Division 3 Form Sealers Treated
PRODUCT GUIDE
Untreated
Division 3 Form Sealers Form Release Agents Maintenance & Protection For Forms & Equipment Evaporation Reducers/Surface Set Retarder Cures, Sealers & Hardeners Tilt-Up Cure & Bondbreakers Concrete Cleaners Concrete Adhesives/Patching Materials
Division 7 Dampproofing Sealers/Water Repellents
Division 9 Decorative Floor/Wall Stains & Sealers Joint Fillers Resinous Flooring/Overlayments Floor Coatings - Low, Medium & High Build Floor Coating Stripper
Clear Pre-Form
Transparent, Penetrating, Solvent Based Polyurethane Wood Sealer
Extends the life of plywood forms by reducing the absorption of alkaline bleed water. Improves concrete surface appearance by preventing soluble wood sugar migration which can cause concrete surface retardation. Ideal for use with dimensional lumber, plywood, waferwood, OSB, fiberboard and particle board concrete forms and rustication strips.
Edge-Flex 645
Tough, Flexible, Water Based Wood Edge Sealer
Extends concrete forming panel life and reduces edge swell by reducing the absorption of alkaline bleed water through panel edges. Ideal for use with all types of plywood, waferwood and OSB concrete forming panels.
Pre-Form HB
Pigmented, High Build, Solvent-Free Polyurethane Coating System
Creates uniformly smooth, planar concrete surfaces by covering the imperfections, rough surfaces and screw holes of concrete forming surfaces. Prevents wood grain pattern telegraphing of plywood forms onto formed concrete surfaces. Ideal for use in gang-forming applications, on precast plywood tables or to resurface damaged wood and steel forms.
This symbol indicates products which offer a version for building green, respecting the environment and protecting people.
Application Equipment • chemical
er Prod
•c
om p
•
p Partn
atibility
P R O D U C T
•
ucts
•
This symbol indicates products which are part of our Tilt-Up Partner Products system. These products are designed to work together for optimal performance on tilt-up projects.
D A T A hemical• •c
Tilt-Up Partner Products co mpatibility
•
DURO-NOX
•
Tilt-U
Maximum performance, chemically reactive, water based, silicate type sealer, hardener and dustproofer. u Allows the floor to breath, preventing hydrostatic
APPLICATIONS
pressure related adhesion failure.
u May be used in conjunction with all NOX-CRETE
SILCOSEAL bondbreakers for tilt-up construction.
u Meets all federal and state VOC requirements and is USDA approved.
u Use to seal, harden and dustproof new concrete or
existing concrete floors.
u Ideal for use in warehouses, distribution centers, large
retail centers, office complexes, food processing plants, dairies, breweries, slaughtering plants, food lockers, animal pens, bottling plants, chemical plants, etc.
� PRECAUTIONS �
u Do not use on latex or epoxy polymer modified concrete.
u Do not use on concrete previously treated with wax or resin cures, sealers and bondbreaker compounds without their prior removal by chemical or mechanical means as their presence interferes with the penetrating properties of DURO-NOX.
u Use to dustproof vertical concrete surfaces in situations
where dust formation would pose an appearance problem or a contamination problem with building contents, equipment and/or occupants, such as concrete tanks for potable water and other liquid or bulk contents, basements and garages.
increases surface hardness up to 12%.
u Hardens and increases the abrasion, impact and
and below 120° F (49° C).
penetration.
u Reduces the porosity of concrete surfaces, providing chemical resistance to most organic acids, alkalis, salts, foods, fats, oils, greases and solvents and sufficient resistance to inorganic acids to permit successful cleanup of spillage.
exposure occurs, immediately flush with water. Failure to do so may result in permanent surface discoloration.
u Before using on colored concrete, contact NOX
u If considering the use of DURO-NOX to cure freshly
placed concrete, contact NOX-CRETE prior to use for specific limitations and use instructions.
u Some form of surface preparation is generally
required prior to top coating DURO-NOX treated floor surfaces with a subsequently applied paint or coating. For specific surface preparation procedure recommendations see ICRI guideline No. 03732.
u Densifies, strengthens, seals and dustproofs soft or
dusty concrete floors.
u Improves the adhesion of subsequently applied line
stripes, paints and coatings to soft or weak concrete surfaces.
u Overall performance and life far surpasses that of
conventional membrane forming acrylic cure and seal type products.
u Green Engineered™ – better for health and the
USE INSTRUCTIONS u Request current product literature, labels and
material safety data sheets from manufacturer and read thoroughly before product use.
u Site environmental conditions, substrate conditions
and concrete mix design have a major effect on product selection, application methods, procedures and rates, appearance and performance. Product literature provides general information applicable to
environment.
nox-crete tm
chemical solutions to concrete problems
1
3
CRETE for specific procedures required. Incorrect application procedures could result in unacceptable discoloration of the concrete surface.
cures, sealers & hardeners
wear resistance of concrete floors where high volumes of pedestrian and/or vehicular traffic are expected.
u Provides permanent protection to the depth of
u Apply at substrate temperatures above 40° F (4° C) u Avoid contact with glass, aluminum and steel. If
ADVANTAGES u Increases abrasion resistance up to 39% and
DURO-NOX
HOW IT WORKS DURO-NOX deeply penetrates the pores of concrete surfaces where it can chemically react with the available lime to densify and harden the surface from within.
Additional product information and full Product Data Sheets for all Nox-Crete products are available online at www.nox-crete.com.
Division 3 Form Release Agents Alumi-Con
Nox-Crete PCE
Economical, Super Concentrated Form Release Agent For Aluminum Forms
Economical alternative to petroleum based specialty form release agents. Dilutes easily with water using NoxCrete’s Mix Station. Variable dilution rate allows user to maximize product performance and economy. Improved emulsion technology keeps product well mixed to minimize separation.
Alumi-Nox
Maximum Performance Form Release Agent For Aluminum Forms
Maximum Performance Architectural Form Release Agent
100% biodegradable, water based formulation. Produces architectural concrete surfaces free of staining and with substantially fewer surface defects. Dries to form a nonslippery film which resists removal by rain, foot traffic and scouring during concrete placement. Ideal for use with low slump, high density or superplasticized concrete mix designs.
Pallet-Nox
Precast Pipe, Block And Paver Form Release Agent
Available in both petroleum and water based versions. Produces improved concrete surfaces free of staining and with reduced spalling, bugholes and surface voids. Minimizes concrete buildup on form surfaces and panel edges. Performs well with concrete mix designs utilizing chemical and mineral admixtures such as fly ash and blast furnace slag.
100% biodegradable, water based formulation for precast pipe head rings and block and paver pallets. Combines chemical and barrier type release properties for easy removal of pallet and header rings. Produces improved concrete surfaces with no staining and fewer surface voids (bugholes). Ideal for dip tank applications.
Bio-Nox
Pro-Release
Maximum Performance, Biodegradable Form Release Agent
100% biodegradable, water based formulation. Produces architectural concrete surfaces free of staining and with substantially fewer surface defects. Ideal for forming substrates sensitive to solvents and petroleum.
Chembeton
Economical, General Purpose Form Release Agent
Combines both chemically active and physical barrier type release properties in a petroleum based formulation. Fastdrying. Resists removal by normal rain showers.
Form Clean
Dual Purpose Form Cleaner And Form Release Agent
Available in both petroleum and water based formulations. Removes hardened concrete buildup through repeated use while forms are in service while also acting as a release agent. Cost effective alternative to abrasive blasting, acid washing and scraping and will not damage forms. Extremely effective on aluminum and steel forms.
Nox-Crete Form Coating
Maximum Performance Form Release Agent
The world’s first chemically active form release agent. Available in petroleum, water based and biodegradable water based versions. Unparalleled performance. Extends form life on non-overlaid plywood, dimensional lumber and MDO plywood concrete forms. Improves concrete surface appearance with no staining and reduced surface voids (bugholes).
Economical, General Purpose Form Release Agent
Low odor, chemically reactive, ready-to-use water based product incorporates improved emulsion technology to keep product well mixed. Specifically formulated for today’s concrete mix designs incorporating fly ash. Contains no diesel fuel or kerosene.
Precast Release #80
Maximum Performance Precast Form Release Agent
Available in both petroleum and water based formulations. Combines chemical and barrier type release properties. Produces architectural concrete surfaces free of staining and with substantially fewer surface defects. Ideal for steam-cured precast concrete and precast mix designs using high amounts of cement, fly ash, silica fume or highrange water reducers.
Release Agent #10
Maximum Performance Architectural Form Release Agent
Available in both petroleum and water based formulations. Produces architectural concrete surfaces free of staining and with substantially fewer surface defects. Ideal for forms which see daily use or aggressive stripping schedules.
Utility Release Concentrate
Economical, Super Concentrated Form Release Agent
Dilutes easily with water using Nox-Crete’s Mix Station. Variable dilution rate allows user to maximize product performance and economy. Improved emulsion technology keeps the product well mixed to minimize separation.
2
Division 3 Maintenance & Protection For Forms & Equipment
Evaporation Reducers/ Surface Set Retarder
Blast-Off
Fast Acting, Non-Corrosive, Biodegradable Concrete Remover
Fast acting; contains no mineral-based acids. Quickly removes cement and concrete buildup on concrete mixers, pumps, paving machines, screeds, saws, tools and more. Non-corrosive to equipment, safe for workers and environmentally 100% biodegradable.
Deactivator
Maintenance Coating And Cleaning Compound
Crete-Nox TA
Concrete Surface Set Retarder For Exposing Horizontal Aggregate
Produces decorative exposed aggregate surfaces without the critical time requirement of the “wet wash” method. More economical than mechanical texturing and produces a true aggregate finish without the dulling of other methods.
The world’s first chemically active maintenance coating and cleaning compound. Available in both petroleum and water based formulations. Softens hardened concrete buildup for easy removal and helps prevent accumulation of new buildup on treated steel surfaces. Will not damage paint or rubber hoses. Ideal for use on laser screeds, paving machines, concrete pumps, concrete mixers and other concrete placing equipment.
Form Clean
Dual Purpose Form Cleaner And Form Release Agent
Available in both petroleum and water based formulations. Cleans forms while they are in service without the application of an additional product to act as a release agent. Through repeated use, concrete buildup is softened and removed. Cost effective alternative to abrasive blasting, acid washing and scraping and will not damage forms.
Formgard TJ
Specialized Rust Inhibitor For Steel Forms
Protects steel forms in storage from rusting for up to six months. Can also be used as a release agent in precast yard applications.
Seasonox
Seasoning Compound For Aluminum Forms
Minimizes the natural reactivity between aluminum and fresh concrete by creating a protective barrier that reduces buildup and sticking. Can be used on new aluminum concrete forms or used forms which have been acid cleaned, abrasive blasted or high-pressure power washed. 3
Monofilm
Concentrated Surface Water Evaporation Reducer
Extends the time available for concrete finishing during hot/dry/windy conditions. Reduces surface moisture evaporation on freshly placed concrete up to 80% in wind and 40% in sunlight. Reduces surface crusting, shrinkage cracking and the development of moisture envelopes that lead to spalling. Also available in a ready-to-use formulation.
Division 3 Cures, Sealers & Hardeners Bro-Cure
Duro-Floor Classic System
Silicate Based Concrete Curing, Hardening And Sealing Compound
Use on surfaces which will receive subsequent coatings or coverings when water curing, burlap or polyethylene are not viable alternatives. Treated surfaces will have increased compressive strength and resistance to staining. Reduces concrete surface crazing and cracking. Contains a red fugitive dye for easy application.
Cure & Seal 100, 150 & 250 E
Duro-Nox
Water based formulations provide an economical, mediumgloss finish. Non-yellowing. All comply with ASTM C 309, Type 1, Class A & B and AASHTO M 148, Type 1, Class B. Cure & Seal 250 E also complies with ASTM C 1315, Type 1, Class A & B. Solids content by version is 10%, 15% and 25% respectively.
Cure & Seal 1200 E
Tilt-Up
m • che ical
Partner om p
Product
s
atibility
•
High performance formulation hardens, seals, densifies and dustproofs new and existing concrete floors. Increases abrasion, impact and wear resistance. Develops a lustrous sheen through regular use. 20-year performance warranty available.
Duro-Nox LS
Water based formulation provides superior film integrity with a high-gloss finish. Non-yellowing. Complies with ASTM C 309, Type 1, Class A & B and, AASHTO M 148, Type 1, Class B.
Cure & Seal 1315 A
Silicate Type Liquid Floor Hardener, Sealer And Densifier
High Solids Acrylic Copolymer Curing, Sealing And Dustproofing Compound
Lithium Based, Silicate Type Liquid Floor Hardener, Sealer And Densifier
Tilt-Up
m • che ical
Partner om p
•c
100% Methyl Methacrylate Acrylic Curing And Sealing Compound
•
Designed primarily for industrial and commercial warehouse floors. System combines the application of a liquid floor hardener and an ultra-high gloss polish to achieve a tough, durable, high-gloss floor finish.
•
Acrylic Copolymer Resin Type Curing And Sealing Compounds
Transparent Liquid Floor Hardener And Polish System For Concrete Floors
•c
Product
s
atibility
•
High performance formulation hardens, seals, densifies and dustproofs new and existing concrete floors. Increases abrasion, impact and wear resistance. Does not require the costly and environmentally-damaging rinse removal step necessary with application of traditional silicate type liquid floor hardeners. Develops a lustrous sheen through regular use. 20-year performance warranty available.
Solvent based formulation provides high gloss and meets the moisture retention requirements of ASTM C 1315, Type 1, Class A & B; ASTM C 309, Type 1, Class A & B; and, AASHTO M 148, Type 1, Class B.
Duro-Nox LSC
Ecoseal
Economically hardens, seals, densifies and dustproofs new and existing concrete floors. Increases abrasion, impact and wear resistance. Does not require the costly and environmentally-damaging rinse removal step necessary with application of traditional silicate type liquid floor hardeners. Particularly well-suited for use on colored, dyed or stained concrete without causing white surface discoloration.
Economical, solvent-based, transparent, UV light resistant acrylic sealer produces an abrasion resistant film that protects concrete. Enhances surface colors with a highgloss, “wet look” sheen. Primarily designed for exterior applications. Available in two lower VOC formulations using VOC exempt solvents. Complies with ASTM C 309, Type 1, Class A & B and AASHTO M 148, Type 1, Class B.
Tilt-Up
m • che ical
Partner om p
•c
Economical, General Purpose, UV-Light Resistant Acrylic Sealer
Standard Performance, Lithium Based, Silicate Type Liquid Floor Hardener, Sealer And Densifier
•
Product
atibility
s
•
4
Division 3 Tilt-Up Cure & Bondbreakers
Duro-Polish
m • che ical
Concentrated, Synthetic Polymer Floor Polish Tilt-Up
Partner
•c
om p
•
Product
atibility
s
•
Water based formulation gives an immediate high-gloss finish that requires no buffing. The finish is scuff and scratch resistant and adds slip-resistance. Use on liquid silicate or siliconate hardened concrete floors, acid stained concrete, concrete sealed with acrylic, epoxy and polyurethane and on stone, tile and terrazzo. Meets the static coefficient of friction requirements of ASTM D 2047.
Duro-Polish Plus
Tilt-Up
m • che ical
Partner om p
•c
Concentrated, Synthetic Polymer Floor Polish With Stain Blocker
•
Silcoseal Classic
Product
atibility
s
•
Synthetic Resin Polymer Curing Compound
Economical, water based formulation for effective curing of horizontal concrete surfaces. Minimizes concrete surface crazing and cracking. Complies with ASTM C 309, Type 1, Class A & B and AASHTO M 148, Type 1, Class B.
Medium Gloss, Acrylic Sealer For Decorative Concrete
Transparent, penetrating, water based, non-yellowing, U.V. light resistant acrylic sealer for decorative concrete. Produces a tough, abrasion-resistant film that protects surfaces from absorption and damage from water, dirt, deicing salts, oil and grease. Enhances surface colors and appearance with a medium-gloss sheen. Can be used in interior or exterior applications. Complies with ASTM C 309, Type 1, Class A & B and AASHTO M 148, Type 1, Class B.
Sparkl-Seal VOC
High Gloss, Acrylic Sealer For Decorative Concrete
Transparent, penetrating, solvent based, non-yellowing, UV light resistant acrylic sealer for decorative concrete. Produces an abrasion-resistant film that protects surfaces from absorption and damage from water, dirt, food, deicing salts, oil and grease. Enhances surface colors and appearance with a high-gloss, “wet look” sheen. Primarily designed for exterior applications. Complies with ASTM C 309, Type 1, Class A & B and AASHTO M 148, Type 1, Class B. 5
m • che ical
Tilt-Up Cure And Bondbreaker Tilt-Up
Partner
om p
Product
s
atibility
•
Water based, wax-free formulation offers the latest advances in bondbreaker technology, emulsion stability and job site safety. Produces uniformly colored wall panels with exceptional surface appearance. Offers improved resistance to the “osmotic effect.” Meets all current state and federal VOC requirements.
Silcoseal 2000F
m • che ical
Tilt-Up Cure And Bondbreaker Tilt-Up
Partner
om p
•
•c
Sparkl-Seal E
Silcoseal Select
•
Resin Cure E
The world’s first chemically active cure and bondbreaker. Solvent based and wax-free formulation dries quickly and resists rain wash-off. Produces uniformly colored wall panels with exceptional surface appearance. Also available in a low VOC formulation.
•c
The same benefits of Duro-Polish with the added advantage of stain resistance. Provides stain protection from the most common stain-causing agents found in grocery stores, restaurants, warehouses and distribution centers. Use on concrete floors previously treated with liquid silicate or siliconate hardeners.
Tilt-Up Cure And Bondbreaker
Product
atibility
s
•
Water based, wax-free formulation sets the industry standard for performance. Produces uniformly colored wall panels with exceptional surface appearance. Offers improved resistance to the “osmotic effect.”
Division 3 Concrete Cleaners Bio-Clean/Bio-Clean Ready
Citrus Based Cleaner And Degreaser
Fast acting, 100% biodegradable, non-toxic formulation. Removes many organic contaminants, tire marks and oil and grease drippings. Also removes bondbreaker and curing compound residue. Bio-Clean is a concentrated, dilutable formulation and Bio-Clean Ready is ready-to-use.
Bio-Strip
Concentrated, Citrus Based Floor Coating Stripping Gel
Acryl-Binder
Acrylic Copolymer Admixture And Bonding Agent
Improves the physical strength and bonding properties of all portland cement based mortars and concrete. Use in horizontal, vertical and overhead applications. Self-curing and non-reemulsifiable.
Acrylic Patch
Acrylic Polymer Modified Repair Mortar
Fast-setting, portland cement based repair mortar for patching spalls, honeycombs, holes, cracks and surface defects over 1/2 inch in depth. Complies with ASTM C 928 Rapid Hardening Type.
Construction Grout
Shrinkage Controlled, Multi-Purpose Construction Grout
Portland cement based, high strength, non-corrosive formulation. Use to grout voids and anchor heavy equipment, bolts and dowel bars. Can be used in dry pack, plastic or flowable consistencies and is easily pumped. Complies with CRD-C621, ASTM C 1090 and ASTM C 1107 Grade C, Combination Pre-Hardening and Post-Hardening Volume-Adjusting (Non-Shrink) Grout.
Dauergrout E
Epoxy/Polyurethane Copolymer Mortar
Extremely tough, high strength, chemical and abrasion resistant formulation. Trowel applied, two component system for patching, grouting, reprofiling and topping concrete floors. Offers exceptional bond to existing cementitious materials. Meets USDA and FDA requirements.
Acrylic Polymer Modified Repair Mortar
Portland cement based repair mortar for patching and restoring concrete floors, walls, precast members and tilt wall panels with shallow defects and spalls less than 1/2 inch in depth. Can be smoothly featheredged.
Hydroplug
Non-Shrink, Expansive Type Hydraulic Cement
Extremely fast-setting formulation for the repair of underwater concrete or concrete subject to hydrostatic pressure. Seals the flow of water in 3-6 minutes and sets up underwater and in temperatures below 320 F (00 C).
Panel Patch
Polymer Modified Concrete Resurfacing And Finishing Compound
Tilt-Up
m • che ical
Partner om p
•
Concrete Adhesives/ Patching Materials
•c
Fast acting, 100% biodegradable, non-toxic formulation removes acrylic curing and sealing compounds, oil and latex paints, varnish, lacquer, enamels and more. Softens most paints and coatings in less than 40 minutes. Gel consistency is ideal for use on horizontal and vertical surfaces.
Feather Patch
Product
atibility
s
•
Portland cement based formulation has a smooth, creamy consistency that is grit-free and can be featheredged for smooth transitions. Drys fast - in as little as 15 minutes. Ideal for repair of tilt-up, precast and cast-in-place wall surfaces.
Precision Grout
Shrinkage Compensated Precision Grout
Contains a special blend of shrinkage compensating cements and special mineral aggregates for controlled expansion and maximum strength. Use to grout voids and anchor heavy equipment, bolts and dowel bars. Complies with CRD-C621, ASTM C 1090 and ASTM C 1107 Grade C, Combination Pre-Hardening and Post-Hardening VolumeAdjusting (Non-Shrink) Grout.
Quick Patch
Fiber Reinforced Repair Mortar
Formulated with fast-setting cements that allow repaired surfaces to be returned to service in as little as 2 hours. Up to 3,000 psi strength gain in 3 hours. Use to repair spalls over 1/4 inch in depth on driving surfaces, bridge decks and industrial floors. Can also be used in cold weather or refrigerated environments. Complies with ASTM C 928.
Rapid Rock
Expansive Type, Calcium Aluminate Cement Based Anchoring/Repair Mortar
Develops high early strength - sets in 20 minutes. Use to anchor bolts, dowels, pipe, rod, posts and other fixtures into concrete. Gypsum-free.
Vertical Patch
Vertical And Overhead Repair Mortar
Portland cement based formulation. Thixotropic viscosity allows overhead and vertical repairs without the need for forming. Use to repair spalls, honeycombs, cavities and voids more than 1/2 inch in depth.
Vinyl-Hesive
Polyvinyl Acetate Bonding Agent And Admixture
Reemulsifiable and rewettable for longer working time. Improves the physical and bond strength properties of cement based repair products and stucco. Minimizes shrinkage and increases the service life of repair mortars. Water based formulation. 6
Division 7
Division 9
Dampproofing Sealers/ Water Repellents
Decorative Floor/Wall Stains & Sealers
Stifel GC
Silane Sealer For Horizontal & Vertical Concrete, Concrete Masonry & Brick Masonry
Water based formulation incorporates a low molecular weight silane that does not evaporate under site application conditions, allowing for deep penetration (up to 1/2 inch). Treated surfaces are protected from damage from freeze/ thaw cycles, deicing salts and the absorption of water. The appearance of treated surfaces is not affected and surfaces breathe naturally.
Stifel SC
Maxiumum Performance Silane Sealer For Horizontal Concrete
Water based formulation incorporates a low molecular weight silane that does not evaporate under site application conditions, allowing for deep penetration (up to 1/2 inch). Treated surfaces are protected from damage from freeze/ thaw cycles, deicing salts and the absorption of water. The appearance of treated surfaces is not affected and surfaces breathe naturally.
Stifel VC
Economical Silane Sealer For Vertical Concrete, Concrete Masonry & Brick Masonry
Water based formulation incorporates a low molecular weight silane that does not evaporate under site application conditions, allowing for deep penetration (up to 1/2 inch). Treated surfaces are protected from damage from freeze/thaw cycles, deicing salts and the absorption of water. The appearance of treated surfaces is not affected and surfaces breathe naturally. 7
Acryl Pen
Acrylic And Silane Sealer And Stain For Exterior Horizontal Concrete
Penetrates and bonds permanently with exterior broomfinished or textured concrete to provide long-lasting color and protection that will not fade, chalk or flake. Contains a patented silane for outstanding water repellency. Surfaces are protected from abrasion, delamination, freeze/thaw damage and staining from food and oil. Minimal surface film accumulation allows excellent water vapor transmission. Available in 11 standard colors and custom colors.
Division 9 Nox-Carb
Partner
om p
•
Tilt-Up
Joint Fillers
m • che ical
Acrylic And Silane Sealer And Stain For Exterior Vertical Concrete •c
Product
atibility
s
•
Penetrating, breathable, water repellent sealer/stain offers maximum protection for exterior vertical concrete surfaces. Formulated with 100% methyl methacrylate acrylic resin and a patented silane for enduring color and outstanding water repellency. Will not fade, flake or peel. Available in 10 standard colors and custom colors. 10-year warranty available.
Unprotected
Protected With Clean Shave
Clean Shave
Stain Blocking Film For Joint Filler Application
Water based, low odor, low VOC, copolymer stain blocking film. Protects concrete from stains caused by joint filler overfill during joint filler application. Also facilitates the joint shaving process, helping to minimize chatter. Removes easily with water once joint filler application has been completed.
Dynaflex JF-85
m • che ical
Polyurea Concrete Floor Joint Filler For Heavy Duty Service Tilt-Up
Partner
•c
om p
•
Product
atibility
s
•
100% solids, self-leveling formulation is fast-setting and tack-free in less than 5 minutes. Protects industrial floor saw cut crack control joint edge shoulders from edge fractures. Combines high Shore Hardness (85A) with good elongation (500%). For use in heavy duty service applications.
Versacryl
Methyl methacrylate acrylic resin and water repellent silane formulation penetrates deep into concrete’s micro-pores. Improves the appearance of concrete with durable color that will not fade, chalk or peel. Protects concrete from water absorption and stain discoloration while allowing water vapor transmission. Available in 11 standard colors and custom colors.
Dynaflex 502
m • che ical
Epoxy/Polyurethane Concrete Floor Joint Filler For Heavy Duty Service Tilt-Up
Partner
om p
•c
Acrylic And Silane Stain For Interior And Exterior, Vertical And Horizontal Concrete
•
Product
atibility
s
•
100% solids, moisture insensitive, semi-rigid formulation. Develops strength quickly by curing from the inside out. Protects industrial floor saw cut crack control joint edge shoulders from edge fractures. Flexibilized for minimal movement without debonding. Use in heavy duty service applications requiring a minimum Shore Hardness of 80A. 8
Division 9 TP-Joint
Tilt-Up
Floor Coatings Low, Medium & High Build
m • che ical
Partner om p
•c
Temporary Joint Filler For Concrete Slabs
•
Product
atibility
s
•
Patented. Flexible and pre-molded for quick, economical installation. Installed using the TP-Joint Roller, over 1,000 feet can be easily installed in 1 hour. Masks casting/floor slab saw cut crack control joints for production of tilt wall panels without a concrete fin, reducing costly panel surface grinding. Helps minimize joint contamination and joint edge shoulder damage during construction.
Resinous Flooring/Overlayments Dauercast DQ
Transparent, Epoxy Resinous Flooring System With Multi-Colored, Ceramic-Coated Decorative Quartz Aggregate
Produces a seamless, high-impact flooring system with an integral cove base. Includes the broadcast application of a ceramic-coated decorative quartz aggregate with a transparent, epoxy resin binder and top coat. Provides excellent chemical, abrasion and slip resistance with a customized decorative appearance.
Dauerseal 30E
Low Build, Transparent, Epoxy Resin Sealer
Water based, self-priming formulation. Creates a smooth, glossy coating that improves attractiveness of substrates and improves the light reflectivity of interior environments. Coating is tough and durable with abrasion and chemical resistance.
Dauercast SQ
Pigmented, Epoxy Resinous Flooring System With Standard Quartz Aggregate
Produces a seamless, high-impact flooring system with an integral cove base. Includes the broadcast application of a quartz aggregate with a pigmented, epoxy resin binder and top coat. Provides excellent chemical, abrasion and slip resistance with a customized pigmented, decorative appearance.
Dauergrout E
Epoxy/Polyurethane Copolymer Flooring System
Extremely tough, high strength, chemical and abrasion resistant formulation. Trowel applied, two component system for patching, grouting, reprofiling and topping concrete floors. Offers exceptional bond to existing cementitious materials. Meets USDA and FDA requirements.
Staldec SLF
Pigmented, Polyurethane, High Build, Self-Leveling Floor Coating
Reactive, rapid curing, self-leveling, non-shrinking, solventfree, two component floor coating for interior applications. Provides a smooth, seamless, highly abrasion resistant surface which is easily cleaned.
9
Dauerseal 60E
Low Build, Pigmented, Epoxy Resin Coating And Sealer
Water based, self-priming formulation. Creates a smooth, glossy coating that adds color to substrates and improves the light reflectivity of interior environments. Coating is tough and durable with abrasion and chemical resistance.
Dauerseal S
Medium Build, Epoxy Resin Coating And Sealer
Pigmented or transparent, 100% solids, light stable, nongassing, rapid curing. Creates a smooth, glossy coating which improves the attractiveness of substrates and the light reflectivity of interior environments. Coating is tough and durable with abrasion and chemical resistance.
Division 9 Floor Coating Stripper Bio-Strip
Concentrated, Citrus Based Floor Coating Stripping Gel
Fast acting, 100% biodegradable, non-toxic formulation removes acrylic curing and sealing compounds, oil and latex paints, varnish, lacquer, enamels and more. Softens most paints and coatings in less than 40 minutes. Gel consistency is ideal for use on horizontal and vertical surfaces.
Application Equipment Ideal Form And Concrete Sprayer
Perfect Form And Concrete Sprayer
Pump Foamer
Perfect Power Sprayer
Mix Station
Ideal Form And Concrete Sprayer
Perfect Power Sprayer
Equipped with a polypropylene tank and trigger valve, brass wand and chemical resistant hose, seals and gaskets. Includes discharge filter in the tank and an eight foot coiled hose. Uniformly applies concrete form release agents, tilt-up bondbreakers, curing compounds, floor sealers and other construction chemicals.
Equipped with electric powered heavy-duty motor on a powder-coated steel base which rests securely on top of a 55-gallon drum or 275-gallon tote. Equipped with chemical resistant pickup and mixing tubes and 25 feet of hose and brass wand and fittings. Quickly and uniformly applies concrete form release agents, tilt-up bondbreakers, curing compounds, floor sealers and low viscosity water repellent sealers.
Economical Handpump Sprayer
Perfect Form And Concrete Sprayer
Contractor Grade Handpump Sprayer
Equipped with a heavy-duty stainless steel tank, brass wand and trigger valve, a high-capacity, 100-mesh filter in the trigger valve, air pressure gauge, spare parts container and chemical resistant hose, seals and gaskets. Options include compressed air valve, pressure regulator on wand, wheeled cart and more. Uniformly applies concrete form release agents, tilt-up bondbreakers, curing compounds, floor sealers and other construction chemicals.
Pump Foamer
Handpump Foamer
Heavy-duty polypropylene tank and gun specifically designed to produce a rich foam that clings to veritcal surfaces. Maximizes performance of Blast-Off Concrete Buildup and Splatter Remover and other maintenance products.
Drum Mounted Power Sprayer
Mix Station
Combination Mix And Dilute Station For Super Concentrated Form Release Agents
Specifically designed to simultaneously mix and dilute NoxCrete super concentrated form release agents. Provides consistent, reliable dilution ratios and eliminates laborrelated mixing and diluting errors.
Parts and service for all Nox-Crete hand pump sprayers, power sprayers and mix stations are available directly from Nox-Crete.
Nox-Crete Products GrouP Omaha, NE • USA • www.nox-crete.com • (800) 669-2738 10
REV 12/2011