2011 Industrial Brochure by Mi-T-M MStudios

2011 INDUSTRIAL EQUIPMENT

The Mi-T-M Story

1971-2011

In 1971 AJ Spiegel worked 120-hours per work week and traveled more than 100,000 miles in a year. His intent was to promote his new pressure washer with unabashed enthusiasm, participating in trade shows and exhibitions throughout the country. “It was important to me to personally present my product – no matter where I had to go to do it,” he exclaimed. Raised on a farm near Peosta, Iowa just down the road from today’s modern 850,000 square foot campus that is home to the Mi-T-M Corporation, Spiegel was never a stranger to hard work. “We knew what work was seven days a week,” he said. “We knew we had to be there 14 times a week to milk the cows. From an early age work ethic was very prominent in my life.” During his days as a painting contractor Spiegel sold truck-mounted 10,000 PSI water blasters. These units inspired him to develop something more portable and practical for contractors. His very first pressure washer, the Mighty-1000 was the culmination of Spiegel’s ideas on what the industry needed - a compact, portable, 1000 PSI pressure washer. It was the first self-contained, gas-powered pressure washer on the market.

Mighty-1000

Spiegel came up with the name for his company, Mi-T-M, as a response to the “mini-craze” of the 1970s. “Everything was mini,” he said. “That image was the opposite of what I wanted for my company. My company was destined to be ‘Mighty’.” So Spiegel used that description and the Roman numeral “M” for 1000 PSI, the power of his very first pressure washer model, for the Mi-T-M name. In 1972 Spiegel was building and selling his first model to local farmers and paint contractors, but it was the success at trade shows that really spiked sales. “It was a hit. We had all sorts of requests for that machine.” he said, so in 1973 Spiegel began to focus solely on his growing pressure washer manufacturing company. In 1978 the company had eight employees and in 1982 that number doubled. Two years later it doubled again. Today, Mi-T-M employs well over 300 talented and dedicated people. Like the growth of the organization Mi-T-M’s product line also expanded. Mi-T-M now manufactures over 130 different models of pressure washers from gasoline and diesel powered to electric; from belt drive to direct drive; and from cold water to hot water. In 1998 water reclaim systems were added to the product mix, followed by air compressors and industrial wet and dry vacuums in 1999. Always looking to diversify, in the last decade Mi-T-M began manufacturing industrial generators, the multipurpose air compressor/ generator combination, jobsite boxes and most recently portable heaters. When Spiegel was a professional painting contractor, he experienced poor customer service. “I now understand the value of good quality service. The most important thing is service; everything else is secondary.” From the day that very first pressure washer was built in 1971, AJ Spiegel worked hard to maintain a reputation for manufacturing high quality products and stands behind them like no one else in the industry. That same philosophy is what drives Mi-T-M today.

Mi-T-M Corporation

800-553-9053

www.mitm.com

A Note From AJ Spiegel It’s hard to imagine the little company that first introduced the Mighty-1000 PSI pressure washer is celebrating its 40th year in business. If there is one thing I’ve learned after 40 years of manufacturing quality equipment, it is to live up to and surpass your customer’s expectations. This is the goal I set for myself 40 years ago and it is our goal at Mi-T-M today. Change is constant. In 1971 the Mi-T-M Corporation had one employee, today we have well over 300 people who work for you, our customer. We’ve made many changes over the years and most can be attributed to satisfying the needs of our customers. Manufacturing processes have been revolutionized. Efficiency is more vital today than ever. Not only have we been willing to change, it is what has sustained us over the years. One thing that will not change is that you can expect nothing less than 100% dedicated customer service from us, including speaking with a person and not a machine when you contact Mi-T-M. We know that our success is dependent on your success and we will never let you down. I’d like to share a story about a customer who purchased a pressure washer from us over 20 years ago. The pressure washer is still running today and because of that we know we have a loyal customer for life. Whether we sell one machine to this customer or 100, we build them to last. That is our success story and I am proud to be part of it.

"This is the goal I set for myself 40 years ago and it is our goal at Mi-T-M today."

It is because of your support and dedication that Mi-T-M is the company it is today and I thank you for that. I can’t wait to see what the future will bring for the little company with the Mighty-1000.

on ial ab out my 24 05 se nd yo u a tes tim "I th oug ht I wo uld 20 ye ar s ag o in I pu rc ha se d ab out ich wh er sh wa pr es su re it in Ca lif or nia an d me rc ial pu rp ose s com r fo it t gh bou 199 0. I ed nc e th en , it is us ab out 10 ye ar s. Si r fo ily da e us wa s in ha s wo rk ed d th e ho us e an d it oun ar ek we a es tim se ve ra l re qu ire d ha s be en en an ce th at it ha s int ma ly on e Th th e be st pe rf ect ly. wa nd . It ha s be en lve , ne w ho se an d a ne w po p- of f va be t th at th e da y a too l an d yo u ca n on t en sp er ev ve mo ne y I ha to bu y an oth er on e I wi ll be goi ng out s, re pi ex lly na fi th at it ev en me ! ll pr oba bly out las t at th is ra te, it wi t bu y, da ry ve th at of th e wa sh er ." He re is a pi ctu re pr od uc t! Th an ks fo r a gr eat Bo b Ev an s Ce da r Ci ty , UT

www.mitm.com

800-553-9053

Mi-T-M Corporation

Product Index Pressure Washers

Air Compressors

Air Compressor/Generators

Portable Generators

Wet/Dry Vacuums

Jobsite Boxes

Portable Heaters

Safety Certifications

Ordering & Warranty Information

The Machine That Started It All

1981

1971 1983

1978 4

Mi-T-M Corporation

800-553-9053

www.mitm.com

1984

History of...

Cold and Hot Water Pressure Washers

The machine that started it all. In 1971 AJ Spiegel built a compact, portable, 1000 PSI cold water pressure washer, the first self-contained, gas-powered pressure washer on the market. It was known as the "Mighty-1000." Within a few years, models with a higher PSI and greater cleaning power were introduced by Mi-T-M. The 1604 PSI model was built for the "weekender" for jobs around the house, a 2400 PSI model for fast paint removal and a 3500 PSI model to remove mud and grease build-up.

1990

In the 1980s the "industrial-grade" CW Series pressure washers with 1500 to 4000 PSI of power were introduced along with the Mi-T-Hot Series, the first hot water pressure washers manufactured by Mi-T-M. Advanced technology of the late 1990s brought many changes to the pressure industry. Mi-T-M focused on pressure washers to suit professionals who demanded top performance and extended run times. Mi-T-M hot water pressure washers featured whole system diagnostic boards, patented EMF ignition systems and top fired combustion chambers. Today, Mi-T-M manufactures pressure washers in an 850,000 square foot state-of-the-art facility located in Peosta, Iowa. For 2011 the Mi-T-M pressure washer product line includes over 130 models from hand carry and portable to stationary, direct drive and belt drive, electric, gasoline, diesel and natural gas.

1992

1997

2011

2005 www.mitm.com

800-553-9053

Mi-T-M Corporation

P R E S S U R E

W A S H E R S

Cold Water Gasoline Direct Drive CD Series

Designed for all-purpose cleaning, the lightweight CD Series pressure washers are ideal for homeowners and small industrial jobs.

Direct drive triplex piston General pump with ceramic plungers

CD-2003-0MHH

Pump - Stainless-steel and brass unloader with adjustable pressure valve and forged brass manifold - Thermal and safety relief valves - In-line water strainer - Adjustable low pressure detergent injection Engine - Performance-proven Honda OHV engine with low-oil protection Frame - Powder coated steel mounting plate with center balanced lift and four rubber isolators

Model Number CD-2003-0MHH

PSI GPM Displacement/Engine 2000 2.7 196cc Honda OHV

Unit Includes - Quick connect nozzles (0°, 15°, 25° and detergent nozzle) - 50-foot x 3⁄8-inch non-marking hose with quick connects, swivel and bend restrictors - Professional-grade insulated trigger gun with safety lock-off - 36-inch two-piece insulated lance Warranties

3 7 YEAR LIMITED

HONDA ENGINE WA R R A N T Y

YEAR LIMITED

PUMP WA R R A N T Y

Dimensions (LxWxH) Ship Wt. 18in.x14.5in.x18in. 75 lbs.

Net Wt. 56 lbs.

ACCESSORIES Part Number Description 50-0161 High pressure detergent injection - High pressure water mixes with detergent to clean even the heaviest build-up

Mi-T-M Corporation

800-553-9053

www.mitm.com

Fits Models CD-2003-0MHH

P R E S S U R E

W A S H E R S

Cold Water Gasoline Direct Drive JP Series

The JP Series features a 1-inch steel extended handle design for excellent balance and mobility. Equipped with either a powerful Honda engine or performance proven Subaru engine this model has great cleaning power.

Pump - Direct drive triplex piston AR pump with ceramic plungers - Stainless-steel and brass unloader with adjustable pressure - Forged brass manifold - Thermal relief valve - In-line water strainer Engine - Performance-proven engine with low-oil protection Frame - 1-inch powder coated steel tube handles for easier pulling - Powder coated and welded steel base plate - Convenient gun/wand holder and hose wrap - Solid steel axle (threaded on 3500 & 4000-PSI models) - Pneumatic tires with tubes for longer life - Dual rubber isolators Model Number JP-2403-0MHB JP-2403-0MRB JP-2703-0MHB JP-2703-0MRB JP-3003-0MHB JP-3003-0MRB JP-3504-0MHB JP-3504-0MRB JP-4004-1MHB JP-4004-1MRB

PSI 2400 2400 2700 2700 3000 3000 3500 3500 4000 4000

GPM 2.4 2.4 2.4 2.4 3.0 3.0 3.5 3.5 3.5 3.5

Displacement/Engine 196cc Honda OHV 211cc Subaru OHC 196cc Honda OHV 211cc Subaru OHC 270cc Honda OHV 265cc Subaru OHC 389cc Honda OHV 404cc Subaru OHC 389cc Honda OHV 404cc Subaru OHC

JP-3003-0MRB

Unit Includes - Quick connect nozzles (0°, 15° and 25°) - 50-foot x 3⁄8-inch non-marking hose with quick connects, swivel and bend restrictors - Professional-grade insulated trigger gun with safety lock-off - 36-inch lance with rubber grip (48-inch lance on 3500 & 4000-PSI models) Warranties

3 3 7 YEAR LIMITED

HONDA ENGINE WA R R A N T Y

YEAR LIMITED

SUBARU ENGINE WA R R A N T Y

Dimensions (LxWxH) 37in.x21in.x24.5in. 37in.x21in.x24.5in. 37in.x21in.x24.5in. 37in.x21in.x24.5in. 40in.x22.5in.x24.5in. 40in.x22.5in.x24.5in. 40in.x22.5in.x24.5in. 40in.x22.5in.x24.5in. 40in.x22.5in.x24.5in. 40in.x22.5in.x24.5in.

PUMP WA R R A N T Y

Ship Wt. 100 lbs. 100 lbs. 110 lbs. 110 lbs. 180 lbs. 180 lbs. 192 lbs. 192 lbs. 192 lbs. 192 lbs.

Net Wt. 75 lbs. 75 lbs. 85 lbs. 85 lbs. 130 lbs. 130 lbs. 142 lbs. 142 lbs. 142 lbs. 142 lbs.

ACCESSORIES & OPTIONS Part Number Description 50-0161 High pressure detergent injection - High pressure water mixes with detergent to clean even the heaviest build-up AW-8400-0021 Low pressure detergent injection - Allows the user to apply the recommended detergents CX-0005 Insulated dual lance - Has both a high and low pressure tip that allows you to switch to the low pressure chemical injector without having to change tips CX-0083 External bypass - Allows more water into the system to protect from heat build-up CX-0084 External bypass - Allows more water into the system to protect from heat build-up TX-1002-W Puncture-proof tires - Tires are flat-free and maintenance-free, 10-inch, white hub, two tires

www.mitm.com

800-553-9053

Fits Models All models All models All models 2400 to 2700-PSI models 3000 to 4000-PSI models All models

Mi-T-M Corporation

P R E S S U R E

W A S H E R S

Cold Water Gasoline Direct Drive

CA Aluminum Series

Pump - Direct drive triplex piston AR or General pump CA-3003-0MRB with ceramic plungers - General pumps feature external bypass system which allows more water into the system to protect from heat build-up - Stainless-steel and brass unloader with adjustable pressure - Forged brass manifold - Thermal relief valve - In-line water strainer Engine - Performance-proven engine with low-oil protection Frame - Light, corrosion resistant aluminum frame - 1-inch aluminum handles for easier pulling - Aluminum base plate and solid full-length axle - Convenient nozzle holder for quick connect nozzles - Pneumatic tires with tubes for longer life - Dual rubber isolators Model Number CA-2403-0MHB CA-2403-0MRB CA-2703-0MHB CA-2703-0MRB CA-3003-0MHB CA-3003-0MRB CA-3504-0MHB CA-3504-0MRB CA-3504-1MHB* CA-4004-0MHB CA-4004-0MRB CA-4004-1MHB*

PSI 2400 2400 2700 2700 3000 3000 3500 3500 3500 4000 4000 4000

GPM 2.4 2.4 2.4 2.4 3.0 3.0 3.5 3.5 4.0 3.5 3.5 4.0

Displacement/Engine 196cc Honda OHV 211cc Subaru OHC 196cc Honda OHV 211cc Subaru OHC 270cc Honda OHV 265cc Subaru OHC 389cc Honda OHV 404cc Subaru OHC 389cc Honda OHV 389cc Honda OHV 404cc Subaru OHC 389cc Honda OHV

Fitted with our patented vibration isolation plate the CA Series aluminum pressure washer is lightweight yet rugged. Designed for easy mobility, this high-performance model travels easily from jobsite to jobsite.

Patented vibration isolation plate with four rubber isolators for reduced movement Unit Includes - Quick connect nozzles (0°, 15° and 25°) - 50-foot x 3⁄8-inch non-marking hose with quick connects, swivel and bend restrictors - Professional-grade insulated trigger gun with safety lock-off - 36-inch lance with rubber grip (48-inch lance on 3500 & 4000-PSI models) Warranties

3 3 7 YEAR LIMITED

HONDA ENGINE WA R R A N T Y

YEAR LIMITED

SUBARU ENGINE WA R R A N T Y

Dimensions (LxWxH) 39in.x20.5in.x24.5in. 39in.x20.5in.x24.5in. 39in.x20.5in.x24.5in. 39in.x20.5in.x24.5in. 42.5in.x23.5in.x24.5in. 42.5in.x23.5in.x24.5in. 42.5in.x23.5in.x24.5in. 42.5in.x23.5in.x24.5in. 42.5in.x23.5in.x24.5in. 42.5in.x23.5in.x24.5in. 42.5in.x23.5in.x24.5in. 42.5in.x23.5in.x24.5in.

Ship Wt. 100 lbs. 100 lbs. 100 lbs. 100 lbs. 155 lbs. 155 lbs. 175 lbs. 175 lbs. 175 lbs. 175 lbs. 175 lbs. 175 lbs.

YEAR LIMITED

PUMP WA R R A N T Y

Net Wt. 73 lbs. 73 lbs. 73 lbs. 73 lbs. 105 lbs. 105 lbs. 125 lbs. 125 lbs. 125 lbs. 125 lbs. 125 lbs. 125 lbs.

*Model comes standard with external bypass system and General pump.

Mi-T-M Corporation

800-553-9053

www.mitm.com

Fits Models All models All models All models 2400 to 2700-PSI models 3000 to 4000-PSI models All models

P R E S S U R E

W A S H E R S

Cold Water Gasoline Belt Drive CBA Aluminum Series

The popular CBA Series of pressure washers features a lightweight aluminum frame, base plate and belt guard making it one of the most lightweight, yet industrial-quality models in the industry. The patented vibration isolation plate is designed to absorb vibration and noise and will reduce movement of the unit while it is running. General pumps feature an external bypass system which allows more water into the system to protect from heat build-up

Patented vibration isolation plate with four rubber isolators for reduced movement

CBA-3504-1MHB Pump - Belt drive triplex piston AR or General pump with ceramic plungers - Stainless-steel and brass unloader with adjustable pressure - Forged brass manifold - Thermal relief valve - Water filter with clear sleeve for screen inspection Engine - Performance-proven engine with low-oil protection Frame - Light, corrosion resistant aluminum frame - 1-inch aluminum tube handles for easier pulling - Aluminum base plate - Two-piece belt guard for quick access to belts - Solid 7⁄8-inch diameter full-length threaded axle - Pneumatic tires with tubes for longer life - Dual rubber isolators Model Number CBA-3504-0MHB CBA-3504-0MRB CBA-3504-1MHB* CBA-4004-0MHB CBA-4004-0MRB CBA-4004-1MHB*

PSI 3500 3500 3500 4000 4000 4000

GPM 3.7 3.7 4.0 3.4 3.4 3.5

Displacement/Engine 389cc Honda OHV 404cc Subaru OHC 389cc Honda OHV 389cc Honda OHV 404cc Subaru OHC 389cc Honda OHV

Component - Dual cogged belt drive system for increased belt life Unit Includes - Quick connect nozzles (0°, 15°, 25° and 40°) - 50-foot x 3⁄8-inch non-marking hose with quick connects, swivel and bend restrictors - Professional-grade insulated trigger gun with safety lock-off - 48-inch lance with rubber grip Warranties

3 3 7 YEAR LIMITED

HONDA ENGINE WA R R A N T Y

Dimensions (LxWxH) 47in.x27.5in.x28.5in. 47in.x27.5in.x28.5in. 47in.x27.5in.x28.5in. 47in.x27.5in.x28.5in. 47in.x27.5in.x28.5in. 47in.x27.5in.x28.5in.

YEAR LIMITED

SUBARU ENGINE WA R R A N T Y

Ship Wt. 215 lbs. 215 lbs. 215 lbs. 215 lbs. 215 lbs. 215 lbs.

YEAR LIMITED

PUMP WA R R A N T Y

Net Wt. 165 lbs. 165 lbs. 165 lbs. 165 lbs. 165 lbs. 165 lbs.

*Model comes standard with external bypass system and General pump.

ACCESSORIES & OPTIONS Part Number Description 50-0161 High pressure detergent injection - High pressure water mixes with detergent to clean even the heaviest build-up AW-8400-0021 Low pressure detergent injection - Allows the user to apply the recommended detergents CX-0005 Insulated dual lance - Has both a high and low pressure tip that allows you to switch to the low pressure chemical injector without having to change tips CX-0082 External bypass system - Allows more water into the system to protect from heat build-up; attaches to the pump TX-1302-W Puncture-proof tires - Tires are flat-free and maintenance-free, 13-inch, white hub, two tires

www.mitm.com

800-553-9053

Fits Models All models All models All models All models except 1MHBs All models

Mi-T-M Corporation

P R E S S U R E

W A S H E R S

Cold Water Gasoline Belt Drive JCW Series

Don’t let the compact design of the JCW Series pressure washers fool you. This rugged belt-driven unit is built with an all-steel frame and base plate and can handle even the toughest environments. The JCW Series delivers cleaning of up to 4000-PSI and every model features an AR pump with a limited 7 year warranty.

JCW-3504-0MHB Pump - Belt drive triplex piston AR pump with ceramic plungers - Stainless-steel and brass unloader with adjustable pressure - Forged brass manifold - Thermal relief valve - Water filter with clear sleeve for screen inspection Engine - Performance-proven engine with low-oil protection Frame - 11⁄4-inch powder coated steel tube handles (1-inch on 2400 to 2700-PSI models) - Powder coated steel base plate with welded reinforcement for reduced vibration - Two-piece belt guard with 1⁄4-turn release for quick access to belts - Convenient gun/wand holder and hose wrap - Solid steel threaded axle - Pneumatic tires with tubes for longer life - Dual rubber isolators Model Number JCW-2403-0MHB JCW-2403-0MRB JCW-2703-0MHB JCW-2703-0MRB JCW-3504-0MHB JCW-3504-0MRB JCW-4004-1MHB JCW-4004-1MRB

PSI 2400 2400 2700 2700 3500 3500 4000 4000

GPM 2.8 2.8 2.4 2.4 3.7 3.7 3.4 3.4

Displacement/Engine 196cc Honda OHV 211cc Subaru OHC 196cc Honda OHV 211cc Subaru OHC 389cc Honda OHV 404cc Subaru OHC 389cc Honda OHV 404cc Subaru OHC

3 3 7 YEAR LIMITED

HONDA ENGINE WA R R A N T Y

Dimensions (LxWxH) 37.5in.x22in.x25in. 37.5in.x22in.x25in. 37.5in.x22in.x25in. 37.5in.x22in.x25in. 39.5in.x28.5in.x26in. 39.5in.x28.5in.x26in. 39.5in.x28.5in.x26in. 39.5in.x28.5in.x26in.

YEAR LIMITED

SUBARU ENGINE WA R R A N T Y

Ship Wt. 171 lbs. 171 lbs. 171 lbs. 171 lbs. 245 lbs. 245 lbs. 249 lbs. 249 lbs.

YEAR LIMITED

PUMP WA R R A N T Y

Net Wt. 121 lbs. 121 lbs. 121 lbs. 121 lbs. 191 lbs. 191 lbs. 195 lbs. 195 lbs.

ACCESSORIES & OPTIONS Part Number Description 50-0161 High pressure detergent injection - High pressure water mixes with detergent to clean even the heaviest build-up AW-8400-0021 Low pressure detergent injection - Allows the user to apply the recommended detergents CX-0005 Insulated dual lance - Has both a high and low pressure tip that allows you to switch to the low pressure chemical injector without having to change tips CX-0082 External bypass system - Allows more water into the system to protect from heat build-up; attaches to the pump CX-0085 External bypass system - Allows more water into the system to protect from heat build-up; attaches to the base plate TX-1002-W Puncture-proof tires - Tires are flat-free and maintenance-free, 10-inch, white hub, two tires TX-1302-W Puncture-proof tires - Tires are flat-free and maintenance-free, 13-inch, white hub, two tires

Mi-T-M Corporation

800-553-9053

www.mitm.com

Fits Models All models All models All models All models All models 2400 to 2700-PSI models 3500 to 4000-PSI models

P R E S S U R E

W A S H E R S

Cold Water Gasoline Belt Drive Built for industrial cleaning jobs, the CW Premium Series is deemed the workhorse of the Mi-T-M industrial cold water pressure washer line. With its heavy-duty belt drive system, this gas-driven unit can withstand whatever you throw at it and is offered in a wide selection of cleaning power from 2500-PSI to 4000-PSI.

CW Premium Series

External bypass system allows more water into the system to protect from heat build-up

CW-4004-4MGR Pump - Belt drive triplex piston General pump with ceramic plungers - Stainless-steel and brass unloader with adjustable pressure - Forged brass manifold (Nickel plated brass on CW-4004-3MV0) - Thermal relief valve - Water filter with clear sleeve for screen inspection Engine - Performance-proven engine with low-oil protection Frame - 11⁄4-inch powder coated steel tube handles - Powder coated 1⁄4-inch steel base plate - Two-piece belt guard with 1⁄4-turn release for quick access to belts - Convenient gun/wand holder and hose wrap - Solid steel threaded axle - Pneumatic mag tires with tubes for longer life - Dual rubber isolators Model Number CW-2505-4MGH CW-3004-4MGH CW-3504-4MGH CW-3504-4MGR CW-4004-4MGH CW-4004-4MGR CW-4004-3MV0*

PSI 2500 3000 3500 3500 4000 4000 4000

GPM 4.4 3.5 3.7 3.7 3.5 3.5 4.0

Displacement/Engine 389cc Honda OHV 389cc Honda OHV 389cc Honda OHV 404cc Subaru OHC 389cc Honda OHV 404cc Subaru OHC 480cc Vanguard OHV

Component - Heavy-duty dual cogged belt drive system for increased belt life Unit Includes - Quick connect nozzles (0°, 15°, 25° and 40°) - 50-foot x 3⁄8-inch non-marking hose with quick connects, swivel and bend restrictors - Professional-grade insulated trigger gun with safety lock-off - 36-inch lance with rubber grip (48-inch on 3500 & 4000-PSI models) Warranties

2 3 3 10 YEAR LIMITED

YEAR LIMITED

VA N G U A R D E N G I N E H O N D A E N G I N E WA R R A N T Y WA R R A N T Y

Dimensions (LxWxH) 45.5in.x28in.x26in. 45.5in.x28in.x26in. 46in.x28in.x30in. 46in.x28in.x30in. 46in.x28in.x30in. 46in.x28in.x30in. 46in.x28in.x30in.

Ship Wt. 290 lbs. 290 lbs. 290 lbs. 290 lbs. 290 lbs. 290 lbs. 330 lbs.

YEAR LIMITED

SUBARU ENGINE WA R R A N T Y

YEAR LIMITED

PUMP WA R R A N T Y

Net Wt. 216 lbs. 216 lbs. 216 lbs. 216 lbs. 216 lbs. 216 lbs. 256 lbs.

*Electric start (battery included).

ACCESSORIES & OPTIONS Part Number Description 50-0161 High pressure detergent injection - High pressure water mixes with detergent to clean even the heaviest build-up AW-8400-0021 Low pressure detergent injection - Allows the user to apply the recommended detergents CX-0005 Insulated dual lance - Has both a high and low pressure tip that allows you to switch to the low pressure chemical injector without having to change tips CX-0045 Electric start (battery included) - For easy starting CX-0054 Roll cage - Designed for cold water pressure washers to protect equipment, comes with a lifting hook, 11⁄4-inch powder coated steel tubing CX-0055 Roll cage - See CX-0054 for option description TX-1302-M Puncture-proof tires - Tires are flat-free and maintenance-free, 13-inch, white hub, two tires

www.mitm.com

800-553-9053

Fits Models All models All models All models All Honda models All Honda and Subaru models CW-4004-3MV0 All models

Mi-T-M Corporation

P R E S S U R E

W A S H E R S

Cold Water Gasoline Belt Drive CWC Premium Series

The Mi-T-M CWC Series pressure washers are built for continuous heavy-duty cleaning with an 8-hour run time and up to 6000-PSI. One of the most powerful cold water pressure washers on the market today, this unit is jobsite-site ready with 11⁄4-inch roll cage, handles and lifting hook.

CWC-5004-3MAH CWC-5004-3MGH CWC-5005-3MGH

11.5-gallon capacity fuel tank allows for 8-hour running time

Pump - Belt drive triplex piston AR or General pump with ceramic plungers - Preset stainless-steel and brass unloader - Forged brass manifold - Thermal and safety relief valves - Water filter with clear sleeve for screen inspection (High capacity water filter on 3000-PSI model) - Pump oil drain Engine - Performance-proven engine with low-oil protection - Electric start (battery included) - Engine oil drain Frame - Patented frame design includes powder coated steel frame with 11⁄4-inch roll cage, handles and lifting hook - Two-piece belt guard with 1⁄4-turn release for quick access to belts - Convenient gun/wand holder and hose wrap - Solid steel threaded axles - Pneumatic mag tires with tubes with locking tire brake Model Number CWC-3008-3MGH CWC-5004-3MAH* CWC-5004-3MGH CWC-5005-3MGH CWC-6004-3MGH

PSI 3000 5000 5000 5000 6000

GPM 8.0 4.0 4.0 5.0 3.7

Displacement/Engine 688cc Honda OHV 688cc Honda OHV 688cc Honda OHV 688cc Honda OHV 688cc Honda OHV

CWC-5004-3MAH

Components - Heavy-duty dual cogged belt drive system for increased belt life - Easy start valve - Polyethylene fuel tank will not rust Unit Includes - Quick connect nozzles (0°, 15°, 25° and 40°) - 50-foot x 3⁄8-inch non-marking hose with quick connects, swivel and bend restrictors (1⁄2-inch on 3000-PSI model) - Professional-grade insulated trigger gun with safety lock-off - 48-inch lance with rubber grip Warranties

3 7 YEAR LIMITED

HONDA ENGINE WA R R A N T Y

Dimensions (LxWxH) 43in.x27.75in.x36in. 43in.x27.75in.x36in. 43in.x27.75in.x36in. 43in.x27.75in.x36in. 43in.x27.75in.x36in.

YEAR LIMITED

PUMP WA R R A N T Y

Ship Wt. 511 lbs. 501 lbs. 501 lbs. 511 lbs. 511 lbs.

Net Wt. 388 lbs. 378 lbs. 378 lbs. 388 lbs. 388 lbs.

*Model equipped with AR pump, all other models equipped with General pumps.

OPTION Part Number TX-1304-M

Description Puncture-proof tires - Tires are flat-free and maintenance-free, 13-inch, white hub, four tires

Mi-T-M Corporation

800-553-9053

www.mitm.com

Fits Models All models

P R E S S U R E

W A S H E R S

Cold Water Diesel Belt Drive Diesel powered pressure washers are often chosen for the heavy-duty cleaning power needed by shipping and marine professionals. Boats, decks, docks, and other marine equipment are constantly exposed to the damaging effects of salt water and require constant cleaning. Oil and mining industry is another application where diesel powered pressure washers outperform their gas and electric counterparts.

CW Premium Series

Belt drive triplex piston General pump with ceramic plungers

CW-3004-4MDY

Pump - Stainless-steel and brass unloader with fixed pressure - Forged brass manifold - Thermal relief valve - Water filter with clear sleeve for screen inspection Engine - Professional Yanmar diesel engine Frame - Powder coated steel tube handles, base plate and enclosed belt guard - Hose wrap and gun/wand holder - Pneumatic tires with tubes and solid steel threaded axle - Rubber isolators

Model Number CW-3004-4MDY

PSI GPM HP/Engine 3000 3.5 9.0 HP Yanmar

2 7 YEAR LIMITED

YA N M A R E N G I N E WA R R A N T Y

YEAR LIMITED

PUMP WA R R A N T Y

Fuel Tank Capacity Dimensions (LxWxH) Ship Wt. 0.95 gallon 46in.x28in.x30in. 321 lbs.

Net Wt. 245 lbs.

ACCESSORIES & OPTIONS Part Number Description 50-0161 High pressure detergent injection - High pressure water mixes with detergent to clean even the heaviest build-up AW-8400-0021 Low pressure detergent injection - Allows the user to apply the recommended detergents CX-0005 Insulated dual lance - Has both a high and low pressure tip that allows you to switch to the low pressure chemical injector without having to change tips CX-0044 Electric start (battery included) - For easy starting CX-0056 Roll cage - Designed for cold water pressure washers to protect equipment, comes with a lifting hook, 11⁄4-inch powder coated steel tubing TX-1302-W Puncture-proof tires - Tires are flat-free and maintenance-free, 13-inch, white hub, two tires

www.mitm.com

800-553-9053

Fits Models CW-3004-4MDY CW-3004-4MDY CW-3004-4MDY CW-3004-4MDY CW-3004-4MDY CW-3004-4MDY

Mi-T-M Corporation

P R E S S U R E

W A S H E R S

Cold Water Electric Direct Drive CD Series

Designed for all-purpose cleaning, the lightweight CD Series pressure washers are ideal for homeowners and small industrial jobs. This electric model is perfect for applications where exhaust fumes are not allowed.

NEMA 5-15P, 15-amp plug

NEMA 5-20P, 20-amp plug

CD-1502-2MUH

Pump - Direct drive triplex piston General pump with ceramic plungers - Stainless-steel and brass unloader with adjustable pressure - Forged brass manifold - Thermal and safety relief valves - In-line water strainer - Adjustable low pressure detergent injection - Pump accepts incoming water up to 180°F (2MUH models) Motor - Totally enclosed fan-cooled electric motor with thermal overload protection - 35-foot, 15-amp power cord (20-amp plug on CD-1502 models) with ground fault circuit interrupter (GFCI) Frame - Powder coated steel mounting plate with center balanced lift and four rubber isolators Model Number CD-1002-0MUH CD-1002-2MUH* CD-1502-0MUH CD-1502-2MUH*

PSI 1000 1000 1500 1500

GPM 2.0 2.0 2.0 2.0

HP/Motor 1.5 HP, 120V, 1Ø, 12.5A 1.5 HP, 120V, 1Ø, 12.5A 2.0 HP, 120V, 1Ø, 17.0A 2.0 HP, 120V, 1Ø, 17.0A

Unit Includes - Variable high/low pressure nozzle with adjustable spray pattern (0MUH models) - 15° high/low pressure nozzle (2MUH models) - 25-foot x 3⁄8-inch non-marking hose with quick connects, swivel and bend restrictors - Professional-grade insulated trigger gun with safety lock-off - 36-inch two-piece insulated lance Warranties

1 7 YEAR LIMITED

YEAR LIMITED

PUMP ELECTRIC MOTOR WA R R A N T Y WA R R A N T Y

Plug Type NEMA 5-15P NEMA 5-15P NEMA 5-20P NEMA 5-20P

Dimensions (LxWxH) 20in.x11.5in.x14in. 20in.x11.5in.x14in. 20in.x11.5in.x14in. 20in.x11.5in.x14in.

Ship Wt. 70 lbs. 71 lbs. 76 lbs. 76 lbs.

Net Wt. 58 lbs. 66 lbs. 70 lbs. 70 lbs.

*Pump accepts incoming water up to 175°F.

ACCESSORIES & OPTIONS Part Number Description 18-0370 Rotating nozzle - Increase your cleaning power and decrease your cleaning time 18-0371 Rotating nozzle - Increase your cleaning power and decrease your cleaning time 50-0161 High pressure detergent injection - High pressure water mixes with detergent to clean even the heaviest build-up CX-0030 50-foot high pressure hose - For when you need extra hose for added mobility

Mi-T-M Corporation

800-553-9053

www.mitm.com

Fits Models CD-1502 models CD-1002 models All models All models

P R E S S U R E

W A S H E R S

Cold Water Electric Direct Drive JP Series

The portable electric JP Series features quiet operation and no exhaust which is ideal for indoor applications where exhaust fumes are prohibited. Designed for medium duty, commercial use.

NEMA 5-15P, 15-amp plug

NEMA 5-20P, 20-amp plug

NEMA L15-30P, NEMA 6-30P, 30-amp plug 30-amp plug

NEMA L15-20P, 20-amp plug

NEMA 6-20P, 20-amp plug

NEMA 6-50P, 50-amp plug

JP-2003, JP-2503 & JP-3004 Models

USA & Canada: JP-1002 & JP-1502 Models

Pump - Direct drive triplex piston General pump with ceramic plungers - Stainless-steel and brass unloader with adjustable pressure - Forged brass manifold - Thermal and safety relief valves - In-line water strainer - Adjustable low pressure detergent injection Motor - Totally enclosed fan-cooled electric motor - 35-foot power cord (ground fault circuit interrupter, GFCI, on 1.5 to 6.0-HP single-phase models) (10-foot power cord on 8.0-HP models) - NEMA 5-20P, 20 amp plug (1500-PSI models) Frame - 1-inch powder coated steel tube handles for easier pulling - Powder coated and welded steel base plate - Convenient gun/wand holder and hose wrap Model Number JP-1002-0ME1* JP-1002-2ME1*# JP-1502-0ME1* JP-1502-2ME1*# JP-2003-1ME1*# JP-2503-1ME1* JP-2503-0ME3

PSI 1000 1000 1500 1500 2000 2500 2500

GPM 2.0 2.0 2.0 2.0 2.8 3.2 3.2

JP-3004-1ME1 JP-3004-0ME3

3000 3.9 3000 3.9

HP/Motor 1.5 HP, 120V, 1Ø, 15.0A 1.5 HP, 120V, 1Ø, 15.0A 2.0 HP, 120V, 1Ø, 20.0A 2.0 HP, 120V, 1Ø, 20.0A 4.0 HP, 230V, 1Ø, 16.0A 6.0 HP, 230V, 1Ø, 24.1A 6.0 HP, 230V, 3Ø, 15.0A or 6.0 HP, 460V, 3Ø, 7.5A 8.0 HP, 230V, 1Ø, 34.5A 8.0 HP, 230V, 3Ø, 20.0A or 8.0 HP, 460V, 3Ø, 10.0A

JP-2003-1ME1

- Solid steel axle (threaded on 2000 to 3000-PSI models) - Pneumatic tires with tubes for longer life - Dual rubber isolators Unit Includes - Variable high/low pressure nozzle on 1000 to 2000-PSI models - Quick connect nozzles (0°, 15° and 25°) on 2500 & 3000-PSI models - 50-foot x 3⁄8-inch non-marking hose with quick connects, swivel and bend restrictors - Professional-grade insulated trigger gun with safety lock-off - 36-inch lance with rubber grip Warranties

1 7 YEAR LIMITED

YEAR LIMITED

PUMP ELECTRIC MOTOR WA R R A N T Y WA R R A N T Y

Plug Type NEMA 5-15P NEMA 5-15P NEMA 5-20P NEMA 5-20P NEMA 6-20P NEMA 6-30P NEMA L15-20P

Dimensions (LxWxH) 37in.x21in.x24.5in. 37in.x21in.x24.5in. 37in.x21in.x24.5in. 37in.x21in.x24.5in. 37in.x21in.x24.5in. 44in.x26in.x27in. 44in.x26in.x27in.

Ship Wt. 120 lbs. 120 lbs. 120 lbs. 120 lbs. 162 lbs. 275 lbs. 275 lbs.

Net Wt. 90 lbs. 90 lbs. 90 lbs. 90 lbs. 112 lbs. 225 lbs. 225 lbs.

NEMA 6-50P NEMA L15-30P

44in.x26in.x27in. 44in.x26in.x27in.

275 lbs. 275 lbs.

225 lbs. 225 lbs.

*35-foot cord with ground fault circuit interrupter (GFCI). #Pump accepts incoming water up to 175°F.

ACCESSORIES & OPTIONS Part Number Description 50-0161 High pressure detergent injection - High pressure water mixes with detergent to clean even the heaviest build-up CX-0005 Insulated dual lance - Has both a high and low pressure tip that allows you to switch to the low pressure chemical injector without having to change tips CX-0066 460V on 6.0-HP, 3-phase models - For when you have 460V of power available CX-0067 460V on 8.0-HP, 3-phase models - For when you have 460V of power available TX-1002-W Puncture-proof tires - Tires are flat-free and maintenance-free, 10-inch, white hub, two tires TX-1302-W Puncture-proof tires - Tires are flat-free and maintenance-free, 13-inch, white hub, two tires

www.mitm.com

800-553-9053

Fits Models All models All models JP-2503-0ME3 JP-3004-0ME3 1000 to 2000-PSI models 2500 to 3000-PSI models

Mi-T-M Corporation

P R E S S U R E

W A S H E R S

Cold Water Electric Belt Drive CW Premium Series

The electric version of the CW Series offers up to 5000-PSI of cleaning power. Perfect for heavily-soiled commercial and industrial equipment that requires indoor cleaning, electric pressure washers are much quieter than gas models and there is no need to worry about proper ventilation because of exhaust fumes. With a 7 year pump warranty, you know this unit is built to last. G

NEMA L15-30P, 30-amp plug

NEMA 15-50P, 50-amp plug

NEMA 6-50P, 50-amp plug

External bypass system allows more water into the system to protect from heat build-up CW-3004-4ME3

Pump - Belt drive triplex piston General pump with ceramic plungers - Stainless-steel and brass unloader - Forged brass manifold - Thermal relief valve - Water filter with clear sleeve for screen inspection Motor - Totally enclosed fan-cooled electric motor with thermal overload protection - 10-foot power cord Frame - Powder coated steel tube handles and base plate - Totally enclosed powder coated steel belt guard - Convenient gun/wand holder and hose wrap - Solid steel threaded axle - Pneumatic tires with tubes for longer life - Dual rubber isolators Model Number CW-2405-4ME1 CW-2405-4ME3* CW-3004-4ME1 CW-3004-4ME3* CW-3005-0ME1 CW-3005-0ME3* CW-4004-0ME3* CW-5004-0ME3*

PSI 2400 2400 3000 3000 3000 3000 4000 5000

GPM 4.6 4.6 3.5 3.5 4.8 4.8 3.9 4.0

1 7 YEAR LIMITED

YEAR LIMITED

PUMP ELECTRIC MOTOR WA R R A N T Y WA R R A N T Y

HP/Motor 7.5 HP, 230V, 1Ø, 35.7A 8.0 HP, 230V, 3Ø, 24.7A or 8.0 HP, 460V, 3Ø, 11.5A 7.5 HP, 230V, 1Ø, 35.0A 8.0 HP, 230V, 3Ø, 23.0A or 8.0 HP, 460V, 3Ø, 11.5A 10.0 HP, 230V, 1Ø, 37.5A 10.0 HP, 230V, 3Ø, 25.6A or 10.0 HP, 460V, 3Ø, 12.8A 15.0 HP, 230V, 3Ø, 40.0A or 15.0 HP, 460V, 3Ø, 20.0A 15.0 HP, 230V, 3Ø, 40.0A or 15.0 HP, 460V, 3Ø, 20.0A

Plug Type NEMA 6-50P NEMA L15-30P NEMA 6-50P NEMA L15-30P NEMA 6-50P NEMA 15-50P NEMA 15-50P NEMA 15-50P

Dimensions (LxWxH) 46in.x28in.x30in. 46in.x28in.x30in. 46in.x28in.x30in. 46in.x28in.x30in. 45.5in.x32.5in.x30in. 45.5in.x32.5in.x30in. 45.5in.x32.5in.x30in. 45.5in.x32.5in.x30in.

Ship Wt. 345 lbs. 255 lbs. 350 lbs. 330 lbs. 470 lbs. 450 lbs. 505 lbs. 505 lbs.

Net Wt. 333 lbs. 243 lbs. 338 lbs. 318 lbs. 396 lbs. 376 lbs. 431 lbs. 431 lbs.

*460V motors available as no-cost options.

Fits Models All models All models CW-2405-4ME3 & CW-3004-4ME3 models Insulated dual lance - Has both a high and low pressure tip that allows you to switch to the low pressure chemical All models injector without having to change tips 460V, 3-phase models - For when you have 460V of power available CW-4004 to CW-5004 models 460V, 3-phase models - For when you have 460V of power available CW-3005-0ME3 Puncture-proof tires - Tires are flat-free and maintenance-free, 13-inch, white hub, two tires All models

Mi-T-M Corporation

800-553-9053

www.mitm.com

P R E S S U R E

W A S H E R S

Cold Water Electric Belt Drive The stationary version of the CW electric series is designed for wash bays, golf courses and restaurant applications where mobility isn’t necessary. The stainless-steel package design ensures longevity even in the toughest environments.

NEMA 5-20P, 20-amp plug

NEMA L15-20P, 20-amp plug

CW Premium Series

NEMA L15-30P, 30-amp plug

NEMA 6-30P, 30-amp plug

CW-2004-SME1 shown with standard low pressure detergent injector

Belt drive triplex piston General pump with ceramic plungers accepts incoming water up to 175°

Pump - Stainless-steel and brass unloader - Forged brass manifold - Thermal relief valve - In-line water strainer - Quick connect low pressure detergent injection - Bypass system Motor - Open drip-proof motor (1000 & 3000-PSI models) - Totally enclosed fan-cooled electric motor with manual thermal overload protection (2000-PSI models) - 4-foot electrical cord with ground fault circuit interrupter (NEMA 5-20P, 20-amp plug on 1000-PSI model) Frame - Stainless-steel base and frame - Removable panel for pump access - Easy-to-access cabinet design - Four rubber isolators Model Number CW-1003-SME1 CW-2004-SME1 CW-2004-SME3 CW-3004-SME3

PSI 1000 2000 2000 3000

GPM 2.5 3.9 3.9 3.5

HP/Motor 2.0 HP, 120V, 1Ø, 18.8A 6.0 HP, 230V, 1Ø, 24.1A 6.0 HP, 230V, 3Ø, 15.0A 8.0 HP, 230V, 3Ø, 20.0A

Components - Dual cogged belt drive system for increased belt life - Conveniently located on/off switch - Time delay shutdown will shut unit off automatically when trigger gun CW-2004-SME3 shown on is released and timer reaches setting optional stainless-steel wall Unit Includes mounting bracket - Quick connect nozzles (0°, 15°, 25° and 40°) (AW-9501-0000) 3 - 50-foot x ⁄8-inch non-marking hose with quick connects, swivel and bend restrictors - Professional-grade insulated trigger gun with safety lock-off - Adjustable pressure insulated dual lance Warranties

1 7 YEAR LIMITED

YEAR LIMITED

PUMP ELECTRIC MOTOR WA R R A N T Y WA R R A N T Y

Plug Type NEMA 5-20P NEMA 6-30P NEMA L15-20P NEMA L15-30P

Dimensions (LxWxH) 29.5in.x20.5in.x15in. 29.5in.x20.5in.x15in. 29.5in.x20.5in.x15in. 29.5in.x20.5in.x15in.

Ship Wt. 222 lbs. 272 lbs. 262 lbs. 292 lbs.

Net Wt. 172 lbs. 214 lbs. 204 lbs. 234 lbs.

ACCESSORIES & OPTIONS Part Number Description AW-9501-0000 Stainless-steel wall mounting bracket - Provides a permanent location for your pressure washer in a shop or plant facility AW-9502-0000 Powder coated steel wall mounting bracket - Provides a permanent location for your pressure washer in a shop or plant facility CX-0069 Auto start/stop - When trigger gun is released, the timer will turn unit off; when trigger gun is pulled unit will restart CX-0076 460V, 3-phase models - For when you have 460V of power available CX-0077 460V, 3-phase models - For when you have 460V of power available CX-0078 Remote box - Adds control box which may be mounted away from unit to control on/off, N/A on models with auto start/stop CX-0087 208V, single-phase - For when you have 208V of power available CX-0088 208V, 3-phase models - For when you have 208V of power available CX-0090 208V, 3-phase models - For when you have 208V of power available

www.mitm.com

800-553-9053

Fits Models All models All models All models CW-2004-SME3 CW-3004-SME3 All models CW-2004-SME1 CW-2004-SME3 CW-3004-SME3

Mi-T-M Corporation

P R E S S U R E

W A S H E R S

Hot Water Designs HSP & HSE Series Burner Design 1. Large capacity exhaust tubes allow proper exhausting of combustion gases. 2. When troubleshooting a burner problem, the spark can easily be checked within seconds through the convenient sight glass. 3. Continuous wrap tubing coil eliminates butt welds which can cause leaks. The coil is lightweight and designed for easy replacement and durability. 4. The insulation pad is designed for easy replacement and durability. 5. Coil inlet/outlet connections with convenient coil drain, allows for easy draining of all water in coil to prevent freezing. 6. The combustion chamber drain allows for easy draining of water or fuel build-up. 7. With Mi-T-M's triple air flow design, the temperatures on the outer wrap are kept low enough to eliminate the need for coil insulation. This also increases the efficiencies of the fuel being burned by the ignition on the down-flow and the exhaust on the up-flow of the burner chamber. 8. Single wire-braided fuel hose prevents leakage, protects the system and won't crack or kink. 9. Electrodes and nozzle assembly are at top of burner for easy maintenance and troubleshooting.

C D

H E

HSP Series Patented EMF System In 1999, Mi-T-M Corporation received the patent for a unique ignition/firing system, Electro Magnetic Firing (EMF), which produces enough voltage for operation and proper burning of the HSP Series of hot water pressure washers.

B H

This system is designed with two sets of magnets that are used to produce electricity. The first set of magnets produces a low voltage of about 12 to 14 volts when passed by a coil known as a stator. This voltage is required for operation of the on/off switch, pressure and high limit switch, and the fuel solenoid. The second set of magnets passes by an ignition coil which produces a high voltage in the tens of thousands of volts. The spark is generated across the electrode gap and is enough to create proper ignition of either #1 diesel, #2 diesel or kerosene.

1. Engine sheave and dual set screw mount maintains proper alignment of pump shaft key. 2. The belt tension sheave creates proper belt tension so fuel pump discharges fuel upon demand. 3. The long lasting, non-corrosive flexible drive coupler protects EMF system if fuel pump locks up. 4. Fuel pump is a durable high quality pump that will deliver No. 1 or No. 2 diesel fuel or kerosene. 5. Stator coil/magnets are a low maintenance system that provide solenoid control voltage. 6. Fan provides burner air for proper combustion and clean exhaust smoke. It has an easily accessible air flow control. 7. Ignition coil provides voltage to electrodes for proper spark voltage, allowing accurate ignition of fuel every time the trigger is pulled. The ignition coil has a long life, is easily EMF system eliminates replaced and has a proven track record in the industry. the need for a 12V battery.

Mi-T-M Corporation

800-553-9053

www.mitm.com

F G

P R E S S U R E

W A S H E R S

Hot Water Gasoline Direct Drive HSP Series

One of our most popular hot water units, the HSP Series features our patented Electro Magnetic Firing (EMF) system which eliminates the need for a 12V battery to operate the burner. The top-fired heat exchanger is designed for easy maintenance. Patented Electro Magnetic Firing (EMF) system

Pump - Direct drive triplex piston AR pump with ceramic plungers - Stainless-steel and brass unloader valve - Forged brass manifold - Thermal relief valve - Low pressure detergent injection Engine - Performance-proven engine with low-oil protection and recoil start Frame - Reinforced powder coated steel tube frame with center balanced lifting hook - Powder coated steel hose reel mounting bracket - Wand holder - Solid steel threaded axles - Four pneumatic tires with tubes - Locking tire brake Components - High quality fuel filter/water separator ensures clean fuel supply - Complete system diagnostic board - On/off burner switch - Pressure and high limit safety controls - No. 1 or No. 2 diesel or kerosene fired burner (Bio-fuel not approved at this time) Model Number HSP-2403-3MGH HSP-2403-3MGR HSP-3003-3MGH HSP-3003-3MGR HSP-3504-3MGH HSP-3504-3MGR

PSI 2400 2400 3000 3000 3500 3500

GPM 2.6 2.6 2.9 2.9 3.3 3.3

Displacement/Engine 196cc Honda OHV 211cc Subaru OHC 270cc Honda OHV 265cc Subaru OHC 389cc Honda OHV 404cc Subaru OHC

Gas Tank Cap. 0.97 gallon 0.95 gallon 1.59 gallon 1.59 gallon 1.70 gallon 1.70 gallon

HSP-3504-3MGR

- Polyethylene burner fuel tank - Easy coil drain helps prevent freezing in cold weather - Energy efficient top-fired powder coated heat exchanger designed for convenient troubleshooting and easy maintenance Unit Includes - 50-foot x 3⁄8-inch steel wire-braided pressure hose with screw connects, swivel and bend restrictors - Professional-grade insulated trigger gun with safety lock-off - Adjustable pressure insulated dual lance with 15° fixed and detergent nozzle Miscellaneous - Temperature rise 150°F/66°C above ambient, maximum outlet temperature is 200°F Warranties

3 3 3 7 YEAR LIMITED

COIL WA R R A N T Y

Burner Fuel Tank Cap. 4.0 gallon 4.0 gallon 5.5 gallon 5.5 gallon 5.5 gallon 5.5 gallon

YEAR LIMITED

HONDA ENGINE WA R R A N T Y

YEAR LIMITED

PUMP SUBARU ENGINE WA R R A N T Y WA R R A N T Y

Burner Fuel Cons. 1.53 gph 1.53 gph 1.84 gph 1.84 gph 2.14 gph 2.14 gph

BTU Per Hour 205,000 205,000 253,000 253,000 294,000 294,000

Dimensions (LxWxH) 38in.x30in.x38in. 38in.x30in.x38in. 43in.x30in.x41in. 43in.x30in.x41in. 43in.x30in.x41in. 43in.x30in.x41in.

ACCESSORIES & OPTIONS Part Number Description 20-0464A52 Rain cap - Protects boiler from moisture build-up when unit is left outside HX-0098 Electric start (battery included) - For easy starting HX-0219 Electric start (battery included) - For easy starting TX-1004-W Puncture-proof tires - Tires are flat-free and maintenance-free, 10-inch, white hub, four tires TX-1304-W Puncture-proof tires - Tires are flat-free and maintenance-free, 13-inch, white hub, four tires

www.mitm.com

Ship Wt. 385 lbs. 385 lbs. 530 lbs. 530 lbs. 551 lbs. 551 lbs.

Net Wt. 269 lbs. 269 lbs. 407 lbs. 407 lbs. 428 lbs. 428 lbs.

Fits Models 3000 to 3500-PSI models HSP-3504-3MGH HSP-3504-3MGR 2400-PSI models 3000 to 3500-PSI models

800-553-9053

Mi-T-M Corporation

P R E S S U R E

W A S H E R S

Hot Water Gasoline/Diesel Belt Drive HS Series

If you are looking for a hot water pressure washer system to mount on either a single or dual-axle trailer, the HS Series is a popular option. The heavy-duty 1½-inch steel square tube frame is powder coated for durability and the control panel is easily accessible.

Pump - Belt drive triplex piston AR or General pump with ceramic plungers - Factory preset unloader - Forged brass manifold - 80-mesh, high volume, stainless-steel screen inlet water strainer Engine - Industrial gasoline or diesel engine with electric start (battery included) Frame - Heavy-duty powder coated 11⁄2-inch steel square tube frame Components - 2900-watt generator delivers clean power to the burner - Pressure relief valve protects against excessive system pressure - No. 1 or No. 2 diesel or kerosene fired burner (Bio-fuel not approved at this time) - Polyethylene burner and engine fuel tanks - 1⁄2-inch schedule 80-coil with stainless-steel wrap - Heavy-duty dual cogged belt drive system - High quality fuel filter/water separator ensures clean fuel supply

HS-4004-1MAH

Unit Includes - Quick connect nozzles (0°, 15°, 25° and 40°) - 50-foot x 3⁄8-inch steel wire-braided pressure hose with quick connects, swivel and bend restrictors - Professional-grade insulated trigger gun and adjustable pressure insulated dual lance with safety lock-off Miscellaneous - Temperature rise 150°F/66°C above ambient, maximum outlet temperature is 200°F Warranties

3 3 3 7 YEAR LIMITED

COIL WA R R A N T Y

YEAR LIMITED

HONDA ENGINE WA R R A N T Y

YEAR LIMITED

PUMP K U B O TA E N G I N E WA R R A N T Y WA R R A N T Y

GASOLINE MODELS Model Number HS-3505-1MGH HS-3506-1MGH HS-4004-1MAH#+

PSI 3500 3500 4000

GPM 4.7 5.6 4.0

Displacement/Engine 688cc Honda OHV 688cc Honda OHV 688cc Honda OHV

Fuel Tank Cap. 10.0 gallon 10.0 gallon 10.0 gallon

Burner Fuel Tank Cap. 10.0 gallon 10.0 gallon 10.0 gallon

Burner Fuel Cons. 3.37 gph 3.37 gph 3.37 gph

BTU Per Hour 471,800 471,800 471,800

Dimensions (LxWxH) 50in.x34in.x46in. 50in.x34in.x46in. 50in.x34in.x46in.

Ship Wt. 854 lbs. 864 lbs. 854 lbs.

Net Wt. 750 lbs. 760 lbs. 750 lbs.

PSI 3000 3500 4000

GPM 5.6 4.7 4.5

HP/Engine 15.5 HP Kubota 15.5 HP Kubota 15.5 HP Kubota

Fuel Tank Cap. 10.0 gallon 10.0 gallon 10.0 gallon

Burner Fuel Tank Cap. 10.0 gallon 10.0 gallon 10.0 gallon

Burner Fuel Cons. 3.37 gph 3.37 gph 3.37 gph

BTU Per Hour 471,800 471,800 471,800

Dimensions (LxWxH) 56.5in.x34in.x46in. 56.5in.x34in.x46in. 56.5in.x34in.x46in.

Ship Wt. 940 lbs. 940 lbs. 940 lbs.

Net Wt. 836 lbs. 836 lbs. 836 lbs.

DIESEL MODELS Model Number HS-3006-0MDK HS-3505-0MDK HS-4005-0MDK+

#Model equipped with AR pump, all other models equipped with General pumps. +Model equipped with trapping unloader, all other models equipped with K7 flow actuated unloader.

Mi-T-M Corporation

800-553-9053

www.mitm.com

P R E S S U R E

W A S H E R S

Hot Water Gasoline/Diesel Belt Drive HS Series

HS-3505-0MDK

ACCESSORIES & OPTIONS Part Number Description 20-1070A18 Removable painted front panel - Provides a protective panel and gives unit a more finished look AW-5740-0000 Wheel kit - Allows unit to become portable HX-0130 Three-way ball valve - Allows pressure washer to be operated from garden hose/float tank or trailer supply tank by adjusting ball valve lever HX-0131 High pressure detergent injection (K7) - Supplies soap injection through the high pressure pump while spraying; pressure washers with K7 flow actuated unloaders only HX-0133 Steam combination 250°F (K7) - Increases outlet temperature to 250°F. Steam option for models equipped with K7 flow actuated unloaders HX-0135 Steam combination 250°F (K7) - See HX-0133 for option description HX-0136 Steam combination 250°F (K7) - See HX-0133 for option description HX-0139 Steam combination 250°F (requires trapping unloader) - Increases outlet temperature to 250°F HX-0140 Steam combination 250°F (requires trapping unloader) - Increases outlet temperature to 250°F HX-0141 Steam combination 250°F (requires trapping unloader) - Increases outlet temperature to 250°F HX-0142 Steam combination 250°F (requires trapping unloader) - Increases outlet temperature to 250°F HX-0143 Trapping unloader - High pressure water is trapped in outlet hose when trigger gun is released HX-0144 Dual gun (requires trapping unloader) - Two guns may be sprayed at the same time; flow is divided between the two guns while each operator maintains equal system pressure HX-0145 Adjustable temperature control - Operator is able to adjust outlet water temperature between 96°-198°F HX-0146 Hour meter - Displays number of hours unit has been in operation HX-0147 Four point lifting capability - Allows unit to be lifted by crane HX-0148 Detergent (requires trapping unloader) - Supplies soap injection through the high pressure pump while spraying; pressure washers with pressure trapping unloader only HX-0200 Trapping unloader - High pressure water is trapped in outlet hose when trigger gun is released

Fits Models All models All models All models 3000 to 3500-PSI models HS-3505 models HS-3506-1MGH HS-3006-0MDK HS-3505 models HS-3506-1MGH HS-3006-0MDK 4000-PSI models HS-3006 & HS-3506 models HS-3006 & HS-3506 models All models All models All models HS-3500 & 4000-PSI models HS-3505 models

Note: To order options HX-0139 to HX-0142, HX-0144 or HX-0148 you must order option HX-0143 or HX-0200 (not required for 4000-PSI models, which already come equipped with trapping unloader.)

www.mitm.com

800-553-9053

Mi-T-M Corporation

P R E S S U R E

W A S H E R S

Hot Water Electric Direct/Belt Drive HSE Series

If you’re looking for a hot water unit with large volume capacity, look no further. The HSE Series works great in industrial applications requiring 20 or more hours per week and is built for longevity. The top-fired heat exchanger is energy efficient and designed for convenient troubleshooting.

Pump - Direct or belt drive triplex General pump with ceramic plungers - Stainless-steel and brass unloader valve - Forged brass manifold - Thermal relief valve - High pressure detergent injection (low pressure on HSE-1002-0M11) Motor - Totally enclosed fan-cooled electric motor with manual thermal overload protection - 35-foot power cord with in-line GFCI which meets required CSA certification (GFCI not available on 3000 & 3500-PSI models) - Solid state electronic ignition Frame - Reinforced powder coated steel tube frame with center balanced lifting hook - Powder coated steel hose reel mounting bracket - Electric cord hanger - Powder coated steel gun/wand holder - Solid steel threaded axles - Four pneumatic tires with tubes - Locking tire brake Components - Energy-efficient top-fired heat exchanger designed for convenient troubleshooting and easy maintenance - High-quality fuel filter/water separator ensures clean fuel supply - Heavy-duty dual cogged belt drive system to prevent slippage (Belt drive models) - Complete system diagnostic board - Float tank (Not available on HSE-1002-0M11) - Pressure and high limit safety controls - No. 1 or No. 2 diesel or kerosene fired burner (Bio-fuel not approved at this time) - Polyethylene burner fuel tank - Easy coil drain helps prevent freezing in cold weather Unit Includes - 50-foot x 3⁄8-inch steel wire-braided pressure hose with screw connects, swivel and bend restrictors - Professional-grade insulated trigger gun with safety lock-off - Adjustable pressure insulated dual lance with 15° fixed and detergent nozzle DIRECT DRIVE MODELS Model Number HSE-1002-0M11* HSE-1002-0M10 HSE-1002-SM10^ HSE-1502-0M10 HSE-2003-0M10

PSI 1000 1000 1000 1500 2000

GPM 2.0 2.0 2.0 2.0 2.8

HP/Motor 1.5 HP, 120V, 1Ø, 15.0A 1.5 HP, 120V, 1Ø, 15.0A 1.5 HP, 120V, 1Ø, 15.0A 2.0 HP, 120V, 1Ø, 19.0A 4.0 HP, 230V, 1Ø, 18.0A

HSE-1002-0M10 Miscellaneous - Temperature rise 150°F/66°C above ambient, maximum outlet temperature is 200°F - Water output temperature is 190°-200°F (Excludes HSE-1002-SM10) - Water output temperature for "wet" steam is approximately 250°F (HSE-1002-SM10) - Operates at 650-PSI in "wet" steam mode (HSE-1002-SM10) Warranties

1 3 7 YEAR LIMITED

YEAR LIMITED

COIL ELECTRIC MOTOR WA R R A N T Y WA R R A N T Y

PUMP WA R R A N T Y

Plug Type NEMA 5-15P NEMA 5-15P NEMA 5-15P NEMA 5-20P NEMA 6-20P

Burner Fuel Tank Cap. 4.0 gallon 4.0 gallon 4.0 gallon 4.0 gallon 4.0 gallon

Burner Fuel Cons. 1.33 gph 1.33 gph 1.33 gph 1.33 gph 1.53 gph

BTU Per Hour 186,000 186,000 186,000 186,000 214,000

Dimensions (LxWxH) 34in.x29in.x33in. 34in.x29in.x33in. 34in.x29in.x33in. 34in.x29in.x33in. 34in.x29in.x33in.

Ship Wt. 368 lbs. 368 lbs. 368 lbs. 373 lbs. 393 lbs.

Net Wt. 245 lbs. 245 lbs. 245 lbs. 250 lbs. 270 lbs.

Plug Type NEMA 6-30P NEMA L15-20P NEMA 6-50P NEMA L15-30P NEMA 6-50P NEMA L15-30P

Burner Fuel Tank Cap. 10.0 gallon 10.0 gallon 10.0 gallon 10.0 gallon 10.0 gallon 10.0 gallon

Burner Fuel Cons. 2.10 gph 2.10 gph 2.10 gph 2.10 gph 2.10 gph 2.10 gph

BTU Per Hour 294,000 294,000 294,000 294,000 294,000 294,000

Dimensions (LxWxH) 49.5in.x28in.x40.5in. 49.5in.x28in.x40.5in. 49.5in.x28in.x40.5in. 49.5in.x28in.x40.5in. 49.5in.x28in.x40.5in. 49.5in.x28in.x40.5in.

Ship Wt. 699 lbs. 688 lbs. 737 lbs. 732 lbs. 761 lbs. 742 lbs.

Net Wt. 569 lbs. 558 lbs. 607 lbs. 602 lbs. 631 lbs. 612 lbs.

*Low pressure detergent injection. ^Combination wet steam cleaner/pressure washer.

BELT DRIVE MODELS Model Number HSE-2504-0M10 HSE-2504-0M30 HSE-3004-0M10 HSE-3004-0M30 HSE-3504-0M10 HSE-3504-0M30 22

PSI 2500 2500 3000 3000 3500 3500

GPM 3.2 3.2 3.5 3.5 3.3 3.3

Mi-T-M Corporation

HP/Motor 6.0 HP, 230V, 1Ø, 25.0A 6.0 HP, 230-460V, 3Ø, 16.0A 8.0 HP, 230V, 1Ø, 36.0A 8.0 HP, 230-460V, 3Ø, 24.0A 10.0 HP, 230V, 1Ø, 39.0A 10.0 HP, 230-460V, 3Ø, 28.0A

800-553-9053

www.mitm.com

P R E S S U R E

W A S H E R S

Hot Water Electric Direct/Belt Drive HSE Series

NEMA 5-15P, 15-amp plug

NEMA 5-20P, 20-amp plug

NEMA L15-20P, 20-amp plug

NEMA 6-20P, NEMA L15-30P, NEMA 6-30P, 20-amp plug 30-amp plug 30-amp plug

NEMA 6-50P, 50-amp plug

HSE-3004-0M10 OPTIONS Part Number HX-0050 HX-0051 HX-0052 HX-0053 HX-0054 HX-0055 HX-0056 HX-0057

HX-0058 HX-0059 HX-0070 HX-0071 HX-0072 HX-0073 HX-0074 HX-0075 HX-0076 HX-0077 HX-0085 HX-0086 HX-0087 HX-0088 HX-0161 HX-0214 TX-1004-W TX-1304-W

Description Auto start/stop - When trigger gun is released, the timer will turn unit off; when trigger gun is pulled unit will restart

Fits Models HSE-1002-0M11 & 1002-0M10 & HSE-1502-0M10 Auto start/stop - When trigger gun is released, the timer will turn unit off; when trigger gun is pulled unit will restart HSE-2003-0M10 Auto start/stop - steam - Auto start/stop option - when trigger gun is released, the timer will turn unit off; when trigger HSE-1002-0M11 & gun is pulled unit will restart; Steam option - reduces pressure to 350-PSI by adjusting unloader valve counter-clockwise, HSE-1002-0M10 spray temperatures will rise 240째F above ambient with a maximum of 300째F Auto start/stop - steam - See HX-0052 for option description HSE-1502-0M10 Auto start/stop - steam - See HX-0052 for option description HSE-2003-0M10 Auto start/stop - CAD cell - Auto start/stop option - when trigger gun is released, the timer will turn unit off; when HSE-1002-0M11 & 1002-0M10 trigger gun is pulled unit will restart; CAD cell option - monitors burner for proper ignition & HSE-1502-0M10 Auto start/stop - CAD cell - See HX-0055 for option description HSE-2003-0M10 Auto start/stop - steam - CAD cell - Auto start/stop option - when trigger gun is released, the timer will turn unit off; HSE-1002-0M11 & when trigger gun is pulled unit will restart; Steam option - reduces pressure to 350-PSI by adjusting unloader valve HSE-1002-0M10 counter-clockwise, spray temperatures will rise 240째F above ambient with a maximum of 300째F; CAD cell option monitors burner for proper ignition Auto start/stop - steam - CAD cell - See HX-0057 for option description HSE-1502-0M10 Auto start/stop - steam - CAD cell - See HX-0057 for option description HSE-2003-0M10 Auto start/stop - See HX-0050 for option description 2500 to 3500-PSI models Auto start/stop - steam - See HX-0052 for option description 2500-PSI models Auto start/stop - steam - See HX-0052 for option description 3000-PSI models Auto start/stop - steam - See HX-0052 for option description 3500-PSI models Auto start/stop - CAD cell - See HX-0055 for option description 2500 to 3500-PSI models Auto start/stop - steam - CAD cell - See HX-0057 for option description 2500-PSI models Auto start/stop - steam - CAD cell - See HX-0057 for option description 3000-PSI models Auto start/stop - steam - CAD cell - See HX-0057 for option description 3500-PSI models 460V - Upgrades 230V 3-phase models to operate at 460V 3-phase HSE-2504-0M30 460V - Upgrades 230V 3-phase models to operate at 460V 3-phase HSE-3004-0M30 460V - Upgrades 230V 3-phase models to operate at 460V 3-phase HSE-3504-0M30 Skid feet - Stationary applications 2500 to 3500-PSI models Hour meter - Displays number of hours unit has been in operation 2000 to 3500-PSI models Hour meter - Displays number of hours unit has been in operation 1000 to 1500-PSI models Puncture-proof tires - Tires are flat-free and maintenance-free, 10-inch, white hub, four tires 1000 to 2000-PSI models Puncture-proof tires - Tires are flat-free and maintenance-free, 13-inch, white hub, four tires 2500 to 3000-PSI models

www.mitm.com

800-553-9053

Mi-T-M Corporation

P R E S S U R E

W A S H E R S

Hot Water Natural Gas/LP Belt Drive HG Series

The stationary HG Series pressure washers are a perfect choice for wash bays that require a steady fuel source. Available in either natural gas or LP, this unit features an electronic ignition with an intermittent pilot.

Pump - Belt drive triplex piston General pump with ceramic plungers - Factory preset trapping unloader - Thermal relief valve - Adjustable high pressure detergent injection Motor - Open drip-proof motor with manual thermal overload protection Frame - Powder coated steel side panels and frame Components - Natural gas or LP gas-fired (vapor only) natural draft with aspirating-type burner, 10-inch stack - Pressure switch and over-pressure safety controls - 24-volt control system - Polyethylene float tank (4-gallon with in-line screen filter) - 1⁄2-inch schedule 80-coil heat exchanger - Adjustable thermostat - Electronic ignition with an intermittent pilot Unit Includes - 21-inch draft diverter, 10-inch opening - Quick connect nozzles (0°, 15° 25° and 40°) - 50-foot x 3⁄8-inch steel wire-braided pressure hose with quick connects, swivel and bend restrictors - Professional-grade insulated trigger gun with safety lock-off - Adjustable pressure insulated dual lance with fixed detergent nozzle Miscellaneous - Maximum outlet temperature is 200°F (250°F/121°C outlet temperature with steam option) Model Number HG-2004-1208 HG-2004-3208 HG-2004-1230 HG-2004-3230 HG-2004-3460 HG-3004-1208 HG-3004-3208 HG-3004-1230 HG-3004-3230 HG-3004-3460 OPTIONS Part Number HX-0104 HX-0105 HX-0106 HX-0107 HX-0108 HX-0109 HX-0110 HX-0111 HX-0112 HX-0120 HX-0121 HX-0124

PSI 2000 2000 2000 2000 2000 3000 3000 3000 3000 3000

GPM 4.2 4.2 4.2 4.2 4.2 3.9 3.9 3.9 3.9 3.9

HP/Motor 6.0 HP, 208V, 1Ø, 28.2A 6.0 HP, 208V, 3Ø, 18.5A 6.0 HP, 230V, 1Ø, 25.5A 6.0 HP, 230V, 3Ø, 16.0A 6.0 HP, 460V, 3Ø, 8.0A 8.0 HP, 208V, 1Ø, 40.5A 8.0 HP, 208V, 3Ø, 23.0A 8.0 HP, 230V, 1Ø, 37.0A 8.0 HP, 230V, 3Ø, 20.0A 8.0 HP, 460V, 3Ø, 10.0A

Certified for 0 to 2000-feet above sea level (Except on HG-3004-1208)

HG-3004-3460 Warranties

1 3 7 YEAR LIMITED

COIL ELECTRIC MOTOR WA R R A N T Y WA R R A N T Y

BTU Per Hour Natural Gas 338,000 338,000 338,000 338,000 338,000 338,000 338,000 338,000 338,000 338,000

YEAR LIMITED

PUMP WA R R A N T Y

BTU Per Hour LP Gas 326,000 326,000 326,000 326,000 326,000 326,000 326,000 326,000 326,000 326,000

Professional Installation Required Dimensions (LxWxH) 56.5in.x29in.x49.75in. 56.5in.x29in.x49.75in. 56.5in.x29in.x49.75in. 56.5in.x29in.x49.75in. 56.5in.x29in.x49.75in. 56.5in.x29in.x49.75in. 56.5in.x29in.x49.75in. 56.5in.x29in.x49.75in. 56.5in.x29in.x49.75in. 56.5in.x29in.x49.75in.

Ship Wt. 844 lbs. 844 lbs. 844 lbs. 844 lbs. 844 lbs. 878 lbs. 878 lbs. 878 lbs. 878 lbs. 878 lbs.

Description K7 unloader (flow activated) (auto start/stop N/A) - Converts pressure trapping unloader system to flow actuated K7 unloader Liquid propane (vapor only) - Converts natural gas pressure washer to operate on liquid propane (vapor only) Hour meter - Displays number of hours unit has been in operation Time delay shutdown - Timer will shut unit off automatically when trigger gun is released and timer reaches setting (1) remote station (auto start/stop N/A) - Adds control box which may be mounted away from unit to control on/off, burner and soap injection Time delay shutdown and first remote box (kit option) - Timer will shut unit off automatically when trigger gun is released and timer reaches setting; adds control box which may be mounted away from unit to control on/off, burner and soap injection Additional remotes (up to 3) - Additional remotes that may be added to unit after the first remote is installed Auto start/stop - When trigger gun is released, the timer will turn unit off; when trigger gun is pulled unit will restart K7 unloader (flow activated) (auto start/stop N/A) - Converts pressure trapping unloader system to flow actuated K7 unloader 250°F steam upgrade - Steam valve increases outlet temperature to 250°F while lowering system pressure 250°F steam upgrade - Steam valve increases outlet temperature to 250°F while lowering system pressure Auto start/stop and first remote option - When trigger gun is released, the timer will turn unit off; when trigger gun is pulled unit will restart; adds control box which may be mounted away from unit to control on/off, burner and soap injection

Note: You cannot order HX-0107 and HX-0108 together, you will need to order HX-0109 instead. HX-0107 and HX-0108 can be ordered separately.

YEAR LIMITED

Mi-T-M Corporation

800-553-9053

www.mitm.com

Net Wt. 724 lbs. 724 lbs. 724 lbs. 724 lbs. 724 lbs. 758 lbs. 758 lbs. 758 lbs. 758 lbs. 758 lbs. Fits Models HG-3004 models All models All models All models All models All models All models HG-3004 models HG-2004 models HG-2004 models HG-3004 models All models

P R E S S U R E

W A S H E R

A C C ess o ries

Nozzles, Brush, Surface Cleaners Finding the right pressure washer accessory for your cleaning task is absolutely essential. Using the wrong nozzle or tip could create adverse results, like damage from too much pressure or ineffective cleaning from too little pressure. There are a variety of different pressure washer accessories to choose from and each will perform a job different from the other. The rotating brush is useful for scrubbing away dirt, grit, grime or other surface build-up. For big jobs like driveways, decks and patios, a water broom or surface cleaner attachment is a great choice. Mi-T-M offers everything from hoses to reels and brushes to wands, just what you need to get the job done right.

Rotary Surface Cleaners Clean large surfaces faster and easier than with a standard cleaning nozzle. The Mi-T-M rotary surface cleaners are equipped with strong-bristled brushes for long life and easy glide control. This cleaning accessory can be used on decks, patios, sidewalks, driveways, pool decks, parking lots and any other horizontal surface. AW-7020-8000 - 18-inch diameter - 4000-PSI rated - Heavy-duty, lightweight aluminum portable handle - Heat-treated sealed pressure swivel - requires no maintenance - 212°F maximum temperature - 3.0 to 10.0-GPM water volume AW-7020-8001 - 28-inch diameter - 4000-PSI rated - Lightweight, portable frame with walk-behind design - Large wheels for mobility - Professional-grade aluminum housing - Heat-treated sealed pressure swivel requires no maintenance - 212°F maximum temperature - 3.0 to 10.0-GPM water volume AW-7020-8002 - 20-inch diameter - 4000-PSI rated - Heavy-duty anodized aluminum handle - Professional-grade high pressure trigger gun - Heat-treated unsealed pressure swivel - requires maintenance - 200°F maximum temperature - 3.0 to 8.0-GPM water volume

Rotating Nozzles

Rotating Brush

Rotating nozzles increase your cleaning power and decrease your cleaning time. They offer 0° spray impact with 25° coverage. Nozzles include filter with quick connect and offer heavy-duty components for long life and reliability. Can be used on sidewalks, driveways, track vehicles, muddy areas, old peeling paints and concrete surfaces. AW-7004-Series* - 6000-PSI rated - 212°F temperature rating AW-7300-Series* - 3600-PSI rated - 190°F temperature rating AW-7500-Series* - 6000-PSI rated - 212°F temperature rating *Consult factory for correct orifice size

The rotating brush offers low pressure rotation for hard to remove debris on sensitive surfaces. Can be used on painted surfaces, fiberglass, wood or brick. AW-7003-1500 - Natural hair bristles - Quick connect - Adjustable angle - 3.0 to 6.0-GPM flow rate - 176° temperature rating - Can be used with low pressure detergent injector

0°

25°

Rotating Nozzle www.mitm.com

800-553-9053

Mi-T-M Corporation

P R E S S U R E

W A S H E R

access o ries

Detergents, Oil, Tires, Roll Cages Detergents All Purpose Cleaner The most versatile and efficient all-around cleaner. Use all purpose cleaner on vehicles, glass, stainless-steel, aluminum, painted surfaces and lawn equipment. AW-4018-0026 (1-gallon, 4 per case) AW-4018-0005 (5-gallon) AW-4018-0055 (55-gallon) - Environmentally friendly, will not harm plants, biodegradable - Indoor and outdoor use - Hard water stable prevents spotting Deck & House Wash Deck & House wash removes mildew and dirt. It is recommended for decks, homes and wooden surfaces. AW-4034-0026 (1-gallon, 4 per case) AW-4034-0005 (5-gallon) AW-4034-0055 (55-gallon) - Environmentally friendly, will not harm plants, biodegradable - Hard water stable prevents spotting

Heavy-Duty Degreaser Heavy-duty degreaser is great for the removal of oil and grease. It is capable of handling all your equipment and automotive cleaning needs. AW-4059-0026 (1-gallon, 4 per case) AW-4059-0005 (5-gallon) AW-4059-0055 (55-gallon) - Contains rust inhibitors to reduce corrosion - Hard water stable prevents spotting

Pump Oil Mi-T-Mâ&#x20AC;&#x2122;s pump oil offers trouble-free performance with no lubricant related failures. Our pump oil is specially designed for pressure washer pumps. It will keep pumps cooler than regular oil and is suitable for all climates. AW-4085-0016 (1-pint, 6 or 12 per case) - Convenient pour spout and resealable cap - Contains rust and corrosion additives, anti-wear additives, foam suppressant and dispersant for system cleanliness

Pump Saver Pump saver provides longer pump life, prevents harmful build-up of hard water mineral deposits, preserves seals and pistons and protects against freezing for safe, cold weather storage. AW-4070-0004 (6-oz.) - For use with all pressure washers - Protects pressure washer when not in use

Mi-T-M Corporation

800-553-9053

www.mitm.com

Roll Cage Designed to protect cold water pressure washers. CX-0054 (Fits CW Premium Series with Honda and Subaru engines) CX-0055 (Fits CW-4004-3MV0) CX-0056 (Fits CW-3004-4MDY) - Lifting hook - 11â &#x201E;4-inch powder coated steel tubing - Retro-fits to existing frame

P R E S S U R E

W A S H E R

A C C ess o ries

Injectors, Nozzles, Hoses Low Pressure Detergent Injector

Digital Hour Meter/Tachometer

The low pressure detergent injector allows you to apply recommended detergents. Can be used on cars, boats, vans and engines. AW-8400-0021 (2000 to 4000-PSI) AW-8000-0001 (5000-PSI) - Adjustable chemical draw - Clear, pliable detergent hose - Solid brass body with stainless steel orifice for durability - Quick connects for easy installation

32-0416 - Simple hour meter with tachometer - Updates every 3 seconds - RPM to 9,900

High Pressure Detergent Injector With the high pressure detergent injector, large tasks become small. High pressure washer mixes with detergent to clean even the heaviest build-up. Can be used on farm equipment, tractor trailers, RVs and bridges. 50-0161 - Brass and stainless-steel construction - 2.0-GPM minimum operating capacity - 6.0-GPM maximum operating capacity - Steel mesh in-line water strainer

Sand Injector Wet sandblasting is efficient and dust-free. Remove coatings from steel and concrete surfaces. Can be used on rust, paint, stains and graffiti. AW-3000-0000 (Sand injector - carbide tip) - Includes sand probe and clear hose - Consult factory before ordering 18-0113 (Carbide replacement nozzle)

Extension Hoses When you need extra mobility and length. Cold Water 851-0006 (4000-PSI, R2) 851-0317 (5000-PSI, R2) 851-0338 (4000-PSI, R1) 851-0362 (6000-PSI, R2) - 50-foot x 3⁄8-inch I.D. - Non-marking - Includes quick connects, swivel and bend restrictors - Chemical resistant - Wire-braided 15-0006 (Industrial water supply) - 50-foot x 3⁄4-inch Hot Water 15-0077 (Steam combination, 3000-PSI, R1) 850-0174 (2500-PSI & HSP Models, R1) 850-0199 (4000-PSI & HSP Models, R2) - 50-foot x 3⁄8-inch I.D. - Includes screw connects, swivel and bend restrictors 15-0146 (3000-PSI, 50-foot x 3⁄8-inch, R1) 15-0160 (4500-PSI, 75-foot x 3⁄8-inch, R2) 15-0161 (4500-PSI, 100-foot x 3⁄8-inch, R2) 15-0162 (4500-PSI, 150-foot x 3⁄8-inch, R2) 15-0163 (4500-PSI, 200-foot x 3⁄8-inch, R2) - 3⁄8-inch male swivel - For use with hose reels 15-0006, 15-0077, 15-0146, 850-0174, 850-0199, 851-0006, 851-0317, 851-0338, 851-0362 15-0160 15-0161 15-0162 15-0163 50-ft.

75-ft.

100-ft.

150-ft.

200-ft.

Long Range Chemical Nozzle 18-0373 - Quick connects to the end of the wand - Low pressure - Has a range of 30-feet while drawing chemical

www.mitm.com

800-553-9053

Mi-T-M Corporation

P R E S S U R E

W A S H E R

Hose Reels

access o ries

Hose Reels Hose reels are convenient for the storage of hoses. Reel capacities based on R1 Mi-T-M hoses. 50-0136 (13-inch reel, 100-foot maximum hose length) 50-0137 (16-inch reel, 200-foot maximum hose length) 50-0164 (13-inch reel without swivel, 100-foot maximum hose length) 50-0165 (16-inch reel without swivel, 200-foot maximum hose length) - Frame mount - 360째 pivoting action on 50-0136 & 50-0137 hose reels - Non-pivoting action on 50-0164 & 50-0165 hose reels - Easy mount bracket design - Clean hands hose guide - Live system Note: Hose reels 50-0164 & 50-0165 must be mounted with 50-0172 (45째 bracket). Also, 23-0307 (elbow) and 23-0243 (reducer) are required for jumper hose mounting.

B E

F G

50-0140 Bracket - Bar 29-inch (CWC Series)

B AW-0050-0138 Bracket - Universal mount (HS Series)

13-0208A01 Bracket - 45째 for mounting reels without swivel

D 13-0207A01 Bracket - Wall mount (HG Series)

13-0210A01 Bracket - 90째 for mounting reels without swivel

800-553-9053

Mi-T-M Corporation

13-0175A01 Bracket - Cold water base mount (JCW & CW Series)

www.mitm.com

23-0243 Reducer

E F G

23-0307 Elbow

Jumper Hoses 852-0138 Screw connect, 40-inch (HSP & Large HSE Series) 852-0139 Quick connect, 40-inch (Cold water) 852-0161 Screw connect, 57-inch (Small HSE Series) 850-0278 Quick connect, 85-inch (HS Series)

P R E S S U R E

W A S H E R

A C C ess o ries

Extended Reach Wands, Parts Kit Extended Reach Wands

Pressure Washer Replacement Parts Kit

Clean hard to reach places by using extended reach wands. Can be used on siding, house eaves, farm equipment, semi-tractor trailers and multi-story buildings. Fiberglass Wand AW-7015-1200 (12-foot) AW-7015-1800 (18-foot) AW-7015-2400 (24-foot) - Professional-grade trigger gun with safety lock-off - Complete with quick connects - Extends from 6-feet to 12, 18 or 24-feet - Lightweight and easy to control - Compatible with all makes of pressure washers rated up to 3500-PSI - Easy hose retraction

Everything you need to keep your pressure washer up and running. See chart for part numbers needed to order the kit. - Secure case locking system to keep lid latched and parts secure - Diagram card includes Mi-T-M part numbers for quick reorder reference - Lid hinges to reveal kit components and location - Storage compartments with adjustable plastic separators, keeps all parts organized for easy access - Durable case is made of heavy plastic to withstand abuse

Aluminum Wand AW-7014-1800 (18-foot) AW-7014-2400 (24-foot) - Professional-grade trigger gun with safety lock-off - Complete with quick connects - Extends from 6-feet, 5-inches to 18 or 24-feet - Push-button locks - Compatible with all makes of pressure washers rated up to 4000-PSI - Includes belt for additional support

Telescoping Wand Belt Telescoping wand belt holds telescoping wands, reduces fatigue and strain. Provides better operator control, optimizing cleaning performance. AW-7015-0001 - Works with AW-7015 and AW-7014 telescoping wands - Includes three plastic snap-on clips that snaps to your shoulder, waist and the wand

Includes a parts chart that fits into the plastic lid with a numbered diagram for identification. Also includes an application chart for easy part recognition and unit capability.

Part Number 17-0001 17-0002 17-0004 17-0005 17-0006 17-0007 17-0028 17-0029 18-0028 18-0029 18-0030 18-0031 18-0257 18-0258 18-0259 18-0260 18-0302 18-0150 18-0303 18-0304 18-0148 19-0050 25-0122 25-0123 62-0174

Description ⁄4 F x 1⁄4 socket 1 ⁄4 M x 1⁄4 plug 3 ⁄8 F x 3⁄8 socket 3 ⁄8 M x 3⁄8 plug 3 ⁄8 F x 3⁄8 plug 3 ⁄8 M x 3⁄8 socket 1 ⁄4 M x 1⁄4 socket 1 ⁄2 M x 3⁄8 socket 4.0 orifice, 0° (red) 4.0 orifice, 15° (yellow) 4.0 orifice, 25° (green) 4.0 orifice, 40° (white) 3.5 orifice, 0° (red) 3.5 orifice, 15° (yellow) 3.5 orifice, 25° (green) 3.5 orifice, 40° (white) 3.0 orifice, 0° (red) 3.0 orifice, 15° (yellow) 3.0 orifice, 25° (green) 3.0 orifice, 40° (white) 65° chemical injector nozzle Chemical injector strainer O-ring seal (tips) O-ring seal ( 3 ⁄8-inch quick connect) Replacement parts box 1

www.mitm.com

Quantity 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 10 10 1

800-553-9053

Mi-T-M Corporation

P R E S S U R E

W A S H E R

access o ries

Display Racks

Capture your customers' attention with equipment display racks and risers while making the most of your limited floor space. Mi-T-M offers several styles to choose from and each are manufactured from heavy-duty powder coated steel. Compact yet sturdy enough to hold pressure washers, air compressors, generators, portable heaters, and wet/dry vacuums.

Equipment Display Rack

Equipment Display Risers

This equipment display rack is a perfect way to present Mi-T-M industrial equipment to your customers. Compact yet strong enough to hold direct drive pressure washers, 5-gallon air compressors and inverter generators. The upright design offers great visibility to showcase each of the products it holds without using a lot of valuable floor space. AW-9300-0018 (3-tier powder coated display rack) 41-0466 (Product display signs; Includes 1 of each: 5-gallon air compressors, inverter generators and direct drive pressure washers) 64-6043 (Acrylic literature holder) 64-6044 (Industrial equipment pocket guides; 25-pack) AW-9300-0027 (Rack kit, includes 41-0466, 64-6043 & 64-6044) - Three-tier equipment display rack - Durable powder coated steel frame - Mesh powder coated steel shelves to hold equipment - Includes literature holder for Mi-T-M pocket guides - Display signs included Rack Dimensions: Rack Assembly 26.81-in. W x 43-in. D x 69.75-in. H Shelf Dimensions: Top Shelf 24-in. W x 20.875-in. D Middle Shelf 24-in. W x 31.25-in. D Units sold separately Bottom Shelf 24-in. W x 42.625-in. D

These display risers are the perfect way to elevate Mi-T-M industrial equipment. Compact and sturdy to hold air compressors, generators, pressure washers, portable heaters and wet/dry vacuums. Stackable for multi-level displays of your Mi-T-M equipment. AW-9300-0019 (Powder coated display riser) - Durable wrinkle-finish powder coated steel frame and top - Occupies a modest amount of valuable floor space - Stackable design for grouped displays at various heights - Raises equipment off of floor - Heavy-duty base construction Rack Dimensions: 26-in. W x 26-in. D x 12-in. H

Product Display Rack Compact display rack solves your limited retail floor space issues. AW-9300-0013 (Display rack; includes header card, magnets and literature holder) AW-0013-0154 (Display shelves; 2 maximum) 13-0176A18 (Generator stop bracket; 4 maximum) - Easy-to-assemble - Requires only 15-square-feet of floor space - Constructed of powder coated metal square tubing Rack Dimensions: 61-in. W x 36-in. D x 62-in. H

Units sold separately

Equipment Rental Rack Compact display rack solves your limited retail floor space issues. AW-9300-0029 (Display rack) 41-0485 (Pressure washer rental sign) 64-6044 (Industrial equipment pocket guides; 25-pack) 64-6057 (Acrylic literature holder) 64-6059 (Eraser) 64-6060 (Dry erase marker) AW-9300-0034 (Rack kit, includes 41-0485, 64-6044, 64-6057, 64-6059 & 64-6060) - Easy-to-assemble - Requires only 71â &#x201E;2-square-feet of floor space - Constructed of powder coated metal square tubing - Can hold up to 18 â&#x20AC;&#x201C; 1-gallon detergent bottles - Erasable area for half and full-day rental prices or purchase price - Includes literature holder for Mi-T-M pocket brochures Rack Dimensions: 27-in. W x 42-in. D x 40-in. H Detergent and unit sold separately

Units sold separately 30

Mi-T-M Corporation

800-553-9053

www.mitm.com

P R E S S U R E

W A S H E R

A C C ess o ries

Packaged Accessories & Racks Increase sales and brand recognition with the Mi-T-M packaged accessory program. Mi-T-M has a full line of accessories in full color packaging that are designed for use with the Replacement Parts Rack and the Replacement Parts Cabinet. Each part is clearly identified with its name, part number and which unit it is used on.

Fittings Add the ability to easily connect and disconnect your pressure washer wands and hoses. AW-0017-0001 ( 1⁄4 F x 1⁄4 socket) AW-0017-0002 ( 1⁄4 M x 1⁄4 plug) AW-0017-0004 ( 3⁄8 F x 3⁄8 socket) AW-0017-0005 ( 3⁄8 M x 3⁄8 plug) AW-0017-0006 ( 3⁄8 F x 3⁄8 plug) AW-0017-0028 ( 1⁄4 M x 1⁄4 socket) AW-0017-0029 ( 1⁄2 M x 3⁄8 socket) - Quick connect AW-0017-0002 AW-0017-0035 (M22 x 3⁄8 FNPT, 2-piece) - Screw connect AW-0023-0017 ( 3⁄8 M x 1⁄4 F adapter) AW-0023-0410 ( 3⁄8 M x 1⁄4 BSP-F adapter) AW-0024-0251 ( 3⁄8 M x 1⁄4 BSP-M adapter)

AW-0017-0035

O-rings O-rings ensure a tight fit and prevent leaks with quick connect sockets. AW-0025-0122 ( 3⁄8 -inch x 9⁄16-inch) AW-0025-0123 ( 1⁄2 -inch x 11⁄16-inch) - 10 per pack

Nozzles Quick connect nozzles give the user a choice of spray angles for precise cleaning power. Individual Nozzles - Available in 0°, 15°, 25° and 40° - Available in orifice size 3.0, 3.5, 4.0, 4.5, 5.0, 5.5, 6.0, 6.5 and 7.0 - Quick connect - Consult factory for nozzle size needed 3-Pack Nozzles - Sold in packs of three: 0°, 15°, 25° and 40° - Available in orifice size 3.0, 3.5, 4.0, 4.5, 5.0, 5.5, 6.0, 6.5 and 7.0 - Quick connect - Consult factory for nozzle size needed 4-Pack Nozzles - Sold in packs of four: 0°, 15°, 25° and 40° - Available in orifice size 3.0, 3.5, 4.0, 4.5, 5.0, 5.5, 6.0, 6.5 and 7.0 - Quick connect - Consult factory for nozzle size needed AW-0018-0148 (65° detergent nozzle) - Sold individually

Back view of accessory packaging

4-Pack Nozzle (0°, 15°, 25° and 40°)

Gun & Wand Replacement gun and wand for continued cleaning capability. AW-0016-0001 (Trigger gun, rated up to 5000-PSI) AW-0851-0096 (36-inch wand assembly, includes quick connect socket) AW-0016-0001 AW-0025-0122

Pressure Washer Replacement Parts Rack Customized to meet your customer needs. AW-9300-0001 - Increase profit margins - Header sign - Powder coated steel frame - Versatile peg and grid system keeps parts coordinated for easy access - Store your Mi-T-M pump oil on a powder coated steel tray - Convenient floor tray holds your Mi-T-M replacement hoses Rack Dimensions: 29.5-in. W x 24.5-in. D x 73-in. H

Pressure Washer Replacement Parts Cabinet Maximize your Mi-T-M pressure washer accessory sales with this industrial quality point-of-sale cabinet. AW-9300-0015 (Display cabinet) 20-0886A18 (Wand display holder) 852-0177 ('Time to Reorder' cards) - Durable powder coated steel frame - Custom locks keep merchandise safe and secure - Handy reorder cards assist with inventory management - Versatile peg and grid system keeps parts coordinated for easy access - Attached extension wand dividers keep inventory organized (not shown) - Convenient floor tray holds your Mi-T-M replacement hoses - Large enough to handle multiple quantities of inventory - Conveniently sized to occupy a modest amount of floor space Rack Dimensions: 29.75-in. W x 24.5-in. D x 65.25-in. H

Parts sold separately Parts sold separately www.mitm.com

800-553-9053

Mi-T-M Corporation

P R E S S U R E

W A S H E R

access o ries

Single-Axle Trailers

Mi-T-M offers several options for trailer mounted pressure washers for the ultimate in portable cleaning. Trailer units are fully integrated, selfcontained systems and are designed with a large water supply tank for working at remote sites where water is not accessible. The heavy-duty construction of the trailer and the axle suspension provides an easy ride ensuring the longevity of your equipment. Add a high quality Mi-T-M pressure washer and you are ready to deliver big power to get big jobs done quickly, wherever you need to work. AW-9000-0005 (With surge brakes and 200-gallon water tank) AW-9000-0006 (With electric brakes and 200-gallon water tank) AW-9000-0007 (With 200-gallon water tank only, no brakes) - 5-foot x 81⁄2-foot trailer - 3-inch x 41⁄4-inch angle frame - 3,500-lb. gross vehicle weight - (1) 3,500-lb. axle - (2) ST205-75R 15-inch radial tires with white spoke rims - (2) fenders - 2-inch coupler - Swivel jack with pad - Rubber mounted sealed lights - Tank is enclosed in a powder coated steel frame - Pressure washers sit on solid 1⁄4-inch steel base (will fit all Mi-T-M pressure washers) - Aluminum treadplate steps for access to water tanks Accessories for Single-Axle Trailers - Pressure washers - Hose reels AW-9000-0005 shown with HS-3505-1MGH hot water pressure washer and hose reels (available as accessories)

Trailer Options for Single & Dual-Axle Trailers High Pressure Hose Reel Options These high pressure hose reel options include the hose reel with jumper hose and mounting bracket. TX-0001 (13-inch reel) TX-0002 (16-inch reel)

Low Pressure Hose Reel Options These low pressure hose reel options include the hose reel with mounting bracket and plumbing. TX-0003 (16-inch reel) Note: 22-0136 back-flow preventor must be used with TX-0003, when used in California.

Replacement Hose Reel Parts When adding hose reels to the single or dual-axle trailers, use the following jumper hose and mounting bracket. 15-0159 (Jumper hose) 13-0179A01 (Mounting bracket) 50-0136 (13-inch reel, 100-foot maximum hose length) 50-0137 (16-inch reel, 200-foot maximum hose length)

Back-Flow Preventors These back-flow preventors are required on trailer units in some states. 22-0136 (Use if a trailer has a hose reel for the supply) - Mounted on inlet side of trailer - To be used with TX-0003 Low pressure hose reel option TX-0005 (Trailer tank bypass - for use on HS Series models) - To be used on dual-axle trailers only - Removes the float system, while adding the necessary plumbing - Water bypasses back to water tank TX-0007 (Trailer tank bypass - for use on HS Series models) - To be used on single-axle trailers only - Removes the float system, while adding the necessary plumbing - Water bypasses back to water tank

Due to advancements in technology, the design of Mi-T-M trailers may change after the publication of this catalog. 32

Mi-T-M Corporation

800-553-9053

www.mitm.com

P R E S S U R E

W A S H E R

A C C ess o ries

Dual-Axle Trailers

AW-9000-0003 (With surge brakes and (2) 200-gallon water tanks) AW-9000-0004 (With electric brakes and (2) 200-gallon water tanks) - 5-foot x 81⁄2-foot trailer - 3-inch x 41⁄4-inch angle frame - 7,000-lb. gross vehicle weight - (2) 3,500-lb. axles with brakes on both sides - (4) ST205-75R 15-inch radial tires with 6-bolt white spoke rims - (2) Tandem fenders - 25⁄16-inch coupler with 14,000-lb. capacity - Swivel jack with pad - Rubber mounted sealed lights - Tanks are enclosed in a powder coated steel frame - 5-foot x 4-foot x 12-inch storage area located under the water tanks, access doors are located at back of trailer - Pressure washers sit on solid 1⁄4-inch steel base (will fit all Mi-T-M pressure washers) - Aluminum treadplate steps for access to water tanks - (2) 200-gallon tanks are plumbed together Accessories for Dual-Axle Trailers - Pressure washers - Hose reels

Storage area located under the water tanks

Trailer is shown with HS-3505-1MGH hot water pressure washer and hose reels (available as accessories) AW-9000-0008 (With surge brakes and (1) 200-gallon water tank) - 5-foot x 81⁄2-foot trailer - 3-inch x 41⁄4-inch angle frame - 7,000-lb. gross vehicle weight - (2) 3,500-lb. axles with brakes on both sides - (4) ST205-75R 15-inch radial tires with 6-bolt white spoke rims - (2) Tandem fenders - 2-inch coupler with 14,000-lb. capacity - Swivel jack with pad - Rubber mounted sealed lights - Tank is enclosed in a powder coated steel frame - Pressure washers sit on solid 1⁄4-inch steel base (will fit all Mi-T-M pressure washers) - Aluminum treadplate steps for access to water tank Accessories for Dual-Axle Trailers - Pressure washers - Hose reels

AW-9000-0008 shown with HS-3006-0MDK hot water pressure washer and hose reel (available as accessories)

Due to advancements in technology, the design of Mi-T-M trailers may change after the publication of this catalog. www.mitm.com

800-553-9053

Mi-T-M Corporation

water

tra n sp o rt

trai l er

Dual-Axle Water Trailer The Mi-T-M dual-axle 510-gallon water trailer is perfect for controlling dust on jobsites and parking lots, heavy equipment cleaning, street cleaning, firefighting and a host of other applications. This tough trailer offers rear spray, fire and garden hose hook-ups and hydrant fill capabilities. Pair it with a 2-inch centrifugal pump featuring 118cc Honda OHV engine and it is ready to tackle any job requiring portable water.

MWT-0510-2MHD (Dual-axle trailer with 510-gallon water tank and 2-inch centrifugal pump) Trailer Tank - 510-gallon elliptical low profile 3⁄8-inch thick polyethylene - DOT approved - Trailer dimensions: 13'7" x 82" x 70" - 16-inch manhole with 4-inch vent and a sump drain - 12-inch underclearance at axle, no plumbing beneath - Lid is tethered the trailer deck Pump - (2) 3,500-lb. tandem axles with hydraulic surge brakes - 2-inch centrifugal pump featuring 118cc - (4) ST225-75 15-inch tires with white spoke rims Honda OHV engine with low oil shutdown - (2) fenders - Precision molded aluminum - 25⁄16-inch coupler with 7,000-lb. capacity Control Manifold - 7,000-lb. side-mount crank jack - Easy to operate butterfly brass valves - Dual leaf spring suspension Plumbing - Rubber mounted sealed lights - Dual rear spray heads - Wire storage basket - Garden hose connector - Two safety chains with snap hooks - Rear drain - 7,000-lb. gross vehicle weight - Manifold discharge system - Trailer weight: 1,580-lbs. empty/5,900-lbs. loaded - Water hammer prevention valve Warranties Bed - 5-foot x 8-foot frame

1 2 3 3 YEAR LIMITED

TRAILER WARRANTY

YEAR LIMITED

PU M P WARR A N T Y

Due to advancements in technology, the design of Mi-T-M trailers may change after the publication of this catalog. 34

Mi-T-M Corporation

800-553-9053

www.mitm.com

YEAR LIMITED

HONDA ENGINE WA R R A N T Y

YEAR LIMITED

WAT E R TA N K WA R R A N T Y

11⁄2-inch fire hose hook-up with 50-foot x 11⁄2-inch hose and fog nozzle

Break-away hydrant fill with 25-foot x 21⁄2-inch hose

Air Compressors

hiSTORY OF...

1999

Mi-T-M began manufacturing portable air compressors in 1999 as an extension of the existing industrial and contractor-grade equipment. Sixteen models were first introduced ranging from small electric hand carry 4-gallon models to gasoline models with a 20-gallon capacity. In 2000, seven more models were added to the line including large capacity 60 and 80-gallon models. Today, Mi-T-M manufactures over 30 models of air compressors giving customers a choice from electric or gasoline, singlestage or two-stage, and portable or stationary.

2000

2004

2011

2005 www.mitm.com

800-553-9053

Mi-T-M Corporation

a i r

c o m p r e ss o r s

Single Stage Gasoline

5-Gallon

Do it yourself jobs can seem daunting at first. For those who don't know where to begin, Mi-T-M's hand carry single stage 5-gallon air compressors make your jobs easier and more efficient by supplying you the extra power needed. Our gasoline models are perfect for remote jobsites.

AC1-HH04-05M

Compressor Pump - Quality single stage compressor - Oil lubricated aluminum crankcase - Aluminum head for heat dissipation - Cast iron cylinder - Stainless-steel braided discharge hose - Canister inlet air filter Engine - Honda OHV or Subaru OHC engine Frame - Compact and portable twin tank design - Powder coated steel frame and roll cage design - Double-handled carrying capability - 5-gallon powder coated tank assembly - Protective pump/motor housing - Rubber isolators Model Number AC1-HH04-05M AC1-HR45-05M ACCESSORIES Part Number 70-0357 70-0380

CFM @ PSI 4.4 @ 100 4.4 @ 100

AC1-HR45-05M

Components - Regulator and two gauges for tank and outlet pressure - Drain valves and pressure relief valves - Pneumatic throttle control - Start/stop control set at 95 to 125-PSI Warranties

1 3 3 YEAR LIMITED

COMPRESSOR P U M P WA R R A N T Y

Displacement/Engine 118cc Honda OHV 126cc Subaru OHC

800-553-9053

www.mitm.com

HONDA ENGINE WA R R A N T Y

Dimensions (LxWxH) Ship Wt. 21.5in.x17.5in.x21.75in. 87 lbs. 21.5in.x17.5in.x21.75in. 90 lbs.

Description Engine oil drain - 14-inch flexible drain hose to make oil changes cleaner and easier Engine oil drain - 14-inch flexible drain hose to make oil changes cleaner and easier

Mi-T-M Corporation

YEAR LIMITED

SUBARU ENGINE WA R R A N T Y

Net Wt. 79 lbs. 82 lbs. Fits Models AC1-HH04-05M AC1-HR45-05M

a i r

c o m p r e ss o r s

Single Stage Gasoline 8-Gallon

Designed for jobs which require a bit more power than standard tools can deliver, this Mi-T-M portable air compressor is ideal for light to moderate use. This gas driven model comes equipped with a 12-inch fly wheel for extra cooling and longer life and features convenient lifting handles for ease of use.

AM1-PH65-08M

Compressor Pump - Quality cast iron single stage compressor - Splash lubricated cast iron crankcase to extend the hours of performance - Cast iron head for heat dissipation - Stainless-steel braided discharge hose - Large canister intake filter Engine - Industrial Honda OHV or Subaru OHC engine - Pneumatic idle control to conserve fuel Frame - Powder coated 8-gallon twin tank receivers - 3â &#x201E;16-inch base plate to reduce vibration - 14-gauge powder coated two-piece belt guard with 1â &#x201E;4-turn release for quick access to belts - Convenient lifting handles - Pneumatic tire with tube and steel hub - Heavy-duty axle Model Number AM1-PH65-08M AM1-PR07-08M

CFM @ PSI Displacement/Engine 13.1 @ 100 196cc Honda OHV 13.1 @ 100 211cc Subaru OHC

2 3 3 YEAR LIMITED

YEAR LIMITED

PUMP EXCHANGE WA R R A N T Y

See page 51 for more information

Dimensions (LxWxH) 44.5in.x18.5in.x27in. 44.5in.x18.5in.x27in.

YEAR LIMITED

HONDA ENGINE WA R R A N T Y

SUBARU ENGINE WA R R A N T Y

Ship Wt. 200 lbs. 200 lbs.

Net Wt. 175 lbs. 175 lbs.

ACCESSORIES & OPTIONS Part Number Description 70-0357 Engine oil drain - 14-inch flexible drain hose to make oil changes cleaner and easier 70-0380 Engine oil drain - 14-inch flexible drain hose to make oil changes cleaner and easier AX-0003 Manual drain metal bowl - Drains moisture from air system Consult Factory Cable throttle control - Automatically throttles down engine to conserve fuel TX-1001-W Puncture-proof tire - Tire is flat-free, maintenance-free, 10-inch, white hub, one tire

Fits Models AM1-PH65-08M AM1-PR07-08M All models All models All models

www.mitm.com

800-553-9053

Mi-T-M Corporation

a i r

c o m p r e ss o r s

Single Stage Gasoline 20-Gallon

This gas driven, portable, single stage 20-gallon air compressor features a rugged handle and large tires that allows for greater portability and high quality performance for any task. The high-volume air capacity provides great productivity and flexibility on the jobsite.

Compressor Pump - Quality cast iron single stage compressor - Splash lubricated cast iron crankcase to extend the hours of performance - Cast iron head for heat dissipation - Stainless-steel braided discharge hose - Large canister intake filter Engine - Industrial Honda OHV or Subaru OHC engine - Pneumatic idle control to conserve fuel Frame - Powder coated ASME coded 20-gallon receiver tank - 3â &#x201E;16-inch base plate to reduce vibration - 14-gauge powder coated two-piece belt guard with 1â &#x201E;4-turn release for quick access to belts - Convenient lifting handle - Two pneumatic tires with tubes and steel hubs - Heavy-duty axle Model Number AM1-PH65-20M AM1-PR07-20M

CFM @ PSI Displacement/Engine 13.1 @ 100 196cc Honda OHV 13.1 @ 100 211cc Subaru OHC

AM1-PH65-20M Components - Regulator and two gauges for tank and outlet pressure - Manual drain valves for proper maintenance - Belt tightening system pulls engine straight to ensure constant belt alignment - 12-inch fly wheel for extra cooling and longer life - Quality pilot valve unloader Warranties

2 3 3 YEAR LIMITED

PUMP EXCHANGE WA R R A N T Y

See page 51 for more information

Dimensions (LxWxH) 37in.x23.5in.x33in. 37in.x23.5in.x33in.

YEAR LIMITED

HONDA ENGINE WA R R A N T Y

Ship Wt. 272 lbs. 272 lbs.

ACCESSORIES & OPTIONS Part Number Description 70-0357 Engine oil drain - 14-inch flexible drain hose to make oil changes cleaner and easier 70-0380 Engine oil drain - 14-inch flexible drain hose to make oil changes cleaner and easierr AX-0003 Manual drain metal bowl - Drains moisture from air system Consult Factory Cable throttle control - Automatically throttles down engine to conserve fuel TX-1002-W Puncture-proof tires - Tires are flat-free, maintenance-free, 10-inch, white hub, two tires

Mi-T-M Corporation

800-553-9053

www.mitm.com

YEAR LIMITED

SUBARU ENGINE WA R R A N T Y

Net Wt. 212 lbs. 212 lbs. Fits Models AM1-PH65-20M AM1-PR07-20M All models All models All models

a i r

c o m p r e ss o r s

Two Stage Gasoline 8-Gallon

Ideal for both contractors and remodelers this two stage air compressor provides a reliable air source on remote jobsites. This model allows for more air to be stored for future use while generating less heat which reduces wear and extends the life of the air compressor.

AM2-PR09-08M

Compressor Pump - Quality cast iron two stage compressor with venting system for reduced crankcase temperature and pressure - Splash lubricated cast iron crankcase to extend the hours of performance - Cast iron head and cylinder for extended durability - Stainless-steel braided discharge hose - Large canister intake filter Engine - Industrial Honda OHV or Subaru OHC engine - Pneumatic idle control to conserve fuel Frame - Powder coated 8-gallon twin tank receivers - 3â &#x201E;16-inch base plate to reduce vibration - 14-gauge powder coated two-piece belt guard with 1â &#x201E;4-turn release for quick access to belts - Convenient lifting handles - Two pneumatic tires with tubes and steel hubs - Heavy-duty axle Model Number AM2-PH09-08M AM2-PR09-08M OPTIONS Part Number AX-0003 AX-0015 AX-0041 Consult Factory TX-1002-W

CFM @ PSI Displacement/Engine 17.2 @ 175 270cc Honda OHV 17.2 @ 175 265cc Subaru OHC

2 3 3 YEAR LIMITED

YEAR LIMITED

PUMP EXCHANGE WA R R A N T Y

HONDA ENGINE WA R R A N T Y

Dimensions (LxWxH) 44in.x26in.x31in. 44in.x26in.x31in.

Ship Wt. 330 lbs. 330 lbs.

See page 51 for more information

YEAR LIMITED

SUBARU ENGINE WA R R A N T Y

Net Wt. 260 lbs. 260 lbs.

Description Manual drain metal bowl - Drains moisture from air system Electric start (battery and cables not included) - For easy starting Electric start (battery and cables not included) - For easy starting Cable throttle control - Automatically throttles down engine to conserve fuel Puncture-proof tires - Tires are flat-free, maintenance-free, 10-inch, white hub, two tires

www.mitm.com

Fits Models All models AM2-PH09-08M AM2-PR09-08M All models All models

800-553-9053

Mi-T-M Corporation

a i r

c o m p r e ss o r s

Two Stage Gasoline 20-Gallon

If you're in the market for power then this air compressor will meet all your needs. Strong and durable, quick and efficient, it is built of cast iron and stainless-steel and can store ample pressure with its powder coated ASME 20-gallon receiver tank. Portable or stationary, this unit will deliver.

AM2-PH09-20M All Models Feature Compressor Pump - Quality cast iron two stage compressor with venting system for reduced crankcase temperature and pressure - Splash lubricated cast iron crankcase to extend the hours of performance - Cast iron head for heat dissipation - Stainless-steel braided discharge hose - Large canister intake filter Engine - Industrial Honda OHV (Electric start optional) - Pneumatic idle control to conserve fuel - Engine oil drain Frame - Powder coated ASME coded 20-gallon receiver tank - 3â &#x201E;16-inch base plate to reduce vibration - 14-gauge powder coated two-piece belt guard with 1â &#x201E;4-turn release for quick access to belts

Components - Regulator and two gauges for tank and outlet pressure - Manual drain valves for proper maintenance - Belt tightening system pulls engine straight to ensure constant belt alignment - 16.5-inch fly wheel for extra cooling and longer life - Quality pilot valve unloader AM2-PH09-20M Model Additional Features Frame - Convenient lifting handles - Two pneumatic tires with tubes and steel hubs Warranties for All Models

2 3 3 YEAR LIMITED

PUMP EXCHANGE WA R R A N T Y

See page 51 for more information

PORTABLE MODEL

Model Number AM2-PH09-20M

AM2-SH09-20M shown with optional electric start (AX-0015)

YEAR LIMITED

HONDA ENGINE WA R R A N T Y

YEAR LIMITED

SUBARU ENGINE WA R R A N T Y

CFM @ PSI Displacement/Engine 17.2 @ 175 270cc Honda OHV

Dimensions (LxWxH) 46in.x26in.x39.5in.

Ship Wt. 356 lbs.

Net Wt. 306 lbs.

CFM @ PSI Displacement/Engine 17.2 @ 175 270cc Honda OHV

Dimensions (LxWxH) 37in.x18in.x38in.

Bolt Down (LxW) 23.193in.x11in.

STATIONARY MODEL

Model Number AM2-SH09-20M

ACCESSORIES & OPTIONS Part Number Description AW-0007-0196 Rear lifting handle (N/A for models with electric start options) - Allows unit to be lifted from both ends AX-0003 Manual drain metal bowl - Drains moisture from air system AX-0015 Electric start (battery and cables not included) - For easy starting AX-0017 Electric start (battery and cables included) - For easy starting Consult Factory Cable throttle control - Automatically throttles down engine to conserve fuel TX-1302-W Puncture-proof tires - Tires are flat-free, maintenance-free, 13-inch, white hub, two tires

Mi-T-M Corporation

800-553-9053

www.mitm.com

Ship Wt. 356 lbs.

Net Wt. 306 lbs. Fits Models AM2-PH09-20M All models AM2-SH09-20M All models All models AM2-PH09-20M

a i r

c o m p r e ss o r s

Two Stage Gasoline 30-Gallon & Base-Mount

Two stage air compressors provide a reliable air source in commercial, industrial and automotive applications. More efficient than their single stage counterparts, these models compress air to a higher pressure while generating less heat, reducing wear and extending compressor life. Choose either the 30-gallon tank mounted option or the base mount unit for easy installation.

ABS-13H-B ABS-14S-30H Compressor Pump - Quality cast iron two stage compressor with venting system for reduced crankcase temperature and pressure - Splash lubricated cast iron crankcase to extend the hours of performance - Cast iron head and cylinder for extended durability - Stainless-steel braided discharge hose - Oil level sight indicator Engine - Industrial Honda OHV or Subaru OHC engine (Electric start standard - battery and cables not included) - Pneumatic idle control to conserve fuel Frame - 3â &#x201E;16-inch base plate to reduce vibration - 14-gauge powder coated totally enclosed belt guard - Tabbed design offers flexible installation

Components - Regulator and two gauges for tank and outlet pressure - ASME safety valves - Belt tightening system pulls engine straight to ensure constant belt alignment - 16.5-inch fly wheel for extra cooling and longer life - Tank shut-off valve Tank-Mounted Models Additional Feature Frame - Powder coated ASME coded 30-gallon receiver tank Warranties for All Models

2 3 3 YEAR LIMITED

PUMP EXCHANGE WA R R A N T Y

See page 51 for more information

YEAR LIMITED

HONDA ENGINE WA R R A N T Y

YEAR LIMITED

SUBARU ENGINE WA R R A N T Y

TANK-MOUNTED MODELS

Model Number ABS-13H-30H ABS-14S-30H

CFM @ PSI Displacement/Engine 29.0 @ 175 389cc Honda OHV 29.0 @ 175 404cc Subaru OHC

Dimensions (LxWxH) 42in.x19in.x45in. 42in.x19in.x45in.

Bolt Down (LxW) Ship Wt. 23.75in.x13.5in. 460 lbs. 23.75in.x13.5in. 460 lbs.

Net Wt. 416 lbs. 416 lbs.

Dimensions (LxWxH) 36.5in.x19in.x28in. 36.5in.x19in.x28in.

Bolt Down (LxW) Ship Wt. 21in.x13.5in. 279 lbs. 21in.x13.5in. 279 lbs.

Net Wt. 215 lbs. 215 lbs.

BASE-MOUNTED MODELS

Model Number ABS-13H-B ABS-14S-B

CFM @ PSI Displacement/Engine 29.0 @ 175 389cc Honda OHV 29.0 @ 175 404cc Subaru OHC

ACCESSORY & OPTION Part Number Description 3-0304 Pump - Replacement pump IX-0001 Vibration pads - Isolators protect the unit from vibration during use

Fits Models All models Tank-mounted models

www.mitm.com

800-553-9053

Mi-T-M Corporation

a i r

c o m p r e ss o r s

Single Stage Electric 5-Gallon

The hand carry, 5-gallon electric air compressor makes your jobs easier and more efficient by supplying the extra air power needed. Simply plug it into the nearest outlet and go.

NEMA 5-15P, 15-amp plug

AC1-HE02-05M1

Compressor Pump - Quality single stage compressor - Oil lubricated aluminum crankcase - Aluminum head for heat dissipation - Cast iron cylinder - Stainless-steel braided discharge hose - Canister inlet air filter Motor - 120V single-phase 60-Hz. motor with 15-amp plug - Thermal motor overload protection Frame - Compact and portable twin tank design - Rubber handle for cushioned grip - 5-gallon powder coated tank assembly - Protective pump/motor housing - Rubber isolators Components - Regulator and two gauges for tank and outlet pressure - Drain valves and pressure relief valves - Quick connect fittings - Start/stop control set at 95 to 125-PSI Warranties

1 1 YEAR LIMITED

YEAR LIMITED

ELECTRIC MOTOR COM P R E S S O R WARRANTY PUMP WA R R A N T Y

Model Number AC1-HE02-05M1

CFM @ PSI 4.1 @ 100

Mi-T-M Corporation

HP/Motor 2.0 HP, 120V, 14.0A

800-553-9053

www.mitm.com

Plug Type NEMA 5-15P

Dimensions (LxWxH) Ship Wt. 20.5in.x15.5in.x17.5in. 65 lbs.

Net Wt. 56 lbs.

a i r

c o m p r e ss o r s

Single Stage Electric 8-Gallon

Designed and manufactured to the same stringent quality standards as all Mi-T-M equipment this air compressor offers maximum efficiency and flexibility. The industrial electric motor features an auto start/stop and a 10-inch fly wheel for extra cooling and longer life.

NEMA 5-15P, 15-amp plug

NEMA 5-20P, 20-amp plug

AM1-PE15-08M

Compressor Pump - Quality cast iron single stage compressor - Splash lubricated cast iron crankcase to extend the hours of performance - Cast iron head for heat dissipation - Stainless-steel braided discharge hose - Large canister intake filter Motor - Industrial-UL listed electric motor - Auto start/stop (continuous run optional) - Thermal overload motor protection Frame - Powder coated 8-gallon twin tank receivers - 3â &#x201E;16-inch base plate to reduce vibration - 14-gauge powder coated two-piece belt guard with 1â &#x201E;4-turn release for quick access to belts - Convenient lifting handles - Pneumatic tire with tube and steel hub Model Number AM1-PE15-08M AM1-PE02-08M OPTIONS Part Number AX-0002 AX-0003 AX-0005 TX-1001-W

CFM @ PSI 6.5 @ 100 8.4 @ 100

HP/Motor 1.5 HP, 120V, 13.2A 2.0 HP, 120V, 18.8A

Components - Regulator and two gauges for tank and outlet pressure - Manual drain valves for proper maintenance - Belt tightening system pulls motor straight to ensure constant belt alignment - 10-inch fly wheel for extra cooling and longer life - Industrial-grade pressure switch Warranties

1 2 YEAR LIMITED

YEAR LIMITED

ELECTRIC MOTOR WA R R A N T Y

PUMP EXCHANGE WA R R A N T Y

Plug Type NEMA 5-15P NEMA 5-20P

See page 51 for more information

Dimensions (LxWxH) 44.5in.x18.5in.x25in. 44.5in.x18.5in.x25in.

Ship Wt. 190 lbs. 190 lbs.

Net Wt. 170 lbs. 170 lbs.

Description Auto drain plastic bowl - Drains moisture from air system Manual drain metal bowl - Drains moisture from air system Dual control - Compressor can be operated in start/stop mode or continuous run where pilot valve exhausts air to atmosphere Puncture-proof tire - Tire is flat-free, maintenance-free, 10-inch, white hub, one tire

www.mitm.com

800-553-9053

Fits Models All models All models All models All models

Mi-T-M Corporation

a i r

c o m p r e ss o r s

Single Stage Electric 20-Gallon

Packed with features that let you take on more demanding jobs with more storing capacity, this electric model is the perfect solution for service shops. The quality cast iron compressor is efficient and reliable.

NEMA 5-15P, 15-amp plug

NEMA 5-20P, 20-amp plug

AM1-PE02-20M

Compressor Pump - Quality cast iron single stage compressor - Splash lubricated cast iron crankcase to extend the hours of performance - Cast iron head for heat dissipation - Stainless-steel braided discharge hose - Large canister intake filter Motor - Industrial-UL listed electric motor - Auto start/stop (continuous run optional) - Thermal overload motor protection Frame - Powder coated ASME coded 20-gallon receiver tank - 3â &#x201E;16-inch base plate to reduce vibration - 14-gauge powder coated two-piece belt guard with 1â &#x201E;4-turn release for quick access to belts - Convenient lifting handle - Two pneumatic tires with tubes and steel hubs Model Number AM1-PE15-20M AM1-PE02-20M OPTIONS Part Number AX-0002 AX-0003 AX-0008 TX-1002-W

CFM @ PSI 6.5 @ 100 8.4 @ 100

HP/Motor 1.5 HP, 120V, 13.2A 2.0 HP, 120V, 18.8A

1 2 YEAR LIMITED

YEAR LIMITED

ELECTRIC MOTOR WA R R A N T Y

PUMP EXCHANGE WA R R A N T Y

Plug Type NEMA 5-15P NEMA 5-20P

See page 51 for more information

Dimensions (LxWxH) 40in.x24in.x32in. 40in.x24in.x32in.

Ship Wt. 265 lbs. 260 lbs.

Net Wt. 196 lbs. 198 lbs.

Description Auto drain plastic bowl - Drains moisture from air system Manual drain metal bowl - Drains moisture from air system Dual control - Compressor can be operated in start/stop mode or continuous run where pilot valve exhausts air to atmosphere Puncture-proof tires - Tires are flat-free, maintenance-free, 10-inch, white hub, two tires

Mi-T-M Corporation

800-553-9053

www.mitm.com

Fits Models All models All models All models All models

a i r

c o m p r e ss o r s

Two Stage Electric 80-Gallon

Built in the highest quality possible, Mi-T-M air compressors are efficient and dependable. The 80-gallon vertical models take up less floor space than horizontal models. The large capacity storage tank offers longer run times and faster recovery for as long as you need them to do the job. Compressor Pump - Quality cast iron two stage compressor with venting system for reduced crankcase temperature and pressure - Splash lubricated cast iron crankcase to extend the hours of performance - Cast iron head and cylinder for extended durability - Stainless-steel braided discharge hose - Oil level sight indicator Motor - Low RPM industrial motor Frame - Powder coated ASME coded 80-gallon receiver tank - 3⁄16-inch base plate to reduce vibration - 14-gauge powder coated totally enclosed belt guard Components - ASME safety valves - Belt tightening system pulls motor straight to ensure constant belt alignment - 16.5-inch fly wheel for extra cooling and longer life - Intake filter/silencer - Tank shut-off valve Warranties

1 2 YEAR LIMITED

YEAR LIMITED

E L ECTRIC MOTOR WARRANTY

PUMP EXCHANGE WARRANTY

ACS-23105-80V

See page 51 for more information

Model Number AAS-23105-80V AAS-20305-80V AAS-23305-80V AAS-46305-80V ACS-23175-80V ACS-20375-80V ACS-23375-80V ACS-46375-80V

CFM @ PSI 17.8 @ 175 17.8 @ 175 17.8 @ 175 17.8 @ 175 23.2 @ 175 23.2 @ 175 23.2 @ 175 23.2 @ 175

HP/Motor 5.0 HP, 230V, 1Ø, 23.0A 5.0 HP, 200V, 3Ø, 16.1A 5.0 HP, 230V, 3Ø, 13.8A 5.0 HP, 460V, 3Ø, 6.9A 7.5 HP, 230V, 1Ø, 31.0A 7.5 HP, 200V, 3Ø, 23.0A 7.5 HP, 230V, 3Ø, 20.0A 7.5 HP, 460V, 3Ø, 10.0A

Dimensions (LxWxH) 33in.x25in.x73in. 33in.x25in.x73in. 33in.x25in.x73in. 33in.x25in.x73in. 33in.x25in.x73in. 33in.x25in.x73in. 33in.x25in.x73in. 33in.x25in.x73in.

Bolt Down (LxW) 15.63in.x15.63in. 15.63in.x15.63in. 15.63in.x15.63in. 15.63in.x15.63in. 15.63in.x15.63in. 15.63in.x15.63in. 15.63in.x15.63in. 15.63in.x15.63in.

Ship Wt. 570 lbs. 570 lbs. 570 lbs. 570 lbs. 665 lbs. 665 lbs. 665 lbs. 665 lbs.

Net Wt. 499 lbs. 499 lbs. 499 lbs. 499 lbs. 594 lbs. 594 lbs. 594 lbs. 594 lbs.

AAS Models Only

Note: Starter is not included with unit, must add starter option.

ACCESSORIES & OPTIONS Part Number Description 3-0298 Pump - Replacement pump 3-0312 Pump - Replacement pump IX-0001 Vibration pads - Isolators protect the unit from vibration during use IX-0002 Aftercooler - Removes up to 65% of the moisture from discharged compressor air IX-0008 Low-oil monitor - Low-oil sensor does not allow unit to start when oil levels fall below an adequate level IX-0009 Dual control - Compressor can be operated in start/stop mode or continuous run where pilot valve exhausts air to atmosphere IX-0013 IX-0014 IX-0015 IX-0016 IX-0017 IX-0018 IX-0019 IX-0020 IX-0029 IX-0032 IX-0053

Starter (5.0 HP) - For thermal overload protection Starter (5.0 HP) - For thermal overload protection Starter (5.0 HP) - For thermal overload protection Starter (5.0 HP) - For thermal overload protection Starter (7.5 HP) - For thermal overload protection Starter (7.5 HP) - For thermal overload protection Starter (7.5 HP) - For thermal overload protection Starter (7.5 HP) - For thermal overload protection Dual control - Compressor can be operated in start/stop mode or continuous run where pilot valve exhausts air to atmosphere Pneumatic drain - Drains liquid from compressor tank Hour meter - Displays number of hours unit has been in operation

www.mitm.com

800-553-9053

Fits Models AAS models ACS models All models All models ACS models All models except ACS-46375-80V AAS-23105-80V AAS-20305-80V AAS-23305-80V AAS-46305-80V ACS-23175-80V ACS-20375-80V ACS-23375-80V ACS-46375-80V ACS-46375-80V All models All models

Mi-T-M Corporation

a i r

c o m p r e ss o r s

Two Stage Electric 120-Gallon

Designed for the most demanding compressed air needs, this industrial-duty model is ideal for general compressed air needs, including machine shops, automotive repair facilities and general industrial applications. As a certified vessel testing facility, Mi-T-M manufactures the highest quality air Compressor Pump compressors in the industry. If you're looking for quality and power look for the Mi-T-M name. - Quality cast iron two stage compressor with venting system for reduced crankcase temperature and pressure - Splash lubricated cast iron crankcase to extend the hours of performance - Cast iron head and cylinder for extended durability - Stainless-steel braided discharge hose - Oil level sight indicator Motor - Low RPM industrial motor Frame - Powder coated ASME coded 120-gallon receiver tank - 3⁄16-inch base plate to reduce vibration - 14-gauge powder coated totally enclosed belt guard - Tabbed design offers flexible installation Components - ASME safety valves - Belt tightening system pulls motor straight to ensure constant belt alignment - Fly wheel for extra cooling and longer life (207⁄8-inch on ADS models, 243⁄4-inch on AES models) - Intake filter/silencer - Tank shut-off valve Warranties

1 2 YEAR LIMITED

YEAR LIMITED

ELECT R I C M O T O R WA R R A N T Y

PUMP EXCHANGE WARRANTY

AES-46315-120H

See page 51 for more information

Model Number ADS-23110-120H ADS-20310-120H ADS-23310-120H ADS-46310-120H AES-20315-120H AES-23315-120H AES-46315-120H

CFM @ PSI 34.2 @ 175 34.2 @ 175 34.2 @ 175 34.2 @ 175 46.5 @ 175 46.5 @ 175 46.5 @ 175

HP/Motor 10.0 HP, 230V, 1Ø, 39.0A 10.0 HP, 200V, 3Ø, 30.8A 10.0 HP, 230V, 3Ø, 26.8A 10.0 HP, 460V, 3Ø, 13.4A 15.0 HP, 200V, 3Ø, 44.0A 15.0 HP, 230V, 3Ø, 38.0A 15.0 HP, 460V, 3Ø, 19.0A

Dimensions (LxWxH) 74in.x26.5in.x58in. 74in.x26.5in.x58in. 74in.x26.5in.x58in. 74in.x26.5in.x58in. 74in.x26.5in.x58in. 74in.x26.5in.x58in. 74in.x26.5in.x58in.

Bolt Down (LxW) 34.5in.x23.5in. 34.5in.x23.5in. 34.5in.x23.5in. 34.5in.x23.5in. 34.5in.x23.5in. 34.5in.x23.5in. 34.5in.x23.5in.

Ship Wt. 904 lbs. 904 lbs. 904 lbs. 904 lbs. 995 lbs. 995 lbs. 995 lbs.

Net Wt. 785 lbs. 785 lbs. 785 lbs. 785 lbs. 876 lbs. 876 lbs. 876 lbs.

Note: Starter is not included with unit, must add starter option.

ACCESSORIES & OPTIONS Part Number Description 3-0313 Pump - Replacement pump 3-0314 Pump - Replacement pump IX-0001 Vibration pads - Isolators protect the unit from vibration during use IX-0003 Aftercooler - Removes up to 65% of the moisture from discharged compressor air IX-0004 Aftercooler - Removes up to 65% of the moisture from discharged compressor air IX-0006 Electric drain - Drains liquid from compressor tank IX-0011 Dual control - Compressor can be operated in start/stop mode or continuous run where pilot valve exhausts air to atmosphere IX-0012 Dual control - Compressor can be operated in start/stop mode or continuous run where pilot valve exhausts air to atmosphere IX-0021 Starter (10.0 HP) - For thermal overload protection IX-0022 Starter (10.0 HP) - For thermal overload protection IX-0023 Starter (10.0 HP) - For thermal overload protection IX-0024 Starter (10.0 HP) - For thermal overload protection IX-0025 Starter (15.0 HP) - For thermal overload protection IX-0026 Starter (15.0 HP) - For thermal overload protection IX-0027 Starter (15.0 HP) - For thermal overload protection IX-0030 Dual control - Compressor can be operated in start/stop mode or continuous run where pilot valve exhausts air to atmosphere IX-0031 Dual control - Compressor can be operated in start/stop mode or continuous run where pilot valve exhausts air to atmosphere IX-0032 Pneumatic drain - Drains liquid from compressor tank IX-0036 Low-oil monitor - Low-oil sensor does not allow unit to start when oil levels fall below an adequate level IX-0053 Hour meter - Displays number of hours unit has been in operation

Mi-T-M Corporation

800-553-9053

www.mitm.com

Fits Models ADS models AES models All models ADS models AES models All models ADS 200V & 230V models AES 200V & 230V models ADS-23110-120H ADS-20310-120H ADS-23310-120H ADS-46310-120H AES-20315-120H AES-23315-120H AES-46315-120H ADS-46310-120H AES-46315-120H All models All models All models

History of...

Air Compressor/Generators

2007

Mi-T-M introduced the combination air compressor/ generator series in 2007 as a compliment to the already established air compressor and generator product lines. This unique tool has been popular with contractors who appreciate the efficiency of one piece of equipment doing the work of two. The original models featured generators ranging from 1800 watts to 3500 watts with an 8-gallon air compressor on board. In 2010, 30-gallon models were added featuring a 4000 watt generator.

2008

2011

2009

2010 www.mitm.com

800-553-9053

Mi-T-M Corporation

a i r

c o m p r e s s o r / g e n e r at o r s

Single/Two Stage Gasoline

8-Gallon

Run your air tools and electric power tools off one convenient machine with the Mi-T-M air compressor/ generator combination. Now your shop air compressor can also act as a backup power source during times of power failure. The 8-gallon model with the industrial 1800 or 3500-watt generator comes in a portable version to take this versatile tool wherever the job takes you.

NEMA 5-15R

All Models Feature Compressor Pump - Quality cast iron single or two stage compressor - Splash lubricated cast iron crankcase to extend the hours of performance - Cast iron head for heat dissipation - Large canister intake filter - Durable stainless-steel braided discharge hose for longer life Engine - Honda OHV or Subaru OHC engine Generator - Industrial 1800 or 3500-watt generator with two NEMA 5-15R receptacles - Brushless alternator AG1-PH65-08M1 Frame - Powder coated 8-gallon twin tank receivers - 3â &#x201E;16-inch base plate to reduce vibration - 14-gauge powder coated two-piece belt guard with 1â &#x201E;4-turn release for quick Portable Model Additional Features Frame access to belts - Convenient lifting handles Components - Pneumatic tires with tubes and steel hubs - Belt tightening system pulls engine straight to ensure constant belt alignment Warranties on All Models - Regulator and two gauges for tank and outlet pressure - 12 or 16.5-inch fly wheel for extra cooling and longer life YEAR YEAR YEAR LIMITED LIMITED LIMITED - Manual drain valves for proper maintenance PUMP EXCHANGE HONDA ENGINE SUBARU ENGINE - Quality pilot valve unloader WA R R A N T Y WA R R A N T Y WA R R A N T Y

X G Y

NEMA L6-20R 20A 250V AX-0066 option

2 3 3

See page 51 for more information

SINGLE STAGE MODELS Alternator Wattage Model Number

CFM @ 100 PSI

CFM @ 125 PSI

Cont. with Cont. with Max. Output Comp. On-Load Comp. Off-Load Receptacles

AG1-PH65-08M1 AG1-PR07-08M1

11.6 11.6

10.9 10.9

1800 watts 600 watts 1800 watts 600 watts

1600 watts 1600 watts

Displacement/Engine Dimensions (LxWxH)

(2) NEMA 5-15R 196cc Honda OHV (2) NEMA 5-15R 211cc Subaru OHC

Ship Wt.

Net Wt.

44.5in.x26in.x27.5in. 257 lbs. 207 lbs. 44.5in.x26in.x27.5in. 257 lbs. 207 lbs.

TWO STAGE MODELS Alternator Wattage Model Number

CFM @ 100 PSI

AG2-PH13-08M1 16.3 AG2-SH13-08M1^ 16.3

CFM @ 175 PSI

Cont. with Cont. with Max. Output Comp. On-Load Comp. Off-Load Receptacles

15.7 15.7

3500 watts 2300 watts 3500 watts 2300 watts

3300 watts 3300 watts

Displacement/Engine Dimensions (LxWxH)

(2) NEMA 5-15R 389cc Honda OHV (2) NEMA 5-15R 389cc Honda OHV

52in.x30in.x36in. 45in.x22in.x36in.

Ship Wt.

^Stationary model.

ACCESSORIES & OPTIONS Part Number Description 70-0357 Engine oil drain - 14-inch flexible drain hose to make oil changes cleaner and easier 70-0358 Engine oil drain - 14-inch flexible drain hose to make oil changes cleaner and easier 70-0380 Engine oil drain - 14-inch flexible drain hose to make oil changes cleaner and easier 854-0093 Service truck mount kit (recommended for models that are mounted in service truck applications) - Includes four rubber isolators to reduce wear AX-0019 Electric start (battery and cables not included) - For easy starting AX-0028 Lifting hook - For easier portability AX-0066 230V outlet - Adds 230V outlet to model TX-1002-W Puncture-proof tires - Tires are flat-free, maintenance-free, 10-inch, white hub, two tires TX-1302-W Puncture-proof tires - Tires are flat-free, maintenance-free, 13-inch, white hub, two tires

Mi-T-M Corporation

800-553-9053

www.mitm.com

Net Wt.

430 lbs. 365 lbs. 425 lbs. 360 lbs.

Fits Models AG1-PH65-08M1 Two stage models AG1-PR07-08M1 AG2-SH13-08M1 Two stage models Two stage models Two stage models Single stage models AG2-PH13-08M1

a i r

c o m p r e s s o r / g e n e r at o r s

Two Stage Gasoline

Power this mighty unit with either a 389cc Honda or 404cc Subaru engine, include a cast iron two-stage compressor and an industrial 3500 or 4000-watt generator and you'll have enough electrical power and the ability to power air tools in your shop or in the most remote locations. The 30-gallon storage tank gives you enough air capacity for extra productivity. Whatever your needs, this all-in-one piece of equipment is well worth the investment.

30-Gallon

X G Y

NEMA 5-15R

NEMA L6-20R 20A 250V AX-0066 option

AX-0066 230V outlet option - adds 230V outlet to air compressor/ generator

Compressor Pump - Quality cast iron two stage compressor - Splash lubricated cast iron crankcase to extend the hours of performance - Cast iron head for heat dissipation - Large canister intake filter - Durable stainless-steel braided discharge hose for longer life Engine - Honda OHV or Subaru OHC engine Generator - Industrial 3500 or 4000-watt generator with four NEMA 5-15R receptacles - Brushless alternator Frame - Powder coated ASME coded 30-gallon receiver tank - 3â &#x201E;16-inch base plate to reduce vibration - 14-gauge powder coated two-piece belt guard with 1â &#x201E;4-turn release for quick access to belts

AG2-SR14-30M Components - Belt tightening system pulls engine straight to ensure constant belt alignment - Regulator and two gauges for tank and outlet pressure - 16.5-inch fly wheel for extra cooling and longer life - Manual drain valves for proper maintenance - Quality pilot valve unloader Warranties

2 3 3 YEAR LIMITED

PUMP EXCHANGE WA R R A N T Y

See page 51 for more information

YEAR LIMITED

HONDA ENGINE WA R R A N T Y

YEAR LIMITED

SUBARU ENGINE WA R R A N T Y

Alternator Wattage Model Number

AG2-SH13-30M AG2-SR14-30M

CFM @ 100 PSI

CFM @ 175 PSI

16.3 16.3

15.7 15.7

Max. Output

3500 watts 4000 watts

Cont. with Cont. with Comp. On-Load Comp. Off-Load

2300 watts 3000 watts

3300 watts 3500 watts

Receptacles

Displacement/Engine Dimensions (LxWxH) Ship Wt.

(4) NEMA 5-15R 389cc Honda OHV (4) NEMA 5-15R 404cc Subaru OHC

ACCESSORIES & OPTIONS Part Number Description 70-0358 Engine oil drain - 14-inch flexible drain hose to make oil changes cleaner and easier 70-0380 Engine oil drain - 14-inch flexible drain hose to make oil changes cleaner and easier 854-0093 Service truck mount kit (recommended for models that are mounted in service truck applications) - Includes four rubber isolators to reduce wear AX-0019 Electric start (battery and cables not included) - For easy starting AX-0062 Electric start (battery and cables not included) - For easy starting AX-0063 LIfting hook - For easier portability AX-0064 Electric start (battery box included) - For easy starting AX-0065 Electric start (battery box included) - For easy starting AX-0066 230V outlet - Adds 230V outlet to model

www.mitm.com

Net Wt.

40in.x24.5in.x45in. 500 lbs. 435 lbs. 40in.x24.5in.x45in. 500 lbs. 435 lbs.

800-553-9053

Fits Models AG2-SH13-30M AG2-SR14-30M All models AG2-SH13-30M AG2-SR14-30M All models AG2-SH13-30M AG2-SR14-30M All models

Mi-T-M Corporation

a i r

c o m p r e s s o r / g e n e r at o r s

Benefits

The benefits of a combination air compressor/generator: - Compressor/generators offer you double the convenience - you can operate air tools and at the same time power the lights in your work area. - Save money by purchasing one combination unit instead of an air compressor and generator separately. - Offers a relatively small footprint compared to owning two pieces of equipment. - Only one unit to maintain, therefore saving time and money on troubleshooting and parts. - Handy for remote locations where air and power are both required but not available. - Travels well. The stationary model can be mounted on the back of a service truck or work trailer, utilizing a minimum amount of space. - The 20-amp outlets on the large (AG2) models can run a small wire-feed welder. This is especially useful for farmers. - Particularly useful in the following industries/applications: - Agricultural - Construction - Auto service industry/Road-side assistance - Virtually any service truck that repairs equipment in the field, on the farm or construction site - Uses for a combination air compressor/generator: Air Compressor - Impact wrenches, grinders, drills and nailers - Shops - Air - Tires - Air - Sand blasters - Paint sprayers - Air/hydraulic pumps - Electric/hydraulic pumps - Air jacks - Grease pumps - Air tools

Mi-T-M Corporation

800-553-9053

www.mitm.com

Generator - Jobsites - Plants - Offices - Farms - Home - Mobile lights - Battery chargers - Fans - Electric/hydraulic pumps - Power tools - Saws, drills and grinders

a i r

c o m p r e s s o r s

Ai r

c o m p r e s s o r / g e n e r at o r s

Air Compressor Pumps

Best Pump Warranty In The Industry

The Mi-T-M Pump Exchange Program provides pump replacement for the Mi-T-M customer for the warranty period of two years from the date of purchase. If the air compressor pump fails due to a manufacturing defect during the two year warranty period, Mi-T-M will replace the pump at no charge. The air compressor should be returned to the Mi-T-M authorized dealer where it was purchased. The dealer will remove the pump and replace it with another single or two stage Mi-T-M pump at no charge. The Pump Exchange Program is not transferable and covers all pump problems with the exception of abuse or lack of basic general maintenance as stated in the owners manual and warranty statement.

No more pump-related maintenance costs!

Single Stage Cast Iron Compressor - - - - - - - - -

The sturdy cast iron crankcase is bi-supported for smooth running, longer bearing life and less maintenance. An oversized cast iron crankcase creates a large oil reservoir for reliable lubrication. Oversized ball-bearing style shaft bearings for smooth operation and longer life. Crankcase is vented to atmosphere through an exclusive labyrinth system, avoiding the presence of oil into the streamline. High profile fin design on cylinders optimizes heat dissipation. Reversible cylinder head allows discharge to right or left side of pump. Large stainless-steel valves offer less restriction to flow, giving greater volumetric efficiency, cooler running temperatures and longer valve life. Cast iron head for heat dissipation. Industrial-duty inlet filter/silencer for remarkably low sound levels.

Two Stage Cast Iron Compressor

Cast iron construction (excluding manifold) with all components precision CNC machined.

H G

1. The sturdy iron crankshaft is bi-supported for smooth running, longer bearing life and less maintenance. 2. An oversized cast iron crankcase creates a large oil reservoir for reliable lubrication. 3. Crankcase is vented to atmosphere. 4. Oversized ball-bearing style shaft bearings for smooth operation and longer life. 5. Venting system for reduced crankcase temperature and pressure. 6. High profile fin design on cylinders optimizes heat dissipation. 7. Large stainless-steel valves offer less restriction to flow, giving greater volumetric efficiency, cooler running temperatures and longer valve life. 8. Cast iron head for heat dissipation. - Oil sight glass for easy monitoring of the correct oil level. - Finned copper intercooler for heat dissipation.

E Low operating speed reduces wear and extends the life of all components.

C B Rugged pump design assures reliability and long maintenance intervals.

www.mitm.com

800-553-9053

Mi-T-M Corporation

a i r

c o m p r e s s o r s

Accessories

Ai r

c o m p r e s s o r / g e n e r at o r s

From fittings to drains, pumps to puncture-proof tires and everything in between, Mi-T-M is a one-stop shop for all your air compressor accessory needs.

Brass Fittings Barbed Hose Fittings Threaded end connects tools, fittings, couplers or plugs. Barbed hose fittings repair or assemble damaged or bulk hose. Corrosion-resistant brass construction. 23-0050 ( 3⁄8-male x 1⁄2-hose) 23-0051 ( 1⁄4-male x 1⁄4-hose) 23-0052 ( 3⁄8-male x 1⁄4-hose) 23-0069 ( 1⁄4-male x 3⁄8-hose) 23-0073 ( 3⁄8-male x 3⁄8-hose) 23-0069 Brass Couplings Use to combine two short hoses into one long hose. Corrosion-resistant brass construction. 23-0002 ( 1⁄4-inch FPT x 1⁄4-inch FPT) 23-0103 ( 1⁄4-inch MPT x 1⁄4-inch MPT) Barbed Hose Splicers Repair damaged hoses by combining hose sections together with our barbed hose splicers. Corrosion-resistant brass construction. 23-0415 (Fits 1⁄4-inch I.D. hose) 23-0416 (Fits 3⁄8-inch I.D. hose)

Air Chucks Use air chucks to help maintain proper tire pressure. AT-3001 (Dual foot - 1⁄4-inch FPT) AT-3002 (Ball foot - 1⁄4-inch FPT) AT-3003 (Deluxe air inflator with 12-inch hose; 12 to 120-PSI) AT-3001

AT-3003

AT-3002

Engine Oil Drain Kits 14-inch flexible drain hose makes oil changes cleaner and easier. 70-0357 (196cc Honda engines) 70-0358 (270cc & 389cc Honda engines) 70-0380 (126cc, 211cc, 265cc & 404cc Subaru engines)

Electric Compressor Drain Automatically drains filters, compressor tanks, drip legs, aftercoolers and receivers. AT-4012 ( 1⁄4-inch NPT connector) - Not for use on Air Compressor/Generator models

Steel Hex Nipples For when you have a female NPT thread and need a male NPT thread. Corrosion-resistant steel construction. 24-0010 ( 3⁄8-inch x 3⁄8-inch) 24-0024 ( 1⁄2-inch x 3⁄8-inch) 24-0031 ( 1⁄2-inch x 1⁄2-inch) 24-0145 ( 1⁄4-inch x 1⁄4-inch) 24-0146 ( 3⁄8-inch x 1⁄4-inch) 24-0265 ( 1⁄2-inch x 1⁄4-inch) 24-0146 24-0010

Coupler Test Bar Coupler test bar includes four 1⁄4-inch plugs: Tru-flate Automotive Style, Industrial Interchange Style, ARO Style and Lincoln Style. 17-4952

Gauges Use our gauges to monitor tank and outlet pressures. 22-0257 (200-PSI maximum rating) 22-0271 (300-PSI maximum rating) - 1⁄8-inch MPT

Air/Water Adapter Kit For filling tires with liquids. Connects a standard tractor valve to 3⁄4-inch garden hose bibb. Push-button bleeder valve releases trapped air. Two extra bushings included to fit standard air/water valves, new style fast flow valves, large bore valves and extensions, or standard valve stems. 23-0414 52

Mi-T-M Corporation

800-553-9053

www.mitm.com

Air Hoses/Leader Hose Air Hoses Ideal for most compressor lines and pneumatic tools. Non-conductive oil and abrasion resistant outer cover. 15-0230 (25-foot x 3⁄8-inch PVC) 15-0231 (25-foot x 3⁄8-inch PVC) - 1⁄4-inch NPT fittings 15-0232 (50-foot x 3⁄8-inch Rubber) 15-0233 (25-foot x 3⁄8-inch Rubber) - 1⁄4-inch NPT fittings - Bend restrictors 15-0230 Leader Hose Our leader hose attaches between the air hose and your tool, allowing for more flexibility and safety. 15-0229 (24-inch leader hose swivel) - Flexible hose 15-0229 - 360° swivel fitting

Blow Guns Our blow guns provide a leak-proof seal for blowing dirt and debris from lines with high pressure air. AT-3004 (Blow gun, standard rubber tip) AT-3005 (Blow gun, safety tip) AT-3004 AT-3007 (AT-3005 with 1-foot extension) AT-3008 (AT-3005 with 2-foot extension) AT-3009 (AT-3005 with 4-foot extension) AT-3005 AT-3008

a i r

c o m p r e s s o r s

Ai r

c o m p r e s s o r / g e n e r at o r s

Accessories

Plugs

Filters

Add the ability to easily connect and disconnect your air tools and air hoses. 17-0049 ( 1⁄4 MPT-1⁄4 Industrial Interchange Style) 17-0050 ( 1⁄4 MPT-1⁄4 Automotive Style) 17-0051 ( 1⁄4 MPT-1⁄4 Lincoln Style) 17-0052 ( 1⁄4 MPT-1⁄4 ARO Style) 17-0053 ( 1⁄4 FPT-1⁄4 Industrial Interchange Style) 17-0054 ( 1⁄4 FPT-1⁄4 Automotive Style) 17-0055 ( 1⁄4 FPT-1⁄4 Lincoln Style) 17-0056 ( 1⁄4 FPT-1⁄4 ARO Style) 17-0061 ( 3⁄8 MPT-3⁄8 Industrial Interchange Style) 17-0062 ( 3⁄8 FPT-3⁄8 Industrial Interchange Style) 17-0049 17-0053 23-0017 ( 3⁄8-inch to 1⁄4-inch reducer)

Our air compressor filters remove dirt, debris and water in air line. AT-4004-M ( 1⁄4-inch poly bowl) - Includes bowl guard and manual drain - 150-psig maximum supply pressure AT-4005-M ( 1⁄2-inch metal bowl) - Main line filter - Includes sight glass and manual drain - 250-psig maximum supply pressure AT-4006-M ( 3⁄8-inch poly bowl) - General purpose filter - Includes bowl guard and manual drain - 150-psig maximum supply pressure AT-4007-M (Disposable in-line filter) AT-4005-M - 1⁄4-inch MPT x 1⁄4-inch FPT - Desiccant, disposable filter and regulator in one compact unit AT-4008-M (Air tool filter) - 1⁄4-inch MPT x 1⁄4-inch FPT

Couplers Add the ability to easily connect and disconnect your air tools and air hoses. 17-0043 ( 1⁄4 MPT-1⁄4 Industrial Interchange Style) 17-0044 ( 1⁄4 MPT-1⁄4 Automotive Style) 17-0045 ( 1⁄4 FPT-1⁄4 Industrial Interchange Style) 17-0046 ( 1⁄4 FPT-1⁄4 Automotive Style) 17-0047 ( 1⁄4 FPT-1⁄4 Lincoln Style) 17-0048 ( 1⁄4 FPT-1⁄4 ARO Style) 17-0059 ( 3⁄8 MPT-3⁄8 Industrial Interchange Style) 17-0060 ( 3⁄8 FPT-3⁄8 Industrial Interchange Style) 17-0067 ( 3⁄8 FPT-1⁄4 Industrial Interchange Style) 17-0045 17-0043 17-0068 ( 3⁄8 MPT-1⁄4 Industrial Interchange Style)

Coupler/Plug Sets Add the ability to easily connect and disconnect your air tools and hoses. 17-0045K ( 1⁄4 FPT-1⁄4 Industrial Interchange Style coupler; 1⁄4 MPT-1⁄4 Industrial Interchange Style plug) 17-0046K ( 1⁄4 FPT-1⁄4 Automotive Style coupler; 1 ⁄4 MPT-1⁄4 Automotive Style plug) 17-0045K

Air Filter Elements Paper air filter replacement elements. The paper passes air through the filter with low restriction, but any dust or dirt in the air is deposited on the pleated outer surface of the element. 19-0218 (21⁄2-inch diameter x 3⁄8-inch M) - Replacement filter for 19-0217 19-0082 (31⁄4-inch diameter x 1⁄2-inch M) - Replacement filter for 19-0083 19-0220 (41⁄8-inch diameter x 1-inch M) - Replacement filter for 19-0219 & 19-0240 19-0226 19-0226 (6-inch diameter x 3⁄4-inch M) - Replacement filter for 19-0225

Regulators Regulators reduce and maintain pressure levels to safely operate air tools. 23-0326 - 1⁄4-inch inlet/outlet - 1⁄8-inch gauge port - 250-psig max. inlet/125-psig max. outlet 23-0231 - 3⁄8-inch inlet/outlet - 1⁄8-inch gauge port - 300-psig max. inlet/150-psig max. outlet 23-0358 - 1⁄2-inch inlet/outlet - 1⁄4-inch gauge port 23-0231 23-0326 - 300-psig max. inlet/250-psig max. outlet

Filter/Regulator Our combination air compressor filter/regulator removes dirt, debris and water in air line while reducing and maintaining pressure levels to safely operate air tools. AT-4011-M ( 3⁄8-inch filter/regulator) - Poly bowl with manual drain - 150-psig maximum supply pressure

In-Line Lubricators Ideal for air tool lubrication. AT-4009-M ( 1⁄4-inch poly bowl with bowl guard) AT-4010-M ( 3⁄8-inch poly bowl with bowl guard) - 150-psig maximum supply pressure

Air Filter Canisters Houses air filter elements 19-0215 (21⁄2-inch diameter x 3⁄8-inch M) - Plastic filter canister 19-0217 (21⁄2-inch diameter x 3⁄8-inch M) 19-0083 (31⁄4-inch diameter x 1⁄2-inch M) 19-0219 (41⁄8-inch diameter x 1-inch M) 19-0225 (6-inch diameter x 3⁄4-inch M) 19-0240 (41⁄8-inch diameter x 1⁄2-inch M) - Metal filter canister

AT-4008-M

19-0215 AT-4009-M www.mitm.com

800-553-9053

Mi-T-M Corporation

a i r

c o m p r e s s o r s

Accessories

Ai r

Replacement Pumps

c o m p r e s s o r / g e n e r at o r s

Two Stage Pumps Two stage replacement pump, cast iron with cast iron head. 3-0298 - Fits units up to 5.0-HP electric or 270cc gasoline 3-0304 - Fits units up to 389cc gasoline 3-0312 - Fits ACS Series units 3-0313 - Fits ADS Series units 3-0314 - Fits AES Series units

Single Stage Pumps Single stage replacement pump, cast iron with cast iron head. 3-0303 - Fits units up to 3.0-HP electric or 210cc gasoline 3-0315 - Fits units up to 2.0-HP electric

Building An Efficient Air System Compressed-air-powered equipment and machinery are critical elements in the productivity, efficiency and economy of today's industry. Quality air is the essential element for effective operation of this equipment. Water and dirt can cause major problems in compressed air lines. The use of filters that remove moisture and impurities from the air help high-speed pneumatic production lines operate more efficiently. Regulators and lubricators may also be added to control and lubricate downstream equipment. A quality air system can save time, money and keep equipment operating at maximum efficiency.

Air Compressor

Hot air leaves compressor, water vapor cools and liquefies as it goes downstream AT-4005-M - 1⁄2-inch NPT Main line filter with manual drain and metal bowl removes water and debris AT-4012-M - 1⁄4-inch NPT Electric compressor drain automatically drains liquid from tank

AT-4007-M In-line desiccant, disposable filter and regulator in one compact unit

AT-4006-M - 3⁄8-inch NPT General purpose filter with polycarbonate bowl and manual drain, removes water and debris

Paint Spraying Air Operated Tools

AT-4008-M Air tool filter removes dirt and debris AT-4010-M - 3⁄8-inch NPT Lubricator with polycarbonate bowl injects a fine stream of oil to lubricate air tools

Mi-T-M Corporation

800-553-9053

www.mitm.com

22-0231 Regulator reduces pressure to safe operating level for air tools

AT-4011-M - 3⁄8-inch NPT Filter/regulator with polycarbonate bowl and manual drain combines filter and rehulator into one compact unit

a i r

c o m p r e s s o r s

Ai r

c o m p r e s s o r / g e n e r at o r s

System Set-up & Air Estimating Guide Use galvanized pipe

Important Steps to an Air System Setup 1. Main-line filter and regulator should be installed at least 20-feet from the compressor. The air will cool down, allowing much of the water vapor to condense naturally for removal by filtration.

Goose neck all workstations

Drop a 6-inch pipe to drip leg

2. All line-drops (workstations) should be taken from the top of the main line. This prevents water from flowing into branch lines. 3. Galvanized pipe is recommended when building an air system. Follow illustration to the right when building a workstation drop.

Air Equipment Estimating Guide Always use free air (CFM) and pressure (PSI) specifications from the nameplate on the device or from the manufacturer. Free air figures (in the table below) are averages and may differ by specific brand.

INDUSTRIAL EQUIPMENT CFM REQUIREMENTS BASED ON NORMAL USAGE

Miscellaneous Portable Tools at 70 to 90 PSI Tools Drill, 1⁄6" to 3⁄8" Drill, 3⁄8" to 5⁄16" Screwdriver, #2 to #6 Screw Screwdriver, #6 to 5⁄16" Screw Tapper, to 3⁄8" Nutsetters, to 3⁄8" Nutsetters, to 3⁄4" Impact Wrench, 1⁄4" Impact Wrench, 3⁄8" Impact Wrench, 1⁄2" Impact Wrench, 3⁄4" Impact Wrench, 11⁄4" Die Grinder, Small Die Grinder, Medium Horizontal Grinder, 2" Horizontal Grinder, 4" Horizontal Grinder, 6" Horizontal Grinder, 8" Vertical Grinders and Sanders, 5" Pad Vertical Grinders and Sanders, 7" Pad Vertical Grinders and Sanders, 9" Pad Burring Tool, Small Burring Tool, Large Rammers, Small Rammers, Medium Rammers, Large Backfill Tamper Compression Riveter Nailers and Staplers Riveter Paint Spray Gun Scaling Hammer Chipping Hammer Riveting Hammer Circular Saw, 8" Circular Saw, 12" Lightweight Chain Saw Heavy-Duty Chain Saw

CFM 6.3 8.8 3.0 6.0 5.0 6.0 7.5 3.8 5.0 7.5 8.8 13.8 3.8 6.0 5.0 15.0 15.0 20.0 8.8 15.0 17.5 3.8 6.0 3.3 8.5 10.0 6.3 0.2 cu. ft. per cycle 5.0 to 8.0 6.0 5.0 3.0 7.5 7.5 11.3 16.3 7.0 21.8

AUTOMOTIVE EQUIPMENT CFM REQUIREMENTS BASED ON TOOLS BEING USED 25% OF THE TIME Portable Tools Air Filter Cleaner Body Polisher Body Sander, Orbital Brake Tester Carbon Remover Dusting Blow Gun Drill, 1⁄16" to 3⁄8" Impact Wrench, 3⁄8" Square Drive Impact Wrench, 1⁄2" Square Drive Impact Wrench, 3⁄4" Square Drive Impact Wrench, 1" Square Drive Die Grinder Vertical Disc Sanders Filing/Sawing Machine, Small Filing/Sawing Machine, Large Burring Tool Tire Rim Stripper Tire Changer Tire Inflation Line Tire Spreader Air Hammer Tire Hammer Bead Breaker Spring Oiler Spray Gun Engine Cleaner Production Paint Spray Gun Touch-Up Paint Spray Gun Undercoat Paint Spray Gun Grease Gun Hydraulic Lift Hydraulic Floor Jack Pneumatic Garage Door Radiator Tester Transmission/Differential Flusher Fender Hammer Medium-Duty Sander

Equipment PSI Range CFM 70 to 100 3.0 70 to 100 2.0 70 to 100 5.0 70 to 100 3.5 70 to 100 3.0 90 to 100 2.5 70 to 90 4.0 70 to 90 2.0 70 to 90 3.5 70 to 90 7.5 70 to 90 10.0 70 to 90 5.0 90 to 100 10.0 90 to 100 3.0 90 to 100 5.0 90 to 100 5.0 125 to 150 6.0 125 to 150 5.5 125 to 150 1.5 125 to 150 1.0 90 to 100 4.0 90 to 100 12.0 125 to 150 12.0 90 to 100 4.0 90 to 100 5.0 90 to 100 8.5 90 to 100 3.5 90 to 100 19.0 120 to 150 3.0 145 to 175 6.0 125 to 150 6.0 120 to 150 3.0 90 to 100 1.0 70 to 100 3.0 70 to 100 9.0 70 to 100 40.0

www.mitm.com

800-553-9053

Mi-T-M Corporation

Portable Generators

history of...

2005

Known for manufacturing high quality equipment and offering outstanding customer service in the industrial equipment industry, it wasnâ&#x20AC;&#x2122;t long before customers were approaching Mi-T-M asking them to add more equipment to its product line. As a result generators were introduced in the summer of 2005 with 18 models ranging from 1650 watts up to 13,000 watts. Today Mi-T-M manufactures a broad range of generators and introduced the powerful 14,000 watt generator in 2011.

2007

Januar y 2008

July 2008 56

Mi-T-M Corporation

800-553-9053

www.mitm.com

2011

P o r ta b l e

g e n e r at o r s

1700, 3200 & 4300-Watt Gasoline Inverters

Specifically designed to be quiet and powerful, Mi-T-M inverter generators are perfect to help power your RV and other recreational vehicles. It is the ultimate solution for clean, quiet and high-powered energy.

All Models Feature Inverter Technology - Reduces size, weight, noise and fuel consumption - Produces commercial quality AC power for sensitive electronic equipment Engine - Subaru engine with low-oil shutdown - Idle control Alternator - Brushless 120V alternator - Total harmonic distortion (THD) less than 3% Components - Special vibration control and low-tone mufflers further reduce noise - Battery charging - Fuel shut-off valve Miscellaneous - USDA/USFS-approved spark arrestors - Circuit breaker protected GEN-1700-iMS0 Model Additional Features Frame - Easy-grip frame design maximizes ease of handling Component - Unique soundproof panels reduce noise Warranties on All Models

2 3 YEAR LIMITED

A LTERNATOR WARRANTY

YEAR LIMITED

SUBARU ENGINE WARRANTY

Model Number Max. AC Output Rated AC Output Displacement/Engine Frequency/Voltage Max. Amps (120V) Cont. Amps (120V) Receptacles

GEN-1700-iMS0 1650 watts 1350 watts 86cc Subaru OHV 60Hz/120V 13.8 11.2 120V, 20 GFCI duplex

Main Circuit Breaker Rated Speed Decibel Rating Fuel Capacity Run Time (at full load) Dimensions (LxWxH) Ship Wt. Net Wt.

Electronic circuit protection 4200 RPM 59.0 1.1 gallons 3.5 hours 19.3in.x11.6in.x17.5in. 55 lbs. 45 lbs.

GEN-1700-iMS0

GEN-4300-iMS0 GEN-3200-iMS0 & GEN-4300-iMS0 Model Additional Features Engine - Electric start (battery not included) Components - Sound reducing materials are highly fire-resistant - Double-wall acoustical housing dampening panel and resin panel reduces both high and low frequency noise - Voltmeter/hour meter RV Application Advantage - Will run an air conditioner unit (15,000-BTU), refrigerator and microwave (GEN-3200)* - Will run an air conditioner unit (15,000-BTU), refrigerator and microwave plus interior lights (GEN-4300)* *Based on tests conducted on a 2005 5th-wheel camper. Test results are available. Individual test results could vary depending on condition and efficiency of appliance.

GEN-3200-iMS0 3200 watts 2800 watts 211cc Subaru OHC 60Hz/120V 26.7 23.3 120V, 20A GFCI duplex 120V, 30A twist lock Electronic circuit protection 3600 RPM 58.0 3.7 gallons 5.5 hours 21in.x18.9in.x22.9in. 143 lbs. 131 lbs.

GEN-4300-iMS0 4300 watts 3800 watts 265cc Subaru OHC 60Hz/120V 35.8 31.7 120V, 20A GFCI duplex 120V, 30A twist lock Electronic circuit protection 3600 RPM 62.0 4.2 gallons 5.6 hours 21in.x18.9in.x22.9in. 174 lbs. 162 lbs.

Models are compliant in 49 states. Cannot be sold in California.

NEMA L5-30R 125 VAC GFCI 5-20R

Inverter generator ratings represent no-load sound levels. Noise level tested at seven meters (75% load). Rating represents minimum noise level rating.

ACCESSORY Part Number 32-0915

Description RV generator adapter - 30A/125V female/male; use to connect RV cordsets to 30A generators

www.mitm.com

Fits Models GEN-3200 & GEN-4300

800-553-9053

Mi-T-M Corporation

p o r ta b l e

g e n e r at o r s

3200, 5500 & 7500-Watt Gasoline ChoreMaster Series 速

With commitment to quality and performance, Mi-T-M ChoreMaster 速 generators offer great power in a compact package. They provide maximum output under any given situation and are durable and reliable featuring the Mi-T-M OHV engine.

GFCI 5-20R

All Models Feature Engine NEMA L14-20R - Mi-T-M OHV engine with low-oil shutdown 125/250V GEN-3200-0MM0 - Recoil starting system Alternator - 100% copper windings NEMA L14-30R Frame 125/250V - Low profile, compact design - Heavy-duty wraparound frame with 1-inch powder coated steel tubing GEN-5500-0MM0 Components GEN-3200-0MM0 Model Additional Features - Easy-access and protected control panel with magnetic circuit Alternator breakers and GFCI-protected receptacles - Brushless 120V alternator - Large low-tone mufflers - Total harmonic distortion (THD) less than 6% - Fuel shut-off valve GEN-5500-0MM0 & GEN-7500-0MM0 Model Additional Features - Heavy-duty industrial air cleaners hold up under extreme conditions Alternator Miscellaneous - Brushless 120V/240V alternator - USDA/USFS-approved spark arrestors - Total harmonic distortion (THD) less than 5% - Circuit breaker protected Models are compliant Components Warranties in 49 states. - Fuel gauge YEAR YEAR LIMITED LIMITED Cannot be sold in - Fuel tanks are powder coated outside, ALTERNATOR Mi-T - M E N G I N E inside to prevent rusting zinc-plated California. WARRANTY WA R R A N T Y

1 2

Model Number Max. AC Output Rated AC Output Displacement/Engine Frequency/Voltage Max. Amps (120V/240V) Cont. Amps (120V/240V) Receptacles

GEN-3200-0MM0 3200 watts 2600 watts 208cc Mi-T-M OHV 60Hz/120V 26.7 21.7 120V, 20 GFCI duplex

Main Circuit Breakers

20A push-button

Rated Speed Fuel Capacity Run Time (at full load) Dimensions (LxWxH) Ship Wt. Net Wt.

3600 RPM 2.7 gallons 5.9 hours 25in.x18in.x18in. 140 lbs. 117 lbs.

ACCESSORIES Part Number AW-5090-0001 AW-5090-0002 AW-5740-0012 AW-5740-0013

GEN-5500-0MM0 5500 watts 4800 watts 291cc Mi-T-M OHV 60Hz/120V/240V 45.8/22.9 40.0/20.0 (2) 120V, 20A GFCI duplex 120V/240V, 20A twist lock (2) 20A toggle circuit breaker, single pole 20A toggle circuit breaker, double pole 3600 RPM 5.7 gallons 6.8 hours 27.5in.x19.75in.x22.5in. 186 lbs. 163 lbs.

Description Lifting hook - For easier portability, folds down and out of the way when not in use Lifting hook - For easier portability, folds down and out of the way when not in use Wheel kit - For easier portability, pneumatic tires with tubes, rubber gripped handles Wheel kit - For easier portability, pneumatic tires with tubes, rubber gripped handles

Mi-T-M Corporation

800-553-9053

www.mitm.com

GEN-7500-0MM0 7500 watts 6500 watts 414cc Mi-T-M OHV 60Hz/120V/240V 62.5/31.25 54.2/27.1 2) 120V, 20A GFCI duplex 120V/240V, 30A twist lock (2) 20A toggle circuit breaker, single pole 30A toggle circuit breaker, double pole 3600 RPM 7.3 gallons 6.9 hours 28in.x24.5in.x22.25in. 228 lbs. 203 lbs. Fits Models GEN-5500-0MM0 GEN-7500-0MM0 GEN-5500-0MM0 GEN-7500-0MM0

P o r ta b l e

g e n e r at o r s

3000, 4000 & 5000-Watt Gasoline This portable generator provides dependable power for homeowners seeking a reliable electrical backup yet is powerful enough for most industrial and contractor needs. It features a large low-tone muffler for quiet operation and a low profile compact design. All Models Feature Engine - Low-oil shutdown engine Alternator - Total harmonic distortion (THD) less than 5% - 100% copper windings Frame - Heavy-duty wraparound frame with 1-inch powder coated steel tubing - Low profile, compact design - Angled isolator design features four neoprene isolators Components - Large low-tone mufflers to reduce noise to lowest level possible - Easy-access and protected control panel with magnetic circuit breakers and GFCI-protected receptacles - Fuel shut-off valve - Heavy-duty industrial air cleaners hold up under extreme conditions Miscellaneous - USDA/USFS-approved spark arrestors - Circuit breaker protected GEN-3000-1MH0 Model Additional Features Alternator - Brushless 120V alternator Components - Large fuel tank capacity for extended run time GEN-4000 & GEN-5000 Model Additional Features Alternator - Brushless 120V/240V alternator Model Number Max. AC Output Rated AC Output Displacement/Engine Frequency/Voltage Max. Amps (120V/240V) Cont. Amps (120V/240V) Receptacles

GEN-3000-1MH0 3000 watts 2450 watts 163cc Honda OHV 60Hz/120V 25.0 20.4 120V, 20A GFCI duplex

Main Circuit Breakers

20A push-button

Rated Speed Decibel Rating Fuel Capacity Run Time (at full load) Dimensions (LxWxH) Ship Wt. Net Wt.

3600 RPM 74.8 2.6 gallons 7.4 hours 25in.x18in.x18in. 146 lbs. 130 lbs.

GFCI 5-20R

NEMA L14-20R 125/250V

NEMA L5-30R 125 VAC

GEN-5000-0MS0 Components - Easy-to-read fuel gauge - Full power switch - Fuel tanks are powder coated outside, zinc-plated inside to prevent rusting Warranties on All Models

2 3 3 YEAR LIMITED

A LT E R N AT O R WA R R A N T Y

YEAR LIMITED

HONDA ENGINE WA R R A N T Y

YEAR LIMITED

SUBARU ENGINE WA R R A N T Y

GEN-4000-0MH0 / GEN-4000-0MS0 4000 watts 3500 watts 242cc Honda OHV / 211cc Subaru OHC 60Hz/120V/240V 33.3/16.7 29.2/14.6 (2) 120V, 20 GFCI duplex 120V/240V, 20A twist lock 120V, 30A twist lock (2) 20A toggle circuit breaker, single pole 20A toggle circuit breaker, double pole 30A toggle circuit breaker, single pole 3600 RPM 75.7 / 74.0 5.7 gallons 9.3 hours 29in.x19.75in.x22.5in. 164 / 168 lbs. 142 / 146 lbs.

GEN-5000-0MS0 5000 watts 4400 watts 265cc Subaru OHC 60Hz/120V/240V 41.7/20.8 36.7/18.3 (2) 120V, 20 GFCI duplex 120V/240V, 20A twist lock 120V, 30A twist lock (2) 20A toggle circuit breaker, single pole 20A toggle circuit breaker, double pole 30A toggle circuit breaker, single pole 3600 RPM 73.8 5.7 gallons 6.8 hours 29in.x19.75in.x22.5in. 198 lbs. 176 lbs.

Noise level tested at seven meters (75% load). Rating represents minimum noise level rating.

ACCESSORIES & OPTIONS Part Number Description 32-0915 RV generator adapter - 30A/125V female/male; use to connect RV cordsets to 30A generators AW-5090-0003 Lifting hook - For easier portability, folds down and out of the way when not in use AW-5740-0009 Wheel kit - For easier portability, pneumatic tires with tubes, rubber gripped handles GX-0004 Hour meter - Displays number of hours the unit has been in operation TX-1002-W Puncture-proof tires - Tires are flat-free and maintenance-free, 10-inch, white hub, two tires

www.mitm.com

Fits Models 4000 & 5000-watt models 4000 & 5000-watt models 4000 & 5000-watt models 4000 & 5000-watt models 4000 & 5000-watt models

800-553-9053

Mi-T-M Corporation

p o r ta b l e

g e n e r at o r s

6000, 7500 & 8000-Watt Gasoline Built to work, you'll want this generator on every jobsite. Its heavy-duty full-wrap frame and impact resistant corners minimizes damage from rough handling. A performance-proven engine makes it reliable and efficient and because it's a Mi-T-M you'll enjoy using it for many years.

Engine - Low-oil shutdown engine - Electric start available (battery included) - Idle control Alternator - Brushless 120V/240V alternator - Total harmonic distortion (THD) less than 5% - 100% copper windings Frame - Heavy-duty wraparound frame with 1-inch powder coated steel tubing - Low profile, compact design - Angled isolator design features four neoprene isolators GEN-7500-0MHE featuring Components an electric start engine - Large low-tone mufflers to reduce noise to lowest level possible Miscellaneous - Easy-access and protected control panel with magnetic - USDA/USFS-approved spark arrestors circuit breakers and GFCI-protected receptacles - Circuit breaker protected - Fuel shut-off valve Warranties - Easy-to-read fuel gauge - Voltmeter/hour meter YEAR YEAR YEAR LIMITED LIMITED LIMITED - Fuel tanks are powder coated outside, zinc-plated inside to prevent rusting A LT E R N AT O R HONDA ENGINE SUBARU ENGINE - Heavy-duty industrial air cleaners hold up under extreme conditions WA R R A N T Y WA R R A N T Y WA R R A N T Y

GFCI 5-20R All Models

NEMA L14-20R 125/250V GEN-6000 Models

NEMA L14-30R NEMA L5-30R 125/250V 125 VAC GEN-7500 & GEN-7500 & 8000 Models 8000 Models

2 3 3

Model Number Max. AC Output Rated AC Output Displacement/Engine Frequency/Voltage Max. Amps (120V/240V) Cont. Amps (120V/240V) Receptacles Main Circuit Breakers Rated Speed Decibel Rating Fuel Capacity Run Time (at full load) Dimensions (LxWxH) Ship Wt. Net Wt.

GEN-6000-0MH0^ / GEN-6000-0MS0^ 6000 watts 5000 watts 389cc Honda OHV / 404cc Subaru OHC 60Hz/120V/240V 50.0/25.0 41.7/20.8 (2) 120V, 20A GFCI duplex 120V/240V, 20A twist lock 120V, 30A twist lock (2) 20A toggle circuit breaker, single pole (2) 20A toggle circuit breaker, double pole 30A toggle circuit breaker, single pole 3600 RPM 77.1 / 77.4 7.3 gallons 8.0 hours / 7.9 hours 29in.x24.4in.x22.5in. 232 lbs. 210 lbs.

GEN-7500-0MH0^ 7500 watts 6500 watts 389cc Honda OHV 60Hz/120V/240V 62.5/31.25 54.2/27.1 (2) 120V, 20A GFCI duplex 120V, 30A twist lock 120V/240V, 30A twist lock (2) 20A toggle circuit breaker, single pole 30A toggle circuit breaker, single pole 30A toggle circuit breaker, double pole 3600 RPM 80.0 7.3 gallons 6.9 hours 29in.x24.4in.x22.5in. 255 lbs. 233 lbs.

GEN-8000-0MS0^ 8000 watts 6900 watts 404cc Subaru OHC 60Hz/120V/240V 66.7/33.3 57.5/28.75 (2) 120V, 20A GFCI duplex 120V, 30A twist lock 120V/240V, 30A twist lock (2) 20A toggle circuit breaker, single pole 30A toggle circuit breaker, single pole 30A toggle circuit breaker, double pole 3600 RPM 78.2 7.3 gallons 6.9 hours 29in.x24.4in.x22.5in. 245 lbs. 223 lbs.

Noise level tested at seven meters (75% load). Rating represents minimum noise level rating. ^Available with electric start (battery included).

ACCESSORIES & OPTIONS Part Number Description 32-0915 RV generator adapter - 30A/125V female/male; use to connect RV cordsets to 30A generators AW-5090-0004 Lifting hook - For easier portability, folds down and out of the way when not in use AW-5740-0010 Wheel kit - For easier portability, pneumatic tires with tubes, rubber gripped handles TX-1002-W Puncture-proof tires - Tires are flat-free and maintenance-free, 10-inch, white hub, two tires

Mi-T-M Corporation

800-553-9053

www.mitm.com

Fits Models All models All models All models All models

P o r ta b l e

g e n e r at o r s

13,000 & 14,000-Watt Gasoline Designed for the contractor, this generator is built to withstand even the most demanding applications. With a reputation for performance it is a virtual powerhouse with the added benefit of being portable enough to easily move from jobsite to jobsite. Engine - Low-oil shutdown engine with electric start (battery included) - Idle control Alternator - Brushless 120V/240V alternator - Total harmonic distortion (THD) less than 5% - 100% copper windings Frame - Reinforced 11â &#x201E;4-inch powder coated steel tube frame with center balanced lifting hook - Solid steel threaded axles - Four pneumatic tires with tubes and locking tire brake Components - Large low-tone mufflers to reduce noise to lowest level possible - Easy-access and protected control panel with magnetic circuit breakers and GFCI-protected receptacles - Easy-to-read fuel gauge - Voltmeter/hour meter - Fuel tanks are powder coated outside, zinc-plated inside to prevent rusting - Heavy-duty industrial air cleaners hold up under extreme conditions Miscellaneous - USDA/USFS-approved spark arrestors - Circuit breaker protected Warranties

2 3 3 YEAR LIMITED

A LTERNATOR WARRANTY

SUBARU ENGINE WARRANTY

Model Number Max. AC Output Rated AC Output Displacement/Engine Frequency/Voltage Max. Amps (120V/240V) Cont. Amps (120V/240V) Receptacles

Main Circuit Breakers

Rated Speed Decibel Rating Fuel Capacity Run Time (at full load) Dimensions (LxWxH) Ship Wt. Net Wt.

GEN-14000-1MHE

YEAR LIMITED

HONDA ENGINE WARRANTY

New 14,000-Watt Model

GEN-13000-1MSE 13,000 watts 11,500 watts 650cc Subaru OHV 60Hz/120V/240V 108.3/54.2 95.8/47.9 (2) 120V, 20 GFCI duplex 120V, 30A twist lock 120V/240V, 30A twist lock 120V/240V, 50A (2) 20A toggle circuit breaker, single pole 30A toggle circuit breaker, single pole 30A toggle circuit breaker, double pole 50A toggle circuit breaker, double pole 3600 RPM 77.5 13.2 gallons 8.8 hours 31.5in.x30.5in.x37.5in. 573 lbs. 513 lbs.

GEN-14000-1MHE 14,000 watts 12,000 watts 688cc Honda OHV 60Hz/120V/240V 100.0/50.0 83.3/41.7 (2) 120V, 20 GFCI duplex 120V, 30A twist lock 120V/240V, 30A twist lock 120V/240V, 50A (2) 20A toggle circuit breaker, single pole 30A toggle circuit breaker, single pole 30A toggle circuit breaker, double pole 50A toggle circuit breaker, double pole 3600 RPM 77.5 13.2 gallons 8.0 hours 31.5in.x30.5in.x37.5in. 568 lbs. 508 lbs.

GFCI 5-20R

NEMA L14-30R 125/250V

NEMA 14-50R 50A

GFCI 5-20R

NEMA L5-30R 125 VAC

GX-0005 CS6369A 50A twist lock receptacle

Noise level tested at seven meters (75% load). Rating represents minimum noise level rating.

ACCESSORIES & OPTIONS Part Number Description 32-0915 RV generator adapter - 30A/125V female/male; use to connect RV cordsets to 30A generators GX-0003 Skid feet - For stationary applications GX-0005 50-amp twist lock receptacle - Marine receptacle for routine marine applications TX-1304-W Puncture-proof tires - Tires are flat-free and maintenance-free, 13-inch, white hub, four tires

www.mitm.com

Fits Models All models All models All models All models

800-553-9053

Mi-T-M Corporation

p o r ta b l e

g e n e r at o r s

6000-Watt Diesel A diesel generator from Mi-T-M is built with only the highest quality generator components including the powerful Yanmar engine. Known for their long life span, diesel generators typically have lower operating costs and run nearly smoke free. They have become a very popular choice on the jobsite.

Engine - Industrial Yanmar diesel engine - Electric start standard Alternator - Brushless 120V/240V alternator - Total harmonic distortion (THD) less than 5% - 100% copper windings Frame - Heavy-duty wraparound frame with 1-inch powder coated steel tubing - Low profile, compact design - Angled isolator design features six neoprene isolators Components - Exhaust system features an expansion silencer with cover - Easy-access and protected control panel with magnetic circuit breakers and GFCI-protected receptacles - Fuel shut-off valve - Easy-to-read fuel gauge - Voltmeter/hour meter - Fuel tanks are powder coated outside, zinc-plated inside to prevent rusting - Heavy-duty industrial air cleaners hold up under extreme conditions Miscellaneous - Circuit breaker protected Warranties

2 2 YEAR LIMITED

ALTER N AT O R WAR R A N T Y

YEAR LIMITED

YA NMAR ENGINE WARRANTY

Model Number Max. AC Output Rated AC Output Horsepower/Engine Frequency/Voltage Max. Amps (120V/240V) Cont. Amps (120V/240V) Receptacles Main Circuit Breakers Rated Speed Decibel Rating Fuel Capacity Run Time (at full load) Dimensions (LxWxH) Ship Wt. Net Wt.

GEN-6000-0MYE 6000 watts 5000 watts 9.2 HP Yanmar 60Hz/120V/240V 50.0/25.0 41.7/20.8 (2) 120V, 20A GFCI duplex 120V/240V, 20A twist lock 120V, 30A twist lock (2) 20A toggle circuit breaker, single pole (2) 20A toggle circuit breaker, double pole 30A toggle circuit breaker, single pole 3600 RPM 85.0 2.6 gallons 6.8 hours 30.125in.x21.62in.x22.5in. 295 lbs. 273 lbs.

GFCI 5-20R

NEMA L14-20R 125/250V

Noise level tested at seven meters (75% load). Rating represents minimum noise level rating.

ACCESSORIES & OPTIONS Part Number Description 32-0915 RV generator adapter - 30A/125V female/male; use to connect RV cordsets to 30A generators AW-5090-0007 Lifting hook - For easier portability, folds down and out of the way when not in use AW-5740-0006 Wheel kit - For easier portability, pneumatic tires with tubes, rubber gripped handles TX-1002-W Puncture-proof tires - Tires are flat-free and maintenance-free, 10-inch, white hub, two tires

Mi-T-M Corporation

800-553-9053

www.mitm.com

Fits Models GEN-6000-0MYE GEN-6000-0MYE GEN-6000-0MYE GEN-6000-0MYE

P o r ta b l e

g e n e r at o r s

Finding the Right Generator To select an engine-driven generator, you'll need to determine the power (kilowatt) requirements which must be met under operating conditions.

To determine kilowatts (kW), use the following formula: 1000 Watts = 1 Kilowatt (Ex. 1500 Watts/1000 Watts = 1.5 kW)

Charts 1, 2 and 3 will help you in selecting the proper size generator. With lights, heaters and small appliances, simply add the nameplate ratings or see Chart 1 for average wattage requirements. For portable electric tools and equipment, check Be sure the generator you select is large enough to handle your the nameplate rating or use Chart 2 for average requirements. If watts and/or amps are not given and only the horsepower is present requirements and anticipated needs. shown, use Chart 3 to determine the starting and running watts. To determine the right size generator, add up the total watts of all lights, appliances, tools or other equipment to be connected Chart 4 is furnished as a guide for selecting the proper size of insulated copper wire when extension cables are used. We to the generator. recommend the use of outdoor-rated (UL) cable, recognized type Check the nameplates to determine wattage. If wattage is not SJTW-A. shown, by amps and volts are given, the following simplified formula may be used: Amps x Volts = Watts (Ex. 12.5 Amps x 120 Volts = 1,500 Watts Undersizing the generator can be avoided by considering all of the loads that will be connected to the generator, and by determining the starting requirements (motor start) of electric motor-operated devices.

Chart 1: Home applications — approximate wattage requirements Equipment

Wattage

Air conditioner (10,000 BTU) Blanket, electric Broiler Clothes dryer, electric Coffee maker Dishwasher Fan, attic Fan, furnace Fan, window Freezer, food Heater, radiant Hot plate Refrigerator/freezer Sump pump Toaster TV, color Water heater Water pump

2000–3000 150 1400 5000–10,000 850 1500–2500 375 800–1200 200 300–500 1300 1250 600–2000 400–3000 1100–1700 100–350 3000–4500 1000–3000

Chart 2: Portable electric tools — approximate wattage requirements Equipment

Wattage

Equipment

Wattage

Blower, electric Compressors Concrete vibrators, 3⁄4-hp Concrete vibrators, 1-hp Concrete vibrators, 2-hp Concrete vibrators, 3-hp Drain cleaners Drills, 1⁄4-inch Drills, 3⁄8-inch Drills, 1⁄2-inch Drills, 1-inch Grinders, bench Grinders, portable Hammers, demolition Hammers, rotary Heaters, space Lights

⁄2–3 hp ⁄4–3 hp 840 1080 1560 2400 250 250–600 300–600 350–1200 1,000 1 ⁄4–1 hp 1000–2500 1260 1200 1 ⁄4–2 hp check wattage on bulb

Pump, electric Routers Sanders, belt Sanders, disc Sanders, orbital Saws, chain Saws, circular, 6-inch Saws, cutoff Saws, jig Saws, masonry Saws, radial arm Saws, table Screwdrivers Shears, metal-cutting Wrenches, impact, 1⁄2-inch Wrenches, impact, 3⁄4-inch Wrenches, impact, 1-inch

Chart 3: Motor starting requirements Watts Required To Start Motor Running Repulsion Split Motor (HP) Watts Induction Capacitor Phase 1/8 275 600 850 1200 1/6 275 600 850 2050 1/4 400 850 1050 2400 1/3 450 975 1350 2700 1/2 600 1300 1800 3600 3/4 850 1900 2600 – 1 1100 2500 3300 –

1 1

⁄2 hp and up 900–1100 600–1500 1200 250 800–1500 1000–2500 2500 200–800 2–5 hp 1–5 hp 1–3 hp 550 750 600 720 1200

Chart 4: Insulated copper wire size Load in Watts Current in Amps @ 120V @ 240V 2.5 300 600 5.0 600 1200 7.5 900 1800 10.0 1200 2400 15.0 1800 3600 20.0 2400 4800 25.0 3000 6000 30.0 3600 7200 35.0 4200 8400 40.0 4800 9600 45.0 5400 10,800 50.0 6000 12,000

#4 Wire – – – – 650 500 400 325 275 250 225 200

#6 Wire – – – 625 400 300 250 200 175 150 – –

#8 Wire – – – 400 265 200 150 125 100 – – –

www.mitm.com

#10 Wire 1000 500 330 250 165 125 100 – – – – –

#12 Wire 600 300 200 150 100 80 – – – – – –

800-553-9053

#14 Wire 375 200 125 100 50 – – – – – – –

#16 #18 Wire Wire 250 150 125 75 80 50 50 35 – – – – – – – – – – – – – – – –

Mi-T-M Corporation

p o r ta b l e

g e n e r at o r s

Accessories

Mi-T-M offers accessories to enhance every generator we build from lifting hooks to wheel kits, assuring that your generator will perform at its best.

Lifting Hooks For easier portability. AW-5090-0001 (Fits GEN-5500-0MM0) AW-5090-0002 (Fits GEN-7500-0MM0) AW-5090-0003 (Fits 4000 & 5000-watt models) AW-5090-0004 (Fits 6000 to 8000-watt gasoline models) AW-5090-0007 (Fits GEN-6000-0MYE) - Made with 1â &#x201E;4-inch powder coated steel - Bolts to generator with U-bolts - Folds down and out of the way when not in use

GEN-4000-0MH0 shown with optional lifting hook (AW-5090-0003)

Product Display Rack

Wheel Kit

Compact display rack solves your limited retail floor space issues. AW-9300-0013 (Display rack; includes header card, magnets and literature holder) AW-0013-0154 (Display shelves; 2 maximum) 13-0176A18 (Generator stop bracket; 4 maximum) - Easy-to-assemble - Requires only 15-square-feet of floor space - Constructed of powder coated metal square tubing Rack Dimensions: 61-in. W x 36-in. D x 62-in. H

For easier portability. AW-5740-0006 (Fits GEN-6000-0MYE) AW-5740-0009 (Fits 4000 & 5000-watt models) AW-5740-0010 (Fits 6000 to 8000-watt gasoline models) AW-5740-0012 (Fits GEN-5500-0MM0) AW-5740-0013 (Fits GEN-7500-0MM0) - Two 10-inch pneumatic tires with tubes - Dual rubber isolator feet - Powder coated and rubber gripped handles for comfort

GEN-7500-0MHE shown with optional wheel kit (AW-5740-0010)

RV Generator Adapter Uses the RV generator adapter to connect RV cordsets to 30A generators. 32-0915 - Fits generators 3200-watts or higher (Excluding GEN-3200-0MM0, GEN-5500-0MM0 & GEN-7500-0MM0 models) - 30A/125V female/male

Units sold separately 64

Mi-T-M Corporation

800-553-9053

www.mitm.com

Wet/Dry Vacuums

history of...

The Industrial Wet/Dry Vacuums were introduced into the Mi-T-M product line in 1999 with a 12-gallon and a 17-gallon model. Through customer feedback, the line was revised in 2002 to consist of slightly larger models 13-gallon and 18-gallon. In 2003 a 9-gallon model was added.

1999

2002

2011 2003

2009 www.mitm.com

800-553-9053

Mi-T-M Corporation

i n d u s t r i a l

9-Gallon

w e t / d r y

v a c u u m s

The Mi-T-M industrial vacuum is designed for performance, durability and filtration. The wet and dry filter means there is no need to change filters when the job calls for going from one to the other. This model features a self-cooling motor for motor-bearing longevity and the high impact poly construction canister is so rugged it carries a lifetime warranty.

Wet and dry filtern with no conversio necessary

MV-900-0MEV

Motor - Two stage blower motor for longer life - Self-cooling motor design Components - Exhaust air ducting reduces the possibility of motor contamination by dirt or moisture - Electrical system is double-protected - 25-foot electrical cord - Electrical cord wrap - Recessed wheels and clamps - Wet and dry filter (no conversion necessary) Construction - High impact poly construction canister with lifetime warranty on canister - Industrial-grade caster wheels with plates Miscellaneous - Quiet operation - Stackable design for easy storage - CSA certified Model Number MV-900-0MEV

YEAR

LIMITED WA R R A N T Y

LIFETIME CANISTER WA R R A N T Y

Excludes Normal Wear Items

Horsepower Water Decibel Dimensions Motor (cont.) CFM Waterlift Capacity Recovery Amps Rating* (LxWxH) Ship Wt. 120V Two stage bypass 1.3 101 87 in. 9.0 gallons 6.0 gallons 7.5 57.4 14in.x14in.x22in. 36 lbs.

*Most wet/dry vacuums have a decibel rating of 63.4 dB(a).

Accessories - each unit includes the following - 10-foot x 11⁄4-inch hose with inlet cuff - 141⁄4-inch curved plastic wand - 2-piece aluminum/plastic extension wand - 12-inch combination floor tool - 81⁄2-inch crevice tool - 12-inch commercial squeegee tool - Cartridge filter - 1 paper filter bag (replacement bags sold in packs of 5) Warranties

Mi-T-M Corporation

800-553-9053

www.mitm.com

Net Wt. 25 lbs.

i n d u s t r i a l

w e t / d r y

v a c u u m s

Accessories & Replacement Parts Standard Accessories

C D

P F

O N

I H 1. Electric cord wrap 2. Electrical system is double-protected 3. Two-stage blower motor for longer life 4. Stackable design for easy storage 5. Wet and dry cartridge filter (no conversion necessary) 6. 25-foot electrical cord 7. Disposable paper filter bag (for dry use only) 8. 141⁄4-inch curved plastic wand 9. 10-foot x 11⁄4-inch suction hose with inlet cuff

Replacement Accessories & Parts Suction Hoses & Fittings Suction Hose with Inlet Cuff 15-0241 - 10-foot x 11⁄4-inch hose with inlet cuff Suction Hose - Bulk 15-0242 - 11⁄4-inch hose without fittings - Sold by the foot Inlet Cuff 50-0178 - For bulk hose; to connect to vacuum

Filters Cartridge Filter 19-0221 - Hydrophobic media for wet and dry use Paper Filter Bag 19-0222 - 5 per pack - Disposable; for dry use only - Recommended for fine dusts

10. 81⁄2-inch crevice tool 11. Aluminum/plastic extension wand 12. 12-inch commercial squeegee tool 13. 12-inch combination floor tool 14. Industrial-grade recessed caster wheels with plates 15. High impact poly construction canister 16. Recessed clamps

Wands Aluminum/Plastic Extension Wand 16-0402 - 2-piece - Plastic wand with aluminum inserts Curved Plastic Wand 16-0403 - 141⁄4-inch - Connects hand tools to hose

Tools Commercial Squeegee Tool 33-0410 - 12-inch high impact plastic - Connects directly to extension wand Combination Floor Tool 33-0411 - 12-inch high impact plastic - Connects directly to extension wand

Crevice Tool 33-0412 - 81⁄2-inch high impact plastic - Connects directly to curved plastic wand Dusting Brush 33-0422 - 21⁄2-inch high nylon brush - Connects directly to curved plastic wand

33-0410

33-0411 33-0422

33-0412 www.mitm.com

800-553-9053

Mi-T-M Corporation

i n d u s t r i a l

w e t / d r y

13 & 18-Gallon

v a c u u m s

Easily the quietest in the industry, this high-performance industrial vacuum gives you the power to get the job done faster and more efficiently. Popular in the quick-lube industry, the Mi-T-M industrial vacuum is engineered for continuous duty. No filter conversion is necessary so you can go directly from a wet to dry clean-up. Designed for professional use, the poly construction canister carries a lifetime warranty.

y filter r d d n a t We version n o c o n h wit ry necessa

MV-1300-0MEV MV-1800-0MEV

Easily the quietest in the industry, the Mi-T-M industrial vacuum has a decibel rating as low as 51.2... compare that to other vacuums that are rated at 59 decibels or higher and you’ll hear the difference. Motor - Two stage blower motor for longer life - Self-cooling motor design Components - Exhaust air ducting reduces the possibility of motor contamination by dirt or moisture - Electrical system is double-protected - 25-foot electrical cord - Electrical cord wrap - Recessed wheels and clamps - Filter efficiency 99.5% to 1.0-micron (optional HEPA filter 99.7% to 0.3-micron) - Drain outlet - Wet and dry filter (no conversion necessary) Construction - High impact poly construction canister with lifetime canister warranty - Industrial-grade polyolefin wheels with stainless-steel shafts

Miscellaneous - Quiet operation - Stackable design for easy storage - Eliminates airborne particles through exhaust - CSA certified Accessories - each unit includes the following - 10-foot x 11⁄2-inch crushproof hose - 2-piece aluminum extension wand - 14-inch commercial squeegee tool - 12-inch combination floor tool - 103⁄4-inch crevice tool - 5-inch upholstery tool - Cartridge filter - 1 paper filter bag (replacement bags sold in packs of 10) Warranties

YEAR

LIMITED WA R R A N T Y

LIFETIME CANISTER WA R R A N T Y

Excludes Normal Wear Items

Model Number MV-1300-0MEV MV-1800-0MEV

Horsepower Motor (cont.) CFM Waterlift Capacity 120V Two stage bypass 1.3 115 93 in. 13.0 gallons 120V Two stage bypass 1.6 120 102 in. 18.0 gallons

*Most wet/dry vacuums have a decibel rating of 63.4 dB(a).

Mi-T-M Corporation

800-553-9053

www.mitm.com

Water Decibel Recovery Amps Rating* 9.0 gallons 6.9 51.2 13.0 gallons 8.3 51.5

Dimensions (LxWxH) Ship Wt. Net Wt. 22in.x18in.x28in. 50 lbs. 38 lbs. 27in.x19in.x31in. 55 lbs. 44 lbs.

i n d u s t r i a l

w e t / d r y

v a c u u m s

Standard & Optional Accessories Standard Accessories

R E

L I J

1. 2. 3. 4. 5. 6. 7. 8. 9.

10. 5-inch upholstery tool 11. 10-foot x 11⁄2-inch crushproof suction hose 12. 12-inch combination floor tool 13. 14-inch commercial squeegee tool 14. Industrial-grade recessed polyolefin wheels with stainless-steel shafts 15. Drain outlet 16. Recessed clamps 17. High impact poly construction canister

Hose Adapter Kit For when you need extra hose length. Extension Hose

Connects to unit

99.5% efficient to 1.0-micron - 1.0-micron rating prevents drywall dust from damaging motor - Eliminates airborne particles through exhaust

Connects to wand D.

Dry Pick-Up

Wet Pick-Up

+1.0 Micron

HEPA Filter How to attach the hose connection kit: A = Suction Hose (15-0223) sold per foot B = Tapered Cuff Eng (50-0167) C = Inlet Fittings (2 qty.) (50-0169) D = Hose Connector (1 qty.) (50-0168)

852-0156

Extension Hose

Designed for continuous water pick-up - Will not clog or deteriorate - Retains maximum air flow - Completely washable - Water resistant

Optional Parts & Accessories

19-0230

-1.0 Micron

25-foot electrical cord Electric cord wrap Electrical system is double-protected Two-stage blower motor for longer life Stackable design for easy storage Wet and dry cartridge filter (no conversion necessary) Disposable paper filter bag (for dry use only) 2-piece aluminum extension wand 10 3⁄4-inch crevice tool

Exclusive “Hydro” Flow Filter

Original Hose

High Efficiency Particulate Air 19-0234 Recommended for fine dust and clean room applications - Will not clog or deteriorate - Retains maximum air flow - Completely washable - Water resistant 99.7% efficient to 0.3-micron - 0.3-micron rating captures solid particulates, not allowing them back into the air

Wall Mount Bracket

25-Foot Hose Options VX-0001 Vacuum Accessories with Paper Bags This option includes 25-foot of 11⁄2-inch crushproof vacuum hose, 10 disposable paper filter bags (19-0610), crevice tool (33-0326) and suction hand tool (33-0371) VX-0002 Vacuum Accessories with Cloth Bag This option includes 25-foot of 11⁄2-inch crushproof vacuum hose, cloth filter bag (19-0611), crevice tool (33-0326) and suction hand tool (33-0371) VX-0003 Vacuum Accessories with Vacuum Bag Liner This option includes 25-foot of 11⁄2-inch crushproof vacuum hose, vacuum bag liner (19-0235), crevice tool (33-0326) and suction hand tool (33-0371)

MV-1300-0MEV & MV-1800-0MEV are shown with VX-0001 option

AW-9500-0000 Our wall mount bracket kit allows for a permanent work cleaning station. Save space by mounting vacuum to the wall.

{Note: These options will remove the 2-piece aluminum extension wand (16-0391), combination floor tool (33-0360), commercial squeegee floor tool (33-0359) and the upholstery tool (33-0327) that comes standard with the vacuum.}

www.mitm.com

800-553-9053

Mi-T-M Corporation

i n d u s t r i a l

w e t / d r y

v a c u u m s

Accessories & Replacement Parts Suction Hoses & Fittings

Filters

Suction Hose 15-0207 - 10-foot x 11⁄2-inch crushproof hose with fittings Suction Hose - Bulk 15-0223 - 11⁄2-inch crushproof hose without fittings - Sold by the foot Tapered Cuff End 50-0167 - Hose fitting - connects hose to wand or to hose connector Hose Connector 50-0167 50-0168 - Hose fitting - connects tapered cuff to hose extension Inlet Cuff Fitting 50-0169 - Hose fitting - connects hose to vacuum Hose Adapter Kit 852-0156 - Includes two inlet fittings and one hose connector 50-0169

Cartridge Filter 19-0230 - Hydrophobic media for wet and dry use - Completely washable - Filters to 1.0-micron High Efficiency Particulate Air (HEPA) Filter 19-0234 - 99.7% efficient to 0.3-micron - Recommended for fine dust and clean room applications

Filter Bags

50-0168

Aluminum Extension Wand 16-0391 - 2-piece; friction fit - Chrome-plated

Tools

Paper Filter Bag 19-0610 - 10 per pack - Disposable; for dry use only - Recommended for fine dusts Cloth Filter Bag 19-0611 - Reusable; for dry use only - Machine washable

Vacuum Bag Liner 19-0235 - Fits inside canister to keep filter cartridge clean (dry use only - do not use with paper filter bag)

Accessory Bag & Hose Hanger

Crevice Tool 33-0326 - 103⁄4-inch high impact plastic - Connects directly to hose Upholstery Tool 33-0327 - 5-inch width; serrated edge - High impact plastic - Connects directly to hose Dusting Tool 33-0328 - 23⁄4-inch nylon brush - High impact plastic - Connects directly to hose Commercial Squeegee Tool 33-0359 - 14-inch with replaceable rubber blades - High impact plastic - Connects directly to extension wand Replaceable Rubber Blades (not shown) 33-0397 (Front blade) 33-0398 (Back blade) - Fits commercial squeegee floor tool (33-0359)

Combination Floor Tool AW-9500-0001 33-0360 - Fits both 13 & 18-gallon vacuums - 12-inch with adjustable brush height - Vacuum hose hanger attaches to top handle - High impact plastic - Accessory bag holds two-piece wand assembly - Connects directly to extension wand and standard floor and hand tools Commercial Nylon Brush Floor Tool - Made from 600-denier vinyl-backed polyester 33-0361 - Easy to clean with soap and water - 14-inch with nylon brush insert - High impact plastic - Connects directly to extension wand Power Floor Tool 33-0362 33-0361 33-0359 - 103⁄4-inch, air powered, belt drive - High impact plastic - Connects directly to extension wand 33-0360 Suction Wand Tool 33-0364 - 4-inch high impact plastic - Connects directly to extension wand Suction Hand Tool 33-0371 33-0327 - 4-inch high impact plastic 33-0371 33-0328 - Connects directly to hose 33-0364

Mi-T-M Corporation

800-553-9053

www.mitm.com

33-0362

33-0326

Jobsite Boxes

history of...

Originally introduced as the Mi-T-Box in 2001, today Mi-T-M still manufactures the four same sizes but has since changed the series name to Jobsite Boxes. In 2003, the boxes went through a subtle color change and redesign to enhance the lifting handles to swing in for storage when not in use.

2001

2011

2003

www.mitm.com

800-553-9053

Mi-T-M Corporation

job s it e

bo x e s

Heavy-Duty Steel The Mi-T-M jobsite tool boxes are rugged enough for any construction site. The heavy-duty solid-steel construction offers added protection for your valuable tools and the special locking lid support locks the lid open for easy access. The special powder-coated finish offers extreme durability in the harshest of environments. Special tamperproof armored locking system for protection against break-ins

Convenient swing out handles for additional mobility

Special locking lid support locks the lid open to prevent accidental closings

MB-4822 shown with optional tool tray (MX-22)

Construction - Reinforced support skids for increased protection and easy transporting - Heavy-duty solid steel construction with full arc welded seams - Full-length concealed hinges are riveted for additional protection and strength - Special powder coated finish for extreme durability - Predrilled skids for easy caster installation - Optional removable tool trays to assist in tool management

Model Number MB-3619 MB-4822 MB-4830 MB-6024

Cubic Feet 6.33 13.44 25.00 21.66

Mi-T-M Corporation

Dimensions (LxWxH) 36in.x19in.x16in. 48in.x22in.x22in. 48in.x30in.x30in. 60in.x24in.x26in.

800-553-9053

Ship Wt. 83 lbs. 128 lbs. 174 lbs. 177 lbs.

www.mitm.com

Net Wt. 81 lbs. 123 lbs. 168 lbs. 168 lbs.

Padlocks not included. Mi-T-M recommends No. 5 padlocks.

job s it e

bo x e s

Accessories/Dimensions Casters

Tool Trays

When mobility is a must, casters are the solution. - Casters are industrial strength with ball bearing wheels that allow for smooth rolling over rough surfaces - Caster sets include two ridged and two swivels with locks MX-4 (4-inch) - Rated for 700 lbs. MX-5 (5-inch) MX-6 (6-inch) - Rated for 800 lbs.

Help sort and organize your jobsite boxes with tool trays. Tool trays increase your inside storage space. Offers a convenient transportable tray for jobs when you need only select tools. MX-19 - One tray fits MB-3619 - Dimensions: 16.5-in. L x 11-in. W x 3-in. H - 7.0 lbs. MX-22 - Two trays fits MB-4822 - Dimensions: 19.45-in. L x 11-in. W x 3-in. H - 9.0 lbs. MX-30 - Two trays fits MB-4830 - Dimensions: 27.5-in. L x 11-in. W x 3-in. H - 12.0 lbs. MX-24 - Two trays fits MB-6024 - Dimensions: 21.5-in. L x 11-in. W x 3-in. H - 8.0 lbs.

32.5

44.5

18.5

24.5

55.5

60.5

32.5

www.mitm.com

800-553-9053

Mi-T-M Corporation

Portable Heaters

history of...

Introduced in June 2009, the portable heaters are a natural extension of the Mi-T-M product line with models designed for commercial, industrial, agricultural and homeowner use. New models were added to the product line in the fall of 2010 including Direct and Indirect ductable portable heaters.

2009

2011

Fall 2010 74

Mi-T-M Corporation

800-553-9053

www.mitm.com

P o r ta b l e

h e at e r s

Kerosene Forced Air Our kerosene-fired forced air heaters are ideal for commercial, industrial and agricultural applications. Portable and easy to operate, it extends heat to a wide area creating a comfortable environment in the harshest conditions.

New 600,000 BTU Model

Important Notes - Not for use in residential living areas or inadequately ventilated areas - Proper ventilation required during operation - Must be plugged into an approved standard electrical outlet for operation

All Models Feature Frame - Rugged steel body - Extension cord wrap - Powder coated hood and fuel tank Motor - Heavy-duty, high quality cast aluminum enclosed electric motor Burner Head - Clamped hoses - Secured photo cell MH-0175-0M10 - 1-piece cast aluminum - Secured fully insulated ignition connection Components - High performance fan - Built-in temperature control thermostat with control dial (Digital temperature read out on 125 to 215,000 BTU models) 125,000 to 600,000 BTU Models Feature - Power switch Frame - Secured internal components - Powder coated steel handles for easy lifting - Integral overheat and flame-out safety - Roll cage design (MH-0600 model only) - Fuel gauge - Integrated fuel pressure gauge (Not available on MH-0400 model) - 10-inch pneumatic tires (13-inch tires on MH-0400 & MH-0600 models) - Oversized fuel cap - Spare parts storage system (located on back of unit) - High limit temperature shut-off - Fuel drain plug - Sure start ignition for cold temperature starts Component - Dual connector ignitor - Error indicator read-out Warranty

Factory tested for multiple fuels: Kerosene, JP8/Jet A fuel, No. 1 and No. 2 fuel oil and No. 1 and No. 2 diesel fuel

For use in workshops, warehouses, garages, construction sites and farms with proper ventilation.

YEAR

L IMITED WA RRANTY

Model Number Heat Output Hot-Air Flow Air Pump Pressure AC Power Motor Size Fuel Tank Capacity Fuel Consumption Max. Operating Hours Heating Area Multi-Fuel Capable Dimensions (LxWxH) Ship Wt. Net Wt.

MH-0600-0M10

MH-0070-0M10 70,000 BTU 240 CFM 4.0 PSI 120V, 60Hz, 1.5 Amp 1/8 HP 5.0 gallons .53 gal./hr. 9.0 hours 1,700 sq. ft. Yes 30in.x12in.x15in. 33 lbs. 28 lbs.

MH-0125-0M10 125,000 BTU 540 CFM 5.0 PSI 120V, 60Hz, 2.3 Amp 1/5 HP 10.0 gallons .95 gal./hr. 10.0 hours 3,100 sq. ft. Yes 39in.x23in.x26in. 60 lbs. 54 lbs.

MH-0175-0M10 175,000 BTU 630 CFM 7.5 PSI 120V, 60Hz, 2.7 Amp 1/4 HP 13.0 gallons 1.34 gal./hr. 9.5 hours 4,300 sq. ft. Yes 43in.x24in.x26in. 68 lbs. 61 lbs.

MH-0215-0M10 215,000 BTU 670 CFM 9.0 PSI 120V, 60Hz, 2.8 Amp 1/3 HP 13.0 gallons 1.63 gal./hr. 8.0 hours 5,300 sq. ft. Yes 43in.x24in.x26in. 71 lbs. 64 lbs.

MH-0400-0M10 400,000 BTU 1,400 CFM 125 PSI 120V, 60Hz, 2.8 Amp 1/2 HP 24.0 gallons 3.05 gal./hr. 8.0 hours 10,000 sq. ft. Yes 58in.x30in.x25in. 152 lbs. 143 lbs.

MH-0600-0M10 600,000 BTU 3,000 CFM 128 PSI 120V, 60Hz, 5.5 Amp 5/8 HP 40.0 gallons 4.5 gal./hr. 9.0 hours 15,000 sq. ft. Yes 75in.x34in.x43in. 320 lbs. 264 lbs.

Specifications subject to change without notice. Use in accordance with any and all state or local codes, regulations and/or ordinances. Please see heater "Owner's Manual" included with each heater for a complete list of important safety information. These specifications are estimates only.

www.mitm.com

800-553-9053

Mi-T-M Corporation

p o r ta b l e

h e at e r s

Propane Forced Air Our hand carry propane forced air heaters feature enclosed gas controls and heavy-duty steel construction. Ready to use - just connect to propane cylinder and plug-in. Important Notes - Not for use in residential living areas or inadequately ventilated areas - Proper ventilation required during operation - Must be plugged into an approved standard electrical outlet for operation

All Models Feature Frame - Heavy-duty steel construction - Easy-lift handle for portability at home or on the jobsite - Adjustable height angle (except on MH-0375 model) Heat Output - Variable BTUs (MH-0050-LM10 & MH-0150-LM10) Components - High performance fan - Automatic shut-off if power is interrupted or flame is extinguished - Enclosed gas controls - Electronic ignition - Propane inlet connector - connects heater to propane tank via a supply hose - 10-foot hose and regulator (Not available on MH-0150-NM10) - One touch ignition and heat control for easy operation MH-0050 Model Features Propane - Will operate on 20 lb. cylinder 150,000 to 375,000 BTU Models Feature Heat Output - Adjustable thermostat (MH-0150-LMT0, MH-0150-NM10 and MH-0375-LM10) Warranty on All Models

MH-0375-LM10

YEAR

LIMI T E D WARR A N T Y

For use in workshops, garages, construction sites and farms with proper ventilation. MH-0050-LM10 50,000 BTU 300 CFM 120V, 60Hz, Less than 1.0 Amp 1/10 HP Motor Size Propane Fuel 2.3 lbs./hr. Fuel Consumption 20 lbs. Required Cylinder Size Max. Operating Hours (per 11.0 hours required cylinder size) 1,000 sq. ft. Heating Area 18.1in.x7.7in.x12.8in. Dimensions (LxWxH) 19 lbs. Ship Wt. 15 lbs. Net Wt.

Model Number Heat Output Hot-Air Flow AC Power

MH-0150-LM10 120-135-150,000 BTU 400 CFM 120V, 60Hz, Less than 1.0 Amp 1/9 HP Propane 5.5/6.2/6.9 lbs./hr. 100 lbs. 18.0 hours

MH-0150-LMT0* 150,000 BTU 400 CFM 120V, 60Hz, Less than 1.0 Amp 1/9 HP Propane 6.9 lbs./hr. 100 lbs. 18 hours

MH-0150-NM10* 150,000 BTU 435 CFM 120V, 60Hz, Less than 1.0 Amp 1/9 HP Natural Gas 150 cu. ft./hr. N/A N/A

MH-0375-LM10* 375,000 BTU 1,500 CFM 120V, 60Hz, 1.45 Amp

3,800 sq. ft. 25.1in.x9in.x15.5in. 29 lbs. 23 lbs.

3,800 sq. ft. 25.1in.x9in.x15.5in. 35 lbs. 24 lbs.

9,000 sq. ft. 34in.x12.6in.x18.5in. 49 lbs. 41 lbs.

*Models include thermostat. Specifications subject to change without notice. Use in accordance with any and all state or local codes, regulations and/or ordinances. Please see heater "Owner's Manual" included with each heater for a complete list of important safety information. These specifications are estimates only.

Mi-T-M Corporation

800-553-9053

www.mitm.com

1/5 HP Propane 17.3 lbs./hr. (2) 100 lbs. 11.5 hours

P o r ta b l e

h e at e r s

Kerosene Indirect Ductable Job Site Series

Mi-T-M introduces the Job Site Series of indirect heaters. Designed for use in ventilated buildings and construction sites for drying and heating large areas.

New Series

All Models Feature Frame - Powder coated steel frame, handle and tank - Heavy-duty tires for easy mobility Burner - Stainless-steel combustion chamber - Direct spark ignition MH-0092 Additional Features Motor Components - Heavy-duty, high quality cast - Rotary pump compressor aluminum electric motor - Compact design Components - Thermostat plug - Safety switch prevents overheating MH-0125 & MH-0300 Additional Features - Thermostatically controlled Frame - Suitable for air ducting - Front foot brace - Easy to operate controls - Rugged steel body - High capacity fuel tank Components - Electronic flame control - High thermal efficiency - Automatic ignition - Control panel with thermostat plug, reset push button - Water resistant control box and safety air pressure switch - Automatic fuel shut-off - Heated fuel filter for more reliable starts in subzero temperatures Warranty on All Models - High pressure fuel pump - Vacuum sensor helps prevent heater lock out YEAR

MH-0300-0MIH

For use in construction sites and applications where the heat will be ducted into a building.

L IMITED WARRANTY

Model Number Heat Output Hot Air Flow AC Power Power Consumption Fan Static Pressure Fuel Tank Capacity Fuel Consumption Temperature Rise Max. Output Temperature Max. Operating Hours Duct Size (LxDiameter) Dimensions (LxWxH) Ship Wt. Net Wt.

MH-0092-0MIH 92,000 BTU 557 CFM 115V, 60Hz, 1Ø, 4.0 Amps 250 watts 0.5-inch WC 12.2-gallons 0.66 gal./hr. 120°F 240°F 18 hours 15-feet x 12-inch 36.6in.x22.1in.x24.6in. 93 lbs. 88 lbs.

MH-0125-0MIH 125,000 BTU 1,180 CFM 115V, 60Hz, 1Ø, 7.0 Amps 460 watts 0.7-inch WC 13.5-gallons 0.9 gal./hr. 130°F 240°F 15 hours 25-feet x 12-inch 54.8in.x27.6in.x32.7in. 162 lbs. 154 lbs.

MH-0300-0MIH 300,000 BTU 2,650 CFM 115V, 60Hz, 1Ø, 12.5 Amps 800 watts 0.8-inch WC 36.0-gallons 2.1 gal./hr. 130°F 240°F 17 hours 25-feet x 18-inch 68in.x29.5in.x40.4in. 290 lbs. 282 lbs.

Functions on: Kerosene or No. 1 and No. 2 fuel oil

ACCESSORIES Part Number 68-4001 68-4002 68-4003 68-4004 68-4005 68-4006 68-4007 68-4008 68-4056 68-4067

Description Thermostat control with 20-foot cord - For light party use Thermostat control with 20-foot cord - For use on a construction site Duct adapter - Connects ducting to heater Duct adapter - Connects ducting to heater Duct adapter - Connects ducting to heater 15-foot x 12-inch black flexible air ducting - Ducting directs heat 25-foot x 12-inch black flexible air ducting - Ducting directs heat 25-foot x 18-inch black flexible air ducting - Ducting directs heat Flue extension - Elevates rain cap Rain cap - Protects flue from moisture when unit is left outside

Fits Models All models All models MH-0092-0MIH MH-0125-0MIH MH-0300-0MIH MH-0092-0MIH MH-0125-0MIH MH-0300-0MIH All models All models

www.mitm.com

800-553-9053

Mi-T-M Corporation

P o r ta b l e

h e at e r s

Propane/Natural Gas Directional

Elite Series

Introducing the new Elite Series directional heaters. Available in propane and natural gas, these ductable heaters are great for large or small area applications and provide worry-free heating or air circulation for a wide range of applications.

New Series Outer Casing/Design - Rugged design - Durable powder coated outer casing and side lifting handles - Lifting handles for easy loading and unloading - The unit is naturally balanced to lift easily with handles - Two 10-inch solid rubber tires for mobility and easy placement Components - Thermostat control with 20-foot cord allows for a consistent, comfortable environment and use in remote locations - 15-foot hose and regulator assembly - Independent fan and burner controls for simple operation - Air flow safety devices Miscellaneous - Totally enclosed flame - MH-0355 is a dual-fuel heater - Fully enclosed electronics propane and natural gas - Electronic ignition Warranty - Operates as both a fresh air circulator or a heater at the touch of a switch YEAR - Super quiet, super efficient LIMITED WARRANTY - Easy to set-up - Numerous duct options available For use in tent and party applications or - Direct spark ignition construction sites.

Model Number Heat Output Hot Air Flow Fuel Electrical Requirements Amps (Starting/Cont.) Fuel Consumption Suggested Tank Size Inlet Gas Pressure Temp. Rise (above ambient) Dimensions (LxWxH) Ship Wt. Net Wt.

MH-0085-0MDH 85,000 BTU 750 CFM Propane 115V, 60Hz, 1Ø 8.2/2.3 amps 4.25 lbs./hr. 100 lbs. 11-inch WC 140°F 30in.x16in.x22in. 135 lbs. 122 lbs.

MH-0175-0MDH 175,000 BTU 1,200 CFM Propane 115V, 60Hz, 1Ø 8.4/3.6 Amps 8.75 lbs./hr. 100 lbs. 11-inch WC 140°F 30.62in.x18.25in.x31.12in. 193 lbs. 164 lbs.

MH-0355-0MDH*^ 355,000 BTU 2,450 CFM Propane / Natural Gas 115V, 60Hz, 1Ø 21/9 Amps 16.2 lbs./hr. / 350 cu. ft./hr. 200 lbs. 11-inch WC-propane / 8.5-inch WC-nat. gas 190°F-propane / 170°F-natural gas 46in.x32.5in.x42in. 350 lbs. 317 lbs.

MH-0175-0MDH Important Notes - Not for use in residential living areas or inadequately ventilated areas - Proper ventilation required during operation - Extremely hot during operation. Keep children, animals and all combustible objects away from heater.

MH-0355-CMDH*^# 320,000 BTU 2,450 CFM Propane / Natural Gas 115V, 60Hz, 1Ø 21/9 Amps 16.2 lbs./hr. / 350 cu. ft./hr. 200 lbs. 11-inch WC-propane / 8.5-inch WC-nat. gas 190°F-propane / 170°F-natural gas 46in.x32.5in.x42in. 350 lbs. 317 lbs.

*Heater is a dual-fuel model - uses propane or natural gas. #Model available in Canada only. ^Natural gas regulator is required to run heater on natural gas, for gas supply pressures between 1/2 and 5 lbs. of pressure (Part #68-5009). Available as an accessory. Specifications subject to change without notice. Use in accordance with any and all state or local codes, regulations and/or ordinances. Please see heater "Owner's Manual" included with each heater for a complete list of important safety information. These specifications are estimates only.

ACCESSORIES Part Number 68-5001 68-5002 68-5003 68-5004 68-5005 68-5006 68-5007 68-5008 68-5009 68-5010 68-5012

Description 12-inch duct adapter - Connects ducting to heater Duct diffuser - Distributes heat from ducting Heat diffuser - Distributes heat from unit Heat diffuser - Distributes heat from unit 12-foot x 12-inch white flexible air ducting - Ducting directs heat where you need it; requires 68-5001 12-foot x 18-inch white flexible air ducting - Ducting directs heat where you need it; requires 68-5007 18-inch duct adapter - Connects ducting to heater Thermostat kit (replacement only) - Adjusts temperature Natural gas regulator - For gas supply pressures between 1/2 and 5 lbs. of pressure Two cylinder manifold - Connects any two propane cylinders Duct diffuser - Distributes heat from ducting

Mi-T-M Corporation

800-553-9053

www.mitm.com

Fits Models MH-0085 & MH-0175 MH-0085 & MH-0175 MH-0175 MH-0085 MH-0085 & MH-0175 MH-0355 MH-0355 All models MH-0355 All models MH-0355

P o r ta b l e

h e at e r s

Gas-Fired Convection The industrial-duty propane or natural gas convection portable heaters heat quietly and efficiently. These heaters provide powerful instant heat with no electricity required.

All Models Feature Frame - Quick assembly 2-piece burn chamber - Durable steel housing - Inner windshield protects burner flame from being extinguished Heat Output - Variable heat settings - 360째 heat radius for even heating of room Components - Matchless piezo spark ignitor for easy lighting - Operates on a standard 100 lb. propane cylinder (Propane models only) - Automatic shut-off if flame is extinguished - 10-foot hose and regulator Warranty on All Models

YEAR

MH-0080-CM10

MH-0080 Additional Features Component - Single-handed controls for easy operation MH-0100 Additional Features Frame - Stainless-steel burner

MH-0200-CM10

For use in workshops, construction sites, farms and loading docks with proper ventilation.

L IMITED WA RRANTY

Model Number Heat Output Hot Air Flow Ignition Type Fuel Fuel Consumption Operating Time (100 lb. Cyl.)* Operating Time (40 lb. Cyl.)* Operating Time (20 lb. Cyl.)* Suggested Cylinder Size Inlet Gas Pressure Heating Area Dimensions (LxWxH) Ship Wt. Net Wt.

New Natu ra Gas Mode l l Av a i l a b l e

MH-0080-CM10 60-70-80,000 BTU N/A Automatic (integral) Propane 2.3 / 2.8 / 3.7 lbs./hr. L-43 / M-35 / H-27 hrs. L-17 / M-14 / H-11 hrs. L-8 / M-7 hrs. 100 lbs. N/A 1,800 sq. ft. 15.7in.x15.7in.x21.8in. 17 lbs. 12 lbs.

MH-0100-CM1N 50-70-100,000 BTU 400 CFM Control knob ignition Natural Gas 2.13 min. / 4.63 max. lbs./hr. N/A N/A N/A N/A 7-in. WC min. / 14-in. WC max. 3,000 sq. ft. 15.7in.x15.7in.x26.4in. 21 lbs. 14 lbs.

MH-0200-CM10 50-200,000 BTU N/A Push-button Propane 4.62 / 9.25 lbs./hr. L-43 / M-17 / H-10.5 hrs. N/A N/A 100 lbs. N/A 4,600 sq. ft. 16in.x16in.x26.4in. 20 lbs. 14 lbs.

Important Notes - Not for use in residential living areas or inadequately ventilated areas - Proper ventilation required during operation - Extremely hot during operation. Keep children, animals and all combustible objects away from heater.

*Operating times at Low, Medium and High Settings. Specifications subject to change without notice. Use in accordance with any and all state or local codes, regulations and/or ordinances. Please see heater "Owner's Manual" included with each heater for a complete list of important safety information. These specifications are estimates only.

www.mitm.com

800-553-9053

Mi-T-M Corporation

p o r ta b l e

h e at e r s

Kerosene Radiant Mi-T-M kerosene radiant portable heaters maximize radiant output for natural and soothing warmth. These portable heaters will keep you comfortable even with lower air temperatures. Easy access fuel filter

On/Off High/Low settings

Important Notes - Not for use in residential living areas or inadequately ventilated areas - Proper ventilation required during operation

MH-0125-1M1R

Motor - Fully enclosed motor for longer life Frame - Compact design - Two tires for easy mobility - Heat safety grille - Easy-lift handle for portability at home or on the jobsite Heat Output - Adjustable heat height - Clean, quiet, instant radiant heat

Components - Ultra quiet fuel pump - Power switch - Electronic controls - Error indicator light - Integral overheat and flame-out safety - Contractor-grade fuel cap Warranty

Factory tested for multiple fuels: Kerosene, JP8/Jet A fuel, No. 1 and No. 2 fuel oil and No. 1 and No. 2 diesel fuel

YEAR

LIMITED WARRANTY

For use in any outdoor application. Model Number Heat Output Heat Flow AC Power Fuel Tank Capacity Fuel Tank Consumption Max. Operating Hours Heating Area Dimensions (LxWxH) Ship Wt. Net Wt.

MH-0125-1M1R 95-125,000 BTU Radiant 120V, 60Hz, 3.15 to 5.0 Amps 11-gallons .9 gal./hr. - High / .71 gal./hr. - Low 12.2 hrs. - High / 15.5 hrs. - Low 3,125 sq. ft. 24.6in.x27.8in.x38.6in. 94 lbs. 80 lbs.

Mi-T-M Corporation

800-553-9053

www.mitm.com

Radiant Heat Output

P o r ta b l e

h e at e r s

Propane Tank-Top Radiant For convenient, versatile radiant heat, these propane tank-top heaters are great for outdoor use. Just connect to a standard 20 pound propane cylinder for up to 48 hours of heating.

MH-0015-IM10 Frame - Heavy-duty construction - Cast aluminum manifold - Rust-proof chrome emitter guard - Rear burner safety guard - Swivel burner head (MH-0030 only) Heat Output - Variable heat control valve - Clean, quiet, instant radiant heat

Components - Hand wheel connection for valve - Standard propane tank connection - Safety shut-off valve - High efficiency heat reflector - Heat regulator knob Warranty

MH-0030-IM10

*Propane tank not included

YEAR

LIMITED WA R R A N T Y

For use in open workshops, construction sites, farms and for any other outdoor heating need. Model Number Heat Output (Single Burner)* Heat Output (Double Burner)* Ignition Type Heat Settings Propane Cylinder Size Max. Operating Hours (20 lb. Cyl.)* Dimensions (LxWxH) Ship Wt. Net Wt.

MH-0015-IM10 L-9,000 / M-12,000 / H-15,000 BTU N/A Match light 3 20 lbs. L-48 / M-36 / H-28 hrs. 8.5in.x6.5in.x12.5in. 4 lbs. 3 lbs.

MH-0030-IM10 L-9,000 / M-12,000 / H-15,000 BTU L-18,000 / M-24,000 / H-30,000 BTU Match light 6 20 lbs. L-48 / M-18 / H-14 hrs. 17.5in.x6.5in.x18in. 8 lbs. 7 lbs.

Important Notes - Not for use in residential living areas or inadequately ventilated areas - Proper ventilation required during operation

*Heat output and operating hours are at Low, Medium and High Settings. Specifications subject to change without notice. Use in accordance with any and all state or local codes, regulations and/or ordinances. Please see heater "Owner's Manual" included with each heater for a complete list of important safety information. These specifications are estimates only.

www.mitm.com

800-553-9053

Mi-T-M Corporation

P o r ta b l e

h e at e r s

Propane Radiant Outdoor Patio Heater Just about every climate could use a Mi-T-M patio portable heater for cool evenings or chilly days. Sleek and attractive, this model provides up to a 210 square foot radius of heat on a patio or deck and is sure to keep your guests warm. Important Notes - Not for use in residential living areas or inadequately ventilated areas - Proper ventilation required during operation - Extremely hot during operation. Keep children, animals and all combustible objects away from heater.

Frame - Heavy-duty stainless-steel emitter screen - Stainless-steel finish - Rust resistant reflector material - 5-piece reflector assembly - Easy slide cylinder compartment cover - Large diameter support post - 18-inch base diameter Heat Output - Variable heat settings - 360-degree heat radius for even heating Components - Wind resistant burner system prevents flame from being extinguished, with automatic shut-off if flame is extinguished - Built-in safety tip-over switch - Hose and regulator standard - Single-handed ignition controls - Piezo spark push-button ignition Warranty

MH-0040-PM10

YEAR

LIM I T E D WARR A N T Y

For use on outdoor patios, decks and outdoor restaurants. Model Number Heat Output* Fuel Fuel Consumption Manifold Pressure Operating Time (20 lb. Cyl.) Suggested Cylinder Size Heating Area Dimensions (LxWxH) Ship Wt. Net Wt.

MH-0040-PM10 L-22,500 / H-40,000 BTU Propane 1.85 lbs./hr. 11-inch WC 10.8 hrs. 20 lbs. 210 sq. ft. 32.3in.x32.3in.x88in. 68 lbs. 59 lbs.

*Heat output is at Low and High Settings. Specifications subject to change without notice. Use in accordance with any and all state or local codes, regulations and/or ordinances. Please see heater "Owner's Manual" included with each heater for a complete list of important safety information. These specifications are estimates only.

ACCESSORIES Part Number AW-9700-0001

MH-0040-PM10 shown with optional wheel kit (AW-9700-0001)

Description Wheel kit - Attaches to bottom of heater base, allowing for easy portability, powder coated steel material

Mi-T-M Corporation

800-553-9053

www.mitm.com

Fits Model MH-0040-PM10

p o r ta b l e

h e at e r s

How To Choose Can Mi-T-M heaters be used indoors? Fuel burning portable heaters are intended to be used in a well ventilated area. Please refer to your operatorâ&#x20AC;&#x2122;s manual for the fresh air requirements.

How do I size a portable heater? The most important factor when sizing a portable heater is the amount of space you have to heat. A general rule of thumb is that you can heat approximately 25 square feet for every 1000 BTUs a heater puts out. What type of heater is better, one that runs on Fuel Oil or LP? All of the approved fuels for Mi-T-M portable heaters have great energy value and one doesnâ&#x20AC;&#x2122;t stand out over another. Your application and the fuel that you have available are going to determine which fuel to use.

What types of fuels are approved for Oil Fired Mi-T-M portable geaters? The approved fuels are: No. 1 and No. 2 fuel oil No. 1 and No. 2 diesel fuel JP8/Jet A fuel

Do all portable heaters require electricity? Mi-T-M portable heaters that have a blower motor or a fuel pump will require electricity to power them. All Kerosene forced air, LP & Natural Gas forced air and radiant heaters require electricity. The convection, outdoor patio heater and the tank top heaters do not require electricity.

www.mitm.com

800-553-9053

Mi-T-M Corporation

Safety & Product Certifications Mi-T-M builds safe, reliable products. In the United States, the UL, CSA International and ETL are accredited by the Occupational Health and Safety Administration (OSHA), as a Nationally Recognized Testing Laboratory (NRTL). Generally speaking, all OSHA accredited laboratories conduct their tests against the same set of US standards and codes, regardless of who authors or publishes them. Having undergone detailed scrutiny of our technical competence, integrity and certification testing facility, Mi-T-M is authorized by CSA to perform much of the product certification work in-house with NRTL audits to guarantee credibility. The mark of CSA, ETL or UL on a Mi-T-M product is an added assurance of safety. CSA Group - the Canadian Standards Association - for standards development, information products, sale of publications, training and membership services. CSA International - for product testing and certification; also test to applicable US standards, which include ANSI, UL, CSA, NSF and others. QMI - for management systems registration. CSA marks appear on over one million products worldwide. Intertek's ETL Semko division has been the global leader in the testing, inspection and certification of products for over 100 years, dating back to Thomas Edison's Electrical Testing Laboratories (ETL). The ETL listed mark is the legal equivalent of the UL-listed and CSA-listed marks, designated by OSHA and the Standards Council of Canada. When Mi-T-M products bear Intertek's proprietary ETL-listed mark, the letters ETL will carry with them a long history of innovation, influence and independence. UL, "Underwriters Laboratories Inc.", the trusted source across the globe for product compliance. UL has tested products for public safety for more than a century. UL offers one of the conformity assessment industry's broadest portfolios of capabilities and certification marks. Their unique mix of local expertise in global markets and deep industry knowledge helps bring safer products to market. red To C factu lea nu ni Ma n

ment uip Eq

Trade A

ss o

ci a

rmance Sta nd erfo ar nP d tio

Cleaning Equipment Trade Association

Performance Certified s

Mi-T-M Corporation's pressure washers have received certification from CETA under the CETA Performance Certification Standard. This standard clearly defines performance criteria and test procedures for certification of hot and cold water pressure washers. CETA certification guarantees the buyer that products are designed, built and tested to rigid performance standards. Machines must operate within +/-5% of advertised performance rating. Data for all Performance Certified models are on file at CETA headquarters, and periodic peer reviews ensure constant quality. The International Boiler and Pressure Vessel Code establishes rules of safety governing the design, fabrication and inspection of boilers and pressure vessels, and nuclear power plant components during construction. In the formulation of its rules and in the establishment of maximum design and operating pressures, the Committee considers technological advances including materials, construction, methods of fabrication, inspection, certification and overpressure protection. The objective of the rules is to provide a margin of deterioration in service. Advancements in design and material and the evidence of experience are constantly being added by Addenda. Originating in 1914, the ASME Boiler and Pressure Vessel Code is now adopted in part or in its entirety, by 49 states and numerous municipalities and territories of the United States and all the provinces of Canada. CSA International is the principal product testing, certification and standards development organization serving the gas industry in the US and Canada. They are the number one source for gas product approvals in North America and the only organization that issues the familiar Blue Star mark for the US and Blue Flame mark for Canada. CSA International is uniquely qualified to test and certify that gas appliances and accessories meet applicable US standards. Since 1925, the Blue Star approval mark has been the mark of choice for gas-fired appliances and accessories in the US. We test products for conformance with all applicable ANSI and CSA gas standards. CSA marked products are used and sold in the US everyday. The Warnock Hersey Mark (WH) is North Americas leading product safety and performance mark for building and construction products. Products bearing the WH Mark indicate compliance to relevant building codes, association criteria, and product safety and performance standards. The WH Mark can be found on more than 6,500 products ranging from fire doors and builders hardware to hearth, plumbing and construction products. Having Intertek's WH Mark on your product reflects your commitment to product safety, performance and quality to inspectors, builders and end users. The mark also signifies that the products manufacturing site(s) undergo periodic follow-up inspections to ensure ongoing compliance of the originally certified product.

Mi-T-M Corporation

800-553-9053

www.mitm.com

Ordering Information Extended Hours To serve you better, our customer service hours of operation are: Monday - Friday 7:30 am to 5:30 pm CST Products may be ordered or inquires sent 24 hours a day, 7 days a week via fax. How To Order Units and accessories are ordered through authorized Mi-T-M dealers and distributors. - Be prepared to advise the Mi-T-M Customer Service Representative of your Mi-T-M account number, model numbers, parts and descriptions. - Indicate your purchase order number and full name on order. - Specify exact shipping instructions. - With fax and/or mail-in orders, give full name, Mi-T-M account number, zip code and telephone number. Phone Fax Mail Internet E-mail 563-556-7484 563-556-1235 Mi-T-M Corporation www.mitm.com corp@mitm.com 800-553-9053 8650 Enterprise Drive www.mitmair.com Peosta, IA 52068 www.mitmheaters.com Internet – www.mitm.com Our website may be instantly accessed and offers: - 4-color viewing of products and specifications - Other services offered by Mi-T-M - A site search to find the equipment that's right for you - Company profile including Who's Who of Mi-T-M - A listing of service centers throughout the country - Quick e-mail access for questions and information requests about specific models or product lines - Mi-T-M on-line parts ordering and access to parts listings for the full Mi-T-M product lines Sales Policy Products are sold through authorized Mi-T-M dealers, National Accounts and OEMs as recognized by Mi-T-M. All new customers must complete a credit application. Mi-T-M will perform a credit check and upon approval, the customer will receive an account number and a line of credit. Production Schedule Customers can anticipate a lead time of one week for cold water pressure washers, air compressors, air compressor/generators, portable generators, portable heaters, jobsite boxes and wet/dry vacuums; a two week lead time for hot water pressure washers. Special units will require additional lead time. Shipping Orders shipped without specific shipping instructions are shipped "best way" as determined by Mi-T-M shipping department. Mi-T-M assumes no responsibility and makes no guarantees regarding air freight deliveries. Please allow seven working days before requesting tracking on lost or late shipments. In an effort to deliver Mi-T-M products to our customers in a timely manner, Mi-T-M developed a program where whole goods (pressure washers, air compressors, air compressor/generators, portable generators, portable heaters, jobsite boxes and wet/dry vacuums) and parts are shipped from separate locations in our facility. Our freight policy has not changed. Our customers are still responsible for outgoing freight on parts and whole goods. This may be altered by any minimum qualifying freight programs. Because our goal is to process all orders as soon as we receive them, our system will no longer allow additional items to be added to a previously processed order. Any additional orders will be handled as a new order. Freight Terms - All water treatment systems and parts – F.O.B. Peosta - Any combination of pressure washers, air compressors, air compressor/generators, portable generators, portable heaters, or wet/dry vacuums – may qualify for prepaid freight - Jobsite boxes – prepaid on 1,000 lbs. or more - Detergents – prepaid on twelve cases - Parts – prepaid and add - Trailer units – prepaid and add Warranty All warranty claims and returns of goods for repair shall be governed by the express terms of the Mi-T-M warranty, as provided in the conditions of our warranty, and limited to the replacement of defective parts, as provided in the conditions of the Mi-T-M warranty. To submit an electronic warranty claim go to www.mitm.com and click on the Warranty Claims links below the Advanced Product Search box on the home page. Merchandise Return Mi-T-M must be contacted before any product can be returned. The customer will receive a Returned Goods Authorization (RGA) number prior to the item being returned. Mi-T-M reserves the right to refuse returned product. Products must be in new and resalable condition. Products must be current production components. All products must be returned freight prepaid at shippers expense. Products returned C.O.D. for any reason will be refused. Credit not to exceed original purchase price will be issued on returned products approved for return subject to a 20% restocking fee. Submission of Claims All damages to merchandise – either internal or external – must be reported to the carrier shipping such merchandise, to permit an inspection report to be filed immediately. Claims of shortage of cartons, crates or boxes must be properly submitted to the carrier; claims for errors or shortages of contents must be submitted to Mi-T-M within 24 hours after delivery of such merchandise. In a continued commitment to improve quality, Mi-T-M reserves the right to make component or design changes when necessary. www.mitm.com

800-553-9053

Mi-T-M Corporation

Thank You To Our Suppliers Thank you to our suppliers for their constant support in making Mi-T-M a leader in our industry. Only the highest quality components are built into Mi-T-M equipment, and our suppliers continue to meet our stringent guidelines year after year.

Honda Engines have long been recognized as the industry leader in providing reliable, easy-starting and fuel-efficient small engines. Youâ&#x20AC;&#x2122;ll find Honda GX Series engines on a wide variety of rental, construction and premium power equipment.

General Pump offers the highest standard of customer service, pumps, components and technology available in the industry. GP is dedicated to exceeding the needs of the pressure washer industry today and in the future.

FLEXIBLE HOSE SYSTEMS

Schieffer is a major producer of flexible hose systems in the industrial and consumer pressure washer industry. Because of our advanced technologies and connecting techniques, we have become the choice of major OEM customers.

Since its inception in 2005, Pinnacle Products International has established itself as the go-to supplier for high quality, high value portable industrial comfort products and offers unparalleled quality and value in portable construction heaters and ventilation products.

Liquid Combustion Technology is located in Travelers Rest, SC and is a manufacturer of utility engines with distribution and sales operations throughout the USA, Canada, China, and Europe. LCT has a proven track record of quality and engineering excellence with over a 1.4 million engines sold to world class OEM's and retailers. LCT is engineering a new generation of power and reliability for all of your power equipment needs. For more information on LCT, please visit our website at www.LCTUSA.com. 86

Mi-T-M Corporation

800-553-9053

www.mitm.com

Subaru Robin's advanced technology, chain driven OHC engines, provide easier starting, lower noise and more power to give maximum performance on your Mi-T-M pressure washer, air compressor and generator.

AR, recognized worldwide as the leading manufacturer of triplex plunger pumps, is renowned for their high level of quality, consistency and flexibility. Distinctions in technological design and methods have contributed to leading the industry standards of today. Innovative and effective advancements in pump design are attributed to AR.

Suttner, the leading manufacturer of pressure washer parts, has been producing German engineered connectors, guns, wands, tips, and attachments for 40 years. Manufactured for top performance, Suttner components are a valuable addition to keep your customerâ&#x20AC;&#x2122;s equipment up and running, year in and year out. Suttner America Company provides timely shipping throughout North America from our fully stocked warehouse.

Since 1854 CURTIS-TOLEDO, Inc. has been designing and manufacturing solutions for industry. The FSCURTIS Air Compressors brand continues to be the symbol of quality and excellence in the design and manufacture of reciprocating air compressors, rotary-screw compressors and oil free compressors.

Our Promise We promise to deliver unmatched performance - from the quality of our products to the dedication of each employee who does what's right for our customer - every time. Customer Service Department

Front Row (left to right): Paul Pettinger - Brad Klein - Ron Snyder - Jeff Kifer - All Customer Service Representatives Row 2: Susie Cornwell, Administrative Assistant - Karen Steger, Receptionist Row 3: Luke McCarron, Customer Service Representative - Laura Runde, Customer Service Manager Row 4: Dan Wallin - Ryan Recker - Both Customer Service Representatives

Technical Service Department

Sales Department

Front row (left to right): Kevin Anstoetter, Rental Division Manager - Tim Ernst, Assistant Distributor Division Manager Matt Hoefer, Equipment Division Manager - Bill Murray, OEM Division Manager - Dennis Waller, Consumer Division Manager Row 2: Bryan McCarron, Air Compressor Division Manager - Aaron Auger, Water Treatment Division Manager - Scott Strohmeyer, Assistant Water Treatment Division Manager - Pat White, Sales Operation Manager Row 3: Vaughn Grimm, Governmental Division Manager - Becky Kremer, Sales Administration Manager - Don Holdridge, Paint Division Manager - Karl Loeffelholz, Distributor Division Manager Row 4: Jeff Schlichte, Assistant Paint Division Manager - Gerry Hess, Project Manager, OEM Division

Marketing Department

Front row (left to right): Scott Schiffer, Technical Service Assistant - Steve Cleary, Technical Service Manager Row 2: Bill Naber, Water Treatment Technical Service Manager - Kevin Gassmann, Technical Service Assistant

Left to right: Julie Schueller, Graphic Designer - Teresa Gottschalk, Graphic Designer

www.mitm.com

800-553-9053

Mi-T-M Corporation