7. Connect the tie rod end to the spindle bracket with one (1) nut. Tighten the nut to a torque of 25 - 33 ft-lb. Install the jam nut and tighten against the other nut to secure tie rod end.
8. Install the lock nut and cap screw to secure the steering cylinder rod end to the steering pivot. Tighten the nut to 130 to 150 ft-lb. 9. Lubricate the bushings through the grease fitting on the steering pivot.
Figure 16
Groundsmaster速 300 Series
Page 8 - 13
Repairs