Developer Pack: R230465

Developers Packet

Subject Property

3056 N/NE Rocky Butte Rd, Portland OR. 97220 1N2E28AC -01600 Alt. Tax ID #: R230465 Jurisdiction: City of Portland/ Multnomah County Tax Lot #:

Compliments of WFG National Title Insurance Company Customer Service Department

Table of Contents 

Property Details



Utilities (Water, Sewer & Gas)



Zoning



Custom Maps



Miscellaneous Items -Demographics -Traffic Report

The information contained is provided by WFG’s Customer Service Department as a courtesy to our customers, and while deemed reliable, is not guaranteed.

Property Details 

Property Tax Information



Assessors Tax Map



Vesting Deed



Plat

Property Detail Report Owner: Martin, Marianne Trust Site: 3056 N/ NE Rocky Butte Rd Portland OR 97220 Mail: 1131 NE 71st Ave Portland OR 97213

Multnomah County Data as of: 07/27/2021

Location and Site Information County: Legal Description: APN: Tax Lot: Twn-Rng-Sec: Neighborhood: Subdivision: Legal Lot/Block: Census Tract/Block

Multnomah OLYMPUS ESTATES, BLOCK 3, LOT 14 R230465 1N2E28AC01600 01N / 02E / 28 / NE Madison South Olympus Estates 14 / 3 002903 / 1005

Lot SqFt: Lot Acres: Land Use: Land Use STD: County Bldg Use: # Dwellings: Map Page/Grid: Zoning: Watershed:

12,588 0.29 100 - Residential, Unimproved Single Family Residence RSFR - Vacant Land 597-H3 Portland-R7 Columbia Slough-Willamette River

Property Characteristics Total Living Area: First Floor SqFt: Second Floor SqFt: Basement Fin/Unfin: Attic Fin/Unfin: Garage SqFt:

Bedrooms: Bathrooms Total: Bathrooms Full/Half: Stories: Foundation: Roof Material:

Year Built/Eff: Heating: Cooling: Fireplace: Pool: Kitchen:

0

Assessment and Tax Information Market Total: Market Land: Market Structure: Asssessment Year: Assessed Total:

$218,250.00 $218,250.00 2020 $83,310.00

Property Tax: Exemption: Market Improved %: Levy Code: Mill Rate:

$2,112.66

378 25.3590

Sale and Loan Information Sale Date: Sale Amount: Document #: Deed Type: Title Co:

02/20/2009 21958 Deed

Lender: Loan Amount: Loan Type: Price/SqFt: Seller Name:

$0.00 $0.00 MARTIN MARIANNE

Prepared By: WFG National Title Customer Service Department 12909 SW 68th Pkwy, Suite 350, Portland, OR 97223 P: 503 603 1700 | 360 891 5474 E: cs@wfgnationaltitle.com | cccs@wfgtitle.com

Sentry Dynamics, Inc. and its customers make no representation, warranties or conditions, express or implied, as to the accuracy or completeness of information contained in this report.

Assessor Map

Parcel ID: R230465 Site Address: 3056 N/ NE Rocky Butte Rd Sentry Dynamics, Inc. and its customers make no representations, warranties or conditions, express or implied, as to the accuracy or completeness of information contained in this report.

This map/plat is being furnished as an aid in locating the herein described land in relation to adjoining streets, natural boundaries and other land, and is not a survey of the land depicted. Except to the extent a policy of title insurance is expressly modified by endorsement, if any, the company does not insure dimensions, distances, location of easements, acreage or other matters shown thereon.

7/1/20 TO 6/30/21 REAL PROPERTY TAX STATEMENT Multnomah County Oregon ∗ PO Box 2716 ∗ Portland, OR 97208-2716 Phone: 503-988-3326 www.multcotax.org

ACCOUNT NO:

PROPERTY DESCRIPTION CODE AREA:

SITUS: 3056 N/ NE ROCKY BUTTE RD OLYMPUS ESTATES, BLOCK 3, LOT 14

MARTIN,MARIANNE TR 1131 NE 71ST AVE PORTLAND OR 97213

VALUES:

LAST YEAR

MARKET VALUES: LAND STRUCTURE NET RMV TAXABLE VALUES: NET ASSESSED VALUE

218,250 0 218,250

80,890

83,310

CITY OF PORTLAND BONDS METRO BONDS PORTLAND PUBLIC SCHOOLS BONDS AND MISC TAXES:

PROPERTY TAXES:

$2,034.63

38.83 386.40 165.79 33.96 $624.98

CITY OF PORTLAND CITY OF PORTLAND CHILD LOC OPT EAST MULT SOIL & WATER CD-GOV METRO LOC OPT PORTLAND FIRE/POLICE PENSION URBAN RENEWAL - PORTLAND PORT OF PORTLAND METRO MULTNOMAH COUNTY MULT CO HIST SOCIETY LOC OPT MULTNOMAH COUNTY LIBRARY GENERAL GOVERNMENT TAXES:

THIS YEAR

218,250 0 218,250

R230465

378 2020-21 CURRENT TAX BY DISTRICT: MT HOOD COMMUNITY COLLEGE PORTLAND PUBLIC SCHOOLS PORTLAND PUBLIC SCHOOLS LOC OPT MULTNOMAH ESD EDUCATION TAXES:

$2,112.66

339.26 33.54 7.60 8.00 204.46 226.72 5.22 7.20 321.82 4.17 90.43 $1,248.42 31.99 29.74 177.53 $239.26

BONDS

2020-21 TAX (Before Discount)

$2,112.66

The Multnomah Building is temporarily open for in-person Property Tax Payments Only. Please visit proptax.multco.us or call (503) 9883326 for payment options, service hours, and information.

TAX PAYMENT OPTIONS

(See back of statement for payment instructions)

Pay By In Full 2/3 1/3

Discount

Net Amount Due

11/16/20

63.38

$2,049.28

11/16/20

28.17

$1,380.27

11/16/20

NONE

$704.22

DELINQUENT TAXES:

$0.00 $2,049.28

TOTAL (After Discount):

PLEASE MAKE PAYMENT TO: Multnomah County

PLEASE DETACH STUB AND RETURN WITH PAYMENT. RETAIN TOP PORTION FOR YOUR RECORDS. OREGON PROPERTY TAX YEAR

July 1, 2020 to June 30, 2021

Multnomah County Property Taxes Property Address

3056 N/ NE ROCKY BUTTE RD PORTLAND, OR 97220 DO NOT WRITE IN SPACE BELOW

0001230465

0000070422

PLEASE MAKE PAYMENTS TO:

Code Area

Account Number

Tax Collector, Multnomah County

378

R230465

Net Amount

Amount Paid

Payment Options: IN FULL 11/16/20

2/3 1/3

$2,049.28

11/16/20 11/16/20

$1,380.27 $704.22

Discount is lost and interest applied after due date

0000138027

0000204928

08

Pay Online

WRITE MAILING ADDRESS CHANGES IN AREA BELOW MARTIN,MARIANNE TR 1131 NE 71ST AVE PORTLAND OR 97213

25129

Aerial Map

Parcel ID: R230465 Sentry Dynamics, Inc. and its customers make no representations, warranties or conditions, express or implied, as to the accuracy or completeness of information contained in this report.

Utility As Builts Water As Built Maps City of Portland

Sewer As Built Maps City of Portland NW Natural As Built Maps

Thei nf or mat i oncont ai nedi spr ovi dedbyWFG’sCust omerSer vi ceDepar t ment asacour t esyt oourcust omer s,andwhi l edeemedr el i abl e,i snotguar ant eed.

N.E.

CA

/4"

#3 434

AV E

#10231

15'

15'

.

.

PL

NE

N.E.

CL

D

1-1

O

(P)

1-026-041

(W) 1"

AVE.

T DE

1" (W )

.

1-026-041

AVE .

(W)

#34 40

O

AV E

1" (W)

1-027-041

W AY

D

1"

M

#34 10

(W )

. 9 2N

1-027-040

E

1"

#34 04

#33 44

#33 40

(W ) 1"

#33 36

#33 03

#32 33

#33 24

#3306

N.E.

5'

CAD

ET

17'

BA

BRIDGE

#3234 12'

10 13' 9

3

H RT O N 6

2

R STA

.

MP RA

#3155

#3152

#3138

5

7'

/8"

1" (W)

N.E.

AVE.

#10238

9'

14'

1" (W)

#10245

#10311

#10231

#10302

#10220

#10208

#10214

#10311

(P)

.

1-027-040

1-028-040

Meter Location with Address

250 SW Taylor Street, Portland, Oregon 97204 (503) 226-4211

Plat Index

50 25

0

50

1 inch = 100 feet

100 Feet

#10307

#10305

#10221

9'

CL

1-026-040 1-026-041

1-027-039

1-027-040 1-027-041

1-028-039

1-028-040 1-028-041

#10310

#10244

L

1-026-039

7' S. OF C

#2424

Gas Pipe City Limit

1-028-041

2" (P)

(P) 2"

#10 230

Legend

#2505

Legal Location: T01N R02E Sec28 NE State: OREGON County: MULTNOMAH City: MAYWOOD PARK/PORTLAND Wallmap: E. PORTLAND AVE.

#93 25

10'

NW Natural does not warrant the accuracy of this map.

It should be used for informational purposes only.

For a current and exact location of facilities, call your local utility locate center. #2424

R.R.

27'

#2504

C L

#2506

(U.S. 30) (S TATE HW

Y 2)

26'

NE #92 33

AVE.

6-5 /8" (W)

14'

#2514

#2532 ('91)

1" (W)

14'

#2436 ('98)

1-027-041

1-028-041

(P) 1-1 /4"

93RD

1-028-040

#9117

#9127

#2505

#2510

1-1/4"

10'

AVE.

#2524

1-028-039

14'

#2540

#10310

TE

#10243

BU

1-028-040

#9112

Y

#2549

/8 " (W) 6-5

#9130 #9132

CK

#2612

(P) 2"

13'

12'

/8"

RO

#2554

2" (P)

RD

6-5

#9102

#10309

(W) 1" (W) 1" CL

102ND

05 #3023

10'

6 #29 4

NE RUSSEL

#10306

I-2

/8"

#9107

6-5

#9116

N.E.

2"

45 #29

#1 03 03

) (W #2543

#9107

IS S T.

2"

2" (P)

) (W

#9026

4)

#3029

2"

(P) 1-1 /4"

#9102

#26 46

8'

6-5 1-028-039

17.5'

#2701 ('98)

( ST . HW

41 #29

2" (W) 2" (W)

(W)2" (W) 2" 1-027-039

#9029

#3020

#2716

(P) 2"

34 #29

12'

37 #29

N.E.

2" (P)

#2733

Y6

12'

10'

ST.

#9030

#3037

. ' 14

ST.

EASE.#489

#3024

30 #29

#2619

2"

E AV

6 62 #2

6 60 #2

#2623

WARREN N.W. CO.

31 #29

#2615

/8" 13 #26

#2816

4'

265

#30 28

(W) 2"

2"

6-5

19 #26

5'

I 84

) (P

) (W

5'

#2834

(W) 1"

NE

(W) 2"

2 03 #3

#2631 #2627

1 26 3

#2848

.

5 63 #2

3 04 ) #3 43 3 (#3

EASE. #2683

(P) 2"

#2905

RD

9 63 #2

#3004

#2930

E TT

8 #27 0

#3020

O RR

BU

4'

#26 43

7'

#2919

BANF I EL D

0 15 #4

Y 4 91 #2

#26 47

EASE.#488

SE EA

CK

2 ND

#27 12

#3056

' 12

0 #27 2

(P) 2"

2" (P)

#29 15

RO

#27 26

2"

#10 217

E. N.

0 91 #2

11'

NE M

#30 63

6 90 #2

#2804

#2810

12'

02 #29

OFFICE AND SHOP

#2820

N.E.

R OC K Y

#3103 (92)

N.E. MORRIS CT.

1" 1"

N.E.

O.

#28 28

R OC K Y

#2868

#31 02

(P) 2"

BUTTE

#31 05

#3102-A

8'

#3007

FRE E

#3111

WA Y

#3110 ('92)

#31 07

#2840

(P) 1-1 /4"

#3025

W. R. & N. C O.

12'

#3102

7'

#3041

RD. 2" (W)

#28 42

#3123

2"

.3

#3120

#2831

#28 32

26'

0)

#3117

#3053

1-027-040 1-027-041

(ST AT E

#3123

#2827 ('92)

28 #28

BUT T E

)

12'

(U. S

#3004 #3008 #2922 ('92)

Y2

2"

#3128

HW

(P)

#3129

12'

RETA INING WAL L

255

23 #28

(P) 2"

1-027-039 1-027-040

1

#3012

20'

#31 27

PERMIT #465

#3104

#3022

#10 300

5

#10234

RD

BU Y

3

CK

4

#3 12 4

13'

EI VI ST AH

SU

#31 3 2

.

C

(W) 1"

#10 240

RD.

13'

14

6 #311

#3114

7 12 #3

#3140

13

RO

4

2

K

5 13 #3

#3145 #3124

RO

3'

VIS

#3134

8

1

N. E.

S HT EI G

7

TA H

5

8 #31 4

BD

21 #31

43 #31

#3144

3'

3'

YB U T T E L N.

8'

13'

9

6

#31 54

12

GH

7

4

250

TS

8

I - 20

L

TT E

TU

E NN

' 13

#32 12

#3204

I8

11

2" (P)

NE

#3214

#1030 4

(W)

1"

8'

D

8'

#3224

N

LE FI

103RD

#33 24

#10329

#33 17

#10324

#3 ('9 3 36 1)

13 '

#10312

#33 33

102ND

#34 08

(ST. HWY 64)

(W )

#3508

N

#34 20

#3526

1-026-040

1"

30 #90

#34 05

#34 34

N.E. FREMONT ST.

1-026-040

#3446

2"

8 03 #9

16'

1"

102ND

.

CADET AVE N.E. 1" (W)

(W

1-026-039

NE 92ND AVE.

2"

)

NT O M FR E

2"

#3534

15.5'

16'

13' #34 33

#34 44

#3556

#3533

6 53 #3

#3452

10'

N.E

) (P

' 12

#3521

1-026-039

#34 35

10 '

#3545

16'

#34 33

#34 11

0 24

#3510

1-027-039

#3 43 1

2 54 #3

)

#3511

01 #92

(W

#35 14

#3606 #3607

C A D E MY

1"

#3635

6 56 #3

O P

#35 22

1"

19'

12'

SH

.

PL

#3 53 4

A

MILITARY

HILL

(W)

#9 02 5

#9210

#9 04 1

#3526

NE

1-

2" (W)

ST.

#3607

1-026-040

#3546

Plat ID:

1-027-040

Plot Date: 7/30/2021

R:\Engineering\Drafting_Docs\Reference_Documents\EMaps\EmapsR1.mxd

Zoning 

Detailed Zoning Information

•

Portland Zone Change Sum



Zoning Map



Community

Overlay Zone

For Additional Zoning Information Contact: City of Portland Bureau of Development Services 503.823.7300

Title 33, Planning and Zoning 8/1/21

Chapter 33.110 Single-Dwelling Zones

33.110 Single-Dwelling Zones

110

Sections: General 33.110.010 Purpose 33.110.020 List of the Single-Dwelling Zones 33.110.030 Other Zoning Regulations 33.110.050 Neighborhood Contact Use Regulations 33.110.100 Primary Uses 33.110.110 Accessory Uses Development Standards 33.110.200 Housing Types Allowed 33.110.202 When Primary Structures are Allowed 33.110.205 Minimum Dwelling Unit Density 33.110.210 Floor Area Ratio 33.110.215 Height 33.110.220 Setbacks 33.110.225 Building Coverage 33.110.227 Trees 33.110.230 Main Entrances 33.110.235 Street-Facing Facades 33.110.240 Required Outdoor Areas 33.110.245 Detached and Connected Accessory Structures 33.110.250 Additional Development Standards for Garages 33.110.255 Additional Development Standards for Flag Lots 33.110.260 Additional Development Standards for Narrow Lots 33.110.265 Residential Infill Options 33.110.270 Institutional Development Standards 33.110.275 Fences 33.110.280 Retaining Walls 33.110.285 Demolitions 33.110.290 Nonconforming Situations 33.110.292 Parking and Loading 33.110.295 Signs

General 33.110.010 Purpose The single-dwelling zones are intended to preserve land for housing and to provide housing opportunities for individual households. The zones implement the comprehensive plan policies and designations for single-dwelling housing and provide options for infill housing that is compatible with the scale of the single-dwelling neighborhood.

110-1

Chapter 33.110 Single-Dwelling Zones

Title 33, Planning and Zoning 8/1/21

A.

Use regulations. The use regulations are intended to create, maintain and promote singledwelling neighborhoods. They allow for some non-household living uses but not to such an extent as to sacrifice the overall image and character of the single-dwelling neighborhood.

B.

Development standards. The development standards preserve the character of neighborhoods by providing six different zones with different densities and development standards. The development standards work together to promote desirable residential areas by addressing aesthetically pleasing environments, safety, privacy, energy conservation, and recreational opportunities. The site development standards allow for flexibility of development while maintaining compatibility within the City's various neighborhoods. In addition, the regulations provide certainty to property owners, developers, and neighbors about the limits of what is allowed. The development standards are generally written for houses on flat, regularly shaped lots. Other situations are addressed through special regulations or exceptions.

33.110.020 List of the Single-Dwelling Zones The full names, short names, and map symbols of the single-dwelling residential zones are listed below. When this Title refers to the single-dwelling zones, it is referring to the six zones listed here.

When this Title refers to the residential zones, or R zones, it is referring to both the single-dwelling zones in this chapter and the multi-dwelling zones in Chapter 33.120. The Residential Farm/Forest zone is intended to generally be an agricultural zone, but has been named Residential Farm/Forest to allow for ease of reference.

Full Name Residential Farm/Forest Residential 20,000 Residential 10,000 Residential 7,000 Residential 5,000 Residential 2,500

Short Name/Map Symbol RF R20 R10 R7 R5 R2.5

33.110.030 Other Zoning Regulations The regulations in this chapter state the allowed uses and development standards for the base zones. Sites with overlay zones, plan districts, or designated historical landmarks are subject to additional regulations. The Official Zoning Maps indicate which sites are subject to these additional regulations. Specific uses or development types may also be subject to regulations in the 200s series of chapters.

33.110.050 Neighborhood Contact Neighborhood contact is a set of outreach steps that must be taken before certain developments can be submitted for approval. Neighborhood contact is required as follows: A.

Neighborhood contact I. 1.

Neighborhood contact I requirements. When proposed development will add at least 10,000 square feet and not more than 25,000 square feet of net building area to a site, the neighborhood contact steps of 33.705.020.A., Neighborhood contact I are

110-2

Title 33, Planning and Zoning 8/1/21

Chapter 33.110 Single-Dwelling Zones

required. All the steps in 33.705.020.A. must be completed before an application for a building permit can be submitted.

2.

B.

Exemption. If the proposed development has already met the neighborhood contact requirements as part of a land use review process, it is exempt from the neighborhood contact requirements.

Neighborhood contact II. 1.

Neighborhood contact II requirements. When the proposed development will add more than 25,000 square feet of net building area to a site, the neighborhood contact steps of 33.705.020.B., Neighborhood contact II, are required. All of the steps in 33.705.020.B. must be completed before an application for a building permit can be submitted.

2.

Exemption. If the proposed development has already met the neighborhood contact requirements as part of a land use review process, it is exempt from the neighborhood contact requirements.

Use Regulations 33.110.100 Primary Uses A.

Allowed uses. Uses allowed in the single-dwelling zones are listed in Table 110-1 with a "Y".

These uses are allowed if they comply with the development standards and other regulations of this Title. Being listed as an allowed use does not mean that a proposed use will be granted an adjustment or other exception to the regulations of this Title. In addition, a use or development listed in the 200s series of chapters is also subject to the regulations of those chapters.

B.

Limited uses. Uses allowed that are subject to limitations are listed in Table 110-1 with an "L". These uses are allowed if they comply with the limitations listed below and the development standards and other regulations of this Title. In addition, a use or development listed in the 200s series of chapters is also subject to the regulations of those chapters. The paragraphs listed below contain the limitations and correspond with the footnote numbers from Table 110-1.

1.

Group Living. This regulation applies to all parts of Table 110-1 that have note [1]. Up to 3,500 square feet of the total net building area on the site can be in a Group Living Use. More than 3,500 square feet of net building area in Group Living is a conditional use.

2.

Retail Sales And Service. This regulation applies to all parts of Table 110-1 that have a [2]. Retail plant nurseries are a conditional use. All other Retail Sales And Service uses are prohibited.

3.

Manufacturing And Production. This regulation applies to all parts of Table 110-1 that have a [3]. Utility Scale Energy Production from large wind turbines is a conditional use in the RF zone. All other Manufacturing And Production uses are prohibited.

4.

Basic Utilities. This regulation applies to all parts of Table 110-1 that have a [4].

110-3

Chapter 33.110 Single-Dwelling Zones

Title 33, Planning and Zoning 8/1/21

a.

Basic Utilities that service a development site are accessory uses to the primary use being served.

b.

Small Scale Energy Production that provides energy for on-site or off-site use are considered accessory to the primary use on the site. Installations that sell power they generate—at retail (net, metered) or wholesale—are included. However, they are only considered accessory if they generate energy from biological materials or byproducts from the site itself, or conditions on the site itself; materials from other sites may not be used to generate energy. The requirements of Chapter 33.262, Off Site Impacts must be met.

c.

All other Basic Utilities are conditional uses.

5.

Community Service Uses. This regulation applies to all parts of Table 110-1 that have a [5]. Most Community Service uses are regulated by Chapter 33.815, Conditional Uses.

Short term, mass, and outdoor shelters are regulated by Chapter 33.285, Short Term, Mass, and Outdoor Shelters.

6.

Parks And Open Areas. This regulation applies to all parts of Table 110-1 that have a [6]. Parks And Open Areas uses are allowed by right. However, certain accessory uses and facilities that are part of a Parks And Open Areas use require a conditional use review. These accessory uses and facilities are listed below. a.

Swimming pools.

b.

Cemeteries, including mausoleums, chapels, and similar accessory structures associated with funerals or burial.

c.

Golf courses, including club houses, restaurants and driving ranges.

d.

Boat ramps.

e.

Parking areas.

f.

Recreational fields for organized sports. Recreational fields used for organized sports are subject to the regulations of Chapter 33.279, Recreational Fields for Organized Sports.

7.

Daycare. This regulation applies to all parts of Table 110-1 that have a [7]. Daycare uses are allowed by right if locating within a building that contains or contained a College, Medical Center, School, Religious Institution, or a Community Service use.

8.

Agriculture in RF and R20 zones. This regulation applies to all parts of Table 110-1 that have an [8]. Agriculture is an allowed use. Where the use and site meet the regulations of Chapter 33.237, Food Production and Distribution, the applicant may choose whether it is allowed as a Market Garden.

9.

Agriculture in R10 and R7 zones. This regulation applies to all parts of Table 110-1 that have a [9]. Agriculture is a conditional use. Where the use and site meet the regulations of Chapter 33.237, Food Production and Distribution, the applicant may choose whether it is allowed as a Market Garden, which does not require a conditional use.

110-4

Title 33, Planning and Zoning 8/1/21

Chapter 33.110 Single-Dwelling Zones

10. Agriculture in R5 and R2.5 zones. This regulation applies to all parts of Table 110-1 that have a [10]. If the use and site do not meet the regulations of Chapter 33.237, Food Production and Distribution, Agriculture is prohibited.

11. Radio Frequency Transmission Facilities. This regulation applies to all parts of Table 110-1 that have an [11]. Some Radio Frequency Transmission Facilities are allowed by right. See Chapter 33.274.

C.

Conditional uses. Table 110-1. Uses that are allowed if approved through the conditional use review process are listed in Table 110-1 with a "CU". These uses are allowed provided they comply with the conditional use approval criteria for that use, the development standards, and other regulations of this Title. Uses listed with a "CU" that also have a footnote number in the table are subject to the regulations cited in the footnote. In addition, a use or development listed in the 200s series of chapters is also subject to the regulations of those chapters. The conditional use review process and approval criteria are stated in Chapter 33.815, Conditional Uses.

D.

Prohibited uses. Uses listed in Table 110-1 with an "N" are prohibited. Existing uses in categories listed as prohibited may be subject to the regulations of Chapter 33.258, Nonconforming Uses And Development.

33.110.110 Accessory Uses Accessory uses to a primary use are allowed if they comply with all development standards.

Accessory home occupations, accessory dwelling units, and accessory short-term rentals have specific regulations in Chapters 33.203, 33.205, and 33.207 respectively.

Table 110-1 Single-Dwelling Zone Primary Uses Use Categories Residential Categories Household Living Group Living Commercial Categories Retail Sales And Service Office Quick Vehicle Servicing Vehicle Repair Commercial Parking Self-Service Storage Commercial Outdoor Recreation Major Event Entertainment Industrial Categories Manufacturing And Production Warehouse And Freight Movement Wholesale Sales Industrial Service

RF

R20

R10

R7

R5

R2.5

Y L/CU [1]

Y L/CU [1]

Y L/CU [1]

Y L/CU [1]

Y L/CU [1]

Y L/CU [1]

CU [2] N N N N N N N

CU [2] N N N N N N N

CU [2] N N N N N N N

CU [2] N N N N N N N

CU [2] N N N N N N N

CU [2] N N N N N N N

CU [3] N

N N

N N

N N

N N

N N

N N

N N

N N

N N

N N

N N

110-5

Chapter 33.110 Single-Dwelling Zones

Title 33, Planning and Zoning 8/1/21

Bulk Fossil Fuel Terminal N N N N N N Railroad Yards N N N N N N Waste-Related N N N N N N Institutional Categories Basic Utilities L/CU [4] L/CU [4] L/CU [4] L/CU [4] L/CU [4] L/CU [4] Community Service L/CU [5] L/CU [5] L/CU [5] L/CU [5] L/CU [5] L/CU [5] Parks And Open Areas L/CU [6] L/CU [6] L/CU [6] L/CU [6] L/CU [6] L/CU [6] Schools CU CU CU CU CU CU Colleges CU CU CU CU CU CU Medical Centers CU CU CU CU CU CU Religious Institutions CU CU CU CU CU CU Daycare L/CU [7] L/CU [7] L/CU [7] L/CU [7] L/CU [7] L/CU [7] Other Categories Agriculture L [8] L [8] L/CU [9] L/CU [9] L [10] L [10] Aviation And Surface Passenger Terminals CU N N N N N Detention Facilities N N N N N N Mining CU N N N N N Radio Frequency Transmission L/CU [11] L/CU [11] L/CU [11] L/CU [11] L/CU [11] L/CU [11] Facilities Railroad Lines And Utility CU CU CU CU CU CU Corridors Y = Yes, Allowed L = Allowed, But Special Limitations CU = Conditional Use Review Required N = No, Prohibited Notes: • The use categories are described in Chapter 33.920.

• Regulations that correspond to the bracketed numbers [ ] are stated in 33.110.100.B. • Specific uses and developments may also be subject to regulations in the 200s series of chapters.

Development Standards 33.110.200 Housing Types Allowed A.

Purpose. Housing types are limited in the single-dwelling zones to maintain the overall image and character of the City's single-dwelling neighborhoods. However, the regulations allow options to increase housing variety and opportunities, and to promote affordable and energy-efficient housing.

B.

Housing types. The kinds of housing types allowed in the single-dwelling zones are stated in Table 110-2.

110-6

Title 33, Planning and Zoning 8/1/21

Housing Type House

Chapter 33.110 Single-Dwelling Zones

Table 110-2 Housing Types Allowed In The Single-Dwelling Zones

Attached house (See 33.110.260.C and 33.110.265.C) Accessory dwelling unit (See Chapter 33.205) Duplexes: On corners (See 33.110.265.D) Other situations (See 33.110.265.D) Triplexes (See 33.110.265.E) Fourplexes (See 33.110.265.E) Multi-dwelling Structure (See 33.110.265.F) Manufactured home (See Chapter 33.251) Manufactured Dwelling park Houseboat (See Chapter 33.236) Congregate Housing Facility (See 33.110.100.B.11) Attached Duplexes Multi-dwelling Development

RF Yes

R20 Yes

R10 Yes

R7 Yes

R5 Yes

R2.5 Yes

No

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

No No

Yes No

Yes No

Yes Yes

Yes Yes

Yes Yes

No

No

No

Yes

Yes

Yes

No

No

No

Yes

Yes

Yes

No

No

No

Yes

Yes

Yes

Yes No

Yes No

Yes No

Yes No

Yes No

Yes No

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Only in Planned Developments, See Chapter 33.270.

Only in Planned Developments, See Chapter 33.270.

Yes = allowed; No = prohibited.

33.110.202 When Primary Structures are Allowed A.

Purpose. The regulations of this section allow for development of primary structures on lots and lots of record that are an adequate size, but do not legitimize plots that were divided after subdivision and partitioning regulations were established. The regulations ensure that development on a site will in most cases be able to comply with all site development standards. The regulations also allow development of primary structures on lots that were large enough in the past, but were reduced by condemnation or required dedications for right-of-way.

B.

Adjustments. Adjustments to this section are prohibited.

C.

Primary structures allowed. Development of a primary structure is allowed as follows: 1.

On a lot created on or after July 26, 1979;

110-7

Chapter 33.110 Single-Dwelling Zones

Title 33, Planning and Zoning 8/1/21

2.

On a lot created through the Planned Development or Planned Unit Development process;

3.

On a lot, lot of record, lot remnant, or combinations thereof that did not abut a lot, lot of record, or lot remnant under the same ownership on July 26, 1979, and has not abutted a lot, lot of record, or lot remnant under the same ownership since July 26, 1979;

4.

On a lot or adjusted lot or combination thereof that either: a.

Meets the minimum lot size requirements stated in Table 110-3; or

b.

Does not meet the minimum lot size requirements stated in Table 110-3 but meets all of the following: (1) No portion of the lot, adjusted lot or combination is in an environmental protection, environmental conservation, or river environmental overlay zone; (2) No portion of the lot, adjusted lot or combination is in the special flood hazard area; and (3) The lot, adjusted lot or combination has an average slope of less than 25 percent;

5.

D.

On a lot of record or lot remnant or combination thereof that meets the minimum lot size requirements of Table 110-3.

Plots. Primary structures are prohibited on plots that are not lots, adjusted lots, lots of record, or lot remnants or tracts.

Table 110-3 Minimum Lot Size Requirements

RF through R5 Zones Lot 36 feet wide and meets the minimum lot area requirement of Adjusted Lot Table 610-2. [1, 2, 3, 4, 5] Lot Remnants Lot of Record R2.5 Zone Lot 1600 sq. ft. [1, 4] Adjusted Lot Lot Remnants Lots of Record Notes: [1] A primary structure is allowed on a lot or lot of record that did meet the requirements of Table 110-3 in the past but was reduced below the requirements solely because of condemnation or required dedication by a public agency for right-of-way.

[2] In the R5 zone, the minimum size requirements for adjusted lots and lot remnants approved through a property line adjustment under 33.677.300.A.4. or 33.677.300.C. are 36 ft. wide and 1,600 sq. ft.

110-8

Title 33, Planning and Zoning 8/1/21

Chapter 33.110 Single-Dwelling Zones

[3] In the R20 zone, a primary structure is allowed on a lot, lot of record, adjusted lot, lot remnant, or combination thereof that did meet the requirements of Table 110-3 in the past but no longer meets the requirements solely due to a zone change effective on May 24, 2018.

[4] A primary structure is allowed on a lot, lot of record, adjusted lot, lot remnant, or combination thereof that was separated from abutting lots through a lot confirmation that was finalized before September 11, 2020.

[5] Lot width for a flag lot is measured at the midpoint of the flag portion of the lot.

33.110.205 Minimum Dwelling Unit Density A.

Purpose. This standard promotes additional housing opportunities in areas of the city where services are available and restricts larger sites from being utilized for a single house.

B.

Minimum dwelling unit density.

1.

R7. In the R7 zone, a minimum of two dwelling units are required on sites that are 14,000 square feet or larger in total site area.

2.

R5. In the R5 zone, a minimum of two dwelling units are required on sites that are 10,000 square feet or larger in total site area.

3.

R2.5. In the R2.5 zone, a minimum of two dwelling units are required on sites that are 5,000 square feet or larger in total site area.

110-9

Chapter 33.110 Single-Dwelling Zones

Title 33, Planning and Zoning 8/1/21

Table 110-4 Summary of Development Standards In Single-Dwelling Zones Standard

RF

Maximum FAR - 1 total dwelling unit [1] - 2 total dwelling units [2] - 3 or more total dwelling units [1] (See 33.110.210 and 33.110.265) Maximum FAR with Bonus - 1 total dwelling unit - 2 total dwelling units [2] - 3 or more total dwelling units [1] (See 33.110.210 and 33.110.265) Maximum Height (See 33.110.215) Minimum Setbacks - Front building setback - Side building setback - Rear building setback - Garage entrance setback (See 33.110.220) Maximum Building Coverage (See 33.110.225) Required Outdoor Area - Minimum area

R20

no limit

NA

R10

no limit

no limit

NA

NA

R7

R5

R2.5

0.4 to 1 0.5 to 1 0.6 to 1 [3]

0.5 to 1 0.6 to 1 0.7 to 1 [3]

0.7 to 1 0.8 to 1 0.9 to 1 [3]

0.4 to 1 0.6 to 1 0.7 to 1

0.5 to 1 0.7 to 1 0.8 to 1

0.7 to 1 0.9 to 1 1 to 1

30 ft.

30 ft.

30 ft.

30 ft. [3]

30 ft. [3]

35 ft.

20 ft.

20 ft.

20 ft.

15 ft.

10 ft.

10 ft.

10 ft.

10 ft.

10 ft.

5 ft.

5 ft.

0/5 ft.

10 ft.

10 ft.

10 ft.

5 ft.

5 ft.

5 ft.

18 ft.

18 ft.

18 ft.

18 ft.

18 ft.

18 ft.

See Table 110-5

See Table 110-5

See Table 110-5

See Table 110-5

See Table 110-5

See Table 110-5

250 sq. ft.

250 sq. ft.

250 sq. ft.

250 sq. ft.

250 sq. ft.

12 ft. x 12 ft.

12 ft. x 12 ft.

200 sq. ft.

10 ft. x 10 ft.

- Minimum dimension 12 ft. x 12 ft. x 12 ft. x (See 33.110.240) 12 ft.

12 ft.

12 ft.

[1] Including any site with a congregate housing facility.

[2] Including accessory dwelling units.

[3] Additional FAR and height may be allowed. See 33.110.265.F.

33.110.210 Floor Area Ratios A.

Purpose. Floor area ratios (FAR) in the R7, R5 and R2.5 zones work with height, setback, and building coverage requirements to control the overall bulk and placement of buildings.

The maximum FAR allowances have been calibrated by zone to:

110-10

Title 33, Planning and Zoning 8/1/21

Chapter 33.110 Single-Dwelling Zones

•

Define the character of each zone by establishing greater FAR allowances in the higher intensity zones;

•

Encourage the provision of additional dwelling units within existing neighborhoods by relating the allowed amount of FAR to the total number of units on a site; and

•

Ensure that the bulk of buildings on one lot does not overwhelm development on adjacent lots.

B.

Maximum FAR. Maximum floor area ratios are stated in Table 110-4. The maximum FAR allowed is based on the total number of dwelling units on the site and whether a bonus option is chosen. The maximum FAR for a site with a congregate housing facility is the same as shown in Table 110-4 for a site with 1 total dwelling unit. The maximum FAR for institutional uses is stated in 33.110.270. Adjustments to the maximum FAR ratios, including bonus ratios, are prohibited.

C.

Exception. Maximum FAR does not apply to one alteration or addition of up to 250 square feet when the alteration or addition is to a primary structure that received final inspection at least 5 years ago. This exception is allowed once every 5 years.

D.

Maximum FAR with bonus.

1.

2.

Affordable housing bonus option. In the R7, R5 and R2.5 zones, the maximum FAR for sites that provide at least one dwelling unit to those earning no more than 80 percent of the area median family income is stated in Table 110-4. To qualify for this maximum FAR with bonus: a.

The applicant must provide a letter from the Portland Housing Bureau certifying that the development meets the affordability standard stated above. The letter is required to be submitted before a building permit can be issued but is not required in order to apply for a land use review; and

b.

The property owner must execute a covenant with the City that complies with the requirements of 33.700.060. The covenant must ensure that the affordable dwelling unit will remain affordable to households meeting the income restriction and any administrative requirements of the Portland Housing Bureau.

Preserving existing dwelling units bonus option. In the R7, R5 and R2.5 zones, the maximum FAR for sites that contain a primary residential structure that received final inspection at least 5 years ago is stated in Table 110-4. To qualify for this maximum FAR with bonus, no more than 25 percent of the existing street-facing façade of the primary residential structure may be altered to add additional floor area.

33.110.215 Height A.

Purpose. The height standards serve several purposes: • • •

They foster a reasonable building scale and relationship of one residence to another; They promote options for privacy for neighboring properties; and They reflect the general building scale and placement of houses in the city's single-dwelling neighborhoods.

110-11

Chapter 33.110 Single-Dwelling Zones

Title 33, Planning and Zoning 8/1/21

B.

Maximum height. The maximum height allowed is stated in Table 110-4. The maximum height standards for detached and connected accessory structures are stated in 33.110.245, Detached and Connected Accessory Structures. The maximum height standard for narrow lots is stated in 33.110.260, Additional Development Standards for Narrow Lots.

The maximum height standard for small flag lots is stated in 33.110.255, Additional Standards for Flag Lots. The maximum height standard for institutional uses is stated in 33.110.270, Institutional Development Standards.

C.

Exceptions to the maximum height.

1.

Chimneys, vents, flag poles, satellite receiving dishes and other similar items with a width, depth, or diameter of 3 feet or less may extend above the height limit, as long as they are attached to a building and do not exceed 5 feet above the top of the highest point of the roof. If they are greater than 3 feet in width, depth, or diameter, they are subject to the height limit.

2.

Dormers are not included in the height calculation when: a.

The roof of the dormer has a pitch of at least 3 in 12 and no part of the dormer extends above the ridgeline of the roof;

b.

The walls of the dormer are set back at least 12 inches from the plane of any exterior wall of the floor below; and

c.

The width of the dormer is not more than 75 percent of the width of the roof from which it projects. See Figure 110-1

3.

Farm buildings associated with an agricultural use, such as silos and barns are exempt from the height limit as long as they are set back from all lot lines, at least one foot for every foot in height.

4.

Antennas, utility power poles, and public safety facilities are exempt from the height limit.

5.

Small wind turbines are subject to the standards of Chapter 33.299, Wind Turbines.

6.

Roof mounted solar panels are not included in height calculations, and may exceed the maximum height limit as follows: a.

For flat roofs or the horizontal portion of mansard roofs, the roof mounted solar panel may extend up to 5 feet above the top of the highest point of the roof.

b.

For pitched, hipped or gambrel roofs, the roof mounted solar panel must be mounted no more than 12 inches from the surface of the roof at any point, and may not extend above the ridgeline of the roof. The 12 inches is measured from the upper side of the solar panel.

110-12

Title 33, Planning and Zoning 8/1/21

Chapter 33.110 Single-Dwelling Zones

Figure 110-1 Dormers

D.

Alternative height limits for steeply sloping lots.

1.

Downhill slope from street. On lots that slope downhill from the street with an average slope of 20 percent or greater, the height limit is the higher of either 23 feet above the average of the grade of the street or the normal height limit calculated as stated in Chapter 33.930, Measurements. In addition, the alternative height and setback standards of Subsection 33.110.220.D apply. For the purpose of this paragraph, the average grade of the street is measured at the street lot line property corners.

2.

Uphill slope from the street. On lots that slope uphill from the street with an average slope of 20 percent or greater the alternative height and setback standards of Subsection 33.110.220.D apply.

3.

Downhill and uphill slope from the street. On lots that slope uphill from one street and downhill from another street with an average slope of 20 percent or greater, the applicant may meet the alternative height limit of Paragraph D.1.

33.110.220 Setbacks A.

Purpose. The setback regulations for buildings and garage entrances serve several purposes: • • • • •

They maintain light, air, separation for fire protection, and access for fire fighting; They reflect the general building scale and placement of residences in the city's singledwelling neighborhoods; They foster a reasonable physical relationship between residences; They promote options for privacy for neighboring properties; They require larger front setbacks than side and rear setbacks to promote open, visually pleasing front yards;

110-13

Chapter 33.110 Single-Dwelling Zones •

•

Title 33, Planning and Zoning 8/1/21

They provide adequate flexibility to site a building so that it may be compatible with the neighborhood, fit the topography of the site, allow for required outdoor areas, and allow for architectural diversity; and They provide room for a car to park in front of a garage door without overhanging the street or sidewalk, and they enhance driver visibility when backing onto the street.

B.

Required setbacks. The required setbacks for buildings and garage entrances are stated in Table 110-4. The walls of the garage structure are subject to the front, side, and rear building setbacks stated in Table 110-4. The minimum setbacks for institutional uses are stated in 33.110.270, Institutional Development Standards. Other setbacks may apply to specific types of development or situations.

C.

Extensions into required building setbacks.

1.

The following features of a building may extend into a required building setback up to 20 percent of the depth of the setback. However, the feature must be at least three feet from a lot line: a.

Chimneys, fireplace inserts and vents, mechanical equipment, and fire escapes;

b.

Water collection cisterns and stormwater planters that do not meet the standard of Paragraph C.3;

c.

Decks, stairways, wheelchair ramps and uncovered balconies that do not meet the standards of Paragraph C.3; and

d.

Bays and bay windows that meet the following requirements: (1) Each bay and bay window may be up to 12 feet long, but the total area of all bays and bay windows on a building facade cannot be more than 30 percent of the area of the facade; (2) At least 30 percent of the area of each bay which faces the property line requiring the setback must be glazing or glass block; and (3) Bays and bay windows must cantilever beyond the foundation of the building.

2.

Building eaves may extend up to 2 feet into a required building setback provided the eave is at least three feet from a lot line.

3.

The following minor features of a building may extend into the entire required building setbacks: a.

Utility connections attached to the building that are required to provide services such as water, electricity, and other similar utility services;

b.

Gutters and downspouts that drain stormwater off a roof of the structure;

c.

Stormwater planters that are no more than 2-1/2 feet above the ground;

d.

Water collection cisterns that are 6 feet or less in height;

110-14

Title 33, Planning and Zoning 8/1/21

4.

D.

Chapter 33.110 Single-Dwelling Zones

e.

Decks, stairs and ramps that are no more than 2-1/2 feet above the ground.

However, stairways and wheelchair ramps that lead to one entrance on the street-facing façade of a building are allowed to extend into the required setback from a street lot line regardless of height above ground; and

f.

On lots that slope down from the street, vehicular or pedestrian entry bridges that are no more than 2-1/2 feet above the average sidewalk elevation.

Detached accessory structures. The setback standards for detached accessory structures, including detached mechanical equipment, are stated in 33.110.245.

Fences are addressed in 33.110.275. Detached accessory dwelling units are addressed in Chapter 33.205.

Exceptions to the required setbacks.

1.

Setback averaging. The front building setback, and the setback of decks, balconies, and porches may be reduced to the average of the respective setbacks on the abutting lots. See Chapter 33.930, Measurements, for more information.

2.

Flag lots. The lot in front of a flag lot may reduce its side building setback along the flag pole lot line to zero. All other setback requirements remain the same.

3.

Environmental zone. The front building and garage entrance setback may be reduced to zero where any portion of the site is in an environmental overlay zone. Where a side lot line is also a street lot line the side building and garage entrance setback may be reduced to zero. All other provisions of this Title apply to the building and garage entrance.

4.

Steeply sloping lots. This provision applies to lots that slope up or down from the street with an average slope of 20 percent or greater. See Chapter 33.930, Measurements, for more information on how to measure average slope.

5.

a.

In the RF, R20, R10, and R7 zones, the front building setback for the dwelling may be reduced to 10 feet. However, the height limitations of subparagraph c. below apply. See Figures 110-2 and 110-3.

b.

In all single-dwelling residential zones, the front building setback for the garage wall and/or the garage entrance setback may be reduced to five feet. However, the height limitations of Paragraph D.4.c. apply. See Figures 110-2 and 110-3.

c.

Height limitation. The height limit in the area of the reduced setback is lowered one foot for every foot of reduced setback. See Figures 110-2 and 110-3.

Established building lines. The front, side, or rear building setback for the primary structure may be reduced for sites with existing nonconforming development in a required setback. The reduction is allowed if the width of the portion of the existing wall of the primary structure within the required setback is at least 60 percent of the width of the respective facade of the existing primary structure. The building line created by the nonconforming wall serves as the reduced setback line. Eaves associated with the nonconforming wall may extend the same distance into the reduced setback as the existing eave. However, side or rear setbacks may not be reduced to less than 3 feet in depth and eaves may not project closer than 2 feet to

110-15

Chapter 33.110 Single-Dwelling Zones

Title 33, Planning and Zoning 8/1/21

the side or rear property line. See Figure 110-4. This reduced setback applies to alterations that are no higher than the existing nonconforming wall. For example, a second story could not be placed up to the reduced setback line if the existing nonconforming wall is only one story high.

6.

Split zoning. No setbacks are required from an internal lot line that is also a zoning line on sites with split zoning.

7.

Land divisions and Planned Developments with existing development. The following setback reductions are allowed when proposed as part of a land division or Planned Development: a.

The minimum setback between an existing building and a side lot line along a proposed right-of-way dedication or street tract may be reduced to three feet;

b.

When a dedication of public right-of-way along the frontage of an existing street is required as part of a land division or Planned Development, the minimum front or side setback between an existing building and a lot line that abuts the right-ofway may be reduced to zero. Future additions or development must meet required minimum setbacks.

c.

Eaves on an existing building may extend one foot into the reduced setback allowed by D.7.a. or b., except they may not extend into the right-of-way.

8.

Required dedication. When a dedication of public right-of-way along the frontage of an existing street is required by a public agency, the minimum front or side setback between an existing building and a lot line that abuts the right-of-way may be reduced to zero. Future additions or development must meet required minimum setbacks.

Eaves on an existing building may extend one foot into the reduced setback except they may not extend into the right-of-way.

9.

Alley. No side, rear, or garage entrance setback is required from a lot line abutting an alley.

110-16

Title 33, Planning and Zoning 8/1/21

Chapter 33.110 Single-Dwelling Zones

Figure 110-2 Exceptions To Front Building Setback And Garage Entrance Setback—Downhill

Figure 110-3 Exceptions To Front Building Setback And Garage Entrance Setback—Uphill

110-17

Chapter 33.110 Single-Dwelling Zones

Title 33, Planning and Zoning 8/1/21

Figure 110-4 Established Building Lines

33.110.225 Building Coverage A.

Purpose. The building coverage standards limit the footprint of buildings and work together with the height, setback, and floor area ratio standards to control the overall bulk of structures. They are intended to ensure that taller buildings will not have such a large footprint that their total bulk will overwhelm adjacent houses. Additionally, the standards help define the character of the different zones by limiting the amount of buildings allowed on a site.

B.

Building coverage standards. The maximum combined building coverage allowed on a site for all covered structures is stated in Table 110-5.

110-18

Title 33, Planning and Zoning 8/1/21

Chapter 33.110 Single-Dwelling Zones

Table 110-5 Maximum Building Coverage Allowed in the RF through R2.5 Zones [1]

Lot Size Less than 3,000 sq. ft.

3,000 sq. ft or more but less than 5,000 sq. ft.

5,000 sq. ft. or more but less than 20,000 sq. ft.

20,000 sq. ft. or more

Maximum Building Coverage 50% of lot area 1,500 sq. ft. + 37.5% of lot area over 3,000 sq. ft.

2,250 sq. ft + 15% of lot area over 5,000 sq. ft.

4,500 sq. ft. + 7.5% of lot area over 20,000 sq. ft.

33.110.227 Trees Requirements for street trees and for on-site tree preservation, protection, and overall tree density are specified in Title 11, Trees. See Chapter 11.50, Trees in Development Situations.

33.110.230 Main Entrances A.

Purpose. These standards: • • • •

B.

C.

Work with the street-facing facade and garage standards to ensure that there is a physical and visual connection between the living area of the residence and the street; Enhance public safety for residents and visitors and provide opportunities for community interaction; Ensure that the pedestrian entrance is visible or clearly identifiable from the street by its orientation or articulation; and Ensure a connection to the public realm for development on lots fronting both private and public streets by making the pedestrian entrance visible or clearly identifiable from the public street.

Where these standards apply.

1.

The standards of this section apply to all residential structure types except accessory dwelling units in the R10 through R2.5 zones;

2.

Where a proposal is for an alteration or addition to existing development, the standards of this section apply only to the portion being altered or added;

3.

On sites with frontage on both a private street and a public street, the standards apply to the site frontage on the public street. On all other sites with more than one street frontage, the applicant may choose on which frontage to meet the standards;

4.

Development on flag lots or on lots that slope up or down from the street with an average slope of 20 percent or more is exempt from these standards;

5.

Subdivisions and PUDs that received preliminary plan approval between September 9, 1990, and September 9, 1995, are exempt from these standards; and

6.

Development on lots where any portion of the lot is in the special flood hazard area is exempt from the standard in Subsection D.

Location. At least one main entrance for each structure must:

110-19

Chapter 33.110 Single-Dwelling Zones

Title 33, Planning and Zoning 8/1/21

1.

Be within 8 feet of the longest street-facing wall of the dwelling unit; and

2.

Either: a.

Face the street. See Figure 110-5;

b.

Be at an angle of up to 45 degrees from the street; or

c.

Open onto a porch. See Figure 110-6. The porch must: (1) Be at least 25 square feet in area; (2) Have at least one entrance facing the street; and (3) Have a roof that is: • No more than 12 feet above the floor of the porch; and • At least 30 percent solid. This standard may be met by having 30 percent of the porch area covered with a solid roof, or by having the entire area covered with a trellis or other open material if no more than 70 percent of the area of the material is open.

D.

Distance from grade. The main entrance that meets Subsection C must be within 4 feet of grade. For the purposes of this Subsection, grade is the average grade measured at the outer most corners of the street facing façade. See Figure 110-7.

Figure 110-5 Main Entrance Facing the Street

110-20

Title 33, Planning and Zoning 8/1/21

Chapter 33.110 Single-Dwelling Zones Figure 110-6 Main Entrance Opening onto a Porch

Figure 110-7 Calculation of Grade: (Grade A + Grade B) / 2

33.110.235 Street-Facing Facades A.

Purpose. The standards: • • •

Work with the main entrance and garage standards to ensures that there is a visual connection between the living area of the residence and the street; Enhance public safety by allowing people to survey their neighborhood from inside their residences; and Provide a pleasant pedestrian environment along the street by preventing large expanses of blank facades and façade-obscuring staircases from interrupting the connection between the residence and the public realm.

110-21

Chapter 33.110 Single-Dwelling Zones B.

Title 33, Planning and Zoning 8/1/21

Where the standards apply.

1.

The street-facing façade standards apply to all residential structure types except accessory dwelling units in the R10 through R2.5 zones;

2.

Where a proposal is for an alteration or addition to existing development, the applicant may choose to apply the standard either to the portion being altered or added, or to the entire street-facing facade;

3.

Development on flag lots or on lots that slope up or down from the street with an average slope of 20 percent or more is exempt from this standard; and

4.

Subdivisions and PUDs that received preliminary plan approval between September 9, 1990, and September 9, 1995, are exempt from these standards.

C.

Windows. At least 15 percent of the area of each facade that faces a street lot line must be windows or main entrance doors. Windows used to meet this standard must allow views from the building to the street. Glass block does not meet this standard. Windows in garage doors do not count toward meeting this standard, but windows in garage walls do count toward meeting this standard. To count toward meeting this standard, a door must be at the main entrance and facing a street lot line.

D.

Exterior stairs. Fire escapes and exterior stairs providing access to an upper level are not allowed on any facade that faces a street lot line.

33.110.240 Required Outdoor Areas A.

Purpose. The required outdoor areas standards ensure opportunities in the single-dwelling zones for outdoor relaxation or recreation. The standards work with the maximum building coverage standards to ensure that some of the land not covered by buildings is of an adequate size and shape to be usable for outdoor recreation or relaxation. The location requirements provide options for private or semiprivate areas. The requirement of a required outdoor area serves in lieu of a large rear setback requirement and is an important aspect in addressing the livability of a residential structure.

B.

Required outdoor area sizes. The minimum sizes of required outdoor area per lot is stated in Table 110-4. The shape of the outdoor area must be such that a square of the stated dimension will fit entirely in the outdoor area.

C.

Requirements.

1.

The required outdoor area must be a contiguous area and may be on the ground or above ground.

2.

The area must be surfaced with lawn, pavers, decking, or sport court paving which allows the area to be used for recreational purposes. User amenities, such as tables, benches, trees, planter boxes, garden plots, drinking fountains, spas, or pools may be placed in the outdoor area. It may be covered, such as a covered patio, but it may not be fully enclosed. Required outdoor area may not be used as vehicle area.

3.

General landscaped areas that are included as part of the required outdoor area may extend into the required side and rear building setback, but the required outdoor area may not be located in the front building setback.

110-22

Title 33, Planning and Zoning 8/1/21

Chapter 33.110 Single-Dwelling Zones

33.110.245 Detached and Connected Accessory Structures A.

Purpose. This section regulates detached and connected structures that are incidental to primary buildings to prevent them from becoming the predominant element of the site.

The standards limit the height and bulk of these structures, promote compatibility of design for larger structures, provide for necessary access around larger structures, help maintain privacy between abutting lots, and maintain open front setbacks.

B.

General standards.

C.

1.

The regulations of this section apply to detached accessory structures and connected accessory structures. Farm structures associated with an agricultural use such as barns and silos are exempt from these standards as long as they are set back from all lot lines at least one foot for every foot in height. Additional regulations for accessory dwelling units are stated in Chapter 33.205.

2.

Detached accessory structures are allowed on a lot only in conjunction with a primary building and may not exist on a lot prior to the construction of the primary structure, except as allowed by Paragraph B.3.

3.

A detached accessory structure that becomes the only structure on a lot as the result of a land division, a property line adjustment, a lot confirmation, or a demolition of the primary structure may remain on the lot if the owner has executed a covenant with the City that meets the requirements of Section 33.700.060. a.

For a land division, the covenant must require the owner to remove the accessory structure if, within two years of final plat approval, a primary structure has not been built and received final inspection. The covenant must be executed with the City prior to final plat approval.

b.

For a property line adjustment or a lot confirmation, the covenant must require the owner to remove the accessory structure if a primary structure has not been built and received final inspection within two years. The two years begins on the date the letter from BDS approving the property line adjustment or lot confirmation is mailed. The covenant must be executed with the City before the final letter from BDS is issued.

c.

For a demolition of a primary structure, the covenant must require the owner to remove the accessory structure if a new primary structure has not been built and received final inspection within two years. The two years begins on the date of the final inspection of the demolition. The covenant must be executed with the City prior to the issuance of the demolition permit.

Detached and connected covered accessory structures. The following standards apply to all detached covered accessory structures and connected covered accessory structures.

Detached covered accessory structures are items such as garages, carports, greenhouses, artist’s studios, guest houses, accessory dwelling units, storage buildings, wood sheds, water collection cisterns, and covered decks or patios that are not connected to the primary structure. Connected covered accessory structures include accessory structures that are connected to a primary structure via a roofed structure such as a breezeway. The standards of this subsection do not apply to the portion of the structure that connects the

110-23

Chapter 33.110 Single-Dwelling Zones

Title 33, Planning and Zoning 8/1/21

accessory structure to the primary structure. Garages are also subject to the standards of 33.110.250.

1.

Height. The maximum height allowed for all detached covered accessory structures and connected covered accessory structures is 20 feet.

2.

Setbacks. Except as follows, detached covered accessory structures and connected covered accessory structures are subject to required building setbacks. See the additional regulations for garages in 33.110.250. a.

Water collection cisterns that are 6 feet or less in height are allowed in required side and rear setbacks.

b.

In the R7, R5 and R2.5 zones, detached covered accessory structures other than water collection cisterns, are allowed in required side and rear building setbacks if all of the following are met: (1) The structure is at least 40 feet from a front lot line, and if on a corner lot, is at least 20 feet from a side street lot line; (2) The structure’s footprint has dimensions that do not exceed 24 feet by 24 feet, excluding eaves; (3) If more than one structure is within the setback, the combined length of all structures in the setback adjacent to each property line is no more than 24 feet; (4) The structure is no more than 15 feet high, and the walls of the structure are no more than 10 feet high, excluding the portion of the wall within a gable; (5) The portion of the structure within the setback must be screened from adjoining lots by a fence or landscaping, unless it is enclosed within the setback by a wall. Screening is not required for enclosed structures.

Screening must comply with the L3 or F2 standards of Chapter 33.248, Landscaping and Screening; (6) Walls located within the setback do not have doors or windows facing the adjacent lot line; (7) The structure does not have a rooftop deck; and (8) Dormers are set back at least 5 feet from the side and rear lot lines that abut another lot.

3.

Building coverage. The following additional building coverage standards apply to detached covered accessory structures and connected covered accessory structures: a.

The combined building coverage of all detached and connected covered accessory structures may not exceed 15 percent of the total area of the site; and

b.

The building coverage of a detached covered accessory structure may not be greater than the building coverage of the primary structure, and the building

110-24

Title 33, Planning and Zoning 8/1/21

Chapter 33.110 Single-Dwelling Zones

coverage of a connected covered accessory structure may not be greater than the building coverage of the primary structure.

4.

Additional development standards. The following additional standards apply to detached covered accessory structures and connected covered accessory structures that are more than 15 feet high. Additions to existing structures that do not meet a standard are exempt from that standard. a.

Exterior finish materials. The exterior finish materials must meet one of the following: (1) The exterior finish material must be the same in type, size and placement as the exterior finish material of the primary structure; or (2) Siding must be made from wood, composite boards, vinyl or aluminum products, and the siding must be composed in a shingle pattern, or in a horizontal clapboard or shiplap pattern. The boards in the pattern must be 6 inches or less in width.

b.

Roof Pitch. The pitch of the roof with the highest ridgeline must meet one of the following: (1) The pitch of the roof with the highest ridgeline must be the same as the pitch of the roof with the highest ridgeline of the primary structure; or (2) The pitch of the roof with the highest ridgeline must be at least 6/12.

c.

Trim. The trim must meet one of the following: (1) The trim must be the same in type, size, and location as the trim used on the primary structure; or (2) The trim around all windows and doors must be at least 3 ½ inches wide.

d.

Windows. The windows on all street facing facades must meet one of the following: (1) The windows must match those on the street facing façade of the primary structure in orientation (horizontal or vertical); or (2) Each window must be square or vertical – at least as tall as it is wide.

e.

Eaves. The eaves must meet one of the following: (1) The eaves must project from the building walls the same distance as the eaves on the primary structure; (2) The eaves must project from the building walls at least 1 foot on all elevations; or (3) If the primary structure has no eaves, no eaves are required.

D.

Detached uncovered vertical structures. Detached uncovered vertical structures are items such as flag poles, trellises, arbors and other garden structures, play structures, antennas, 110-25

Chapter 33.110 Single-Dwelling Zones

Title 33, Planning and Zoning 8/1/21

satellite receiving dishes, and lamp posts. The following standards apply to detached uncovered vertical structures. Fences are addressed in 33.110.275: 1.

2.

Height. Except as follows, the maximum height allowed for all detached uncovered vertical structures is 20 feet: a.

Antennas, utility power poles, and public safety facilities are exempt from the height limit.

b.

Flagpoles are subject to the height limit of the base zone for primary structures.

c.

Detached small wind turbines are subject to the standards of 33.299, Wind Turbines.

Setbacks. Except as follows, detached uncovered vertical structures are subject to required building setbacks: a.

Detached uncovered vertical structures that are no larger than 3 feet in width, depth, or diameter and no taller than 8 feet are allowed in required building setbacks.

b.

A single arbor structure that is up to 6 feet wide, up to 3 feet deep, and up to 8 feet tall is allowed in the front setback. The arbor must allow for pedestrian access under its span.

c.

Flagpoles are allowed in required building setbacks.

d.

In the R7, R5, and R2.5 zones, detached uncovered vertical structures that exceed the allowances of Subparagraph 2.a are allowed in side and rear setbacks if all of the following are met: (1) The structure is at least 40 feet from a front lot line, and if on a corner lot, at least 20 feet from a side street lot line; (2) The structure’s footprint has dimensions that do not exceed 24 feet by 24 feet; (3) The structure is no more than 10 feet high; (4) The portion of the structure within the setback must be screened from adjoining lots by a fence or landscaping, unless it is enclosed within the setback by a wall. Screening is not required for enclosed structures.

Screening must comply with the L3 or F2 standards of Chapter 33.248, Landscaping and Screening; and (5) The structure does not have a rooftop deck.

E.

Detached uncovered horizontal structures. Uncovered horizontal structures are items such as decks, stairways, swimming pools, hot tubs, tennis courts, and boat docks not covered or enclosed. The following standards apply to detached uncovered horizontal structures.

1.

Height. The maximum height allowed for all detached uncovered horizontal structures is 20 feet.

110-26

Title 33, Planning and Zoning 8/1/21 2.

F.

Chapter 33.110 Single-Dwelling Zones

Setbacks. Except as follows, detached uncovered horizontal structures are subject to required buildings setbacks: a.

Detached uncovered decks, ramps, and stairways that are more than 2-1/2 feet above the ground may extend into a required building setback up to 20 percent of the depth of the setback. However, the deck or stairway must be at least three feet from a lot line.

b.

Structures that are no more than 2-1/2 feet above the ground are allowed in required building setbacks.

Detached mechanical equipment. Detached mechanical equipment includes items such as heat pumps, air conditioners, emergency generators, radon mitigation components, and water pumps. Generally, detached mechanical equipment will not be attached to a building but may have components such as ventilation or electrical systems attached to the primary structure. The following standards apply to detached mechanical equipment: 1.

Height. The maximum height allowed for all detached mechanical equipment is 20 feet.

2.

Setbacks. Except as follows, detached mechanical equipment is subject to required buildings setbacks. Detached mechanical equipment is allowed in side or rear building setbacks if all of the following are met: a.

The equipment is no more than 5 feet high; and

b.

The equipment is screened from adjoining lots by walls, fences or vegetation. Screening must comply with the L3 or F2 standards of Chapter 33.248, Landscaping and Screening.

33.110.250 Additional Development Standards for Garages A.

Purpose. These standards: • • • • •

B.

Together with the window and main entrance standards, ensure that there is a physical and visual connection between the living area of the residence and the street; Ensure that the location and amount of the living area of the residence, as seen from the street, is more prominent than the garage; Prevent garages from obscuring the main entrance from the street and ensure that the main entrance for pedestrians, rather than automobiles, is the prominent entrance; Provide for a more pleasant pedestrian environment by preventing garages and vehicle areas from dominating the views of the neighborhood from the sidewalk; and Enhance public safety by preventing garages from blocking views of the street from inside the residence.

Existing detached garages.

1.

Rebuilding. A detached garage that is nonconforming due to its location in a setback, may be rebuilt on the footprint of the existing foundation, if the garage was originally constructed legally. In this case, the rebuilt garage may be no more than 15 feet high, and the garage walls may be no more than 10 feet high, excluding the portion of the

110-27

Chapter 33.110 Single-Dwelling Zones

Title 33, Planning and Zoning 8/1/21

wall within a gable. Decks are not allowed on the roof of the garage. The rebuilt garage is not required to comply with other standards of this chapter.

2.

C.

Additions. An addition may be made to an existing or rebuilt detached garage that is nonconforming due to its location in a setback as follows: a.

The expanded garage complies with all other standards of this chapter; or

b.

The combined size of the existing foundation and the addition is no larger than 12 feet wide by 20 feet deep. In this case, the garage may be no more than 15 feet high, and the walls of the addition may be no more than 10 feet high, excluding the portion of the wall within a gable. Decks are not allowed on the roof of the garage. The expanded garage is not required to comply with other standards of this chapter.

Length of street-facing garage wall.

1.

Where these regulations apply. Unless exempted by Paragraph C.2, the regulations of this subsection apply to garages in the R10 through R2.5 zones.

2.

Exemptions.

3.

a.

Development on flag lots, and development on lots that slope up or down from the street with an average slope of 20 percent or more are exempt from the standards of this subsection.

b.

Subdivisions and PUDs that received Preliminary Plan approval between September 9, 1990, and September 9, 1995, are exempt from the standards of this subsection.

c.

On corner lots, only the street-facing garage wall that contains the garage door must meet the standards of this subsection.

Standards. a.

Garages that are accessory to houses. For garages that are accessory to houses and manufactured homes, the length of the garage wall facing the street may be up to 50 percent of the length of the street-facing building façade. See Figure 110-8. Where the street-facing facade is less than 22 feet long, an attached garage is not allowed as part of that façade.

b.

Garages that are accessory to attached houses. The following standards apply to garages that are accessory to attached houses: (1) The length of the garage wall facing the street may be up to 50 percent of the length of the street facing building façade. See Figure 110-8. When all the units are 22 feet wide or wider, the standard applies to the street-facing façade of each unit. In all other situations, the standard applies to the total length of the street-facing facades; and (2) When the attached house structure is made up of more than three attached houses and at least one attached house is less than 22 feet wide, at least 50 percent of the total length of the street-facing facades must be without

110-28

Title 33, Planning and Zoning 8/1/21

Chapter 33.110 Single-Dwelling Zones

garage, and the 50 percent length without garage must be contiguous. See Figure 110-9. c.

Garages that are accessory to duplexes, triplexes, and fourplexes. The following standards apply to garages that are accessory to duplexes, triplexes, and fourplexes: (1) The length of the garage wall facing the street may be up to 50 percent of the total length of the street-facing building façades. See Figure 110-8.

Where the total length of the street-facing facades is less than 22 feet long, an attached garage is not allowed; and (2) For a fourplex, at least 50 percent of the total length of the street-facing building facades must be without garage, and the 50 percent length without garage must be contiguous. See Figure 110-9.

D.

Street lot line setbacks.

1.

Where this standard applies. The standard of this paragraph applies to garages in the R10 through R2.5 zones. Where a proposal is for an alteration or addition to existing development, the standard applies only to the portion being altered or added.

2.

Exemptions. a.

Development on flag lots or on lots that slope up or down from the street with an average slope of 20 percent or more are exempt from this standard.

b.

Subdivisions and PUDs that received preliminary plan approval between September 9, 1990, and September 9, 1995, are exempt from this standard.

c.

Where a lot has more than one street lot line, and there is an existing dwelling unit on the lot, this standard must be met only on the street-facing facade on which the main entrance is located.

3.

Standard. A garage wall that faces a street may be no closer to the street lot line than the longest street-facing wall of the dwelling unit. See Figure 110-10.

4.

Exception. A street-facing garage wall may be up to 6 feet in front of the longest street-facing wall of the dwelling unit, if: a.

The street-facing garage wall is 40 percent or less of the length of the building facade; and

b.

There is a porch at the main entrance. The garage wall may not be closer to the street lot line than the front of the porch. See Figure 110-11. The porch must meet the following: (1) The porch must be at least 48 square feet in area and have minimum dimensions of 6 feet by 6 feet; (2) The porch must have a solid roof; and (3) The roof may not be more than 12 feet above the floor of the porch.

110-29

Chapter 33.110 Single-Dwelling Zones

Title 33, Planning and Zoning 8/1/21 Figure 110-8 Length of Street-Facing Garage Wall

110-30

Title 33, Planning and Zoning 8/1/21

Chapter 33.110 Single-Dwelling Zones

Figure 110-9 Combined Length of Street-Facing Garage Wall

Figure 110-10 Street Lot Line Setback

110-31

Chapter 33.110 Single-Dwelling Zones

Title 33, Planning and Zoning 8/1/21

Figure 110-11 Garage Front Setback Exception

33.110.255 Additional Development Standards for Flag Lots A.

Purpose. Flag lots encourage additional housing opportunities in a land efficient manner that allows existing homes to be retained. The standards in this section are intended to: • •

B.

Protect privacy between the flag lots and abutting residences; and Increase the compatibility of structures on small flag lots.

Flag lot standards.

1.

Large flag lots. The following standards apply to flag lots that are 3,000 square feet or more in area. Only the area of the flag portion of the flag lot is included when calculating area. The pole portion of the flag lot is not included. See Figure 110-11: a.

Setbacks. Large flag lots have required building setbacks that are the same along all lot lines. The required setbacks are: Zone RF, R20, R10 R7, R5, R2.5

b.

Setback 15 feet 10 feet

Landscaped buffer area. A landscaped area is required around the perimeter of a flag lot that is 10,000 square feet or less in area to buffer the flag portion from surrounding lots. The pole portion of the flag lot is not included when calculating area, and the pole and the lot lines that are internal to the original land division site, or are adjacent to an alley, are exempt from the landscaped area requirement. The landscaped area must be at least 5 feet deep and must be landscaped to at least the L3 standard. Landscaping is not required within the first 10 feet from the point at which the pole portion meets the flag portion of the lot. See Figure 110-12;

110-32

Title 33, Planning and Zoning 8/1/21

Chapter 33.110 Single-Dwelling Zones

c.

Building coverage. Only the area of the flag portion of the flag lot is included when calculating building coverage. The area of the pole portion of the lot is not included;

d.

Required outdoor area. The required outdoor area may not extend into the required landscaped buffer area required by Subparagraph B.1.b.; and

e.

Detached and connected accessory structures. Detached and connected accessory structures may project into the flag lot setbacks as allowed by 33.110.245, Detached and Connected Accessory Structures. However, these structures may not extend into the landscaped buffer area required by Subparagraph B.1.b.

Figure 110-12 Flag Lot Description and Buffer

110-33

Chapter 33.110 Single-Dwelling Zones 2.

Title 33, Planning and Zoning 8/1/21

Small flag lots. The following standards apply to flag lots where the flag portion of the lot is less than 3,000 square feet in area: a.

Setbacks. Small flag lots have a 5 foot required building setback along all lot lines;

b.

Building coverage. Only the area of the flag portion of the flag lot is included when calculating building coverage. The area of the pole portion of the lot is not included;

c.

Maximum FAR. In the RF through R5 zones, the maximum floor area ratio allowed on a small flag lot is 0.5 to 1.

d.

Maximum height. In the RF through R5 zones, the maximum height allowed for all structures is 20 feet.

e.

Design standards. In the RF through R5 zones, the following design standards apply to structures that are more than 15 feet high: (1) The exterior finish material must be the same in type, size and placement as the exterior finish material on the primary structure on the lot in front of the flag lot, or be made from brick, stucco, wood, composite boards, vinyl or aluminum. Wood, composite boards, vinyl or aluminum siding must be arranged in a shingle, horizontal clapboard, or shiplap pattern. The boards in the pattern must be 6 inches or less in width.

(2) The pitch of the roof with the highest ridgeline must be the same as the pitch of the roof with the highest ridgeline of the primary structure on the lot in front of the small flag lot or be at least 6/12.

(3) The trim around all windows and doors must be the same as the window and door trim on the primary structure on the lot in front of the flag lot or be at least 3-1/2 inches wide.

(4) The eaves must project the same as the eaves on the primary structure on the lot in front of the flag lot, or project from the building walls at least 1 foot on all elevations.

33.110.260 Additional Development Standards for Narrow Lots A.

Purpose. These standards increase the compatibility of residential structures on narrow lots by: • • •

B.

Ensuring a reasonably proportional relationship between the width and height of structures on narrow lots; Promoting wider front facades by requiring two attached houses on very narrow lots; Promoting open landscaped front yards.

Where these regulations apply. The following additional development standards apply to lots, lots of record, and combinations of lots or lots of record that are less than 32 feet wide in the R20 through R2.5 zones. Lots in planned unit developments are exempt from the additional standards.

110-34

Title 33, Planning and Zoning 8/1/21 C.

Chapter 33.110 Single-Dwelling Zones

Standards.

1.

Required housing type. Attached houses are required on lots and lots of record that are less than 26 feet wide. Attached houses are not required on sites that contain a combination of lots or lots of record when the combination is at least 26 feet wide.

Attached houses are also not required when there are primary structures on all of the adjacent sites that share a side lot line with the development site. See 33.110.265.C. for development standards that apply to attached houses.

2.

Floor Area Ratio. The maximum floor area ratio for attached houses in the R5 zone on lots less than 3,200 square feet is 0.6 to 1.

3.

Maximum height. The maximum height allowed for all primary structures is 1.5 times the width of the structure, up to the maximum height limit listed in Table 110-4.

Attached houses are exempt from this standard. For the purposes of this Paragraph, width is the length of the street-facing façade of the structure. See Figure 110-13.

Figure 110-13 Width of Street-Facing Facade

4.

Landscaping. a.

All street-facing facades must have landscaping along the foundation. There must be at least one three-gallon shrub for every 3 lineal feet of foundation; and

b.

Sixty percent of the area between the front lot line and the front building line must be landscaped. At a minimum, the required landscaped area must be planted with ground cover. Up to one-third of the required landscaped area may be for recreational use or for use by pedestrians. Examples include walkways, play areas, and patios.

110-35

Chapter 33.110 Single-Dwelling Zones

Title 33, Planning and Zoning 8/1/21

33.110.265 Residential infill options A.

Purpose. The residential infill options allow for a variety of residential housing types in a manner that maintains the overall character of single-dwelling neighborhoods. These options have several public benefits: • • • •

They promote housing types that accommodate households of varying sizes and income levels; They promote energy-efficient development; They provide for a more efficient use of residential land; and They promote better site layout and opportunities for private recreational areas.

B.

General requirements for all residential infill options. The residential infill options listed in this section are allowed by right unless specifically stated otherwise. The project must comply with the applicable development standards of this section.

C.

Attached housing. Attached housing allows for more efficient use of land and for energyconserving housing.

1.

R20 through R5 zones. Attached houses are allowed as follows: a.

Lot dimensions.

(1) Interior (noncorner) lots. Each attached house must be on a lot that complies with Section 33.110.202, When Primary Structures are Allowed.

(2) Corner lots. The original lot must comply with Section 33.110.202, Development on Lots and Lots of Record, and the new lots for attached houses must either meet the minimum lot dimension standard stated in Chapter 33.611, Lots in the R2.5 Zone, or must have been created through a Property Line Adjustment. Adjustments are prohibited

b.

Number of attached houses. Two attached houses may have a common wall.

Structures made up of three or more attached houses are prohibited unless approved as a Planned Development.

c.

Building setbacks. The required building setback on the side containing the common wall is reduced to zero. The reduced setback applies to all buildings on the lot and extends along the full length of the lot line that contains the common or abutting wall.

d.

Development standards. Both attached houses must meet the following standards to ensure that the two units have compatible elements: (1) Height. The height of the two units must be within four feet of each other; and (2) On both units: •

Exterior finish materials. The exterior finish material must be the same in type, size and placement.

•

Roof pitch. The roof pitch must be the same.

110-36

Title 33, Planning and Zoning 8/1/21

2.

D.

Chapter 33.110 Single-Dwelling Zones

•

Eaves. Roof eaves must project the same distance from the building wall.

•

Trim. Trim must be the same in type, size and location.

•

Windows. Windows must match in proportion and orientation.

R2.5 zone. Attached houses are allowed as follows: a.

Density and lot dimensions. Each attached house must be on a lot that meets the density and minimum lot dimensions stated in Chapter 33.611, Lots in the R2.5 Zone.

b.

Number of attached houses. Up to eight attached houses may have common walls. Structures made up of nine or more attached houses are prohibited.

c.

Building setbacks. The required building setback on the side containing the common wall is reduced to zero. The reduced setback extends along the full length of the lot line that contains the common or abutting wall.

d.

Building coverage. The maximum building coverage of the base zone applies to the entire attached housing project, however the building coverage per lot may not exceed 5 percent more than the base zone maximum.

e.

Floor area. The maximum floor area ratio may be applied to the entire attached housing project, however the floor area ratio per lot may not exceed .05 more than the base zone maximum floor area per lot.

Duplexes. Duplexes are allowed on corner lots in the R20 and R10 zones, and on interior and corner lots in the R7 through R2.5 zones as follows: 1.

Density. One extra dwelling unit is allowed up to a maximum of two units.

2.

Minimum lot area. Lots for duplexes must meet the minimum lot area standard shown in Table 110-6. Adjustments are prohibited

Zone R20 R10 R7 R5 R2.5

3.

Table 110-6 Duplex Minimum Lot Area Standard Minimum Lot Area 12,000 sq. ft.

6,000 sq. ft.

4,200 sq. ft.

3,000 sq. ft.

1,600 sq. ft.

Compatibility standards. Both units of the duplex must meet the following standards to ensure that the two units have compatible elements. The standards are: a.

Exterior finish materials. The exterior finish material must be the same in type, size and placement.

b.

Roof pitch. The roof pitch must be the same.

c.

Eaves. Roof eaves must project the same distance from the building wall.

110-37

Chapter 33.110 Single-Dwelling Zones

E.

Title 33, Planning and Zoning 8/1/21

d.

Trim. Trim must be the same in type, size and location.

e.

Windows. Windows must match in proportion and orientation.

Triplexes and fourplexes. Triplexes and fourplexes that meet the following standards are allowed on interior and corner lots in the R7 through R2.5 zones. Triplexes and fourplexes are prohibited on lots that abut a street that has not been accepted for maintenance by the City of Portland, or the State of Oregon in the case of state highways, and are prohibited on lots that abut a private street that connects to a street or highway that has not been accepted for maintenance by the City or State. See Title 17.42, Property Owner Responsibility for Streets. Payment in lieu of street improvements does not satisfy this requirement. Triplexes and fourplexes are also prohibited on lots where a Historic or Conservation Landmark or a contributing structure in a Historic or Conservation District was demolished within the past ten years unless the landmark or contributing structure was destroyed by fire or other causes beyond the control of the owner, the only structure that was demolished was an accessory structure, or the demolition was approved through demolition review.

1.

Density. Up to a maximum of four dwelling units are allowed.

2.

Minimum lot area. Lots for triplexes and fourplexes must meet the minimum lot area requirement shown in Table 110-7. Adjustments are prohibited.

Zone R7 R5 R2.5

3.

Table 110-7 Triplex and Fourplex Minimum Lot Area Standard Minimum Lot Area 5,000 sq. ft.

4,500 sq. ft.

3,200 sq. ft.

Visitability. a.

Purpose. Visitability standards ensure that a baseline of accessible features is provided to accommodate people living in or visiting the residence regardless of age or ability. The standards: • • • •

b.

Promote a diverse supply of more physically accessible housing; Allow people of all ages and abilities to easily enter and visit the residence; Foster community interaction by reducing barriers that can lead to social isolation; and Enhance public safety for all residents and visitors.

Visitable unit standard. Unless exempted by Subparagraph E.3.c., at least one dwelling unit on the lot must meet all of the following visitability standards: (1) Visitable entrance. At least one entrance must be accessible via a route that does not have any stairs between it and the street lot line or an on-site parking space. The slope of the route may not exceed 1:8.

(2) Visitable bathroom. At least one bathroom with a sink and toilet must be designed to accommodate an unobstructed circle that is at least 60-inches in diameter. As an alternative, the bathroom may be designed to

110-38

Title 33, Planning and Zoning 8/1/21

Chapter 33.110 Single-Dwelling Zones

accommodate an unobstructed area that is comprised of two rectangles that are at least 36 inches by 60 inches, and oriented at right angles to each other. See Figure 110-14. The visitable bathroom must be on the same floor as the visitable entrance or be accessible from the visitable entrance via a ramp, elevator or lift. Adjustments are prohibited; (3) Visitable living area. There must be at least 200 square feet of living area on the same floor as the visitable entrance or 200 square feet of living area must be accessible from the visitable entrance via a ramp, elevator or lift.

Adjustments are prohibited; and (4) Visitable doors. All door openings between and including the visitable entrance, visitable living area, and the visitable bathroom must be at least 34 inches wide. Adjustments are prohibited. c.

Exemptions. The following are exempt from the standards of this Subsection: (1) Lots with an average slope of 20 percent or greater; (2) Lots where there is more than a 3-foot rise between the highest elevation along the street lot line and the lowest grade measured at the front setback.

(3) Conversion of an existing residential structure to a triplex or fourplex.

Figure 110-14 Visitable Bathroom Clearances

F.

Affordable fourplexes and multi-dwelling structures. Fourplexes and multi-dwelling structures with no more than six dwelling units are allowed on interior and corner lots in the R7 through R2.5 zones when the following standards are met. Fourplexes and multidwelling structures are prohibited on lots that abut a street that has not been accepted for maintenance by the City of Portland, or the State of Oregon in the case of state highways, and are prohibited on lots that abut a private street that connects to a street or highway that has not been accepted for maintenance by the City or State. See Title 17.42, Property Owner Responsibility for Streets. Payment in lieu of street improvements does not satisfy this requirement. Fourplexes and multi-dwelling structures are also prohibited on lots where a Historic or Conservation Landmark or a contributing structure in a Historic or Conservation District was demolished within the past ten years unless the landmark or

110-39

Chapter 33.110 Single-Dwelling Zones

Title 33, Planning and Zoning 8/1/21

contributing structure was destroyed by fire or other causes beyond the control of the owner, the only structure that was demolished was an accessory structure, or the demolition was approved through demolition review.

1.

Density. A maximum of six dwelling units are allowed. More than six dwelling units are prohibited.

2.

Affordability. 50 percent of the total number of dwelling units on the site must be affordable to those earning no more than 60 percent of the area median family income or an affordability level established by Title 30. The applicant must provide a letter from the Portland Housing Bureau certifying that the development meets the affordability requirement of this option and any administrative requirements of the Portland Housing Bureau. The letter must be submitted before a building permit can be issued for the development but is not required in order to apply for a land use review. Adjustments are prohibited.

3.

Minimum lot area. Lots for multi-dwelling structures must meet the minimum lot area requirement shown in Table 110-7. Adjustments are prohibited.

4.

Maximum FAR. The maximum FAR is 1.2 to 1. Adjustments are prohibited.

5.

Maximum Height. The maximum height is 35 feet. Adjustments are prohibited.

6.

Visitability. a.

Purpose. The visitability standard ensures that a baseline of accessible features is provided to accommodate people living in or visiting the residence regardless of age or ability. The standards: • Promote a diverse supply of more physically accessible housing; • Allow people of all ages and abilities to easily enter and visit the residence; • Foster community interaction by reducing barriers that can lead to social isolation; and • Enhance public safety for all residents and visitors.

b.

Visitable unit standard. Unless exempted by Subparagraph E.3.c., at least two dwelling units on the lot must meet all of the following visitability standards: (1) Visitable entrance. At least one entrance must be accessible via a route that does not have any stairs between it and the street lot line or an on-site parking space. The slope of the route may not exceed 1:8.

(2) Visitable bathroom. At least one bathroom with a sink and toilet must be designed to accommodate an unobstructed circle that is at least 60-inches in diameter. As an alternative, the bathroom may be designed to accommodate an unobstructed area that is comprised of two rectangles that are at least 36 inches by 60 inches, and oriented at right angles to each other. See Figure 110-14. The visitable bathroom must be on the same floor as the visitable entrance or be accessible from the visitable entrance via a ramp, elevator or lift. Adjustments are prohibited;

110-40

Title 33, Planning and Zoning 8/1/21

Chapter 33.110 Single-Dwelling Zones

(3) Visitable living area. There must be at least 200 square feet of living area on the same floor as the visitable entrance or 200 square feet of living area must be accessible from the visitable entrance via a ramp, elevator or lift.

Adjustments are prohibited; and (4) Visitable doors. All door openings between and including the visitable entrance, visitable living area, and the visitable c.

Exemptions. The following are exempt from Subparagraph E.3.b: (1) Lots with an average slope of 20 percent or greater; (2) Lots where there is more than a 3-foot rise between the highest elevation along the street lot line and the lowest grade measured at the front setback.

G.

(3) Conversion of an existing residential structure to a fourplex or multidwelling structure.

Planned development. See Chapter 33.270, Planned Developments.

33.110.270 Institutional Development Standards A.

Purpose. The general base zone development standards are designed for residential buildings. Different development standards are needed for institutional uses which may be allowed in single-dwelling zones. The intent is to maintain compatibility with and limit the negative impacts on surrounding residential areas.

B.

Use categories to which these standards apply. The standards of this section apply to uses in the institutional group of use categories, whether allowed by right, allowed with limitations, or subject to a conditional use review. The standards apply to new development, exterior alterations, and conversions to institutional uses. Recreational fields used for organized sports on a school, school site, or in a park, are subject to Chapter 33.279, Recreational Fields for Organized Sports.

C.

The standards.

1.

The development standards are stated in Table 110-8. If not addressed in this section, the regular base zone development standards apply.

2.

Setbacks on a transit street or in a Pedestrian District. a.

Purpose. The purpose of these regulations is to reduce reliance on the automobile and encourage pedestrians and transit riders by ensuring safe and convenient pedestrian access to buildings.

b.

Building setbacks on a transit street or in a Pedestrian District. Buildings on a transit street or in a Pedestrian District must meet the provisions of 33.120.220.C.

c.

Conflicts.

(1) If the depth of the minimum building setback or buffering standards conflicts with the maximum building setback standard, the depth of the

110-41

Chapter 33.110 Single-Dwelling Zones

Title 33, Planning and Zoning 8/1/21 maximum building setback standard supersedes the depth of the minimum building setback and buffering standards.

(2) If the depth of the minimum setback standard for detached accessory structures conflicts with the depth of the minimum buffering standard, the depth of the minimum buffering standard supersedes the depth of the minimum setback standard for detached accessory structures. d.

Exception. Development that is not subject to conditional use review under Section 33.815.040 is exempt from the maximum transit street setback requirement.

3.

Exterior storage. Exterior storage of materials or equipment is prohibited.

4.

Outdoor activity facilities. Except as specified in paragraph C.5. below, outdoor activity facilities, such as swimming pools, basketball courts, tennis courts, or baseball diamonds must be set back 50 feet from abutting R-zoned properties. Playground facilities must be set back 25 feet from abutting R-zoned properties if not illuminated, and 50 feet if illuminated. Where the outdoor activity facility abuts R-zoned properties in School uses, the required setback is reduced to zero.

5.

Recreational fields for organized sports. Recreational fields used for organized sports on a school, school site, or in a park, are subject to Chapter 33.279, Recreational Fields for Organized Sports.

6.

Mechanical equipment. Mechanical equipment located on the ground, such as heating or cooling equipment, pumps, or generators must be screened from the street and any abutting residential zones by walls, fences, or vegetation. Screening must comply with at least the L2 or F2 standards of Chapter 33.248, Landscaping and Screening, and be tall enough to screen the equipment. Mechanical equipment placed on roofs must be screened in one of the following ways, if the equipment is within 50 feet of an abutting R zoned lot: a.

A parapet along facades facing the R zone that is as tall as the tallest part of the equipment;

b.

A screen around the equipment that is as tall as the tallest part of the equipment; or

c.

The equipment is set back from roof edges facing the R zone 3 feet for each foot of height of the equipment.

7.

Electrical substations. In addition to the standards in Table 110-8 5, the entire perimeter of electrical substations, including the street lot line (except for the access point), must be landscaped to the L3 standards stated in Chapter 33.248. This landscaping must be planted on the outside of any security fence. Electrical substations that are in a fully enclosed building are exempt from this requirement.

8.

Grassy areas. Grassy play areas, golf courses, cemeteries, and natural areas are not subject to the L3 landscaping standard of Table 110-8 and are exempt from the setback standard of Paragraph 4, above.

110-42

Title 33, Planning and Zoning 8/1/21 9.

Chapter 33.110 Single-Dwelling Zones

Garbage and recycling collection areas. All exterior garbage cans. Garbage collection areas, and recycling collection areas must be screened from the street and any adjacent properties. Trash receptacles for pedestrian use are exempt. Screening must comply with at least the L3 or F2 standards of Chapter 33.248, Landscaping and Screening. See Section 17.102.270, Business and Multifamily Complexes Required to Recycle, of the Portland City Code for additional requirements for recycling areas.

10. Pedestrian standards. The on-site pedestrian circulation system must meet the standards of Section 33.120.255, Pedestrian Standards.

Table 110-8 Institutional Development Standards [1] Minimum Site Area for New Uses Maximum Floor Area Ratio [2] Maximum Height [3] Minimum Building Setbacks [2]

10,000 sq. ft.

0.5 to 1 50 ft.

1 ft. back for every 2 ft. of bldg. height, but in no case less than 15 ft.

Maximum Building Setback Transit Street or Pedestrian District [7]

20 ft. or per CU/IMP review

Maximum Building Coverage [2] 50% of site area Minimum Landscaped Area [2,4] 25% of site area to the L1 standard Buffering from Abutting Residential Zone [5] 15 ft. to L3 standard Buffering Across a Street from a Residential Zone [5] 15 ft. to L1 standard Setbacks for All Detached Accessory Structures Except Fences [6] 10 ft.

Parking and Loading See Chapter 33.266 Signs See Title 32, Signs and Related Regulations Notes: [1] The standards of this table are minimums or maximums as indicated. Compliance with the conditional use approval criteria might preclude development to the maximum intensity permitted by these standards.

[2] For campus-type developments, the entire campus is treated as one site. Setbacks are only measured from the perimeter of the site. The setbacks in this table only supersede the setbacks required in Table 110-4 3. The normal regulations for projections into setbacks and for detached accessory structures still apply.

[3] Towers and spires with a footprint of 200 square feet or less may exceed the height limit, but still must meet the setback standard. Elevator mechanical equipment that is set back at least 15 feet from all roof edges on street facing facades may extend up to 16 feet above the height limit. Other mechanical equipment and stairwell enclosures that provide rooftop access when these cumulatively cover no more than 10 percent of the roof area and are set back at least 15 feet from all roof edges on street facing facades may extend up to 10 feet above the height limit.

[4] Any required landscaping, such as for required setbacks or parking lots, applies towards the landscaped area standard.

[5] Vehicle areas are subject to the parking lot setback and landscaping standards stated in Chapter 33.266, Parking, Loading And Transportation And Parking Demand Management.

[6] Setbacks for structures that are accessory to recreational fields for organized sports on a school, school site, or in a park, are stated in Chapter 33.279, Recreational Fields for Organized Sports.

[7] The maximum building setbacks are described in 33.110.270.C.

110-43

Chapter 33.110 Single-Dwelling Zones

Title 33, Planning and Zoning 8/1/21

33.110.275 Fences A.

Purpose. The fence standards promote the positive benefits of fences without negatively impacting the community or endangering public or vehicle safety. Fences can create a sense of privacy, protect children and pets, provide separation from busy streets, and enhance the appearance of property by providing attractive landscape materials. The negative effects of fences can include the creation of street walls that inhibit police and community surveillance, decrease the sense of community, hinder emergency access, hinder the safe movement of pedestrians and vehicles, and create an unattractive appearance. These standards are intended to promote the positive aspects of fences and to limit the negative ones.

B.

Types of fences. The standards apply to walls, fences, and screens of all types whether open, solid, wood, metal, wire, masonry, or other material.

C.

Location and height.

1.

Front building setbacks. Fences up to 3-1/2 feet high are allowed in required front building setbacks, or between the front lot line and the front building line of the primary structure, whichever is less.

2.

Side and rear building setbacks. a.

Fences up to 8 feet high are allowed in required side or rear building setbacks that do not abut a pedestrian connection.

b.

Fences abutting a pedestrian connection.

(1) Fences up to 8 feet high are allowed in required side or rear building setbacks that abut a pedestrian connection if the pedestrian connection is part of a right-of-way that is at least 30 feet wide.

(2) Fences up to 3-1/2 feet high are allowed in required side or rear building setbacks that abut a pedestrian connection if the pedestrian connection is part of a right-of-way that is less than 30 feet wide.

3.

4.

Exceptions for corner lots. On corner lots, if the main entrance is on the facade facing the side street lot line, the applicant may elect to meet the following instead of C.1 and C.2. See Figure 110-15. a.

Fences up to 3-1/2 feet high are allowed within the first 10 feet of the side street lot line.

b.

Fences up to 3-1/2 feet high are allowed in required setbacks that abut a pedestrian connection if the pedestrian connection is part of a right-of-way that is less than 30 feet wide;

c.

Fences up to 8 feet high are allowed in the required front building setback, outside of the area subject to 3.a.

d.

Fences up to 8 feet high are allowed in all other side or rear building setbacks.

Not in building setbacks. The height for fences that are not in required building setbacks is the same as the regular height limits of the zone.

110-44

Title 33, Planning and Zoning 8/1/21

Chapter 33.110 Single-Dwelling Zones Figure 110-15 Fence Height Option on Corner Lots

D.

Reference to other regulations. Electrified fences are regulated under Title 26, Electrical Regulations. The use of barbed wire is regulated under Title 24, Building Regulations.

33.110.280 Retaining Walls A.

Purpose. The standards of this section help mitigate the potential negative effects of large retaining walls. Without mitigation, such walls can create a fortress-like appearance and be unattractive. By requiring large walls to step back from the street and provide landscaping, the wall is both articulated and visually softened.

B.

Where these regulations apply.

1.

Generally. These regulations apply to the portions of street-facing retaining walls that are in required setbacks along street lot lines. Where there is no required setback, or the setback is less than 10 feet, the regulations apply to the first 10 feet from the line.

2.

Exceptions. The following are not subject to the regulations of this section: a.

Retaining walls in the areas described in B.1 that are less than four feet high, as measured from the bottom of the footing.

b.

Retaining walls on sites where the site slopes downward from a street in the area described in B.1.

c.

Retaining walls on sites where the site slopes upward from a street and the existing slope within the area regulated by B.1 is 50 percent or more.

d.

Replacing an existing retaining wall, where the replacement will not be taller or wider than the existing wall.

110-45

Chapter 33.110 Single-Dwelling Zones e.

C.

Title 33, Planning and Zoning 8/1/21

Retaining walls on sites where any portion of the site is in an environmental overlay zone.

Standards.

1.

Retaining walls are limited to 4 feet in height measured from the bottom of the footing, as shown in Figure 110-16.

2.

Retaining walls must be set back at least 3 feet from other street-facing retaining walls, as shown in Figure 110-16. The 3 foot setback area must be landscaped to at least the L2 standard, except that trees are not required. A wall or berm may not be substituted for the shrubs.

33.110.285 Demolitions A.

Generally. Demolition on a site that requires a demolition permit is subject to the tree preservation and protection requirements of Title 11, Trees. See Chapter 11.50, Trees in Development Situations.

B.

Historic resources. Demolition of historic resources is regulated by Chapter 33.445, Historic Resource Overlay Zone.

33.110.290 Nonconforming Development Existing developments that do not conform to the development standards of this chapter may be subject to the regulations of Chapter 33.258, Nonconforming Situations.

Figure 110-16 Retaining Walls

110-46

Title 33, Planning and Zoning 8/1/21

Chapter 33.110 Single-Dwelling Zones

33.110.292 Parking and Loading For parking and loading regulations, see Chapter 33.266, Parking, Loading, and Transportation and Parking Demand Management.

33.110.295 Signs The sign regulations are stated in Title 32, Signs and Related Regulations.

(Amended by: Ord. No.165376, effective 5/29/92; Ord. No. 165594, effective 7/8/92; Ord. No. 166313, effective 4/9/93; Ord. No. 167186, effective 12/31/93; Ord. No. 167189, effective 1/14/94; Ord. No. 168698, effective 4/17/95; Ord. No. 169324, effective10/12/95; Ord. No. 170704, effective 1/1/97; Ord. No. 171219, effective 7/1/97; Ord. No. 171718, effective 11/29/97; Ord. No. 171879, effective 2/2/98; Ord. No. 173533, effective 8/2/99; Ord. No. 173593, effective 9/3/99; Ord. No. 173729, effective 9/9/99; Ord. No. 174263, effective 4/15/00; Ord. No. 174378, effective 5/26/00; Ord. No. 175204, effective 3/1/01; Ord. No. 175837, effective 9/7/01; Ord. Nos. 175965 and 176333, effective 7/1/02; Ord. No. 176469, effective 7/1/02; Ord. No. 177028, effective 12/14/02; Ord. No. 177422, effective 6/7/03; Ord. No. 177643, effective 7/10/03; Ord. No. 177701, effective 8/30/03; Ord. No. 177975, effective 11/14/03; Ord. No. 178045, effective 12/10/03; Ord. No. 178172, effective 3/5/04; Ord. No. 178509, effective 7/16/04; Ord. No. 178927, effective 12/31/04; Ord. No. 179092, effective 4/1/05; Ord. Nos. 179980 and 179994, effective 4/22/06; Ord. No. 180619, effective 12/22/06; Ord. No. 181357, effective 11/9/07; Ord. No. 182429, effective 1/16/09; Ord. No. 183598, effective 4/24/10; Ord. No. 183750, effective 6/4/10; Ord. No. 184016, effective 08/20/10; Ord. No. 184235, effective 11/26/10; Ord. No. 185412, effective 6/13/12; Ord. No. 185915; effective 5/1/13; Ord. No. 186639, effective 7/11/14; Ord. No. 186736, effective 8/29/14; Ord. No. 186053, effective 1/1/15; Ord. No. 187216, effective 7/24/15. Ord. No. 187471, effective 1/1/16; Ord. No. 188142, effective 1/13/17; Ord. No. 188259, effective 3/31/17; Ord. No. 188177, effective 5/24/18; Ord. No. 188958, effective 5/24/18; Ord. No. 189488, effective 12/2/19; Ord. No. 189807, effective 12/18/19; Ord. No. 190093, effective 9/11/20 and 8/1/2021; Ord. No. 190380, effective 4/30/21 and 8/1/2021.)

110-47

Chapter 33.110 Single-Dwelling Zones

Title 33, Planning and Zoning 8/1/21

110-48

Title 33, Planning and Zoning 3/1/21

Chapter 33.430 Environmental Zones

33.430 Environmental Zones

430

Sections: General 33.430.010 Purpose 33.430.015 Purpose of the Environmental Protection Zone 33.430.017 Purpose of the Environmental Conservation Zone 33.430.020 Environmental Reports 33.430.030 Relationship to Other Environmental Regulations 33.430.033 Relationship to Scenic Resources Zone 33.430.035 Other City Regulations 33.430.040 Overlay Zones and Map Symbols 33.430.050 Subareas of Environmental Zones 33.430.060 Where These Regulations Apply 33.430.070 When These Regulations Apply 33.430.080 Items Exempt From These Regulations 33.430.090 Prohibitions Development Standards 33.430.110 Purpose 33.430.120 Procedure 33.430.130 Permit Application Requirements 33.430.140 General Development Standards 33.430.150 Standards for Utility Lines 33.430.160 Standards for Land Divisions and Planned Developments 33.430.165 Standards for Property Line Adjustments 33.430.170 Standards for Resource Enhancement Projects 33.430.175 Standards for Right‐of‐Way Improvements 33.430.180 Standards for Stormwater Outfalls 33.430.190 Standards for Public Trails 33.430.195 Standards for Tree Removal in the Scenic Resources Zone Environmental Review 33.430.210 Purpose 33.430.220 When Review is Required 33.430.230 Procedure 33.430.240 Supplemental Application Requirements 33.430.250 Approval Criteria 33.430.260 Use of Performance Guarantees 33.430.270 Special Evaluation by a Trained Professional 33.430.280 Modification of Base Zone Development Standards Natural Resource Management Plans 33.430.310 Purpose 33.430.320 Scope 33.430.330 Procedure 33.430.340 Components 33.430.350 Approval Criteria for Adoption and Amendment

430‐1

Chapter 33.430 Title 33, Planning and Zoning Environmental Zones 3/1/21

Corrections to Violations of This Chapter 33.430.400 Purpose 33.430.405 Correction Options 33.430.407 Recurring Violations of This Chapter Notice and Review Procedure 33.430.410 Purpose 33.430.420 When These Regulations Apply 33.430.430 Procedure Map 430‐1 Balch Creek Watershed Protection Plan Area Map 430‐2 Columbia Corridor Industrial and Environmental Mapping Project Area Map 430‐3 East Buttes, Terraces and Wetlands Conservation Plan Area Map 430‐4 Fanno Creek and Tributaries Conservation Plan Area Map 430‐5 Johnson Creek Basin Protection Plan Area Map 430‐6 Northwest Hills Natural Areas Protection Plan Area Map 430‐7 Skyline West Resource Protection Plan Area Map 430‐8 Southwest Hills Resource Protection Plan Area Map 430‐9 East Columbia Neighborhood Natural Resources Management Plan Area Map 430‐10 (Smith and Bybee Lakes Natural Resources Management Plan Area — repealed on 12/31/13) Map 430‐11 Forest Park Natural Resources Management Plan Area Map 430‐12 Peninsula One Natural Resources Management Plan Area Map 430‐13 Middle Columbia Corridor/Airport Natural Resources Inventory Environmental Mapping Project Area Map 430‐14 Bank Reconfiguration and Basking Features Area

General 33.430.010 Purpose Environmental zones protect resources and functional values that have been identified by the City as providing benefits to the public. The environmental regulations encourage flexibility and innovation in site planning and provide for development that is carefully designed to be sensitive to the site's protected resources. These regulations also help meet other City goals, along with other regional, state, and federal goals and regulations. The environmental regulations also carry out Comprehensive Plan policies and objectives.

33.430.015 Purpose of the Environmental Protection Zone The Environmental Protection zone provides the highest level of protection to the most important resources and functional values. These resources and functional values are identified and assigned value in the inventory and economic, social, environmental, and energy (ESEE) analysis for each specific study area. Development will be approved in the environmental protection zone only in rare and unusual circumstances.

430‐2

Title 33, Planning and Zoning 8/10/20

Chapter 33.430 Environmental Zones

33.430.017 Purpose of the Environmental Conservation Zone The Environmental Conservation zone conserves important resources and functional values in areas where the resources and functional values can be protected while allowing environmentally sensitive urban development.

33.430.020 Environmental Reports The application of the environmental zones is based on detailed studies that have been carried out within ten separate areas of the City. The City’s policy objectives for these study areas are described in the reports. Each study report identifies the resources and describes the functional values of the resource sites. Functional values are the benefits provided by resources. The values for each resource site are described in the inventory section of these reports. The City has adopted the following ten environmental study reports: • • • • • • • • • •

Balch Creek Watershed Protection Plan Columbia Corridor Industrial and Environmental Mapping Project East Buttes, Terraces and Wetlands Conservation Plan Fanno Creek and Tributaries Conservation Plan Johnson Creek Basin Protection Plan Northwest Hills Natural Areas Protection Plan Skyline West Conservation Plan Southwest Hills Resource Protection Plan ESEE Analysis and Recommendation for Natural, Scenic and Open Space Resources within Multnomah County Unincorporated Areas Middle Columbia Corridor/Airport Economic, Social, Environmental and Energy (ESEE) Analysis

33.430.030 Relationship To Other Environmental Regulations Some of the eight study areas discussed under Section 33.430.020 impose additional environmental regulations in Plan Districts. These additional regulations either supplement or supersede the regulations of this Chapter. Paragraph 33.700.070.E describes the hierarchy of regulations within the Zoning Code.

Additionally, Natural Resource Management Plans may contain regulations that supersede or supplement the regulations of this chapter. Whenever natural resource management plan provisions conflict with other provisions of this chapter, the natural resource management plan provisions supersede. Non-conflicting provisions supplement the provisions of this chapter. Maps 430-9, 11 and 12 show Natural Resource Management Plan areas.

The following Plan Districts and Natural Resource Management Plans have additional regulations that may supersede or supplement the environmental regulations of Chapter 430: • • • • • • •

The Balch Creek Watershed (see Chapter 33.563, Northwest Hills Plan District) Cascade Station / Portland International Center Plan District (see Chapter 33.508, Cascade Station / Portland International Center [CS/PIC]) The Columbia South Shore within the Columbia Corridor (see Chapter 33.515, Columbia South Shore Plan District) Johnson Creek Basin (see Chapter 33.537, Johnson Creek Basin Plan District) Northwest Hills Natural Areas (see Chapter 33.563, Northwest Hills Plan District) Skyline West Conservation Plan area (see Chapter 33.563, Northwest Hills Plan District) East Columbia Neighborhood Natural Resources Management Plan (separate document) 430-3

Chapter 33.430 Environmental Zones

Title 33, Planning and Zoning 8/10/20

Forest Park Natural Resources Management Plan (separate document) Natural Resources Management Plan for the Peninsula Drainage District No. 1 (separate document) • Portland International Airport Plan District (see Chapter 33.565, Portland International Airport Plan District) This chapter contains only the City's environmental regulations. Activities which the City regulates through this chapter may also be regulated by other agencies. In cases of overlapping City, Special District, Regional, State, or Federal regulations, the more stringent regulations will control. City approval does not imply approval by other agencies.

• •

33.430.033 Relationship to Scenic Resource Zone When a Scenic Resource zone has been applied at the location of an environmental zone environmental review must include consideration of the development standards of Chapter 33.480, and the scenic qualities of the resource as identified in the Scenic Resources Protection Plan or the Central City Scenic Resources Protection Plan.

33.430.035 Other City Regulations Other City regulations such as Title 10, Erosion Control, and Title 11, Trees, may apply to sites in the environmental overlay zones.

33.430.040 Overlay Zones and Map Symbols There are two environmental overlay zones.

A.

The Environmental Protection overlay zone is applied wherever the City determines that highly significant resources and functional values are present. The Environmental Protection overlay zone is shown on the Official Zoning Maps with the "p" symbol.

B.

The Environmental Conservation overlay zone is applied wherever the City determines that significant resources and functional values are present. The Environmental Conservation overlay zone is shown on the Official Zoning Maps with the "c" symbol.

33.430.050 Subareas of Environmental Zones Environmental overlay zones contain resource areas and transition areas. Resource areas contain significant resources and functional values. Transition areas surround the resource areas. Resources and functional values within transition areas are not significant, but they provide a buffer for the significant resources and functional values within the resource area. The transition area is measured as the first 25 feet inward from an environmental zone boundary. The remaining area is the resource area. See Figure 430-1. The following are three exceptions: A.

Where part of an environmental zone boundary is also the City Limits, there is no transition area.

B.

Where environmental zone boundaries are contained within other environmental zone boundaries, there is no transition area.

C.

Where environmental zone boundaries abut other environmental zone boundaries, transition areas are only measured from the combined outer-most boundaries of the environmental zones.

430-4

Title 33, Planning and Zoning 8/10/20

Chapter 33.430 Environmental Zones Figure 430-1 Environmental Zone Subareas

33.430.060 Where These Regulations Apply These regulations apply to all environmental zones, except those in the Columbia South Shore Plan District that are south of NE Marine Drive, those in the Cascade Station/Portland International Center Plan District, City-owned land within the Forest Park Natural Resources Management Plan area, and the Peninsula Drainage District No. 1 Natural Resources Management Plan area. See also Section 33.430.030, Relationship to Other Environmental Regulations.

33.430.070 When These Regulations Apply Unless exempted by Section 33.430.080, below, the regulations of this chapter apply to the following: A.

Development;

B.

All land divisions and property line adjustments;

C.

Removing, cutting, mowing, clearing, burning, or poisoning native trees and plants listed in the Portland Plant List;

D.

Planting or removing trees and plants listed on the Nuisance Plants List, and planting or removing non-native non-nuisance trees and plants;

E.

Changing topography, grading, excavating, and filling;

F.

Resource enhancement; and

G.

Dedication and expansions of rights-of-way.

33.430.080 Items Exempt From These Regulations The following items, unless prohibited by Section 33.430.090, below, are exempt from the regulations of this chapter. Other City regulations such as Title 10, Erosion Control, and Title 11, Trees, must still be met. When no development or other activities are proposed that are subject to 430-5

Chapter 33.430 Environmental Zones

Title 33, Planning and Zoning 8/10/20

the development standards or review requirements of this chapter, tree removal or pruning allowed under the exemptions below is subject to the tree permit requirements of Title 11, Trees.

A.

Change of ownership;

B.

Temporary emergency procedures necessary for the protection of life, health, safety, or property;

C.

Existing development, operations, and improvements, including the following activities: 1.

Maintenance, repair, and replacement of existing structures, exterior improvements, roads, public trails, public rest points, public viewing areas, public interpretative facilities, and utilities. Replacement is not exempt whenever coverage or utility size is increased;

2.

Continued maintenance of existing gardens, pastures, lawns, and other planted areas, including the installation of new irrigation and drainage facilities, new erosion control features, and the installation of plants except those listed on the Nuisance Plants List.

Change of crop type or farming technique on land currently in agricultural use.

Pruning trees and shrubs within 10 feet of buildings and structures attached to buildings, such as decks, stairs, and carports;

3.

Changes to existing disturbance areas to accommodate outdoor activities such as gardens and play areas so long as plantings do not include plants on the Nuisance Plants List and no trees 6 or more inches in diameter are removed;

4.

Alterations to buildings that do not change the building footprint and do not require adjustments to site-related development standards;

5.

Operation, maintenance, and repair of the following:

6.

a.

Irrigation systems;

b.

Stormwater management systems;

c.

Pumping stations; and

d.

Erosion control and soil stabilization features;

Operation, maintenance, and repair of drainage facilities, flood control structures, and conveyance channels that are managed by Drainage Districts as defined in ORS 547, and where the activity is conducted or authorized by the Drainage District. This exemption does not apply if dredge spoils are placed onto the top of banks of the drainageway, or onto portions of the environmental overlay zone above the ordinary high water mark. Operation, maintenance, and repair of drainage facilities include: a.

Dredging and channel cleaning below the ordinary high water mark and vegetative maintenance within the minimum floodway cross-section of drainageways;

b.

Operation, maintenance, and repair of drainage district pump stations, water control structures, or levees;

430-6

Title 33, Planning and Zoning 8/10/20

7.

Chapter 33.430 Environmental Zones

c.

Reconfiguring the cross-section of drainage channels below the ordinary high water mark, or changing the location of the low flow channel within a wider drainage channel; and

d.

Stabilizing banks and restoring levees back to original condition and footprint;

Removal or trimming of vegetation when no development or other activities subject to the development standards or review requirements of this chapter are proposed, if the following are met: a.

All vegetation removal or trimming activities must be surrounded or protected to prevent erosion and sediment from leaving the site or negatively impacting resources on the site. Permanent erosion control, such as replanting areas of bare soil, must be installed.

b.

The vegetation proposed for removal or trimming is one of the following: (1) Trees or plants listed on the Nuisance Plants List; (2) Dead, dying, or dangerous trees or portions of trees when they pose an immediate danger, as determined by the City Forester or an arborist.

Removing these portions is exempt only if all sections of wood more than 12 inches in diameter either: • Remain, or are placed, in the resource area of the same ownership on which they are cut; or • Are removed, if the City Forester authorizes removal of diseased wood because it will threaten the health of other trees; (3) Non-native non-nuisance trees and plants; (4) Trees or tree limbs that are within 10 feet of an existing building and structures attached to buildings, such as decks, stairs, and carports; (5) Trees or plants that exceed the height restriction of a view corridor with special height restrictions designated in the Scenic Resources Protection Plan or Central City Scenic Resources Protection Plan; or (6) Within the Scenic Resource zone, tree limbs may be trimmed to maintain a view. Tree removal is not exempt.

8.

Pruning trees in accordance with Title 11 permit requirements;

9.

Alterations to existing houseboats or replacing houseboats in existing slips;

10. Development over existing paved surfaces that are over 50 feet from any identified wetland or water body; and 11. Land divisions or Property Line Adjustments where all properties are developed, no additional building sites are created and no additional development is proposed.

D.

The following new development and improvements: 1.

Planting of native vegetation listed on the Portland Plant List when planted with handheld equipment;

430-7

Chapter 33.430 Environmental Zones 2.

Title 33, Planning and Zoning 8/10/20

Public street and sidewalk improvements meeting all of the following: a.

Improvements must be within an existing public right-of-way used by truck or automobile traffic; and

b.

Streets and sidewalks must not exceed the minimum width standards of the Bureau of Transportation Engineering.

3.

Groundwater monitoring wells constructed to the standards of the Oregon Water Resources Department and water quality monitoring stations, where access is by foot only;

4.

Utilities installed above or below developed portions of public rights-of-way;

5.

Utility service using a single utility pole or where no more than 100 square feet of ground surface is disturbed outside of the top of bank of water bodies and where the disturbed area is restored to the pre-construction conditions;

6.

Temporary site investigative work including soil tests, land surveys, groundwater and water quality monitoring stations when all of the following are met: a.

The work is conducted using hand-held equipment only;

b.

The disturbance is temporary;

c.

Disturbance areas are restored to pre-existing conditions; and

d.

No native trees are removed.

7.

Installation of temporary fencing to protect resource enhancement project planting areas, or to close off or control the use of illegal trails. The fence must be removed within 5 years;

8.

Installation of signage as part of public recreational trail and resource enhancement projects;

9.

Additional disturbance for outdoor uses such as gardens and play areas where the added disturbance area meets all of the following: a.

The added disturbance area does not exceed 500 square feet;

b.

The total disturbance area on the site does not exceed standards in Table 430-1;

c.

No native trees 6 or more inches in diameter are removed; and

d.

The disturbance area is located at least 30 feet from the top of bank of a stream or drainage and at least 50 feet from the edge of a wetland.

10. Trails meeting all of the following: a.

Trails must be confined to a single ownership or be within a public trail easement;

b.

Trail widths must not exceed 30 inches, stair width must not exceed 50 inches, and trail grade must not exceed 20 percent except for the portion of the trail containing stairs; 430-8

Title 33, Planning and Zoning 8/10/20

Chapter 33.430 Environmental Zones

c.

Plant trimming must not exceed a height of 8 feet and a width of 6 feet as shown in Figure 430-2;

d.

No native trees 6 or more inches in diameter and no native shrubs larger than 5 feet tall may be removed;

e.

Trails must not be paved; and

f.

Trails must be at least 15 feet from the top of bank of all water bodies.

Figure 430-2 Trail Vegetation Pruning and Maintenance Area

11. All land divisions with tentative plans, final plans, and recorded plats showing all of the following for every lot created or adjusted; and Property Line Adjustments with plans showing all of the following for each lot adjusted: a.

Building sites at least five feet from all resource areas. For the purpose of this subsection, “building site” means an area of any shape in which a square 40 feet by 40 feet will fit;

430-9

Chapter 33.430 Environmental Zones

E.

Title 33, Planning and Zoning 8/10/20

b.

Public and private utilities (including water lines, sewer lines or drain fields, and stormwater disposal facilities) where none of these utilities are in a resource area; and

c.

Streets, driveways, and parking areas where all pavement is at least ten feet from a resource area.

Hand removal of trash, provided that native vegetation is not removed or damaged.

33.430.090 Prohibitions

The following items are prohibited in all environmental zones. Prohibitions apply to both transition areas and resource areas:

A.

The use, packaging, transportation, or storage of hazardous substances, except as follows: 1.

Transportation of hazardous substances through environmental zones by rail or on designated truck routes is allowed; and

2.

Use of consumer quantities of hazardous substances within environmental zones is allowed subject to the regulations of this Title. Consumer quantities of hazardous substances are packaged and distributed in a form intended or suitable for sale through retail sales outlets for consumption by individuals for purposes of personal care and household use.

B.

The planting or propagation of any plant listed on the Nuisance Plants List;

C.

Exterior work activities, unless in conjunction with a river-related or river-dependent use.

See Chapter 33.910, Definitions; and

D.

Dumping of yard debris or trash.

Development Standards 33.430.110 Purpose These development standards are intended to: A.

Encourage sensitive development while minimizing impact on resources;

B.

Provide clear limitations on disturbance within resource areas;

C.

Ensure that new development and alterations to existing development are compatible with and preserve the resources and functional values protected by the environmental zones;

D.

Provide clear planting and erosion control requirements within resource areas;

E.

Buffer the resource area from the noise, fumes, lights, and motion of vehicular traffic associated with industrial, commercial, and multi-dwelling residential uses; and

F.

Limit the impacts on resources and functional values resulting from construction of certain types of utilities.

430-10

Title 33, Planning and Zoning 8/10/20

Chapter 33.430 Environmental Zones

33.430.120 Procedure A.

Generally. Compliance with the development standards of this chapter is required for all development in the environmental zones and is determined as part of the building permit or development permit application process. For proposals that cannot meet all of the standards, Environmental Review is required. Where a proposal can meet all the standards, the applicant may choose to go through the discretionary environmental review process, or to meet the objective standards of this chapter.

The development standards are Sections 33.430.140 through .190; Sections 33.430.150 through .190 address specific types or aspects of development, while 33.430.140 applies to proposals not covered by the more specific sections. A proposal may be subject to several sections. For example, construction of a house may be subject to the General Development Standards of 33.430.140, the standards of 33.430.150, Utilities, and the standards of 33.430.180, Stormwater Outfalls. If the proposal can meet the general standards and standards for utilities, but not those for a stormwater outfall, environmental review is required only for the stormwater outfall. To be eligible to use the development standards for an aspect of a proposal, all of the standards within the relevant section must be met.

B.

Adjustments prohibited. Adjustments to these standards are prohibited. Proposals that do not meet all the standards within each relevant section require approval through environmental review described in Sections 33.430.210 through .280.

33.430.130 Permit Application Requirements A building permit or development permit application that is reviewed for compliance with the standards of this chapter requires more information than a permit not affected by these provisions.

The information in Subsections A and B must be submitted with permit application plans.

Submission of the information in Subsection C is optional.

A.

B.

An existing conditions site plan including: 1.

Location of all Environmental Zone lines on the site;

2.

Outline of any existing disturbance area, including existing utility locations;

3.

Location of any wetlands or water bodies on the site or within 50 feet of the site.

Indicate the location of the top of bank, centerline of stream, or wetland boundary as appropriate;

4.

Within the disturbance area, all trees that are 6 or more inches in diameter must be indicated by size and species. Trees outside of the disturbance area must be shown as crown cover with an indication of species composition; and

5.

Topography shown by contour lines at 2 foot vertical contours in areas of slopes less than 10 percent and at 5 foot vertical contours in areas of slopes 10 percent or greater.

Proposed development plan including: 1.

Outline of the proposed disturbance area, including all areas of proposed utility work;

2.

Location and description of all proposed erosion control devices; 430-11

Chapter 33.430 Environmental Zones

C.

Title 33, Planning and Zoning 8/10/20

3.

A stormwater management plan;

4.

A landscape plan indicating the size, species, and location of all vegetation to be planted in the environmental zone;

5.

Trees proposed to be preserved and trees proposed to be removed. For trees to be preserved, tree protection, meeting the requirements of Chapter 11.60, Technical Specifications, must be shown. A tree plan may also be required to comply with Chapter 11.50, Trees in Development Situations; and

6.

Where applicable, the location and specifications of the site enhancement option with dimensions, a list of plants on the Nuisance Plants List to be removed, and a landscape plan indicating the size, species, and location of all vegetation to be planted.

Photographs of the site are not required but are encouraged to supplement the existing conditions site plan.

33.430.140 General Development Standards The standards below apply to all development in the environmental zones except as follows: • • • • • • •

Utilities subject to Section 33.430.150; Land divisions subject to Section 33.430.160; Property line adjustment subject to Section 33.430.165; Resource enhancement projects subject to Section 33.430.170; Rights-of-way improvements subject to Section 33.430.175; Stormwater outfalls subject to Section 33.430.180; and Public recreational trails subject to Section 33.430.190.

Standards A through C and G through S apply to new development. Standards D through S except L apply to alterations to existing development. Only standards E, J, K, N, Q, R, and S apply in Transition areas. All of the applicable standards must be met.

A.

The maximum disturbance area allowed within the resource area on the site is determined by subtracting all portions of the site outside the resource area from the number listed in Table 430-1.

OS and RF Zone Maximum 5,000 sq. ft.

Disturbance [1] Area

R20

Table 430-1 Maximum Disturbance Area Allowed

5,000 sq. ft.

[1]

R10

R7

R5

All Other Zones

5,000 sq. ft.

[1]

3,500 sq. ft.

[1]

2,500 sq. ft.

[1]

50% of the base zone building coverage or 1 acre, whichever is less [1]

Note: [1] Subtract the amount of area on the site outside the resource area from the number given in the table.

B.

The disturbance area is set back at least 5 feet from the resource area of any environmental protection zone;

430-12

Title 33, Planning and Zoning 3/1/21

C. The disturbance area must be set back at least:

Chapter 33.430 Environmental Zones

1.

Fifty feet from the edge of any identified wetland, from the top of bank of any identified water body within the Columbia Corridor, or any identified water body within a protection zone on lots zoned R10, R20, or RF. When reconfiguration of the bank is carried out in accordance with subsection .170.A, below, results in the top of bank shifting landward, the applicant may choose to measure the setback from the original top of bank. When this occurs, a survey of the original top of bank line and the new top of bank line must be submitted for verification and then recorded with the County recorder. In all cases the disturbance area must be set back at least 5 feet from the new top of bank line;

2.

Thirty feet from the top of bank of any identified water body within a protection zone on all lots except those zoned R10, R20 or RF; and

3.

Thirty feet from the centerline of any identified water bodies within a conservation zone except those within the Columbia Corridor.

D. For alterations to existing development, one of the following must be met: 1.

The disturbance area does not exceed the limitations of Table 430‐1 and the disturbance area is not expanded into or within five feet of the resource area of an environmental protection zone; or

2.

If the existing disturbance area now exceeds the limitations of Table 430‐1, alterations are allowed within the existing disturbance area if the following are met: a.

The existing disturbance area may not be expanded; and

b.

Increases in building coverage and exterior improvement area are allowed if a site enhancement option is completed on the site. Applicants must show that an area equivalent in size to at least 50 percent of the area proposed for development will be enhanced following one or more of the options described in Table 430‐2. If the proposed development is less than 100 square feet, the minimum enhanced area will be 50 square feet.

E.

The proposed development is set back at least 5 feet from the resource area of any environmental protection zone;

F.

The proposed development must be set back at least: 1.

Fifty feet from the edge of any identified wetland, from the top of bank of any identified water body within the Columbia Corridor, or any identified water body within a protection zone on lots zoned R10, R20, or RF. When reconfiguration of the bank is carried out in accordance with subsection .170.A, below, results in the top of bank shifting landward, the applicant may choose to measure the setback from the original top of bank. When this occurs, a survey of the original top of bank line and the new top of bank line must be submitted for verification and then recorded with the County recorder. In all cases the proposed development must be set back at least 5 feet from the new top of bank line;

2.

Thirty feet from the top of bank of any identified water body within a protection zone on lots zoned R7 through IR; and 430‐13

Chapter 33.430 Title 33, Planning and Zoning Environmental Zones 3/1/21

3. Thirty feet from the centerline of any identified water bodies within a conservation zone except those within the Columbia Corridor.

G. The proposed buildings must be set back at least 5 feet from the edge of the disturbance area; H. Where the distance between a building and the edge of the disturbance area is less than 10 feet, additional temporary disturbance area is allowed. The edge of the additional temporary disturbance area may extend no more than 10 feet from the building. The temporary disturbance area must be replanted with three different native shrub species at a minimum 1‐gallon size or bare root, planted at a density of 3 plants per 10 square feet with the remaining area planted with native groundcover using a minimum of 4‐inch pots at a density of 8 plants per 10 square feet; I.

Temporary disturbance areas and portions of the resource area where removal of non‐ native vegetation occurs must be replanted so that the area achieves a 90 percent vegetation cover within one year;

J.

Tree removal and replacement standards.

1.

Removal of native trees is allowed as follows: a.

Trees removed from resource and transition areas must be replaced as shown in Table 430‐3. Trees less than 6 inches in diameter do not have to be replaced.

b.

In resource and transition areas, the combined total diameter of all trees removed may not exceed 225 inches, counting only native trees that are at least 6 inches in diameter;

c.

In resource areas, trees may be removed only if one of the following is met: (1) Within 10 feet of existing or proposed buildings and structures attached to buildings, such as decks, stairs, and carports; (2) Within 10 feet of proposed driveways or right‐of‐way improvements; or (3) To create up to 500 square feet of permanent disturbance area for uses such as gardens and play area.

2.

Non‐native non‐nuisance trees may be removed if each tree at least 6 inches in diameter is replaced as shown in Table 430‐3;

3.

Trees listed on the Nuisance Plants List may be removed, if each tree at least 6 inches in diameter is replaced with one native tree; and

4.

For replacement of non‐native trees and trees in transition areas, applicants may pay a revegetation fee as described in Table 430‐2 in lieu of planting on the site. The fee is based on the number of trees required under Table 430‐3, Option A.

430‐14

Title 33, Planning and Zoning 3/1/21

Chapter 33.430 Environmental Zones

Table 430‐2 Minimum Site Enhancement Options

Option Option 1 Restoration Planting

Option 2 Impervious Surface Reduction

Option 3 Parking Lot Retrofit

Option 4 Revegetation Fee

Action Remove plants listed on the Nuisance Plants List. Plant the area with native plants at the following minimum planting density: 10 plants per 50 square feet at a ratio of one tree, two shrubs, and 7 groundcover plants. Trees must be at least one‐half inch in diameter, shrubs must be at least 1 gallon, and groundcover plants a minimum pot size of 4 inches. The remaining area may be seeded with native grass seed.

Remove impervious surface to improve stormwater management, and replant the area with native plants at the following minimum planting density: 10 plants per 50 square feet at a ratio of one tree, two shrubs, and 7 groundcover plants.

Trees must be at least one‐half inch in diameter, shrubs must be at least 1 gallon, and groundcover plants must be a minimum pot size of 4 inches. The remaining area may be seeded with native grass seed.

Replace existing interior parking lot landscaping with a vegetated infiltration basin using native plants. The minimum planting ratio for this option is one tree and two shrubs for every 50 square feet of planting area, and groundcover plants to cover the remaining area, planted on 12‐inch centers. Trees must be at least one‐half inch in diameter, shrubs must be at least 1 gallon, and groundcover plants a minimum pot size of 4 inches. Enhancements must be approved by the Bureau of Environmental Services as meeting the Stormwater Management Manual, and must also comply with parking lot landscape requirements of this Title.

Pay a revegetation fee.

1. Fee use and administration. The revegetation fee is collected by BDS and is administered by the Bureau of Environmental Services. The fees collected are used for revegetation projects on public or private property within the same watershed as the site.

2. Calculation of required fee contributions. Applicants must contribute the cost to purchase and plant trees, shrubs, and groundcover plants as set out in 3. below. The cost to purchase and plant trees and plants will be adjusted annually as determined by the Director of BES based on current market prices for materials, labor, and maintenance.

3. Required fee contribution. The applicant must contribute the following revegetation fee before a building permit will be issued: ‐ The cost to purchase, plant, and maintain one tree, two shrubs, and 7 groundcover plants for every 50 square feet of planting area; ‐ The fee calculation will be rounded up to the next multiple of $10; and ‐ The minimum area to be used in this calculation is 50 square feet. Calculations that are not a multiple of 50 will be rounded up to the next multiple of 50.

K. Replacement trees must be at least one‐half inch in diameter; shrubs must be in at least a 1‐gallon container or the equivalent in ball and burlap. All trees and shrubs must be selected from the Portland Plant List and planted on the site within the environmental zone. Conifers must be replaced with conifers and shrubs must consist of at least two different species;

430‐15

Chapter 33.430 Environmental Zones

L. Nuisance plants.

Title 33, Planning and Zoning 3/1/21

1. Remove plants on the Nuisance Plants List in an area on the site that is equal to 50 percent of the size of the proposed permanent disturbance area, or from the entire site, whichever is less.

2. Plant removal must occur outside of the permanent and temporary disturbance areas.

3. Nuisance plant removal entails actions such as the removal of: roots, the above ground portion of the plant, and the seeds of the plant such that existing non‐ nuisance or newly installed plants are able to grow and survive. The non‐nuisance plants are maintained free of nuisance plants.

4. The cleared area must be replanted as follows: a. Seed the entire area of removal with a native grass seed. b. Install seven groundcover plants and two shrubs per 50 square feet.

Groundcover plants must be a minimum size of four inch pots and the shrubs a minimum size of one gallon pots. c. Removed native and non‐native non‐nuisance trees are replanted in accordance with Section 33.430.140.M. d. Planting native species listed on the Portland Plant List is required.

M. All vegetation planted in a resource area is native and listed on the Portland Plant List.

Plants listed on the Nuisance Plants List are prohibited;

Table 430‐3 Tree Replacement in Environmental Overlay Zone Size of tree to be removed (inches in diameter)

At least 6 and up to 12 More than 12 and up to 20 More than 20 and up to 25 More than 25 and up to 30 More than 30

Option A (no. of native trees to be planted) 2 3 5 7 10

Option B (combination of native trees and shrubs) not applicable 1 tree and 3 shrubs 3 trees and 6 shrubs 5 trees and 9 shrubs 7 trees and 12 shrubs

N. The minimum front and street building setback and garage entrance setback of the base zone may be reduced to any distance between the base zone minimum and zero. Where a side lot line is also a street lot line the side building and garage entrance setback may be reduced to any distance between the base zone minimum and zero. Parking spaces may be allowed within the first 10 feet from a front lot line, and within a minimum side street setback; O. Maximum front or street setbacks are as follows: 1.

The front building or street setback of the base zone is the maximum building setback for primary structures.

430‐16

Title 33, Planning and Zoning Chapter 33.430 3/1/21 Environmental Zones

2. On a lot with more than one street lot line the maximum setback standard applies to the street lot line that is farthest from the resource area.

3.

P.

In zones with no minimum front or street setback, the maximum setback is 10 feet.

Fences are allowed only within the disturbance area;

Q. Parking and truck area buffers: 1.

Auto and light truck areas. For commercial, industrial, and multi‐dwelling residential uses, parking areas for autos and light trucks include a ten foot perimeter buffer from the resource area. The buffer is landscaped with plants listed on the Portland Plant List to at least the L2 standard, as stated in Chapter 33.248, Landscaping and Screening;

2.

Medium and heavy truck areas. Where allowed by the base zone, the parking, loading, and maneuvering areas for medium and heavy trucks include a ten foot perimeter buffer from the resource area. The buffer is landscaped with plants listed on the Portland Plant List to at least the L3 standard, as stated in Chapter 33.248, Landscaping and Screening;

R. Exterior lights must be spaced at least 25 feet apart. Incandescent lights exceeding 200 watts (or other light types exceeding the brightness of a 200‐watt incandescent light) must be placed so they do not shine directly into resource areas; and S.

Exterior storage and display areas include a ten‐foot perimeter buffer from the resource area. The buffer is landscaped to at least the L3 standard, as stated in Chapter 33.248, Landscaping and Screening.

33.430.150 Standards for Utility Lines The following standards apply to private connections to existing utility lines and the upgrade of existing public utility lines in resource areas. All of the standards must be met unless exempted by Subsection F. A. The disturbance area for private connections to existing utility lines is no greater than 10 feet wide; B. The disturbance area for the upgrade of existing public utility lines is no greater than 15 feet wide; C.

The utility construction does not occur within a stream channel, identified wetland, or water body;

D. Disturbance areas must be planted with native species listed in the Portland Plant List according to the following densities: 1.

Three different native shrub species are required at a minimum 1‐gallon size or bare root, planted at a density of 3 plants per 10 square feet;

2.

The remaining area must be planted with native groundcover using a minimum of four inch pots at a density of 8 plants per ten square feet; and

3.

Below the top of bank on slopes greater than 30 percent or in riprap areas, live stakes, 2 to 12 inches in diameter, may be substituted for the requirements of D.1 and D.2 430‐17

Chapter 33.430 Title 33, Planning and Zoning Environmental Zones 3/1/21

above. Stakes must be installed at a density of 2 to 4 stakes per square yard. Detailed specifications for installing live stakes are found in the Erosion Control Manual.

E.

F.

Tree removal and replacement standards are as follows: 1.

Native trees more than 12 inches in diameter may not be removed. Each native tree more than 6 but less than 12 inches in diameter that is cut must be replaced as shown in Table 430‐3;

2.

Non‐native non‐nuisance trees may be removed, if each tree 6 or more inches in diameter is replaced as shown in Table 430‐3;

3.

Trees listed on the Nuisance Plants List may be removed if each tree 6 or more inches in diameter is replaced with one tree;

4.

Replacement trees and shrubs must meet the planting standards in 33.430.140.K; and

5.

Where a utility line is approximately parallel with the stream channel at least half of the replacement trees must be planted between the utility line and the stream channel, except where a utility easement precludes tree planting.

Exemption. If a proposed utility line or upgrade to a utility line runs through an area that has already been approved as a disturbance area, or allowed by the standards of this chapter, it is exempt from Subsections A, B and D.

33.430.160 Standards for Land Divisions and Planned Developments The following standards apply to land divisions and Planned Developments in the environmental overlay zones. All of the standards must be met.

A. All development is outside the resource area of the environmental protection zone; B. Where there is a house on the site that is in the environmental protection zone, it may remain if a new lot is created that meets the following:

C.

1.

The existing house will remain; and

2.

A new lot is created that is no larger than required to contain the existing house, garage, minimum required setbacks, a 12‐foot wide driveway, and an open area of 20 feet by 20 feet.

Resource areas of the environmental protection zone that are outside of lots being created under the provisions of Subsection B., above, are located entirely within environmental resource tracts. The tracts must be owned in common by all of the owners of the land division site, by a Homeowners’ Association, by a public agency, or by a non‐profit organization; and

D. The total amount of disturbance area allowed within the resource area of the environmental conservation zone is either the amount listed in Table 430‐4 or 1 acre, whichever is less, minus the amount of area outside the resource area;

430‐18

Title 33, Planning and Zoning 3/1/21

Chapter 33.430 Environmental Zones

Table 430‐4 Maximum Disturbance Area for a Land Division and PD Allowed Within the Resource Area[1]

OS and RF R20 Zone R10 Zone Zone Maximum 5% of site 12% of site 15% of site Disturbance area area area Area

Notes: [1] Disturbance area includes utility construction.

R7 Zone

R5 Zone

All Other Zones

17% of site area

22% of site area

50% of the base zone building coverage

E.

Resource areas outside designated disturbance areas must be placed entirely within environmental resource tracts. The tracts must be owned in common by all of the owners of the land division site, by a Homeowners’ Association, by a public agency, or by a non‐ profit organization;

F.

Tree removal is allowed as follows: 1.

Native trees. In residential zones, the combined total diameter of native trees cut may not exceed 225 inches per dwelling unit, counting only native trees that are at least 6 inches in diameter. In all other zones, native tree removal is limited to the boundaries of the approved disturbance area. Native trees must be replaced as shown in Table 430‐3;

2.

Non‐native non‐nuisance trees. Non‐native non‐nuisance trees may be removed, but must be replaced as shown in Table 430‐3; and

3.

Nuisance trees. Trees listed on the Nuisance Plants List may be removed, but must be replaced. Each tree 6 or more inches in diameter must be replaced with one native tree.

G. The standards of Subsections 33.430.140.B, C, and K through R must be met.

H. Streets, alleys, walkways, and stormwater facilities are not created within 50 feet of an identified wetland or water body. The standard does not apply to recreational trails identified by the Comprehensive Plan; I.

New right‐of‐way and roadway widths do not exceed the maximums listed in Table 430‐5; and

J.

Utility construction must meet the applicable standards of Section 33.430.150. Private utility lines on a lot where the entire area of the lot is approved to be disturbed and where the private utility line provides connecting service directly to the lot from a public system are exempt from this standard.

430‐19

Chapter 33.430 Environmental Zones

Title 33, Planning and Zoning 3/1/21

Table 430‐5 Maximum Right‐of‐way and Roadway Widths Base Zone OS and RF – R7 R5 R2.5 – IR and C, E, I, and CI

OS and RF – R5 R2.5 ‐ IR and C, E, I, and CI

Type of Street Through Through Through

Dead‐end Dead‐end

Right‐of Way Width 35 feet 40 feet 40 feet

35 feet 40 feet

Roadway Width 20 feet 20 feet 28 feet

20 feet 28 feet

33.430.165 Standards for Property Line Adjustments The following standards apply to Property Line Adjustments (PLAs) in the environmental overlay zones that do not meet one of the exemptions in 33.430.080.C.11 or 33.430.080.D.11. For purposes of this section, the site of a Property Line Adjustment is the two properties affected by the relocation of the common property line. All of the standards must be met.

A. A Property Line Adjustment may not result in any property being entirely in the environmental protection zone, unless that property is entirely in the environmental protection zone before the PLA, or the property will be dedicated or limited by deed restriction to the uses allowed in the OS zone.

B. The amount of area on each property that is outside of the resource area of the environmental overlay zone may not be reduced below the square footage in Table 430‐6.

A property that contains less than the area listed in Table 430‐6 outside of the resource area of the environmental overlay zone may not move further out of conformance with Table 430‐6.

Table 430‐6 Minimum Area Required Outside of Resource Area

Minimum Area Required

OS through R10 Zones 5,000 sq. ft.

R7 Zone

R5 Zone

All Other Zones

3,500 sq. ft.

2,500 sq. ft.

50% of the base zone building coverage or 1 acre, whichever is less

33.430.170 Standards for Resource Enhancement Projects The following standards apply to resource enhancement projects in the environmental zones. The applicant for projects that will take place within the area shown on Map 430‐14 may choose to meet all of the standards of subsection A, all of the standards of subsection B, or all of the standards of subsection C. Applicants for projects that will take place outside the area shown on Map 430‐14 must meet all of the standards in subsection C. A. Bank reconfiguration. The following standards apply to bank reconfiguration projects that take place in the Bank Reconfiguration and Basking Features Area shown on Map 430‐14.

Slough and drainageway banks, which are the area between the ordinary high water mark and the top of bank, may be regraded when all of the following are met: 1.

The activity is conducted or authorized by the Multnomah County Drainage District #1 or Peninsula Drainage District #2; 430‐20

Title 33, Planning and Zoning Chapter 33.430 3/1/21 Environmental Zones

2. The final slope above ordinary high water after grading is 33 percent or less (33 percent slope represents a rise to run ratio equal to 1:3); 3.

Rock armoring may not be used except surrounding outfalls, inlets, culverts and bridge crossings, the rock armoring cannot exceed a distance of 5 feet from those features, and must be planted with live stakes of native plant stock, one half inch in diameter.

Stakes must be used at a density of 2 to 3 stakes per 9 square feet. If the armoring is located on a levee, live stakes are not required;

4.

The placement of large wood on the bank is allowed to improve bank stabilization if installed above the Base Floodplain Elevation (BFE), as defined on the Federal Emergency Management Agency Flood Insurance Rate Maps;

5.

Trees or snags, 6 inches or greater in diameter, that are removed landward of the new top‐of‐bank must be replaced and meet the following: a.

Each tree or snag, 6 inches or greater in diameter, removed must be replaced as specified in Table 430‐3, Tree Replacement;

b.

Replacement trees and shrubs must be native and selected from the Portland Plant List;

c.

Replacement shrubs must be in at least a 2‐gallon container or the equivalent in ball or burlap;

d.

Replacement trees must: (1) Be at least one‐half inch in diameter and have a maximum height‐at‐ maturity that will not project above the height limit of the h overlay zone; and (2) Be planted within a transition area or resource area on a property owned by the applicant; or for which the applicant possesses a legal instrument that is approved by the City (such as an easement or deed restriction) sufficient to carry out and ensure success of the mitigation; or can demonstrate legal authority to acquire the site through eminent domain;

e.

6.

If the replacement trees are planted within 100 feet of the Columbia Slough main channels or secondary drainageways, the trees must be planted above the Base Floodplain Elevation (BFE), as defined on the Federal Emergency Management Agency Flood Insurance Rate Maps.

The area between the ordinary high water mark and the new top of bank must be revegetated as specified in Figure 430‐3 and Table 430‐7, Bank Revegetation.

430‐21

Chapter 33.430 Environmental Zones

Title 33, Planning and Zoning 3/1/21 Figure 430‐3 Bank Revegetation

Table 430‐7 Bank Revegetation Water Body

Zone (See Figure 565‐2)

Zone 1 Sloughs and drainageways; except on levees Zone 2

On levees

Zone 1 and 2

Planting Requirements A mix of native emergent wetland vegetation planted at a rate of 50 plugs of vegetation per 100 square feet of area, ten native shrubs for every 100 square feet of area and a native grass and forb seed mix at a rate of 30 pounds per acre. No trees may be planted in Zone 1.

A. Outside of the Airport Subdistrict of the Portland International Airport plan district, one native tree, three native shrubs and four other native plants for every 100 square feet of area. Trees may be clustered.

B. Within the Airport Subdistrict of the Portland International Airport plan district, Option A or ten native shrubs for every 100 square feet of area and a native grass and forb seed mix at a rate of 20 pounds per acre.

A native grass and forb seed mix at a rate of 50 pounds per acre or a grass seed mix approved by the US Army Corps of Engineers for use on levees applied at a rate of 50 pounds per acre.

7.

Disturbance areas related to structure removal must be replanted with native plants to achieve a 90 percent vegetative cover within one year. Disturbance area that is related to the removal of structures from the water is exempt from this standard;

8.

No structures are proposed except for public viewing areas developed as part of the project. The public viewing areas must meet the following: a.

The viewing area contains no more than 500 square feet of permanent disturbance area;

b.

The viewing area is at least 30 feet from the top of bank of a stream, drainageway, wetland, or other water body;

430‐22

Title 33, Planning and Zoning 3/1/21

c. The viewing area is not in the floodway;

9.

Chapter 33.430 Environmental Zones

d.

Native trees more than 10 inches in diameter are not removed; and

e.

Each 6 to 10‐inch diameter native tree removed is replaced at a rate of three trees for each one removed. The replacement trees must be a minimum one‐half inch diameter or 3 to 5‐gallon conifers and be native trees listed on the Portland Plant List. All trees must be planted on the site; and

Temporary disturbance areas may be seeded with non‐native seed that is sterile and is certified as 100 percent weed‐free for erosion control purposes until replanting occurs.

B. Basking features. The following standards apply to the placement of large wood or large rocks as basking features for wildlife in the Bank Reconfiguration and Basking Features Area shown on Map 430‐14. The placement of large wood or large rocks as basking features for wildlife within the Columbia Slough, Whitaker Slough, Buffalo Slough, Peninsula Canal, or other drainageways or identified wetlands is allowed when all of the following are met: 1.

The activity is conducted or authorized by the Multnomah County Drainage District #1, Peninsula Drainage District #2 or the City of Portland Bureau of Environmental Services;

2.

No native trees are removed;

3.

The basking feature is installed above the Base Floodplain Elevation (BFE), as defined on the Federal Emergency Management Agency Flood Insurance Rate Maps;

4.

Disturbance areas related to structure removal must be replanted with native plants to achieve a 90 percent vegetative cover within one year. Disturbance area that is related to the removal of structures from the water is exempt from this standard;

5.

No structures are proposed except for public viewing areas developed as part of the project. The public viewing areas must meet the following:

6.

a.

The viewing area contains no more than 500 square feet of permanent disturbance area;

b.

The viewing area is at least 30 feet from the top of bank;

c.

The viewing area is not in the floodway;

d.

Native trees more than 10 inches in diameter are not removed; and

e.

Each 6 to 10‐inch diameter native tree removed is replaced at a rate of three trees for each one removed. The replacement trees must be a minimum one‐half inch diameter or 3 to 5‐gallon conifers and be native trees listed on the Portland Plant List. All trees must be planted on the site; and

Temporary disturbance areas may be seeded with non‐native seed that is sterile and is certified as 100 percent weed‐free for erosion control purposes until replanting occurs.

430‐23

Chapter 33.430 Title 33, Planning and Zoning Environmental Zones 3/1/21

C. All other resource enhancement projects. The following standards apply to all other resource enhancement projects not addressed by subsections 170.A or B. All of the following standards must be met: 1.

There is no excavation or fill of, or construction activity within any wetland or water body;

2.

There is no net fill, or increase in the amount of soil on the site;

3.

No native vegetation listed on the Portland Plant List is removed except as allowed by C.5. below. Non‐native trees and vegetation may be removed;

4.

Disturbance areas related to structure removal must be replanted with native plants to achieve a 90 percent vegetative cover within one year. Disturbance area that is related to the removal of structures from the water is exempt from this standard;

5.

No structures are proposed except for public viewing areas developed as part of the project. The public viewing areas must meet the following:

6.

a.

The viewing area contains no more than 500 square feet of permanent disturbance area;

b.

The viewing area is at least 30 feet from the top of bank;

c.

The viewing area is not in the floodway;

d.

Native trees more than 12 inches in diameter are not removed;

e.

Each 6 to 12‐inch diameter native tree removed is replaced as shown in Table 430‐3. Replacement trees and shrubs must comply with the planting standards of Subsection 33.430.140.K; and

Temporary disturbance areas may be seeded with non‐native see that is sterile and is certified as 100 percent weed‐free for erosion control purposes until replanting occurs.

33.430.175 Standards for Right‐of‐Way Improvements The following standards apply to unimproved and partially improved rights‐of‐way. All of the standards must be met. New rights‐of‐way that are part of a proposed land division or planned development must be reviewed under the Standards for Land Divisions and Planned Developments in Section 33.430.160.

A. The proposed paved roadway portion of the right‐of‐way must not be more than 26 feet wide and 2600 square feet in area; B. The proposed disturbance area for the right‐of‐way improvement must;

C.

1.

Be at least 50 feet from the edge of any wetland or waterbody;

2.

Be at least 5 feet from the resource area of any environmental protection zone; and

3.

Be no larger than 3300 square feet in area;

Planted areas, including stormwater swales, must be planted with native plants from the Portland Plant List; 430‐24

Title 33, Planning and Zoning Chapter 33.430 3/1/21 Environmental Zones

D. Trees within the right‐of‐way may be removed within the improvement area and within 10 feet of the edge of the improvement. In no case may the combined total diameter of all trees removed exceed 225 inches, counting only native trees that are at least 6 inches.

Trees other than native trees are exempt from this standard and may be removed without being counted as part of the 225 inches; and E.

The right‐of‐way improvements meet the development requirements of the City Engineer or the Permanent Rule for Private Rights‐of‐Way.

33.430.180 Standards for Stormwater Outfalls The following standards apply to the installation of stormwater outfalls. All of the standards must be met.

A. The temporary disturbance area for the stormwater outfall is no greater than 10 feet wide; B. Native trees 12 or more inches in diameter may not be removed. Each native tree at least 6 inches but less than 12 inches in diameter that is removed must be replaced as shown in Table 430‐3; C.

Non‐native non‐nuisance trees may be removed. Each tree at least 6 inches in diameter must be replaced as shown in Table 430‐3;

D. Trees listed on the Nuisances Plant List may be removed. Each tree at least 6 inches in diameter must be replaced with one tree.

E.

Replacement trees and shrubs must comply with the planting standards of Subsection 33.430.140.K; and

F.

Temporary disturbance areas must be planted with native species listed in the Portland Plant List according to the following densities: 1.

Three different native shrub species are required at a minimum 1‐gallon size or bare root, planted at a density of 3 plants per 10 square feet; and

2.

The remaining area must be planted with native groundcover using a minimum of 4‐ inch pots at a density of 8 plants per 10 square feet;

G. When constructed open channels or vegetated swales are proposed, the slope between the stormwater source and the waterbody does not exceed 15 percent at any point; H. Only one outfall pipe may be used on a site. The outfall pipe size may not exceed 4 inches in diameter; and I.

If an outfall riprap pad is used it must be planted with live stakes of native plant stock, one‐ half inch in diameter. Stakes must be installed at a density of 2 to 3 stakes per square yard.

Detailed specifications for installing live stakes are found in the Erosion Control Manual.

33.430.190 Standards for Public Trails The following standards apply to public trails and viewing areas developed in conjunction with the public trail. All of the standards must be met.

A. The trail is located on public property or within a public trail easement;

430‐25

Chapter 33.430 Title 33, Planning and Zoning Environmental Zones 3/1/21

B. The trail is no longer than 5,000 feet and no wider than 4 feet with a maximum vegetation clearance of 8 feet high and 2 feet on either side of the trail (see Figure 430‐4); C.

If the trail crosses a waterbody it is constructed above the top of bank;

D. If a public viewing area is proposed, the following must be met:

E.

1.

The viewing area may create up to 500 square feet of permanent disturbance area;

2.

The viewing area is at least 30 feet from the top of bank of a stream, drainageway, wetland or other water body; and

3.

The viewing area is not in the floodway;

Tree removal and replacement standards: 1.

Native trees up to 12 inches in diameter and non‐native trees of any size may be removed with hand‐held equipment or equipment with a wheel/surface‐to‐ground pressure of no more than 7.5 psi;

2.

Trees that are more than 6 inches in diameter that are removed must be replaced as shown in Table 430‐3; and

3.

Replacement trees must meet the planting standards in 33.430.140.K.

430‐26

Title 33, Planning and Zoning 3/1/21

Chapter 33.430 Environmental Zones

Figure 430‐4 Trail Vegetation Pruning and Maintenance Area

33.430.195 Standards for Tree Removal in the Scenic Resources Zone The following standards apply to removal of native trees up to 12 inches in diameter and non‐native trees of any size that are located within an Environmental overlay zone and the Scenic Resource zone: A. Trees may be removed with hand‐held equipment or equipment with a wheel/surface‐to‐ ground pressure of no more than 7.5 psi; B. Trees that are more than 6 inches in diameter that are removed must be replaced as shown in Table 430‐3, and replacement trees must be planted outside of the Scenic Resource overlay zone; C.

Temporary disturbance areas caused by the tree removal must be replanted to meet one of the following options. Shrubs planted to meet this standard may be counted towards meeting the replacement requirements shown in Table 430‐3: 1.

Option 1. Three shrubs and four other plants must be planted for every 100 square feet of temporary disturbance area; or

430‐27

Chapter 33.430 Title 33, Planning and Zoning Environmental Zones 3/1/21

2. Option 2. Three shrubs must be planted for every 100 square feet of temporary disturbance area and the remainder of the temporary disturbance area must be seeded with a grass and forb seed mix at a ratio of 30 pounds per acre; and D. Replacement plantings must meet the planting standards in 33.430.140.K.

Environmental Review 33.430.210 Purpose Environmental review is intended to: A. Prevent harm to identified resources and functional values, compensate for unavoidable harm, and ensure the success of mitigation and enhancement activities; B. Provide a mechanism to modify the development standards of this Chapter if the proposed development can meet the purpose of these regulations; C.

Provide flexibility for unusual situations. The review provides for consideration of alternative designs for development that have the least impact on protected resources in the environmental conservation zone and more exacting control over development in the environmental protection zone;

D. Allow for more accurate maps and more certainty for property owners by allowing for the location of the environmental zone boundary to be modified when permitted changes to a resource occur or when the boundary location is determined more precisely on a specific site through a more detailed environmental study; and E.

Provide for the replacement of resources and functional values that are lost through violations of this Chapter.

33.430.220 When Environmental Review is Required Environmental review is required for all development in an environmental zone that does not meet the development standards of Sections 33.430.140 through .190 and for violations of this chapter.

Environmental review is also required when an applicant wishes to fine‐tune the zone boundary location based on a detailed environmental study. The City Council, Planning and Sustainability Commission, or Director of BDS may initiate an environmental review for environmental zone boundary amendments to reflect permitted changes in the location or quality of resources or functional values. Removal of environmental zone boundaries are processed as a change of an overlay zone, as stated in Chapter 33.855, Zoning Map Amendments. The zone boundary change procedure does not apply to changes caused by violations of this chapter. The procedure for violations of this chapter is described in Section 33.430.400.

33.430.230 Procedure Environmental reviews are processed through the following procedures: A. Property Line Adjustments, resource enhancement activities, public recreational trails, rest points, view points, and interpretative facilities are processed through the Type Ix procedure.

B. The following are processed through the Type II procedure:

430‐28

Title 33, Planning and Zoning Chapter 33.430 3/1/21 Environmental Zones

1. Roads, driveways, walkways, stormwater disposal, and buried connections to existing utility lines;

C.

2.

Public safety facilities;

3.

Environmental zone boundary modifications;

4.

All other uses and development in resource areas of Environmental Conservation zones; and

5.

Development within the Transition Area only.

All other uses or development in resource areas of Environmental Protection zones are processed through the Type III procedure.

33.430.240 Supplemental Application Requirements In addition to the application requirements of Section 33.730.060, the following information is required for an environmental review application: A. Supplemental site plans required. One copy of each plan must be at a scale of at least one inch to 100 feet. The following supplemental site plans are required:     

Existing conditions; Conditions existing prior to a violation (if applicable); Proposed development; Construction management; and Mitigation or remediation.

A mitigation site plan is required whenever the proposed development will result in unavoidable significant detrimental impact on the identified resources and functional values. A remediation site plan is required whenever significant detrimental impacts occur in violation of the Code and no permit was applied for. The Director of BDS may waive items listed in this Subsection if they are not applicable to the specific review; otherwise they must be included. Additional information such as wetland characteristics or soil type may be requested through the review process.

1.

2.

The existing conditions site plan must show the following for the entire site: a.

Special flood hazard area and floodway boundaries;

b.

Boundaries of the resource area and the transition area. These boundaries may be scaled in relation to property lines from the Official City Zoning Maps;

c.

Topography shown by contour lines at two foot vertical contours in areas of slopes less than ten percent and at five foot vertical contours in areas of slopes ten percent or greater;

d.

Drainage patterns, using arrows to indicate the direction of major drainage flow; and

e.

Existing improvements such as structures, or buildings, utility lines, fences, etc.

The proposed development site plan must show the following:

430‐29

Chapter 33.430 Title 33, Planning and Zoning Environmental Zones 3/1/21

a. In areas of the site that have been or will be part of the permanent disturbance area, distribution outline of shrubs and groundcovers, with a list of most abundant species;

3.

4.

b.

In areas of the site that are and will remain undisturbed: Tree crown cover outline, and generalized species composition;

c.

A grading plan showing proposed alteration of the ground at two‐foot vertical contours in areas of slopes less than ten percent and at five‐foot vertical contours in areas of slopes ten percent or greater;

d.

Trees six or more inches in diameter, identified by species, with trees proposed to be preserved and removed indicated. In the case of violations, also indicate those that were cut or damaged by stump diameter and species;

e.

Proposed development, including proposed buildings, walkways, decks, retaining walls, bridges, garages, utility lines, stormwater management systems; and

f.

Proposed planting areas.

A construction management site plan must show the following: a.

Areas that will be temporarily or permanently disturbed, including equipment maneuvering areas, and perimeter controls;

b.

Areas where existing topography and vegetation will be left undisturbed;

c.

Location of site access and egress;

d.

Equipment and material staging and stockpile areas;

e.

Erosion control measures; and

f.

Measures to protect trees and vegetation. Tree protection must meet the requirements of Chapter 11.60, Technical Specifications.

A mitigation or remediation site plan must show the following: a.

Dams, weirs, or other in‐water structures;

b.

Distribution outline, species composition, number, and percent cover of groundcovers to be seeded or planted;

c.

Distribution outline, species composition, size, number, and spacing of shrubs to be planted;

d.

Location, species, number, and size of each tree to be planted;

e.

Stormwater management features, including retention, infiltration, detention, discharges, and outfalls;

f.

Water bodies to be created, including depth;

g.

Water sources to be used, including volumes; and

h.

Information showing compliance with Section 33.248.090, Mitigation and Restoration Plantings.

430‐30

Title 33, Planning and Zoning 3/1/21

B. Supplemental narrative. The following is required: 1.

Chapter 33.430 Environmental Zones

Impact evaluation. An impact evaluation is required to determine compliance with the approval criteria and to evaluate development alternatives for a particular site. The alternatives must be evaluated on the basis of their impact on the resources and functional values of the site. In the case of a violation, the impact evaluation is used to determine the nature and scope of the significant detrimental impacts. To the extent that the site resources and functional values are part of a larger natural system such as a watershed, the evaluation must also consider the cumulative impacts on that system. The impact evaluation is based on the resources and functional values identified as significant in the reports listed in section 33.430.020; a.

An impact evaluation includes: (1) Identification, by characteristics and quantity, of the resources and their functional values found on the site; (2) Evaluation of alternative locations, design modifications, or alternative methods of development to determine which options reduce the significant detrimental impacts on the identified resources and functional values of the site; and (3) Determination of the alternative that best meets the applicable approval criteria and identify significant detrimental impacts that are unavoidable.

b.

An impact evaluation for a violation includes: (1) Description, by characteristics and quantity, of the resources and functional values on the site prior to the violation; and (2) Determination of the impact of the violation on the resources and functional values.

2.

Construction management plan. Identify measures that will be taken during construction or remediation to protect the remaining resources and functional values at and near the construction site and a description of how undisturbed areas will be protected. For example, describe how trees will be protected, erosion controlled, construction equipment controlled, and the timing of construction; and

3.

Mitigation or remediation plan. The purpose of a mitigation or remediation plan is to compensate for unavoidable significant detrimental impacts that result from the chosen development alternative or violation as identified in the impact evaluation. A mitigation or remediation plan includes: a.

Resources and functional values to be restored, created, or enhanced on the mitigation or remediation site;

b.

Documentation of coordination with appropriate local, regional, special district, state, and federal regulatory agencies;

c.

Construction timetables;

d.

Operations and maintenance practices;

430‐31

Chapter 33.430 Environmental Zones

e. Monitoring and evaluation procedures;

Title 33, Planning and Zoning 3/1/21

f.

Remedial actions for unsuccessful mitigation; and

g.

Information showing compliance with Section 33.248.090, Mitigation and Restoration Plantings.

33.430.250 Approval Criteria An environmental review application will be approved if the review body finds that the applicant has shown that all of the applicable approval criteria are met. When environmental review is required because a proposal does not meet one or more of the development standards of Section 33.430.140 through .190, then the approval criteria will only be applied to the aspect of the proposal that does not meet the development standard or standards.

A. Public safety facilities, rights‐of‐way, driveways, walkways, outfalls, utilities, land divisions, Property Line Adjustments, Planned Developments, and Planned Unit Developments. Within the resource areas of environmental zones, the applicant's impact evaluation must demonstrate that all of the general criteria in Paragraph A.1 and the applicable specific criteria of Paragraphs A.2, 3, or 4, below, have been met: 1.

General criteria for public safety facilities, rights‐of‐way, driveways, walkways, outfalls, utilities, land divisions, Property Line Adjustments, Planned Developments, and Planned Unit Developments; a.

Proposed development locations, designs, and construction methods have the least significant detrimental impact to identified resources and functional values of other practicable and significantly different alternatives including alternatives outside the resource area of the environmental zone;

b.

There will be no significant detrimental impact on resources and functional values in areas designated to be left undisturbed;

c.

The mitigation plan demonstrates that all significant detrimental impacts on resources and functional values will be compensated for;

d.

Mitigation will occur within the same watershed as the proposed use or development and within the Portland city limits except when the purpose of the mitigation could be better provided elsewhere; and

e.

The applicant owns the mitigation site; possesses a legal instrument that is approved by the City (such as an easement or deed restriction) sufficient to carry out and ensure the success of the mitigation program; or can demonstrate legal authority to acquire property through eminent domain.

2.

Public safety facilities. The public benefits of the proposal outweigh all significant detrimental impacts;

3.

Rights‐of‐way, driveways, walkways, outfalls, and utilities; a.

The location, design, and construction method of any outfall or utility proposed within the resource area of an environmental protection zone has the least significant detrimental impact to the identified resources and functional values of

430‐32

Title 33, Planning and Zoning Chapter 33.430 3/1/21 Environmental Zones

other practicable alternatives including alternatives outside the resource area of the environmental protection zone;

4.

b.

There will be no significant detrimental impact on water bodies for the migration, rearing, feeding, or spawning of fish; and

c.

Water bodies are crossed only when there are no practicable alternatives with fewer significant detrimental impacts.

Land divisions, Property Line Adjustments, Planned Developments, and Planned Unit Developments: a.

Proposed uses and development must be outside the resource area of the Environmental Protection zone except as provided under Paragraph A.3 above.

Other resource areas of Environmental Protection zones must be in environmental resource tracts;

b.

There are no practicable arrangements for the proposed lots, tracts, roads, or parcels within the same site, that would allow for the provision of significantly more of the building sites, vehicular access, utility service areas, and other development on lands outside resource areas of a conservation zone; and

c.

Development, including building sites, vehicular access and utilities, within the resource area of a conservation zone must have the least amount of detrimental impact on identified resources and functional values as is practicable.

Significantly different but practicable development alternatives, including alternative housing types or a reduction in the number of proposed or required units or lots, may be required if the alternative will have less impact on the identified resources and functional values than the proposed development.

B. Resource enhancement projects. In resource areas of environmental zones, resource enhancement projects will be approved if the applicant's impact evaluation demonstrates that all of the following are met:

C.

1.

There will be no loss of total resource area;

2.

There will be no significant detrimental impact on any resources and functional values; and

3.

There will be a significant improvement of at least one functional value.

Public recreational facilities. In resource areas of environmental zones, public trails, rest points, public viewing areas, and interpretative facilities will be approved if the applicant's impact evaluation demonstrates that all of the following are met: 1.

Proposed development locations, designs, and construction methods are less detrimental to identified resources and functional values than other practicable and significantly different alternatives;

2.

The public benefits of the proposal outweigh all significant detrimental impacts;

3.

Areas disturbed during construction, that do not contain permanent development, will be restored with native vegetation that is similar to the vegetation existing on the site and found on the Portland Plant List; and 430‐33

Chapter 33.430 Title 33, Planning and Zoning Environmental Zones 3/1/21

4. There will be no significant detrimental impact on resources and functional values in areas designated to be left undisturbed.

D. Modification of zone boundaries. Modifications of environmental zone boundaries that reflect permitted changes in the location or quality of resource areas will be approved upon finding that the applicant's statement demonstrates that either Paragraph D.1 or D.2 below are met. For the minor modification of environmental zone boundaries based on a more detailed site specific environmental study, the applicant's impact evaluation must demonstrate that Paragraph D.3 below is met: 1.

Successful mitigation. An approved mitigation plan has been successful and a new, restored, or enhanced resource exists which, depending on its degree of significance, should be included in either the resource area of an Environmental Conservation zone or the resource area of an Environmental Protection zone; or

2.

Approved loss of resource area. All of the following must be met:

3.

E.

a.

All approved development in a resource area has been completed;

b.

All mitigation required of this development has been successful; and

c.

The identified resources and functional values at the developed site no longer exist, or have been subject to a significant detrimental impact.

The proposed environmental zone line location accurately reflects the location of the significant or highly significant resources and functional values on the site, plus 25 feet of transition area. The significant or highly significant resources are identified in the Resource Site Inventory of the relevant Environmental Study Report, see 33.430.020.

Other development in the Environmental Conservation zone or within the Transition Area only. In Environmental Conservation zones or for development within the Transition Area only, the applicant's impact evaluation must demonstrate that all of the following are met: 1.

Proposed development minimizes the loss of resources and functional values, consistent with allowing those uses generally permitted or allowed in the base zone without a land use review;

2.

Proposed development locations, designs, and construction methods are less detrimental to identified resources and functional values than other practicable and significantly different alternatives;

3.

There will be no significant detrimental impact on resources and functional values in areas designated to be left undisturbed;

4.

The mitigation plan demonstrates that all significant detrimental impacts on resources and functional values will be compensated for;

5.

Mitigation will occur within the same watershed as the proposed use or development and within the Portland city limits except when the purpose of the mitigation could be better provided elsewhere; and

430‐34

Title 33, Planning and Zoning Chapter 33.430 3/1/21 Environmental Zones

6. The applicant owns the mitigation site; possesses a legal instrument that is approved by the City (such as an easement or deed restriction) sufficient to carry out and ensure the success of the mitigation program; or can demonstrate legal authority to acquire property through eminent domain.

F.

Other development in the Environmental Protection zone. In Environmental Protection zones the applicant's impact evaluation must demonstrate that all of the following are met: 1.

All sites within the Portland city limits, in which the proposed use or development is possible, are also in the resource areas of Environmental Protection zones;

2.

Of these sites, development on the proposed site would have the least significant detrimental environmental impact;

3.

There is a public need for the proposed use or development;

4.

The public benefits of the proposed use or development outweigh all significant detrimental impacts;

5.

There will be no significant detrimental impact on resources and functional values in areas designated to be left undisturbed;

6.

The mitigation plan demonstrates that all significant detrimental impacts on resources and functional values will be compensated for;

7.

Mitigation will occur within the same watershed as the proposed use or development and within the Portland city limits except when the purpose of the mitigation could be better provided elsewhere; and

8.

The applicant owns the mitigation site; possesses a legal instrument that is approved by the City (such as an easement or deed restriction) sufficient to carry out and ensure the success of the mitigation program; or can demonstrate legal authority to acquire property through eminent domain.

G. Corrections to violations. For corrections to violations of this Chapter the application must meet all applicable approval criteria stated in subsections A through F above, and paragraphs 1, 2.b and 2.c, below. If these criteria cannot be met, then the applicant’s remediation plan must demonstrate that all of the following are met: 1.

The remediation is done in the same area as the violation; and

2.

The remediation plan demonstrates that after its implementation there will be: a.

No permanent loss of any type of resource or functional value;

b.

A significant improvement of a least one functional value; and

c.

There will be minimal loss of resources and functional values during remediation until the full remediation program is established.

33.430.260 Performance Guarantees The Director of BDS may require performance guarantees as a condition of approval to ensure mitigation or remediation. See Section 33.700.050, Performance Guarantees.

430‐35

Chapter 33.430 Title 33, Planning and Zoning Environmental Zones 3/1/21

33.430.270 Special Evaluation by a Professional A professional consultant may be hired to evaluate proposals and make recommendations if the Director of BDS finds that outside expertise is needed due to exceptional circumstances. The professional will have expertise in the specific resource or functional value or in the potential adverse impacts on the resource or functional value. A fee for these services will be charged to the applicant in addition to the application fee.

33.430.280 Modifications That Will Better Meet Environmental Review Requirements The review body may consider modifications for lot dimension standards or site‐related development standards as part of the environmental review process. The review body may not consider modifications to standards for which adjustments are prohibited. Modifications are done as part of the environmental review process and are not required to go through the adjustment process. Adjustments to use‐related development standards (such as floor‐area ratios, intensity of use, size of the use, number of units, or concentration of uses) are subject to the adjustment process of Chapter 33.805. In order to approve these modifications, the review body must find that the development will result in greater protection of the resources and functional values identified on the site and will, on balance, be consistent with the purpose of the applicable regulations. For modifications to lot dimension standards, the review body must also find that the development will not significantly detract from the livability or appearance of the area.

Natural Resource Management Plans 33.430.310 Purpose Natural resource management plans provide an alternative to case‐by‐case environmental reviews.

These plans provide the means to evaluate the cumulative effects of development and mitigation proposed at different times and in different places within the same large ecosystem. These plans are of particular value in areas of multiple ownership. These plans also provide opportunities for coordination with, or joint adoption by, other local governments; special districts; and regional state, and federal agencies.

33.430.320 Scope Natural resource management plans must cover large ecosystems such as a forests, creeks, sloughs, or watersheds. These plans must address all resources and functional values conserved and protected by environmental zones within the plan boundaries. The plan must also address all significant detrimental impacts of uses allowed by the plan.

33.430.330 Procedure Adoption and amendment of natural resource management plans is a legislative procedure.

Whenever natural resource management plan provisions conflict with other provisions of this chapter, the natural resource management plan provisions supersede. Non‐conflicting provisions supplement the provisions of this chapter.

33.430.340 Components The applicant must submit a natural resource management plan with the following components: A. Management objectives to maintain or enhance resources and functional values; B. Lists of allowed and prohibited uses; 430‐36

Title 33, Planning and Zoning 3/1/21

C. Maps of areas where these uses are allowed and prohibited;

Chapter 33.430 Environmental Zones

D. Types of mitigation or enhancement required; E.

Maps of areas reserved for these mitigation or enhancement actions;

F.

Timetables for development, mitigation, and enhancement; and

G. Procedures and criteria for approving uses.

33.430.350 Approval Criteria for Adoption and Amendment.

A natural resource management plan, or an amendment to a natural resource management plan, will be approved if it meets the following approval criteria: A. Compliance with Sections 33.430.310 through 350; B. Compliance with Statewide Planning Goals and the Portland Comprehensive Plan; and C.

If the natural resource management plan is approved as part of a plan district, the criteria for adoption of plan districts that are in Section 33.500.050 are met.

Corrections to Violations of This Chapter 33.430.400 Purpose The purpose of Sections 33.430.400 and .405 is to ensure the timely restoration and remediation of natural resources and functional values that have been degraded due to a violation of this chapter.

These sections establish a process to determine which review requirements will be applied to remedy a violation that takes place in the environmental overlay zone. The type of review required depends on the circumstances of the violation. Section 33.430.405 details methods for correcting such violations and Title 3 of the City Code details the enforcement penalties.

33.430.405 Correction Options Applicants must choose one of the following options to correct environmental code violations.

A. When these options may be used.

1.

If all of the following are met, the applicant may choose Option One, Option Two, or Option Three: a.

Tree removal: (1) Only non‐native trees have been removed; (2) No more than 12 diameter inches of native trees have been removed; or (3) No more than one of the following has been removed:  A Madrone 4 inches or less;  A Garry Oak 4 inches or less; or  A Pacific Yew 2 inches or less;

b.

The proposal will remove all illegal development; and

c.

The proposal will replant illegal clearing.

430‐37

Chapter 33.430 Title 33, Planning and Zoning Environmental Zones 3/1/21

2. If any of the following apply, the applicant may not use Option One, but may chose either Option Two or Option Three: a.

Tree removal. More than 12 diameter inches of native trees have been removed;

b.

More than one of the following has been removed: (1) A Madrone 4 inches or less; (2) A Garry Oak 4 inches or less; (3) A Pacific Yew 2 inches or less;

c.

Any of the following has been removed: (1) A Madrone larger than 4 inches; (2) A Garry Oak larger than 4 inches; or (3) A Pacific Yew larger than 2 inches.

3.

If the applicant cannot meet Options One or Two, Option Three must be used.

4.

If the violation also violates a condition of approval of a land use review and no trees have been removed, the applicant may choose Option One or the process described in Section 33.730.140. The applicant may not choose Options Two or Three.

5.

If the violation also violates a condition of approval of a land use review, and trees have been removed, the applicant must use the process described in Section 33.730.140. The applicant may not choose one of the options in this section.

B. Option One, Remove and Repair. This option results in removal of illegal development and replanting and repair of any damage. All of the requirements of this subsection must be met, and the notice and review procedure described in Sections 33.430.410 through 33.430.430 must be followed. Adjustments and modifications to these requirements are prohibited.

1.

All items and materials placed in the area of violation are removed using hand‐held equipment and no new disturbance area is created;

2.

Any soil compaction resulting from the violation is tilled or otherwise broken up to a depth of 6 inches prior to planting; and

3.

Violation remediation planting. The area to be planted is the area disturbed by the violation. All of the following must be met: a.

The area disturbed by the violation activity must be replanted;

b.

One tree, 1 shrub, and 5 groundcover plants are required to be planted for every 50 square feet of planting area. Plants must be native and selected from the Portland Plant List;

c.

A second area, equal in size to the area disturbed by the violation activity, must also be replanted as remediation, or 7 additional plants as described in B.3.b. must be planted on the site for every 50 square feet disturbed;

430‐38

Title 33, Planning and Zoning Chapter 33.430 3/1/21 Environmental Zones

d. Any plants on the Nuisance Plants List on the Portland Plant List must be removed from the planting area and within 10 feet of the planting area;

4.

C.

e.

Trees must be a minimum one‐half inch in diameter unless they are oak, madrone, or conifer, which may be 3 to 5‐gallon size. No more than 10 percent of the trees may be oak or madrone. Shrubs must be a minimum of 1‐gallon size. All other species must be a minimum of 4‐inch pots; and

f.

The requirements of Section 33.248.090, Mitigation and Restoration Planting, must be met.

For violations involving the removal of trees, three native trees must be planted on the site for each tree removed, in addition to other remediation vegetation planted. If any tree removed was a Garry Oak, Madrone, or Pacific Yew, the replacement trees must be of the same species. Planted trees must be a minimum one‐half inch in diameter unless they are oak, madrone, or conifer, which may be 3 to 5‐gallon size.

Option Two, Retain and Mitigate. This option results in legalizing the illegal development and mitigating for any damage. All of the requirements of this subsection must be met and the notice and review procedure described in Sections 33.430.410 through 33.430.430 must be followed. Adjustments and modifications to these standards are prohibited.

1.

The applicable standards of Section 33.430.140 through .190 must be met; and

2.

Violation remediation planting. The area to be planted is the area disturbed by the violation. Where development is approved for the area disturbed by the violation, an area of the same size elsewhere on the site must be planted. All of the following must be met:

3.

a.

The area disturbed by the violation activity must be replanted;

b.

One tree, 1 shrub, and 5 groundcover plants are required to be planted for every 50 square feet of planting area. Plants must be native and selected from the Portland Plant List.

c.

A second area, equal in size to the area disturbed by the violation activity, must also be replanted as remediation, or 7 additional plants as described in C.2.b must be planted on the site for every 50 square feet disturbed;

d.

Any plants on the Nuisance Plants List on the Portland Plant List must be removed from the planting area and within 10 feet of the planting area;

e.

Trees must be a minimum one‐half inch in diameter unless they are oak, madrone, or conifer, which may be 3 to 5‐gallon size. No more than 10 percent of the trees may be oak or madrone. Shrubs must be a minimum of 1‐gallon size. All other species must be a minimum of 4‐inch pots; and

f.

The requirements of Section 33.248.090, Mitigation and Restoration Planting, must be met.

For violations involving the removal of trees, three native trees must be planted on the site for each tree removed, in addition to other remediation vegetation planted. If any tree removed was a Garry Oak, Madrone, or Pacific Yew, the replacement trees

430‐39

Chapter 33.430 Title 33, Planning and Zoning Environmental Zones 3/1/21

must be of the same species. Planted trees must be a minimum one‐half inch in diameter unless they are oak, madrone, or conifer, which may be 3 to 5‐gallon size.

D. Option Three, Environmental Review. This option requires Environmental Review, using the approval criteria and procedures below: 1.

Approval criteria. The approval criteria of Subsection 33.430.250.G must be met.

2.

Review procedures. Reviews are processed as follows: a.

Type III. The following situations require a Type III review: (1) The removal of trees that exceeds the quantity of environmental standard 33.430.140.J. (2) Any development, exterior alteration, or exterior improvement within a wetland, stream channel, drainageway, or waterbody.

b.

Type II. All other environmental reviews to correct environmental code violations are processed through a Type II procedure.

c.

All environmental reviews must provide the information required in Section 33.430.240, Supplemental Application Requirements.

33.430.407 Recurring Violations of This Chapter A. Recurring violations on a site. Sites where there have been more than one environmental violation while in the same ownership may be subject to fines under Title 3.

B. Recurring violations by an individual or business. Individuals or businesses who have committed more than one environmental violation may be subject to fines under Title 3.

Notice and Review Procedure 33.430.410 Purpose The purpose of this notice and review procedure is to notify the public of the permit review process for development proposed in areas having identified significant resources and functional values.

33.430.420 When These Regulations Apply These regulations apply when a building permit or development permit application is requested within the resource area of the environmental conservation zone and is subject to the Development Standards of Section 33.430.110 through .190, 33.430.405.B, or 33.430.405.C. These regulations do not apply to building permit or development permit applications for development that has been approved through environmental review.

33.430.430 Procedure Applications for building permits or development permits as specified in Section 33.430.420 will be processed according to the following procedures: A. Application. The applicant must submit a site plan with an application for a permit. The site plan must contain all information required by 33.430.130, Permit Application

430‐40

Title 33, Planning and Zoning Chapter 33.430 3/1/21 Environmental Zones

Requirements, and any additional information required for a building permit or development permit review.

B. Notice of an application.

1.

C.

Notice on website. Upon receipt of a complete application for a building or development permit, the Director of BDS will post a notice of the application on the BDS website and mail a notice of the request to all recognized organizations within 400 feet of the site. The posted notice of the application will contain at least the following information: 

A statement that a building or development permit has been applied for that is subject to the Development Standards of Section 33.430.110 through .190, 33.430.405.B, or 33.430.405.C.



The legal description and address of the site;



A copy of the site plan;



The place where information on the matter may be examined and a telephone number to call; and



A statement that copies of information on the matter may be obtained for a fee equal to the City’s cost for providing the copies.

The notice will remain on the website until the permit is issued and administrative decision is made, or until the application is withdrawn.

2.

E‐mailed notice to recognized neighborhood associations. At the time a notice is posted on the BDS website, the Director of BDS will e‐mail information about the internet posting to all recognized neighborhood associations and neighborhood coalition offices within 400 feet of the site. When an e‐mail address is not available, the notice will be mailed to the neighborhood association and coalition office.

Posting the site and marking development. The applicant must post notice information on the site and identify disturbance areas as specified below.

1.

Posting notice on the site. The applicant must place a public notice about the request on the site when the application is deemed complete by the Bureau of Development Services. A posted notice must be placed on each frontage of the site. If a frontage is over 600 feet long, a notice is required for each 600 feet, or fraction thereof. Notices must be posted within 10 feet of a street lot line and must be visible to pedestrians and motorists. Notices may not be posted in a public right‐of‐way. The posted notice will contain the same information as the notice posted on the internet.

2.

Marking proposed development on site. Prior to inspection of the site, the applicant will mark all trees over six inches diameter to be removed on the site and the building and pavement outlines with high visibility tape. The extent of the disturbance area must be marked with orange construction fencing or similar highly visible material. For corrections to violations, the disturbance area and remediation area to be planted must be identified with high visibility tape or similar high visibility material.

430‐41

Chapter 33.430 Title 33, Planning and Zoning Environmental Zones 3/1/21

D. Site inspection. A BDS inspector will inspect the site prior to issuance of the permit and will provide the Director of BDS with one of the following: 1.

An inspection report that confirms the accuracy of the site plan and conformance with the applicable development standards; or

2.

A check sheet identifying the deficiencies in the plan. Deficiencies must be corrected before a building permit is approved, or they may be addressed through environmental review as described in Sections 33.430.210 through 33.430.280.

E.

Comments. Any interested person may comment on the permit application by writing and specifically identifying errors or non‐compliance with development standards.

F.

Response to comments. If a comment is received, the Director of BDS will respond in writing or in a manner suitable to the comment. The response will specifically address each comment that concerns compliance with the development standards of Section 33.430.140 through .190. The Director of BDS will recheck permits for compliance with development standards and approve the permit if compliance is reaffirmed or when identified deficiencies are corrected, and when all applicable standards and regulations of the Zoning Code are met.

(Amended by: Ord. No. 167293, effective 1/19/94; Ord. No. 168698, effective 4/17/95; Ord. No. 169375, effective 10/4/95; Ord. No. 171219, effective 7/1/97; Ord. No. 171260, effective 7/12/97; Ord. No. 171740, effective 11/14/97; Ord. No. 173015, effective 2/12/99; Ord. No. 174263, effective 4/15/00; Ord. Nos. 175965 and 176333, effective 7/1/02; Ord. No. 177422, effective 6/7/03; Ord. No. 178509, effective 7/16/04; Ord. No. 178657, effective 9/3/04; Ord. No. 178961, effective 6/13/05; Ord. No. 179540, effective 9/26/05; Ord. No. 180619, effective 12/22/06; Ord. No. 181357, effective 11/9/07; Ord. No. 183598, effective 4/24/10; Ord. No. 183534, effective 7/1/10; Ord. No. 184235, effective 11/26/10; Ord. No. 183534 and Ord. No. 184524, effective 7/1/11; Ord. No. 184944, effective 11/18/11; Ord. No. 185915, effective 5/1/13; Ord. No. 184944, effective 12/31/13; Ord. No. 186639, effective 7/11/14; Ord. No. 186053, effective 1/1/15; Ord. No. 187216, effective 7/24/15; Ord. No. 188177, effective 5/24/18; Ord. No. 188958, effective 5/24/18; Ord. No. 189002, effective 7/9/18; Ord. No. 190023, effective 8/10/20; Ord. No. 190241, effective 3/1/21.)

430‐42

Title 33, Planning and Zoning 8/1/21

Chapter 33.418 Constrained Sites Overlay Zone

Chapter 33.418 Constrained Sites Overlay Zone

418 Sections: 33.418.010 Purpose 33.418.020 Map Symbol 33.418.030 Applying the Constrained Sites Overlay Zone 33.418.040 Housing Type Limitations

33.418.010 Purpose Under some circumstances, up to four dwelling units is allowed per lot in the R7, R5 and R2.5 zones. The Constrained Sites overlay zone reduces that development potential on lots that have certain development constraints. The constraints make the lots unsuitable for three or more dwelling units.

33.260.020 Map Symbol The Constrained Sites overlay zone is shown on the Official Zoning Maps with the letter “z” map symbol.

33.260.030 Applying the Constrained Sites Overlay Zone The Constrained Sites overlay zone is applied to lots in the R7, R5 and R2.5 zones when any portion of the lot has one of the following constraints: A.

Low, medium, or high value natural resource as shown on the City’s Natural Resources Inventory;

B.

Special flood hazard area;

C.

Floodway;

D.

1996 Flood Inundation area;

E.

Potential Rapidly Moving Landslide Hazard Zones as shown in the DOGAMI IMS-22 publication;

F.

Deep landslide—High Susceptibility or Landslide Deposit or Scarp as shown in the DOGAMI IMS-57 publication.

33.418.040 Residential Infill and ADU Limitations The following residential infill and accessory dwelling unit options do not apply in the Constrained Sites overlay zone: A.

33.110.265.E which allows triplexes and fourplexes in the R7 through R2.5 zones;

B.

33.110.265.F which allows fourplexes and multi-dwelling structures with up to six dwelling units in the R7 through R5 zones;

C.

33.205.020.B.2 which allows two accessory dwelling units on a site with a house, attached house, or manufactured home in the R7 through R2.5 zones; and

D.

33.205.020.B.3 which allows an accessory dwelling unit on a site with a duplex in the R7 through R.25 zones.

418-1

Chapter 33.418 Constrained Sites Overlay Zone

Title 33, Planning and Zoning 8/1/21

(Added by: Ord. No. 190093, effective 8/1/21.)

418-2

Residential Infill Project Summary RECOMMENDED DRAFT Shaping the future of our neighborhoods together Portland’s neighborhoods have always been places of change. So it’s important to work together as a community to make sure that change is for the better and benefits all of us.

By 2035, Portland will grow by more than 100,000 households. The city’s popularity, changes in housing demand and other factors have resulted in a housing shortage that has driven up housing costs. Also, housing market changes have made it more attractive to construct large, expensive new houses in older residential neighborhoods — even as the number of people per household is getting smaller.

To address these issues around growth and change, the City of Portland is taking a look at the rules that determine the types of housing allowed in our neighborhoods.

As Portlanders, we have an opportunity to update the rules that shape our residential neighborhoods so that more people can live in them, while limiting the construction of very large new houses.

This proposal would allow more housing units to be built in residential neighborhoods, but only if they follow new limits on the size of new buildings.

How this project is organized This project addresses these concerns through the following topics:

Added ADU

Duplex

Triplex

Fourplex

Housing Options and Scale

Building Design

These proposals would add more housing options to meet people’s changing needs.

This provides a summary of the key elements in the Planning and Sustainability Commission’s recommendation but is not intended to reflect all the recommended changes. For more detail, please review the full Recommended Draft.

August 2019

www.portlandoregon.gov/bps/infill

HOUSING OPTIONS AND SCALE 1. Allow for more housing types (R7, R5 and R2.5 zones).

HOUSING OPTIONS AND SCALE

a. Allow for duplexes, triplexes and fourplexes. b. Allow a house to have two accessory dwelling units (ADUs) or a duplex to have one ADU. c. Limit lots with the following constraints to a house plus one ADU or a corner lot duplex: x

100-year floodplain

x

Areas identified in the natural resource inventory (NRI)

x

Landslide hazard areas

x Unpaved streets d. Set a minimum lot size for lots with 1 or 2 units and a larger lot size for lots with 3 or 4 units.

2. Limit the overall size of buildings (R7, R5 and R2.5 zones). a. Set a total maximum building size, measured by floor-to-area ratio (FAR), that is less than what is achievable today. b. Scale the FAR to increase as the number of units increases on the site. c. Exclude attics and basements from FAR. d. Allow a bonus increase in FAR on the site if: x

At least one of the units is affordable (80% median family income); or

x

Units are added to a site with an existing house and the street-facing facade of the house remains substantially unaltered. e. Allow existing houses to add up to 250 sq ft every 5 years, regardless of building size limit.

2

Max. size house allowed on a 5,000 sq. ft. R5 lot PAGE 2 | Residential Infill Project – Recommended Draft Summary

HOUSING OPTIONS AND SCALE HOUSING OPTIONS AND SCALE

3. For 3 or 4 units, at least 1 unit must be visitable (R7, R5 and R2.5 zones). The visitable unit must have a no step entry, wider doorways, with a bathroom and living area on the ground floor.

4. Require at least 2 dwelling units when developing a vacant double-sized lot (R7, R5 and R2.5 zones).

5. Rezone half of the historically narrow lots from R5 to R2.5. Allow the remainder of the historically narrow lots in the R5 zone to be built with pairs of attached houses.

6. Allow small flag lots through property line adjustments (R5 and R2.5 zones). a. Require that the existing house be retained and exempt from FAR limits at the time of the property line adjustment review. b. In the R5 zone, limit the height of the house on the flag lot to 20 feet, limit its size to 1,000 square feet and require additional exterior design elements.

7. Continue to allow different building forms and site arrangements through a planned development review (R7, R5, and R2.5 zones). Align density allowances and review procedure thresholds between planned developments and land divisions.

1

House + ADU

House + 2 ADUs

3

Barrier-free entry

Triplex

Duplex

Fourplex

Duplex + ADU

6

Small flag lot

7

Planned development August 2019 | PAGE 3

The Residential Infill Project 1c

Legend ‘z’ Constrained Sites Overlay Zone (Additional housing types not allowed)

R7, R5, R2.5 Base Zones (Additional housing types allowed)

RF, R20, R10 Base Zones (Additional housing types not allowed) PAGE 4 | Residential Infill Project – Recommended Draft Summary

Proposed New ‘z’ Overlay Zone

Where additional housing types may be allowed

Lots with the proposed ‘z’ overlay are constrained by natural hazards or natural resources and are not eligible for the additional housing types shown in Proposal #1. The ‘z’ overlay does not reflect lots that do not meet minimum lot size requirements or lots on unmaintained streets. Searchable parcel-specific information is available through the interactive Map App. www.portlandoregon.gov/bps/infill/mapapp August 2019 | PAGE 5

BUILDING DESIGN 8. Revise how height is measured (all zones). a. Measure height from the lowest point near the house, not the highest point. b. Exclude small dormers from the height measurement calculation. c. Continue to allow 2-½ story houses (30 feet high) on standard lots.

BUILDING DESIGN

9. Address building features and articulation. a. Limit how high the front door can be above the ground (exempt lots in floodplains). b. Allow eaves to project up to 2 feet into setbacks. c. Allow the front door of each corner lot duplex unit to face the same street.

10. Provide greater flexibility for Accessory Dwelling Unit (ADU) design. a. Maintain current ADU size allowances. b. Allow basement ADU conversions to exceed the 800 square feet/75%-size cap in an existing house. c. Allow the front door of an internal ADU to face the street.

11. Modify parking rules. a. b. c. d.

Eliminate minimum parking requirements for residential uses in single-dwelling zones.

Require that lots on alleys use alleys for parking access.

Limit the width of street-facing garages to 50% or less of the building façade.

Incorporate changes from the Better Housing by Design project by prohibiting parking between the front of the building and the street.

12. Improve building design on lots less than 32 feet wide. a. Limit the height of a detached house to 1-½ times its width. b. Require attached houses on lots 25 feet wide and narrower.

9a

9b

Larger eave projections would be allowed

11b

Example of a pair of attached houses on 25-foot-wide lots

Park Par Pa P ak

8a 30഻ 30഻

Park arrk

Park Par Pa P ak

Park Par Pa P aarrk

Park

Park rkk

Park

Park

Park

Alley

Tall flights of stairs to the front door would no longer be allowed

12b

Park Pa Par P aarrk

Park Par ark ar

Parkk P Pa

Park Par P Pa aarrk

Park Pa Par P aarrk

Current height measurement

PAGE 6 | Residential Infill Project – Recommended Draft Summary

Proposed height measurement

Proposed Base Zone Map Changes (R5 to R2.5) 5

12a

5

Smaller, shorter detached houses allowed on 26- to 32-foot-wide lots August 2019 | PAGE 7

Residential Infill Project | LEARN MORE Phase I: Concept Development The concepts for these proposals were developed in Phase I, which took place in 2015 and 2016. In addition to the engagement of the 26-member Stakeholder Advisory Committee, more than 7,000 people participated in an online questionnaire during Phase I. After hearing public testimony, City Council unanimously accepted the Residential Infill Project Concept Report with amendments in 2016.

Phase II: Code and Map Amendments Staff received more than 3,700 comments on the Discussion Draft, which helped refine the Proposed Draft. The Proposed Draft includes the Zoning Code and Zoning Map amendments to implement the concepts from Phase I. A Revised Proposed Draft was developed as a result of changes that the Planning and Sustainability Commission directed in response to testimony and to further advance the goals and policies in the Comprehensive Plan.

The Recommended Draft During two public hearings in May 2018, the Planning and Sustainability Commission heard from more than 130 people and received more than 1,200 written pieces of testimony. In response to this public testimony, the Commission held eight work sessions with staff between June and September, resulting in several key changes from the original Proposed Draft that were incorporated into a Revised Proposed Draft. On March 12, 2019 the Commission voted to recommend City Council adopt the amendments in the Recommended Draft, summarized here and available on the project website.

Learn more Visit our project website and the interactive Map App on any computer, tablet or smart phone. ϭ͘ Project website: www.portlandoregon.gov/bps/infill Get the latest news, view documents and more. Ϯ͘ Map App: www.portlandoregon.gov/bps/infill/mapapp Learn how the proposals may affect individual properties across Portland. Type in the property address to see proposed changes that may affect your property.

3. Ask staff a question. Call 503-823-6879 or email us at residential.infill@portlandoregon.gov.

Next steps The Recommended Draft will be forwarded to City Council for additional public testimony and hearings, deliberations, possible amendments and a vote.

The Recommended Draft is tentatively scheduled to be heard by City Council in ĞĐember 2019. Check the project website for the latest information, or sign up to stay informed through monthly e-updates: www.portlandoregon.gov/bps/article/555758

City of Portland Bureau of Planning and Sustainability | Recommended Draft, August 2019

EM FR

RD BU TT E

RO

RA MP

CK Y

R U T O C KY TE LN

4F WY WY -I8 5F I 20 NE

NE I84 F W Y-I2 05 FW Y RA M P

E

R5

R7 Y CK RO

NE RUSS E LL PL

RD TTE BU

R3

380 Feet

Y RAM 05 FW NE S A CRA M

R5

ENTO S

T

FWY-I2

R7

N E I 84

NE SACRAMENTO ST

NE 93RD AVE

NE 90TH AVE

NE BRAZEE ST

P

NE RUSSELL ST

NE 88TH AVE 190

OS

NE

95

DR

R1

Customer Service Department 12909 SW 68th Parkway, Suite 350 Portland, OR 97223 (503) 603-1700 cs@wfgnationaltitle.com 0

R5

T

²

ON

OS

AV E NE 92ND

NE

EG2

N

NE ROCKY BUTT E RD

NE 88TH AVE

Single Family

N

88TH PL

R1

NE 89TH AVE

SK SI

NE B

E

Parks & Open Spaces

NE

U ST O Y I

RAM P

Multi Family

N E ROCKY B UTTE RD

NE HILL WAY

Tax Lots

Commercial

NE CA DE T

NE 87TH PL

Subject Property

R7 WY 205 F F W Y-I NE I84

NE DYER ST

AV E

NE 88TH AVE

Zoning

NE DUDDLESON ST

R5

This map is a copy of public record and is provided solely for information purposes. WFG National Title assumes no liability for variations, if any, in dimensions, area or location of the premises or the location of improvements.

530

420

Contours

525

515 430

Tax Lots

500

49 0

0 39

245 250 240 235 230 225

255

26 5

240

250

260

270

290

310

300

230

510

220 51 0

490

480

535

510

420

0 52

5 25

430

320

0 26

0 27 0 26

410

490

270

275

0 47

540

285

530

This map is a copy of public record and is provided solely for information purposes. WFG National Title assumes no liability for variations, if any, in dimensions, area or location of the premises or the location of improvements.

280

470

420

280

530

520

440

430

285

370

480

525

350

515

520 RD

RD

E TT

0 48

BU

52 0

0 29

350

435

475

280

285

36 0

280

275

270

33 0

32 0

480

470

460

455

435

420

345

440

470

5 29 5 30 5 31 0 31 0 32 5 32 0 34 5 33 5 34 0 35 60 0 3 37 5 37 85 3 5 36

400

0 38

5 39 405 410 420

455

425 440 450

460

Y

485

CK

0 29

290

0 33

400 415

430 445

465

490

315

390

450

470

500

RO

TE K Y B UT NE ROC

0 51

0 49

NE

30 0

35 5

52 0

295

280

26 5

34 0

0 37

475 495

500

0 48

0 41

300

0 30 250

260

41 0

470

490

460

310

NE ROCKY BUTT E RD

0 42

505

495

0 50

485

5 41 5 39

335

305

120 Feet

465

0 45 0 43

0 40

0 38

340

310

60

450

440

400

320

30

250

0

CK Y NE RO RD E B U TT

Customer Service Department 12909 SW 68th Parkway, Suite 350 Portland, OR 97223 (503) 603-1700 cs@wfgnationaltitle.com

460

445

425

405 390 380 390 385 0 37 375 350 360 365 340 330 350 355

330 325

²

38 0

0 43

480

5' Contours

510

505

320

Subject Property

510

520

520

ON T DR

RD

RA MP 4F WY WY -I8 5F I 20 NE

05 FW

RD TTE BU

Y RAM

P

Y CK RO

380 Feet

NE SACRAMENTO ST

N E I 84

NE 93RD AVE

NE 90TH AVE

NE BRAZEE ST

FWY-I2

NE RUSSELL ST

NE 88TH AVE 190

BU TT E

NE

95

CK Y

RO

EM FR

AV E NE 92ND

NE NE RUSS E LL PL

Customer Service Department 12909 SW 68th Parkway, Suite 350 Portland, OR 97223 (503) 603-1700 cs@wfgnationaltitle.com 0

R U T O C KY TE LN

E

E

N

NE I84 F W Y-I2 05 FW Y RA M P

NE 88TH AVE

²

N E ROCKY B UTTE RD N

88TH PL

SK SI

NE B

RAM P

Rivers

NE

U ST O Y I

NE ROCKY BUTT E RD

Flood Plain Wetlands

NE CA DE T NE HILL WAY

NE 89TH AVE

Streams

NE 87TH PL

Subject Property

WY 205 F F W Y-I NE I84

NE DYER ST

Tax Lots

AV E

NE 88TH AVE

Flood Plain

NE DUDDLESON ST

NE S A CRA M

ENTO S

T

This map is a copy of public record and is provided solely for information purposes. WFG National Title assumes no liability for variations, if any, in dimensions, area or location of the premises or the location of improvements.

Aerial Subject Property Tax Lots

TE K Y B UT NE ROC RD

² Customer Service Department 12909 SW 68th Parkway, Suite 350 Portland, OR 97223 (503) 603-1700 cs@wfgnationaltitle.com 0

30

60

120 Feet

This map is a copy of public record and is provided solely for information purposes. WFG National Title assumes no liability for variations, if any, in dimensions, area or location of the premises or the location of improvements.

Aerial Topo

530 525

520

5 51

Tax Lots

510 505

Subject Property

245 250 240 235 230 225

255

285

510 515

520

440

420

470

35 5

30 0

0 29

475

5 29 5 30 5 31 0 31 0 32 5 32 0 34 5 33 5 34 0 35 60 0 3 37 5 37 5 36

0 0 38 39

450

435

490

5 39 405 410 420

425 440

465

500

Y

460

CK

485

RO

RD

RD

305

E TT

0 48

BU

TE K Y B UT NE ROC

0 49

NE

0 46

310

0 30

290 295

285

0 33

385

400 415

430 445

470

500

0 48

5 45

315

455

475 495

495

485

465

320

²

505

385

330 325

0 410 450 445 43 5 5 40 42 435 0 40 415 395 0 38 390 375 370 365 360 355 350 345 335

340

280

275

270

26 5

NE ROCKY BUTT E RD

260

5' Contours

52 0 525

530

280 535

280 0 26

120 Feet

70 275 2

60

255

250

30

CKY NE RO RD B UTTE

0

285

5 26

Customer Service Department 12909 SW 68th Parkway, Suite 350 Portland, OR 97223 (503) 603-1700 cs@wfgnationaltitle.com

This map is a copy of public record and is provided solely for information purposes. WFG National Title assumes no liability for variations, if any, in dimensions, area or location of the premises or the location of improvements.

Community

Mannahouse Christian Academy

Tax Lots

Portland Bible College

MAYWOOD PARK PARKROSE

Subject Property

8 9 s : o n m n { n

Fire Stations

ROSEWAY

Hospitals Schools Libraries Neighborhoods Rivers Park MADISON SOUTH

Frog Song Montessori Preschool ROSEWAY/MADISON SOUTH

²

Crossroads Christian

Jason Lee Elementary

Customer Service Department 12909 SW 68th Parkway, Suite 350 Portland, OR 97223 (503) 603-1700 cs@wfgnationaltitle.com 0

210

420

PARKROSE HEIGHTS

840 Feet

Creative Minds Learning Centers - Broadway

WOODLAND PARK

This map is a copy of public record and is provided solely for information purposes. WFG National Title assumes no liability for variations, if any, in dimensions, area or location of the premises or the location of improvements.

RA M

NE 105TH AVE

FW

Y

TTE RD

NE 103RD PL

NE I84 FW NE Y-I20 5 FW Y RA MP 10 NE F W 2ND I84 A Y RA VEF MP I84 NE 102ND AVE W YFA RG FRONTA GE RD NE 102ND AVE O ST NE 102ND AVE R F RONTAGE RD

NE I84 FW Y-I2 05 FW Y RA MP

BU

NE

RO CK Y

O C TE K Y LN

NE FARGO ST

CT IS NE M O R R NE MORRIS ST

NE 105TH AVE

NE 104TH AVE

NE 93RD AVE

NE BRAZEE ST

Gateway Green

NE SACRAMENTO ST NE THOMPSON ST

NE 95TH PL

NE THOMPSON ST

NE HA NCOCK DR

NE TILLAMOOK S T

ELL EB DR

NE 104TH AVE

NE 91ST AVE

NE 90TH AVE

NE 88TH AVE

NE I20 5F WY -I8 4

AV E

NE ROCKY BUTTE RD

NE SA CRA M ENTO ST

NE 90TH AVE

NE 86TH AVE

P

N

NE 86TH AVE

NE 88TH AVE

NE 84TH AVE NE 84TH NE 84TH AVE AVE

AM

NE H AVE 105T

NE HANCOCK ST

P

RD TTE BU

640 Feet

NE I84 FWY-I205 FWY RAMP

P

NE RUSS ELL CT

Rocky Butte Natural Area

NE TILLAMOOK ST

Hancock Park

NE FREMONT ST

RA M P

NE KNOTT ST

NE THOMPSON ST NE EUGENE ST

Y

Y CK RO

NE RUSSELL ST

NE BRAZEE ST

FW

NE

AV E

320

Rocky Butte State Scenic Corridor

Rocky Butte Natural Area

NE SACRAMENTO ST

Customer Service Department 12909 SW 68th Parkway, Suite 350 Portland, OR 97223 (503) 603-1700 cs@wfgnationaltitle.com

NE CA DE T

NE 87TH PL

NE 88TH AVE NE 89TH AVE

NE 86TH AVE

NE 85TH AVE

NE 84TH AVE

NE 83RD AVE

2ND NE 9

NE KNOTT ST

² 160

NE 91ST AVE

NE 90TH AVE

NE 88TH AVE

NE 87TH AVE

NE 8 8TH PL

Rocky Butte Natural Area

NE RUS S ELL PL

PL

NE 88TH AVE

Park

D

DR

OHSU Tram

O

Rocky Butte Natural Area

I2 Y-

R T NE BU

NT

Light Rail

S SI

NE

U ST YO I K

FW

O EM FR

NE SISKIYOU ST

NE HILL WAY

NE

Bus Lines

Joseph Wood Hill Park

NE DYER ST

O W AY

Transit Centers Bike Routes

0

M

£ n

Park & Ride

NE KLICKITAT ST

I84

ü Æ

Light Rail Stops

RA M

Y

X

NE DUDDLESON ST

Rocky Butte Natural Area

05

FW

Bus Stops

IN AM NJ BE AVE

NE BOEHMER ST

4 I8 Y-

NE

Subject Property

NE

NE FREMONT ST

Tax Lots X

FW I205 NE

NE 85TH AVE

NE MILTON ST

NE

Transit

NE BEECH ST

This map is a copy of public record and is provided solely for information purposes. WFG National Title assumes no liability for variations, if any, in dimensions, area or location of the premises or the location of improvements.

AV E

EM FR

AV E NE 92ND

NE ON T DR

RD BU TT E

RA MP Rocky Butte State Scenic Corridor

4F WY WY -I8 5F I 20 NE

NE

Y RAM 05 FW

RD TTE BU

Rocky Butte Natural Area

P

Y CK RO

380 Feet

NE SACRAMENTO ST

N E I 84

NE 93RD AVE

NE 90TH AVE

NE BRAZEE ST

FWY-I2

NE RUSSELL ST

NE 88TH AVE 190

CK Y

RO E

E

N

NE I84 F W Y-I2 05 FW Y RA M P

NE 88TH AVE

95

N E ROCKY B UTTE RD

NE CA DE T Rocky Butte Natural Area

NE RUSS E LL PL

Customer Service Department 12909 SW 68th Parkway, Suite 350 Portland, OR 97223 (503) 603-1700 cs@wfgnationaltitle.com 0

N

Rocky Butte Natural Area

88TH PL

SK SI

NE B

RAM P

NE

U ST O Y I

R U T O C KY TE LN

Park

²

Rocky Butte Natural Area

NE ROCKY BUTT E RD

Vacant Lots

Joseph Wood Hill Park

NE HILL WAY

NE 89TH AVE

Subject Property

NE 87TH PL

NE DYER ST

Tax Lots

Rocky Butte Natural Area

WY 205 F F W Y-I NE I84

NE 88TH AVE

Vacant

NE DUDDLESON ST

Rocky Butte Natural Area

NE S A CRA M

Gateway Green

ENTO S

T

This map is a copy of public record and is provided solely for information purposes. WFG National Title assumes no liability for variations, if any, in dimensions, area or location of the premises or the location of improvements.

Crime Report

R230465 Sitewise Online Demographics Pop-Facts: Population Quick Facts Population 2026 Projection 2021 Estimate 2010 Census 2000 Census Growth 2021-2026 Growth 2010-2021 Growth 2000-2010

R230465, Portland, OR 97220 0 - 1 mi 16,914 16,265 15,187 14,485 3.99% 7.10% 4.85%

2021 Est. Population by Age Age 0 to 4 Age 5 to 9 Age 10 to 14 Age 15 to 17 Age 18 to 20 Age 21 to 24 Age 25 to 34 Age 35 to 44 Age 45 to 54 Age 55 to 64 Age 65 to 74 Age 75 to 84 Age 85 and over

16,265 907 938 922 492 568 716 2,458 2,596 2,144 1,909 1,537 670 408

Age 16 and over Age 18 and over Age 21 and over Age 65 and over 2021 Est. Median Age

13,337 13,006 12,439 2,615 39.36

2021 Est. Average Age

40.12

5.57% 5.77% 5.67% 3.03% 3.49% 4.40% 15.11% 15.96% 13.18% 11.74% 9.45% 4.12% 2.51% 82.00% 79.97% 76.48% 16.08%

R230465 Sitewise Online Demographics Pop-Facts: Population Quick Facts 2021 Est. Population by Single-Classification Race White Alone Black or African American Alone American Indian and Alaska Native Alone Asian Alone Native Hawaiian and Other Pacific Islander Alone Some Other Race Alone Two or More Races 2021 Est. Population by Ethnicity (Hispanic or Latino) Hispanic or Latino Not Hispanic or Latino 2021 Est. Population by Sex Male Female Copyright © Claritas, LLC 2021. All rights reserved.

R230465, Portland, OR 97220 0 - 1 mi 16,265 10,100 62.09% 1,786 10.98% 234 1.44% 2,001 12.30% 135

0.83%

828 1,182

5.09% 7.27%

16,265 1,837 11.29% 14,428 88.71% 16,265 7,957 48.92% 8,308 51.08%

R230465 Sitewise Online Demographics Pop-Facts: Household Quick Facts

R230465, Portland, OR 97220 0 - 1 mi

Households 2026 Projection 2021 Estimate 2010 Census 2000 Census

6,767 6,504 6,065 5,542

Growth 2021-2026 Growth 2010-2021 Growth 2000-2010

4.04% 7.24% 9.45%

2021 Est. Households by Household Income

6,504

Income Less than $15,000 Income $15,000 to $24,999 Income $25,000 to $34,999 Income $35,000 to $49,999 Income $50,000 to $74,999 Income $75,000 to $99,999 Income $100,000 to $124,999 Income $125,000 to $149,999 Income $150,000 to $199,999 Income $200,000 to $249,999 Income $250,000 to $499,999 Income $500,000 or more 2021 Est. Average Household Income

$

469 494 397 952 1,112 819 699 581 540 217 176 46 91,504

2021 Est. Median Household Income

$

71,114

White Alone Black or African American Alone American Indian and Alaska Native Alone Asian Alone

$ $ $ $

77,671 45,825 52,360 76,047

Native Hawaiian and Other Pacific Islander Alone

$

62,633

Some Other Race Alone Two or More Races

$ $

68,793 75,036

Hispanic or Latino Not Hispanic or Latino

$ $

62,865 72,331

7.22% 7.60% 6.11% 14.64% 17.10% 12.59% 10.75% 8.94% 8.31% 3.34% 2.71% 0.71%

2021 Median HH Inc. by Single-Classification Race

2021 Est. Households by Household Type Family Households Nonfamily Households 2021 Est. Group Quarters Population

6,504 3,750 57.66% 2,754 42.34% 408

R230465 Sitewise Online Demographics Pop-Facts: Household Quick Facts

R230465, Portland, OR 97220 0 - 1 mi

2021 Est. Households by Household Size

6,504

1-person 2-person 3-person 4-person 5-person 6-person 7-or-more-person 2021 Est. Average Household Size

2,017 2,112 1,037 720 320 156 143 2.44

31.01% 32.47% 15.94% 11.08% 4.91% 2.39% 2.19%

R230465 Sitewise Online Demographics Pop-Facts: Household Quick Facts 2021 Est. HHs by Type by Presence of Own Children Married-Couple Family, own children Married-Couple Family, no own children Male Householder, own children Male Householder, no own children Female Householder, own children Female Householder, no own children Copyright © Claritas, LLC 2021. All rights reserved.

R230465, Portland, OR 97220 0 - 1 mi 3,750 1,029 1,477 143 191 483 426

27.45% 39.37% 3.82% 5.11% 12.88% 11.37%

R230465 Sitewise Online Demographics Pop-Facts: Demographic Snapshot (Part 1) Population 2026 Projection 2021 Estimate 2010 Census 2000 Census Growth 2021-2026 Growth 2010-2021 Growth 2000-2010 2021 Est. Population by Single-Classification Race White Alone Black or African American Alone American Indian and Alaska Native Alone Asian Alone Native Hawaiian and Other Pacific Islander Alone Some Other Race Alone Two or More Races

R230465, Portland, OR 97220 0 - 1 mi 16,914 16,265 15,187 14,485 3.99% 7.10% 4.85% 16,265 10,100 62.09% 1,786 10.98% 234 1.44% 2,001 12.30% 135

0.83%

828 1,182

5.09% 7.27%

2021 Est. Population Hispanic or Latino by Origin

16,265

Not Hispanic or Latino Hispanic or Latino Hispanic or Latino by Origin Mexican Puerto Rican Cuban All Other Hispanic or Latino

14,428 1,837 1,837 1,313 56 107 360

2021 Est. Hisp. or Latino Pop by Single-Classification Race White Alone Black or African American Alone American Indian and Alaska Native Alone Asian Alone Native Hawaiian and Other Pacific Islander Alone Some Other Race Alone Two or More Races

88.71% 11.29% 71.50% 3.07% 5.84% 19.60%

1,837 628 34.18% 72 3.90% 56 3.03% 11 0.60% 3

0.18%

801 43.61% 266 14.49%

R230465 Sitewise Online Demographics Pop-Facts: Demographic Snapshot (Part 1) 2021 Est. Pop by Race, Asian Alone, by Category Chinese, except Taiwanese Filipino Japanese Asian Indian Korean Vietnamese Cambodian Hmong Laotian Thai All other Asian Races, including 2 or more

R230465, Portland, OR 97220 0 - 1 mi 2,001 100 5.00% 139 6.95% 80 4.00% 15 0.76% 123 6.14% 1,134 56.67% 22 1.12% 41 2.05% 162 8.12% 63 3.17% 121

6.02%

2021 Est. Population by Ancestry Arab Czech Danish Dutch English French (except Basque) French Canadian German Greek Hungarian Irish Italian Lithuanian Norwegian Polish Portuguese Russian Scottish Scotch-Irish Slovak Subsaharan African Swedish Swiss Ukrainian United States or American Welsh West Indian (except Hisp. groups) Other Ancestries Ancestry Unclassified

16,265 48 0.29% 26 0.16% 73 0.45% 358 2.20% 1,224 7.53% 360 2.22% 103 0.64% 2,010 12.36% 18 0.11% 19 0.11% 1,194 7.34% 411 2.53% 12 0.07% 541 3.33% 384 2.36% 26 0.16% 156 0.96% 402 2.47% 154 0.95% 3 0.02% 128 0.78% 372 2.29% 97 0.59% 84 0.51% 716 4.40% 138 0.85% 30 0.18% 5,379 33.07% 1,800 11.07%

2021 Est. Pop Age 5+ by Language Spoken At Home

15,358

Speak only English

11,614 75.62%

R230465 Sitewise Online Demographics Pop-Facts: Demographic Snapshot (Part 1) Speak Asian or Pacific Island Language Speak IndoEuropean Language Speak Spanish Speak Other Language

R230465, Portland, OR 97220 0 - 1 mi 1,277 8.31% 1,016 6.61% 1,356 8.83% 96 0.62%

R230465 Sitewise Online Demographics Pop-Facts: Demographic Snapshot (Part 1) 2021 Est. Population by Sex Male Female

R230465, Portland, OR 97220 0 - 1 mi 16,265 7,957 48.92% 8,308 51.08%

2021 Est. Population by Age Age 0 to 4 Age 5 to 9 Age 10 to 14 Age 15 to 17 Age 18 to 20 Age 21 to 24 Age 25 to 34 Age 35 to 44 Age 45 to 54 Age 55 to 64 Age 65 to 74 Age 75 to 84 Age 85 and over

16,265 907 938 922 492 568 716 2,458 2,596 2,144 1,909 1,537 670 408

Age 16 and over Age 18 and over Age 21 and over Age 65 and over 2021 Est. Median Age

13,337 13,006 12,439 2,615 39.36

2021 Est. Average Age

40.12

5.57% 5.77% 5.67% 3.03% 3.49% 4.40% 15.11% 15.96% 13.18% 11.74% 9.45% 4.12% 2.51% 82.00% 79.97% 76.48% 16.08%

R230465 Sitewise Online Demographics Pop-Facts: Demographic Snapshot (Part 1) 2021 Est. Male Population by Age Age 0 to 4 Age 5 to 9 Age 10 to 14 Age 15 to 17 Age 18 to 20 Age 21 to 24 Age 25 to 34 Age 35 to 44 Age 45 to 54 Age 55 to 64 Age 65 to 74 Age 75 to 84 Age 85 and over 2021 Est. Median Age, Male

R230465, Portland, OR 97220 0 - 1 mi 7,957 464 5.84% 481 6.04% 458 5.76% 254 3.19% 300 3.77% 383 4.82% 1,223 15.38% 1,282 16.11% 1,072 13.48% 921 11.57% 707 8.89% 280 3.52% 131 1.65% 38.24

2021 Est. Average Age, Male

38.87

2021 Est. Female Population by Age Age 0 to 4 Age 5 to 9 Age 10 to 14 Age 15 to 17 Age 18 to 20 Age 21 to 24 Age 25 to 34 Age 35 to 44 Age 45 to 54 Age 55 to 64 Age 65 to 74 Age 75 to 84 Age 85 and over 2021 Est. Median Age, Female

8,308 442 457 464 238 268 333 1,235 1,314 1,072 989 830 390 277 40.46

2021 Est. Average Age, Female

41.32

5.32% 5.50% 5.58% 2.87% 3.22% 4.01% 14.86% 15.81% 12.90% 11.90% 9.98% 4.70% 3.33%

R230465 Sitewise Online Demographics Pop-Facts: Demographic Snapshot (Part 1) 2021 Est. Pop Age 15+ by Marital Status Total, Never Married Males, Never Married Females, Never Married Married, Spouse present Married, Spouse absent Widowed Males, Widowed Females, Widowed Divorced Males, Divorced Females, Divorced 2021 Est. Pop Age 25+ by Edu. Attainment Less than 9th grade Some High School, no diploma High School Graduate (or GED) Some College, no degree Associate Degree Bachelor's Degree Master's Degree Professional School Degree Doctorate Degree 2021 Est. Pop. Age 25+ by Edu. Attain., Hisp./Lat. No High School Diploma High School Graduate Some College or Associate's Degree Bachelor's Degree or Higher Copyright © Claritas, LLC 2021. All rights reserved.

R230465, Portland, OR 97220 0 - 1 mi 13,499 5,377 39.83% 2,711 20.09% 2,665 19.74% 5,130 38.01% 681 5.05% 642 4.76% 183 1.35% 460 3.41% 1,668 12.36% 640 4.74% 1,028 7.62% 11,723 467 574 2,459 2,853 1,178 2,820 1,106 174 90

3.99% 4.90% 20.98% 24.34% 10.05% 24.06% 9.43% 1.49% 0.77%

1,028 208 302 321 197

20.22% 29.37% 31.24% 19.17%

R230465 Sitewise Online Demographics Pop-Facts: Demographic Snapshot (Part 2)

R230465, Portland, OR 97220 0 - 1 mi

Households 2026 Projection 2021 Estimate 2010 Census 2000 Census

6,767 6,504 6,065 5,542

Growth 2021-2026 Growth 2010-2021 Growth 2000-2010

4.04% 7.24% 9.45%

2021 Est. Households by Household Type

6,504

Family Households Nonfamily Households

3,750 57.66% 2,754 42.34%

2021 Est. Group Quarters Population

408

2021 HHs by Ethnicity: Hispanic/Latino

483

7.42%

7.22% 7.60% 6.11% 14.64% 17.10% 12.59% 10.75% 8.94% 8.31% 3.34% 2.71% 0.71%

2021 Est. Households by HH Income Income < $15,000 Income $15,000 to $24,999 Income $25,000 to $34,999 Income $35,000 to $49,999 Income $50,000 to $74,999 Income $75,000 to $99,999 Income $100,000 to $124,999 Income $125,000 to $149,999 Income $150,000 to $199,999 Income $200,000 to $249,999 Income $250,000 to $499,999 Income $500,000+ 2021 Est. Average Household Income

$

6,504 469 494 397 952 1,112 819 699 581 540 217 176 46 91,504

2021 Est. Median Household Income

$

71,114

White Alone Black or African American Alone American Indian and Alaska Native Alone Asian Alone

$ $ $ $

77,671 45,825 52,360 76,047

Native Hawaiian and Other Pacific Islander Alone

$

62,633

Some Other Race Alone Two or More Races

$ $

68,793 75,036

Hispanic or Latino

$

62,865

2021 Median HH Income by Single-Class. Race or Ethn.

R230465 Sitewise Online Demographics Pop-Facts: Demographic Snapshot (Part 2) Not Hispanic or Latino

R230465, Portland, OR 97220 0 - 1 mi $ 72,331

R230465 Sitewise Online Demographics Pop-Facts: Demographic Snapshot (Part 2) 2021 Est. Family HH Type by Presence of Own Children

R230465, Portland, OR 97220 0 - 1 mi 3,750

Married-Couple Family, own children Married-Couple Family, no own children Male Householder, own children Male Householder, no own children Female Householder, own children Female Householder, no own children

1,029 1,477 143 191 483 426

2021 Est. Households by Household Size

6,504

1-person 2-person 3-person 4-person 5-person 6-person 7-or-more-person 2021 Est. Average Household Size 2021 Est. Households by Presence of People Under 18

2,017 2,112 1,037 720 320 156 143

27.45% 39.37% 3.82% 5.11% 12.88% 11.37%

31.01% 32.47% 15.94% 11.08% 4.91% 2.39% 2.19%

2.44 6,504

Households with 1 or more People under Age 18

1,887 29.01%

Households with No People under Age 18

4,617 70.99%

Households with 1 or more People under Age 18 Married-Couple Family Other Family, Male Householder Other Family, Female Householder Nonfamily, Male Householder Nonfamily, Female Householder Households with No People under Age 18 Married-Couple Family Other Family, Male Householder Other Family, Female Householder Nonfamily, Male Householder Nonfamily, Female Householder

1,887 1,114 59.06% 181 9.59% 562 29.76% 19 1.02% 11 0.57% 4,617 1,390 30.10% 153 3.30% 348 7.54% 1,191 25.80% 1,535 33.25%

R230465 Sitewise Online Demographics Pop-Facts: Demographic Snapshot (Part 2) 2021 Est. Households by Number of Vehicles No Vehicles 1 Vehicle 2 Vehicles 3 Vehicles 4 Vehicles 5 or more Vehicles 2021 Est. Average Number of Vehicles

R230465, Portland, OR 97220 0 - 1 mi 6,504 543 8.35% 2,327 35.77% 2,399 36.89% 810 12.46% 345 5.31% 79 1.22% 1.76

Family Households 2026 Projection 2021 Estimate 2010 Census 2000 Census

3,899 3,750 3,501 3,455

Growth 2021-2026 Growth 2010-2021 Growth 2000-2010

3.97% 7.12% 1.31%

2021 Est. Families by Poverty Status 2021 Families at or Above Poverty

3,750 3,492 93.13%

2021 Families at or Above Poverty with Children

1,263 33.67%

2021 Families Below Poverty 2021 Families Below Poverty with Children 2021 Est. Pop Age 16+ by Employment Status In Armed Forces Civilian - Employed Civilian - Unemployed Not in Labor Force 2021 Est. Civ. Employed Pop 16+ by Class of Worker For-Profit Private Workers Non-Profit Private Workers Local Government Workers State Government Workers Federal Government Workers Self-Employed Workers Unpaid Family Workers

258 166

6.87% 4.42%

13,337 7 0.05% 8,885 66.62% 511 3.83% 3,933 29.49% 8,542 5,791 67.79% 1,013 11.86% 436 5.10% 233 2.72% 139 1.63% 919 10.76% 11 0.13%

R230465 Sitewise Online Demographics Pop-Facts: Demographic Snapshot (Part 2) 2021 Est. Civ. Employed Pop 16+ by Occupation Architect/Engineer Arts/Entertainment/Sports Building Grounds Maintenance Business/Financial Operations Community/Social Services Computer/Mathematical Construction/Extraction Education/Training/Library Farming/Fishing/Forestry Food Prep/Serving Healthcare Practitioner/Technician Healthcare Support Maintenance Repair Legal Life/Physical/Social Science Management Office/Admin. Support Production Protective Service Sales/Related Personal Care/Service Transportation/Moving 2021 Est. Pop 16+ by Occupation Classification Blue Collar White Collar Service & Farm 2021 Est. Workers Age 16+ by Transp. To Work Drove Alone Car Pooled Public Transportation Walked Bicycle Other Means Worked at Home

R230465, Portland, OR 97220 0 - 1 mi 8,542 190 2.22% 335 3.92% 277 3.24% 517 6.05% 197 2.31% 252 2.95% 470 5.50% 563 6.59% 37 0.43% 508 5.95% 482 5.64% 272 3.19% 204 2.39% 66 0.77% 47 0.55% 865 10.13% 1,013 11.86% 412 4.82% 80 0.94% 806 9.44% 219 2.56% 730 8.54% 8,542 1,815 21.25% 5,333 62.43% 1,394 16.32% 8,244 5,558 67.42% 856 10.39% 833 10.11% 213 2.59% 181 2.20% 90 1.09% 512 6.21%

2021 Est. Workers Age 16+ by Travel Time to Work* Less than 15 minutes 15 to 29 Minutes 30 to 44 Minutes 45 to 59 Minutes 60 or more Minutes

1,471 3,297 1,953 712 408

R230465 Sitewise Online Demographics Pop-Facts: Demographic Snapshot (Part 2)

R230465, Portland, OR 97220 0 - 1 mi

2021 Est. Avg. Travel Time to Work in Minutes*

28.63

2021 Est. Occupied Housing Units by Tenure

6,504

Owner-Occupied Renter-Occupied

3,860 59.34% 2,644 40.66%

2021 Occupied Housing Units: Avg. Length of Residence Owner-Occupied Renter-Occupied

14 5

R230465 Sitewise Online Demographics Pop-Facts: Demographic Snapshot (Part 2)

R230465, Portland, OR 97220 0 - 1 mi

2021 Est. Owner Occupied Housing Units by Value

3,860

Value Less than $20,000 Value $20,000 to $39,999 Value $40,000 to $59,999 Value $60,000 to $79,999 Value $80,000 to $99,999 Value $100,000 to $149,999 Value $150,000 to $199,999 Value $200,000 to $299,999 Value $300,000 to $399,999 Value $400,000 to $499,999 Value $500,000 to $749,999 Value $750,000 to $999,999 Value $1,000,000 to $1,499,999 Value $1,500,000 to $1,999,999 Value $2,000,000 or more 2021 Est. Median All Owner-Occupied Housing Unit Value

2021 Est. Housing Units by Units in Structure 1 Unit Attached 1 Unit Detached 2 Units 3 or 4 Units 5 to 19 Units 20 to 49 Units 50 or More Units Mobile Home or Trailer Boat, RV, Van, etc.

Dominant structure type

2021 Est. Housing Units by Year Structure Built Housing Units Built 2014 or Later Housing Units Built 2010 to 2013 Housing Units Built 2000 to 2009 Housing Units Built 1990 to 1999 Housing Units Built 1980 to 1989 Housing Units Built 1970 to 1979 Housing Units Built 1960 to 1969 Housing Units Built 1950 to 1959 Housing Units Built 1940 to 1949 Housing Units Built 1939 or Earlier 2021 Est. Median Year Structure Built** Dominant Year Structure Built

15 22 18 27 0 30 94 542 1,241 1,047 622 143 27 3 30 $

0.39% 0.58% 0.45% 0.69% 0.01% 0.78% 2.44% 14.03% 32.14% 27.13% 16.10% 3.71% 0.69% 0.07% 0.79%

395,307

6,834 197 2.88% 4,860 71.11% 242 3.54% 250 3.66% 576 8.42% 271 3.96% 371 5.44% 68 0.99% 1 0.01% 1 Unit Detached 6,834 473 29 249 565 301 811 576 1,269 1,478 1,083 1957 1940 to 1949

6.92% 0.42% 3.64% 8.27% 4.41% 11.87% 8.42% 18.56% 21.63% 15.85%

R230465 Sitewise Online Demographics Pop-Facts: Demographic Snapshot (Part 2)

Copyright © Claritas, LLC 2021. All rights reserved. * This row intentionally left blank. No Total Category. **1939 will appear when at least half of the Housing Units in this reports area were built in 1939 or earlier.

R230465, Portland, OR 97220 0 - 1 mi

R230465 Sitewise Online Demographics Pop-Facts: Census Demographic Overview (Part 1)

R230465, Portland, OR 97220 0 - 1 mi

Population 2026 Projection 2021 Estimate 2010 Census 2000 Census

16,914 16,265 15,187 14,485

Growth 2021-2026 Growth 2010-2021 Growth 2000-2010

3.99% 7.10% 4.85%

2010 Population by Single-Classification Race White Alone Black or African American Alone American Indian and Alaska Native Alone Asian Alone

15,187 10,502 69.15% 1,252 8.24% 193 1.27% 1,693 11.15%

Native Hawaiian and Other Pacific Islander Alone

100

0.66%

Some Other Race Alone Two or More Races

601 846

3.95% 5.57%

2010 Population By Ethnicity Not Hispanic or Latino Hispanic or Latino 2010 Hispanic or Latino by Single-Classification Race White Alone Black or African American Alone American Indian and Alaska Native Alone Asian Alone Native Hawaiian and Other Pacific Islander Alone Some Other Race Alone Two or More Races 2010 Population by Sex Male Female Male/Female Ratio

15,187 13,817 90.98% 1,370 9.02% 1,370 493 35.98% 51 3.74% 42 3.09% 10 0.71% 2

0.18%

580 42.34% 191 13.96% 15,187 7,383 48.61% 7,804 51.39% 0.95

R230465 Sitewise Online Demographics Pop-Facts: Census Demographic Overview (Part 1) 2010 Population by Age Age 0 to 4 Age 5 to 9 Age 10 to 14 Age 15 to 17 Age 18 to 20 Age 21 to 24 Age 25 to 34 Age 35 to 44 Age 45 to 54 Age 55 to 64 Age 65 to 74 Age 75 to 84 Age 85 and over Age 16 and over Age 18 and over Age 21 and over Age 65 and over 2010 Median Age

R230465, Portland, OR 97220 0 - 1 mi 15,187 1,005 6.62% 822 5.41% 818 5.39% 534 3.52% 658 4.33% 856 5.63% 2,472 16.28% 2,145 14.13% 2,151 14.16% 1,768 11.64% 863 5.68% 644 4.24% 452 2.98% 12,386 12,008 11,350 1,959 37.00

81.55% 79.07% 74.74% 12.90%

R230465 Sitewise Online Demographics Pop-Facts: Census Demographic Overview (Part 1) 2010 Male Population by Age Age 0 to 4 Age 5 to 9 Age 10 to 14 Age 15 to 17 Age 18 to 20 Age 21 to 24 Age 25 to 34 Age 35 to 44 Age 45 to 54 Age 55 to 64 Age 65 to 74 Age 75 to 84 Age 85 and over 2010 Median Age, Male

2010 Female Population by Age Age 0 to 4 Age 5 to 9 Age 10 to 14 Age 15 to 17 Age 18 to 20 Age 21 to 24 Age 25 to 34 Age 35 to 44 Age 45 to 54 Age 55 to 64 Age 65 to 74 Age 75 to 84 Age 85 and over 2010 Median Age, Female

Copyright © Claritas, LLC 2021. All rights reserved.

R230465, Portland, OR 97220 0 - 1 mi 7,383 498 6.74% 421 5.70% 436 5.91% 285 3.86% 328 4.44% 434 5.89% 1,210 16.39% 1,094 14.82% 1,051 14.24% 839 11.37% 397 5.38% 254 3.44% 134 1.81% 35.72

7,804 507 401 382 249 330 421 1,262 1,051 1,099 928 466 390 318 38.34

6.50% 5.14% 4.89% 3.19% 4.22% 5.40% 16.16% 13.47% 14.09% 11.89% 5.96% 5.00% 4.08%

R230465 Sitewise Online Demographics Pop-Facts: Census Demographic Overview (Part 2)

R230465, Portland, OR 97220 0 - 1 mi

Households 2026 Projection 2021 Estimate 2010 Census 2000 Census Growth 2021-2026 Growth 2010-2021 Growth 2000-2010 2010 Households by Household Type Family Households Non-family Households

6,767 6,504 6,065 5,542 4.04% 7.24% 9.45% 6,065 3,501 57.72% 2,564 42.28%

2010 Group Quarters Population

428

2010 Hispanic or Latino Households

345

5.70%

2010 Households by Household Size 1-person 2-person 3-person 4-person 5-person 6-person 7-or-more-person

6,065 1,875 1,984 957 681 292 144 131

30.91% 32.72% 15.78% 11.23% 4.82% 2.37% 2.16%

R230465 Sitewise Online Demographics Pop-Facts: Census Demographic Overview (Part 2) 2010 Households by Type and Presence of Children Married-Couple Family, own children Male Householder, own children Female Householder, own children

R230465, Portland, OR 97220 0 - 1 mi 6,065 962 15.86% 134 2.22% 448 7.38%

Married-Couple Family, no own children Male Householder, no own children Female Householder, no own children

1,381 22.76% 178 2.94% 397 6.55%

Non-family Households

2,564 42.28%

2010 Households by Presence of People Under Age 18 HH with 1 or More People Under Age 18: Households with No People Under Age 18:

6,065 1,761 29.04% 4,304 70.96%

HH with 1 or More People Under Age 18: Married-Couple Family Other Family, Male Householder Other Family, Female Householder Nonfamily, Male Householder Nonfamily, Female Householder

1,761 1,043 59.24% 169 9.60% 520 29.51% 18 1.04% 11 0.61%

Households with No People Under Age 18: Married-Couple Family Other Family, Male Householder Other Family, Female Householder Nonfamily, Male Householder Nonfamily, Female Householder

4,304 1,300 30.19% 144 3.34% 325 7.56% 1,109 25.77% 1,426 33.14%

2010 Occupied Housing Units by Tenure Owner-Occupied Renter-Occupied

6,065 3,617 59.64% 2,448 40.36%

Copyright © Claritas, LLC 2021. All rights reserved.

R230465 Sitewise Online Demographics Retail Market Power Opportunity Gap Report

By Retail Store Types

R230465, Portland, OR 97220 0 - 1 mi 2021 Demand

Total retail trade including food and drink (NAICS 44, 45 and 722) Total retail trade (NAICS 44 and 45)

Opportunity Gap/Surplus

2021 Supply

$

308,452,997 $

220,904,007 $

87,548,991

$

270,840,453 $

192,937,760 $

77,902,694

Motor vehicle and parts dealers (NAICS 441) Automobile dealers (NAICS 4411) New car dealers (NAICS 44111) Used car dealers (NAICS 44112) Other motor vehicle dealers (NAICS 4412) Recreational vehicle dealers (NAICS 44121) Motorcycle, boat, and other motor vehicle dealers (NAICS 44122) Boat dealers (NAICS 441222) Motorcycle, ATV, and all other motor vehicle dealers (NAICS 441228)

$ $ $ $ $ $

58,490,322 48,858,532 43,843,522 5,015,009 4,876,628 1,894,419

$ $ $ $ $ $

57,335,645 42,909,521 22,568,241 20,341,280 7,291,410 3,512,674

$ $ $ -$ -$ -$

1,154,676 5,949,011 21,275,282 15,326,271 2,414,782 1,618,255

3,778,737 - $

796,527

$

2,982,210 $

$

1,127,067 $

$

1,855,142 $

3,778,737 - $

1,923,595

Automotive parts, accessories, and tire stores (NAICS 4413)

$

4,755,162 $

7,134,713 - $

2,379,551

Automotive parts and accessories stores (NAICS 44131) Tire dealers (NAICS 44132)

$ $

3,006,574 $ 1,748,587 $

3,524,897 - $ 3,609,816 - $

518,323 1,861,228

Furniture and home furnishings stores (NAICS 442) Furniture stores (NAICS 4421) Home furnishings stores (NAICS 4422) Floor covering stores (NAICS 44221) Other home furnishings stores (NAICS 44229) Window treatment stores (NAICS 442291) All other home furnishings stores (NAICS 442299)

$ $ $ $ $ $ $

5,086,793 2,715,995 2,370,798 957,280 1,413,518 78,863 1,334,655

8,011,934 443,832 7,568,101 4,136,946 3,431,156 0 3,431,156

2,925,141 2,272,163 5,197,304 3,179,666 2,017,638 78,863 2,096,501

Electronics and appliance stores (NAICS 443) Household appliance stores (NAICS 443141) Electronics stores (NAICS 443142)

$ $ $

3,919,481 $ 744,558 $ 3,174,922 $

481,194 $ 0 $ 481,194 $

3,438,287 744,558 2,693,729

$

18,731,756 $

9,309,340 $

9,422,417

$ $ $ $ $

16,275,915 8,953,543 578,032 1,459,196 5,285,143

9,094,486 6,021,385 0 556,161 2,516,940

$ $ $ $ $

7,181,429 2,932,158 578,032 903,035 2,768,203

Building material and garden equipment and supplies dealers (NAICS 444) Building material and supplies dealers (NAICS 4441) Home centers (NAICS 44411) Paint and wallpaper stores (NAICS 44412) Hardware stores (NAICS 44413) Other building material dealers (NAICS 44419) Lawn and garden equipment and supplies stores (NAICS 4442) Outdoor power equipment stores (NAICS 44421) Nursery, garden center, and farm supply stores (NAICS 44422) Food and beverage stores (NAICS 445) Grocery stores (NAICS 4451) Supermarkets and other grocery (except convenience) stores (NAICS 44511) Convenience stores (NAICS 44512) Specialty food stores (NAICS 4452)

$ $ $ $ $ $ $

$ $ $ $ $

0 $

-$ $ -$ -$ -$ $ -$

1,127,067

$

2,455,841 $

214,854 $

2,240,988

$

500,015 $

0 $

500,015

$

1,955,826 $

214,854 $

1,740,972

$ $

42,106,805 $ 37,720,251 $

48,730,091 - $ 48,730,091 - $

6,623,286 11,009,839

$

36,165,732 $

37,159,055 - $

993,324

$ $

1,554,520 $ 1,054,331 $

11,571,036 - $ 0 $

10,016,516 1,054,331

R230465 Sitewise Online Demographics Retail Market Power Opportunity Gap Report

By Retail Store Types

R230465, Portland, OR 97220 0 - 1 mi 2021 Demand

2021 Supply

Meat markets (NAICS 44521) Fish and seafood markets (NAICS 44522) Fruit and vegetable markets (NAICS 44523) Other specialty food stores (NAICS 44529) Baked goods and confectionery and nut stores (NAICS 445291 + 445292) All other specialty food stores (NAICS 445299) Beer, wine, and liquor stores (NAICS 4453)

$ $ $ $

320,212 125,361 218,917 389,841

$

206,862 $

0 $

206,862

$ $

182,979 $ 3,332,222 $

0 $ 0 $

182,979 3,332,222

Health and personal care stores (NAICS 446) Pharmacies and drug stores (NAICS 44611) Cosmetics, beauty supplies, and perfume stores (NAICS 44612) Optical goods stores (NAICS 44613) Other health and personal care stores (NAICS 44619) Food (health) supplement stores (NAICS 446191) All other health and personal care stores (NAICS 446199)

$ $

16,699,896 $ 14,257,235 $

10,339,848 $ 10,339,848 $

6,360,048 3,917,386

$

1,082,954 $

0 $

1,082,954

$ $ $ $

500,968 858,739 304,454 554,284

Gasoline stations (NAICS 447)

$

25,513,539 $

Clothing and clothing accessories stores (NAICS 448) Clothing stores (NAICS 4481) Men's clothing stores (NAICS 44811) Women's clothing stores (NAICS 44812) Children's and infants' clothing stores (NAICS 44813) Family clothing stores (NAICS 44814) Clothing accessories stores (NAICS 44815) Other clothing stores (NAICS 44819) Shoe stores (NAICS 4482) Jewelry, luggage, and leather goods stores (NAICS 4483) Jewelry stores (NAICS 44831) Luggage and leather goods stores (NAICS 44832)

$ $ $ $ $ $ $ $ $ $ $ $

10,939,498 7,638,483 322,325 1,540,408 199,728 4,620,226 320,546 635,250 1,743,737 1,557,278 1,391,825 165,453

Sporting goods, hobby, musical instrument, and book stores (NAICS 451) Sporting goods, hobby, and musical instrument stores (NAICS 4511) Sporting goods stores (NAICS 45111) Hobby, toy, and game stores (NAICS 45112) Sewing, needlework, and piece goods stores (NAICS 45113) Musical instrument and supplies stores (NAICS 45114) Book stores and news dealers (NAICS 4512) Book stores (NAICS 451211) News dealers and newsstands (NAICS 451212) General merchandise stores (NAICS 452) Department stores (NAICS 4522) Other general merchandise stores (NAICS 4523) Warehouse clubs and supercenters (NAICS 452311) All other general merchandise stores (NAICS 452319)

$ $ $ $

$ $ $ $

$ $ $ $ $ $ $ $ $ $ $ $

0 0 0 0

0 0 0 0

$ $ $ $

Opportunity Gap/Surplus 320,212 125,361 218,917 389,841

$ $ $ $

500,968 858,739 304,454 554,284

23,214,678 $

2,298,861

3,576,238 996,868 230,152 766,716 0 0 0 0 1,688,498 890,871 890,871 0

$ $ $ $ $ $ $ $ $ $ $ $

7,363,260 6,641,615 92,173 773,692 199,728 4,620,226 320,546 635,250 55,239 666,407 500,954 165,453

$

3,773,369 $

2,288,297 $

1,485,071

$

3,455,834 $

2,288,297 $

1,167,537

$ $

2,425,082 $ 651,182 $

1,660,524 $ 627,773 $

764,558 23,409

$

177,597 $

0 $

177,597

$ $ $ $

201,973 317,535 299,705 17,830

$ $ $ $

0 0 0 0

$ $ $ $

201,973 317,535 299,705 17,830

$ $ $ $ $

36,780,660 2,636,939 34,143,722 30,597,623 3,546,098

$ $ $ $ $

18,806,021 452,304 18,353,718 18,353,718 0

$ $ $ $ $

17,974,639 2,184,635 15,790,004 12,243,906 3,546,098

R230465 Sitewise Online Demographics Retail Market Power Opportunity Gap Report

By Retail Store Types

R230465, Portland, OR 97220 0 - 1 mi 2021 Demand

Opportunity Gap/Surplus

2021 Supply

Miscellaneous store retailers (NAICS 453) Florists (NAICS 4531) Office supplies, stationery, and gift stores (NAICS 4532) Office supplies and stationery stores (NAICS 45321) Gift, novelty, and souvenir stores (NAICS 45322) Used merchandise stores (NAICS 4533) Other miscellaneous store retailers (NAICS 4539) Pet and pet supplies stores (NAICS 45391) Art dealers (NAICS 45392) Manufactured (mobile) home dealers (NAICS 45393) All other miscellaneous store retailers (NAICS 45399) Tobacco stores (NAICS 453991) All other miscellaneous store retailers (except tobacco stores) (NAICS 453998)

$ $ $ $ $ $ $ $ $ $ $ $

5,769,875 274,955 1,257,246 499,523 757,723 831,280 3,406,393 992,688 556,550 345,219 1,511,936 444,422

$

1,067,514 $

Non-store retailers (NAICS 454) Electronic shopping and mail-order houses (NAICS 4541) Vending machine operators (NAICS 4542) Direct selling establishments (NAICS 4543) Fuel dealers (NAICS 45431) Other direct selling establishments (NAICS 45439)

$ $ $ $ $ $

43,028,461 40,260,793 371,295 2,396,372 1,191,091 1,205,281

$ $ $ $ $ $

3,194,925 1,327,432 0 1,867,494 911,922 955,572

$ $ $ $ $ $

39,833,535 38,933,362 371,295 528,879 279,170 249,709

Food services and drinking places (NAICS 722) Special food services (NAICS 7223) Food service contractors (NAICS 72231) Caterers (NAICS 72232) Mobile food services (NAICS 72233) Drinking places (alcoholic beverages) (NAICS 7224) Restaurants and other eating places (NAICS 7225) Full-service restaurants (NAICS 722511) Limited-service restaurants (NAICS 722513) Cafeterias, grill buffets, and buffets (NAICS 722514) Snack and nonalcoholic beverage bars (NAICS 722515)

$ $ $ $ $ $ $ $ $ $ $

37,612,542 2,586,367 2,042,793 491,014 52,560 1,393,026 33,633,150 16,570,156 14,479,043 368,706 2,215,245

$ $ $ $ $ $ $ $ $ $ $

27,966,246 0 0 0 0 0 27,966,246 18,940,721 5,958,840 0 3,066,686

$ $ $ $ $ $ $ -$ $ $ -$

9,646,296 2,586,367 2,042,793 491,014 52,560 1,393,026 5,666,904 2,370,565 8,520,204 368,706 851,440

$ $ $ $ $ $ $

60,501,058 36,780,660 10,939,498 5,086,793 3,919,481 3,773,369 1,257,246

$ $ $ $ $ $ $

33,164,500 18,806,021 3,576,238 8,011,934 481,194 2,288,297 816,036

$ $ $ -$ $ $ $

27,336,558 17,974,639 7,363,260 2,925,141 3,438,287 1,485,071 441,211

GAFO* General Merchandise Stores-452 Clothing & Clothing Accessories Stores-448 Furniture & Home Furnishings Stores-442 Electronics & Appliance Stores-443 Sporting Goods, Hobby, Book, Music Stores-451 Office Supplies, Stationery, Gift Stores-4532 * GAFO (General merchandise, Apparel, Furniture and Other) represents sales at stores that sell merchandise normally sold in department stores. This category is not included in Total Retail Sales Including Eating and Drinking Places.

$ $ $ $ $ $ $ $ $ $ $ $

7,649,550 0 816,036 816,036 0 0 6,833,514 0 0 0 6,833,514 3,002,071

-$ $ $ -$ $ $ -$ $ $ $ -$ -$

1,879,674 274,955 441,211 316,513 757,723 831,280 3,427,120 992,688 556,550 345,219 5,321,578 2,557,649

3,831,443 - $

2,763,929

R230465 Sitewise Online Demographics Retail Market Power Opportunity Gap Report

By Retail Store Types

R230465, Portland, OR 97220 0 - 1 mi 2021 Demand

Retail Market Power data is derived from two major sources of information. The demand data is derived from the Consumer Expenditure Survey (CE Survey or CEX), which is fielded by the U.S. Bureau of Labor Statistics (BLS). The supply data is derived from the Census of Retail Trade (CRT), which is made available by the U.S. Census. Additional data sources are incorporated to create both supply and demand estimates.

The difference between demand and supply represents the opportunity gap or surplus available for each merchandise line in the specified reporting geography. When this difference is positive (demand is greater than the supply), there is an opportunity gap for that merchandise line; when the difference is negative (supply is greater than demand), there is a surplus.

Copyright © 2021 Environics Analytics. All rights reserved.

2021 Supply

Opportunity Gap/Surplus

Traffic Listing R230465, Portland, OR 97220 August 10, 2021 Map

#

Street

Cross Street

Dir.

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

NE Rocky Butte Rd NE Russell St NE Rocky Butte Rd NE Fremont Dr NE 89th Ave NE Rocky Butte Rd Northeast 92nd Avenue NE Fremont Dr NE Russell St NE 92nd Ave NE Brazee St NE 92nd Ave

NE Rocky Butte Ct NE Fremont Dr NE Rocky Butte Ln NE Russell St NE Fremont Dr NE Rocky Butte Ln NE Hill Way NE 89th Ave NE Fremont Dr NE Hill Way NE 90th Ave NE Sacramento St

N W NE SE SW E N SE E N E N

NE Russell St NE 92nd Ave NE 92nd Ave

Powered by Sitewise

NE 88th Ave NE Benjamin Ave NE Eugene St

E NE S

Volume

Type/Year

Dist. (mi)

645

Published

(1998)

0.2

2,182

Published

(2001)

0.2

482

Published

(1998)

0.2

2,493

Published

(1996)

0.2

Current Year

0.2

145 1,399

(1998)

0.2

4,441

Current Year

0.2

1,219

Current Year

0.2

955

Published

(2001)

0.2

4,263

Current Year

0.2

331

Current Year

0.3

7,216

Current Year

0.3

16,050

Current Year

0.3

854

Published

(2002)

0.3

4,076

Published

Current Year

0.3

6,869

Current Year

0.3

Data Source: Kalibrate TrafficMetrix