HP Envy 5055 First-Time Installation Guidance | 123.hp.com/envy5055

HP Envy 5055 First-Time Installation

HP Envy 5055 Printer Are you looking for a 123.hp.com/envy5055 printer that performs all the tasks with great ease? Perform multitasks such as Print, Scan and Copy with your printer.

Quick Steps for First-Time Installation • Carefully Take-Out the 123.hp.com/envy5055 Printer from the box.

• Remove the Plastic Covers in which the printer would be packed by the HP dealers.

• Now, you would find a Power Cord wrapped in its covers. Make sure that you take out the power cord and place it cautiously on a nearby table.

• Also, Remove the CD that is packed safely inside the package.

• Look for ink cartridges of the printer inside the package.

Carefully take out the set of ink cartridges from the box.

• Once you set the ink cartridge on a table, mildly grasp the handle and raise the ink cartridge access door until it locks into place. Then remove all tape and packing material from inside the printer.

• Look out for more tapes and packaging materials on the printer.

Make sure that you remove every inch of tape and adhering materials from the printer before you continue.

• Close the ink cartridge access door.

• Carefully close the paper input tray.

• Now it’s time to plug the power cord that was already placed outside earlier. Plug the other end of the power cord into an electrical outlet.

• Power ON the printer.

• Ensure to set the preferences on the printer Control Panel.

• If prompted on the printer screen, “Select” the date and time, and then Touch “Yes” to confirm your choice.

• To install the ink cartridges, raise the ink cartridge access door until it locks into place.

• Wait until the carriage is idle and the noise is not heard any more from the carriage.

• If you have one or two ink cartridges, be sure that you remove one of the ink cartridges from its package. And ensure that you only touch on the black cover of the ink cartridge.

• If there are plastic tapes, remove them from the cartridge.

• Lift up the lid on the ink cartridge slot and insert the ink cartridge into its slot.

• Close the lid on the ink cartridge slot carefully to secure the ink cartridge into place.

• Repeat these steps for the other ink cartridge.

• Hold the input tray with proper care and open them, slide out the paper guides as far as possible.

• Load paper in portrait orientation with the print side facing down.

• Align the ink cartridges properly to achieve the best quality prints.

• Close the scanner lid, and then touch OK on the printer control panel.

• For More HP Envy 5055 Printer Guidelines Visit Here:

“https://123hpcom.co/envy-5055/”

Thank You!!!