50
HabasitLINK® straight - 1" pitch belting M2470 Flat Top 1" MTW Description • • • • • • • • • • • •
Mold to width flat top belt Imperial widths 8.7 mm (0.34”) thick High strength and stiffness 0% open area Closed hinge Rod diameter 4.5 mm (0.18”) Headless Smart Fit rod retention Strong closed edges Beveled edges for smooth side transfer Lug teeth sprockets Two versions: - M2470Kxx (modules without tabs) - M2470Kxx-T20 (modules with 2 tabs)
Available accessories • For standard guiding profiles, refer to the HabiPLAST® brochure
Belt data Nominal belt width b0 A
M2470K03 M2470K03 M2470K03 M2470K04 M2470K04 M2470K04 M2470K06 M2470K06 M2470K06 M2470K07 M2470K07 M2470K07
mm 82.5 82.5 82.5 114.2 114.2 114.2 152.3 152.3 152.3 190.4 190.4 190.4
inch 3.25 3.25 3.25 4.5 4.5 4.5 6.0 6.0 6.0 7.5 7.5 7.5
mm 20.1 20.1 20.1 36 36 36 55.1 55.1 55.1 74.1 74.1 74.1
Belt material inch 0.8 0.8 0.8 1.4 1.4 1.4 2.2 2.2 2.2 2.9 2.9 2.9
POM POM POM POM POM POM POM POM POM POM POM POM
Rod mate- Nominal tensile rial strength FN straight run N lbf PP 1300 293 PBT 1600 360 PA 1850 416 PP 1900 428 PBT 2300 518 PA 2600 585 PP 2800 630 PBT 3400 765 PA 4300 968 PP 3600 810 PBT 4300 968 PA 5500 1238
Belt weight mB
kg/m 0.72 0.72 0.72 0.99 0.99 0.99 1.35 1.35 1.35 1.66 1.66 1.66
lb/ft 0.48 0.48 0.48 0.67 0.67 0.67 0.91 0.91 0.91 1.12 1.12 1.12
The belt weights are indicated for belts with tabs, the weight of belts without tabs are lower by circa 0.05 kg/m (0.03 lb/ft). Real belt widths are in most cases 0.1% to 0.3% smaller. Diameter of idling rollers (minimum)
Diameter of support rollers (minimum)
mm 40
mm 50
inch 1.6
inch 2
Diameter for gravity take-up and center drive rollers (minimum) mm inch 100 4
4178BRO.MOD-en1112HQR