Page 1

Efficiency at its best with Cool Insulation

Machines-

insulationmachines.net A properly designed, insulated, and maintained system significantly reduces energy costs, which saves money and protects the environment. An unbelievable amount of energy is lost through uninsulated valves, bare pipes, or defective insulation. It seems to be one of those maintenance things that never get done—until somebody can demonstrate what it's costing to ignore the uninsulated system. Adding insulation to your loft or attic is one of the easiest and cheapest ways of improving a building’s energy efficiency. Nowadays, you can insulate your property with practically anything from recycled newspaper, to soy-based foam solutions, in order to keep temperatures consistent all year round. There are many materials that can be used to do this like fiber glass, mineral wool, vermiculite, spray foam, etc. Cool insulation blowing machines, or blow in insulation, products like cool insulation Machines bring improved performance per square inch and the least amount of settling over time to the insulation market. Blown-in insulation refers to blowing or spraying insulation product into wall cavities, attics, and floors. Methods vary depending on the form of insulation selected. Loose-Fill Fiberglass In its loose-fill form, fiberglass is made from glass that is blown or spun into fibers. It is installed using a blowing machine. Loose-fill fiberglass is suitable for attics and wall cavities and can combat common insulation enemies like mildew, fungus, and moisture. Cellulose Blown insulation machine has been around since the 1920’s and consists predominantly of recovered or recycled newsprint and/or corrugated cardboard, treated with a fire retardant. Three main types of blow-in cellulose insulation are used in residential application: loose fill, stabilized, and wall-cavity spray. Spray-in Foam Spray-in or spray-on polyurethane foam expands to fill cracks and voids to form a tightly sealed barrier. Foam’s biggest advantage is it virtually eliminates air infiltration. In most cases the foam is mixed on site, where trained professionals do the installation. But removal of insulation at the right time is essential. Even though, insulation is supposed to last a long time when properly installed and when it doesn't encounter anything strange or destructive. The chances of the insulation eventually encountering a nemesis are pretty good if you wait long enough. From age to insects, insulation can sustain damage that is hard for you to see until you discover clues that something has gone wrong in the home.


A cool insulation blowing machine will break up insulation materials which are bundled up and capture the insulation which is inside a sealed chamber situated at the bottom of the hopper of the machine. Air pressure which is created by a blower or compressor blows the insulation out from the chamber and then through the hose. Blowing fiberglass often poses a challenge to smaller electric machines and the job can be relatively slow if the machine that you use is not appropriately designed for fiberglass or if it has been poorly repaired. But the cool insulation blower is one of the best insulation blowers in the market and works efficiently in all conditions.

Efficiency at its best with Cool Insulation Machines insulationmachines.net  

The Cool insulation blowing machine is equipped with the finest insulation equipment to give you finest quality of blow in fiberglass insula...

Efficiency at its best with Cool Insulation Machines insulationmachines.net  

The Cool insulation blowing machine is equipped with the finest insulation equipment to give you finest quality of blow in fiberglass insula...

Advertisement