Portfolio_Architectural Draftsperson by niklesh

ARCHITECTURE

PORTFOLIO

SRINIKLESH BALACHANDRAN

Phone no : +61 468 444 556 / +91 9788223322

E-Mail : sriniklesh.bala@gmail.com

“

The notion that ‘everything that exists now was once someone’s imagination’ fuels my passion and continuously inspires me to delve into the theories that underpin innovation. Through my architectural journey, I have come to realize that being an architect entails more than just designing and planning; it involves comprehending the needs of end users and enriching their experiences. ”

Selection of Projects

INSULATION REQUIREMENTS. TAPE WALL AND NOTES: CONSTRUCTION CHECKED WITH THE PRINCIPAL CONSULTANT. PRINCIPAL CONSULTANTS DETAILS Form Architects Unit Trust T/A Form Architects Conrad Ramakers(AIA) Nominated Architect for N6237 V18294 Q4751 W2660 T892 S3452 ANACONDA HARRIS LIVING DESIGN PROJECTS INGERSOLE DRIVE. KELSO, NSW 2795 CONSTRUCTION ISSUE WALL SECTIONS -SHEET NB16.11.22INITIAL ISSUE CONTRACTOR SHOULD VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK. IF A DISCREPANCY IS FOUND BETWEEN FIGURED DIMENSIONS AND SCALED DIMENSIONS, IT SHALL BE CHECKED WITH THE PRINCIPAL CONSULTANT. THIS DOCUMENT IS NOT TO BE USED FOR CONSTRUCTION UNLESS SIGNED AND ISSUED FOR CONSTRUCTION COPYRIGHT FORM ARCHITECTS. COPYING OR REPRODUCTION OR USE OF THIS DESIGN OR DRAWING IN WHOLE OR PART IS PROHIBITED WITHOUT THE WRITTEN CONSENT OF FORM ARCHITECTS SCALE DRAWN CLIENT PROJECT DRAWING CHECKED APPROVED DRAWING NO. REV. COPYRIGHT FORM4 ARCHITECTS. COPYING, REPRODUCTION OR USE OF THIS DESIGN OR DRAWING IN WHOLE OR PART IS FORM4 ARCHITECTS. CONTRACTOR SHOULD VERIFY ALL DIMENSIONS ON SITE BEFORE FIGURED DIMENSIONS AND SCALED DIMENSIONS, SHALL BE CHECKED WITH THE PRINCIPAL CONSULTANT. THIS DOCUMENT IS NOT TO BE USED FOR CONSTRUCTION UNLESS PRINCIPAL CONSULTANTS DETAILS Form Architects Unit Trust T/A Form Architects ABN: 37 992 244 025 Conrad Ramakers(AIA) Nominated Architect for Registrations: N6237 V18294 Q4751 W2660 T892 S3452 G KFC EASTERN CREEK LAMSTAN GROUP PTY LTD ROOTY HILL ROAD SOUTH EASTERN CREEK NSW 2766, AUSTRALIA CONSTRUCTION ISSUE 3D PERSPECTIVES -SHEET 01 FT MH/GM CR A900 20-103/ N.T.S 3D PERPECTIVES : DAY VIEW BYDATEAMENDMENT REV FT22.02.21Revised 3d view C FT05.03.21Amended finishes D FT28.04.21 Revised Front and Drive-thru Portal RK31.05.21Elevation revised FT24.03.22Revised renders G G COPYRIGHT KFC PTY LTD. COPYING, REPRODUCTION OR USE OF THIS DESIGN OR DRAWING IN WHOLE OR PART IS PROHIBITED WITHOUT THE WRITTEN CONSENT OF KFC PTY LTD. CONTRACTOR SHOULD VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK. IF A DISCREPANCY IS FOUND BETWEEN FIGURED DIMENSIONS AND SCALED DIMENSIONS, IT SHALL BE CHECKED WITH THE PRINCIPAL CONSULTANT. THIS DOCUMENT IS NOT TO BE USED FOR CONSTRUCTION UNLESS SIGNED AND ISSUED FOR CONSTRUCTION PRINCIPAL CONSULTANTS DETAILS Form Architects Unit Trust T/A Form 4 Architects ABN: 37 992 244 025 Conrad Ramakers(AIA) Nominated Architect for Registrations: N6237 V18294 Q4751 W2660 T892 S3452 CLIENT PROJECT KFC MAITLAND DA FAF1 ISSUE LINCRON PTY LTD 02EXISTING PERSPECTIVE SCALE -N.T.S@A1 BYDATEAMENDMENT REV KS18.07.22INITIAL ISSUE A THIS DOCUMENT NOT TO BE USED FOR CONSTRUCTION UNLESS SIGNED AND ISSUED FOR CONSTRUCTION Form Architects Unit Trust T/A Form Architects Conrad Ramakers(AIA) Nominated Architect for Registrations: CLIENT PROJECT DRAWING REPRODUCTION OR USE OF THIS DESIGN OR DRAWING WHOLE OR PART PROHIBITED WITHOUT THE WRITTEN CONSENT FORM ARCHITECTS KFC MORISSET 2/5-11 GATEWAY BOULEVARD, MORISSET NSW 2264 FAF1 ISSUE SANDYSHORE PTY LTD BYDATEAMENDMENT REV NB16.03.23INITIAL ISSUE HA19.04.23ELEVATION REVISEDB Starbucks | Unanderra KFC Maitland KFC Eastern Creek KFC Morisset | Gateway Boulevarde Anaconda & Harris scarfe| Kelso KFC Port Macquarie 04 11 21 17 25

S T E D A R Y -26.50m 7000 T E B O A R Y -44.42m CARPARKS 6 26 600 - 3500 385 1800 11500 2960 4000 300 2000 3500 1720 A P K 0 01 02 03 04 05 06 07 R 00 00 2500 D VE- H 8500 6000 5500 2500 100mm WIDE WHITE PAINTED CARPARK LINE AND ROADWAY LANES EXTEND OF LANDSCAPED AREA WHITE 'SYMBOL OF ACCESS' 900 HIGH ON BLUE RECTANGLE 1200SQ. TO COMPLY WITH AS1428.1 GENERAL KEY: PROPOSED KFC BUILDING WHITE PAINTED DIRECTIONAL ARROW. 2000 1000 KERBS. DRIVE THRU SYSTEM DETECTION LOOP 300 EXISTING BUILDING TO BE DEMOLISHED. SCALE DRAWN PRINCIPAL CONSULTANTS DETAILS RAMAKERS ARCHITECTS PTY LTD ABN 27 002 167 419 SUITE 107-115 PACIFIC HIGHWAY, HORNSBY NSW 2077 TELEPHONE: (02) 9987 1888.EMAIL:admin@ramakers.com.au Conrad Ramakers (AIA) Nominated Architect for Registration, N6237 V18294 Q4751 W2660 T892 S3452 CLIENT PROJECT DRAWING CHECKED APPROVED DRAWING NO. REV. COPYRIGHT RAMAKERS ARCHITECTS PTY LTD. COPYING OR CONSENT OF RAMAKERS ARCHITECTS PTY LTD. CONTRACTOR SHOULD VERIFY ALL DIMENSIONS ON SITE BEFORE FIGURED DIMENSIONS AND SCALED DIMENSIONS, SHALL BE CHECKED WITH THE PRINCIPAL CONSULTANT. A STARBUCKS UNANDERRA A004 179 PRINCES HIGHWAY UNANDERRA NSW 2526 PRELIMINARY FOR DISCUSSION ONLY PROPOSED SITE PLAN (WITH SURVEY) NB MH CR 21-124 LEYTON PROPERTY BYDATE AMENDMENT REV NB16.06.21Initial Issue NOTES CONSTRUCTION C.02 CONFIRM EXACT SITE DIMENSIONS PRIOR TO COMMENCING CONSTRUCTION. C.04 KERB RAMPS SHOWN TO BE AT MAXIMUM GRADIENT OF IN AND SHALL FULLY COMPLY WITH THE REQUIREMENTS OF AUSTRALIAN STANDARD AS1428.1. NOTE GENERAL DRAWING, AN OVERALL INDICATIVE SITE AREA OF 1277.50m². G.02 THE SITE AREA REQUIRED TO SUIT THE DEVELOPMENT WILL VARY SUBJECT TO AUTHORITY REQUIREMENT FOR CARPARK NUMBERS, 1:100@A1; 1:200@A3 ASPHALT OR BLACK CONCRETE BLACK CONCRETE LANDSCAPE LOT NUMBER LOT LOT 05 DEPOSITED PLAN NUMBER DP524796 DEPOSITED PLAN NUMBER DP431192 PROPERTY DESCRIPTION: WHITE PAINTED LINE MARK CUSTOMERS TOP POINT DELIVERY SERVICE BAY PWD CAFE SEATING OFFICE WAIT BAY 15 01 02 BOL ENTRY EXIT CENTRELINE DRIVE THRU WINDOW WHITE PAINTED LINE MARK 200mm WIDE TO INDICATE CUSTOMERS TOP POINT ORDER POINTS DT-PAY PICKUP POINT ORDER POINTS ASPHALT OR BLACK CONCRETE BLACK CONCRETE STARBUCKS OUTDOOR SEATING 30m²

Click icons to access Social media.

STARBUCKS UNANDERRA

The facility has been meticulously designed and planned to maximize operational efficiency. The task involved creating a preliminary site layout that integrates the client’s specifications. We assessed the ingress and egress points to enhance the traffic movement within the premises, utilizing a simulated truck path to determine the most efficient route. We also ensured compliance with parking standards and skillfully incorporated design elements for the drive-thru section.

LOCATION:

179 Princes Highway Unanderra NSW 2526

DEVELOPED FOR: Leyton Property

SKILLS APPLIED: Revit Model Management, Planning and Concept Design.

KEY ITEMS HANDLED:

Site Plans, Parking layout modeled, Site modeled with survey drawings and Model management.

Sriniklesh Balachandran - Portfilio

S T E B O U N D A R Y -26.50m 7000 S T E B O U N D A R Y -44.42m S I T E B O U N D A R Y -32.14m

C A R P A R K 2 x 2600 600 600 D R V ET H R U 3500 385 1800 11500 2960 4000 300 2000 3500 1720 CAR PARK 5 x 2600 01 02 03 04 05 06 07 R=6000 R=6000 2500 DR VE-THRU 3500 600 8500 6000 5500 2500 NOTES CONSTRUCTION C.01 FOR BUILDING DIMENSIONS REFER TO THE FLOOR PLAN. C.02 CONFIRM EXACT SITE DIMENSIONS PRIOR TO COMMENCING CONSTRUCTION. C.03 MERGE ALL CURVED SECTIONS OF ROAD INTO STRAIGHT SECTIONS. C.04 KERB RAMPS SHOWN TO BE AT A MAXIMUM GRADIENT OF 1 IN 8 AND SHALL FULLY COMPLY WITH THE REQUIREMENTS OF AUSTRALIAN STANDARD AS1428.1. NOTE : GENERAL G.01 THE APPROXIMATE SITE BOUNDARY AS INDICATED ON THIS DRAWING, AN OVERALL INDICATIVE SITE AREA OF 1277.50m². G.02 THE SITE AREA REQUIRED TO SUIT THE DEVELOPMENT WILL VARY SUBJECT TO AUTHORITY REQUIREMENT FOR CARPARK NUMBERS, SITE SETBACKS ETC.. ASPHALT OR BLACK CONCRETE BLACK CONCRETE LANDSCAPE WHITE PAINTED LINE MARK 200mm WIDE TO INDICATE CUSTOMERS TOP POINT DELIVERY SERVICE BAY PWD BAR CAFE SEATING BOH OFFICE REFUSE WAIT BAY 15 01 02 03 BOL ENTRY EXIT CENTRELINE DRIVE THRU WINDOW WHITE PAINTED LINE MARK 200mm WIDE TO INDICATE CUSTOMERS TOP POINT ORDER POINTS DT-PAY / PICKUP POINT ORDER POINTS ASPHALT OR BLACK CONCRETE BLACK CONCRETE STARBUCKS 230m² OUTDOOR SEATING 30m² Starbucks Unanderra

CARPARKS 6x2600

KFC EASTERN CREEK

The Client’s objective was to establish a Quick Service Restaurant (QSR) in proximity to the Great Western Highway within the Eastern Creek suburb. A pivotal demand was the creation of a dual order point, aimed at optimizing the flow of vehicles in the drive-thru lane. Given the limited space available on the site, it was imperative to devise an efficient layout. During the construction phase, we undertook the creation of comprehensive drawings encompassing multiple aspects of the site. Furthermore, I engaged in obtaining approval certificates from the certifying authority and assumed responsibilities related to contract administration in the later stages of the project.

PERPECTIVES : DAY VIEW

LOCATION:

Rooty Hill Road South Eastern Creek NSW 2766

DEVELOPED FOR:

Lamstan Group PTY LTD

SKILLS APPLIED:

Detailed Developed, Construction Documentation, OC Approve and Certification.

KEY ITEMS HANDLED:

Detail drawings, Joinery and wall details, Site works details, Approve and certification from authorities.

Sriniklesh Balachandran - Portfilio

3D PERPECTIVES G SCALE DRAWN CLIENT PROJECT DRAWING CHECKED APPROVED DRAWING NO. COPYRIGHT FORM4 ARCHITECTS. COPYING, USE OF THIS DESIGN OR DRAWING IN PROHIBITED WITHOUT THE WRITTEN FORM4 ARCHITECTS. CONTRACTOR SHOULD VERIFY ALL DIMENSIONS COMMENCING WORK. IF A DISCREPANCY FIGURED DIMENSIONS AND SCALED DIMENSIONS, CHECKED WITH THE PRINCIPAL THIS DOCUMENT IS NOT TO BE USED FOR SIGNED AND ISSUED FOR CONSTRUCTION PRINCIPAL CONSULTANTS DETAILS Form 4 Architects Unit Trust T/A Form ABN: 37 992 244 025 Conrad Ramakers(AIA) Nominated Architect N6237 V18294 Q4751 W2660 T892 S3452 KFC EASTERN CREEK LAMSTAN GROUP ROOTY HILL ROAD SOUTH EASTERN CREEK NSW 2766, AUSTRALIA CONSTRUCTION 3D PERSPECTIVES 01 FT MH/GM A900 20-103/ 01AFRONT PERPECTIVE(DAY VIEW) SCALE -N.T.S 02ADRIVE-THRU (DAY VIEW) SCALE -N.T.S 3D

BYDATEAMENDMENT FT22.02.21Revised 3d view FT05.03.21Amended finishes FT28.04.21 Revised Front Portal RK31.05.21Elevation revised FT24.03.22Revised renders G KFC Eastern Creek

FRONT PERPECTIVE(DAY VIEW)

AND SHALL HAVE A SLIP RESISTANT SURFACE. RAISED PAVEMENT MARKERS SHALL NOT BE USED FOR SPACE DELINEATION.

PAVEMENT MARKINGS SHALL BE PROVIDED AS FOLLOWS:

1. LINEMARKING

1.1. DEDICATED PARKING SPACES SHALL BE OUTLINED WITH UNBROKEN LINES 80 TO 100mm WIDE ON ALL SIDES EXCEPTING ANY SIDE DELINEATED BY A KERB, BARRIER OR WALL.

2. SHARED AREAS SHALL BE MARKED AS FOLLOWS:

2.1 WALKWAYS WITHIN OR PARTLY WITHIN A SHARED AREA SHALL BE MARKED WITH UNBROKEN LONGITUDINAL LINES ON BOTH SIDES OF THE WALKWAY EXCEPTING ANY SIDE DELINEATED BY A KERB, BARRIER OR WALL.

2.2. OTHER VACANT NON-TRAFFICKED AREAS, WHICH MAY BE INTENTIONALLY OR UNINTENTIONALLY OBSTRUCTED (E.G. BY UNINTENDED PARKING), SHALL BE OUTLINED WITH UNBROKEN LINES 80 TO 100mm WIDE ON ALL SIDES EXCEPTING ANY SIDE DELINEATED BY A KERB, BARRIER OR WALL, AND MARKED WITH DIAGONAL STRIPES 150 TO 200mm WIDE WITH SPACES 200mm TO 300mm BETWEEN STRIPES. THE STRIPES SHALL BE AT AN ANGLE OF 45 ±10 DEGREES TO THE SIDE OF THE SPACE.

2.3. NO SHARED AREA MARKINGS SHALL BE PLACED IN TRAFFICKED AREAS.

2.4. ALL LINE MARKING MUST BE NON SLIP.

NOTES:

CONSTRUCTION

C.04

RAMP DETAILS ARE INDICATIVE ONLY. PRINCIPLE CONSULTANTS SHALL CHECK AND CONFIRM COMPLIANCE WITH THE LATEST VERSION OF AS 1428.1.

ENGINEER SHALL MODIFY THE DETAILS AS NECESSARY TO SUIT SITE SPECIFIC REQUIREMENTS. KERB

KERBS AND CHANNELS PLUS CONCRETE PAVEMENTS SHALL BE BLACK CONCRETE UNLESS NOTED OTHERWISE.

CENTRES.

1.0 PITS IN AREAS LIKELY TO CARRY PEDESTRIAN TRAFFIC (IE CARPARK AREAS) SHALL HAVE GRATES WITH GALVANISED HEEL GUARDS.

3.0

4.0 KERBS

C.05 NB 10.03.22 INITIAL ISSUE A PROJECT DRAWING DRAWING No. REV CLIENT CONTRACTOR SHOULD VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK. IF A DISCREPANCY IS FOUND BETWEEN FIGURED DIMENSIONS AND SCALED DIMENSIONS, IT SHALL BE CHECKED WITH THE PRINCIPAL CONSULTANT. BY DATE AMENDMENT REV THIS DOCUMENT IS NOT TO BE USED FOR CONSTRUCTION UNLESS SIGNED AND ISSUED FOR CONSTRUCTION COPYRIGHT FORM4 ARCHITECTS.COPYING, REPRODUCTION OR USE OF THIS DESIGN OR DRAWING IN WHOLE OR PART IS PROHIBITED WITHOUT THE WRITTEN CONSENT OF FORM4 ARCHITECTS. CHECKED SCALE DRAWN APPROVED PRINCIPAL CONSULTANTS DETAILS KFC EASTERN CREEK ROOTY HILL ROAD SOUTH EASTERN CREEK, NSW 2766, AUSTRALIA LAMSTAN GROUP PTY LTD Form 4 Architects Unit Trust T/A Form 4 Architects ABN: 37 992 244 025 Conrad Ramakers(AIA) Nominated Architect for Registrations: N6237 V18294 Q4751 W2660 T892 S3452 CONSTRUCTION ISSUE SITE WORKS DETAILS NB AS SHOWN GM CR 20-103-A009 A KFC Eastern Creek

2.0 GRATED DRAINS ARE GENERALLY DISCOURAGED HOWEVER, WHERE USED REQUIRE LOCK-DOWN CAST IRON GRATES WITH HEEL GUARDS.

5 Sriniklesh Balachandran - Portfilio 300 125 600 275 R75 R225 190 110 150 150 450 600 125 150 275 NORMAL KERB LINE AND FACE OF KERB IF VERTICAL TYP. 20 RAD TYP. 5 RAD TYP. 5 RAD TYP. 40 100 MIN BASE OR SUBBASE TO CONTINUE PAST KERB TYP. 150 450 600 125 125 275 MAY BE USED IN PLACE OF KERB & GUTTER IF APPROVED BY PRINCIPLE CONSULTANT 150 150 REINFORCEMENT TO ENGINEERS DETAIL CARRY ALL PAVEMENT JOINTS THROUGH KERB. CJ IF REQUIRED 150 SCALE DETAIL: INTEGRAL KERB DETAIL- 1:10 SCALE DETAIL: KERB & GUTTER SW COLLECTION- 1:10 SCALE DETAIL: KERB & GUTTER (TYPICAL ONSITE U.N.O.)- 1:10 SCALE DETAIL: ROLLOVER KERB & GUTTER- 1:10 1500 MIN. 1520 MAX. UP UP RAMP UP MAX 1:8 1000 MIN MINIMUM CLEAR ZONE OBSTRUCTION IE DOORS 1330 MIN 190 MAX KERB TO TAPER CLEAR ZONE 2000 MIN. SCALE ELEVATION- 1:50 SCALE FOOTPATH ENTRY RAMP PLAN- 1:50 45° 45° 1200 MIN. 1000 MIN. SELECTED FINISH RAISED MESH IN A CURVE REINFORCEMENT AND JOINTS TO ENGINEERS DETAILS 75 300 SCALE DETAIL ROLLOVER ISLAND- 1:10 2400 2400 1200 1200 800-1000 ACCESSIBLE CAR SPACE SHARED AREA FLEXIBLE BOLLARD 1300mm HIGH ABOVE GROUND LEVEL. RIGHT HAND ACCESSIBLE CAR PARKING SPACES IN ACCORDANCE WITH AS2890.6 5400 800 SPACE IDENTIFICATION EACH DEDICATED SPACE SHALL BE IDENTIFIED BY MEANS OF A WHITE SYMBOL OF ACCESS IN ACCORDANCE WITH AS 1428.1 BETWEEN 800mm AND 1000mm HIGH PLACED ON A BLUE RECTANGLE WITH NO SIDE MORE THAN 1200mm PLACED AS A PAVEMENT MARKING IN THE CENTRE OF THE SPACE BETWEEN 500mm AND 600mm FROM ITS ENTRY POINT AS ILLUSTRATED. SPACE DELINEATION PAVEMENT MARKINGS SPECIFIED IN ITEMS (A) AND (B) OF THIS CLAUSE SHALL BE YELLOW

3.1. MINIMUM HEIGHT 1300MM 3.2. RECOMMENDED COLOUR BLUE TO CONTRAST AGAINST YELLOW LINE MARKING. 3.3. RECOMMEND FLEXIBLE BOLLARDS TO REDUCE MOTOR VEHICLE DAMAGE. KERB & CHANNEL OR LINE MARKING TO THIS END 500600 SCALE ACCESSIBLE CAR PARKING SPACES - TYP.- 1:50 1500 MIN 1500 MIN 1520 MAX 1200 1000 MIN LANDSCAPED AREA OBSTRUCTION MINIMUM CLEAR ZONE CLEAR ZONE RAMP UP MAX 1:8 190 MAX KERB TO TAPER WITH RAMP KERB TO TAPER WITH RAMP SCALE ELEVATION- 1:50 SCALE FOOTPATH RAMP PLAN- 1:50 THE FOLLOWING DETAILS ARE PROVIDED FOR GENERAL GUIDANCE ONLY. PRINCIPLE CONSULTANTS SHALL CONFIRM KFC & AUTHORITY REQUIREMENTS PRIOR TO USING AND OR MODIFY AS NECESSARY. THE PRINCIPLE CONSULTANTS CIVIL STRUCTURAL

3. BOLLARDS: C.01 C.02 C.03

PITS SHALL HAVE HEAVY DUTY CAST IRON GRATES GENERALLY.

NOTES: STORMWATER PITS

THE LOAD CLASS FOR GRATES SHALL BE NOMINATED BY THE PRINCIPLE CONSULTANTS CIVIL STRUCTURAL ENGINEER.

SHALL HAVE RULED OR SAW CUT JOINTS AT 2000

NOTE:

PROVIDE 'HARDIE BREAK' THERMAL STRIPS FROM JAMES HARDIE TO CREATE A THERMAL BREAK BETWEEN THE STEEL STUD FRAMING AND THE EXOTEC CLADDING.

6 Sriniklesh Balachandran - Portfilio EXOTEC® INTERMEDIATE TOP HAT EXOTEC® TOP HAT NOM. JOINT SELECTED COATING EXOTEC GASKET SNAP STRIP STEEL FRAMED WALL BY NOMINATED STEEL FABRICATOR VAPOUR PERMEABLE MEMBRANE 3mm CONTINUOUS SEALANT FILLET TO LOWER PANEL AND WITHIN ROLL FOR 50mm AT EACH END VAPOUR PERMEABLE MEMBRANE EPOXY AND THEN JAMES HARDIE BASE COAT FILLER SANDED SMOOTH INTERNAL EXOTEC ® FACADE PANEL 1mm CORROSION RESISTANT METAL ANGLE 100 NOM. TYP. EXOTEC ® FACADE PANEL 1200 EXOTEC PANEL WIDTH 10 10 40 MIN. 40 MIN. NOTE: REFER TO EXOTEC ® FACADE PANEL AND FIXING SYSTEM TECHNICAL SPECIFICATION. 10 INTERMEDIATE JH TOP HAT VAPOUR PERMEABLE MEMBRANE EXOTEC ® FACADE PANEL EXTERNAL SCALE PLAN DETAIL (TYPICAL)- 1:2 EXPRESSED JOINT VERTICAL SCALE PLAN DETAIL EXOTEC 1 A101 1:2 TYPICAL CORNER JOINTS EPOXY AND THEN JAMES HARDIE BASE COAT FILLER SANDED SMOOTH TOP HAT FIXING TO STUDS. EXOTEC® FACADE PANEL KEEP FASTENER ABOVE EXOTEC ® BACKING STRIP EXOTEC ® BACKING STRIP CONTINUOUS HORIZONTAL SEALANT BEAD 6MM NOM. DIAMETER 3MM CONTINUOUS SEALANT FILLET TO LOWER PANEL AND WITHIN ROLL FOR 50MM AT EACH END BOND BACKING STRIP TO PANEL WITH CONTINUOUS POLYURETHANE SEALANT 6MM NOM. DIAMETER EXOTEC ® FACADE PANEL EXOTEC ® TOP HAT OR INTERMEDIATE JH TOP HAT VAPOUR PERMEABLE MEMBRANE APPLY 6MM DIAMETER SEALANT BEAD ALONG THE BACKING STRIP ALONG THE EXPRESSED JOINT EPOXY AND THEN JAMES HARDIE BASE COAT FILLER SANDED SMOOTH EPOXY AND THEN JAMES HARDIE BASE COAT FILLER SANDED SMOOTH SCALE SECTION DETAIL : EXOTEC (TYPICAL)- 1:2 EXPRESSED JOINT HORIZONTAL 100 NOM. TYP. 100 NOM. TYP. 10 NOM. TYP. SCALE PLAN DETAIL - WINDOW JAMB (TYPICAL) 2 A101 1:2 LYSAGHTS 305 LONGLINE WALL CLADDING INSTALLED VERTICALLY WINDOW EP15841 FLASHING BY CLADDING SUPPLIER INTERNAL EXTERNAL R0.2 THERMAL BREAK HARDIEBREAK OR EQUAL TO SECTION J REQUIREMENT SQUASH FOLD APPROX. 10MM COLORBOND STEEL CORNER FLASHING MOULDING STYLE WALL FRAME BY STEEL FABRICATOR EXTERNAL INTERNAL R0.2 THERMAL BREAK HARDIEBREAK OR EQUAL TO SECTION J REQUIREMENT LYSAGHTS 305 LONGLINE WALL CLADDING INSTALLED VERTICALLY 65 65 SELECTED WALL FINISH ON INTERNAL WALL LINING SCALE PLAN DETAIL - EXTERNAL CORNER (TYPICAL)- 1:2 ABOVE & BELOW WINDOWS A NB 17.03.22 INITIAL ISSUE PROJECT DRAWING DRAWING No. REV CLIENT CONTRACTOR SHOULD VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK. IF A DISCREPANCY IS FOUND BETWEEN FIGURED DIMENSIONS AND SCALED DIMENSIONS, IT SHALL BE CHECKED WITH THE PRINCIPAL CONSULTANT. BY DATE AMENDMENT REV THIS DOCUMENT IS NOT TO BE USED FOR CONSTRUCTION UNLESS SIGNED AND ISSUED FOR CONSTRUCTION COPYRIGHT FORM4 ARCHITECTS.COPYING, REPRODUCTION OR USE OF THIS DESIGN OR DRAWING IN WHOLE OR PART IS PROHIBITED WITHOUT THE WRITTEN CONSENT OF FORM4 ARCHITECTS. CHECKED SCALE DRAWN APPROVED PRINCIPAL CONSULTANTS DETAILS KFC EASTERN CREEK ROOTY HILL ROAD SOUTH EASTERN CREEK, NSW 2766, AUSTRALIA LAMSTAN GROUP PTY LTD Form 4 Architects Unit Trust T/A Form 4 Architects ABN: 37 992 244 025 Conrad Ramakers(AIA) Nominated Architect for Registrations: N6237 V18294 Q4751 W2660 T892 S3452 CONSTRUCTION ISSUE EXOTEC CLADDING & METAL CLADDING DETAILS NB 1:2@A1;1:4@A3 GM20-103-A406 A C.01 ALL EXTERNAL WALL CLADDING SHALL BE INSTALLED STRICTLY IN ACCORDANCE WITH THE MATERIAL MANUFACTURES WRITTEN SPECIFICATIONS AND INSTRUCTIONS TO ENSURE: - A WEATHER & VERMIN/ INSECT PROOF LINING IS ACHIEVED. - FULL WARRANTY COVERAGE FOR THE LINING SYSTEM IS OBTAINED. NOTE CONSTRUCTION

KFC Eastern Creek

REFER TO CEMINTEL 'BARESTONE' DESIGN & INSTALLATION GUIDE FOR MORE DETAILS & TECHNICAL SPECIFICATION.

7 Sriniklesh Balachandran - Portfilio AIR BARRIER SEALED AT ALL JUNCTIONS CEMINTEL TOP HAT NOM. JOINT FASTENER (RIVET OR SCREW) CEMINTEL BARESTONE FACADE PANEL EXPRESS WALL VERTICAL GASKET STEEL FRAMED WALL BY NOMINATED STEEL FABRICATOR VAPOUR PERMEABLE MEMBRANE 1200 CEMINTEL BARESTONE PANEL WIDTH 8-20mm 8-20mm 40 40 NOM. JOINT 40 40 EXPRESS WALL INTERMEDIATE TOP HAT INTERNAL EXTERNAL SCALE PLAN DETAIL CEMINTEL BARESTONE (TYPICAL) 4 A101 1:2 EXPRESSED JOINT VERTICAL

CEMINTEL RIGID AIR BARRIER INTERNAL INTERMEDIATE TOP HAT REVERSED CEMINTEL TOP HAT 100 MAX. CEMINTEL BARESTONE PANEL 8-20mm TYP. FLASHING ANGLE BY OTHERS

(RIVET OR SCREW) CEMINTEL BARESTONE PANEL FASTENER (RIVET OR SCREW) SUPPORT FRAMING TO ENGINEER'S DETAILS 1mm CORROSION RESISTANT METAL ANGLE 40 40 EXTERNAL WALL FRAME BY STEEL FABRICATOR REFUSE AREA 9mm CFC WALL LINING, PAINT FINISH. PROFILED CLOSED-CELL INFILL ROLLER SHUTTER DOOR GUIDE 6mm GALVANISED FOLDED METAL GUARD TO SIDES AND TOP OF REFUSE AREA ROLLER SHUTTER DOOR OPENING. DRILL 6mm Ø DRAINAGE HOLES IN HEAD @ 300mm CENTERS.

GAP 5-10mm GAP

TOP HAT SCALE PLAN DETAIL : CEMINTEL

JAMB 3 A101 1:2 TYPICAL CORNER JOINT EXTERNAL PARAPET PITCH FALL TO INSIDE FACE OF PARAPET VAPOUR PERMEABLE SARKING FRAMING BY STEEL FRAME FABRICATOR. CEMINTEL TOP HAT LYSAGHTS MINI ORB LINING LAID VERTICALLY COLORBOND FINISH PARAPET CAPPING WITH SEALED JOINTS CORRESPONDING WITH JOINTS IN THE FACADE TYPICAL. GRADED TIMBER PACKER, SCREW FIXED TO PARAPET FRAME TYPICAL 5400 5380 HIDDEN CLIP FIXING 50 25 100 2° 25 5mm SOLID SPACER CEMINTEL BARESTONE FACADE PANEL CEMINTEL INTERMEDIATE EXPRESS WALL TOP HAT AIR BARRIER SEAL AIR BARRIER TO FRAMING SCALE SECTION DETAIL : CEMINTEL BARESTONE CAPPING 5 A400 1:2 TYPICAL PARAPET CAPPING DETAIL HORIZONTAL JOINT CEMINTEL EXPRESS WALL BACKING STRIP SIKAFLEX-11FC ADHESIVE (OR SEALANT FILLED HORIZONTAL JOINT) CEMINTEL INTERMEDIATE TOP HAT VAPOUR PERMEABLE MEMBRANE CEMINTEL BARESTONE FACADE PANEL 100 NOM. TYP. 100 NOM. TYP. 8-20mm NOM. TYP. FASTENER (RIVET OR COUNTERSUNK SCREW) INTERNAL AIR BARRIER SEALED TO ALL JUNCTIONS CEMINTEL EXPRESS WALL TOP HAT SCALE SECTION DETAIL : CEMINTEL BARESTONE (TYPICAL)- 1:2 EXPRESSED JOINT HORIZONTAL A NB 17.03.22 INITIAL ISSUE PROJECT DRAWING DRAWING No. REV CLIENT CONTRACTOR SHOULD VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK. IF A DISCREPANCY IS FOUND BETWEEN FIGURED DIMENSIONS AND SCALED DIMENSIONS, IT SHALL BE CHECKED WITH THE PRINCIPAL CONSULTANT. BY DATE AMENDMENT REV THIS DOCUMENT IS NOT TO BE USED FOR CONSTRUCTION UNLESS SIGNED AND ISSUED FOR CONSTRUCTION COPYRIGHT FORM4 ARCHITECTS.COPYING, REPRODUCTION OR USE OF THIS DESIGN OR DRAWING IN WHOLE OR PART IS PROHIBITED WITHOUT THE WRITTEN CONSENT OF FORM4 ARCHITECTS. CHECKED SCALE DRAWN APPROVED PRINCIPAL CONSULTANTS DETAILS KFC EASTERN CREEK ROOTY HILL ROAD SOUTH EASTERN CREEK, NSW 2766, AUSTRALIA LAMSTAN GROUP PTY LTD Form 4 Architects Unit Trust T/A Form 4 Architects ABN: 37 992 244 025 Conrad Ramakers(AIA) Nominated Architect for Registrations: N6237 V18294 Q4751 W2660 T892 S3452 CONSTRUCTION ISSUE CEMINTEL BARESTONE CLADDING DETAILS NB 1:2@A1;1:4@A3 GM CR 20-103-A407 B C.01 ALL EXTERNAL WALL CLADDING SHALL BE INSTALLED STRICTLY IN ACCORDANCE WITH THE MATERIAL MANUFACTURES WRITTEN SPECIFICATIONS AND INSTRUCTIONS TO ENSURE: - A WEATHER & VERMIN/ INSECT PROOF LINING IS ACHIEVED. - FULL WARRANTY COVERAGE FOR THE LINING SYSTEM IS OBTAINED. NOTE : CONSTRUCTION B NB 18.05.22 SECTION DETAIL REVISED KFC Eastern Creek

FASTENER

5-10mm

CEMINTEL

BARESTONE

DOOR

STAINLESS STEEL PANELLING TO CARRY DOWN BEHIND COVE.

FREEZER WALL PANELLING

PAINTED WALL

BLACK SILICON SEAL

CERAMIC WALL TILE OR STAINLESS STEEL WALL LINING ON 9mm VILLABOARD. (RETURN FOLD STAINLESS STEEL SHEET AT ALL ENDS)

NOTE: STAINLESS STEEL CORNER PROTECTORS TO START AT TOP OF RADIUS COVE TILE

1.6mm FOLDED STAINLESS STEEL TILE RETENTION MOULDING AS DETAILED

50mm RADIUS ANODISED ALUMINIUM COVE

SEAL TILES TO WALLS WITH SILICON SEALANT FLOOR TILES ON MORTAR BED

NOTE PACK BEHIND ALUMINIUM COVES WITH MOULD RESISTANT SILICON. SEAL ENDS WITH MOULD RESISTANT WHITE SILICON.

SKIRTING COVE TILE TO MATCH FLOOR TILES

SILICON EXPANSION JOINT

BLACK SILICON SEALANT

SKIRTING COVE TILE TO MATCH FLOOR TILES

SILICON EXPANSION JOINT

8 Sriniklesh Balachandran - Portfilio

SCALE BOH - COOLROOM / FREEZER 01 - 1:2.5

FREEZER WALL PANELLING. 20

COOLROOM

CONTINUOUS 1.6mm BMT FOLDED STAINLESS STEEL TILT RETENTION MOULD POP RIVETED TO PANELLING AT 300mm CENTERS MAXIMUM SILICON EXPANSION

JOINT

STAINLESS STEEL PANELLING TO CARRY DOWN BEHIND RETENTION MOULD WHERE APPLICABLE. ALTERNATIVELY THE RETENTION MOULD CAN BE FOLDED INTO THE BOTTOM OF THE S/S PANEL. SKIRTING COVE TILE TO MATCH FLOOR TILES FLOOR TILES ON MORTAR BED CONTINUOUS

2 10 4 17 15 17

MIN. 25mm RADIUS ASCALE BOH - INSIDE COOLROOM FREEZER 02 - 1:2.5 SCALE BOH - PAINTED WALLS 03 - 1:2.5 SCALE BOH AT W1 FINISH OR S/S LINED WALLS 04 - 1:2.5 ALTERNATIVE FOR W1 SCALE DETAIL A - 1:2.5 RETENTION MOULD NOTE: STAINLESS STEEL CORNER PROTECTORS TO START AT TOP OF RADIUS COVE TILE SILICON EXPANSION JOINT SKIRTING COVE TILE TO MATCH FLOOR TILES BLACK SILICON SEALANT CERAMIC WALL TILE OR STAINLESS STEEL WALL LINING ON 9mm WATER PROOF SUBSTRATE. MIN. 25mm RADIUS W1 REFUSE AREA 9mm CFC WALL LINING WITH PAINTED WALL FINISH 50mm RADIUS ANODISED ALUMINIUM COVE CONCRETE SLAB SET TO FALLS SCALE BOH AT REFUSE AREA BOH 05 - 1:2.5 BOH FFL SSL FFL SSL FFL SSL FFL SSL FFL SSL FFL 125 CONFIRM WITH TILE SUPPLIER A NB 10.03.22 INITIAL ISSUE PROJECT DRAWING DRAWING No. REV CLIENT CONTRACTOR SHOULD VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK. IF A DISCREPANCY IS FOUND BETWEEN FIGURED DIMENSIONS AND SCALED DIMENSIONS, IT SHALL BE CHECKED WITH THE PRINCIPAL CONSULTANT. BY DATE AMENDMENT REV THIS DOCUMENT IS NOT TO BE USED FOR CONSTRUCTION UNLESS SIGNED AND ISSUED FOR CONSTRUCTION COPYRIGHT FORM4 ARCHITECTS.COPYING, REPRODUCTION OR USE OF THIS DESIGN OR DRAWING IN WHOLE OR PART IS PROHIBITED WITHOUT THE WRITTEN CONSENT OF FORM4 ARCHITECTS. CHECKED SCALE DRAWN APPROVED PRINCIPAL CONSULTANTS DETAILS KFC EASTERN CREEK ROOTY HILL ROAD SOUTH EASTERN CREEK, NSW 2766, AUSTRALIA LAMSTAN GROUP PTY LTD Form 4 Architects Unit Trust T/A Form 4 Architects ABN: 37 992 244 025 Conrad Ramakers(AIA) Nominated Architect for Registrations: N6237 V18294 Q4751 W2660 T892 S3452 CONSTRUCTION ISSUE BOH SKIRTING DETAILS NB 1:2.5@A1;1:5@A3 GM CR 20-103-A409 A KFC Eastern Creek

NOTE

KFC HAVE A BULK PROCUREMENT ARRANGEMENT FOR THE PURCHASE OF STAINLESS STEEL ITEMS. REFER TO THE SPECIFICATION 'NOMINATED SUPPLIERS' FOR CONTACT DETAILS.

9 Sriniklesh Balachandran - Portfilio 200x200mm FIXING PLATE WITH SERVICE HOLE BOTH ENDS COVER PLATE ON COUNTER SIDE OF BAR. PITCH TO TOP OF POWER SUPPLY BAR AS DETAILED MOUNT SINGLE PHASE AND 3 PHASE POWER OUTLETS PLUS DATA POINTS ON REAR OF BAR. CUT SERVICE HOLES AS REQUIRED. REFER TO REFLECTED CEILING PLAN FOR LENGTH. SCALE ISOMETRIC VIEW 03 - 1:20 U/S 2000 min. 2150 100 100 100 STAINLESS STEEL FABRICATED SERVICES BAR COVER PLATE 200x200 x 6mm FIXING PLATE WELDED TO BAR. FIX TO CEILING OVER WITH 4 x 10mm COUNTER SUNK STAINLESS STEEL BOLTS PER PLATE. PROVIDE 80mm Ø SERVICE HOLE THRU PLATE AND STRUCTURE OVER. PITCH TO TOP OF POWER SUPPLY BAR AS DETAILED SCALE ELEVATION 02 - 1:20 SCALE PLAN 01 - 1:20 04CH LINE OF WALL 100 50 100 430 PITCH TOP OF DUCT TO MEET FOOD CODE REQUIREMENTS 100x100mm STAINLESS STEEL POST BEYOND 200x200 x 6mm FIXING PLATE WELDED TO BAR. FIX TO CEILING OVER WITH 4 x 10mm COUNTER SUNK STAINLESS STEEL BOLTS PER PLATE. PROVIDE 80mm Ø SERVICE HOLE THRU PLATE AND STRUCTURE OVER FOR SERVICES. 45° 1.6mm BMT FOLDED STAINLESS STEEL SERVICES DUCT. 1.6mm BMT FLAT STAINLESS STEEL COVER PLATE SCREW FIXED TO DUCT AT 300mm CENTERS WITH STAINLESS STEEL SCREWS. SINGLE PHASE/3 PHASE DATA OUTLETS ON COOKLINE SIDE OF BAR 13mm PLASTERBOARD CEILING 24mm WATERPROOF PLYWOOD FIXING PLATE PLUS SUPPORT STRUCTURE OVER FIXED TO TRUSSES WITH 80mm HOLE FOR SERVICES SCALE SECTION 04 - 1:5 CHIP DUMP FRY HOOD OVER STAINLESS STEEL WALL LINING OVER 9mm VILLABOARD RAW DUMP FRYER FRYER SCALE PLAN 01 - 1:20 0203FRYER CNF WHB1/HTD/SD STAINLESS STEEL LINING ON 9mm VILLABOARD 1.6mm FOLDED STAINLESS STEEL PANEL INSERT WITH EDGE RETURN TO ALL SIDES OVER 9mm VILLABOARD REFER TO INTERIOR DESIGN DOCUMENTATION FOR WALL FINISHES METAL STUD FRAME WALL 9mm VILLABOARD WALL LINING ON STUD FRAMING SCALE SECTION DETAIL 05 - 1:1 SCALE ELEVATION FROM BOH 02 - 1:20 SCALE SECTION 03 - 1:20 610 185 2500 4 x DGPO'S TO ELECTRICAL ENGINEERS DETAILS 4 x DGPO'S TO ELECTRICAL ENGINEERS DETAILS 425 1890 1750 EXHAUST HOOD ALIGN HOOD WITH SIDE OF WALL FRYER RAW DUMP FRYER FRYER EXHAUST HOOD INFILL PANEL 2885 S/S LINING TO WALL & RECESS BELOW CHIP HOOD FFL 0.00 3000 U/S CEILING FOH 2500 U/S CEILING BOH 0306 - FRYEREXHAUSTHOOD RECESS FRYER 04FRY HOOD STAINLESS STEEL INFILL PANEL FRY HOOD W2a W2a S1 PREP AREA SERVERY 2150 U/S BULKHEAD REFER TO INTERIOR DESIGN DOCUMENTATION FOR FINISHES STAINLESS STEEL INFILL PANEL OVER HOOD TO MECHANICAL ENGINEER 'S DETAIL REFER TO INTERIOR DESIGN DOCUMENTATION FOR JOINERY IN THIS AREA SCALE SECTION DETAIL 04 - 1:5 4 x GPO'S TO ELECTRICAL ENGINEERS DETAILS 1.6mm FOLDED STAINLESS STEEL PANEL INSERT WITH EDGE RETURN TO ALL SIDES OVER 9mm VILLABOARD 1.2mm FOLDED STAINLESS STEEL PANEL WITH EDGE RETURN TO ALL SIDES ON 9mm VILLABOARD METAL STUD FRAME WALL 425 SKIRTING TILES 9mm FC SHEETING 45° 05REFER TO INTERIOR DESIGN DOCUMENTATION FOR FINISHES SSL -0.60 S1 C.01 STAINLESS STEEL TO BE 304 GRADE SMOOTH FINISH. C.02 REFER TO THE REFLECTED CEILING PLAN FOR THE INSTALLATION LOCATION OF THE SERVICES DUCT. NOTE : CONSTRUCTION

SCALE FRY DUCT DETAILSA NB 14.03.22 INITIAL ISSUE SS ITEMS - FRY DUCT AND BURGER LINE SERVICES DUCT NB SCALE AS SHOWN GM20-103-A701 B PROJECT DRAWING DRAWING No. REV CLIENT CONTRACTOR SHOULD VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK. IF A DISCREPANCY IS FOUND BETWEEN FIGURED DIMENSIONS AND SCALED DIMENSIONS, IT SHALL BE CHECKED WITH THE PRINCIPAL CONSULTANT. BY DATE AMENDMENT REV THIS DOCUMENT IS NOT TO BE USED FOR CONSTRUCTION UNLESS SIGNED AND ISSUED FOR CONSTRUCTION COPYRIGHT FORM4 ARCHITECTS.COPYING, REPRODUCTION OR USE OF THIS DESIGN OR DRAWING IN WHOLE OR PART IS PROHIBITED WITHOUT THE WRITTEN CONSENT OF FORM4 ARCHITECTS. CHECKED SCALE DRAWN APPROVED PRINCIPAL CONSULTANTS DETAILS KFC EASTERN CREEK ROOTY HILL ROAD SOUTH EASTERN CREEK, NSW 2766, AUSTRALIA LAMSTAN GROUP PTY LTD Form 4 Architects Unit Trust T/A Form 4 Architects ABN: 37 992 244 025 Conrad Ramakers(AIA) Nominated Architect for Registrations: N6237 V18294 Q4751 W2660 T892 S3452 CONSTRUCTION ISSUE B SP 16.05.22 WHB1/HTD/SD ADDED KFC Eastern Creek

NOTE : BACK OF HOUSE FLOOR TILES

1.0 TILES TO BE LAID WITH IN-LINE JOINTS (NOT STRETCHER BOND PATTERN)

2.0 TILE JOINTS TO BE 6mm TO 8mm WIDE

3.0 TILE JOINTS TO BE FLUSH WITH TOP OF TILES.

4.0 TILE GROUT TO BE BLACK.

NOTE

- THE REMOVABLE STAINLESS STEEL DUCT MAY BE DELETED

FLAT. ALTERNATE SERRATED AND FLAT 288 SCALE DROP IN FLOOR GRATE - SECTION B - 1:5

SCALE TILE / EPOXY BORDER PLAN 02 - 1:5

A -

SCALE FLOOR SUMP - PLAN 01 - 1:5

DROP IN FLOOR GRATE C -

BOH FLOOR TILES

NOTE : CONSTRUCTION

C.02 GRATE TO HAVE 2mm CLEARANCE TO SUMP ALL AROUND FOR EASY REMOVAL.

C.03 ENSURE ALL PLASTIC PROTECTION COATING IS REMOVED FROM S/S SUMP PRIOR TO INSTALLATION OF EPOXY SURROUND.

C.04 ENSURE MESH BASKET SITS FLAT ON HOUSING AND GRATE SITS FLAT ON GRATE. BOILING WATER UNIT:

S.S. SUMP BODY DROP IN FLOOR GRATE CONSTRUCTED OF 20 x 5mm S.S. FLATS @ 12 EQUAL SPACES. REFER DETAIL BELOW FOR NON SLIP FINISH.

REMOVABLE PERFORATED PLATE GRATE OVER DRAIN (AS NOTED BELOW) TO SIT FLAT OVER HOUSING.

DROP IN S/S MESH BASKET WITH 40 x 4mm S.S. PLATE FLANGE AROUND TOP EDGE.

8mmØ S.S. LIFTING BAR WELDED TO UNDERSIDE OF S.S. 40 x 4mm PLATE. WITHIN MESH BASKET.

SUMP FIXED WITH 1 No. 10g S.S. SCREW AND LOXIN PER CORNER.

1.6mm THICK S.S. SUMP BODY.

FLAT S.S. REMOVABLE PLATE GRATING SCREWED BOLTED TO SUMP BODY. 6mmØ PERFORATIONS OVER 100mmØ OUTLET.

Ø S.S. SPIGOT.

DRAINAGE CONNECTION TO 'P' TRAP.

SCALE FLOOR SUMP - SECTION A - 1:5

285 205 4 40

285 205 8mmØ S.S. LIFTING BAR WELDED TO UNDERSIDE OF S.S. 40 x 4mm PLATE. WITHIN MESH BASKET.

C.05 TERMINATE DUCT TO ALLOW PREP. TABLE TO SIT AGAINST WALL. IF DUCT SITS AGAINST REFRIGERATION PANELING, RUN CONDENSATE LINE AS A 12mm CHROMED COPPER PIPE SET 25mm OFF WALLS DISCHARGE OVER TUNDISH. (DO NOT EXTEND DUCT TO FLOOR)

C.06 IF A LOWER LEVEL TUNDISH IS INSTALLED, A SECOND UPPER LEVEL TUNDISH MUST BE INSTALLED TO STOP STEAM COLLECTING IN THE ZIP UNIT. FAILURE TO INSTALL CORRECTLY MAY RESULT IN CORROSION WITHIN THE ZIP UNIT & VOID WARRANTIES.

DROP IN S/S MESH BASKET WITH 40 x 4mm S.S. PLATE FLANGE AROUND TOP EDGE.

NTS

FLEXIBLE SILICON SEAL AROUND FLOOR WASTE TO MATCH THAT USED ON THE FLOOR TILE EXPANSION FULL DEPTH WELD REQUIRED TO BOTH SIDES OF EACH DIVISION

NOTE

KFC HAVE A BULK PROCUREMENT ARRANGEMENT FOR THE PURCHASE OF STAINLESS STEEL ITEMS. REFER TO THE SPECIFICATION : 'NOMINATED SUPPLIERS' FOR CONTACT DETAILS.

WHERE ALL SERVICES ARE HOUSED WITHIN THE WALL (IE STUD FRAMED WALLS. - ALL SERVICE CONNECTION POINTS ARE TO BE LOCATED BEHIND THE ZIP UNIT HOUSING. DO NOT EXPOSE ELECTRICAL, WATER OR OVERFLOW CONNECTIONS BELOW THE UNIT UNLESS INDICATED ON THE DRAWINGS. ZIP REMOTE NOZZLE PART NUMBERS ITEM PART No DESCRIPTION 1 90268 CAP 2 99033 REMOTE TAP KIT SS ITEMS - BOILING WATER UNIT AND FLOOR SUM DETAILS NB SCALE AS SHOWN GM20-103-A703 A PROJECT DRAWING DRAWING No. REV CLIENT CONTRACTOR SHOULD VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK. IF A DISCREPANCY IS FOUND BETWEEN FIGURED DIMENSIONS AND SCALED DIMENSIONS, IT SHALL BE CHECKED WITH THE PRINCIPAL CONSULTANT. BY DATE AMENDMENT REV THIS DOCUMENT IS NOT TO BE USED FOR CONSTRUCTION UNLESS SIGNED AND ISSUED FOR CONSTRUCTION COPYRIGHT FORM4 ARCHITECTS.COPYING, REPRODUCTION OR USE OF THIS DESIGN OR DRAWING IN WHOLE OR PART IS PROHIBITED WITHOUT THE WRITTEN CONSENT OF FORM4 ARCHITECTS. CHECKED SCALE DRAWN APPROVED PRINCIPAL CONSULTANTS DETAILS KFC EASTERN CREEK ROOTY HILL ROAD SOUTH EASTERN CREEK, NSW 2766, AUSTRALIA LAMSTAN GROUP PTY LTD Form 4 Architects Unit Trust T/A Form 4 Architects ABN: 37 992 244 025 Conrad Ramakers(AIA) Nominated Architect for Registrations: N6237 V18294 Q4751 W2660 T892 S3452 CONSTRUCTION ISSUE A NB 10.03.22 INITIAL ISSUE KFC Eastern Creek

10 Sriniklesh Balachandran - Portfilio 200 1200 TO NOZZLE 150 REMOVABLE STAINLESS STEEL DUCT FABRICATED FROM 1.2mm THICK STAINLESS STEEL ELECTRICAL CABLES WALL BEHIND BLACK SILICON SEALANT TO ALL EDGES LINE OF BOILING WATER UNIT OVER 40 OPTIONAL REMOVABLE S/S DUCT (REFER NOTE BELOW) 40 LITRE ZIP BOILING WATER UNIT WITH REMOTE TAP & FRONT OUTLET CAPPED TUNDISH PLUMBER TO PROVIDE CONNECTION FROM HOT OUTLET TO REMOTE TAP CONCEAL WITHIN DUCT / WALL CONCEAL DRAIN LINE WITHIN WALL JUG NOZZLE PREP BENCH JUG ENSURE MINIMUM MAINTENANCE CLEARANCE 350 OPTIONAL LOWER LEVEL TUNDISH OPTIONAL REMOVABLE S/S DUCT (REFER NOTE BELOW) OPTIONAL LOWER LEVEL TUNDISH ZIP UNIT OVERFLOW ZIP UNIT OVERFLOW 1250 TO U/S DUCT SCALE BOILING WATER UNIT - PLAN (HYD) A - 1:10 BTAP C515 WIDTH TO SUIT BOILING WATER UNIT SCALE FRONT ELEVATION B - 1:10 SCALE SIDE ELEVATION C - 1:10 ITEM 2 ITEM 1 TOP OF BENCH FFL CEILING 300 O/A HOUSING 100

300 12 EQUAL SPACES

100mm

JOINTS FALL FALL FALL FALL S/S FLOOR SUMP HOUSING S/S MESH BASKET BOH FLOOR TILE ON CEMENT BED FLOOR SUMP HOUSING RECESS IN SLAB 4 20 25 55 252 SCALE FLOOR SUMP - DETAIL C - 1:2 SILICON SEAL DROP IN FLOOR GRATE 50 50 EQ. 20 50 50 50 EQ. 4 45° SERRATIONS AS SHOWN TO EACH S.S.

ASECTIONS BETWEEN EACH S.S. RAIL (FRAME MEMBERS TO BE FLAT) TOP OF SERRATIONS TO BE BUFFED TO REMOVE SHARP EDGES

SCALE MESH BASKET - AXONOMETRIC

FLOOR SUMP C.01 ALL SHEET METAL WORK TO BE 1.6mm THICK STAINLESS STEEL & 304 GRADE UNO.

KFC MAITLAND

The concept involved integrating a KFC establishment into the current structure on the premises. This project held notable intrigue due to the fact that the nearby structures on the site were designated as heritage-listed. Consequently, our approach encompassed meticulous measurement, documentation, and modeling of the pre-existing building and site. The proposal’s accomplishment relied on a seamless assimilation with the existing structure, while also ensuring full adherence to industry standards and building codes applicable to a Quick Service Restaurant (QSR). While the outer framework of the structure remained unchanged to preserve the integrity of the surroundings, the interior underwent substantial renovation efforts.

LOCATION:

2 ST Andrews St Maitland NSW 2320

DEVELOPED FOR:

Lincron PTY LTD

SKILLS APPLIED:

Revit Model Management, Site Documentation and Measurements, Planning and Concept Design.

KEY ITEMS HANDLED:

Revit model developed based on site measurement, Preliminary design drawings developed, Floor layout options developed and Rendering

11 Sriniklesh Balachandran - Portfilio

DRAWN COPYRIGHT KFC PTY LTD. COPYING, THIS DESIGN OR DRAWING WITHOUT THE WRITTEN CONTRACTOR SHOULD VERIFY COMMENCING WORK. IF A DISCREPANCY FIGURED DIMENSIONS AND CHECKED WITH THE THIS DOCUMENT IS NOT TO BE SIGNED AND ISSUED PRINCIPAL CONSULTANTS Form 4 Architects Unit Trust ABN: 37 992 244 025 Conrad Ramakers(AIA) Nominated N6237 V18294 Q4751 W2660 CLIENT PROJECT DRAWING CHECKED DRAWING NO. KFC MAITLAND A900 2 ST ANDREWS ST MAITLAND NSW 2320 3D PERSPECTIVE KS21-181/ DA / FAF1 LINCRON PTY

02 -

02EXISTING PERSPECTIVE SCALE -N.T.S@A1

01EXISTING PERSPECTIVE SCALE -N.T.S@A1

PROPOSED PERSPECTIVE SCALE -N.T.S@A1

01PROPOSED PERSPECTIVE SCALE -N.T.S@A1 KFC Maitland

BYDATEAMENDMENT KS18.07.22INITIAL KS21.07.22REMOVED

RENDERED BUILDING "THE

12 Sriniklesh Balachandran - Portfilio 'KFC' RESTAURANT NEW LANDSCAPING B O U N D A R Y -30.83m B O U N D A R Y -23.71m

17.70m B O U N D AR Y - 9 145m B O U N D A R Y2 5 3 2 5 m B O U N D A R Y -24.415m B O U N D A R Y -15.46m NEW LANDSCAPING PORDER OINT REFER TO 21-181 -A102 FOR PROPOSED FLOOR PLAN NEW LANDSCAPING DT-PICKUP POINT DT-PAY POINT LOADING ZONE NEW LANDSCAPING 2 STOREY BRICK BUILDING "LIBRARY"

BOUNDARY-

BELMORE HOTEL" ST ANDREWS STREET THE RIVERSIDE WALK T H E R I V E R S I D E W A L K ABANDONSEWERMAIN 2 STOREY BRICK BUILDING NEW LANDSCAPING 1 9 10 13 EXISTING AWN NG STAFF PARKING STAFF PARKING STAFF PARKING 7005 5400 5900 5900 6200 UP 2100 7440 5500 150 ENTRY 14 16 B O U N D A R Y - 39 15m PUBLIC PARKING EX. LANDSCAPING NEW LANDSCAPING S.07 A013 S.09 A013 S.02 A013 S.03 A013 S.05 A013 S.04 A013 S.01 A013 B O U N D A R Y - 21 01m S.06 A013 S.08 A013 S.21 A013 S.22 A013 BOL S.21 A013 S.20 A013 S.20 A013 ASPHALT OR BLACK CONCRETE BLACK CONCRETE 2 3 4 5 6 7 8 11 12 15 BOL BOL LP LP LP LP LP LP LP LP LP WAITING BAY 100mm WIDE WHITE LINE AND ROADWAY EXISTING LANDSCAPED EXISTING BLACK CONCRETE PAVING/ RAMPS/ KERB EXISTING WHITE 'SYMBOL 900 HIGH ON BLUE TO COMPLY WITH AS1428.1 DENOTES SIGN TYPE DRAWING A013 FOR GENERAL KEY: PROPOSED LANDSCAPED WHITE PAINTED DIRECTIONAL SCOPE OF WORK NOTES TO DRAWING A002. 0.00 300 2000 1000 1000 EXISTING KFC BUILDING S.01 A000 NEW SINGLE FLOOD WITH FOOTING & CONNECTION EXTERNAL LIGHTING LP1 SCALE DRAWN COPYRIGHT KFC PTY LTD. COPYING, REPRODUCTION THIS DESIGN OR DRAWING IN WHOLE OR WITHOUT THE WRITTEN CONSENT CONTRACTOR SHOULD VERIFY ALL DIMENSIONS COMMENCING WORK. IF A DISCREPANCY FIGURED DIMENSIONS AND SCALED DIMENSIONS, CHECKED WITH THE PRINCIPAL THIS DOCUMENT IS NOT TO BE USED FOR SIGNED AND ISSUED FOR CONSTRUCTION PRINCIPAL CONSULTANTS DETAILS Form 4 Architects Unit Trust T/A Form 4 ABN: 37 992 244 025 Conrad Ramakers(AIA) Nominated Architect N6237 V18294 Q4751 W2660 T892 S3452 CLIENT PROJECT DRAWING CHECKED APPROVED DRAWING NO. KFC MAITLAND A012 2 ST ANDREWS ST MAITLAND NSW 2320 SITE PLAN -PROPOSED NB21-181/ DA FAF1 ISSUE LINCRON PTY LTD KS21.07.22REMOVED SIGNAGEB

RESTAURANT NEW LANDSCAPING B O U N D A R Y -30.83m B O U N D A R Y -23.71m BOUNDARY17.70m B O U N D AR Y - 9.145m B O U N D A R Y2 5 3 2 5 m B O U N D A R Y -24.415m B O U N D A R Y -15.46m NEW LANDSCAPING PORDER OINT REFER TO 21-181 -A102 FOR PROPOSED FLOOR PLAN NEW LANDSCAPING DT-PICKUP POINT DT-PAY POINT LOADING ZONE NEW LANDSCAPING 2 STOREY BRICK BUILDING "LIBRARY"

'KFC'

BELMORE HOTEL" ST ANDREWS STREET THE RIVERSIDE WALK T H E R I V E R S I D E W A L K ABANDONSEWERMAIN 2 STOREY BRICK BUILDING NEW LANDSCAPING 1 9 10 13 EXISTING AWN NG STAFF PARK NG STAFF PARK NG STAFF PARKING 7005 5400 5900 5900 6200 UP 2100 7440 5500 150 ENTRY 14 16 B O U N D A R Y - 39 15m PUBLIC PARKING EX. LANDSCAPING NEW LANDSCAPING S.07 A013 S.09 A013 S.02 A013 S.03 A013 S.05 A013 S.04 A013 S.01 A013 B O U N D A R Y - 21 01m S.06 A013 S.08 A013 S.21 A013 S.22 A013 BOL S.21 A013 S.20 A013 S.20 A013 ASPHALT OR BLACK CONCRETE BLACK CONCRETE 2 3 4 5 6 7 8 11 12 15 BOL BOL LP LP LP LP LP LP LP LP LP WAITING BAY 100mm LINE EXISTING EXISTING PAVING/ EXISTING 900 TO COMPLY DENOTES DRAWING GENERAL KEY: PROPOSED WHITE SCOPE TO DRAWING 0.00 300 2000 1000 1000 EXISTING S.01 A000 NEW WITH EXTERNAL LP1 DRAWN COPYRIGHT KFC PTY THIS DESIGN OR DRAWING WITHOUT THE CONTRACTOR SHOULD COMMENCING WORK. FIGURED DIMENSIONS CHECKED WITH THIS DOCUMENT IS NOT SIGNED AND PRINCIPAL CONSULTANTS Form 4 Architects Unit ABN: 37 992 244 025 Conrad Ramakers(AIA) N6237 V18294 Q4751 CLIENT PROJECT DRAWING CHECKED DRAWING NO. KFC MAITLAND A012 2 ST ANDREWS ST MAITLAND NSW 2320 SITE PLAN NB21-181/ DA LINCRON PTY BYDATEAMENDMENT KS18.07.22INITIAL KS21.07.22REMOVED KFC Maitland

RENDERED BUILDING "THE

13 Sriniklesh Balachandran - Portfilio UP 1 CH 2181 TO U/S OF BEAM 2 3 4 5 6 7 8 9 A B C CH 2134 TO U/S OF BEAM CH 2284 CH 2233 CH 2486 CH 2082 CH 2180 TOP OF RISER 180mm CH 5245 GROUND TO ROOF BASE CH 2500 TO U/S OF BEAM X-A A200 X-D A201 X-B A200 ENTRY RECEPTION DESK SHELVING SHELVING SHELVING EXISTING COLUMN EXISTING COLUMN EXISTING VERICAL FINS OVER S I T E B O U COL COL COL COL COL COL COL COL COL LINING: EXISTING WALL/ DOOR/ WINDOW/ FURNITURE/ JOINERY/ FITTINGS/ EQUIPMENT TO BE REMOVED. TERMINATE/ MODIFY SERVICES AS NECESSARY. REPAIR FLOOR & CEILING FINISHES. EXISTING WALL TO REMAIN COL EXISTING STEEL COLUMN TO REMAIN EXISTING STORMWATER TO REMOVE COPYRIGHT KFC PTY LTD. COPYING, REPRODUCTION OR USE OF THIS DESIGN OR DRAWING IN WHOLE OR PART IS PROHIBITED WITHOUT THE WRITTEN CONSENT OF KFC PTY LTD. CONTRACTOR SHOULD VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK. IF A DISCREPANCY IS FOUND BETWEEN FIGURED DIMENSIONS AND SCALED DIMENSIONS, IT SHALL BE CHECKED WITH THE PRINCIPAL CONSULTANT. THIS DOCUMENT IS NOT TO BE USED FOR CONSTRUCTION UNLESS SIGNED AND ISSUED FOR CONSTRUCTION BYDATEAMENDMENT REV KS18.07.22INITIAL ISSUE A KFC Maitland UP 1 CH 2181 TO U/S OF BEAM 2 3 4 5 6 7 8 9 A B C E CH 2134 TO U/S OF BEAM CH 2284 CH 2251 CH 2252 CH 2233 CH 2075 CH 2095 CH 2486 CH 2082 CH 2180 TOP OF STAIRS 2520mm RISER 180mm CH 2448 TO U/S OF BEAM CH 5300 GROUND TO ROOF BASE CH 5245 GROUND TO ROOF BASE CH 2500 TO U/S OF BEAM X-A A200 X-D A201 X-C A201 X-B A200 MALE TOILET FEMALE TOILET TOILET ENTRY RECEPTION DESK SHELVING SHELVING SHELVING EXISTING COLUMN EXISTING COLUMN STAIRS STORMWATER PITS TO BE REMOVED EXISTING VERICAL FINS OVER EXISTING VERICAL FINS OVER S I T E B O U N D A R Y SITE BOUNDARY COL COL COL COL COL COL COL COL COL COL COL COL COL COL COL COL COL LINING: EXISTING WALL/ DOOR/ WINDOW/ FURNITURE/ JOINERY/ FITTINGS/ EQUIPMENT TO BE REMOVED. TERMINATE/ MODIFY SERVICES AS NECESSARY. REPAIR FLOOR & CEILING FINISHES. EXISTING WALL TO REMAIN COL EXISTING STEEL COLUMN TO REMAIN EXISTING STORMWATER TO REMOVE SCALE DRAWN COPYRIGHT KFC PTY LTD. COPYING, REPRODUCTION OR USE OF THIS DESIGN OR DRAWING IN WHOLE OR PART IS PROHIBITED WITHOUT THE WRITTEN CONSENT OF KFC PTY LTD. CONTRACTOR SHOULD VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK. IF A DISCREPANCY IS FOUND BETWEEN FIGURED DIMENSIONS AND SCALED DIMENSIONS, IT SHALL BE CHECKED WITH THE PRINCIPAL CONSULTANT. THIS DOCUMENT IS NOT TO BE USED FOR CONSTRUCTION UNLESS SIGNED AND ISSUED FOR CONSTRUCTION PRINCIPAL CONSULTANTS DETAILS Form 4 Architects Unit Trust T/A Form 4 Architects ABN: 37 992 244 025 Conrad Ramakers(AIA) Nominated Architect for Registrations: N6237 V18294 Q4751 W2660 T892 S3452 CLIENT PROJECT DRAWING CHECKED APPROVED DRAWING NO. REV. 1:50@A1 A KFC MAITLAND A100 2 ST ANDREWS ST MAITLAND NSW 2320 GROUND FLOOR PLANEXISTING & DEMOLITION NB -21-181/ DA / FAF1 ISSUE LINCRON PTY LTD BYDATEAMENDMENT REV KS18.07.22INITIAL ISSUE A

14 Sriniklesh

KFC Maitland

Balachandran - Portfilio

DULUX 'RED BOX' (RED)(A0639).

DULUX 'ALABASTER' (WHITE) KFC (A1016).

'BLACK CAVIAR (SN4 H9 -Sn4) RANGE:ALIWOOD CLIP-ON SUPPLIER:ALIWOOD

CLIP-ON

5050COS

SHEETING BEHIND TO BE PAINTED DULUX "BLACK SG6G9

305 METAL WALL SHEETING COLORBOND 'MONUMENT' (MID GREY)

POLISHED CEMENT FINISH

-TANAMI' FINISH EFFECT:VENETIAN

EXISTING EXPRESSED JOINTS TO BE PAINTED DULUX "BLACK" SG6G9

15 Sriniklesh Balachandran - Portfilio FFL 0 Level 1 2525 Level 3 5675 Level 4 8432 1 2 3 4 5 6 7 8 9 T1 M B-M M1 S.20 A013 CB CB CB M TH S.23 A013 B-M B-M B-M B-M S.21 A013 Level 2 5300 B R RED PAINT BEHIND MESH SCREEN

COLOR:SNOWGUM SIZE:50x50

CODE:

CFC

COLOUR KEY:

FLEXIBLE

PRODUCT:'UNITEX

COLOUR:CONCRETE

METAL

SUPPLIER:LOCKER

PATTERN:R03341 3.25mm DIA, HOLES 4.78mm CTRS, 41% OPEN AREA MATERIAL:MILD STEEL FINISH: POWDERCOAT COLOUR:KFC RED LED STRIP PRODUCT:TOP BEND HELIFLEX NEON FLEX PROFILE HF1616TB SUPPLIER:LIGHTSEARCH REFER TO ELECTRICAL ENGINEER'S DOCUMENTATION FOR DETAILS. DULUX POWDERCOAT 'ELECTRO BLACK ACE' 9069116F R W B TB B-M T1 M CB M1 JAMES HARDIE 'SKYON AXON' VERTICALLY GROOVED PRE-PRIMED PANELS, GROOVE SPACING 133mm, PAINTED BLACK FINISH TH FC WALL SHEETING: DULUX 'TEA HOUSE' (SN4G6) FFL 0 Level 1 2525 Level 3 5675 Level 4 8432 A B C D E M1 T1 R B-M M1 M1 S.20 A013 Level 2 5300 S.21 A013 R RED PAINT BEHIND MESH SCREEN SCALE DRAWN COPYRIGHT KFC PTY LTD. COPYING, REPRODUCTION THIS DESIGN OR DRAWING IN WHOLE OR PART IS WITHOUT THE WRITTEN CONSENT OF KFC PTY CONTRACTOR SHOULD VERIFY ALL DIMENSIONS ON SITE COMMENCING WORK. IF A DISCREPANCY IS FOUND FIGURED DIMENSIONS AND SCALED DIMENSIONS, IT CHECKED WITH THE PRINCIPAL CONSULTANT. THIS DOCUMENT IS NOT TO BE USED FOR CONSTRUCTION SIGNED AND ISSUED FOR CONSTRUCTION PRINCIPAL CONSULTANTS DETAILS Form 4 Architects Unit Trust T/A Form 4 Architects ABN: 37 992 244 025 Conrad Ramakers(AIA) Nominated Architect for N6237 V18294 Q4751 W2660 T892 S3452 CLIENT PROJECT DRAWING CHECKED APPROVED DRAWING NO. AS SHOWN KFC MAITLAND A200 2 ST ANDREWS ST MAITLAND NSW 2320 EXTERNAL ELEVATIONS SHEET 01 NB -21-181/ DA / FAF1 ISSUE LINCRON PTY LTD SCALE - 1 100@A1 A100 EXISTING FRONT ELEVATION WEST X-A SCALE - 1 50@A1 A102 PROPOSED FRONT ELEVATION WEST A SCALE - 1 50@A1 A102 PROPOSED FRONT ELEVATION SOUTH B SCALE - 1 : 100@A1 A100 EXISTING FRONT ELEVATION SOUTH X-B BYDATEAMENDMENT KS18.07.22INITIAL ISSUE KFC Maitland

DULUX

LONGLINE

SCREEN

GROUP

COLOUR KEY:

DULUX 'RED BOX' (RED)(A0639).

DULUX 'ALABASTER' (WHITE) KFC (A1016).

DULUX 'BLACK CAVIAR (SN4 H9 -Sn4)

RANGE:ALIWOOD CLIP-ON SUPPLIER:ALIWOOD COLOR:SNOWGUM

SIZE:50x50 CLIP-ON

CODE: 5050COS

CFC SHEETING BEHIND TO BE PAINTED DULUX "BLACK SG6G9

LONGLINE 305 METAL WALL SHEETING COLORBOND 'MONUMENT' (MID GREY)

FLEXIBLE POLISHED CEMENT FINISH

PRODUCT:'UNITEX -TANAMI' FINISH EFFECT:VENETIAN COLOUR:CONCRETE EXISTING EXPRESSED JOINTS TO BE PAINTED DULUX "BLACK" SG6G9

METAL SCREEN

SUPPLIER:LOCKER GROUP

PATTERN:R03341 3.25mm DIA, HOLES 4.78mm

16 Sriniklesh Balachandran - Portfilio FFL 0 Level 1 2525 Level 3 5675 Level 4 8432 1 2 3 4 5 6 7 8 9 M1 TB B-M

B S.22 A013 S.21 A013 Level 2 5300

R RED PAINT BEHIND MESH SCREEN

B-M R B-M

R B-M

CTRS, 41% OPEN AREA MATERIAL:MILD STEEL FINISH: POWDERCOAT COLOUR:KFC RED LED STRIP PRODUCT:TOP BEND HELIFLEX NEON FLEX PROFILE HF1616TB SUPPLIER:LIGHTSEARCH REFER TO ELECTRICAL ENGINEER'S DOCUMENTATION FOR DETAILS. DULUX POWDERCOAT 'ELECTRO BLACK ACE' 9069116F R W B TB B-M T1 M CB M1 JAMES HARDIE 'SKYON AXON' VERTICALLY GROOVED PRE-PRIMED PANELS, GROOVE SPACING 133mm, PAINTED BLACK FINISH TH FC WALL SHEETING: DULUX 'TEA HOUSE' (SN4G6) FFL 0 Level 1 2525 Level 3 5675 Level 4 8432 A B C D E TB B-M TH R S.21 A013 Level 2 5300 PAINT TH ON EXISTING BRICK TH TB B-M SCALE DRAWN COPYRIGHT KFC PTY LTD. COPYING, REPRODUCTION OR USE THIS DESIGN OR DRAWING IN WHOLE OR PART IS PROHIBITED WITHOUT THE WRITTEN CONSENT OF KFC PTY LTD. CONTRACTOR SHOULD VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK. IF A DISCREPANCY IS FOUND BETWEEN FIGURED DIMENSIONS AND SCALED DIMENSIONS, IT SHALL CHECKED WITH THE PRINCIPAL CONSULTANT. THIS DOCUMENT IS NOT TO BE USED FOR CONSTRUCTION UNLESS SIGNED AND ISSUED FOR CONSTRUCTION PRINCIPAL CONSULTANTS DETAILS Form 4 Architects Unit Trust T/A Form 4 Architects ABN: 37 992 244 025 Conrad Ramakers(AIA) Nominated Architect for Registrations: N6237 V18294 Q4751 W2660 T892 S3452 CLIENT PROJECT DRAWING CHECKED APPROVED DRAWING NO. REV. AS SHOWN B KFC MAITLAND A201 2 ST ANDREWS ST MAITLAND NSW 2320 EXTERNAL ELEVATIONSSHEET 02 NB -21-181/ DA FAF1 ISSUE LINCRON PTY LTD SCALE - 1 : 100@A1 A100 EXISTING DRIVE-THRU ELEVATION EAST X-C SCALE 1 50@A1 A102 PROPOSED DRIVE-THRU ELEVATION EAST C SCALE - 1 : 50@A1 A102 PROPOSED SIDE ELEVATION D SCALE - 1 100@A1 A100 EXISTING SIDE ELEVATION X-D BYDATEAMENDMENT KS18.07.22INITIAL ISSUE KS21.07.22REMOVED SIGNAGEB

ANACONDA & HARRIS SCARFE| KELSO

The building is planned to accommodate both Anaconda and Harris Scarfe within a unified framework. To enhance construction efficiency and ensure the structure’s durability, precast concrete wall panels were employed. I was tasked with creating comprehensive and detailed construction drawings for the wall sections. In a subsequent phase, my responsibilities extended to obtaining construction certificates from the local council and modifying all construction drawings to align with the regulations outlined in the Building Code of Australia, as well as meeting the specific demands set forth by the council.

FIXED TO PC PANEL, COLOUR TO MATCH ROOFING

300mm WIDE FOLDED 1.0mm BMT METAL BOX GUTTER

LOCATION:

Ingersole Drive Kelso NSW 2795

DEVELOPED FOR: Living Design Projects

SKILLS APPLIED: Construction Documentation, Detail Design, CC Approve and Certification.

KEY ITEMS HANDLED: Detail drawings, Construction drawings detailed, Wall section details, Approve and Certification from authorities.

STEELWORK TO STRUCTURAL ENGINEER'S DETAILS

MONDOCLAD ON TOPHATS FIXED TO FASCIA TRUSS

13mm SET PLASTERBOARD CEILING ON RONDO SUSPENSION SYSTEM

ANACONDA OFFICE RC CONCRETE SLAB AND FOOTING TO STRUCT. ENG. DETAILS

WATERPROOF MEMBRANE TYPICAL

17 Sriniklesh Balachandran - Portfilio

Anaconda & Harris scarfe| Kelso FFL 0 PARAPET 1 6900 U/S CEILING 3000 A U/S OF CEILING 2 2700 600 LONG RUN METAL DECK ROOF SHEETING ON PURLINS TYP. TO STRUCTURAL ENGINEER'S DETAILS EXTERNAL SOFFIT -6mm HARDIEFLEX SHEET WITH 10mm EXPRESSED JOINTS. PAINT FINISH. RAINWATER HEAD, DOWNPIPE AND BOX GUTTER AS PER ENG.'S DETAILS GRADED TIMBER PACKER, SCREW FIXED TO PRE-CAST CONCRETE PANEL TYPICAL METAL CAPPING FLASHING. COLORBOND FINISH TO MATCH ROOFING REVERSE FALL TO ROOF. EXTERNAL TEMPORARY PROMOTIONAL IMAGE FRAME PLASTERBOARD WALL LINING ON 76mm METAL STUD FRAMING WITH 50mm R1.4 BATT INSULATION TO MEET SECTION J REQUIREMENTS LYSAGHTS MINI ORB ON TOP HAT SECTIONS

(COLORBOND FINISH) ON LYSAGHT SPANDEK GUTTERBOARD ON 40 x 40 GALVANISED MILD STEEL ANGLE SUPPORT RAIL AT 1200 CENTERS FIXED TO GUTTER PURLIN AND PFC. PACK GUTTERBOARD OFF ANGLE PFC TO CREATE FALL. REFER TO ENGINEER'S DRAWINGS FOR DETAILS. SLOT THROUGH PANEL AT LOW POINT OF GUTTER RAINWATER HEAD -REFER ENGINEER'S DRAWING FOR DETAILS. (TOP OF RAINWATER HEAD TO LINE WITH BASE OF SLOT THROUGH PANEL) 3° PITCH 2° PITCH METAL OVERFLASHING SET INTO SAWCUT IN P.C. PANEL COLORBOND FINISH PARAPET CAPPING 2° PITCH FASCIA TRUSS TO STRUCTURAL ENGINEER'S DETAILS SCALE 1 : 10@A1 A301 WALL SECTION -ANACONDA AWNING 4

NOTE: THE DIVISION WALL BETWEEN THE TWO TENANCIES REQUIRES A MINIMUM FIRE RATING OF 180/180/180.

LONG RUN METAL DECK ROOF SHEETING ON INSULATION WITH SAFETY MESH ON ROOF STRUCTURE TO ENGINEER'S DETAILS. INSULATION TO COMPLY WITH SECTION J REPORT.

RUN METAL DECK ROOF SHEETING ON INSULATION WITH SAFETY MESH ON ROOF STRUCTURE TO ENGINEER'S DETAILS. INSULATION TO COMPLY WITH SECTION J REPORT.

WALL INSULATION TO BE TAPED TO ROOF INSULATION TO GIVE CONTINUOUS SEAL TO INSULATION

PRECAST CONCRETE PANEL TO ESTRUCTURAL

PRECAST CONCRETE PANEL TO STRUCTURAL ENGINEER'S DETAILS, PAINT FINISH. REFER TO ELEVATIONS

PITCH 440

METAL CAPPING FLASHING (COLOURBOND FINISH TO MATCH ROOF) REVERSE FALL TO ROOF

LYSAGHTS MINI ORB ON TOP HAT SECTIONS FIXED TO PC PANEL, COLOUR TO MATCH ROOFING

ALL TIMBER AND STRUCTURAL DESIGN TO BE AS PER STRUCTURAL DRAWINGS.

EXTERNAL EDGE OF CAPPING FIXED TO LINING/FRAMING FIXING. EXPOSED FIXING DOWNTURN EDGES WILL REJECTED.

ALL ROOFING AND WALL LINING INSTALLED STRICTLY IN ACCORDANCE MANUFACTURER'S GUIDELINES INSTRUCTIONS.

TURN

VILLABOARD WALL LINING ON 76mm METAL STUD WALL WITH 50mm R1.4 BATT INSULATION TO MEET SECTION J REQUIREMENTS

INTERNAL HARRIS SCARFE

13mm SET PLASTERBOARD CEILING ON RONDO SUSPENSION SYSTEM

NOTE:

EXTERNAL

WATERPROOF MEMBRANE TYPICAL

SLAB AND FOOTING TO STRUCTURAL ENGINEER'S DETAIL

18 Sriniklesh Balachandran - Portfilio

LEGEND: HEIGHT IN MILLIMETRES TO DATUM LEVEL RETAIL ROOM 0 FFL FFL 0 1 TOP OF TOWER 9950 S.04 A012 EXTERNAL INTERNAL ANACONDA WATERPROOF MEMBRANE TYPICAL RC CONCRETE SLAB AND FOOTING TO STRUCTURAL ENGINEER'S DETAIL VILLABOARD WALL LINING ON 76mm METAL STUD WALL WITH 50mm R1.4 BATT INSULATION TO MEET SECTION J REQUIREMENTS PRECAST CONCRETE PANEL TO STRUCTURAL ENGINEER'S DETAILS, PAINT FINISH. REFER TO ELEVATIONS STEELWORK TO STRUCTURAL ENGINEER'S DETAILS WALL INSULATION TO BE TAPED TO ROOF INSULATION TO GIVE CONTINUOUS SEAL TO INSULATION LYSAGHTS MINI ORB ON TOP HAT SECTIONS FIXED TO PC PANEL, COLOUR TO MATCH ROOFING LONG RUN METAL DECK ROOF SHEETING ON INSULATION WITH SAFETY MESH ON ROOF STRUCTURE TO ENGINEER'S DETAILS.

METAL CAPPING FLASHING (COLOURBOND FINISH

ROOF) REVERSE FALL TO ROOF 50x150mm TIMBER LOOK ALUMINIUM BATTENS AS SPECIFIED, SCREW FIXED TO PRECAST WALL ROOF INSULATION

SECTION J REPORT GRADED TIMBER PACKER, SCREW FIXED TO PRE-CAST CONCRETE PANEL TYPICAL 50x150mm TIMBER LOOK ALUMINIUM CLIP-IN CAPPING POLISHED CONCRETE FINISH AS SPECIFIED. BARGE FLASHING 2° PITCH PARAPET 4 9500 11 A403 50x150mm TIMBER LOOK ALUMINIUM CLIP-IN CAPPING FFL 0 U/S CEILING 3000 14 TOP OF TOWER 9950 S.06 A012 BARGE FLASHING STEELWORK TO STRUCTURAL ENGINEER'S DETAILS PRECAST CONCRETE PANEL TO STRUCTURAL ENGINEER'S DETAILS, PAINT FINISH. REFER TO ELEVATIONS

FLOOR SLAB & FOOTINGS ARE SHOWN INDICATIVELY ONLY. REFER TO THE ENGINEER'S SITE SPECIFIC DRAWINGS ACTUAL REQUIREMENTS.

INSULATION TO COMPLY WITH SECTION J REPORT.

TO MATCH

TO COMPLY WITH

2°

D29

UP TRAYS AT THE UPPERMOST ROOF SHEETING. TURN DOWN GUTTERS. CONFIRM FLASHING DIMENSIONS TO FABRICATOR. ALL CAPPING FLASHING TO TOWARDS ROOF. ALL FOLDED METAL PROFILES SHALL BE 0.9mm BMT GALVANISED COLORBOND FINISH UNLESS EXPOSED AREAS OF SLAB RENDERED PAINTED BLACK. REFER TO SECTION AND J INSULATION REQUIREMENTS. CEILING INSULATION TO GIVE CONTINUOUS SEAL TO INSULATED ALL WALL FRAMING TO BE OVER CONCRETE SLAB. C.01 C.02 C.03 C.04 C.05 C.06 C.07 C.08 C.09 C.10 NOTES: CONSTRUCTION 9 10

LONG

DETAILS, PAINT FINISH. REFER TO ELEVATIONS LONG RUN METAL DECK ROOF SHEETING ON INSULATION WITH SAFETY MESH ON ROOF STRUCTURE TO ENGINEER'S DETAILS. INSULATION TO COMPLY WITH SECTION J REPORT. ANACONDA STORE ROOM HARRIS SCARFE RETAIL FURRING CHANNELS AND Min. 15mm THICK PLYWOOD IN HORIZONTAL BRICK PATTERN CAPPING FLASHING. COLORBOND FINISH TO MATCH ROOFING 150x40 FIN TIMBER RAIL FIXED TO TOP OF PRECAST CONCRETE PANNEL PRECAST CONCRETE SLAB FOOTING TO STRUCT.ENG.DETAILS POLISHED CONCRETE FINISH AS SPECIFIED. STEELWORK TO STRUCTURAL ENGINEER'S DETAILS WATERPROOF MEMBRANE TYPICAL PAINTED PLASTERBOARD WALL LINING ON 76mm METAL STUD FRAMING WITH 50mm R1.4 BATT INSULATION TO MEET SECTION J REQUIREMENTS 2° PITCH

ENGINEER'S

SCALE DRAWN CLIENT PROJECT DRAWING CHECKED APPROVED DRAWING NO. COPYRIGHT FORM 4 ARCHITECTS. COPYING, OR USE OF THIS DESIGN OR DRAWING IN PROHIBITED WITHOUT THE WRITTEN FORM 4 ARCHITECTS. CONTRACTOR SHOULD VERIFY ALL DIMENSIONS COMMENCING WORK. IF A DISCREPANCY FIGURED DIMENSIONS AND SCALED DIMENSIONS, CHECKED WITH THE PRINCIPAL THIS DOCUMENT IS NOT TO BE USED FOR CONSTRUCTION SIGNED AND ISSUED FOR CONSTRUCTION PRINCIPAL CONSULTANTS DETAILS Form 4 Architects Unit Trust T/A Form 4 ABN: 37 992 244 025 Conrad Ramakers(AIA) Nominated Architect Registrations: N6237 V18294 Q4751 W2660 T892 S3452 ANACONDA / HARRIS SCARFE KELSO LIVING DESIGN PROJECTS INGERSOLE DRIVE. KELSO, NSW CONSTRUCTION ISSUE WALL SECTIONS -SHEET LM GM A400 21165 BYDATEAMENDMENT NB16.11.22INITIAL ISSUE SCALE - 1 10@A1 A300 WALL SECTION -ANACONDA TOWER 1 SCALE 1 10@A1 A300 WALL SECTION -HS EMERGENCY EXIT 3 SCALE - 1 : 10@A1 A300 WALL SECTION -ANACONDA / HARRIS SCARFE WALL 2 Anaconda & Harris scarfe| Kelso

OVERFLASHING SET INTO SAWCUT IN P.C. PANEL

GUTTER TO STRUCTURAL ENGINEER'S DETAILS

ALL TIMBER AND STRUCTURAL STEEL SIZES AND DESIGN TO BE AS PER STRUCTURAL ENGINEER'S DRAWINGS.

EXTERNAL EDGE OF CAPPING FLASHING TO BE FIXED TO LINING/FRAMING WITH HIDDEN CLIP FIXING. EXPOSED FIXING THROUGH THE FACE DOWNTURN EDGES WILL BE REJECTED.

ALL ROOFING AND WALL LINING SHALL BE INSTALLED STRICTLY IN ACCORDANCE WITH THE MANUFACTURER'S GUIDELINES AND/OR INSTRUCTIONS.

TURN UP TRAYS AT THE UPPERMOST EDGE OF ALL ROOF SHEETING. TURN DOWN LOWEST EDGE INTO GUTTERS.

CONFIRM FLASHING DIMENSIONS ON SITE PRIOR TO FABRICATOR.

ALL CAPPING FLASHING TO HAVE REVERSE FALL TOWARDS ROOF.

ALL FOLDED

FLOOR SLAB & FOOTINGS ARE SHOWN INDICATIVELY ONLY. REFER TO THE STRUCTURAL ENGINEER'S SITE SPECIFIC DRAWINGS FOR ACTUAL REQUIREMENTS.

19 Sriniklesh Balachandran - Portfilio FFL 0 E WATERPROOF MEMBRANE TYPICAL SLAB AND FOOTING TO STRUCTURAL ENGINEER'S DETAIL STEELWORK TO

ENGINEER'S

150x40 FIN TIMBER RAIL FIXED TO TOP OF PRECAST CONCRETE PANNEL CAPPING FLASHING. COLORBOND FINISH TO MATCH ROOFING FURRING CHANNELS AND Min. 15mm THICK PLYWOOD IN HORIZONTAL

PATTERN AS SPECIFIED U/S LOADING DOCK AWNING 5500 EXTERNAL

SCARFE AWNING SUPPORT SUSPENSION ROD AS PER STRUCTURAL ENGINEER'S DETAILS POWDERCOAT FINISH TO MATCH WALL COLOUR BEYOND PARAPET 3 8500 METAL OVERFLASHING SET INTO SAWCUT IN P.C. PANEL LONG RUN METAL DECK ROOF SHEETING ON INSULATION WITH SAFETY MESH ON ROOF STRUCTURE TO ENGINEER'S DETAILS. INSULATION TO COMPLY WITH SECTION J REPORT. PRECAST CONCRETE PANEL TO ESTRUCTURAL ENGINEER'S

2° PITCH MONDOCLAD ON TOPHATS FIXED TO FASCIA TRUSS EXTERNAL SOFFIT -6mm HARDIEFLEX SHEET WITH 10mm EXPRESSED JOINTS. PAINT FINISH. 4200 LONG RUN METAL DECK ROOF SHEETING ON PURLINS TYP. 700 BOX

METAL

COLORBOND FINISH PARAPET CAPPING FASCIA TRUSS TO STRUCTURAL ENGINEER'S DETAILS 2° PITCH 2° PITCH BOX GUTTER

DETAILS NOTE:

HEIGHT IN MILLIMETRES IN RELATION TO DATUM LEVEL 0.00 -SLAB OF RETAIL ROOM 0 FFL

STRUCTURAL

DETAILS PRECAST CONCRETE PANEL TO ESTRUCTURAL ENGINEER'S DETAILS, PAINT FINISH. REFER TO ELEVATIONS

BRICK

INTERNAL HARRIS

DETAILS, PAINT FINISH. REFER TO ELEVATIONS LYSAGHTS MINI ORB ON TOP HAT SECTIONS FIXED TO PC PANEL, COLOUR TO MATCH ROOFING

TO ENGINEER'S

LEGEND:

METAL PROFILES AND FLASHINGS SHALL BE 0.9mm BMT GALVANISED METAL WITH COLORBOND FINISH UNLESS NOTED OTHERWISE. EXPOSED AREAS OF SLAB EDGE SHALL BE RENDERED PAINTED BLACK. REFER TO SECTION AND J REPORT FOR INSULATION REQUIREMENTS. TAPE WALL AND CEILING INSULATION TO GIVE TO GIVE CONTINUOUS SEAL TO INSULATED ENVELOPE. ALL WALL FRAMING TO BE LAID ON DPC/FLASHING OVER CONCRETE SLAB. C.01 C.02 C.03 C.04 C.05 C.06 C.07 C.08 C.09 C.10 NOTES: CONSTRUCTION SCALE DRAWN CLIENT PROJECT DRAWING CHECKED APPROVED DRAWING NO. REV. COPYRIGHT FORM ARCHITECTS. COPYING, REPRODUCTION OR USE OF THIS DESIGN OR DRAWING IN WHOLE OR PART IS PROHIBITED WITHOUT THE WRITTEN CONSENT OF FORM 4 ARCHITECTS. CONTRACTOR SHOULD VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK. IF A DISCREPANCY IS FOUND BETWEEN FIGURED DIMENSIONS AND SCALED DIMENSIONS, IT SHALL BE CHECKED WITH THE PRINCIPAL CONSULTANT. THIS DOCUMENT IS NOT TO BE USED FOR CONSTRUCTION UNLESS SIGNED AND ISSUED FOR CONSTRUCTION PRINCIPAL CONSULTANTS DETAILS Form 4 Architects Unit Trust T/A Form 4 Architects ABN: 37 992 244 025 Conrad Ramakers(AIA) Nominated Architect for Registrations: N6237 V18294 Q4751 W2660 T892 S3452 A ANACONDA / HARRIS SCARFE KELSO LIVING DESIGN PROJECTS INGERSOLE DRIVE. KELSO, NSW 2795 CONSTRUCTION ISSUE WALL SECTIONS -SHEET 3 LM GMA402 21165 SCALE 1 10@A1 A301 WALL SECTION -HS LOADING AWNING 5 BYDATEAMENDMENT REV NB16.11.22INITIAL ISSUE A AS SHOWN Anaconda & Harris scarfe| Kelso

FLASHING TO BE FIXED TO LINING/FRAMING WITH HIDDEN CLIP FIXING. EXPOSED FIXING THROUGH THE FACE DOWNTURN EDGES WILL BE REJECTED.

ROOFING AND WALL LINING SHALL BE INSTALLED STRICTLY IN ACCORDANCE WITH THE MANUFACTURER'S GUIDELINES AND/OR INSTRUCTIONS.

TURN UP TRAYS AT THE UPPERMOST EDGE OF ALL ROOF SHEETING. TURN DOWN LOWEST EDGE INTO GUTTERS. CONFIRM

20 Sriniklesh Balachandran - Portfilio FFL 0 PARAPET 1 6900 U/S CEILING 3000 PARAPET 2 8000 CAPPING FLASHING. COLORBOND FINISH TO MATCH ROOFING GRADED TIMBER PACKER, SCREW FIXED TO PRE-CAST CONCRETE PANEL TYPICAL LYSAGHTS MINI ORB ON 25mm TOP HAT SECTIONS FIXED TO PC PANEL, COLOUR TO MATCH ROOFING METAL FLASHING 1.0mm BMT RETURN PRECAST CONCRETE PANEL TO STRUCTURAL ENGINEER'S DETAILS, PAINT FINISH. REFER TO ELEVATION HARRIS SCARFE LOGO -TO BE SUPPLIED & INSTALLED BY HARRIS SCARFE BITUMEN IMPREGNATED FOAM/FILLER MATERIALMAESTIC WATERPROOF MEMBRANE TYPICAL PRECAST CONCRETE SLAB FOOTING TO STRUCT.ENG.DETAILS 13mm SET PLASTERBOARD CEILING, PAINT FINISH. LIGHTWEIGHT AWNING STRUCTURE TO ENGINEER'S DETAILS. MONDOCLAD FINISH ON TOP HATS 12mm MARINE PLYWOOD WITH SEALED JOINTS, TYPICAL. LONG RUN METAL DECK ROOF SHEETING ON PURLINS TYP. EXTERNAL HARRIS SCARFE FOYER METAL OVERFLASHING SET INTO SAWCUT IN P.C. PANEL S.01 A012 W06 600 2° PITCH FOLDED METAL COVER PLATE NOTE: FLOOR SLAB & FOOTINGS ARE SHOWN INDICATIVELY ONLY. REFER TO THE STRUCTURAL ENGINEER'S SITE SPECIFIC DRAWINGS FOR ACTUAL REQUIREMENTS. LEGEND: HEIGHT IN MILLIMETRES IN RELATION TO DATUM LEVEL 0.00 -SLAB OF RETAIL ROOM 0 FFL FFL 0 PARAPET 1 6900 U/S CEILING 3000 A PARAPET 2 8000 BITUMEN IMPREGNATED FOAM/FILLER MATERIAL -MAESTIC ROOF STRUCTURE TO STRUCT. ENGINEER'S DETAILS HARRIS SCARFE FOYER HARRIS SCARFE RETAIL PRECAST CONCRETE SLAB FOOTING TO STRUCT.ENG.DETAILS AUTO DOOR & MECHANISM AS SPECIFIED AUTO DOOR SLIDING LEAF AND SIDELIGHTS BY AUTO DOOR SUPPLIER. BOX GUTTER AS PER ENG.'S DETAILS WALL HEADER TO STRUCTURAL ENGINEER'S DETAILS 13mm SET PLASTERBOARD CEILING ON RONDO SUSPENSION SYSTEM PROVIDE CONTROL JOINT WITH SEALANT AT DOOR THRESHOLD WATERPROOF MEMBRANE TYPICAL D06 W06 LONG RUN METAL DECK ROOF SHEETING ON INSULATION WITH SAFETY MESH ON ROOF STRUCTURE TO ENGINEER'S DETAILS. INSULATION TO COMPLY WITH SECTION J REPORT. PAINTED PLASTERBOARD WALL LINING ON LIGHTWEIGHT FRAMING TO ENGINEER'S DETAILS WITH 50mm R1.4 BATT INSULATION TO MEET SECTION J REQUIREMENTS 1 0 0 70 20 25 150 PRECAST CONCRETE PANEL GRADED TIMBER PACKER, TAPER CUT TO PROVIDE REVERSE FALL. SCREW FIXED TO TOP OF P.C. PANEL CAPPING FLASHING 1.0mm BMT REVERSE FALL TO ROOF PENCIL ROUND TYPICAL HIDDEN CLIP FIXING TO FACE VERTICAL TIMBER LOOK ALUMINIUM BATTENS FIXED TO PRECAST WALL AS SPECIFIED LYSAGHTS MINI ORB ON 25mm TOP HAT SECTIONS FIXED TO PC PANEL, COLOUR TO MATCH ROOFING 2° PITCH ALL TIMBER AND STRUCTURAL STEEL SIZES AND DESIGN TO BE AS PER STRUCTURAL ENGINEER'S DRAWINGS. EXTERNAL EDGE OF CAPPING

ALL

FLASHING DIMENSIONS ON SITE PRIOR TO FABRICATOR. ALL CAPPING FLASHING TO HAVE REVERSE FALL TOWARDS ROOF. ALL FOLDED METAL PROFILES AND FLASHINGS SHALL BE 0.9mm BMT GALVANISED METAL WITH COLORBOND FINISH UNLESS NOTED OTHERWISE. EXPOSED AREAS OF SLAB EDGE SHALL BE RENDERED PAINTED BLACK. REFER TO SECTION AND J REPORT FOR INSULATION REQUIREMENTS. TAPE WALL AND CEILING INSULATION TO GIVE TO GIVE CONTINUOUS SEAL TO INSULATED ENVELOPE. ALL WALL FRAMING TO BE LAID ON DPC/FLASHING OVER CONCRETE SLAB. C.01 C.02 C.03 C.04 C.05 C.06 C.07 C.08 C.09 C.10 NOTES: CONSTRUCTION SCALE DRAWN CLIENT PROJECT DRAWING CHECKED APPROVED DRAWING NO. REV. COPYRIGHT FORM 4 ARCHITECTS. COPYING, REPRODUCTION OR USE OF THIS DESIGN OR DRAWING IN WHOLE OR PART IS PROHIBITED WITHOUT THE WRITTEN CONSENT OF FORM ARCHITECTS. CONTRACTOR SHOULD VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK. IF A DISCREPANCY IS FOUND BETWEEN FIGURED DIMENSIONS AND SCALED DIMENSIONS, IT SHALL BE CHECKED WITH THE PRINCIPAL CONSULTANT. THIS DOCUMENT IS NOT TO BE USED FOR CONSTRUCTION UNLESS SIGNED AND ISSUED FOR CONSTRUCTION PRINCIPAL CONSULTANTS DETAILS Form 4 Architects Unit Trust T/A Form 4 Architects ABN: 37 992 244 025 Conrad Ramakers(AIA) Nominated Architect for Registrations: N6237 V18294 Q4751 W2660 T892 S3452 A ANACONDA / HARRIS SCARFE KELSO LIVING DESIGN PROJECTS INGERSOLE DRIVE. KELSO, NSW 2795 CONSTRUCTION ISSUE WALL SECTIONS -SHEET 4 LM GMA403 21165 SCALE 1 10@A3 A301 WALL SECTION -HS ENTRY FOYER WALL 2 7 BYDATEAMENDMENT REV NB16.11.22INITIAL ISSUE A SCALE - 1 10@A1 A301 WALL SECTION -HS ENTRY FOYER WALL 1 6 SCALE 1 5@A1 A400 CAPPING DETAIL SECTION 11 AS SHOWN Anaconda & Harris scarfe| Kelso

KFC MORISSET | GATEWAY BOULEVARDE

In this endeavor, our task involved enhancing both the interior arrangement and external components of the structure to align with KFC’s present-day criteria. The existing building design was meticulously recreated using Revit, and the envisioned modifications were crafted to present various alternatives for the client’s consideration. Achieving precision in the layout required meticulous measurement of the current configuration, resulting in the creation of accurate as-built drawings. By incorporating the client’s preferences and ensuring compliance with standards, we formulated a comprehensive package for development approval (DA package).

LOCATION:

2/5-11 Gateway Boulevard Morisset NSW 2264

DEVELOPED FOR: Sandyshore PTY LTD

SKILLS APPLIED: Revit model management, Concept Design, Preliminary Documentation and DA.

KEY ITEMS HANDLED: Model management, Existing building modeled Preliminary drawings developed and Revit families developed.

21 Sriniklesh

Balachandran - Portfilio

KFC

Morisset | Gateway Boulevarde

22 Sriniklesh Balachandran - Portfilio DN 3A 2A 1 2 3 A1 B1 A B 1A DINING AREA SERVERY PICK UP POINT ORDER PONT MANAGER CLEANER

FREZER CHICKEN COOL ROOM DELIVERY REFUSE AREA BURGER LINE COOK LINE BREADING D/T PICKUP POINT D/T PAY POINT DRY GOODS PACK LINE DRINKS COOL ROOM FEMALE/ ACCESSABLE MALE/ ACCESSABLE EXTERNAL SEATING AREA (COVERED) ENTRY CT CT CT CT CT CT CTCT DIST. BOARD 8H8H8H8H8H CFN BW ISS MERCH MERCH FC FCB FC SH1 SH1 SH1SH1 SH1 SH1 D/DUN D/DUN D/DUND/DUN D/DUN SH1 STAFF DRINKING WATER SOAK TANK EX. COL EX. COL EX. COL EX. COL EX. COL DUMPSTER EX.BURGER DUMPSTER RD CO2 WHB2 /SD/HD WHB1 /SD/HD EX. LANDSCAPE EX. COL EX. COL EX. COL EX. COL BOL BOL BOL BUN EX. LANDSCAPE EX. LANDSCAPE EX LANDSCAPE EX. LANDSCAPE RETANEDAWNNGOVER AWNING OVER AWNING OVER EX. LANDSCAPE TO BE REMOVED EX. ROLLER DOOR BUCKET WASTE R R R R R X-A A X-B A X-C A201 X-D A201 HYD SC MIX 9.60 FFL 9.39 9.52 9.59 (EX) 8.50 (EX) (EX) (EX) (EX) (EX) EX. PYLON SIGN TO BE RETAINED AND REFACED SAFE 9.30 8.80 BTFS1 BTFS2 BTFS3 OV PP 4A 5A C1 D1 E1 F1 G1 RETA NED AWN NG OVER AWNING OVER TO BE RELOCATED GENERAL: OTHER: BOL EXISTING BOLLARD WHB WASH HAND BASINS (BOH) EXISTING WALL TO BE RETAINED LANDSCAPE EXITING WALLS/ EQUIPMENTS/ LANDSCAPE/ SLAB/ FURNITURES JOINERY SCREENS FITTINGS FIXTURES TO BE DEMOLISHED RELOCATED EQUIPMENTS EX. LANDSCAPE AREA TO BE REMOVED EX.COL EXISTING COLUMN RL PROPOSED SITE LEVEL DRAWN CONTRACTOR SHOULD VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK. DISCREPANCY IS FOUND BETWEEN FIGURED DIMENSIONS AND SCALED DIMENSIONS, IT SHALL BE CHECKED WITH THE PRINCIPAL CONSULTANT. THIS DOCUMENT IS NOT TO BE USED FOR CONSTRUCTION UNLESS SIGNED AND ISSUED FOR CONSTRUCTION PRINCIPAL CONSULTANTS DETAILS Form Architects Unit Trust T/A Form Architects ABN: 37 992 244 025 Conrad Ramakers(AIA) Nominated Architect for Registrations: N6237 V18294 Q4751 W2660 T892 S3452 CLIENT PROJECT DRAWING COPYRIGHT FORM ARCHITECTS. COPYING OR REPRODUCTION OR USE OF THIS DESIGN OR DRAWING IN WHOLE OR PART IS PROHIBITED WITHOUT THE WRITTEN CONSENT OF FORM 4 ARCHITECTS KFC MORISSET 2/5-11 GATEWAY BOULEVARD, MORISSET NSW 2264 FLOOR PLAN -EXISTING / DEMOLITION NB FAF1 ISSUE SANDYSHORE PTY LTD SCALE 50@A1 A200 EXISTING DEMOLITION FLOOR PLAN 1 BYDATEAMENDMENT REV NB16.03.23INITIAL ISSUE A HA21.03.23NOTES REVISED B HA19.04.23ELEVATION REVISEDC HA10.05.23DRY GOODS REVISEDD 3A 1 2 3 A B 1A MANAGER W SHUPAREA CHICKEN COOL ROOM DELIVERY COOK LINE D/T PICKUP POINT D/T PAY POINT PACK LINE SEATING AREA CT CTCT DIST. BOARD 8H8H8H8H8H MERCH FCB FC SH1 D/DUN SOAK TANK EX. EX. CO2 WHB2 /SD/HD EX. LANDSCAPE EX. COL EX. COL EX. COL EX. COL BOL BOL EX. LANDSCAPE EX. LANDSCAPE E EX. LANDSCAPE AWNING OVER AWNING OVER EX. LANDSCAPE TO BE REMOVED R R R X-C A201 X-D A201 9.39 9.52 9.59 (EX) (EX) (EX) (EX) EX. PYLON SIGN TO BE RETAINED AND REFACED SAFE 9.30 BTFS1 OV PP E1 F1 G1 WNIN GENERAL: OTHER: EXISTING BOLLARD WHB WASH HAND BASINS (BOH) EXISTING WALL TO BE RETAINED LANDSCAPE EXITING WALLS/ EQUIPMENTS/ LANDSCAPE/ SLAB/ FURNITURES JOINERY SCREENS / FITTINGS & FIXTURES TO BE DEMOLISHED RELOCATED EQUIPMENTS EX. LANDSCAPE AREA TO BE REMOVED EXISTING COLUMN PROPOSED SITE LEVEL CONTRACTOR SHOULD VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK. IF A DISCREPANCY IS FOUND BETWEEN FIGURED DIMENSIONS AND SCALED DIMENSIONS, IT SHALL BE CHECKED WITH THE PRINCIPAL CONSULTANT. THIS DOCUMENT IS NOT TO BE USED FOR CONSTRUCTION UNLESS SIGNED AND ISSUED FOR CONSTRUCTION PRINCIPAL CONSULTANTS DETAILS Form 4 Architects Unit Trust T/A Form 4 Architects ABN: 37 992 244 025 Conrad Ramakers(AIA) Nominated Architect for Registrations: N6237 V18294 Q4751 W2660 T892 S3452 COPYRIGHT FORM 4 ARCHITECTS. COPYING OR REPRODUCTION OR USE OF THIS DESIGN OR DRAWING IN WHOLE OR PART IS PROHIBITED WITHOUT THE WRITTEN CONSENT OF FORM 4 ARCHITECTS FAF1 ISSUE SANDYSHORE PTY LTD EXISTING DEMOLITION FLOOR PLAN BYDATEAMENDMENT REV NB16.03.23INITIAL ISSUE A HA21.03.23NOTES REVISED B HA19.04.23ELEVATION REVISEDC HA10.05.23DRY GOODS REVISEDD A2 C A20 B A 00 A 2 D 3A 2A 1 2 3 A1 B1 A B 1A 1200 1270 DIST. BOARD SH SH SH SOAK TANK SH CT CT CT CT CT CT CT CT CT CT CT CT CT CT 8H 8H 8H 8H 8H EX. COL EX. COL EX. COL EX. COL EX. COL S/DUN S/DUN S/DUN S/DUN S/DUNS/DUNS/DUN D/DUN S/DUN CFN FC MERCH MERCH FCB FC FCB 1200 S/DUN S/DUN S/DUN S/DUN S/DUNS/DUNS/DUN S/DUN SH1 DINING AREA PICK UP POINT ORDER PONT MANAGER WASHUP AREA FREZER CHICKEN COOL ROOM DELIVERY BURGERLINE COOK LINE BREADING D/T PICKUP POINT D/T PAY POINT DRY GOODS PACK LINE DRINKS COOL ROOM FEMALE/ ACCESSABLE MALE/ ACCESSABLE ENTRY CLEANER A300 A300 C A300 BIN BIN OV RD ISS BT FFFF WHB1 EX. COL EX. COL EX. COL EX. COL BOLBOL BOL BOL BUN CO2 L NE OF AWNING OVER EX. LANDSCAPE EX. LANDSCAPE EX. LANDSCAPE EX ANDSCAPE EX. LANDSCAPE NEW LANDSCAPE D/T ORDER POINT RELOCATEDAWNNGOVER AWNING OVER AWNING OVER HC 903 HC 903 HC 903 BS EX.BURGER BENCH NEW BURGER BENCH WASTEBUCKET 1500 1200 1050 1500 STAFF WC HYD SC MIX R R R SAFE 9.39 9.52 9.59 (EX) 9.20 9.10 (NEW) 8.50 9.56 (NEW) (EX) (EX) (EX) (EX) 9.60 FFL WHB1 HTDSD WHB2 SD HD HOLE WC TPH STAFF DRINKING WATER BTFS1 BTFS2 BTFS3 NEW MAIN HOOD OVER EX. CHIP HOOD OVER 4A 5A C1 D1 E1 F1 G1 EX. PYLON SIGN TO BE RETAINED AND REFACED FCB 1 20 SH 1082 EX. LANDSCAPE RETANEDAWNNGOVER RETA NED AWNING OVER BIN NEW ROLLER DOOR GENERAL: OTHER: BOL EXISTING WHB WASH NEW EXISTING LANDSCAPE NEW RELOCATED NEW NEW MURALS/SIGNAGE BUCKET REFER BTFS EX.COL EXISTING RL PROPOSED FOH SHEETS DRAWN CONTRACTOR SHOULD COMMENCING WORK. FIGURED DIMENSIONS CHECKED WITH THIS DOCUMENT IS NOT SIGNED AND PRINCIPAL CONSULTANTS Form Architects Unit ABN: 37 992 244 025 Conrad Ramakers(AIA) N6237 V18294 Q4751 CLIENT PROJECT DRAWING DRAWING NO. COPYRIGHT REPRODUCTION WHOLE OR PART CONSENT KFC MORISSET A101 2/5-11 GATEWAY NSW 2264 FLOOR PLAN NB 21166 SANDYSHORE SCALE 50@A1 A200 PROPOSED FLOOR PLAN 1 BYDATEAMENDMENT NB16.03.23INITIAL HA21.03.23NOTES HA19.04.23ELEVATION HA10.05.23DRY A201 D 1 2 3 A B SH TANK 8H S/DUN S/DUNS/DUNS/DUN S/DUN MERCH FCB 1200 S/DUNS/DUNS/DUN MANAGER CHICKEN COOL ROOM DELIVERY E BREADING DRINKS COOL FEMALE/ ACCESSABLE MALE/ A A300 BIN FFFF BOLBOL EX. LANDSCAPE LANDSCAPE AWNING OVER AWNING OVER BEN 1050 9.39 NEW MAIN HOOD OVER EX. CHIP HOOD OVER F1 G1 EX. PYLON SIGN TO BE RETAINED AND REFACED GENERAL: OTHER: EXISTING BOLLARD WHB WASH HAND BASINS (BOH) NEW 75mm COOLROOM WALL EXISTING WALL TO BE RETAINED LANDSCAPE NEW 150mm FREEZER WALL RELOCATED EQUIPMENTS NEW LANDSCAPE NEW EQUIPMENTS, FURNITURE, JOINERY, MURALS/SIGNAGE EXISTING COLUMN FOH LAYOUT, REFER TO INTERIOR DESIGN SHEETS CONTRACTOR SHOULD VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK. IF A DISCREPANCY IS FOUND BETWEEN FIGURED DIMENSIONS AND SCALED DIMENSIONS, IT SHALL BE CHECKED WITH THE PRINCIPAL CONSULTANT. THIS DOCUMENT IS NOT TO BE USED FOR CONSTRUCTION UNLESS SIGNED AND ISSUED FOR CONSTRUCTION COPYRIGHT FORM 4 ARCHITECTS. COPYING OR REPRODUCTION OR USE OF THIS DESIGN OR DRAWING IN WHOLE OR PART IS PROHIBITED WITHOUT THE WRITTEN CONSENT OF FORM 4 ARCHITECTS BYDATEAMENDMENT REV NB16.03.23INITIAL ISSUE A HA21.03.23NOTES REVISED B HA19.04.23ELEVATION REVISEDC HA10.05.23DRY GOODS REVISEDD KFC Morisset | Gateway Boulevarde 1 2 3 DRINKS COOL ROOM DRY GOODS AREA CHICKEN COOL ROOM CH2800 CH2300 CH3000 2º FALL CH2800 EX.ROOF COOK LINE D/T PAY POINT CH3000 FFL 9600.0 PARAPET 1 14100.0 PARAPET 2 14300.0 TOP OF TOWER 16800.0 CH FOH 12400.0 NEW D/T PICKUP POINT NEW ROOF STRUCTURE OVER D/T TO ENGINEER`S DETAILS CH2800 NEW D/T PICKUP POINT EXTENSION NEW FEATURE FACADE PACK LINE EX.ROOF 600 3200 600 2800 750 460 TOP OF TOWER 16800.0 CONTRACTOR SHOULD VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK. IF A DISCREPANCY IS FOUND BETWEEN FIGURED DIMENSIONS AND SCALED DIMENSIONS, IT SHALL BE CHECKED WITH THE PRINCIPAL CONSULTANT. THIS DOCUMENT IS NOT TO BE USED FOR CONSTRUCTION UNLESS SIGNED AND ISSUED FOR CONSTRUCTION COPYRIGHT FORM 4 ARCHITECTS. COPYING OR REPRODUCTION OR USE OF THIS DESIGN OR DRAWING IN WHOLE OR PART IS PROHIBITED WITHOUT THE WRITTEN CONSENT OF FORM 4 ARCHITECTS SCALE - 1 50@A1 A101 SECTION A A SCALE - 1 50@A1 A101 SECTION B B BY DATE AMENDMENT REV NB 16.03.23 INITIAL ISSUE A HA 19.04.23 ELEVATION REVISED B

WASHUPAREA

23 Sriniklesh Balachandran - Portfilio SCALE SCALE EXISTING ELEVATION-NORTH X-A EXISTING ELEVATION-WEST X-B 9.60 ENTRY PICK-UP PT. DRIVE-THRU ORDER PT. DRIVE-THRU FFL 0.0 PARAPET 4500.0 TOP OF TOWER 7200.0 FFL 0.0 PARAPET 4500.0 TOP OF TOWER 7200.0 TIMBER SLAT LINING TO FASCIA 1800750 A1001:100 @ A1 A1001:100 @ A1 FFL 9600.0 PARAPET 1 14100.0 TOP OF TOWER 16800.0 TH BL T1 BL BEYOND T1 M1 R BEYOND M1 A013 S.20 ILLUMINATED COLONEL'S SIGNAGE 2000x2000mm R A013 S.21 ILLUMINATED WHITE KFC LETTERS750mm HIGH BL-M A013 S.06 A013 S.23 FFL 9600.0 PARAPET 1 14100.0 PARAPET 2 14300.0 TOP OF TOWER 16800.0 2700 4500 BEYOND M1 A013 S.20 BL M1 R CB TH BL-M DENOTES TAG REFERRING TO SCOPE OF WORKS NOTES 21166/A002 X.XX DENOTES SIGN TYPE S.XX REFER TO DRAWING 22102-A012 FOR SIGN DETAILS. S.XX A012 GENERAL LED STRIP PRODUCT: TOP BEND HELIFLEX NEON FLEX PROFILE HF1616TB SUPPLIER: LIGHTSEARCH REFER TO ELECTRICAL ENGINEER'S DOCUMENTATION FOR DETAILS. SCALE DRAWN CONTRACTOR SHOULD VERIFY ALL DIMENSIONS ON SITE COMMENCING WORK. IF A DISCREPANCY IS FOUND FIGURED DIMENSIONS AND SCALED DIMENSIONS, IT CHECKED WITH THE PRINCIPAL CONSULTANT. THIS DOCUMENT IS NOT TO BE USED FOR CONSTRUCTION SIGNED AND ISSUED FOR CONSTRUCTION PRINCIPAL CONSULTANTS DETAILS Form 4 Architects Unit Trust T/A Form 4 Architects ABN: 37 992 244 025 Conrad Ramakers(AIA) Nominated Architect for N6237 V18294 Q4751 W2660 T892 S3452 CLIENT PROJECT DRAWING DRAWING NO. AS SHOWN COPYRIGHT FORM ARCHITECTS. COPYING REPRODUCTION OR USE OF THIS DESIGN OR DRAWING WHOLE OR PART IS PROHIBITED WITHOUT THE CONSENT OF FORM 4 ARCHITECTS KFC MORISSET A200 2/5-11 GATEWAY BOULEVARD, MORISSET NSW 2264 ELEVATIONS -SHEET 1 NB 21166 FAF1 ISSUE SANDYSHORE PTY LTD SCALE 1 50@A1 A101 Proposed Elevation-NORTH A SCALE 1 50@A1 A101 Proposed Elevatio-WEST B BYDATEAMENDMENT NB16.03.23INITIAL ISSUE HA21.03.23NOTES REVISED HA19.04.23ELEVATION REVISEDC HA10.05.23ELEVATIONS REVISEDD KFC Morisset | Gateway Boulevarde

24 Sriniklesh Balachandran - Portfilio KFC Morisset | Gateway Boulevarde SCALE SCALE EXISTING ELEVATION-SOUTH X-C EXISTING ELEVATION-EAST X-D 9.60 DUMPSTER AREA PICK-UP PT. DRIVE-THRU ORDER PT. DRIVE-THRU FFL 0.0 TOP OF PARAPET 4700.0 TOP OF TOWER 7200.0 FFL 0.0 TOP OF PARAPET 4700.0 TOP OF TOWER 7200.0 1800 HIGH GLAZED SCREEN DOOR BOL. ROLLER SHUTTER BOL. FIBRE CEMENT SHEET WITH EXPRESSED JOINTS FRAMELESS GLAZING MENU BOARD TIMBER SLAT LINING TO FASCIA DP 2800 7950 4500 A100 1:100 @ A1 A1001:100 @ A1 FFL 9600.0 PARAPET 1 14100.0 PARAPET 2 14300.0 TOP OF TOWER 16800.0 B A013 S.16 A013 S.04 A013 S.03 BL M1 R CB CB TH BL BL-M W BL-M FFL 9600.0 PARAPET 1 14100.0 PARAPET 2 14300.0 TOP OF TOWER 16800.0 A013 S.24 ILLUMINATED 'KENTUCKY FRIED CHICKEN' SITE BOUNDARY (BEYOND) BL-M BL-M R BL T1 BL TH CB DENOTES TAG REFERRING TO SCOPE OF WORKS NOTES 21166/A002 X.XX DENOTES SIGN TYPE S.XX REFER TO DRAWING 22102-A012 FOR SIGN DETAILS. S.XX A012 GENERAL LED STRIP PRODUCT: TOP BEND HELIFLEX NEON FLEX PROFILE HF1616TB SUPPLIER: LIGHTSEARCH REFER TO ELECTRICAL ENGINEER'S DOCUMENTATION FOR DETAILS. SCALE DRAWN CONTRACTOR SHOULD VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK. IF A DISCREPANCY IS FOUND BETWEEN FIGURED DIMENSIONS AND SCALED DIMENSIONS, IT SHALL BE CHECKED WITH THE PRINCIPAL CONSULTANT. THIS DOCUMENT IS NOT TO BE USED FOR CONSTRUCTION UNLESS SIGNED AND ISSUED FOR CONSTRUCTION PRINCIPAL CONSULTANTS DETAILS Form 4 Architects Unit Trust T/A Form 4 Architects ABN: 37 992 244 025 Conrad Ramakers(AIA) Nominated Architect for Registrations: N6237 V18294 Q4751 W2660 T892 S3452 CLIENT PROJECT DRAWING DRAWING NO. REV. AS SHOWN COPYRIGHT FORM 4 ARCHITECTS. COPYING OR REPRODUCTION OR USE OF THIS DESIGN OR DRAWING IN WHOLE OR PART IS PROHIBITED WITHOUT THE WRITTEN CONSENT OF FORM ARCHITECTS D KFC MORISSET A201 2/5-11 GATEWAY BOULEVARD, MORISSET NSW 2264 ELEVATIONS -SHEET 2 NB 21166 FAF1 ISSUE SANDYSHORE PTY LTD SCALE - 1 50@A1 A101 Proposed Elevation-SOUTH C SCALE - 1 50@A1 A101 Proposed Elevation-EAST D BYDATEAMENDMENT REV NB16.03.23INITIAL ISSUE A HA21.03.23NOTES REVISED B HA19.04.23ELEVATION REVISEDC HA10.05.23ELEVATIONS REVISEDD

KFC PORT MACQUARIE

The existing facility was deemed insufficient to meet the evolving needs of the client, prompting the decision to extend the building and improve its front-of-house section. This expansion aimed to create additional space to accommodate new functions, services, or equipment required by the client’s operations. The interior spaces of the front portion were redesigned to align with the client’s updated criteria and needs. Given that this undertaking involves both renovation and expansion, the consultants played a vital role in furnishing the necessary electrical, mechanical, and structural plans.

LOCATION:

Junction Pacific & Oxley Highways Port Macquarie Center NSW

DEVELOPED FOR:

Scutts Restaurant Group

SKILLS APPLIED:

Revit Model Management, Concept Design, Preliminary Drawings Developed, DA, Interior Design and Joinery Detailing.

KEY ITEMS HANDLED: Model management, Preliminary documentation, Coordinated with Consultants, Interior design options and Rendering.

25 Sriniklesh

Balachandran - Portfilio

CONTRACTOR COMMENCING FIGURED THIS DOCUMENT PRINCIPAL REPRODUCTION WHOLE BY NB HA KFC Port Macquarie

26 Sriniklesh Balachandran - Portfilio PM LA1 LA2 LA3 LA5 LA6 ST CS1 UP1 UP2 LA7 TP LA9 PERFORATED METAL PERFORATED METAL TYPE: R03341 -3mm THICKNESS DIA.-3.25mm CENTRES-4.78mm 41% OPEN AREA ALLOW 5mm SOLID BORDER LOCKER GROUP PH: (07) 3859 8300 FEATURE LAMINATE FEATURE LAMINATE COLOUR: JARRAH LEGNO 143 FINISH: CHALK FINISH LAMINEX CONTACT: CUSTOMER SERVICE PH: 132 136 FEATURE LAMINATE FEATURE LAMINATE COLOUR: ELEGANT OAK 078 FINISH: CHALK COMPACT LAMINATE COMPACT LAMINATE SURFACE SQUARED "BLACK" 3mm SHEET SIZE: 2400x1200mm SURFACE SQUARED CONTACT: EMMALEA DURICIN MOB 0438 004 504 PH: 1300 722 113 LAMINEX CONTACT: CUSTOMER SERVICE PH: 132 136 FEATURE LAMINATE FEATURE LAMINATE RANGE/COLOUR: DEKOPLUS-MT05(BLACK) NOTE: NOT AVAILABLE ON BOARD TYPICALLY BUT CAN BE REQUESTED AT TIME OF ORDER DEKOPLUS BY SURTECO CONTACT: PHIL NANKIVELL MOB: 0418 363 781 PH: (02)9421 0300 FEATURE LAMINATE FFEATURE LAMINATE (RED) WILSONART LAMINATE COLOUR: REGIMENTAL RED FINISH: PREMIUM AEON FINISH WILSONART CONTACT: CUSTOMER SERVICE PH 1300 910 957 SOLID TIMBER SOLID TIMBER SPECIES: DAR CROWN CUT AMERICAN WHITE OAK. NOTE SOLID TIMBERALLOW SPRAY FINISH TONAL STAIN SUCH THAT OAK MATCHES LA4 LAMINATE AS CLOSELY AS POSSIBLE. ALLOW LOW SHEEN, CLEAR, UV STABLE POLYURETHANE STAIN WILSONART CONTACT: CUSTOMER SERVICE PH 1300 910 957 CORIAN CORIAN SOLID SURFACE COLOUR: VENARO WHITE CASF AUSTRALIA CONTACT: CUSTOMER SERVICE PH: 1300 795 044 EMAIL:info@casf.com.au UPHOLSTERY FABRICS VINYL UPHOLSTERY FABRIC VINYL UPHOLSTERY FABRIC DESIGN: ACCENT VINYL COLOUR: SHADOW (BLACK) INSTYLE PH (02)9317 0222 VINYL UPHOLSTERY FABRIC DESIGN: ACCENT VINYL COLOUR: DESERT (TAN) INSTYLE PH (02)9317 0222 VINYL UPHOLSTERY FABRIC COMPACT LAMINATE COMPACT LAMINATE (BLACK) LAMINEX LAMINATE COLOUR: BLACK FINISH: NATURAL FINISH LAMINEX CONTACT: CUSTOMER SERVICE PH: 132 136 TOILET PARTITION NUVEX SANIBOARD TOILET PARTITION COLOUR: PURE WHITE SHEET SIZE: 3600x1800mm, 19mm THICK NUVEX CONTACT: AUSTRALIA PH 1800 170 001 1. 1. FOH -PARTITIONS 1. DINING AREA -TABLE TOP 1. DINING AREA 1. DINING AREA -BENCHES, PARTITIONS, KIOSK UNIT 1. FOH -KIOSK UNIT (MENUBOARD SUPPORT PANEL) -TOILET DOOR LEAVES -INSIDE OF COUNTER 1. DINING AREA -BIN UNITS 1. DINING AREA -MESH PARTITIONS 1. DINING AREA (FOH) COUNTER -DINING AREA (FOH) 1. DINING AREA (FOH) 1. DINING AREA (FOH) COMPACT LAMINATE COMPACT LAMINATE (WHITE) LAMINEX COMPACT LAMINATE -MULTIPURPOSE COLOUR: "WHITE NATURAL" 200 (NATURAL FINISH) SHEET SIZE: 3660x1820x13mmTHK LAMINEX CONTACT: CUSTOMER SERVICE PH: 132 136 1. FOH GENERAL FINISHES SCHEDULE CODE TYPE FINISH SPECIFICATION LOCATION SAMPLE PICTURE (FOR REFERENCE ONLY) NOTES SUPPLIER DETAILS 1. APPLIED TO 6mm OR 18mm HMR MDF SUBSTRATE WITH MATCHING ABS EDGEING 2. ENSURE CLEAR COAT TO FACE & EDGES OF PANEL. 3. DIRECTION OF GRAIN HORIZONTAL. 4. STANDARD OR COMPACT LAMINATE. 2. PIGEON HOLES SURFACE FINISHES LA8 FEATURE LAMINATE FEATURE LAMINATE COLOUR: BLACK 460 FINISH: ABSOLUTE MATTE LAMINEX CONTACT: CUSTOMER SERVICE PH: 132 136 1. PIGEON HOLES 1. APPLIED TO 6mm OR 18mm HMR MDF SUBSTRATE WITH MATCHING ABS EDGEING 2. ENSURE CLEAR COAT TO FACE & EDGES OF PANEL. 3. STANDARD OR COMPACT LAMINATE. T2 TIMBER LOOK ALUMINIUM BATTENS RANGE: ONE-PIECE BATTENS BY DECOBATTEN SUPPLIER DECO COLOR COASTAL SPOTTED GUM SIZE 50 x 100 mm 1. INSTALLED VERTICALLY. 1. REFER TO INTERNAL ELEVATIONS DECO AUSTRALIA CONTACT:info@deco.net.au PH: 02 9603 1888 ALUMINIUM TIMBER LOOK BATTENS 1. FOH -TOILETS CONTRACTOR SHOULD VERIFY ALL DIMENSIONS ON SITE BEFORE COMMENCING WORK. IF A DISCREPANCY IS FOUND BETWEEN FIGURED DIMENSIONS AND SCALED DIMENSIONS, IT SHALL BE CHECKED WITH THE PRINCIPAL CONSULTANT. THIS DOCUMENT IS NOT TO BE USED FOR CONSTRUCTION UNLESS SIGNED AND ISSUED FOR CONSTRUCTION PRINCIPAL CONSULTANTS DETAILS Form 4 Architects Unit Trust T/A Form 4 Architects Conrad Ramakers(AIA) Nominated Architect for Registrations: N6237 V18294 Q4751 W2660 T892 S3452 COPYRIGHT FORM ARCHITECTS. COPYING OR REPRODUCTION OR USE OF THIS DESIGN OR DRAWING IN WHOLE OR PART IS PROHIBITED WITHOUT THE WRITTEN CONSENT OF FORM ARCHITECTS KFC PORT MACQUARIE JUNCTION PACIFIC & OXLEY HIGHWAYS PORT MACQUARIE SERVICE CENTRE, NSW FINISHES SCHEDULE 3 FAF2 ISSUE SCUTTS RESTAURANT BYDATEAMENDMENT NB27.04.23INITIAL ISSUE KFC Port Macquarie FINISHES SCHEDULE -EXTERNAL CODE TYPE FINISH SPECIFICATION SUPPLIER DETAILS LOCATION NOTES SAMPLE PICTURE (FOR REFERENCE ONLY) CB T1 M G RANGE: ALIWOOD CLIP-ON SUPPLIER ALIWOOD COLOR SNOWGUM SIZE 50x50 CLIP-ON CODE 5050COS METAL CLADDING PRODUCT LYSAGHT LONGLINE 305 COLOUR: COLORBOND 'MONUMENT' (MID GREY) CODE: 305 METAL WALL SHEETING LYSAGHT WALL FINISHES: EXTERNAL 1. INSTALLED VERTICALLY. 2. TO BE APPLIED TO CFC SHEETING BEHIND TO MANUFACTURER'S INSTRUCTIONS. 3. CFC SHEETING TO BE PAINTED DULUX "BLACK" SG6G9 1. INSTALL IN ACCORDANCE WITH MANUFACTURERS INSTRUCTIONS. 1. REFER EXTERNAL ELEVATIONS 1. REFER EXTERNAL ELEVATIONS 1. REFER EXTERNAL ELEVATIONS CEMINTEL -CSR CONTACT: GAVIN BERNARDINO M.: 0418 200 281 ALIWOOD CONTACT: MARCUS WOODMAN PH: 03 5831 2574 PRODUCT CEMINTEL BARESTONE COLOUR 'ORIGINAL' FINISH FACTORY FINISH WITH CEMINSEAL SHEET SIZE 3000x1200x9mm EXPRESSED NOMINAL 20mm SHADOWLINES PAINTED DULUX "BLACK" SG6G9 PRE-FINISHED FIBRE CEMENT PANELS ALUMINIUM TIMBER LOOK CLIP-ON BATTENS PAINT POWDERCOAT FINISHES: EXTERNAL EXTERNAL PAINT FINISH: DULUX POWDERCOAT COLOUR: PRECIOUS CHARCOAL METALLIC PEARL CODE: 1. WINDOW & DOOR FRAMES 97118796 1. ALL SCREEN AREA METAL WORK INCLUDING POSTS, RAILS, LOUVERS, BATTENS, GATES ETC. 2.INSTALL IN ACCORANCE WITH MANUFACTURERS INSTRUCTIONS. 1. INSTALL IN ACCORDANCE WITH MANUFACTURERS INSTRUCTIONS. W BL TH PAINT FINISHES: EXTERNAL COLOUR DULUX KFC 'ALABASTER' -WHITE CODE: A1016 FINISH: - EXTERNAL WALL PAINT COLOUR DULUX 'TEA HOUSE' -LIGHT GREY CODE: SN4G6 FINISH: 1. NOT BEING USED FOR KFC BOX 11 V2.0, AS REFERENCE COLOUR ONLY. EXTERNAL WALL PAINT COLOUR DULUX 'BLACK CAVIAR' -BLACK CODE: SN4 H9 -Sn4 FINISH: - EXTERNAL WALL PAINT 1. REFER EXTERNAL ELEVATIONS 1. REFER EXTERNAL ELEVATIONS 1. REFER EXTERNAL ELEVATIONS DULUX WEATHERSHIELD LOW SHEEN ACRYLIC (EXTERIOR) DULUX WEATHERSHIELD LOW SHEEN ACRYLIC (EXTERIOR) DULUX WEATHERSHIELD LOW SHEEN ACRYLIC (EXTERIOR) DULUX CONTACT: ANTONIO VAZZOLER MOBILE 0412 245 783 EXTERNAL: LINE MARKING ROAD MARKING PRODUCT: COLOUR: PRODUCT: COLOUR: WATTYL WHITE TM13.10 CONCRETE WORKS EXTERNAL PAVING PRODUCT: BLACK OXIDE THROUGHOUT CONCRETE MIX COLOUR: BLACK FINISH: BROOM MISCELLANEOUS WHEEL STOPS PRODUCT: AREA SAFE RECYCLED RUBBER WHEEL STOPS CODE: 07-WSRB COLOUR: BLACK 1. CARPARK 1. COLOUR TO BE CONSISTENT THROUGHOUT CONCRETE MIX. 2. INSTALL IN ACCORDANCE WITH MANUFACTURERS INSTRUCTIONS. 1. CAR PARK & ANY OTHER AREAS REQUIRING LINE MARKING. 1. FOOTPATHS 2. RAMPS 3. DRIVE THRU-LANE 4. DELIVERY DOCK SLAB 5. KERBS & CHANNELS (GENERALLY) DULUX OR WATTYL PARCHEM (PART OF DULUX GROUP) AREA SAFE P:1300 889 821 DULUX ROADMASTER A1 ROAD MARKING ON NEW CONCRETE FLOORING PATHS (INTERIOR) DULUX WHITE AUSI1737 OR WATTYL CENTRELINE (FORMERLY ROADMARKING SB100) DULUX POWDER COATINGS 1. INSTALL IN ACCORDANCE WITH MANUFACTURERS INSTRUCTIONS. 1. INSTALL IN ACCORDANCE WITH MANUFACTURERS INSTRUCTIONS. R EXTERNAL WALL PAINT COLOUR DULUX 'RED BOX' -RED CODE: A0639 FINISH: DULUX WEATHERSHIELD LOW SHEEN ACRYLIC (EXTERIOR) EMAIL antonio.vazzoler@dulux.com.au BL-M EXTERNAL PAINT FINISH: DULUX POWDERCOAT COLOUR: ELECTRO BLACK ACE CODE: 1. REFER TO EXTERNAL ELEVATIONS 9069116F 1. INSTALL IN ACCORDANCE WITH MANUFACTURERS INSTRUCTIONS. 1. REFER EXTERNAL ELEVATIONS M1 M2 ITEM 3mm THICK PERFORATED METAL PATTERN: MATERIAL: MILD STEEL FINISH: POWDERCOAT, DURATEC X15 COLOUR: KFC RED PERFORATED METAL SCREENS ITEM 3mm THICK PERFORATED METAL PATTERN: MATERIAL: MILD STEEL FINISH: DULUX POWDERCOAT COLOUR: CHARCOAL MET PEARL (CODE: 18796) PERFORATED METAL SCREENS 1. FIXED WITHIN 20 mm FLAT BAR FRAME AS PER SUPPLIERS DETAILS WITH RED POWDERCOAT FINISH. 2. NON-PUNCHED PERIMETER BORDER TO MESH 50mm WIDE. 3. REFER MESH SCREEN DETAIL DRAWINGS FOR FURTHER INFORMATION. 1. FIXED WITHIN 20 mm FLAT BAR FRAME AS PER SUPPLIERS DETAILS WITH BLACK POWDERCOAT FINISH. 2. NON-PUNCHED PERIMETER BORDER TO MESH 50mm WIDE. 3. REFER MESH SCREEN DETAIL DRAWINGS FOR FURTHER INFORMATION. 1. EXTERNAL REFER DRAWINGS 1. EXTERNAL REFER DRAWINGS R03341 3.25mm ø 4.78mm CENTRES, 41% OPEN AREA R03341 3.25mm ø 4.78mm CENTRES, 41% OPEN AREA LOCKER GROUP CONTACT: KRISTY FENTON P: (08) 9358 9100 LOCKER GROUP CONTACT: KRISTY FENTON P: (08) 9358 9100 S3 PRODUCT SKHEME CERAMIC TILE AS SKIRTING TILE COLOUR BASALT SPECKLE CODE AWT SKH-82551 SKIRTING TILE 1.TILE TO BE CUT TO SIZE FOR SKIRTING 2.150mm HIGH SKHEME CONTACT MARILYN GUERRERA P: (02) 8755-2310 1. ENTRY PORTAL 2. EXTERNAL SKIRTING

NOTES :CONSTRUCTION

C.01 ELECTRICAL & MECHANICAL FIXTURES ARE DIAGRAMMATIC FOR SETOUT & PURPOSES.THIS DRAWING TO BE READ CONJUNCTION WITH ELECTRICAL & ENGINEERING DRAWINGS AND SPECIFICATIONS.

C.02 FINISH ALL PLASTERBOARD CEILINGS WALL/WINDOW FRAMES WITH METAL

C.03 REFER TO MECHANICAL DRAWINGS PANEL LOCATIONS. ALLOW FOR THE NUMBER SHOWN ON THE ARCHITECTURAL MECHANICAL DRAWINGS.LOCATE AND MECHANICAL DRAWINGS.

C.04REFER TO FINISHES SCHEDULE FOR FINISHES & COLOURS.

27 Sriniklesh Balachandran - Portfilio A B G H 1 C F E D 2 4 3B 3 5 6 7 1 A601 CH3110 CH2900 CH2500 CH2500 CH2500 CH2410 CH2900 CH2900 CH2500 CH2700 CH3110 CH2650 CH2700 CH2700 DL DL DL DL DL DL DL DL DL DL DL DL DL DL DL DL L6 L6 L6 EX EX EX EX DL DL EX EX EX EX DL DL DL DL EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX EX L6 L6 EX.L EX.L EX.L EX.L EX.L EX.L A013 S.24 NEW ILLUMINATED KENTUCKY FRIED CHICKEN EX.L L5 DL DL DL DL DL PT5 PT5 LA4a PT5 S.36 A015 A013 S.37 A013 S.35 CH3000 CH3000 CH3000 L5 L5 L5 LIGHTING BY COOLROOM CONTRACTOR LIGHTING BY COOLROOM CONTRACTOR DL DL DL DL DL DL DL EX.DL EX.DL EX.DL EX.DL EX.DL EX.DL EX.DL EX.DL EX.DL EX.DL EX.DL DL DL EX.DL L5 L5 DL DL EX.DL EX.DL EX.DL EX.DL EX.DL EX.DL EX.DL EX.DL EX.DL EX.DL EX.DL EX.DL EX.DL EX.DL EX.DL EX.DL EX.DL EX.DL EX.DL EX.DL EX.DL EX.DL EX.DL DL DL DL DL CH2700 CEILING HEIGHT 2700mm ABOVE DATUM LEVEL 0.00 SLAB LEVEL OF DINING ROOM KEY: GENERAL: NEW CEILING CEILING SUBSTRATE AND PAINT FINISHES BOH. REFER FINISHES SCHEDULE FOR DETAILS. ELECTRICAL: EX.RECESSED SURFACE MOUNTED LUMINAIRE EX.DOWN LIGHTS EX.PENDANT LIGHTS EX.EMERGENCY LIGHT EX.EXIT SIGNS SOUND SYSTEM MECHANICAL: XX NEW PENDANT LIGHTS NEW SPOT LIGHT FITTING TO ELECTRICAL ENGINEER'S DETAILS NEW RECESSED LUMINAIRE EX. RECESSED DOWN LIGHTS NEW RECESSED DOWN LIGHTS NEW DOWN LIGHTS L5 DL DL L6 LT03 ACCESS PANEL EX. SUPPLY AIR DIFFUSER S

C.05

C.06ALL

C.07

GENERALLY ALIGN LIGHTS. AIR CONDITIONING DIFFUSERS ETC AS INDICATED.

ACCESS PANELS MUST BE LOCKABLE KFC'S SECURITY REQUIREMENTS.

REFER TO ELECTRICAL LIGHTING PLAN FITTINGS SELECTION.

SCALE DRAWN CONTRACTOR SHOULD VERIFY ALL DIMENSIONS ON COMMENCING WORK. IF A DISCREPANCY IS FOUND FIGURED DIMENSIONS AND SCALED DIMENSIONS, CHECKED WITH THE PRINCIPAL CONSULTANT. THIS DOCUMENT IS NOT TO BE USED FOR CONSTRUCTION SIGNED AND ISSUED FOR CONSTRUCTION PRINCIPAL CONSULTANTS DETAILS Form 4 Architects Unit Trust T/A Form 4 Architects ABN: 37 992 244 025 Conrad Ramakers(AIA) Nominated Architect for N6237 V18294 Q4751 W2660 T892 S3452 CLIENT PROJECT DRAWING DRAWING NO. COPYRIGHT FORM 4 ARCHITECTS. COPYING REPRODUCTION OR USE OF THIS DESIGN OR WHOLE OR PART IS PROHIBITED WITHOUT THE CONSENT OF FORM 4 ARCHITECTS 1 50@A1 KFC PORT MACQUARIE A105 JUNCTION PACIFIC & OXLEY HIGHWAYS PORT MACQUARIE SERVICE CENTRE, REFLECTED CEILING NB 22115 FAF2 ISSUE SCUTTS RESTAURANT GROUP BYDATEAMENDMENT NB27.04.23INITIAL ISSUE KFC Port Macquarie

28 Sriniklesh Balachandran - Portfilio 04 01 03 08 06 07 05 02 FFL 0 CL 3110 S.37 A015 WL1 Ti-1 WL1 S1 G1 SC-1 SP-1 DINING AREA COUNTER 300 2810 FFL 0 CL 3110 CL - 1 2900 CB T3 CB CB SP-1 DINING AREA DINING AREA ENTRY 2810 300 EQ EQ TIMBER BATTENS 2770 2850 50210 FFL 0 CL 3110 CL - 1 2900 CB CB CB DINING AREA ENTRY AIRLOCK CL - 1 2900 S.36 A015 Ti-1 T3 COUNTER GENERAL KEY: NUMBER REFERING TO SCHEDULE REFER TO A022, A023 & A024. GX NUMBER REFERING TO GRAPHICS SCHEDULE TO SHEET NO. A016 XX S.XX A017 NUMBER REFERING TO SIGNAGE SCHEDULE SHEET NO. A017 BOH -REFER TO SHEET LAYOUT SCALE DRAWN CONTRACTOR SHOULD VERIFY ALL DIMENSIONS COMMENCING WORK. IF A DISCREPANCY IS FIGURED DIMENSIONS AND SCALED DIMENSIONS, CHECKED WITH THE PRINCIPAL CONSULTANT. THIS DOCUMENT IS NOT TO BE USED FOR CONSTRUCTION SIGNED AND ISSUED FOR CONSTRUCTION PRINCIPAL CONSULTANTS DETAILS Form 4 Architects Unit Trust T/A Form 4 Architects ABN: 37 992 244 025 Conrad Ramakers(AIA) Nominated Architect N6237 V18294 Q4751 W2660 T892 S3452 CLIENT PROJECT DRAWING DRAWING NO. AS COPYRIGHT FORM 4 ARCHITECTS. REPRODUCTION OR USE OF THIS DESIGN WHOLE OR PART IS PROHIBITED WITHOUT CONSENT OF FORM ARCHITECTS KFC PORT MACQUARIE A203 JUNCTION PACIFIC & OXLEY HIGHWAYS PORT MACQUARIE SERVICE CENTRE, ELEVATIONS-INTERNAL (FOH) SHEET -1 NB 22115 FAF2 ISSUE SCUTTS RESTAURANT GROUP SCALE 1 100@A1 KEY PLAN 1 SCALE 1 25@A1 A203 DINING ELEVATION 1 01 SCALE 1 25@A1 A203 DINING ELEVATION 2 02 SCALE - 1 : 25@A1 A203 DINING ELEVATION 3 03 SCALE 1 25@A1 A203 COUNTER WALL ELEVATION 05 BYDATEAMENDMENT NB27.04.23INITIAL ISSUE KFC Port Macquarie

29 Sriniklesh Balachandran - Portfilio 04 01 03 08 06 07 05 02 FFL 0 CL 3110 CL - 1 2900 S.37 A015 S.36 A015 PT5 WL3 LA4a WL1 T3 TB WL3 T2 S.34 A015 NEW ILLUMINATED "IT'S FINGER LICKIN' GOOD" PF7 BEYOND SC-2 COUNTER CLEANING CUPBOARD DELIVERY PICK-UP AREA AIRLOCK TIMBER FEATURE WALL 2770 TIMBER SEATING 530 TIMBER FEATURE SEATING 1170 TIMBER SEATING 500 S.38 A015 FFL 0 CL 3110 CL - 1 2900 PT5 WL3 S.38 A015 5056050 TIMBER SEATING 610 TIMBER SEATING 500 CB S1 G2 PF9 LA3 DOOR FRAME AIRLOCK D.04 G3 G4 CB PF9 LA3 LA3 PF9 DOOR FRAME DOOR FRAME AIRLOCK D.05 D.06 FFL 0 RL -1 2700 W.01 LA4a S1 R Ti-1 LA4a PF7 S1 S1 Ti-1 LA4a S1 PF7 W.02 LA4a S1 R R R M1x3 Ti-1 09 10 11 12 GENERAL KEY: NUMBER REFERING SCHEDULE REFER A022, A023 & A024. GX NUMBER REFERING GRAPHICS SCHEDULE TO SHEET NO. A016 XX S.XX A017 NUMBER REFERING SIGNAGE SCHEDULE SHEET NO. A017 BOH -REFER TO SHEET LAYOUT SCALE DRAWN CONTRACTOR SHOULD VERIFY ALL DIMENSIONS COMMENCING WORK. IF A DISCREPANCY FIGURED DIMENSIONS AND SCALED DIMENSIONS, CHECKED WITH THE PRINCIPAL CONSULTANT. THIS DOCUMENT IS NOT TO BE USED FOR CONSTRUCTION SIGNED AND ISSUED FOR CONSTRUCTION PRINCIPAL CONSULTANTS DETAILS Form 4 Architects Unit Trust T/A Form 4 ABN: 37 992 244 025 Conrad Ramakers(AIA) Nominated Architect N6237 V18294 Q4751 W2660 T892 S3452 CLIENT PROJECT DRAWING DRAWING NO. COPYRIGHT FORM ARCHITECTS. REPRODUCTION OR USE OF THIS DESIGN WHOLE OR PART IS PROHIBITED WITHOUT CONSENT OF FORM 4 ARCHITECTS KFC PORT MACQUARIE A204 JUNCTION PACIFIC & OXLEY HIGHWAYS PORT MACQUARIE SERVICE CENTRE, ELEVATIONS-INTERNAL (FOH/BOH) SHEET NB 22115 FAF2 ISSUE SCUTTS RESTAURANT GROUP SCALE 1 100@A1 KEY PLAN 1 SCALE 1 25@A1 A203 DINING ELEVATION 4 04 SCALE 1 25@A1 A203 ELEVATION 06 SCALE - 1 : 25@A1 A203 TOILET ELEVATION 1 07 SCALE - 1 25@A1 A203 TOILET ELEVATION 08 SCALE 1 25@A1 A204 D/T PAY POINT ELEVATION 1 09 SCALE 1 25@A1 A204 D/T PAY POINT ELEVATION 2 10 SCALE - 1 25@A1 A204 D/T PAY POINT ELEVATION 3 11 SCALE 1 25@A1 A204 D/T PAY POINT ELEVATION 4 12 SCALE 1 50@A1 KEY PLAN -D/T PAY POINT 2 BYDATEAMENDMENT NB27.04.23INITIAL ISSUE KFC Port Macquarie

FURNITURE SCHEDULE

TYPEQTY DESCRIPTION SUPPLIERIMAGE

B-36INTERNAL AREA LOOSE BENCH WITH BACK SIZE1400(W)x550(D)x450mm(SEAT HT.)

TYPE: PARIS BENCH WITH BACK

SEAT UPHOLSTERY FABRIC: UP1

BACK REST UPHOLSTERY FABRIC: UP2

B-41TIMBER FEATURE BENCH,

SIZE: 530(W) x610(D) x 450(H)

FINISH: TIMBER

B-51TIMBER FEATURE BENCH,

SIZE: 530(W) x610(D) x 450(H)

FINISH: TIMBER

CH124INTERNAL AREA LOOSE CHAIR

SIZE:STANDARD (HT.)

NAME: BOSTON CHAIR FINISH: WALNUT W/EPOXY COATED STEEL LEGS

CH225INTERNAL AREA LOOSE CHAIR

SIZE:STANDARD (HT.)

NAME: BOSTON CHAIR FINISH: WALNUT W/EPOXY COATED STEEL LEGS

CH36INTERNAL AREA LOOSE STOOL

size:440(W)x480(D) x750mm(SEAT HT.)

NAME:MODERN BARSTOOL FINISH: BEECH

HAVE A SEAT

BUILDER JOINER

HC2HIGH CHAIR EXISTING RELOCATED

J033BIN UNIT. REFER SHEET A609 FOR DETAILS

TA1-26FIXED TABLE

TOP FINISH: LA2

SIZE:1050x600mm

STANDARD HT:(750mm)

TA3-21INTERNAL AREA FIXED BAR HT. TABLE

TOP FINISH: LA2 IN FEATURE HERRINGBONE PATTERN

(REFER DETAILS) WITH CONTRASTING LA3 EDGINGREFER DETAILS

SIZE:2700x800mm BAR HT.(1050mm)

TABLE BASE FINISH:100x100mm SHS - PF08 FINISH (2no. SINGLE LEG SUPPORTS-REFER DETAILS)

PEDESTAL BASE: CORE DRILLED & EPOXIED INTO SLAB. BUILDER TO CONFIRM CORE SETOUT.

TA4-23FIXED TABLE TOP FINISH: LA2

SIZE:900x900mm

STANDARD HT:(750mm)

TA5-24FIXED TABLE TOP FINISH: LA2

SIZE:600x450mm

STANDARD HT:(750mm)

TA6-23FIXED TABLE TOP FINISH: LA2

SIZE:1500x600mm

STANDARD HT:(750mm)

TA7-21FIXED TABLE TOP FINISH: LA2

SIZE:2800x1000mm

STANDARD HT:(750mm)

TA8-21FIXED TABLE TOP FINISH: LA2

SIZE:2800x1000mm

STANDARD HT:(750mm)

TA9-21FIXED BAR HT. TABLE TOP FINISH: LA2

SIZE:2535x400mm

BAR HT:(1050mm)

BUILDER JOINER

30 Sriniklesh Balachandran - Portfilio A B C 4 NEW LANSCAPE EX. COL ENTRY ENTRY EX. DP EXTERNAL SEATING (COVERED) CH1 CH2 CH1 CH2 CH2 CH1 CH2 CH1 CH2 CH1 CH2 CH1 CH2 CH1 CH2 CH1 CH2 CH1 CH1 CH2 CH2 CH1 CH2 CH1 CH2 CH2 CH1 CH1 CH2 CH1 CH2 CH1 CH2 CH2 CH1 CH2 CH1 CH1 CH2 CH1 CH2 B-3 J03 J03 J03 CH1 CH2 CH1 CH2 CH1 CH2 CH1 CH2 CH3 B-3 B-3 B-3 B-3 B-3 CH3 CH3 CH3 CH3 CH3 DINING AREA DELIVERY PICKUP CUSTOMER QUEUING SELF-ORDER KIOSK TIMBER BATTENS ON THE CEILING PROPOSED SEATS 6+ EX. SEATS 46 SP-1 SC-1 SC-2 950 1500 ORS SERVERY COUNTER 2055 1200 1200 ℄℄ ℄ 5.10 HC HC TA3-2 TA7-2 TA4-2 TA5-2 TA1-2 TA4-2 TA4-2 TA5-2 TA6-2 TA6-2 TA6-2 TA1-2 TA5-2 TA8-2 TA1-2 TA1-2 TA9-2 TA1-2 TA1-2 TA5-2 B-4 B-5 C.01 SHOP FITTER TO CONFIRM TIME FRAMES AND ORDER ACCORDINGLY, ESTIMATED TIME ON FURNITURE SUPPLIED PTY LTD. C.02 BUILDER TO CONFIRM CORE PRIOR TO INSTALLATION. NOTES :CONSTRUCTION SCALE DRAWN CONTRACTOR SHOULD VERIFY ALL DIMENSIONS COMMENCING WORK. IF A DISCREPANCY FIGURED DIMENSIONS AND SCALED DIMENSIONS, CHECKED WITH THE PRINCIPAL THIS DOCUMENT IS NOT TO BE USED FOR SIGNED AND ISSUED FOR CONSTRUCTION PRINCIPAL CONSULTANTS DETAILS Form 4 Architects Unit Trust T/A Form 4 ABN: 37 992 244 025 Conrad Ramakers(AIA) Nominated Architect N6237 V18294 Q4751 W2660 T892 S3452 CLIENT PROJECT DRAWING DRAWING NO. COPYRIGHT FORM 4 ARCHITECTS. REPRODUCTION OR USE OF THIS DESIGN WHOLE OR PART IS PROHIBITED WITHOUT CONSENT OF FORM 4 ARCHITECTS KFC PORT MACQUARIE A600 JUNCTION PACIFIC & OXLEY HIGHWAYS PORT MACQUARIE SERVICE CENTRE, FOH -FURNITURE NB 22115 FAF2 ISSUE SCUTTS RESTAURANT GROUP BYDATEAMENDMENT NB27.04.23INITIAL ISSUE

KFC Port Macquarie