Oco biomedical system benefits

p | (800) 228-0477 e | info@ocobiomedical.com w | www.ocobiomedical.com

SYSTEM BENEFITS

|02

THE NEXT GENERATION IN DENTAL IMPLANTS

Current dental implant designs are either tapered and pressure threaded into the osteotomy (which can lead to pressure necrosis if over torqued), or are parallel walled implants that feature a passive placement into the prepared osteotomy.

OCO Biomedical’s Dual Stabilization® dental implants are the Next Generation in Dental Implants. Our implant’s unique body design coupled with a minimally invasive placement procedure creates tension (not pressure) on the bone at placement. OCO Biomedical implants offer exceptionally high implant stability at placement which is a critical success factor during the early healing process of osseointegration.

A History of Innovation OCO Biomedical has been creating cutting edge products for over 30 years. Since we patented the O-Ball over-denture attachment system in 1980 we have been an integral part of the dental implant community. Over the years we have continually developed new implant systems and have refined our placement protocol to be a simple and reliable technique for any dentist. Our innovative nature continues with newer patent-pending features like the Bull Nose Auger™ tip.

The future has just begun. Our slogan says it all; we really are The Next Generation in Dental Implants.

03|

DUAL STABILIZATION® With the innovative Dual Stabilization® combination of our patent-pending Bull Nose Auger™ tip, Mini Cortic-O Thread™ and Machined Divergent Platform, OCO Biomedical implants fixate into the bone providing high initial stability and allow for Selective Loading options.

Bull Nose Auger™ tip The patent pending Bull Nose Auger™ tip condenses and mechanically locks into the bone by pulling bone up around the apex, creating tension between the tip and divergent platform, promoting an influx of bone growth elements around the implant body.

Mini Cortic-O Thread™ Stability at the top of the implant is enhanced by the Mini Cortic-O Thread™ that locks into the crestal bone, preserving the bone.

Embedded Tapered Platform™ The Embedded Tapered Platform™ provides an anchor point for the Bull Nose Auger™ tip to pull against while also providing a tissue/implant seal with the surrounding gingiva. All OCO Biomedical Implant platforms have a 32xx machined surface and are not polished. This allows for variable positioning of the implant to solve conditions of bone irregularities.

|04

IMPLANT FEATURES ISI

One Piece available in O-Ball & Crown & Bridge

Titanium Nitride Coated Top The superior portion of the implant and many of our abutments are titanium nitride treated resulting in a gold appearance for increased esthetics upon restoration.

Internal Connection Comprehensive Product Offering

The TSI, ERI & Macro™ two-stage implants have an

OCO Biomedical offers a comprehensive array of

internal 8° Morse Taper connection which guides the

implants designed and manufactured to give doctors

abutment into the implant and creates a cold weld

superior performance and profitability. The OCO im-

lock with non-indexed stock titanium abutments,

plant range includes small diameter implants for thin

eliminating any potential lateral movement. Splines

ridge applications, larger diameter one piece implants

are also integrated within the internal connection for

available in Crown & Bridge and O-Ball prosthetic

multiple indexing options with two-piece abutments.

heads, and two-stage implants available with multiple prosthetic abutment options for fixed and removable prosthesis. We also proudly distribute Aseptico drilling units and surgical handpieces.

YOU DECIDE...

WE PROVIDE

05|

Self-Tapping Body Design

Logical Progression

The Dual Stabilization implant body creates a tapping

One Body; Infinite Placement Possibilities – Our im-

pattern in bone when threaded for an enhanced me-

plant design employs one implant body design to pre-

chanical lock in the surrounding bone. The Bull Nose

dictably work in all areas of the mouth. With the OCO

Auger tip will not proceed any deeper than the initial

Biomedical System, it is easy to progress from our

pilot drill and will lock into the base of the osteotomy.

3.0mm I-Mini® implants to 5.0mm ERI implants using

®

™

the same simple, reliable placement protocol. Clinicians can choose either a one or two stage design for Grit Blasted Surface

case specific indications.

The proprietary OCO Surface Treatment greatly increases implant surface porosity and increases overall surface area for optimal bone growth and stability.

However, the patent-pending Bull Nose Auger™ tip is left with a machined finish to preserve apical purchase and enhance the tip’s capacity to pull bone up and around the threads.

I-MICRO

I-MINI®

ISI

TSI

ERI

|06

PLACEMENT & PROTOCOL FEATURES

Selective Loading and High Torque Capability All Dual Stabilization® one-piece and two-stage implants are capable of being immediately loaded if the torque reads greater than 35 Ncm in the maxilla and 40 Ncm in the mandible. Obtaining greater than 40 Ncm of torque at placement is not unusual; in fact, we encourage the high torque reading for superior implant stability at the time of placement. This allows for “selective loading” options: Immediate loading or delayed loading at any preferred time after placement.

Warning: Do not relieve the implant of torque (back off) if the Ncm torque reading is greater than 40 Ncm or the unique feature of the Dual Stabilization® implant will be lost!

Minimally Invasive Surgery For a minimally invasive, flapless surgery, a tissue punch is needed to access the bone non-invasively.

Instead of using a manual tissue punch, the OCO Biomedical system employs a rotary tissue punch with a removable guide pin. The guide pin follows the initial pilot hole to ensure a perfect radius to fit the Embedded Tapered Platform™ of the implant.

07| Drill Stops Drill stops prevent the pilot drill from exceeding the desired depth. After using the tissue punch and countersink drill (if needed) or if a flap is reflected, engage the pilot drill with the drill stop that corresponds with the implant length (available in 8, 10, 12, and 14mm lengths) and drill to bone level.

Countersink Drill A crown and bridge abutment is broached into the countersink drill so that you can place the platform of the implant at the desired level. If the surgical dentist requires the interface to be closer to bone level, the countersink is pressed downward into the bone and the downward cutting drill will allow the platform of the implant to be submerged at placement. The countersink drill also modifies the bone in areas with irregular bone heights.

Osteotomy Formers Instead of using multiple downward cutting twist drills to prepare an osteotomy, the OCO Biomedical Implant System employs an irrigated tri-flute, side cutting “Osteotomy Former” to shape the osteotomy. This enables the implant to have maximized bone to thread fixation at placement. The Osteotomy Former is a non end-cutting and will drill no deeper than the pilot hole. an internal 8° Morse Taper connection which guides the abutment into the implant and creates a cold weld lock with non-indexed stock titanium abutments, eliminating any potential lateral movement. Splines are also integrated within the internal connection for multiple indexing options with the two-piece abutments.

Ultem® Delivery Cap The Ultem® Delivery Cap enables the doctor to remove the implant from the vial and take it directly to the osteotomy. This improves tactility and helps preserve sterility when initializing implant placement.

After a few threads engage the bone, the delivery cap is disengaged by relieving it slightly counterclockwise and pulling straight off. The implant may also be placed with a handpiece if the doctor prefers. * Ultem® is a registered trademark of SABIC Innovative Plastics™

|08

SURGICAL KITS

COMPLETE SURGICAL KIT

MICRO MINI® SURGICAL KIT

MACRO™ SURGICAL KIT

Organized with the OCO Bio-

The Micro Mini Surgical Instru-

The Macro™ Surgical Instrumen-

medical color-code system, this

mentation System is an eco-

tation System is an economical

kit coincides with the implant

nomical surgical kit designed

surgical kit designed specifically

placement procedures in an easy

specifically for our 2.2 and 2.5mm

for our 6.0mm Macro™ Dental

to follow, step-by-step format. All

I-Micro and the 3.0mm I-Mini®

Implants. The kit includes all the

components are labeled for easy

Dental Implants. The kit includes

instrumentation you need to

removal and return to the tray

all the instrumentation you need

place this unique large two-piece

after each surgery.

to place our unique one-piece mini

implant.

implants.

The kit’s size and low profile al-

Labeled for easy removal and

lows it to fit easily into the auto-

Components are labeled for easy

return to the tray following sur-

clave for sterilization. Tray includes

access and return to the tray

geries, the Macro™ kit’s size and

a compartment underneath the

following surgeries. The kit’s

low profile easily allows autoclav-

caddy providing room for addition-

size and low profile easily allows

ing. Tray includes a compartment

al components and instruments.

autoclaving. Tray includes a com-

underneath the caddy providing

Also includes laminated schematic

partment underneath the caddy

room for additional components

for easy reorganization following

providing room for additional com-

and instruments.

autoclaving.

ponents and instruments.

09|

MINI IMPLANTS OCO Biomedical’s mini implant offerings include the innovative 2.2 & 2.5mm I-Micro and the 3.0mm I-Mini®. The I-Micro is a precision machined mini implant with an aggressive thread for initial stability and is engineered to be compatible with Imtec® and Intra-lock® mini implant instrumentation.

Take advantage of more available bone by using our slightly larger 3.0mm I-Mini implant with OCO’s patent pending Bull Nose Auger™ tip which is designed to stimulate bone growth. The I-Mini® has had a success rate of over 99% for almost a decade.

I-MICRO

I-MINI®

RESTORATIVE OPTIONS Restorative Instrumentation Kit An economical kit that contains all the instrumentation needed to restore our entire line of two-stage dental implants; including the TSI, ERI and the all new 6.0mm Macro™. The kit also contains Profiling Burs for removal of excess bone around implant margins and a 30 Ncm Torque Wrench.

Direct Impression Options Tissue Retraction Impression Pickups (TRIPS), Analogs, and Acrylic Copings are used for simple abutment level direct impression techniques where the patient goes home with the final abutment and a temporary crown.

Indirect Impression Options Impression copings and Analogs are available for open or closed tray Implant level impressions for the indirect technique and are sent to the dental laboratory. *Imtec is a registered trademark of 3M ESPE

Direct

Indirect

*Intra-lock is a registered trademark of Intra-Lock International

|10

ABUTMENT OPTIONS SOLID C&B ABUTMENTS

One-piece Crown & Bridge abutments designed with

PEDESTAL ABUTMENTS

Anti-rotational abutment (available in straight and 15°

the dependable & stable morse taper connection. Solid Abutments are available in 4.0, 5.5, and 7.0mm heights.

angled) that allows the crown to be created to the implant’s margin.

Anti-rotational abutment (straight & 15° angled) covers

SHIELDED ABUTMENTS

the implant’s margin, allowing the dental lab or Dentist to greatly prep the abutment and create an alternate crown margin. The straight shielded abutments come with an O-Ball impression screw for impression pickup.

NATURAL CONTOUR ABUTMENTS

Anti-rotational Scalloped Abutment with a lower facial margin and higher lingual margin used to seat the crown to the patient’s gingival contour. The Natural Contour Abutment is also packaged with an O-Ball impression screw for impression pickup.

Locator abutments offer excellent overdenture stability

LOCATOR ABUTMENTS

when combined with OCO Biomedical two-stage implants. Features include a unique pivotal denture cap, low vertical height and excellent performance with non-parallel implants. Available for 3.25, 4.0, and 5.0mm implants.

Offering unmatched fixation strength and stability, the

O-BALL ABUTMENTS

O-Ball abutment is the most widely used denture attachment system in the world. Patented by OCO Biomedical’s founder, Dr. David D’Alise in 1976, the O-Ball system has helped millions of patients have more stable dentures.

11|

CUSTOMER CARE Customer Support OCO Biomedical wishes to become an integral part of your practice. Whether it’s a question about case planning or some guidance with a restoration, our professional and knowledgeable staff can quickly get you the answers you need. When you call OCO Biomedical rest assured that you will speak to a knowledgeable representative based in the United States.

Education and Training OCO Biomedical offers an array of training courses to meet the individual needs of our customers. For more information visit www.ocobiomedical.com/courses or call (800) 228-0477.

Made in the USA OCO Biomedical implants and prosthetic components are American made in Albuquerque, NM to the very highest tolerances and specifications for consistent quality. We also attempt to source as many of our associated products from US distributors and manufacturers as possible.

Implant Warranty OCO Biomedical Dental Implants are conditionally warranted if failure occurs within 5 years after placement, and will be replaced at one third the current retail price, plus shipping, provided that: the implant was used with an OCO Biomedical abutment and the implant and abutment are returned with a completed Implant Return Form.

“I’ve been restoring implants for the past eighteen years and thought I would never be able place the implants on my own. One of your representatives assisted me prior to placing my first implants and was very knowledgeable and patient.Thanks to OCO Biomedical I now have the knowledge and courage to provide more aspects of dental care for my patients. I will definitely refer my colleagues to your company.”

Antoine Bochi, D.M.D. P.C.

|12

CONTACT OCO BIOMEDICAL Phone

International Sales &

(800) 228-0477 | Toll Free

Business Development Manager

(505) 293-0025 | Direct

Matthew Baron

(505) 293-0447 | Fax

(800) 228-0477 EXT 227 | Toll Free (505) 480-2021

Address

| Mobile

matt@ocobiomedical.com

8500 Washington Street NE Suite A-1 National Sales Manager

Albuquerque, NM 87113

Christopher Sanchez Hours

(800) 228-0477 EXT 230 | Toll Free

7:00 am - 6:00pm MST

(505) 480-6157

Monday - Friday

chris@ocobiomedical.com

Website

Western US Inside Sales Representative

Visit www.ocobiomedical.com for case examples,

Tyler Ong

course information, in-depth product data and

(800) 228-0477 EXT 231 | Toll Free

much more.

tyler@ocobiomedical.com

Online Store

Eastern US Inside Sales Representative

Visit store.ocobiomedical.com 24 hours a day

Annamarie Pino

to order from our complete offering of products

(800) 228-0477 EXT 233 | Toll Free

quickly, easily and securely

annamarie@ocobiomedical.com

International Distributors

Oklahoma & Dallas Area

Visit www.ocobiomedical.com/resources/distribu-

Technical Sales Representative

tors for distributor information.

Kathy Bryant

| Mobile

(580) 504-1808 | Direct kathy@ocobiomedical.com Illinois, Michigan & Wisconsin Technical Sales Representative Jennifer Plocinski (630)488-7143 | Direct jennifer@ocobiomedical.com

*US Patents Pending Copyright Š 2011 OCO Biomedical Inc. 317-1 9-16-11