001
1.2
4.0
1
65.4012
1.2 30 Ncm
PROSTHETIC SOLUTIONS
CMH 4.0 3.75 4.0 5.0
Straight healing cap Height
Profile
Code
2
4.0
69.4042
3
4.0
69.4043
4
4.0
69.4044
6
4.0
69.4046
CEMENTED
Open tray impression transfer Code 69.4001 69.4003
1.3 45 Ncm 1.2
1.2 30 Ncm
CMH 4.0 - CRESTAL LEVEL 3.75
Anatomical Abutment
4.0
Closed tray impression transfer Code
4.3 5.0
Anatomical healing cap Height 2
Profile 5.0
Code 69.4052
3
5.0
69.4053
4
5.0
69.4054
6
5.0
69.4056
Height Profile
Code
1
5.0
64.4001N
69.4000
2
5.0
64.4002N
69.4002
3
5.0
64.4003N
PROSTHETIC SOLUTIONS OVERDENTURE
2.4 40 Ncm
Lab prosthetic screw Code 3.4050
O’ring abutment Height
Code
1
62.4041
2
62.4042
3
62.4043
3.4010
4
62.4044
3.4000
5
62.4045
Screw Code
MORSE TAPER
HEXAGONAL
NS
1.3 45 Ncm
1.3 45 Ncm
1.3 45 Ncm
Titanium Pillar (UCLA)
Ucla base CrCo
Plastic UCLA Code
Code
Code
63.4001
65.4201
65.4010
63.4002
65.4202
65.4110
NS
1.3 45 Ncm
1.3 45 Ncm
Angled abutment Height Angle Code
Height Angle Code
1
15
62.1541N
1
25
62.2541N
2
15
62.1542N
2
25
62.2542N
3
15
62.1543N
3
25
62.2543N
Plastic cylinder
Impression Transfer SLIM
Angled abutment
Height
Code
4
4.4490I
6
4.4090I
Height
Code
Analog Height
Code
4
4.4410I
4
4.4021S
4
4.4410M
6
4.4021L
6
4.4010I
6
4.4010M
NS
Rubber ring Closed Keeper
Positioner o’ring kit
Code
Code
Code
2.4091 Soft
2.4001
2.4094
2.4092 Medium 2.4093 Hard
73
MORSE TAPER HEXAGONAL PROSTHETIC LINE
PROSTHETIC LINE
CMH 4.0 E CRESTAL LEVEL
PROSTHETIC SOLUTIONS MINI FLEXCONE速
2.2 50 Ncm 1.2
1.2
1.2 15 Ncm
Mini FlexCone速 Height
Code
1
68.4001
2
68.4002
3
68.4003
4
68.4004
5
68.4005
Code
Open tray impression transfer Code
Closed tray impression transfer Code
77.3080
77.3093
77.3092
Healing Cap
PROSTHETIC SOLUTIONS FLEXCONE速 CMH 4.0 3.75
2.7 60 Ncm
4.0
1.2
5.0
1.2
1.2 15 Ncm
FlexCone速
Healing Cap
Height
Code
1
67.4001F
Code
CMH 4.0 - CRESTAL LEVEL
2
67.4002F
77.3380
3.75
3
4.0
4
4.3
5
67.4005F
Open tray impression transfer Code
Closed tray impression transfer Code
67.4003F
77.3393
77.3392
67.4004F
77.3391
77.3390
5.0
PROSTHETIC SOLUTIONS CONICAL MINI PILLAR 2.0 30 Ncm 1.2
1.2 1.2 15 Ncm
Conical Mini Pillar
Healing Cap
Height
Code
Code
1
66.4101
6.4080
2
66.4102
3
66.4103
4
66.4104
5
66.4105
Open tray impression transfer
Closed tray impression transfer
Code
Code
6.4091
6.4090
n
MORSE TAPER
HEXAGONAL SCREW-RETAINED
OVERDENTURE
CEMENTED
1.2 35 Ncm
1.2 20 Ncm
1.2
1.2 20 Ncm 1.2 20 Ncm
1.2 35 Ncm
Titanium Pillar (UCLA)
Lab prosthetic screw Code
Code
7.3055
77.3211
Analog Code
Cemented metal cylinder LONG Code
Code
72.3011
72.3009
O’ring Pillar 1.2 20 Ncm
CoCr plastic UCLA
1.2 35 Ncm
Cemented metal cylinder SHORT
1.2 20 Ncm
1.2
Code
* Closed keeper sale apart: Closed keeper code: 2.4001
77.3111
77.3021
Code 72.3004
Plastic UCLA Code
Screw Code
77.3011
7.3050
Cemented plastic cylinder SHORT
Cemented plastic cylinder LONG
Code
Code
72.3008
72.3010
SCREW-RETAINED
OVERDENTURE
CEMENTED
1.2 35 Ncm
1.2 20 Ncm
1.2
1.2 20 Ncm
1.2 35 Ncm
Cemented metal cylinder SHORT
Titanium Pillar (UCLA)
Code
Lab prosthetic screw Code
Code 77.3511
CoCr plastic UCLA
77.3512
20 Ncm
Cemented metal cylinder LONG Code
72.3709
72.3711
7.7055
Code
Analog
77.3411
1.2 35 Ncm
Code
77.3412
1.2 20 Ncm
1.2 20 Ncm
1.2
Micro O’ring Pillar Code 72.3703
77.3321 Screw Code
Plastic UCLA Code
7.7050
Cemented plastic cylinder SHORT
Cemented plastic cylinder LONG
77.3311
Code
Code
77.3312
72.3708
72.3710
* Closed keeper sale apart: Closed keeper code: 2.4101
IMEDIATE
PASSIVE SEATING 1.2 15 Ncm
1.2 15 Ncm
Analog
Titanium Pillar (UCLA) Analog Code
30 Ncm
1.2 15 Ncm
1.2 15 Ncm
Code 6.4022
Code
Code
6.4212
6.4021
Lab prosthetic screw 6.4055
1.2 15 Ncm
1.2 15 Ncm
CoCr plastic UCLA Code
Titanium 30 Ncm
Code
6.4112
6.4062 Plastic Plastic UCLA Code 6.4012
Screw
Code
Code
6.4031
6.4050
MORSE TAPER FRICTIONAL SLIM • DESIGN: the implant Osteofit® CMF SLIM have a exclusive design. Present auto-cutting threads that helps on bone cut, double threads at third medium and cervical that helps on primary stability and increase the osseointegration surface. Have a facet of the apex court in direction helical progressive cut that facilitates the insertion of the implant. As the main difference from other fine implants, the implant is not monoblock and allows interchangeability of the model in the line prosthetic and esthetic improvement. This implant receives the prosthetic component by friction beat with special instrument 28.2000. Indicated only for replacing the mandibular incisors and maxillary lateral incisor. • MATERIAL: Titanium grade IV. • SURFACE: SLA Zircon®. • PRESENTATION: only available in not mounted version. Cover screw not included. • PROSTHETIC SOLUTIONS: Simplified line with esthetic solutions for intelligent resolutions cemented, screwed or overdenture. • SPEED DRILLING: 400 a 1.200 rpm; Ø 2.8
• ROTATION INSERT: 10 a 30 rpm; Ø 2.0
• TORQUE INSERTION: 35 a 55 Ncm.
TECHNICAL SPECIFICATIONS Ø 2.8 Ø 2.0
Ø 1.5
MORSE
TAPER
FRICTIONAL TECHNICAL SPECIFICATIONS OF IMPLANTS MORSE TAPER
Ø 2.8
FRICTIONAL MORSE TAPER FRICTIONAL SLIM
10
70.2810F
11.5
70.2811F
13
70.2813F
15
70.2815F
17
70.2817F
2
1
3
MODELS AND LENGTHS
GROOVE INTRA APEX IMPLANT
SEQUENCE OF DRILLS
SACA COVER THREADED
Spear / Helicoidal 2.5
Spear / Helicoidal 2
4
COVER METALLIC
5 Ø 2.8
FITTING WITH INDEX FITPLUS (8 SIDES POSITIONING)
2.8 mm
ONE OF MINORS DIAMETER OF MARKET
Indicated for the region coronary depth 4.5 mm
DRIVERS This implant is connected with a connection driver FitPlus®. Its has fit with contra-angle or Torque Wrench (ratchet). Your cover is withdrawn with drivers screws in clockwise rotation.
26.5051F 26.5060F 26.5061F
26.5062F
CAPTURE AND TRANSPORT OF IMPLANT 1
2
3
1 - With the Badock take the implant to the grip 2 - Takeoff the badock 3 - Fix the internal connection driver Fitplus®.
77
MORSE TAPER FRICTIONAL REGULAR
SHORT
• DESIGN: the implant Osteofit® CMF have a exclusive design. Present auto-cutting threads that helps on bone cut, double threads at third medium and cervical that helps on primary stability and increase the osseointegration surface. Have a facet of the apex court in direction helical progressive cut that facilitates the insertion of the implant. As a main diference between other short implants, the implant CMF SHORT is not monoblock and allows interchangeability of the model in the line prosthetic and an esthetic improvement. The implants CMF SHORT and REGULAR receives the prosthetic component by friction beat with special instrument 28.2000. CMF SHORT is recommended for posterior teeth (maxilla or mandible) where the bone plate has a small vertical dimension. • MATERIAL: Titanium grade IV. • SURFACE: SLA Zircon®. • PRESENTATION: only available in not mounted version. Cover screw not included. • PROSTHETIC SOLUTIONS: Simplified line with esthetic solutions for intelligent resolutions cemented, screwed or overdenture. • SPEED DRILLING: 400 a 1.200 rpm; • ROTATION INSERT: 10 a 30 rpm; • TORQUE INSERTION: 35 a 55 Ncm. ØD Ø 2.5
TECHNICAL SPECIFICATIONS ØD
øD 4.0 4.5 5.0
Ø 2.5
A
øA 2.6 3.1 3.6
MORSE
TAPER
FRICTIONAL TECHNICAL SPECIFICATIONS OF IMPLANTS MORSE TAPER
Ø 4.0
FRICTIONAL
Ø 4.5
MORSE TAPER
Ø 5.0
Ø 3.5
FRICTIONAL
MORSE TAPER FRICTIONAL
Ø 3.75
MORSE TAPER FRICTIONAL
SHORT
1
GROOVE INTRA APEX IMPLANT
REGULAR
2
5.5
70.4005F
70.4505F
70.5005F
8.5
70.3508F
70.3708F
7
70.4007F
70.4507F
70.5007F
10
70.3510F
70.3710F
11.5
70.3511F
70.3711F
13
70.3513F
70.3713F
15
70.3515F
70.3715F
MODELS AND LENGTHS
SACA COVER THREADED
3
MODELS AND LENGTHS
SEQUENCE OF DRILLS Countersink 5.0
Drill 4.3
Drill 3.8
Drill 3.5
Drill 3.3
Drill 3.15
Drill 3.0
Pilot 2.0 / 3.0
Drill 2.8
Spear / screw 2
COVER METALLIC
3.5 mm
4
FITTING WITH INDEX FITPLUS (8 SIDES POSITIONING)
3.75 mm 4.0 mm 4.5 mm 5.0 mm Indicated
DRIVERS
Optional
This implant is connected with a connection driver FitPlus®. Its has fit with contra-angle or Torque Wrench (ratchet). Your cover is withdrawn with drivers screws in clockwise rotation.
26.5052F 26.5063F 26.5064F
26.5062F
CAPTURE AND TRANSPORT OF IMPLANT 1
2
3
1 - With the Badock take the implant to the grip 2 - Takeoff the badock 3 - Fix the internal connection driver Fitplus®.
79
MORSE TAPER FRICTIONAL PROSTHETIC LINE PROSTHETIC SOLUTIONS
PROSTHETIC LINE
MINI-ABUTMENT CEMENTED
CMF SLIM - 2.8
1.2
Angled anatomical abutment Height
Angle
Code
Height
Code
1.5
8
72.0821F
1.5
72.3401F
2.5
8
72.0822F
2.5
72.3402F
3.5
8
72.0823F
3.5
72.3403F
Height
Angle
Code
1.5
15
72.1521F
2.5
15
72.1522F
3.5
15
72.1523F
Anatomical Abutment 1.2
Cover Screw Code
Analog Code
71.3301F
71.3300F
PROSTHETIC SOLUTIONS MINI FLEXCONE®
1.2
CMF SLIM 2.8
Straight healing cap Height 1.5
Profile 2
Code 79.3321F
2.5
2
79.3322F
3.5
2
79.3323F
2.2 1.2 20 Ncm
Closed tray impression transfer
O
Code 79.3349F
MINI FLEXCONE®
Healing Cap
Height
Code
Code
1.5
78.4001F
77.3080
2.5
78.4002F
3.5
78.4003F
Clo
CONE
MORSE
FRICTIONAL
Transfer
Plastic cylinder
Code
Code
Analog Code
4.2890
4.2810
4.2821
1.2 1.2 35 Ncm
1.2 20 Ncm
1.2 20 Ncm 1.2
Titanium Pillar (UCLA) Code
Open tray impression transfer Code
1.2 35 Ncm
77.3211
Code
77.3212
77.3093
Parafuso de trabalho 7.3055
Cemented metal cylinder SHORT Code
Cemented metal cylinder LONG Code
72.3009
72.3011
72.3006
72.3012
77.3091
Pilar Micro O’ring e Anel metálico
CoCr plastic UCLA 1.2
Code Analog
1.2 20 Ncm
1.2 20 Ncm
1.2
77.3111
Code
1.2 35 Ncm
77.3021
77.3112 * Closed keeper sale apart: Closed keeper code: 2.4001
Code 7.3050
Cemented plastic cylinder SHORT
Cemented plastic cylinder LONG
Closed tray impression transfer Code
Code
Code
Code
77.3011
72.3008
72.3010
77.3092
77.3012
72.3005
72.3007
77.3090
Code 72.3004
Parafuso definitivo
Plastic UCLA
1.2 20 Ncm
MORSE TAPER FRICTIONAL PROSTHETIC LINE PROSTHETIC SOLUTIONS
PROSTHETIC LINE
CEMENTED ABUTMENT
CMF SHORT
Angled anatomical abutment
Anatomical Abutment
Height
Angle
Code
1.5
72.4001F
1.5
15
72.1541F
2.5
72.4002F
2.5
15
72.1542F
3.5
72.4003F
3.5
15
72.1543F
Height
1.2
Code
PROSTHETIC SOLUTIONS FLEXCONE® LINE Analog
Cover Screw Code CMF SHORT
2.7
Code
2.7
71.4000F
71.4001F
4.0
1.2 20 Ncm
4.5 5.0
Pilar FlexCone® angulado Height Angle Code
Pilar FlexCone® 1.2
Height
Code
1.5
15
77.1541F
1.5
77.4001F
2.5
15
77.1542F
2.5
77.4002F
3.5
15
77.1543F
3.5
77.4003F
Code
Height
Angle
Code
77.3380
1.5
25
77.2541F
2.5
25
77.2542F
Healing Cap
CMF REGULAR 3.5 3.75
Anatomical healing cap Height
Profile
Code
1.5
4.0
79.4021F
2.5
4.0
79.4022F
3.5
4.0
79.4023F
Closed tray impression transfer Code 79.4050F
PROSTHETIC SOLUTIONS CONICAL MINI PILLAR 2.0
Conical Mini Pillar
2.0
Angled abutment Height Angle Code
Height
Code
1.5
15
76.1541F
1.5
76.4001F
2.5
15
76.1542F
2.5
76.4002F
3.5
15
76.1543F
3.5
76.4003F
Height
Angle
Code
1.5
25
76.2541F
2.5
25
76.2542F
CONE
MORSE
FRICTIONAL
Plastic cylinder Height
Transfer Height
4
Code 4.4410I
4
4
4.4410M
6
6
4.4010I
6
4.4010M
Analog
Code
Height
Code
4.4490I
4
4.4021S
4.4090I
6
4.4021L
CEMENTED
SCREW-RETAINED 1.2 35 Ncm
1.2
1.2
1.2 20 Ncm
OVERDENTURE
1.2 20 Ncm
1.2 20 Ncm
Open tray impression transfer Code
Titanium Pillar (UCLA) Code
77.3393
77.3511
77.3391
77.3512 Analog
1.2 35 Ncm
Lab prosthetic screw Code
Code
CoCr plastic UCLA Code
77.3321
Provisional Cylinder LONG Code
72.3709
72.3711
7.7055
1.2 35 Ncm
1.2
Provisional Cylinder SHORT Code
1.2 20 Ncm
1.2 20 Ncm
MIni O’ring Pillar and Closed Keeper
1.2
Code
77.3411 77.3412 Closed tray impression transfer Code
Screw
Plastic UCLA
77.3392
Code
Code
77.3311
7.7050
Calcinable Cylinder SHORT Code
Calcinable Cylinder LONG Code
72.3708
72.3710
72.3703 * Closed Keeper sale apart: Closed keeper code: 2.4101
77.3312
77.3390
IMEDIATE
PASSIVE SEATING 1.2
1.2 15 Ncm
1.2 15 Ncm
1.2
1.2 20 Ncm
Analog
Open tray impression transfer Code
6.4022
6.4091 Healing Cap
1.2 15 Ncm
Code
Titanium Pillar (UCLA) Code
Lab prosthetic screw Code
6.4212 1.2
6.4055
Analog
Code
Code
6.4080
6.4021
1.2 15 Ncm
1.2 15 Ncm
Titanium
Closed tray impression transfer Code
Plastic
CoCr plastic UCLA 1.2
Code
Code
6.4112
6.4062
6.4090
1.2 15 Ncm
Plastic UCLA
Code
Code
6.4031
6.4012
Screw Code 6.4050
FLEX CONE® SLIM • DESIGN: the implant Osteofit® FC SLIM present a unique conical trapezoidal thread that are auto-cutting (Ø 2.5). Your main feature is your form that allow multiple prosthetic solutions. Apply where there is a very large restriction of bone walls. Indicated for very thin alveolar bone. • MATERIAL: Titanium grade IV. • SURFACE: SLA Zircon®. • PRESENTATION: Only available in mounted version. Cover screw not included. • PROSTHETIC SOLUTIONS: Complete line FlexCone® could be screw-retained, cemented or overdenture. • SPEED DRILLING: 400 a 1.200 rpm; • ROTATION INSERT: 10 a 30 rpm; • TORQUE INSERTION: 35 a 55 Ncm.
M 1.8 2,6
TECHNICAL SPECIFICATIONS ø 4,0
M 1.8 2,6
ø 4,0
1,8 2,5
FLEX
CONE TECHNICAL SPECIFICATIONS OF IMPLANTS FLEX
Ø 4.0
CONE®
1 2,6
2
2,6
2,6
FLEXCONE® SLIM
ø 4,0
ø 4,0
ø 4,0
10
17.2510
11.5
17.2511
13
17.2513
15
17.2515
17
17.2517
Same height than conical mini pillar
Restricted areas
4
3
MODELS AND LENGTHS
1,8
1,8
1,8
1,8
2,51,8
2,5
2,51,8
2,5
2,5
SEQUENCE OF DRILLS
2,5
Screw-retained
6
5
Spear 2.0
Drill 1.6
Lesser thread of the market for dental implants
2.5 mm
Indicated
Cemented
Optional
O’ring
CHAVES This implant comes in a mounted version and must be captured with drivers connections: against angle, wrench (ratchet) or directly with the torque wrench. 28.4008
28.4006 28.4007
28.4002 28.4102
CAPTURE AND TRANSPORT OF IMPLANT 1
2
3
1 - With the Badock take the implant to the surgical place 2 - Takeoff the badock 3 - Attach the driver for against angle, surgical torque or ratchet wrench with torque.
85
FLEX CONE® REGULAR
SHORT
• DESIGN: the implant Osteofit® FC SHORT or FC REGULAR present a conical thread that could be used like a implant when there are restrictions of bone plate height. Your prosthetic line avoid the intermediate, because that is monoblock. Could be used like a multiple or single implant. Immediate loading can be applied, but you must take care of masticatory forces. • MATERIAL: Titanium grade IV. • SURFACE: SLA Zircon®. • PRESENTATION: Only available in mounted version. Cover screw not included. • PROSTHETIC SOLUTIONS: Complete line FlexCone® could be screw-retained, cemented or overdenture. • SPEED DRILLING: 400 a 1.200 rpm; • ROTATION INSERT: 10 a 30 rpm; • TORQUE INSERTION: 35 a 55 Ncm.
M 1.8 2,6
TECHNICAL SPECIFICATIONS ø 4,0
M 1.8 2,6
ø 4,0
øA øD
øD 3.8 4.3 5.0
øA 2.5 2.8 3.5
FLEX
CONE® TECHNICAL SPECIFICATIONS OF IMPLANTS FLEX
Ø 3.8
CONE
®
Ø 4.3
FLEX
Ø 3.8
Ø 4.3
Ø 5.0
8.5
17.3808
17.4308
17.5108
10
17.3810
17.4310
17.5110
11.5
17.3811
17.4311
17.5111
13
17.3813
17.4313
17.5113
15
17.3815
17.4315
17.5115
CONE®
Ø 5.0
FLEXCONE® REGULAR
FLEXCONE® SHORT
5.0
17.3805
17.4305
17.5005
6.0
17.3806
17.4306
17.5006
7.0
17.3807
17.4307
17.5007
MODELS AND LENGTHS
MODELS AND LENGTHS
Conical Drill 5.0
Conical Drill 4.3
Drill 3.8
Spear/Helicoidal 2.5
SEQUENCE OF DRILLS
DRILL
HEIGHT
3.8 mm
SHORT
5.0, 6.0 e 7.0
4.3 mm
MEDIUM
8.5, 10.0 e 11.5
5.0 mm
LONG
Indicated
13.0 e 15.0
Optional
DRIVERS
This implant comes in a mounted version and must be captured with drivers connections: against angle, wrench (ratchet) or directly with the torque wrench. 28.4008
28.4006 28.4007
28.4002 28.4102
CAPTURE AND TRANSPORT OF IMPLANT 1
2
3
1 - With the Badock take the implant to the surgical place 2 - Takeoff the badock 3 - Attach the driver for contra-angle, surgical torque or ratchet wrench with torque.
87
FLEX CONE速 PROSTHETIC LINE PROSTHETIC LINE FLEXCONE速
PROSTHETIC SOLUTIONS OVER IMPLANT
SLIM 4.0 1.2
Open tray impression transfer 1.2 15 Ncm
Code 77.3393 77.3391
REGULAR 3.8
Healing Cap Code
4.3
77.3380
Analog Code 77.3321
5.0
1.2
Closed tray impression transfer Code 77.3392 77.3390
SHORT 3.8 4.3 5.0
FLEX
CONE® PROSTHETIC SOLUTIONS SCREW-RETAINED
1.2 35 Ncm
1.2 35 Ncm
1.2 35 Ncm 1.2
1.2
Titanium Pillar (UCLA) Code
Plastic UCLA
CoCr plastic UCLA Code
Code
77.3511
77.3411
77.3311
77.3512
77.3412
77.3312
Screw
Lab prosthetic screw Code
Code 7.7050
7.7055
PROSTHETIC SOLUTIONS CEMENTED
1.2 20 Ncm
1.2 20 Ncm
Provisional Cylinder SHORT
Provisional Cylinder LONG
Code
Code
72.3709
72.3711
1.2 20 Ncm
Calcinable Cylinder SHORT Code 72.3708 72.3706
1.2 20 Ncm
Calcinable Cylinder LONG Code 72.3710
PROSTHETIC SOLUTIONS OVERDENTURE 1.2 20 Ncm
O’ring Pillar Code 72.3703 * Closed keeper sale apart: Closed keeper code: 2.4101
89
MINI FLEX CONE® • DESIGN: the implant Osteofit® FCM present the smallest diameter (Ø 2.5) of the market for screw-retained connection implant. Your trapezoidal self cutting thread helps the insertion in thin bone plates. The prosthetic solutions is conceived for region of mesio distal reduced spaces, like between lower incisors and superior lateral. Limitation when positioning the entrance. • MATERIAL: Titanium grade IV. • SURFACE: SLA Zircon®. • PRESENTATION: only available in mounted version. Cover screw not included. • PROSTHETIC SOLUTIONS: His prosthetic solution is the line mini-FlexCone®. Can be screw-retained, cemented or overdenture. • SPEED DRILLING: 400 a 1.200 rpm; • ROTATION INSERT: 10 a 30 rpm; • TORQUE INSERTION: 35 a 55 Ncm.
M 1.6 2,6
ø 3,0
TECHNICAL SPECIFICATIONS
M 1.6 2,6
ø 3,0
1,8 2,5
FLEX CONE®
MINI TECHNICAL SPECIFICATIONS OF IMPLANTS FLEX CONE®
Ø 3.0
MINI
1
2,6
2
2,62,6 ø 3,0 ø 3,0 ø 3,0
FLEX CONE MINI
®
Same height of conical mini Pillar 10
18.2510
11.5
18.2511
13
18.2513
15
18.2515
17
18.2517
Restricted areas
3
4
1,8
MODELS AND LENGTHS
2,5 1,81,8 2,5 2,5
SEQUENCE OF DRILLS
Screw-retained
5
Spear Drill 2.0
Drill 1.6
Lesser thread of the market for dental implants
6
2.5 mm Cemented Indicated
O’ring
Optional
DRIVERS
This implant comes in a mounted version and must be captured with drivers connections: against angle, wrench (ratchet) or directly with the torque wrench. 28.4008
28.4006 28.4007
28.4002 28.4102
CAPTURE AND TRANSPORT OF IMPLANT 1
2
3
1 - With the Badock take the implant to the surgical place 2 - Takeoff the badock 3 - Attach the driver for contra-angle, surgical torque or ratchet wrench with torque.
91
MINI FLEX CONE速 PROSTHETIC LINE PROSTHETIC LINE MINI FLEXCONE速
PROSTHETIC SOLUTIONS OVER IMPLANT
1.2
1.2 15 Ncm
Open tray impression transfer Code 77.3093
Mini FlexCone速 3.0
Healing Cap Code
1.2
77.3080
Analog Code 77.3021
Closed tray impression transfer Code 77.3092
FLEX CONE®
MINI PROSTHETIC SOLUTIONS SCREW-RETAINED
1.2 1.2 35 Ncm
1.2 35 Ncm
1.2
1.2 35 Ncm
Titanium Pillar (UCLA) Code
CoCr plastic UCLA Code
Code
77.3211
77.3111
77.3011
Plastic UCLA
Lab prosthetic screw
Screw Code
Code
7.3050
7.3055
PROSTHETIC SOLUTIONS CEMENTED
1.2 20 Ncm
1.2 20 Ncm
1.2 20 Ncm 1.2 20 Ncm
Provisional Cylinder SHORT Code
Provisional Cylinder LONG Code
72.3009
72.3011
Plastic Cylinder SHORT Code 72.3008 72.3005
Plastic Cylinder LONG Code 72.3010
PROSTHETIC SOLUTIONS OVERDENTURE 1.2 20 Ncm
Micro O’ring Pillar Code. 72.3004 * Closed keeper sale apart: Closed keeper code: 2.4101
93
WE RENEW THE PRACTICAL We present our brand new instrumental kit line, that complete the DSP Biomedical速 products. New instruments with new technologies for ease the surgery and prosthetic procedures, transforming the smiles in a new one more beauty and perfect.
INSTRUMENTAL KITS
95
17.0 15.0 13.0 11.5 10.0 8.5 7.0 5.5
DEPTH DRILLING
EASY IDENTIFICATION
HIGH DEFINITION RECORDS ROUNDED SIDE
HIGH POWER CUT
THE FUNCTIONALITY, STRENGTH AND ESTHETICS
OF CARBONUM DRILLS 速
MATERIAL
Drill designed with high tech material, coloring graffiti, to situations where they are needed functionality, high strength combined with lightness, qualities that give stability and robustness of the product. Especially aesthetic unmistakable and sophisticated, lowest wear for continous use, reducing above 70% of the heat generated by friction bone, are factors that prevail in this new design for drills of DSP Biomedical速.
3291-2200
+55 41 www.dspbiomedical.com.br
ILLUSTRATI
VE IMAGE
SURGICAL KIT
SENIOR
CODE: DESCRIPTION
CODE
1 | CASE........................................................... 28.4005 2 | PARALLELIZER.............................................. 28.4041 3 | PARALLELIZER.............................................. 28.4041 4 | PARALLELIZER.............................................. 28.4041 5 | PARALLELIZER MILLIMETERED...................... 28.4042 6 | PARALLELIZER MILLIMETERED...................... 28.4042 7 | PARALLELIZER MILLIMETERED...................... 28.4042 8 | CARBONUM DRILL 1.6................................ 28.8016C 9 | CARBONUM DRILL 2.0................................ 28.8020C 10 | CARBONUM DRILL 2.5................................ 28.8025C 11 | CARBONUM DRILL 2.8................................ 28.8028C 12 | PILOT 2/3.................................................. 28.8223C 13 | CARBONUM DRILL 3.0................................ 28.8030C 14 | CARBONUM DRILL 3.15.............................. 28.8031C 15 | CARBONUM DRILL 3.3................................ 28.8033C 16 | CARBONUM DRILL 3.5................................ 28.8035C 17 | CARBONUM DRILL 3.8................................ 28.8038C 18 | CARBONUM DRILL 4.3................................ 28.8043C 19 | MALE TRIANGULAR 3.3.............................. 28.8533C 20 | MALE TRIANGULAR 3.8.............................. 28.8537C 21 | MALE TRIANGULAR 4.0.............................. 28.8540C 22 | MALE TRIANGULAR 4.3.............................. 28.8543C 23 | COUNTERSINK 5.0........................................ 28.8350C 24 | CONNECTION TI HEX GRIP LONG.................... 28.3020 25 | CONNECTION TI HEX GRIP SHORT.................. 28.2020 26 | CONNECTION HIM LONG............................... 26.5061R 27 | CONNECTION HIM SHORT...............................26.5060R 28 | CONNECTION FITPLUS LONG......................... 26.5061F 29 | CONNECTION FITPLUS SHORT........................ 26.5063F 30 | CONNECTION CMH 3.3 LONG........................ 26.5058 31 | CONNECTION CMH 3.3 SHORT....................... 26.5057 32 | CONNECTION CMH 4.0 LONG........................ 26.5061 33 | CONNECTION CMH 4.0 SHORT....................... 26.5060
DESCRIPTION
28.4756 CODE
34 | MOUNT HE 3.3................................................... 1.3350 35 | MOUNT HE 4.0/5.0............................................ 1.4050 36 | MOUNT FLEXCONE............................................. 71.4150 37 | MOUNT MINI-FLEXCONE...................................... 71.3150 38 | DRAW IMPLANT................................................. 28.0006 39 | CONNECTION RATCHET LONG/SHORT.... 28.4007/28.4006 40 | CONNECTION AGAINST ANGLE............................ 28.4008 41 | EXTENSION DRILL............................................... 28.4030 42 | DIGITAL DRIVER 0.9M......................................... 28.2509 43 | DIGITAL DRIVER 1.2M......................................... 28.2512 44 | DIGITAL DRIVER 1.3M......................................... 28.2613 45 | TITANIUM SPEAR 2.5/3.3................................... 27.4035 46 | TITANIUM SPEAR 3.8/4.0.................................... 27.4040 47 | TITANIUM SPEAR 4.3/5.0.................................... 28.4025 48 | CONICAL DRILL SHORT 3.8................................. 27.3807 49 | CONICAL DRILL MEDIUM 3.8.............................. 27.3811 50 | CONICAL DRILL LONG 3.8................................ 27.3815 51 | CONICAL DRILL SHORT 4.3................................. 27.4307 52 | CONICAL DRILL MEDIUM 4.3.............................. 27.4311 53 | CONICAL DRILL LONG 4.3................................ 27.4315 54 | CONICAL DRILL SHORT 5.0................................. 27.5007 55 | CONICAL DRILL MEDIUM 5.0.............................. 27.5011 56 | CONICAL DRILL LONG 5.0.................................. 27.5015 57 | RATCHET DRIVER............................................... 28.4002 58 | TUFO DRIVER...................................................... 28.4001 59 | AUGER MILLIMETERED........................................ 28.4003 60 | DRILL SPEAR 2.5........................................... 28.8225C
99
ILL
US
TR
AT IV
EI
MA
GE
SURGICAL KIT
COMPACT CODE: DESCRIPTION
24.0001 CODE
1 | CASE.................................................................. 28.4105 2 | PARALLELIZER MILLIMETERED.............................. 28.4041 3 | PARALLELIZER MILLIMETERED.............................. 28.4042 4 | CARBONUM DRILL 2.0........................................ 28.8020C 5 | CARBONUM DRILL 2.5........................................ 28.8025C 6 | CARBONUM DRILL 2.8........................................ 28.8028C 7 | PILOT 2/3........................................................... 28.8223C 8 | CARBONUM DRILL 3.0........................................ 28.8030C 9 | CARBONUM DRILL 3.15...................................... 28.8031C 10 | CARBONUM DRILL 3.3........................................ 28.8033C 11 | CARBONUM DRILL 3.5........................................ 28.8035C 12 | CARBONUM DRILL 3.8........................................ 28.8038C 13 | CARBONUM DRILL 4.3........................................ 28.8043C 14 | CONNECTION CMH 3.3 SHORT/LONG....... 26.5057/26.5058 15 | CONNECTION CMH 4.0 SHORT/LONG....... 28.5060/26.5061 16 | MOUNT HE 3.3.................................................... 1.3350 17 | CONNECTION RATCHET SHORT/LONG....... 28.4006/28.4007 18 | EXTENSION DRILL................................................ 28.4030 19 | DIGITAL DRIVER 0.9M.......................................... 28.2509 20 | DIGITAL DRIVER 1.2M.......................................... 28.2512 21 | DIGITAL DRIVER 1.3M.......................................... 28.2613 22 | WRENCH RATCHET (OPTION TORQUE WRENCH)..... 28.4002 23 | MOUNT 4.0 HE.................................................... 1.4050 24 | SPEAR................................................................ 28.4025
101
ILL
US
TR
AT IV
E
IM
AG
E
KIT
PROSTHETIC CODE:
DESCRIPTION
28.1000 CODE
1 | CASE................................................................... 28.5558 2 | CONNECTION 0.9 SHORT...................................... 26.2009 3 | CONNECTION 1.2 SHORT...................................... 26.2012 4 | CONNECTION 1.3 SHORT...................................... 26.2013 5 | CONNECTION 0.9 LONG........................................ 26.3009 6 | CONNECTION 1.2 LONG........................................ 26.3012 7 | CONNECTION 1.3 LONG........................................ 26.3013 8 | CONNECTION C.A 0.9 SHORT/MEDIUM..... 28.2309/28.2809 9 | CONNECTION C.A 1.2 SHORT/MEDIUM..... 28.2312/28.2812 10 | CONNECTION C.A 1.3 SHORT/MEDIUM. ....28.2313/28.2813 11 | CONNECTION MINI PILLAR..................................... 28.2506 12 | CONNECTION O’RING............................................ 28.2527 13 | CONNECTION MINIFLEXCONE................................. 71.3150 14 | CONNECTION FLEXCONE....................................... 71.4150 15 | METER GINGIVAL CM............................................ 28.7000 16 | METER GINGIVAL CMH ......................................... 28.6000 17 | METER GINGIVAL CMF........................................... 28.7010 18 | METER GINGIVAL HIM........................................... 28.6010 19 | RATCHET TORQUE DRIVER..................................... 28.4102 20 | BIDIGITAL DRIVER.................................................. 28.1520
103
DSP BIOMEDICAL
速
IS MUCH MORE VERSATILITY DRAW
IMPLANTS We are entering the 4th teething. The DSP Biomedical速 launch one product used for draw implant of several connections: external, internal and cone morse, with internal threads of 1.6 and 2.5 mm. Great solution for remove malposed implants, that suffered a big bone loss or mechanical damage.
CODE
28.0006
DRILL
KIT
ILLU
STR
ATIV E
IMA
GE
CODE: DESCRIPTION
ILLU
CODE
1 | CASE .......................................................... 28.5034 2 | CONICAL DRILL SHORT 3.8............................27.3807 3 | CONICAL DRILL MEDIUM 3.8......................... 27.3811 4 | CONICAL DRILL LONG 3.8........................... 27.3815 5 | CONICAL DRILL SHORT 4.3............................27.4307 6 | CONICAL DRILL MEDIUM 4.3......................... 27.4311 7 | CONICAL DRILL LONG 4.3........................... 27.4315 8 | CONICAL DRILL SHORT 5.0............................27.5007 9 | CONICAL DRILL MEDIUM 5.0......................... 27.5011 10 | CONICAL DRILL LONG 5.0........................... 27.5013
STR
ATIV E
27.8000
IMA
GE
CODE:
28.8000
DESCRIPTION 1 | CASE ......................................................... 2 | CARBONUM DRILL 1.6................................ 3 | CARBONUM DRILL 2.0................................ 4 | CARBONUM DRILL 2.5................................ 5 | CARBONUM DRILL 2.8................................ 6 | PILOT DRILL 2/3.......................................... 7 | CARBONUM DRILL 3.0................................. 8 | CARBONUM DRILL 3.15............................... 9 | CARBONUM DRILL 3.3................................. 10 | CARBONUM DRILL 3.5................................. 11 | CARBONUM DRILL 3.8................................. 12 | CARBONUM DRILL 4.3.................................
CODE 28.5033 28.8016C 28.8020C 28.8025C 28.8028C 28.8223C 28.8030C 28.8031C 28.8033C 28.8035C 28.8038C 28.8043C
KIT EXPANDER
BONE DESCRIPTION
ILL
US
1 | CASE ............................................................ 28.5555 2 | EXPANDER BONE Ø2.0................................. 28.5120 3 | EXPANDER BONE Ø2.5................................. 28.5125 4 | EXPANDER BONE Ø3.0................................. 28.5130 5 | EXPANDER BONE Ø3.5................................. 28.5135 6 | EXPANDER BONE Ø4.5................................. 28.5145
TR
AT IV
E
CODE
IM
AG
E
CODE:
28.5100
KIT OSTEOTOME OF
SUMMERS DESCRIPTION
ILL
US
1 | CASE............................................................. 28.5556 2 | OSTEOTOMO Ø2.6......................................... 28.5026 3 | OSTEOTOMO Ø3.0......................................... 28.5030 4 | OSTEOTOMO Ø3.5......................................... 28.5035 5 | OSTEOTOMO Ø3.8......................................... 28.5038
TR
AT IV
E
CODE
IM
AG
E
CODE:
28.5000
KIT
ELEVATOR/EXPANDER CODE: ILL US TR AT IVE
IM AG E
28.5100R
DESCRIPTION
CODE
1 | CASE ELEVATOR/EXPANDER.......................... 28.5554 2 | ELEVATOR OF MEMBRANE Ø 2.6................... 28.5026 3 | ELEVATOR OF MEMBRANE Ø 3.0................... 28.5030 4 | ELEVATOR OF MEMBRANE Ø 3.5................... 28.5035 5 | ELEVATOR OF MEMBRANE Ø 3.8................... 28.5038 6 | EXPANDER BONE Ø 2.0............................... 28.5120 7 | EXPANDER BONE Ø 2.5............................... 28.5125 8 | EXPANDER BONE Ø 3.0............................... 28.5130 9 | EXPANDER BONE Ø 3.8............................... 28.5135 10 | EXPANDER BONE Ø 4.5............................... 28.5145 11 | CABLE ELEVATOR/EXPANDER STRAIGHT......... 28.5120/2 12 | CABLE ELEVATOR/EXPANDER ANGLED........... 28.5120/3 13 | DRIVER ASSEMBLY ELEVATOR/ EXPANDER...... 28.5120/4
KIT
BONE GRAFT DESCRIPTION
CODE
1 | CASE KIT GRAFT............................................ 28.5559 2 | HAND DRIVER............................................... 28.6150 3 | CONNECTION PHILIPS FOR HAND DRIVER.........28.6151 4 | CONNECTION PHILIPS AGAINST-ANGLE........... 28.6153 5 | TWIST DRILLS Ø1.0....................................... 28.8010 6 | TWIST DRILLS Ø1.0 LONG.............................. 28.9210 7 | TWIST DRILLS Ø1.6....................................... 28.8016 8 | TWIST DRILLS Ø1.6 LONG.............................. 28.8116 ILL
US
TR
AT IV
E
IM
AG
E
CODE:
28.6100
SCREW
GRAFT DESCRIPTION 1 | SCREW GRAFT 1.6 X 7.0............................... 2 | SCREW GRAFT 1.6 X 8.5............................... 3 | SCREW GRAFT 1.6 X 10.0............................. 4 | SCREW GRAFT 1.6 X 11.5............................. 5 | SCREW GRAFT 1.8 X 7.0............................... 6 | SCREW GRAFT 1.8 X 8.5............................... 7 | SCREW GRAFT 1.8 X 10.0............................. 8 | SCREW GRAFT 1.8 X 11.5.............................
CODE 28.6107 28.6108 28.6110 28.6111 28.8107 28.8108 28.8110 28.8111
107
ILL
US
TR
AT IV
EI
MA
GE
RINGS OF
PROTOTYPE Guide Holder - Ø 1.5 - Code 27.0020
Mini surgical guide - Ø 3.5 - Code 27.0024
Surgical Guide - Ø 5.0 - Code 27.0025
KIT
FITGUIDE CODE: DESCRIPTION
27.0000 CODE
1 | CASE FITGUIDE.......................................... 27.0000 2 | SCALPEL OF MUCOSA FITGUIDE Ø 3.5M........ 27.8002 3 | SCALPEL OF MUCOSA FITGUIDE Ø 3.5........... 27.8003 4 | SCALPEL OF MUCOSA FITGUIDE Ø 4.0............27.8001 5 | DRILL SPEAR 2.0........................................ 27.8120 6 | TWIST DRILLS FITGUIDE Ø1.3................ 27.8013 7 | TWIST DRILLS FITGUIDE Ø2.0................ 27.8020 8 | TWIST DRILLS FITGUIDE Ø2.8................ 27.8028 9 | TWIST DRILLS FITGUIDE Ø3.0................ 27.8030 10 | TWIST DRILLS FITGUIDE Ø3.3................ 27.8033 11 | DRILL RETIF FITGUIDE Ø3.5M....................... 27.8234 12 | DRILL RETIF FITGUIDE Ø3.5.......................... 27.8235 13 | CONNECTION RATCHET HEX...........................27.4007 14 | DRIVER WITH ÂNG. HEX................................. 27.4008 15 | BIDIGITAL DRIVER..........................................28.1520 16 | FITGUIDE FOR BROCAS Ø2.0..................... 27.2020 17 | FITGUIDE GUIDE FOR DRILLS Ø2.8................ 27.2028 18 | FITGUIDE GUIDE FOR DRILLS Ø3.3................. 27.2033 19 | FITGUIDE GUIDE FOR IMPLANT MOUNT.......... 27.0010 20 | FITGUIDE GUIDE FOR DRILLS Ø2.0M............. 27.2120 21 | FITGUIDE GUIDE FOR DRILLS Ø2.8M...............27.2128 22 | TITANIUM SPEAR FITGUIDE Ø4.0................. 27.4040 23 | TITANIUM SPEAR FITGUIDE Ø3.5................... 27.4035 24 | TITANIUM SPEAR FITGUIDE Ø2.5................... 27.4025 25 | TORQUE RATCHET DRIVER............................. 28.4102 26 | HOLDER GUIDE FITGUIDE............................... 27.0030 27 | DRIVER DIG. HEX. 0.9 SHORT..........................28.1509 28 | DRIVER DIG. HEX. 1.2 SHORT..........................28.1512 29 | DRIVER DIG. SQUARE 1.3 SHORT.................. 28.1613 30 | MOUNT FLEXCONE® 4.0 ESP........................ 71.4152 31 | MOUNT CONEMORSE 3.5 ESP........................ 71.3552 32 | MOUNT CONEMORSE 4.0 ESP........................ 71.4052 33 | MOUNT MINI FLEXCONE® 3.5 ESP................. 71.3351 34 | MOUNT MINI FLEXCONE® ESP....................... 71.3352
109
ILL
US
TR
AT IV
E
IM
AG
E
Mini-implant
ORTHODONTIC NECK WITH 0.5mm
Ø 1.4
Ø 1.6
1 | MINI-IMPLANT ORTHOFIT H7.0 L0................ 150.1407............150.1607 2 | MINI-IMPLANT ORTHOFIT H8.5 L0................ 150.1408............150.1608 3 | MINI-IMPLANT ORTHOFIT H10.0 L0.............. 150.1410............150.1610 4 | MINI-IMPLANT ORTHOFIT H11.5 L0.............. 150.1411 150.1611 NECK WITH 2.0mm
Ø 1. 4
Ø 1.6
1 | MINI-IMPLANT ORTHOFIT H7.0 L2................ 152.1407 ............152.1607 2 | MINI-IMPLANT ORTHOFIT H8.5 L2................ 152.1408 ...........152.1608 3 | MINI-IMPLANT ORTHOFIT H10.0 L2.............. 152.1410 ............152.1610 4 | MINI-IMPLANT ORTHOFIT H11.5 L2.............. 152.1411 ............152.1611 NECK WITH 4.0mm
Ø 1.4
Ø 1.6
1 | MINI-IMPLANT ORTHOFIT H7.0 L4................ 154.1407 ............154.1607 2 | MINI-IMPLANT ORTHOFIT H8.5 L4................ 154.1408 ...........154.1608 3 | MINI-IMPLANT ORTHOFIT H10.0 L4.............. 154.1410 ............154.1610
KIT
ORTHODONTIC CODE: DESCRIPTION
150.0002 CODE
1 | CASE ................................................................. 150.0001 2 | ORTHODONTIC AGAINST ANGLE DRIVER................. 150.2300 3 | ORTHODONTIC RATCHET DRIVER...........................150.2400 4 | ORTHODONTIC HAND DRIVER............................... 28.6150 5 | SPEAR FOR HAND DRIVER.................................... 150.2601 6 | SPEAR FOR AGAINST ANGLE ................................ 150.2602 7 | BIDIGITAL DRIVER................................................. 28.1520 8 | CONNECTION ORTHODONTIC FOR HAND DRIVER.....150.2501
For those users of mini-implant that wish know more about the Osteofit速 system, please access the website of DSP Biomedical速 and download free the technic Stev達o-Netzel. http://www.dspbiomedical.com.br
111
A
ACCESSORIES
P
SURGERY INSTRUMENTALS
Trephine
Scalpel gingival
Profile
Code
3.3
28.8133
4.1
28.8140
4.3
28.8143
5.0
28.8150
8.0
28.8180
10.0
28.8100
Profile
Countersink Pilot
Code Profile
Code
3.3
28.8001
3.8
28.8002
2/2.5
28.8221
4.1
28.8003
2/2.8
28.8222
4.3
28.8004
2/3.0
28.8223
5.0
28.8005
3/3.8
28.8234
Parallelizer millimetered
Profile
Code
3.3
28.8333
3.8
28.8337
2.0
3.0
28.4042
4.0
28.8340
3.0
3.8
28.4043
4.3
28.8343
3.8
4.3
28.4044
5.0
28.8350
ØSmaller ØBigger
Code
Rectifier thread Spindle Extractor Parallelizer SHORT ØMenor
ØMaior
Code
2.0
3.0
28.4041
Thread
Code
Opened driver
1.4
26.1014
Code
1.8
26.1018
28.4010
2.0
26.1020
2.5
26.1025
Thread
Code
1.4
28.1014
1.6
28.1016
1.8
28.1018
2.0
28.1020
2.5
28.1025
Expander ratchet Thread
Code
3.8
27.5138
4.3
27.5143
5.0
27.5150
A
P
Stop Rings Profile
Code
2.0
28.7020
2.3
28.7023
2.5
28.7025
2.8
28.7028
3.0
28.7030
Stop Rings Profile
Code
3.15
28.7031
3.3
28.7033
3.5
28.7035
Frictional Beater
3.8
28.7038
Code
4.3
28.7043
28.2000
4.5
28.7045
Pin
Extender Bar
Ring
Pillar
26.0002
26.0005
Pin
Abutment
26.0003
26.0006
ACCESSORIES ACCESSORIES
PROSTHETIC INSTRUMENTALS
Pilar and mini-pilar Driver Height Code
O’ring and micro o’ring Driver Code 28.2527
Profile
Digital driver Height Short
28.1509
0.9
Medium
28.2509
1.2
Short
28.1512
1.2
Medium
28.2512
1.2
Long
28.3512
1.3
Medium
28.2613
1.3
Long
28.3613
ACCESSORIES PROSTHETIC
28.2506
Long
28.2510
Ratchet connection Driver Profile Height Code
Code
0.9
Short
Profile
Code
Curto
71.4150
3.0
Curto
71.3150
Médio
71.4160
3.0
Médio
71.3160
4.0
Longo
71.4170
3.0
Longo
71.3170
Against angle connection driver Profile Height Code
Short
26.2009
0.9
Short
28.2309
Medium
26.3009
0.9
Medium
28.2809
1.2
Short
26.2012
1.2
Short
28.2312
1.2
Medium
26.3012
1.2
Medium
28.2812
1.3
Short
26.2013
1.3
Short
28.2313
1.3
Medium
26.3013
1.3
Medium
28.2813
Set Bar Code
Pino
2.4096
Barra
2.5092
Mini FlexCone® Height Code
4.0
0.9
O’RING
Profile
4.0
0.9
SYSTEM
Itens
FlexCone® Height
SYSTEM
MICRO-O’RING
SYSTEM
CLIP-BAR
Clip-Bar Pin with Root Code 2.4090
Itens
Code
Bar 50mm
2.5092
clip 70º
2.5093
clip 35º
2.5094
clip reto
2.5095
Combination with 1 of each
2.5096
113
NOMENCLATURES S L I M N B
-
SHORT LONG INDEXED MULTIPLE OR MOUNTED NEW BIOFIT
LH SH LN SN
-
LONG WITH INDEX SHORT WITH INDEX LONG ROTATIONAL SHORT ROTATIONAL
F F
- ROTATIONAL - INDEXED WITH HEXAGON
- FRICTIONAL - FLEXCONE FORM OF THE INSERTION DRIVER
1.2 30 Ncm
SIZE OF INSERTION DRIVER TORQUE INSERTION
TECHNICAL INFORMATION Transferents Apply slight tightening on screw of transfers through manual driver. Those components need fitness at power time. Avoid excessive torque. Healings The recomended torque for healings must be about 30 Ncm to avoid the unscrew during gingival and bone healing time. The constant loosen or tighten of healings cause A soltura e reaperto constante dos cicatrizadores levam Ă peri-implant mucositis and if not evaluated and treated results in peri-implantitis causing bone loss.
S
The products showed in this catalog could take modifications without warning. All rights are reserved to DSP Biomedical速. Any form of use, distribute, reprodution or publishing of this content is extremely forbided, being subject the violator to legal penalties, according to the brazilian law 9610/98 Catalog print date: 2013 April.