ÂŽ
NE CH W AIN Self-Supporting Capacity Diagram
Bright Zinc Plated Steel End Brackets
The maximum length of the self-supporting capacity or ) in admissible sagging ( LS 2 in relationship to the weight of the cables and hoses contained per linear metre.
The end brackets set allows the two ends of the chain to be attached to the equipment. Set complete with tiewrap clamps available on request.
H110PC Nylon chain with opening aluminium covers
200 150 100 60
20
3
10 8 6 4 3 2
Fig. A Chain fixed outside or inside the radius. (Fig A)
1 0
1
2
3
4
5
Max unsupported length (m)
6
7
8
9 10 11
145
LS LSa and 2 2
How to open the covers
78,5
Additional load (kg/m)
40
LS LS 2
35 F1
The area in the diagram considers the difference of weight between various widths of chain. Red for self-supporting chain, green for chain in admissible sagging. For applications with and weights not included in the diagram of self-supporting capacity, verify the possible use of support rollers (see page 30).
20
11
F2
60 20 100
Chain Type 110PC200 110PC250 110PC300 110PC350 110PC374 110PC429 110PC498
F1 mm 170 220 270 320 344 399 468
Chain Type 110PC200 110PC250 110PC300 110PC350 110PC374 110PC429 110PC498
F2 mm 162 212 262 312 336 391 460
Special Widths
F= C-30
Special Widths
F= C-38
Bright Zinc Plated Steel Type Part Numbers Complete Set Assembled Chain End Bracket type Set 110PC A110PC * KM ** Complete Set Unassembled Chain End Bracket type Set 110PC A110PC * K ** *Available on request in stainless steel ** 1=Pos.1; 2=Pos.2; 3=Pos.3 See mounting variations page 31
Easy opening of the pin junction. Allen key for the opening of the pin
10 mm
Tiewrap Clamp Part number Assembled SFCT110 *KMA Unassembled SFCT110 *KA * Inner width (C) Suitable to long travel distance.
For further information please consult Brevetti Stendalto’s Technical Office
125