Issuu on Google+


Performance Under Pressure® Is More Than A Tag Line When you purchase equipment with the Mi-T-M name on it, you are getting quality equipment that has been designed and tested by a very dedicated group of people with one goal in mind...build it to perform and build it to last. You see, we believe in craftsmanship and value. For more than 38 years Mi-T-M has set the standard for delivering outstanding quality. It goes into everything we build and everything we do. We’ve become known for performing under pressure whether it's supplying equipment to hurricane battered coasts or to the store down the street, we’ll get it there when you need it. This is the philosophy of AJ Spiegel who built the first Mi-T-M pressure washer in 1971 and it inspires every individual at Mi-T-M today. But it is also more than that. It’s an attitude...our equipment is dependable and so are we; we’ll do whatever it takes. "When was the last time you heard that from a manufacturer? We do it because our products are that good. We do it because we believe in what we do.

Performance Under Pressure...it's everything we stand for.

Table of Contents Pressure Washers 5 Air Compressors 33 Air Compressors/Generators 49 Portable Generators 53 Wet/Dry Vacuums 61 Jobsite Boxes 67 Space Heaters 70 Safety Certifications 77 Ordering & Warranty Information 78


Our Promise We promise to deliver unmatched performance – from the quality of our products to the dedication of each employee who does what’s right for our customer – every time. Customer Service Department

Front Row (left to right): Ron Snyder, Customer Service Representative - Susie Cornwell, Administrative Assistant Brad Klein, Customer Service Representative - Karen Steger, Receptionist Tom Demmer, Customer Service Representative Row 2: Julie Potter, Customer Service Representative - Ryan Recker, Customer Service Representative Laura Runde, Assistant Customer Service Manager - Jamie Coyle, Customer Service Manager

Techanical Service Department

Sales Department

Front row (left to right): Kevin Anstoetter, Rental Division Manager - Tim Ernst, Assistant Distributor Division Manager Matt Hoefer, Equipment Division Manager - Bill Murray, OEM Division Manager - Dennis Waller, Consumer Division Manager Row 2: Bryan McCarron, Air Compressor Division Manager - Aaron Auger, Water Treatment Division Manager - Scott Strohmeyer, Assistant Water Treatment Division Manager - Pat White, Sales Operation Manager Row 3: Vaughn Grimm, Governmental Division Manager - Becky Kremer, Sales Administration Manager - Don Holdridge, Paint Division Manager - Karl Loeffelholz, Distributor Division Manager Row 4: Jeff Schlichte, Assistant Paint Division Manager - Gerry Hess, Project Manager, OEM Division

Marketing Department

Front row (left to right): Scott Schiffer, Technical Service Assistant - Steve Cleary, Technical Service Manager Row 2: Bill Naber, Water Treatment Technical Service Manager - Kevin Gassmann, Technical Service Assistant

Left to right: Julie Schueller, Graphic Designer - Teresa Gottschalk, Graphic Designer www.mitm.com

800-553-9053

Mi-T-M Corporation

3


Pressure Washer Pumps

W A S H E R S P R E S S U R E

T H E M i - T- M D I F F E R E N C E Because Mi-T-M stands behind everything we build, it is important for us to select suppliers that are as dedicated and innovative as we are. Since 1982, General Pump has become a leader in the design and production of high performance products. AR (Annovi Reverberi) is the largest privately owned company of Triplex Plunger Pumps in the world. Both companies display extraordinary technology and innovation, quality and reliability, worthy of placement in Mi-T-M equipment. Each carries a 7-year warranty. New to our line is product that features a Mi-T-M branded pump. This pump is designed and engineered in the Mi-T-M tradition but is positioned at a lower price point for those customers who are looking for an economical solution. The Mi-T-M pump carries a 2-year warranty.

1 2 3 3 7 YEAR LIMITED

PA RT S & L A B O R WA R R A N T Y

YEAR LIMITED

SUBARU ENGINE WA R R A N T Y

YEAR LIMITED

Mi-T-M PUMP WA R R A N T Y

YEAR LIMITED

HONDA ENGINE WA R R A N T Y

YEAR LIMITED

AR PUMP WA R R A N T Y

7 10 YEAR LIMITED

PUMP WA R R A N T Y

YEAR LIMITED

PUMP WA R R A N T Y

7 10 YEAR LIMITED

PUMP WA R R A N T Y

4

Mi-T-M Corporation

800-553-9053

www.mitm.com

YEAR LIMITED

PUMP WA R R A N T Y


C O L D

A N D

H O T

Pressure Washers

D I R E C T D R I V E - B E LT D R I V E E L E C T R I C - G A S O L I N E - D I E S E L - N AT U R A L G A S / L P H A N D C A R R Y - P O R TA B L E - S TAT I O N A R Y www.mitm.com

800-553-9053

Mi-T-M Corporation

5


CD Series

P R E S S U R E

W A S H E R S

The perfect easy-to-carry and easy-tostore pressure washer option for around the home or on the jobsite.

P O R TA B L E - H A N D C A R R Y ELECTRIC/GASOLINE - DIRECT DRIVE

Stainless-steel and brass unloader with adjustable pressure valve and forged brass manifold

CD-1502-0MUH

C O L D

W AT E R

Powder coated steel mounting plate with center balanced lift and four (4) rubber isolators

CD-2003-0MHH

Electric Models

Pump: Direct drive triplex piston General pump with ceramic plungers · Thermal relief valve · Safety relief valve · In-line water strainer · Adjustable low pressure detergent injection · Pump accepts incoming water up to 180°F (2MUH models) Motor: Totally enclosed fan-cooled electric motor with thermal overload protection · 35-foot, 15-amp power cord (20-amp plug on CD-1502 models) with ground fault circuit interrupter (GFCI) Accessories: Variable high/low pressure nozzle with adjustable spray pattern (15-degree high/low pressure nozzle on 2MUH models) · 25-foot x 3⁄8-inch nonmarking hose with quick connects, swivel and bend restrictors · Professional-grade insulated trigger gun with safety lock-off · 36-inch two-piece insulated wand

Gasoline Model

PARTS & LABOR WARRANTY

Engine: Performance-proven Honda OHV engine with low-oil protection Unit Includes: Quick connect nozzles (0°, 15°, 25° and detergent nozzle) · 50-foot x 3⁄8-inch non-marking hose with quick connects, swivel and bend restrictors · Professional-grade insulated trigger gun with safety lock-off · 36-inch two-piece insulated wand Model No. CD-1002-0MUH CD-1002-2MUH* CD-1502-0MUH CD-1502-2MUH*

PSI 1000 1000 1500 1500

GPM 2.0 2.0 2.0 2.0

HP/Motor 1.5/120V, 1Ø, 12.5A 1.5/120V, 1Ø, 12.5A 2.0/120V, 1Ø, 17.0A 2.0/120V, 1Ø, 17.0A

1 1 3 7 YEAR LIMITED

Pump: Direct drive triplex piston General pump with ceramic plungers · Thermal relief valve · Safety relief valve · In-line water strainer · Adjustable low pressure detergent injection

YEAR LIMITED

HONDA ENGINE WARRANTY

Plug Type Dimensions (LxWxH) Ship Wt. Net Wt. NEMA 5-15P 20in.x11.5in.x14in. 70 lbs. 58 lbs. NEMA 5-15P 20in.x11.5in.x14in. 71 lbs. 66 lbs. NEMA 5-20P 20in.x11.5in.x14in. 76 lbs. 70 lbs. NEMA 5-20P 20in.x11.5in.x14in. 76 lbs. 70 lbs.

*Pump accepts incoming water up to 180°F.

Model No. CD-2003-0MHH

PSI GPM Displacement/Engine 2000 2.7 196cc Honda OHV

Dimensions (LxWxH) Ship Wt. Net Wt. 18in.x14.5in.x18in. 75 lbs. 56 lbs.

Options (Consult price list or www.mitm.com for more information on option descriptions and qualifying models) 18-0370, 18-0371 50-0161 CX-0030 6

Rotating nozzle High pressure detergent injection 50-foot high pressure hose

Mi-T-M Corporation

800-553-9053

www.mitm.com

YEAR LIMITED

Electric Models

ELECTRIC MOTOR WARRANTY

YEAR LIMITED

Gasoline Model

PUMP WARRANTY

NEMA 5-15P, 15-amp plug

NEMA 5-20P, 20-amp plug


The CA Series aluminum pressure washer is the ultimate answer for those applications requiring a lightweight, yet durable unit that is also extremely easy to handle.

C O L D

CA Series

P O R TA B L E - G A S O L I N E DIRECT DRIVE - ALUMINUM

P R E S S U R E

New models available with General pumps and external bypass system which allows more water into the system to protect from heat build-up

W AT E R

LS NEW MODE NAL R W IT H E X T EYS T E M B Y PA S S S

CA-4004-1MHB

Aluminum base plate and solid fulllength axle

W A S H E R S

Patented vibration isolation plate with four (4) rubber isolators for reduced movement

CA-3003-0MRB

Pump: Direct drive triplex piston AR, General or Mi-T-M pump with ceramic plungers · Stainless-steel and brass unloader · Adjustable pressure · Forged brass manifold · Thermal relief valve · In-line water strainer

1 2 3 3 7 YEAR LIMITED

PARTS & LABOR WARRANTY

YEAR LIMITED

SUBARU ENGINE WARRANTY

YEAR LIM ITED

Mi-T-M P UMP WARRANTY

YEAR LIMITED

HONDA ENGINE WARRANTY

YEAR LIMITED

AR PUMP WARRANTY

Engine: Performance-proven engine with low-oil protection Frame: Light, corrosion resistant aluminum frame · 1-inch aluminum tube handles for easier pulling · Convenient nozzle holder for quick connect nozzles · Pneumatic tires with tubes for longer life · Dual rubber isolators Unit Includes: Quick connect nozzles (0°, 15° and 25°) · 50-foot x 3⁄8-inch non-marking hose with quick connects, swivel and bend restrictors · Professional-grade insulated trigger gun with safety lock-off · 36-inch lance with rubber grip (48-inch lance on 3500 & 4000PSI models)

Model No. CA-2403-0MHB CA-2403-0MRB CA-2703-0MHB CA-2703-0MRB CA-2703-8MHB CA-2703-8MRB CA-3003-0MHB CA-3003-0MRB CA-3504-0MHB CA-3504-0MRB CA-3504-1MHB* CA-4004-0MHB CA-4004-0MRB CA-4004-1MHB*

PSI 2400 2400 2700 2700 2700 2700 3000 3000 3500 3500 3500 4000 4000 4000

GPM 2.4 2.4 2.4 2.4 2.4 2.4 3.0 3.0 3.5 3.5 4.0 3.5 3.5 4.0

Displacement/Engine 196cc Honda OHV 211cc Subaru OHC 196cc Honda OHV 211cc Subaru OHC 196cc Honda OHV 211cc Subaru OHC 270cc Honda OHV 265cc Subaru OHC 389cc Honda OHV 404cc Subaru OHV 389cc Honda OHV 389cc Honda OHV 404cc Subaru OHV 389cc Honda OHV

Dimensions (LxWxH) Ship Wt. Net Wt. 39in.x20.5in.x24.5in. 100 lbs. 73 lbs. 39in.x20.5in.x24.5in. 100 lbs. 73 lbs. 39in.x20.5in.x24.5in. 100 lbs. 73 lbs. 39in.x20.5in.x24.5in. 100 lbs. 73 lbs. 39in.x20.5in.x24.5in. 100 lbs. 73 lbs. 39in.x20.5in.x24.5in. 100 lbs. 73 lbs. 42.5in.x23.5in.x24.5in. 155 lbs. 105 lbs. 42.5in.x23.5in.x24.5in. 155 lbs. 105 lbs. 42.5in.x23.5in.x24.5in. 175 lbs. 125 lbs. 42.5in.x23.5in.x24.5in. 175 lbs. 125 lbs. 42.5in.x23.5in.x24.5in. 175 lbs. 125 lbs. 42.5in.x23.5in.x24.5in. 175 lbs. 125 lbs. 42.5in.x23.5in.x24.5in. 175 lbs. 125 lbs. 42.5in.x23.5in.x24.5in. 175 lbs. 125 lbs.

*Model comes standard with external bypass system and General pump.

Options (Consult price list or www.mitm.com for more information on option descriptions and qualifying models) 50-0161 AW-8400-0021 CX-0005

High pressure detergent injection Low pressure detergent injection Insulated dual lance

CX-0083, CX-0084 TX-1002-W

External bypass Puncture-proof tires

www.mitm.com

800-553-9053

Mi-T-M Corporation

7


JP Series

Direct drive triplex piston AR or Mi-T-M pump with ceramic plungers (AR pump shown)

P R E S S U R E

W A S H E R S

P O R TA B L E - G A S O L I N E - D I R E C T D R I V E

Optimal balance and maneuverability are great benefits the JP Series offers with its extended handle design and 1-inch steel construction.

C O L D

W AT E R

Powder coated and welded steel base plate

JP-2703-0MHB

Convenient gun/wand holder and hose wrap

Pump: Stainless-steel and brass unloader · Adjustable pressure · Forged brass manifold · Thermal relief valve · In-line water strainer Engine: Performance-proven engine with low-oil protection Frame: 1-inch powder coated steel tube handle for easier handling · Solid steel axle (threaded on 3500 & 4000-PSI models) · Pneumatic tires with tubes for longer life · Dual rubber isolators Unit Includes: Quick connect nozzles (0°, 15° and 25°) · 50-foot x ⁄8-inch nonmarking hose with quick connects, swivel and bend restrictors · Professional-grade insulated trigger gun with safety lock-off · 36-inch lance with rubber grip (48-inch lance on 3500 & 4000-PSI models) 3

Model No. JP-2403-0MHB JP-2403-0MRB JP-2703-0MHB JP-2703-0MRB JP-2703-8MHB JP-2703-8MRB JP-3003-0MHB JP-3003-0MRB JP-3004-0MHB JP-3504-0MHB JP-3504-0MRB JP-4004-1MHB JP-4004-1MRB

PSI 2400 2400 2700 2700 2700 2700 3000 3000 3000 3500 3500 4000 4000

GPM 2.4 2.4 2.4 2.4 2.4 2.4 3.0 3.0 3.5 3.5 3.5 3.5 3.5

Displacement/Engine 196cc Honda OHV 211cc Subaru OHC 196cc Honda OHV 211cc Subaru OHC 196cc Honda OHV 211cc Subaru OHC 270cc Honda OHV 265cc Subaru OHC 389cc Honda OHV 389cc Honda OHV 404cc Subaru OHV 389cc Honda OHV 404cc Subaru OHV

8

High pressure detergent injection Low pressure detergent injection Insulated dual lance

Mi-T-M Corporation

800-553-9053

CX-0083, CX-0084 TX-1002-W

www.mitm.com

PARTS & LABOR WARRANTY

YEAR LIMITED

SUBARU ENGINE WARRANTY

Dimensions (LxWxH) Ship Wt. Net Wt. 37in.x21in.x24.5in. 100 lbs. 75 lbs. 37in.x21in.x24.5in. 100 lbs. 75 lbs. 37in.x21in.x24.5in. 110 lbs. 85 lbs. 37in.x21in.x24.5in. 110 lbs. 85 lbs. 37in.x21in.x24.5in. 110 lbs. 85 lbs. 37in.x21in.x24.5in. 110 lbs. 85 lbs. 40in.x22.5in.x24.5in. 180 lbs. 130 lbs. 40in.x22.5in.x24.5in. 180 lbs. 130 lbs. 40in.x22.5in.x24.5in. 186 lbs. 136 lbs. 40in.x22.5in.x24.5in. 192 lbs. 142 lbs. 40in.x22.5in.x24.5in. 192 lbs. 142 lbs. 40in.x22.5in.x24.5in. 192 lbs. 142 lbs. 40in.x22.5in.x24.5in. 192 lbs. 142 lbs.

Options (Consult price list or www.mitm.com for more information on option descriptions and qualifying models) 50-0161 AW-8400-0021 CX-0005

1 2 3 3 7 YEAR LIMITED

External bypass Puncture-proof tires

YEAR LIMITED

Mi-T-M PUMP WARRANTY

YEAR LIMITED

AR PUMP WARRANTY

YEAR LIMITED

HONDA ENGINE WARRANTY


C O L D

P O R TA B L E - E L E C T R I C - D I R E C T D R I V E

W AT E R

JP Series

The powerful electric, direct-drive JP Series is the perfect selection for indoor applications, providing a quiet, exhaust-free operation.

Totally enclosed fan-cooled electric motor

Powder coated and welded steel base plate

P R E S S U R E

JP-2503-0ME3

W A S H E R S

JP-2003-1ME1

Convenient gun/wand holder and hose wrap

Pump: Direct drive triplex piston General or AR pump with ceramic plungers · Stainless-steel and brass unloader · Adjustable pressure · Forged brass manifold · Thermal relief valve · Safety relief valve · In-line water strainer · Adjustable low pressure detergent injection Motor: 35-foot power cord (ground fault circuit interrupter, GFCI, on 1.5 to 6.0-HP single-phase models) · NEMA 5-20P, 20 amp plug (1500-PSI models)

1 1 7 YEAR LIMITED

PARTS & LABOR WARRANTY

YEAR LIMITED

PUMP ELECTRIC MOTOR WARRANTY WARRANTY

USA & Canada: JP-1002, JP-1502 Single Phase Models

NEMA 5-15P, 15-amp plug

NEMA 5-20P, 20-amp plug

NEMA L15-20P, 20-amp plug

NEMA 6-20P, 20-amp plug

NEMA L15-30P, 30-amp plug

YEAR LIMITED

NEMA 6-30P, 30-amp plug NEMA 6-50P, 50-amp plug

JP-2003, JP-2503, JP-3004 Single Phase Models

Frame: 1-inch powder coated steel tube handles for easier pulling · Solid steel axle (threaded on 2000 to 3000-PSI models) · Pneumatic tires with tubes for longer life · Dual rubber isolators Unit Includes: Variable high/low pressure nozzle on 1000 to 2000-PSI models · Quick connect nozzles (0°, 15° and 25°) on 2500 & 3000-PSI models · 25-foot x 3⁄8-inch non-marking hose with quick connects, swivel and bend restrictors · Professional-grade insulated trigger gun with safety lock-off · 36-inch lance with rubber grip

Model No. PSI GPM # JP-1002-0ME1*^ 1000 2.0 JP-1002-2ME1*^#+ 1000 2.0 JP-1502-0ME1*^# 1500 2.0 JP-1502-2ME1*^#+ 1500 2.0 JP-2003-1ME1*^# 2000 2.8 JP-2503-1ME1*^ 2500 3.2 JP-2503-0ME3 2500 3.2 JP-3004-1ME1^ 3000 3.9 JP-3004-0ME3 3000 3.9

HP/Motor 1.5/120V, 1Ø, 15.0A 1.5/120V, 1Ø, 15.0A 2.0/120V, 1Ø, 20.0A 2.0/120V, 1Ø, 20.0A 4.0/230V, 1Ø, 16.0A 6.0/230V, 1Ø, 24.1A 6.0/230V, 3Ø, 15.0A or 6.0/460V, 3Ø, 7.5A 8.0/230V, 1Ø, 34.5A 8.0/230V, 3Ø, 20.0A or 8.0/460V, 3Ø, 10.0A

Plug Type Dimensions (LxWxH) Ship Wt. Net Wt. NEMA 5-15P 37in.x21in.x24.5in. 120 lbs. 90 lbs. NEMA 5-15P 37in.x21in.x24.5in. 120 lbs. 90 lbs. NEMA 5-20P 37in.x21in.x24.5in. 120 lbs. 90 lbs. NEMA 5-20P 37in.x21in.x24.5in. 120 lbs. 90 lbs. NEMA 6-20P 37in.x21in.x24.5in. 162 lbs. 112 lbs. NEMA 6-30P 44in.x26in.x27in. 275 lbs. 225 lbs. NEMA L15-20P 44in.x26in.x27in. 275 lbs. 225 lbs. NEMA 6-50P NEMA L15-30P

44in.x26in.x27in. 44in.x26in.x27in.

275 lbs. 225 lbs. 275 lbs. 225 lbs.

*35-foot cord with ground fault circuit interrupter (GFCI). ^Single-phase models are CSA certified. #Models are equipped with General pumps, all other models are equipped with AR pumps. +Pump accepts incoming water up to 180°F.

Options (Consult price list or www.mitm.com for more information on option descriptions and qualifying models) 50-0161 CX-0005 CX-0030

High pressure detergent injection Insulated dual lance 50-foot high pressure hose

CX-0066, CX-0067 TX-1002-W, TX-1302-W

460V on 6.0 & 8.0-HP, 3-phase models Puncture-proof tires

www.mitm.com

800-553-9053

Mi-T-M Corporation

9


A spin-off of Mi-T-M’s traditional steel belt-drive series, this aluminum model is an excellent choice for customers looking for a lightweight, yet industrialquality pressure washer.

W A S H E R S

CBA Series

P O R TA B L E - G A S O L I N E B E LT D R I V E - A L U M I N U M

ODELS NEW M TERNAL X W I T H ES S YS T E M B Y PA S

P R E S S U R E

New models available with General pumps and external bypass system which allows more water into the system to protect from heat build-up CBA-3504-0MRB

C O L D

W AT E R

Aluminum base plate and solid 7⁄8-inch diameter full-length threaded axle

Patented vibration isolation plate with four (4) rubber isolators for reduced movement Pump: Belt drive triplex piston AR or General pump with ceramic plungers · Stainless-steel and brass unloader · Adjustable pressure · Forged brass manifold · Thermal relief valve · Water filter with clear sleeve for screen inspection Engine: Performance-proven engine with low-oil protection Frame: Light, corrosion resistant aluminum frame · 1-inch aluminum tube handles for easier pulling · Two-piece belt guard for quick access to belts · Pneumatic tires with tubes for longer life · Dual rubber isolators Component: Dual cogged belt drive system for increased belt life Unit Includes: Quick connect nozzles (0°, 15°, 25° and 40°) · 50-foot x 3⁄8-inch non-marking hose with quick connects, swivel and bend restrictors · Professionalgrade insulated trigger gun with safety lock-off · 36-inch lance with rubber grip (48-inch lance on 3500 & 4000-PSI models) Model No. CBA-3003-0MHB CBA-3003-0MRB CBA-3004-0MHB CBA-3504-0MHB CBA-3504-0MRB CBA-3504-1MHB* CBA-4004-0MHB CBA-4004-0MRB CBA-4004-1MHB*

PSI 3000 3000 3000 3500 3500 3500 4000 4000 4000

GPM 3.0 3.0 3.5 3.7 3.7 4.0 3.4 3.4 3.5

Displacement/Engine 270cc Honda OHV 265cc Subaru OHC 389cc Honda OHV 389cc Honda OHV 404cc Subaru OHV 389cc Honda OHV 389cc Honda OHV 404cc Subaru OHV 389cc Honda OHV

Options (Consult price list or www.mitm.com for more information on option descriptions and qualifying models)

10

High pressure detergent injection Low pressure detergent injection Insulated dual lance

Mi-T-M Corporation

800-553-9053

CX-0085 TX-1302-W

www.mitm.com

External bypass Puncture-proof tires

YEAR LIMITED

PARTS & LABOR WARRANTY

HONDA ENGINE WARRANTY

YEAR LIMITED

YEAR LIMITED

SUBARU ENGINE WARRANTY

Dimensions (LxWxH) Ship Wt. Net Wt. 47in.x27.5in.x27.5in. 187 lbs. 137 lbs. 47in.x27.5in.x27.5in. 187 lbs. 137 lbs. 47in.x27.5in.x27.5in. 215 lbs. 165 lbs. 47in.x27.5in.x28.5in. 215 lbs. 165 lbs. 47in.x27.5in.x28.5in. 215 lbs. 165 lbs. 47in.x27.5in.x28.5in. 215 lbs. 165 lbs. 47in.x27.5in.x28.5in. 215 lbs. 165 lbs. 47in.x27.5in.x28.5in. 215 lbs. 165 lbs. 47in.x27.5in.x28.5in. 215 lbs. 165 lbs.

*Model comes standard with external bypass system and General pump. 50-0161 AW-8400-0021 CX-0005

1 3 3 7 YEAR LIMITED

PUMP WARRANTY


C O L D

P O R TA B L E - G A S O L I N E B E LT D R I V E

W AT E R

JCW Series

The JCW Series offers a compact, economical answer to your needs in the belt-drive pressure washer category. To complete the package, all JCW models feature a quality AR pump with a limited 7-year warranty.

Two-piece belt guard with 1⁄4-turn release for quick access to belts

P R E S S U R E

Powder coated steel base plate with welded reinforcement for reduced vibration

JCW-3004-0MHB

W A S H E R S

Dual cogged belt drive system for increased belt life

Pump: Belt drive triplex piston AR pump with ceramic plungers · Stainless-steel and brass unloader · Adjustable pressure · Forged brass manifold · Thermal relief valve · Water filter with clear sleeve for screen inspection

1 3 3 7 YEAR LIMITED

PARTS & LABOR WARRANTY

HONDA ENGINE WARRANTY

YEAR LIMITED

YEAR LIM ITED

SUBARU ENGINE WARRANTY

Engine: Performance-proven engine with low-oil protection

YEAR LIMITED

Frame: 11⁄4-inch powder coated steel tube handles (1-inch on 2400 to 2700-PSI models) · Convenient gun/wand holder and hose wrap · Solid steel threaded axle · Pneumatic tires with tubes for longer life · Dual rubber isolators Unit Includes: Quick connect nozzles (0°, 15°, 25° and 40°) · 50-foot x 3⁄8-inch non-marking hose with quick connects, swivel and bend restrictors · Professionalgrade insulated trigger gun with safety lock-off · 36-inch lance with rubber grip (48-inch on 3500 & 4000-PSI models)

PUMP WARRANTY

Model No. JCW-2403-0MHB JCW-2403-0MRB JCW-2703-0MHB JCW-2703-0MRB JCW-3003-0MHB JCW-3003-0MRB JCW-3004-0MHB JCW-3504-0MHB JCW-3504-0MRB JCW-4004-1MHB JCW-4004-1MRB

PSI 2400 2400 2700 2700 3000 3000 3000 3500 3500 4000 4000

GPM 2.8 2.8 2.4 2.4 3.0 3.0 3.5 3.7 3.7 3.4 3.4

Displacement/Engine 196cc Honda OHV 211cc Subaru OHC 196cc Honda OHV 211cc Subaru OHC 270cc Honda OHV 265cc Subaru OHC 389cc Honda OHV 389cc Honda OHV 404cc Subaru OHV 389cc Honda OHV 404cc Subaru OHV

Dimensions (LxWxH) Ship Wt. Net Wt. 37.5in.x22in.x25in. 171 lbs. 121 lbs. 37.5in.x22in.x25in. 171 lbs. 121 lbs. 37.5in.x22in.x25in. 171 lbs. 121 lbs. 37.5in.x22in.x25in. 171 lbs. 121 lbs. 39.5in.x28.5in.x26in. 232 lbs. 178 lbs. 39.5in.x28.5in.x26in. 232 lbs. 178 lbs. 39.5in.x28.5in.x26in. 243 lbs. 189 lbs. 39.5in.x28.5in.x26in. 245 lbs. 191 lbs. 39.5in.x28.5in.x26in. 245 lbs. 191 lbs. 39.5in.x28.5in.x26in. 249 lbs. 195 lbs. 39.5in.x28.5in.x26in. 249 lbs. 195 lbs.

Options (Consult price list or www.mitm.com for more information on option descriptions and qualifying models) 50-0161 AW-8400-0021 CX-0005

High pressure detergent injection Low pressure detergent injection Insulated dual lance

CX-0085 TX-1002-W, TX-1302-W

www.mitm.com

External bypass Puncture-proof tires

800-553-9053

Mi-T-M Corporation

11


CW Series

Powder coated 1⁄4-inch steel base plate

P R E S S U R E

W A S H E R S

The workhorse CW Premium Series is built for industrial cleaning jobs and its compact design makes for easy mobility.

P R E M I U M - P O R TA B L E G A S O L I N E - B E LT D R I V E

CW-4004-4MGR

C O L D

W AT E R

External bypass system allows more water into the system to protect from heat build-up

Pneumatic mag tires with tubes for longer life and solid steel threaded axle

Pump: Belt drive triplex piston General pump with ceramic plungers · Stainlesssteel and brass unloader · Forged brass manifold (Nickel plated brass on CW-4004-3MV0) · Thermal relief valve · Water filter with clear sleeve for screen inspection Engine: Performance-proven engine with low-oil protection Frame: 11⁄4-inch powder coated steel tube handles · Two-piece belt guard with 1 ⁄4-turn release for quick access to belts · Convenient gun/wand holder and hose wrap · Dual rubber isolators Component: Heavy-duty dual cogged belt drive system for increased belt life Unit Includes: Quick connect nozzles (0°, 15°, 25° and 40°) · 50-foot x 3⁄8-inch non-marking hose with quick connects, swivel and bend restrictors · Professionalgrade insulated trigger gun with safety lock-off · 36-inch lance with rubber grip (48-inch lance on 3500 & 4000-PSI models) Model No. CW-2505-4MGH CW-3004-4MGH CW-3504-4MGH CW-3504-4MGR CW-4004-4MGH CW-4004-4MGR CW-4004-3MV0*

PSI 2500 3000 3500 3500 4000 4000 4000

GPM 4.4 3.5 3.7 3.7 3.5 3.5 4.0

Displacement/Engine 389cc Honda OHV 389cc Honda OHV 389cc Honda OHV 404cc Subaru OHV 389cc Honda OHV 404cc Subaru OHV 480cc Vanguard OHV

Options (Consult price list or www.mitm.com for more information on option descriptions and qualifying models)

12

High pressure detergent injection Low pressure detergent injection Insulated dual lance Electric start (battery included) Roll cage Puncture-proof tires

Mi-T-M Corporation

800-553-9053

www.mitm.com

YEAR LIMITED

YEAR LIMITED

PARTS & LABOR VANGUARD ENGINE HONDA ENGINE WARRANTY WARRANTY WARRANTY

YEAR LIMITED

SUBARU ENGINE WARRANTY

Dimensions (LxWxH) Ship Wt. Net Wt. 45.5in.x28in.x26in. 290 lbs. 216 lbs. 45.5in.x28in.x26in. 290 lbs. 216 lbs. 46in.x28in.x30in. 290 lbs. 216 lbs. 46in.x28in.x30in. 290 lbs. 216 lbs. 46in.x28in.x30in. 290 lbs. 216 lbs. 46in.x28in.x30in. 290 lbs. 216 lbs. 46in.x28in.x30in. 330 lbs. 256 lbs.

*Electric start (battery included). 50-0161 AW-8400-0021 CX-0005 CX-0045 CX-0054, CX-0055 TX-1302-M

2 2 3 3 10 YEAR LIMITED

YEAR LIMITED

PUMP WARRANTY


C O L D

P O R TA B L E - E L E C T R I C B E LT D R I V E

W AT E R

CW Series

Great for indoors! This powerful, electric belt drive series is the perfect solution for any industrial job requiring exhaust-free operation.

External bypass system creates less heat build-up

P R E S S U R E

CW-3004-4ME3

Water filter with clear sleeve for screen inspection

W A S H E R S

Totally enclosed powder coated steel belt guard

Pump: Belt drive triplex piston General pump with ceramic plungers · Stainlesssteel and brass unloader · Forged brass manifold · Thermal relief valve Motor: Totally enclosed fan-cooled electric motor with thermal overload protection · 10-foot power cord

1 2 7 YEAR LIMITED

ELECTRIC MOTOR WARRANTY

YEAR LIMITED

PARTS & LABOR PUMP WARRANTY WARRANTY

G

NEMA L15-30P, 30-amp plug

NEMA 6-50P, 50-amp plug

YEAR LIMITED

NEMA 15-50P, 50-amp plug

Frame: Powder coated steel tube handles · Powder coated steel base plate · Convenient gun/wand holder and hose wrap · Solid steel threaded axle · Pneumatic tires with tubes for longer life · Dual rubber isolators Component: Heavy-duty dual cogged belt drive system and cast-iron pulleys Unit Includes: Quick connect nozzles (0°, 15°, 25° and 40°) · 50-foot x 3⁄8-inch non-marking hose with quick connects, swivel and bend restrictors · Professionalgrade insulated trigger gun with safety lock-off · 36-inch lance with rubber grip (48-inch on 4000 & 5000-PSI models)

Model No. PSI GPM CW-2405-4ME1 2400 4.6 CW-2405-4ME3* 2400 4.6 CW-3004-4ME1 3000 3.5 CW-3004-4ME3* 3000 3.5 CW-3005-0ME1 3000 4.8 CW-3005-0ME3* 3000 4.8 CW-3006-4ME3* 3000 5.7 CW-4004-0ME3* 4000 3.9 CW-5004-0ME3* 5000 4.0

HP/Motor 7.5/230V, 1Ø, 35.7A 8.0/230V, 3Ø, 24.7A or 8.0/460V, 3Ø, 11.5A 7.5/230V, 1Ø, 35.0A 8.0/230V, 3Ø, 23.0A or 8.0/460V, 3Ø, 11.5A 10.0/230V, 1Ø, 37.5A 10.0/230V, 3Ø, 25.6A or 10.0/460V, 3Ø, 12.8A 15.0/230V, 3Ø, 40.0A or 15.0/460V, 3Ø, 20.0A 15.0/230V, 3Ø, 40.0A or 15.0/460V, 3Ø, 20.0A 15.0/230V, 3Ø, 40.0A or 15.0/460V, 3Ø, 20.0A

Plug Type Dimensions (LxWxH) Ship Wt. Net Wt. NEMA 6-50P 46in.x28in.x30in. 345 lbs. 333 lbs. NEMA L15-30P 46in.x28in.x30in. 255 lbs. 243 lbs. NEMA 6-50P NEMA L15-30P

46in.x28in.x30in. 46in.x28in.x30in.

350 lbs. 338 lbs. 330 lbs. 318 lbs.

NEMA 6-50P NEMA 15-50P

45.5in.x32.5in.x30in. 45.5in.x32.5in.x30in.

470 lbs. 396 lbs. 450 lbs. 376 lbs.

NEMA 15-50P

45.5in.x32.5in.x30in.

505 lbs. 431 lbs.

NEMA 15-50P

45.5in.x32.5in.x30in.

505 lbs. 431 lbs.

NEMA 15-50P

45.5in.x32.5in.x30in.

505 lbs. 431 lbs.

*460V motors available as no-cost options.

Options (Consult price list or www.mitm.com for more information on option descriptions and qualifying models) 50-0161 AW-8400-0021 CX-0003, CX-0057 & CX-0062

High pressure detergent injection Low pressure detergent injection 460V, 3-Phase models

CX-0005 TX-1302-W

www.mitm.com

Insulated dual lance Puncture-proof tires

800-553-9053

Mi-T-M Corporation

13


CW Series

NEW 8.0 SIN GLE PHA SE & 10. 0-H P THR EEPHA SE MO DEL S

Pump accepts incoming water up to 175°F

P R E S S U R E

W A S H E R S

S TAT I O N A R Y - E L E C T R I C - B E LT D R I V E

Designed for wash bays, golf courses and restaurant applications. This stainlesssteel pressure washer offers a superior package design combined with a quiet operating system.

W AT E R C O L D

Removable panel for pump access

CW-2004-SME1 shown with standard low pressure detergent injector

Stainless-steel base and frame

Pump: Belt drive triplex piston General pump with ceramic plungers · Stainlesssteel and brass unloader · Forged brass manifold · Thermal relief valve · In-line water strainer · Quick connect low pressure detergent injection · Bypass system · Pump accepts incoming water up to 180°F Motor: Open drip-proof motor (1000 & 3000-PSI models) · Totally enclosed fancooled electric motor with manual thermal overload protection (2000-PSI models) · 4-foot electrical cord with ground fault circuit interrupter (NEMA 5-20P, 20-amp plug on 1000-PSI model) Frame: Easy-to-access cabinet design · Four (4) rubber isolators Components: Dual cogged belt drive system · Conveniently located on/off switch · Time delay shutdown will shut unit off automatically when trigger gun is released and timer reaches setting Unit Includes: Quick connect nozzles (0°, 15°, 25° and 40°) · 50-foot x 3⁄8-inch non-marking hose with quick connects, swivel and bend restrictors · Professionalgrade insulated trigger gun with safety lock-off · Adjustable pressure insulated dual lance Model No. CW-1003-SME1 CW-2004-SME1 CW-2004-SME3 CW-3004-SME1 CW-3004-SME3 CW-3005-SME3

PSI 1000 2000 2000 3000 3000 3000

GPM 2.5 3.9 3.9 3.5 3.5 4.8

HP/Motor 2.0/120V, 1Ø, 18.8A 6.0/230V, 1Ø, 24.1A 6.0/230V, 3Ø, 15.0A 8.0/230V, 1Ø, 37.0A 8.0/230V, 3Ø, 20.0A 10.0/230V, 3Ø, 25.0A

Plug Type NEMA 5-20P NEMA 6-30P NEMA L15-20P NEMA 6-50P NEMA L15-30P NEMA 15-50P

14

Mi-T-M Corporation

Stainless-steel wall mounting bracket Powder coated steel wall mounting bracket Auto start/stop 460V, 3-phase models Remote box 208V, single-phase 208V, 3-phase

800-553-9053

www.mitm.com

YEAR LIMITE D

ELECTRIC MOTOR WARRANTY

PARTS & LAB O R WARRANTY

CSA Listed: CW-1003-SME1 CW-2004-SME1 CW-2004-SME3 CW-3004-CME3

YEAR LIMITED

PUMP WARRANTY

Dimensions (LxWxH) Ship Wt. Net Wt. 29.5in.x20.5in.x15in. 222 lbs. 172 lbs. 29.5in.x20.5in.x15in. 272 lbs. 214 lbs. 29.5in.x20.5in.x15in. 262 lbs. 204 lbs. 29.5in.x20.5in.x15in. 302 lbs. 244 lbs. 29.5in.x20.5in.x15in. 292 lbs. 234 lbs. 29.5in.x20.5in.x15in. 322 lbs. 264 lbs.

Options (Consult price list or www.mitm.com for more information on option descriptions and qualifying models) AW-9501-0000 AW-9502-0000 CX-0069 CX-0076, CX-0077, CX-0092 CX-0078 CX-0087, CX-0089, CX-0091 CX-0088, CX-0090

1 2 7 YEAR LIMITED

NEMA 5-20P, 20-amp plug

NEMA L15-20P, 20-amp plug

NEMA L15-30P, 30-amp plug

NEMA 6-30P, 30-amp plug

G

NEMA 15-50P, 50-amp plug

NEMA 6-50P, 50-amp plug


C O L D

P O R TA B L E / S TAT I O N A R Y D I E S E L - B E LT D R I V E

W AT E R

CW Series

The CW Series offers a robust and reliable diesel belt drive pressure washer designed for shipyards and off-shore applications.

Belt drive triplex ceramic General plunger pump

P R E S S U R E

CW-3004-4MDY

Professional Yanmar diesel engine

W A S H E R S

Four-cylinder fourcycle water-cooled Kubota diesel engine with electric start (battery included)

CW-6106-2MDK

CW-3004-4MDY

Pump: Stainless-steel and brass unloader with fixed pressure · Forged brass manifold · Thermal relief valve · Water filter with clear sleeve for screen inspection Engine: 0.95-gallon fuel tank capacity Frame: Powder coated steel tube handles, base plate and enclosed belt guard · Hose wrap and gun/wand holder · Solid steel threaded axle · Pneumatic tires with tubes · Rubber isolators Component: Dual cogged belt drive system and cast-iron pulleys Unit Includes: Quick connect nozzles (0°, 15°, 25° and 40°) · 50-foot x 3⁄8-inch non-marking hose with quick connects, swivel and bend restrictors · Professional-grade insulated trigger gun with safety lock-off · 36-inch lance with rubber grip

CW-6106-2MDK

2 2 3 7 YEAR LIMITED

YEAR LIMITED

PARTS & LABOR YANMAR ENGINE WARRANTY WARRANTY

YEAR LIMITED

KUBOTA ENGINE WARRANTY

YEAR LIMITED

ETL Listed: CW-3004-4MDY

PUMP WARRANTY

Pump: Stainless-steel and brass unloader with fixed pressure · Nickel plated manifold · Thermal relief valve Engine: 12-volt electric starter with alternator and regulator · 9.38-gallon fuel tank capacity Frame: Powder coated heavy-duty steel channel skid frame · Roll cage and lifting hook · Totally enclosed powder coated steel belt guard · Hose wrap and gun/wand holder Components: Pressure indicating gauge · Pressure adjustable 1000 to 6100-PSI by engine throttle · Positive drive synchronous belt/sprocket system · Large 20-gallon float tank (unloader bypasses to tank) · Easily accessible control panel Unit Includes: Quick connect nozzles (0°, 15°, 25° and 40°) · 50-foot x 1⁄2-inch wire-braided pressure hose · Professional-grade insulated trigger gun with safety lock-off · 48-inch lance with adjustable grip and #5.0 nozzle

Model No. CW-3004-4MDY CW-6106-2MDK*

PSI GPM HP/Engine 3000 3.5 9.0 Yanmar 6100 6.3 37.5 Kubota

Dimensions (LxWxH) Ship Wt. Net Wt. 46in.x28in.x30in. 321 lbs. 245 lbs. 55in.x42in.x52.5in. 1535 lbs. 1010 lbs.

*Electric start (battery included).

Options (Consult price list or www.mitm.com for more information on option descriptions and qualifying models) 50-0161 AW-8400-0021 CX-0005

High pressure detergent injection Low pressure detergent injection Insulated dual lance

CX-0044 CX-0056 TX-1302-W

Electric start (battery included) Roll cage Puncture-proof tires

www.mitm.com

800-553-9053

Mi-T-M Corporation

15


W A S H E R S

CWC Series

P O R TA B L E - G A S O L I N E - B E LT D R I V E

This high-PSI model comes protected in a roll cage design, offering up an abundance of pressure in a compact, user-friendly unit. The 8-hour run time capacity is ideal for continuous cleaning applications typical in many industrial operations.

P R E S S U R E

11.5-gallon capacity fuel tank allows for 8-hour running time

CWC-5004-1MGH

C O L D

W AT E R

Patented frame design includes powder coated steel frame with 11⁄4-inch roll cage, handles and lifting hook

Pneumatic mag tires with tubes, locking tire brake and solid steel threaded axles

CWC-6004-2MGH

Pump: Belt drive triplex piston General or AR pump with ceramic plungers · Preset stainless-steel and brass unloader · Forged brass manifold · Thermal relief valve · Safety relief valve · Water filter with clear sleeve for screen inspection (High capacity water filter on 3000-PSI model) · Pump oil drain Engine: Performance-proven OHV engine with low-oil protection · Electric start (battery included) · Engine oil drain Frame: Two-piece belt guard with 1⁄4-turn release for quick access to belts · Convenient gun/wand holder and hose wrap Components: Heavy-duty dual cogged belt drive system with cast iron pulleys · Easy start valve · Large canister high mount muffler (3008, 5005 & 6004 models) · Polyethylene tank will not rust

2 3 7 YEAR LIMITED

PARTS & LABOR WARRANTY

Unit Includes: Quick connect nozzles (0°, 15°, 25° and 40°) · 50-foot x 3⁄8-inch non-marking hose with quick connects, swivel and bend restrictors (1⁄2-inch on 3000-PSI model) · Professional-grade insulated trigger gun with safety lock-off · 48-inch lance with rubber grip Model No. CWC-3008-2MGH CWC-5004-1MGH* CWC-5004-2MGH CWC-5005-2MGH CWC-6004-2MGH

PSI 3000 5000 5000 5000 6000

GPM 7.8 4.0 4.0 4.5 3.7

Displacement/Engine 670cc Honda OHV 614cc Honda OHV 614cc Honda OHV 670cc Honda OHV 670cc Honda OHV

Dimensions (LxWxH) Ship Wt. Net Wt. 43in.x27.75in.x36in. 511 lbs. 388 lbs. 43in.x27.75in.x36in. 501 lbs. 378 lbs. 43in.x27.75in.x36in. 501 lbs. 378 lbs. 43in.x27.75in.x36in. 511 lbs. 388 lbs. 43in.x27.75in.x36in. 511 lbs. 388 lbs.

*Model equipped with AR pump, all other models equipped with General pumps.

Option (Consult price list or www.mitm.com for more information on option descriptions and qualifying models) TX-1304-M

16

Puncture-proof tires

Mi-T-M Corporation

800-553-9053

www.mitm.com

YEAR LIMITED

HONDA ENGINE WARRANTY

YEAR LIMITED

PUMP WARRANTY

ETL Listed: CWC-5004-1MGH CWC-5004-2MGH CWC-5005-2MGH


C O L D

S TAT I O N A R Y - E L E C T R I C - B E LT D R I V E

W AT E R

CHV Series

Get more power with less pressure! Mi-T-M's cold water, high volume wash is the perfect answer for applications that require cleaning of heavy solids, especially from large industrial equipment. Ideal for wash bay set-ups.

Belt drive diaphragm pump with pulsation dampener

P R E S S U R E

Pressure regulator with manual dump lever and gauge

CHV-0525-0ME3 shown with remote start control box option (CX-0075)

Motor: Totally enclosed fan-cooled electric motor with thermal overload protection · 10-foot, 8/3 power cord on single-phase · 10-foot, 10/4 power cord on three-phase

Makeup water shut-off solenoid and flow switch on outlet for time delay shutdown

Frame: Powder coated steel base plate · Four (4) rubber isolators Components: Time delay shutdown · Heavy-duty dual cogged belt drive system and cast-iron pulleys

W A S H E R S

Pump: Aluminum manifold

Unit Includes: Stainless-steel long range nozzle · 50-foot x 3⁄4-inch non-marking hose with quick connects · High volume gun with adjustable pattern from straight stream to cone mist Typical Water Treatment Installation CHV-0505-0ME3 connected to optional 300-gallon tank (CX-0072) which is connected to optional sump pump and in-ground fiberglass pit from our water treatment line.

1 1 1 YEAR LIMITED

PARTS & LABOR WARRANTY

YEAR LIMITED

YEAR LIMITED

PUMP ELECTRIC MOTOR WARRANTY WARRANTY

Model No. CHV-0525-0ME1 CHV-0525-0ME3

PSI GPM HP/Motor 500 25.0 10.0/230V, 1Ø, 41.5A 500 25.0 10.0/230V, 3Ø, 25.6A

Plug Type Dimensions (LxWxH) Ship Wt. Net Wt. NEMA 6-50P 38in.x23.5in.x24in. 432 lbs. 372 lbs. NEMA L15-30P 38in.x23.5in.x24in. 407 lbs. 347 lbs.

Options (Consult price list or www.mitm.com for more information on option descriptions and qualifying models) NEMA L15-30P, NEMA 6-50P, 30-amp plug 50-amp plug

16-0440 50-0185 CX-0072 CX-0073 CX-0074 CX-0075

Replacement gun Accessory hose reel 300-gallon tank 460V, 3-phase models (NEMA L16-20P) 18-inch stand Remote start control box

NEMA L16-20P, 20-amp plug

www.mitm.com

800-553-9053

Mi-T-M Corporation

17


HSE Series

Energy efficient topfired heat exchanger designed for convenient troubleshooting and easy maintenance

P R E S S U R E

W A S H E R S

P O R TA B L E - E L E C T R I C - D I R E C T D R I V E

This compact, portable, hot water pressure washer offers quiet operation and is suitable for a wide variety of industrial applications.

H O T

W AT E R

High-quality fuel filter/water separator ensures clean fuel supply HSE-2003-0M10

Pump: Direct drive triplex piston General pump with ceramic plungers · Stainless-steel and brass unloader valve · Forged brass manifold · Thermal relief valve · High pressure detergent injection (low pressure on HSE-1002-0M11) Motor: Totally enclosed fan-cooled electric motor with manual thermal overload protection · 35-foot power cord with in-line GFCI which meets required CSA certification · Solid state electronic ignition Frame: Reinforced powder coated steel tube frame with center balanced lifting hook · Powder coated steel hose reel mounting bracket · Electric cord hanger · Powder coated steel gun/wand holder · Solid steel threaded axles · Four pneumatic tires with tubes · Locking tire brake Components: Complete system diagnostic board · Float tank (N/A on HSE-1002-0M11) · Pressure and high limit safety controls · No. 1 or No. 2 diesel or kerosene fired burner (Bio-fuel not approved at this time) · Polyethylene burner fuel tank · Easy coil drain helps prevent freezing in cold weather

1 2 3 7 YEAR LIMITED

ELECTRIC MOTOR WARRANTY

YEAR LIMITED

COIL WARRANTY

YEAR LIMITED

PARTS & LABOR WARRANTY

YEAR LIMITED

PUMP WARRANTY

Unit Includes: 50-foot x 3⁄8-inch steel wire-braided pressure hose with screw connects, swivel and bend restrictors · Professional-grade insulated trigger gun with safety lock-off · Adjustable pressure insulated dual lance with 15-degree fixed and detergent nozzle Miscellaneous: Temperature rise 150°F/66°C above ambient, maximum outlet temperature is 200°F · Water output temperature is 190°-200°F (Excludes HSE-1002-SM10) · Water output temperature for "wet" steam is approximately 250°F (HSE-1002-SM10) · Operates at 650-PSI in "wet" steam mode (HSE-1002-SM10)

Burner Fuel Model No. PSI GPM HP/Motor Plug Type Tank Cap. HSE-1002-0M11* 1000 2.0 1.5/120V, 1Ø, 15.0A NEMA 5-15P 4.0 gallon HSE-1002-0M10 1000 2.0 1.5/120V, 1Ø, 15.0A NEMA 5-15P 4.0 gallon HSE-1002-SM10^ 1000 2.0 1.5/120V, 1Ø, 15.0A NEMA 5-15P 4.0 gallon HSE-1502-0M10 1500 2.0 2.0/120V, 1Ø, 19.0A NEMA 5-20P 4.0 gallon HSE-2003-0M10 2000 2.8 4.0/230V, 1Ø, 18.0A NEMA 6-20P 4.0 gallon

Options (Consult price list or www.mitm.com for more information on option descriptions and qualifying models)

18

Auto start/stop Auto start/stop-steam Auto start/stop-CAD cell

Mi-T-M Corporation

800-553-9053

HX-0057 - HX-0059 HX-0161, HX-0214 TX-1004-W

www.mitm.com

NEMA 5-20P, 20-amp plug

Burner Fuel Cons. Dimensions (LxWxH) Ship Wt. 1.33 gph 34in.x29in.x33in. 368 lbs. 1.33 gph 34in.x29in.x33in. 368 lbs. 1.33 gph 34in.x29in.x33in. 368 lbs. 1.33 gph 34in.x29in.x33in. 373 lbs. 1.33 gph 34in.x29in.x33in. 393 lbs.

*Low pressure detergent injection. ^Combination wet steam cleaner/pressure washer. HX-0050, HX-0051 HX-0052 - HX-0054 HX-0055, HX-0056

NEMA 5-15P, 15-amp plug

Auto start/stop-steam/CAD cell Hour meter Puncture-proof tires

NEMA 6-20P, 20-amp plug

Net Wt. 245 lbs. 245 lbs. 245 lbs. 250 lbs. 270 lbs.


W AT E R P R E S S U R E

Energy efficient topfired powder coated heat exchanger designed for convenient troubleshooting and easy maintenance

W A S H E R S

Heavy-duty dual cogged belt drive system to prevent slippage

HSE-3004-0M10

1 2 3 7

Pump: Belt drive triplex piston General pump with ceramic plungers · Stainless-steel and brass unloader valve · Forged brass manifold · Thermal relief valve · High pressure detergent injection

YEAR LIMITED

YEAR LIMITED

ELECTRIC MOTOR WARRANTY

H O T

P O R TA B L E - E L E C T R I C - B E LT D R I V E

HSE Series

For the ultimate in electric, hot water pressure washers, opt for this belt drive unit that offers larger volume capacity and quiet operation.

PARTS & LABOR WARRANTY

YEAR LIMITED

COIL WARRANTY

NEMA L15-20P, 20-amp plug

Motor: Totally enclosed fan-cooled electric motor with manual thermal overload protection · 35-foot power cord (ground fault circuit interrupter on HSE-2504-0M10)

YEAR LIMITED

Frame: Reinforced powder coated steel tube frame with center balanced lifting hook · Powder coated steel hose reel mounting bracket · Electric cord hanger · Powder coated steel gun/wand holder · Solid steel threaded axles · Four pneumatic tires with tubes · Locking tire brake

PUMP WARRANTY

NEMA L15-30P, 30-amp plug

Components: High quality fuel filter/water separator ensures clean fuel supply · Complete system diagnostic board · Float tank · Pressure and high limit safety controls · No. 1 or No. 2 diesel or kerosene fired burner (Bio-fuel not approved at this time) · Polyethylene burner fuel tank · Easy coil drain helps prevent freezing in cold weather · Electrodes are self-gapping for proper ignition and combustion Unit Includes: 50-foot x 3⁄8-inch steel wire-braided pressure hose with screw connects, swivel and bend restrictors · Professional-grade insulated trigger gun with safety lock-off · Adjustable pressure insulated dual lance with 15-degree fixed and detergent nozzle

NEMA 6-30P, 30-amp plug

NEMA 6-50P, 50-amp plug

Miscellaneous: Temperature rise 150°F/66°C above ambient, maximum outlet temperature is 200°F

Burner Fuel Model No. PSI GPM HP/Motor Plug Type Tank Cap. HSE-2504-0M10 2500 3.2 6.0/230V, 1Ø, 25.0A NEMA 6-30P 10.0 gallon HSE-2504-0M30 2500 3.2 6.0/230-460V, 3Ø, 16.0A NEMA L15-20P 10.0 gallon HSE-3004-0M10 3000 3.5 8.0/230V, 1Ø, 36.0A NEMA 6-50P 10.0 gallon HSE-3004-0M30 3000 3.5 8.0/230-460V, 3Ø, 24.0A NEMA L15-30P 10.0 gallon HSE-3504-0M10 3500 3.3 10.0/230V, 1Ø, 39.0A NEMA 6-50P 10.0 gallon HSE-3504-0M30 3500 3.3 10.0/230-460V, 3Ø, 28.0A NEMA L15-30P 10.0 gallon

Burner Fuel Cons. 2.10 gph 2.10 gph 2.10 gph 2.10 gph 2.10 gph 2.10 gph

Dimensions (LxWxH) Ship Wt. 49.5in.x28in.x40.5in. 699 lbs. 49.5in.x28in.x40.5in. 688 lbs. 49.5in.x28in.x40.5in. 737 lbs. 49.5in.x28in.x40.5in. 732 lbs. 49.5in.x28in.x40.5in. 761 lbs. 49.5in.x28in.x40.5in. 742 lbs.

Net Wt. 569 lbs. 558 lbs. 607 lbs. 602 lbs. 631 lbs. 612 lbs.

Options (Consult price list or www.mitm.com for more information on option descriptions and qualifying models) HX-0070 HX-0071 - HX-0073 HX-0074 HX-0075 - HX-0077

Auto start/stop Auto start/stop-steam Auto start/stop-CAD cell Auto start/stop-steam/CAD cell

HX-0085 - HX-0087 HX-0088 HX-0161 TX-1304-W

460V Skid feet Hour meter Puncture-proof tires

www.mitm.com

800-553-9053

Mi-T-M Corporation

19


HSP Series

C NEW 404C U R SUBA MODEL

Energy efficient topfired powder coated heat exchanger designed for convenient troubleshooting and easy maintenance

P R E S S U R E

W A S H E R S

P O R TA B L E - G A S O L I N E - D I R E C T D R I V E

The HSP Series is designed with the Mi-T-M patented electro magnetic firing system, which means there is no need for a 12V battery, generator, blower motor and alternator; making these units especially maintenance friendly.

W AT E R

Patented Electro Magnetic Firing (EMF) system

H O T

HSP-3504-3MGH

Direct drive triplex piston AR pump Pump: Stainless-steel and brass unloader valve · Forged brass manifold · Thermal relief valve · Low pressure detergent injection Engine: Performance-proven engine with low-oil protection and recoil start Frame: Reinforced powder coated steel tube frame with center balanced lifting hook · Powder coated steel hose reel mounting bracket · Wand holder · Solid steel threaded axles · Four pneumatic tires with tubes · Locking tire brake Components: High quality fuel filter/water separator ensures clean fuel supply · Complete system diagnostic board · Pressure and high limit safety controls · No. 1 or No. 2 diesel or kerosene fired burner (Bio-fuel not approved at this time) · Polyethylene burner fuel tank · Easy coil drain helps prevent freezing in cold weather Unit Includes: 50-foot x 3⁄8-inch steel wire-braided pressure hose with screw connects, swivel and bend restrictors · Professional-grade insulated trigger gun with safety lockoff · Adjustable pressure insulated dual lance with 15-degree fixed and detergent nozzle Miscellaneous: Temperature rise 150°F/66°C above ambient, maximum outlet temperature is 200°F

Model No. PSI GPM Displacement/Engine HSP-2403-3MGH 2400 2.6 196cc Honda OHV HSP-2403-3MGR 2400 2.6 211cc Subaru OHC HSP-3003-3MGH 3000 2.9 270cc Honda OHV HSP-3003-3MGR 3000 2.9 265cc Subaru OHC HSP-3004-3MGH 3000 3.5 389cc Honda OHV HSP-3504-3MGH 3500 3.3 389cc Honda OHV HSP-3504-3MGR 3500 3.3 404cc Subaru OHV

20

Rain cap Electric start (battery included)

Mi-T-M Corporation

800-553-9053

TX-1004-W, TX-1304-W

www.mitm.com

PARTS & LABOR WARRANTY

YEAR LIMITED

SUBARU ENGINE WARRANTY

YEAR LIMITED

HONDA ENGINE WARRANTY

Puncture-proof tires

YEAR LIMITED

COIL WARRANTY

YEAR LIMITED

PUMP WARRANTY

Gas Tank Burner Fuel Burner Cap. Tank Cap. Fuel Cons. Dimensions (LxWxH) Ship Wt. 0.97 gallon 4.0 gallon 1.53 gph 38in.x30in.x38in. 385 lbs. 0.95 gallon 4.0 gallon 1.53 gph 38in.x30in.x38in. 385 lbs. 1.59 gallon 5.5 gallon 1.84 gph 43in.x30in.x41in. 530 lbs. 1.59 gallon 5.5 gallon 1.84 gph 43in.x30in.x41in. 530 lbs. 1.70 gallon 5.5 gallon 2.14 gph 43in.x30in.x41in. 551 lbs. 1.70 gallon 5.5 gallon 2.14 gph 43in.x30in.x41in. 551 lbs. 1.70 gallon 5.5 gallon 2.14 gph 43in.x30in.x41in. 551 lbs.

Options (Consult price list or www.mitm.com for more information on option descriptions and qualifying models) 20-9050 HX-0098

1 3 3 3 7 YEAR LIMITED

Net Wt. 269 lbs. 269 lbs. 407 lbs. 407 lbs. 428 lbs. 428 lbs. 428 lbs.


W AT E R P R E S S U R E

2900-watt generator delivers clean power to the burner

HS-3505-0MGH

2 2 3 3 3 7

YEAR LIMITED

YEAR LIMITED

PARTS & LABOR VANGUARD ENGINE HONDA ENGINE WARRANTY WARRANTY WARRANTY

YEAR LIMITED

COIL WARRANTY

YEAR LIMITED

KUBOTA ENGINE WARRANTY

Model No. HS-3005-0MGV HS-3006-0MDK^ HS-3008-0MGH HS-3505-0MDK^ HS-3505-0MGH# HS-3506-0MGH HS-4004-0MAH#+ HS-4005-0MDK^+

YEAR LIMITED

PUMP WARRANTY

PSI GPM 3000 4.8 3000 5.6 3000 7.8 3500 4.7 3500 4.7 3500 5.6 4000 4.0 4000 4.5

W A S H E R S

Heavy-duty powder coated 11⁄2-inch steel square tube frame

YEAR LIMITED

H O T

S TAT I O N A R Y / S K I D - M O U N T G A S O L I N E / D I E S E L - B E LT D R I V E

HS Series

Designed, manufactured and tested in the Mi-T-M tradition of quality, this heavy-duty belt drive series is the most popular choice for single- and dual-axle trailer-mount options.

Pump: Belt drive triplex piston General or AR pump with ceramic plungers · Factory preset unloader · Forged brass manifold · 80-mesh, high volume, stainless-steel screen inlet water strainer Engine: Industrial gasoline or diesel engines with electric start (battery included) Components: Pressure relief valve protects against excessive system pressure · No. 1 or No. 2 diesel or kerosene fired burner (Bio-fuel not approved at this time) · Polyethylene burner and engine fuel tanks · 1⁄2-inch schedule 80-coil with stainlesssteel wrap · Heavy-duty dual cogged belt drive system · High quality fuel filter/ water separator ensures clean fuel supply Unit Includes: Quick connect nozzles (0°, 15°, 25° and 40°) · 50-foot x 3⁄8-inch steel wire-braided pressure hose with quick connects, swivel and bend restrictors · Professional-grade insulated trigger gun with safety lock-off · Adjustable pressure insulated dual lance with safety lock-off Miscellaneous: Temperature rise 150°F/66°C above ambient, maximum outlet temperature is 200°F

Displacement/ HP/Engine 480cc Vanguard OHV 15.5 HP Kubota 670cc Honda OHV 15.5 HP Kubota 614cc Honda OHV 670cc Honda OHV 614cc Honda OHV 15.5 HP Kubota

Fuel Tank Burner Fuel Burner Cap. Tank Cap. Fuel Cons. Dimensions (LxWxH) Ship Wt. 10.0 gallon 10.0 gallon 3.37 gph 50in.x34in.x46in. 816 lbs. 10.0 gallon 10.0 gallon 3.37 gph 56.5in.x34in.x46in. 940 lbs. 10.0 gallon 10.0 gallon 3.67 gph 50in.x34in.x46in. 854 lbs. 10.0 gallon 10.0 gallon 3.37 gph 56.5in.x34in.x46in. 940 lbs. 10.0 gallon 10.0 gallon 3.37 gph 50in.x34in.x46in. 854 lbs. 10.0 gallon 10.0 gallon 3.37 gph 50in.x34in.x46in. 864 lbs. 10.0 gallon 10.0 gallon 3.37 gph 50in.x34in.x46in. 854 lbs. 10.0 gallon 10.0 gallon 3.37 gph 56.5in.x34in.x46in. 940 lbs.

^Diesel unit. #Model equipped with AR pump, all other models equipped with General pumps. +Model equipped with trapping unloader, all other models equipped with K7 flow actuated unloader.

Net Wt. 710 lbs. 836 lbs. 750 lbs. 836 lbs. 750 lbs. 760 lbs. 750 lbs. 836 lbs.

Options (Consult price list or www.mitm.com for more information on option descriptions and qualifying models)

20-1070A18 Removable painted front panel HX-0144, HX-0202 Dual gun (requires trapping unloader) HX-0130 Three-way ball valve HX-0145 Adjustable temperature control HX-0131 High pressure detergent injection (K7) HX-0146 Hour meter HX-0133, HX-0135 & HX-0136 Steam combination 250°F (K7) HX-0147 Four (4) point lifting capability HX-0138 - HX-0142 Steam combination 250°F (requires trapping unloader) HX-0148 Detergent (requires trapping unloader) HX-0143, HX-0200 Trapping unloader AW-5740-0000 Wheel kit Note: To order options HX-0138 to HX-0142, HX-0144, HX-0148 or HX-0202 you must order option HX-0143 or HX-0200 (not required for 4000-PSI models, which already come equipped with trapping unloader). www.mitm.com

800-553-9053

Mi-T-M Corporation

21


HG Series

Belt drive triplex ceramic plunger General pump

P R E S S U R E

W A S H E R S

This stationary natural gas/LP unit offers the convenience of a steady fuel source the perfect pressure washer solution for wash bays.

S TAT I O N A R Y / S K I D - M O U N T N AT U R A L G A S / L P - B E LT D R I V E

W AT E R

Natural gas or LP gas-fired (vapor only) natural draft with aspirating-type burner, 10-inch stack

H O T

HG-3004-3460

Pump: Factory preset trapping unloader · Thermal relief valve · Adjustable high pressure detergent injection Motor: Open drip-proof motor with manual thermal overload protection Frame: Powder coated steel side panels and frame Components: Pressure switch and over-pressure safety controls · 24-volt control system · Polyethylene float tank (4-gallon with in-line screen filter) · 1⁄2-inch schedule 80-coil heat exchanger · Adjustable thermostat · Electronic ignition with standing pilot light Unit Includes: Quick connect nozzles (0°, 15°, 25° and 40°) · 50-foot x 3⁄8-inch steel wire-braided pressure hose with quick connects, swivel and bend restrictors · Professional-grade insulated trigger gun with safety lock-off · Adjustable pressure insulated dual lance with fixed detergent nozzle Miscellaneous: Maximum outlet temperature is 200°F (250°F/121°C outlet temperature with steam option) · 338,000-BTU per hour - Natural gas · 326,000-BTU per hour - LP gas (vapor only)

Model No. HG-2004-1208 HG-2004-3208 HG-2004-1230 HG-2004-3230 HG-2004-3460 HG-3004-1208 HG-3004-3208 HG-3004-1230 HG-3004-3230 HG-3004-3460 HG-3004-3575

PSI 2000 2000 2000 2000 2000 3000 3000 3000 3000 3000 3000

GPM 4.2 4.2 4.2 4.2 4.2 3.9 3.9 3.9 3.9 3.9 3.9

HP/Motor 6.0 HP/208V, 1Ø, 28.2A 6.0 HP/208V, 3Ø, 18.5A 6.0 HP/230V, 1Ø, 25.5A 6.0 HP/230V, 3Ø, 16.0A 6.0 HP/460V, 3Ø, 8.0A 8.0 HP/208V, 1Ø, 40.5A 8.0 HP/208V, 3Ø, 23.0A 8.0 HP/230V, 1Ø, 37.0A 8.0 HP/230V, 3Ø, 20.0A 8.0 HP/460V, 3Ø, 10.0A 8.0 HP/575V, 3Ø, 8.0A

21-inch draft diverter included; has 10-inch opening

1 2 3 7 YEAR LIMITED

ELECTRIC MOTOR WARRANTY

YEAR LIMITED

COIL WARRANTY

Dimensions (LxWxH) Ship Wt. Net Wt. 56.5in.x29in.x49.75in. 844 lbs. 724 lbs. 56.5in.x29in.x49.75in. 844 lbs. 724 lbs. 56.5in.x29in.x49.75in. 844 lbs. 724 lbs. 56.5in.x29in.x49.75in. 844 lbs. 724 lbs. 56.5in.x29in.x49.75in. 844 lbs. 724 lbs. 56.5in.x29in.x49.75in. 878 lbs. 758 lbs. 56.5in.x29in.x49.75in. 878 lbs. 758 lbs. 56.5in.x29in.x49.75in. 878 lbs. 758 lbs. 56.5in.x29in.x49.75in. 878 lbs. 758 lbs. 56.5in.x29in.x49.75in. 878 lbs. 758 lbs. 56.5in.x29in.x49.75in. 878 lbs. 758 lbs.

Options (Consult price list or www.mitm.com for more information on option descriptions and qualifying models) HX-0104, HX-0112 K7 unloader (flow activated) (auto start/stop N/A) HX-0110 HX-0105 Liquid propane (vapor only) HX-0111 HX-0106 Hour meter HX-0120, HX-0121 HX-0107 Time delay shutdown HX-0124 HX-0108 (1) Remote station (auto start/stop N/A) HX-0109 Time delay shutdown and first remote box (kit option) Note: You cannot order HX-0107 & HX-0108 together, you will need to order HX-0109 instead. HX-0107 & HX-0108 can be ordered separately. 22

Mi-T-M Corporation

800-553-9053

www.mitm.com

Additional remotes (up to 3) Auto start/stop 250°F steam upgrade Auto start/stop and first remote option

YEAR LIMITED

PARTS & LABOR WARRANTY

YEAR LIMITED

PUMP WARRANTY

Certified for 0 to 2000feet above sea level

See HGM Series for Installation Recommendations


H O T

S TAT I O N A R Y - N AT U R A L G A S / L P H E AT E R M O D U L E

W AT E R

HGM Series

Want to turn up the temperature on your Mi-T-M cold water pressure washer? This natural gas/LP heater module is the perfect add-on to the cold water washer you already have in operation.

P R E S S U R E

Natural gas or LP gas-fired natural draft with aspirating-type burner; 12-inch stack (HGM-3506 has 10-inch stack)

W A S H E R S

24-inch draft diverter included; has 12-inch opening (HGM-3506 has a 21-inch draft diverter with 10-inch opening) HGM-3506-0E10 shown with JP-2703-0MHB

Fork truck accessible

Frame: Powder coated frame assembly Components: Pressure relief valve · 24-volt control system · 1⁄2-inch schedule 80-vertical coil assembly · Quality gas valve with regulator (max. input 1⁄2-PSI) · Inlet and outlet quick connects · Electronic ignition with standing pilot · On/off burner switch and adjustable thermostat Unit Includes: 12-foot x 1⁄2-inch jumper hose with quick connects included (to hook up to existing pressure washer) (HGM-3506 has 3⁄8-inch jumper hose) Miscellaneous: Incoming power 120-volt, single-phase Natural Gas Installation Recommendation Mi-T-M's natural gas pressure washer must have a clearance of 2-feet on all sides of the unit and 4-feet above the unit. Gas Supply Line Natural Gas 7 to 8-inch water column input LP Gas 12 to 14-inch water column input Recommended Pipe Sizes for Gas Supply Line Distance to Unit From Regulator Pipe Size Natural Gas 0 to 50-feet 11⁄2-inch 1PS 50 to 100-feet 2-inch 1PS 100 to 200-feet 21⁄2-inch 1PS

1 3 YEAR LIMITED

PARTS & LABOR WARRANTY

YEAR LIMITED

COIL WARRANTY

Distance to Unit From Regulator LP Gas 0 to 50-feet 50 to 100-feet 100 to 200-feet

Pipe Size 1-inch 1PS 11⁄2-inch 1PS 13⁄4-inch 1PS

Model No. Max. PSI Max. GPM Natural Gas BTU LP-Gas BTU Dimensions (LxWxH) Ship Wt. Net Wt. HGM-3506-0E10 3500 6.0 338,000 per hour 326,500 per hour 24.25in.x26.25in.x49.75in. 446 lbs. 326 lbs. HGM-3508-0E10 3500 8.0 650,000 per hour 619,500 per hour 34.5in.x34.75in.x54.5in. 767 lbs. 707 lbs. Options (Consult price list or www.mitm.com for more information on option descriptions and qualifying models) HX-0105, HX-0180 HX-0116, HX-0188 HX-0129

Liquid propane (vapor only) Stainless-steel coil wrap 460V incoming power

HX-0177 HX-0186 HX-0215

575V incoming power Modulating thermostat 230V incoming power

www.mitm.com

800-553-9053

Mi-T-M Corporation

23


Designs

W A S H E R S P R E S S U R E

HSE SERIES BURNER DESIGN 1. Large capacity exhaust tubes allow proper exhausting of combustion gases. 2. When troubleshooting a burner problem, the spark can easily be checked within seconds through the convenient sight glass. 3. Continuous wrap tubing coil eliminates butt welds which can cause leaks. The coil is lightweight and designed for easy replacement and durability. 4. The insulation pad is designed for easy replacement and durability. 5. Coil inlet/outlet connections with convenient coil drain, allows for easy draining of all water in coil to prevent freezing. 6. The combustion chamber drain allows for easy draining of water or fuel build-up. 7. With Mi-T-M's triple air flow design, the temperatures on the outer wrap are kept low enough to eliminate the need for coil insulation. This also increases the efficiencies of the fuel being burned by the ignition on the down flow and the exhaust on the up flow of the burner chamber. 8. Single wire-braided fuel hose prevents leakage, protects the system and won't crack or kink. 9. Electrodes and nozzle assembly are at top of burner for easy maintenance and troubleshooting.

I

B

J

C D

H O T

W AT E R

BURNER DESIGN & ELECTRO MAGNETIC FIRING SYSTEM

H E

G

F

H S P S E R I E S P AT E N T E D E M F S Y S T E M In 1999, Mi-T-M Corporation received the patent for a unique ignition/firing system, Electro Magnetic Firing (EMF), which produces enough voltage for operation and proper burning of the HSP series of hot water pressure washers.

B H

This system is designed with two sets of magnets that are used to produce electricity. The first set of magnets produces a low voltage of about 12 to 14 volts when passed by a coil known as a stator. This voltage is required for operation of the on/off switch, pressure and high limit switch, and the fuel solenoid. The second set of magnets passes by an ignition coil which produces a high voltage in the tens of thousands of volts. The spark is generated across the electrode gap and is enough to create proper ignition of either #1 diesel, #2 diesel or kerosene. 1. Engine sheave, dual set screw mount, maintains proper alignment of pump shaft key. 2. The belt tension sheave creates proper belt tension so fuel pump discharges fuel upon demand. 3. The long lasting, non-corrosive flexible drive coupler protects EMF system if fuel pump locks up. 4. Fuel pump is a durable high quality pump that will deliver No. 1 or No. 2 diesel fuel or kerosene. 5. Stator coil/magnets are a low maintenance system that provide solenoid control voltage. 6. Fan provides burner air for proper combustion and clean exhaust smoke. It has an easily accessible air flow control. 7. Ignition coil provides voltage to electrodes for proper spark voltage, allowing accurate ignition of fuel every time the trigger is pulled. The ignition coil has a long life, is easily replaced and has a proven track record in the industry.

C

D

E

24

Mi-T-M Corporation

800-553-9053

www.mitm.com

F G EMF system eliminates the need for a 12V battery.


Clean large surfaces faster and easier than with a standard cleaning nozzle. The Mi-T-M rotary surface cleaners are equipped with strong-bristled brushes for long life and easy glide control. This cleaning accessory can be used on decks, patios, sidewalks, driveways, pool decks, parking lots, and any other horizontal surface. AW-7020-8000 - 18-inch diameter - 4000-PSI rated - Heavy-duty, lightweight aluminum portable handle - Heat-treated sealed pressure swivel - requires no maintenance - 212°F maximum temperature - 3.0 to 10.0-GPM water volume AW-7020-8001 - 28-inch diameter - 4000-PSI rated - Lightweight, portable frame with walk-behind design - Large wheels for mobility - Professional-grade aluminum housing - Heat-treated sealed pressure swivel - requires no maintenance - 212°F maximum temperature - 3.0 to 10.0-GPM water volume AW-7020-8002 - 20-inch diameter - 4000-PSI rated - Heavy-duty anodized aluminum handle - Professional-grade high pressure trigger gun - Heat treated unsealed pressure swivel - requires maintenance - 200°F maximum temperature - 3.0 to 8.0-GPM water volume

AW-7020-8002

*Consult factory for correct orifice size

25°

W A S H E R S

Rotary Surface Cleaners

Rotating nozzles increase your cleaning power and decrease your cleaning time. They offer 0° spray impact with 25° coverage. Nozzles include filter with quick connect and offer heavy-duty components for long life and reliability. Can be used on sidewalks, driveways, track vehicles, muddy areas, old peeling paints and concrete surfaces. AW-7004-Series* - 6000-PSI maximum rating - 212° temperature rating AW-7300-Series* - 3600-PSI maximum rating - 190° temperature rating AW-7500-Series* - 6000-PSI maximum rating - 212° temperature rating

P R E S S U R E

Rotating Nozzles

Accessories

S U R FA C E C L E A N E R S NOZZLES - BRUSH

From tips to extended-reach wands, pump oil to heavy-duty degreasers and everything in between, Mi-T-M is a one-stop shop for all your cleaning accessory needs.

Rotating Nozzle

Rotating Brush

The rotating brush offers low pressure rotation for hard to remove debris on sensitive surfaces. Can be used on painted surfaces, fiberglass, wood or brick. AW-7003-1500 - Natural hair bristles - Quick connect - Adjustable angle - 3.0 to 6.0-GPM flow rate - 176° temperature rating - Can be used with low pressure detergent injector

AW-7020-8000

3500 PSI

AW-7020-8001

www.mitm.com

800-553-9053

Mi-T-M Corporation

25


Accessories

W A S H E R S P R E S S U R E

D E T E R G E N T S - P U M P O I L - P U M P S AV E R PUNCTURE-PROOF TIRES - ROLL CAGES

Detergents

All Purpose Cleaner The most versatile and efficient all-around cleaner. Use all purpose cleaner on vehicles, glass, stainless-steel, aluminum, painted surfaces and lawn equipment. AW-4018-0026 (1-gallon, 4 per case) AW-4018-0005 (5-gallon) AW-4018-0055 (55-gallon) - Environmentally friendly, will not harm plants, biodegradable - Indoor and outdoor use - Hard water stable prevents spotting Deck & House Wash Deck & House wash removes mildew and dirt. It is recommended for decks, homes and wooden surfaces. AW-4034-0026 (1-gallon, 4 per case) AW-4034-0005 (5-gallon) AW-4034-0055 (55-gallon) - Environmentally friendly, will not harm plants, biodegradable - Hard water stable prevents spotting Heavy-Duty Degreaser Heavy-duty degreaser is great for the removal of oil and grease. It is capable of handling all your equipment and automotive cleaning needs. AW-4059-0026 (1-gallon, 4 per case) AW-4059-0005 (5-gallon) AW-4059-0055 (55-gallon) - Contains rust inhibitors to reduce corrosion - Hard water stable prevents spotting

Puncture-Proof Tires

Pump Oil

Mi-T-M's pump oil offers trouble-free performance with no lubricant related failures. Our pump oil is specially designed for pressure washer pumps. It will keep pumps cooler than regular oil and is suitable for all climates. AW-4085-0016 (1-pint, 6 or 12 per case) - Convenient pour spout and resealable cap - Contains rust and corrosion additives, anti-wear additives, foam suppressant and dispersant for system cleanliness

These tires are flat-free and maintenance-free. 10-inch Tires 13-inch Tires TX-1002-W (Two tires) TX-1302-M (Two tires) TX-1004-W (Four tires) TX-1304-M (Four tires) - 10-inch tire - 13-inch tires - White hub - White hub - Consult factory before ordering - Fits CW Premium and CWC Series 13-inch Tires - Consult factory before ordering TX-1302-W (Two tires) TX-1304-W (Four tires) - 13-inch tire - White hub - Consult factory before ordering

Pump Saver

Roll Cage

Pump saver provides longer pump life, prevents harmful build-up of hard water mineral deposits, preserves seals and pistons and protects against freezing for safe, cold weather storage. AW-4070-0004 (6-oz.) - For use with all pressure washers - Protects pressure washer when not in use

26

Mi-T-M Corporation

800-553-9053

www.mitm.com

Designed to protect cold water pressure washers CX-0054 (Fits CW Premium Series with Honda and Subaru engines) CX-0055 (Fits CW-4004-3MV0) CX-0056 (Fits CW-3004-4MDY) - Lifting hook - 11â „4-inch powder coated steel tubing - Retro-fits to existing frame


Digital Hour Meter/ Tachometer 32-0416 - Simple hour meter with tachometer - Updates every 3 seconds - RPM to 9,900

Extension Hoses

High Pressure Detergent Injector

With the high pressure detergent injector, large tasks become small. High pressure washer mixes with detergent to clean even the heaviest build-up. Can be used on farm equipment, tractor trailers, RVs and bridges. 50-0161 - Brass and stainless-steel construction - 2.0-GPM minimum operating capacity - 6.0-GPM maximum operating capacity - Steel mesh in-line water strainer

Sand Injectors

Wet sandblasting is efficient and dust-free. Remove coatings from steel and concrete surfaces. Can be used on rust, paint, stains, and graffiti. AW-3000-0000 (Carbide tip) AW-3020-0000 (Ceramic tip) - Includes sand probe and clear hose - Consult factory before ordering

When you need extra mobility and length. Cold Water 851-0006 (4000-PSI) 851-0317 (5000-PSI) 851-0338 (4000-PSI) 851-0362 (6000-PSI) - 50-foot x 3⁄8-inch I.D. - Non-marking - Includes quick connects, swivel and bend restrictors - Chemical resistant - Wire-braided 15-0006 (Industrial water supply) - 50-foot x 3⁄4-inch Hot Water 15-0077 (Steam combination, 3000-PSI) 850-0174 (2500-PSI & HSP Models) 850-0199 (4000-PSI & HSP Models) - 50-foot x 3⁄8-inch I.D. - Includes screw connects, swivel and bend restrictorsw 15-0146 (3000-PSI, 50 foot x 3⁄8-inch) 15-0160 (4500-PSI, 75 foot x 3⁄8-inch) 15-0161 (4500-PSI, 100 foot x 3⁄8-inch) 15-0162 (4500-PSI, 150 foot x 3⁄8-inch) 15-0163 (4500-PSI, 200 foot x 3⁄8-inch) - 3⁄8-inch male swivel - For use with hose reels

W A S H E R S

The low pressure detergent injector allows you to apply recommended detergents. Can be used on cars, boats, vans and engines. AW-8400-0021 (2000 to 4000-PSI) AW-8000-0001 (5000-PSI) - Adjustable chemical draw - Clear, pliable detergent nozzle - Solid brass body with stainless-steel orifice for durability - Quick connects for easy installation

P R E S S U R E

Low Pressure Detergent Injectors

Accessories

INJECTORS - NOZZLE - HOUR METER - HOSES

15-0006, 15-0077, 15-0146, 850-0174, 850-0199, 851-0006, 851-0317, 851-0338, 851-0362 15-0160 15-0161 15-0162

Long Range Chemical Nozzle 18-0373 - Quick connects to the end of the wand - Low pressure - Has a range of 30-feet while drawing chemical

15-0163 50-ft.

75-ft.

100-ft.

www.mitm.com

150-ft.

800-553-9053

200-ft.

Mi-T-M Corporation

27


Accessories

W A S H E R S P R E S S U R E

HOSE REELS

Hose Reels

Hose reels are convenient for the storage of hoses. Reel capacities based on R1 Mi-T-M hoses. 50-0136 (13-inch reel, 100-foot maximum hose length) 50-0137 (16-inch reel, 200-foot maximum hose length) 50-0164 (13-inch reel without swivel, 100-foot maximum hose length) 50-0165 (16-inch reel without swivel, 200-foot maximum hose length) - Frame mount - 360째 pivoting action on 50-0136 & 50-0137 hose reels - Non-pivoting action on 50-0164 & 50-0165 hose reels - Easy mount bracket design - Clean hands hose guide - Live system Note: Hose reels 50-0164 & 50-0165 must be mounted with 50-0172 (45째 bracket). Also, 23-0307 (elbow) and 23-0243 (reducer) are required for jumper hose mounting.

G

B

B E F D

B

C

AW-0050-0138 Bracket - Universal mount (HS Series)

50-0139 Bracket - Wall mount (HG Series)

C

D 50-0140 Bracket - Bar 29-inch (CWC Series)

Mi-T-M Corporation

800-553-9053

50-0172 Bracket - 45째 for mounting reels without swivel 23-0307 Elbow

23-0243 Reducer

28

13-0175A01 Bracket - Cold water base mount (JCW & CW Series)

www.mitm.com

G

E F G

Jumper Hoses 852-0138 Screw connect, 40-inch (HSP & Large HSE Series) 852-0139 Quick connect, 40-inch (Cold water) 852-0161 Screw connect, 57-inch (Small HSE Series) 850-0278 Quick connect, 85-inch (HS Series)


Pressure Washer Replacement Parts Kit Everything you need to keep your pressure washer up and running. See chart for part numbers needed to order the kit. - Secure case locking system to keep lid latched and parts secure - Diagram card includes Mi-T-M part numbers for quick reorder reference - Lid hinges to reveal kit components and location - Storage compartments with adjustable plastic separators, keeps all parts organized for easy access - Durable case is made of heavy plastic to withstand abuse

Includes a parts chart that fits into the plastic lid with a numbered diagram for identification. Also includes an application chart for easy part recognition and unit capability.

AW-7015-1200

W A S H E R S

Clean hard to reach places by using extended reach wands. Can be used on siding, house eaves, farm equipment, semi-tractor trailers and multi-story buildings. Fiberglass Wand AW-7015-1200 (12-foot) AW-7015-1800 (18-foot) AW-7015-2400 (24-foot) - Professional-grade trigger gun with safety lock-off - Complete with quick connects - Extends from 6-feet to 12, 18 or 24-feet - Lightweight and easy to control - Compatible with all makes of pressure washers rated up to 3500-PSI - Easy hose retraction Aluminum Wand AW-7014-1800 (18-foot) AW-7014-2400 (24-foot) - Professional-grade trigger gun with safety lock-off - Complete with quick connects - Extends from 6-feet, 5-inches to 18 or 24-feet - Push-button locks - Compatible with all makes of pressure washers rated up to 4000-PSI - Includes belt for additional support Telescoping Wand Belt Telescoping wand belt holds telescoping wands, reduces fatigue and strain. Provides better operator control, optimizing cleaning performance. AW-7015-0001 - Works with AW-7015 and AW-7014 telescoping wands - Includes three plastic snap-on clips that snaps to your shoulder, waist and the wand

P R E S S U R E

Extended Reach Wands

Accessories

E X T E N D E D R E A C H W A N D S - R E P L A C E M E N T PA R T S K I T

AW-7014-1800

AW-7015-0001 wand belt

AW-7014-1800 Aluminum wand shown with AW-7015-0001 wand belt Kit Includes: Part No. Description Quantity 17-0001 1⁄4F x 1⁄4 socket 2 17-0002 1⁄4M x 1⁄4 plug 2 17-0004 3⁄8F x 3⁄8 socket 2 17-0005 3⁄8M x 3⁄8 plug 2 17-0006 3⁄8F x 3⁄8 plug 2 17-0007 3⁄8M x 3⁄8 socket 2 17-0028 1⁄4M x 1⁄4 socket 2 17-0029 1⁄2M x 3⁄8 socket 2 18-0028 4.0 orifice, 0° (red) 2 18-0029 4.0 orifice, 15° (yellow) 2 18-0030 4.0 orifice, 25° (green) 2 18-0031 4.0 orifice, 40° (white) 2 18-0257 3.5 orifice, 0° (red) 2 18-0258 3.5 orifice, 15° (yellow) 2 18-0259 3.5 orifice, 25° (green) 2 18-0260 3.5 orifice, 40° (white) 2 18-0302 3.0 orifice, 0° (red) 2 18-0150 3.0 orifice, 15° (yellow) 2 18-0303 3.0 orifice, 25° (green) 2 18-0304 3.0 orifice, 40° (white) 2 18-0148 65° chemical injector nozzle 2 19-0050 Chemical injector strainer 2 25-0122 O-ring seal (tips) 10 25-0123 O-ring seal (3⁄8-inch quick connect) 10 62-0174 Replacement parts box 1

www.mitm.com

800-553-9053

Mi-T-M Corporation

29


Accessories

W A S H E R S P R E S S U R E

D I S P L AY R A C K S

Equipment Display Rack

This equipment display rack is a perfect way to present Mi-T-M industrial equipment to your customers. Compact yet strong enough to hold direct drive pressure washers, 5-gallon air compressors and inverter generators. The upright design offers great visibility to showcase each of the products it holds without using a lot of valuable floor space. AW-9300-0018 (3-tier powder coated display rack) 41-0466 (Product display signs; Includes 1 of each: 5-gallon air compressors, inverter generators and direct drive pressure washers) 64-6043 (Acrylic literature holder) 64-6044 (Industrial equipment pocket guides; 25 pack) - Three-tier equipment display rack - Durable powder coated steel frame - Mesh powder coated steel shelves to hold equipment - Includes literature holder for Mi-T-M pocket brochures - Display signs included Rack Dimensions: Rack Assembly 26.81in. W x 43.0in. D x 69.75in. H Shelf Dimensions: Top Shelf 24in. W x 20.875in. D Middle Shelf 24in. W x 31.25in. D Bottom Shelf 24in. W x 42.625in. D

Product Display Rack

Equipment Display Risers

These display risers are the perfect way to elevate Mi-T-M industrial equipment. Compact and sturdy to hold air compressors, generators, pressure washers, space heaters and wet/dry vacuums. Stackable for multi-level displays of your Mi-T-M equipment. AW-9300-0019 (Powder coated display riser; 26in. W x 26in. D x 12in. H) - Durable wrinkle-finish powder coated steel frame and top - Occupies a modest amount of valuable floor space - Stackable design for grouped displays at various heights - Raises equipment off of floor - Heavy-duty base construction

*Units sold separately *Units sold separately

Compact display rack solves your limited retail floor space issues. AW-9300-0013 (Display rack; includes header card, magnets and literature holder) AW-0013-0154 (Display shelves; 2 maximum) 13-0176A18 (Generator stop bracket; 4 max.) - Easy-to-assemble - Requires only 15-square-feet of floor space - Constructed of powder coated metal square tubing - Dim.: 61in. W x 36in. D x 62in. H

Equipment Rental Rack

Compact display rack solves your limited retail floor space issues. AW-9300-0029 (Display rack) 41-0485 (Pressure washer rental sign) 64-6044 (Industrial equipment pocket guides; 25 pack) 64-6057 (Acrylic literature holder) - Easy-to-assemble - Requires only 71â „2-square-feet of floor space - Constructed of powder coated metal square tubing - Can hold up to 18 1-gallon detergent bottles - Erasable area for half and full day rental price or purchase price - Includes literature holder for Mi-T-M pocket brochures - Dim.: 27in. W x 42in. D x 40in H *Detergent and unit sold separately

*Units sold separately 30

Mi-T-M Corporation

800-553-9053

www.mitm.com


Nozzles

O-rings

Gun & Wand

Fittings

O-rings ensure a tight fit and prevent leaks with quick connect sockets. AW-0025-0122 (3⁄8-inch x 9⁄16-inch) AW-0025-0123 (1⁄2-inch x 11⁄16-inch) - 10 per pack

AW-0025-0122

Pressure Washer Replacement Parts Rack Customized to meet your customer needs. AW-9300-0001 - Increase profit margins - Laser cut logo - Powder coated steel frame - Versatile peg and grid system keeps parts coordinated for easy access - Store your Mi-T-M pump oil on a powder coated steel tray - Convenient floor tray holds your Mi-T-M replacement hoses - Dim: 73in. H x 29.5in. W x 24.5in. D

*Parts sold separately

AW-0025-0122

Replacement gun and wand for continued cleaning capability. AW-0016-0001 (Trigger gun, rated up to 4000-PSI) AW-0851-0096 (36-inch wand assembly, includes quick connect socket)

W A S H E R S

Add the ability to easily connect and disconnect your pressure washer wands and hoses. AW-0017-0001 (1⁄4F x 1⁄4 socket) AW-0017-0002 (1⁄4M x 1⁄4 plug) AW-0017-0004 (3⁄8F x 3⁄8 socket) AW-0017-0005 (3⁄8M x 3⁄8 plug) AW-0017-0002 AW-0017-0006 (3⁄8F x 3⁄8 plug) 1 1 AW-0017-0028 ( ⁄4M x ⁄4 socket) AW-0017-0029 (1⁄2M x 3⁄8 socket) - Quick connect AW-0017-0035 (M22 x 3⁄8 FNPT, 2-piece) - Screw connect AW-0023-0017 (3⁄8M x 1⁄4F adapter) AW-0023-0410 (3⁄8M x 1⁄4BSP-F adapter) AW-0024-0251 (3⁄8M x 1⁄4BSP-M adapter) AW-0017-0035

Quick connect nozzles give the user a choice of spray angles for precise cleaning power. Individual Nozzles - Available in 0°, 15°, 25° and 40° - Available in orifice size 3.0, 3.5, 4.0 and 4.5 - Quick connect - Consult factory for nozzle size needed Back view of 3-Pack Nozzles accessory packaging - Sold in packs of three: 0°, 15°, 25° and 40° - Available in orifice size 3.0, 3.5, 4.0, 4.5, 5.0, 5.5, 6.0, 6.5 and 7.0 - Quick connect - Consult factory for nozzle size needed 4-Pack Nozzles - Sold in packs of four: 0°, 15°, 25° and 40° - Available in orifice size 3.0, 3.5, 4.0, 4.5, 5.0, 5.5, 6.0, 6.5 and 7.0 - Quick connect - Consult factory for nozzle size needed 4-Pack Nozzles AW-0018-0148 (65° Detergent nozzle) (0, 15, 25 and 40-degrees) - Sold individually

P R E S S U R E

PA C K A G E D A C C E S S O R I E S A N D ACCESSORY RACKS

Accessories

Mi-T-M's accessory packaging program clearly identifies the part on the front of the card. The back of the card features the part number and where the part is used. Consult factory for more packaged accessories.

AW-0016-0001

Pressure Washer Replacement Parts Cabinet Maximize your Mi-T-M pressure washer accessory sales with this industrial quality point-of-sale cabinet. AW-9300-0015 (Display cabinet) 20-0886A18 (Wand display holder) 852-0177 ('Time to Reorder' cards) - Durable powder coated steel frame - Custom locks keep merchandise safe and secure - Handy reorder cards assist with inventory management - Versatile peg and grid system keeps parts coordinated for easy access - Attached extension wand dividers keep inventory organized - Convenient floor tray holds your Mi-T-M replacement hoses - Large enough to handle multiple quantities of inventory - Conveniently sized to occupy a modest amount of floorspace - Dim.: 65.25in. H x 29.75in. W x 24.5in. D

*Parts sold separately www.mitm.com

800-553-9053

Mi-T-M Corporation

31


Accessories

W A S H E R S P R E S S U R E

NE W TR AIL ER DE SIG NS

TRAILER UNITS

Single- & Dual-Axle Trailers

For the ultimate in portability: Purchase a single- or dual-axle trailer unit, add reliable Mi-T-M equipment to suit your application, and you are ready for the next job! Trailer units are used by heavy construction contractors, factories, well drillers, mines, military bases, road builders, contract cleaners, shipyards, municipalities and food services. Dual-Axle TandemTrailers Single-Axle Trailers AW-9000-0003 (With surge brakes and (2) 200-gallon water tanks) AW-9000-0005 (With surge brakes and 200-gallon water tank) AW-9000-0006 (With electric brakes and 200-gallon water tank) AW-9000-0004 (With electric brakes and (2) 200-gallon water tanks) - 5-foot x 81⁄2-foot trailer AW-9000-0007 (With 200-gallon water tank only) 1 - 3-inch x 41⁄4-inch angle frame - 5-foot x 8 ⁄2-foot trailer 1 7,000 gross vehicle weight - 3-inch x 4 ⁄4-inch angle frame (2) 3,500-lb. axles with brakes on both sides - 3,500 gross vehicle weight (4) ST205-75R 15-inch radial tires with 6-bolt white spoke rims - (1) 3,500-lb. axle (2) Tandem fenders - (2) ST205-75R 15-inch radial tires with white spoke rims 2 5⁄16-inch coupler with 14,000 lb. capacity - (2) fenders - Swivel jack with pad - 2-inch coupler - Rubber mounted sealed lights - Swivel jack with pad - Tanks are enclosed in a powder coated steel frame - Rubber mounted sealed lights - 5-foot x 4-foot x 12-inch storage area located under water tanks, - Tanks are enclosed in a powder coated steel frame access doors located at back of trailer - Pressure washers sit on solid 1⁄4-inch steel base (will fit all - Pressure washers sit on solid 1⁄4-inch Mi-T-M pressure washers) steel base (will fit all - Aluminum treadplate steps for access to water tanks Mi-T-M pressure washers) Options for Single-Axle Trailers - Aluminum treadplate steps for - Pressure washers access to water tanks - Hose reels - (2) 200-galllon tanks are plumbed together Options for Dual-Axle Trailers AW-9000-0003 has - Pressure washers storage area located under water tanks - Hose reels

AW-9000-0005 shown with optional HS-3505-0MGH hot water pressure washer and optional hose reels

High Pressure Hose Reel Options

These high pressure hose reel options are available for both single and dual-axle trailers. They include the hose reel with jumper hose and mounting bracket. TX-0001 (13-inch reel) TX-0002 (16-inch reel)

Low Pressure Hose Reel Options This low pressure hose reel option is available for both single and dual-axle trailers. It includes the hose reel with mounting bracket and plumbing. TX-0003 (16-inch reel) Note: 22-0136 back-flow preventor must be used with TX-0003, when used in California.

Replacement Hose Reel Parts

When adding hose reels to the single or dual-axle trailers, use the following jumper hose and mounting bracket. 15-0159 (Jumper hose) 13-0179A01 (Mounting bracket) 50-0136 (13-inch reel, 100-foot maximum hose length) 50-0137 (16-inch reel, 200-foot maximum hose length) 32

Mi-T-M Corporation

800-553-9053

www.mitm.com

AW-9000-0003 shown with optional HS-3505-0MGH hot water pressure washer and optional hose reels

Back-Flow Preventors

These back-flow preventors are required on trailer units in some states. 22-0136 (Use if a trailer has a hose reel for the supply) - Mounted on inlet side of trailer - To be used with TX-0003 Low pressure hose reel option TX-0005 (For use on HS Series models) - To be used on dual-axle trailers only - Removes float system, while adding the necessary plumbing - Water bypasses back to water tank TX-0007 (For use on HS Series models) - To be used on single-axle trailers only - Removes float system, while adding the necessary plumbing - Water bypasses back to water tank

Due to advancements in technology, the design of Mi-T-M trailers may change after the publication of this catalog.


S I N G L E

A N D

T W O

S TA G E

Air Compressors

In 2008, Mi-T-M began manufacturing air compressor vessels and soon after became a certified vessel testing facility. Mi-T-M is now authorized to apply the ASME mark of safety assurance on all vessels manufactured at our Peosta, Iowa facility.

5, 8, 20, 30, 80 OR 120-GALLON ELECTRIC - GASOLINE - DIESEL SINGLE PHASE- THREE PHASE H A N D C A R R Y - P O R TA B L E - S TAT I O N A R Y - B A S E M O U N T www.mitm.com

800-553-9053

Mi-T-M Corporation

33


5-Gallon

Quality single stage compressor with stainless-steel braided discharge hose

A I R

C O M P R E S S O R S

This electric air compressor is perfect for small, interior jobs. Gasoline models provide an easy solution for remote jobsite locations.

HAND CARRY - ELECTRIC/ G A S O L I N E - S I N G L E S TA G E

AC1-HE02-05M1

Regulator and two gauges for tank and outlet pressure

5-gallon powder coated tank assembly

AC1-HH04-05M

FEATURED ON ALL MODELS

Compressor Pump: Oil lubricated aluminum crankcase · Aluminum head for heat dissipation · Cast iron cylinder · Canister inlet air filter Frame: Compact and portable twin tank design · Powder coated steel frame design · Protective pump/motor housing · Rubber isolators Components: Drain valves and pressure relief valves

ELECTRIC MODEL

Motor: 120V single-phase 60-Hz. motor with 15-amp plug · Thermal overload motor protection

1 1 3 3 YEAR LIMITED

ELECTRIC MOTOR WARRANTY

Frame: Rubber handle for cushioned grip Components: Start/stop control set at 95 to 125-PSI · Quick connect fittings

YEAR LIMITED

GASOLINE MODELS

HONDA ENGINE WARRANTY

Engine: Honda OHV or Subaru OHC engine

YEAR

LIMITED WARRANTY

YEAR LIMITED

SUBARU ENGINE WARRANTY

Frame: Roll cage design · Double-handled carrying capability Components: Pneumatic throttle control · Start/stop control set at 95 to 125-PSI Model No. CFM @ 100 PSI HP/Motor AC1-HE02-05M1 4.1 2.0/120V, 14.0A Electric

Pump Plug Type Cast iron cylinder NEMA 5-15P

Dimensions (LxWxH) 20.5in.x15.5in.x17.5in.

Model No. CFM @ 100 PSI Displacement/Engine Pump Dimensions (LxWxH) Ship Wt. Net Wt. AC1-HH04-05M 4.4 118cc Honda OHV Cast iron cylinder 21.5in.x17.5in.x21.75in. 87 lbs. 79 lbs. AC1-HR45-05M 4.4 126cc Subaru OHC Cast iron cylinder 21.5in.x17.5in.x21.75in. 90 lbs. 82 lbs. Options (Consult price list or www.mitm.com for more information on option descriptions and qualifying models) 70-0357, 70-0380 Engine oil drain

34

Mi-T-M Corporation

800-553-9053

www.mitm.com

Ship Wt. Net Wt. 65 lbs. 56 lbs. NEMA 5-15P, 15-amp plug


A I R

P O R TA B L E - E L E C T R I C / G A S O L I N E - S I N G L E S TA G E

C O M P R E S S O R S

8-Gallon

Ideal for construction-duty applications that require additional holding capacity. Also perfect for use with multiple tools.

Quality cast iron single stage compressor with stainless-steel braided discharge hose

14-gauge powder coated two-piece belt guard with 1⁄4-turn release for quick access to belts AM1-PH65-08M

FEATURED ON ALL MODELS

Belt tightening system pulls engine straight to ensure constant belt alignment

Compressor Pump: Splash lubricated cast iron crankcase · Aluminum head for heat dissipation · Large canister intake filter Frame: Powder coated 8-gallon twin tank receivers · 7-gauge base plate to reduce vibration · Convenient lifting handles · Pneumatic tire with tube and steel hub Components: Regulator and two gauges for tank and outlet pressure · Manual drain valves for proper maintenance

1 2 2 3 3 YEAR LIMITED

ELECTRIC MOTOR WARRANTY

YEAR LIMITED

HONDA ENGINE WARRANTY

YEAR LIMITED

YEAR

LIMITED WARRANTY

PUMP EXCHANGE WARRANTY

YEAR LIMITED

SUBARU ENGINE WARRANTY

Electric Models

Best Pump Warranty in the Industry See p. 44 for details

ELECTRIC MODELS

Motor: Industrial UL-listed electric motor · Auto start/stop (continuous run optional) · Thermal overload protection Components: Industrial grade pressure switch · 10-inch fly wheel for extra cooling and longer life

GASOLINE MODELS

Engine: Industrial Honda OHV or Subaru OHC engine · Pneumatic idle control to conserve fuel Components: 12-inch fly wheel for extra cooling and longer life · Quality pilot valve unloader

Model No. CFM @ 100 PSI HP/Motor AM1-PE15-08M 6.5 1.5/120V, 13.2A Electric AM1-PE02-08M 8.4 2.0/120V, 18.8A Electric Model No. CFM @ 100 PSI Displacement/Engine AM1-PH65-08M 13.1 196cc Honda OHV AM1-PR07-08M 13.1 211cc Subaru OHC

NEMA 5-15P, 15-amp plug

NEMA 5-20P, 20-amp plug

Pump Cast iron Cast iron Pump Cast iron Cast iron

Plug Type NEMA 5-15P NEMA 5-20P

Dimensions (LxWxH) 44.5in.x18.5in.x25in. 44.5in.x18.5in.x25in.

Ship Wt. Net Wt. 190 lbs. 170 lbs. 190 lbs. 170 lbs.

Dimensions (LxWxH) Ship Wt. Net Wt. 44.5in.x18.5in.x27in. 200 lbs. 175 lbs. 44.5in.x18.5in.x27in. 200 lbs. 175 lbs.

Options (Consult price list or www.mitm.com for more information on option descriptions and qualifying models) 70-0357, 70-0380 Engine oil drain AX-0005 Dual control AX-0002 Auto drain plastic bowl Consult factory Cable throttle control AX-0004 Manual drain plastic bowl TX-1001-W Puncture-proof tire

www.mitm.com

800-553-9053

Mi-T-M Corporation

35


8-Gallon

Quality cast iron two stage compressor with venting system for reduced crankcase temperature and pressure

A I R

C O M P R E S S O R S

P O R TA B L E - G A S O L I N E - T W O S TA G E

An excellent choice for jobsite tasks requiring higher CFM and air capacity. These models are ideal for remote locations.

Stainless-steel braided discharge hose

Two pneumatic tires with tubes and steel hubs

AM2-PR09-08M

Compressor Pump: Splash lubricated cast iron crankcase · Cast iron head and cylinder for extended durability · Large canister intake filter

2 2 3 3

Engine: Industrial Honda OHV or Subaru OHC engine · Engine oil drain · Pneumatic idle control to conserve fuel

LIMITED WARRANTY

Frame: Powder coated 8-gallon twin tank receivers · 7-gauge base plate to reduce vibration · Convenient lifting handles · 14-gauge powder coated two-piece belt guard with 1⁄4-turn release for quick access to belts Components: Belt tightening system pulls engine straight to ensure constant belt alignment · Regulator and two gauges for tank and outlet pressure · 16.5-inch fly wheel for extra cooling and longer life · Manual drain valves for proper maintenance · Quality pilot valve unloader

Model No. CFM @ 175 PSI Displacement/Engine AM2-PH09-08M 17.2 270cc Honda OHV AM2-PR09-08M 17.2 265cc Subaru OHC

Pump Cast iron Cast iron

AX-0003 Consult factory TX-1002-W

36

Manual drain metal bowl Cable throttle control Puncture-proof tires

Mi-T-M Corporation

800-553-9053

www.mitm.com

PUMP EXCHANGE WARRANTY

YEAR LIMITED

YEAR LIMITED

HONDA ENGINE SUBARU ENGINE WARRANTY WARRANTY

Best Pump Warranty in the Industry See p. 44 for details

Dimensions (LxWxH) Ship Wt. Net Wt. 44in.x26in.x31in. 330 lbs. 260 lbs. 44in.x26in.x31in. 330 lbs. 260 lbs.

Options (Consult price list or www.mitm.com for more information on option descriptions and qualifying models)

YEAR LIMITED

YEAR


C O M P R E S S O R S

Quality cast iron two stage compressor

Belt tightening system pulls engine straight to ensure constant belt alignment (Also shown, engine oil drain system)

7-gauge base plate to reduce vibration AM2-SH09-B

2 2 2 3

YEAR LIMITED

YEAR

LIMITED WARRANTY

PUMP EXCHANGE WARRANTY

YEAR LIMITED

YEAR LIMITED

YANMAR ENGINE WARRANTY

A I R

S TAT I O N A R Y - B A S E M O U N T G A S O L I N E / D I E S E L - T W O S TA G E

Base-Mount

This base mounted air compressor is ideal for industrial duty and service truck applications. With it's rugged design it is perfect to use in remote locations.

HONDA ENGINE WARRANTY

Best Pump Warranty in the Industry See p. 44 for details

Model No. AM2-SH09-B AM2-SY09-B

Compressor Pump: Cast iron head and cylinder for extended durability · Splash lubricated cast iron crankcase · Stainless-steel braided discharge hose · Large canister intake filter Engine: Industrial Honda OHV gasoline engine or Yanmar diesel engine · Electric start standard · Pneumatic idle control to conserve fuel · Engine oil drain Frame: 14-gauge powder coated two-piece belt guard with 1⁄4-turn release for quick access to belts Components: 16.5-inch fly wheel for extra cooling and longer life

CFM @ 175 PSI Displacement/HP/Engine Pump 17.2 270cc Honda OHV Cast iron 16.9 9.0 HP Yanmar Cast iron

Dimensions (LxWxH) Ship Wt. Net Wt. 35in.x21.25in.x25.5in. 300 lbs. 255 lbs. 35in.x21.25in.x25.5in. 355 lbs. 305 lbs.

www.mitm.com

800-553-9053

Mi-T-M Corporation

37


20-Gallon

Quality cast iron single stage compressor

A I R

C O M P R E S S O R S

P O R TA B L E - G A S O L I N E - S I N G L E S TA G E

If storage capacity is what you need, then look no further. This single-stage model is portable and allows for a whopping 20-gallons of air storage capacity! The electric model is the perfect solution for service shops.

Regulator and two gauges for tank and outlet pressure

AM1-PE15-20M

Belt tightening system pulls engine straight to ensure constant belt alignment

FEATURED ON ALL MODELS

Compressor Pump: Splash lubricated cast iron crankcase · Aluminum head for heat dissipation · Stainless-steel braided discharge hose · Large canister intake filter Frame: Powder coated ASME coded 20-gallon receiver tank · 7-gauge base plate to reduce vibration · Convenient lifting handle · Two pneumatic tires with tubes and steel hubs Components: Belt tightening system pulls engine straight to ensure constant belt alignment · Manual drain valves for proper maintenance

ELECTRIC MODELS

Motor: Industrial UL-listed electric motor · Auto start/stop (continuous run optional) · Thermal overload motor protection Components: Industrial grade pressure switch · 10-inch fly wheel for extra cooling and longer life

GASOLINE MODELS

Engine: Industrial Honda OHV or Subaru OHC engine · Pneumatic idle control to conserve fuel Components: 12-inch fly wheel for extra cooling and longer life · Quality pilot valve unloader Model No. CFM @ 100 PSI HP/Motor AM1-PE15-20M 6.5 1.5/120V, 13.2A Electric AM1-PE02-20M 8.4 2.0/120V, 18.8A Electric Model No. CFM @ 100 PSI Displacement/Engine AM1-PH65-20M 13.1 196cc Honda OHV AM1-PR07-20M 13.1 211cc Subaru OHC

Pump Cast iron Cast iron Pump Cast iron Cast iron

Plug Type NEMA 5-15P NEMA 5-20P

38

Engine oil drain Auto drain plastic bowl Manual drain plastic bowl

Mi-T-M Corporation

800-553-9053

AX-0008 Consult factory TX-1002-W

www.mitm.com

ELECTRIC MOTOR WARRANTY

YEAR LIMITED

HONDA ENGINE WARRANTY

YEAR LIMITED

YEAR

LIMITED WARRANTY

PUMP EXCHANGE WARRANTY

YEAR LIMITED

SUBARU ENGINE WARRANTY

Electric Models

Best Pump Warranty in the Industry See p. 44 for details

Dimensions (LxWxH) 40in.x24in.x32in. 40in.x24in.x32in.

Ship Wt. Net Wt. 265 lbs. 196 lbs. 260 lbs. 198 lbs.

Dimensions (LxWxH) Ship Wt. Net Wt. 37in.x23.5in.x33in. 272 lbs. 212 lbs. 37in.x23.5in.x33in. 272 lbs. 212 lbs.

Options (Consult price list or www.mitm.com for more information on option descriptions and qualifying models) 70-0357, 70-0380 AX-0002 AX-0004

1 2 2 3 3 YEAR LIMITED

Dual control Cable throttle control Puncture-proof tires

NEMA 5-15P, NEMA 5-20P, 15-amp plug 20-amp plug


A I R

P O R TA B L E / S TAT I O N A R Y G A S O L I N E - T W O S TA G E

C O M P R E S S O R S

20-Gallon

For optimum performance and productivity select a portable or stationary 20-gallon unit for its high-volume air storage capacity and unparalleled reliability.

Quality cast iron two stage compressor with venting system for reduced crankcase temperature and pressure

Stainless-steel braided discharge hose

AM2-PH09-20M

Belt tightening system pulls engine straight to ensure constant belt alignment (Also shown, engine oil drain system) AM2-SR09-20M shown with optional electric start (AX-0042)

Compressor Pump: Splash lubricated cast iron crankcase · Cast iron head and cylinder for extended durability · Large canister intake filter

2 2 3 3

LIMITED WARRANTY

Engine: Industrial Honda OHV or Subaru OHC engine (Electric start optional) · Pneumatic idle control to conserve fuel · Engine oil drain

YEAR LIMITED

YEAR

PUMP EXCHANGE WARRANTY

YEAR LIMITED

Frame: Powder coated ASME coded 20-gallon receiver tank · 7-gauge base plate to reduce vibration · 14-gauge powder coated two-piece belt guard with 1⁄4-turn release for quick access to belts

YEAR LIMITED

Components: Regulator and two gauges for tank and outlet pressure · 16.5-inch fly wheel for extra cooling and longer life · Manual drain valves for proper maintenance · Quality pilot valve unloader

HONDA ENGINE SUBARU ENGINE WARRANTY WARRANTY

Best Pump Warranty in the Industry See p. 44 for details

PORTABLE MODELS

Frame: Convenient lifting handle · Two pneumatic tires with tubes and steel hubs Model No. CFM @ 175 PSI Displacement/Engine AM2-PH09-20M 17.2 270cc Honda OHV AM2-PR09-20M 17.2 265cc Subaru OHC AM2-SH09-20M^ 17.2 270cc Honda OHV AM2-SR09-20M^ 17.2 265cc Subaru OHC

Pump Cast iron Cast iron Cast iron Cast iron

Dimensions (LxWxH) Ship Wt. Net Wt. 46in.x26in.x39.5in. 375 lbs. 278 lbs. 46in.x26in.x39.5in. 367 lbs. 270 lbs. 37in.x18in.x38in. 355 lbs. 262 lbs. 37in.x18in.x38in. 367 lbs. 270 lbs.

^Stationary models.

Options (Consult price list or www.mitm.com for more information on option descriptions and qualifying models) AW-0007-0196 AX-0003 AX-0015, AX-0041 AX-0017, AX-0042

Rear lifting handle (N/A for models with electric start options or stationary models) Manual drain metal bowl Consult factory Cable throttle control Electric start (battery and cables not included) TX-1302-W Puncture-proof tires (portable models only) Electric start (battery and cables included)

www.mitm.com

800-553-9053

Mi-T-M Corporation

39


30-Gallon

Quality cast iron two stage compressor featured on both portable and stationary models

A I R

C O M P R E S S O R S

With 30-gallons of air capacity and portability built into one unit, you can expect great performance in the most demanding industrial applications.

P O R TA B L E - E L E C T R I C / G A S O L I N E / D I E S E L - T W O S TA G E

Stainless-steel braided discharge hose featured on both portable and stationary models

FEATURED ON ALL MODELS

AM2-PH13-30M comes standard with four pneumatic tires, roll cage and locking tire brake

Compressor Pump: Splash lubricated cast iron crankcase · Cast iron head and cylinder for extended durability · Large canister intake filter Frame: Powder coated ASME coded 30-gallon receiver tank · 7-gauge base plate to reduce vibration · Convenient lifting handle · Two pneumatic tires with tubes and steel hubs (389cc model comes standard with four pneumatic tires, roll cage and locking tire brake) · 14-gauge powder coated two-piece belt guard with 1⁄4-turn release for quick access to belts Components: Regulator and two gauges for tank and outlet pressure · 16.5-inch fly wheel for extra cooling and longer life · Manual drain valves for proper maintenance

ELECTRIC MODEL

Motor: Industrial UL-listed electric motor · Auto start/stop (continuous run optional) · Thermal overload motor protection · Magnetic starter Components: Industrial grade pressure switch

GASOLINE/DIESEL MODELS

Engine: Industrial Honda OHV, Subaru OHC gasoline engine or Yanmar diesel engine · Electric start optional · Engine oil drain · Pneumatic idle control to conserve fuel

1 1 2 2 2 3 3 YEAR LIMITED

ELECTRIC MOTOR WARRANTY

YEAR

YEAR

LIMITED WARRANTY

LIMITED WARRANTY

Diesel Model

Electric & Gasoline Models

YEAR LIMITED

YEAR LIMITED

PUMP EXCHANGE WARRANTY

YEAR LIMITED

YANMAR ENGINE HONDA ENGINE WARRANTY WARRANTY

YEAR LIMITED

SUBARU ENGINE WARRANTY

Electric Models

Best Pump Warranty in the Industry See p. 44 for details

Components: Quality pilot valve unloader Model No. CFM @ 175 PSI HP/Motor AM2-PE05-30M 16.9 5.0/230V, 20.0A Electric Model No. CFM @ 175 PSI Displacement/HP/Engine AM2-PH09-30M 17.2 270cc Honda OHV AM2-PR09-30M 17.2 265cc Subaru OHC AM2-PY09-30M 17.2 9.0 HP Yanmar AM2-PH13-30M 24.0 389cc Honda OHV

Pump Cast iron Pump Cast iron Cast iron Cast iron Cast iron

Plug Type NEMA 6-50P

Dimensions (LxWxH) 45in.x27in.x43in.

Dimensions (LxWxH) Ship Wt. Net Wt. 46in.x27.5in.x43in. 448 lbs. 355 lbs. 46in.x27.5in.x43in. 395 lbs. 302 lbs. 46in.x27.5in.x43in. 480 lbs. 430 lbs. 43.5in.x28in.x51in. 548 lbs. 468 lbs.

Options (Consult price list or www.mitm.com for more information on option descriptions and qualifying models) AW-0007-0196 Rear lifting handle (N/A for models with electric start options) AX-0016, AX-0017 AX-0001 Auto drain metal bowl AX-0040, AX-0042 AX-0003 Manual drain metal bowl AX-0020 AX-0004 Manual drain plastic bowl Consult factory AX-0009 Dual control TX-1302-W, TX-1304-W AX-0015, AX-0019, AX-0041 Electric start (battery and cables not included) 40

Mi-T-M Corporation

800-553-9053

www.mitm.com

Ship Wt. Net Wt. 503 lbs. 410 lbs. NEMA 6-50P, 50-amp plug

Electric start (battery and cables included) Electric start (battery and cables included) Roll cage with four wheels and brakes Cable throttle control Puncture-proof tires


A I R

S TAT I O N A R Y - E L E C T R I C / G A S O L I N E T W O S TA G E

C O M P R E S S O R S

30-Gallon

When high capacity air flow is required for the job, opt for the Mi-T-M stationary 30-gallon air compressor. The gasoline models are ideal for service trucks!

Belt tightening system pulls engine straight to ensure constant belt alignment featured on both portable and stationary models

AM2-SR09-30M

1 2 2 3 3 YEAR LIMITED

ELECTRIC MOTOR WARRANTY YEAR LIMITED

FEATURED ON ALL MODELS

YEAR

Compressor Pump: Splash lubricated cast iron crankcase · Cast iron head and cylinder for extended durability · Large canister intake filter

LIMITED WARRANTY

Frame: Powder coated ASME coded 30-gallon receiver tank · 7-gauge base plate to reduce vibration · 14-gauge powder coated two-piece belt guard with 1⁄4-turn release for quick access to belts

YEAR LIMITED

PUMP EXCHANGE HONDA ENGINE WARRANTY WARRANTY

Components: Regulator and two gauges for tank and outlet pressure · 16.5-inch fly wheel for extra cooling and longer life · Manual drain valves for proper maintenance

YEAR LIMITED

ELECTRIC MODELS

SUBARU ENGINE WARRANTY

Motor: Industrial UL-listed electric motor · Auto start/stop (continuous run optional) · Thermal overload motor protection · Magnetic starter

CSA Certified: AM2-SE05-30M AM2-S305-30M

Components: Industrial grade pressure switch

Best Pump Warranty in the Industry See p. 44 for details

Model No. CFM @ 175 PSI AM2-SE05-30M 16.9 AM2-S305-30M^ 16.9 AM2-SE75-30M 23.4 ^Three-phase unit.

NEMA L15-20P, 20-amp plug

GASOLINE MODELS

Engine: Industrial Honda OHV or Subaru OHC engine (Electric start optional) · Engine oil drain · Pneumatic idle control to conserve fuel HP/Motor Pump 5.0/230V, 20.0A Electric Cast iron 5.0/230V, 3Ø, 12.2A Electric Cast iron 7.5/230V, 40.0-37.0A Electric Cast iron

Model No. CFM @ 175 PSI Displacement/Engine AM2-SH09-30M 17.2 270cc Honda OHV AM2-SR09-30M 17.2 265cc Subaru OHC AM2-SH13-30M 24.0 389cc Honda OHV

Plug Type Dimensions (LxWxH) NEMA 6-50P 40.5in.x18.5in.x41.5in. NEMA L15-20P 40.5in.x18.5in.x41.5in. NEMA 6-50P 42in.x23.5in.x45in. Pump Cast iron Cast iron Cast iron

Ship Wt. Net Wt. 425 lbs. 332 lbs. 385 lbs. 292 lbs. 512 lbs. 442 lbs.

Dimensions (LxWxH) Ship Wt. Net Wt. 40in.x18.5in.x41.5in. 410 lbs. 317 lbs. 40in.x18.5in.x41.5in. 385 lbs. 292 lbs. 40in.x17.5in.x40.5in. 403 lbs. 310 lbs.

Options (Consult price list or www.mitm.com for more information on option descriptions and qualifying models)

NEMA 6-50P, 50-amp plug

AX-0001 AX-0003 AX-0009 AX-0015, AX-0019, AX-0041

Auto drain metal bowl AX-0016, AX-0017, AX-0042 Manual drain metal bowl AX-0022 Dual control Consult factory Electric start (battery and not included)

www.mitm.com

Electric start (battery and cables included) Wall mount bracket Cable throttle control

800-553-9053

Mi-T-M Corporation

41


80-Gallon

Quality splash lubricated cast iron two stage compressor

A I R

C O M P R E S S O R S

S TAT I O N A R Y - E L E C T R I C - T W O S TA G E

The ultimate in tank capacity! Perfect for shops and service bays where compressed air is considered a fourth utility.

Industrial 1740 RPM UL-listed electric motor with NEMA-4 starter box with magnetic starter

Industrial grade pressure switch and tank gauge

AM2-SE05-80M

1 2 2 YEAR LIMITED

Compressor Pump: Splash lubrication cast iron crankcase · Cast iron head for heat dissipation · Cast iron cylinder · Large canister intake filter · Intercooler · Oil sight glass Frame: Powder coated ASME coded 80-gallon receiver tank · 3⁄16-inch base plate to reduce vibration · 14-gauge powder coated two-piece belt guard Components: Large fly wheel for extra cooling and longer life · Manual tank drain valves and pump oil drain for maintenance · Steel braided supply line hose Model No. CFM @ 175 PSI AM2-SE05-80M 16.9 AM2-S305-80M^ 16.9 AM2-VE75-80M 24.0 ^Three-phase unit.

Horsepower 5.0 HP Electric 5.0 HP Electric 7.5 HP Electric

Pump Cast iron Cast iron Cast iron

Dimensions (LxWxH) 34in.x26in.x72.5in. 34in.x26in.x72.5in. 24in.x35in.x66in.

Ship Wt. 585 lbs. 526 lbs. 610 lbs.

Options (Consult price list or www.mitm.com for more information on option descriptions and qualifying models)

AX-0044 230V, Single-phase, 31.0A, 7.5 HP - Configures unit for 230V single-phase power AX-0045 200V, Three-phase, 23.0A, 7.5 HP - Configures unit for 200V three-phase power AX-0046 230V, Three-phase, 20.0A, 7.5 HP - Configures unit for 230V three-phase power AX-0047 460V, Three-phase, 10.0A, 7.5 HP - Configures unit for 460V three-phase power AX-0058 230V, Single-phase, 23.0A, 5.0 HP - Configures unit for 230V single-phase power AX-0059 200V, Three-phase, 16.1A, 5.0 HP - Configures unit for 200V three-phase power AX-0060 230V, Three-phase, 13.8A, 5.0 HP- Configures unit for 230V three-phase power AX-0061 460V, Three-phase, 6.9A, 5.0 HP - Configures unit for 460V three-phase power *All options add starter to model.

42

Mi-T-M Corporation

800-553-9053

www.mitm.com

YEAR

YEAR LIMITED

PUMP EXCHANGE LIMITED ELECTRIC MOTOR PROGRAM WARRANTY WARRANTY

CSA Certified: AM2-SE05-80M AM2-S305-80M

Best Pump Warranty in the Industry See p. 44 for details Net Wt. 466 lbs. 407 lbs. 491 lbs.


C O M P R E S S O R S

Quality splash lubricated cast iron two stage compressor

Industrial 1740 RPM UL-listed electric motor with NEMA-4 starter box with magnetic starter

Tabbed design offers flexible installation, smooth operation and reduced vibration stress on tank

AM2-HE10-120M

1 22 YEAR LIMITED

A I R

S TAT I O N A R Y - E L E C T R I C - T W O S TA G E

120-Gallon

The Mi-T-M 120 gallon air compressor is designed for the most demanding applications where dependable air supply is essential. This high-capacity air compressor offers maximum air delivery day-in and day-out.

YEAR

LIMITED ELECTRIC MOTOR WARRANTY WARRANTY

YEAR LIMITED

PUMP WARRANTY

Compressor Pump: Splash lubrication cast iron crankcase · Cast iron head for heat dissipation · Cast iron cylinder · Large canister intake filter · Intercooler · Oil sight glass Frame: Powder coated ASME coded 120-gallon receiver tank · 3⁄16-inch base plate to reduce vibration · 14-gauge one-piece belt guard for improved cooling Components: Industrial grade pressure switch · Large fly wheel for extra cooling and longer life · Manual tank drain valves and pump oil drain for maintenance

Model No. CFM @ 175 PSI Horsepower Pump Dimensions (LxWxH) AM2-HE10-120M 30.5 10.0 HP Electric Cast iron 74in.x28in.x50in. AM2-HE15-120M 43.8 15.0 HP Electric Cast iron 74in.x28in.x55in.

Ship Wt. Net Wt. 904 lbs. 785 lbs. 995 lbs. 876 lbs.

Options

AX-0048 230V, Single-phase, 39.0A, 10.0 HP - Configures unit for 230V single-phase power AX-0049 200V, Three-phase, 30.8A, 10.0 HP - Configures unit for 200V three-phase power AX-0050 230V, Three-phase, 26.8A, 10.0 HP - Configures unit for 230V three-phase power AX-0051 460V, Three-phase, 13.4A, 10.0 HP - Configures unit for 460V three-phase power AX-0052 200V, Three-phase, 44.0A, 15.0 HP - Configures unit for 200V three-phase power AX-0053 230V, Three-phase, 38.0A, 15.0 HP - Configures unit for 230V three-phase power AX-0054 460V, Three-phase, 19.0A, 15.0 HP - Configures unit for 460V three-phase power *All options add starter to model.

www.mitm.com

800-553-9053

Mi-T-M Corporation

43


Air Compressor Pumps

C O M P R E S S O R S A I R

44

T H E M i - T- M D I F F E R E N C E Best Pump Warranty in the Industry. The Mi-T-M Pump Exchange Program provides pump replacement for the Mi-T-M customer for the warranty period of two years from the date of purchase. If the air compressor pump fails due to a manufacturing defect during the two year warranty period, Mi-T-M will replace the pump at no charge. The air compressor should be returned to the Mi-T-M authorized dealer where it was purchased. The dealer will remove the pump and replace it with another single or two stage Mi-T-M pump at no charge. The Pump Exchange Program is not transferable and covers all pump problems with the exception of abuse or lack of basic general maintenance as stated in the owners manual and warranty statement.

No more pump-related maintenance costs!

Single Stage Cast Iron Compressor - The sturdy cast iron crankcase is bi-supported for smooth running, longer bearing life and less maintenance. - An oversized cast iron crankcase creates a large oil reservoir for reliable lubrication. - Oversized ball-bearing style shaft bearings for smooth operation and longer life. - Crankcase is vented to atmosphere through an exclusive labyrinth system, avoiding Cast iron construction (excluding the presence of oil into the streamline. manifold) with all components - High profile fin design on cylinders optimizes heat dissipation. precision CNC machined. - Reversible cylinder head allows discharge to right or left I side of pump. - Large stainless-steel valves offer less restriction to flow, giving greater volumetric efficiency, cooler running temperatures and longer valve life. - Aluminum head to dissipate heat. H - Industrial duty inlet filter/silencer for remarkably low sound levels.

Low operating speed reduces wear and extends the life of all components.

Two Stage Cast Iron Compressor 1. The sturdy iron crankshaft is bi-supported for smooth running, longer bearing life and less maintenance. 2. An oversized cast iron crankcase creates a large oil reservoir for reliable lubrication. 3. Crankcase is vented to atmosphere. 4. Oversized ball-bearing style shaft bearings for smooth operation and longer life. 5. Venting system for reduced crankcase temperature B and pressure. 6. High profile fin design on cylinders optimizes heat dissipation. E 7. Large stainless-steel valves offer less restriction to flow, giving greater volumetric efficiency, cooler running temperatures and longer valve life. 8. Aluminum head to dissipate heat. - Oil sight glass for easy monitoring of the correct Rugged pump design assures reliability and long maintenance oil level. intervals. - Finned copper intercooler for heat dissipation.

Mi-T-M Corporation

800-553-9053

www.mitm.com

G

F

D

C


Steel Hex Nipples

For when you have a female NPT thread and need a male NPT thread. Corrosion-resistant steel construction. 24-0010 (3⁄8-inch x 3⁄8-inch) 24-0024 (1⁄2-inch x 3⁄8-inch) 24-0031 (1⁄2-inch x 1⁄2-inch) 24-0145 (1⁄4-inch x 1⁄4-inch) 24-0146 (3⁄8-inch x 1⁄4-inch) 24-0265 (1⁄2-inch x 1⁄4-inch)

Coupler Test Bar

Coupler test bar includes four 1⁄4-inch plugs: Tru-flate Automotive Style, Industrial Interchange Style, ARO Style and Lincoln Style. 17-4952

Gauges

Use our gauges to monitor tank and outlet pressures. 22-0257 (200-PSI maximum rating) 22-0271 (300-PSI maximum rating) - 1⁄8-inch MPT

Air Chucks

Our air chucks help maintain proper tire pressure. AT-3001 (Dual foot - 1⁄4-inch FPT) AT-3001 AT-3002 (Ball foot - 1⁄4-inch FPT) AT-3003 (Deluxe air inflator with 12-inch hose; 12 to 120-PSI)

AT-3003

C O M P R E S S O R S

Barbed Hose Fittings Threaded end connects tools, fittings, couplers or plugs. Barbed hose fittings repair or assemble damaged or bulk hose. Corrosion-resistant brass construction. 23-0050 (3⁄8-male x 1⁄2-hose) 23-0051 (1⁄4-male x 1⁄4-hose) 23-0052 (3⁄8-male x 1⁄4-hose) 23-0069 (1⁄4-male x 3⁄8-hose) 23-0073 (3⁄8-male x 3⁄8-hose) Brass Couplings Use to combine two short hoses into one long hose. Corrosion-resistant brass construction. 23-0002 (1⁄4-inch FPT x 1⁄4-inch FPT) 23-0103 (1⁄4-inch MPT x 1⁄4-inch MPT) Barbed Hose Splicers Repair damaged hoses by combining hose sections together with our barbed hose splicers. Corrosion-resistant brass construction. 23-0415 - Fits 1⁄4-inch I.D. hose 23-0416 - Fits 3⁄8-inch I.D. hose

A I R

Brass Fittings

MISCELLANEOUS ACCESSORIES

Accessories

From fittings to drains, pumps to punctureproof tires and everything in between. Mi-T-M is a one-stop shop for all your air compressor accessory needs.

AT-3002

Engine Oil Drain Kits

The engine oil drain kits move the engine drain plug away from the frame so oil can be drained into a container. 70-0357 (196cc Honda engines) 70-0358 (270cc & 389cc Honda engines) 70-0380 (126cc, 211cc, 265cc & 404cc Subaru engines)

Electric Compressor Drain

Automatically drains filters, compressor tanks, drip legs, aftercoolers and receivers. AT-4012 - 1⁄4-inch NPT connector

Air/Water Adapter Kit

For filling tires with liquids. Connects a standard tractor valve to 3⁄4-inch garden hose bibb. Push-button bleeder valve releases trapped air. Two extra bushings included to fit standard air/water valves, new style fast flow valves, large bore valves and extensions, or standard valve stems. 23-0414

Air Hoses/Leader Hose

Air Hoses Ideal for most compressor lines and pneumatic tools. Non-conductive oil and abrasion resistant outer cover. 15-0230 (50-foot x 3⁄8-inch PVC) 15-0231 (25-foot x 3⁄8-inch PVC) - 1⁄4-inch NPT fittings 15-0232 (50-foot x 3⁄8-inch Rubber) 15-0233 (25-foot x 3⁄8-inch Rubber) - 1⁄4-inch NPT fittings - Bend restrictors Leader Hose Our leader hose attaches between the air hose and your tool, allowing for more flexibility and safety. 15-0229 (24-inch leader hose with swivel) - Flexible hose - 360° swivel fitting

Blow Guns

Our blow guns provide a leak-proof seal for blowing dirt and debris from lines with high pressure air. AT-3004 (Blow gun, standard rubber tip) AT-3005 (Blow gun, safety tip) AT-3007 (AT-3005 with 1-foot extension) AT-3008 (AT-3005 with 2-foot extension) AT-3009 (AT-3005 with 4-foot extension)

AT-3004

AT-3009

AT-3005 www.mitm.com

800-553-9053

Mi-T-M Corporation

45


Accessories

C O M P R E S S O R S A I R

MISCELLANEOUS ACCESSORIES

Plugs

Add the ability to easily connect and disconnect your air tools and air hoses. 17-0049 (1⁄4-inch MPT-1⁄4 Industrial Interchange Style) 17-0050 (1⁄4-inch MPT-1⁄4 Automotive Style) 17-0051 (1⁄4-inch MPT-1⁄4 Lincoln Style) 17-0052 (1⁄4-inch MPT-1⁄4 ARO Style) 17-0053 (1⁄4-inch FPT-1⁄4 Industrial Interchange Style) 17-0054 (1⁄4-inch FPT-1⁄4 Automotive Style) 17-0055 (1⁄4-inch FPT-1⁄4 Lincoln Style) 17-0056 (1⁄4-inch FPT-1⁄4 ARO Style) 17-0061 (3⁄8-inch MPT-3⁄8 Industrial Interchange Style) 17-0062 (3⁄8-inch FPT-3⁄8 Industrial Interchange Style) 23-0017 (3⁄8-inch to 1⁄4-inch reducer)

Couplers

Add the ability to easily connect and disconnect your air tools and air hoses. 17-0043 (1⁄4-inch MPT-1⁄4 Industrial Interchange Style) 17-0044 (1⁄4-inch MPT-1⁄4 Automotive Style) 17-0045 (1⁄4-inch FPT-1⁄4 Industrial Interchange Style) 17-0046 (1⁄4-inch FPT-1⁄4 aAutomotive Style) 17-0047 (1⁄4-inch FPT-1⁄4 Lincoln Style) 17-0048 (1⁄4-inch FPT-1⁄4 ARO Style) 17-0059 (3⁄8-inch MPT-3⁄8 Industrial Interchange Style) 17-0060 (3⁄8-inch FPT-3⁄8 Industrial Interchange Style) 17-0067 (3⁄8-inch FPT-1⁄4 Industrial Interchange Style) 17-0068 (3⁄8-inch MPT-1⁄4 Industrial Interchange Style)

Couplers/Plug Sets

Add the ability to easily connect and disconnect your air tools and air hoses. 17-0045K (1⁄4-inch FPT-1⁄4 Industrial Interchange Style; 1 ⁄4-inch MPT-1⁄4 Industrial Interchange Style; ) 17-0046K (1⁄4-inch FPT-1⁄4 Automotive Style; 1⁄4-inch MPT-1⁄4 Automotive Style)

Replacement Pumps

Single stage replacement pump, cast iron with aluminum head. 3-0315 (Cast iron pump with aluminum head) - Fits units up to 2.0-HP electric 3-0303 (Cast iron pump with aluminum head) - Fits units up to 3.0-HP electric or 210cc gasoline Two stage replacement pump, cast iron with cast iron or aluminum head. 3-0233 (Cast iron pump with aluminum head) 3-0298 (Cast iron pump with cast iron head) - Fits units up to 5.0-HP electric or 270cc gasoline 3-0304 (Cast iron pump with cast iron head) - Fits units up to 389cc gasoline 3-0312 (Cast iron pump with cast iron head) - Fits units up to 7.5-HP electric 3-0313 (Cast iron pump with cast iron head) - Fits units up to 10.0-HP electric 3-0314 (Cast iron pump with cast iron head) - Fits units up to 15.0-HP electric

46

Mi-T-M Corporation

800-553-9053

www.mitm.com

Filters

Our air compressor filters remove dirt, debris and water in air line. AT-4004-M (1⁄4-inch poly bowl) - Includes bowl guard and manual drain - 150-psig maximum supply pressure AT-4005-M (1⁄2-inch metal bowl) - Main line filter - Includes sight glass and manual drain - 250-psig maximum supply pressure AT-4006-M (3⁄8-inch poly bowl) - General purpose filter - Includes bowl guard and manual drain - 150-psig maximum supply pressure AT-4007-M (Disposable in-line filter) - 1⁄4-inch MPT x 1⁄4-inch FPT - Desiccant, disposable filter and regulator in one compact unit AT-4008-M (Air tool filter) - 1⁄4-inch MPT x 1⁄4-inch FPT

Regulators

Regulators reduce and maintain pressure levels to safely operate air tools. 22-0326 - 1⁄4-inch inlet/outlet - 1⁄8-inch gauge port - 250-psig max. inlet/125-psig max. outlet 22-0231 - 3⁄8-inch inlet/outlet - 1⁄8-inch gauge port - 300-psig max. inlet/150-psig max. outlet 22-0358 - 1⁄2-inch inlet/outlet - 1⁄4-inch gauge port - 300-psig max. inlet/250-psig max. outlet

Filter/Regulator

Our combination air compressor filter/regulator removes dirt, debris and water in air line while reducing and maintaining pressure levels to safely operate air tools. AT-4011-M (3⁄8-inch filter/regulator) - Poly bowl with manual drain - 150-psig maximum supply pressure

In-Line Lubricators

Ideal for air tool lubrication. AT-4009-M (1⁄4-inch poly bowl with bowl guard) AT-4010-M (3⁄8-inch poly bowl with bowl guard) - 150-psig maximum supply pressure


Air Filter Elements

Paper air filter replacement elements. The paper passes air through the filter with low restriction, but any dust or dirt in the air is deposited on the pleated outer surface of the element. 19-0218 (21⁄2-inch diameter x 3⁄8-inch M) - Replacement filter for 19-0217 19-0082 (31⁄4-inch diameter x 1⁄2-inch M) - Replacement filter for 19-0083 19-0220 (41⁄8-inch diameter x 1-inch M) - Replacement filter for 19-0219, 19-0240 19-0226 (6-inch diameter x 3⁄4-inch M) - Replacement filter for 19-0225

Air Filter Canisters

Houses air filter elements. 19-0215 (21⁄2-inch diameter x 3⁄8-inch M) - Plastic filter canister 19-0217 (21⁄2-inch diameter x 3⁄8-inch M) - Metal filter canister 19-0083 (31⁄4-inch diameter x 1⁄2-inch M) - Metal filter canister 19-0219 (41⁄8-inch diameter x 1-inch M) - Metal filter canister 19-0225 (6-inch diameter x 3⁄4-inch M) - Metal filter canister 19-0240 (41⁄8-inch diameter x 1⁄2-inch M) - Metal filter canister

Building an Efficient Air System

Compressed-air-powered equipment and machinery are critical elements in the productivity, efficiency and economy of today's industry. Quality air is the essential element for effective operation of this equipment. Water and dirt can cause major problems in compressed air lines. The use of filters that remove moisture and impurities from the air help high-speed pneumatic production lines operate more efficiently. Regulators and lubricators may also be added to control and lubricate downstream equipment. A quality air system can save time, money and keep equipment operating at maximum efficiency.

C O M P R E S S O R S

These tires are flat-free and maintenance-free. 10-inch Tires TX-1001-W (One tires) TX-1002-W (Two tires) - 10-inch tire - White hub - Consult factory before ordering 13-inch Tires TX-1302-W (Two tires) TX-1304-W (Four tires) - 13-inch tire - White hub - Consult factory before ordering

A I R

Puncture-Proof Tires

Accessories

MISCELLANEOUS ACCESSORIES

Air Compressor Hot air leaves compressor, water vapor cools and liquefies as it goes downstream.

AT-4012-M - 1⁄4-inch NPT Electric compressor drain automatically drains liquid from tank

AT-4005-M - 1⁄2-inch NPT Main line filter with manual drain and metal bowl removes water and debris

AT-4006-M - 3⁄8-inch NPT General purpose filter with polycarbonate bowl and manual drain, removes water and debris

AT-4008-M Air tool filter removes dirt and debris

Paint Spraying Air Operated Tools

AT-4010-M - ⁄8-inch NPT Lubricator with polycarbonate bowl injects a fine stream of oil to lubricate air tools 3

22-0231 Regulator reduces pressure to safe operating level for air tools

AT-4007-M In-line desiccant, disposable filter and regulator in one compact unit

AT-4011-M - 3⁄8-inch NPT Filter/regulator with polycarbonate bowl and manual drain combines filter and regulator into one compact unit

www.mitm.com

800-553-9053

Mi-T-M Corporation

47


Accessories

C O M P R E S S O R S A I R

48

A I R S Y S T E M S E T U P - A I R E Q U I P M E N T E S T I M AT I N G G U I D E

Important Steps to an Air System Setup

Use galvanized pipe

1. Main-line filter and regulator should be installed at least 20-feet from Drop a 6-inch pipe to drip leg the compressor. The air will cool down, allowing much of the water vapor to condense naturally for removal by filtration.

Goose neck all workstations

2. All line drops (workstations) should be taken from the top of the main line. This prevents water from flowing into branch lines. 3. Galvanized pipe is recommended when building an air system. Follow illustration to the right when building a workstation drop.

Air Equipment Estimating Guide

Always use free air (CFM) and pressure (PSI) specifications from the nameplate on the device or from the manufacturer. Free air figures (in the table below) are averages and may differ by specific brand. INDUSTRIAL EQUIPMENT CFM REQUIREMENTS BASED ON NORMAL USAGE

Miscellaneous Portable Tools at 70 to 90 PSI Tools Drill, 1⁄6" to 3⁄8" Drill, 3⁄8" to 5⁄16" Screwdriver, #2 to #6 Screw Screwdriver, #6 to 5⁄16" Screw Tapper, to 3⁄8" Nutsetters, to 3⁄8" Nutsetters, to 3⁄4" Impact Wrench, 1⁄4" Impact Wrench, 3⁄8" Impact Wrench, 1⁄2" Impact Wrench, 3⁄4" Impact Wrench, 11⁄4" Die Grinder, Small Die Grinder, Medium Horizontal Grinder, 2" Horizontal Grinder, 4" Horizontal Grinder, 6" Horizontal Grinder, 8" Vertical Grinders and Sanders, 5" Pad Vertical Grinders and Sanders, 7" Pad Vertical Grinders and Sanders, 9" Pad Burring Tool, Small Burring Tool, Large Rammers, Small Rammers, Medium Rammers, Large Backfill Tamper Compression Riveter Nailers and Staplers Riveter Paint Spray Gun Scaling Hammer Chipping Hammer Riveting Hammer Circular Saw, 8" Circular Saw, 12" Lightweight Chain Saw Heavy-Duty Chain Saw

Mi-T-M Corporation

800-553-9053

www.mitm.com

CFM 6.3 8.8 3.0 6.0 5.0 6.0 7.5 3.8 5.0 7.5 8.8 13.8 3.8 6.0 5.0 15.0 15.0 20.0 8.8 15.0 17.5 3.8 6.0 3.3 8.5 10.0 6.3 0.2 cu. ft. per cycle 5.0 to 8.0 6.0 5.0 3.0 7.5 7.5 11.3 16.3 7.0 21.8

AUTOMOTIVE EQUIPMENT CFM REQUIREMENTS BASED ON TOOLS BEING USED 25% OF THE TIME Portable Tools Air Filter Cleaner Body Polisher Body Sander, Orbital Brake Tester Carbon Remover Dusting Blow Gun Drill, 1⁄16" to 3⁄8" Impact Wrench, 3⁄8" Square Drive Impact Wrench, 1⁄2" Square Drive Impact Wrench, 3⁄4" Square Drive Impact Wrench, 1" Square Drive Die Grinder Vertical Disc Sanders Filing/Sawing Machine, Small Filing/Sawing Machine, Large Burring Tool Tire Rim Stripper Tire Changer Tire Inflation Line Tire Spreader Air Hammer Tire Hammer Bead Breaker Spring Oiler Spray Gun Engine Cleaner Production Paint Spray Gun Touch-Up Paint Spray Gun Undercoat Paint Spray Gun Grease Gun Hydraulic Lift Hydraulic Floor Jack Pneumatic Garage Door Radiator Tester Transmission/Differential Flusher Fender Hammer Medium-Duty Sander

Equipment PSI Range CFM 70 to 100 3.0 70 to 100 2.0 70 to 100 5.0 70 to 100 3.5 70 to 100 3.0 90 to 100 2.5 70 to 90 4.0 70 to 90 2.0 70 to 90 3.5 70 to 90 7.5 70 to 90 10.0 70 to 90 5.0 90 to 100 10.0 90 to 100 3.0 90 to 100 5.0 90 to 100 5.0 125 to 150 6.0 125 to 150 5.5 125 to 150 1.5 125 to 150 1.0 90 to 100 4.0 90 to 100 12.0 125 to 150 12.0 90 to 100 4.0 90 to 100 5.0 90 to 100 8.5 90 to 100 3.5 90 to 100 19.0 120 to 150 3.0 145 to 175 6.0 125 to 150 6.0 120 to 150 3.0 90 to 100 1.0 70 to 100 3.0 70 to 100 9.0 70 to 100 40.0


S I N G L E

A N D

T W O

S TA G E

Air Compressor/Generators

8 OR 30-GALLON GASOLINE P O R TA B L E - S TAT I O N A R Y www.mitm.com

800-553-9053

Mi-T-M Corporation

49


8-Gallon

C O M P R E S S O R / G E N E R AT O R S

P O R TA B L E / S TAT I O N A R Y - G A S O L I N E S I N G L E / T W O S TA G E

Increase productivity by combining two vital pieces of equipment into one versatile must-have machine! Ideal for every industrial application that requires both electrical power and air.

Quality cast iron single or two stage compressor

Industrial Honda OHV or Subaru OHV engine

A I R

AG1-PH65-08M1

Industrial 1800 or 3500-watt generator with two NEMA 5-15R receptacles

Compressor Pump: Cast iron crankcase · Splash lubrication to extend the hours of performance · Cast iron head for heat dissipation (Aluminum head on single stage models) · Large canister intake filter · Durable stainless-steel braided discharge hose for longer life Generator: Brushless 120V alternator Frame: Powder coated 8-gallon twin tank receivers · 7-gauge base plate to reduce vibration · Convenient lifting handles (Portable models only) · Pneumatic tires with tubes and steel hubs (Portable models only) · 14-gauge powder coated two-piece belt guard with 1⁄4-turn release for quick access to belts Components: Belt tightening system pulls engine straight to ensure constant belt alignment · Regulator and two gauges for tank and outlet pressure · 16.5-inch fly wheel for extra cooling and longer life (12-inch on single stage models) · Manual drain valves for proper maintenance · Quality pilot valve unloader Alternator Wattage Cont. with Cont. with CFM @ CFM @ Max. Compressor Compressor Model No. 100 PSI 125 PSI Output On Load Off Load Receptacle AG1-PH65-08M1 11.6 10.9 1800 watts 600 watts 1600 watts NEMA 5-15R AG1-PR07-08M1 11.6 10.9 1800 watts 600 watts 1600 watts NEMA 5-15R Alternator Wattage Cont. with Cont. with CFM @ CFM @ Max. Compressor Compressor Model No. 100 PSI 175 PSI Output On Load Off Load Receptacle AG2-PH13-08M1 16.3 15.7 3500 watts 2300 watts 3300 watts NEMA 5-15R AG2-PR14-08M 16.3 15.7 3500 watts 2300 watts 3300 watts NEMA 5-15R AG2-SH13-08M1^ 16.3 15.7 3500 watts 2300 watts 3300 watts NEMA 5-15R AG2-SR14-08M1^ 16.3 15.7 3500 watts 2300 watts 3300 watts NEMA 5-15R ^Stationary model.

2 2 3 3 YEAR

YEAR LIMITED

LIMITED PUMP EXCHANGE WARRANTY PROGRAM

HONDA ENGINE WARRANTY

50

Mi-T-M Corporation

Displacement/ Engine Pump Dimensions (LxWxH) Ship Wt. Net Wt. 196cc Honda OHV Cast iron 44.5in.x26in.x27.5in. 257 lbs. 207 lbs. 211cc Subaru OHC Cast iron 44.5in.x26in.x27.5in. 257 lbs. 207 lbs.

Displacement/ Engine 389cc Honda OHV 404cc Subaru OHV 389cc Honda OHV 404cc Subaru OHV

Pump Dimensions (LxWxH) Ship Wt. Cast iron 52in.x30in.x36in. 425 lbs. Cast iron 52in.x30in.x36in. 425 lbs. Cast iron 45in.x22in.x36in. 425 lbs. Cast iron 45in.x22in.x36in. 425 lbs.

Engine oil drain Service truck mount kit (recommended for units that are mounted in service truck applications) Electric start (battery not included) Lifting hook Puncture-proof tires

800-553-9053

www.mitm.com

SUBARU ENGINE WARRANTY

Best Pump Warranty in the Industry See p. 44 for details

Options (Consult price list or www.mitm.com for more information on option descriptions and qualifying models) 70-0357, 70-0358, 70-0380 854-0093 AX-0019 AX-0028 TX-1002-W, TX-1302-W

YEAR LIMITED

YEAR LIMITED

NEMA 5-15R

Net Wt. 360 lbs. 360 lbs. 360 lbs. 360 lbs.


C O M P R E S S O R / G E N E R AT O R S

NEW N 30-GALLO MODELS

A I R

S TAT I O N A R Y - G A S O L I N E - T W O S TA G E

30-Gallon

Professional remodelers, contractors and DIYers will appreciate the convenience of an air compressor with a built-in generator system.

Quality cast iron two stage compressor

Industrial Honda OHV or Subaru OHV engine

Industrial 3500 or 4000-watt generator with four NEMA 5-15R receptacles AG2-SR14-30M

2 2 3 3 YEAR

YEAR LIMITED

YEAR LIMITED

L IMITED PUMP EXCHANGE WA RRANTY PROGRAM

HONDA ENGINE WARRANTY

YEAR LIMITED

SUBARU ENGINE WARRANTY

Best Pump Warranty in the Industry See p. 44 for details

Compressor Pump: Cast iron crankcase · Splash lubrication to extend the hours of performance · Cast iron head for heat dissipation · Large canister intake filter · Durable stainless-steel braided discharge hose for longer life Generator: Brushless 120V alternator Frame: Powder coated ASME coded 30-gallon receiver tank · 7-gauge base plate to reduce vibration · 14-gauge powder coated two-piece belt guard with 1⁄4-turn release for quick access to belts Components: Belt tightening system pulls engine straight to ensure constant belt alignment · Regulator and two gauges for tank and outlet pressure · 16.5-inch fly wheel for extra cooling and longer life · Manual drain valves for proper maintenance · Quality pilot valve unloader

Alternator Wattage Cont. with Cont. with CFM @ CFM @ Max. Compressor Compressor Model No. 100 PSI 175 PSI Output On Load Off Load Receptacle AG2-SH13-30M 16.3 15.7 3500 watts 2300 watts 3300 watts NEMA 5-15R AG2-SR14-30M 16.3 15.7 4000 watts 3000 watts 3500 watts NEMA 5-15R Options

70-0358, 70-0380 854-0093 AX-0019, AX-0062 AX-0063 AX-0064, AX-0065

Displacement/ Engine Pump Dimensions (LxWxH) Ship Wt. Net Wt. 389cc Honda OHV Cast iron 40in.x24.5in.x45in. 500 lbs. 435 lbs. 404cc Subaru OHC Cast iron 40in.x24.5in.x45in. 500 lbs. 435 lbs.

Engine oil drain - Moves engine drain plug away from frame so oil can be drained into a container Service truck mount kit (recommended for units that are mounted in service truck applications) Electric start (Battery, battery box, tray and cables not included) - For easy starting Lifting hook - For easier portability Electric start (Battery box, tray and cables included, battery not included) - For easy starting

NEMA 5-15R

www.mitm.com

800-553-9053

Mi-T-M Corporation

51


8-Gallon

C O M P R E S S O R / G E N E R AT O R S A I R

B E N E F I T S O F C O M P R E S S O R / G E N E R AT O R S

The benefits of a combination air compressor/generator: - Compressor/generators offer you double the convenience - you can operate air tools and at the same time power the lights in your work area. - Save money by purchasing one combination unit instead of an air compressor and generator separately. - Offers a relatively small footprint compared to owning two pieces of equipment. - Only one unit to maintain, therefore saving time and money on troubleshooting and parts. - Handy for remote locations where air and power are both required but not available. - Travels well. The stationary unit can be mounted on the back of a service truck or work trailer, utilizing a minimum amount of space. - The 20-amp outlets on the large (AG2) units can run a small wire-feed welder. This is especially useful for farmers. - Particularly useful in the following industries/applications: - Agricultural - Construction - Auto service industry/Road-side assistance - Virtually any service truck that repairs equipment in the field, on the farm or construction site. - Uses for a combination air compressor/generator: Air Compressor - Impact wrenches, grinders, drills and nailers - Shops - Air - Tires - Air - Sand blasters - Paint sprayers - Air/hydraulic pumps - Electric/hydraulic pumps - Air jacks - Grease pumps - Air tools

AG2-SR14-08M1

52

Mi-T-M Corporation

800-553-9053

www.mitm.com

Generator - Jobsites - Plants - Offices - Farms - Home - Mobile lights - Battery chargers - Fans - Electric/hydraulic pumps - Power tools - Saws, drills and grinders


P O R TA B L E

Generators

I N V E R T E R S - G E N E R AT O R S 1 7 0 0 T O 1 3 , 0 0 0 - W AT T S GASOLINE - DIESEL H A N D C A R R Y - P O R TA B L E www.mitm.com

800-553-9053

Mi-T-M Corporation

53


Inverters

G E N E R AT O R S

H A N D C A R R Y / P O R TA B L E 1 7 0 0 , 3 2 0 0 & 4 3 0 0 - M A X I M U M W AT TA G E

Get clean, quiet, high-power output with a Mi-T-M inverter! A perfect fit for the recreational vehicle industry.

Unique soundproof panels reduce noise (1700-watt model)

GEN-1700-iMS0

FEATURED ON ALL MODELS

Easy grip frame design maximizes ease of handling (1700-watt model)

GEN-4300-iMS0

Inverter Technology: Reduces size, weight, noise and fuel consumption · Produces commercial quality AC power for sensitive electronic equipment Engine: Low oil shutdown engine · Idle control Alternator: Brushless 120V alternator · Total harmonic distortion (THD) less than 3%

Double-wall acoustical housing dampening panel and resin panel reduces both high and low frequency noise (3200 & 4300watt models)

Components: Special vibration control and low-tone mufflers further reduce noise · Battery charging · Fuel shutoff valve Miscellaneous: USDA/USFS-approved spark arrestors · Circuit breaker protected

GEN-3200-iMS0 & GEN-4300-iMS0 Engine: Electric start (battery not included)

Components: Sound reducing materials are highly fire-resistant · Voltmeter/hour meter RV Application Advantage: Will run an air conditioner unit (15,000-BTU), refrigerator and microwave (3200-watt model)* · Will run an air conditioner unit (15,000-BTU), refrigerator and microwave plus interior lights (4300-watt model)* *Based on tests conducted on a 2005 5th-wheel camper. Test results are available. Individual test results could vary depending on condition and efficiency of appliance.

Model No. GEN-1700-iMS0* GEN-3200-iMS0* GEN-4300-iMS0* Max. AC Output 1,650 watts 3,200 watts 4,300 watts Rated AC Output 1,350 watts 2,800 watts 3,800 watts Displacement/Engine 86cc Subaru OHV 211cc Subaru OHC 265cc Subaru OHC Frequency/Voltage 60Hz/120V 60Hz/120V 60Hz/120V Max. Amps (120V) 13.8 26.7 35.8 Cont. Amps (120V) 11.2 23.3 31.7 Receptacles 120V, 20A GFCI duplex 120V, 20A GFCI duplex 120V, 20A GFCI duplex 120V, 30A twist lock 120V, 30A twist lock Main Circuit Breaker Electronic circuit protection Electronic circuit protection Electronic circuit protection Rated Speed 4,200 RPM 3,600 RPM 3,600 RPM Decibel Rating 59.0 58.0 62.0 Fuel Capacity 1.1 gallon 3.7 gallon 4.2 gallon Run Time (at full load) 3.5 hours 5.5 hours 5.6 hours Dimensions (LxWxH) 19.3in.x11.6in.x17.5in. 21in.x18.9in.x22.9in. 21in.x18.9in.x22.9in. Ship Wt. 55 lbs. 143 lbs. 174 lbs. Net Wt. 45 lbs. 131 lbs. 162 lbs.

2 3 YEAR

YEAR LIMITED

LIMITED WARRANTY

SUBARU ENGINE WARRANTY

*Consult factory for models that comply to California regulations.

GFCI 5-20R

Inverter generator ratings represent no-load sound levels. Noise level tested at seven meters (75% load). Rating represents minimum noise level rating.

Options (Consult price list or www.mitm.com for more information on option descriptions and qualifying models) 32-0915

54

RV generator adapter

Mi-T-M Corporation

800-553-9053

www.mitm.com

L5-30R 125 VAC


Large low-tone muffler to reduce noise to lowest level possible

Easy-access and protected control panel with magnetic circuit breaker and GFCIprotected receptacle

Heavy-duty wraparound frame with 1-inch powder coated steel tubing

G E N E R AT O R S

P O R TA B L E - G A S O L I N E 3 0 0 0 - M A X I M U M W AT TA G E

Portable

These compact generators pack a lot of power! The larger fuel tank model allows for extended run-times optimizing operational efficiency.

GEN-3000-1MH0

Engine: Low oil shutdown engine Alternator: Brushless 120V alternator · Total harmonic distortion (THD) less than 5% · 100% copper windings

2 3

YEAR LIMITED

YEAR

LIMITED WARRANTY

Frame: Low profile, compact design · Angled isolator design features four neoprene isolators

HONDA ENGINE WARRANTY

*Consult factory for models that comply to California regulations.

GFCI 5-20R

Components: Fuel shutoff valve · Large fuel tank capacity for extended run time (GEN-3000-1MH0) · Heavy-duty industrial air cleaners hold up under extreme conditions Miscellaneous: USDA/USFS-approved spark arrestors · Circuit breaker protected

Model No. GEN-3000-0MH0* Max. AC Output 3,000 watts Rated AC Output 2,450 watts Displacement/Engine 163cc Honda OHV Frequency/Voltage 60Hz/120V Max. Amps (120V) 25.0 Cont. Amps (120V) 20.4 Receptacle 120V, 20A GFCI duplex Main Circuit Breaker 20A push-button Rated Speed 3,600 RPM Decibel Rating 74.8 Fuel Capacity 1.0 gallon Run Time (at full load) 2.7 hours Dimensions (LxWxH) 25.7in.x17in.x16in. Ship Wt. 125 lbs. Net Wt. 111 lbs.

GEN-3000-1MHO* 3,000 watts 2,450 watts 163cc Honda OHV 60Hz/120V 25.0 20.4 120V, 20A GFCI duplex 20A push-button 3,600 RPM 74.8 2.6 gallon 7.4 hours 25in.x18in.x18in. 146 lbs. 130 lbs.

Noise level tested at seven meters (75% load). Rating represents minimum noise level rating.

www.mitm.com

800-553-9053

Mi-T-M Corporation

55


Portable

G E N E R AT O R S

P O R TA B L E - G A S O L I N E 4 0 0 0 & 5 0 0 0 - M A X I M U M W AT TA G E

The low profile, compact design is an excellent choice for any industrial application.

Large low-tone muffler to reduce noise to lowest level possible

Easy-access and protected control panel with magnetic circuit breakers and GFCI-protected receptacles

GEN-5000-0MS0

Engine: Low oil shutdown engine Alternator: Brushless 120V/240V alternator · Total harmonic distortion (THD) less than 5% · 100% copper windings Frame: Low profile, compact design · Angled isolator design features four neoprene isolators Components: Fuel shutoff valve · Easy-to-read fuel gauge · Full power switch · Fuel tanks are powder coated outside, zinc-plated inside to prevent rusting · Heavy-duty industrial air cleaners hold up under extreme conditions Miscellaneous: USDA/USFS-approved spark arrestors · Circuit breaker protected

23 3 YEAR

YEAR LIMITED

YEAR L IMITED

LIMITED HONDA ENGINE SUBARU ENGINE WARRANTY WARRANTY WARRANTY

*Consult factory for models that comply to California regulations.

Model No. GEN-4000-0MH0* GEN-4000-0MS0* GEN-5000-0MS0 * Max. AC Output 4,000 watts 4,000 watts 5,000 watts Rated AC Output 3,500 watts 3,500 watts 4,400 watts Displacement/Engine 242cc Honda OHV 211cc Subaru OHC 265cc Subaru OHC Frequency/Voltage 60Hz/120V/240V 60Hz/120V/240V 60Hz/120V/240V Max. Amps (120V/240V) 33.3/16.7 33.3/16.7 41.7/20.8 Cont. Amps (120V/240V) 29.2/14.6 29.2/14.6 36.7/18.3 Receptacles (2) 120V, 20A GFCI duplex (2) 120V, 20A GFCI duplex (2) 120V, 20A GFCI duplex 120V/240V, 20A twist lock 120V/240V, 20A twist lock 120V/240V, 20A twist lock 120V, 30A twist lock 120V, 30A twist lock 120V, 30A twist lock Main Circuit Breakers (2) 20A toggle circuit breaker, single pole (2) 20A toggle circuit breaker, single pole (2) 20A toggle circuit breaker, single pole 20A toggle circuit breaker, double pole 20A toggle circuit breaker, double pole 20A toggle circuit breaker, double pole 30A toggle circuit breaker, single pole 30A toggle circuit breaker, single pole 30A toggle circuit breaker, single pole Rated Speed 3,600 RPM 3,600 RPM 3,600 RPM Decibel Rating 75.7 74.0 73.8 Fuel Capacity 5.7 gallon 5.7 gallon 5.7 gallon Run Time (at full load) 9.3 hours 9.3 hours 6.8 hours Dimensions (LxWxH) 29in.x19.75in.x22.5in. 29in.x19.75in.x22.5in. 29in.x19.75in.x22.5in. Ship Wt. 164 lbs. 168 lbs. 198 lbs. Net Wt. 142 lbs. 146 lbs. 176 lbs. Noise level tested at seven meters (75% load). Rating represents minimum noise level rating.

Options (Consult price list or www.mitm.com for more information on option descriptions and qualifying models) 32-0915 AW-5090-0003 AW-5740-0009

56

RV generator adapter Lifting hook Wheel kit

Mi-T-M Corporation

800-553-9053

GX-0004 TX-1002-W

www.mitm.com

Hour meter Puncture-proof tires

GFCI 5-20R

L14-20R 125/250 V

L5-30R 125 VAC


Fuel tanks are powder coated outside, zinc-plated inside to prevent rusting

Angled isolator design features four neoprene isolators (Diesel model features six neoprene isolators)

GEN-7500-0MH0

Engine: Low oil shutdown engine (gasoline models) · Industrial Yanmar diesel engine (diesel model) · Electric start available (battery included) (electric start standard on diesel model) · Idle control (gasoline models)

G E N E R AT O R S

P O R TA B L E - G A S O L I N E / D I E S E L 6 0 0 0 , 7 5 0 0 & 8 0 0 0 - M A X I M U M W AT TA G E

Portable

Designed, manufactured and tested in the Mi-T-M quality tradition, this unit is well-suited for the serious contractor with multiple voltage application requirements and additional power needs.

2 2 3 3 3 3 YEAR

YEAR LIMITED

YEAR LIMITED

Alternator: Brushless 120V/240V alternator · Total harmonic distortion (THD) less than 5% · 100% copper windings

YEAR LIMITED

Frame: Low profile, compact design · Heavy-duty wraparound frame with 1-inch powder coated steel tubing

LIMITED YANMAR EN GINE HONDA ENGINE SUBARU ENGINE WARRANTY WARRANTY WARRANTY WARRANTY

ED

YEAR LIMITED

YEAR LIMITED

NE HO N DA ENGINE SUBARU ENGINE WARRANTY WA R R ANTY

*Consult factory for models that comply to California regulations.

Components: Easy-to-read fuel gauge · Fuel shutoff valve · Voltmeter/hour meter · Easy-access and protected control panel with magnetic circuit breaker and GFCIprotected receptacles · Heavy-duty industrial air cleaners hold up under extreme conditions · Large low-tone muffler to reduce noise to lowest level possible (gasoline models) · Exhaust system features an expansion silencer with cover (diesel model) Miscellaneous: USDA/USFS-approved spark arrestors · Circuit breaker protected

Model No. GEN-6000-0MH0^*/GEN-6000-0MS0^* GEN-6000-0MYE* Max. AC Output 6,000 watts 6,000 watts Rated AC Output 5,000 watts 5,000 watts Displacement/HP/Engine 389cc Honda OHV/404cc Subaru OHC 9.2 HP Yanmar Frequency/Voltage 60Hz/120V/240V 60Hz/120V/240V Max. Amps (120V/240V) 50.0/25.0 50.0/25.0 Cont. Amps (120V/240V) 41.7/20.8 41.7/20.8 Receptacles (2) 120V, 20A GFCI duplex (2) 120V, 20A GFCI duplex 120V/240V, 20A twist lock 120V/240V, 20A twist lock 120V, 30A twist lock 120V, 30A twist lock Main Circuit Breakers (2) 20A toggle circuit breaker, single pole (2) 20A toggle circuit breaker, double pole 30A toggle circuit breaker, single pole Rated Speed 3,600 RPM 3,600 RPM Decibel Rating 77.1/77.4 85.0 Fuel Capacity 7.3 gallon 2.6 gallon Run Time (at full load) 8.0 hours/7.9 hours 6.8 hours Dimensions (LxWxH) 29in.x24.4in.x22.5in. 30.125in.x21.62in.x22.5in. Ship Wt. 232 lbs. 295 lbs. Net Wt. 210 lbs. 273 lbs. ^Available with electric start (battery included). Noise level tested at seven meters (75% load). Rating represents minimum noise level rating.

GEN-7500-0MH0^* GEN-8000-0MS0^* 7,500 watts 8,000 watts 6,500 watts 6,900 watts 389cc Honda OHV 404cc Subaru OHC 60Hz/120V/240V 60Hz/120V/240V 62.5/31.25 66.7/33.3 54.2/27.1 57.5/28.75 (2) 120V, 20A GFCI duplex (2) 120V, 20A GFCI duplex 120V, 30A twist lock 120V, 30A twist lock 120V/240V, 30A twist lock 120V/240V, 30A twist lock (2) 20A toggle circuit breaker, single pole 30A toggle circuit breaker, single pole 30A toggle circuit breaker, double pole 3,600 RPM 3,600 RPM 80.0 78.2 7.3 gallon 7.3 gallon 6.9 hours 6.9 hours 29in.x24.4in.x22.5in. 29in.x24.4in.x22.5in. 255 lbs. 245 lbs. 233 lbs. 223 lbs.

Options (Consult price list or www.mitm.com for more information on option descriptions and qualifying models) 32-0915 RV generator adapter AW-5740-0010, AW-5740-0006 Wheel kit AW-5090-0004, AW-5090-0007 Lifting hook TX-1002-W Puncture-proof tires GFCI 5-20R

www.mitm.com

800-553-9053

L14-30R 125/250 V

Mi-T-M Corporation

L5-30R 125 VAC

57


Portable

G E N E R AT O R S

P O R TA B L E - G A S O L I N E 1 2 0 0 0 & 1 3 0 0 0 - M A X I M U M W AT TA G E

NEW FRAME D E S IG N

Designed for the contractor that needs a virtual power plant, this generator is built to withstand even the most demanding application, yet the portability makes it extremely easy to move from jobsite to jobsite. Large low-tone muffler to reduce noise to lowest level possible

Easy-access and protected control panel with magnetic circuit breakers and GFCI-protected receptacles GEN-12000-1MHE

Reinforced 11⁄4-inch powder coated steel tube frame with center balanced lifting hook

Engine: Low oil shutdown engine with electric start (battery included) · Idle control Alternator: Brushless 120V/240V alternator · Total harmonic distortion (THD) less than 5% · 100% copper windings Frame: Solid steel threaded axles · Four pneumatic tires with tubes · Locking tire brake Components: Easy-to-read fuel gauge · Voltmeter/hour meter · Fuel tanks are powder coated outside, zinc-plated inside to prevent rusting · Heavy-duty industrial air cleaners hold up under extreme conditions Miscellaneous: USDA/USFS-approved spark arrestors · Circuit breaker protected Model No. Max. AC Output Rated AC Output Displacement/Engine Frequency/Voltage Max. Amps (120V/240V) Cont. Amps (120V/240V) Receptacles Main Circuit Breakers Rated Speed Decibel Rating Fuel Capacity Run Time (at full load) Dimensions (LxWxH) Ship Wt. Net Wt.

GEN-12000-1MHE* 12,000 watts 10,000 watts 620cc Honda OHV 60Hz/120V/240V 100.0/50.0 83.3/41.7 (2) 120V, 20A GFCI duplex 120V, 30A twist lock 120V/240V, 30A twist lock 120V/240V, 50A (2) 20A toggle circuit breaker, single pole 30A toggle circuit breaker, single pole 30A toggle circuit breaker, double pole 50A toggle circuit breaker, double pole 3,600 RPM 74.9 13.5 gallon 8.8 hours 31.5in.x30.5in.x37.5in. 568 lbs. 508 lbs.

Options (Consult price list or www.mitm.com for more information on option descriptions and qualifying models)

58

RV generator adapter Skid feet

Mi-T-M Corporation

GX-0005 TX-1304-W

800-553-9053

50-amp twist lock receptacle Puncture-proof tires

www.mitm.com

YEAR LIMITED

YEAR LIMITED

LIMITED HONDA ENGINE SUBARU ENGINE WARRANTY WARRANTY WARRANTY

GEN-13000-1MSE* 13,000 watts 11,500 watts 650cc Subaru OHV 60Hz/120V/240V 108.3/54.2 95.8/47.9 (2) 120V, 20A GFCI duplex 120V, 30A twist lock 120V/240V, 30A twist lock 120V/240V, 50A (2) 20A toggle circuit breaker, single pole 30A toggle circuit breaker, single pole 30A toggle circuit breaker, double pole 50A toggle circuit breaker, double pole 3,600 RPM 77.5 13.5 gallon 8.8 hours 31.5in.x30.5in.x37.5in. 573 lbs. 513 lbs.

Noise level tested at seven meters (75% load). Rating represents minimum noise level rating. 32-0915 GX-0003

23 3 YEAR

*Consult factory for models that comply to California regulations.

GFCI 5-20R

L14-30R 125/250 V

14-50R 50A

GX-0005 CS6369A 50 Amp twist lock receptacle

L5-30R 125 VAC


To determine kilowatts (kW), use the following formula:

1,000 Watts = 1 Kilowatt Undersizing the generator can be avoided by considering (Ex. 1,500 Watts/1,000 = 1.5 kW) all of the loads that will be connected to the generator, Charts 1, 2, and 3 will help you in selecting the and by deter­mining the starting requirements (motor proper size generator. With lights, heaters, and start) of electric motor-operated devices. small appliances, simply add the nameplate ratings Be sure the generator you select is large enough to or see Chart 1 for average wattage requirements. handle your present requirements and anticipated For portable electric tools and equipment, check needs. the nameplate rating or use Chart 2 for average requirements. If watts and/or amps are not given To determine the right size generator, add up the total and only the horsepower is shown, use Chart 3 to watts of all lights, appliances, tools, or other equipment determine the starting and running watts. to be connected to the generator. Chart 4 is furnished as a guide for select­ing the Check the nameplates to determine wattage. If wattage proper size of insulated copper wire when extension is not shown, but amps and volts are given, the cables are used. We recom­mend the use of outdoorfollowing simplified formula may be used: rated (U.L.) cable, recognized type SJTW-A. Amps x Volts = Watts (Ex. 12.5 amps x 120 volts = 1,500 watts) Chart 1: Home applications — approximate wattage requirements Equipment Wattage Air conditioner (10,000 BTU) Blanket, electric Broiler Clothes dryer, electric Coffee maker Dishwasher Fan, attic Fan, furnace Fan, window Freezer, food Heater, radiant Hot plate Refrigerator/freezer Sump pump Toaster TV, color Water heater Water pump

2,000–3,000 150 1,400 5,000–10,000 850 1,500–2,500 375 800–1,200 200 300–500 1,300 1,250 600–2,000 400–3,000 1,100–1,700 100–350 3,000–4,500 1,000–3,000

Chart 2: Portable electric tools — approximate wattage requirements Equipment Wattage Equipment

Wattage

Blower, electric Compressors Concrete vibrators, 3⁄4-hp Concrete vibrators, 1-hp Concrete vibrators, 2-hp Concrete vibrators, 3-hp Drain cleaners Drills, 1⁄4-inch Drills, 3⁄8-inch Drills, 1⁄2-inch Drills, 1-inch Grinders, bench Grinders, portable Hammers, demolition Hammers, rotary Heaters, space Lights

⁄2 hp and up 900–1,100 600–1,500 1,200 250 800–1,500 1,000–2,500 2,500 200–800 2–5 hp 1–5 hp 1–3 hp 550 750 600 720 1,200

⁄2–3 hp ⁄4–3 hp 840 1,080 1,560 2,400 250 250–600 300–600 350–1,200 1,000 1 ⁄4–1 hp 1,000–2,500 1,260 1,200 1 ⁄4–2 hp check wattage on bulb 1 1

Chart 3: Motor starting requirements Watts required to start motor Running Repulsion Split Motor (hp) watts induction Capacitor phase 1 ⁄8 275 600 850 1,200

⁄6 ⁄4 1 ⁄3 1 ⁄2 3 ⁄4 1 1 1

275 400 450 600 850 1,100

600 850 975 1,300 1,900 2,500

850 1,050 1,350 1,800 2,600 3,300

2,050 2,400 2,700 3,600 — —

Pump, electric Routers Sanders, belt Sanders, disc Sanders, orbital Saws, chain Saws, circular, 6-inch Saws, cutoff Saws, jig Saws, masonry Saws, radial arm Saws, table Screwdrivers Shears, metal-cutting Wrenches, impact, 1⁄2-inch Wrenches, impact, 3⁄4-inch Wrenches, impact, 1-inch

G E N E R AT O R S

To select an engine-driven generator, you’ll need to determine the power (kilowatt) requirements which must be met under operating conditions.

Sizing

F I N D I N G T H E R I G H T G E N E R AT O R

1

Chart 4: Insulated copper wire size Load in watts Maximum allowable cable length Current at at in 120 240 #4 #6 #8 #10 #12 #14 #16 #18 amperage volts volts wire wire wire wire wire wire wire wire 2.5 300 600 — — — 1,000 600 375 250 150

5.0 7.5 10.0 15.0 20.0 25.0 30.0 35.0 40.0 45.0 50.0

600 1,200 — 900 1,800 — 1,200 2,400 — 1,800 3,600 650 2,400 4,800 500 3,000 6,000 400 3,600 7,200 325 4,200 8,400 275 4,800 9,600 250 5,400 10,800 225 6,000 12,000 200 www.mitm.com

— — 625 400 300 250 200 175 150 — —

— — 400 265 200 150 125 100 — — —

500 330 250 165 125 100 — — — — —

800-553-9053

300 200 150 100 80 — — — — — —

200 125 100 50 — — — — — — —

125 80 50 — — — — — — — —

Mi-T-M Corporation

75 50 35 — — — — — — — —

59


Accessories

G E N E R AT O R S

LIFTING HOOKS/WHEEL KITS/TIRES/ADAPTER/RACK

Lifting Hooks

For easier portability. AW-5090-0003 (Fits 4000 to 5000-watt models) AW-5090-0004 (Fits 6000 to 8000-watt gasoline models) AW-5090-0007 (Fits 6000-watt diesel model) - Made with 1â „4-inch powder coated steel - Bolts to generator with U-bolts - Folds down and out of the way when not in use

GEN-8000-0MSE shown with optional lifting hook (AW-5090-0004)

Generator Display Rack

Compact display rack solves your limited retail floor space issues. AW-9300-0013 (Display rack; includes header card, magnets and literature holder) AW-0013-0154 (Display shelves; 2 max.) 13-0176A18 (Generator stop bracket; 4 max.) - Easy-to-assemble - Requires only 15-square-feet of floor space - Constructed of powder coated metal square tubing - Dim.: 61in. x W x 36in. D x 62in. H

Puncture-Proof Tires

These tires are flat-free and maintenance-free. 10-inch Tires TX-1002-W (Two tires) - 10-inch tire - White hub - Fits 4000 to 8000-watt models - Replacement tires for wheel kit options AW-5740-0006, AW-5740-0009 & AW-5740-0010 - Consult factory before ordering 13-inch Tires TX-1304-W (Four tires) - 13-inch tire - White hub - Fits 12000 & 13000-watt models - Consult factory before ordering

Wheel Kits

For easier portability. AW-5740-0009 (Fits 4000 to 5000-watt models) AW-5740-0010 (Fits 6000 to 8000-watt gasoline models) AW-5740-0006 (Fits 6000-watt diesel model) - (2) 10-inch pneumatic tires with tubes - Dual rubber isolator feet - Powder coated and rubber gripped handles for comfort

*Units sold separately

RV Generator Adapter

Uses the RV generator adapater to connect RV cordsets to 30A generators. 32-0915 - Fits generators 3200-watts or higher - 30A/125V female/male 60

Mi-T-M Corporation

800-553-9053

www.mitm.com

GEN-6000-0MH0 shown with optional wheel kit (AW-5740-0010)


I N D U S T R I A L

Wet/Dry Vacuums

9-GALLON - 13-GALLON - 18-GALLON

www.mitm.com

800-553-9053

Mi-T-M Corporation

61


9-Gallon

Wet and dry filter with no conversion necessary

W E T / D R Y

V A C U U M S

P O R TA B L E - E L E C T R I C

Designed for dependability, stackability, durability and ease of operation, this economical vacuum comes with industrial-quality features.

Wet and dry filter (no conversion necessary)

I N D U S T R I A L

High impact poly construction canister

Industrial-grade caster wheels with plates

MV-900-0MEV

Motor: Two stage blower motor for longer life · Self-cooling motor design Components: Exhaust air ducting reduces the possibility of motor contamination by dirt or moisture · Electrical system is double-protected · 25-foot electrical cord · Electrical cord wrap · Recessed wheels and clamps Miscellaneous: Quiet operation · Stackable design for easy storage · CSA certified Accessories (Each unit includes): · 10-foot x 11⁄4-inch hose with inlet cuff · 141⁄4-inch curved plastic wand · 2-piece aluminum/plastic extension wand · 12-inch combination floor tool · 81⁄2-inch crevice tool · 12-inch commercial squeegee tool · Cartridge filter · 1 paper filter bag (replacement bags sold in packs of 5)

1

YEAR

LIMITED WARRANTY

LIFETIME CANISTER WARRANTY

EXCLUDES NORMAL WEAR ITEMS

Horsepower Water Decibel Model No. Motor (cont.) CFM Waterlift Capacity Recovery Amps Rating* Dimensions (LxWxH) Ship Wt. Net Wt. MV-900-0MEV 120V Two stage bypass 1.3 101 87 in. 9.0 gallons 6.0 gallons 7.5 57.4 14in.x14in.x22in. 36 lbs. 25 lbs. *Most wet/dry vacuums have a decibel rating of 63.4 dB(a).

62

Mi-T-M Corporation

800-553-9053

www.mitm.com


Wands

Aluminum/Plastic Extension Wand 16-0402 - 2-piece - Plastic wand with aluminum inserts Curved Plastic Wand 16-0403 - 141⁄4-inch - Connects hand tools to hose

Tools

Commercial Squeegee Tool 33-0410 - 12-inch high impact plastic - Connects directly to extension wand Combination Floor Tool 33-0411 - 12-inch high impact plastic - Connects directly to extension wand

Filters

Cartridge Filter 19-0221 - Hydrophobic media for wet and dry use Paper Filter Bag 19-0222 - 5 per pack - Disposable; for dry use only - Recommended for fine dusts

33-0410

V A C U U M S

Crevice Tool 33-0412 - 81⁄2-inch high impact plastic - Connects directly to curved plastic wand Dusting Brush 33-0422 - 21⁄2-inch nylon brush - High impact plastic - Connects directly to curved plastic wand

W E T / D R Y

Suction Hose with Inlet Cuff 15-0241 - 10-foot x 11⁄4-inch hose with inlet cuff Suction Hose - Bulk 15-0242 - 11⁄4-inch hose without fittings - Sold by the foot Inlet Cuff 50-0178 - For bulk hose; to connect to vacuum

I N D U S T R I A L

Suction Hoses & Fitting

9-Gallon

S TA N D A R D & O P T I O N A L A C C E S S O R I E S

33-0411 33-0422

33-0412

Q

C D B

P F

G

E

O N I H

J

M

L K

1. 2. 3. 4. 5. 6. 7. 8.

Electrical cord wrap Electrical system is double-protected Two-stage blower motor for longer life Stackable design for easy storage Wet and dry cartridge filter (no conversion necessary) 25-foot electrical cord Disposable paper filter bag (for dry use only) 141⁄4-inch curved plastic wand

9. 10. 11. 12. 13. 14. 15. 16.

10-foot x 11⁄4-inch suction hose with inlet cuff 81⁄2-inch crevice tool Aluminum/plastic extension wand 12-inch commercial squeegee tool 12-inch combination floor tool Industrial grade recessed caster wheels with plates High impact poly construction canister Recessed clamps www.mitm.com

800-553-9053

Mi-T-M Corporation

63


13 & 18-Gallon

V A C U U M S

P O R TA B L E - E L E C T R I C

Wet and dry filter with no conversion necessary

W E T / D R Y I N D U S T R I A L

Popular in the quick-lube industry, these dependable vacuums are designed for professional use and offer reliability, stackability and ease of operation.

Wet and dry filter (no conversion necessary)

High impact poly construction canister with lifetime canister warranty MV-1300-0MEV

MV-1800-0MEV

Industrial-grade polyolefin wheels with stainless-steel shafts

Motor: Two stage blower motor for longer life · Self-cooling motor design Components: Exhaust air ducting reduces the possibility of motor contamination by dirt or moisture · Electrical system is double-protected · 25-foot electrical cord · Electrical cord wrap · Recessed wheels and clamps · Filter efficiency 99.5% to 1.0-micron (optional HEPA filter 99.7% to 0.3-micron) · Drain outlet Miscellaneous: Quiet operation · Stackable design for easy storage · Eliminates airborne particles through exhaust · CSA certified Accessories (Each unit includes): · 10-foot x 11⁄2-inch crushproof hose · 2-piece aluminum extension wand · 14-inch commercial squeegee tool · 12-inch combination floor tool · 103⁄4-inch crevice tool · 5-inch upholstery tool · Cartridge filter · 1 paper filter bag (replacement bags sold in packs of 10)

1

YEAR

LIMITED WARRANTY

LIFETIME CANISTER WARRANTY

EXCLUDES NORMAL WEAR ITEMS

Easily the quietest in the industry, the Mi-T-M industrial vacuum has a decibel rating as low as 51.2...compare that to other vacs that are rated at 59 decibels or highter and you'll hear the difference!

Horsepower Water Decibel Model No. Motor (cont.) CFM Waterlift Capacity Recovery Amps Rating* Dimensions (LxWxH) Ship Wt. Net Wt. MV-1300-0MEV 120V Two stage bypass 1.3 115 93 in. 13.0 gallons 9.0 gallons 6.9 51.2 22in.x18in.x28in. 50 lbs. 38 lbs. MV-1800-0MEV 120V Two stage bypass 1.6 120 102 in. 18.0 gallons 13.0 gallons 8.3 51.5 27in.x19in.x31in. 55 lbs. 44 lbs. *Most wet/dry vacuums have a decibel rating of 63.4 dB(a). 64

Mi-T-M Corporation

800-553-9053

www.mitm.com


Wall Mount Bracket

-1.0 Micron

Dry Pick-Up

+1.0 Micron

99.5% efficient to 1.0-micron - 1.0-micron rating prevents drywall dust from damaging motor - Eliminates airborne particles through exhaust

High Efficiency Particulate Air Recommended for fine dust and clean room applications - Will not clog or deteriorate - Retains maximum air flow - Completely washable - Water resistant

Hose Adapater Kit (#852-0156) For when you need extra hose length How to attach the hose connection kit:

A = Suction Hose (#15-0223) sold per foot B = Tapered Cuff End (#50-0167) C.

C.

Extension Hose

Connects to unit

A.

Connects to wand D.

C.

Original Hose

B.

D.

25-Foot Hose Options

D Q

C

R

E

P

G

F

L

J K

O N

I H

C = Inlet Fittings (2 qty.) (#50-0169) D = Hose Connector (1 qty.) (#50-0168)

Extension Hose

C.

99.7% efficient to 0.3-micron - 0.3-micron rating captures solid particulates, not allowing them back into the air

B

V A C U U M S

HEPA Filter (#19-0234)

W E T / D R Y

Designed for continuous water Wet Pick-Up pick-up - Will not clog or deteriorate - Retains maximum air flow - Completely washable - Water resistant

AW-9500-0000 Our wall mount bracket kit allows for a permanent work cleaning station. Save space by mounting vacuum to the wall.

M

1. 25-foot electrical cord 2. Electrical cord wrap 3. Electrical system is double-protected 4. Two-stage blower motor for longer life 5. Stackable design for easy storage 6. Wet and dry cartridge filter (no conversion necessary) 7. Disposable paper filter bag (for dry use only) 8. 2-piece aluminum extension wand 9. 103⁄4-inch crevice tool 10. 5-inch upholstery tool 11. 10-foot x 11⁄2-inch crushproof suction hose 12. 12-inch combination floor tool 13. 14-inch commercial squeegee tool 14. Industrial grade recessed polyolefin wheels with stainless-steel shafts 15. Drain outlet 16. Recessed clamps 17. High impact poly construction canister

I N D U S T R I A L

Exclusive "Hydro" Flow Filter (#19-0230)

13 & 18-Gallon

S TA N D A R D & O P T I O N A L A C C E S S O R I E S

VX-0001 This option includes 25-foot of 11⁄2-inch crushproof vacuum hose, 10 disposable paper filter bags (#19-0610), crevice tool (#33-0326) and suction hand tool (#33-0371). VX-0002 This option includes 25-foot of 11⁄2-inch crushproof vacuum hose, cloth filter bag (#19-0611), crevice tool (#33-0326) and suction hand tool (#33-0371). VX-0003 This option includes 25-foot of 11⁄2-inch crushproof vacuum hose, vacuum bag liner (#19-0235), crevice tool (#33-0326) and suction hand tool (#33-0371). {Note: These options will remove the 2-piece aluminum extension wand (#16-0391), combination floor tool (#33-0360), commercial squeegee floor tool (#33-0359) and the upholstery tool (#33-0327) that comes standard with the vacuum.}

MV-1300-0MEV & MV-1800-OMEV are shown with VX-0001 option

www.mitm.com

800-553-9053

Mi-T-M Corporation

65


Accessories

V A C U U M S W E T / D R Y I N D U S T R I A L

S TA N D A R D A N D O P T I O N A L

Suction Hoses & Fittings

Suction Hose 15-0207 - 10-foot x 11⁄2-inch crushproof hose with fittings Suction Hose - Bulk 15-0223 - 11⁄2-inch crushproof hose without fittings - Sold by the foot Tapered Cuff End 50-0167 - Hose fitting - connects hose to wand or to hose connector Hose Connector 50-0168 - Hose fitting - connects tapered cuff to hose extension Inlet Cuff Fitting 50-0169 - Hose fitting - connects hose to vacuum Hose Adapter Kit 852-0156 - Includes two inlet fittings and one hose connector

Filters

Cartridge Filter 19-0230 - Hydrophobic media for wet and dry use - Completely washable - Filters to 1.0-micron High Efficiency Particulate Air (HEPA) Filter 19-0234 - 99.7% efficient to 0.3-micron - Recommended for fine dust and clean room applications

Tools

Crevice Tool 33-0361 33-0326 33-0359 - 103⁄4-inch high impact plastic - Connects directly to hose Upholstery Tool 33-0360 33-0327 - 5-inch width; serrated edge - High impact plastic - Connects directly to hose Dusting Tool 33-0328 - 23⁄4-inch nylon brush - High impact plastic - Connects directly to hose 33-0371 33-0328 Commercial Squeegee Tool 33-0359 33-0364 - 14-inch with replaceable rubber blades - High impact plastic - Connects directly to extension wand Combination Floor Tool Replaceable Rubber Blades (not shown) 33-0360 33-0397 (Front blade) - 12-inch with adjustable brush height 33-0398 (Back blade) - High impact plastic - Fits commercial squeegee floor - Connects directly to extension wand tool (#33-0359) 66

Mi-T-M Corporation

800-553-9053

www.mitm.com

Aluminum Extension Wand 16-0391 - 2-piece; friction fit - Chrome-plated

Filter Bags

Paper Filter Bag 19-0610 - 10 per pack - Disposable; for dry use only - Recommended for fine dusts Cloth Filter Bag 19-0611 - Reusable; for dry use only - Machine washable

Vacuum Bag Liner

19-0235 - Fits inside canister to keep filter cartridge clean (dry use only - do not use with paper filter bag)

Accessory Bag & Hose Hanger AW-9500-0001 - Fits both 13 & 18-gallon vacuums - Vacuum hose hanger attaches to top handle - Accessory bag holds two-piece wand assembly and standard floor and hand tools - Made from 600-denier vinyl-backed polyester - Easy to clean with soap and water

33-0362

33-0326 33-0327

Commercial Nylon Brush Floor Tool 33-0361 - 14-inch with nylon brush insert - High impact plastic - Connects directly to extension wand Power Floor Tool 33-0362 - 103⁄4-inch, air powered, belt drive - High impact plastic - Connects directly to extension wand

Suction Wand Tool 33-0364 - 4-inch high impact plastic - Connects directly to extension wand Suction Hand Tool 33-0371 - 4-inch high impact plastic - Connects directly to hose


Jobsite Boxes

H E A V Y- D U T Y - S O L I D S T E E L 6.33 CUBIC FEET - 13.44 CUBIC FEET 25.00 CUBIC FEET - 21.66 CUBIC FEET www.mitm.com

800-553-9053

Mi-T-M Corporation

67


Heavy-Duty

B O X E S J O B S I T E

P O R TA B L E / S K I D - M O U N T - S T E E L

Special tamper-proof armored locking system for protection against break-ins

Convenient swing out handles for additional mobility

Special locking lid support locks the lid open to prevent accidental closings

MB-4822 shown with optional tool tray MX-22

Construction: Reinforced support skids for increased protection and easy transporting · Heavy-duty solid steel construction with full arc welded seams · Full-length concealed hinges are riveted for additional protection and strength · Special powder coated finish for extreme durability · Predrilled skids for easy caster installation · Optional removable tool trays to assist tool management

Padlocks not included. Mi-T-M recommends No. 5 padlocks. Model No. MB-3619 MB-4822 MB-4830 MB-6024

68

Protect your investment with these quality jobsite boxes. Heavy-duty solid-steel construction keeps your valuables secure from theft and shielded from the elements.

Cubic Feet 6.33 13.44 25.00 21.66

Mi-T-M Corporation

Dimensions (LxWxH) 36in.x19in.x16in. 48in.x22in.x22in. 48in.x30in.x30in. 60in.x24in.x26in.

800-553-9053

www.mitm.com

Ship Wt. 83 lbs. 128 lbs. 174 lbs. 177 lbs.

Net Wt. 81 lbs. 123 lbs. 168 lbs. 168 lbs.


B O X E S

Help sort and organize your jobsite box with tool trays. Tool trays increase your inside storage space. Offers a convenient transportable tray for jobs when you need only select tools. MX-19 - One tray fits MB-3619 - Dim.: 16.5in. L x 11in. W x 3in. H - 7.0 lbs. MX-22 - Two trays fit MB-4822 - Dim.: 19.45in. L x 11in. W x 3in. H - 9.0 lbs. MX-30 - Two trays fit MB-4830 - Dim.: 27.5in. L x 11in. W x 3in. H - 12.0 lbs. MX-24 - Two trays fit MB-6024 - Dim.: 21.5in. L x 11in. W x 3in. H - 8.0 lbs.

When mobility is a must, casters are the solution. - Casters are industrial strength with ball bearing wheels that allow for smooth rolling over rough surfaces - Caster sets include two ridged and two swivels with locks MX-4 (4-inch) - Rated for 700 lbs. MX-5 (5-inch) MX-6 (6-inch) - Rated for 800 lbs.

32.5

18.5

16

36

J O B S I T E

Tool Trays

Casters

Accessories

ACCESSORIES - DIMENSIONS

44.5

24.5

22

19

22

48

55.5

60.5

30

32.5

48

26

29

30

24

60

www.mitm.com

800-553-9053

Mi-T-M Corporation

69


I N D U S T R I A L

Space Heaters

K E R O S E N E - P R O PA N E FORCED AIR - RADIANT - CONVECTION H A N D C A R R Y - P O R TA B L E - TA N K T O P - P AT I O

70

Mi-T-M Corporation

800-553-9053

www.mitm.com


H E AT E R S

Hand Carry MH-0070-0M10

Heavy-duty, high quality cast aluminum enclosed electric motor

Built-in temperature control thermostat with control dial (Digital temperature read out on 125 to 215,000 BTU models)

Factory tested for multiple fuels: Kerosene, JP8/Jet A fuel, No. 1 and No. 2 fuel oil and No. 1 and No. 2 diesel fuel

MH-0215-0M10

FEATURED ON ALL MODELS

Frame: Rugged steel body · Extension cord wrap · Powder coated hood and fuel tank Burner Head: Clamped hoses · Secured photo cell · 1-piece cast aluminum · Secured fully insulated ignition connection Components: High performance fan · Power switch · Secured internal components · Integral overheat and flame-out safety · Fuel gauge · Integrated air pressure gauge (not available on MH-0400 model) · Oversized fuel cap · High limit temperature shut-off · Sure start ignition for cold temperature starts · Dual connector ignitor

1

YEAR

LIMITED WARRANTY

Important Notes - Not for use in residential living areas or inadequately ventilated areas - Proper ventilation required during operation - Must be plugged into an approved standard electrical outlet for operation

S PA C E

KEROSENE FORCED AIR H A N D C A R R Y / P O R TA B L E

Kerosene Forced

Our kerosene-fired forced air space heaters are ideal for commercial, industrial and agricultural applications. Portable, easy to operate and extend heat to a wide area creating a comfortable environment from even the most harsh conditions.

MH-0125, MH-0175, MH-0215 & MH-0400 MODELS

Frame: Powder coated steel handles for easy lifting · 10-inch pneumatic wheels (13-inch wheels on MH-0400 model) · Spare parts storage system (located on back of unit) · Fuel drain plug Component: Error indicator read-out

For use in workshops, garages, construction sites and farms with proper ventilation.

Model No. MH-0070-0M10 MH-0125-0M10 Heat Output 70,000 BTU 125,000 BTU Hot-Air Flow (CFM) 240 540 Air Pump Pressure (PSI) 4.0 5.0 AC Power 120 Volt/60Hz/1.5 Amp 120 Volt/60Hz/2.3 Amp Motor Size 1/8 HP 1/5 HP Fuel Tank Capacity 5.0 gal. 10.0 gal. Fuel Consumption .53 gal./hr. .95 gal./hr. Max. Operating Hours 9.0 10.0 Heating Area 1,700 sq. ft. 3,100 sq. ft. Multi-Fuel Capable Yes Yes Dimensions (LxWxH) 30in.x12in.x15in. 39in.x23in.x26in. Ship Wt. 33 lbs. 60 lbs. Net Wt. 28 lbs. 54 lbs.

MH-0175-0M10 MH-0215-0M10 MH-0400-0M10 175,000 BTU 215,000 BTU 400,000 BTU 630 670 1,400 7.5 9.0 8.5 120 Volt/60Hz/2.7 Amp 120 Volt/60Hz/2.8 Amp 120 Volt/60Hz/2.8 Amp 1/4 HP 1/3 HP 1/2 HP 13.0 gal. 13.0 gal. 24.0 gal. 1.34 gal./hr. 1.63 gal./hr. 3.05 gal./hr. 9.5 8.0 8.0 4,300 sq. ft. 5,300 sq. ft. 10,000 sq. ft. Yes Yes Yes 43in.x24in.x26in. 43in.x24in.x26in. 58in.x30in.x25in. 68 lbs. 71 lbs. 152 lbs. 61 lbs. 64 lbs. 143 lbs.

Specifications subject to change without notice. Use in accordance with any and all state or local codes, regulations, and/or ordinances. Please see heater "Owner's Manual" included with each heater for a complete list of important safety information.

www.mitm.com

800-553-9053

Mi-T-M Corporation

71


Propane Forced

MH-0150-LM10

S PA C E

H E AT E R S

Our hand carry propane forced air space heaters feature enclosed gas controls and heavy-duty steel construction. Ready to use - just connect to propane cylinder and plug-in.

P R O PA N E F O R C E D A I R H A N D C A R R Y - L P / N AT U R A L G A S

10-foot hose and regulator (not available on MH-0150-NM10)

Adjustable height angle for heat where you need it (except on MH-0375 model)

MH-0375-LM10

One touch ignition and heat control for easy operation

FEATURED ON ALL MODELS

Frame: Heavy-duty steel construction · Easy-lift handle for portability at home or on the jobsite · Adjustable height angle (except on MH-0375 model)) Components: High performance fan · Automatic shut-off if power is interrupted or flame is extinguished · Enclosed gas controls · Electronic ignition · Propane inlet connector - connects heater to propane tank via a supply hose Heat Output: Variable BTUs (MH-0050-LM10 & MH-0150-LM10)

MH-0050 MODEL

Propane: Will operate on 20 lb. cylinder

1

YEAR

ALL OTHER MODELS

Heat Output: Adjustable thermostat (MH-0150-LMT0, MH-0150-NM10 & MH-0375-LM10)

LIMITED WARRANTY

For use in workshops, garages, construction sites and farms with proper ventilation. Model No. MH-0050-LM10 MH-0150-LM10 Heat Output 50,000 BTU 120-135-150,000 BTU Hot-Air Flow (CFM) 300 400 AC Power 120V/60Hz/ 120V/60Hz/ Less than 1.0 Amp Less than 1.0 Amp Motor Size 1/10 HP 1/9 HP Fuel Propane Propane Fuel Consumption 2.3 lbs./hr. 5.5 / 6.2 / 6.9 lbs./hr. Required Cylinder Size 20 lbs. 100 lbs. Max. Operating Hours (per required cylinder size) 11.0 18.0 Heating Area 1,000 sq. ft. 3,800 sq. ft. Dimensions (LxWxH) 18.1in.x7.7in.x12.8in. 25.1in.x9in.x15.5in. Ship Wt. 19 lbs. 29 lbs. Net Wt. 15 lbs. 23 lbs. *Models include thermostat.

MH-0150-LMT0* 150,000 BTU 400 120V/60Hz/ Less than 1.0 Amp 1/9 HP Propane 6.9 lbs./hr. 100 lbs. 18.0 3,800 sq. ft. 25.1in.x9in.x15.5in. 29 lbs. 23 lbs.

Specifications subject to change without notice. Use in accordance with any and all state or local codes, regulations, and/or ordinances. Please see heater "Owner's Manual" included with each heater for a complete list of important safety information.

72

Mi-T-M Corporation

800-553-9053

www.mitm.com

Important Notes - Not for use in residential living areas or inadequately ventilated areas - Proper ventilation required during operation - Must be plugged into an approved standard electrical outlet for operation

MH-0150-NM10* 150,000 BTU 435 120V/60Hz/ Less than 1.0 Amp 1/9 HP Natural Gas 150 cu. ft./hr. N/A

MH-0375-LM10* 375,000 BTU 1,500 120V/60Hz/1.45 Amp

N/A 3,800 sq. ft. 25.1in.x9in.x15.5in. 35 lbs. 24 lbs.

11.5 9,000 sq. ft. 34in.x12.6in.x18.5in. 49 lbs. 41 lbs.

1/5 HP Propane 17.3 lbs./hr. (2) 100 lbs.


S PA C E

G A S - F I R E D - H A N D C A R R Y - P R O PA N E

H E AT E R S

Convection

The industrial-duty propane convection space heater heats quietly and with ease by using convection heat. Powerful instant heat with no electricity required.

360-degree heat radius for even heating of room

Inner windshield protects burner flame from being extinguished

MH-0080-CM10

10-foot hose and regulator

MH-0200-CM10

FEATURED ON ALL MODELS Frame: Quick assembly 2-piece burn chamber 路 Durable steel housing

1

YEAR

LIMITED WARRANTY

Important Notes - Not for use in residential living areas or inadequately ventilated areas - Proper ventilation required during operation - Extremely hot during operation. Keep children, animals and all combustible objects away from heater.

Model No. Heat Output Ignition Type Fuel Fuel Consumption Operating Time (100 lb. Cyl.) (hrs.)* Operating Time (40 lb. Cyl.) (hrs.)* Operating Time (20 lb. Cyl.) (hrs.)* Suggested Cylinder Size Heating Area Dimensions (LxWxH) Ship Wt. Net Wt.

Heat Output: Variable heat settings Components: Matchless piezo spark ignitor for easy lighting 路 Operates on a standard 100 lb. propane cylinder 路 Automatic shut-off if flame is extinguished

MH-0080 MODEL Component: Single handed controls for easy operation

For use in workshops, construction sites, farms and loading docks with proper ventilation. MH-0080-CM10 50-60-80,000 BTU Automatic (integral) Propane 2.3 / 2.8 / 3.7 lbs./hr. L-43 / M-35 / H-27 L-17 / M-14 / H-11 L-8 / M-7 100 lbs. 1,800 sq. ft. 15.7in.x15.7in.x21.8in. 17 lbs. 12 lbs.

MH-0200-CM10 50-200,000 BTU Push-button Propane 4.62 / 9.25 lbs./hr. L-43 / M-17 / H-10.5 N/A N/A 100 lbs. 4,600 sq. ft. 16in.x16in.x26.4in. 20 lbs. 14 lbs.

*Operating times at Low, Medium and High Settings. Specifications subject to change without notice. Use in accordance with any and all state or local codes, regulations, and/or ordinances. Please see heater "Owner's Manual" included with each heater for a complete list of important safety information. These specifications are estimates only.

www.mitm.com

800-553-9053

Mi-T-M Corporation

73


Radiant

K E R O S E N E R A D I A N T - P O R TA B L E

Easy-lift handle for portability at home or on the jobsite

S PA C E

H E AT E R S

Mi-T-M kerosene radiant space heaters maximize radiant output for natural and soothing warmth. These space heaters will keep you comfortable even with lower air temperatures.

Heat safety grille

Factory tested for multiple fuels: Kerosene, JP8/Jet A fuel, No. 1 and No. 2 fuel oil and No. 1 and No. 2 diesel fuel

MH-0125-RM10

1

Motor: Fully enclosed motor for longer life Frame: Compact design · Two wheels for easy mobility

YEAR

Heat Output: Adjustable heat height · Clean, quiet, instant radiant heat Components: Ultra quiet fuel pump · Power switch · Electronic controls · Error indicator light · Integral overheat and flame-out safety · Contractor-grade fuel cap

LIMITED WARRANTY

For use in any outdoor application and car wash bays. Model No. MH-0125-RM10 Heat Output 95-125,000 BTU Heat Type Radiant AC Power 120V/60Hz/Less than 1.0 Amp Fuel Tank Capacity 12.5 gal. Fuel Tank Consumption .9 gal./hr. Max. Operating Hours 13 - High / 18 - Low Heating Area 3,125 sq. ft. Dimensions (LxWxH) 24.6in.x27.8in.x38.6in. Ship Wt. 98 lbs. Net Wt. 84 lbs. Specifications subject to change without notice. Use in accordance with any and all state or local codes, regulations, and/or ordinances. Please see heater "Owner's Manual" included with each heater for a complete list of important safety information. These specifications are estimates only.

74

Mi-T-M Corporation

800-553-9053

www.mitm.com

Radiant Heat Output

Important Notes - Not for use in residential living areas or inadequately ventilated areas - Proper ventilation required during operation


H E AT E R S

Safety shut-off valve

High efficiency heat reflector MH-0030-IM10

Heat regulator knob

MH-0015-IM10

1

YEAR

LIMITED WARR ANTY

Important Notes - Not for use in residential living areas or inadequately ventilated areas - Proper ventilation required during operation

S PA C E

P O R TA B L E - TA N K T O P H E AT I N G

Propane Radiant

For convenient, versatile radiant heat, these propane tank top heaters are great for outdoor use. Just connect to a standard 20 pound propane cylinder for up to 48 hours of heating.

*Propane tank not included

Frame: Heavy-duty construction · Cast aluminum manifold · Rust-proof chrome emitter guard · Rear burner safety guard · Swivel burner head (MH-0030 only) Heat Output: Variable heat control valve · Clean, quiet, instant radiant heat Components: Hand wheel connection for valve · Standard propane tank connection

For use in open workshops, construction sites, farms and for any other outdoor heating need. Model No. MH-0015-IM10 Heat Output (Single Burner)* L-9,000 / M-12,000 / H-15,000 BTU Heat Output (Double Burner)* N/A Ignition Type Match light Heat Settings 3 Propane Cylinder Size 20 lbs. Max. Operating Hours (20 lb. Cyl.) L-48 / M-36 / H-28 Dimensions (LxWxH) 8.5in.x6.5in.x12.5in. Ship Wt. 4 lbs. Net Wt. 3 lbs.

MH-0030-IM10 L-9,000 / M-12,000 / H-15,000 BTU L-18,000 / M-24,000 / H-30,000 BTU Match light 6 20 lbs. L-48 / M-18 / H-14 17.5in.x6.5in.x18in. 8 lbs. 7 lbs.

*Heat output and operating hours are at Low, Medium and High Settings. Specifications subject to change without notice. Use in accordance with any and all state or local codes, regulations, and/or ordinances. Please see heater "Owner's Manual" included with each heater for a complete list of important safety information. These specifications are estimates only.

www.mitm.com

800-553-9053

Mi-T-M Corporation

75


Outdoor Patio

Sleek and attractive, this model provides up to a 210 square foot radius of heat on a patio or deck, and is sure to keep the coolest guests warm. Perfect for where clean, quiet and instant heat is a must.

360-degree heat radius for even heating

S PA C E

H E AT E R S

O U T D O O R P AT I O H E AT E R - P O R TA B L E P R O P A N E - R A D I A N T H E AT

Wind resistant burner system prevents flame from being extinguished, with automatic shut-off if flame is extinguished

18-inch base diameter

1

YEAR

MH-0040-PM10

Frame: Heavy-duty stainless-steel emitter screen · Stainless-steel finish · Rust resistant reflector material · 5-piece reflector assembly · Easy slide cylinder compartment cover · Large diameter support post

LIMITED WARRANTY

Heat Output: Variable heat settings Components: Built-in safety tip-over switch · Hose and regulator standard · Single handed ignition controls · Piezo spark push-button ignition

For use on outdoor patios, decks and outdoor restaurants. Model No. MH-0040-PM10 Heat Output 22,500 - Low / 40,000 BTU - High Fuel Propane Fuel Consumption 1.85 lbs./hr. Manifold Pressure 11-inch W.C. Operating Time (20 lb. Cyl.) (hrs.) 10.8 Suggested Cylinder Size 20 lbs. Heating Area 210 sq. ft. Dimensions (LxWxH) 32.3in.x32.3in.x88in. Ship Wt. 68 lbs. Net Wt. 59 lbs.

Wheel Kit Option (Consult price list or www.mitm.com for more information) Attaches to bottom of heater base, allowing for easy portability, powder coated steel

Specifications subject to change without notice. Use in accordance with any and all state or local codes, regulations, and/or ordinances. Please see heater "Owner's Manual" included with each heater for a complete list of important safety information. These specifications are estimates only.

76

Mi-T-M Corporation

800-553-9053

www.mitm.com

Important Notes - Not for use in residential living areas or inadequately ventilated areas - Proper ventilation required during operation - Extremely hot during operation. Keep children, animals and all combustible objects away from heater.


Mi-T-M builds safe, reliable products. In the U.S., UL, CSA International and ETL are accredited by the Occupational Health and Safety Administration (OSHA) as a Nationally Recognized Testing Laboratory (NRTL). Generally speaking, all OSHA accredited laboratories conduct their tests against the same set of U.S. standards and codes, regardless of who authors or publishes them. Having undergone detailed scrutiny of our technical competence, integrity and certification testing facility, Mi-T-M is authorized by CSA to perform much of the product certification work in-house with NRTL audits to guarantee credibility. The mark of CSA, ETL or UL on a Mi-T-M product is an added assurance of safety. CSA Group - the Canadian Standards Association - for standards development, information products, sale of publications, training and membership services. CSA International - for product testing and certification; also test to applicable U.S. standards, which include ANSI, UL, CSA, NSF and others. QMI - for management systems registration. CSA marks appear on over one million products worldwide. Intertek's ETL Semko division has been the global leader in the testing, inspection and certification of products for over 100 years, dating back to Thomas Edison's Electrical Testing Laboratories (ETL). The ETL listed mark is the legal equivalent of the UL-listed and CSA-listed marks, designated by OSHA and the Standards Council of Canada. When Mi-T-M products bear Intertek's proprietary ETL-listed mark, the letters ETL will carry with them a long history of innovation, influence and independence.

u Eq

ent ipm

Trade A sso ci at

nP io

nd ar d

s

Ma

ance Sta

Cleaning Equipment Trade Association

Performance Certified

rm erfo

red To C factu lea nu ni ng

UL, "Underwriters Laboratories Inc.", the trusted source across the globe for product compliance. UL has tested products for public safety for more than a century. UL offers one of the conformity assessment industry's broadest portfolios of capabilities and certification marks. Their unique mix of local expertise in global markets and deep industry knowledge helps bring safer products to market.

TM

Mi-T-M Corporation's pressure washers have received certification from CETA under the CETA Performance Certification Standard. This standard clearly defines performance criteria and test procedures for certification of hot and cold water pressure washers. CETA certification guarantees the buyer that products are designed, built and tested to rigid performance standards. Machines must operate within +/-5% of advertised performance rating. Data for all Performance Certified models are on file at CETA headquarters, and periodic peer reviews ensure consistent quality. The International Boiler and Pressure Vessel Code establishes rules of safety governing the design, fabrication and inspection of boilers and pressure vessels, and nuclear power plant components during constructions. In the formulation of its rules and in the establishment of maximum design and operating pressures, the Committee considers technological advances including materials, construction, methods of fabrication, inspection, certification, and overpressure protection. The objective of the rules is to provide a margin of deterioration in service. Advancements in design and material and the evidence of experience are constantly being added by Addenda.

Safety Certifications

S A F E T Y & P R O D U C T C E R T I F I C AT I O N S

Originating in 1914, the ASME Boiler and Pressure Vessel Code is now adopted in part or in its entirety, by 49 states and numerous municipalities and territories of the United States and all the provinces of Canada. CSA International is the principal product testing, certification and standards development organization serving the gas industry in the U.S. and Canada We are the number one source for gas product approvals in North America and the only organization that issues the familiar Blue Star mark for the U.S. and the Blue Flame mark for Canada. CSA International is uniquely qualified to test and certify that gas appliances and accessories meet applicable U.S. standards. Since 1925, the Blue Star approval mark has been the mark of choice for gas-fired appliances and accessories in the U.S. We test products for conformance with all applicable ANSI and CSA gas standards. CSA marked products are used and sold in the U.S. everyday. www.mitm.com

800-553-9053

Mi-T-M Corporation

77


How To Order

I N F O R M AT I O N O R D E R I N G

O R D E R I N G I N F O R M AT I O N Extended Hours To serve you better, our customer service hours of operation are: Monday - Friday ... 7:30 am to 5:30 pm CST Products may be ordered or inquires sent 24 hours a day, 7 days a week via fax. How To Order Units and accessories are ordered through authorized Mi-T-M dealers and distributors. - Be prepared to advise the Mi-T-M Customer Service Representative of your Mi-T-M account number, model numbers, parts and descriptions. - Indicate your purchase order number and full name on order. - Specify exact shipping instructions. - With fax and/or mail-in orders, give full name, Mi-T-M account number, zip code and telephone number. Phone Fax Mail Internet/E-mail 563-556-7484 563-556-1235 Mi-T-M Corporation www.mitm.com 800-553-9053 8650 Enterprise Drive corp@mitm.com Peosta, IA 52068 Internet - www.mitm.com Our website may be instantly accessed and offers: - 4-color viewing of products and specifications - Other services offered by Mi-T-M - A site search to find the equipment that's right for you - Company profile including Who's Who of Mi-T-M - A listing of dealers throughout the country - Quick e-mail access for questions and information requests about specific models or product lines - Mi-T-M on-line parts ordering and access to parts listings for the full Mi-T-M product lines Sales Policy Products are sold through authorized Mi-T-M dealers, National Accounts and OEMs as recognized by Mi-T-M. All new customers must complete a credit application. Mi-T-M will perform a credit check and upon approval, the customer will receive an account number and a line of credit. Production Schedule Customers can anticipate a lead time of one week for cold water pressure washers, air compressors, air compressor/generators, portable generators, space heaters, jobsite boxes, and wet/dry vacuums; a two week lead time for hot water pressure washers. Special units will require additional lead time. Shipping Orders shipped without specific shipping instructions are shipped "best way" as determined by Mi-T-M shipping department. Mi-T-M assumes no responsibility and makes no guarantees regarding air freight deliveries. Please allow seven working days before requesting tracking on lost or late shipments. In an effort to deliver Mi-T-M products to our customers in a timely manner, Mi-T-M developed a program where whole goods (pressure washers, air compressors, air compressor/generators, portable generators, space heaters, jobsite boxes, and wet/dry vacuums) and parts are shipped from separate locations in our facility. Our freight policy has not changed. Our customers are still responsible for outgoing freight on parts and whole goods. This may be altered by any minimum qualifying freight programs. Because our goal is to process all orders as soon as we receive them, our system will no longer allow additional items to be added to a previously processed order. Any additional orders will be handled as a new order. Freight Terms - All parts and water treatment system - F.O.B. Peosta - Any combination of pressure washers, air compressors, air compressor/generators, portable generators, space heaters, wet/dry vacuums - may qualify for prepaid freight - Jobsite boxes - prepaid on 1,000 lbs. or more - Detergents - prepaid on twelve cases - Parts - prepaid and add - Trailer units - prepaid and add Warranty All warranty claims and returns of goods for repair shall be governed by the express terms of the Mi-T-M warranty, as provided in the conditions of our warranty, and limited to the replacement of defective parts, as provided in the conditions of the Mi-T-M warranty. Merchandise Return Mi-T-M must be contacted before any product can be returned. The customer will receive a Returned Goods Authorization (RGA) number prior to the item being returned. Mi-T-M reserves the right to refuse returned product. Products must be in new and resalable condition. Products must be current production components. All products must be returned freight prepaid at shippers expense. Products returned C.O.D. for any reason will be refused. Credit not to exceed original purchase price will be issued on returned products approved for return subject to a 20% restocking fee. Submission of Claims All damages to merchandise - either internal or external - must be reported to the carrier shipping such merchandise, to permit an inspection report to be filed immediately. Claims for shortage of cartons, crates or boxes must be properly submitted to the carrier; claims for errors or shortages in contents must be submitted to Mi-T-M within 24 hours after delivery of such merchandise.

78

Mi-T-M Corporation

800-553-9053

www.mitm.com


Mi-T-M Corporation would like to take this opportunity to thank the following suppliers for their support in making Mi-T-M a leader in the manufacturing of pressure washers, air compressors, portable generators, water treatment systems, wet/dry vacuums, jobsite boxes and space heaters.

Honda Engines have long been recognized as the industry leader in providing reliable, easy-starting and fuel-efficient small engines. You’ll find Honda GX Series engines on a wide variety of rental, construction and premium power equipment.

Subaru Robin's advanced technology, chain driven OHC engines, provide easier starting, lower noise and more power to give maximum performance on your Mi-T-M pressure washer, air compressor and generator.

General Pump offers the highest standard of customer service, pumps, components and technology available in the industry. GP is dedicated to exceeding the needs of the pressure washer industry today and in the future.

AR, recognized worldwide as the leading manufacturer of triplex plunger pumps, is renowned for their high level of quality, consistency and flexibility. Distinctions in technological design and methods have contributed to leading the industry standards of today. Innovative and effective advancements in pump design are attributed to AR.

FLEXIBLE HOSE SYSTEMS

Schieffer is a major producer of flexible hose systems in the industrial and consumer pressure washer industry. Because of our advanced technologies and connecting techniques, we have become the choice of major OEM customers.

Since its inception in 2005, Pinnacle Products International has established itself as the go-to supplier for high quality, high value portable industrial comfort products and offers unparalleled quality and value in portable construction heaters and ventilation products. In a continued commitment to improve quality, Mi-T-M reserves the right to make component or design changes when necessary.

Thank You

THANK YOU TO OUR SUPPLIERS

Suttner, the leading manufacturer of pressure washer parts, has been producing German engineered connectors, guns, wands, tips, and attachments for 40 years. Manufactured for top performance, Suttner components are a valuable addition to keep your customer’s equipment up and running, year in and year out. Suttner America Company provides timely shipping throughout North America from our fully stocked warehouse.

Since 1854 CURTIS-TOLEDO, Inc. has been designing and manufacturing solutions for industry. The FSCURTIS Air Compressors brand continues to be the symbol of quality and excellence in the design and manufacture of reciprocating air compressors, rotary-screw compessors and oil free compressors.

Mi-T-M Corporation 8650 Enterprise Drive · Peosta, IA 52068 800-553-9053 · 563-556-1235 fax www.mitm.com · corp@mitm.com ©Copyright 2010 Mi-T-M® Corporation

www.mitm.com

800-553-9053

113009

Mi-T-M Corporation

79



Mi-T-M Industrial Catalog