HabasitLINK® sprockets – 1" pitch belting
131
IS610, IS610 CT, IS610 GT
Molded sprocket
Sprocket part number
Number of teeth
71007M* 71009M* 71012M 71015M SP71018 SP71019 SP71030
7 9 12 15 18 19 30
Machined sprocket
(PD) Nominal pitch diameter inch 2.31 2.92 3.87 4.81 5.80 6.08 9.54
mm 59 74 98 122 147 154 242
Puzzle split sprocket
(WH) Shaft center to top of wearstrip
All-in-One (BH) Shaft center to top of belt
Curved Top (BH) Shaft center to top of belt curve
inch 0.97 1.27 1.75 2.22 2.71 2.85 4.58
inch 1.34 1.65 2.12 2.59 3.09 3.23 4.96
inch 1.43 1.74 2.21 2.68 3.18 3.32 5.05
mm 25 32 44 56 69 72 116
mm 34 42 54 66 78 82 126
mm 36 44 56 68 81 84 128
Rugged Rib Top (BH) Shaft center to top of belt rib inch mm 1.6 41 1.91 48 2.38 60 2.85 72 3.35 85 3.64 92 5.22 132
Rugged Texture Top (BH) Shaft center to top of belt rib inch mm 1.36 35 1.67 42 2.14 54 2.61 66 3.11 79 3.25 83 4.98 126
(HT) Hub thickness inch 1.5 1.5 1.5 1.5 0.75 0.75 0.75
mm 38 38 38 38 19 19 19
M = molded sprocket Split sprockets and other tooth sizes are available. Standard machined sprocket material is UHMW, Nylon and Urethane are available. * Cannot be used with belts with hold-down tabs – 9 tooth works with 1” round bores. Sprocket part number
71007M* 71009M* 71012M 71015M SP71018 SP71019 SP71030
Available bore size 25 mm
1“
1“ sq.
30 mm
1-1/4“
✓ ✓ ✓ – ✓ ✓ ✓
✓ ✓ ✓ ✓ ✓ ✓ ✓
✓ ✓ ✓ – ✓ ✓ ✓
✓ ✓ ✓ ✓ ✓ ✓ ✓
– – – ✓ ✓ ✓ ✓
17/16“ – ✓ ✓ ✓ ✓ ✓ ✓
1-1/2“ – ✓ ✓ ✓ ✓ ✓ ✓
1-1/2“ sq. – – – ✓ ✓ ✓ ✓
mm 40 mm 40sq. – – – – – – ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓
1-15/ 16“ – – ✓ ✓ ✓ ✓ ✓
50 mm
2“ sq.
– – – – ✓ ✓ ✓
– – – – ✓ ✓ ✓
mm 60 mm 60sq. – – – – – – – – ✓ ✓ ✓ ✓ ✓ ✓
2-1/2“ sq. – – – – ✓ ✓ ✓
M = molded sprocket All bore sizes are round bore unless designated square (sq.). * Cannot be used with belts with hold-down tabs – 9 tooth works with 1” round bores. 4178BRO.MOD-en1112HQR