Hydraulic Manifold 28
18
9
22
16
15
2
10
14
29
27 25 6 5
12 20 6 19
20
13 18
19 26
5 17
24 7
11
18 8
17
18
7
17
17 23
18
1
Hydraulic System
3
RIGHT FRONT
21 4
Figure 49 1. 2. 3. 4. 5. 6. 7. 8. 9. 10.
Hose clamp Micro switch Barb fitting Flange head screw Straight hydraulic fitting Straight hydraulic fitting 90o hydraulic fitting 45o hydraulic fitting Straight hydraulic fitting Barb fitting
11. 12. 13. 14. 15. 16. 17. 18. 19. 20.
Hydraulic tube O−ring Hose Hydraulic hose Hydraulic hose Hydraulic hose Hydraulic hose Hydraulic hose Hose
2. If hydraulic fittings are to be removed from manifold, mark fitting orientation to allow correct assembly.
Removal NOTE: The ports on the manifold are marked for easy identification of components. Example: R1 is the reel circuit relief valve and P1 is the gear pump connection port (See Hydraulic Schematics to identify the function of the hydraulic lines and cartridge valves at each port location). 1. Remove hydraulic manifold from the machine using Figure 49 as guide. Reelmaster 3100−D
21. 22. 23. 24. 25. 26. 27. 28. 29.
Hydraulic manifold Hydraulic hose Hydraulic hose Hose clamp Spacer Philips pan head screw O−ring O−ring O−ring O−ring
Installation 1. If hydraulic fittings were removed, install fittings to manifold using marks made during the removal process to properly orientate fittings. 2. Install hydraulic manifold to the frame using Figure 49 as guide.
Page 4 − 77
Rev. D
Hydraulic System (Rev. C)