Page 1

March 13-15, 2013 | Orlando, Florida

NISTM’s 2013 Conference and Trade Show Program Guide


INNOVATIVE PRODUCTS & SOLUTIONS for aboveground storage tanks PRODUCTS



IFR & EFR seal systems Floating roof drain systems Aluminum internal floating roofs GRE internal floating roofs Geodesic dome roofs Emissions reduction devices Flame arrestor / vent products

Tank repair & maintenance Tank inspection & calibration New tank construction Painting, coating & lining Tank engineering

Working capacity optimization Dead stock / heel reduction Emissions reduction Engineered safety In-service cycle optimization +1 (281) 681-7000

Headquarters: 24 Waterway Ave, Ste 400 The Woodlands, TX 77380 Locations worldwide 2

NISTM’s 2013 Conference and Trade Show Program Guide



NISTM 5th Annual Golf Tournament Thursday, March 12, 2013 1:00pm Shotgun Start


NISTM would like to thank everyone for attending the 15th Annual International Aboveground Storage Tank Conference & HOURS: Trade Show NISTM appreciates your CONFERENCE support and contribution to the show. Wednesday, March 13, 2013

EVERYONE WHO IS ATTENDING THIS SHOW IS AUTOMATICALLY 8:15am – 5:30pm REGISTERED AS A NISTM MEMBER FOR 2013 SCHEDULE OF EVENTS Conference Hours: Wednesday March 13, 2013 8:15am – 6:00pm Thursday March 14, 2013 8:30am – 5:30 pm Friday March 15, 2013 9:00am - 12:15pm


Trade Show Hours: Thursday, March 14, 2013 EPA SPCC & FRP Short Course Wednesday Tuesday, March 12, 2013 March 13, 2013 8:30am – 5:30pm 8:00am – 5:00pm 8:00am – 6:00pm Tank Fundamentals Thursday Friday, March 15, & 2013 Integrity Seminar March 14, 2013 Tuesday, March 12, 2013 8:00am – 3:15pm 8:30am – 12:15pm 8:30am – 4:30pm Welcome Reception: Shop Fabricated Tank Systems Tuesday TRADE SHOWMonday, HOURS: March 11, 2013 March 12, 2013 12:00pm – 6:00pm 8:30pm – 10:00pm Wednesday, March 13, 2013 Tuesday, March 12, 2013 Cocktail Mixer: 8:00am – 5:30pm 8:00am – 5:00pm Wednesday March 13, 2013 6:00pm Thursday, March 14, 2013 8:00am – 5:30pm

NISTM’s 2013 Conference and Trade Show Program Guide




Sponsors of the 15th Annual International Aboveground Storage Tank Conference & Trade Show

Visit us at www.hmtt


NISTM’s 2013 Conference and Trade Show Program Guide


EPA SPCC & FRP Short Course

Mark Howard, USEPA OEM-RPDD & Troy Swackhammer, USEPA OEM-RPDD

Wednesday, March 13, 2013 7:15 A.M.

Morning Breakfast

8:15 A.M.

Introduction Marshall Mott-Smith National Institute for Storage Tank Management

8:30 A.M.

SPCC Update and Review of Guidance Changes Mark Howard, EPA Oil Center

9:15 A.M.

FRP Overview Troy Swackhammer, USEPA OEM-RPDD

10:00 A.M.

Mid-Morning Break Sponsored by ArcelorMittal Industeel

11:00 A.M.

North America Upstream Dynamics and Downstream Implications Sam Davis, Wood MacKenzie

11:45 A.M.

API Standards Update Steve Crimaudo, API

12:15 P.M.

Lunch Sponsored by ATEC Steel & Hansa Consult of North America

1:15 P.M.

Pipeline Safety and Damage Prevention Arthur Buff, U.S. Department of Transportation, Pipeline and Hazardous Materials Safety Administration

1:45 P.M.

Evaluation of Caribbean Petroleum Tank Overfill Event, October, 2011 Vidisha Parasram, Director of Incident Screening and Selection, USCSB

2:30 P.M.

Afternoon Break Sponsored by Vertex Energy

4:00 P.M.

Second Term Strategy – What Lies Ahead? Jane Besch, Vopak

4:30 P.M.

Dome Retrofit Considerations - Three Business Cases Jeff Eickhoff, HMT Inc.

5:00 P.M.

Major New Aviation Construction Project at Anchorage Lessons Learned Grant Smith, Burns & McDonnell and Weston Bennett, ASIG

5:30 P.M.

Managing AST Internal Inspections Phil Myers, PEMY Consulting

6:00 P.M.

Cocktail Mixer Sponsored by Fisher Tank Company, Pipe Products and Pond & Company

NISTM’s 2013 Conference and Trade Show Program Guide




Risk Based Environmental Auditing of Bulk Fuel Terminals Douglas Hileman, Douglas Hileman Consulting LLC and Andy McClish, TransMontaigne

9:15 A.M.

A Primer on Steel Manufacture and the Differences Between Hot Roll Coil and Discrete Plate Products Thomas Perry,



Update of the EPA’s “Uniform Tank Emissions Standards”

Contained Tank Floor CP - Why Did My System Stop Working and What Do I Do Now?

Military Aviation Fuel Storage Tanks

Application of New Technology in Tank Integrity Management

Combined Aviation Specification Overview

Beatriz Cardona & Maria Anker, Sage Environmental

How to Incorporate FRP into SPCC Plans Joyce Rizzo, JD2 Environmental

Craig Meier, Corrosion Control

Dean Flessas, Pond & Company, Inc.

AVIATION Michael Zapata, P.E., Air Force Civil Engineer Support Agency

Steve Barker, Airlines for America

ArcelorMittal USA

10:00 A.M.

Morning Break Sponsored by Vacono America LLC

11:15 A.M.

Best Practices for Installing New Radar Tank Gauging

11:45 A.M.

12:30 P.M.

Johan Sandberg, Emerson Process Management

Controlling Lightning and Static Ignitions in Tanks Bruce Kaiser, Lightning Master

How A Terminal Operator Can Effectively Manage Inventory Reconciliation and Stock Loss Joe Lovan, Aloha Petroleum

2:00 P.M.

Case Study: Developing a Tank Level Setting Process Barbara E. Laskey, Marathon Pipe Line LLC

2:30 P.M.

Afternoon Break

3:30 P.M.

Dealing with Geotechnical Challenges at Tank Sites Mark Plaskett, Hayward Baker Inc.

Fitness For Service Hydro Test Exemption Methods

4:00 P.M.


Rick Chapman, Innospec Fuel Specialties

Isobutanol – How Will it Affect your Terminal Operations James Baustian, Butamax

A New Risk Based Inspection (RBI) Method for Aboveground Storage Tanks Joe Maresca, Vista Precision Solutions, Inc.

Recommended Practice for Small Airport Fuel Storage and Handling Steve Thickstun, Advanced Fuel Systems

Understanding Structured Light 3D Technology for Use in Pipeline Defect Analysis

Design Considerations for Large Airport Fueling Systems



Vincent Summa Techcorr USA Ltd.

Ken Bilson, Pond & Company, Inc.


1:30 P.M.

Biofuels, Standard Specification and Emerging Industry Issues

Kah Kan Chan, TCI Services, Inc.

4:45 P.M.

Surviving a Fuel Storage Facility Fire

5:30 P.M.


Paul Calderwood, Calderwood Consulting International


Membrane Technology Reduces Hydrocarbon Vapors in Air Without Flaring or Activated Carbon Ted Tiberi,

How One Major Refinery Does Risk-Based Inspection of their ASTs

Open Discussion on Common Violations in the Field

New API Standard on Lightning Protection for ASTs

Arid Technologies Inc.


Ben Sloan, Chevron Corporation

George Morovich , Tank and Environmental Technologies

The Consequences of Complacency – Preventing Problems with Shop-Fabricated ASTs John Cignatta, Datanet Engineering, Inc.

Innovative Solutions for Piping for ShopFabricated Aboveground Storage Tank Systems Steve Tretter, Priority Sales Associates, Inc.

An Integrated Approach to Asset Integrity Management of Plants and Terminals

API Floating Roofs

Smart Tank Farm Leak Detection Monitoring and Communication

How One Major Terminaling Company Manages Corrosion of their Tank Assets

Storage Tank Mishaps

Vapor Corrosion Inhibitors – What are they and how can they protect my tanks? Kelly Baker, Zerust

Tank Cleaning Strategies

Rama K. Challa, Ph.D., PE Matrix Service Company

Mark Baker, Baker Consulting Group

Sebastian Ruik Beyhaut, ROSEN Integrity Solutions

Caryn Cullen, GE Power & Water Technologies Analytical Instruments

Storage Tank Degassing with Zero Emissions W. Bryant Hickman, P.E., McGuffy Energy Services LP

NISTM’s 2013 Conference and Trade Show Program Guide

API Changes Standards for Safe Tank Cleaning and Entry

Wayne Geyer & Dana Schmidt Steel Tank Institute

Chris Commander, Oil Tanking

Ted Green, Refuel Environmental Services Inc.

NISTM’s 2013 Conference and Trade Show Program Guide





How Make Sure Tank Internal Coating Conditions Optimal – All Year Long

Mixing in Crude Oil Storage Tanks for Improved Tank Operations and Limiting Tank Failure Risk Christopher Hastings, Philadelphia Mixing Solutions, Ltd.

9:30 A.M.

Managing Terminal Real Estate Transactions and Liabilities Rob Stillwell, SIOR,

Do Tank Safeguards Really Reduce Risk?

10:00 A.M.

Reduction of VOC Emissions by Using P/V Valves and Floating Roofs with Rim Seals

Marine Terminal Information System

10:30 A.M.

Morning Break Sponsored by Jensen Mixers International

10:45 A.M.

Third Party Compliance, Conformance, and Industry Standard Audits Do Benefits Exceed Costs?

9:00 A.M.

Russ Brown, Polygon U.S. Corporation

CCIM, Newmark, Grubb, Knight, & Frank

Peter Szalata, TÜV SÜD Industrie Service GmbH

Clement Mesavage, Antea Group

11:15 A.M.

Risk Based Management of ASTs

Doug Mann, Vista Precision Solutions, Inc.

11:45 A.M.

Maintaining Diesel Fuel Quality…Strategies for Ensuring Clean Fuel Availability When You Need It Dan Bigelo, Reverso Pumps, Inc.

12:15 P.M.


Mauricio Olivares & Milea Cosby, Pinnacle Asset Integrity Services

Zoe Wilson, Oil Companies International Marine Forum

Unmanned Tank Cleaning: Technologically and Economically Feasible or Still a Dream?


9:00 A.M.

9:45 A.M.

10:45 A.M.

AST Standards and Trends Wayne Geyer, Steel Tank Institute

STI SP001 Revisions and Finer Points Dana Schmidt, Steel Tank Institute

AST Inspector Experiences Alex Ralston, Petcon, Inc.

Bill Sutor, Vacuum Solutions

What to Expect from an AST Compliance Inspection

John Albert, Program Administrator, Missouri No Substitute for Safety 11:15 A.M. Department of Thorsten Schaper, Braunschweiger Flammenfilter Agriculture, Division of GmbH Weights and Measures

Bonding and Grounding in Terminal Facilities Richard Puig, Newson-Gale

11:45 A.M.

Integrity Management is More than Just an Inspection Dean Flessas, Pond & Company, Inc.

WELCOME RECEPTION March 12, 2013 at 8:30pm Participate in this annual event where everyone in the industry has the opportunity to network and meet new contacts. This Welcome Reception is a great start leading to the upcoming conference and tradeshow. Come and enjoy the company, food and drinks! Sponsored by: ATEC Steel and Vista Precision Solutions, Inc.


NISTM’s 2013 Conference and Trade Show Program Guide

A business relationship must rely on trust and mutual respect built through proven results. Vacono has acquired thousands of proven references worldwide over the decades with satisfied repeat customers.

- Aluminum Floating Roofs / Decks - Aluminum Geodesic Dome Roofs - Additional Storage Tank Products Visit us at

SPCC Update and Review of Guidance Changes Morning Session 8:00am - 12:00pm The purpose of the Spill Prevention, Control, and Countermeasure (SPCC) rule is to help facilities prevent a discharge of oil into navigable waters or adjoining shorelines. This rule is part of the U.S. Environmental Protection Agency’s oil spill prevention program and was published under the authority of Section 311(j)(1) (C) of the Federal Water Pollution Control Act (Clean Water Act) in 1974. The rule may be found at Title 40, Code of Federal Regulations, Part 112. A facility is covered by the SPCC rule if it has an aggregate aboveground oil storage capacity greater than 1,320 U.S. gallons or a completely buried storage capacity greater than 42,000 U.S. gallons and there is a reasonable expectation of an oil discharge into or upon navigable waters of the U.S. or adjoining shorelines.

FRP Overview Afternoon Session 1:00pm to 5:00pm In 1994, EPA finalized the Facility Response Plan regulation at 40 CFR Part 112.20 and 112.21. Promulgated under the authority of the Oil Pollution Act of 1990, the regulation requires certain facilities that pose the risk of substantial harm to the environment to prepare plans to respond to a worst case discharge of oil. FRP-regulated facilities must develop and submit a plan to their EPA Regional Administrator. EPA reviews and approves FRPs for certain facilities that have the potential to cause significant and substantial harm. There are over 4,400 FRP plan holders in the U.S.

NISTM’s 2013 Conference and Trade Show Program Guide


NISTM 2013 EXHIBITORS A. R. Watson #330 ABUTEC LLC #507 Allentech, Inc. #115 Alliance Tank Service #610 Allstate Power Vac #229 All-Tex Industrial - Tank Liners #506 Amcorr Products & Services, Inc. #624 American Heating Company #111 Antea Group #407 Applied Technical Services #607 Applus RTD #405 ArcelorMittal Industeel #630 SPONSOR ARID Technologies, Inc. #509 ATEC Steel, LLC #105 SPONSOR Baker Hughes Process and Pipeline Services #423 Baker Tank Company/Altech #106 Bass Engineering Company #129 BIC Alliance #609 Blair Rubber Company/Marseal #312 Brand Energy & Infrastructure Services #323 Brown-Minneapolis Tank (BMT) #411 Caldwell Tanks, Inc. #224 CATSI, Inc. #625 Champaign Asphalt #623 Chemical Containers #620 Cherry Demolition, Inc. #619 Cinatra Clean Technologies Inc. #512 CL Coatings #329 Consolidated Fabrication & Constructors, Inc. #200 Corrosion Control Incorporated #214 SPONSOR Corrpro Companies, Inc. #118 Cortec Corporation #231 CST Covers #513 D3 Technologies #531 DEHN, Inc. #508 Denso North America #414 DJA Inspections Services, Inc. #225 Don Miller & Associates, Inc. #104 ECO-Tank Systems, LLC. #628 Enardo, LLC. #305 Endress+Hauser #425 Envent Corporation #501 ErectraStep, LLC. #516 Ergon Armor Novocoat #210 FabEnCo, Inc. #602 Falcon Technologies #503 FHG, INC. #413 Fisher Tank Company #114 SPONSOR Forge Tech Inc. #527 FOX-TEK Canada Inc. #613 GE Analytical Instuments #431 GEM Mobile Treatment Services #511 General Combustion Corp #510 General Industries, Inc. #523

Glasgow Equipment Services Inc. #604 Groth Corporation #131 Hall Tank Company, LLC #600 Hammonds Fuel Additives, Inc. #402 Hansa Consult of North America LLC. #215 SPONSOR Hayward Baker, Inc. #221 Heatec, Inc. #526 HMT Inc. #300 SPONSOR Houston Polytank LLC #616 Industrial Heater #128 Industrial Maintenance Group, Inc. #217 Insultherm, Inc. #213 International Paint LLC #422 International Tank Service, Inc. #415 SPONSOR Intertek #618 J.J. White Inc. #127 Jensen Mixers International #412 SPONSOR John Zink Company LLC #313 Jordan Technologies, Inc. #321 Kelley Construction, Inc. #102 L&J Technologies #322 Lightning Master Corporation #420 Lotus Mixers #529 LUDECA, Inc. #525 Magnetrol International #429 Mascoat #530 Mass Technology Corporation #125 Matrix Service #418 Menard #130 Mesa #113 MFE Enterprises, Inc. #320 Micropack Detection #427 Midwest Steel Co, Inc. #406 MISTRAS Group #315 Modern Welding Company of Florida #324 Morrison Bros. Co. #615 Mott-Smith Consulting, Inc. #628 MPC Containment International #222 North American Industrial Services #611 NTIC/Zerust #328 OMNTEC Mfg. Inc. #126 Paratherm Heat Transfer Fluids #132 PCA Engineering, Inc. #403 PD-Logistics #528 PECOFacet #612 PEMY Consulting #628 Pentair Thermal Management #519 PetroChem Inspection Services, Inc. #307 Petrotech Southeast, Inc. #318 Philadelphia Mixing Solutions, Ltd. #211 PinnacleAIS #326 Pipe Products #108 SPONSOR Pittsburg Tank & Tower Co, Inc. #134 PLS Construction, Inc. #202

10 NISTM’s 2013 Conference and Trade Show Program Guide

Polystar Containment #426 Pond & Company #100 SPONSOR Praxair Services, Inc. #120 Premier Corrosion Protection Services, Inc. #608 Prime Engineering #325 ProAct Services Corporation #505 Protectoseal Company #404 PROTEGO USA, Inc. #408 Quest Integrity Group, LLC. #226 Raven Industries #617 River Consulting #500 RMF #309 Rosemount Tank Gauging #310 ROSEN USA #206 SPONSOR Schneider Electric #112 Schroeder Environmental Cleaning Services, Inc. #228 Seaman Corporation #123 Slick Sleuth/InterOcean Systems #603 Smith Tank & Steel, Inc. #303 Solares Florida Corporation #311 Solidification Products Int’l Inc. #327 Southwest Specialty Coatings, Inc. #621 Storage Tank Products #521 Summit Environmental Services #428 Sumter Transport Company #522 Superior Tank Company Inc. #504 T F Warren/TARSCO #514 Tampa Tank Inc. #319 Tank Builders, Inc. #502 Tank Engineering and Management Consultants Inc. #317 Tank Storage Magazine #622 TankLink, a Division of Telular Corporation #230 TCI Services, Inc. (Tank Consultants, Inc.) #103 TEAM Industrial Services #227 Tec Serv LLC #204 SPONSOR TechnoSoft Inc #524 The Cooley Group #410 The Equity Engineering Group, Inc. #424 TKDA #212 Trelleborg Offshore #614 Trimble #401 TUV Rheinland Industrial Solutions #605 U.S. Tank Protectors, Inc. #219 Ultimate Linings #601 Vacono America LLC #122 Valve Concepts #223 Veolia ES Industrial Services, Inc. #331 Vertex Energy #409 SPONSOR Vista Precision Solutions, Inc. #107 SPONSOR Willbros Downstream - Tank Services #430 Williamette Valley Company #606




630 531

530 431

430 331

330 231

230 131



628 529

528 429

428 329

328 229

228 129



626 527

526 427

426 327

326 227

226 127



624 525

524 425

424 325

324 225

224 125


622 523

522 423

422 323

322 223

222 123


620 521

420 321

320 221




318 219





Gatlin Ballroom



122 519



Food Service





414 315

512 413


513 313


610 511

510 411

410 311


608 509

508 409

408 309


606 507

506 407

406 307


604 505

504 405

404 305


602 503

502 403

600 501

500 401


115 120 118

Food Service

514 415


Food Service




312 213


310 211

210 111

113 112

108 206 107 204 105


202 103






Food Service

402 303


ADDITIONAL CONFERENCE AND TRADE SHOW SPONSORS: Conference & Trade Show Program Brochure Sponsored by HMT Inc. Golf Tournament Title Sponsored by HMT Inc. Internet Café and Audio Visual Sponsored by Corrosion Control, Inc. Conference Attendee Bag Sponsored by ROSEN USA Badge Lanyard Sponsored by Tec Serv LLC Popcorn Cart Sponsored by International Tank Service

NISTM’s 2013 Conference and Trade Show Program Guide 11



NISTM offering for the first time this course taught by industry authority Philip Myers of PEMY Consulting. This comprehensive course is aimed at engineers, inspectors, regulator, administrators and managers responsible for storage tank facilities who wish to improve their overall knowledge and understanding of these facilities in the petroleum, chemical, aviation and paper and pulp industries. The course is divided into two major parts. Part 1 Tank Fundamentals Morning Session 8:30am – 12:00pm Covers the fundamentals of storage, tanks and storage problems including the design and construction of tanks. It will review API Standards API 2610, API 650, API 651, API 652, API 620 and API 625 . We will address how and why various tank options and designs are used in the context of different situations. Part 1 will build the fundamentals so that we can move into the tank facility management issues of Part 2.

Part 2 Tank Integrity Afternoon Session 1:00pm – 4:30pm The focus of this segment is on the mechanical and operational integrity of storage tank facilities. We will review the concept of management systems in the quest to minimize tank facility risk. Specifically we will review industry standards API 2610, API 653, API 575, ASCE7 and NFPA 30. Topics will include best practices for operating terminal and tank facilities, the failure modes and effects of storage tanks, mechanical integrity through tank inspection programs, spill prevention through overfill protection, dealing with dangerous load conditions resulting from wind, snow, seismic, settlement, flooding and how to minimize risk and a general program to comprehensively reduce risks.

• • • • •

• • • •

Tank Selection, Sizing, Layout Indoor, Outdoor and Vaults Codes/Regs/ Compliance Over fill Control that Works Piping/Valving Issues

Venting Design Problems Monitoring/Testing Protocols Installation Difficulties Spill Plan Issues

John V. Cignatta, PhD, PE is President and Principal engineer of Datanet Engineering, Inc., a consulting firm specializing in the areas of fuel systems and corrosion engineering. He has presented numerous seminars on AST and UST installation, cathodic protection and corrosion prevention. In addition, John is an API certified tank inspector per API 653 and a STI certified tank inspector per SP-001 as well as a NACE Corrosion Specialist and Level II NDT Engineer for ultrasonic thickness testing.

Monday, March 11, 2013 | 12:00pm – 6:00pm Tuesday, March 12, 2013 | 8:00am – 5:00pm 12 NISTM’s 2013 Conference and Trade Show Program Guide

NISTM’s 2013 Conference and Trade Show Program Guide 13



A. R. WATSON Booth #330 4016 E Maryland Street Bellington, WA 98226 Phone: (360) 734-9157 Fax: (360) 752-1779 For over 30 years A.R. Watson Inc. has been a worldwide leader in lifting large aboveground storage tanks using airbags to allow access for tank foundation reconstruction, installation of a secondary containment and tank relocation. ABUTEC LLC Booth #507 2959 Cherokee St, Ste 101 Kennesaw, GA 30144 Phone: (770) 710-4904 Fax: (770) 499-7455 ABUTEC, an acronym for Advanced Burner Technologies, is an interna-

tional supplier and U.S. manufacturer of environmentally friendly combustion solutions. ABUTEC offers high efficiency, low emission burners and flares to various industry segments, specializing in Oil & Gas, Biogas and Wastewater Treatment. ABUTEC manufactures Infrared Burners, Enclosed Flares, Vapor Combustors, Incinerators, and Thermal Oxidizers systems all aimed at reducing plant emissions and increasing efficiency.

ers for oil refineries and storage terminals. ALLIANCE TANK SERVICE Booth #610 613 N Euchee Valley Road Cushing, OK 74023 Phone: (918) 225-1010 Fax: (918) 225-1012

ALLENTECH, INC. Booth #115 6350 Hedgewood Drive, Suite 100 Allentown, PA 18106 Phone: (484) 664-7887 Fax: (484) 664-7046

Alliance Tank Service, LLC offers a broad range of products and services. Included is new tank erection, ranging in sizes from 200 barrels (API 12F) to well over 4,000,000 gallons (API 650 & AWWA). Other services included are interior liners, tank demolition and removal, tank repair, project management, and API 653 inspections.

ALLENTECH designs, manufactures & installs Aluminum Internal Floating Roofs and Perimeter Seals for above ground petrochemical storage tanks and, Floating Oil Water Separator Cov-

ALLSTATE POWER VAC Booth #229 928 E Hazelwood Avenue Rahway, NJ 07065 Phone: (732) 815-0220


▶ Engineering ▶ Tank Management ▶ Fitness for Service ▶ RBI Evaluations

▶ Seal Inspections ▶ Dye Penetrate Testing of Floating Roofs ▶ SPCC Plans ▶ STI Tank Inspections ▶ Helium Leak Testing

MISSION STATEMENT “It is the mission of DJA Inspection Services, Inc to safely provide full service tank inspections to the storage tank industry, to be known for safety as well as for quality and detailed inspections through the dedication and experience of our team and to provide the service worldwide as well as to the individual tank owner.”

Tampa, FL: (813) 235-9110 Reno, PA: (814) 676-3663 Bakersfield, CA: (661) 363-5453

14 NISTM’s 2013 Conference and Trade Show Program Guide

15TH ANNUAL INTERNATIONAL ABOVEGROUND STORAGE TANK CONFERENCE & TRADE SHOW Fax: (732) 815-9892 Allstate Power Vac, founded in 1984 is a full service environmental / industrial cleaning and waste management company. Specializing in industrial maintenance, tank & oil processing; high pressure water blasting; 24-hour emergency spill response; remediation & chemical services; TV inspection & pipe lining; and transportation & disposal. ALL-TEX INDUSTRIAL - TANK LINERS Booth #506 4020 Las Palmas Galveston, TX 77554 Phone: (713) 828-1639 Fax: (832) 201-7694 All-Tex Industrial Tank Liners LLC specializes in the supply and installation of geosynthetic linings used for liquid and solid waste containment, leak collection, and primary and secondary containment. All-Tex also offers HDPE pipe and specialty fabrication products. AMCORR PRODUCTS & SERVICES, INC. Booth #624 8000 IH-10 West #600 San Antonio, TX 73230 Phone: (210) 524-7737 Fax: (210) 524-7732 Manufactures VISCOTAQ®, viscouselastic coatings and sealants for corrosion protection & waterproofing. VISCOTAQ® products are applied without primer, require minimal surface preparation and form a homologue, self-healing protective coating. VISCOTAQ® products excel at protecting tank chimes, waterproofing casing & vaults, soil-to-air and coating transitions, girth welds, flanges, plus numerous other applications.

AMERICAN HEATING COMPANY Booth #111 1200 Route 46 Clifton, NJ 07013 Phone: (973) 777-0100 Fax: (973) 777-4693 The American Heating Company specializes in heating solutions for tank terminals industry as well as a variety of other applications. AHC provides engineered equipment including hot oil heaters, exchangers, tank coils, and steam generators. AHC is considered the single source for tank heating. ANTEA GROUP Booth #407 5910 Rice Creek Pkwy, Suite 100 St. Paul, MN 55126 Phone: (651) 697-5166 Fax: (651) 639-9497 Antea Group is an international engineering and environmental consulting firm specializing in auditing and compliance services, incident management, remediation, operating procedures, and EHS benchmarking services for the midstream petroleum industry. Antea Group will be speaking on midstream auditing at this year’s NISTM conference.


Explosion Investigations, and Calibration Services. APPLUS RTD Booth #405 11801 S Sam Houston Pkwy W Houston, TX 77031 Phone: (832) 295-5000 Fax: (832) 295-5001 Applus RTD is a global leader in Non Destructive Testing and Inspection that provides highly trained specialists that deliver technically advanced solutions for compliance and quality testing through to integrity management, for onshore and offshore installations. ARCELORMITTAL INDUSTEEL SPONSOR Booth #630 Box 1117 Enfield, CT 06083 Phone: (860) 985-8430 Fax: (860) 668-1930 Industeel, an ArcelorMittal Group company produces steel plates in specialty carbon, low alloy, stainless (duplex, austenitic, ferritic, martensitic, super duplex and super austenitic grades), roll bond clad and nickel alloys. Our 50-person research facility is dedicated to alloy development and application technology.

APPLIED TECHNICAL SERVICES Booth #607 2108 Sam Houston Ave Liberty, TX 77575 Phone: (936) 336-2208 Fax: (936) 336-2230

ARID TECHNOLOGIES, INC. Booth #509 323 S Hale Street Wheaton, IL 60187 Phone: (630) 681-8500 Fax: (630) 681-8505

ATS is a consulting engineering firm with extensive testing and inspection capabilities. Since our founding in 1967, we have established a reputation with business, industry, and the legal profession for successfully uncovering facts in Metallurgy and Materials Testing, Chemical Analysis, Non-destructive Testing, Forensic and Consulting Engineering, Fire and

ARID’s CRU (Carbon Retrofit Unit) vapor recovery system reduces hydrocarbon emissions while allowing for the increase of loading-rack transfer rates at bulk gasoline terminals. Another product, On-Spot Railcar filling system is capable of loading 300,000 bbl./day of liquid products – comparable to pipeline transfer rates but is more economical and mobile.

NISTM’s 2013 Conference and Trade Show Program Guide 15



ATEC STEEL, LLC SPONSOR Booth #105 1000 W 5th Street Baxter Springs, KS 66713 Phone: (877) 457-5352 Fax: (620) 856-5197

BASS ENGINEERING COMPANY Booth #129 3200 Brent Road Longview, TX 75604 Phone: (903) 759-1633 Fax: (903) 759-7504

ATEC Steel is a full service industrial contractor specializing in API 650 aboveground storage tanks new construction. Additional services associated with above ground storage tanks including tank foundations, piping and painting is also provided. We are also a ASME pressure vessel supplier with the capabilities to provide shop fabricated tanks, skids, piping assemblies/spools and specialty steel fabrication.

Bass Engineering is a provider of cathodic protection (CP) services including engineering/design, installation, maintenance, annual inspections of CP systems and material sales. Our staff is NACE certified with training and experience to assist our customers in choosing the most effective application of cathodic protection technology.

BAKER HUGHES PROCESS AND PIPELINE SERVICES Booth #423 8008 Truck World Blvd Hubbard, OH 44425 Phone: (330) 534-5607 Fax: (330) 534-5670 Baker Hughes Process and Pipeline Services is a Global supplier of industrial services to the hydrocarbon production, processing, pipeline, and petrochemical industries. Our services include but are not limited to lube oil flushing, tank cleaning, unit decontamination, nitrogen pumping, and pipeline cleaning. BAKER TANK COMPANY/ ALTECH Booth #106 PO Box 40 Arp, TX 75750 Phone: (800) 527-8435 Fax: (903) 859-4191 Baker Tank Company/Altech - Superior Technology in the Petroleum and Chemical Industry since 1935.

BIC ALLIANCE Booth #609 381 Columbia Memorial Pkwy League City, TX 77573 Phone: (281) 538-9996 Fax: (281) 538-9991 Since 1984, BIC Alliance, BIC Recruiting and its sister companies — IVS Investment Banking and BIC Publishing — have earned a reputation as a primary communication link for connecting buyers and suppliers in business and industry with one another. BLAIR RUBBER COMPANY/ MARSEAL Booth #312 5020 Panther Parkway Seville, OH 44273 Phone: (330) 769-4073 Fax: (330) 769-4153 Blair Rubber Company of Seville, OH manufactures and markets MARSEAL Corrosion Resistant Linings to protect secondary containment areas around storage tanks from attack by corrosive/reactive liquids. Installed as a bonded “bathtub”, MARSEAL will not crack when concrete cracks or moves and is virtually unaffected by UV radiation. (ITALICIZE MARSEAL)

16 NISTM’s 2013 Conference and Trade Show Program Guide

BRAND ENERGY & INFRASTRUCTURE SERVICES Booth #323 1325 Cobb Int. Dr., Ste. A-1 Kennesaw, GA 30152 Phone: (678) 285-1400 Fax: (770) 514-0285 Brand Energy & Infrastructure Services is the leading diversified provider of specialty services to North America’s energy markets. Its extensive portfolio of service offerings include work access, coatings, insulation, cathodic protection, tank maintenance, refractory, abatement, fireproofing, field machining, CUI management and other related crafts. Brand operates in four key energy sectors: refining, Canadian Oil Sands, petrochemical and power generation. BROWN-MINNEAPOLIS TANK (BMT) Booth #411 8301 Broadway Blvd SE Alburque, NM 87105 Phone: (505) 563-4553 Fax: (505) 563-4799 Brown-Minneapolis Tank Co. (BMT) and its affiliates, BMT-NW and Graver Tank Co., have been recognized leaders in supplying large field erected/ shop built tanks, fabricated metal products, and related structures for petrochemicals, water, gas, biofuels, misc. other liquids, dry chemical products as well as dry bulk materials. BMT has fabrication shops located in Albuquerque NM, Olympia WA, Toledo OH, Ponoka Canada. BMT is authorized or Licensed in all 50 states and Canada to design, fabricate and install steel storage tanks meeting EPA standards and conforming to all industry standards such as API, AWWA, ASME and other design and manufacturing codes, (UL,SWRI, AWS, FM, STI, NFPA, NSF,TEMA).

15TH ANNUAL INTERNATIONAL ABOVEGROUND STORAGE TANK CONFERENCE & TRADE SHOW CALDWELL TANKS, INC. Booth #224 4000 Tower Road Louisville, KY 40219 Phone: (502) 964-3361 Fax: (502) 966-8732

CATSI, INC. Booth #625 135 Dowlin Forge Road Exton, PA 19341 Phone: (610) 423-4602 Fax: (610) 423-4610

Caldwell is a premier fabricator and erector of welded steel, concrete and bolted tanks and vessels. Licensed to work in 48 states and with Registered Engineers in 46 states, Caldwell travels all over the U.S. building projects. Caldwell is a leading supplier of field-erected storage tanks serving the water, petroleum, chemical, power and industrial markets and meets all codes for API, AWWA and ASME for our projects. Caldwell engineers, fabricates and constructs field erected ASME carbon and stainless steel pressure vessels. Caldwell has been providing continuous service for over 125 years.  

For over 30 years, CATSI has been providing Site Construction Inspection Services for the Pipeline and Terminal Industry. Our range of project supervision has encompassed tank cleaning, inspection, repair/construction, various mechanical installations, pipeline upgrades, electrical/instrumentation upgrades and Ethanol initiatives. CHEMICAL CONTAINERS Booth #620 413 ABC Road Lake Wales, FL 33859 Phone: (863) 638-1407 Fax: (863) 638-1863


Chemical Containers Inc. is a specialist in liquid handling products. We are the largest and most diverse manufacturer, fabricator and distributor of poly tanks and sprayers in the United States. Since 1983 we have dedicated our business to providing the industry’s highest quality containment and application equipment in support of the agriculture, forestry, aquatic, turf and pest control business. Our customer commitment is to deliver a finished product on time by the most qualified personnel available as promised. CHERRY DEMOLITION, INC. Booth # 619 6131 Selinksy Houston, TX 77048 Phone: (713) 987-0000 Fax: (713) 987-0629 Cherry Demolition, Inc. specializes in

In todays’s market, ATEC Steel commands some significant advantages over other suppliers: Flat bottom storage up to 600,000 barrels / 25,000,000 gallons In-house specialized coating applications Precision manufacturing tolerances Unmatched fabrication quality - QA System certified Modular construction - minimized large piece count Company profile - the experienced TEAM in field-weld components Prompt quotations tailored for your application Reliable performance on every project On-time delivery & project completion Direct factory field installation crews Genuine customer service

ATEC Specialties include:

ATEC Steel is an industry leader in field-weld tank construction an specialty steel fabrication. Our facility offers precision fabrication, utilizing the latest state-of-theart equipment. We provide fabrication that meets the stringent requirements of API, AWWA, ASME, AISC and other specified codes

Liquid flat bottom tanks Floating roof tanks Reservoirs Open top tanks Standpipes Dry bulk hopper tanks

Digestors Umbrella roof tanks Sloped / shovel bottom tanks Foundation installation Field applied coating applications

NISTM’s 2013 Conference and Trade Show Program Guide 17



dismantling and demolishing entire plants, process units, partial units, tanks or individual pieces of process equipment. CINATRA CLEAN TECHNOLOGIES INC. Booth #512 11931 Wickchester, Suite 103 Houston, TX 77043 Phone: (713) 351-0707 Fax: (281) 496-3333 Cinatra Clean Technologies Inc. provides its Quantum Leap℠ non-manned entry tank cleaning services to the refining and pipeline industries. Dramatic results for tanks with hydrocarbon sludge: 50+% reduced schedule, 98+% oil recovery, with minimum risk. Cinatra is the exclusive licensor of Oreco’s BLABO™ technology in the U.S. and Canada.

CL COATINGS Booth #329 8450 W 191st Street, Unit 19 Mokena, IL 60448 Phone: (815) 464-3053 Fax: (815) 464-3060 CL Coatings is a full service Industrial Painting Contractor, with over 90+ office locations. CL Coatings – specializes in the application of highperformance coatings throughout the petrochemical, pharmaceutical, power, refining, marine, and manufacturing, transportation and commercial construction industries. CL Coatings provides industrial painting, fireproofing and specialty coating services throughout the United State, headquartered located in Mokena, Ill. and Lakeland, Fla. CONSOLIDATED FABRICATION & CONSTRUCTORS, INC. Booth #200

3851 Ellsworth Street Gary, IN 46408 Phone: (219) 884-6150 Fax: (219) 884-6652 Consolidated Fabrication & Constructors, Inc. Mechanical Contractor serving the needs of the Nation’s leading Petrochemical Companies. Specializing in Above Ground Storage Tank Repair, New Tank Design and Construction, Pipeline Maintenance and Systems, Refinery and Terminal Piping, and Pressure Vessels. CORROSION CONTROL INCORPORATED SPONSOR Booth #214 494 Fairplay St. Rutledge, GA 30663 Phone: (706) 557-9624 Fax: (706) 557-7923 Corrosion Control Incorporated is a

Corrosion Control Incorporated is a professional engineering and service company devoted to the fields of corrosion monitoring and control. Our engineers each have more than 25 years of practical hands on experience in the fields of corrosion engineering, cathodic protection, coatings and mechanical inspection. The cathodic protection related services offered include design, testing, troubleshooting, repair and installation of new systems. Related areas of expertise include corrosion failure analysis, mechanical integrity inspection of pipe, external corrosion direct assessment (ECDA) and above grade compliance evaluations relating to corrosion control. Corrosion Control Incorporated is a Woman Owned Small Business registered with the Women’s Business Enterprise National Council.

18 NISTM’s 2013 Conference and Trade Show Program Guide

15TH ANNUAL INTERNATIONAL ABOVEGROUND STORAGE TANK CONFERENCE & TRADE SHOW professional engineering and service company devoted to the field of corrosion monitoring and control. The cathodic protection related services offered include design, testing, troubleshooting, repair and installation of new systems. Our firm is registered as a Woman Owned Small Business with Central Contractor Registration and with the Women’s Business Enterprise National Council. CORRPRO COMPANIES, INC. Booth #118 581 Sigman Road, Ste 300 Conyers, GA 30013 Phone: (770) 761-5400 Fax: (770) 761-5405 For over thirty years, Corrpro has remained the leading provider of cathodic protection services for ASTS. With facilities located throughout the US, Corrpro has the ability to address your corrosion control requirements. CORTEC CORPORATION Booth #231 4119 White Bear Pkwy St. Paul, MN 55110 Phone: (651) 429-1100 Fax: (651) 429-1122 Cortec® Corporation is a global leader in corrosion protection technologies. Headquartered in St. Paul, Minnesota; Cortec® manufactures environmentally friendly, Vapor phase Corrosion Inhibitor (VpCI®) & Migratory Corrosion Inhibitor (MCI®) technologies. Cortec® has over 400 products serving Construction, Packaging, Metalworking, Electronics, Water Treatment, Oil & Gas and other industries. CST COVERS Booth #513 498 N Loop 336 E Conroe, TX 77301 Phone: (936) 539-1747 Fax: (936) 539-5355 CST Covers, formerly Temcor/Conservatek, is the recognized leader in the


design, manufacture and construction of aluminum domes. CST Covers has supplied over 16,000 covers in more than 90 different countries worldwide. CST designs innovative clear-span aluminum domes for storage tanks that help reduce hazardous vapor emissions and prevent water intrusion. Come by booth #513 and see the new OptiDome flush batten aluminum geodesic dome.   D3 TECHNOLOGIES Booth #531 4600 W Kearney, Ste 100 Springfield, MO 65803 Phone: (417) 831-7171 Fax: (877) 731-7575

Denso North America Inc., a subsidiary of Winn & Coales International, has been providing corrosion protection for over 80 years to a multitude of industries from oil & gas to marine corrosion protection. Denso now offers corrosion prevention to tank bases and chimes with its proven petrolatum tape system.

Engineering and Design Technology Consultants focused on manufactures. We help our clients assess the people, workflows, processes & technology within their company and then apply our expertise to help them work smarter and faster. Quote Automation, Design Automation and Workflow Automation are just a few of our specialties.

DJA Inspection Services, Inc. specializes in the inspection of aboveground storage tanks in accordance with the American Petroleum Institute Standard 653. The services are dependable, judicious, and affordable. DJA has been providing services to tank owners since 1990.

DEHN, INC. Booth #508 851 S. Kings Highway Fort Pierce, FL 34945 Phone: (772) 460-9315 Fax: (772) 460-9316 DEHN is a world leading supplier of Lightning and Surge Protection with a hundred year history, that manufactures a complete range of DIN rail mounted, modular SPDs for measurement, control, instrumentation, and communication for all bus and power systems. Outdoor units are available for hub mounting in SS threaded pipes. DENSO NORTH AMERICA Booth #414 9747 Whithorn Drive Houston, TX 77095 Phone: (281) 821-3355 Fax: (281) 821-0304

DJA INSPECTIONS SERVICES, INC. Booth #225 PO Box 384 1763 Allegheny Blvd Reno, PA 16343 Phone: (814) 676-3663 Fax: (814) 676-4534

DON MILLER & ASSOCIATES, INC. Booth #104 PO Box 15947 Baton Rouge, LA 70895 Phone: (225) 275-2926 Fax: (225) 275-5112 For the last two decades, Don Miller & Associates has been a leader in the petroleum maintenance and construction fields. We offer experienced and well-trained crews, state-of-the-art equipment, as well as procedures that adhere to both the latest industry standards and safety regulations. We are proud of our commitment to quality work, integrity, and dedication to the needs of you, our clients. ECO-TANK SYSTEMS, LLC. Booth #628 PO Box 474 Pottstown, PA 19464 Phone: (484) 938-7066 Fax: (484) 932-8454

NISTM’s 2013 Conference and Trade Show Program Guide 19



Eco-Tank Systems LLC supplies, DEP Approved, tank monitoring systems for continues detection and containment of leakage from the tank shell, tank bottom, flanged connections and overfills. ENARDO, LLC. Booth #305 4470 S 70th East Avenue Tulsa, OK 74145 Phone: (918) 622-6161 Fax: (918) 622-0004 Enardo manufactures breather vents, flame arrestors, emergency relief vents and hatches for storage tank and vapor recovery applications. Valves and hatches offer the tightest sealing available. Arrestors feature a patented design which minimizes pressure drop. Certifications include USCG, FM, ATEX.

ENDRESS+HAUSER Booth #425 2350 Endress Place Greenwood, IN 46143 Phone: (317) 535-2108 Fax: (317) 535-2171

ENVENT CORPORATION Booth #501 3220 East 29th St., Long Beach, CA 90803 Phone: (562) 997-9465 Fax: (562) 997-9485

Endress+Hauser is a global leader in measurement instrumentation, services and solutions for industrial processes. Endress+Hauser supplies sensors, devices, systems and services for level, flow, pressure and temperature measurement as well as liquid analysis and measured value recording. Endress+Hauser supports its customers to optimize their process engineering procedures while taking into consideration reliability, safety, economic efficiency and environmental protection.

Envent Corporation was formed in 1992 to provide industrial and municipal customers with engineered solutions for a range of environmental problems. Envent is dedicated to building long-term client relationships, improving our clients’ administrative and operational efficiencies, and delivering outstanding results. ERECTRASTEP, LLC. Booth #516 219 Safety Ave Andrews, SC 29510 Phone: (843) 264-3729 Fax: (843) 264-8584

It’s not just a coating. It’s a cure. Corrosion isn’t all you’re fighting. Harsh weather, tight outage schedules and environmental concerns require coatings that can multi-task. Novocoat’s long-lasting, easy to apply linings cure at low temperatures so your tank or pipeline can return to service fast. And as 100% solids, VOC-free products, they’re safe for workers and the environment. Learn how we can be your cure at

® 877-98ARMOR

20 NISTM’s 2013 Conference and Trade Show Program Guide

15TH ANNUAL INTERNATIONAL ABOVEGROUND STORAGE TANK CONFERENCE & TRADE SHOW ErectaStep is a modular platform stair system designed to provide an alternative to custom metal fabrication. With only four components, users can quickly and easily assemble an infinite number of configurations. Popular configurations include cross-over stairs for access over obstructions, stair platforms for repeated maintenance access, ladder replacement and mezzanines. ERGON ARMOR NOVOCOAT Booth #210 PO Box 1639 Jackson, MS 39215 Phone: (877) 982-7667 Fax: (601) 933-3381 ErgonArmor, a division of Ergon Asphalt & Emulsions, is a part of a multinational, diverse organization, providing products and services in energy and exploration, refining, terminaling, transportation and real estate development. Ergon is a privately-held, family operated business headquartered in Jackson, MS employing over 3,000 people at 70+ locations throughout the globe. FABENCO, INC. Booth #602 2002 Karbach Street Houston, TX 77092 Phone: (713) 686-6620 Fax: (713) 688-8031 FabEnCo is the 45-year manufacturer of the self-closing industrial safety gate as required by OSHA for fall protection at the tops of ladders, platforms, and stairs. Made in the U.S.A. FALCON TECHNOLOGIES Booth #503 575 N Dairy Ashford, Ste 300 Houston, TX 77493 Phone: (281) 921-6672 Falcon Technologies® has engineered a spray-on polymer coating that can

be applied to a variety of surfaces, providing a seamless, durable layer of protection. The Falcon Liner® provides superior protection in a broad range of applications including tank lining and secondary containments. FHG, INC. Booth #413 PO Box 23030 Charlotte, NC 28227 Phone: (704) 567-9548 Fax: (704) 567-1848 Since 1982, FHG, Inc. has specialized in storage tank and piping construction. Tank services include tank cleaning, coatings, seals, IFR installations and API 653 repairs. Piping services include all aspects of terminal piping, including loading rack construction, VCU & VRU installations, and blending system installations. FISHER TANK COMPANY SPONSOR Booth #114 3131 West 4th Street Chester, PA 19013 Phone: (610) 494-7200 Fax: (610) 485-0157 Fisher Tank Company provides tank storage solutions. We have served the AST industry since 1948, and today we are proud to combine our old-fashioned service and values with the very best in technology and equipment. Fisher Tank Company provides start to finish tank solutions, including value engineering, custom fabrication and turnkey construction services. For existing facilities, Fisher Tank Company provides expert tank repair, maintenance and modification services. What solutions can we provide for you? FORGE TECH INC. Booth #527 900 Anders Lane, Building #15 Kemah, TX 77565 Phone: (888) 854-8414


Fax: (832) 864-2235 Forge Tech is an industrial technology company that provides products, solutions and services, driven by our patented portable friction forge bonding process, allowing us to safely perform repairs and improvements to in-service operating equipment and structures within restricted or hazardous worksites. FOX-TEK CANADA INC. Booth #613 151 Randall Street, Ste 101 Oakville, ON, L6J 1P5 Canada Phone: (905) 949-2288 Fax: (905) 338-2335 FOX-TEK Canada Inc. is engaged in the development, design, manufacture and supply of remote nonintrusive monitoring systems using: electric field mapping sensor arrays and fiber optic sensors. FOX-TEK’s systems serve the needs of the oil and gas, power generation, chemical, mining, and civil structure market sectors, worldwide. GE ANALYTICAL INSTUMENTS Booth #431 6060 Spine Road Boulder, CO 80301 Phone: (800) 255-6964 Fax: (303) 942-3979 GE Analytical Instruments designs and manufactures Leakwise Oil-onWater Systems for reliable, worry-free, 24/7 hydrocarbon spill detection and monitoring. The new SLC-220 controller enables smart communication with sensors throughout a monitoring site. Attend our talk, Smart Tank Farm Leak Detection Monitoring and Communication, to find out more. GEM MOBILE TREATMENT SERVICES Booth #511 1434 Sens Road

NISTM’s 2013 Conference and Trade Show Program Guide 21



LaPorte, TX 77571 Phone: (281) 471-0107 Fax: (281) 470-0162 GEM Mobile Treatment (GEM) is the nationwide leader in providing comprehensive emissions management and mobile water treatment services to the energy sector. Our services include mobile vapor control, tank degassing, and vapor monitoring & reporting. GEM offers liquid carbon scrubbing, vapor combustion, and carbon adsorption. We operate from five locations throughout the U.S. GENERAL COMBUSTION CORP Booth #510 5201 N Orange Blossom Trail Orlando, FL 32810 Phone: (407) 290-6000 Fax: (407) 578-0577 A manufacturer of the HY-WAY Brand of Thermal fluid heaters, heat exchangers, pre-heaters and tanks( horizontal, vertical and portable); tank coil packages, jacketed pipe, piping systems and controls for terminals, industrial and processing applications. GENERAL INDUSTRIES, INC. Booth #523 PO Box 1279 Goldsboro, NC 27534 Phone: (919) 751-1791 Fax: (919) 751-8186 General Industries is a manufacturer of steel storage tanks for both above ground and underground installation. Our product lines include UL and API labeled tanks for petroleum, chemical and water storage. We also fabricate oil water separators and interceptors. GLASGOW EQUIPMENT SERVICES INC. Booth #604 1750 Hill Ave West Palm Beach, FL 33407 Phone: (561) 842-7236

Fax: (561) 842-7402 Glasgow Equipment Service, Inc. is full service fueling system distributor/ contractor that provides Sales, Service and Installation work and serves the Eastern United States , Bahamas and the Carribean. Glasgow has been building fueling facilities since 1952. We currently have projects in progress in Florida, Texas, Canada, Bahamas (the Abaco’s & Berry Islands), Dominican Republic, Curacao and Panama. We are a factory direct distributor for Gilbarco, Veeder Root, PMC, Total Controls, Xerxes, Modern Welding, Red Jacket, OPW, FE Petro (UPP) and many others. We are a licensed Florida PSSC Specialty Contractor and a Florida General Contractor. GROTH CORPORATION Booth #131 13650 N Promenade Blvd Stafford, TX 77477 Phone: (281) 295-6800 Fax: (281) 295-6999 Groth Corporation is a global leader in the manufacturing of pressure/vacuum relief valves, flame and detonation arresters, blanket gas regulators and other low pressure relief products which have been protecting a variety of industries for more than 50 years. Come visit with us at booth #131! HALL TANK COMPANY, LLC Booth #600 N Little Rock, AR 72119 Phone: (501) 945-3211 Fax: (501) 945-4477 Hall Tank manufactures and sells the finest tanks, all made to quality standards that are legendary in the industry. The fact is, we can make just about any steel storage tank to the strictest quality standards, such as: ACT-100® Single and Double Wall Underground Tanks and Plasteel®

22 NISTM’s 2013 Conference and Trade Show Program Guide

Single and Double Wall Underground Tanks. We are proud to maintain a 100% STI quality rating. HAMMONDS FUEL ADDITIVES, INC. Booth #402 910 Rankin Road Houston, TX 77073 Phone: (281) 951-1428 Fax: (281) 847-5129 Hammonds Fuel Additives of Houston, TX is the manufacturer of Biobor JF, the worldwide standard diesel and jet fuel biocide and lubricity agent since 1965. Biobor JF is MIL-SPEC, EPA approved and holds more airframe certifications, engine manufacturer approvals and tank manufacturer approvals than any additive or biocide in use today. Because it is fuel and water soluble, Biobor JF decontaminates the entire fuel load of microbial growth as well as adding lubricity to ULSD fuels. HANSA CONSULT OF NORTH AMERICA LLC. SPONSOR Booth #215 200 International Dr. Bldg#120 Portsmouth, NH 03801 Phone: (603) 422-8833 Fax: (603) 422-8865 Hansa Consult of North America (HCNA): Provides US EPA Third Party certified leak detection services for hydrant and pipeline systems at DOD and commercial fueling facilities worldwide. Services include automated permanent installations, and various mobile point-in-time testing applications. HAYWARD BAKER, INC. Booth #221 6850 Benjamin Road Tampa, FL 33634 Phone: (813) 884-3441 Fax: (813) 884-3820

15TH ANNUAL INTERNATIONAL ABOVEGROUND STORAGE TANK CONFERENCE & TRADE SHOW Hayward Baker is North America’s leader in geotechnical construction, providing economical techniques for settlement control of new tanks, and for settlement correction of existing tanks. Ranked #1 Specialty Foundation contractor by Engineering NewsRecord. Ground improvement allows for higher tank capacities. For a list of offices visit our website or call 800456-6548. HEATEC, INC. Booth #526 5200 Wilson Road Chattanooga, TN 37410 Phone: (423) 821-5200 Fax: (423) 825-3488 Heatec, an Astec Industries Company, has been in business since 1972. Heatec designs and builds thermal fluid heaters from 1mm to 60mm BTU/hr. Also we build shop fabricated tanks to UL-142 and API -650 standards. Heatec is heavily involved in building new asphalt storage terminals. We do major mechanical design and electrical engineering work in addition to building much of the equipment. We design and build the equipment at our factory in Chattanooga, Tennessee. HMT INC. SPONSOR Booth #300 24 Waterway Ave, Ste 400 The Woodlands, TX 77380 Phone: (281) 681-7000 Fax: (281) 419-7689 HMT, founded in 1978, has been the global leader in storage tank technology development. Products: External Seal Systems | Internal Seal Systems |Floating Suction and Drain Systems |Geodesic Dome Roofs |Skin and Pontoon Floating roofs |Full Contact Floating Roofs |Emissions Reduction Devices Strategic Solutions: Emissions Reduction |Capacity Optimization |Inventory Reduction |Engineered Safety

|In-Service Cycle Optimization


ect management and complete site demolition

HOUSTON POLYTANK LLC Booth #616 208 Craig Street Hopkins, MO 64461 Phone: (660) 778-3393 Fax: (660) 778-3446 Houston PolyTank extrudes Polyethylene and Polypropylene tanks. Polyethylene tanks are NSF 61 certified. Polypropylene tanks can handle temperatures up to 180°F. Tank sizes vary from 50 – 50,000 gallons. Reactor tanks can be cone or sloped bottom. Tank options include; side manways, catwalks, mixer mounts, handrails and caged ladders. These structural constructed tanks can replace rubberlined carbon steel, stainless steel, fiberglass and roto-molded tanks. INDUSTRIAL HEATER Booth #128 8454 Wolf Lake Dr. Bartlett, TN 38133 Phone: (901) 382-4761 Fax: (901) 382-4766 Industrial Heater distributes and installs fully supervised, 4-wire, longline, liquid-phase leak detection systems. Product-specific sensors for fuels, hydrocarbon chemicals, and aqueous chemicals. Backside wireless & hardwired communications in MODBUS, METASYS, ETHERNET. INDUSTRIAL MAINTENANCE GROUP, INC. Booth #217 1904 Industrial Park Drive Plant City, FL 33566 Phone: (813) 659-3512 Fax: (813) 659-3265 IMG provides innovative industry solutions to secondary containment coatings with electronic leak and spill notification. IMG can provide pipeline repair systems, leak detection, proj-

INSULTHERM, INC. Booth #213 701 S 16th Street LaPorte, TX 77571 Phone: (281) 470-8442 Fax: (281) 470-2042 Tufseam Tank Insulation Insultherm’s Tufseam Panel System covers a wide range of temperatures; from minus 50 degrees Fahrenheit on ammonia tanks to 900 degrees Fahrenheit on coke drums and other vessels. INTERNATIONAL PAINT LLC Booth #422 SPONSOR 6001 Antoine Drive Houston, TX 77091 Phone: (713) 682-1711 Fax: (713) 684-1318 International Paint LLC is a global provider of corrosion resistant coating systems and is a Leader in Linings. Our comprehensive range of brands: Interline, Devoe Coatings, Enviroline and Ceilcote offer a complete range of thin film, solvent free and reinforced lining solutions. With over 200 years of combined experience within the industry, International Paint can offer global distribution and expert product service. INTERNATIONAL TANK SERVICE, INC. Booth #415 1085 S. Metcalf Street Lima, OH 45804 Phone: (419) 223-8251 Fax: (419) 227-4590 International Tank Service, Inc. designs, fabricates and erects API 650 aboveground storage tanks throughout the U.S.. Other services include API 653 AST Inspections, tank repairs and modifications. Consulting

NISTM’s 2013 Conference and Trade Show Program Guide 23



Engineers. Fourth generation family business. Established 1977. INTERTEK Booth #618 4702 Westway Corpus Christi, TX 78408 Phone: (361) 693-3830 Fax: (361) 289-7477 Intertek is an international technical services industry leader, with more than 33,000 people in 1,000 locations in over 100 countries. Expertise includes Testing, Inspection, Consulting, Calibration, and more. For more than 127 years, companies around the world have depended on Intertek to ensure the quality and safety of their systems. Visit the website to learn more. J.J. WHITE INC. Booth #127 5500 Bingham Street Philadelphia, PA 19120 Phone: (215) 722-1000 Fax: (215) 722-1252 With over 90 years of safe field experience in the construction industry, JJ White provides coast-to-coast services for the refining, petrochemical, and bulk storage industries. Fabrication and erection of new aboveground tanks; repair, modification, and upgrade services per API 650 standards. OSHA VPP Star Certification for entire mobile workforce. JENSEN MIXERS INTERNATIONAL SPONSOR Booth #412 5354 South Garnett Tulsa, OK 74146 Phone: (918) 627-5770 Fax: (918) 663-4939 Jensen Mixers International is a family owned company, founded in 1950 in Tulsa, Oklahoma. Jensen pioneered development of the Variable-Angle

mixer and the Pitch-Adjusted propeller significantly improving the performance of mixers used in sediment removal operations and utilization of motor power for improved mixing. JOHN ZINK HAMWORTHY COMBUSTION JOHN ZINK COMPANY LLC Booth #313 11920 East Apache Tulsa, OK 74116 Phone: (918) 234-2903 Fax: (918) 234-1968 John Zink Hamworthy Combustion is a worldwide supplier of vapor control equipment for evaporative hydrocarbon emissions from storage and transportation vessel loading and degassing operations, with over 2,000 vapor recovery and vapor combustion systems installed. JORDAN TECHNOLOGIES, INC. Booth #321 2820 S English Station Road Louisville, KY 40299 Phone: (502) 267-8344 Fax: (502) 267-8379 An International Company offering a full range of new and used Vapor Control Equipment along with Portable Combustion Equipment used for terminal operations support and tank de-gassing. KELLEY CONSTRUCTION, INC. Booth #102 12550 Lake Station Place Louisville, KY 40299 Phone: (502) 239-2848 Fax: (502) 239-6820 Kelley Construction Inc. covers virtually all civil aspects of liquid storage foundations and containment -- from new terminal development to tank maintenance and regulation upgrades.

24 NISTM’s 2013 Conference and Trade Show Program Guide

L&J TECHNOLOGIES Booth #322 5911 Butterfield Road Hillside, IL 60162 Phone: (708) 236-6000 Fax: (708) 236-6006 L&J Technologies offers the complete array of products and services for tank equipment, storage and level gauging needs. Manufactured in the United States, L&J Technologies products include tank gauging solutions, transmitters, vents, arresters, digester solutions, level measurement, strip guiding, ultrasonic, capacitance and microwave switches and probes. LIGHTNING MASTER CORPORATION Booth #420 1770 Calumet Street Clearwater, FL 33765 Phone: (727) 447-6800 Fax: (727) 499-0138 Since 1984, Lightning Master Corporation is a world leader in providing proven-effective static solutions and lightning protection for the oil and gas industry. We have a proven track record of reducing production down time, protecting valuable equipment investments, mitigating environmental risks, and improving safety for company personnel and surrounding neighbors. LOTUS MIXERS Booth #529 PO Box 704 Nokomis, FL 34274 Phone: (941) 966-1885 Fax: (941) 966-6439 LOTUS Mixers is a global supplier of agitators (top and side entry). We offer a complete range of side entry mixers with belt or gear driven, fixed or swivel angle designs. These mixers are equipped with our patented 261 cartridge seals and FloMax impellers designed for BS&W, product blending and temperature uniformity/

15TH ANNUAL INTERNATIONAL ABOVEGROUND STORAGE TANK CONFERENCE & TRADE SHOW homogeneity. LUDECA, INC. Booth #525 1425 NW 88th Avenue Doral, FL 33172 Phone: (305) 591-8935 Fax: (305) 591-1537 Leading Provider of Preventive, Predictive and Corrective Maintenance Solutions including laser shaft alignment, online condition monitoring, vibration analysis and balancing equipment as well as software, services and training. MAGNETROL INTERNATIONAL Booth #429 5300 Belmont Road Downers Grove, IL 60515 Phone: (630) 969-4000 Fax: (630) 969-9489 Magnetrol is the worldwide leader in level and flow controls. 80 years of meeting evolving customer needs through innovation and expertise have resulted in the most complete line of liquid level controls available today. Knowledge of our core markets, oil & gas and refining, enable us to assist you in understanding and meeting the requirements of hydrocarbon storage and the demands of the fourth edition of API RP2350. MASCOAT Booth #530 4310 Campbell Road Houston, TX 77041 Phone: (713) 465-0304 Fax: (713) 465-0302 Mascoat engineers and manufactures insulating coatings that protect personnel, prevent CUI, retain energy and can insulate up to 375°F. Since they are spray-applied, the coatings can be installed rapidly. Energy savings are consistently higher with Mascoat’s coatings, as heat is reflected back into the substrate instead of

dissipated through, like with conventional insulation. MASS TECHNOLOGY CORPORATION Booth #125 4302 State Hwy 42 Kilgore, TX 75662 Phone: (903) 986-3564 Fax: (903) 984-3569


roads and embankments. Solutions that are faster, less complicated, and less expensive for your next project. MESA Booth #113 4141 Airport Road Cincinnati, OH 45226 Phone: (513) 321-4511 Fax: (513) 321-8178

Mass Technology Corporation is the leading provider of precision storage tank leak measurement. Our mass measurement system is applicable to all types and sizes of tanks and viscous products. MATRIX SERVICE Booth #418 5100 E. Skelly Dr., Ste. 700 Tulsa, OK 74135 Phone: (918) 838-8822 Fax: (918) 838-8810 We are an industry leader in the engineering, fabrication, construction, maintenance, modification, repair and relocation of aboveground storage tanks (ASTs) and specialty vessels. Our AST capabilities cover atmospheric, pressurized and cryogenic tanks for liquid, gas and bulk storage, in addition to turnkey terminals. MENARD Booth #130 275 Millers Run Rd Bridgeville, PA 15017 Phone: (412) 257-2750 Fax: (412) 257-8455 Menard is a design–build specialty geotechnical contractor offering expertise and ground improvement services for sites with poor soil. We combine extensive experience and innovative techniques to deliver practical, sustainable solutions that improve the ground and reduce settlement for liquid storage tanks, containment structures, platforms, buildings,

Since 1967, Mesa has manufactured flexible roof drain systems, skimmers, foam delivery systems, floating roof seal systems, gauge pole covers, roof leg socks, repair bladders, vapor bladders and other specialty products for aboveground storage tanks. MFE ENTERPRISES, INC. Booth #320 150 Holder Lane Dripping Springs, TX 78620 Phone: (281) 441-8284 Fax: (281) 441-8361 MFE Enterprises, Inc. is proud to announce the release of their new adjustable MFE PipeScan and improved Mark III lineup. The Mark III Floor Scanner addresses many is-sues faced by the modern day tank inspector, such as improved inspections through coated floors, improved inspections through thicker plates, fully adjustable thresholds for improved thresholding techniques, and the ability to produce color-coded maps of carbon steel loss across the tank floor. Initially, the Mark III Floor Scanner will be available in three different models: Manual Operation, Stop-On-Defect, Mapping. Please stop by the both for a demo of the scanners! MICROPACK DETECTION Booth #427 1227 Lake Crest Court Fort Collins, CO 80526 Phone: (970) 377-2230 Fax: (970) 377-2273 The Micropack line of visual flame de-

NISTM’s 2013 Conference and Trade Show Program Guide 25



tection, offers the highest immunity to false alarms in outdoor industrial facilities. The flame detectors use standard CCTV technology and therefore offers an additional benefit of being able to provide video surveillance as well as fire detection, all in the same device. MIDWEST STEEL CO, INC. Booth #406 9825 Moers Road Houston, TX 77075 Phone: (713) 991-7843 Fax: (713) 991-4745 Midwest Steel Company works nationwide and has been family owned and operated for 45 years. They are a full service specialty contractor that specializes in plant and refinery dismantling, tank and terminal demolition and the removal and sale of process equipment. MISTRAS GROUP Booth #315 195 Clarksville Road Princeton Junction, NJ 08550 Phone: (609) 716-4000 Fax: (609) 716-0706 MISTRAS provides an array of nondestructive testing and inspection solutions that adhere to API-653 in- and out-of-service guidelines. Moreover, our “Aboveground Storage Tank Center of Excellence” offers customized, non-intrusive tank inspection programs that allow users to determine tanks’ relative condition. Whether it’s the tank floor (TankPAC), the annular ring and diameter (TALRUT) or shell and roof welds along with heat affected zones (Time of Flight Defraction), MISTRAS has a solution. MODERN WELDING COMPANY OF FLORIDA Booth #324 1801 Atlanta Ave Orlando, FL 32806 Phone: (407) 843-1270 Fax: (407) 423-8187

Modern Welding is the largest fabricator of steel tanks in the USA with 80 years of fabrication history. We fabricate potable and non-potable water storage tanks, aboveground and underground fuel storage tanks, chemical tanks, pressure vessels, and have the newest technology in oil water separators. We have facilities around the Country to facilitate easier shipping to the destination. We have company sales representatives to assist you with your project requirements. MORRISON BROS. CO. Booth #615 570 E 7th Street Dubuque, IA 52001 Phone: (563) 583-5701 Fax: (563) 583-5028 Morrison Bros. Co. is a leading manufacturer of petroleum marketing products used in a variety of applications including aboveground storage tanks, service stations, tank trucks, and various environmental areas. Some of these products include vents, valves, spill containers, gauges, and manholes. MOTT-SMITH CONSULTING, INC. Booth #628 1933 Commonwealth Lane Tallahassee, FL 32303 Phone: (850) 391-9835 Fax: (850) 692-3715 The Mott-Smith Consulting Group has extensive experience with underground/ aboveground storage tank system management, represents Atlas Fueling Systems and the Eco-Tank Alternative Dike Field System, and provides environmental consulting services. MPC CONTAINMENT INTERNATIONAL Booth #222 4834 S Oakley Avenue Chicago, IL 60609 Phone: (773) 650-6026 Fax: (773) 650-6028

26 NISTM’s 2013 Conference and Trade Show Program Guide

MPC designs, manufactures, and installs primary and secondary containment systems featuring state-ofthe-art materials. We have served as a resource for engineers, contractors, and other specifiers worldwide since 1976. NORTH AMERICAN INDUSTRIAL SERVICES Booth #611 1240 Saratoga Road Ballston Spa, NY 12020 Phone: (518) 885-1820 Fax: (518) 885-7638 North American Industrial Services provides a turnkey solution to your tank cleaning needs. We have fully automated tank cleaning system with knowledgeable and skill personnel. We provide vacuum trucks, water blasting (10,000 to 40,000 psi), abrasive blasting, chemical cleaning, catalyst handling and pipeline cleaning. NTIC/ZERUST Booth #328 4201 Woodland Road Circle Pines, MN 55014 Phone: (763) 225-6600 Fax: (763) 225-6645 NTIC / Zerust is the world’s largest manufacturer of Vapor Corrosion Inhibitors (VCIs). Based in Circle Pines, MN, they have over 35 years of experience with products which reduce steel corrosion rates in multiple industries. VCIs are proven to effectively protect corrosion prone areas of storage tank floors and roofs. OMNTEC MFG. INC. Booth #126 1993 Pond Road Ronkonkoma, NY 11779 Phone: (631) 981-2001 Fax: (631) 981-2007 OMNTEC are the industry’s premier

15TH ANNUAL INTERNATIONAL ABOVEGROUND STORAGE TANK CONFERENCE & TRADE SHOW tank monitoring experts. We offer overfill protection, inventory monitoring, leak detection and pipeline interface detection. We offer both wired and patented, reliable wireless solutions for all your storage tank monitoring application. We also offer FuelCheck®, the leading solution for maximizing product tank purity and minimizing transmix volumes. PARATHERM HEAT TRANSFER FLUIDS Booth #132 31 Portland Road W. Conshohocken, PA 19428 Phone: (610) 941-4900 Fax: (610) 941-9191 In petroleum refining, used oil recycling, tank farms and pipelines, Paratherm provides heat transfer fluids, system cleaning liquids, and technical services. Paratherm’s synthetic heat transfer fluids operate up to 675°F. For plants seeking biodegradable fluids, Paratherm MG™ operates up to 550°F and has a minimum startup temperature of -37°F. PCA ENGINEERING, INC. Booth #403 57 Cannonball Rd Pompton Lakes, NJ 07442 Phone: (973) 616-4501 Fax: (973) 616-4451 For over 50 years, PCA Engineering, Inc has been a full service cathodic protection firm. We have NACE certified CP & CIP personnel on staff. Additionally, we have certified inspectors to meet all of your API inspection needs, These include API 510, 570 & 653 standards. Contact us to see how we can help meet all of your compliance needs. PD-LOGISTICS Booth #528 5041 Spencer Hwy #306 Pasadena, TX 77505 Phone: (832) 698-9510

PD-Logistics is the leading technology provider of Mobile Data Solutions for field operations in the Petrochemical Industry. API 653, 510 and 570 processes ready to implement. Easily integrates with existing systems - Secure connection and integration between field and office operations - Minimal training needed. PECOFACET Booth #612 9910 E 56th Street N Tulsa, OK 74117 Phone: (800) 223-9910 Fax: (918) 272-8787 PECOFacet is a global coalescing, filtration and separation products and services company. With 140 years of history, over 800 people and a presence in more than 73 countries, PECOFacet works with customers in the environmental, process, energy, marine and aviation industries. Since developing the first Aviation Coalescer in 1943, our advanced filtration and separation technologies have been at the forefront of Aviation fueling. From the refinery to wing tip, our line of aviation products ensure that clean, dry fuel is maintained every step of the way. PEMY CONSULTING Booth #628 PO Box 23842 Pleasant Hill, CA 94523 Phone: (925) 356-1294 Fax: (925) 934-6574 PEMY Consulting helps you with engineering, risk assessment, and other services for storage tanks, piping and pressure vessels. Development of tank overfill protection programs, piping inspection, and reliability programs. Also, API Training and seminars for safety analysis (hot taps, hazardous atmospheres), risk, overfill protection, LOPA, tank inspection, and piping inspection.


PENTAIR THERMAL MANAGEMENT Booth #519 7433 Harwin Drive Houston, TX 77036 Phone: (800) 545-6258 Fax: (800) 527-5703 Pentair Thermal Management, formerly known as Tyco Thermal Controls, is the world’s largest provider of complete heat management systems, leak detection systems and turnkey solutions for the general process, oil and gas, chemical and power generation industries. PETROCHEM INSPECTION SERVICES, INC. Booth #307 1475 E Sam Houston Pkwy S, Ste 100 Pasadena, TX 77503 Phone: (281) 884-5100 Fax: (281) 884-5199 PetroChem Inspection Services, Inc. provides a complete array of Tank Inspection Services to include API 653, MFL, Tank Calibration, Helium Testing, and much more. Please visit our booth for more information. PETROTECH SOUTHEAST, INC. Booth #318 23800 County Road 561 Astatula, FL 34705 Phone: (407) 656-8114 Fax: (343) 352-2635 As a Pollutant Storage System Contractor with over 20 years of environmental and industrial services experience, Petrotech Southeast has the trained personnel, equipment and knowledge to perform any tank and/ or pipe cleaning project. Other services include demolition, soil removal, asbestos, lead and mold remediation / abatement. Hazwoper, Confined Space and MSHA trained.

NISTM’s 2013 Conference and Trade Show Program Guide 27



PHILADELPHIA MIXING SOLUTIONS, LTD. Booth #211 1221 East Main Street Palmyra, PA 17078 Phone: (717) 832-2800 Fax: (717) 832-1740 A trusted name over 120 years. Process optimization experts for tank storage, refining, pipelines, terminals. Home to world’s largest test lab. Global leaders providing solutions to lower operating cost, improve efficiency and increase reliability by effecting your bottom line employing unparalleled products and our cutting-edge technology. Kestrel™ static mixers, the latest Cutlass™ BSE mixers and Lancer™ advanced pitch propellers are designed for energy conservation and meet the highest standards set by major oil companies and APS/PIP. PINNACLEAIS Booth #326 One Pinnacle Way Pasadena, TX 77504 Phone: (281) 598-1330 Fax: (281) 598-1345 Based in Houston, TX, PinnacleAIS is a leading technology and services provider, specializing in wholesale improvements in asset integrity for the oil and gas, chemical, and mining industries. Through innovative technology and world class services, PinnacleAIS offers a unique approach to asset integrity, helping operating companies realize substantial improvements in compliance and safety while simultaneously reducing costs and business risks. PinnacleAIS is a member of numerous trade organizations including The American Petroleum Institute (API). PIPE PRODUCTS, A WOLSELEY INDUSTRIAL GROUP CO. SPONSOR Booth #108 5122 Rialto Road West

Chester, OH 45069 Phone: (513) 623-0726 Fax: (513) 881-7855 Pipe Products is a stocking master distributor for many of the premier manufactures serving the liquid terminal industry. Pipe Products also offers turn-key, custody transfer skid packages as well as, start-up / commissioning & field service capabilities. PITTSBURG TANK & TOWER CO, INC. Booth #134 PO Box 913 Henderson, KY 42419 Phone: (270) 826-9000 Fax: (270) 831-7025 Pittsburg Tank & Tower Company is one of North America’s leading full-service suppliers of field-erected tanks, maintenance and inspection services. Beginning in 1919, Pittsburg Tank & Tower Company committed its resources to providing engineered structures and exemplary service for municipal water storage and industrial storage facilities. PLS CONSTRUCTION, INC. Booth #202 2257 N Loop 336W, #140-456 Conroe, TX 77304 Phone: (936) 494-2001 Fax: (936) 494-2004 Installer of geomembrane liners for primary and secondary containment. PLS also provides inspections of installed geomembranes. All type geomembranes, HDPE, XR-5, Polyurethane, and Bentomat. Design assistance and site inspections. POLYSTAR CONTAINMENT Booth #426 2030 Midway Drive Twinsburg, OH 44087 Phone: (330) 963-5100 Fax: (330) 405-6186

28 NISTM’s 2013 Conference and Trade Show Program Guide

Polystar manufactures secondary containment systems for AST’s, tanker trucks and rail tankers. Our products are extremely durable, easily installed and while considered semi-permanent, can be relocated for temporary applications. POND & COMPANY SPONSOR Booth #100 3500 Parkway Lane, Suite 600 Norcross, GA 30092 Phone: (678) 336-7740 Fax: (678) 336-7744 Pond is a full-service A-E firm providing design, inspection and turn-key construction services to clients across the country and worldwide. Our expertise includes planning, project management, process engineering, tank/piping design, controls system design, fire protection, corrosion protection, permitting, tank/pipeline integrity management, regulatory compliance and construction management. Pond’s design experience ranges from crude handling facilities through pipeline and bulk terminals to the point of use including extensive aviation fueling system experience. PRAXAIR SERVICES, INC. Booth #120 39 Old Ridgebury Road Danbury, CT 06810 Phone: (203) 837-2000 Fax: (203) 837-2532 Praxair Services provides asset integrity services that include Seeper Trace (SM) pipeline assessment, Tracer Tight(R) leak detection and Guided Wave ultrasonic inspection. Praxair offers one of the most sensitive leak detection services available and does so with no disruption in service. PREMIER CORROSION PROTECTION SERVICES, INC. Booth #608 9508 Merchants Center Dr

15TH ANNUAL INTERNATIONAL ABOVEGROUND STORAGE TANK CONFERENCE & TRADE SHOW Tampa, FL 33624 Phone: (813) 569-0412 Fax: (813) 569-0413 Premier is a specialty contractor located in Tampa, FL. One of the services we offer is the rehabilitation of steel or FRP tanks using our Premier Liner consisting of multiple layers of FRP composite material combined with resins specifically chosen for the product/temperatures. Visit the website and click on Tanks and Liners. PRIME ENGINEERING Booth #325 3715 Northside Pkwy NW, Bldg 300, Ste 200 Atlanta, GA 30327 Phone: (404) 425-7100 Fax: (404) 425-7101 Since 1990, Prime Engineering, Inc. has been providing award-winning services to the petroleum industry with fully-integrated capital planning & feasibility, engineering design and permitting, surveying, and full construction services. PROACT SERVICES CORPORATION Booth #505 1355 Sheffield Blvd Houston, TX 77379 Phone: (832) 519-9770 Fax: (832) 519-9669 ProAct Services Corporation is a National Leader in Industrial Degassing Services and On-Site Water Treatment for the Petroleum, Chemical, Pipeline, and Tank Terminal Industries. ProAct Services provides Industrial Degassing & Vapor/Odor Control Services • Tank Bottom Water Treatment • Tank Hydrotest Services • Hydrotest Water Treatment • Construction Dewatering • and Hydro Excavation Dewatering. Visit our Website for more information!

PROTECTOSEAL COMPANY Booth #404 225 W Foster Ave Bensenville, IL 60106 Phone: (630) 595-0800 Fax: (630) 595-8059 Vapor & Flame Control Equipment to include: Pressure/Vacuum Relief Vents, Emergency Vents, Flame & Detonation Arresters, Tank Blanketing Valves and Specialty Vents & Valves. Products designed to ensure plant and personnel safety, environmental protection, and efficient operations. PROTEGO USA, INC. Booth #408 497 Jessen Lane Charleston, SC 29492 Phone: (843) 284-0300 Fax: (843) 284-0304 PROTEGO® offers a comprehensive line of flame arresters, valves, and tank accessories. The products are installed for different applications: in tank farms for flammable liquids; in chemical and pharmaceutical processing facilities; in ship building; on oil platforms and in loading facilities. QUEST INTEGRITY GROUP, LLC. Booth #226 2465 Central Ave, Ste 110 Boulder, CO 80301 Phone: (303) 415-1475 Fax: (303) 415-1847 Quest Integrity Group, a TEAM Industrial Services Company, is a global leader in the development and delivery of asset integrity and reliability management services and solutions for our clients. Our solutions consist of technology-enabled, advanced inspection and engineering assessment services and products that help companies in the refining and chemical, pipeline, syngas and power industries reduce operational and safety risks, improve operational planning and


increase profitability. RAVEN INDUSTRIES Booth #617 1813 E Ave Sioux Falls, SD 57104 Phone: (800) 635-3456 Fax: (605) 331-0333 Raven Industries Inc. is a polyethylene film manufacture located in Sioux Falls, SD. Raven has been in business since 1956 and is ranked in the Top 100 Best Small Business’s by Forbe’s. Raven manufactures polyethylene films ranging from 1-60 mils thick in varying textures, colors and reinforcements. Nasdaq – RAVN RIVER CONSULTING Booth #500 650 Smithfield Street, Suite 300 Pittsburgh, PA 15222 Phone: (412) 471-5900 Fax: (412) 471-2988 From terminal expansions and tank design to the development of multimillion dollar greenfield facilities, River Consulting develops cost-effective, timely solutions for moving and storing a variety of liquid products. River Consulting’s liquid handling experts understand the industry’s challenges and design systems that address operational, as well as technical needs. RMF Booth #309 1125 W 2300, PO Box 16409 Salt Lake City, UT 84116 Phone: (801) 596-2400 Fax: (801) 322-2702 RMF is a full service construction company specializing in the engineering, fabrication and field erection of plate steel structures. New Construction, Repairs, & Maintenance of Tanks, Spheres, stacks, silos, and more. API, AWWA, ASME.

NISTM’s 2013 Conference and Trade Show Program Guide 29



ROSEMOUNT TANK GAUGING Booth #310 6005 Rogerdale Road Houston, TX 77072 Phone: (281) 988-4000 Fax: (281) 988-4441 Rosemount Tank Gauging is the market leading manufacturer of radarbased tank gauging systems with over 30 years experience and over 100,000 installations worldwide. High accuracy inventory measurement and SIL-2/SIL-3 approved overfill protection. ROSEN USA SPONSOR Booth #206 14120 Interdrive East Houston, TX 77032 Phone: (281) 925-4546 Fax: (281) 442-8866 ROSEN provides a complete range of services for the inspection of tanks and plant & terminal facilities. Our qualified inspectors provide certified API inspections with the most advanced inspection technology in the industry for storage tanks, product lines, flow lines and other above ground piping. SCHNEIDER ELECTRIC Booth #112 200, 10333 Southport Dr SW Calgary, AB Canada T2W 3X6 Phone: (403) 212-2407 A global energy management specialist, Schneider Electric operates in more than 100 countries. The company delivers integrated solutions across multiple market segments. Its broad refined fuels offerings include DTN Guardian3™ — a best-in-class terminal solution that speeds loading and increases throughput for greater efficiencies and reduced costs.

SCHROEDER ENVIRONMENTAL CLEANING SERVICES, INC. Booth #228 PO Box 45 DePere, WI 54115 Phone: (920) 655-8650 Fax: (920) 435-1762 We seek to enable greater success for our clients as an elite solutions provider. Our purpose guides how we operate with clients, vendors and employees. It reinforces our accountability to clients and it strengthens our desire to continuously improve ourselves and our service offerings to our clients. SEAMAN CORPORATION Booth #123 1000 Venture Blvd. Wooster, OH 44691 Phone: (704) 987-0055 Fax: (704) 987-0140 Seaman Corporation manufactures all types of fuel-resistant reinforced geomembranes which are used in both primary and secondary containment applications. Products include XR-5 which is for all types of non-aromatic hydrocarbons (jet fuel, diesel fuel, kerosene, fuel oil, crude) and Polyurethanes which are used to contain aromatic hydrocarbons such as unleaded gasoline.

INTRODUCING the newest addition to our successful Slick Sleuth product line – the SS100 is designed specifically for leak detection in tank farms. SMITH TANK & STEEL, INC. Booth #303 42422 Hwy 30 Gonzales, LA 70737 Phone: (225) 644-8747 Fax: (225) 644-1519 Smith Tank & Steel, Inc., a nationwide contractor, specializes in the construction of above ground steel welded storage tanks as well as storage tank field repair in compliance with API 650, 653, 620, AWWA, & ASME coded vessels. Smith Tank & Steel provides the highest level of safety and quality, while maintaining strict and timely schedules to meet or exceed their customers’ demands. SOLARES FLORIDA CORPORATION Booth #311 7625 NW 54th Street Miami, FL 33166 Phone: (305) 592-0593 Fax: (305) 592-0400

SLICK SLEUTH/INTEROCEAN SYSTEMS Booth #603 3738 Ruffin Road San Diego, CA 92123 Phone: (858) 565-8400 Fax: (858) 268-9695

Solares is an industry leading systems integrator and equipment distributor providing mission-critical technology solutions for the oil & gas industry. Our Refined Fuels and LPG/NH3 business units excel in process systems and measurement technologies for the transportation, storage, and custody transfer of gases and liquids. Established in 1919, Solares has provided equipment and service to the mid and downstream oil and gas industry for well over 90 years.

Slick Sleuth Oil Leak Detection/Alarm provides early warning detection and containment of leaks & spills. Slick Sleuth offers simple, reliable, cost-effective insurance against oil leak pollution, cleanup, mitigation, regulatory penalties & PR nightmares.

SOLIDIFICATION PRODUCTS INTERNATIONAL INC. Booth #327 PO Box 35 Northford, CT 06472 Phone: (203) 484-9494 Fax: (203) 484-9492

30 NISTM’s 2013 Conference and Trade Show Program Guide

15TH ANNUAL INTERNATIONAL ABOVEGROUND STORAGE TANK CONFERENCE & TRADE SHOW Imagine your oil containment area free of water, yet still 100% protected from oil sheen or an oil spill event. Fully acheived by using SPI’s patented, cost effective Petro-Barriers, Pipes & Plugs. Work with an innovative, 20+ year company to design your customized passive oil containment solution. SPCC compliant, easy to retrofit, check & changeout after an oil spill. Florida DEP accepted technology for any oil containment system. SOUTHWEST SPECIALTY COATINGS, INC. Booth #621 1102 Sharp Circle North Las Vegas, NV 89030 Phone: (702) 405-7900 Fax: (702) 405-7800 Las Vegas based Southwest Specialty Coatings, Inc., an ISO 9001:2008 Certified Contractor, performs industrial painting, coating and fireproofing projects across the United States. Each and every of our projects are performed with our core values at the forefront, Safety, Quality and Customer Service. STORAGE TANK PRODUCTS Booth #521 16347 Old Hammond Hwy Baton Rouge, LA 70816 Phone: (225) 490-0539 Fax: (225) 272-5239 Storage Tank Products, is the United States based distributor for BTE tank equipment. Offering the Complete BTE equipment line allows Storage Tank Products to provide the finest quality products available in the world today, in the United States. Our deep understanding of the Aboveground Storage Tank business gives STP the background to meet and exceed the needs of our clients, thus producing the ultimate in customer service experience.

SUMMIT ENVIRONMENTAL SERVICES Booth #428 2125 Glenview Drive Evansville, IN 47720 Phone: (812) 421-1744 Fax: (812) 421-8106 Summit Environmental Services is a turnkey contractor providing tank cleaning, remediation and 24-hr emergency response services nationwide. With some of the most experienced players in the environmental industry leading our team, we are confident that we can safely provide you with innovative solutions and the best workmanship. SUMTER TRANSPORT COMPANY Booth #522 170 S Lafayette Blvd Sumter, NC 29150 Phone: (800) 479-7496 Fax: (803) 778-0118 Since 1951 Sumter Transport Company (STC) has been transferring and transporting petroleum related products. Today STC is specializing in the removal of heavy oil sludge’s and solids from above ground tanks. We have an array of patented agitation apparatuses that enable the removal of these waste products with limited tank entry. We then recycle the waste into a useable fuel at cement kilns located throughout the US. We provide a turnkey service at a per pound price. Call Sumter Transport for a free estimate on your next sludge removal project. SUPERIOR TANK COMPANY INC. Booth #504 9500 Lucas Ranch Road Rancho Cucamonga, CA 91730 Phone: (909) 912-0580 Fax: (909) 912-0588


Superior Tank Co., Inc. manufactures and installs a complete line of Bolted Steel Storage Tanks for the Potable Water, Wastewater, Fire Protection, Rain Harvesting and Crude Oil Industries since 1984. Tank capacities range from 10,000 gallons up to 2.2 million gallons. STCI’s Tanks conform to the following standards AWWA, NFPA, FM & API Specifications. Other types of services offered are Worldwide Shipping, Engineering, Design, Fabrication, Foundation Design, Jobsite Supervisors and Turnkey Projects. T F WARREN/TARSCO Booth #514 5410 Easthampton Drive Houston, TX 77039 Phone: (281) 590-9300 Fax: (281) 590-9311 The TF Warren Companies (TARSCO, Blastech, Blastco, Brant) provide a single source solution to storage tank and terminal owners including engineering, procurement, fabrication, onsite construction, shop and field coatings, lining, and metalizing. Our services include both domestic and international maintenance/repair and new construction. TAMPA TANK INC. Booth #319 2710 5th Ave. Tampa, FL 33605 Phone: (813) 241-4261 Fax: (813) 247-3864 Tampa Tank, Inc. product line includes both shop assembled, field erected tanks and all custom plate fabrication in the US, the Caribbean, Central and South America. TANK BUILDERS, INC. Booth #502 PO Box 1527 Euless, TX 76039 Phone: (817) 510-0160 ext. 103 Fax: (817) 510-0166

NISTM’s 2013 Conference and Trade Show Program Guide 31



Tank Builders is a steel plate fabricator specializing in welded steel storage tank design, fabrication and erection. TBI’s corporate headquarters is just south of DFW airport in Euless, TX with additional fabrication facilities neat Gatesville, TX and Baird, TX. TANK ENGINEERING AND MANAGEMENT CONSULTANTS INC. Booth #317 4000 State Road 60 E Mulberry, FL 33860 Phone: (863) 354-9010 Fax: (863) 648-4988 TEAM is one of the oldest engineering firms specializing in Inspection, design and Construction Management services for the aboveground storage tank industry. That experience translates into real world solutions. TANK STORAGE MAGAZINE Booth #622 Marshall House, 124 Middleton Road Morden, Surrey, England SM4 6RW Phone: 44 (0) 203 551 5754 Fax: 44 (0) 208 687 4130 Tank Storage magazine is the terminal operator’s preferred source of information for news, data and product information relating to the oil and chemical tank terminal industry. Tank Storage magazine has recently been independently audited/certified giving its advertisers peace of mind that their marketing message is reaching the people that matter. TANKLINK, A DIVISION OF TELULAR CORPORATION Booth #230 311 S. Wacker Drive #4300 Chicago, IL 60606 Phone: (888) TANKLINK Fax: (312) 379-8310 TankLink provides tank monitoring, asset tracking and data reporting

services through a sole source combination of hardware, sensors, and software applications to deliver tank level data 24/7, available anywhere an internet connection is available. Our wireless monitoring solutions, including precise tank locating via GPS, eliminate run-outs and emergency deliveries, and improve resource planning and route optimization. TCI SERVICES, INC. (TANK CONSULTANTS, INC.) Booth #103 4333 West 21st Street Tulsa, OK 74107 Phone: (918) 583-3968 Fax: (918) 583-3966 TCI provides above ground storage tank services to both field erected (API Certified) and shop built tanks (STI and API certified). Services include inspection, repair, alteration, new construction, consulting, engineering and turnkey project management. Engineering services include evaluations such as Finite Element Analysis and Hydrotest Exemptions. Newly formed TCI-Environmental Solutions include roof drain systems, containment drain systems and contact water solutions. Offices: Tulsa (headquarters), Chicago, Houston, Henderson, KY. TEAM INDUSTRIAL SERVICES Booth #227 200 Hermann Drive Alvin, TX 77511 Phone: (651) 335-8083 Fax: (281) 331-4107 Team’s comprehensive Tank Management Programs have become the industry standard. Backed by our in-house engineering, documentation and certification services – including API 653 evaluations – Team’s on-site inspection, maintenance and repair services keep your tanks fully operational and compliant with stringent industry standards 24/7/365.

32 NISTM’s 2013 Conference and Trade Show Program Guide

TEC SERV LLC SPONSOR Booth #204 1850 Eller Dr. Ste 200 Fort Lauderdale, FL 33316 Phone: (954) 524-2809 Fax: (954) 527-8874 TEC Serv LLC is an Engineering Design and Construction Services Company specializing in the Petrochemical and Fuel Management Industry. TEC Serv designs, implements and maintains electrical, mechanical and automation systems. TECHNOSOFT INC Booth #524 11180 Reed Hartman Hwy Cincinnati, OH 45242 Phone: (513) 985-9877 Fax: (513) 985-0522 The AMETank and AMPreva software applications enable the rapid configuration, design, and detailing of aboveground shop-built and field -erected storage tanks and pressure vessels. Design calculations for storage tanks conform to API 650 and API 620. Design calculations for pressure vessels conform to ASME Section VIII Division 1. THE COOLEY GROUP Booth #410 50 Esten Avenue Pawtucket, RI 2860 Phone: (401) 721-6210 Cooley designs and manufacturers high performance flexible composites used worldwide in applications including environmental liners, water, fuel and chemical containment, signs, awnings, outdoor advertising, digital printing, military tents, single-ply roofing, roll-up doors, dock shelters, dock seals, inflatable boats and more. Cooley is dedicated to three objectives: innovation, performance, and sustainability.

15TH ANNUAL INTERNATIONAL ABOVEGROUND STORAGE TANK CONFERENCE & TRADE SHOW THE EQUITY ENGINEERING GROUP, INC. Booth #424 20600 Chagrin Blvd, Ste 1200 Shaker Heights, OH 44122 Phone: (216) 658-4752 Fax: (216) 283-6022 The Equity Engineering Group, Inc. is an engineering services provider and leader in developing industry standards and advanced technologies that help keep oil refining and petrochemical plants safe and operating at top capacity. Our focus is to help clients optimize plant safety, sustainability and profitability through proactive technologies that manage risk, maximize equipment availability and control inspection costs through a plant’s equipment lifecycle. Equity Engineering has authored worldwide industry standards for Risk-Based Inspection, Fitness-For-Service, and Materials/Corrosion disciplines, and the Company’s proprietary software is used by major companies worldwide.

Trelleborg Offshore will be exhibiting our Vapor Suppression Spheres for large atmospheric storage tanks. Also on exhibit will be Elastopipe as a non metallic piping system, PFP products suitable for the storage tank markets, Containment, LNG Spill and Sealing capabilities.

U.S. TANK PROTECTORS, INC. Booth #219 5100 Walnut Avenue Downers Grove, IL 60515 Phone: (630) 719-9754 Fax: (630) 719-9783

TRIMBLE Booth #401 10355 Westmoor Drive Westminster, CO 80021 Phone: (720) 587-4498 Fax: (720) 887-6101

Industry leader specializing in aboveground and underground storage tank Cathodic Protection design, installation, and testing services since 1989. Worldwide service coverage provided. Services include specialized CP designs for elevated temperature tanks and double bottom tanks with and without secondary containment systems. Specialized External Corrosion Direct Assessment (ECDA) services for aboveground storage tanks, during tank internal inspections. Contact Lou at

The storage of petroleum products requires strict governance to provide accurate transactions and to ensure worker and overall terminal safety. Trimble solutions provide accurate location information to increase productivity of terminal changes and to quickly determine tank calibration. Location information also allows tanks and containment features to be structurally monitored and managed throughout their lifecycle.

TKDA Booth #212 4631 Woodland Corporate Blvd, Ste 303 Tampa, FL 33614 Phone: (813) 933-6025 Fax: (813) 935-2223

TUV RHEINLAND INDUSTRIAL SOLUTIONS Booth #605 8181 Broadmoor SE Caledonia, MI 49316 Phone: (800) 748-0208 Fax: (616) 891-3565

TKDA provides specialized Storage Tank expertise, Engineering, Construction Services & Design Build Services to clients in the terminal, pipeline, aviation, industrial and military markets with a superior level of quality and service.

TRIS is a full service testing, inspection and certification company providing both field and laboratory inspection services, which include all NDT methods for QA/QC functions and physical property testing capabilities. TRIS tank inspections are performed in accordance to API & STI Recommendations by certified technicians. Specialty equipment: MFE, Tank Crawlers and phased array UT.

TRELLEBORG OFFSHORE Booth #614 290 Forbes Blvd Mansfield, MA 2048 Phone: (774) 719-1433 Fax: (774) 719-1410


ULTIMATE LININGS Booth #601 6630 Roxburgh Dr. #175 Houston, TX 77041 Phone: (713) 466-0302 Fax: (713) 937-0065 Ultimate Linings is an industry leader in providing long lasting coating solutions with superior quality, application technology, and technical support. We are committed to supplying advanced products that solve our customers’ problems in an ever changing and challenging market place. Whether it is an industrial, OEM, or a retail bed liner application...Ultimate Linings has the right material and support. VACONO AMERICA LLC SPONSOR Booth #122 1163 E 40th Street, Ste 301 Cleveland, OH 44114 Phone: (216) 938-7428 Fax: (216) 938-7460

NISTM’s 2013 Conference and Trade Show Program Guide 33



Vacono is a world leading aluminum floating deck and geodesic dome roof manufacturer for the Above Ground Storage Tank Industry including petroleum products, water, and waste water. Vacono also has geodesic dome roof applications focused on bulk storage and architectural design. Vacono has been in business for over 35 years and originates from the Aluminum Rheinfelden Company that was founded over 100 years ago. Today, Vacono has offices in Germany and the United States to support the aluminum floating roof and aluminum geodesic dome roof products we design and manufacture. Vacono is customer and quality driven and is more than capable of design accommodations to meet any criteria. VALVE CONCEPTS Booth #223 607 W. 15th Street Ellsworth, KS 67439 Phone: (785) 472-4461 Fax: (785) 472-3539 Valve Concepts manufactures self-contained, pilot-operated tank blanketing and vent valves. Providing a complete line of tank manifolds allowing blanketing and venting. VEOLIA ES INDUSTRIAL SERVICES, INC. Booth #331 2525 South Shore Blvd, Ste 410 League City, TX 77573 Phone: (713) 307-2160 Fax: (713) 307-7622

technology. Veolia also offers liquids/solids separations and waste minimization and disposal services. Veolia provides tank & separations services throughout the US and Canada. Visit our website to learn more. VERTEX ENERGY Booth #409 SPONSOR 1331 Gemini, Ste 250 Houston, TX 77058 Phone: (281) 486-4182 Fax: (281) 486-0217 Vertex Energy is a leader in the aggregation, recycling and processing of distressed hydrocarbon streams thereby reducing America’s reliance on foreign oil. Our focus is on creating value through a variety of strategies and technologies that facilitate the re-refining of used oil and off specification commercial chemical products into higher value commodities. VISTA PRECISION SOLUTIONS, INC. SPONSOR Booth #107 1355 Columbia Park Trail Richland, WA 99352 Phone: (509) 737-1380 Fax: (509) 737-1383 Vista Precision Solutions provides integrity assessment and detection products and services for bulk storage tanks, pipelines and airport hydrant refueling systems. Certified for fuel systems of any size. Stand-alone or fully integrated with pump/valve control systems.

Veolia ES Industrial Services National Tank & Separations Services offers comprehensive tank cleaning solutions utilizing robotic, manless entry cleaning equipment and automated circulation 34 NISTM’s 2013 Conference and Trade Show Program Guide

WILLBROS DOWNSTREAM - TANK SERVICES Booth #430 4300 East 36th Street North Tulsa, OK 74115 Phone: (918) 556-3600 Fax: (918) 556-3680 Willbros Tanks Service Company provides cost-effective solutions for tank projects. Services include: New Field Erected Storage Tanks, Tank Maintenance and Repairs, Cone Roofs, Dome and Structure Replacement, Floating Roof Installation/ Repairs, Floating Roof Seals, Secondary Containment Bottoms, and complete EPC Turnkey Projects. WILLIAMETTE VALLEY COMPANY Booth #606 1075 Arrowsmith Street Eugene, OR 97402 Phone: (541) 484-9621 Fax: (541) 284-2096 Providing cutting edge formulations for infrastructure repair and protection found in Transportation, Industrial and General Construction applications. WVCO capabilities include: Innovative Materials Solutions, Product Stewardship, Customized Application Equipment, and On-site Technical Support. Concrete Repair and protection Materials. Polyurea, Polyurethane & Polyaspartic Coatings.

NISTM’s 2013 Conference and Trade Show Program Guide 35

NISTM The National Institute for Storage Tank Management

PO Box 26008 | Tampa, FL 33623 | 800.827.3515 | Fax 813.870.6824 |

See You Next Year 16th Annual

International Aboveground Storage Tank Conference & Trade Show

April 2-4, 2014 Orlando, Florida

36 NISTM’s 2013 Conference and Trade Show Program Guide

15th Annual International Aboveground Storage Tank Conference & Trade Show PROGRAM GUIDE  

Conference & Trade Show Program Guide that includes the 3-day agenda, list of exhibitors, floor plan and information on the co-located event...

Read more
Read more
Similar to
Popular now
Just for you