STAGES & RISERS SETUP
GUIDE
Stages
Band Risers
Seated Risers
Choral Risers
General Information SETUP GUIDE STAGES & RISERS
Platform
Constructed with a ¾" thick solid plywood core, the riser is surfaced with one of the following: Option 1: Carpet Option 2: 1/8" thick tempered hardboard. The edges of the platform are routed to allow the frame to fit flush with the top surface and cover the ends of the carpeting.
Frame
16 gauge, 1-13/16" high formed steel channel frame is reinforced with 16 gauge steel angle welded to the inside of the channel. The angle provides a continuous support to which the deckingis secured with screws placed a maximum of 9" apart. The frame completely encloses the top, bottom and edges of the decking perimeter preventing the decking from becoming loose and damaged. All areas where frame parts are joined together are reinforced with steel plates attached with rivets.
Leg Structure
Each leg structure is constructed with 1.05" diameter, 14 gauge steel tubing capped at the point of floor contact with high impact plastic glides. The vertical load bearing members are joined at the top by foil width, steel tube to provide maximum support to the stage deck. The top of each leg assembly folds open and closed, using 16 gauge steel saddle clips that are secured with at least four screws. Leg assemblies are braced by friction type braces, equipped with a spring locking device to secure the legs in the open and closed position. Braces are secured to the leg assembly with rivets and to the deck using 8 screws installed through the decking. Legs open and close using only one hand.
Ganging
Stages and risers are equipped with drop-in couplings that allow units of the same or different heights to be joined together. All ganging devices are permanently secured to each unit.
Finish
All metal parts are finished with a black thermofused epoxy powder coating.
Capacity
All metal parts are designed to carry a uniform live load of at least 200 lbs. per square foot.
Portability
Stages and risers are capable of being completely set-up and taken apart quickly, without the need for tools, by two people of average strength.
Dimensions & Capacities
All dimensions and capacities shown in this booklet are estimated. Capacities may vary depending on the amount of space between chairs and the size of instruments.
Warranty
Stages and risers are covered by a 10-year warranty.
STAGES & RISERS
& Risers
Stages & Band Risers
Seated Risers
Choral Risers
Pie Sets
Single level using 48” Stages
A 4 x S4816 B
D 21 x S4816 G
STAGES & RISERS
Band Risers
Elevation using 48” Stages
Capacities may vary depending on the amount of space between chairs and the size of instruments.
Band Risers
Curved Layout
Bow Set-up
Ring Set-up
Oval Set-up
Seated Risers STAGES & RISERS
Bow Set-up
Ring Set-up
Oval Set-up
Choral Risers
Using Model RS2L
Using Model RS3L Straight Edge
Using Model RS4L
Choral Risers
Tapered Edge
Using Model RT2L
Using Model RT3L
Using Model RT4L
Stages & Risers Accesories
Back Guard Rail
For use with choral risers
Model # Description
GRR24S
Chair Guard
Back Guard Rails for 3 Level
Straight Standing Choral Risers
GRR32S Back Guard Rails for 4 Level
GRR24T
GRR32T
GRTPR3
Straight Standing Choral Risers
Back Guard Rails for 3 Level
Tapered Standing Choral Risers
Back Guard Rails for 4 Level
Tapered Standing Choral Risers
Back Guard Rails for 3 Level
TransPort Riser
GRTPR4 Back Guard Rails for 4 Level
TransPort Riser
CG28Chair Guard for SP368 Stage Pie
CG32 Chair Guard for Sides of 3'x8' Stages
CG37 Chair Guard for SP488 Stage Pie
CG44Chair Guard for Sides of 4'x8' Stages
CG54 Chair Guard for SP3616 & SP4824 Stage Pie (2 EA. Needed for SP4824)
CG72 Chair Guard for SP4816 Stage Pie
CG81 Chair Guard for SP3624 Stage Pie
CG96 Chair Guard for Back of Stages (3'x8' & 4'x8')
Side Guard Rail
For use with standing risers
Dolly
For use with stages & seated risers (Minimum 36” wifths)
Skirting Options
Stage Guard Rail
The Ultimate Stage Configurator
With this new tool from National Public Seating, you will be able to design your own configuration of stages and risers, fully customized for your space and needs.
IT'S QUICK, IT'S SIMPLE, IT'S POWERFUL!
Easily move, rotate, and arrange each element to fit your unique setup. Add or remove products as needed to create the perfect configuration.
You can also enhance safety and accessibility by adding steps and guardrails where needed. Quick Customization
Choose Your Perfect Finish
Choose from a variety of carpet colors or opt for a sleek hardwood look to match your venue's style.
Design your stage setup with total freedom and download a comprehensive list of all the products used in your design for easy reference or ordering. Easy Download
START CREATING NOW!
