Process Fans In Manufacturing Of Coke

Process Fans In Manufacturing Of Coke

Neel Rao Writes on Reitz India primary air fans & Reitz India Industrial centrifugal fans technologies.

In melting iron ore, coke finds its use as fuel and also a reducing agent. Coke is grey, porous and hard, and contains a few impurities along with high carbon content. Coke is produced when coal is baked, and it turns into carbon. The impurities in it burn off, leaving behind the high carbon coal. Burning coke produces little smoke, but the heat produced here is immense. Therefore, coke is used in smelting steel and iron.

The manufacturing process of coke involves the extensive use of industrial fans.

Two processes are involved in the manufacturing of coke. These are the by-product process and the heat recovery process

By Product Process: In this process, coal is carbonated without the presence of air in coking chambers by indirect heating. The impurities are to be baked at a high temperature, often ranging between 1000 to 2000 degrees Celsius. Volatile materials escape from the coal mass as gases during this process when the required temperature is attained. These gases are piped to a by-product plant where they are cooled down in several steps to extract the by-products.

Heat Recovery Process: The heat recovery process involves combusting volatile matter which leads to heat generation. Through conduction and radiation, this heat gets across to the mass of coal. The heat of the flue gases is used for the production of steam and generation of power. In this process, only coke is obtained from the ovens and no by-products are recovered.

How Do Process Fans Help In Manufacturing Coke?

Primarily, three types of industrial fans are used in the manufacturing of coke. These include combustion fans, exhaust fans and cooling fans.

Combustion Fans Industrial process fans are used in the coke oven plants as combustion fans. This ensures that the air is combusted, in burning the coal. Combustion in the coke oven releases hot air which bakes the coal in the oven. The combustion process gets a boost when these fans are used.

Exhaust Fans Industrial process fans are used in the coking oven to eliminate the gases. Exhaust fans are used in removing the evolved gases that are used to form by-products or used in steam production and generation of power. These exhaust fans ease up the process of making coke.

Cooling Fans In the final stage of producing coke, cooling fans are used to eliminate the heat generated as a result of compression from the gas oven of coke. The efficiency of many by-product production processes is significantly improved at a lower temperature. Failure to use the right cooling equipment can mess up the efficiency of the production process. Besides, certain processes like the removal of water wash ammonia take place at lower temperatures. Unless the materials are cooled down, proper functioning will not take place. Therefore, cooling fans are used to reduce the temperature of the coke oven gas, connecting it directly with a cooling medium. In manufacturing plants, either wash oil or water is used as the cooling medium.

As can be seen above, the process of making coke involves a lot of heat and very hot gases. The product process requires the right equipment for the efficient and smooth production of coke. In the coke manufacturing process, industrial process fans find several applications at various stages of the process.

About REITZINDIA Reitz India has set a benchmark to deliver high quality fans for heavy duty industries which can work at precise operating conditions like high temperatures and pressures.

Reitz offer idealistic Centrifugal Fan and Centrifugal blower design that can be used in all large scale process industries like cement, iron & steel, power plants, fertilizers/ chemicals and more.

Thank you for spending your precious time in reading this article!