MSD Winter 23/24 Catalog - USA

Page 1

WINTER 2024 US CATALOG
802 9 ST N, GOLDEN, BC V0A 1H2 PLACE YOUR ORDER: ONLINE: MOUNTAINSPORTSDISTRIBUTION.COM BY E-MAIL: ORDERS@MOUNTAINSPORTSDISTRIBUTION.COM BY PHONE: 1.888.987.7533 (SLED)
MOUNTAIN LAB ................................. 4 KRANKEM ......................................... 52 HIGHMARK AIRBAGS ...................... 20 MAMMUT ........................................... 12 CHEETAH FACTORY RACING .......... 62 CONTENTS WINTER 2024 1 25 36 37 45
FREE Essential Gear for the Backcountry 1 MSD | DEALER CATALOGUE MOUNTAIN LAB
ROAM
FLASHLIGHT SYSTEMS 03 SAWS 08 EMERGENCY GEAR 14 RADIOS 07 PROTECTIVE WEAR 13 BOOT DRYER 19 BLUETOOTH HELMET SPEAKER 06 STRAPS 11 WATERPROOF BAGS 17 WEARABLES 20 POP 22 MOTION ACTIVATED KINETIC HEADLAMP 05 TOOLS 09 HEATED WEARABLES 15 contents 2 WINTER 2024 MOUNTAIN LAB

FLASHLIGHT SYSTEMS

X1800 LUMEN FLASHLIGHT KIT

MTN-LAB-X1800

The X1800 Flashlight Kit packs a full 1800 lumens of light into a compact, efficient design. Designed for those that operate at high speed at night this is the perfect choice. Kit includes, quick-go connect, GoPro mount, handlebar mount, and wired remote control for handlebar use. The X1800 can also be used as a power bank. The X1800 now features a lockout mode that can be used to prevent the flashlight from being turned on accidentally when carried inside a backpack or pocket.

SPECIFICATIONS

• Max brightness 1800 lumens

• 6700 mAh battery capacity

• Power bank function

• Wired handlebar remote control

• >200 m beam distance

• 125˚ floodlight angle

• IPX6 waterproof

• Micro-USB charging

• 201 g

• 118 x 53 x 33 mm

S1500 LUMEN FLASHLIGHT KIT ML-FLK-S1500

S1500 is the next generation of lighter, brighter flashlight from Mountain Lab. In addition to regular flashlight modes, S1500 also features ‘Smart Mode’—an extra safety feature for riders in daylight. In Smart Mode, the S1500 emits a bright strobe light to increase rider visibility and safety. When daylight fades, the flashlight automatically switches to a steady headlight. In Smart Mode, after two minutes without motion the light will turn off to preserve battery life, until motion is detected again.

S1500 also features a lockout mode that can be used to prevent the flashlight from accidentally turning on when carried inside a backpack or pocket. It is IPX6 waterproof and uses USB-C fast charging. The S1500 Flashlight kit includes both handlebar and helmet quick-connect mounting options.

SPECIFICATIONS

• Max brightness 1500 lumens

• 4800 mAh battery capacity

• Smart Mode

• >200 m beam distance

• 118˚ floodlight angle

• IPX6 waterproof

• USB-C fast charging

• 159 g

• 108 x 28 x 38 mm dimensions

MODES LUMENS RUNTIME / DUREE Turbo / Turbo 1800 1h 55min High / Forte 900 4hrs 30 min Medium / Moyenne 500 6hrs 25 min Low / Faible 200 12 hrs 30 min Eco / Eco 100-50 50 hrs Strobe / Stroboscopique 1800 2hrs 45min MODES LUMENS RUNTIME / DUREE Ultra High 1500 1hr 48 mins High 750 4hrs Medium 300 12hrs Low 100
Breathe
Daytime Flash
3 MSD | DEALER CATALOGUE MOUNTAIN LAB
24hrs
100-50 24hrs
500 30hrs $179.99 $129.99

$109.99 $89.99

X1260 LUMEN FLASHLIGHT KIT

MTN-LAB-X1260

The X1260 Flashlight Kit strikes the perfect balance of brightness, weight and functionality for adventurers on the move. The X1260 is equally well-suited for mounting on a helmet or handlebars and it will light the way for any outdoor activity in the dark, in any weather. The X1260 can also be used as a power bank.

MODES LUMENS RUNTIME / DUREE

Turbo / Turbo 1260 2hrs 30min

High / Forte 400 6hrs

Medium / Moyenne 200 9hrs

Low / Faible 100 19hrs

Eco / Eco 50 33hrs

Strobe / Stroboscopique 1260 3hrs 30min

SPECIFICATIONS

• Max brightness 1260 lumens

• 4500 mAh battery capacity

• Power bank function

• >200 m beam distance

• 118˚ floodlight angle

• IPX6 waterproof

• Micro-USB charging

• 194 g

• 113 x 39 x 42 mm

FLASHLIGHT KIT PARTS & REPLACEMENT PARTS

ALL KITS INCLUDE:

• Charging cable

• Handlebar mounting bracket

• GoPro accessory mount

• GoPro helmet mount

X800 LUMEN FLASHLIGHT KIT MTN-LAB-X800

The X800 Flashlight Kit is the lightest flashlight in the Mountain Lab line-up and most suitable for helmet use. Featuring 800 lumens of power and up to 23.5 hours of run time, this powerful light is the ultimate tool for adventures. Kit includes, quick-go connect, GoPro mount, and handlebar mount.

MODES LUMENS RUNTIME / DUREE

High / Forte 800 2hrs

Medium / Moyenne 400 3hrs 05min

Low / Faible 200 6hrs

Eco / Eco 100-50 23hrs 30min

Strobe / Stroboscopique 800 6hrs

SPECIFICATIONS

• Max brightness 800 lumens

• 2500 mAh battery capacity

• >200 m beam distance

• 85˚ floodlight angle

• IPX6 waterproof

• Micro-USB charging

• 125 g

• 101 x 34 x 31 mm

REPLACEMENT HANDLEBAR QUICK RELEASE MOUNT

MTN-LAB-XHB2

Allows the flashlight to be mounted to handlebars.

REPLACEMENT HELMET QUICK RELEASE MOUNT

MTN-LAB-XHE2

Allows the flashlight to be affixed to GoPro style helmet mount (not included).

4 WINTER 2024 MOUNTAIN LAB

$34.99 MOUNTAIN LAB

KINETIC HEADLAMP

The Kinetic Headlamp features a motion sensor that allows you to turn the light on and off with the wave of your hand—perfect for when you’re wearing gloves or busy holding tools or parts. Two lights—spot and flood—and five brightness settings up to 290 lumens allow the user to dial in the perfect lighting for any situation. The Kinetic Headlamp is IPX7 waterproof, with a rugged ABS case. The 1200 mAh USB-rechargeable battery offers a runtime of 4 to 20 hours, depending on output.

FEATURES

• 5W white LED (190 lumens) spotlight + 3W white (100 lumens) floodlight

• Motion sensor

• IPX7 waterproof

• 1200mAh USB-rechargeable battery

• Rugged ABS case

MTN-LAB-HLK WAVE YOUR HAND TO TURN ON AND OFF!
• Beam Distance: 120 m spotlight + 10 m floodlight 5 MSD | DEALER CATALOGUE

$64.99

BLUETOOTH HELMET SPEAKER SYSTEM

MTN-LAB-SPK1

The Mountain Lab Bluetooth Helmet Speaker System is designed for sledders, motorbikers, skiers, snowboarders, and other outdoor enthusiasts who like to listen to music while wearing a compatible helmet. It features easy to push buttons and easy pairing with your favourite device. The 40mm HD Speakers with Advanced CVC technology provide rich sound and block ambient noise as well as helping to cut down on background noise. The included boom microphone accessory allows the user to make and answer calls on their Bluetooth-enabled smartphone device.

* Please note that this unit does not work well with helmets which do not have a place for speakers.

SPECIFICATIONS

• Bluetooth Version: Bluetooth V4.1, CSR chipset

• Working Time: 4-8hrs

• Stand By: 120 hrs

• Charge Time: about 2hrs

• Speaker: Φ40mm

• Battery Capacity: 200mAh

• Color: Black

• Operating Frequency: 2.4GHz

• Connectors: USB

• Intercom cable: scalable K cable

FEATURES

• Wirelessly listen to music with integrated Bluetooth technology

• Hands-free function

• Built-in lithium-ion battery with a long standby (120 hours) and running time (4-8 hours)

• Power display support on cellphone

• 2 hour charge time

PACKAGE INCLUDES

• Headset

• Boom Microphone

• USB Charger Cable

• Sponge Pads

• Adhesive Mounting Patches

• User Manual

6 WINTER 2024 MOUNTAIN LAB

SCOUT 2W 2-WAY RADIO

Mountain Lab’s most bulletproof two-way radio, the Scout 2W Radio has been specifically designed to handle your most extreme adventures. The radio is built strong, with IP67 dust- and waterproof rating, and featuring a tough and durable exterior.

The Scout transmits at an industry-leading 2 watts—the most allowed in a two-way radio that doesn’t require a license to operate.

It is fully compatible with all FRS/GMRS radios on the market (including the ROAM 2W Radio), and can be used with or without the included speaker microphone.

INCLUDED

• IP56 waterproof speaker microphone

• Speaker microphone cover

• Charging tray, cable and adapter

• Belt clip

FEATURES

• 2 watts transmission power

• Fully waterproof

• 22 channels, 121 privacy codes

• Built-in flashlight and red SOS light

• Light flashes when radio is dropped in water

• Rechargeable NiMH battery power

• 75+ hours run time (in standby)

• Standard AA battery backup capability

• Automatic power-saving

• Keypad lock

• Scan function

• Dual channel watch

• Squelch level

• Monitor channel

• Adjustable call tone

• Voice-activated transmission

• NOAA weather

• FCC and IC certified

SPEAKER MICROPHONE COVER

MTN-LAB-RCV2

Protects the Mountain Lab radio speaker microphone from exposure to the elements.

SINGLE RADIO MTN-LAB-RDS1 SET OF 2 RADIOS MTN-LAB-RDS2

SPEAKER MICROPHONE

Roam Radio Mic Replacement: MTN-LAB-RD3

Scout Radio Mic Replacement: MTN-LAB-RDSMS

A replacement IP56 speaker microphone for your Mountain Lab 2W radio.

$149.99 $239.99 $24.99 $39.99 7 MSD | DEALER CATALOGUE MOUNTAIN LAB

ULTIMATE BACKCOUNTRY CHAINSAW

MTN-LAB-SAW1

The Mountain Lab Ultimate Backcountry Chainsaw is extremely compact, lightweight, and cuts through wood amazingly well. The perfect tool for all your outdoor adventures!

BACKWOODS FOLDING SAW

ML-SAW-FLD-10

This oversized version of our popular folding saw features a 10 in. (25 cm) long by 1.2 mm thick blade for quicker cutting of larger diameter wood.

The long, easy grip handle is more comfortable for two-handed use, allowing for much faster cutting with less effort.

HARVESTER SAW

MTN-LAB-SAW3

This fixed-blade hand saw with a 13 in. (33 cm) long cutting edge makes quick work of heavy-duty trail clearing, firewood collection and shelter building. The cushioned, ergonomic handle features improved material for better grip. For winter users, 5 cm markings on the blade allow users to measure columns for snow stability tests. A 3 mm grid pattern printed on the blade allows for snow crystal size estimation.

FOLDING SAW

MTN-LAB-SAW2

Our original Folding Saw continues to be a best-seller. The 7 in. (18 cm) blade is 1.2 mm thick, providing a stiffer, faster cutting blade than most other folding saws available.

This saw is incredibly durable, and the curved, tacky grip makes it easy to hold and operate.

SIDEKICK HATCHET

MTN-LAB-AXS

The Sidekick Hatchet packs small and light for all your powersports adventures. The 14” length and perfect balance allows for powerful and deep cuts for an axe its size and the improved nylon fibre composite sheath prevents dulling in transit.

$24.99 $39.99 $34.99 $29.99 8 WINTER 2024 MOUNTAIN LAB
$24.99

$109.99

BACKCOUNTRY TOOL KIT

ML-TK-BC

The Mountain Lab Backcountry Tool Kit has been specifically designed for backcountry repairs of your snowmobile or off-road vehicle. This compact and lightweight tool kit contains the tools required for the most common backcountry repair jobs. Tools are organized and contained in a water-resistant EVA protective case.

BACKCOUNTRY TOOL KIT CONTENTS:

• Water-Resistant Soft Case

• Lightweight Wrenches

• Metric

• 8-10 mm

• 10-13 mm

• 2-14 mm

• 15-17 mm

• 16-18 mm

• SAE

• Mini 1/4” Ratchet

• 4” 1/4” Drive Extension

• 1/4” to 3/8” Drive Adapter

• Sockets

• Metric

• 1/4” 8 mm socket

• 1/4” 10 mm deep socket

• 1/4” 13 mm socket

• Bit Sockets

• Torx

• 1/4” T20 socket

• 1/4” T25 socket

• 1/4” T30 socket

• 1/4” T40 socket

• Allen

• 1/4” H4 socket

• 1/4” H5 socket

• 6” Crescent Wrench

• 6.5” Long Nose Locking Pliers

• Spring Puller Tool

• Mechanic’s Wire

• Electrical Tape

• Zip Ties

• 3/8”

• 7/16”

• 1/2”

• 9/16”

$49.99

TRAILHEAD MULTI-TOOL ML-MT-TH

• 3/8” 15 mm deep socket

• 3/8” 16 mm socket

• 3/8” 17 mm socket

• SAE

• 1/4” 7/16” socket

• 1/4” 1/2” socket

• 1/4” H6 socket

• 1/4” H8 socket

• Bit Driver

• Screwdriver Bits

• Philips #1, #2, #3

• Slot #3, #6

TOOLS INCLUDED:

• Flat Nose and Regular Pliers

• Serrated Knife

The Mountain Lab Trailhead Multi-tool provides 15 invaluable tools for those times when you’re stuck in a pinch.

The blades are manufactured from high-quality 420 Stainless Steel, which maintains a keen edge but is easy to sharpen. Each tool is manufactured with ultra-precise fine-blanking technology for the highest quality.

All tools can be accessed with the pliers in both the open or closed positions, and the tools automatically lock in place for safe usage.

A return spring allows easy use of the pliers with less hand fatigue.

The Trailhead Multi-tool comes with a nylon carry case included, which can be mounted on your belt or pack strap for easy access.

SPECIFICATIONS

• Length: 105 mm closed / 160 mm open

• Weight: 381 g

• Flat Knife

• Saw

• Awl

• Metal and Wood File w/ Ruler

• Can Opener w/ Mini-Slotted Screwdriver

• Bottle Opener w/ Slotted Screwdriver

• Wire Cutter

• Wire Stripper

• Magnetic 1/4” Bit Driver

• Driver Bits Included:

• Phillips #1, #2, #3

• Slot 2. 5, 4, 6

• Torx T10, T15

9 MSD | DEALER CATALOGUE MOUNTAIN LAB

ENDURO TOOL KIT - METRIC

ML-TK-END-MET

The Enduro Tool Kit Metric is designed to be a lightweight, trailside emergency repair tool kit for dirt bike riders on the go.

$49.99 MOUNTAIN LAB

It features a carefully curated selection of quality tools to handle common trailside repairs of dirt bikes that use metric fasteners.

A tool roll helps secure and organize the tools. There is a zipper pouch for small parts and pieces.

The tool roll is contained inside a lightweight pouch that adds protection and water-resistance.

TOOLS

INCLUDED:

• T-handle with ¼” drive

• ¼” drive 10 cm (4”) extension

• ¼” drive 15 cm (6”) flex extension

• 6 mm, 8 mm, 10 mm, 12 mm, 13 mm ¼” drive sockets

• ¼” bit driver adapter

• Mini bit driver handle

• SL4, SL6, PH1, PH2, T25, T30, T40, T45 bits

• 3 mm, 4 mm, 5 mm, 6 mm hex keys

• 8-10 mm, 12-14 mm, 13-17 mm open-ended wrenches

• 6” mini crescent wrench

• Mini needle-nose pliers with cutters

• 3 m electrical tape roll

• 1 m mechanic’s wire

• 5 zip ties

• Tool organizer roll

• Water-resistant zippered case 10 WINTER 2024

$22.99

SKI PULL STRAP

MTN-LAB-SPS

The perfect tool to help get your snowmobile unstuck! This 700 kg sling is tough, compact, and easy to use. Simply pass an end through a ski loop and pull on both ends or girth hitch it to a ski and have two people pull. Safer, more effective, and less impact on your back than simply pulling. Easily fits inside your pocket.

$29.99

SNOWMOBILE TOW KIT

MTN-LAB-TOW

Extremely lightweight and easy to use. Sets up in seconds and provides an effective way to tow a broken snowmobile home. Simply remove the belt of the broken snowmobile, girth hitch the strap to the tow snowmobile, and then loop the two straps around the broken snowmobile’s spindles. The system works well in tricky terrain and allows the rider of the broken snowmobile to continue to maintain control.

$19.99

RATCHET STRAPS

MTN-LAB-STRP

The Mountain Lab Gear Ratchet Tie Down Strap is a versatile tie down strap that can be used to secure a variety of powersports equipment or other cargo in transit. The heavy-duty strap uses a ratcheting buckle to safely and securely snug down heavy objects. The strap is 12’ long—enough to cross a trailer or pickup truck bed in any direction.

Both ends of the strap feature a securement hook with a spring-loaded locking gate that makes the strap easier to install. The hooks are coated to prevent scratching of your vehicle or cargo.

The Ratchet Tie Down Strap has a breaking strength of 1500 kg (3300 lb). This package contains a single strap and drawstring storage pouch.

TOW / RECOVERY STRAP

This heavy-duty recovery and tow strap is 50 mm (2”) wide with a breaking strength of 4,540 kg (10,000 lb). It features oversized reinforced loops at both ends for ease of use and durability. A steel quick-release carabiner with a working load of 4.75 tonnes (10,000 lb+) allows quick and easy installation. The Mountain Lab Recovery Strap comes in two lengths: 6.1 m (20’) and 12.2 m (40’).

$39.99 $49.99

MTN-LAB-TOW2 20’ (6.1 m) length

MTN-LAB-TOW3 40’ (12.2 m) length

11 MSD | DEALER CATALOGUE MOUNTAIN LAB

This pair of burly tie down straps are designed to safely secure your UTV, ATV or heavy motorcycle in transit. The straps are 1.5” wide by 96” long for versatile use, and feature reinforced stitching for extra strength.

The tie downs use a soft loop that allows the strap to be secured to the vehicle without the risk of scratching or damage. The soft loop is longer than on our Motorcycle Soft Loop Tie Downs, to allow better securement options for larger vehicles.

Rubberized hooks further reduce the risk of accidental damage to your vehicle, and a locking gate prevents the hooks from coming loose in transit.

A ratcheting system is used to securely snug down heavier vehicles.

The straps are colour coded to make it easier for the user to quickly find the right end.

Mountain Lab UTV Soft Loop Tie Down Straps are sold in pairs. The package includes a drawstring storage pouch

MOTORCYCLE SOFT LOOP TIE DOWN STRAPS

ML-STR-SLM

Our Motorcycle Soft Loop Tie Down Straps are best suited for lighter vehicles such as dirt bikes and motorcycles. The straps are 1.5” wide by 84” long, and feature reinforced stitching for strength.

These straps use a soft loop that allows the user to attach the straps to the motorcycle without risk of scratching the bike.

Rubberized hooks further eliminate the risk of damage. These feature a locking gate that prevents the hooks from coming loose in transit.

The Motorcycle straps use a cam buckle for quick and easy securement that will not slip or come loose.

The straps are colour coded to make it easy for the user to find the right end quickly.

VISE STRAP

Once you’ve tried one of these ‘do anything’ straps, you’ll find a million uses for them. They are fast to install, and won’t come loose, ever. Slightly stretchy and super strong, you can rely on these PU straps to lock down just about anything.

Mountain Lab Vise Straps feature a nylon clasp that won’t scratch or damage paint or powder coating on your powersports vehicle surfaces. Vise Straps can be wrapped around twice to secure smaller items, or daisy-chained in series to secure larger objects.

Mountain Lab Motorcycle Soft Loop Tie Down Straps are sold in pairs. The package includes a drawstring storage pouch ML-STR-VS-20-BK

Common uses include:

• Securing luggage to ADV and dual-sport bikes

• Lashing an axe or fire extinguisher to the frame of a UTV

• Strapping gear to a snowmobile rack

• Organizing coils of cables and rope

SPECIFICATIONS:

• Length: 510 mm (20 in.)

• Width: 25 mm (1 in.)

• Thickness: 2.5 mm (<1/8 in.)

• Working Load: 35 kg (77 lb.)

// BLACK ML-STR-VS-20-TL // TEAL
$44.99 $34.99 $14.99 12 WINTER 2024 MOUNTAIN LAB

PROTECTION SHORT SLEEVE SHIRT

ML-PRO-SSS-S, ML-PRO-SSS-M, ML-PRO-SSS-L, ML-PRO-SSS-XL, ML-PRO-SSS-2XL

The Mountain Lab Protection Short Sleeve Shirt is designed specifically for riders looking for upper body protection that is primarily low-profile, comfortable and lightweight.

Thermoformed EVA is used over the chest and abdomen to provide effective protection that won’t limit mobility or trap excessive heat. Thermoformed EVA is also placed on each side, to protect the torso from lateral impacts. The shoulders are protected by CE certified Type A EN1621-1 Level 1 protection shoulder pads.

The shirt material uses Lycra, which is form-fitting, comfortable and will stay in place.

A full-length offset zipper makes putting on and taking off the shirt easier without reducing any protection coverage. A soft zipper garage prevents the zipper car and pull tab from making contact with the skin.

PROTECTION LONG SLEEVE SHIRT

ML-PRO-LSS-S, ML-PRO-LSS-M, ML-PRO-LSS-L, ML-PRO-LSS-XL, ML-PRO-LSS-2XL

The Protection Long Sleeve Shirt is similar to the short sleeve version, with the addition of elbow protection and form-fitting sleeves that extend to the wrist.

The elbows feature CE certified Type A EN1621-1 Level 1 elbow pad protection.

KNEE GUARD

MTN-LAB-KNE

KNEE GUARD PRO

MTN-LAB-KN2 - SM/MD

MTN-LAB-KN2XL - LG-2XL

The intelligent foam in the Knee Guard Pro hardens on impact to provide CE Level 1 protection with minimal bulk and weight, while Kevlar panels provide abrasion resistance. Perfect for knee protection from impacts with snowmobile body panels.

Designed for adventuring these robust knee pads are ideal for offroad activities. Easy to quickly put on and take off, these are a great value and great protection.

$99.99 $119.99 $49.99 $59.99 13 MSD | DEALER CATALOGUE MOUNTAIN LAB

$39.99 $49.99 $19.99 $49.99 MOUNTAIN LAB

BACKCOUNTRY FIRST AID KIT

MTN-LAB-FA1

Designed specifically for snowmobilers, this premium first aid kit is incredibly well-stocked and highly durable to withstand the rigors of snowmobiling. An absolute necessity in the backcountry, this kit includes 67 essential supplies to help ensure the safety of your group. Featuring a durable, water-resistant neoprene cover, this is what you need in your tunnel bag or pack.

Outside dimensions: 20 cm x 15 cm x 5 cm (8” x 6” x 2”).

CONTENTS:

• X 4 latex gloves

• X 1 cotton triangular bandage

• X 10 alcohol wipes

• X 6 dressing pads (10cm x 10cm)

• X 4 adhesive dressing pads (6cm x 7cm)

• X 10 adhesive bandages (5.6cm x 1.9cm)

• X 10 adhesive bandages (7.2cm x 1.9cm)

• X 10 adhesive bandages (7.6cm x 2.5cm)

• X 5 butterfly closures

• X 1 medical tape roll (4.5m)

• X 1 elastic bandage roll (4.5m)

• X 1 dressing bandage (18cm x 18cm)

• X 4 sterile gauze pads (7.5cm x 7.5 cm)

BACKCOUNTRY PLUS FIRST AID KIT

MTN-LAB-FA2

The Backcountry Plus First Aid Kit provides even more supplies than our backcountry kit in a bigger case. Perfect for your sled, ATV, cabin, kayak, boat, and more! Outside dimensions: 20 cm x 15 cm x 7.5 cm (8” x 6” x 3”).

CONTENTS:

• X 1 bandage scissors

• X 1 emergency blanket (130cm x 210cm)

• X 4 latex gloves

• X 2 cotton triangular bandages

• X 10 alcohol wipes

• X 6 dressing pads (10cm x 10cm)

• X 4 adhesive dressing pad (6cm x 7cm)

• X 2 gauze bandages (4m x 8cm)

• X 10 adhesive bandages (5.6cm x 1.9cm)

• X 10 adhesive bandages (7.2cm x 1.9cm)

• X 10 adhesive bandages (7.6cm x 2.5cm)

• X 5 butterfly closures

• X 1 notebook

• X 1 small pencil

• X 1 medical tape roll (4.5ml

• X 1 elastic bandage roll (4.5m)

• X 1 dressing bandage (18cm x 18cm)

• X 4 sterile gauze pads (7.5cm x 7.5 cm)

EMERGENCY BIVY MTN-LAB-BVY

If things go sideways and you are forced to spend a night out in the woods the Mountain Lab emergency bivy could be a crucial element for your survival. This extremely lightweight and ultra-compact bivy is made from aluminum coated polyethylene which is designed to reflect up to 90% of your body heat back to you. Take it with you wherever your next adventure leads.

FEATURES:

• Length: 213 cm (84”)

• Width: 91 cm (36”)

• Weight: 120 g (4.2 oz)

• Packed Size: 10 cm (4”) long x 6 cm (2.5”) diameter

• Waterproof

• Windproof

• Ultra-compact

• Mountain Lab bright orange emergency colour

• Polyethylene aluminum coated tear resistant material

EXHALE BIVY EMERGENCY BREATHABLE SLEEPING BAG

ML-BVY-BR

Our premium Exhale Bivy is waterproof, windproof and—unlike most other emergency blankets and bivvies—is also breathable.

The Exhale Bivy uses a four-ply material developed by NASA to breathe effectively yet still reflect 70-90% of a person’s body heat. The advanced material is much stronger than a typical lightweight emergency bivy or blanket.

SPECIFICATIONS:

• Length: 240 cm (94”)

• Width: 75 cm (30”) at the shoulders 55 cm (22”) at the feet

• Weight: 190 g (6.7 oz)

• Packed Size: 16.5 cm (6.5”) long x 10 cm (4”) diameter

FEATURES:

• Waterproof, windproof and breathable material

• Sealed seams

• ¼ side zip for easy entry

• Hood with drawstring closure to seal out drafts 14 WINTER 2024

HEATED GLOVE LINERS

MTN-LAB-HGL XS - 2XL

Say goodbye to cold fingers with these battery-powered, heated glove liners. Flexible heating elements wrap around all five fingers for warmth, and a built-in controller provides three heat settings to dial in the right amount of heat. The fabric is a soft, stretchy polyester/ spandex blend for a comfortable fit with unimpaired dexterity.

Each glove liner is powered by a lightweight, rechargeable 1800 mAh battery inserted into the cuff.

For use without gloves, the thumb and forefinger are compatible with touch screens.

HEAT SETTING TEMPERATURE DURATION

Low 38˚C (100˚F) 5 hours

Medium 45˚C (113˚ F) 3 hours

High 55˚C (131˚F) 1.5 hours

HEATED GLOVE LINERS SPARE BATTERY

MTN-LAB-HGL-BA

One spare 1800 mAh battery for the Heated Glove Liners. Comes as a single unit. NOTE: Two batteries are required to power a pair of Heated Glove Liners.

HEATED GLOVE LINERS

REPLACEMENT CHARGER

MTN-LAB-HGL-CH

A replacement charge adapter and cables for one pair of Mountain Lab Heated Glove Liners.

15 MSD | DEALER CATALOGUE MOUNTAIN LAB
$149.99 $29.99 $21.99

MOUNTAIN LAB HEATED SOCKS

Mountain Lab heated socks provide warmth on demand, right where you need it. A low-profile heating element completely encircles the toes and forefoot area. The element is powered by a lightweight battery housed at the top of the cuff, where it won’t interfere with tall boot cuffs.

The socks use a 50% wool, 50% polyester blend for continuous warmth and comfort, even in damp conditions or when the socks are not powered on. Left and right markings on the socks help with easy identification.

$149.99 $179.99

REMOTE CONTROL HEATED SOCKS

ML-HS-RC-SIZE

The Remote Control Heated Socks can be operated individually by using a button on the sock battery itself (located at the cuff of the sock) or together with use of the included remote control.

The remote control allows the sock heat to be turned on or off, and the heat level to be adjusted between three intensity settings: Low, Medium and High.

Remote control heated socks spare batteries (2) and remote ML-HS-RC-BA $49.99

Two spare batteries and one remote for the Remote Control Heated Socks. Comes as a pair to power both socks.

Remote control heated socks replacement charging cable ML-HS-RC-CH $19.99

A replacement USB to dual micro-USB splitter charging cable (can be used with any standard household 5V USB charging adapter) for one pair of Remote Control Heated Socks.

BLUETOOTH HEATED SOCKS ML-HS-BT-SIZE

SIZE CANADA/US WOMEN SHOE SIZE CANADA/US MEN SHOE SIZE

SMALL 4-6MEDIUM 7-9 6-8

LARGE 10-12 9-11

X-LARGE - 12-14

The Bluetooth Heated Socks use the Mountain Lab smartphone app to control the heated socks through Bluetooth connectivity. Each sock can be controlled individually for heat intensity and turned on and off.

The Bluetooth Heated Socks can alternatively be controlled by a button located on the cuff of the sock, for use without the app.

Bluetooth heated socks spare battery ML-HS-BT-BA $29.99

One spare battery for the Bluetooth Heated Socks. Comes as a single unit. Note: Two batteries are required to power a pair of Bluetooth Heated Socks.

Bluetooth heated socks replacement charging adapter ML-HS-BT-CH $14.99

A replacement charging adapter and splitter charging cable for one pair of Bluetooth Heated Socks.

16 WINTER 2024 MOUNTAIN LAB

PEAMOUTH DRY BAGS

These compact, waterproof dry bags are so versatile, there’s no reason to ever leave them behind when you head out on adventure.

Our 2 litre and 5 litre Peamouth Dry Bags are small and lightweight—perfect for organizing and waterproofing important items like electronic devices, keys, wallets and more. They feature an oval profile for more efficient packing.

The 10 L Peamouth Dry Bag is sized to fit Mountain Lab kits (including first aid kits) for an additional layer of protection from the elements.

These dry bags can go inside a pack, duffel or tunnel bag, or they can also be used on their own for light duty use.

Peamouth Dry Bags are made from lightweight yet durable PU-coated nylon.

$14.99 $19.99 $24.99

2 L PEAMOUTH DRY BAG ML-DB-PM-2L

$169.99

BULL TROUT 25 L BACKPACK

ML-BP-BT-25L

When your adventure gets really nasty, you’ll want to be prepared with the Bull Trout Backpack. This pack is 100% waterproof submersible and comfortable to carry all day long. It’s perfect for travel or outdoors adventure in any conditions.

The main waterproof zipper is a faster and more convenient way to access the inside than a traditional dry bag roll top. It also creates a better seal.

The Bull Trout backpack is made from tough and durable 840D single-coated TPU for 100% submersible waterproofness and is PVC-free.

FEATURES

EXTERIOR

• 100% waterproof submersible

• Sturdy grab handles top and side

• Padded back and shoulder straps for all day comfort

• Waterproof zipper

• Water bottle carry pouch

• Gear attachment rack

INTERIOR

• Padded bottom to protect contents

• Inside sleeve for organization

• Mesh zippered compartment for small items

• 25 litre capacity

5 L PEAMOUTH DRY BAG ML-DB-PM-5L 10 L PEAMOUTH DRY BAG ML-DB-PM-10L

17 MSD | DEALER CATALOGUE MOUNTAIN
LAB

KOKANEE DRY BAGS

Mountain Lab Kokanee Dry Bags are bigger and tougher than our lightweight Peamouth bags. These stand-alone waterproof dry bags can carry more gear and withstand the abuse of rattling around in the bed of your SxS or truck, or loose in the bottom of your fishing boat.

Kokanee Dry Bags use a tough, 400D single-coated TPU that maintains flexibility even in the cold and won’t become brittle and break down over time like PVC.

FEATURES

• Quick access exterior pocket with waterproof zipper

• Shoulder strap(s) for easier carrying

• Roll top closure doubles as an easy grab handle

$34.99 $44.99 MOUNTAIN LAB

KOKANEE

15 L DRY BAG

ML-DB-KK-15L

The Kokanee 15 L features a single removable sling strap and a 15 litre volume.

KOKANEE 30 L DRY BAG

ML-DB-KK-30L

The Kokanee 30 L features two backpack-style shoulder straps and a larger, 30 litre volume. The roll top closure may be secured at the sides or at the top to create a quick grab handle.

GEAR TRUNK 120 L

WATERPROOF DUFFEL BAG

ML-DB-GTNK-120

Whether you’re setting out on a road trip or simply heading out for a ride, the Gear Trunk 120 L is designed specifically to carry the riding gear you need most.

The Gear Trunk duffel uses a durable, fully-waterproof 1680D TPU material to keep snow, rain and mud on the outside. Wet gear thrown inside won’t soak through either.

The Gear Trunk has been carefully designed to organize and carry exactly what you need for riding. It features three specialized compartments:

Helmet compartment

• Soft lined to protect the finish on your helmet

• Big enough for full face and modular helmets

Boots compartment

• TPU lining makes it easy to wipe up dirt, mud and water

• Long enough for motocross boots, wide enough for snowmobile boots

Main compartment

• Four elasticized pouches to organize devices such as radio, avalanche transceiver, GPS, satellite communications, etc.

• A zippered, waterproof pocket for important items like keys, phone, wallet

• Two soft-lined protective goggle pockets

• Capacity for other items such as gloves, balaclava, neck brace, etc

SPECS

• 90 cm (36 in.) long

• 44 cm (17 in.) wide

• 30 cm (12 in.) tall

• 120 litre volume

$189.99 18 WINTER 2024

SCORCHER INSULATED WATER BOTTLE

Mountain Lab Scorcher Insulated Water Bottles feature a cup lid that allows your hot beverage to cool to just the right temperature before sipping. The cap features an improved pouring closure that is easier to use and clean and is less messy.

These double-wall insulated Water Bottles are constructed of food-safe 18/8 stainless steel that is durable, rustproof and BPAfree. They are leakproof and sweatproof.

Scorcher Water Bottles will keep beverages hot for up to 12 hours or cold for up to 24 hours.

Mountain Lab Gear Scorcher Insulated Water Bottles come in two sizes—500 ml and 1000 ml.

$119.99

TOWER BOOT DRYER ML-BD-TW

The Tower Boot Dryer features four drying towers that can be extended to accommodate larger items such as snowmobile boots and large gloves with gauntlets. It delivers a steady, warm airflow that provides 80% faster drying efficiency without the risk of overheating or damaging your expensive riding gear.

The dryer can be set to run from 30 minutes to 3 hours and will turn off automatically when done. It can be operated with or without heat.

Folding feet with anti-slip pads are designed to collect wet runoff and well as provide stability. The feet fold away for compact storage.

The Tower Boot Dryer plugs into a standard 110 v household electrical outlet and features both fuse and overheat protection for safety.

SCORCHER WATER BOTTLE W/LID 500ML BLACK ML-WBS-500-BK

$19.99 $22.99

SCORCHER WATER BOTTLE W/ LID 1000ML BLACK ML-WBS-1000-BK

19 MSD | DEALER CATALOGUE MOUNTAIN LAB

CLASSIC BALACLAVA

MTN-LAB-BLC

Our newest balaclava is also the most simple. It features a classic, oval-shaped opening for those who don’t care for an overlapping hinged hood.

LIGHTWEIGHT BALACLAVA

MTN-LAB-BL1

The Lightweight Balaclava adds an overlapping hinged hood to help the user to customize the perfect amount of facial coverage without any material bunching.

SUNSET MTN-LAB-NTS

BLACK MTN-LAB-NTB

MIDWEIGHT BALACLAVA

MTN-LAB-BL2

Also featuring a hinged hood, the Midweight Balaclava uses a wind-stopper fabric in the nose, cheeks, chin and neck areas to provide additional protection for the skin on very cold days. A mesh breathing port allows for good air exchange while protecting the lips from the cold.

DAYBREAK MTN-LAB-NTD MOUNTAIN LAB

MOUNTAINS

MULTIFUNCTIONAL NECK TUBE

The Multifunctional Neck Tube will be your new best friend. This versatile piece can be worn as a face covering for ripping trails or around the neck to seal out snow and cold drafts in the mountains. The soft, midweight polyester/spandex blend is super-stretchy with a brushed inside, providing a very comfortable fit for long days of riding.

MTN-LAB-NTM $14.99 $16.99 $19.99 $14.99 20 WINTER 2024
GOGGLE COVER Mountain Lab Goggle Covers are designed to quickly throw on and protect your goggle lenses during transport. Made of super stretchy, quick drying microfiber. One size fits most. STEALTH MTN-LAB-GSK1 MOUNTAIN MTN-LAB-GSK3 BRAAAP MTN-LAB-GSK2 TRACKS MTN-LAB-GSK4 MOUNTAIN SLEDDER1 MTN-LAB-GSK5 MOUNTAIN SLEDDER2 MTN-LAB-GSK6 BACKCOUNTRY TOQUE MTN-LAB-TBC 100% Acrylic Black/Grey TOWNIE TOQUE MTN-LAB-TTW 100% Acrylic Navy Blue HEAVY-DUTY TOQUE MTN-LAB-THD 30% Wool/35% Nylon/35% Acrylic Heather Grey $24.99 $14.99 $24.99 $24.99 21 MSD | DEALER CATALOGUE MOUNTAIN LAB

$399.99

SLATWALL FLOOR DISPLAY RACK

ML-DISP-SLW-FLR

The Mountain Lab Slatwall Floor Display Rack is a tall, H-shaped floor display rack on caster wheels for easy placement.

Rack Dimensions:

• 200 cm (78 in.) tall useable slatwall

• 60 cm (24 in.) wide centre sections

• 60 cm (24 in.) wide sides

The centre slatwall sections are reinforced with metal inserts for increased durability when loaded with shelves and heavy items.

Each Display Rack comes with 4 Mountain Lab branded black, powder-coated metal shelves, 20 Mountain Lab branded black metal hooks and a logo sign.

$29.99

SLATWALL DISPLAY SHELVES 24” (2 PCS)

ML-DISP-SLW-SH24

Mountain Lab branded Slatwall Display Shelves can be used to add additional versatility to the Slatwall Floor Display Rack, or used separately with existing slatwall display panels.

These are 60 cm wide (24 in.) black, powder-coated metal printed with Mountain Lab logo, and are packaged in pairs.

$19.99

SLATWALL DISPLAY HOOKS 10” (5 PCS)

ML-DISP-SLW-HK10

Mountain Lab branded Slatwall Display Hooks can be used with the Mountain Lab Slatwall Floor Display Rack or with any standard slatwall display to add more hanging capability.

These black, powder-coated metal hooks are printed with the Mountain Lab logo, and are sold in packages of 5 pieces.

SLATWALL LOGO SIGN

ML-DISP-SLW-LGSN

The Mountain Lab branded Slatwall Logo Sign can be mounted on any standard slatwall to help customers easily identify and locate Mountain Lab products in the retail showroom.

The logo sign is 46 cm (18 in.) wide by 20 cm (7.75 in.) tall.

22 WINTER 2024 MOUNTAIN LAB

$39.99 $49.99 MOUNTAIN LAB

FLOOR DISPLAY 2.0

MTN-LAB-DIS5

$9.99

GOGGLE COVER DISPLAY

MTN-LAB-DIS3

COUNTERTOP DISPLAY

MTN-LAB-DIS1 23 MSD | DEALER CATALOGUE
24 WINTER 2024 MOUNTAIN LAB

SHOP TOOLS AND DOLLIES

25 MSD | DEALER CATALOGUE
KRANKEM

HEAVY DUTY SNOWMOBILE SHOP DOLLIES

KR-SD1

TRANSPORTER SNOWMOBILE DRIVEABLE DOLLY SET

KR-SD3

A completely redesigned driveable snowmobile dolly set which is extremely simple to use and allows you to drive your snowmobile on a variety of surfaces without damaging your skis, shop floor, grass, or trailer.

• Extremely simple and effortless use.

• Position on the ski loop helps to limit the dolly sliding back and forth while in use

• 7mm steel for increased stiffness

• Oversized PU wheels for driving on all surface conditions.

• Design avoids possible pinch points

• Universal design fits snowmobile skis up to 8” in width.

• 7” Rubber Wheels

• Durable Powdercoat Finish

• Maximum capacity of 300 Kg.

• Carries up to 1500 lbs (682 kgs).

• Set of 3 roller dollies. One 7” x 7” (180mm x180mm) dolly for under the rear track and two 8.25” x 10” (210mmx 255mm) steel dollies grooved to fit under skis.

• Heavy duty swivel casters allow for easy manoeuvring around your shop.

• Powder coated steel plates are strong, durable, and corrosion resistant.

• V-slide ski dollies feature a rubber pad to prevent slipping and protect your skis.

26 WINTER 2024 KRANKEM
27 HIGHMARK # GETHOMESAFELY * ROB ALFORD * CODY BORCHERS * CHRIS BROWN * JEREMY HANKE * DUNCAN LEE * CODY MCNOLTY * ANDREW MUNSTER * NADINE OVERWATER * CURTIS PAWLIUK * REAGAN SIEG * RILEY SUHAN * LOGAN THIBODEAU * BRETT TURCOTTE * KHAN YONG GEE THE CHOICE OF PROFESSIONAL SNOWMOBILERS
28
HIGHMARK

$899.99

CHARGER X R.A.S. AVALANCHE AIRBAG VEST

The Charger X R.A.S. Avalanche Airbag Vest is designed for hard-charging snowmobilers who demand the protection of both a tek-vest and an avalanche airbag.

• VOLUME: 16L

• Weight with Airbag & Cylinder: 6.85 lbs

• Weight without Cylinder: 5.3 lbs

• Cylinder Weight: 1.55 lbs

• Removable Airbags System (R.A.S.)

• Reliable compressed air inflation system (Snowpulse 3.0)

• Right-side trigger handle

• Exterior shovel blade and handle carry

• Wrap-around kidney protection

• Built-in chest protection

• Internal compartment for avalanche equipment

• Radio pocket and attachments

29 MSD | DEALER CATALOGUE HIGHMARK
SOLD SEPARATELY 2610-01782-0067-116 (L/XL)
CYLINDER

$949.99

PRO P.A.S. AVALANCHE AIRBAG PACK

CYLINDER SOLD SEPARATELY

The best-selling Pro P.A.S. pack is the workhorse –comfortable, premium protection and featuring intelligent design that backcountry snowmobilers will fully appreciate.

• VOLUME: 22L

• Weight with Airbag & Cylinder: 6.05 lbs

• Weight without Cylinder: 4.5 lbs

• Cylinder Weight: 1.55 lbs

• Protection Airbags System (P.A.S.)

• Reliable compressed air inflation system (Snowpulse 3.0)

• Right-side trigger handle

• Exterior shovel blade and handle carry

• Secure-lock belt

• Internal compartment for avalanche equipment

• Radio pocket and attachments

• Fleece-lined goggle pocket

• Adjustable height hip belt (one size fits most)

• Two main stow pockets

30 WINTER 2024 HIGHMARK 2610-01761-0067-1022

SOLD SEPARATELY $949.99

SPIRE P.A.S. AVALANCHE AIRBAG VEST

The SPIRE Vest is the avalanche airbag vest snowmobilers love. The absolute lightest vest on the market provides uncompromising comfort combined with the P.A.S. System, affording the wearer the ultimate in avalanche protection.

• VOLUME: 18L

• Weight with Airbag & Cylinder: 6.65 lbs

• Weight without Cylinder: 5.1 lbs

• Cylinder Weight: 1.55 lbs

• Protection Airbags System (P.A.S.)

• Reliable compressed air inflation system (Snowpulse 3.0)

• Lightweight material

• Right-side trigger handle

• Exterior shovel blade and handle carry

• Fully covered, durable front zipper

• Internal compartment for avalanche equipment

• Radio pocket and attachments

• Adjustable side straps (2 per side) allows for a SM-3XL Fit

• Three front pockets

31 MSD | DEALER CATALOGUE HIGHMARK
2610-01602-0067-118
CYLINDER

CYLINDER SOLD SEPARATELY $649.99

RIDGE R.A.S. AVALANCHE AIRBAG PACK

The Highmark Ridge is compact, super-lightweight and is the avalanche airbag designed for the snowmobiler who doesn’t want to feel like they’re wearing an avalanche airbag.

• VOLUME: 15L

• Weight with Airbag & Cylinder: 5.5 lbs

• Weight without Cylinder: 3.95 lbs

• Cylinder Weight: 1.55 lbs

• Removable Airbags System (R.A.S.)

• Reliable compressed air inflation system (Snowpulse 3.0)

• Right-side trigger handle

• Exterior shovel blade and handle carry

• Secure-lock belt

• Internal compartment for avalanche equipment

• Radio pocket and attachments

32 WINTER 2024 HIGHMARK
2610-01582-0067-115

ACCESSORIES

PRODUCT USAGE

Snowpulse Series 2.0 Cylinder FULL

CYLINDER

Snowpulse Series 2.0 Cylinder

Snowpulse Series 2.0 Cylinder EMPTY

Burst Discs - 3 Pack

4500psi Carbon Tank

3300psi 100L SCUBA Tank

SCUBA Yoke Fill Adapter

SCUBA High Pressure Refill Connect

PART # PRICE

Use with any Highmark avalanche airbag, comes with 3 Burst Discs 2610-00840-9999-1 $224.99

Use with any Highmark avalanche airbag, comes with 3 Burst Discs 2610-00850-9999-1 $224.99

Needed to refill Series 2.0 Cylinders 2610-00470-9999-1 $24.99

Partners with SCUBA High Pressure Refill Connect (MSD-SCBAPB). Stand alone approximately 8-10 fills, partnered with 3300psi tank approx. 25 fills

MSD-SCBA-4500

Stand alone fills approximately 4 cylinders, two tanks fills approximately 12-16 cylinders. AL100BK

Connect partners with 3300psi 100L Tank MSD-SCPB

Connect partners with 4500psi Carbon Tank MSD-SCAPB

33 MSD | DEALER CATALOGUE
HIGHMARK
HIGHMARK

AIRBAG COMPARISON

34 WINTER 2024
HIGHMARK

HIGHMARK

LIGHTER. SMARTER. BETTER.

Ultralight, ultracompact avalanche airbags. Featuring an intuitive handle with adjustable height, new user-friendly set-up and the lightest, most compact system ever designed.

HANDLE 3.0

In an emergency situation, deployment of the airbag needs to be fast and intuitive. Studies have shown that in an extreme situation, many users are over-challenged and do not manage to activate the airbag.

Snowpulse’s new deployment handle is more intuitive to operate and is also height-adjustable to allow it to be adapted to the wearer’s body height. The deployment handle is now a bright orange color to make it even more visible. There is no change to the tried-and-tested “T” shape of our deployment handle. The handle can be folded to allow compact storage in the shoulder strap. As with all Highmark by Snowpulse packs, the handle is located on the RIGHT SHOULDER—this allows snowmobilers to keep their hand on the throttle while deploying the pack.

INFLATION SYSTEM 3.0

The Inflation System 3.0 describes the component used to deploy the airbag. The system activates the deployment mechanism which opens the pressure cartridge with a pin and fills the airbag. The integrated air volume amplifier also sends ambient air to the airbag in addition to the gas stored in the pressure cartridge.

One of Snowpulse’s objectives for the new development was to bring the air volume amplifier and deployment mechanism together in a single housing in order to save space and weight. The inflation system is reliable, low-maintenance and extremely user-friendly: just screw the cartridge in and you’re ready to go!

WEIGHT

The Snowpulse 3.0 is Snowpulse’s lightest airbag system of all time and weighs less than 1 liter of water. At less than 1kg, this is one of the lightest systems on the market today.

RELIABILITY

Always ready in an emergency: any condition ready. The avalanche airbag is a piece of safety equipment that needs to work with 100% certainty and reliability in an emergency – irrespective of weather, temperature and external pressure.

Only pressure cartridges offer precisely the reliability of a dependable energy store over a period of years. This technology also guarantees a very high initial pressure to unfold the airbag reliably even in situations of external loading. Our focus in the latest development was on making the system even more user-friendly and further reducing maintenance.

COMPATIBILITY

The new Airbag 3.0 generation is NOT compatible with previous seasons of backpack models from generations 1.0 and 2.0.

The Airbag 3.0 backpacks are also NOT compatible with the Protection Airbag / Removable Airbag systems from generation 2.0 (From 2011/2012 up to and including 2015/2016).

The new Airbag 3.0 systems can be installed only in 3.0 backpacks from season 2016/2017 onwards! However, the 2.0 cartridges remain unchanged and can be used with both the new 3.0 system and the older system.

35 MSD | DEALER CATALOGUE
<

PROTECTION AIRBAG SYSTEM (P.A.S.) VS. REMOVABLE AIRBAG SYSTEM (R.A.S.)

The R.A.S. system is a square 150L airbag that is contained in and deploys from the top of the pack. It is extremely lightweight and has a low packing volume, taking up less space in your pack.

The P.A.S. system is a collar-shaped airbag that is contained in and deploys from the shoulder harness of the pack, and is focused on providing maximum protection from burial as well as trauma protection.

Highmark Protection Airbag System (P.A.S.)

Highmark Removable Airbag System (R.A.S.) ca 870g (1.92 lbs) ca 850g (1.85 lbs)

P.A.S.

Up to 38% of avalanche fatalities are due to trauma to the avalanche victim. Highmark by Snowpulse is the only manufacturer to offer an airbag to snowmobilers capable of providing trauma protection.

In an emergency, only the Protection Airbag System unfolds protectively around the head, neck and chest area, increasing your chances of survival in two respects: offering the best possible protection from burial and from life-threatening trauma injuries.

Trauma Protection

Head on Top

36 WINTER 2024 HIGHMARK
THE INFLATION SYSTEMS
Increased chance of survival
Protects the wearer‘s head, neck and chest area Head on Top Can keep the head and upper body on the surface Removable Remove entire airbag system from backpack Simple & Safe Simple and intuitive operation
&
Light and very compact airbag system
Trauma Protection
Light
Compact

POWERFUL SEARCH. EASY HANDLING.

FAST RESCUE.

Performance brings benefits only if the user can tap into it as simply as possible. Mammut has created a revolutionary operating system in the Barryvox, from front to back. From an easy-to-read display to buttons that can be operated even wearing gloves, shock-proof and break-proof housing, intuitive acoustic search guidance and a revolutionarily simple visual interface, the Barryvox® shows that powerful performance does not need to be complicated.

THE ABSOLUTE BEST IN AVALANCHE SAFETY.

37 MSD | DEALER CATALOGUE MAMMUT

One hand operation

Easy to operate wearing gloves and with one hand

Main switch (OFF, SEND, SEARCH) with SafeLock function to prevent accidental switching off or switching from SEND to SEARCH

SafeLock

Prevents activation of SEARCH mode in the carrying system

Quickly Adjustable

Can be quickly and easily adjusted to the size of the user’s body

BarryLeash

Easily secure the Barryvox® to your wrist or the BarryMount while searching

BarryMount carrying system

The BarryMount is a high-quality carrying system for your Barryvox® or Barryvox® S. It is easy to carry, and can be quickly adjusted and opened or closed using one hand. The carrying system almost completely rules out accidental activation of search mode, increasing your safety in the terrain. It protects the device from mechanical damage, whether on tours or during transport. At the end of the season, you can simply wash the carrying system in the washing machine at 30 degrees. Clean and ready to go.

SEARCH STRIP WIDTH OF 70 METERS

Large, clearly arranged display

AVALANCHE SAFETY

POWERFUL SEARCH

Search strip width of 70 m. Or why performance can save lives

If you measure an avalanche transceiver on its performance, there is one value that stands out: the Larger, circular receiving bandwidths mean that buried transmitters are detected faster, search strips search paths over the avalanche deposit shorter and victims are found faster.

With a search strip width of 70 meters (digital mode) and a reliably usable receiving bandwidth of up the Barryvox® is a among the top devices worldwide.

Ergonomic

We insist on maximum performance, because we know: performance that saves time saves lives.

device design for easy handling with clear controls

The new generation of the Barryvox® has a large, safely usable search strip of 70 meters.

This high performance reduces the search path over the avalanche deposit and therefore shortens the

Speed is a decisive factor in a successful rescue.

Larger, circular receiving bandwidths mean that buried transmitters are detected faster, search strips are wider, search paths over the avalanche deposit shorter and victims are found faster. With a search strip width of 70 meters (digital mode) and a reliably usable receiving bandwidth of up to 70 meters, the Barryvox® is among the top devices worldwide.

We insist on maximum performance, because we know: performance that saves time saves lives.

38 WINTER 2024 MAMMUT

Design: ergonomic design, impact-proof and break-proof. Can be operated wearing gloves
Display: display with background lighting, easily understandable even when wearing polarized glasses
Visual interface: shows the distance, direction and number of buried subjects
Acoustic search guidance: allows the rescuer to visually search the avalanche field while listening to audio signals from the device
Group test with clear instructions
Multiple buried subjects: digital signal processing in the event of several buried subjects
Marking function: buried subjects are listed and can be marked BARRYVOX® S AND BARRYVOX® Technical Features Type: Digital 3-antenna device Range approx.: up to 70 m Search strip width: 70 m Dimensions: 115 mm x 67 mm x 27 mm Weight: 205 g (including batteries) Batteries: Alkaline (3 x AAA 1,5 Volt) Battery life: Alkaline: At least 300 hours SEND W-Link frequency: 869.8 MHz (Europe) / 916-926 MHz (North America) Transmitting frequency: 457 kHz Standard: EN 300718 Warranty: 5-year Mammut warranty BARRYVOX® S 2710-00140-1012-1 HIGH-END TRANSCEIVER WITH ANIMATED INSTRUCTIONS.
100% Made in Switzerland, developed and produced in Switzerland $549.95 39 MSD | DEALER CATALOGUE MAMMUT
Digital/analog combo device with three antennas. The Barryvox® S has a large receiving bandwidth and an effective search strip width of 70 meters. It offers users a large, simple interface and intuitive operation. The Smart Search function provides clear instructions thanks to a simple operating concept and quick, precise searching. The Barryvox® S includes the Rescue SEND function to protect non-searching rescuers. In the event of a secondary avalanche, the device automatically switches to SEND in order to locate buried rescuers. The Barryvox® S is also equipped with a Smart Search function, which interacts with the actions of searching rescuers.

• Search strip width: effective digital search strip width: 70 meters

• Receiving bandwidth: digital receiving bandwidth: up to 70 meters

• Circular receiving field: almost identical receiving bandwidth for the X and Y antennas

• Reverse direction function to avoid 180-degree search errors

• Automatic switching from send to search (Auto Revert): if a rescuer does not move for 4 minutes, the device assumes a secondary avalanche and the device switches to SEND mode (motion-sensor controlled)

• Attachment: including highly functional BarryMount carrying system

• Alkaline battery life: around 300 hours on SEND, followed by 1 hour on SEARCH

• Device tests: automatic self-test, frequency check, and function test

• W-Link: additional communication channel for better search performance

• Software: updatable software

• Fleet management: manage the device fleet via W-Link

• Operating temperature: -25° to +45° Celsius (-13° to +113° Fahrenheit)

BARRYVOX®

2710-00150-1012-1

Technical Features

Type: Digital 3-antenna device Range approx.: up to 70 m

Search strip width: 70 m

Dimensions: 115 mm x 67 mm x 27 mm

Weight: 205 g (including batteries)

Batteries: Alkaline (3 x AAA 1,5 Volt)

Battery life: Alkaline: At least 300 hours SEND

W-Link frequency: 869.8 MHz (Europe) / 916-926 MHz (North America)

Transmitting frequency: 457 kHz

Standard: EN 300718

Warranty: 5-year Mammut warranty

INTUITIVE TRANSCEIVER FOR FASTER AND EASIER SEARCH

A digital three-antenna device reduced to the essential functions. The Barryvox® scores well on simple navigation and clear instructions. With a large receiving bandwidth and an effective search strip width of 70 meters, it offers users a simple interface and intuitive operation. From an easy-to-read display to buttons that can be operated even wearing gloves, shockproof and break-proof housing and a revolutionary simple visual interface, the Barryvox® shows that powerful performance and sophisticated search guidance do not need to be complicated.

40 WINTER 2024
$384.95
MAMMUT

70 meters,

safely usable search strip of 70 meters. the avalanche deposit and therefore shortens the search time.

KEY DIFFERENCES BETWEEN THE BARRYVOX & BARRYVOX S

Larger Screen (2.2” vs. 2”): easier to see & read, even with the lighting is bad.

Dynamic Screen Icons: the icons move as the searcher does, indicating exactly what the searcher should be doing (i.e. Is the icon running? The searcher should be doing a quick coarse search. Is it crawling? Time for a pinpoint search).

Smart Search: though the user never sees this feature, it operates in the background and makes searching more efficient than ever even if the searcher is less than perfect.

Auto Guidance: no more signal overlap from other transceivers. No more stop stand still. Just a one-track path to the buried victim.

Lithium Batteries: the Barryvox S can utilize Lithium batteries or alkaline batteries. Lithium batteries last longer, are lighter and don’t damage with acid corrosion.

FEATURES

Barryvox® S Barryvox®

Powerful Search – search strip width of 70 m. W hy performance can save lives.

Maximum range Up to 70 m digital / 95 m analog Up to 70 m digital

Search strip width 70 m digital / 100 m analog 70 m digital

Number of antennas 3 3

Batteries (3 x AAA) Alkaline, Lithium Alkaline

Operating temperature range -25 °C – +45 °C | –13 °F / +113 °F -25 °C – +45 °C | –13 °F / +113 °F

Frequency check

Easy Handling – completely revised user interface. Why simpler is often safer.

User navigation 12 languages Symbolically Display 2.2 inch fully graphic dynamic 2.0 inch segment

Acoustic Guidance Group check Self test

Illuminated display

Personalization

Smart Search. Why direct guidance gets you to your target faster.

Smart Search

Auto-Guidance

Reverse direction function

Multiple burials Marking function Unmark Mark

Scrolling in the list of buried subjects

Automatic revert to Send mode Rescue SEND

Pro Search (Analog)

Advanced search settings

Vital data

Software Update

Configuration changes

Fleet management

Fleet configuration

Additional functions for institutions and organizations.

Customized startup text and picture

Functional test with tester

victims are found faster. and a reliably usable receiving bandwidth of
to
know:
up
41 MSD | DEALER CATALOGUE MAMMUT

BARRYVOX® PACKAGE TOUR

$479.95 MAMMUT

The Barryvox® Package Tour includes all of the traditional pieces of avalanche equipment you need for snowmobiling: inside, you will find the Barryvox® avalanche transceiver, the new, light avalanche Probe 280 Speed Lock and the Alugator Ride SE shovel. The digital 3-antenna Barryvox® avalanche transceiver is distinguished by its extremely simple operation and clear instructions. The carbon Probe 280 is safe and easy to use, even when wearing gloves. And the packing volume is reduced to the minimum with the small, compact Alugator Ride avalanche shovel, which features a blade made of hardened, anodized aluminum.

PACKAGE INCLUDES:

• Barryvox®, digital 3-antenna avalanche transceiver

• Probe 280 Speed Lock, lightweight carbon avalanche probe

• Alugator Ride SE shovel made from hardened and anodized aluminum

2620-00190-1012-1 42 WINTER 2024

$84.95 NEW

280 SPEED LOCK

2620-00122-2228-1

Length: Collapsed: 45 cm / Extended: 280 cm

Tensioning System: Speed Lock System Diameter: 11 mm Segments: 7 Weight: 280 g

Features:

• Hardened, anodized aluminum shovel blade

• Straight blade back - perfect for cutting straight snow profiles

• Stabilization ribs for maximum stability Space-saving blade design

Attachment holes for snow anchor and rescue sled Oval telescopic shaft

• Automatic spring lock for quick, precise guidance during assembly

• Ergonomically shaped D-grip for optimum shovel control

• Sharpened, tilt-resistant blade with integrated steps

• Certification: UIAA 156 avalanche shovel standard

NEW

$114.95

CARBON 280 SPEED LOCK

2620-00102-2228-1

Length: Collapsed: 45 cm / Extended: 280 cm

Tensioning System: Speed Lock System Diameter: 13 mm

Segments: 7 Weight: 275 g

$89.95 NEW MAMMUT

320 SPEED LOCK

2620-00131-2228-1

Length: Collapsed: 45 cm / Extended: 320 cm

Tensioning System: Speed Lock System

Diameter: 13 mm

Segments: 8 Weight: 340 g

Features: Hardened, anodized aluminum shovel blade

• Attachment holes for snow anchor

• Straight blade back - perfect for cutting straight snow profiles

• Stabilization ribs for maximum stability

• Space-saving blade design

• Automatic spring lock for quick, precise guidance during assembly

• Oval telescopic shaft with integrated grip zone

Ergonomically shaped D-grip for optimum shovel control

Sharpened, tilt-resistant blade with integrated steps

Certification: UIAA 156 avalanche shovel standard

Features:

Stable, lightweight probe segment made from durable aluminum

• Extremely precise probe scaling on both sides

• Durable tensile tensioning cord for maximum stability of probe tensioning system

• Drop-shaped probe tip for energy-saving probing

• Suitable for use with gloves

• Practical probe cover with integrated emergency plan 43 MSD | DEALER CATALOGUE

$109.95

ALUGATOR PRO LIGHT HOE/SHOVEL

2620-00060-0001-1

Length: Collapsed: 68 cm / Extended: 91 cm

Shaft Length: Collapsed: 49 cm Blade: 24 cm x 27.5 cm Weight: 675 g

Shovel Positions: SCOOP & HOE

Features:

• Hardened, anodized aluminum shovel blade

• Straight blade back - perfect for cutting straight snow profiles

• Stabilization ribs for maximum stability

• Space-saving blade design

• Attachment holes for snow anchor and rescue sled

• Oval telescopic shaft

• Automatic spring lock for quick, precise guidance during assembly

Ergonomically shaped D-grip for optimum shovel control

Sharpened, tilt-resistant blade with integrated steps

• Certification: UIAA 156 avalanche shovel standard

$59.95

ALUGATOR RIDE 3.0

2620-00070-00516-1

Length: Collapsed: 61 cm / Extended: 86 cm

Shaft Length: Collapsed: 44 cm

Blade: 27.5 cm x 21.5 cm

Weight: 700 g

Shovel Positions: SCOOP

Features:

• Hardened, anodized aluminum shovel blade

Attachment holes for snow anchor

Straight blade back - perfect for cutting straight snow profiles

• Stabilization ribs for maximum stability

• Space-saving blade design

• Oval telescopic shaft

• Automatic spring lock for quick, precise guidance during assembly

• Ergonomically shaped T-grip for efficient transfer of strength

• Sharpened, tilt-resistant blade with integrated steps

Certification: UIAA 156 avalanche shovel standard

$89.95

ALUGATOR PRO LIGHT

2620-00140-2149-1

Length: Collapsed: 61 cm / Extended: 86 cm

Shaft Length: Collapsed: 44 cm

Blade: 27.5 cm x 24 cm Weight: 645 g

Shovel Positions: SCOOP

Features:

Hardened, anodized aluminum shovel blade

• Straight blade back - perfect for cutting straight snow profiles

• Stabilization ribs for maximum stability

• Attachment holes for snow anchor and rescue sled

• Oval telescopic shaft

• Automatic spring lock for quick, precise guidance during assembly

• Ergonomically shaped T-grip for efficient transfer of strength

Sharpened, tilt-resistant blade with integrated steps

Certification: UIAA 156 avalanche shovel standard

• Space-saving blade design

44 WINTER 2024 MAMMUT
45 CFR DEALER CATALOGUE

HANDLEBARS

BOONDOCKER 2.0 BAR

FLAT BLACK CFR-CD1.5

BLOOD RED CFR-CD3.6

HOT PINK CFR-CD12

GHOST WHITE CFR-CD3.5

BABY BLUE CFR-CD3.8

• 30” Width

• 14° Pullback

*Does not include bar pad.

FLURO ORANGE CFR-CD3.7

PURPLE CFR-CD3.4 GREEN CFR-CD3.9

GUN METAL GREY CFR-CD3.15

MATTE BROWN CFR-CD3.16

CROW BAR

FLAT BLACK CFR-CD15

GHOST WHITE CFR-CD15.1 BANANA YELLOW CFR-CD15.2

*Does not include bar pad.

ORANGE CRUSH CFR-CD15.3

MATTE TAN CFR-CD15.5

7/8” Diameter

• 30” Width

• 1” Rise

• 14° Pullback

• 7° Bend Up

• 37° Bar Ends

• 10° Forward Bend on Hooks

• Made From Hi-Grade 70-71 Aluminum

46 WINTER 2024 CFR

MUNSTER BAR BRETT TURCOTTE BAR

*Does not include bar pad.

*Does not include bar pad.

BLACK CFR-CD99 PINK CFR-CD99.2

Made from 7075 heat treated super aluminum with flex technology.

Better positioning than stock bars and way stronger! The cutting edge bends dissipate bumpy conditions better than stock bars keeping you fresh and riding longer!

WHITE CFR-CD99.3 BLUE BIRD CFR-CD99.4

• 2” Rise

• 29” Width 14° Degree Pull Back

• QR Technology

BLACK CFR-CD13.7 WHITE CFR-CD13.8 PURPLE CFR-CD13.3 GOLD CFR-CD13.9 RED CFR-CD13.6

When Brett started with Polaris he needed a new handlebar to work with the different dynamics of his whip. We went to the drawing board and lowered the rise to 1” because of the higher steering post design on the Polaris and narrowed the handlebar to 30” wide to Brett’s liking.

• 1” Rise

• 30” Width 14° Degree Pull Back

• QR Technology

47 MSD | DEALER CATALOGUE CFR
HANDLEBARS

FLAT BLACK CFR-CD41 YELLOW CFR-CD41.2

• 1 1/8”

MISFIT

Made

HARD ENDURO MOTO BARS

BLACK/RED - 1” CFR-CD100

BLACK/RED - 2” CFR-CD101

BLACK/RED - 3” CFR-CD102

BLACK/WHITE - 1” CFR-CD103

BLACK/WHITE - 2” CFR-CD104

BLACK/WHITE - 3” CFR-CD105

BLACK/ORANGE - 1” CFR-CD106

BLACK/ORANGE - 2” CFR-CD107

The CFR Hard Enduro Moto bar is designed to be able to take anything you can throw at it. Constructed to be both strong, yet damp,which allows for ultimate control and feel of what’s going on under the tires.

BLACK/ORANGE - 3” CFR-CD108

BLACK/GREY - 1” CFR-CD109

BLACK/GREY - 2” CFR-CD110

BLACK/GREY - 3” CFR-CD109

• 1 1/8” Clamp Diameter (Requires “Oversized triple clamps or bar mounts)

• Constructed from 7075 Aerospace Aluminum

• Anodized black finish for long lasting good looks

• Knurled left slide to prevent grip from slipping

• Includes high density foam pad.

48 WINTER 2024 CFR HANDLEBARS
Diameter
31” Width
3” Rise
8° Bend Up
14° Pullback
ORANGE CFR-CD41.3 BLUE CFR-CD41.4 *Does not include bar pad. SX SNOWBIKE BAR
OVERSIZED 1 1/8” CLAMP BLACK & WHITE CD600 BLACK & PINK CD601 FLAT BLACK/GREEN CFR-CD604 STANDARD 7/8” CLAMP BLACK & WHITE CD602 BLACK & PINK CD603 FLAT BLACK/GREEN CFR-CD605
BAR • 28” Wide
1/2” Rise
SDG Grip
13° pull back
9° Up.
handlebar bar with the
diameter grips
will
tremendously. The Misfit is available in
and
clamp.
for a narrow suppler
smaller
feature. The Misfit has a ½” rise to dampen the bar and we added the 2mm smaller diameter grips to the ends. Smaller riders, and pretty much everyone with smaller hands
enjoy this bar
both oversized 1 1/8”
7/8” standard

KERSTERKE BAR

BLACK CFR-CD400

*Does not include bar pad.

TEAL CFR-CD401

The Caleb Kersterke handlebar is Caleb’s design from end to end. The small diameter grip (SDG) area allows added grip strength to get out of tricky situations and less arm pump. The 1”/25MM rise lets you dial in your set up with less math. The oversized diameter clamp will keep things straight when plans change.

1 1/8” /28.6 Clamp

• 29” / 735mm Width

• 1” / 25mm Rise

• 12° Sweep

• 3° Rise

• Made from 7076 Aerospace Aluminum Tubing

HANDLEBARS

*Does not include bar pad. 29er BAR

BLACK CFR-CD500 RED CFR-CD501

GUN METAL GREY CFR-CD502

PURPLE CFR-CD503

• 1 1/8” /28.6 Clamp 29” / 735mm Width

• 1” / 25mm Rise

• 12° Sweep 3° Rise

• Made From 7076 Aerospace Aluminum Tubing

HANDLEBAR accessories

SIGNATURE GRIP

Designed to provide superior grip with minimal snow and ice buildup.

The graphic’s solid and raised sections provide superior comfort and traction so your hands stay right where you want them.

• Length: 6 1/4”

• Diameter: 7/8”

BLACK CFR-CD200

PURPLE CFR-CD201

BLUE CFR-CD202

RED CFR-CD203

ORANGE CFR-CD204

YELLOW CFR-CD205

GREEN CFR-CD206

WHITE CFR-CD207

HOT PINK CFR-CD208

FLURO ORANGE CFR-CD204.5 GREY CFR-CD209

NEW

HERO GRIPS

The New CFR Hero grip is the stickiest grip on the market. The soft durometer rubber keeps your hands where you want them.

Designed only to be used with smaller diameter handlebar. (SDG)

BLACK CFR-CD210

PURPLE CFR-CD211

BLUE CFR-CD212

RED CFR-CD213 ORANGE CFR-CD214

FLURO ORANGE CFR-CD215

YELLOW CFR-CD216 GREEN CFR-CD217 WHITE CFR-CD218 PINK CFR-CD219 GREY CFR-CD220

49 MSD | DEALER CATALOGUE CFR

HANDLEBAR accessories

BAR PAD

The CFR Bar Pads are designed to fit all CFR Handlebars or any oversized large diameter handlebars. The dual density foam will protect against sharp corners and hardware on riser.

GHOST WHITE CFR-CD30

BLOOD RED CFR-CD30.1

MONSTER GREEN CFR-CD30.2

HOT PINK CFR-CD30.3 BABY BLUE CFR-CD30.4

PURPLE CFR-CD30.5 ORANGE CFR-CD30.6 POLARIS ROUND CFR-CD30.7 BLACK OUT CFR-CD30.8

BAR PAD MINI

The CFR Bar Pad Mini has a sleeker, meaner and softer design to fit all CFR Handlebars and oversized adapters. The Dual Density foam will protect you against sharp corners and riser hardware.

BLACKED OUT CFR-CD31

WHITE CFR-CD31.1

PINK CFR-CD31.2 RED CFR-CD31.3

BLUE CFR-CD31.4 ORANGE CFR-CD31.5 GREEN CFR-CD31.6 PURPLE CFR-CD31.7

MOTO BAR PAD – LARGE

Designed to be used on dirt bikes without handguards, except for handguards that are connected to handlebars. The softer durometer rubber will absorb any unexpected hits you might encounter.

BLACKED OUT - CFR-CD32

WHITE - CFR-CD32.1 AUSTRIAN ORANGE - CFR-CD32.2 RED - CFR-CD32.3

MOTO BAR PAD – SMALL

Designed to fit snug between the bar clamps of most dirt bike oversized handlebars. The softer durometer rubber will soften the blow of an unexpected hit.

BLACKED OUT - CFR-CD70

WHITE - CFR-CD71 AUSTRIAN ORANGE - CFR-CD72 RED - CFR-CD73

CROWBAR PAD

The Crowbar Pad is for 7/8” non-oversized handlebars. Works great on the Crowbar, 29er and the new Misfit SD handlebar. The softer durometer rubber will soften the blow of an unexpected hit. The pad graphics will add some style to your handlebars.

GHOST WHITE CD33.1

BLACKED OUT CD33.2 BLOOD RED CD33.3

50 WINTER 2024 CFR

KNUCKS RISERS

1.25”

BLACK CFR-CD60

BLUE CFR-CD60.1

GOLD CFR-CD60.2

PURPLE CFR-CD60.3 2" BLACK CFR-CD29

BLUE CFR-CD29.5

GOLD CFR-CD29.1

PURPLE CFR-CD29.2 RED CFR-CD29.3

2.5" BLACK CFR-CD29.4

3” BLACK CFR-CD28

BLUE CFR-CD28.5

GOLD CFR-CD28.6

PURPLE CFR-CD28.7

RED CFR-CD28.8 3.5" BLACK CFR-CD28.9

4” BLACK CFR-CD07

BLUE CFR-CD07.5 GOLD CFR-CD07.1

PURPLE CFR-CD07.2 RED CFR-CD07.3

SIZE COLOUR PART #

5”

BLACK CFR-CD08

BLUE CFR-CD08.5

GOLD CFR-CD08.1

PURPLE CFR-CD08.2

RED CFR-CD08.3 6” BLACK CFR-CD09

BLUE CFR-CD09.5

GOLD CFR-CD09.1

PURPLE CFR-CD09.2 RED CD09.3 7” BLACK CFR-CD10

BLUE CFR-CD10.5 GOLD CFR-CD10.1

PURPLE CFR-CD10.2 8” BLACK CFR-CD11

BLUE CFR-CD11.5 GOLD CFR-CD11.1

PURPLE CFR-CD11.2

• CNC machined from high strength 6061 - T06 aluminum

• Graphics are laser etched for a durable, long-lasting look

• Will work with either 1-1/8” tapered bar or 7/8”bars (Adapter included)

• Patent pending 7/8” anti slip insert keeps bars where you want them

• Must have a pivot-style steering post or a double-pivot adapter

BLACK CFR-CD17

BLUE CFR-CD17.5

GOLD CFR-CD17.1

• Teardrop design prevents shearing

NEW

FTP

RISER SIZE

PART

Black CFR-CD700

Gold CFR-CD700.1

Purple CFR-CD700.2

Blue CFR-CD700.3

Black CFR-CD701

Gold CFR-CD701.1

Purple CFR-CD701.2

Blue CFR-CD701.3

Black CFR-CD702

Gold CFR-CD702.1

Purple CFR-CD702.2

CFR-CD702.3

CFR-CD703

CFR-CD703.1

CFR-CD703.2

CFR-CD703.3

CFR-CD704

Gold CFR-CD704.1

CFR-CD704.2

CFR-CD704.3

The new CFR FTP riser is designed to be used on Polaris snowmobiles with a flat top steering post. No other accessories required.

51 MSD | DEALER CATALOGUE CFR
OVERSIZE BAR ADAPTER
Universal Fit Allows oversized 1 1/8” snowmobile handlebars to be fastened to stock 7/8” snowmobile clamp
Colour PART #
PURPLE CFR-CD17.2 HANDLEBAR accessories
SIZE COLOUR PART #
COLOUR
# 2"
2"
2"
2"
2.5"
2.5"
2.5"
2.5"
3"
3"
3"
3" Blue
3.5" Black
3.5" Gold
3.5" Purple
3.5" Blue
SIZE COLOUR PART # 4" Black
4"
4" Purple
4" Blue

HANDLEBAR accessories

RIGID MOUNTAIN STRAP 2.0

CFR-CD16.75

Allows for a solid grab handle for tricky maneuvers and tandem snowmobiling.

MOUNTAIN STRAP

CFR-CD16

Mounts to most handlebars to allow a spot to grab for tricky manoeuvres or tandem snowmobiling

POLARIS MOUNTAIN STRAP

CFR-CD16.1

• The 12” Fabcraft Polaris handlebar Mountain Strap works flawlessly with the Chris Brown Signature Handlebar.

OTHER ACCESSORIES

PRODUCT PART #

NEW

Tether Clip CFR-CD80

Polaris T-Post CFR-CD19.5

Polaris Bar Mount Cap CFR-CD19.75

CFR Tunnel Armour CFR-1014

CFR Scrapers CFR-1012

CFR Super Straps 15” CFR-1013

CFR Super Straps 22” CFR-1013.5

8" Replacement Strap CFR-1001

16" Replacement Strap CFR-1002

TUBE ADAPTER

CFR-CD19

• 5-1/2” tube converts stock flat-style steering post to a pivot-style steering post Made of super-strong Chromoly steel with anodized black finish

• Attaches to stock handlebar clamps or any 7/8” handlebar attachment

• Positions pivoting-style risers on outside of stock handlebar clamps.

ARCTIC CAT ADJUSTABLE POST DELETE KIT

CFR-CD25

• Allows you to use your stock Arctic Cat steering post, but removes the height adjustable feature

Simply cut below adjustable part of steering post and install the new T-style billet block

• Eliminates 90% of the slop from the stock adjustable post and saves up to 1lb in weight

• Requires a riser of any height

HANDLEBAR HEATERS

GENERIC CURVED ENDS CFR-CD18 GENERIC SQUARE ENDS (POLARIS) CFR-CD18.1

• Universal high powered heaters that work on all snowmobiles

• Three-wire universal grip heater element kit with high/ low temperature features

Easily installed with 3M® self-adhesive backing tape

• Extended hook design extends over the hook of the bar to heat the back portion of the handlebar as well as the flat hand area

• A must when using aluminum handlebars to keep grips hot

Works with all 12V snowmobiles

• Sold by the pair

PLUG AND PLAY GRIP HEATERS

CFR-CD18

The CFR Plug and Play Grip Heaters for Polaris and Ski Doo are the easiest way to install your new handlebar set up. No splicing to connect your heaters just unplug your old set up and plug in your new heaters.

220mm Ladder Strap CFR-1003

Aluminum Ratchet CFR-1006

Bar Nuts CFR-CD50

SkiDoo Gen4 Cluster Relocate CFR-CD28.0

SkiDoo XM Cluster Relocate CFR-CD28.1

Knucks Riser Cluster Relocate CFR-CD28.3

OEM PART #

SKI DOO XM CURVED ENDS PP CFR-CD18.2

SKI DOO GEN 4 CURVED ENDS PP CFR-CD18.3

POLARIS 850 CURVED ENDS PP CFR-CD18.4

POLARIS 850 SQUARE ENDS PP CFR-CD18.5

POLARIS 800 CURVED ENDS PP CFR-CD18.6

POLARIS 800 SQUARE ENDS PP CFR-CD18.7

52 WINTER 2024 CFR

Tunnel Racks

LINK-IT-UP 2.0 SR (SMALL RACK)

CFR-TR08

• Designed to be used with Boardski 2.0 Brackets

• 3mm Aerospace Aluminum Side Plates

• UV-resistant black anodized coating

• 20mm-3/4” tubes bolt together plates

• Link It Up rack (SR) is fastened to the snowmobile using two cargo base kits (one on each side of the rack) and allows other accessories to be used on the back of your snowmobile tunnel.

LINK-IT-UP 2.0 LR (LARGE RACK)

CFR-TR08.5

• Designed to be used with Boardski 2.0 Brackets

• 3mm Aerospace Aluminum Side Plates

UV-resistant black anodized coating

• 20mm-3/4” tubes bolt together plates

• Link It Up rack (LR) is fastened to the snowmobile using four cargo base kits (two on each side of the rack) and allows other accessories to be used on the back of your snowmobile on longer snowmobile tunnel lengths.

LINK-IT-UP 2.0 XLR (X LARGE RACK)

CFR-TR08.75

Designed to be used with Boardski 2.0 Brackets

• 3mm Aerospace Aluminum Side Plates

• UV-resistant black anodized coating

• 20mm-3/4” tubes bolt together plates

Dimensions:

STEALTH SERIES RACKS

Newly designed Stealth Series racks are low profile, bomber, and designed to work with the factory holes in Ski-doo Gen 4 and Polaris Matryx tunnels as well as with the Polaris T-slot systems.

• Designed to be used with Boardski 2.0 Brackets

• 3mm Aerospace Aluminum Side Plates

• UV-resistant black anodized coating

SKI-DOO

RACK SIZE PART #

Small CFR-TR09

Large CFR-TR09.2 Extra Large CFR-TR09.4

POLARIS/ARCTIC CAT/YAMAHA

RACK SIZE PART #

Small CFR-TR09.1 Large CFR-TR09.3

Extra Large CFR-TR09.5

MOUNTAIN RACK NARROW

FLAT BLACK CFR-TR04.4

The CFR Mountain Rack-NRW is designed specifically for Polaris and ArcticCat snowmobiles. The 16” width and pre-drilled holes in the mounting plate fit the T-slots on the back of most Polaris snowmobiles.

All our bracket kits and both the dime an QP bag also fit inside this rack. Dropping the center of mass lowers all the weight that’s carried in the rack allowing the snowmobile to perform better under load.

• 16” Width

• 13 1/2” Length

• 3 3/4” High

CFR products that can be used with the LINK-IT UP racks.

QP Bag

• Dime Bag

• Boardski Bracket 2.0

• Link It Up Rack (XLR) is fastened to the snowmobile using Four Cargo base kits (Two on each side of the rack) allowing a lot of gear to be carried inside the rack but does not allow other accessories to be installed on the back of your snowmobile.

Works on both Polaris tunnels with channels and the new Matrix tunnel as well. When installed the plate allows the CFR Link It Up Racks to be installed on your Polaris snowmobile. The CFR Link It Up rack is removable on the fly. No tools required to take the rack on or off. Plates come in pairs. One plate for each side.

The CFR Mountain Rack’s design allows the rack to be mounted on the edge of the tunnel. This will allow OEM factory holes to be used requiring no drilling into the rear tunnel. The design is also engineered to use fewer materials than existing racks yet still be as strong.

Designed by CFR’s super team of snowmobilers, skiers, and snowboarders.

Total rack height is only 3 3/4” high.

• Carries up to a 20L or 6 gallon jerry can.

Carries up to two pairs of skies and or two snowboards with proper attachments.

All mounting hardware is made from high grade stainless steel.

• Compatible with CFR Dime and QP bags

MOUNTAIN RACK

FLAT BLACK CFR-TR04

Total rack height is only 3 3/4”

• Extremely strong and light weight 3/4” structural tubular aluminum.

Carries up to a 20L/6 gallon gas jerry can

• Compatible with CFR Dime and QP Bag

Carries up to two pairs of skis, snowboards or pow surfers with proper attachments

All mounting hardware is made from high grade stainless steel

53 MSD | DEALER CATALOGUE CFR
Designed by snowmobilers Dan Treadway, Rob Alford and Chris Brown POLARIS LINQ ADAPTER PLATE ADP100

Tunnel Racks Storage

IRACK 2.0

FLAT BLACK CFR-TR06

The low-profile lightweight design of the Mountain Rack for a lower center of gravity and 1 lbs weight savings. Can be installed using the LINK factory holes that come pre drilled on 2013 and newer Ski Doo snowmobiles.

• All snowboard and Ski brackets kits can be used

• Compatible with CFR Dime and QP Bag

• Extremely strong and lightweight 3/4” structural tubular aluminum

• Carries up to a 20L 6 G fuel container

• Carries up to 2 pairs of skis/snowboards with proper attachments (Sold Separately)

• Mounts to most snowmobiles with a 141” track or longer

• 1 LB Lighter and 3/4” lower than original iRack.

LINK-IT-UP RACK

FLAT BLACK CFR-TR07

The new CFR LINK-IT-UP® Rack is the latest evolution in our rack making technology. The LINK-IT-UP® Rack enables you to put on or take off your rack using the Ski-Doo LinQ removable brackets. All CFR bracket kits and bags work on the LINK-IT-UP® rack.

* Ski-Doo LinQ cargo base kit and Fastener Brackets sold separately.

EXPEDITION RACK

FLAT BLACK CFR-TR05

The Expedition Rack carries twice as much as all of our others racks. This rack is great for people wanting to carry lots of extra gear.

• Carries 2 X 20L gas cans

• Designed for sleds with 154” tracks or longer CFR Blades recomended

QP BAG CFR-B02

The QP Bag offers 25 liters of waterproof carrying capacity and fits snugly in all of the CFR rack systems. The QP is a telescoping bag that doubles in size with a quick zipper extension to carry up to 50 liters of gear.

• Waterproof zippers and Cordura waterproof fabric

• 25 liter capacity. Un-zip the extension and up to 50 liters of capacity are possible

• Clips right into all CFR rack systems and is easily removable

• Shovel holder on the top enables a shovel to be carried on the deep days for quick access

• Convenient carrying handle

• Individual inside pocket

DIME BAG

CFR-B01

The CFR Dime Bag has Velcro strips that wrap around the CFR DD, i and Mountain Racks’ tubular bars in four spots to keep the bag locked into place.

• 10 L of waterproof carrying capacity

3 layer laminate construction with waterproof zippers

• Built in Velcro straps secure the Dime Bag nice and tight

• Designed specifically to be used in CFR DD, and Mountain Racks

• Inside pocket for holding wallet and other valuables

• Attached key hook keeps keys in a safe place.

• CFR Snow/Ice scraper included

The new CFR RT bag was designed to be able to fit as much or as little as possible on the back of your snowmobile. The waterproof outer shell and waterproof zippers will keep whatever you have inside from getting wet.

The toll-top with compression straps keeps everything tight no matter how much or little you have inside to prevent your stuff from bouncing around. The RT bag comes with hooks that wrap around the bottom bars of your rack.

Easily removable the rack for taking bag with you.

• Waterproof material and zippers.

• Two access points to get inside bag.

• Top of bag has big pocket for easily accessed items.

54 WINTER 2024 CFR
DO I NEED?
WHAT BRACKETS
and Pow Surf
are ONLY
Series
and
BoardSki 2.0
2.0
compatible with Stealth
Racks
Link-it-up 2.0 Racks
Snowboard bracket, BoardSki bracket, and Pow Surf bracket are ONLY compatible with the iRack 2.0, Expedition Rack, Link-it-Up Rack, and Mountain Rack.
No rack required - all DTM brackets
RT BAG CFR-B05

Bracket Systems (Direct Tunnel Mount) Bracket Kits

SNOWBOARD BRACKET KIT

BLACK CFR-K01-B

• Carries 1 snowboard. Another Bracket Kit can be purchased to carry 2 snowboards

• Designed to work with the irack 1.0 and 2.0, Mountain Rack, Expedition rack, and Link-it-up rack 1.0

CFR BRACKET SYSTEMS AND BRACKET KITS

Ratchets and ladders are custom made for superior ratcheting

• Nylon brackets are lightweight, strong and capable of temperatures down to -100 degrees

• Injection molded straps can withstand -100 degree temperatures, but will break in a severe rollover in order to prevent damage to your equipment

• Bracket Kits are specifically made to fit CFR Racks

• All mounting hardware is included and is made from high-grade stainless steel that won’t rust

BOARDSKI BRACKET KIT

BLACK CFR-K04-B

• Carries one pair of skis/poles or one snowboard

• Another DualSki Bracket Kit, BoardSki Bracket Kit, PowSurf Bracket Kit or Snowboard Bracket Kit can be used on other side of rack

• Designed to work with the irack 1.0 and 2.0, Mountain Rack, Expedition rack, and Link-it-up rack 1.0

BOARDSKI BRACKET 2.0

BLACK CFR-K06

Change last sentence to the Boardski 2.0 bracket is designed to work with the Link-it-up 2.0 rack and Stealth series rack.

METAL SNOWBOARD BRACKET SYSTEM (DTM)

BLACK CFR-M01-B

• Metal Snowboard Rack System carries 1 snowboard on the side of most snowmobiles

Another snowboard can be carried by purchasing another Metal Snowboard Rack System

BOARDSKI BRACKET SYSTEM (DTM)

BLACK CFR-M03-B

• The CFR DTM Boardski bracket bolts to the side of most snowmobiles (Does not work on 07 and newer Polaris snowmobiles) or Ski-Doo Summit ‘04-’07

• Carries either a pair of skis and poles or a snowboard

• Another DTM Boardski Bracket System can be purchased to carry up to two skis and or snowboards

POW SURF BRACKET KIT

BLACK CFR-K05-B

• Carries one snowboard or Pow Surf Board

• Professionally used and approved by Grassroots Founder Jeremy Jensen

POW SURF BRACKET 2.0 K07

The Pow Surf Bracket 2.0 bracket is designed to work with the Link-it-up 2.0 rack and Stealth series rack. The POW Surf Bracket 2.0 can carry a POW surfer or a snowboard in the side of one of our updated styles of racks.

55 MSD | DEALER CATALOGUE CFR
FRONT REAR
802 9 ST N, GOLDEN, BC V0A 1H2 PLACE YOUR ORDER: ONLINE: MOUNTAINSPORTSDISTRIBUTION.COM BY E-MAIL: ORDERS@MOUNTAINSPORTSDISTRIBUTION.COM BY PHONE: 1.888.987.7533 (SLED) Printed in Canada

Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.