Let’s build the
Jenny Side Table 0
MINU
60
SEMBL
Y
A
S
TE
6
SKU 34504
Scan me! Inspiration Digital Instructions Free Lifetime Warranty 24-0102-VN
Ok, let’s get rolling
What’s included Description
Qty
A
Top Panel
1
B
Bottom Panel
1
C
Shelf Panel
1
Estimated time for assembly
D
Left Side Panel
1
60:00
E
Left Side Panel
1
F
Right Side Panel
1
G
Right Side Panel
1
This should be easy, just follow our instructions and you will be back to Netflix in no time.
What you need •
Some of your favourite bubbly or your preferred relaxant
H
Back Panel
1
•
Use the packaging carton as a working surface to prevent product damage during assembly
J
Drawer Bottom Panel
1
•
Phillips head screwdriver
L
Drawer Back Panel
1
•
Drill with 1/4” and/or 5/16” drill bits
M
Drawer Front Panel
1
N
Left Drawer Side Panel
1
O
Right Side Drawer Panel
1
P
Metal Frame
2
Weight Limitation
90 11 lbs top
lbs drawer
24
lbs shelf
Toll-free at 1-866-619-1004 Help@nathanjames.com Nathanjames.com/help
Scan me! Inspiration Digital Instructions Free Lifetime Warranty
2
The goods
A
D
B
E
J
C
F
G
L
M
H
N
P
IMPORTANT 1. Do not tighten bolts / screws completely until all bolts / screws are lined up and inserted into holes. 2. Do not over tighten screws and bolts to avoid stripping. 3. Please use hand tools to assemble this product. Do not use power tools. 3
O
What’s included Description
Qty
1
M6*15 mm Bolt
4
2
Cam Bolt
8
3
Cam Lock
8
4
Wooden Dowel
16
5
Handle
1
6
M4.2*40 mm Screw
8
7
M4*23 mm Bolt
2
8
M3.5*12 mm Screw
12
9
M4.2*32 mm Screw for Non-drywall Anchor
2
10
M4.2*50 mm Screw for Drywall Anchor
2
11
Non-drywall Anchor
2
12
Drywall Anchor
2
13
Plastic Pad
4
14
Allen Key
1
15
Drawer Runner Set
1
4
The goods
1
2
8
9
left drawer runner
3
10
4
5
11
12
right drawer runner
left cabinet rail
15
5
6
7
13
14
right cabinet rail
Step 1 Let’s get this thing fired up! We’ll start with the Cam Bolts (2) and Wooden Dowels (4). Insert the Wooden Dowels (4) into the sides of the Left Side Panels (D)(E) and Right Side Panels (F)(G). Screw the Cam Bolts (2) into the Top Panel (A) and Drawer Front Panel (M). 4
2 4
2
D
4
4 4
2 4
2
E
A
2
4
4
2
4 F
4 4 4
2
2 M
4 4 G
4
4
Step 2
D
Now let’s put those pieces together! Align the Left Side Panels (D)(E) and the Right Side Panels (F)(G) on top of the Top Panel (A). The Cam Bolts you inserted in the last step should align with the holes in the side panels. Use Cam Locks (3) to secure the panels in place.
E
3 3
3 3
F G
See following page for Cam Lock Assembly Quick Guide.
6
A
How to use cam locks
Did you know? Cam locks are used to join two panels together, usually the edge of one to the flat side of another.
First, your cam bolt (or cam pin) will need to be properly inserted into the flat side of the board. Important Note: Only tighten the cam bolt until it is secure. Do not over-tighten.
Next, you will fit the proper hole on the edge of the associated joining panel over the cam bolt. Important Note: When installed properly, the head of the cam bolt will be visible through the larger hole on the side of the joining panel.
Next, you will notice the cam lock has a “C” shaped back. Commonly, an arrow on the front of the cam lock points in the same direction as the open section on back. Using these as your cue, insert the cam lock into the large hole so the opening of the “C” fits over the head of the cam bolt.
Using a screwdriver, you will turn the cam lock until it stops, usually between 130º or 180º. You will feel the panels pulling closer until they are secured. Important Note: Only turn the cam lock until the panels are fully engaged & feel secure. Turning too far may lead to hardware failure.
Still having issues?
If a cam lock seems to be spinning in place or is not “catching” or pulling the p anels together as expected first remove the cam lock & try again while making sure that everything is properly positoned & oriented .
,
If you are still having issues get ting things work ing as expected, first remove the cam lock then unscrew the cam bolt slightly (less than 1 complete turn) to see if that helps with the alignment of the cam lock & bolt .
7
Step 3 Now it’s time to assemble the Cabinet Rails (15). We’ll be using the rails labeled CL and CR. Attach the CL rail using M3.5*12 mm Screws (8). Be sure that the wheel of the rail is facing the front of the cabinet. Repeat this process for the CR rail, again ensuring the wheel of the rail is facing the front of the cabinet.
Front
Back
CL
15
8
8 8
H
Next, slide the Back Panel (H) into the groove in the back of the cabinet.
Back
8
8 8 Front
Back
CR
15
8
Front
6
Step 4
6
Attach the Bottom Panel (B) to the cabinet you built in the previous steps with M4.2*40 mm Screws (6).
6 6
B
6
Step 5
6
You’re doing great! Now it’s time to start on the drawer. Attach the Left Drawer Side Panel (N) and the Right Drawer Side Panel (O) to the Drawer Back Panel (L) using M4.2*40 mm Screws (6).
6 6
O L
N
9
Step 6 Slide the Drawer Bottom Panel (J) into the drawer base you created in the last step.
J
Step 7 Time to finish up this drawer. Attach the Handle (5) to the Drawer Front Panel (M) with M4*23 mm Bolts (7). Next, attach the Drawer Front Panel (M) and lock into place with Cam Locks (3).
3 3
7
3
7
M 3
10
5
Step 8 Time to attach the Drawer Runners (15). We’ll be attaching the runners labeled DL and DR. Attach DL underneath the drawer on the left side with M3.5*12 mm Screws (8). Be sure the wheel of the rail is facing the back of the drawer. Repeat this process with the right side rail labeled DR.
8
8
8 8 8 8 8
8 Left drawer runner
15
Step 9 You’re almost done! Now would be a good time to order a pizza to enjoy with your new side table. Attach the Metal Frames (P) to the bottom of the Bottom Panel (B) and Shelf Panel (C) with M6*15 mm Bolts (1). Use the Allen Key (14) to tighten bolts.
Right drawer runner
Drawer runner x1set
1 1 P B
P
C
1 1
11
Step 10 Slide the completed drawer into the cabinet.
Cabinet Slide Drawer Slide
Step 11
13
Attach Plastic Pads (13) to each corner of the back of the drawer.
13
12
Step 12 You made it to the last step! We’re so proud of you. Time to attach this baby to the wall! We’ll be using screws and anchors to secure it. See the following pages for detailed instructions on how to do this.
12
10 11
12
11 9
11
12
9
10
9 10 Please note… Parts 9 & 11 are for non-drywall applications. Parts 10 & 12 are for drywall applications. See following pages for more detailed instructions.
13
Step 12 (cont.) Non-drywall application Mark it Chose your desired location on the wall, have your friend hold the table in place and use a pencil to mark where the anchors will go.
1/4” Drill bit Move the table to the side and following the marks you just made, with a 1/4” drill bit, drill 2 holes into the wall.
Insert the anchors Go ahead and tap the wall anchors into place in the new holes that you just drilled. If you’re feeling strong, just go ahead and push it in.
11
11
All about the angle
9
Insert 1 screw through each metal bracket and into the wall anchor. Tilt your phillips head screwdriver, and secure but do not over tighten.
14
Step 12 (cont.) Drywall application Mark it Chose your desired location on the wall, have your friend hold the table in place and use a pencil to mark where the anchors will go.
5/16” Drill bit Move the table to the side and following the marks you just made, with a 5/16” drill bit, drill 2 holes into the wall.
Insert the anchors Go ahead and tap the wall anchors into place in the new holes that you just drilled. If you’re feeling strong, just go ahead and push it in.
12
12
All about the angle
10
Insert 1 screw through each metal bracket and into the wall anchor. Tilt your phillips head screwdriver, and secure but do not over tighten.
15
Step 12 (cont.) How to use drywall anchors
1. Drill hole with 5/16” bit
3. Begin tightening
2. Pinch and insert
4. Tighten to 100%
16
No heartburn, when we handle the return Give us a call 1-866-619-1004 or shoot us a message at help@nathanjames.com we will issue you a free replacement with zero hassle.
Our way
Their way
Give us a call
Re-package item
Replacement
Schedule pick up
You
Track package Replacement You
We really don’t want you to go through the hassle of re-packaging your item and sending it back, because let’s be honest…nobody has time for that.
17
Safety first, fun later We want your Jenny Side Table to last as long as possible, so we recommend that you tighten the screws 2 weeks after assembly and for added safety check the tightness of all screws every 2 months. For proper care and treatment of fabric & metal please check our website at NathanJames.com/products
Safe use of this product starts with you.
Do not modify the structure of this product in any way.
Use this side table responsibly with the primary concern for your safety. Follow assembly instructions carefully and inspect product upon receipt and each use.
Our products have been tested to meet specific safety measures as they were originally intended to be sold. Any modifications will present the risk of creating significant safety issues which NJ will not be responsible for.
Nathan James and its parent companies cannot be held legally responsible for any injuries or death resulted from failure to follow instructions or improper use of this product.
Proper use
DO NOT
use for commercial purposes
DO NOT
place on uneven floor or surface
DO NOT
use as a step stool or stand on table
DO NOT
leave spilled liquid on table top
DO NOT
put hot serving liquid directly on table top
DO NOT
use table if damaged or broken
DO NOT
make temporary repairs
DO NOT
use outdoors
18
We are only in business if you’re happy For starters, thanks for being you. Toll-free at 1-866-619-1004 Help@nathanjames.com NathanJames.com/help
We do our best to ensure your furniture arrives without any problems, but occasionally mistakes happen—as humans we are imperfect beings. In the event that a part is damaged or missing, we will be more than happy to provide you with replacement part(s) for free.
Warranty This product comes with a lifetime warranty from the date of purchase. Please use your phone to scan the QR code to register your product or visit https://goo.gl/i9dk3q
Did we do alright? Please spread the love! If you are happy with your product, tell your friends and family about us or even better leave us a review online. Spreading the word gives us the opportunity to make more people happy and keep our prices low for your next purchase.
Brooklyn Burdon Founder, Nathan James
19