3 Controllers configuration:
Seven faders control "kwinty" patcher. Six of them control volume of sine tone generators. 7th fader is a masterfader for audio sum of all 6 sine signals. Encoders control speed of loops circle motion. Each encoder is ascribed to one loop. First 7 lops should have slower tempo of circulation (from very slow to a little bit faster) and 2 other loops should have faster tempo of circulation. Encoders can be programmed before performance and/or can be moved in a real time. 5 audio clips have to be played according to their places in score. Volume level of all the tracks should be regulated according to action in the piece. From bar 70 overall volume should rise consecutively by smoothly coming up and down till maksimum level in bar 89. After bar 91 as follows: gradually turn down audio clips while at the same starting improvisation by gradually turning up volume of all pure tones in "kwinty" patcher from zero level. The only audio clip which should not be turn off completely is a clip number 5 and it should last till the bar 96. Beginning with a bar 96 reverb's fader has to be in its maximum. After the end of flute part all the pure tones and audio clip 5 have to be gradually turned down until silence and at the end smoothly mute reverb's fader. Performer of electronic part should follow this instructions and cooperate with flutist.