Materialdataiscollectedingoodfaithfromoursuppliers,alternativelyfromrawmaterialmanufacturers,andmaydifferdependingonthetest methodused.Toensuretherespectivevalue.NordicPlasticsGroupdisclaimsallresponsibilityinconnectionwiththeuseofthedata
Nordic Polytech Group, Omvägen 17, SE-231 61 Trelleborg, Sweden. Tel +46 (0)10-707 80 00 www.npgroup.se Version:2022
Physical properties Test method UnitValue Molecular-weight k.a. 0,5 Mio. g/mol. 0,5 Mio. g/mol. Density DINENISO 1183-1,, ASTM D792 > 0.960 g/cm3 > 59.931 lb/ft3 Notched impact strength DINENISO 21304-2 >15 kJ/m2 >7,1325 ft-lb/in2 Abrasion-Index (Sand-Slurry) DINENISO 15527 350-450350-450 Tensile strength at yield (1 B - 50mm/Min.) DINENISO 527-2, ASTM D 638 >20 N/mm2 >2900 psi Elongation (Break /1 B - 50mm/Min.) DINENISO 527-2 ASTM D 638 >150 %>150 % Tensile-E-modulus (1B - 1mm/Min.) DINENISO 527-2, ASTM D 638 >900 N/mm2 130500 psi Static Friction ASTM D 1894 0.15-0,220.15-0,22 Dynamic Friction ASTM D 1894 0.10-0,150.10-0,15 Shore-D-Hardness, 3 sec. value 6 mm plateDINENISO 868 65-67 D65-67 D Ball indentation hardness DINENISO 2039 50 N/mm2 7250 psi Water absorption DINENISO 62 < 0.01 %< 0.01 % Thermal properties Test method UnitValue Melting Point (DSC) DINENISO11357-1 133-137°C 271,4- 278,6°F Thermal Conductivity Wire method -0.41 W/m*K2.84253(BTU-in)/hr-ft2 Max. operation temperature Literature 80 ·c176 °F Coefficient of thermal expansion (23 - 80°C)ISO 11359 0,00015-.0.00020mm/mm0,000083-0.000111in/in°F Electrical properties Test method UnitValue Volume resistivity DINEN 62631-3-1 1.0E14 Ohm*cm 1.0E14 Ohm*cm Surface resistivity DINEN 62631-3-2 1.0E13 Ohm1.0E13 Ohm ATEX-Directive - TOV approved! ATEX-Directive ESD-D OhmOhm Burning properties Test method UnitValue Fire resistance (Self-classification) DIN 4102 B2 KlasseB2 Class Fire resistance (Self-classification) UL 94 HB KlasseHB Class properties Test method UnitValue Food compliant
Productcharacteristics
PE 500 Reg Black