Catalogue of wooden windows and door NAGODE

windows doors okna in and vrata

NAGODE www.nagode.si Top quality manufacturing from Slovenia

okna in vrata

NAGODE www.nagode.si okna in vrata

NAGODE www.nagode.si

CATALOGUE OF

WOODEN WINDOWS AND DOORS www.nagode.si 1

Windows and doors Nagode

WINDOWS • new buildings • adaptations • renovations of heritage-listed construction works

DOORS • entrance doors • garage doors – double and lifting doors

Slovenian product competitiveness energy savings reliability quality

Windows and doors for your home 2

WOODEN WINDOWS

3

NAGODE classic

68

DESCRIPTION OF THE WINDOW AND ITS ADVANTAGES

Thermal transmittance for spruce windows in accordance with the standard SIST EN 14351-1 Glass

The thickness of the window frame is 68mm, the profiles are glued from three layers of unjointed wood, which provides optimum strength and stability of the product.

[W/m2K]

4/16/4 Ug = 1,1

4/16/4 Ug = 1,0

VIEW FROM THE INSIDE HARDWARE The quality German GU hardware enables all possible ways of opening.

The possibility to choose safety or concealed hardware. Standard installation of the micro-ventilation element.

GLASS It is possible to install double or triple panes of glass with thermal insulation Ug from 2.9 to 0.80 W/m2K.

GLASS SPACERS You can choose between the aluminium, PVC or rubber implementation of the Super Spacer.

GLAZING The installed glass is lined with wooden shims to increase the constructional strength of the sash.

It is fixed on the internal and external sides with silicone, which is trimmed after application.

GLAZING BARS

Uw

[W/mK]

[W/m2K]

ALU

1,31

TGI

1,24

Super Spacer

1,21

ALU

1,25

TGI

1,18

Super Spacer

1,15

ALU

1,18

TGI

1,11

Super Spacer

1,08

ROUNDED EDGES Soft rounded edges on the frame and sash provide an elegant look. They enable a uniform and quality application of the end coating.

SURFACE TREATMENT Three- or four-system surface protection of the wood with environmentally friendly water-based coatings. The possibility to choose two-coloured paintwork; a different colour on the outside and on the inside.

WOOD The window profile is 68 mm thick, made from three layers of wood glued together. Our own manufacture assures selected and quality wood. Manufactured exclusively from longitudinally unjointed wood.

SASH DRIP PROFILE It is installed as standard at the lower part of the sash to extend the durability of the window.

FRAMEWORK DRIP PROFILE

We perform installations of concealed glazing bars.

It protects the most exposed parts of the window from the weather. Designed with a thermal element.

SEAL

PROTECTION OF THE V-JOINTS

Two permanent elastic Q-Lon weatherstrips are integrated into the window as standard.

4

4/12/4 Kr Ug = 0,9

Spacer

Before applying a thick layer of end coating, all the V-joints are additionally protected by a special elastic sealant for protection against the ingress of moisture.

VIEW FROM THE OUTSIDE

68 NAGODE rustic 68 DESCRIPTION OF THE WINDOW AND ITS ADVANTAGES

Thermal transmittance for spruce windows in accordance with the standard SIST EN 14351-1 Glass

[W/m2K]

4/16/4 Ug = 1,1

4/16/4 Ug = 1,0

4/12/4 Kr Ug = 0,9

Spacer

Uw

[W/mK]

[W/m2K]

ALU

1,31

TGI

1,24

Super Spacer

1,21

ALU

1,25

TGI

1,18

Super Spacer

1,15

ALU

1,18

TGI

1,11

Super Spacer

1,08

The wooden window with its rounded edges in a special style is a product which can be adapted to the internal and external architecture due to its unique design.

Rustic is a window which has an emphasized baroque style profile instead of the rounded edges. It is suitable for protected buildings.

VIEW FROM THE INSIDE

ROUNDED EDGES

HARDWARE

The stylish rounded edges of the frame and sash provide a rustic look.

The quality German GU hardware enables all possible ways of opening.

The possibility to choose safety or concealed hardware.

Standard installation of the microventilation element.

SURFACE TREATMENT

GLASS

Three- or four-system surface protection of the wood with environmentally friendly water-based coatings. The possibility to choose two-coloured paintwork; a different colour on the outside and on the inside.

It is possible to install double panes of glass with thermal insulation Ug from 2.9 to 0,90 W/m2K.

GLASS SPACERS SYou can choose between the aluminium, PVC or rubber implementation of the Super Spacer.

WOOD The window profile is 68mm thick, made from three layers of wood glued together. Our own manufacture assures selected and quality wood. Manufactured exclusively from longitudinally unjointed wood.

GLAZING The installed glass is lined with wooden shims to increase the constructional strength of the sash. It is fixed on the internal and external sides with silicone, which is trimmed after application.

SASH DRIP PROFILE The window is installed as standard without a sash drip profile. It can be installed upon request.

WOODEN DRIP EDGE

GLAZING BARS

The wooden drip bar emphasizes the rustic look of the window. It is attached to the aluminium drip profile with a thermal element.

We also provide installations of stylish concealed glazing bars.

PROTECTION OF THE V-JOINTS

SEAL

Before applying a thick layer end coating, all the V-joints are additionally protected by a special elastic sealant for protection against the ingress of moisture.

Two permanent elastic Q-Lon weatherstrips are integrated into the window as standard.

VIEW FROM THE OUTSIDE

5

NAGODE superior

78

DESCRIPTION OF THE WINDOW AND ITS ADVANTAGES

Thermal transmittance for spruce windows in accordance with the standard SIST EN 14351-1 Glass

Spacer

[W/m2K]

The window is manufactured from a 78mm thick profile, made from four layers of longitudinally unjointed wood and glued together. It is distinguished by its good thermal insulation and structural stability.

4/12/4/12/4 Ug = 0,70

4/16/4/16/4 Ug = 0,60

4/18/4/18/4 Ug = 0,50

VIEW FROM THE INSIDE HARDWARE

[W/m2K]

ALU

1,00

TGI

0,93

Super Spacer

0,90

ALU

0,93

TGI

0,86

Super Spacer

0,83

ALU

0,86

TGI

0,80

Super Spacer

0,76

ROUNDED EDGES

The quality German GU hardware enables all possible ways of opening.

The possibility to choose safety or concealed hardware. Standard installation of the micro-ventilation element.

Soft rounded edges on the frame and sash provide an elegant look. They enable a uniform and quality application of the end coating.

SURFACE TREATMENT

GLASS

Three- or four-system surface protection of the wood with environmentally friendly water-based coatings. The possibility to choose two-coloured paintwork; a different colour on the outside and on the inside.

It is possible to install triple panes of glass with the thermal insulation Ug from 0.7 to 0.50 W/m2K.

GLASS SPACERS You can choose between the aluminium, PVC or rubber implementation of the Super Spacer.

WOOD The window profile is 78 mm thick, made from three layers of wood glued together. Our own manufacture assures selected and quality wood. Manufactured exclusively from longitudinally unjointed wood.

GLAZING The installed glass is lined with wooden shims to increase the constructional strength of the sash.

It is fixed on the internal and external sides with silicone, which is trimmed after application.

SASH DRIP PROFILE It is installed as standard at the lower part of the sash to extend the durability of the window.

FRAMEWORK DRIP PROFILE

GLAZING BARS

It protects the most exposed parts of the window from the weather.

We perform installations of concealed glazing bars.

6

Uw

[W/mK]

SEAL

PROTECTION OF THE V-JOINTS

The window is equipped as standard with three permanent elastic Q-Lon seals. It is possible to add a fourth seal.

Before applying a thick layer of end coating, all the V-joints are additionally protected by a special elastic sealant for protection against the ingress of moisture.

VIEW FROM THE OUTSIDE

90 NAGODE energy saving 90 DESCRIPTION OF THE WINDOW AND ITS ADVANTAGES

Thermal transmittance for spruce windows in accordance with the standard SIST EN 14351-1 Glass

[W/m2K]

4/12/4/12/4 Ug = 0,70

4/16/4/16/4 Ug = 0,60

4/18/4/18/4 Ug = 0,50

Spacer

Uw

[W/mK]

[W/m2K]

ALU

0,97

TGI

0,90

Super Spacer

0,87

ALU

0,90

TGI

0,83

Super Spacer

0,80

ALU

0,83

TGI

0,76

Super Spacer

0,73

The window has exceptional properties – it is energy saving and its 90mm thick window frame enables excellent structural stability and high thermal insulation.

VIEW FROM THE INSIDE HARDWARE

ROUNDED EDGES

The quality German GU hardware enables all possible ways of opening.

The possibility to choose safety or concealed hardware. Standard installation of the micro-ventilation element.

Soft rounded edges on the frame and sash provide an elegant look. They enable a uniform and quality application of the end coating.

SURFACE TREATMENT

GLASS

Three- or four-system surface protection of the wood with environmentally friendly water-based coatings. The possibility to choose two-coloured paintwork; a different colour on the outside and on the inside.

It is possible to install triple panes of glass with the thermal insulation Ug from 0.7 to 0.50 W/m2K.

GLASS SPACERS You can choose between the aluminium, PVC or rubber implementation of the Super Spacer.

WOOD The window profile is 90 mm thick, made from three layers of wood glued together. Our own manufacture assures selected and quality wood. Manufactured exclusively from longitudinally unjointed wood.

GLAZING The installed glass is lined with wooden shims to increase the constructional strength of the sash.

It is fixed on the internal and external sides with silicone, which is trimmed after application.

SASH DRIP PROFILE It is installed as standard at the lower part of the sash to extend the durability of the window.

FRAMEWORK DRIP PROFILE

GLAZING BARS

It protects the most exposed parts of the window from the weather.

We perform installations of concealed glazing bars.

PROTECTION OF THE V-JOINTS

SEAL

Before applying a thick layer of end coating, all the V-joints are additionally protected by a special elastic sealant for protection against the ingress of moisture.

The window is equipped as standard with three permanent elastic Q-Lon seals. It is possible to add a fourth seal.

VIEW FROM THE OUTSIDE

7

NAGODE energy saving

102

DESCRIPTION OF THE WINDOW AND ITS ADVANTAGES

Thermal transmittance for spruce windows in accordance with the standard SIST EN 14351-1 Glass

Spacer

[W/m2K]

Energy-saving window – the 102mm thick window frame provides excellent structural stability and high thermal insulation.

4/12/4/12/4 Ug = 0,70

4/16/4/16/4 Ug = 0,60

4/18/4/18/4 Ug = 0,50

VIEW FROM THE INSIDE HARDWARE

[W/m2K]

ALU

0,94

TGI

0,87

Super Spacer

0,84

ALU

0,88

TGI

0,81

Super Spacer

0,78

ALU

0,81

TGI

0,74

Super Spacer

0,71

ROUNDED EDGES

The quality German GU hardware enables all possible ways of opening.

The possibility to choose safety or concealed hardware. Standard installation of the micro-ventilation element.

Soft rounded edges on the frame and sash provide an elegant look. They enable a uniform and quality application of the end coating.

SURFACE TREATMENT

GLASS

Three- or four-system surface protection of the wood with environmentally friendly water-based coatings. The possibility to choose two-coloured paintwork; a different colour on the outside and on the inside.

It is possible to install triple panes of glass with the thermal insulation Ug from 0.7 to 0.50 W/m2K.

GLASS SPACERS You can choose between the aluminium, PVC or rubber implementation of the Super Spacer.

WOOD The window profile is 102 mm thick, made from three layers of wood glued together. Our own manufacture assures selected and quality wood. Manufactured exclusively from longitudinally unjointed wood.

GLAZING The installed glass is lined with wooden shims to increase the constructional strength of the sash.

It is fixed on the internal and external sides with silicone, which is trimmed after application.

SASH DRIP PROFILE It is installed as standard at the lower part of the sash to extend the durability of the window.

FRAMEWORK DRIP PROFILE

GLAZING BARS

It protects the most exposed parts of the window from the weather.

We perform installations of concealed glazing bars.

8

Uw

[W/mK]

SEAL

PROTECTION OF THE V-JOINTS

The window is equipped as standard with three permanent elastic Q-Lon seals. It is possible to add a fourth seal.

Before applying a thick layer of end coating, all the V-joints are additionally protected by a special elastic sealant for protection against the ingress of moisture.

VIEW FROM THE OUTSIDE

110 NAGODE energy saving 110 DESCRIPTION OF THE WINDOW AND ITS ADVANTAGES

Thermal transmittance for spruce windows in accordance with the standard SIST EN 14351-1 Glass

[W/m2K]

4/12/4/12/4 Ug = 0,70

4/16/4/16/4 Ug = 0,60

4/18/4/18/4 Ug = 0,50

Spacer

Uw

[W/mK]

[W/m2K]

ALU

0,93

TGI

0,86

Super Spacer

0,83

ALU

0,87

TGI

0,80

Super Spacer

0,77

ALU

0,80

TGI

0,73

Super Spacer

0,70

The window with the 110mm thick window frame is suitable for installation into low-energy facilities, since it boasts structural stability and insulation.

VIEW FROM THE INSIDE HARDWARE

ROUNDED EDGES

The quality German GU hardware enables all possible ways of opening.

The possibility to choose safety or concealed hardware. Standard installation of the micro-ventilation element.

Soft rounded edges on the frame and sash provide an elegant look. They enable a uniform and quality application of the end coating.

SURFACE TREATMENT

GLASS

Three- or four-system surface protection of the wood with environmentally friendly water-based coatings. The possibility to choose two-coloured paintwork; a different colour on the outside and on the inside.

It is possible to install triple panes of glass with the thermal insulation Ug from 0.7 to 0.50 W/m2K.

GLASS SPACERS You can choose between the aluminium, PVC or rubber implementation of the Super Spacer.

WOOD The window profile is 110 mm thick, made from three layers of wood glued together. Our own manufacture assures selected and quality wood. Manufactured exclusively from longitudinally unjointed wood.

GLAZING The installed glass is lined with wooden shims to increase the constructional strength of the sash.

It is fixed on the internal and external sides with silicone, which is trimmed after application.

SASH DRIP PROFILE It is installed as standard at the lower part of the sash to extend the durability of the window.

FRAMEWORK DRIP PROFILE

GLAZING BARS

It protects the most exposed parts of the window from the weather.

We perform installations of concealed glazing bars.

PROTECTION OF THE V-JOINTS

SEAL

Before applying a thick layer of end coating, all the V-joints are additionally protected by a special elastic sealant for protection against the ingress of moisture.

The window is equipped as standard with three permanent elastic Q-Lon seals. It is possible to add a fourth seal.

VIEW FROM THE OUTSIDE

9

thermally modified wood NAGODE pro The window is made from termally modified wood.

The procedure is unique and high tech and provides precise control of the reactions that take place in the wood during the modification process.

The technology enables time effective modification of most types of coniferous and deciduous wood according to predefined programmes. Due to innovative solutions the smell of modified wood (the smell of charcoal) is significantly less pronounced, and all the resin is removed from the wood. Besides solid wood, we can also modify the veneer.

Changes in the structure of the wood macromolecules in the process of termal modification are a result of spontaneous thermochemical reactions which take place during the heating of the wood at temperatures between 170 °C in 230 °C C without the addition of other substances or chemical reagents. This way the “operation” (expansion and contraction) of the wood is reduced by 50% and the durability is enhanced.

The resistance of low-resistance coniferous wood improves to class 2 (standard SIST EN 350-2), where naturally resistant oak and similar wood can be found.

Termally modified wood can be used outdoors without additional protection.

CHARACTERISTICS OF HEAT-TREATED WOOD:

(compared to natural, untreated wood)

• improved dimensional stability of the wood (up to 50% reduced expansion and contraction of the wood) • improved natural resistance to pests • reduced balanced moisture content of the wood • uniform colour throughout the entire cross section • 100 % people and environment friendly

TESTED AT THE BIOTECHNICAL FACULTY, UNIVERSITY OF LJUBLJANA

• exotic looking wood • longer lifespan even when using outdoors

10

SPRUCE

LARCH

OAK

WOODEN WINDOW 68 NAGODE pro 68 Thermal transmittance for spruce windows in accordance with the standard SIST EN 14351-1 Uw

Glass

Spacer [W/mK]

[W/m2K]

Profil 68 4/16/4 Ug = 1,0

ALU

1,19

TGI

1,12

Profil 78 4/12/4/12/4 Ug = 0,70

ALU

0,95

TGI

0,88

Profil 90 4/12/4/12/4 Ug = 0,70

ALU

0,92

TGI

0,85

Profil 102 4/16/4/16/4 Ug = 0,60

ALU

0,82

TGI

0,75

Profil 110 4/18/4/18/4 Ug = 0,50

ALU

0,74

TGI

0,67

[W/m2K]

DESCRIPTION OF THE WINDOW AND ITS ADVANTAGES

NAGODE pro is made of thermally

modified wood. It is completely natural window that does not require any additional protection.

VIEW FROM THE INSIDE

IMPLEMENTATION IN ALL THICKNESSES:

ROUNDED EDGES

68

78

90

102

110

HARDWARE

Soft rounded edges on the frame and sash provide an elegant look. They enable a uniform and quality application of the end coating.

The quality German GU hardware enables all possible ways of opening.

The possibility to choose safety or concealed hardware. Standard installation of the micro-ventilation element.

SURFACE TREATMENT Three- or four-system surface protection of the wood with environmentally friendly water-based coatings.

GLASS It is possible to install double or triple panes of glass with thermal insulation Ug from 2.9 to 0.80 W/m2K.

GLASS SPACERS You can choose between the aluminium, PVC or rubber implementation of the Super Spacer.

WOOD

The window profile is 68 mm thick, made from three layers of wood glued together. Our own manufacture assures selected and quality wood. Manufactured exclusively from longitudinally unjointed wood.

GLAZING The installed glass is lined with wooden shims to increase the constructional strength of the sash.

It is fixed on the internal and external sides with silicone, which is trimmed after application.

SASH DRIP PROFILE It is installed as standard at the lower part of the sash to extend the durability of the window.

FRAMEWORK DRIP PROFILE

GLAZING BARS

It protects the most exposed parts of the window from the weather. Designed with a thermal element.

We perform installations of concealed glazing bars.

PROTECTION OF THE V-JOINTS

SEAL

Before applying a thick layer of end coating, all the V-joints are additionally protected by a special elastic sealant for protection against the ingress of moisture.

Two permanent elastic Q-Lon weatherstrips are integrated into the window as standard.

VIEW FROM THE OUTSIDE

11

WOODEN PASSIVE WINDOW

NAGODE pasivtherm NAGODE pasivtherm 90 is made of glued window profiles with integrated thermal insulation.

We offer a modern energy-saving wooden window.

The PASIVTHERM system window frame boasts a thermal transmittance factor, which is enhanced by 40% compared to solid glued window frames.

Proper allocation of solid wood areas and areas with insulation in the window profile of the PASIVTHERM window provides high strength, stability and torsional stiffness of the window.

90

ADVANTAGES OF PASIVTHERM WINDOWS: • The thinnest passive wooden window on the market • It is also possible to implement the aluminium/wood coating: the PROTECT 4 or PROTECT 5 programme • The thermal transmittance of the frame is enhanced by 40% • Solid angular joint • Ecological insulating fillers are not visible • Hard polyurethane foam does not contain CFCs and HCFCs • The insulation contains a polyol component, which is produced from rapeseed oil.

• Environmentally-friendly and energy-saving • Contributes to a healthier living environment

HARDWARE The quality German GU hardware enables all possible ways of opening.

The possibility to choose safety or concealed hardware. Standard installation of the micro-ventilation element.

Uf=0,78 W/m2K

ROUNDED EDGES Soft rounded edges on the frame and sash provide an elegant look. They enable a uniform and quality application of the end coating.

GLASS It is possible to install triple panes of glass with the thermal insulation Ug from 0.7 to 0.50 W/m2K.

SURFACE TREATMENT Three- or four-system surface protection of the wood with environmentally friendly water-based coatings. The possibility to choose two-coloured paintwork; a different colour on the outside and on the inside.

GLASS SPACERS You can choose between the aluminium, PVC or rubber implementation of the Super Spacer.

WOOD

GLAZING

The window profile is 90mm thick, made from four layers of wood glued together and filled with rigid polyurethane foam, which increases the thermal conductivity of the frame by 40%. Manufactured exclusively from longitudinally unjointed wood.

The installed glass is lined with wooden shims to increase the constructional strength of the sash.

It is fixed on the internal and external sides with silicone, which is trimmed after application.

SASH DRIP PROFILE It is installed as standard at the lower part of the sash to extend the durability of the window.

GLAZING BARS We perform installations of concealed glazing bars.

FRAMEWORK DRIP PROFILE

SEAL

It protects the most exposed parts of the window from the weather.

The window is equipped as standard with three permanent elastic Q-Lon seals. It is possible to add a fourth seal.

PROTECTION OF THE V-JOINTS

POLYURETHANE FOAM 12

Precision manufacturing provides excellent thermal insulation of the profile.

VIEW FROM THE OUTSIDE

Before applying a thick layer of end coating, all the V-joints are additionally protected by a special elastic sealant for protection against the ingress of moisture.

WOODEN PASSIVE WINDOW

NAGODE hibridtherm

110

Nagode hibridterm 110 has a standard three-layer glazing with a thermal transmittance of Ug=0,70 W/m2K and a Super Spacer between the sheets of glass (j=0,027 W/mK), which further enhances the thermal characteristics of the glass. We can optionally use glazing with lower heat transmittance, which enhances the thermal characteristics. An innovative AEROGEL SPACELOFT®, nanotechnological insulating material is integrated between the layers, which improves the thermal transmittance.

Uf=0,76 W/m2K

CERTIFICATE FOR PASSIVE WINDOWS The criteria for the thermal transmittance of doors and windows for the installation in passive houses were defined by the Passive House Institute in Darmstadt; Germany.

The institute is the leading force for defining standards and promoting passive construction. We are proud to have acquired this certificate, which proves the quality of our furniture.

To mark a window as passive, the frame and the glass must meet certain conditions, namely the frame must have Uf ≤ 0,80 W/m2K and the glass Ug = 0,70 W/m2K. If both conditions are met, the total value of the window must be Uw ≤ 0,80 W/m2K. Taking all this into account, it is also important that the integrated window meets the criterion of the installation Uw ≤ 0,85 W/m2K. Calculations always consider the standardized sample dimension of the window, 123×148cm, and the thermal transmittance of the glass Ug = 0,70W/m2K.

MAIN CHARACTERISTICS OF THE AEROGEL SPACELOFT®: • The thermal conductivity is only 0.013 W/m2K, which is an up to eight times better insulation value for the same thickness compared to standard materials.

• Excellent fire resistance and resistance against the spread of flames and smoke emissions.

• Permanently hydrophobic material at high temperatures.

• Excellent sound insulation at low frequencies.

• Resistant to compression, shockabsorbing. The contraction of the material is less than 1% after 20 years.

• No health hazards; does not contain carcinogens and allergenic substances.

• Environmentally friendly material, which does not chemically compromise the environment.

Restricts infrared radiation. It can be disposed of at landfills and is not radioactive.

13

alu-clad/WOOD WINDOW

NAGODE protect 4

90 Thermal transmittance for spruce windows in accordance with the standard SIST EN 14351-1

DESCRIPTION OF THE WINDOW AND ITS ADVANTAGES Aluminium on the outside and wood on the inside represents a merger of the finest properties.

Wood brings warmth to the interior rooms, while the outside is protected against the weather.

68 VIEW FROM THE OUTSIDE

IMPLEMENTATION IN ALL THICKNESSES:

68

78

90

102

110

HARDWARE

[W/mK]

[W/m2K]

Profil 68 4/16/4 Ug = 1,0

ALU

1,25

TGI

1,18

Profil 78 4/12/4/12/4 Ug = 0,70

ALU

1,00

TGI

0,93

Profil 90 4/12/4/12/4 Ug = 0,70

ALU

0,97

TGI

0,90

Profil 102 4/16/4/16/4 Ug = 0,60

ALU

0,88

TGI

0,81

Profil 110 4/18/4/18/4 Ug = 0,50

ALU

0,80

TGI

0,73

Soft rounded edges on the frame and sash provide an elegant look. They enable a uniform and quality application of the end coating.

SURFACE TREATMENT Three- or four-system surface protection of the wood with environmentally friendly water-based coatings. The possibility to choose two-coloured paintwork; a different colour on the outside and on the inside.

GLASS It is possible to install triple panes of glass with the thermal insulation Ug from 0.7 to 0.50 W/m2K.

GLASS SPACERS You can choose between the aluminium, PVC or rubber implementation of the Super Spacer.

PROTECT 4 ALU MASK Completely protects the window from the weather. Wide variety of colour shades and wood decors.

GLAZING The installed glass is lined with wooden shims to increase the constructional strength of the sash.

It is fixed on the internal and external sides with silicone, which is trimmed after application.

CORNER JOINTS The corner joints are welded or riveted.

Due to the technical properties of aluminium, riveted corner joints are required for larger elements.

PROTECTION OF THE V-JOINTS

GLAZING BARS

Before applying a thick layer of end coating, all the V-joints are additionally protected by a special elastic sealant for protection against the ingress of moisture.

We perform installations of concealed glazing bars.

SEAL

14

Spacer

ROUNDED EDGES

The quality German GU hardware enables all possible ways of opening.

The possibility to choose safety or concealed hardware. Standard installation of the micro-ventilation element.

The window is equipped as standard with three permanent elastic Q-Lon seals. It is possible to add a fourth seal.

Uw

Glass

[W/m2K]

VIEW FROM THE OUTSIDE

alu-clad/WOOD WINDOW 78 NAGODE protect 5 78 Thermal transmittance for spruce windows in accordance with the standard SIST EN 14351-1 Uw

Glass

Spacer [W/mK]

[W/m2K]

Profil 68 4/16/4 Ug = 1,0

ALU

1,25

TGI

1,18

Profil 78 4/12/4/12/4 Ug = 0,70

ALU

1,00

TGI

0,93

Profil 90 4/12/4/12/4 Ug = 0,70

ALU

0,97

TGI

0,90

Profil 102 4/16/4/16/4 Ug = 0,60

ALU

0,88

TGI

0,81

[W/m2K]

DESCRIPTION OF THE WINDOW AND ITS ADVANTAGES Aluminium on the outside and wood on the inside represents a merger of the finest properties. Wood brings warmth to the interior rooms, while the outside is protected against the weather.

Innovative solution without the internal glazing bar – for an elegant look.

VIEW FROM THE INSIDE

IMPLEMENTATION IN THICKNESSES:

68

78

90

102

110

HARDWARE

ROUNDED EDGES

The quality German GU hardware enables all possible ways of opening.

The possibility to choose safety or concealed hardware. Standard installation of the micro-ventilation element.

Soft rounded edges on the frame and sash provide an elegant look. They enable a uniform and quality application of the end coating.

SURFACE TREATMENT

GLASS

Three- or four-system surface protection of the wood with environmentally friendly water-based coatings. The possibility to choose two-coloured paintwork; a different colour on the outside and on the inside.

It is possible to install triple panes of glass with the thermal insulation Ug from 0.7 to 0.50 W/m2K.

GLAZING The level of integrated glass is aligned with the wooden part of the sash. The exterior aluminium mask and the seal rest against the glass. The outside is additionally sealed with silicone.

PROTECT 5 ALU MASK Completely protects the window from the weather. Wide variety of colour shades and wood decors.

GLASS SPACERS

CORNER JOINTS

You can choose between aluminium or PVC implementation.

The corner joints are welded or riveted.

Due to the technical properties of aluminium, riveted corner joints are required for larger elements.

GLAZING BARS An innovative system without the internal glazing bar.

PROTECTION OF THE V-JOINTS

SEAL

Before applying a thick layer of end coating, all the V-joints are additionally protected by a special elastic sealant for protection against the ingress of moisture.

Three permanent elastic seals are installed in the windows as standard.

It is possible to add a fourth seal.

VIEW FROM THE OUTSIDE

15

alu-clad/WOOD WINDOW 78 NAGODE elegance protect 6 78 DESCRIPTION OF THE WINDOW AND ITS ADVANTAGES Aluminium on the outside and wood on the inside represent a union of the best characteristics. Wood brings warmth to indoor spaces, while the outside is protected from the weather.

An elegant solution with a concealed framework and straight lines.

VIEW FROM THE INSIDE

IMPLEMENTATION IN THICKNESSES:

VIEW FROM THE OUTSIDE

78 ROUNDED EDGES

HARDWARE

Soft rounded edges on the frame and sash provide an elegant look.

They enable a uniform and quality application of the end coating.

The quality German GU hardware enables all possible ways of opening.

Concealed hardware serially.

Standard installation of the microventilation element.

SURFACE TREATMENT

GLASS

Three- or four-system surface protection of the wood with environmentally friendly water-based coatings. The possibility to choose twocoloured paintwork; a different colour on the outside and on the inside.

It is possible to install triple panes of glass with the thermal insulation Ug 0.50 W/m2K.

PROTECT 6 ALU MASK

GLAZING

Completely protects the window from the weather. Wide variety of colour shades and wood decors.

The line of the frame and the casement form a straight line on the outside.

The installed glass is lined with wooden shims to increase the constructional strength of the sash.

It is fixed on the internal and external sides with silicone, which is trimmed after application.

CORNER JOINTS The corner joints are welded or riveted.

Due to the technical properties of aluminium, riveted corner joints are required for larger elements.

GLAZING BARS We perform installations of concealed glazing bars.

SEAL PROTECTION OF THE V-JOINTS

The window is equipped as standard with two permanent elastic Q-Lon seals. It is possible to add a third seal.

Before applying a thick layer of end coating, all the V-joints are additionally protected by a special elastic sealant for protection against the ingress of moisture.

additional frameWORK

16

There is a straight line on the inside.

Not only elegance, the thermal insulation of the frame is also increased.

VIEW FROM THE OUTSIDE

WOOD WINDOW 78 NAGODE elegance 78 Thermal transmittance for spruce windows in accordance with the standard SIST EN 14351-

DESCRIPTION OF THE WINDOW AND ITS ADVANTAGES

Uw

Glass

Spacer [W/mK]

[W/m2K]

Profil 68 4/16/4 Ug = 1,0

ALU

1,25

TGI

1,18

Profil 78 4/12/4/12/4 Ug = 0,70

ALU

1,00

TGI

0,93

Profil 90 4/12/4/12/4 Ug = 0,70

ALU

0,97

TGI

0,90

Profil 102 4/16/4/16/4 Ug = 0,60

ALU

0,88

TGI

0,81

Profil 110 4/18/4/18/4 Ug = 0,50

ALU

0,80

VIEW FROM THE INSIDE

TGI

0,73

IMPLEMENTATION IN THICKNESSES:

[W/m2K]

The elegant window with straight lines and concealed framework complements the modern appearance of the rooms.

Cleaning is easy due to the straight lines, while there is also a larger space between the window and the jamb.

A window, where modernity and elegance meet.

ROUNDED EDGES

68

78

90

102

110

HARDWARE

Soft rounded edges on the frame and sash provide an elegant look.

They enable a uniform and quality application of the end coating.

The quality German GU hardware enables all possible ways of opening.

Concealed hardware serially.

Standard installation of the microventilation element.

SURFACE TREATMENT

GLASS

Three- or four-system surface protection of the wood with environmentally friendly water-based coatings. The possibility to choose two-coloured paintwork; a different colour on the outside and on the inside.

It is possible to install triple panes of glass with the thermal insulation Ug from 1,1 to 0,50 W/m2K.

GLAZING The installed glass is lined with wooden shims to increase the constructional strength of the sash. It is fixed on the internal and external sides with silicone, which is trimmed after application

WOOD The window profile up to 110 mm thickness. Our own manufacture assures selected and quality wood.

Manufactured exclusively from longitudinally unjointed wood.

SASH DRIP PROFILE It is installed as standard at the lower part of the sash to extend the durability of the window.

GLASS SPACERS You can choose between the aluminium, PVC or rubber implementation of the Super Spacer.

FRAMEWORK DRIP PROFILE It protects the most exposed parts of the window from the weather.

SEAL The window is equipped as standard with two permanent elastic Q-Lon seals. It is possible to add a third seal.

PROTECTION OF THE V-JOINTS Before applying a thick layer of end coating, all the V-joints are additionally protected by a special elastic sealant for protection against the ingress of moisture.

additional frameWORK

VIEW FROM THE OUTSIDE

There is a straight line on the inside.

Not only elegance, the thermal insulation of the frame is also increased.

17

GLASS/WOOD WINDOW

DESCRIPTION OF THE WINDOW AND ITS ADVANTAGES A Modern window, which only has visible glass on the outside of the casement and no wood, which simplifies maintenance.

An innovative solution without the internal glazing bar – for an elegant look.

The NAGODE trend system can be upgraded with aluminium clad on the NAGODE protect 5 frames.

IMPLEMENTATION IN THICKNESSES:

68

78

90

102

110

ROUNDED EDGES

HARDWARE The quality German GU hardware enables all possible ways of opening.

The possibility to choose safety or concealed hardware. Standard installation of the micro-ventilation element.

Soft rounded edges on the frame and sash provide an elegant look. They enable a uniform and quality application of the end coating.

GLASS

Three- or four-system surface protection of the wood with environmentally friendly water-based coatings. The possibility to choose two-coloured paintwork; a different colour on the outside and on the inside.

SURFACE TREATMENT

It is possible to install triple panes of glass with the thermal insulation Ug from 0.7 to 0.50 W/m2K.

GLASS SPACERS

WOOD

Are optionally available in ALU or PVC material.

The window profile is 78mm thick and made from four layers of wood glued together. Our own manufacture assures selected and quality wood. Manufactured exclusively from longitudinally unjointed wood.

GLAZING The silicone is only visible on the inner side of the window.

ENAMELLED GLASS EDGE

GLAZING BARS

The special version of the external 6mm thick tempered and enamelled glass provides a modern window. The standard enamelling colours are black, anthracite and white.

An innovative system without the internal glazing bar.

SEAL The window is equipped as standard with three permanent elastic Q-Lon seals. It is possible to add a fourth seal.

PROTECTION OF THE V-JOINTS Before applying a thick layer of end coating, all the V-joints are additionally protected by a special elastic sealant for protection against the ingress of moisture.

GLUED GLASS

18

VIEW FROM THE OUTSIDE

VIEW FROM THE INSIDE

78 NAGODE trend 78

The built-in glass is glued to the framework, which increases the structural strength of the sash.

FRAMEWORK DRIP PROFILE VIEW FROM THE OUTSIDE

It protects the most exposed parts of the window from the weather.

PANORAMIC WINDOWS

19

LIFT-SLIDE WINDOWS DESCRIPTION OF BENEFITS

termo

The lift and slide windows enables unlimited architectural solutions considering the width and height of the implementation. It is distinguished by a unique solution with a low threshold and opens easily.

TECHNICAL SPECIFICATIONS

timbe

GU HS 934 • sash weight up to 300 kg • sash width 700-3300 mm • sash height 1851-3250 mm

Possible implementation with aluminium clad NAGODE protect 4 or NAGODE protect 5.

rstep

68

68

step

78

90

110

OPENING IMPLEMENTATIONS

78

A C D E F G1

symmetrical

G1

a symmetrical

H K L 20

OPENING IMPLEMENTATIONS

DESCRIPTION OF BENEFITS The fold and slide windows has a classic high wooden threshold or a low sunken aluminium threshold.

Due to the way of the opening it enables the maximum width of the gateway.

TECHNICAL SPECIFICATIONS ROTO patio 6080 • sash weight up to 80 kg • sash width 450-900 mm • sash height 800-2400 mm low aluminium threshold – passage 18 mm

high wooden threshold – passage 97 mm

FOLD-SLIDE WINDOWS

21

Parallel-slide and tilt windows Description of benefits Parallel-slide and tilt windows can feature a high wooden or low aluminium threshold as well as provides ventilation in the hung version of the sash.

In the heavier variant with a sash weight of up to 200kg it provides automatic opening and closing via a handle.

Technical specifications traditional opening

Technical specifications automatic opening

GU PSK 966/150oZ

GU PSK 966/150mZ

• sash weight up to 130 kg • sash width 640-1600 mm • sash height 700-2350 mm

GU PSK 966/100oZ bb - Alu-threshold • sash weight up to 100 kg • sash width 640-1600 mm • sash height 700-2350 mm

GU PSK 966/200mZ • sash weight up to 200 kg • sash width 720-2000 mm • sash height 820-2370 mm

• sash weight up to 150 kg • sash width 720-2000 mm • sash height 820-2370 mm

OPENING IMPLEMENTATIONS

A A Parallel-slide and turn hardware GU-966/100 oZ bb.

A practical solution for a living comfort without any obstructions on the floor and a simple use: the floor threshold height is only 20mm.

C C G G K

22

Parallel-slide windows Description of benefits The parallel-slide windows features a high wooden threshold. It allows for a simple opening since no turn feature is installed.

In the heavier variant with a sash weight of up to 200kg it provides automatic opening and closing via a handle.

Technical specifications traditional opening GU PS 966/200oZ - no turn feature • sash weight up to 200 kg • sash width 640-2000 mm • sash height 730-2350 mm

OPENING IMPLEMENTATIONS

A A C C D G G K 23

SURFACE PROTECTION WE PROTECT THE SURFACE OF THE DOORS AND WINDOWS IN 4 STEPS: Application 4 – FINAL THICK LAYER OF COATING, optionally DURAFLEX The water-based transparent coating, which has a 250 microns dry application, has exceptional elastic and resistance features for protection against weather conditions and mechanical stresses.

Application 3 – INTERMEDIATE This effectively closes the pores in the wood, forms a bonding layer and regulates the moisture in the wood. After treatment the surface is closed and uniformly even.

Application 2 – PRIMER Effectively works against blue stain fungus in the wood. It is distinguished by the high capacity of equalizing the colour shade of the wood surfaces (equalisation) at a simultaneous high purity (transparency) of the colour tone.

Application 1 – IMPREGNATION A colourless impregnation, which works against wood-decay fungi.

It is distinguished by the ability of deep penetration into the structure of the wood and the strengthening of the structure. It protects wood against moisture.

DURAFLEX TECHNOLOGY: EXCELLENT JOINING OF WOOD AND COATING The Duraflex system can help us achieve optimum durability. Due to the permanent elastic layer the product – especially in case of temperature Î changes – it optimally adjusts to the surface. The innovative agent for protection against light enables high and long-lasting protection of the coating against UV radiation.

Excellent permeable properties of the layer provide exceptionally good retention of moisture in the wood. Due to its properties, the Duraflex coating system provides a high resistance against the weather.

24

Outer shades – SHUTTERS KEEP YOUR HOUSE BEAUTIFUL Shutters give a specific character to the house. The implementation is possible with different opening methods – the shutters can have one, two, three or four wings and can be switched. moving louvres 5-level opening of the shutters with moving louvres

We use two versions of hardware – the simple Jadro 200 hardware in black or grey and the elegant Fentro hardware in black or white.

fixed louvres

full on two fillers

full on one filler

Okoumé-laminated panel

25

ENTRANCE DOORS

26

DOOR MODELS

MV 010

MV 011

MV 012

MV 013

MV 014

MV 020

MV 021

MV 022

MV 030

MV 040

MV 050

MV 055

MV 090

MV 100

MV 110

MV 120

MV 150

MV 160

MV 180

MV 211

27

DOOR MODELS

28

MV 210

MV 200

MV 300

MV 350

MV 380

FV 411

FV 412

FV 413

FV 414

FV 420

FV 421

FV 450

FV 455

FV 500

FV 501

FV 502

FV 503

FV 504

FV 505

FV 540

DOOR MODELS

FV 541

FV 542

FV 545

FV 560

FV 580

FV 590

FV 600

FV 610

FV 620

FV 625

FV 630

FV 631

FV 640

FV 680

FV 690

MV 100sn

MV100s

FV 650s

FV 500n

29

REFERENCES

30

REFERENCES

31

REFERENCES

32

REFERENCES

33

REFERENCES

34

REFERENCES

35

NAGODE www.nagode.si Tržaška cesta 64 1370 Logatec Slovenia

okna in vrata

NAGODE www.nagode.si

Production: agencija@citrus.si

windows doors okna inand vrata

NAGODE www.nagode.si

Advice and orders:

+ 386 1 75 09 676

Preparation of pro forma invoices: + 386 1 32 00 676

Technology: 36

+ 386 1 75 09 677

11/15EN

You are kindly invited our vrata showroom. oknato in

info@nagode.si