Portfolio 2015 2016

------------------------------------------------------Ali Alfaraj...------------------Waterford Institute of Technology Bsc (Hons) Architectural technology 2014 T. +(966) 567 166512 | Saudi E. ali_al_faraj@yahoo.com W.http://20044297.wix.com/afarchitect

Page 01

“What we do for ourselves dies with us, what we do for others and the world remains and is immortal� permermeated the universe.

It Pine comes -Albert

Light to life in the crystal. The prism is marvellous.

That is why the glass house is great.

Page 02

Scheerbart Glasarchitektur, 1914

CONTENTS

04 Real life project 08 The Infirmary,Retrofiting 10 Kildonton Project 18 Drawing & Painting 20 Photography Artwork 22 24 Curriculum Vitae

Page 03

Real life project

Research& desvelopment

Page 04

Research + Development project This is a real life project that Clancy Construction brought to AT3 Studio to see the power of BIM technology and how it is effective in real time. It is an integrated project between schools where (Hons) Construction Management and Engineering, and Quantity surveyor were involved in. Clancy Construction gave us a project worth 9million euro and recommended 9 Weeks approximately for the assignment to be done. The lecturer assign each student work individually in his own project. but at same time they divided us into groups to use different system in each group. The Constructions people went to site, do a survey using a ‘total station’, and they had token about 500 point in the site

to provide us with an actual contours line from the site. On the other hand, QS had been divided into groups and took a BIM model that we produce and do a quantity surveying to have an estimated figure from the project.

Myself I was assign to use Cast in-suit for the structure and 50mm Cavity wall for the wall.

Plus, use 3 different material for the finishing. Therefore, I chose an aluminum cladding + 12mm gab curtain wall for the glazing part + Wood finishing for ceramic tiles for some others parts and rain screen structure used for the façade to hold all different type of material that been assign to the building.

Page 05

Front view from the parking area

Structureal falier

Fixing the falier by increasing the beam depth

Page 06

3D of the structureal drawing

Structureal analysis

3D view from the Parking area

Internal 3D view from the Canteen

Plumbing plan

3D of Plumbing drawing

3D of Plumbing drawing

3D view of the front side of the D+R

Page 07

The Infirmary, Retrofiting EXECUTIVE SUMMARY

As part of our continuous assessment for Construction Technology 6, Building Energy Ratings and Environmental Science 4, we are required to submit a presentation concerning a large scale retrofit on the apartment complex in The Old Infirmary, John’s Hill, Waterford. After an in depth briefing with Chisholm, 3D view of Dempsey Stubbs Properties (CDS) we were divided South into seperate groups and were invited to tender our Facade proposals in a competitive bidding environment. The following technical document was constructed in conjunction with the PowerPoint presentation made on Thursday, October 24th 2013.

The main aim of this project which was extracted from the clients brief is to “research, analyse and implement a retrofit strategy for an existing apartment building which can be quantifiable and justified” whilst implementing a BIM methodology.

To achieve the above aim, the following objectives were drawn up and carried out by the group during the project: • We investigated the current Building Regulations and legal requirements concerning a protected structure and related them to the Infirmary.

• The group carried out a detailed audit on the existing building and identified current issues/problems that are present within the building.

• We used Therm software to explore existing problems such as cold bridging, air leakage, etc.

• A RetroFit strategy was compiled that was capable of solving the identified problems.

• Research of potential upgrades was analysed to investigate the impact they would have on the thermal efficiency of the building.

Apartment no. 414 Project name & Address:The Infirmary, Johns Hill, Waterford City, Waterford City Centre.

The apartment location is on third floor, on the new extension that been made on 2002 The current Building energy rate grade (E1) Proposed to upgrade to be (C1) See the table beside for more details

APT 414

Current Grade

Ref No.

Upgrade

20001

N/A

E1

315.13

68.82

20002 20003 20004

Pump Cavity 62.5mm K17 72.5mm K17

E1 E1 E1

308.8 304.91 303.94

66.82 66.02 65.81

20005

PC + Change Rads 62.5 K17 + Change Rads 72.5 K17 + Change Rads

D2

282.95

61.27

D2

279.62

60.55

D2

278.79

60.37

PC + Heat Corridor 62.5 K17 + Heat Corridor 72.5 K17 + Heat Corridor

C1

173.6

37.59

C1

170.3

36.88

C1

169.49

36.7

C1

164.57

35.63

C1

161.62

35

C1

160.9

34.84

20006 20007 20008 20009

North View of Site

20010

20011 20012

Goal

200013

PC + Heat Cor + Change Rads 62.5 K17 + Heat Cor + Change Rads 72.5 K17 + Heat Cor + Change Rads

Energy Value CO2 Emmisions

This grade are produced using DEAP software

Page 08

External

Internal

External

nternal

Apartment Ψ Psi-value Calculation Using U-factor calculation that been produce by Therm software we can calculate the Ψ Psi-value through Calculatin worksheet for thermal bridges then bring it into DEAP Thermal Bridging Application to get the result. It can be calculated manually using the formal as descrpted on the right side.However, I am going to use the software to do it.

External

Internal

Internal

External

I

Window cill therm details

It been add a kingspan insulation K17 into the frame of the window to increase the- air-tightness of the apartment and insulate the wall by adding bead insulation into the wall

E xternal Internal

Internal

E xternal

External

Internal Internal

Internal

External

Internal

Internal

Internal

Window Head therm details

We can see here the coldest point on the isotherm details. This cold points mostly locat. ed between moisture where the cold transfer through lower conductivity areas Floor and Celling therm details

Page 09

Creative design Extension + Protected Structural + retrofiting

Page 10

3D view of the concept

An extension restorant for Kildonton The agreculture college Kildonton is a project belong to Teagsc the agriculture college.

This project will became a part Bessborough House�château style�which known as Canadian form of architecture.However,it is located as I said in Kildonton Argicultural College estate has acted as the headquarters for Agriculture Science for many decades

The propose location of the project

Nowadays, nobody is interstedto building this type of building anymore here in Ireland. Therefore it become a challenging to make a decision for a protected structure. See how BIM influence the decision.

An interior view of the resturant handrenders using markers, pinces and inks

Page 11

Bessborough House

Site Plan

First inspration sketches

Winter @ 12p.m.

Shading types

Page 12

Sun path analysis

Summer @ 12p.m.

BIM model

Section though the BIM model

Page 13

Page 14

Page 15

Page 16

Wind analysis

Page 17

Drawing & Painting Watercolor + Pencil

Page 18

Eyes of Wandering

Concept of a museum created out of Arabic calligraphy

Dublin traditional door1

Rome, Italian

Glimpse on my sketchbook

Page 19

Photogarphy Bahrain + UK + Poland

Page 20

Page 21

ArtWork From my work experience

Page 22

Page 23

Curriculum Vitae Name Ali Alfaraj

• Maintenance supervision

Summer 2008

Alawami Planers & Consultants,Qatif, Saudi Arabia

Driving Licence Yes FAS Safe Pass Yes

Saudi Arabia • Electrical drawing as Draftsman • Sound & Security System drawing as Draftsman • Architectural drawing as Draftsman

Language Arabic and English

• Mechanical drawing as Draftsman

Contact No.

+966 567 166512

Email ali_al_faraj@yahoo.com

Website http://20044297.wix.com/afarchitect

Main Objective

EDUCATION

My desire is to find a stable yet challenging position in a professional environment in which to learn new technologies and skills while utilizing my previous experiences to improve beyond my current abilities. I expect to be in position where I can practice designing and planning development. Working on teams and be a part of the decision that will be made. Studying and work though different nations will help to improve and exceed expectations in all aspects of my work.

2012 – 2014

Waterford Institute of Technology, Waterford, Ireland

(Hons) BSc in Architecture Technology

2012 – 2013

Waterford Institute of Technology, Waterford, Ireland

WORK EXPERIENCE 2015- Present

TVTC, Algasim, Saudi Arabia

Architecture instrcture: • Delivering lectures, seminars and tutorials;Internal and external for government and semi-government sectors • Designing, preparing and developing teaching materials

2011 – 2012

Waterford Institute of Technology, Waterford, Ireland

Third year - BSc in Construction Management & Engineering 2010 – 2011

Waterford Institute of Technology, Waterford, Ireland

Bridging Program for International Student 2007 – 2009 Jeddah Technology College, Jeddah, Saudi Arabia Diploma in Technical of Architecture VOLUNTEER

• Setting and marking examinations

Since 2000 I have been doing some job as Graphics Designer, and Photographer

• Undertaking personal research projects and actively contributing to the institution’s research profile • Writing up research and preparing it for publication • Supervising students’ research activities • Evaluate government and simi-government projects 2009- 2010

BSc in Architecture Technology

• Assessing students’ coursework • Supporting students through a pastoral or advisory role

Suhaimi Design, Dammam, Saudi Arabia

Architect/Graphic designer: 14st Oct. 2009 to 30th Jun. 2010 • Architect (Design, Draftsmen, Reviewing & Supervision)

Page 24

• Planning development

HIGHLIGHTS OF EXPERTISE Building Information Modelling (BIM), Architectural Designing, Sustainable design, Architecture Markers & software rendering, Sketching, Painting, Drawing, Health & Safety, Project Estimating, Planning & design development, Retrofitting, Building and Details analysis, Working on Heritage & Conservation site, Detailing, Project timeline ,and documentation HOBBIES Sport: Hiking, Basketball and swimming.

Travel: I enjoy travelling and have been to the USA, UK, UAE and many others countries.

Photography,Drawing, Sketching, Video games environment design

• Project Sheet, Posters and Presentation

AFFILIATION

• Newsletter (Designer and Article writer)

Engineering Ireland

• Photographer

Chartered Institute of architecture technologists (CIAT)

Summer 2008

Qatif Technology College, Riyad Rd, Qatif, Saudi Arabia

REFEREES

COOP period with the College as an Architect.

• Building Designer

SafePass

Saudi Consultant Engineering CIOB

References & Supporting Documentation Furnished Upon Request.` Signature : _____________________

Page 25