Commercial Transport Spares, Dec/Jan

DEC-JAN 2019/20

we think transport BPW HUB MAINTENANCE Best Practice is when you keep specification’s and settings “as new” by using the same grease as the assembly plant, this insures the torque settings used within the Hub assembly are working with known values and will provide you the correct outcome.

BPW’s “ECO-Li Plus” Semi-synthetic grease is designed to provide the correct amount of lubrication to be released over years of service and will provide you the best results.

$17.50 Part no. B0210404500 400g Cartridge

$199.50 Part no. B0210404700

ten4 DEAL ten C a rtridg es for

$15 .00 eac h

$75.00 Part no. B0256647400 Common Hub seal 2004-2017

in a 5kg pail

TRUCK, BUS AND TRAILER PARTS SPECIALISTS CHRISTCHURCH 129 Waterloo Road, Hornby, Christchurch 8042 t. 03 349 9202 e. sales@ctsltd.co.nz DUNEDIN 86 Otaki Street, South Dunedin, Dunedin 9012 t. 03 260 8000 e. sales.dn@ctsltd.co.nz AUCKLAND 10 Echelon Place, East Tamaki, Auckland 2013 t. 09 950 2650 e. sales.ak@ctsltd.co.nz TOLL FREE 0800 CTS LTD www.ctsltd.co.nz

WORKSHOP

WORKSHOP SERVICE GUIDE SERVICE GUIDE

HUB HUB

ECOand andECO ECOMaxx Maxx Hub System ECO Hub System Latest every 2 years or maximum every 300,000 km. .

Latest every years or maximum every km.

Clean taper2roller bearings and seals (using e.g.300,000 Diesel . oil) thoroughly. Dry and check for re-useability. Replace grease seal.

Clean Work taper roller and seals (using(ECO e.g. Diesel oil)thoroughly thoroughly.into Drythe andcavities check for re-useability.

Replace seal.in both BPW bearings special longlife grease Li-Plus) between taper rollers andgrease the cage

the taper roller bearings.

Work BPW special longlife grease (ECO Li-Plus) thoroughly into the cavities between taper rollers and the cage in both the taper rollergrease bearings.

Smear into the hub's outer bearing race. Smear the lip of the new seal all round with BPW special longlife grease Li-Plus.

SmearECO grease into the hub's outer bearing race. Smear the lip of the new seal all round with BPW special longlife grease ECO Li-Plus.

Clean the bearing journals of the axle stub (metal must be bright and dry). Smear with ECO Li-Plus grease.

Clean Fit thethe bearing journals of the axle stub nut (metal must be bright and dry).

Smear with ECO Li-Plus grease. wheel hub, tighten the axle using a torque wrench to 150 Nm whilst simultaneously turning the wheel hub and turn

a maximum 15° nut to the next possible locking hole.

Fit theback wheelbyhub, tighten theofaxle using a torque wrench to 150 Nm whilst simultaneously turning the wheel hub and turn back by a maximum of 15° to the next possible locking hole.

The next locking hole is reached by turning back the asymmetrical axle nut by a maximum of 15°. Fit pin with a snap hook.

The next locking reached byNm. turning back the asymmetrical axle nut by a maximum of 15°. Fit pin with a snap hook.

Tighten thehole hubiscap to 800 Tighten the hub cap to 800 Nm.

ECOPlusHub HubSystem System ECOPlus Every 2 years in off-road or every years in on-road use. Maximum 500,000km.

Every 2 years in off-road use oruse every 3 years3 in on-road use. Maximum 500,000km. taperbearings roller bearings (using e.g.oil) Diesel oil) thoroughly.

Dry and check for re-useability.

Replace Clean Clean taper roller (using e.g.

Diesel thoroughly.

Dry and check for re-useability.

Replace grease seal.grease seal.

Recommendation: the taper roller bearings afterin5on-road years inuse on-road use3and after 3 yearsuse. in off-road use.

Recommendation: Renew Renew the taper roller bearings after 5 years and after years in off-road Workspecial BPW special greaseLi-Plus) (ECO into Li-Plus) into thebetween cavities taper between taper and in taper both of the taper Work BPW longlife longlife grease (ECO the cavities rollers androllers the cage in the bothcage of the roller bearings. roller bearings.

SmearSmear greasegrease into theinto hub's bearing race. Smear lip of the round BPW special longlife grease theouter hub's outer bearing race.the Smear the new lip ofseal the all new sealwith all round with BPW special longlife grease - ECO-Li-Plus.

ECO Li-Plus.

Fit theFit wheel tighten the axlethe nutaxle whilst at whilst the same time turning the wheel the hubwheel until the axle nutthe torque the hub, wheel hub, tighten nut at the same time turning hub until axlelimiter nut torque limiter operates (clicks (clicks twice). twice).

DO NOT USE ANUSE IMPACT DRIVER.DRIVER. Fit the retaining in the groove between thebetween axle stubthe and operates DO NOT AN IMPACT Fit thekey retaining key in the groove axle stub and the nut.

DO NOT RESET THE AXLE NUT. the nut. DO NOT RESET THE AXLE NUT. For production date April 2000 onwards, insert theinsert hooked ring behind thebehind edge ofthe theedge axle of nutthe or (up March 2000) For production date April 2000 onwards, thespring hooked spring ring axletonut or (up to March 2000) into the thread on the axle stub. the hub to tighten 800 Nm. into the thread on the axleScrew stub. on Screw on cap the and hub tighten cap and to 800 Nm.

ECOPlus ECOPlus22Hub HubSystem System Every 2 years in off-road use or every 3 years in on-road use. Maximum 500,000km.

Every 2 years in off-road use or every 3 years in on-road use. Maximum 500,000km.

Clean taper roller bearings (using e.g. Diesel oil) thoroughly. Dry and check for re-useability. Replace grease seal.

Recommendation: Renew the taper rollere.g. bearings years in on-road usecheck and after 3 years in off-road use. grease seal.

Clean taper roller bearings (using Dieselafter oil) 5thoroughly.

Dry and for re-useability.

Replace

Recommendation: Renew(ECO the taper roller bearings afterbetween 5 yearstaper in on-road after in 3 both yearsofinthe off-road use.

Work BPW special longlife grease Li-Plus) into the cavities rollers use and and the cage taper roller bearings.

Work BPW special longlife grease (ECO Li-Plus) into the cavities between taper rollers and the cage in both of the taper roller Smearbearings. grease into the hub's outer bearing race. Smear the lip of the new seal all round with BPW special longlife grease, ECO Li-Plus.

Clean the journals the axlerace. stub (metal beof bright, dry and from grease).

Smear withlonglife ECO grease, Smear grease intobearing the hub's outeronbearing Smearmust the lip the new sealfree all round with BPW special Li-Plus.

ECO Li-Plus. Clean the bearing journals on the axle stub (metal must be bright, dry and free from grease). Smear with ECO

Fit theLi-Plus. wheel hub, tighten the axle bolt whilst at the same time turning the wheel hub until the axle bolt torque limiter operates (clicks twice). DO NOT USE AN IMPACT DRIVER. Fit the retaining key through the window in the axle bolt and engage with Fit the wheel hub, tighten the axle bolt whilst at the same time turning the wheel hub until the axle bolt torque limiter operates toothed thrustwasher.

(clicks twice). DO NOT USE AN IMPACT DRIVER. Fit the retaining key through the window in the axle bolt and engage with

Insert toothed the hooked spring ring into the annular groove behind the rear edge of the hexagon axle bolt flats. Replace hub thrustwasher. sealing ring and cap (bayonet fitting).

Insert the hooked spring ring into the annular groove behind the rear edge of the hexagon axle bolt flats. Replace hub sealing ring and cap (bayonet fitting).

SHOULD YOU BE EXPERIENCING DIFFICULTY REMOVING THE HUB, CALL OUR CUSTOMER SERVICES DEPARTMENT FOR ADVICE - 0800 427 956

SHOULD YOU BE EXPERIENCING DIFFICULTY REMOVING THE HUB, CALL OUR CUSTOMER SERVICES DEPARTMENT FOR ADVICE - 0800 427 956 FOR MORE DETAILED INFORMATION PLEASE REFER TO THE BPW MAINTENANCE INSTRUCTION BOOK WHICH IS AVAILABLE FOR DOWNLOAD.

FOR MORE DETAILED INFORMATION PLEASE REFER TO THE BPW MAINTENANCE INSTRUCTION BOOK WHICH IS AVAILABLE FOR DOWNLOAD.

BPW Transport Efficiency Ltd

BPW Transport Efficiency Ltd

10 Echelon Place, Tamaki, Auckland PARTS | PO Box 58-106, Botany, Auckland 2163 TRUCK, BUSEast AND TRAILER SPECIALISTS Tel: (09) 273 8084 | Fax: (09) 273 8086 | Email: sales@tenz.co.nz | www.bpwte.co.nz

10 Echelon Place, East Tamaki, Auckland | PO Box 58-106, Botany, Auckland 2163 Tel: (09) 273 8084 | Fax: (09) 273 8086 | Email: sales@tenz.co.nz | www.bpwte.co.nz

TAKE A LOOK AT THESE KNORR PRODUCTS Authorised distributor

$1329.00

$279.00

Part no. KBLP4985

Part no. KBAE4604

Volvo FH12 DA12 Compressor

Volvo FH12 Multi Circuit Protection

NOW LETS KEEP THINGS ON THE LEVEL

$199.00

$349.00

Part no. KBII36151

Part no. KBSV3115

Pneumatic RTR Raise Lower valve

Manual Raise Lower Single Circuit

Part no. KBSV3111 Manual Raise Lower Dual Circuit

100 METERS OF BUNGEE CORD

$179.00 Part no. SYSCBB6-100

BRYDEN BRAKE RIVETING MACHINE, BEST IN THE INDUSTRY

6mm SHOCK CORD

Part no. SYSCBB8-100 8mm SHOCK CORD

$1.99 Part no. LTHM1 8mm SHOCK CORD HOOK

Part no. LTHM2 10mm SHOCK CORD HOOK

$2999.00 Part no. BYSM508

One t only p ime rice

BIG RED NARVA LED DRIVING LIGHTS This is your best chance to get Multivolt BIG RED lights for your sleigh while stocks last...

$179.00

$329.00

Part no. ELNBR8990

Part no. ELNBR9030

180mm Free Form Driving Light

220mm 30x 5w LEDs High Power

3x 10w LEDs

Part no. ELNBR9000

$249.00

220mm Free Form Driving Light

Part no. ELNBR9020

3x 10w LEDs

180mm 18x 5w LEDs Natural White light

$89.00

$219.00

Part no. ELNBR9110

Part no. ELNBR9220

305mm Wide Light Bar Single layer

610mm Wide Light Bar Dual layer Combo

Can’t see these prices lasting into 2020, So Merry Christmas and Happy New Year from all the team at Commercial Transport Spares.

SALES REPRESENTATIVES

SALES MANAGER

KIERAN MORRISON Canterbury & West Coast

MIKE HAYWARD Otago & Southland

e. kieran.morrison@ctsltd.co.nz t. 03 349 1978 m. 027 446 0025

e. mike.hayward@ctsltd.co.nz t. 03 260 8002 m. 022 326 2751

SHANE DOWLING Canterbury, Nelson & Marlborough

TAMA TITO North Island Sales

e. shane.dowling@ctsltd.co.nz t. 03 344 2779 m. 027 441 1403

e. tama.tito@ctsltd.co.nz e. sales.ak@ctsltd.co.nz t. 09 950 2652 m. 027 550 1120

PHIL CARTER South Island Sales Manager e. phil.carter@ctsltd.co.nz t. 03 344 2771 m. 021 193 2571

TERMS AND CONDITIONS

Offers and prices are for a limited time, while stocks last.

All prices quoted exclude GST. OEM names and numbers are used as reference only.

Pricing for trade account customers only.

www.ctsltd.co.nz