Oil Installer Spring 2012

Topical issues affecting the industry today

Spring 2012 Volume 6 No 1

in association with

www.oftec.org

AF TR FOR AIN DA IN BLE G*

*P eX lum tra b C po en in ter ts a fo cc r f ou ul nt lc h ou ol rse de pa rs ca ym n en use t.

A brighter future when you take the road to MCS

50 #00, :063 3&/&8"#-& 53"*/*/( $0634& 03 '*/% :063 /&"3&45 7&/6&

$"--

We’re Making Renewable More Do-Able TRAINING IN ASSOCIATION WITH

MCS ACCREDITATION IN ASSOCIATION WITH

www.plumbcentertraining.co.uk

Editorial

Contents

A year of firsts

4-12/Industry News

14-15/Registration News

H

appy new year and a very warm welcome to this first 2012 issue of Oil Installer.

16/Irish News

Will the new Green Deal help or hinder households in rural areas suffering from fuel poverty? OFTEC has raised concerns – see page 4. Spending more than 10% of income to heat their homes, over a quarter of households in rural areas are in fuel poverty.

18-22/Boiler News

23-25/Hot Technical Topics To get a fair deal for the oil heating industry, OFTEC continues to lobby the UK government and European Commission as the industry faces discrimination in the proposed energy efficiency ratings.

26-29/Readers’ Questions featuring OFTEC has also met with MPs and Lords at Westminster to build support for the inclusion of bioliquids in the Renewable Heat Incentive. Read more on page 4.

competitions on page 27

Next month OFTEC will be exhibiting at Ecobuild. The exhibition is on from 20th22nd March at Excel in East London where we will be joined by several OFTEC members – see page 8. We look forward to seeing Oil Installer readers at the show.

30-33/Training

In October, the Oil and Renewable Energy Show takes place at the Manchester Central Convention Complex. Discover more about the show on page 5 and at www. oilandrenewableenergyshow.co.uk where you can also register for your FREE ticket.

34-40/Products & Services

And finally, the Awards for Excellence are back….to find out how you could win one of the £500 prizes, turn to page 5.

41-45/Renewables Best wishes,

WIN an iPad2! see page 27

46/Gallery

Jeremy Hawksley

Credits Ashley & Dumville Publishing Ltd Caledonian House, Tatton Street, Knutsford, Cheshire WA16 6AG Tel: +44 (0)1565 653283; Fax: +44 (0)1565 755607 mail@andpublishing.co.uk The publishers gratefully acknowledge the support of those firms whose advertisements appear throughout this publication. As a reciprocal gesture we have pleasure in drawing the attention of our readers to their announcements. It is necessary however for it to be made clear that, whilst every care has been taken in compiling this publication and the statements it contains, the publishers cannot accept responsibility for any inaccuracies, or the products or services advertised.

Printed by Pelican Press, Manchester Tel: 0161 273 3434

Advertising Publishing manager: Jonathan Hibbert Media pack on request jonathan@oilinstaller.co.uk

News Desk Editor: Jane Hughes jane@oilinstaller.co.uk Spring 2012 Volume 6 No 1 ISSN 1755-3490 Oil Installer Spring 2012 | 3

Industry News - lobbying, supporting and questioning

Bioliquid campaign gathers pace OFTEC is at the centre of a parliamentary lobbying campaign to include bioliquid heating fuels in the Renewable Heat Incentive (RHI) from October Since last October, director general, Jeremy Hawksley, chairman, Barry Gregory, and Neil Schofield of Worcester Bosch have held 13 meetings with MPs and Lords at Westminster with more meetings planned.

Several parliamentary questions have been asked and MPs have written to minister, Greg Barker. A further letter

with 12 MP signatories is due to be sent, following which OFTEC expects to meet with the minister shortly.

In a separate campaign, OFTEC is lobbying members of the Northern Ireland Assembly and NI MPs to persuade them to give a higher tariff to bio-liquids in the NI RHI scheme, which is different from that in Great Britain.

Bioliquids could save 1.2 million tonnes of CO2 per annum by 2020 As part of their campaign, OFTEC released new research results which show that a switch from kerosene to bioliquids could save the UK over 1.2 million tonnes of CO2 per annum by 2020.

Field trials over an 18-month period tested a blend of 30% fatty acid methyl ester (FAME), manufactured from waste cooking oil, and 70% kerosene. Compared to conventional kerosene, the blend has been proven to reduce carbon emissions by 28%. If this blend were included in the RHI, OFTEC believes that by 2020 90% of existing oil customers could be using it.

Concern over Green Deal OFTEC has expressed concern over whether the new Green Deal will sufficiently address the problems of fuel poverty in rural areas. In a written submission to the select committee inquiry into fuel poverty in the private rented and off-grid sectors, OFTEC questioned whether the Green Deal and Energy Company Obligation would be financially attractive enough for rural households.

Around a quarter of households in rural areas are fuel poor and, in recent years, the Warm Front scheme has been successful in improving energy efficiency and reducing fuel bills for many of those homes. Now that the taxpayer scheme is being phased out, OFTEC is concerned that the measures proposed in the Green Deal may not be as effective as Warm Front.

Jeremy Hawksley, OFTEC director general said: “Under the Green Deal proposals, energy efficiency improvements will be financed through higher long-term electricity bills for 4 | Oil Installer Spring 2012

OFTEC has retained public affairs specialists, Luther Pendragon to administer both campaigns. After contact with civil servants regarding the RHI – in London and in Belfast – it has become clear that there are concerns about the future availability of sustainable biofuel at a feasible market price.

To address these issues, OFTEC has prepared a paper

it is unlikely there will be a significant take up of the Green Deal in rural areas the householder. The Green Deal needs to recognise that fuel poor households may be unable or unwilling to accept higher bills, and therefore it is unlikely there will be a significant take up of the Green Deal in rural areas. Although the scheme plans to provide assistance for both the hardest to reach and hardest to treat properties, it must focus initially on the fuel poor as a priority.”

In its written response, OFTEC also advocated a means-tested approach to the winter fuel payment, which should only be paid in the form of a fuel voucher as opposed to the current cash payment. OFTEC also called for mandatory servicing of oil-fired appliances in the private rented sector, and for a more robust approach to the enforcement of existing legislation to make sure that heating systems are installed and commissioned correctly. See also page 40.

explaining how sufficient incentives are needed for farmers to plant feedstocks for bioliquids – including rape seed and wheat – in order to meet increased worldwide demand.

A minimum 8p per kw subsidy is being sought for bioliquids inclusion in the RHI. OFTEC believes this is the minimum level needed to make bioliquids viable for end consumers.

Trials and guidance As an operator of a competent persons scheme, OFTEC has been selected to take part in a UKAS pilot scheme allied to the government’s new Green Deal initiative.

The initiative will see householders receive incentives to install energy efficiency measures provided these are installed by certified technicians.

Accreditation is scheduled for completion by April with the cost of the trials being covered by the Department of Energy and Climate Change. OFTEC has also been accepted to provide auditor services for the pilot, and, as such, has received auditor training for three employees.

New guidance documents for OFTEC registered businesses will explain the requirements of the Green Deal scheme.

October’s future energy showcase Some of the best known names in the oil and renewable energy sector have chosen to sponsor the Oil & Renewable Energy Show 2012.

OFTEC is confirmed as the event’s main industry sponsor, with Kingspan Environmental, Plumb Center, Parts Center, Worcester Bosch, Harlequin, Riello and Warmflow among the key trade sponsors.

The event is being organised by A&D Publishing – publishers of Oil Installer and Renewable Energy Installer.

A&D’s Jonathan Hibbert says: “We’re delighted to welcome onboard such a distinguished

the nation’s premier showcase for the latest and future energy solutions and technologies for the off-gas sector

group of big names as show sponsors. Their support is testament to its significance.”

“OFTEC is delighted to be the industry sponsor,” says director general, Jeremy Hawksley. “This will be the nation’s premier showcase for the latest and future energy solutions and technologies for the off-gas sector.”

Interest in the show, which takes place at the Manchester Central convention complex on 17th – 18th October, is growing fast. The show will feature not only the latest in oil and renewable heating technology but will also offer free seminars and live demonstrations.

For more information – including availability of exhibition space, marketing opportunities and registration – call the Oil & Renewable Energy Show team on 01565 653283. www.oilandrenewable energyshow.co.uk

Excellent rewards The OFTEC Awards for Excellence 2012, which recognise and reward excellence in the industry, are now open for entries.

Open to registered technicians, trainees, training centres and manufacturers, award categories include installer of the year, service & commissioning technician of the year, and oil tank installer of the year – with a prize of £500 for each category’s winner.

The award ceremony will take place at a gala dinner on Thursday 18th October following the final day of the Oil and Renewable Energy Show.

Enter now!

Technicians can either nominate themselves or be nominated by their regional inspector.

Entry forms can be downloaded at www.oftec.org.

The closing date is 30th May 2012.

Oil Installer Spring 2012 | 5

Chris and Stuart Brearley of Deeping Gas & Electrical Services.

Bo

ile

1 20 rs Se ptember

1

* # " #$ " %# $# % !% %#$ " %# "" "# $ %#$ " # "& ' #$" & " & ")

# #$ $ #$ "$ $ ) ' ) % %" # " #$ " " ) % ,$ %#$ $ ( $ " % $ ) % $ $ ' ' % # $ $ #$ $" $ # $ # "& # % $ $ # # $ + Stuart Brearley DEEPING GAS & ELECTRICAL SERVICES

" & # $ ''' ' " #$ " # % $ - %$ "

Half a century of warmth

Industry News - the drive for greater energy efficiency

Highlighting the need for ‘a good, efficient boiler’ On a recent visit to the headquarters of the Worcester, Bosch Group, Chris Huhne, former secretary of state for energy and climate change, was questioned on a number of issues including the UK economy, the Renewable Heat Incentive, the Green Deal and feed-in tariffs Mr Huhne also commented on saving energy and reducing fuel bills.

“Consumers need to shop around in the short term to switch to a cheaper supplier and take extra steps like insulating their homes. The importance of having a good, efficient boiler to avoid wasting energy is also underlined.”

Whilst touring the company’s manufacturing and training facilities, Mr Huhne praised the company’s focus on training for both installers and apprentices. “The apprenticeship scheme at Worcester, Bosch Group is absolutely crucial to the reputation that this company has for quality. The company is a really good example of successful British manufacturing with high quality products and an effective operation.”

Richard Soper, chief executive, Worcester, Bosch Group, said: “We were pleased Chris Huhne took the time to see for himself the level of time and investment we give to ensuring that we continue to manufacture the most efficient boilers we can.”

Richard Soper gives Chris Huhne a tour

Chris Huhne leads a discussion on some of the industry’s key issues

Energy efficiency – installers to advise The Chartered Institute of Plumbing and Heating Engineering (CIPHE) believes it is now imperative for plumbers and heating engineers to advise members of the public about reducing energy bills. CIPHE says energy saving is preferable to providing short-term financial relief, although it

recognises there is a need for both.

“Plumbers and heating engineers have a lot of expertise in these matters,” reports acting chief executive, Kevin Wellman.

“Even simple jobs like explaining how people can adjust their thermostats effectively could really help.

I believe the industry has an obligation to help as many people as possible.”

Do you have an opinion on your role in energy efficiency?

Email jane @oilinstaller.co.uk

See you at Ecobuild OFTEC will be exhibiting at Ecobuild 2012, which takes place from 20th-22nd March at Excel in East London.

Joining OFTEC on stand S3040 in the south hall will be Clarehill Plastics, Warmflow, Firebird and EOGB Energy Products.

Ecobuild is one of the world’s largest events for sustainable design, construction and the built environment. This year, the show will feature more than 1500 exhibitors with free seminars and live demonstrations.

To register for free entry, visit www.ecobuild.co.uk 8 | Oil Installer Spring 2012

Key appointments announced

Regional inspectors required With both new business audits and periodic inspections now mandatory (see page 14), OFTEC is looking to expand its team of regional inspectors

Paul Rose has been promoted to technical director designate.

Paul has been part of the OFTEC technical team since 2005, and prior to that worked for a major oil boiler manufacturer. He has been heavily involved with the project to develop bio-liquids as an environmentally friendly alternative to kerosene.

Malcolm Farrow has been appointed as marketing and communications manager.

Malcolm joins OFTEC from the Suffolk Coast and Heaths Area of Outstanding Natural Beauty team where he was responsible for communications.

In his new role he will manage all aspects of marketing and communications including PR, websites and events.

Full-time inspectors are needed in both the south of England and the Lake District, whilst part-time inspectors are required in the Republic of Ireland and the Channel Islands.

Meeting registered technicians on a daily basis, inspectors are responsible for auditing business procedures and checking individual technical competence.

A good knowledge of industry legislation is required.

With experience of the oil heating industry, all members of the inspection team are able to pass on helpful hints to technicians during inspections.

Interested in becoming an OFTEC inspector?

Call 0845 65 85 080 for a full job description. Applications should be sent with a CV and covering letter to HR Department, OFTEC, Foxwood House, Dobbs Lane, Kesgrave, Ipswich IP5 2QQ, or by email to mcurrie@oftec.org.

Could you be a member of the OFTEC team of regional inspectors?

See page 32

S! E CK OR HO UT M L S N O IN! NO BIL RU GA Y R A ST VE IL NA NE OF O

Introducing

Harlequin is proud to announce the arrival of the first intelligent oil tank on the market. iTanks not only monitor your oil level, but actually ANALYSE your oil spend and usage per day/week/month and year.

So what makes iTank so unique?

Every iTank™ is supplied with i-Track radio remote intelligent monitoring technology as standard. This revolutionary technology updates information on your oil level over 200 times per day - helping you track and control your oil usage and spend amongst many other benefits!

iTank’s unique ‘days to empty’ feature also ensures that not only will you avoid running out of oil, but you can actually plan your oil purchases according to price trends!

• TRACK SPEND - AVOID BILL SHOCK

What’s more - iTank™ Pro models are the most SECURE tanks on the market, featuring an external tank lock, an internal alarm lock (100db Alarm) and a sudden loss / theft alarm system – all as standard!

• TRACK LITRES REMAINING - CONTROL USAGE • TRACK DAYS TO EMPTY - PLAN EXPENDITURE • TRACK CO2 EMISSIONS - REDUCE CARBON FOOTPRINT

from Clarehill Plastics Limited 21 Clarehill Road Moira Co. Armagh Northern Ireland BT67 0PB T: +44 (0)28 9261 1077 F: +44 (0)28 9261 2672 E: info@clarehill.com W: www.harlequinplastics.co.uk

Oil Installer Spring 2012 | 9

Industry News - online, on hand, on top of CO poisioning

CO – beware the “silent killer”…

OFTEC Inspection Services has recently investigated two cases of carbon monoxide (CO) poisoning

1.

The first incident was reported by a householder, and when OFTEC’s regional inspector visited the site, he discovered a second-hand vaporising range cooker which had been installed by a non-registered installer several years previously. It had been serviced annually, also by a non-registered engineer. For some time, the householder had thought that it gave off fumes, but became increasingly concerned when her CO alarm went off. She contacted her local authority who tested and found high levels of CO in the room.

On examination, an OFTEC inspector found there was no flue liner fitted, and that the overall flue system was ineffective for this type of appliance. There was also inadequate ventilation to the room. OFTEC recommended that a new flue system and adequate permanent ventilation should be installed by a registered technician, and that, on completion, the appliance should be recommissioned and a flue interference test carried out in accordance with correct procedures.

2.

The second case occurred late last year; OFTEC was part of a joint investigation team with the Health and Safety Executive in Northern Ireland (HSENI). A pressure jet appliance had been installed at a domestic property some two years earlier, and had been serviced by unknown engineers. On this occasion, the CO problem was due to a low level flue, terminating in an enclosed outbuilding where fumes were accumulating without dispersing freely into the atmosphere. The HSENI is currently dealing with this incident.

“Although CO incidents with oil are rare,” says OFTEC, “Everyone should be vigilant for the signs of potential poisoning. CO is sometimes called the silent killer because it cannot be seen and is odourless. An incorrectly installed appliance or flue system could be leaking the lethal gas for years without being detected. Encourage all your customers to fit a good quality CO alarm, such as the Fire Angel which is available from OFTEC Direct.”

If you think a CO incident has occurred, or need further advice, please contact OFTEC on 0845 65 85 080.

www.oftec.org – OFTEC – on hand in new and updated Harrogate Look out for OFTEC’s brand new website which goes live in the very near future The website’s design and content have been thoroughly overhauled, navigation improved and new features added. The password protected areas contain more information for technicians where – for greater ease and speed – technicians can now update their own details.

The site also offers oil heating consumers an updated information resource including details on competent persons and revoked registrations.

10 | Oil Installer Spring 2012

Are bioliquids a viable alternative to kerosene? Just one of the questions you can ask OFTEC at this year’s FPS Expo

FPS Expo – a Federation of Petroleum Suppliers event – takes place in Harrogate on 18th and 19th April where OFTEC staff will be on stand C13 with the latest news from the oil heating/ cooking industry and up to date advice on current building regulations.

Almost two million homes in the UK and Ireland use oil for heating.

With very few system modifications, OFTEC says most of these homes could easily switch to a bioliquid. Plus, the cost of conversion is considerably lower

than replacing an existing system with alternative technologies, such as biomass or heat pumps.

Also on the stand will be a selection of OFTEC publications including technical books, factsheets and Home Guides. See also the new edition of the OFTEC Direct catalogue with its full range of products specifically designed for those installing, servicing or commissioning oil heating systems. www.fpsshow.co.uk

*" *% '* * $ * *' ! * * " '* * " *$ ! "

*' #* $ $ * *" * * * " # !" #" * #!" ' *

*! *" * * * * !*" * $ "* *' #

( $ * * & " !* $ * $ '* !! * # "* *! $ *' #* # *

( * * * * #!" '* " *% ! !* *! ! ( * # * *" * & * * !"* " * *" * #!" ' ( & "* "% * "# "'*)* $ ' * * ' % * *"

To exhibit at FPS EXPO 2012 call +44 (0)1565 631313

Federation of Petroleum Suppliers

Industry News - meeting energy demands

Meeting renewable energy targets Former energy secretary, Chris Huhne reaffirmed the coalition’s commitment to meeting EU renewable energy targets.

There is an EU-wide target to source 20% of energy from renewable sources across the European Union by 2020; the UK’s share is to generate 15%.

“I do not want the UK to be left behind by turning our back on the green economy, said Chris Huhne. “Our renewable target is less demanding than other EU member states but the effect is bringing real jobs and investment.”

Latest research from DECC shows that so far this financial year, companies have plans to invest almost £2.5billion in renewable energy projects in the UK, with the potential to create 12,000 jobs.

The government published a Renewable Energy Roadmap in July 2011, setting out plans to meet the target. www.decc.gov. uk/en/content/cms/meeting_energy/ renewable_ener/re_roadmap/re_roadmap. aspx A European Commission report on renewable energy progress showed that the

I do not want the UK to be left behind by turning our back on the green economy

UK achieved a 27% increase in renewable energy consumption from 42.6TWh in 2008 to 54TWh in 2010 – representing 3.3% of total energy consumed.

Reducing carbon On 1st December, DECC published its Carbon Plan which sets out plans to halve emissions (from 1990*) in the fourth carbon budget period of 2022 to 2027. This is to be achieved by:

Insulating all cavity walls and lofts, where practicable Completing … …up to 1.5 million solid wall insulations by 2020 …a further 1 – 3.7 million solid walls by 2030 …100,000 low carbon heat installations by 2020 …up to 8.6 million low carbon heat installations by 2030 as natural gas heating is phased out by 2050 Building between 40 and 70 GW of low-carbon electricity capacity by 2030; on the path to 90 and 140 GW in 2050 Reducing average new car emissions from 144g CO2/km today to between 50 and 70g CO2/km in 2030, on the path to decarbonising road transport by 2050

* Carbon emissions have already been cut by more than 25% on 1990 levels.

Vision or mirage?

Cash back offer Install a Worcester, Bosch Greenstar oil-fired boiler and/or a Greenstore, Greensource or Greenskies product in your own home during 2012 and claim up to £400 cash back. www.worcester-bosch.co.uk/ cashforinstallers

12 | Oil Installer Spring 2012

The Renewable Energy: Vision or Mirage report was published at the end of last year by the Adam Smith Institute and the Scientific Alliance. Martin Livermore, joint author of the report, said: “The facts actually show that current renewable technologies are incapable of making a major contribution to energy security and – despite claims to the contrary – have only limited potential to reduce carbon dioxide emissions.” www.adamsmith.org

Grant Vortex The highest efficiency oil-fired condensing boiler available today!

Outputs from 12-70kW Biokerosene compatible Internal and external, floor standing boiler house and wall hung options 89.5 - 93.3% Gross SAP2009 annual efficiency Award winning Grant stainless steel heat exchanger Whisper quiet operation Two year product guarantee

To be even more energy efficient, why not supplement your heating with a Grant air source heat pump or solar thermal?

Call our Sales Team for information on: 01380 736920

For the latest Grant news, visit our website:

WWW.GRANTUK.COM

Registration News – new criteria and a workmanship warranty

Changes Just joined to OFTEC OFTEC? registration The Department of Communities and Local Government has recently introduced new authorisation criteria for all competent persons schemes. As a result OFTEC must introduce new rules for registrants. The United Kingdom Accreditation Service (UKAS) monitors all competent persons schemes, and will be checking to see that OFTEC works to the new criteria.

Some of the new criteria is already part of OFTEC’s rules of registration, which, in future, may be enforced more rigorously. However, a new requirement is that each registered business operating in England and Wales must offer customers a workmanship warranty, details of which appear on the opposite page.

Other criteria include:

Access to appropriate test instruments for the scope of work Certification and reporting Sufficient levels of insurance Details of how complaints are handled and recorded Health and safety policy Details of professional development and future requirements Technical reference document requirements

Many registered businesses will already have some or all of these elements in place.

OFTEC inspectors are required to check everything as part of the new business audit which businesses receive within three months of joining OFTEC. Inspectors also check all criteria on subsequent periodic inspections.

All relevant information is contained within the rules for registration R100 document, which can be downloaded from the OFTEC website.

14 | Oil Installer Spring 2012

Documentation check

Companies that register with OFTEC for the first time must have a new business audit carried out by an OFTEC Inspector within three months of joining, except for businesses in the Channel Islands or Isle of Man. The audit is designed to ensure businesses are up to speed with the latest legislation and environmental issues. Regional inspectors also invite questions about OFTEC registration and works notification.

Although the audit is a relatively straightforward procedure, OFTEC recommends that businesses are prepared for the process by having the following documents readily available.

In addition to the documentation check, the inspector will need to visit a recent installation or servicing job, depending on the scope of registration held. As well as demonstrating competence to the inspector, technicians will need to have available the correct control documentation as listed right.

A current OFTEC identification badge.

Notify a lost badge on 0845 65 85 080.

A current set of OFTEC technical books covering your scope of work. Check www.oftec.org for the latest editions and download any free updates. New books can be purchased from training centres or from OFTEC Direct at www. oftecdirect.org. As an alternative to OFTEC technical books a reference library of building regulations and building standards should be held.

A certificate of public liability insurance (£2m or €2.8m).

A certificate of workmanship warranty insurance for businesses in England and Wales.

A valid calibration certificate for any electronic test equipment.

Evidence of a complaints procedure and a record of any past complaints.

Evidence of use of control documentation for completed jobs (e.g.

TI/133. CD/10, CD/11, CD/30).

A current copy of R100 rules of registration.

Type of installation

Control documentation required

OFTEC documentation reference

Oil storage tank

Spillage and fire risk assessment

TI/133D or TI/133ND

Installation completion form

CD/10

Combustion appliance

Installation completion form

CD/10

Non condensing boiler installation within an existing dwelling

Condensing boiler installation assessment form

CD/30

Commissioning or servicing

Service and commissioning form

CD/11 or manufacturers log book or Benchmark etc.

Technicians will also need to demonstrate that any relevant work has been registered with building control, either by using the OFTEC works notification system, or directly to local authority.

Regional requirements may differ: Region England and Wales Channel Islands and Isle of Man Scotland

Documentation required Evidence of self certification using the OFTEC works notification system A Building Warrant (for further information see OFTEC Information Sheet Pub/33 Changes to the Scottish Building Standards)

After the business audit, the OFTEC inspector will give feedback and recommendations, along with a copy of an R553 audit report. New business audits are designed to help technicians get the most out of their OFTEC registration straight away.

New workmanship warranty OFTEC registered technicians can offer customers many benefits over non-registered competitors. They can prove that they are trained and assessed to professional standards, and that they hold appropriate insurance to work in the customer’s home. And now they are able to offer a further benefit to assure customers – the new workmanship warranty and deposit protection scheme.

all new OFTEC registrants* must provide a workmanship warranty for their customers New government legislation for England, Wales, the Channel Islands and the Isle of Man means that all new OFTEC registrants must provide a workmanship warranty for their customers. *Existing OFTEC registrants will have a phase-in period which OFTEC will agree with government.

The scheme covers the cost of rectifying any defective work directly attributable to installation work which falls within building regulations. If the original OFTEC registered installer is no longer trading, a householder can claim up to

£10,000 for any rectification work which might be required.

The warranty lasts for six years from the date OFTEC receives the job notification, and is fully transferable if the property is sold during that period.

Protection for both customer and technician “This is a big benefit that registered technicians can offer their customers,” OFTEC says.

“By explaining that their work will be fully covered should they stop trading, the customer will have total peace of mind about their oil heating installation.”

The scheme is available from OFTEC Insurance Services and costs from £52 per annum for an OFTEC registered business, and also includes free deposit protection insurance.

This protects the deposit paid by the customer up to 25% of the contract value, to a maximum of £10,000, until work commences to a maximum of 90 days.

Pay as you notify Technicians need to notify all work covered by building regulations in England and Wales.

The OFTEC online system allows a ‘pay as you notify’ facility, using a credit or debit card, once a job is notified. Online notifications cost £2.50 per job – multiple notifications can be submitted together. Technicians can also set up a direct debit system to notify jobs online, at the same cost. Payment is debited from a designated bank account each time work is notified online.

Oil Installer Spring 2012 | 15

Irish News – assisting the community and OFTEC members

Working with county councils In conjunction with several manufacturers, including Adey and Worcester Bosch, OFTEC Ireland staff have delivered presentations to a number of Irish county councils, covering changes to Part L, and the proposed changes to Part J, of the Republic of Ireland Building Regulations.

several councils agreed to specify OFTEC registered technicians OFTEC’s Damien Keenan (5th from left on back row) with building control officers in Nenagh, County Tipperary

The presentations also highlighted the benefits of using OFTEC registered technicians and how costs for maintaining central heating could be reduced by correct installation and servicing. As a result, several councils agreed to specify OFTEC registered technicians for servicing and installation works in future contracts.

Aimed at key personnel, including architects, building surveyors and clerks of works, the events have been well attended and, to date, have been held in counties Carlow, Monaghan, Sligo, Meath, Kildare, North and South Tipperary and Clare, with plans to visit all remaining councils in the Republic during 2012.

Pay as you go for heating oil customers Northern Ireland minister for social development, Nelson McCausland, has given the go ahead for trials of a new “payas-you-go” system for heating oil customers.

At present there are payas-you-go schemes for both electricity and gas in Northern Ireland, but no equivalent for oil – the main heating fuel for two-thirds of the province’s homes.

Developed by Kingspan Environmental, the new system

a much-needed boost for Northern Ireland households which experience fuel poverty will allow householders to pay for the oil in their tank as they use it. Customers would purchase credit, in the same

way as they do with their electricity keypad meter. The credit would be converted into litres, based on the actual cost of the oil in their tank, plus an administration fee. Once the credit has been authorised, a controller at the oil tank would allow oil to flow through the meter to provide heating.

Trials are scheduled to start soon, and, once in full operation, the new system should offer a much-needed boost for Northern Ireland households which experience fuel poverty.

(l-r) Charles Burns, commercial director of Kingspan Environmental; David Blevings, OFTEC’s Ireland manager; social development minister, Nelson McCausland; Philip Browne, brand director of Kingspan Environmental; and Jillian Ferris, client and stakeholder director of Carillion Energy Services.

16 | Oil Installer Spring 2012

Direct debit option available for Irish registered businesses OFTEC registered businesses in the Republic of Ireland can now choose to pay for their registration by direct debit. If the total amount of fees exceeds the equivalent of £300, technicians can also spread the cost of their registration over four payments, with a small administration charge.

The option to pay by direct debit is already available for UK registrants, who have found that spreading the cost helps with cashflow. For further information, contact registration@oftec.org

Boiler News – combining oil with renewables

North Yorkshire weather defences Oliver Carter Plumbing & Heating of Bedale, North Yorkshire, has completed an unusual high-spec heating installation for a complex of three luxury holiday cottages which enjoy panoramic views of the Yorkshire Moors, including the famous White Horse.

Ollie Carter specified a Firebird Enviromax 73kW boilerhouse model, together with four solar panels and weather compensation controls, to meet the central heating and hot water needs of the three cottages, and to allow for potential future additions.

An installation for maximum efficiency of heating and hot water supply Working with Kendal Homes of Sowerby – the company which undertook the barn conversion to create the cottages – Ollie and his team installed two 2-panel vacuum solar panels, 350m2 of underfloor heating on the ground floor, 30 radiators with TRVs upstairs, and two 300 litre hot water storage cylinders, in an integrated system designed

for maximum efficiency of heating and hot water supply.

“Because of the size of the installation, larger pipework was required,” says Ollie.

“We take pride in the work we do, so all the pipes were laid out neatly and all valves and controls are fully accessible. There are plenty of valves designed into the installation, so each heating system can be isolated if required.

“We chose the Firebird Enviromax boiler because it is a high quality unit with good installation features. In fact, we think it’s the easiest boiler on the market to fit. We also get excellent service support from the Firebird regional sales manager and from our plumbers’ merchant, who usually have good deals for us.”

The cottages are now fully finished and available for rental all year round. And with the strong, cold winds which often sweep the North Yorkshire moors during the winter, a good reliable and efficient heating system is an absolute must!

The heating and hot water system for the barn conversion features a 73kW Firebird Enviromax boiler in a separate boiler house serving all three properties

Lancashire firm grows business Established in 1972, specialist heating engineers, M H Cragg and Sons, has more than 40 years of industry experience.

Based in Bolton, the company operates predominantly in the north west of England, serving the Wigan, Chorley, Preston and Manchester areas. The company has grown from a small family firm in to a wellrespected business with a large base of approximately 3000 customers, all on either service or insurance plans.

Installation manager, Neil Carter describes M H Cragg as: “Mainly a gas and oil business offering full servicing, installations and breakdown repair plus the provision of various levels of insurance cover.”

M H Cragg is a sister company of Ground Heat Installations, which won the £10,000 installer of the year prize at last year’s Renewable Roadshow awards.

Whilst the two companies occasionally work together on larger projects, they do tend to stick to their core competencies, as Neil explains: “If we get offered any renewable 18 | Oil Installer Spring 2012

work, we refer this to Ground Heat, as they’re better positioned and experienced within that market. This relationship works both ways as they frequently direct oil and gas work to us.”

Moving forward, Neil hopes: “To continue growing our key business, which is in servicing and installation works.”

M H Cragg has been serving the north west for over four decades

Boiler News – 1.5 tonnes of CO2 saved for every boiler replaced

The argument for a new boiler scrappage scheme In 2010, the government’s boiler scrappage scheme succeeded with all that it set out to achieve, says Worcester, Bosch. Almost 120,000 inefficient boilers were replaced, potentially saving 889,635 tonnes of CO² – as well as creating business for installers, and saving the average home £290 a year on heating bills.

With the sale of boilers currently down by 6%, and the number of households in fuel poverty up to 24%, Neil Schofield, Worcester, Bosch Group’s head of external and government affairs, looks at how a new boiler scrappage scheme would benefit the struggling UK economy…

The results of the original boiler scrappage scheme speak volumes, not least for being the most successful energy saving initiative in the last 10 years, but also for

replacing it with a new, high efficiency model.

The first of 120,000 inefficient boilers gets scrapped under the government’s 2010 scrappage scheme.

There are still 3.5 million G-rated, or older, boilers in use across the UK

generating much needed consumer demand to help kick start the economy. In times of economic uncertainty, the consumer is always on the lookout for a good deal, which is why the scheme did so well – offering a £400 refund from the government for scrapping a G-rated boiler, or older, and

01202 876 790

More work for installers The scheme incentivised home owners, who would probably have repaired their existing inefficient boiler, to install a new one.

What’s more, 77% of those who claimed the scrappage voucher had additional energy efficiency measures fitted, providing an extra boost for the economy and a reduction in carbon emissions. Inevitably, the increase of demand for new boilers led

77% of those who claimed the scrappage voucher had additional energy efficiency measures fitted

Danfoss Nozzel ½ - 18 gallon £3.50 Delavan Nozzels £3.75

www.totalboilerspares.com NEW ONLINE STORE

BFP11 Pump £36.50 BFP21 Pump £36.50 BFP41 Pump £37.50 BFP Coil £14.00

SIMPLE ORDERING & PAYMENT SYSTEM

BFP Stem £16.50

EVERYTHING BELOW TRADE PRICES

DKG972 MOD10 £35.00

OVER 10,000 LINES IN STOCK NEXT DAY DELIVERY VIA UPS (B4 NOON AVAILABLE)* ORDERS OVER £180 – FREE CARRIAGE* ORDERS RECEIVED BEFORE 3PM SENT SAME DAY* STOCKISTS OF ALL MAJOR OIL & GAS BOILER SPARE PARTS

MMG810.1 MOD43 £100.00 TF832.3 £25.00

Excellent Trade Discounts

Prices available while stocks last

*STOCK PERMITTING – MAINLAND UK ONLY For Scottish Highlands / Islands, Eire, Channel Islands or Europe please contact us for details

20 | Oil Installer Spring 2012

to more work for installers, with 92% of installation companies benefitting across the country.

The end to the scrappage scheme saw a decrease in new installations, and homeowners reverting back to repairing their old boilers – leaving installers with very reduced work, mainly based around distressed repairs or, on the rare occasion, a reluctant replacement of boilers that are simply too old to function.

There are still 3.5 million G-rated, or older, boilers in use across the UK, which indicates there is an argument for bringing back the boiler scrappage scheme, or similar, in England as has been done in Scotland, Northern Ireland and Wales. Looking at the success of the original scheme, this argument is a strong one. Restarting the scheme would be a win, win situation.

“Re-starting the scheme would be a win, win situation” says Worcester, Bosch With a new injection of consumer demand there will be a surge in work for installers, safeguarding 150,000 jobs

in the industry, which is a significant benefit to the economy as unemployment figures continue to rise to an unprecedented high.

Running further boiler scrappage schemes simply makes sense There would be virtually no cost to administer and advertise the return of the scheme as the original scheme was promoted, very largely, through word of mouth from participating installers.

Replacing an inefficient boiler with a new model can save the average household £290 a year. With more money to spend in other sectors, this would inject more money into the UK economy, and help to pull some of the 5.7 million homes out of fuel poverty.

As these figures demonstrate, reintroducing the boiler scrappage scheme would be a huge advantage for the UK’s struggling economy, without even considering the environmental benefits the scheme offers – such as the 1.5 tonnes of CO² saved for every boiler replaced. The carbon saved during the original scheme was the equivalent of every car in the country being idle for four months.

HRM training Norfolk-based HRM Boilers now offers a range of OFTEC training courses from its facilities in Attleborough. Managing director Simon Eastwell has partnered with Simon Butcher of the Professional Training Centre; courses, which began in December will run on a quarterly basis. Two-day courses cover OFTEC 101, 105E and 600A with one and a half days assessment. The basic cost is £560+VAT with relevant books and certification chargeable separately. Training is complemented by an improved efficiency Walstar Combi and the HRM X-ternal range of oil fired boilers.

For more training news see pages 30-33. www.hrmboilers.co.uk Oil Installer Spring 2012 | 21

Boiler News – providing customers with an end to end service

Moorland grows its boiler service division At a time when many fuel distributors are abandoning boiler servicing, citing cost and time issues, Devon-based Moorland Fuels is continuing to grow its boiler service division because the company believes in meeting a customer’s complete heating needs “Providing the best quality of service for our customers is never a hassle,” said Moorland Fuels managing director, Ben More. “We believe our boiler servicing team is vital to the customer-centric approach provided by Moorland Fuels.

“When a customer comes to us, we can provide their fuel, install their tank and boiler, and maintain a comprehensive service package thereafter. It saves the customer time and money because they don’t have to call numerous companies, and we can make sure our customer has quality products and service.”

Since the launch of the boiler servicing division 18 months ago, 3% of Moorland Fuels’ customers have started using the service – a number that is steadily growing. The company has also seen a rise in the number of new customers initially approaching Moorland Fuels for boiler servicing, and then buying fuel or a tank.

Mark Quelch , a member of Moorland Fuels’ servicing division

Fast response, regular training “We offer a 24-hour call-out service for breakdowns,” said head of boiler servicing, Ivan Bridle. “The after-hours call typically comes through to me and I assign an engineer.

Depending on the nature of the issue, an engineer can respond within two hours.”

The company has a core team of four engineers, but has the ability to supplement that number as required. All team members are OFTEC and Safe Contractor registered, and are strategically located throughout

the company’s service area of mid, west and south Devon, enabling them to respond quickly and efficiently to callouts.

The Moorland team stays up-to-date with the latest boiler technology and legislation through regular training and continuous professional development, and the company’s engineers are also qualified to service AGA and Rayburn appliances.

“We strongly believe our engineers should be trained by AGA and Rayburn so they can

properly service these cookers,” explained Ivan Bridle. “We have a lot of experience in this area, due to the large number of these appliances in this part of the country.”

Ben More added: “Part of the reason we started our tank replacement and boiler servicing divisions was to help our customers get the most out of their fuel. As a fuel company, it is vital that we provide our customers with an end-to-end service.”

Ivan Bridle, head of Moorland Fuels’ servicing division

Advanced heating oil “Glowmax produces less carbon than standard kerosene, leading to a better performance from oil-fired appliances,” says Steve Gettings, commercial manager, Butler Fuels.

“Exclusive to Butler Fuels, the new Glowmax has been successfully trialled and tested at AGA laboratories over a 14 month period. Although slightly more expensive than standard kerosene, we’ve found customers are willing to pay extra for a cleaner, smoother running system.”

AGA sleeve burner using standard kerosene AGA sleeve burner using Glowmax

22 | Oil Installer Spring 2012

Hot Technical Topics

Solving water in fuel issues The incidence of water in fuel is increasing across all fuel types says Fuel Additive Science Technologies (FAST) which has been observing field samples over the past year

FAST is presently researching into how even trace quantities of biofuel can influence the water contamination of fuels, with a view to developing more advanced additive packages.

An inevitable consequence?

“The water phenomenon is probably the inevitable consequence of the addition of biofuels,” said FAST consultant, Bill Hodgson.

“Water can be present in fuel but not be “visible” as free water at the bottom of a sample.

The specification for kerosene – BS 2869:C2 – currently has no upper limit on water content

“A 2% bio-diesel blend (B2) can contain up to 1000 ppm water – 5 times the 200ppm BS EN 590 specification – and still remain clear. Water solubility also depends upon ambient temperature; fuel can pickup water during the day and drop it out of solution at night when the temperature falls.

“The specification for kerosene – BS 2869:C2 – currently has no upper limit on water content of fuel ex-refinery and our field samples show that >100ppm water is not uncommon at point of use. The problem begins when biofuel blends leave the refinery and the chances of the fuel coming into contact with humidity in the atmosphere or condensed water vapour in storage tanks increase dramatically.”

Taking care of problems Designed to separate water from fuel and deter the growth of micro-organisms,

a number of FAST products have been formulated to take care of common water problems and protect the fuel end user.

“We firmly reject the notions currently doing the rounds that water dispersed in fuel or the creation of fuel-water micro-emulsions is in any way beneficial to vehicle operability or engine performance. In the coming months, we predict more field problems due to water contamination and the increasing need to use preventative additives to combat this,” Bill added. www.fastexcocet.co.uk

Oil Installer Spring 2012 | 23

Hot Technical Topics

Following correct oil spill procedures Oil spillage incidents are very unlikely to occur in correctly installed systems which are inspected and maintained regularly.

However, when an incident does occur, OFTEC is often the ďŹ rst port of call When dealing with an oil spill a speedy response is vital to avoid or reduce the risk of pollution. The photograph below shows the damage done by 2000 litres of kerosene.

Avoiding or reducing the risk of pollution The ďŹ rst priority is to prevent a further release of oil from the source e.g. oil storage tank, supply pipe, etc. and to clean up any obvious oil present on surfaces by using absorbents.

Next, the householder or property owner should be advised of the need to call in specialists to determine if any damage has been caused by the oil, and to immediately notify insurers. The incident should then be reported to the regional Environment Agency or local authority.

Reporting an incident Below are the procedures for reporting oil spills to the relevant authorities.

In the UK – any volume of oil lost to ground should be reported to the regional Environment Agency, via their pollution incident hotline number: 0800 80 70 60.

In the Republic of Ireland – such incidents should be reported to the local authority, contact information for which can be found in the Regional Requirements section of OFTEC technical books 3 and 4, and in the OFTEC oil heating pocket guide.

Renewable ENERGY INSTALLER THE BUSINESS OF

MICROGENERATION

Alan C Black FIDHEE MCIPHE Dip C Eng

SOLAR THERMAL SOLAR PV BIOMASS HEAT PUMPS WIND HYDRO

YEARBOOK & DIRECTORY 2012 DESKTOP INFORMATION

Confidential bespoke technical domestic/ light commercial oil & bio-liquid heating & cooking sector consultancy services. “Working with our clients evaluating potential threats and opportunities specific to their individual visions, products, goods and services.�

Mobile: 07516 371 992 E-mail: gnosisconsultancy@btinternet.com Web: www.gnosisconsultancy.vpweb.co.uk SKYPE: alanblack.amb AMB Business Enterprises Ltd Š Company No. 7440511 Vat Reg. No. 103 5656 37 T/A Gnosis Consultancy Services – Office: 01778 346294

24 | Oil Installer Spring 2012

%! ! & " ! ' " ! " # " & " ! ! $ & ! ! &

It’s a jungle out there!

With spring on the way, trees, bushes and plants will soon wake from their winter dormancy and resume their growth spurt. As pleasant as this may be, areas adjacent to oil storage tanks often become engulfed by foliage, limiting access for maintenance, presenting a potential ďŹ re hazard and, ultimately resulting in non-compliance.

OFTEC points out that BS 5410 requires any foliage or screening – which does not form part of a building or boundary – to be separated by at least 600mm from an oil storage tank. Therefore, it is important to remind customers to keep any plants, which are near tanks, well trimmed.

Plant growth can also encroach on a ue terminal.

Partially blocked ues can cause

Home extensions without compromising installations Many householders are choosing to improve rather than move in the current ďŹ nancial climate

Spring – time to remind customers to keep trees and plants growing near oil tanks in trim

stagnation of combustion gases, which may enter the property through open windows or even be re-circulated through the air intake on a balanced ue boiler.

OFTEC therefore recommends that new installations should be planned and sited to reduce the risk of obstructions forming in front of a ue outlet.

As a consequence, OFTEC’s technical department is receiving more enquiries from technicians about whether the compliance of an existing oil installation would be inuenced by plans for an extension to a property.

Building regulations clearly state that new building work must not make existing services less compliant than they were prior to commencement. This puts the onus on those responsible for the building work to ensure compliance is not compromised during or upon completion of their work.

Where technicians come across existing installations which are non-compliant, OFTEC advises that they should inform the householder in writing, using a CD/11 report form. Further information on reporting procedures, following identiďŹ cation of potential or immediate risks, can be found in OFTEC technical books 3 and 4 under OFTEC procedures.

Formerly manufactured by

&#/*,01 1'!9 '/#9 )3#9 If you take pride in your work, you’ll only want the best capillary fire valve available – the one that guarantees more safety, flexibility and reliability with less hassle. That fire valve is made by FuelStop.

6 &#9,+)59! -')) /59$'/#93 )3#91, *##19 9 9- /19

6 &#94'"#019/ +%#9,$9-'-#9!,++#!1',+0 +"9! -')) /59)#+%1&09,+91&#9* /(#1

6 #0'%+#"9 +"9* +2$ !12/#"91, #)'*'+ 1#9+2'0 +!#91/'-0

6 '-#9!,++#!1',+09,$9 8 79 +"9 8 79 #+02/#9,-1'*2*9$),49/ 1#

6 &#9 2#) 1,-9 9'09)'.2'" $'))#" +"9,$$#/09*,/#9/#)' ')'159'+9 )) 4# 1&#/091& +9% 0 $'))#" -/,"2!10

6 2'1 )#9$,/92-91,9 9 /9,$9'+!,*'+%9 $2#)9-/#002/# 6 0591,9'+01 ))

1 9 9 9999$ 9 9 999# '+$, $2#)01,- !, 2( +2$ !12/#"9 59 2#) 1,- 9 +'19 9 ,,")#59 /(9 01 1# 999 9 # "'+%9 , " 9 ,,")#5 9 # "'+% 9 #/(0&'/#9 9

Oil Installer Spring 2012 | 25

Readers’ Questions

Readers rally round to help installer colleagues The last issue of Oil Installer (Winter 2011 page 25) featured a question from Devon-based technician, Tim Barrett, regarding a persistent problem he had encountered with wall-hung boilers

Tim told Oil Installer: “I’ve been called out to two boilers lately, with what would seem to be a similar problem. The boilers run for anything from a few hours to a few days before locking out on the burner. I first checked for water in the oil tank, and then the filters and oil line for blockages.

When there did not appear to be a problem in those areas, I changed the oil solenoid, photo cell and burner control box, to try and eliminate the possibilities.

Still no joy. As both boilers are wall hung (a coincidence?), I have checked the non-return values on the oil line also. Still the problems persist. Any suggestions fully appreciated.”

Fuel quality?

An immediate response came from Neil Ryding, managing director of Fuel Additive Science Technologies (FAST), suggesting that some such problems can be associated with fuel quality and “microscopic particles being carried over from the refinery processes.” See also the article Solving water in fuel issues on page 23.

More suggestions…

However, since Tim’s problem appeared in print, other readers have stepped forward with their suggestions.

Opinions still flow First featured on page 16 of Oil Installer’s summer 2011 issue, the Oxyvent system continues to pique the interest of installers Simon Willett of Hertfordshire based Willett Technical Services, was intrigued by Oxyvent’s claims: “This discussion continues to underline the difference between installers who understand system sizing and design, and those who screw boxes to the wall,” says Simon.

“The Oxyvent, is in effect, a low loss header (as Oxyvent happily confirmed) and as such, is an order of magnitude, more expensive than implementing such a design/ layout/functionallity in pipe and fittings.

If installers fitting Oxyvent systems don’t understand LLH/closely spaced tees/pump

26 | Oil Installer Spring 2012

Ignition coil?

William Marrs, an experienced oil heating installer and plumber from Cumbria, commented: “The only part he possibly didn’t try was the ignition coil. On rare occasions they can fail when the boiler has heated them up, but work perfectly when cooled down.”

Joint condition?

Another oil heating installer, who prefers to remain anonymous, said: “With reference to Tim Barrett’s question about the problems with two wall hung boilers, I was interested to see that you wrote that he had checked the

interaction and separation, then it’s very likely that no significant benefits will be obtained, as they don’t work in isolation from good pipe layout and pipe/pump sizing.

This discussion continues to underline the difference between installers who understand system sizing and design, and those who screw boxes to the wall

“Neither is the Oxyvent new. The Dunsley Baker Neutraliser is a very close analogue (I’m surprised that they’ve not had anything to say on the matter) that also bridges the gap between thermalstore/ buffer vessels (which with minor differences, also utilise elements of the design concept) and low loss headers.

oil line non-return valves. These installations should be running on a two pipe fuel system and he should certainly check for air in the fuel pumps on these units. Also, the condition of any joints on the existing fuel line should be inspected. If there is any problem running a return to the tank, then an air eliminator could be fitted. Hope this helps.”

If you can shed any further light on the above problem – or if you would appreciate suggestions from readers on any problems you have encountered – do please get in touch. peter@oilinstaller.co.uk

“I’ve lost count of the number of systems I’ve worked on where 25kW+ condensing boilers are fitted to standard ‘sundial’ plans, incorporating the ubiquitous 5/6m head pump. Many of these boilers have minimum flow head losses greater than the pump fitted for the entire system!

Add in the low Kvs of the typical control valves and the undersized primary pipework, and the semi-functional result is inevitable.

“While we have a copious burden of regulation relating to the firing of heating systems, the complete lack of hydronic and control expertise required to practise makes a complete mockery of the drive for energy efficiency.” liz@oilinstaller.co.uk

makes a complete mockery of the drive for energy efficiency

Reader Competitions

Five Scruff work jackets to be won!

Not only is Firebird donating an iPad2 to an Oil Installer reader, there are also 5 Scruff work jackets in be won in the Firebird competition below.

All Firebird Enviromax condensing boilers now come with a digital control box developed exclusively for Firebird by Riello. This technological advance gives:(A) Greater accuracy (B) Speedier reaction (C) Self diagnostics (D) Increased efficiency (E) Reduced carbon emissions (F) Reliability and safety (G) Ease of use Simply select the TWO features you consider to be the two most important. Email your chosen features with corresponding letters marked 1st choice and 2nd choice to liz@oilinstaller.co.uk to arrive

by Friday 30th March.

A panel of industry experts has already chosen their two preferences. Every entry which matches these selected preferences, will be eligible to win one of the five Scruff jackets.

The five entries will be drawn and notified after the closing date.

Test your heating design knowledge…

It has been estimated that perhaps only as few as 10% of installers actually properly calculate heat losses and correctly size appliances and systems.

What does “1/R” equal?

If you can answer the above question, email your answer and contact details to admin@idhee.org.uk. The first correct answer drawn out of the hat on Friday 30th March will receive a FREE copy of the Domestic Heating Design Guide donated

by The Institute of Domestic Heating & Environmental Engineers (IDHEE).

The IDHEE promotes the correct system design and application of domestic heating equipment. “Correct design not only minimises running costs and reduces greenhouse gas emissions of installations, it also provides comfort engineering solutions for the end user,” says Bill Bucknell, chairman. www.idhee.org.uk

Fire up your imagination WIN this iPad2!

Oil Installer is on the hunt for the most interesting technical questions and opinions on industry issues.

The question or opinion judged to be the best will not only be discussed at the Oil and Renewable Energy Show – its sender will also receive an iPad2 courtesy of Firebird.

The oil-fired heating and cooking industry constantly asks questions and voices opinion – share these with Oil Installer now and a new iPad2 could be yours within a few weeks!

Send your question or opinion to jane@oilinstaller.co.uk to arrive by Friday 30th March

Oil Installer Spring 2012 | 27

Readers’ Questions

Riding roughshod With the issue of cowboys in the industry still very much a hot topic, Les Barclay of LBP Solutions asks: What is the role of OFTEC? It’s certainly not there to protect the technicians that pay its employees’ wages” “I’m outnumbered 4:1 by cowboys in my area, either claiming to be OFTEC registered, or using the OFTEC logo. All these companies can – and do – undercut me on price, but cannot be contacted when things go wrong.

One even uses a separate plumber to carry out boiler installation work, as he’s not very good at pipework!” He then issues commissioning paperwork using a false OFTEC registration number.

“I too have been through a lean period and have had to watch these cowboys taking my work. I know how bad their work is as I’ve had to clear up after them! The work has ranged from water and oil leaks to sooted-up boilers, full boiler replacements and worst of all – carbon monoxide leaks.

“No action has been taken” “I’ve contacted OFTEC – giving them the names, addresses and telephone numbers of these cowboys – only for them to ask for more and more information. I’ve even provided copies of adverts, photographs and falsified CD10s and 11s – but no action has been taken.

Do we have to wait until there is a tragic fatality caused by a badly installed/ serviced oil boiler?

“Why should I bother? These cowboys don’t follow the rules or pay out money on registration etc yet …they get more work than I do. I bother because I take pride in my work and feel a responsibility to my customers.

“All I want is support and protection for myself and my customers from OFTEC and the government – or do we have to wait until there is a tragic fatality caused by a badly installed/serviced oil boiler?”

28 | Oil Installer Spring 2012

OFTEC responds “Upholding high standards is vitally important to the oil heating industry, and nowhere more so than in the work carried out by installers and servicing technicians,” responds OFTEC’s marketing and communications manager, Malcolm Farrow “Poor quality work damages the reputation of the industry, risks losing customer confidence and can result in pollution – all causing considerable expense and inconvenience for the customer. In the worst cases it can even put lives in danger.

“Upholding standards is vitally “The risks posed by cowboys are well-recognised important,” says Malcolm by the industry. Through the OFTEC competent person schemes, we aim to promote the highest standards of professional practice, backed by a rigorous and thorough programme of training and assessment.

Poor quality work damages the reputation of the industry “OFTEC registration is a badge of honour and represents the gold standard for both technician and customer alike. But for some rogue traders, the opportunity to pass themselves off as OFTEC registered is a convenient and potentially lucrative option – and one that causes significant problems for the industry, and understandable frustration for genuine registrants. Often, OFTEC registered businesses find themselves being undercut by such traders, only to then get called in to put right problems, which can range from water and oil leaks, to boiler faults and, worst of all, carbon monoxide leaks.

So what can be done?

“Ensuring high standards of workmanship and maintaining consumer confidence in OFTEC registration are key priorities, so what can be done?

Gathering evidence “Unauthorised use of OFTEC’s trade mark logo is an offence and we always welcome tipoffs of suspected unauthorised use. But before anything can happen, it’s essential to have evidence. This can include obtaining copies of misleading advertising and documents, and photographs of OFTEC branded vehicles. Once we have suitable evidence, OFTEC will demand that any unauthorised advertising be removed. If unable to resolve the situation, we pursue the matter through Trading Standards. www.tradingstandards.gov.uk “Often, this process can take time, leading to accusations of inactivity, but OFTEC takes this matter very seriously, although we are constrained by local authority resources when it comes to policing this issue effectively.

Instances of non-compliant work by someone claiming falsely to be OFTEC registered should be fully documented. Again, OFTEC should be notified, together with the local building control team, who should be encouraged to take action.

A confidential whistle blowing system OFTEC has arranged with Local Authority Building Control (LABC) for a confidential whistle blowing system to be set up. A reporting form can be found can be found on the OFTEC website at www.oftec.co.uk/documents/OperationofCompetentPersonsSchemeV2.pdf.

OFTEC will then contact the relevant Local Authority on your behalf.

In addition, OFTEC is working to raise consumer awareness of the peace of mind that comes from using OFTEC registered businesses. As well as promoting the use of registrants as a way to guarantee the best possible standards of work and customer service, we also encourage home owners to check the technician’s ID – just to be on the safe side. As a last resort for anyone uncertain of a technician’s status, a quick call to our registration team can clear up any doubt.”

A rated pumps

Horror stories ?

On page 26 of Oil Installer’s winter 2011 issue, Roland Tremaine opened a discussion on A rated pumps

Not only does Oil Installer welcome readers’ technical questions and industry opinions, the editorial team is always delighted to receive your photographs.

View the latest installation horrors on page 46.

In response, Simon Willett of Willett Technical Services commented: “The pump utilises an electronically driven permanent magnet motor, which has well-documented performance advantages over the AC induction motor that has previously dominated the market, due to its simple and cheap design. For a given pump design and operating point, the pump will absorb a fixed amount of power – the efficiency gains will be from improved motor efficiency.

Cheaper and more reliable “The advent of cheaper and more reliable power electronics over recent years has brought these motor types into commercial reality.

It’s possible to buy domestic circulators with just the high efficiency motor technology.

“The second aspect of the market leading pump is that it utilises the electronics to provide a continuously variable speed drive to the motor, allowing a proportional or constant pressure output from the pump. When installed onto suitable hydronic systems this capability can be used to reduce pump speed and hence power consumption, as system load decreases.

“The specification of the pump is interrelated with the entire system design, and needs to be carefully chosen against all parameters, including efficiencies that change across its operating range.”

To see your photographs in the next issue’s Gallery, send your photographs to jane@oilinstaller.co.uk.

The New HeaƟng Store

Registration renewal Existing OFTEC registrations can be renewed over the phone by credit or debit card.

Annual registration Introduced last year and proving popular, fees start at £150 (£100 for business plus £50 per individual technician registration).

Five-year registration £620 (£410 for business plus £210 per individual technician registration). Direct debit options are also available for five-year registrations.

For further information visit www.oftec.org or email registration@oftec.org.

WWW.hwos.co.uk

For all your hea ng needs:

All products come with

Gas Boilers

Great Prices, Fast Free Delviery * and

Oil Boilers

Fantas c Service

Cylinders Hea ng Controls

AS STANDARD

Under Floor packs * see online for terms & condiƟons

Water Pumps Renewables Showers Bathroom Products Chemicals And so much more.............. See online for our latest offers

All this from one of the UK’s leading Independent Hea ng Parts Suppliers HeaƟng World of Spares Ltd

tel: 01388 760333 | fax: 01388 760489

Not Just for Heating Spares

www.hwos.co.uk | Email: sales@hwos.co.uk Oil Installer Spring 2012 | 29

Training – new courses, training centres, accreditation and seminars

New – OFTEC commercial A specialist training course and assessment for commercial appliance servicing/ commissioning has been developed by OFTEC and will soon be available at selected training centres.

The competence criteria includes techniques on commercial condensing pressure jet appliances (incorporating multi-stage burners) and pressure-jet warm air heaters larger than 70kW. Also included will be the safe electrical isolation of single and three phase supplies to boilers, dead-weight/fusible link fire valve systems and combustion analysis to manufacturers’ specifications. Email registration@oftec.org.

For commercial training in Ireland please see page 32.

OFTEC’s new commercial course – coming to selected training centres soon

National network

Firebird’s Brendan Twomey at the Leeds training centre

30 | Oil Installer Spring 2012

“We’re firm believers in training,” said Firebird’s national sales manager, Barry Brynildsen. “We’ve set up five new centres in conjunction with independent providers to offer a national network with convenient access to installers.” Training manager, Brendan Twomey officially opened the network in Leeds last year; other centres are based in Newcastle-upon-Tyne, Hastings, Norwich and Wootton Basset enhancing existing facilities in Kingsbury and at the Ivybridge head office. The centres are now presenting updated courses which give hands-on diagnostics, commissioning, product familiarisation and installation training. www.firebird.co.uk

Get G-One accredited Grant UK’s G-One accreditation scheme covers air source heat pumps, solar thermal, oil-fired and wood pellet boilers.* To become G-One accredited, installers must successfully complete the relevant course, hold adequate public liability insurance, comply with the Grant Accredited Installer code of conduct, and promote,

specify and install Grant products. *For wood pellet boilers, it is essential that installers first obtain G-One status before installing. Failure to comply could invalidate the appliance warranty.

Evening seminars OFTEC’s evening seminars have proved extremely popular. A recent event in Burgess Hill, Sussex was attended by 25 technicians at which colleagues from Clarehill Plastics and Anton joined OFTEC staff. Further events are being held at: Wednesday 7th March – EXETER, PGL Training, Thursday 26th April – BANGOR, Coleg Menai, Bangor Wednesday 16th May – HAVERFORDWEST, Pembrokeshire College

MCS advisor training Grant Training Academy’s latest brochure, which highlights recent courses, is now available for download. www.grantuk.com

GASTEC at CRE (GaC) has launched a new MCS advisor training programme. GaC identified a training gap following extensive market research, and a review of actual performance data from installed renewable energy appliances across the UK. Research revealed that many consumers considered there to be a disappointing breach between actual performance and their expectations – a case of over-promising and under-delivering, blamed on both retailers and installers. www.gastec.com

Oil Installer Spring 2012 | 31

Training

Flue gas course

Commercial oil in Ireland

Central Midlands Assessment and Training is now taking bookings for its CPA1 ue gas analyser course. MOT style certiďŹ cates are also available in OFTEC oil, domestic and commercial gas, and LPG. CMAT is conveniently situated in the Midlands, just ďŹ ve minutes from Junction 11 of the M42. www.cmat-ltd.co.uk

METAC Training has recently installed OFTEC 10-201 equipment to facilitate the introduction of commercial oil training and assessment in Ireland.

Since 2006, 600 oil technicians have been trained in the company’s domestic oil assessment and training area. The majority completed METAC’s 10-day course (OFT 50, 101, 105e and 600a).

A small number of qualiďŹ ed and experienced plumbers completed 5-day course (OFT 101, 105e and 600a). www.metac.ie

Send your latest training news to liz@oilinstaller.co.uk METAC’s new equipment installed recently

!"#

$ %

&

'

()$*

+

,

$

-

. /

$ 0

$

()$*

+

,

$

"

1

% 2

$ 0

$

!

34

5675$ 8 !"

$ 0

$

,

!"

1 8

$ 9

+

$ "

+

,

$

"0

/&

!" + / 1 9

3* 5::

'

; $

" #

$%&' (' %' $%$

! +,-.-+,

!"

) *

$ !"

<9 &

"

3 .

$ !"# &

$

32 | Oil Installer Spring 2012

Devon achievements Devon-based Petroc offers a range of courses for the plumbing, oil and gas heating and renewable energy industries and has a proven track record of high achievement.

Training and assessment centres at Barnstaple and Tiverton provide specialist workshops using the latest innovative equipment.

Environmental technology courses include solar hot water, heat pumps and small scale domestic photovoltaic. www.petroc.ac.uk

Partners in high standards The National Skills Academy for Environmental Technologies (www.nsaet.org.uk) and BPEC (www.bpec.org.uk) are working together to ensure environmental technology training and assessment provision meets the required high standards.

Both organisations have developed materials separately: Those National Skills Academy hubs and spokes approved by BPEC to deliver its new solar thermal and solar PV qualifications can use the BPEC materials to support the delivery of these BPEC qualifications only. Centres which deliver qualifications through other awarding organisations must use the materials developed by the National Skills Academy.

Strong growth in renewables Over the last five years BPEC has pioneered renewable training courses; take-up by colleges, training centres and installers continues to grow. Business development manager, Paul Cullen commented: “Renewable technology forms a very significant part of our business. Over 30% of the training manuals we sell are for renewable technologies, and in excess of 170 colleges and training centres are now approved to deliver such courses.” The company has recently approved its 350th training and assessment centre. www.bpec.org.uk

THE OIL & GAS HEATING SPARES SPECIALISTS From the 12th March ABGO will be located at our NEW purpose built DistribuƟon Centre. The only things to change are our phone numbers and address. You will sƟll get.

• Next day delivery naƟonwide to UK, Ireland & Europe • In stock a full range of top products from AGA-Rayburn to Riello • Friendly technical team on hand to help

We’re

moving

to Unit 4 Canal Side The D ell, En terpris e Driv e Four A s h e s Wolve rham on WV10 ptto 7DF

• Trade counter service available.

• CompeƟƟve prices & unbeatable service - Guaranteed

Call our NEW Hotline from 12th March!

01902 790900 01902 790909 Fax

The pressure of modern business life can cause the little everyday courtesies to be forgotten.

At ABGO, we would like you to know that we appreciate your business and thank you for giving us the opportunity of being of service.

www.abgo.co.uk Oil Installer Spring 2012 | 33

Products & Services

New catalogue, new products Anglo Nordic has a new catalogue for 2012 – over 70 new products have been added alongside the already extensive range. Plus an Anglo Selected line of quality, handpicked items at competitive prices.

In addition to providing a wide range of heating components, installation equipment, test equipment and oil lifters, the company is also a distributor for Dwyer.

Anglo Nordic offers free UK next day delivery on all orders over £350. Orders received by 3pm are dispatched the same day. Email sales@anglonordic.co.uk. See below.

Anglo Nordic – more products with next day delivery

An app for oil nozzle output EOGB has launched an oil nozzle output calculator app for android and iPhone. Based on Danfoss nozzles, the £2.99 app calculates burner and boiler outputs in kW based on pump pressure, nozzle size and boiler efficiency inputs.

An essential tool for the oil burner engineer, the calculator app is easy to use and covers kerosene (Class C2) and gas oil (Class D) to BS2869 and all Danfoss nozzles. “No more guesswork or manual calculations, this app will guide you to achieving the correct nozzle settings for oil burners,” says EOGB’s Stewart Binnie.

This nozzle output calculator – suitable for all makes of pressure jet oil burners that use Danfoss nozzles – is set up to give a guide to the outputs given from Danfoss nozzles at a given pump pressure. It is worth noting that different nozzle manufacturers use different reference pressures, so they may not give the same output as Danfoss. See also page 30. EOGB will be at Ecobuild on stand S3060. www.eogb.co.uk

T: +44 (0) 208 979 0988 F: +44 (0) 208 979 6961 www.anglonordic.co.uk sales@anglonordic.co.uk

Full Range Catalogue Available Quote ‘OIL 1’ Fluidics Nozzles

Fluidics Available from Anglo Nordic.

Oil Tank Dryer Absorbs Water

Reliable & cost effective alternative to other brands.

Removes up to 1.59L of water.

ANGLO NORDIC BURNER PRODUCTS LIMITED

34 | Oil Installer Spring 2012

Improving communication Kingspan Environmental’s SonicSignalman electronic oillevel monitoring system now has a new SMS feature, which will allow oil companies to send text messages to end-users.

The SonicSignalman is a onepart device that uses the latest ultrasonic and GSM technology to remotely monitor remotely the level of oil in a customer’s tank. The new facility will enable oil companies to send updates to customers about promotions and planned delivery runs.

Messages can be broadcast to all customers or sent to those in specific geographical locations.

The information received back can be used to improve logistics, reducing the number of wasted deliveries and spreading periods

of peak demand. See also page 15. www.sensor-systems.com

The new SMS text message service from Kingspan Environmental

Wise up to CO awareness Deaths in the UK from carbon monoxide (CO) poisoning have trebled in the last 12 months, according to a report by the Gas Safety Trust. But installers can play a key role in keeping families safe from the dangers. Last year, the deadly threat claimed 25 lives, while 4000 people were treated for the effects of low level CO poisoning.

Honeywell supplies Parts Center with a range of CO detectors, which start at just £23.50. Colin McGregor, Parts Center sales director, said: “The number of people killed or seriously affected by the

Sales director, Colin McGregor warns of the dangers of CO poisoning

effects of CO poisoning is simply unacceptable. And yet, CO detectors are simple to install and relatively inexpensive to buy.” Parts Center is running a campaign called Wise up to CO Awareness. See also page 2. www.partscenter.co.uk

Are you missing out?

The new OFTEC Direct Catalogue contains everything you need plus some unmissable offers.

Get your copy today, telephone

0845 65 85 080

A CAREFULLY SELECTED RANGE OF EQUIPMENT FOR HEATING PROFESSIONALS

3 SIMPLE WAYS TO ORDER YOUR COPY NOW: T: 0845 65 85 080 | E: sales@oftecdirect.com | www.oftecdirect.com Oil Installer Spring 2012 | 35

Products & Services

Intelligent oil monitoring

Kibosh burst pipes A Scottish plumber’s invention has been cleared for distribution in the UK. The Kibosh Emergency Pipe Repair, manufactured by Cademuir Toolmaking, is a plastic clamp invented

by Ross Dickinson, to stop cracked pipes from flooding homes. Ross explained: “Almost four years ago, I was at somebody’s house, which had been flooded by a burst pipe. It happens every winter. That’s when I had my eureka moment.” Kibosh has completed its BSI testing worldwide and is available from PlumbStore, Travis Perkins and Graham. www.kiboshpiperepair.com

The brand new iTank range from Harlequin Plastics not only monitors oil levels, but analyses both oil usage and spend. The technology comes in the form of the i-Track intelligent oil monitoring system, which calculates oil levels more than 200 times per day. The accurate monitoring technology means that customers can see exactly how many days fuel is left in their tanks.

Furthermore, iTank is one of the most secure tanks on the market, with iTank Pro models incorporating a Harlequin internal alarm lock, an external Spinsecure tank lock and a remote alarm system. See also page 9. www.harlequinplastics.co.uk

Find out how many days fuel is left in the tank with the new i-Track monitor from Harlequin

36 | Oil Installer Spring 2012

Burner partnership Ecoflam has supplied its MAX OIL burners to TR Engineering for its Trianco range of Contractor SE kitchen/ utility boilers. The burners, which are suitable for domestic and commercial applications, were The MAX OIL burner, specified by chosen for excellent TR Engineering performance, high efficiency and quiet operation. Available in outputs from 17kW to 546kW, the range of low NOx burners features an extremely efficient fan ventilation system – making them compatible with a wide variety of boilers with high combustion chamber pressures. Additional features include an air damper with progressive micrometric air regulation, easy to assemble combustion head and monoblock electrodes for simple nozzle installation after maintenance. www.ecoflam-burners.com

Smart solutions at Dunraven Dunraven Systems, suppliers of Apollo tank monitoring and telemetry systems, reports a great response to the world’s first heating oil energy monitor – Apollo Smart. “Apollo Smart allows consumers to monitor fuel levels, heating costs, CO2 emissions and even calculates days supply remaining. Ideal for new and existing heating oil installations, Apollo Smart adds value and profit opportunities for technicians too.” says Dunraven’s managing director, Gerry Jones.

See also page 21. www.dunravensystems.com

Monitor fuel, heating costs, CO2 emissions and days supply remaining with Apollo Smart

Oil Installer Spring 2012 | 37

Products & Services

A glassy new brochure

In control Afriso Eurogauge’s 3/K-1 Flow-Control oil deaerator for single-line systems with return line is suitable for use with fuel oil, diesel, biofuel and biodiesel.

The amount of oil drawn from the tank corresponds exactly to the oil burnt, whilst the flow control removes the danger of an oil leak going unnoticed in the return line. www.eurogage.co.uk

The Heated Glass Group has launched its latest product brochure. The new brochure contains details on the company’s UK manufactured heated glass, privacy glass and its extensive portfolio of glass radiators. www.theheatedglassgroup.co.uk

More flow control from Afriso

Boilers available in Standard Efficiency and also Condensing

SPECIALIST OIL HEATING MERCHANT Dobies Heat Centres have been supplying to the Oil Installer and Service Engineers market since 1982 providing a knowledgeable, reliable and trustworthy service.

We supply a full range of top products, from Oil Boilers to all spares. Our Spares Department carry an extensive stock ranging from fast moving products to the more obscure items.

Our website was designed exclusively for trade customers in mind with fast efficient ordering. All you need is your account log in and you can get up to the minute pricing, special offers and check all your current invoices and statements in real me.

Its all you need to keep you connected 24/7.

www.dobiesheatcentres.co.uk 35 Drumshoreland Road Pumpherston Livingston West Lothian EH53 0LF Tel 01506 430094 38 | Oil Installer Spring 2012

35K Harbour Road, Longman Ind Estate Inverness IV1 1UA Tel: 01463 711188

Ordering made easy Hytek has a brand new website to make purchasing items online, quick and easy. Once an online account has been created, the companyâ&#x20AC;&#x2122;s entire catalogue of products is available for browsing.

The products are split down into industry categories, which can then be ďŹ ltered by manufacturer.

With the product code, items can be added straight into the basket. Orders can also be saved to make return visits even quicker. With an improved search facility, Hytek is conďŹ dent that its customers will always ďŹ nd what they need, including technical and sales literature. www.hytekgb.com

%$ The new Hytek website with improved search facility

Happy 35th anniversary Carbery Plastics celebrates its 35th anniversary this year. The Clonakilty, Co. Cork based company specialises in the manufacture and supply of storage tanks to customers across the UK, Ireland and a growing number of mainland EU countries. â&#x20AC;&#x153;This signiďŹ cant milestone is a testimony to the commitment of our employees, the quality of our product range and most importantly, the loyalty of our customersâ&#x20AC;? says Mark Oâ&#x20AC;&#x2122;Connell, head of UK sales. www.carberyplastics.ie

% $ ) !$% #*$ "

!

!

& &*% & $ %#" ( ) & % " % $ & "%& $*% # "!( %#&%%"! !"' "!

*

'" ! " "

Mark Oâ&#x20AC;&#x2122;Connell, head of UK sales, praises the commitment of Carberyâ&#x20AC;&#x2122;s staff and the loyalty of customers

'" $& "

'" $& "

'" $& "

% $ ! $

% %@ & %& " % # ' ((( & %& " % # '

Oil Installer Spring 2012 | 39

Energy Efficiency and the Green Deal

Golden days

Weak links in Green Deal?

Worcester has created a special 50th anniversary website.

Counting down to 14th September – 50 years to the day since the company was formed - visitors to the www.50yearsofwarmth.co.uk will find competitions and a listing of special events to celebrate the company’s golden year.

The website also looks at the company’s journey from an old vinegar factory in Worcester to its position as a market leader in energy-efficient heating systems.

Worcester, Bosch Group has warned the government that commission-based assessors might be tempted to mis-sell Green Deal finance packages; particularly in the case of those assessors with ties to retailers. The warning was made in response to the Green Deal consultation which closed on 18th January.

Neil Schofield, head of government and external affairs says the potential for misselling is a real concern across the industry.

“We don’t want to be in a situation where homeowners are taking out finance packages expecting a £50 monthly reduction in heating bills to cover their loan, but are ultimately only saving £30, leaving them £20 out of pocket.”

Assessor independence is critical “Unless the customer pays the full cost of the assessment upfront there will always be the risk that organisations will subsidise the assessment cost in order to influence the assessment,” adds Mr Schofield. “In this area the credibility of the Green Deal is potentially

Worcester’s dedicated Twitter feed heatingyourhome - will also provide regular updates throughout the course of the anniversary year.

The NEW KBB valve from Teddington, the best just got better...

The KBB from Teddington Appliance Controls is already recognised as the market leader in Fire Valves in the UK. It’s just got even better! Now it can handle almost any type heating oil – from Kerosene through B30, right up to B50.

6 6 6 6 6

OFTEC Approved Fully Tested Protecting Homes for Over 40 Years Sensor Length up to 20m 3 year Warranty

With the drive to offer renewable solutions to the Oil Heating Industry and the imminent inclusion of Bio-fuels in the RHI, now is the ideal time to order replacement KBB Fire Valves. Remember that you can also get the Teddington OFV, parenthesis (Oil Filter Valve) a stop valve with built-in filter and the KBT1000 our universal Oil Valve Test Box from your local plumbers merchant.

Teddington Appliance Controls Ltd. Holmbush, St Austell, Cornwall PL25 3HG Tel: 01726 222 505 E-mail: Tacsales@tedcon.com

www.tedcon.com

Available from all good plumbers Merchants including:

Graham

40 | Oil Installer Spring 2012

at stake.

“We’re already hearing anecdotal evidence of homeowners being advised to install cavity wall insulation on unsuitable properties. Our view is that government needs to concentrate on regulating the quality of the assessment work. A standard assessment will be satisfactory in most cases but it is critical that the assessor is able to access specialist technical support if it is required.”

Installers could be ‘marginalised’ “If the Green Deal is just about the big six utilities and the big high street retailers then the installer will be marginalised from the process. Homeowners still go to their installer for advice on heating their home, not utility companies, not heating manufacturers and certainly not retailers. If this is going to work then we need installers to be championing the Green Deal not relegated to the sidelines.”

What is your opinion on how the Green Deal relates to installers?

Email jane@oilinstaller.co.uk

Renewables

Installers’ DVD champions renewables

Activair with MCS Now MCS accredited, Trianco’s Activair air source heat pumps are eligible for the Renewable Heat Premium Payment and the Renewable Heat Incentive expected in October.

The range is compact and unobtrusive, yet offers low energy costs and high CO2 emission savings. With flexible siting options, Activair is available in nominal maximum outputs from 3kW up to 18kW. All models come complete with digital programmer and carry a 3-year warranty. www.trianco.co.uk

Hands-on installers Watson and Andy share their experiences with other installers

Heating and plumbing engineers, Andy Buchan and Watson Carlill, have released a renewables DVD aimed at installers. The pair who have a combined 80 years in the industry, recently formed Future Renewable Energy (FRE).

Now running seminars nationwide to encourage a greater uptake of renewables, the DVD was produced in partnership with the Worcester Bosch Group. The DVD, which outlines the nine key renewable technologies available in the UK, is split into chapters allowing installers to access information quickly and easily.

Martyn Bridges, director of marketing and technical support at Worcester Bosch Group added: “Whilst manufacturers such as ourselves offer an extensive range of training courses, it’s great news for the industry that two installers are playing their part in encouraging greater uptake of renewable technologies. The DVD offers a great insight into the technologies available and is a must for any installer keen to make the transition from domestic boiler installations to fitting renewable technologies.” www.futurerenewableenergy.co.uk

Trianco at Ecobuild

Trianco’s Newton range will be on show at Ecobuild

Trianco’s new portfolio of renewable products will be showcased at Ecobuild. (For more news on Ecobuild see page 8).

The Greenflame biomass wood pellet boiler range offers carbon neutral heating and DHW with an efficiency in excess of 90%. The 15kW model is the first addition to the range. Also new is the Newton range of multifuel and Defra approved wood-burning stoves, available in 5kW and 8kW models, and with/without fuel store pedestal. The Aztec electric system boiler is due to be launched in April. A compact unit houses pump, auto air vent, expansion vessel and pressure gauge with no need for unnecessary external plumbing or pipework. www.trianco.co.uk

The Activair range comes with a 3-year warranty

Biomass power A new waste wood power plant is to be built in Yorkshire.

The 53MW power station at the former RAF airfield at Pollington, will be fuelled by 360,000 tonnes of waste wood per annum and power around 55,000 homes per year.

Feedstock will be delivered to the site via the Aire and Calder navigation canal.

RWE npower started commercial operations at Britain’s biggest biomass power station at Tilbury in Essex at the end of January, when the third of three units at the 750-megawatt power plant started producing power.

Oil Installer Spring 2012 | 41

Renewables

Heating commercial buildings A short animated ďŹ lm highlights how easy it can be for commercial buildings to achieve renewable energy targets with Mitsubishi Electricâ&#x20AC;&#x2122;s range of heat pump water heating systems. The fourminute animation focuses on a modern school building and shows how air and water source heat pump systems can be incorporated into a building to work alongside, or replace, traditional heating systems. www.youtube.com/watch?v=KuPVoMolzxo

Mitsubishiâ&#x20AC;&#x2122;s headquarters showcase solar

Highlighting solar beneďŹ ts Mitsubishi Electric is using the roof of its three-storey headquarters in HatďŹ eld to lower its carbon footprint by generating electricity. The roof will also earn income from the Feed in Tariff.

The latest hi-efďŹ ciency monocrystalline PV modules â&#x20AC;&#x201C; MLT255HC â&#x20AC;&#x201C; with a net install capacity of 49.4kW have been installed. These are expected to deliver over 42,000 kWh per year with a CO2 saving of over 22 metric tons. The two roof sections are typical ďŹ&#x201A;at roofs with a waterproof membrane covering. To avoid penetrating the membrane, the company has used a ballasted A-frame system, designed and supplied by Big Foot Systems. www.mitsubishielectric.co.uk

Calls to back micro-CHP heeded Companies in the micro-CHP (combined heat and power) sector have called for government support. The industry is convinced that the installation of over one million micro-CHP units in the UK by 2020 is â&#x20AC;&#x2DC;an achievable and credible aspirationâ&#x20AC;&#x2122;, but that the right government support will be key to making this happen. A report sets out a road-map demonstrating how micro-CHP could replace condensing boilers in the home heating market. The campaign seeks to raise the Feed-in Tariff for micro-CHP to at least 15p/kWh with commitment for continued support after an initial pilot of 30,000 units. www.jdsassociates.com In early February, Graham Meeks, director of the Combined Heat and Power Association said: â&#x20AC;&#x153;Greg Barkerâ&#x20AC;&#x2122;s commitment to increase the tariff level for micro-CHP is a welcome and important step forward in realising the enormous possibilities of this exciting technology.â&#x20AC;?

Mayweld Tanks - Security in Steel.

Visit Mayweld Bespoke at

www.mayweld.co.uk/bespoke or call 01384 560 285

s 9ES TO YOUR DESIGN ONLINE s 9ES TO YOUR SPECIlCATION s 9ES TO YOUR SITE REQUIREMENT 42 | Oil Installer Spring 2012

Banners Lane, Halesowen, West Midlands B63 2SD E: sales@mayweld.co.uk W. www.mayweld.co.uk

New technical manager Wagner Solar UK has appointed Jan Stasik as UK technical manager. Jan will be responsible for managing the solar PV and solar thermal technical division, whilst also leading the training programme at the companyâ&#x20AC;&#x2122;s award winning Wagner Academy solar training school.

Jan is a veteran of the solar industry and a long-standing Wagner employee, having joined the UK team from the parent company Wagner & Co, where he was attached to the

Solar PV installations helping to get the unemployed back to work

international departmentâ&#x20AC;&#x2122;s technical team. www.wagner-solaruk.com

Jan Stasik looking after technical and training matters at Wagner Solar UK

The fall and rise of FiT Following the governmentâ&#x20AC;&#x2122;s subsidy cut, solar electricity installations fell by two-thirds in the last week of December compared to the same period in 2010.

According to data from the Microgeneration CertiďŹ cation Scheme, just 35 installations were completed that week compared with 103 in 2010. The data also shows that on 12th December â&#x20AC;&#x201C; immediately after installations ceased to be eligible for the higher tariff â&#x20AC;&#x201C; the number of installations week-on-week dropped 97%. In the week ending 11th December, 9892 installations were completed as people rushed to beneďŹ t from the higher tariff.

Speaking immediately after the cuts, Howard Johns, chair of the Solar Trade Association, said: â&#x20AC;&#x153;I imagine a lot of solar companies will close if there isnâ&#x20AC;&#x2122;t a resolution on the Feed-in Tariff.â&#x20AC;?

The industry has since challenged governmentâ&#x20AC;&#x2122;s plans and the government has lost its appeal at the High Court. Presently, all installations between 12th December 2011 and 3rd March should qualify for the higher 43.3p tariff rate; installations after that point should stand at the 21p tariff.

Solar powers brighter future More than 50 unemployed people are building sustainable careers on a construction site in North Tyneside, thanks to training from Gateshead College and Group Horizon. After securing employment through building services company, Optimal Systems, the new recruits will work on social housing stock.

Group Horizon and Gateshead College work with Job Centre Plus and welfare-to-work organisations, such as Ingeus, to identify candidates for the unemployed training programme. Trainees are then taught the skills which the employers require including solar PV installation, construction, engineering, security, IT and administration.

" # ! " ! # " % ! " ! " !" " # #!" " !

#"

" # $$$ "!# ! " # !" "

Oil Installer Spring 2012 | 43

Manufacturing at ET Solar

From silicon to solar panel The manufacture of a solar panel is a fascinating and thorough process which in the case of ET Solar involves over 200 stages of development and checks

1

Oil Installer was invited to see ET Solar’s manufacturing process at first hand through ingot, wafer and cell to finished module at the company’s Taizhou manufacturing plant in China.

Modules are produced for commercial, residential and utility scaled applications with projected capacity for 2012 year end being 800MW wafer, 1000MW cells and 1600MW of modules.

The company’s solar panels feature integrated bypass diodes to protect the solar cell circuit from hot spots during partial shadowing. Their anodised aluminium frames with hexagon drainage holes have strong load resistance with grounding holes on four sides.

Modules are finished in a highly transparent, low-iron and tempered glass with antireflective coating.

A selection of the process stages are illustrated on these pages.

2

4

3

5

(1) The silicon which is sourced from Korea is heated to a melting point of 1420ºC using American equipment.

(2) This solid block of melted silicon can produce 12,000 wafers. The block is first made into 25 smaller blocks or ingots using a Swiss slicing machine.

(3) Each ingot is infra red scanned in a laboratory to check for impurities.

(4) The provenance of each ingot can be tracked via its unique code.

(5) The ingot undergoes a series of processes to smooth edges until a glass like finish is achieved.

44 | Oil Installer Spring 2012

6

7

8

9

10

(6) Once the ingots have been sliced into wafers. Each wafer is put through three washing processes to remove any further impurities.

11

(7) Each individual wafer is then checked by hand before undergoing the soldering process…

(8)…which can be either fully automated or undertaken as a manual operation.

(9) The module is assembled and laminated before being (10) fitted into its rigid frame.

(11) Each completed module is checked at a testing station before…

(12) … being packaged and sent to customers across the world.

12 Wagner Solar (page 43) is one of the UK distributors of ET Solar products.

Oil Installer Spring 2012 | 45

Gallery

Installation horrors This picture of a very poor tank installation was sent into OFTEC recently. Several obvious problems with the installation have been highlighted by the technical department. Email jane@ oilinstaller.co.uk if you spot any more!

The tank Located within 1.8 metres of an opening Base not fully supported causing the tank to deform The oil supply Fusible head fire valve used instead of the remote acting type Fire valve located within 1 meter of the boiler casing The boiler system Casing heavily corroded due to insufficient weather protection Lack of dedicated ventilation Flow and return pipework not insulated Pressure relief valve located in a position where water/steam could discharge over a technician It is important to ensure that all tank installations comply with the relevant building regulations.

Comprehensive guidance on tank installation is available in the OFTEC technical books. Whilst installers know that poor tank installations can be dangerous, some householders may need more convincing – hand them the facts by downloading the easy guide to oil storage at www.oftec.org.

Oil Installer welcomes more installation horrors – email your photographs to jane@oilinstaller.co.uk.

And particularly looks forward to receiving the photograph of a pig living in an upturned tank!

A tank on tap

A beached tank?

“I saw this today and thought of Oil Installer,” wrote Jim Standen “Then blow me down if my Oil Installer magazine wasn’t on my doorstep when I returned home!

“Fancy fitting a garden tap to an oil tank. What on earth was the thinking behind it? Water the garden with this and you’ll kill all your plants!”

Not the safest tank in the world – this shot was taken by an Oil Installer reader on Beer beach in Devon.

46 | Oil Installer Spring 2012

& #! $ ) !# ! ) !" " !

* #(* "$! $ * ) *# " "$! ) ! "" * #( "$! * *) * ""* % !

! *% * "$! & # *$ *# * ) ! # " % * ! * * "$! !"

!" * #* ""* "$! $ ! # *# * #*( $! ' "# * $ # * ')

$ * ! * * ""$! # * # # % * % ! % * !*$ *# (

)

) ) # * " $""*( $!*! $ ! #"* !*% " # %%% " !# ! $ ! # !* # * % !

* "$! * !% "* "* *#! * * * ! * ! #* "$! * !% "

# * $# ! " * *! $ # * (*# * * !% "* $# ! #(

Solving the puzzle of tomorrowâ&#x20AC;&#x2122;s energy needs Manchester Central Convention Complex 17th & 18th October 2012 For all enquiries regarding exhibiting or marketing opportunities surrounding the event,

please call the events sales team 01565 653 283

www.oilandrenewableenergyshow.co.uk Sponsors: