Sam Allen accessories for inflatable boats

Accessories for Inflatable Boats

EVOLUTION RUBBER HANDLE Handle developed for PVC inflatable boats of medium and big dimensions.

Manufactured in rubber material

Part No. 39100 260mm x 95mm Light Grey 39102 260mm x 95mm Black 39104 260mm x 95mm Medium Grey

RUBBER HANDLE SAW Code 39120 230mm x 95mm Light Grey

Accessories for Inflatable Boats

LIFELINE RUBBER HANDLE The handle can be utilized as a lifeline. Make a hole on it the same diameter as the rope, tie the rope & fit the knot in the arranged space under the handle.

Part No. 39112 240mm x 105mm Medium Grey

RUBBER OVERTURNABLE ROWLOCK SOCKET The common inconvenience of rowlock sockets is the easily breaking of the metal pins that keep the rowlocks. The new improvement of this socket is the keeping pin on which the rowlock works. Its stainless steel material and its position inside the shape avoid breakings.

PADDLE & OAR HOOK

Part No. 39132 115mm x 95mm Grey Part No. 39108 150mm x 95mm Medium Grey

RING “D” Manufactured in rubber material

ROWLOCK SOCKET

Part No. 39128 95mm x 95mm Grey

Manufactured in rubber material

Part No. 39136 200mm x 95mm Grey

ROPE-GOES Manufactured in rubber material Part No. 39124 95mm x 95mm Grey

RUBBER TERMINAL CONE

BRASS ROWLOCK FOR INFLATABLE BOAT Manufactured in brass material Part No. 39202

Manufactured in rubber material Part No. 39116 165mm Grey

PROTECTION STRIP

ADJUSTABLE NYLON ROWLOCK

For Inflatable Boats Part No. 39160 60mm x 26mm Grey.

22 meter roll.

39164 60mm x 16mm Small Grey.

24 meter roll.

Manufactured in nylon Suits most brands of inflatable boats.

Part No. 39200 Grey

Accessories for Inflatable Boats

Accessories for Inflatable Boats

INFLATION/DEFLATION VALVES New inflation/deflation valves. Height and diameter are very compact. The linkage string has been replaced from a seal system that remains under the closing cap.

It Has a twisting bottom system, push the green bottom and turn at 90째 for opening and closing. Saw Code 39158 has an edge on the cage that holds the body valve inside the tubular.

39150

39154

39158

Part No. Overall Dia. 39150 Grey In/Deflate Valve Push Turn 55mm

Twisting bottom release 39154 Inflate Deflate Valve

Twisting bottom release

68mm

39158 Inflate Deflate Valve Grey

Twisting Bottom encased

63mm

S/S SNAP DAVITS To be mounted on the bridge or directly on transom of the boat. Release type fastener made of stainless steel. Universal model for the horizontal or vertical assembly in order to allow for an easy use of the service tender.

Part No. 39190 Kit to suit PVC Inflatable Boats 39192 Kit to suit Neoprene Inflatable Boats 39194 Quick release plates for Snap Davits 39193 PVC Dingy Pad for Snap Davits 39195 Grey Rubber Pad for Snap Davits 39196 Snap Davit Platform Clip Assembly 39197 SS W bar with clips

PRESSURE RELIEF VALVE The new pressure relief valve has to be inserted between the inflatable boat and the air source, inflator, electric inflator or air compressor. When overtaking the best pressure the valve releases the surplus air. It replaces the pressure-gauce.

When the inflatable boat is too inflated, through inserting the pressure relief valve into the inflation/deflation valve, the surplus air will be released leading the inflatable boat at its best pressure. It could be fit to all inflators and to the main valves that are in the market.

39196

39197

SS SNAP DAVIT HOLDING BARS

Made of stainless steel telescopic pipes.

Part No. mm/bar 39159 243

Part No. 39198

psi kpa 3.52 24.3

PRESSURE GAUGE Part No. 39180 Stainless Steel

pressure gauge 39182 ABS pressure gauge

TRANSOM PROTECTION PLATES Manufactured in light aluminium alloy.

Part No. 39400 300mm x 90mm 39404 200mm x 95mm

Accessories for Inflatable Boats

Accessories for Inflatable Boats

SLOTTING SHEET CLEAT/BOLLARD Can be used as a cleat or bollard for inflatable boats. Suitable for rope thickness of 16mm max. Available in rubber material or PVC. When sticking rubber material articles it is enough to clean prepared area with a normal detergent and does not need to be scraped.

Part No. 39138 39140

Width Base 192mm 192mm

Length 240mm 240mm

Material Grey Rubber Grey PVC

RUBBER/PVC CLEAT Very practical cleat for mooring inflatable boats. The big base avoids the rope rubbing on the boats inflatable tube.

Available in rubber material or PVC. When sticking rubber material articles it is enough to clean prepared area with a normal detergent and does not need to be scraped.

Part No. 39147 39148

Width 160mm 160mm

Length 315mm 315mm

Material Grey Rubber Grey PVC

PULLEY/BOLLARD Can be used as a pulley or bollard for inflatable boats. Suitable for rope thickness of 16mm max.

Available in rubber material or PVC. When sticking rubber material articles it is enough to clean prepared area with a normal detergent and does not need to be scraped.

Part No. 39144 39145

Width Base 192mm 192mm

Length 240mm 240mm

Material Grey Rubber Grey PVC

DINGHY PUMP

Single / Double action pump for inflatable boats and water toys.

Supplied with walk on flexible hose.

Part No. 23152

BRAVO HEAVY DUTY FOOT PUMPS

Heavy duty footpump particularly suitable for synthetic or rubber coated fabric boats.

Features * Fiber glass charged polyamide plates * Reinforced fabric coated bellow * All stainless steel metal parts * Reinforced hose Part No. * Universal adaptor 39208 Bravo 1 5ltr capacity * Dimensions 26 x 20 x 8cm 39209 Bravo 2 6.5ltr capacity

BRAVO 10 DOUBLE CHAMBER FOOT PUMP With BRAVO 10 double chamber pump, inflation to the reccomended pressure of all fabric or rubberrised boats, can easily be achieved with very limited effort. Should you not use a pressure gauge to control the boat pressure, BRAVO 10 footpump is provided with a visual pressure indicator to warn against over-inflation. Manufactured from a strong nylon reinforced fiber glass. Unalterable by the sun or sea environment. Big but lightweight due to the use of modern syntetic materials only weighs 1.9 kg and has 4 antislip feet for greater stability. Standard crush resistant hose. Universal hose/valve adaptors supplied as standard. All stainless steel metal parts. Dimension: 35 x 25 x 8cm Part No. 39210 Bravo 10 39213 Guage to suit Bravo 10 Pump

39213

TWIN CHAMBERS HEAVY DUTY FOOT INFLATOR Twin-chambers foot inflator reachable pressure 11.7 PSI PVC hose with double layer for high pressure. Gaskets made of silicon rubber 1.5mm thickness. Internal chamber made of heavy fabric Part No. 39211 Bravo 10 High Pressure 39214 Guage to suit Bravo Pumps

39214

Accessories for Inflatable Boats

Accessories for Inflatable Boats

12V HEAVY DUTY ELECTRIC INFLATOR Automatic boat inflator thats fast, reliable, powerful with automatic pressure regulator.

Fast about 150l/min Powerful - maximum pressure 300 mbar Adjustable - pressure selectable between 150 to 300 mbar Safety - automatic stop at selected pressure Economy - bravo 12 has an average consuption of 9A only.

Complete with universal adaptor Can inflate and deflate Part No. 39212 Dimensions 23 x 13 x 13cm Weight - 1.1kg

12v ELECTRIC INFLATOR Suitable for 3, 5 & 4 meter inflatable boats. Inflation Deflation in 6 to 7 minutes. Maximum pressure 300 mbar. Pressure selectable between 150 to 300 mbar.

It has an average consumption of 9 amps only, and it is fast about 200 Lt /min.

Supplied with universal adaptors.

Part No. 39300 12v electric Inflator

BRAVO SUPERTURBO 12V KITE PUMP Recommended for medium and large sized kites.

It also works with small valves without the risk of STOP & GO. It is more rapid because it is equipped with 2 modules (tubine & pistons) with automatic cutover.

Output Turbin: 500L/min Output Piston: 150L/min Pressure: Up to 12psi (800mbar) Consumption: 15-20A Carry bag dimension: 18 x 18 x 28cm Weight: 4.8kg Part No. 39222

BRAVO 12V KITE PUMP Recommended for small and medium sized kites.

Inflator with double membrane and a new valve that increase efficiency and reliability.

Output: 150L/min Pressure: Up to 7.5psi (520mbar) Consumption: 10-14A Carry bag dimension: 25 x 25 x 13cm Weight: 4kg Part No. 39220

PLASTIC BELLOWS PUMP 5 Litre Manufactured in strong and resistant plastic material with hose and universal adaptors to inflate all kinds of inflatable boats.

BRAVO TURBO MAX KIT Part No. 23156

BRAVO DOUBLE CHAMBER PUMP HIGH EFFICIENCY - HIGH PRESSURE Double chamber with a device allowing the use of the optimal inflating capacity for both the tubes and the bottom at high pressure.

Kit version for permanent mounting includes: the screws, brackets and inflation connectors.

The bag is not supplied. The power cable is 0.5m long and has a 100 A CONNECTOR cabled.

Part No. 39218

Dimensions: 32 x 23 x 7cm High Part No. 39211A To Inflate

BRAVO SUPERTURBO 12HP To Deflate

Tubolars

Closed: Max Pressure 0,3 bar (4.4psi)

Floor

Opened: Max Pressure 1,0 bar (14.7psi)

Large air flow: 450l/min Automatic: Stops when the chosen pressure is reached.

Reliable: The combined solution “turbine & piston� allows to eliminate those parts which are subject to mechanical wear & tear.

It can inflate & deflate Much more reliable More powerful motor Motor gear made of brass 3m cable of bigger diameter Weight: 1.9kg

Part No. 39216