ReplacementStep-by-StepWindowinFlorida https://misterwindow.com/
https://misterwindow.com/
You should also measure the height of the window which is the space from the top of the window sill to the bottom of the jam and should be measured at the left, middle and right of the window.
STEP 1: MEASURE FOR ACCURACY
The first step to window replacement is to get accurate measurements of the window space. You'll measure the width first which is the space from the inside of one side of the jam to the other. Ideally, you should measure the width at the bottom, middle and top of the window.
Once you have measurements,accurateyoucan purchase the window(s) of your choice. Before you begin installing your new window(s), the next step is to remove all the window sashes so your replacement window(s) will fit inside your existing frame https://misterwindow.com/
https://misterwindow.com/
Caulk the tops of the window jams on the inside and outside, install the sill angle and then caulk the top of the header, or expander, after you put it on the top of the window.
STEP 2: CAULKING
STEP 3: WINDOW PLACEMENT https://misterwindow.com/
Then, you can seal any gaps by sliding the header up.
Next, you will put your new window in the appropriate place and make sure that it lays square and that screws are installed at the top and bottom of the side jams and aren't too tight.
STEP 4: FINAL CAULKING Lastly, you should do a final caulking inside the window. There are many variations to replacement window installations in Florida, and this is as basic as it gets; so, just be sure that if you are replacing your windows, you have accurate measurements, all the necessary supplies for a successful installation and, if necessary, a handyman or window installation expert ready to assist. https://misterwindow.com/
Contact Us! https://misterwindow.com/9412160476 1610 12th Street East Palmetto, Florida https://www.facebook.com/WindowMister/34221https://twitter.com/WindowMister