9 mento hoses and couplings 30 09 2015 quick couplings low

Mento Hoses and Couplings Catalogue

9. Quick Couplings

Quick Couplings •

Snap Tite H Series

• • • • • • • • • • • • • • • • • • • • •

Snap Tite 61 - Parker 6600 Series ISO A Snap-Tite 72 - Parker 60 Series ISO B Snap Tite 78 - Parker 6100 Series Snap Tite 75 Series Snap Tite 71 Series Tema T Series Tema HP 1500 Series Faster VVS Series Parker 3000 Series BOP QR 74 Series Rectus 23 Series Rectus 96 Series Cam-Lock Cam-Lock type King Crimp Claw Couplings Air Receiver Manifold Assembly Laux Model C Nor Couplings TW Couplings Storz Couplings Boss Couplings

9.

9-1 9-2 9-3 9-4 9-5 9-6 9-7 9-8 9-9 9-10 9-11 9-12 9-13 9-14 9-15 9-17 9-18 9-19 9-20

9-21 9-22 4. EDITION

Mento Hoses and Couplings Catalogue

H, IH & PH Series -- Couplings for Hydraulic, 9-1. Quick Couplings Pneumatic and General Purpose Use

Featuring...Snap-tite H, quality with in reliability and flow characteristics over the competition.

IH & PHbuilt Series -- Couplings for Hydraulic, Pneumatic and General Purpose Use H Series

Featuring...Snap-tite quality with built in reliability andAdvantages flow characteristics of overH theSeries competition.

Couplings for Hydraulic, Pneumatic andSizes General Use — 1/8”Purpose – 4”

Metals — Hof Series Quick Disconnect Couplings Advantages H Series Advantages of H Series are available in four metals – steel, brass, aluminum —— 1/8” – 4” •Sizes Sizes 1/8” – 4” and 316 stainless steel. A variety of protective finishes •Metals Metals Series Quick Disconnect Couplings are available in four —— HH Series Quick Disconnect Couplings are available.

Please consult factory. are available four metals steel, brass,and aluminum metals –insteel, brass,–aluminum 316 stainless steel. A variety of andprotective 316 stainless steel. A variety protective finishes Seal Versatility —ofWide choice of standard finishes are available.

Please consult factory.

Pleaseseal consult factory.enable the H, IH & PH and Versatility special materials •are available.

Seal — Wide choice of standard and special seal series to handle athe great variety fluids.

Seal Versatility Wide choice standard materials enable— H, IH & PHofof series to handle a great variety of andfluids. special seal materials enable the H, IH & PH Sleeve Lock — Sleeve lock option aids in series to handle a great variety of fluids. preventing accidental disconnection of the coupling.

Sleeve Lock — Sleeve To disconnect, alignlock the option pin in aids the in body with the slot preventing accidental disconnection of the coupling. in the sleeve and retract sleeve.

To disconnect, align the pin in the body with the slot

in the(Valve sleeve and& retract sleeve. Quick Disconnect Valve) — The two-piece body Low Drop (Valve & Pressure Valve) Quick Disconnect The two-piece body than the Lowconstruction Pressure Drop permits—larger flow passages construction permits larger flow passages than the designated size of the coupling, permitting greater SNAP TITE H SERIES QUICK CONNECTORS designated size of the coupling, permitting greater flow while maintaining low pressure drop and H SERIES COUPLING NPT FEMALE CARBON STEELflow while maintaining low pressure dropNPT and FEMALE CARBON STEEL H SERIES NIPPLE provides end fitting versatility. provides endPart fitting versatility.

Part Body Thread Thread Body Material Body Thread Thread Body Material Smooth Flow ——Snap-tite’s “JetStream” Stream” valve design maintain cleanflow. linear flow.positioning Positive Number Size Size “Jet Smooth Flow Snap-tite’s valve design helpshelps maintain a cleanalinear Positive Number Size Size positioning ofVHC4-4F the valve aids ininmaintaining steady, even flow under normal working conditions. 1/4" of the valve aids maintaining even flow under normal working conditions.

VHN4-4F 1/4" NPT FEM CARBON STEEL 1/4" 1/4"aa steady, NPT FEM CARBON STEEL

2

3/8" 3/8" NPT FEM VHC6-6F 3/8" 3/8" NPT are FEM CARBON STEEL openVHN6-6F Flow Connection — Valves to automatically in bothintheboth coupler nippleand halves Flow onon Connection — Valves aredesigned designed to automatically open the and coupler nipple halves CARBON STEEL VHN8-8F 1/2" 1/2" NPT FEM CARBON STEEL VHC8-8F 1/2" 1/2" NPT maximum FEM CARBON STEEL when unit connected permitting freefree flow.flow. when thethe unit is isconnected permitting maximum VHN12-12F 3/4" 3/4" NPT FEM CARBON STEEL VHC12-12F 3/4" 3/4" NPT FEM CARBON STEEL Shut-off On Disconnection — Valves are designed to automatically close under normal usage conditions Shut-off On Disconnection — Valves areis disconnected. designed to automatically VHN16-16Fclose under1" normal1"usage NPTconditions FEM CARBON STEEL VHC16-16F 1" nipple1"halves NPTwhen FEM CARBON STEEL in both the coupler and the unit inVHC20-20F both the coupler and nipple unit is disconnected.

VHN20-20F 1 1/4" 1 1/4" NPT FEM CARBON STEEL 1 1/4" 1 1/4"halves NPT when FEM theCARBON STEEL Fast Efficient Operation — Connect disconnectSTEEL in seconds. To connect, pull back the sleeve, insertNPT the FEM VHN24-24F 1 1/2" 1 1/2" CARBON STEEL VHC24-24F 1 1/2" 1 1/2" NPT FEM orCARBON Fast Efficient Operation — sleeve.

Connect or disconnect in seconds.

Toremove connect, pull back thehalves sleeve, insert the nipple into the coupler and release the To disconnect, pull back the sleeve, the nipple and the VHN32-32F 2" 2" NPT FEM CARBON STEEL VHC32-32F 2" 2" NPT FEM CARBON STEEL are into disconnected. nipple the coupler and release the sleeve. To disconnect, pull back the sleeve, remove the nipple and the halves are disconnected.

H SERIES NIPPLE NPT FEMALE STAINLESS STEEL H SERIES COUPLING NPT FEMALE STAINLESS Dependable Operation — Ball-lock mechanismSTEEL provides positive connection.

Hardened stainless steel balls along with Body a radiused and induction hardenedBody (steel)Material ball race gives extended life to the H SeriesThread couplings. Thread Part Body Part Thread Thread Dependable Operation — Ball-lock mechanism provides positive connection. Hardened stainless steel Body Material Number Number Size Connected Sizeinduction Positive — Two types of(steel) seals are available with H Series quick disconnects. balls along withSealing a radiused and hardened ball race gives extended lifeSize to the HSize Series couplings.

SVHN4-4F 1/4" NPT FEM STAINLESS STEEL SVHC4-4F 1/4" 1/4" NPT FEM STAINLESS STEEL Molded U-Packer Seal – Standard for all sizes; provides contact over several times the normal O-ring1/4" sealing Positive Sealing Connected — Two types of STEEL seals arefeature available with HaSeries SVHN6-6F 3/8"quick 3/8" SVHC6-6F 3/8"U-packer 3/8"sealNPT FEM STAINLESS area. The unique design embodies a self-energizing that permits positive seal atdisconnects. all NPT FEM STAINLESS STEEL SVHN8-8F 1/2"O-ring NPT FEM STAINLESS STEEL SVHC8-8F NPT STEEL pressures.

The 1/2" design enables theFEM coupling to seal under adverse such times as side1/2" load,normal scratches on Molded U-Packer Sealalso –1/2" Standard for allSTAINLESS sizes; provides contactconditions over several the sealing nipple from3/4" usage abuse or NPT dirt on the nipple.

SVHN12-12F 3/4"a positive 3/4" seal NPTatFEM SVHC12-12F 3/4"seal FEM STAINLESS STEEL area.theThe unique U-packer design embodies a self-energizing feature that permits all STAINLESS STEEL SVHN16-16F 1" 1" NPT FEM on STAINLESS STEEL SVHC16-16F 1" –also 1" supplied NPTthe FEM STAINLESS Optional Seal (-9) Can enables be ascoupling standard in of the U-Packer seal in steel and stainless pressures.

The design to place sealSTEEL under adverse conditions such as sidesteel load, scratches SVHN20-20F 1/4" 1or 1/4" NPT FEM STAINLESS STEEL SVHC20-20F 1 1/4" STAINLESS STEEL sizes 1/4” thru 1-1/4”. for use with high pressure, multiple-cycle1hydraulic the construction nipple from1in1/4" usage abuse orNPT dirtFEM onDesigned the nipple. pneumatic applications, set consists of a standardSTEEL O-ring and aSVHN24-24F Teflon back-up ring.

This seal 1 1/2" 1 1/2" NPT FEM STAINLESS STEEL SVHC24-24F 1 1/2" 1 the 1/2"sealNPT FEM STAINLESS Optional Seal (-9) as STAINLESS standard in STEEL place of the U-Packer in steel stainless configuration prevents the be sealsupplied from FEM extruding under multiple-cycle high flow and seal pressure surge applications.

SVHN32-32F 2" and 2" NPTsteel FEM STAINLESS STEEL SVHC32-32F 2"– Can 2" NPT construction in sizes 1/4” thru 1-1/4”. Designed for use with high pressure, multiple-cycle hydraulic or Positive Sealing Disconnected — The metal to metal contact of the valve with the coupler or nipple SERIES NIPPLE BSPThis FEMALE H SERIESapplications, COUPLING BSP FEMALE CARBON pneumatic the seal set consists of aSTEEL standard O-ring and a H Teflon back-up ring. seal CARBON STEEL body is designed to control compression of the valve seal eliminating wear and increasing seal life. configuration prevents the seal from extruding under multiple-cycle pressure surge applications.

Parthigh flow andBody Thread Thread Body Material Part Body Thread Thread Body Material Number Size Size Number Size Size Positive Sealing Disconnected — The metal to metal contact of the valve with the coupler or nipple VHN4-4RP 1/4" 1/4" BSP FEM CARBON STEEL VHC4-4RP 1/4" 1/4" BSP FEM CARBON STEEL 2 body is designed to control compression of the valve seal eliminating wear and increasing seal life.

VHN6-6RP 3/8" 3/8" BSP FEM CARBON STEEL VHC6-6RP 3/8" 3/8" BSP FEM CARBON STEEL VHN8-8RP 1/2" 1/2" BSP FEM CARBON STEEL VHC8-8RP 1/2" 1/2" BSP FEM CARBON STEEL VHN12-12RP 3/4" 3/4" BSP FEM CARBON STEEL VHC12-12RP 3/4" 3/4" BSP FEM CARBON STEEL VHN16-16RP 1" 1" BSP FEM CARBON STEEL VHC16-16RP 1" 1" BSP FEM CARBON STEEL VHN20-20RP 1 1/4" 1 1/4" BSP FEM CARBON STEEL VHC20-20RP 1 1/4" 1 1/4" BSP FEM CARBON STEEL VHN24-24RP 1 1/2" 1 1/2" BSP FEM CARBON STEEL VHC24-24RP 1 1/2" 1 1/2" BSP FEM CARBON STEEL VHN32-32RP 2" 2" BSP FEM CARBON STEEL VHC32-32RP 2" 2" BSP FEM CARBON STEEL H SERIES COUPLING BSP FEMALE STAINLESS STEEL Part Body Thread Thread Body Material Number Size Size SVHC4-4RP 1/4" 1/4" BSP FEM STAINLESS STEEL SVHC6-6RP 3/8" 3/8" BSP FEM STAINLESS STEEL SVHC8-8RP 1/2" 1/2" BSP FEM STAINLESS STEEL SVHC12-12RP 3/4" 3/4" BSP FEM STAINLESS STEEL SVHC16-16RP 1" 1" BSP FEM STAINLESS STEEL SVHC20-20RP 1 1/4" 1 1/4" BSP FEM STAINLESS STEEL SVHC24-24RP 1 1/2" 1 1/2" BSP FEM STAINLESS STEEL SVHC32-32RP 2" 2" BSP FEM STAINLESS STEEL

H SERIES NIPPLE BSP FEMALE STAINLESS STEEL Part Body Thread Thread Body Material Number Size Size SVHN4-4RP 1/4" 1/4" BSP FEM STAINLESS STEEL SVHN6-6RP 3/8" 3/8" BSP FEM STAINLESS STEEL SVHN8-8RP 1/2" 1/2" BSP FEM STAINLESS STEEL SVHN12-12RP 3/4" 3/4" BSP FEM STAINLESS STEEL SVHN16-16RP 1" 1" BSP FEM STAINLESS STEEL SVHN20-20RP 1 1/4" 1 1/4" BSP FEM STAINLESS STEEL SVHN24-24RP 1 1/2" 1 1/2" BSP FEM STAINLESS STEEL SVHN32-32RP 2" 2" BSP FEM STAINLESS STEEL

1

H

D (Hex)2

Size

E (Hex)2

1/4" 3/8" 1/2" Mento Hoses and Couplings Catalogue in

E (Hex)2

3/4"

1.34 1.50 1.62 1.91 A mm 34.04 38.10 41.15 48.51 1.00 1.19 1.39 1.63 in B 25.40 30.23 35.31 41.40 mm in 1.32 1.52 1.72 1.92 C mm 33.53 38.61 43.69 48.77 H SERIES NIPPLE .88 NPT MALE 1.00 STAINLESS 1.19 STEEL1.50 in D2 mm 22.35Thread 25.40 Thread 30.23 Body Material 38.10 Part Body in .63 .81 1.00 1.19 2 Number Size Size 20.57 E mm 16.00 25.40 30.23 SVHN4-4Min 1/4".58 1/4" .71 NPT FEM .72 STAINLESS .88 STEEL H SVHN6-6M 3/8" 3/8" 18.03 NPT FEM STAINLESS STEEL 14.73 18.29 22.35 mm SVHN8-8M 1/2".78 1/2" .98 NPT FEM1.01 STAINLESS1.14 STEEL in K SVHN12-12M 3/4" 3/4" 24.89 NPT FEM STAINLESS STEEL mm 19.81 25.65 28.96 SVHN16-16M 1".56 1" .69 NPT FEM .88 STAINLESS1.06 STEEL in 14.22 1 1/4" 17.53 22.35 26.92 J2 mm 1 1/4" SVHN20-20M NPT FEM STAINLESS STEEL 1.27 1 1/2" 1.44 in SVHN24-24M 1 1/2" NPT FEM1.72 STAINLESS1.86 STEEL mm L 32.26 43.69 47.24 SVHN32-32M 2" 2" 36.58 NPT FEM STAINLESS STEEL

9-2. Quick Couplings

H SERIES COUPLING NPT MALE CARBON STEEL Part Body Thread Thread Body Material Number Size Size VHC4-4M 1/4" 1/4" NPT MALE CARBON STEEL VHC6-6M 3/8" 3/8" NPT MALE CARBON STEEL VHC8-8M 1/2" 1/2" NPT MALE CARBON STEEL VHC12-12M 3/4" 3/4" NPT MALE CARBON STEEL VHC16-16M 1" 1" NPT MALE CARBON STEEL VHC20-20M 1 1/4" 1 1/4" NPT MALE CARBON STEEL VHC24-24M 1 1/2" 1 1/2" NPT MALE CARBON STEEL VHC32-32M 2" 2" NPT MALE CARBON STEEL H SERIES COUPLING NPT MALE STAINLESS STEEL Part Body Thread Thread Body Material Number Size Size SVHC4-4M 1/4" 1/4" NPT MALE STAINLESS STEEL SVHC6-6M 3/8" 3/8" NPT MALE STAINLESS STEEL SVHC8-8M 1/2" 1/2" NPT MALE STAINLESS STEEL SVHC12-12M 3/4" 3/4" NPT MALE STAINLESS STEEL SVHC16-16M 1" 1" NPT MALE STAINLESS STEEL SVHC20-20M 1 1/4" 1 1/4" NPT MALE STAINLESS STEEL SVHC24-24M 1 1/2" 1 1/2" NPT MALE STAINLESS STEEL SVHC32-32M 2" 2" NPT MALE STAINLESS STEEL H SERIES NIPPLE NPT MALE CARBON STEEL Part Body Thread Thread Body Material Number Size Size VHN4-4M 1/4" 1/4" NPT FEM CARBON STEEL VHN6-6M 3/8" 3/8" NPT FEM CARBON STEEL VHN8-8M 1/2" 1/2" NPT FEM CARBON STEEL VHN12-12M 3/4" 3/4" NPT FEM CARBON STEEL VHN16-16M 1" 1" NPT FEM CARBON STEEL VHN20-20M 1 1/4" 1 1/4" NPT FEM CARBON STEEL VHN24-24M 1 1/2" 1 1/2" NPT FEM CARBON STEEL VHN32-32M 2" 2" NPT FEM CARBON STEEL

1"

2

2.07 52.58 2.00 50.80 2.10 53.34 1.88 47.75 1.50 38.10 .91 23.11 1.16 29.46 1.38 35.05 2.13 54.10

1

Other special end fittings available upon request.

PLUGS AND CAPS Dimensions across the flats. Round stockPressure with two milled flat Size Plastictaken Plastic Aluhex Plug Alu Cap flats same as dimensions across hex flats. Max O.D. of round Plug Cap Cap stock wil stock.

Valve coupler and nipple bodies may be supplied from round ba 1/4" PDP-4 PDC-4 AMPH-4 ADCH-4 MCH-4 3 3.5" mm) across flats - may substitute (95.25 mm) roun 3/8" (88.9 PDP-6 PDC-6 hex AMPH-6 ADCH-6 3.75"MCH-6 4 Notch Hex indicates British parallel threads. MCH-8 1/2" on PDP-8 PDC-8 RPAMPH-8 ADCH-8 3/4" PDP-12 PDC-12 AMPH-12 ADCH-12 MCH-12 1" PDP-16 PDC-16 AMPH-16 ADCH-16 MCH-16 ACCESS 1 1/4" AMPH-20 ADCH-20 MCH-20 Dust caps, dust plugsMCH-24 and pressure ca 1 1/2" AMPH-24 ADCH-24 and otherADCH-32 contaminants.

Dust caps an 2" AMPH-32 MCH-32 2

Plastic Caps and Plugs Inexpensive means to protect your inve to fit over pipe fitting or affixing to equip Plastic Dust Cap PDC

Metal Dust Plug AMPH

Plastic Dust Plug PDP

Metal Dust Cap ADCH

Metal Pressure Cap MCH

SIZES 1/4" 3/8" WORKING PRESSURES* 1/2" Quick Valve & Valve (Double Shut-off) 3/4" Disconnect Valve & Plain (Single Shut-off) Steel Aluminium Brass Stainless Steel 1" Steel Size PSI Bar PSI Bar PSI Bar PSI Bar 1-1/4" PSI Bar 1/4" 6500 448 2250 155 2250 155 5000 345 1-1/2" 11000 759 3/8" 4500 310 2250 155 2250 155 4000 276 11000 759 2" 1/2" 4000 276 1750 121 2000 138 3750 259 11000 759 3/4" 3500 241 1750 121 2000 138 2000 138 2-1/2" 9000 621 3" 1" 2000 138 1500 103 1750 121 2000 138 6000 414

Aluminum Dust Caps and Plugs Alternate method to protect your equip in sizes 1/4" thru 3". The 1/4" thru 3/4" The 1" and above come with steel zin

Pressure Caps Pressure-tight pressure caps for nipple materials such as brass, aluminum and 3". Sizes 1/4" thru 3/4" come with 10" le 12" of cable-all with adjustable loop at e

PLASTIC PLUG PLASTIC CAP PDP-4 PDC-4 PDP-6 PDC-6 PDP-8 Plain & Plain (No Shut-off) PDC-8 PDP-12 PDC-12 Aluminium Brass Stainless PDP-16 PDC-16Steel

PSI Bar PSI Bar PSI Bar 4000 276 4000 276 10000 690 4000 276 4000 276 8000 552 4000 276 4000 276 8000 552 3500 241 3500 241 7000 483 3000 207 3000 207 4000 276 6 1-1/4" 1750 121 375 26 350 24 1500 103 5000 345 1000 69 1000 69 3000 207 1-1/2" 1500 103 375 26 350 24 1500 103 5000 345 1000 69 1000 69 3000 207 2" 1500 103 300 21 400 28 500 34 4000 276 750 52 750 52 1000 69 2-1/2" 1000 69 300 21 400 28 400 28 1000 69 300 21 400 28 400 28 3" 750 52 200 14 200 14 400 28 750 52 200 14 200 14 400 28 4" 500 34 150 10 150 10 300 21 500 34 150 10 150 10 300 21 NOTE: Pressure ratings were established under static pressure conditions. Therefore, pressure ratings for any given flow, pressure surge, and/or vibration may vary from these ratings.

Pressure and Flow Data Pressure ratings of standard quick disconnects can be increased for some applications by slight design modifications or if specific operating conditions are met. On applications requiring higher ratings than those listed or pressure surges, please consult the factory. Burst pressures listed were taken at the point at which failure rendered the quick disconnect inoperative. (Proof pressure equals 1-1/2 times the working pressure; burst pressure equals 2 times working pressure.) *For Det Norske Veritas (DNV) compliance, divide the working pressures shown by 2.

AL

Mento Hoses and Couplings Catalogue

9-3. Quick Couplings H, IH & PH Series -- Couplings for Hydraulic, Pneumatic and General Purpose Use

61 Series - Parker 6600 Series quality with — builtISO in reliability and flow characteristics over the competition.

61 Series A Interchange -Featuring...Snap-tite ISO A Interchange Featuring…Snap-tite quality with superior pressure and flow

Advantages of Hand Series Featuring…Snap-tite quality with superior pressure flow characteristics over the competition Sizes — 1/8” – 4” characteristics over the competitionMetals — H Series Quick Disconnect Couplings • • • • • • • • •

Interchangeable other in manufacturers arewith available four metals – steel, brass,offering aluminum Interchangeable with other manufacturers ISO Series A couplings offering ISO Series A couplings and 316 stainless steel. A variety of protective finishes

Dimensional & performance requirements conform to ISO 7241-1 Series A

available. Please consult factory.

Dimensional are & performance requirements 4:1 Safety conform to ISOFactor 7241-1 Series A

Seal Versatility Wide choice of standard Proven ball-lock mechanism— provides positive connection Poppet style shut-off series to handleprovides a great variety of fluids.

Proven ball-lock mechanism High connection strength steel construction positive Sleeve Lock — Sleeve lock option aids in Zinc Trivalent Chromate plating= for corrosion resistance preventing accidental disconnection of the coupling.

Poppet style shut-off Choice ofToseal materials to the handle variety fluids disconnect, align pin ina the bodyof with the slot High strength Sizes 1/4"insteel –the 1" construction sleeve and retract sleeve.

4:1 Safety Factor and special seal materials enable the H, IH & PH

Zinc Trivalent Chromate plating= for (Valve & Valve) Quick Disconnect corrosion resistance

Low Pressure Drop — The two-piece body

Choice of sealconstruction materials to handle a variety permits larger flow passages than the of fluids designated size of the coupling, permitting greater

flow while maintaining low pressure drop and Sizes 1/4" – 1" =

provides end fitting versatility.

Conforms with ROHS and WEEE European Union Directives

Smooth Flow — Snap-tite’s “Jet Stream” valve design helps maintain a clean linear flow. Positive positioning of the valve in maintaining even flow under normal working conditions.

Snap-tite's 61aids Series is designeda steady, to conform to the dimensional and performance

SNAP TITE 61 SERIES QUICK CONNECTORS 61 SERIES NIPPLE BSP FEMALE CARBON STEEL requirements of ISO 7241-1 Series A,are which details the testing, performance and Flow on Connection —INTERCHANGE Valves designed to automatically openPart in both the couplerBody and nipple halves Thread ISO A SERIES Thread Body Material when the unit is connected permitting maximum free flow. dimensions of the nipple. This is to enable interchangeability with couplings Number Size Size 61 SERIES COUPLING NPT FEMALE CARBON STEEL produced by other manufacturers who same standard.

Snap-tite's Shut-off On Body Disconnection — meet Valvesthe areBody designed to automatically close under normal 61N4-4RP 1/4"usage conditions 1/4" BSP FEM CARBON STEEL Part Thread Thread Material 61 Series superior working pressures, flow characteristics and safety in both features the coupler and nipple halves when the unit is disconnected.

61N6-6RP 3/8" 3/8" BSP FEM CARBON STEEL Number Size Size factors, making the 61 Series the premier ISOorSeries A interchange.

61N8-8RP 1/2" 1/2" BSP FEM CARBON STEEL Fast Efficient Operation — Connect disconnect in seconds.

To connect, pull back the sleeve, insert the 61C4-4F 1/4" 1/4" NPT FEM CARBON STEEL 3/4" and 3/4" BSP FEM CARBON STEEL nipple into the coupler and release the sleeve. To disconnect, pull back the61N12-12RP sleeve, remove the nipple the halves 61C6-6F 3/8" 3/8" NPT FEM CARBON STEEL are disconnected.

61N16-16RP 1" 1" BSP FEM CARBON STEEL PRESSURE RATINGS 61C8-8F 1/2" 1/2" NPT FEM CARBON STEEL Dependable Operation — Ball-lock mechanism provides positive connection.

Hardened stainless steel 61C12-12F 3/4" 3/4" NPT FEM CARBON STEEL MAXIMUM WORKING MINIMUM BURST MAXIMUM CONNECT BY HAND balls along with a radiused hardened (steel) ball race gives extended life to the H Series couplings.

SIZE 61C16-16F 1" BAR and1"induction NPT CARBON STEEL PSI PSIFEM BAR PSI BAR Positive Sealing Connected — Two types of seals are available with H Series quick disconnects.

PLUGS AND CAPS 1/4" 61 SERIES 4,600 COUPLING 317 BSP FEMALE 18,400 CARBON 1269 STEEL 150 10 Molded U-Packer Seal – Standard for all sizes; provides contact over several times the normal O-ring sealing Size Dust Plug Dust Cap 3/8" 4,600 317 18,400 1269 150 10 Part area. The unique BodyU-packer Threadseal design Thread Body Material feature that permits a positive seal at all 1/4" 61PDP-4 61PDC-4 1/2" 4,000 276 16,000 embodies 1103a self-energizing 100 7 Number Size pressures.

TheSize design276 also enables the coupling1103 to seal under adverse conditions such as side 3/4" 4,000 16,000 50 3 3/8"load, scratches onPDP-8 PDC-8 the nipple from1/4" usage abuse dirt on the nipple.

61C4-4RP 1/4"orBSP FEM CARBON STEEL 1" 3,000 207 12,000 828 40 3 1/2" 61PDP-8 PDC-12 61C6-6RP BSP FEM CARBON Optional Seal 3/8" (-9) – Can3/8" be supplied as standard in placeSTEEL of the U-Packer seal in steel and 3/4"stainless steel 61PDP-12 61PDC-12 61C8-8RP FEM CARBON STEEL construction in1/2" sizes 1/4”1/2" thru BSP 1-1/4”.

Designed for use with high pressure, multiple-cycle 1" hydraulic or 61PDP-16 61PDC-16 pneumatic applications, the seal set consists of a standard O-ring and a Teflon back-up ring.

This seal 61C12-12RP 3/4" 3/4" BSP FEM CARBON STEEL configuration prevents seal BSP from FEM extrudingCARBON under multiple-cycle 61C16-16RP 1" the 1" STEEL high flow and pressure surge applications.

Positive Sealing Disconnected — The metal to metal contact of the valve with the coupler or nipple 61 SERIES NIPPLE NPT FEMALE CARBON STEEL body is designed to control compression of the valve seal eliminating wear and increasing seal life.

Part Number 61N4-4F 2 61N6-6F 61N8-8F 61N12-12F 61N16-16F

Size 1/4" 3/8" 1/2" 3/4" 1"

Body Thread Thread Size Size 1/4" 1/4" NPT FEM 3/8" 3/8" NPT FEM 1/2" 1/2" NPT FEM 3/4" 3/4" NPT FEM 1" 1" NPT FEM

Maximum Working PSI Bar 4,600 317 4,600 317 4,000 276 4,000 276 3,000 207

Body Material

CARBON STEEL CARBON STEEL CARBON STEEL CARBON STEEL CARBON STEEL PRESSURE RATINGS Minimum Burst PSI Bar 18,400 1269 18,400 1269 16,000 1103 16,000 1130 12,000 828

Maximum Connect by hand PSI Bar 150 10 150 10 100 7 50 3 40 3

3

Mento Hoses and Couplings Catalogue

9-4. Quick Couplings H, IH & PH Series -- Couplings for Hydraulic, Pneumatic General Purpose Use 72 Series — ISO Series Band Interchange

72 Series - Parker 60 Series quality with built in reliability and flow characteristics over the competition.

-Featuring...Snap-tite ISO Series B Interchange Featuring…Snap-tite quality with superior pressure and flow characteristics over the competition.

• • • • • •

Sizes 1/8" – 1"

Sizes 1/8" – 1" Advantages of H Series Steel, stainless steel (303 & 316) and brass are standard Wide choice of seal materials to Sizes — 1/8” – 4” handle a variety of fluidsof seal materials to handle a variety of fluids Wide choice Metals —H Series Quick Disconnect Couplings Proven ball-lock mechanism Proven ball-lock mechanism provides positive connection provides positive connection are available in four metals – steel, brass, aluminum Poppet styleshut-off double shut-off Poppet style double and 316 stainless steel. A variety of protective finishes Industry interchangeability…

Industry interchangeability…couplers (sockets) and nipples (plugs) are interchangeable are available. Please consult factory. couplers (sockets) and nipples (plugs) interchangeable with withareother manufacturers other manufacturers Steel, stainless steel (303 & 316) and brass are standard

Seal Versatility — Wide choice of standard and special seal materials enable the H, IH & PH series to handle a great variety of fluids.

SNAP TITEis 72 SERIES 72 SERIES NIPPLE NPT FEMALE STAINLESS STEEL Snap-tite's 72 Series designed to meetISO-B or exceed QUICK ISO 7241-1CONNECTORS Series B. This ISO Sleeve Lock — Sleeve lock option aids in specification stipulates the test specification of the couplings and the dimensions of Part Bodyof the Thread Body Material 72soSERIES COUPLING NPT FEMALE CARBON meeting STEELpreventing accidental the nipple the couplings will interchange with those of other manufacturers disconnection coupling.Thread this same specification. Snap-tite's 72 Series features superior pressure and flow Number Size Size To disconnect, align the pin in the body with the slot Part Body Thread Thread Body Material characteristics over the other manufacturers making the 72 Series the premier ISO Industrial Interchange. in the sleeve S72N4-4F and retract sleeve. 1/4" 1/4" NPT FEM STAINLESS STEEL Number 72C4-4F 72C6-6F 72C8-8F STEEL 72C12-12F MAXIMUM SIZE WORKING 72C16-16F

Size Size 3/8" 3/8" NPT FEM STAINLESS STEEL (Valve & S72N4-4F Valve) Quick Disconnect 1/4" 1/4" NPT FEM CARBON STEEL S72N4-4F 1/2" two-piece bodyNPT FEM STAINLESS STEEL Low Pressure Drop — The1/2" 3/8" 3/8" NPT FEM CARBON STEEL PRESSURE RATINGS S72N12-12F 3/4" 3/4" construction permits larger flow passages than theNPT FEM STAINLESS STEEL Double Valved) 1/2"shut-off (Valved 1/2" and NPT FEM CARBON STEEL designated size of the coupling, permitting greater S72N16-16F 1" 1" NPT FEM STAINLESS STEEL STAINLESS STEEL BRASS 3/4" 3/4" NPT FEM CARBON STEEL MINIMUM MAXIMUM MINIMUM MAXIMUM MINIMUM flow while maintaining low pressure drop and BURST 1" WORKING 1" BURST FEMWORKING BURST STEEL NPT CARBON SERIES NIPPLE BSP FEMALE CARBON STEEL provides end fitting 72 versatility.

PSI

BAR

PSI

BAR

PSI

BAR

PSI

BAR

PSI

BAR

PSI

5,000

345

20,000

1,380

4,000

280

16,000

1,105

3,000

210

12,000

BAR

727,500 SERIES COUPLING NPT FEMALE STAINLESS STEEL — Snap-tite’s “Jet Stream” helps maintainPart a clean linear flow.Body PositiveThread positioning Thread 1/4" Smooth 520 Flow 30,000 2,070 5,500 380 22,000 1,520 3,750 valve 260 design 15,000 1,035 Number Size Size 3/8" 5,000 345 20,000 1,380 3,750 260 15,000 1,035 2,750 190 11,000 760 of the valve aids in maintaining a steady, even flow under normal working conditions.

Part Body Thread Thread Body Material 1/8"

830

Body Material

1/2" 5,000 345 20,000 1,380 3,750 260 15,000 1,035 3,000 210 12,000 830 72N4-4RP 1/4" 1/4" BSP FEM CARBON STEEL Number Size Size 3/4" Flow 4,000 on 280 Connection 16,000 1,105 3,000 210 12,000 830 designed 2,200 155 to8,800 610 — Valves are automatically open in both the coupler and nipple halves 72N6-6RP 3/8" 3/8" BSP FEM CARBON STEEL 1" 4,000 280 16,000 1,105 3,000 210 12,000 830 1,500 105 6,000 415 S72C4-4F 1/4" 1/4" NPT maximum FEM STAINLESS when the unit is connected permitting free flow. STEEL 72N8-8RP 1/2" 1/2" BSP FEM CARBON STEEL S72C4-4F 3/8" 3/8" NPT FEM STAINLESS STEEL Shut-off On Disconnection — Valves are designed to automatically close under normal usage conditions 72N12-12RP 3/4" 3/4" BSP FEM CARBON STEEL S72C4-4F 1/2" 1/2"halves NPTwhen FEMtheSTAINLESS STEEL in both the coupler and nipple unit is disconnected.

72N16-16RP 1" 1" BSP FEM CARBON STEEL S72C12-12F 3/4" 3/4" NPT FEM STAINLESS STEEL Fast Efficient Operation — Connect or disconnect in seconds.

To connect, pull back the sleeve, insert the S72C16-16F 1" 1" NPT FEM STAINLESS STEEL 72remove SERIES BSPtheFEMALE nipple into the coupler and release the sleeve. To disconnect, pull back the sleeve, theNIPPLE nipple and halves STAINLESS STEEL Part Body Thread Thread Body Material are72disconnected.

SERIES COUPLING BSP FEMALE CARBON STEEL Number Size Size Part Thread — Ball-lock Thread mechanism Body Material DependableBody Operation provides positive connection. Hardened stainless steel S72N4-4RP 1/4" BSP FEM STAINLESS STEEL balls along with aSize radiused Size and induction hardened (steel) ball race gives extended life to the H1/4" Series couplings.

Number S72N4-4RP 3/8" 3/8" BSP FEM STAINLESS STEEL 72C4-4RP 1/4" Connected 1/4" BSP FEM CARBON Positive Sealing — Two types of sealsSTEEL are availableS72N4-4RP with H Series quick disconnects.

1/2" 1/2" BSP FEM STAINLESS STEEL 72C6-6RP 3/8" 3/8" BSP FEM CARBON STEEL Molded U-Packer Seal – Standard for all sizes; provides contact over several times the normal O-ring3/4" sealing S72N12-12RP 3/4" 72C8-8RP 1/2"U-packer 1/2"sealBSP FEM CARBON STEEL feature that permits a positive seal at all BSP FEM STAINLESS STEEL area. The unique design embodies a self-energizing S72N16-16RP 1" 1" BSP FEM STAINLESS STEEL 72C12-12RP 3/4" also3/4" BSP STEEL pressures. The design enables theFEM couplingCARBON to seal under adverse conditions such as side load, scratches on 72C16-16RP 1" abuse1"or BSP FEM CARBON STEEL the nipple from usage dirt on the nipple.

PLUGS AND CAPS Optional Seal (-9) – Can be supplied as standard in place of the U-Packer seal in steel and stainless steel Dust Plug Size Dust Cap 72 SERIES COUPLING BSP FEMALE STAINLESS STEEL construction in sizes 1/4” thru 1-1/4”. Designed for use with high pressure, multiple-cycle hydraulic or 1/8" 72PDP-2 72PDC-2 Part pneumatic applications, Body Thread Thread Material the seal set consists of aBody standard O-ring and a Teflon back-up ring.

1/4"This seal 72PDP-4 72PDC-4 Number Size Size configuration prevents the seal from extruding under multiple-cycle high flow and pressure surge applications.

3/8" 72PDP-6 72PDC-6 S72C4-4RP 1/4" 1/4" BSP FEM STAINLESS STEEL Positive Sealing Disconnected — The metal to metal contact of the valve with 1/2" the coupler or nipple 72PDP-8 72PDC-8 S72C4-4RP 3/8" 3/8" BSP FEM STAINLESS STEEL body is designed to control compression of the valve seal eliminating wear and increasing seal life.

3/4" 72PDP-12 72PDC-12 S72C4-4RP 1/2" 1/2" BSP FEM STAINLESS STEEL 1" 72PDP-16 72PDC-16 S72C12-12RP 3/4" 3/4" BSP FEM STAINLESS STEEL INTERCHANGEABLE WITH: S72C16-16RP 1" 1" BSP FEM STAINLESS STEEL 2 PARKER SERIES 60 / HANSEN HK / ETC 72 SERIES NIPPLE NPT FEMALE CARBON STEEL Part Body Thread Thread Body Material Number Size Size 72N4-4F 1/4" 1/4" NPT FEM CARBON STEEL 72N6-6F 3/8" 3/8" NPT FEM CARBON STEEL 72N8-8F 1/2" 1/2" NPT FEM CARBON STEEL 72N12-12F 3/4" 3/4" NPT FEM CARBON STEEL 72N16-16F 1" 1" NPT FEM CARBON STEEL

Size 1/8" 1/4" 3/8" 1/2" 3/4" 1"

PRESSURE RATINGS Double shut-off (Valved and Valved) Steel Stainless Steel Brass Maximum Working Minimum Burst Maximum Working Minimum Burst Maximum Working Minimum Burst PSI Bar PSI Bar PSI Bar PSI Bar PSI Bar PSI Bar 5,000 345 20,000 1,380 4,000 280 16,000 1,105 3,000 210 12,000 83 7,500 520 30,000 2,070 5,500 380 22,000 1,520 3,750 260 15,000 1,035 5,000 345 20,000 1,380 3,750 260 15,000 1,035 2,750 190 11,000 760 5,000 345 20,000 1,380 3,750 260 15,000 1,035 3,000 210 12,000 830 4,000 280 16,000 1,105 3,000 210 12,000 830 2,200 155 8,800 610 4,000 280 16,000 1,105 3,000 210 12,000 830 1,500 105 6,000 415

4

78 Series — Thread-to-Connect Couplings Mento Hoses and Couplings Catalogue

5

9-5. Quick Couplings

Featuring…Snap-tite quality with superior pressure and flow H, IH over & PH Series -- Couplings for Hydraulic, characteristics the competition

Pneumatic and- General Purpose 78 Series Parker 6100UseSeries quality with built in reliability and flow characteristics over the competition. with Aeroquip 5100 Series -Featuring...Snap-tite Thread-to-Connect Couplings Interchangeable and Parker 6100 Series

Advantages of H Series • Interchangeable with Aeroquip 5100 Series and

Heavy duty wing nut or hex nut for easy connection ofnut threaded units Heavy duty wing nut or hex for easy connection

Sizes — 1/8”Parker – 4” 6100 Series

•

Metals — H Series Quick Disconnect Couplings of threaded unitsbrass, aluminum are available in four metals – steel, (207 bar) operating • 3,000 (207 bar) operating pressure and 316 stainless steel.psig A 3,000 variety of psig protective finishes are available. factory.

• Please 4,500consult psig (310 bar) proof pressure

• Sizes 3/4", 3/4"choice x 1/2", 1-1/4" 1-1/2" psig (310and bar) proof Seal Versatility — 4,500 Wide of1",standard and special seal materials enable the H, IH & PH series to handle a great variety of fluids.

Sizes 3/4", 3/4" x 1/2", 1",

Sleeve Lock — Sleeve lock option aids in preventing accidental disconnection of the coupling.

To disconnect, align the pin in the body with the slot in the sleeve and retract sleeve.

pressure

pressure 1-1/4" and 1-1/2"

(Valve & Valve) Quick Disconnect Low Pressure Drop — The two-piece body construction permits larger flow passages than the designated size of the coupling, permitting greater flow while maintaining low pressure drop and provides end fitting versatility.

SNAP TITE— 78Snap-tite’s SERIES QUICK CONNECTORS Smooth Flow “Jet Stream” valve design helps maintain a clean linear flow. Positive positioning of 78 theSERIES valve aids in maintaining a steady, even flow under normal working conditions. 78 SERIE8 NIPPLE BSP FEMALE BRASS COUPLING NPT FEMALE CARBON STEEL

Part Body Thread Thread Material openPart Flow on Connection — Valves are designedBody to automatically in both the couplerBody and nipple halves Thread Thread Body Material when the unit is connected permitting maximum free flow.

Number Size Size Number Size Size B78N12-12RP 1/4"usage conditions 1/4" BSP FEM BRASS B78C12-12F 3/4" 3/4" NPT—FEM Shut-off On Disconnection Valves are designedBRASS to automatically close under normal B78N16-16RP 3/8" 3/8" BSP FEM BRASS B78C16-16F 1" nipple1"halves NPTwhen FEMthe unit is disconnected.

BRASS in both the coupler and B78N20-20RP 1/2" 1/2" BSP FEM BRASS B78C20-20F 1 1/4" 1 1/4" NPT FEM BRASS Fast Efficient Operation — Connect or disconnect in seconds. To connect, pull back the sleeve, insert the 3/4" and 3/4" BSP FEM BRASS B78C24-24F 1 1/2" and1 1/2" FEM To disconnect,BRASS nipple into the coupler releaseNPT the sleeve. pull back theB78N24-24RP sleeve, remove the nipple the halves ALSO AVAILABLE WITHOUT WINGNUT (WITH HEX NUT) ON are disconnected.

78 SERIES COUPLING BSP FEMALE BRASS REQUEST DependableBody Operation provides positive connection. Hardened stainless steel Part Thread — Ball-lock Thread mechanism Body Material Interchangeable with Aeroquip 5100 Series and Parker 6100 balls along with a radiused and induction hardened (steel) ball race gives extended life to the H Series couplings.

Number Size Size Series Positive Sealing — Two types of seals are available with H Series quick disconnects.

B78C12-12RP 3/4" Connected 3/4" BSP FEM BRASS AND CAPS* B78C16-16RP 1" Seal – Standard 1" BSP for FEM Molded U-Packer all sizes; providesBRASS contact over several times the normalPLUGS O-ring sealing area. The unique design embodies a self-energizing a positive at all B78C20-20RP 1 1/4"U-packer 1 1/4"sealBSP FEM BRASS feature that Sizepermits Protective CapsealProtective Plug Mounting Flange pressures. The1 design enables theFEM coupling to seal under adverse conditions as side load, scratches on B78C24-24RP 1/2" also 1 1/2" BSP BRASS 3/4" such78DC-12 78DP-12 78F-12 the nipple from usage abuse or dirt on the nipple.

1" 78DC-16 78DP-16 78F-16 78 SERIES NPT FEMALE BRASSin place of the U-Packer seal in steel and stainless steel Optional Seal (-9)NIPPLE – Can be supplied as standard 1 1/4" 78DC-20 78DP-20 78F-20 Part construction Body Thread Material in sizes Thread 1/4” thru 1-1/4”.

DesignedBody for use with high pressure, multiple-cycle hydraulic or 78DP-24 1 1/2" 78DC-24 78F-24 pneumatic applications, the seal set consists of a standard O-ring and a*All Teflon back-up ring.

This seal Number Size Size accessories are manufactured from carbon steel. configuration prevents the seal NPT from FEM extruding under multiple-cycle B78N12-12F 3/4" 3/4" BRASS high flow and pressure surge applications.

B78N16-16F 1" Disconnected 1" NPT FEM— The metal toBRASS Positive Sealing metal contact of the valve with the coupler or nipple B78N20-20F 1/4" NPT FEM BRASS wear and increasing seal life. body is designed1to1/4" control1 compression of the valve seal eliminating B78N24-24F 1 1/2" 1 1/2" NPT FEM BRASS

Snap-tite heavy duty 78 Series Thread-to-Connect Couplings are designed for most industrial fluid applications plus they are ideal for coal trucks, oil well equipment, hydraulic dump trucks, sand and salt spreaders requiring a rugged coupling.

The 78 series dry break features minimal spillage and air inclusion. The couplings connect under pressure. For bulkhead mounting, a steel flange is available. The 78 Series offers up to 3,000 psig (207 bar) operating pressure in both the connected and disconnected positions.

PRESSURE RATINGS

2

SIZE

PSI

BAR

3/4"

3000

207

PRESSURE RATINGS SPILLAGE PSI Bar cc MAXIMUM 3000 207 1" 3000 207 1-1/4" 2750 190 1-1/2" 2500 172 .30 .15 *Pressure ratings for connected or disconnected modes.

190

.65

OPERATING PRESSURE* BRASS

1"

3000

207

1-1/2"

2500

172

1-1/4"

2750

AIR INCLUSION Size cc MAXIMUM 3/4"

*Pressure ratings for connected or disconnected modes.

For excessive flow and surge conditions, consult factory before specifying.

.40

.40

.80

.85

.65

Mento Hoses and Couplings Catalogue

6

9-6. Quick Couplings 75 Series -- Thread-to-Connect Couplings

H, IH & PH Series -- Couplings for Hydraulic, Use

75 Series - Thread-to-Connect Couplings

Featuring...Snap-tite quality with superior pressure and flow characteristics Pneumatic and General Purpose over the competition.

Connect under Pressure — Designed for up

to 5,000 (345 bar) operating Featuring...Snap-tite quality with• built inpsireliability andpressures. flow characteristics over the competition.

Connect under Pressure — Designed for up to 5,000 psi (345 bar) operating pressures.

Thread-to-Connect — To connect, merely thread the nipple into the — coupler.

To Thread-to-Connect To connect, merely thread the nipple into the coupler. disconnect just unthread.

To disconnect just unthread.

Rugged — Steel construction, with zinc • yellow Rugged — Steel construction, with zinc yellow dichromate plating to resist corrosion. dichromate plating to resist corrosion.

Stainless steel steel construction also available.

Stainless construction also available.

Sizes — 1/8” 4” — Choice of sealof materials to handle ato –handle • Seals Seals — Choice seal materials a variety of fluids including applications variety of fluids including applications involving Series Quick involving the use hydraulic ofMetals fire-resistant hydraulic fluids.Disconnect Couplings the use of fire-resistant fluids.— H are available in2˝,1-1/2˝, four metals – steel, aluminum sizessizes — 3/4˝, 1-1/4˝, • Available Available —1˝, 3/4˝, 1˝, 1-1/2˝, 1-1/4˝, 2˝, 2-1/2˝, 3˝,brass, and 4˝.

3˝, and 4˝. andpressure 316 stainless • 2-1/2˝, Superior flow and low drop steel. A variety of protective finishes and low pressure drop available.

Please consultare factory.

• Superior Valvesflow close beforeare disconnection — Valves designed to shut off automatically under normal Valves close before disconnection — Valves conditions in both the coupler and nipple halves when the of unit is being disconnected.

Seal Versatility — Wide choice standard are designed to shut off automatically under normal conditions in bothand the coupler specialand sealnipple materials enable the H, IH & PH halves when the unit is being disconnected.

75 SERIES SNAP TITE 75 SERIES QUICK CONNECTORS series to handle a great variety ofNIPPLE fluids. NPT FEMALE CARBON STEEL DetCARBON Norske Veritas Certified SERIES COUPLING NPT FEMALE STEEL Part Body Thread Thread Body Material

•

Advantages of H Series

75

Sleeve Lock — Sleeve lock option in Number Size aidsSize Part Body Thread Thread Body Material accidental Number Size 75N12-12Fdisconnection 3/4"of the coupling.

3/4" NPT FEM The very rugged 75 Series isSize designed and constructed for high pressure hydraulicpreventing service. Although disconnect, align the pin in the body these couplings are used in a 3/4" broad variety of heavy duty applications, a primaryTo usage is in oil75N16-16F fields 75C12-12F 3/4" NPT FEM CARBON STEEL 1" with the 1" slot NPT FEM the sleeve 75N20-20F and retract sleeve. 1 1/4" and75C16-16F offshore drilling ... cranes,1"power tongs swivels, diving, etc.

1"andNPT FEM CARBON in STEEL 1 1/4" NPT FEM 75C20-20F 1 1/4" 1 1/4" NPT FEM CARBON (Valve STEEL & 75N24-24F 1 1/2" 1 1/2" NPT FEM Valve) Quick Disconnect 75C24-24F 1 1/2" 1 1/2" NPT FEM CARBON Low STEEL Pressure 75N32-32F 2" 2" NPT FEM body Drop — The two-piece RATINGS 75C32-32F 2" PRESSURE 2" NPT FEM CARBON construction STEEL 75N40-40F 1/2" than 2 1/2"the NPT FEM permits larger flow 2passages MAXIMUM WORKING* MINIMUM BURST AIR 75C40-40F 2 1/2" 2 1/2" NPT FEM CARBON designated STEEL 75N48-48F 3" 3" NPT FEM size of the coupling, permitting greater SIZE SPILLAGE (cc) INCLUSION (cc) PSI BAR PSI BAR 75C48-48F 3" 3" NPT FEM CARBON flow STEEL while maintaining 75N64-64F low pressure4"drop and 4" NPT FEM 75C64-64F 4" 12 4" 5,000 NPT FEM 345 CARBON STEEL 3/4˝ 8 20,000 provides 1379 end fitting versatility.

CARBON STEEL CARBON STEEL CARBON STEEL CARBON STEEL CARBON STEEL CARBON STEEL CARBON STEEL CARBON STEEL

75 SERIES NIPPLE NPT FEMALE STAINLESS STEEL

16 25NPT FEMALE 5,000Stream” 345 20,000 1379 Smooth — Snap-tite’s “Jet valve design helps maintain a clean linear flow. Positive positioning Thread 751˝SERIESFlow COUPLING STAINLESS STEEL Part Body Thread Body Material the valve aids maintaining even 345 flow under normal working conditions.

Number Size Size 31 in 48 5,000Thread 15,000 1035 Partof1-1/4˝ Body Thread a steady, Body Material Number Size 98 Size 5,000 3/4" 3/4" NPT FEM STAINLESS STEEL 1-1/2˝ on Connection 64 345 15,000 1035openS75N12-12F Flow — Valves are designed to automatically in both the coupler and nipple halves S75C12-12F 3/4" 3/4" NPT FEM STAINLESS STEEL S75N16-16F 1" 1" NPT FEM STAINLESS STEEL when 2˝ the unit 141is connected 205 permitting 5,000 maximum 345 free flow.

15,000 1035 S75C16-16F 1" 1" NPT FEM STAINLESS STEEL S75N20-20F 1 1/4" 1 1/4" NPT FEM STAINLESS STEEL 2-1/2˝ 204 Disconnection 207are 6,000 to 414 Shut-off On —FEM Valves designed automatically close under normal S75C20-20F 1 1/4" 3681 1/4" 3,000 NPT STAINLESS STEEL S75N24-24F 1 1/2"usage 1conditions 1/2" NPT FEM STAINLESS STEEL in both the coupler and 480 nipple when is disconnected.

S75C24-24F 1 1/2"halves NPT FEMthe STAINLESS S75N32-32F 2" 2" NPT FEM STAINLESS STEEL 3˝ 320 1 1/2" 3,000 207unit 6,000 STEEL 414 S75C32-32F 2" 610 2" — NPT FEM STAINLESS STEEL69 S75N40-40F 2 1/2" STAINLESS STEEL Fast Operation To connect, pull back2 1/2" the sleeve, insert NPT the FEM 4˝ Efficient 400 400 Connect28or disconnect 1,000 in seconds.

S75C40-40F 2 1/2" and2 release 1/2" NPTsleeve.

FEM To STAINLESS STEEL S75N48-48F 3" 3" NPT FEM STAINLESS STEEL nipple into disconnect, Burst pressures listed werethe taken atcoupler the point at which failure rendered thethe quick-disconnect inoperative.

(Proof pressure equalspull back the sleeve, remove the nipple and the halves 1-1/2 times the operating pressure.)

S75C48-48F 3" 3" NPT FEM STAINLESS STEEL S75N64-64F 4" 4" NPT FEM STAINLESS STEEL are Pressure disconnected.

NOTE: Ratings were established under static pressure conditions.

For impulse applications, multiply the above .6 for approximate S75C64-64F 4"pressure ratings by4" NPT pressure FEMratings. STAINLESS STEEL *NOTE: For working pressure of 316 SST units, multiply the above pressure ratings by .33 for approximate pressure ratings.

75 SERIES NIPPLE BSP FEMALE CARBON STEEL Dependable Operation — Ball-lock mechanism provides positive connection. Hardened stainless steel 75 along SERIES BSPinduction FEMALEhardened CARBON STEEL Part Body Body Material balls withCOUPLING a radiused and (steel) ball race gives extended life to the H Series Thread couplings. Thread Number Size Size Part Body Thread Thread Body Material Positive Sealing — Two types of seals are available75N12-12RP with H Series quick disconnects.

Number Size Connected Size 3/4" 3/4" BSP FEM CARBON STEEL 75C12-12RP 3/4" Seal –3/4" BSPfor FEM STEEL over several Molded U-Packer Standard all sizes; CARBON provides contact times the normal1"O-ring sealing 75N16-16RP 1" BSP FEM CARBON STEEL area. The unique 1" U-packer 1" seal design embodiesCARBON a self-energizing that permits a positive all BSP FEM 75C16-16RP BSP FEM STEEL feature 75N20-20RP 1 1/4" seal at 1 1/4" CARBON STEEL pressures. The1 design enables theFEM coupling to seal under adverse conditions such as side1 1/2" load, scratches 75C20-20RP 1/4" also 1 1/4" BSP CARBON STEEL 75N24-24RP 1 1/2" onBSP FEM CARBON STEEL the nipple from usage abuse the nipple.

75C24-24RP 1 1/2" 1 1/2"or dirt BSPon FEM CARBON STEEL 75N32-32RP 2" 2" BSP FEM CARBON STEEL 75C32-32RP 2" – Can be 2" supplied BSP FEM CARBON 75N40-40RP 1/2" 2steel 1/2" BSP FEM CARBON STEEL Optional Seal (-9) as standard in placeSTEEL of the U-Packer seal in steel and2 stainless 75C40-40RP 2 1/2" 2 1/2" BSP FEM STEEL 75N48-48RP 3" CARBON STEEL construction in sizes 1/4” thru 1-1/4”.

DesignedCARBON for use with high pressure, multiple-cycle hydraulic or 3" BSP FEM 75C48-48RP 3" FEM of aCARBON STEEL and a75N64-64RP 4" seal 4" BSP FEM CARBON STEEL pneumatic applications, the3"sealBSP set consists standard O-ring Teflon back-up ring. This 75C64-64RP 4" 4" from BSP extruding FEM CARBON STEEL configuration prevents the seal under multiple-cycle high flow and pressure surge applications.

75 SERIES NIPPLE BSP FEMALE STAINLESS STEEL

Positive Disconnected — The metal to metal contactPart of the valve with the coupler or nipple Thread 75 SERIESSealing COUPLING BSP FEMALE STAINLESS STEEL Body Thread Size Size to control compression of the valve Body seal eliminating and increasing seal life.

Partbody is designed Body Thread Thread Material wearNumber Number Size Size S75N12-12RP 3/4" 3/4" BSP FEM S75C12-12RP 3/4" 3/4" BSP FEM STAINLESS STEEL S75N16-16RP 1" 1" BSP FEM S75C16-16RP 1" 1" BSP FEM STAINLESS STEEL S75N20-20RP 1 1/4" 1 1/4" BSP FEM 2 S75C20-20RP 1 1/4" 1 1/4" BSP FEM STAINLESS STEEL S75N24-24RP 1 1/2" 1 1/2" BSP FEM S75C24-24RP 1 1/2" 1 1/2" BSP FEM STAINLESS STEEL S75N32-32RP 2" 2" BSP FEM S75C32-32RP 2" 2" BSP FEM STAINLESS STEEL S75N40-40RP 2 1/2" 2 1/2" BSP FEM S75C40-40RP 2 1/2" 2 1/2" BSP FEM STAINLESS STEEL S75N48-48RP 3" 3" BSP FEM S75C48-48RP 3" 3" BSP FEM STAINLESS STEEL S75N64-64RP 4" 4" BSP FEM S75C64-64RP 4" 4" BSP FEM STAINLESS STEEL

PRESSURE RATINGS

Size Spillage Air Inclusion Maximum Working* Minimum Burst (cc) (cc) PSI Bar PSI Bar 3/4" 8 12 5,000 345 20,000 1379 1˝ 16 25 5,000 345 20,000 1379 1-1/4" 31 48 5,000 345 15,000 1035 1-1/2˝ 64 98 5,000 345 15,000 1035 2" 141 205 5,000 345 15,000 1035 2-1/2˝ 204 368 3,000 207 6,000 414 3" 320 480 3,000 207 6,000 414 4" 400 610 400 28 1,000 69 Burst pressures listed were taken at the point at which failure rendered the quick-disconnect inoperative. (Proof pressure equals 1-1/2 times the operating pressure.) NOTE: Pressure Ratings were established under static pressure conditions. For impulse applications, multiply the above pressure ratings by .6 for approximate pressure ratings. *NOTE: For working pressure of 316 SST units, multiply the above pressure ratings by .33 for approximate pressure ratings.

DUST PLUGS AND CAPS* Size Dust Plug Dust Cap 3/4" 75MDP-12 75MDC-12 1" 75MDP-16 75MDC-16 1 1/4" 75MDP-20 75MDC-20 1 1/2" 75MDP-24 75MDC-24 2" 75MDP-32 75MDC-32 2 1/2" 75MDP-40 75MDC-40 3" 75MDP-48 75MDC-48 4" 75MDP-64 75MDC-64 *MATERIAL: CARBON STEEL

Body Material

STAINLESS STEEL STAINLESS STEEL STAINLESS STEEL STAINLESS STEEL STAINLESS STEEL STAINLESS STEEL STAINLESS STEEL STAINLESS STEEL

SPARE PARTS KITS Size Dust Plug Dust Cap 3/4" 75C12-SPK 75N12-SPK 1" 75C16-SPK 75N16-SPK 1 1/4" 75C20-SPK 75N20-SPK 1 1/2" 75C24-SPK 75N24-SPK 2" 75C32-SPK 75N32-SPK 2 1/2" 75C40-SPK 75N40-SPK 3" 75C48-SPK 75N48-SPK 4" 75C64-SPK 75N64-SPK EACH KIT CONTAINS A VALVE ASSEMBLY, SPRING AND GUIDE STOP

Mento Hoses and Couplings Catalogue

7

9-7. Quick Couplings H, IH & PH Series -- Couplings for Hydraulic, Pneumatic and General Purpose Use

71 Series - Flush Face/Dry Break Couplings

71 Series -- Flush Face/Dry Break Couplings

Featuring...Snap-tite quality with built in reliability and flow characteristics over the competition.

Featuring...Snap-tite quality with superior pressure and flow characteristics over the competition.

Flush Face/Dry Break — Air inclusion and fluid loss are held to a minimum to prevent

spillage and contamination of systems.

• Flush Face/Dry Break — Air inclusion and fluid loss (690 bar) operating pressures.

Push-to-Connect — Ideal one-hand operation Advantages of H Series are a minimum totheprevent spillage and • Versatile — Available in steel with zinc yellow when held one halfto is mounted.

Simply insert nipple into the coupler and push-to-connect.

To contamination of systems. dichromate plating, 316 Stainless steel, as well as Sizes — 1/8” – 4” disconnect, retract the sleeve; and the coupling • Push-to-Connect — Ideal one-hand operation when other materials. Special seals for troublesome media halves disconnect.

Rugged — Heavy duty construction is ideally one half is mounted. Simply insert the nipple the Quickare available;Couplings consult factory for details.

Metals —into H Series Disconnect suited for high impulse applications. coupler and push-to-connect. Toare disconnect, retract sizes — 1/8˝, 1/4˝, 3/8˝, 1/2˝, 3/4˝, 1˝, 1-1/4˝, available in four metals •– Available steel, brass, aluminum Pressure Capability — Designed for up to 10,000 psi (690 bar) operating pressures. the sleeve; and the coupling halves 1-1/2˝, and 2˝. finishes anddisconnect.

316 stainless steel. A variety of protective Versatile — Available in steel with zinc yellow • Rugged — Heavy duty construction is ideally suited Superior flow and low pressure drop dichromate plating, 316 Stainless steel, as well are available.

Please consult•factory. as other materials. for high impulse applications.

• Sleeve lock — Designed to provide protection Special seals for troublesome media are available; • Pressure Capability — DesignedSeal for up Versatility to 10,000 psi — Wide against accidental disconnection. choice of standard consult factory for details.

Available sizes — 1/8˝, 1/4˝, 3/8˝, 1/2˝, and special seal materials enable the H, IH & PH 3/4˝, 1˝, 1-1/4˝, 1-1/2˝, and 2˝.

71 SERIES NIPPLE NPT FEMALE CARBON STEEL SNAP TITE 71 SERIES QUICK CONNECTORS Superior flow and low pressure drop series to handle a great variety of fluids.

The 71 Series couplings are designed for today’s 71 SERIES COUPLING NPT CARBON **Det FEMALE Norske Veritas Certified forSTEEL North Part Body Thread Thread Body Material applications including special features for modern Sea applications.

Sleeve Lock — Sleeve lock option in needs - Part dry break, push-to-connect, highBody pressure, Thread Number Size aidsSize Thread Body Material Sleeve lock — Designed to provide protecrugged & versatile. Extra large flow chambers and preventing accidental tion against accidental disconnection.

Number Size Size 71-3N4-4Fdisconnection 1/4"of the coupling.

1/4" NPT FEM CARBON STEEL Snap-tite’s exclusive valve design permit exceptional Available with Autoclave cone To disconnect, align the pin in the3/8" body with3/8" the slot flow while maintaining low pressure drop.

71-3C4-4F 1/4" 1/4" NPT FEM CARBON STEEL 71-3N6-6F NPT FEM CARBON STEEL and threaded fittings — Consult factory the sleeve 71-3N8-8F and retract sleeve. 1/2" 71-3C6-6F 3/8" 3/8" NPT FEM CARBON in STEEL 1/2" NPT FEM CARBON STEEL PRESSURE RATINGS 71-3C8-8F 1/2" FEM HIGH PRESSURE STAINLESS CARBON STEEL & 71-3N12-12F 3/4" 3/4" NPT FEM CARBON STEEL STEEL 1/2" 316 STAINLESS NPT STEEL STEEL (Valve Valve) Quick Disconnect AIR SIZE SPILLAGE INCLUSION MAX. WORKING MIN. BURST* MAX.3/4" WORKING MIN. BURST* MIN. BURST* 3/4" NPT FEMMAX. WORKING CARBON STEEL Pressure 71-3N16-16F 1" 1" NPT FEM CARBON STEEL (INCHES) 71-3C12-12F (CC) (CC) — The two-piece body Low Drop PSI BAR PSI BAR PSI BAR PSI BAR PSI BAR PSI BAR 71-3C16-16F 1" 1" NPT FEMN/A CARBON STEEL 71-3N16-20F 1" than 1 1/4"the NPT FEM CARBON STEEL construction permits larger flow passages 1/8˝ .12 .02 10,000 689 22,000 1517 N/A N/A N/A 71-3C16-20F 1" 1 1/4"344 12,500 NPT 862 FEM10,000 689 CARBON STEEL 71-3N32-24F 2" 1greater 1/2" NPT FEM CARBON STEEL of the coupling, permitting 1/4˝ .02 .01 10,000 689 20,000 1379 5,000 20,000 1379 designated size 1 1/2"344 12,500 NPT 862 FEM10,000 689 CARBON STEEL while maintaining 71-3N32-32Flow pressure2"drop and 2" NPT FEM CARBON STEEL .02 .02 10,000 689 20,0002" 1379 5,000 20,000 1379 flow 3/8˝ x 1/4˝71-3C32-24F NPT 862 FEM10,000 689 CARBON STEEL end fitting versatility.

3/8˝ 71-3C32-32F .02 .02 10,000 689 20,0002" 1379 5,000 2" 344 12,500 20,000 1379 provides 1

3/8˝ x 1/2˝2

.02

1/2˝

.03

.02

10,000

689

20,000

1379

5,000

344

12,500

862

10,000

689

20,000

1379

71 SERIES NIPPLE NPT FEMALE STAINLESS STEEL

Smooth Flow — Snap-tite’s “Jet Stream” valve design helps maintainPart a clean linear flow. Positive positioning Thread 71 SERIES COUPLING NPT FEMALE STAINLESS STEEL Body Thread Body Material .03 10,000 689 20,000 1379 5,000 344 12,500 862 10,000 689 20,000 1379 of the.04valve aids in maintaining a steady, even flow under normal workingNumber conditions.

Size Size Body1034 Material 3/4˝ Part .06 7,500 517 Body 15,000 1034 Thread 5,000 344 12,500Thread 862 7,500 517 15,000 Number Size Size275 10,000 689 7,500 517 15,000 1034 S71-3N4-4F 1/4" 1/4" NPT FEM STAINLESS STEEL 1˝ .10 .06 7,500 517 15,000 1034 4,000 Flow on Connection — Valves are designed to automatically open in both the coupler and nipple halves 1/4" 1034 4,0001/4"275 10,000 NPT 689 FEM7,500 517 STAINLESS S71-3N6-6F 3/8" 3/8" NPT FEM STAINLESS STEEL .10 15,000 15,000 1034 STEEL 1˝ x 1-1/4˝S71-3C4-4F when.06the7,500 unit517is connected permitting maximum free flow.

3/8" 689 3,0003/8"206 6,000 NPT 413 FEM5,000 344 STAINLESS 5.25 30.50 5,000 344 10,000 10,000 689 STEEL 2˝ x 1-1/2˝S71-3C6-6F S71-3N8-8F 1/2" 1/2" NPT FEM STAINLESS STEEL 2˝ S71-3C8-8F 5.25 30.50 5,000 On 344 Disconnection 10,000 5,000 are 344 10,000 689 to Shut-off —413 Valves designed automatically close under normal 1/2" 689 3,0001/2"206 6,000 NPT FEM STAINLESS STEEL S71-3N12-12F 3/4"usage conditions 3/4" NPT FEM STAINLESS STEEL Unit is 3/8˝ with 1/4˝ end fitting. Unit is 3/8˝ with 1/2˝ end fitting, 1˝ unit with 1-1/4˝ end fitting, and 2˝ unit with 1-1/2˝ end fitting. in both the coupler3/4" and nipple halves when the unit is disconnected.

S71-3C12-12F NPT FEM STEEL S71-3N16-16F 1" 1" NPT FEM STAINLESS STEEL *NOTE: Pressure Ratings were established under static pressure conditions.

For high impulse 3/4" applications, multiply the above pressure ratings bySTAINLESS .6 for approximate pressure ratings.

S71-3C16-16F 1" pressure.

NPT FEM orSTAINLESS **For Det Norske Veritas (DNV) compliance, divide the burst pressure by1" 4 for the maximum working S71-3N16-20F 1" sleeve, 1 1/4" STAINLESS STEEL Fast Efficient Operation — Connect disconnect STEEL in seconds. To connect, pull back the insert NPT the FEM S71-3C16-20F 1" and1 release 1/4" the NPTsleeve.

FEM To STAINLESS 2" and1 the 1/2"halves NPT FEM STAINLESS STEEL nipple into the coupler disconnect, STEEL pull back theS71-3N32-24F sleeve, remove the nipple S71-3C32-24F 1 1/2" NPT FEM STAINLESS STEEL S71-3N32-32F 2" 2" NPT FEM STAINLESS STEEL are disconnected. 2" S71-3C32-32F 2" 2" NPT FEM STAINLESS STEEL 71 SERIES NIPPLE BSPsteel FEMALE CARBON STEEL Dependable Operation — Ball-lock mechanism provides positive connection.

Hardened stainless 71 along SERIES BSPinduction FEMALEhardened CARBON STEEL Part Body Body Material balls withCOUPLING a radiused and (steel) ball race gives extended life to the H Series Thread couplings. Thread Number Size Size Part Body Thread Thread Body Material Positive Sealing Connected — Two types of seals are available with H Series quick disconnects.

Number Size Size 71-3N4-4RP 1/4" 1/4" BSP FEM CARBON STEEL 71-3C6-4RP 1/4" Seal –1/4" BSPfor FEM STEEL over several Molded U-Packer Standard all sizes; CARBON provides contact times the normal sealingBSP FEM 71-3N6-6RP 3/8"O-ring 3/8" CARBON STEEL area. The unique U-packer seal design embodiesCARBON a self-energizing that permits a positive all BSP FEM 71-3C6-6RP 3/8" 3/8" BSP FEM STEEL feature 71-3N8-8RP 1/2" seal at1/2" CARBON STEEL pressures. The design enables theFEM coupling to seal under adverse conditions such as side 3/4" load, scratches 71-3C8-8RP 1/2" also1/2" BSP CARBON STEEL 71-3N12-12RP 3/4" onBSP FEM CARBON STEEL the nipple from3/4" usage abuse the nipple.

71-3C12-12RP 3/4"or dirt BSPon FEM CARBON STEEL 71-3N16-16RP 1" 1" BSP FEM CARBON STEEL 71-3C16-16RP 1" – Can be 1" supplied BSP FEM CARBON 71-3N16-20RP 1" 1steel 1/4" BSP FEM CARBON STEEL Optional Seal (-9) as standard in placeSTEEL of the U-Packer seal in steel and stainless 71-3C16-20RP 1" 1/4” 1 1/4" BSP FEM STEEL 71-3N32-24RP 2" 1or1/2" BSP FEM CARBON STEEL construction in sizes thru 1-1/4”.

DesignedCARBON for use with high pressure, multiple-cycle hydraulic 71-3C32-24RP 2" 1the 1/2"sealBSP FEM of aCARBON STEEL and a71-3N32-32RP 2" seal 2" BSP FEM CARBON STEEL pneumatic applications, set consists standard O-ring Teflon back-up ring. This 71-3C32-32RP 2" 2" from BSP extruding FEM CARBON STEEL configuration prevents the seal under multiple-cycle high flow and pressure surge applications.

3

4

1

2

3

4

71 SERIES NIPPLE BSP FEMALE STAINLESS STEEL

Positive Disconnected — The metal to metal contactPart of the valve with the coupler or nipple Thread 71 SERIESSealing COUPLING BSP FEMALE STAINLESS STEEL Body Thread Size Size to control compression of the valve Body seal eliminating and increasing seal life.

Partbody is designed Body Thread Thread Material wearNumber Number Size Size S71-3N4-4RP 1/4" 1/4" BSP FEM S71-3C4-4RP 1/4" 1/4" BSP FEM STAINLESS STEEL S71-3N6-6RP 3/8" 3/8" BSP FEM S71-3C6-6RP 3/8" 3/8" BSP FEM STAINLESS STEEL S71-3N8-8RP 1/2" 1/2" BSP FEM 2 S71-3C8-8RP 1/2" 1/2" BSP FEM STAINLESS STEEL S71-3N12-12RP 3/4" 3/4" BSP FEM S71-3C12-12RP 3/4" 3/4" BSP FEM STAINLESS STEEL S71-3N16-16RP 1" 1" BSP FEM S71-3C16-16RP 1" 1" BSP FEM STAINLESS STEEL S71-3N16-20RP 1" 1 1/4" BSP FEM S71-3C16-20RP 1" 1 1/4" BSP FEM STAINLESS STEEL S71-3N32-24RP 2" 1 1/2" BSP FEM S71-3C32-24RP 2" 1 1/2" BSP FEM STAINLESS STEEL S71-3N32-32RP 2" 2" BSP FEM S71-3C32-32RP 2" 2" BSP FEM STAINLESS STEEL Size (Inc)

PRESSURE RATINGS

Spillage Air Steel 316 Stainless Steel High Pressure (cc) Inclusion Stainless Steel (cc) Max. Working Min. Burst* Max. Working Min. Burst* Max. Working Min. Burst* PSI Bar PSI Bar PSI Bar PSI Bar PSI Bar PSI Bar 1/8" .12 .02 10,000 689 22,000 1517 N/A N/A N/A N/A 1/4˝ .02 .01 10,000 689 20,000 1379 5,000 344 12,500 862 10,000 689 20,000 1379 1 3/8" x 1/4" .02 .02 10,000 689 20,000 1379 5,000 344 12,500 862 10,000 689 20,000 1379 3/8" .02 .02 10,000 689 20,000 1379 5,000 344 12,500 862 10,000 689 20,000 1379 2 .02 10,000 689 20,000 1379 5,000 344 12,500 862 10,000 689 20,000 1379 3/8" x 1/2" .02 1/2˝ .03 .03 10,000 689 20,000 1379 5,000 344 12,500 862 10,000 689 20,000 1379 3/4" .06 .04 7,500 517 15,000 1034 5,000 344 12,500 862 7,500 517 15,000 1034 1" .10 .06 7,500 517 15,000 1034 4,000 275 10,000 689 7,500 517 15,000 1034 .06 7,500 517 15,000 1034 4,000 275 10,000 689 7,500 517 15,000 1034 1" x 1-1/4"3 .10 30.50 5,000 344 10,000 689 3,000 206 6,000 413 5,000 344 10,000 689 2" x 1-1/2"4 5.25 2" 5.25 30.50 5,000 344 10,000 689 3,000 206 6,000 413 5,000 344 10,000 689 1 Unit is 3/8˝ with 1/4˝ end fitting. 2Unit is 3/8˝ with 1/2˝ end fitting, 31˝ unit with 1-1/4˝ end fitting, and 42˝ unit with 1-1/2˝ end fitting. *NOTE: Pressure Ratings were established under static pressure conditions. For high impulse applications, multiply the above pressure ratings by .6 for approximate pressure ratings.

Body Material

STAINLESS STEEL STAINLESS STEEL STAINLESS STEEL STAINLESS STEEL STAINLESS STEEL STAINLESS STEEL STAINLESS STEEL STAINLESS STEEL

Size Dust Plug Dust Cap 1/4˝ 71-3PCC-4 71-3PNC-4 3/8" 71-3PCC-6 71-3PNC-6 1/2" 71-3PCC-8 71-3PNC-8 3/4" 71-3PCC-12 71-3PNC-12 1" 71-3PCC-16 71-3PNC-16 Material: Plastic

Mento Hoses and Couplings Catalogue

9-8. Quick Couplings

Tema T-Series Body Size 1/8" up to 2" Technical Description The TEMA Standard Series is characterised by a low pressure drop and maximum flow capacity. The coupling system is available as double shut-off or straight through version.

The 2500 can be used also as a single shut-off version.

Material Coupling

Advantages • High operating pressure • Compact dimension • Due to the Pressure Eliminator version for coupling and plug the connection is possible up to the operating pressure.

• Double safety through a double O-ring seal.

• A safety closing ring prevents unintentional uncoupling.

Standard / Pressure Eliminator

Coupling Body Sleeve Locking Ring

Brass, nickel plated chromated Steel hardened, zinc plated, passiv., sealed Brass, zinc-iron coated, black passiv., sealed Valve Brass Springs AISI 301 Locking Balls AISI 420 C Seals NBR/FKM Valve Holder (up to 100°C) Zinc casting Valve Holder (over 100°C) Brass Plug

Plug Body Valve Springs Seals Valve Holder (up to 100°C) Valve Holder (over 100°C)

Standard / Pressure Eliminator

Steel hardened, zinc plated, passiv., sealed Brass AISI 301 NBR/FKM Zinc Casting Brass

Stainl. Steel / Press. Eli.

AISI 316 AISI 316 AISI 316

AISI 316 AISI 301 AISI 420 C FKM AISI 316 AISI 316

TEMA QUICK CONNECTORS

Part Number

Body Size

Thread Size

2510 2510 RV

1/4" 1/4"

1/4" 1/4"

2520 2520 RV

1/4" 1/4"

1/4" 1/4"

3810 3810RV

3/8" 3/8"

3/8" 3/8"

3820 3820RV

3/8" 3/8"

3/8" 3/8"

5010 5010RV

1/2" 1/2"

1/2" 1/2"

5020 5020RV

1/2" 1/2"

1/2" 1/2"

7510 7510RV

3/4" 3/4"

3/4" 3/4"

7520 7520RV

3/4" 3/4"

3/4" 3/4"

10010 10010RV

1" 1"

1" 1"

10020 10020RV

1" 1"

1" 1"

Thread

Available Valves

High Press. Water (3/8")

Brass, chromated Brass, chromated

AISI 301 AISI 420 C NBR

Stainl. Steel / Press. Eli.

AISI 316 AISI 316 AISI 301 FKM AISI 316 AISI 316

Working Temperature -30°C up to +100°C (NBR) -25°C up to +200°C (FKM) depending on the medium.

Special seals are available on request.

High Press. Water (3/8")

AISI 420 hardened

Body Material

Working Pressure

BSP FEM BSP FEM

BRASS NICKEL PL STAINLESS STEEL

450 Bar 250 Bar

BSP FEM BSP FEM

STEEL STAINLESS STEEL

450 Bar 250 Bar

BSP FEM BSP FEM

BRASS NICKEL PL STAINLESS STEEL

350 Bar 300 Bar

BSP FEM BSP FEM

STEEL STAINLESS STEEL

350 Bar 300 Bar

BSP FEM BSP FEM

BRASS NICKEL PL STAINLESS STEEL

300 Bar 300 Bar

BSP FEM BSP FEM

STEEL STAINLESS STEEL

300 Bar 300 Bar

BSP FEM BSP FEM

BRASS NICKEL PL STAINLESS STEEL

280 Bar 250 Bar

BSP FEM BSP FEM

STEEL STAINLESS STEEL

280 Bar 250 Bar

BSP FEM BSP FEM

BRASS NICKEL PL STAINLESS STEEL

250 Bar 250 Bar

BSP FEM BSP FEM

STEEL STAINLESS STEEL

250 Bar 250 Bar

1/4" COUPLING 1/4" NIPPLE

3/8" COUPLING 3/8" NIPPLE

1/2" COUPLING 1/2" NIPPLE

3/4" COUPLING 3/4" NIPPLE

1" COUPLING 1" NIPPLE

8

Mento Hoses and Couplings Catalogue

9-9. Quick Couplings Body Size

MA

Tema 1/4"HP1500 Series

HP1500-Series

Body Size

TEMA Tema Profile

1/4"

1500 bar

HP1500-Series Technical Description Advantages The Tema high pressure cou t )JHI nPX BT B SFTVMU PG

Technical Description Advantages Technical Description Advantages PQUJNJTFE WBMWF EFTJHO Working Pressure TheQMJOH XBT TQFDJBMMZ EFWFMPQFE Tema high coupling • High flow as of optimised The Tema highpressure pressure cou t )JHI nPX BT B SFTVMU PG result CBS use in developed bolt tensioning t "EEJUJPOBM QMVH TFBMJOH WJB QMJOH XBT TQFDJBMMZ EFWFMPQFE wasfor specially for use PQUJNJTFE WBMWF EFTJHO valve design. for use in bolt tensioning t "EEJUJPOBM QMVH TFBMJOH WJB Working Temperature equipment.

This series isThis QPMZNFS WBMWF DBTJOH UP HVB in bolt tensioning equipment. • Additional plug ¥$ VQ UP ¥$ /#3

sealing via equipment.

This series is QPMZNFS WBMWF DBTJOH UP HVB produced in steel.

The plug SBOUFF IJHI SFMJBCJMJUZ TFBMT SBOUFF IJHI SFMJBCJMJUZ TFBMT produced in steel.

The plug

depending on the medium. seriesCPEJFT BOE UIF TMFFWFT BSF is produced in steel. The plug polymer valve casing, to FWFO XJUI TFDPOE IBOE QMVHT 4QFDJBM TFBMT BSF BWBJMBCMF FWFO XJUI TFDPOE IBOE QMVHT CPEJFT BOE UIF TMFFWFT BSF CMBDL HBMWBOJTFE 5IF DPV request (seeseals page 6). bodies and the sleeves are blackt 5FNB IJHI QSFTTVSF DPVQMJOHT guarantee highonreliability CMBDL HBMWBOJTFE 5IF DPV t dust 5FNB IJHI QSFTTVSF DPVQMJOHT pling can be supplied either are supplied with caps galvanised.

The coupling can be JODMVTJWF even with second-hand plugs. with orcan without additional pling be supplied either are supplied with dust caps TBGFUZ MPDL Available Valves supplied either with additional or without ad• Tema high pressure couplings are with or without JODMVTJWF Seals .FUBM TFBMJOH DPOF UISFBEFE ditional safety lock. supplied with dust caps inclusive!

TBGFUZ MPDL adapters/metal sealing cone Seals adapters.

Seals .FUBM TFBMJOH DPOF UISFBEFE Metal sealing conesealing threaded adaptadapters/metal cone ers/metal sealing cone adapters. adapters.

High Pressure

1500 bar

ofile

1500 bar

INTERCHANGEABLE WITH CEJNMaterial 116 Coupling Coupling Body Material Coupling

Coupling Body Applications Area

Sleeve

Valve Springs ations Area Locking Balls Seals Inner Sleeve Plug

Part Number Body Size

Steel, zinc-nickel coated, black passivated, sealed

Sleeve

Steel, hardened, zinc-iron coated, black passivated, sealed

Valve

Steel, zinc plated, passivated, sealed

Standard

Inner Sleeve

POM Standard Steel, hardened, zinc-iron coated, black passivated, sealed Steel, zinc plated, passivated, sealed AISI 302

Seals

NBR

Valve Retainer

Steel, zinc plated, passivated

Capacity with Oil with Viscosity of 32cSt at 40°C as per ISO 7241/2-2000

ow Rate in l/min

Thread Size Thread

THP1500 QUICK COUPLING

Body Material

Springs AISI 302 HP15105131 1/4" 1/4" NPT FEM STEEL Steel, zinc-nickel coated, black pasLocking Balls AISI 420 C Material Coupling Standard THP1500 NIPPLE sivated, sealed Seals NBR HP1520513 1/4" 1/4" NPT FEM STEEL Coupling Body coated,POM Steel, zinc-nickel coated, black passivated, sealed Inner Sleeve Steel, hardened, zinc-iron Plug Standard black passivated, sealed Sleeve Steel, hardened, zinc-iron coated, black passivated, sealed Plug Body Steel, hardened, zinc-iron coated, black passivated, sealed Steel, zinc plated, passivated, sealed Valve Steel, zinc plated, passivated, sealed Valve Steel, zinc plated, passivated, sealed AISI 302 Springs AISI 302 Springs AISI 302 Size Dust Plug Dust Cap AISI 420 C Seals NBR HP 26 HP 16 Locking Balls AISI 420 C1/4Ë?

NBR Valve Retainer Steel, zinc plated, passivated Material: Plastic POM Seals NBR

Flow Rate in l/min

110

Available Valves Available Valves

TEMA 1500BAR QUICK CONNECTOR

Standard

Steel, hardened, zinc-iron coated, Plug sealed black passivated, Flow Capacity with Oil withSteel, Viscosityzinc of 32cSt at 40°C as per ISO 7241/2-2000 Valve plated, passivated, sealed Plug Body Springs AISI 302 Valve Seals NBR Springs passivated Valve Retainer Steel, zinc plated, Pressure Drop (bar)

Plug Body

Standard

Working Pressure CBS Working Pressure 1500 bar Working Temperature Working Temperature ÂĄ$ VQ UP ÂĄ$ /#3

-30°C up to +100°C depending on the(NBR) medium.

4QFDJBM TFBMT BSF BWBJMBCMF depending on the medium. on request page 6).

Special seals(see are available on request.

9

Mento Hoses and Couplings Catalogue

FasterSeries VVS Series

VVS ▲

er pressure

dard

and peaks

Features

• • • • • •

Connection system: screw-on Disconnection system: screw-on Shut-off system: poppet valve Connectability: both male and female couplings under pressure Disconnection under pressure: allowed Interchangeability: according to Faster internal standard

• • • • •

Purposely dimensioned to stand very high pressures and peaks Screw-on latching system Reinforced guidevalve with mechanical backstop Also available in Brass and Stainless Steel Interchangeable with VV series couplings

F).

ase ogether

F).

F).

10

9-10. Quick Couplings

STEEL

STEEL Series Pressure drop graph: Test bench to ISO 7241-2 specifications with oil viscosity 20 cSt (3°E), temperature 50°C (122°F).

Materials: - Female in steel - Male in steel - Steel hardened valve - Surface treatment: zinc plating with Cr III passivation - Springs in C98 steel Seals: Standard in oilproof NBR (Nitrile Rubber). On request: Viton, Neoprene, EPDM or other seals.

Antiextrusion rings: In pure PTFE. Working temperatures: With standard seals in NBR (Nitrile Rubber) from -25°C (-13°F) to +125°C (+257°F).

For temperature exceeding these values, the quick-release coupling will be supplied with all components in steel together with the appropriate seals.

V

Pressure drop graph: Test bench to ISO 7241-2 specifications with oil viscosity 20 cSt (3°E), temperature 50°C (122°F).

Materials: - Female in steel ALSO AVAILABLE IN STAINLESS STEEL - Male in steel Accessories and spare part kit - Steel hardened valve FASTER VVS SERIES QUICK CONNECTORS - Surface treatment: zinc plating with Cr III passivation See at pages 26-27 - Springs in C98 steel VVS SERIES COUPLING NPT FEMALE CARBON VVS SERIES COUPLING BSP FEMALE CARBON STEEL Seals: Standard STEEL in oilproof NBR (Nitrile Rubber).

On request:Body Viton, Neoprene, Part Body Thread Thread MaterialEPDM or other seals.

Body Thread Thread Body Material Antiextrusion rings: In pure PTFE. Part Accessories and spare Working temperatures: Number Size Size Number Size Size With standard seals in NBR (Nitrile Rubber) See at pages 26-27 from -25°C (-13°F) to +125°C VVS14GASF 1/4" 1/4" BSP FEM STEEL VVS14NPTF 1/4" 1/4" NPT FEM STEEL(+257°F).

For temperature exceeding these values, the quick-release VVS38GASF 3/8" 3/8" BSP FEM STEEL VVS38NPTF 3/8" 3/8" NPT FEM STEEL coupling will be supplied with all components in steel together with the appropriate seals.

VVS12GASF 1/2" 1/2" BSP FEM STEEL VVS12NPTF 1/2" 1/2" NPT FEM STEEL

VVS34NPTF VVS1NPTF VVS114NPTF VVS112NPTF VVS2NPTF

3/4" 1" 1 1/4" 1 1/2" 2"

3/4" 1" 2 1/4" 2 1/2" 2"

VVS34GASF 3/4" NPT FEM STEEL VVS1GASF 1" NPT FEM STEEL STAINLESS STEEL VVS114GASF 1 1/4" NPT FEM Pressure drop graph:STEEL Test bench to ISO 7241-2 specifications VVS112GASF 1 1/2" NPT FEM STEEL with oil viscosity 20 cSt (3°E), temperature 50°C (122°F).

Materials: VVS2GASF 2" NPT FEM STEEL - Male and female in AISI 316

3/4" 1" 2 1/4" 2 1/2" 2"

BSP FEM BSP FEM BSP FEM BSP FEM BSP FEM

pa

STEEL STEEL STEEL STEEL STEEL

- Springs, valves and valve guides in AISI 316 VVS SERIES NIPPLE NPT FEMALE CARBON STEEL VVS SERIES NIPPLE NPT FEMALE CARBON STEEL Seals: Standard inBody NBR (Nitrile Rubber), Shore hardness 85.

Part Body Thread Thread Body Material Part Body Thread Thread Material On request: Viton, Neoprene, EPDM seals.

Antiextrusion rings: Number Size Size Number Size Size In pure PTFE. VVS14GASM 1/4" 1/4" BSP FEM STEEL VVS14NPTM 1/4" 1/4" NPT FEM STEEL Working temperatures: With standard seals inSTEEL NBR (Nitrile Rubber) VVS38GASM 3/8" 3/8" BSP FEM STEEL VVS38NPTM 3/8" 3/8" NPT FEM from -25°C (-13°F) to +125°C (+257°F).

VVS12GASM 1/2" 1/2" BSP FEM STEEL VVS12NPTM 1/2" 1/2" NPT FEM STEEL VVS34GASM 3/4" 3/4" BSP FEM STEEL VVS34NPTM 3/4" 3/4" NPT FEM STEEL BRASS VVS1GASM 1" 1" BSP FEM STEEL VVS1NPTM 1" 1" NPT FEM STEEL Pressure drop graph:STEEL VVS114GASM 1 1/4" 2 1/4" BSP FEM STEEL VVS114NPTM 1 1/4" 2 1/4" NPT FEM Test bench to ISO 7241-2 specifications VVS112GASM with oil viscosity 20 cStSTEEL (3°E), temperature 50°C (122°F). 1 1/2" 2 1/2" BSP FEM STEEL VVS112NPTM 1 1/2" 2 1/2" NPT FEM Materials: VVS2GASM 2" 2" BSP FEM STEEL VVS2NPTM 2" 2" NPT FEM - Male, female, valves STEEL and valve guides in brass

DN Nominal diameter The descriptions and illustrations in this catalogue are for information only and are not binding. mm inc 1/4” 04 4,5 0.18 3/8” 06 5,5 0.22 1/2” 08 9,8 0.38 3/4” 12 10,5 0.41 1” 16 13,7 0.54 1 1/4” 20 22,8 0.9 1 1/2” 24 24,7 0.97 2” 32 264 43,9 Size

- Springs in AISI 316 Seals: STAINLESS Standard in NBR (Nitrile Rubber), Shore hardnessSTEEL 85. & BRASS MATERIAL AVAILABLE UPON REQUEST On request: Viton, Neoprene, EPDM seals.

Antiextrusion rings: In pure PTFE. Working temperatures: TECHNICAL DATA With standard seals in NBR (Nitrile Rubber) Max work.(+257°F).

Medium burst pressure Fluid from -25°C (-13°F) to +125°C

Rated flow l/min.

8 18 10 30 45 90 140 300 1.73

GPM 2,1 4,8 7,9 12 24 37 79 1000

pressure * MPa PSI 80 11600 76 11020 73 10585 70 10150 53 7685 60 8700 40 5800 35 5075

Connected MPa PSI 250 36250 230 33350 220 31900 214 31030 194 28130 200 29000 150 21750 105 15225

Male Female spillage MPa PSI MPa PSI cc. max.

240 34800 240 34800 1 290 42050 250 36250 1,5 The descriptions and illustrations in this catalogue are for 238 34510 220 31900 2information only and are not bin 212 30740 230 33350 3 160 23200 224 32480 10 180 26100 180 26100 15 120 17400 150 21750 38 130 18850 130 18850 46

Couplings

Size

tion A

mm

mm

1/4"

1/4"

1/4" 3/8"

mm

22 mm

60,5

28,5

Ball

1/4"

22 mm

60,5

29

Poppet

3/8"

24 mm

72

35

Ball

Mento Hoses and Couplings Catalogue

9-11. Quick Couplings

3/8" 3/8" 1" 73 35 Body ConnecHex L D Size tion A mm mm

Parker 3000 Series Male NPTF Thread

gr.

11

Poppet Valving

D1 mm

115

3050-2

121

3050-2

220

30003050-3

225 3050-3 Weight Pa gr.

1/4"

1/4"

22 mm

60,5

28,5

Ball

115

305

1/4"

1/4"

22 mm

60,5

29

Poppet

121

305

Technical Description High pressure coupler up to 700 bar. Screw locking mechanism.

Advantages 24 mm 72 35mechanical and hydraulic Ball Screw3/8" type locking3/8" mechanism - high resistance to strenghs.

3/8" 3/8" 1" 73 35 Poppet Ball or poppet valving configurations can be connected together with reduced impact Couplings on the flow capacities.

Plugs

Male NPTF Thread

Body ConnecHex L D Advantages Size tion A mm mm mm • Portable hydraulic rams • Hydraulic jacks, rams and clamping devices 1/4" 1/4" 19 32 28 • Clamping hand tools • Rescue equipment 1/4"

Plugs

Female NPTF Thread Material Coupling

Coupling Body Sleeve Valve Springs Seals 1/4" Seals 3/8" Thread Body

Standard

Steel Steel Steel Steel NBR Polyurethane Steel

Dust Protection

Female Material Plug Plug Body Valve Seals 1/4" Seals 3/8" Seals Valve Holder

NPTF Thread Standard

Working Pressure

Seal-Kit

27

32

31

Steel Steel NBR Polyurethane NBR Steel

Valving

15,8

Ball

15,8

Poppet

Body Size

19,0

mm

mm

mm

1/4"

1/4"

19

32

28

1/4"

1/4"

27 32 SERIES 31 QUICK CONNECTORS 15,8 PARKER 3000

3/8" 3/8" Body Size 1/4" 3/8"

3/8"

1/4"

38

35

19,0

1/4" 3/8"

3009-2 3009-3

1/4" 3/8"

DUST PLUG

1/4"

forSeal-Kit coupling

3/8"

for coupling

2

3/8"

3/8" 85

24 mm

3/8"

3/8"

70

3010-2

72 3010-2

3/8"

1/4" 3/8"

30003010-3 1"

115

3/8"

for plug Version for plug

m

60,5

1/4"

3005-2 3005-3

L mm

60,5

1/4"

Ball

tion A

22 mm

Poppet1/4"

Body Material

Part N Hex

22 mm

3000 SERIES COUPLING NPT MALE CARBON STEEL 3/8" 3050-2 BALL 35 1/4" 36,8 NPT MALE 3/8" 32 19,0 STEEL Poppet 3050-2P POPPET 1/4" NPT MALE STEEL 3050-3 BALL 3/8" NPT MALE STEEL Female NPTF Thread Version 3050-3P POPPET 3/8" NPT MALE STEEL 3000 SERIES NIPPLE NPT FEMALE CARBON STEEL Dust Protection 3010-2 BALL 1/4" NPT FEM STEEL 3010-2P POPPET 1/4" for coupling NPT FEM STEEL Body 3010-3 BALL 3/8" NPT FEM STEEL Size 3010-3P POPPET 3/8" for coupling NPT FEM STEEL DUST CAP

Body Max. Operating Pressure Connected 3/8" 700 bar Size 700 bar

32

Thread Size Thread

Weight Connecgr.

305

1/4"

Ball Body Size

15,8

225

1/4"

19,0 Male NPTF ThreadPoppet D1 Valving Plugsmm

tion A

Part Number Valve

1/4" 1/4"

Ball

Size

Dust Protection Body Size 1/4" 3/8"

1/4"

Working Temperature 3/8"up to +110°C 3/8"(NBR) 32 38 35 -30°C -30°C up to +80°C (Polyurethane) 3/8" on 3/8" 35 36,8 depending the medium.32 Body ConnecHex L Special seals are available on request (see page 6Dff).

D1 mm

220 305 3000-S

73

110 3010-3 Weight Pa gr.

Connection A

70Hex mm

L mm

1/4"

8519

32

1/4"

27

32

301m

301

115 301 3000-S

3/8"

32

38

3/8"

32

35

110

3

301

Part N

3005-2

3005-3

3000-

3009-2 Pa 3009-3

300 Body Size

300 3000-S

1/4"

1/4" Body Size3/8"

for plug Material for plug

3/8"

300 Part N 300

1/4"

NBR

JT02011

3/8"

Polyurethane

JT01U2

Seal-Kit

3000Body Size

Material

Pa

1/4"

NBR

JT0

3/8"

Polyurethane

JT0

Please consider our security advices on the pages 1

QR74 HIGH PRESSURE QUICK RELEASE COUPLING

Mento Hoses and Couplings Catalogue

MATED COUPLING

12

9-12. Quick Couplings

BOP QR 74 Series

NPT THR D

NPT THR D

High Pressure Quick Release Coupling Design Features: • Fire Rated by Lloyds Register of Shipping to 700°C • NPT Female connections • Completely serviceable, all components can be replaced Materials: (standard coupling) • Stainless Steel Grade 316L • Viton Seals Also available in Hex Nut style, other body and seal materialsdetails on request FEMALE COUPLING COUPLING SIZE

3/8 1/2 3/4 1 1.1/4 1.1/2 2

COMPLETE COUPLING PART NO.

QR74AC5-06 QR74AC5-08 QR74SAC5-12 QR74S1AC5-16 QR74S1AC5-20 QR74S1AC5-24 QR74S1AC5-32

COUPLING SIZE 3/8" 1/2" COUPLING NPT 3/4" A SIZE FEM THRD 3/8 3/8 3.334 1" 1/2 1/2 4.330 3/4 3/4 5.000 1 1/4" 1 1 6.000 1.1/4 1.1/4 6.614 1 1/2" 1.1/2 1.1/2 7.645 2 2 9.054 2"

FEMALE COUPLING PART NO.

MALE COUPLING MALE COUPLING PART NO.

MAX.OPERATING PRESSURE

MIN. BURST PRESSURE

26000 psi 1730 bar QR74 FIRE RATED 24000 psi 1600 bar 19500 psi 1300 barCOUPLING HIGH PRESSURE QUICK RELEASE 18000 psi 1200 bar FEMALE COUPLING PN MALE COUPLING PN MAX 15000 psi 1000 bar OPERATING PRESSURE 14000 psi 930 bar QR74AFBC5-06SS QR74AMBC5-06SS 345BAR 13500 psi 900 bar QR74AFBC5-08SS QR74AMBC5-08SS 345BAR Design Features: QR74SAFBC5-12SS QR74SAMBC5-12SS 345BAR B C D � Fire Rated by Lloyds Register of Shipping to 700°C � NPT Female connections 2.332 2.983 3.000 QR74S1AFBC5-16SS QR74SAMBC5-16SS 345BAR � Completely serviceable, all components can be replaced 2.790 3.386 4.250 3.111 3.898 4.750 Materials: (standard coupling) QR74S1AFBC5-20SS QR74SAMBC5-20SS 345BAR 3.269 4.694 4.750 � Stainless Steel Grade 316L 3.955 5.275 5.750 � VitonQR74SAMBC5-24SS Seals QR74S1AFBC5-24SS 345BAR 4.552 5.064 5.500 5.175 7.768 7.250 Also available in Hex Nut style, other body and seal materials QR74S1AFBC5-32SS detailsQR74SAMBC5-32SS 207BAR on request QR74AFBC5-06 QR74AFBC5-08 QR74SAFBC5-12 QR74S1AFBC5-16 QR74S1AFBC5-20 QR74S1AFBC5-24 QR74S1AFBC5-32

QR74AMBC5-06 QR74AMBC5-08 QR74SAMBC5-12 QR74SAMBC5-16 QR74SAMBC5-20 QR74SAMBC5-24 QR74SAMBC5-32

5000 psi 345 bar 5000 psi 345 bar 5000 psi 345 bar 5000 psi 345 bar 5000 psi 345 bar 5000 psi 345 bar 3000 psi 207 bar

COUPLING SIZE NPT FEM THRD A Head Office ContiTech Beattie Limited, Jubilee Industrial Estate, Ashington, Northumberland, NE63 8UB, England Tel: 01670-528700, , Web Site: www.contitechbeattie.co.uk 3/8"Fax: 01670-520535, E-mail: sales@contitechbeattie.co.uk 3/8" 3.334” 1/2" 1/2" 4.330” 3/4" 3/4" 5.000” 1" 1" 6.000” 1 1/4" 1 1/4" 6.614” 1 1/2" 1 1/2" 7.645” 2" 2" 9.054” COUPLING SIZE

3/8˝ 1/2˝ 3/4˝ 1˝ 1 1/4˝ 1 1/2˝ 2˝ Also available in AISI 316

DUST CAP & CHAIN PN QR74DC-06PC QR74DC-08PC QR74DC-12PC QR74DC-16PC QR74DC-20PC QR74DC-24PC QR74DC-32PC

B

MIN BURST PRESSURE 1730BAR 1600BAR 1300BAR 1200BAR 1000BAR 930BAR 900BAR

C 2.332” DSQR74-09 2.790” 3.111” 3.269” 3.955” 4.552” 5.175”

DUST PLUG & CHAIN PN QR74DP-06PC QR74DP-08PC QR74DP-12PC QR74DP-16PC QR74DP-20PC QR74DP-24PC QR74DP-32PC

D 2.983” 3.386” 3.898” 4.694” 5.275” 5.064” 7.768”

3.000” 4.250” 4.750” 4.750” 5.750” 5.500” 7.250” MATERIAL NYLATRON NYLATRON NYLATRON NYLATRON NYLATRON NYLATRON NYLATRON

Low Pressure

Nominal Diameter

Technical Description 1/4" industrial coupling according to ISO 6150 B and US MIL-SPEC 4109. Especially suitable for use with gaseous media in industry.

Coupling system with single-hand operation. UltraFlo valve for optimum flow and low pressure drop. Steel sleeve counters oscillating forces. The high insertion depth is guaranteed by an optimised plug guide.

Mento Hoses and Couplings Catalogue

13

9-13. Quick Couplings

5,5 Rectus 23 Series = 25 mm²

Dust Protectio for Coupling Pa

Working Temp -20°C up to +1 depending on t

* For temperatu +100°C and d other seal var available.

Technical Description Single 1/4" industrial coupling according to ISO 6150 B Shut-Off Dust Protections (P. 3 Technical Description and US MIL-SPEC 4109. Especially suitable for Working Pressure** Pressure** for Coupling Part.-No. SK23 use with gaseous media coupling in industry. according toWorking 1/4" industrial ISO 6150 B and 35bar bar 35 Rectus Series suitable Coupling with single-hand operation.

USsystem MIL-SPEC 4109.

Especially for use ** maximum staticwith working pres** maximum static working sure with safety factor 4 to 1. Working Temperature* UltraFlo valve for optimum flow and low gaseous media in industry. pressure drop. Steel sleeve counters oscillating pressure with safety factor 4 to 1.

KA

23

Coupling system with single-hand operation. UltraFlo

-20°C up to +100°C (NBR)

forces.valve The high depth is guaranteed Material Material depending on the medium. forinsertion optimum flow and low pressure drop. Steel by an optimised plug guide.

Coupling: Brass Brass / /Steel nickel Coupling: Steel nickel plated sleeve counters oscillating forces. The high insertion plated Plug: Steel nickel plated or Brass depth is guaranteed by an optimised plug guide.

Plug: Steel nickel plated or Brass * For temperatures below -2 Dust Protections (P. 319) Technical Description Dust Protections Seals: Seals: NBR NBR +100°C and depending on for Coupling Part.-No. SK23S 1/4" industrial coupling according to ISO 6150 B and for Coupling Part.-No. SK23S US MIL-SPEC 4109. Especially suitable for use with other seal variants (FKM, E Interchangeability Working Temperature* gaseous media in industry.

Working Temperature* • Industr.

Interchange 1/4" available.

-20°C up to +100°C (NBR) Coupling system with single-hand operation. UltraFlo Interchangeability -20°C up toon +100°C (NBR) depending on the •tUS-MIL-SPEC-C-4109 depending the medium. valve for optimum flow and low pressure drop. Steel Industr. Interchange 1/4" sleeve counters oscillating forces. The high insertion medium.

•tISO 6150 B US-MIL-SPEC-C-4109 * For temperatures below -20°C and over depth is guaranteed by an optimised plug guide. tRectus ISO 6150 • 24,B 1400, 1423 +100°C and depending on the medium, * For temperatures below -20°C and over t Rectus 24, 1400, 1423 other seal variants (FKM, EPDM, FFKM) are • Cejn 310 t Cejn 310 +100°C and depending on the medium, other available.

3000 Hansen 3000 seal variants (FKM, EPDM, FFKM) are available. •tHansen Faster •tFaster Gromelle 600 Single •ttGromelle 600 + 30 1/4" Parker 20 1/4" Shut-Off •tParker 30 1/4" JWL 52120+1/4" JWL+531 • JWL 521 + JWL 531 RECTUS 23 SERIES QUICK CONNECTORS

Working Pressure**

Single

Shut-Off RECTUS 23 SERIES QUICK COUPLING FEMALE THREAD VALVED 35 bar Working PartPressure** Number Thread Thread Body Material ** maximum static working pres35 bar Size ** maximum static working pressure with safety factor 4 to 1.

23KAIW13MPN R1/4" FEM STEEL NICKEL PLATED sure with safety factor 4 1/4" to 1.

23KAIW17MPN 3/8" R3/8" FEM STEEL NICKEL PLATED 23KAIW21MPN 1/2" R1/2" FEM STEEL NICKEL PLATED

Material Material Coupling: Brass Steel nickel RECTUS 23/ SERIES QUICK COUPLING MALE THREAD VALVED Coupling: plated Part Number Thread Thread Body Material Plug: Steel nickel plated or Brass plated Size Seals: NBR

23KAAK13MPN 23KAAK17MPN 23KAAK21MPN Interchangeability

1/4" 3/8" 1/2"

Brass / Steel nickel

Plug: Steel nickel plated or Brass R1/4" MALE STEEL NICKEL PLATED Seals: NBR R3/8" MALE STEEL NICKEL PLATED R1/2" MALE STEEL NICKEL PLATED

Flow diagrams Air Pressure Drop (bar)

KA

KA

Flow Rate in l/min

t Industr. Interchange 1/4" RECTUS 23 SERIES QUICK COUPLING HOSE BARB VALVED t US-MIL-SPEC-C-4109 t ISO 6150 B Part Number Barb Hose Body Material Interchangeability t Rectus 24, 1400, 1423 Size t Cejn 310 t Industr.

23KATF06MPN 1/4" 1/4" STEEL NICKEL PLATED Interchange 1/4" t Hansen 3000 t Faster 23KATF09MPN 3/8" 3/8" STEEL NICKEL PLATED t US-MIL-SPEC-C-4109 t Gromelle 600 23KATF13MPN 1/2" 1/2" STEEL NICKEL PLATED t ISO 6150 B t Parker 20 1/4" + 30 1/4" t JWL 521 + JWL 23 531SERIES NIPPLE FEMALE THREAD UNVALVED t Rectus 24, 1400, 1423 RECTUS

SERIES 23 SAFETY QUICK COUPLING SERIES 23 QUICK COUPLING FEMALE THREAD VALVED t Hansen 3000 Part Number Thread Thread Body Material t Faster 23SFIW10SXN R1/8" FEM STEEL NICKEL PLATED Flow diagrams Size 23SFIW13SXN R1/4" FEM STEEL NICKEL PLATED 600 t Gromelle Air 23S1213-1 R1/4" FEM COMPOSIT 23SFIW17SXN R3/8" FEM STEEL NICKEL PLATED20 1/4" t Parker + 30 1/4" 1/4" 23S1217-1 3/8" R3/8" FEM COMPOSIT 23SFIW21SXN R1/2" FEM STEEL NICKEL PLATED t JWL 521 + JWL 531 23S1221-1 1/2" R1/2" FEM COMPOSIT RECTUS 23 SERIES NIPPLE MALE THREAD UNVALVED RECTUS 23 SERIES QUICK COUPLING MALE THREAD VALVED Part Number Thread Thread Body Material Part Number Thread Thread Body Material Size Size 23SFAK10SXN 1/8" R1/8" FEM STEEL NICKEL PLATED 23S1113-1 1/4" R1/4" MALE COMPOSIT 23SFAK13SXN 1/4" R1/4" FEM STEEL NICKEL PLATED Flow diagrams Flow Rate in l/min 23S1117-1 3/8" R3/8" MALE COMPOSIT 23SFAK17SXN 3/8" R3/8" FEM STEEL NICKEL PLATED AirPLATED 23S1121-1 1/2" R1/2" MALE COMPOSIT 23SFAK21SXN 1/2" R1/2" FEM STEEL NICKEL Thread Size 1/8" 1/4" 3/8" 1/2"

Thread

t Cejn 310 Body 58 Material

RECTUS 23 SERIES NIPPLE HOSE BARB UNVALVED Part Number Barb Hose Body Material Size 23SFTF06SXN 1/4" 1/4" STEEL NICKEL PLATED 23SFTF09SXN 3/8" 3/8" STEEL NICKEL PLATED 23SFTF13SXN 1/2" 1/2" STEEL NICKEL PLATED

Pressure Drop (bar)

Pressure Drop (bar)

Part Number

RECTUS 23 SERIES QUICK COUPLING HOSE BARB VALVED Part Number Barb Hose Body Material Size 23S1006-1 1/4" 1/4" COMPOSIT 23S1010-1 3/8" 3/8" COMPOSIT 23S1013-1 1/2" 1/2" COMPOSIT

Low Pressure

Safety

14

9-14. Quick Couplings

= 43 mm²

Technical Description Breathing This coupling system has been developed speAir Dust Prot Technical Description cifically for the area of breathing protection.

Working Pressure** Working Pressure** for Couplin Coupling system with single-hand operation.

This coupling system has been developed specifically 35bar bar 35 UltraFlo valve for optimum and low presfor Plug Pa for the area offlow breathing protection. ** maximum static working pres** maximum static working sure with safety factor 4 to 1. sure drop.Coupling Additional safety locking system withsystem. single-hand operation.

UltraFlo pressure with safety factor 4 to 1.

Rectus Series This safety lock prevents unintentional discon-

KS

valve for optimum flow and low pressure drop. Addi-

nection. To disconnect, plug must first be This Material Material lock prevents tional safetythe locking system. safety pushed further into the coupling before it can To disconnect, Coupling: Brass Brass Coupling: unintentional disconnection. the plug Plug: Brass or Stainless Steel be unlocked.

Plug: Brass or Stainless must first be pushed further into the coupling before Steel Seals: NBR or FKM Tested according EN 139 standard.

Seals: NBR or FKM it can be unlocked.

23

Technical Description 1/4" industrial coupling according to ISO 6150 B and US MIL-SPEC 4109. Especially suitable for use with gaseous media in industry.

Coupling system with single-hand operation. UltraFlo valve for optimum flow and low pressure drop. Steel sleeve counters oscillating forces. The high insertion depth is guaranteed by an optimised plug guide.

Tested according EN 139 standard.

Dust Protections (P. 319)

Dust Protections for Coupling Part.-No. SK23S for Coupling Part.-No. SK23S for Plug Part.-No. SK12S Working Temperature*

Working T -20°C up t depending

* For temp +100°C a other sea available.

-20°C up to +100°C (NBR)

Working dependingTemperature* on the medium.

-20°C up to +100°C (NBR) depending on the * For temperatures below -20°C and over medium. +100°C and depending on the medium,

KS

other seal variants (FKM, EPDM, FFKM) are * For temperatures below -20°C and over available.

Breathing +100°C and depending on the medium, Air other seal variants (FKM, EPDM, FFKM) are available.

KA

Working Pressure** 35 bar ** maximum static working pres- Flow diagrams sure with safety factor 4 to 1. Air

Single

plated Seals: 96plated SERIES QUICK COUPLING MALE THREAD VALVED Plug:RECTUS Steel nickel or Brass Seals:Part NBRNumber Thread Thread Body Material

Size 96KSAK13BPN 1/4" Interchangeability 96KSAK17BPN 3/8" t Industr. Interchange 1/4" 96KSAK21BPN 1/2" t US-MIL-SPEC-C-4109

R 1/4" R 3/8" R 1/2"

BRASS BRASS BRASS

t ISO 6150 B RECTUS 96 SERIES QUICK COUPLING HOSE BARB VALVED t Rectus 24, 1400, 1423 Barb Hose Body Material t CejnPart 310 Number t Hansen 3000 Size t Faster 96KSTF06BPN 6MM 1/4" BRASS t Gromelle 600 96KSTF07BPN 7MM BRASS t Parker 20 1/4" + 30 1/4"7MM 282 t JWL96KSTF09BPN 521 + JWL 531 9MM 9MM BRASS

96KSTF10BPN 10MM 96KSTF13BPN 13MM

3/8" 1/2"

BRASS BRASS

NBR or FKM

Flow Rate in l/min UNVALVED RECTUS 96 SERIES NIPPLE MALE THREAD Part Number Thread Thread Body Material Size 96SSAK13MXN 1/4" R 1/4" BRASS 96SSAK17MXN 3/8" R 3/8" BRASS 96SSAW17RXX 3/8" G 3/8" STAINLESS STEEL

RECTUS 96 SERIES NIPPLE HOSE BARB UNVALVED Part Number Barb Hose Body Material Size 96SSTF06MXN 6MM 1/4" BRASS 96SSTF09MXN 9MM 3/8" BRASS 96SSTF13MXN 13MM 1/2" BRASS

Flow diagrams Air

Flow diagrams Air Pressure Drop (bar)

Flow Rate in l/min

Pressure Drop (bar)

Shut-Off RECTUS 96KS SERIES BREATING AIR Working Pressure** QUICK CONNECTORS 35 bar RECTUS 96 SERIES NIPPLE FEMALE THREAD UNVALVED RECTUSstatic 96 SERIES ** maximum workingQUICK pres- COUPLING FEMALE THREAD VALVED surePart with Number safety factorThread 4 to 1.

Part Number Thread Thread Body Material Thread Body Material Material Size Size Brass 1/4" G 1/4" BRASS 96KSIW13BPN 1/4" G 1/4" BRASSCoupling:96SSIW13MXN Material or Stainless Steel 96SSIW17MXN 3/8" G 3/8" BRASS 96KSIW17BPN 3/8" G 3/8" BRASSPlug: Brass Coupling: Brass / Steel nickel

Pressure Drop (bar)

5 mm²

Mento Hoses and Couplings Catalogue

7,4 Rectus 96 Series

Low Pressure

ameter

Nominal Diameter

Technical Description This coupling system has been developed specificall for the area of breathing protection.

Coupling system with single-hand operation. UltraFlo valve for optimum flow and low pressure drop. Additional safety locking system. This safety lock prevent unintentional disconnection. To disconnect, the plug must first be pushed further into the coupling before it can be unlocked.

Tested according EN 139 standard.

Mento Hoses and Couplings Catalogue

9-15. Quick Couplings

Cam-Lock Type A - Male Adaptor x Female Thread Size 1/2”

Aluminium

Brass

Stainless Steel

Thread available BSPP or NPT

Part No. Aluminium 50-A-AL

3/4” x 1/2” BSPP or NPT 7550-A-AL 3/4” BSPP or NPT 75-A-AL 1” BSPP or NPT 100-A-AL 1 1/4” BSPP or NPT 125-A-AL 1 1/2” BSPP or NPT 150-A-AL 2” BSPP or NPT 200-A-AL 2 1/2” BSPP or NPT 250-A-AL 3” BSPP or NPT 300-A-AL 4” BSPP or NPT 400-A-AL 5” BSPP or NPT 500-A-AL 6” BSPP or NPT 600-A-AL 8” BSPP or NPT 800-A-AL Polypropylene available upon request When ordering add NPT/BSP to part no.

Part No. Brass 50-A-BR

Part No. Stainless Steel 50-A-SS

7550-A-BR 75-A-BR 100-A-BR 125-A-BR 150-A-BR 200-A-BR 250-A-BR 300-A-BR 400-A-BR

75-A-SS 100-A-SS 125-A-SS 150-A-SS 200-A-SS 250-A-SS 300-ASS 400-A-SS 500-A-SS 600-A-SS

600-A-BR

Type B - Female Coupler x Male Thread Size 1/2”

Aluminium

Brass

Stainless Steel

Thread available BSPT or NPT

Part No. Aluminium 50-13-AL

3/4” BSPT or NPT 75-13-AL 1” BSPT or NPT 100-B-AL 1 1/4” BSPT or NPT 125-B-AL 1 1/2” BSPT or NPT 150-B-AL 2” BSPT or NPT 200-B-AL 2 1/2” BSPT or I\IPT 250-B-AL 3” BSPT or I\IPT 300-B-AL 4” BSPT or NPT 400-B-AL 5” BSPT or NPT 500-B-AL 6” BSPT or NPT 600-B-AL Polypropylene available upon request When ordering add NPT/BSP to part no.

Part No. Brass 50-B-BR

Part No. Stainless Steel 50-B-SS

75-B-BR 100-B-BR 125-B-BR 150-B-BR 200-B-BR 250-B-BR 300-B-BR 400-B-BR 500-B-BR 600-B-BR

75-B-SS 100-B-SS 125-B-SS 150-B-SS 200-B-SS 250-B-SS 300-B-SS 400-B-SS 600-B-SS

Type D - Male Adaptor x Female Thread Size 1/2”

Aluminium

Brass

Stainless Steel

Thread available BSPP or NPT

Part No. Aluminium 50-D-AL

3/4” BSPP or NPT 75-D-AL 1” BSPP or NPT 100-D-AL 1 1/4” BSPP or NPT 125-D-AL 1 1/2” BSPP or NPT 150-D-AL 2” BSPP or NPT 200-D-AL 2 1/2” BSPP or NPT 250-D-AL 3” BSPP or NPT 300-D-AL 4” BSPP or NPT 400-D-AL 5” BSPP or NPT 500-D-AL 6” BSPP or NPT 600-D-AL 8” BSPP or NPT 800-D-AL Polypropylene available upon request When ordering add NPT/BSP to part no.

Part No. Brass 50-D-BR

Part No. Stainless Steel 50-D-SS

75-D-BR 100-D-BR 125-D-BR 150-D-BR 200-D-BR 250-D-BR 300-D-BR 400-D-BR

75-D-SS 100-D-SS 125-D-SS 150-D-SS 200-D-SS 250-D-SS 300-D-SS 400-D-SS

600-D-BR

600-D-SS

15

Mento Hoses and Couplings Catalogue

9-16. Quick Couplings

Cam-Lock Type C - Female Coupler x Male Thread Size 1/2”

Aluminium

Brass

Stainless Steel

Part No. Aluminium 50-C-AL

Part No. Brass 50-C-BR

75-C-AL 75-C-BR 3/4” 100-C-AL 100-C-BR 1” 125-C-AL 125-C-BR 1 1/4” 150-C-AL 150-C-BR 1 1/2” 200-C-AL 200-C-BR 2” 250-C-AL 250-C-BR 2 1/2” 300-C-AL 300-C-BR 3” 400-C-AL 400-C-BR 4” 500-C-AL 5” 600-C-AL 600-C-BR 6” 800-C-AL 8” Polypropylene available upon request

Part No. Stainless Steel 50-C-SS 75-C-SS 100-C-SS 125-C-SS 150-C-SS 200-C-SS 250-C-SS 300-C-SS 400-C-SS 600-C-SS

Type E - Male Adaptor x Hose Tail Size 1/2”

Aluminium

Brass

Stainless Steel

Aluminium Thread Available: BSPT or NPT

Brass Thread Available: BSPT or NPT Stainless Steel Thread Available: BSPT or NPT

Part No. Aluminium 50-E-AL

Part No. Brass 50-E-BR

7550-E-AL 7550-E-BR 3/4” x 1/2” 75-E-AL 75-E-BR 3/4” 100-E-AL 100-E-BR 1” 125-E-AL 125-E-BR 1 1/4” 150-E-AL 150-E-BR 1 1/2” 200-E-AL 200-E-BR 2” 250-E-AL 250-E-BR 2 1/2” 300-E-AL 300-E-BR 3” 400-E-AL 400-E-BR 4” 500-E-AL 5” 600-E-AL 600-E-BR 6” 800-E-AL 8” 801-E-AL 8” Polypropylene available upon request

Part No. Stainless Steel 50-E-SS 7550-E-SS 75-E-SS 100-E-SS 125-E-SS 150-E-SS 200-E-SS 250-E-SS 300-E-SS 400-E-SS 500-E-SS 600-E-SS

Type F - Male Adaptor x Male Thread Size 1/2”

Part No. Aluminium 50-F-AL

Part No. Brass 50-F-BR

7550-F-AL 7550-F-BR 3/4” x 1/2” 75-F-AL 75-F-BR 3/4” 100-F-AL 100-F-BR 1” 125-F-AL 125-F-BR 1 1/4” 150-F-AL 150-F-BR 1 1/2” 200-F-AL 200-F-BR 2” 250-F-AL 250-F-BR 2 1/2” 300-F-AL 300-F-BR 3” 400-F-AL 400-F-BR 4” 500-F-AL 5” 600-F-AL 600-F-BR 6” Polypropylene available upon request When ordering add NPT/BSP to part no.

Part No. Stainless Steel 50-F-SS 75-F-SS 100-F-SS 125-F-SS 150-F-SS 200-F-SS 250-F-SS 300-F-SS 400-F-SS 600-F-SS

16

Mento Hoses and Couplings Catalogue

9-17. Quick Couplings

Cam & Groove

17

Cam-Lock

King Crimp Cam & Groove

Type DC - Dust Cap

Part No. Part No. Part No. Aluminium Brass Stainless Steel SAFETY ALERT 50-DC-BR 50-DC-SS 1/2” Only use the crimp50-DC-AL style shanks with the crimp style sleeves and ferrules.

Size

B

Due to differences in3/4” dimensions and tolerances do not interchange other manufacturer’s products 75-DC-ALfor safety reasons, 75-DC-BR 75-DC-SS with Dixon products.

1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 4” 5” 6”

Aluminium

Brass Cam & Groove Stainless Steel

King Crimp Cam & Groove

100-DC-AL 100-DC-BR 100-DC-SS 125-DC-AL 125-DC-BR 125-DC-SS 150-DC-AL EZ BOSS-LOCK 150-DC-BR TYPE C150-DC-SS COUPLERS 200-DC-BR 200-DC-SS PART NO.200-DC-AL 316 STAINLESS STEEL HOSE ID 250-DC-AL 250-DC-BR 250-DC-SS RC100EZCR 1” 300-DC-AL 300-DC-BR 300-DC-SS RC150EZCR 11/2” 400-DC-AL 400-DC-BR 400-DC-SS RC200EZCR 2” RC300EZCR 3” 500-DC-AL 500-DC-BR RC400EZCR 4” 600-DC-AL 600-DC-AL RC600EZCR 6”

800-DC-AL 8” Polypropylene available upon request

SAFETY ALERT

B

Type DP - Dust Plug

Part No.sleeves and ferrules.

Part No. Part No. Only use the crimp style shanks with the crimp style Size Brass Stainless Steel Due to differences in dimensions and tolerances for safety reasons,Aluminium do not interchange other manufacturer’s products 50-DP-BR 50-DP-SS 1/2” with Dixon products.

3/4” 1” 1 1/4” PART NO. 1 1/2” RC100EZCR 2” RC150EZCR 2 1/2” RC200EZCR RC300EZCR 3” RC400EZCR 4” RC600EZCR 5”

Aluminium

Brass

Stainless Steel

75-DP-AL 75-DP-BR 75-DP-SS 100-DP-AL 100-DP-BR 100-DP-SS TYPE C COUPLER EZ BOSS-LOCK TYPE C COUPLERS ALUMINIUM* STEEL 125-DP-AL BRASS 125-DP-BRSTAINLESS 125-DP-SS 316 STAINLESS STEEL HOSE ID PART NO. 150-DP-AL PART NO. 150-DP-BRPART NO. 150-DP-SS 1” 200-DP-AL 100-C-EC-BR 200-DP-BR 200-DP-SS 100-C-EC-AL 100-C-EC-SS 11/2” 150-C-EC-AL 150-C-EC-BR 150-C-EC-SS 250-DP-AL 250-DP-BR 250-DP-SS 2” 200-C-EC-AL 200-C-EC-BR 200-C-EC-SS 3” 300-DP-AL 300-C-EC-BR 300-DP-BR 300-DP-SS 300-C-EC-AL 300-C-EC-SS 4” 400-C-EC-AL 400-C-EC-SS 400-DP-AL 400-C-EC-BR 400-DP-BR 400-DP-SS 6” 500-DP-AL

*A380 permanent mold aluminium

600-DP-AL 6” Polypropylene available upon request

600-DP-BR

HOSE ID

1” 11/2” 2” 3” 4”

600-DP-SS

Cam-Lock type King Crimp ALUMINIUM* PART NO. 100-C-EC-AL 150-C-EC-AL 200-C-EC-AL 300-C-EC-AL 400-C-EC-AL

TYPE COUPLER KING C CRIMP CAMLOCK & FERRULE TYPE E ADAPTERS STAINLESS HOSE ID Material BodyBRASS STEEL HoseSTAINLESS Tail STEEL PART NO. TYPE C 1" SS316 PART NO. PART NO. 100-E-EC-SS TYPE E 1" SS316 100-C-EC-BR 100-C-EC-SS 1” 100-E-EC-AL TYPE100-E-EC-BR 200-C-EC-SS C 2"100-E-EC-SS SS316 150-C-EC-BR 150-C-EC-SS 11/2” 150-E-EC-AL TYPE150-E-EC-BR 200-E-EC-SS E 2"150-E-EC-SS2” SS316 200-C-EC-BR 200-C-EC-SS PartBRASS No. ALUMINIUM* PART NO. 100-C-EC-SS PART NO.

Groove 200-E-EC-ALCam & 200-E-EC-BR 300-C-EC-BR 300-C-EC-SS 300-E-EC-AL 300-E-EC-BR 400-C-EC-BR 400-C-EC-SS 400-E-EC-AL 400-E-EC-BR

200-E-EC-SS 3” 300-E-EC-SS 4” 400-E-EC-SS

CRIMP STYLE FERRULES *A380 permanent mold aluminium permanent mold aluminium 304 STAINLESS *A380 HOSE ID HOSE OD

CARBON STEEL PART NO.

46

CF100-1CS CF100-2CS CF100-CS CF100-4CS CF100-5CS CF100-6CS CF100-7CS CF100-8CS CF100-9CS CF100-10CS CF150-1CS CF150-2CS CF150-3CS CF150-4CS CF150-5CS CF150-6CS CF150-7CS CF150-8CS CF150-9CS CF150-10CS CF150-11CS CF150-12CS

STEEL PART NO.

CF100-1SS CF100-2SS CF100-3SS CF100-4SS CF100-5SS CF100-6SS CF100-7SS CF100-8SS CF100-9SS CF100-10SS CF150-1SS CF150-2SS CF150-3SS CF150-4SS CF150-5SS CF150-6SS CF150-7SS CF150-8SS ALUMINIUM* CF150-9SS CF150-10SS PART NO. CF150-11SS CF150-12SS

FROM 1”

Part No. CF100-4SS CF100-5SS CF200-5SS CF200-6SS 1½” Telephone: +44 (0)1772CF200-7SS 323529 CF200-8SS BRASS PART NO.

TO

30.56 31.75 FERRULES 32.15 33.34 33.73 34.93 Dim 35.32 36.51 36.91 35.3238.50 - 36.51 MM38.10 39.69 36.9140.08 - 38.1 MM41.28 41.67 42.86 62.3143.26 - 63.5 MM44.45 44.85 46.04 63.9 41.67 - 65.09 MM42.86 43.26 65.4844.85 - 66.68 MM44.45 46.04 67.0746.43 - 68.26 MM47.63 48.02 49.21 49.61 50.80 TYPE E ADAPTERS

51.20 52.39 52.78 53.98 STAINLESS STEEL 54.37 55.56 55.96 PART NO. 57.15 57.55 58.74 59.13 60.33

Material B SS316 SS316 SS316 SS316 Fax: +44 (0)1772 314664 SS316 SS316 HOSE ID

HOSE ID

1” 11/2” 2” 3” 4”

Mento Hoses and Couplings Catalogue

18

9-18. Quick Couplings

Claw Couplings Part Number MB1 AMB AM2 AM7 AM12 ABB1 ABB AB2 AB7 AB12 RAM2 RAM7 RAM12

Male NPT End Size Material 1/4” Steel 3/8” Steel 1/2” Steel 3/4” Steel 1” Steel 1/4” 3/8” 1/2” 3/4” 1”

Brass Brass Brass Brass Brass

1/2” 316 Stainless Steel 3/4” 316 Stainless Steel 1” 316 Stainless Steel

Female NPT End Part Number Size Material AMC1 1/4” Steel AMC 3/8” Steel AM3 1/2” Steel AM8 3/4” Steel AM13 1” Steel ABC1 ABC AB3 AB8 AB13 RAM3 RAM8 RAM13

1/4” 3/8” 1/2” 3/4” 1”

Brass Brass Brass Brass Brass

1/2” 316 Stainless Steel 3/4” 316 Stainless Steel 1” 316 Stainless Steel

Air King Triple Connector Part Number Material AM10 Steel AB10 Brass

Safety Clips Part Number Description AC1 Safety Clips (In bags of 25) Same size for all coupling sizes

AMH AM1 AM5 AM6 AM11

Hose End Size Material 1/4” Steel 3/8” Steel 1/2” Steel 5/8” Steel 3/4” Steel 1” Steel

ABH AB1 AB5 AB6 AB11

3/8” 1/2” 5/8” 3/4” 1”

Part Number

RAM1 RAM6 RAM11

Brass Brass Brass Brass Brass

1/2” 316 Stainless Steel 3/4” 316 Stainless Steel 1” 316 Stainless Steel

Air King Blank Cap Part Number Material AM0 Steel AB0 Brass RAM0 316 Stainless Steel Air King Universal Swivels Part Number Material AM2SWIV 1/2” Male NPT AM6SWIV 3/4” Hose End AM7SWIV 3/4” Male NPT AM8SWIV 3/4” Female NPT Part Number ACL8

Safety Clips Material Lanyards (in bags of 25) Same size for all coupling sizes

Safety Clips Part Number Description AC7 Stainless Steel Clips. Same size for all coupling sizes SAFETY CLIP WITH CHAIN & KEY RING Part Number Description AC-7-150 DIXON SAFETY PIN W/CHAIN & KEY RING WASHERS Part No. AWR4 All sizes for 2-LUG Buna-N AWS6 All sizes for 2-LUG Neoprene AWR14 All sizes for 4-LUG Buna-N KING QUICK-ACTING HOSE END COUPLINGS Part No. Size Material AM16 1.1/4” Steel AM21 1.1/2” Steel AM26 2” Steel AB16 1.1/4” Brass AB21 1.1/2” Brass AB26 2” Brass KING QUICK-ACTING FEMALE NPT END COUPLINGS Part No. Size Material AM18 1.1/4” Steel AM23 1.1/2” Steel AM28 2” Steel AB18 1.1/4” Brass AB23 1.1/2” Brass AB28 2” Brass AIR KING CLAMPS Part No. Size CD 3/8” A4 1/2” A9 3/4” A10 1” A14 1”

From-To Torque 17.5-22.2 6 25.4-30.1 6 28.6-33.3 12 33.3-38.1 12 38.1-46.4 21

4 BOLT TYPE 2 GRIPPING FINGERS Part No. Size DD 1/2” B5 1/2” BU9 3/4” B9 3/4” B10 3/4” BU14 1” B14 1” 187* 1 1/4” BU19 1 1/4” B22 1 1/2” 225* 1 1/2” BU28 2” BU29 2”

From-To 20.5-24.0 27.0-30.0 30.0-33.0 33.0-38.0 38.0-43.0 39.0-43.5 43.0-49.0 43.0-47.5 45.5-53.0 51.0-56.0 52.5-57.0 59.5-64.5 63.5-71.0

Air Receiver Manifold Assembly Mento Hoses and Couplings Catalogue with Air King Couplers 9-19. Quick Couplings

Air Receiver Manifold Assembly Safely distributes compressed air to machines and tools

 �   �

CLAW COUPLINGS Service: PART NUMBER DESCRIPTION • 7 gallon capacity provides air reserve needed for operationWITH of tools 1217AR-4AK AIR RECIEVER MANIFOLD ASSEMBLY AIR KING COUPLERS

• 200 PSI maximum working pressure for tank (Working pressure of the system is limited to

maximum working pressure of the components, i.e. 150 PSI forComponents: Air King) Service: • 7 gallon capacity provides air reserve needed • Spring-loaded safety shut-off valves Features: for operation of tools (Cut-off Flow Rate 160-180 CFM at 90 PSI) • All tank outlets have female NPT threads • Safety pop-off valve (200 PSI) to protect against • •200 PSI maximum working pressure for tank Portable - easy carry handles standard over-pressurizing of tank pressure the system is limited to maximum working •(Working Solid base with of mounting holes standard of the tank components, i.e. 150 Air King) • 0-300 PSI gauge •pressure Approximate dimensions arePSI 12"for x 17"; 40" x 24" with frame • Locking handle ball valves • painted safety yellow Features: • Drain valve provides for removal of accumulated oil and water • Components: All tank outlets have female NPT threads • •Portable - easy carry handles standard Spring-loaded safety shut-off valves (Cut-off Flow Rate 160-180 CFM at 90 PSI) • •Solid basepop-off with mounting holes standard Safety valve (200 PSI) to protect against over-pressurizing of tank • •Approximate tank dimensions are 12" x 17"; 40" x 24" with frame 0-300 PSI gauge Locking handle ball valves • •painted safety yellow • Drain valve provides for removal of accumulated oil and water Codes and Standards: • Built to ASME Code, National Board registered • Conforms to OSHA Standards 1910.169 and 1926.306

19

Mento Hoses and Couplings Catalogue

20

9-20. Quick Couplings

Laux Model C

Bend 30°

Male part with M thread

KRKB Part Number Request “ “ “ “ “ “

Size 50/30° 70/30° 89/30° 108/30° 133/30° 159/30° 216/30°

KVG Part Number Size 8003050 50 x 11/2” 8003070 70 x 21/2” 8003089 89 x 3” 8003108 108 x 4” 8003133 133 x 5” 8003159 159 x 6”

Female part with M thread

KMG Part Number 8002050 8002070 8002089 8002108 8002133 8002159

Size 50 x 11/2” 70 x 21/2” 89 x 3” 108 x 4” 133 x 5” 159 x 6”

Flange unit with male part

KVF Part Number 8011050 8011070 8011089 8011108 8011133 8011159 8011999

Size 50xDN50 70xDN65 89xDN80 108xDN100 133xDN125 159xDN150 216xDN200

Flange unit with female part

KMF Part Number 8010050 8010070 8010089 8010108 8010133 8010159 8010999

Size 50xDN50 70xDN65 89xDN80 108xDN100 133xDN125 159xDN150 216xDN200

KVS-K Part Number Request “ “ “ “ “ “ “

Size 50x50 70x63 89x76 108x102 108x110 133x125 159x150 216x200

KMS-K Part Number Request “ “ “ “ “ “ “

Size 50x50 70x63 89x76 108x102 108x110 133x125 159x150 216x200

Male part with machined hose

Female part with machined hose

Rolled hose connection with M

KVSI Part Number 8001050 8001070 8001089 8001108 8001110 8001133 8001159 8001216

Size 50 x 50 70 x 63 89 x 89 108 x 102 108 x 110 133 x 125 159 x 150 216 x 200

Rolled hose connection with F p

KMSI Part Number 8000050 8000070 8000089 8000108 8000110 8000133 8000159 8000216

Size 50 x 50 70 x 63 89 x 89 108 x 102 108 x 110 133 x 125 159 x 150 216 x 200

Male part with corrugated hose

KVSD Part Number Size Request 50 x 50/1 “ 50 x 50/2 “ 108 x 102/1 “ 108 x 102/2 “ 159 x 150/2

Female part with corrugated hose

KMSD Part Number Size Request 50 x 50/1 “ 50 x 50/2 “ 108 x 102/1 “ 108 x 102/2 “ 159 x 150/2

Y with male connection

KAVY Part Number Request “ “ “ “ “ “

Size 50x50 70x70 89x89 108x108 133x133 159x159 216x216

Y with female connection

KAYM Part Number Request “ “ “ “ “ “

Size 50x50 70x70 89x89 108x108 133x133 159x159 216x216

Foot valve with male part

KSKV Part Number Request “ “ “ “ “ “

Size 50x50 70x70 89x89 108x108 133x133 159x159 216x216

Laux Model 42 / Bauer also available.

Mento Hoses and Couplings Catalogue

21

9-21. Quick Couplings

Nor Couplings LOCK NO.1

Hose Tail Aluminium Part No 1.1/2” 2228038 2228050 2” 2.1/2” 2228063 2228076 3” Dim

Brass Part No 2229038 2229050 2229063 2229076

Type tail tail tail tail

Couplings with male thread

Couplings with female thread

Aluminium Part No 2228538 2228550 2228563 2228576

Aluminium Part No 2228638 2228650 2228663 2228676

Brass Part No 2229538 2229550 2229563 2229576

Type male thread male thread male thread male thread

Brass Part No 2229638 2229650 2229663 2229676

Type fem. thread fem. thread fem. thread fem. thread

OTHER LOCK NO ON REQUEST

TW Couplings

Male coupler with BSP female thread

Female coupler assembly made up from handle and clamping Female coupler clamping ring ring with BSP female thread incl. seals

Part No VKR-050-2 VKR-075-3 VKR-100-4

Part No MKR-050-2 MKR-075-3 MKR-100-4

AL AL AL

Material MS SS MS SS MS SS

PP PP PP

AL AL AL

Material MS SS MS SS MS SS

MS: NBR (Nitril)

Seal

Female coupler clamping ring

Female blind cap for VKR

Part No MKV-050-2 MKV-075-3 MKV-100-4

Part No MBR-050-2 MBR-075-3 MBR-100-4

AL AL AL

PP PP PP

Material MS SS MS SS MS SS

PP PP PP

Storz Couplings Available in all models an materials

AL AL AL

Material MS SS MS SS MS SS

Part No MKLH-050-2 MKLH-075-3 MKLH-100-4

AL AL AL

Material MS SS MS SS MS SS

PP PP PP

SS: CSM Hypalon

Male blind cap for MKR coupling PP PP PP

Part No VBR-050-2 VBR-075-3 VBR-100-4

AL AL AL

Material MS SS MS SS MS SS

PP PP PP

STEAM COUPLINGS

1” 11/4” 11/2” 2” 21/2” 3”

Mento Hoses and Couplings Catalogue

9-22. Quick Couplings

“Boss” Ground Joint Seal Couplings Sizes:

1/4”

Materials:

Plated Steel and/or Malleable Iron, Stainless Steel and Brass

Pressure:

Maximum working pressure 600 psi (using “Boss” clamps at correct torque setting)

Details:

“Boss” Non-Metallic Polymer Seat (U.S. Patent No. 5, 577, 777) is not subject to

to 6”

22

3/4”

BMS6 BMS11 BMS16 BMS21 BMS26 BMS36

Boss Couplings

corrosion and offers resistance to chemicals and steam found in manufacturing facilities. A precision machined recess holds the seat firmly in place, allowing it

Sizes: Materials: Pressure: Details:

1/2” 3/4”

RMS1 RMS6 RMS11 RMS16 RMS21 RMS26 RMS31 RMS36

harsh punishment. Recommended for steam service up to 450°F (232°C); 1/4” totoeasyabsorb 6”. to seal; works with existing “Boss” Ground Joint Stems.

PlatedUseSteel and/or Steel, Stainless Steel and Brass only with genuine “Boss” Clamps made in U.S.A. Maximum working pressure 600 psi (using “Boss” clamps at correct torque setting) “Boss” Non-Metallic Polymer Seat (U.S. Patent No. 5, 577, 777) is not subject to corrosion and offers resistance to chemicals and steam found in manufacturing facilities. A precision machined recess holds the seat firmly in place, allowing it to absorb harsh punishment. Recommended for steam service up to 450°F (232°C); easy to seal; works with existing “Boss” Ground Joint Stems.

“BOSS” COMPLETE COUPLING Use only genuineSIZE“Boss” Clamps made PARTwith NO. THREAD MATERIALin U.S.A. 1/4”

GF1* GF3* GF6 GF26 GF36 GF51 GF61 GF81** GF96 GF111 GF141 GF201*

BSP Pl./NPT BSP Pl./NPT BSP Pl./NPT BSP Pl./NPT BSP Pl./NPT BSP Pl./NPT BSP Pl./NPT BSP Pl./NPT BSP Pl./NPT BSP Pl./NPT BSP Pl./NPT BSP Pl./NPT

“BOSS

Plated Steel/Malleable Iron Plated Steel/Malleable Iron Plated Steel/Malleable Iron Plated Steel/Malleable Iron Plated Steel/Malleable Iron Plated Steel/Malleable Iron Plated Steel/Malleable Iron Plated Steel/Malleable Iron Plated Steel/Malleable Iron Plated Steel/Malleable Iron Plated Steel/Malleable Iron Plated Steel/Malleable Iron

“BOSS” COMPLETE COUPLING STEAM “BOSS” HOSE MENDER STEAM COUPLINGS COUPLINGS PART NO. 3/8” 1/2” 3/4”

1” 11/4” 11/2” 2” 21/2” 3” 4” 6”

Part no. Size Thread Material STEAM COUPLINGS Part no. Size Material GF1* M1 1/4” BSP Pl./NPT Plated Steel/Steel 1/2” Steel M1 “Boss” GF3* M6 3/8” BSP Pl./NPT Plated Steel/Steel 3/4” Steel M6 “Boss” Spud Spud Adapters Adapters M11 GF6 M11 1/2” BSP Pl./NPT Plated Steel/Steel 1” Steel RGF26 /” BSP Pl./NPT 316 Stainless Steel “Boss” Spud Adapters RGF36 1” BSP Pl./NPT 316 Stainless Steel M16 1 1/4” GF26 M16 3/4” 1BSP Pl./NPT Plated Steel/Steel Steel /” BSP Pl./NPT 316 Stainless Steel RGF51 RGF61 1 /” BSP Pl./NPT 316 Stainless Steel M21 1 1/2” RGF 81 2” BSP Pl./NPT 316 Stainless Steel GF36 M21 1” BSP Pl./NPT Plated Steel/Steel Steel FEMALE SPUD M26“BOSS” BGF26 /” BSP Pl./NPT Brass “BOSS” SPUD GF51 M26 1 1/4” BSP Pl./NPT PlatedBrass Steel/Steel STEAM COUPLINGS 2” FEMALE Steel BGF36 1” BSP Pl./NPT M31SIZE PART NO. THREADSPUD BSP Pl./NPT Brass BGF51 1 /” “BOSS” FEMALE GF61 M31 1 1/2” 1BSP Pl./NPT PlatedBrassSteel/Steel 2 1/2” Steel PART NO. SIZE THREAD BGF61 /” BSP Pl./NPT M361 BGF81 2” BSP Pl./NPT /4” 3” BSP Pl./NPT GBC NO. GF81** M36 2” BSP Pl./NPT PlatedBrassSteel/Steel Steel PART THREAD M46SIZE 31//84”” BSP Pl./NPT Pl./NPT GBC GCC BSP * GF1, GF3, GF201, are supplied with Copper Seat Spuds.

“Boss” Adapters &1/2” Hose GCC BSP Pl./NPT Pl./NPT M46 GB3 BSP Pl./NPT Plated Steel/Steel Steel **GF96 GF81 are not to be2 used with #250BSP or #306Menders “Boss” Clamps.

M661131///428””” 4” BSP Pl./NPT GBC 3//42”” BSP Pl./NPT GB3 BSP Pl./NPT GB8 GCC Pl./NPT GF111 M66 3131”//84”” 6” BSP 3” BSP Pl./NPT Plated Steel/Steel Steel BSP Pl./NPT Pl./NPT GB8 GB13 BSP GB3 /2” BSP Pl./NPT 1 GB13 1” BSP Pl./NPT BSP Pl./NPT Pl./NPT GB18 13/4/4”” GF141 4” BSP Pl./NPT Plated Steel/Steel BSP GB8 BSP Pl./NPT Pl./NPT GB18 111//24”” GB23 1 BSP GB13 1” BSP Pl./NPT 1 GF201* 6” BSP Pl./NPT Plated Steel/Steel GB23 1 /2” BSP Pl./NPT Pl./NPT GB28 BSP /4” BSP Pl./NPT GB18 1112” “BOSS” MALE STEM “BOSS” FEMALE SPUD GB28 2” BSP Pl./NPT Pl./NPT BSP GB33 GB23 1211//22”” BSP Pl./NPT *GF1, GF3, GF201, are supplied with Copper BSP Pl./NPT Pl./NPT GB33 23”/2” GB38 BSP GB28 2” BSP Pl./NPT Part no.

Size Thread Material PART NO. SIZE THREAD MATERIAL GB38 3” BSP Pl./NPT GB48 4” BSP Pl./NPT 1 Seat Spuds.

BSP Pl./NPT GB48 1/4” BSPSteel Pl./NPT GB68 BSP Pl./NPT GBCGB33 NPT 23”6”4”/2” Plated 1/4” x 1/8” GB38 BSP Pl./NPT NPT Steel MS4X2 **GF81 are not to be used with #250 or #306 GB68 6” BSP Pl./NPT 1/4” x 1/4” 4” BSPSteel Pl./NPT BSPT/NPT Steel MSA GCCGB48 3/8” NPT 3/4” Plated BSP Pl./NPT RGB8 1 3 GB68 6” BSP Pl./NPT MSB /4” x /8” BSPT/NPT Steel “Boss” Clamps.

3 / 4 ” BSP Pl./NPT RGB8 BSPSteel Pl./NPT Telephone: +44 (0) 1772 323529 Fax: +44 (0) 3 1772 1 314664 GB3RGB13 1/2” NPT 1” Plated 34

K

14 12

34

14 12

296

MS6X4 MSC MS6X8 MS8X4 MS8X6 MS1 MS8X12 MS12X8 MS6 MS12X16 MS16X12 MS11

/8” 38 38 1/2”

x /4”

NPT BSPT/NPT NPT NPT NPT BSPT/NPT NPT NPT BSPT/NPT NPT NPT BSPT/NPT

/ ”x / ” “BOSS” MALE / ” x STEM /”

Part no.

Size MS4X2 1/4” x 1/8” MSA 1/4” x 1/4” MSB 1/4” x 3/8” MS6X4 3/8” x 1/4” MSC 3/8” x 3/8” MS16 3/8” x 1/2” MS6X8 MS21 MS8X4 MS26 1/2” x 1/4” MS31 1/2” x 3/8” MS8X6 MS36 MS1MS46 1/2” x 1/2” MS8X12 1/2” x 3/4” RMS1 RMS6 3/4” x 1/2” MS12X8 RMS11 MS6RMS163/4” x 3/4” RMS21 MS12X16 3/4” x 1” RMS26 RMS31 1” x 3/4” MS16X12 MS11RMS36 1” BMS6 BMS11 BMS16 BMS21 BMS26 BMS36

MS16 MS21 MS26 MS31 MS36 MS46

1 1/4” 1 1/2” 2” 2 1/2” 3” 4”

38 12 1/4”

x Thread Material x 3/8” NPT Steel x 1/2” x 3/4” BSP/NPT Steel 3/4” x 1/2” 3/4” x 3/4” BSP/NPT Steel 3/4” x 1” Steel 1” NPT x 3/4” 1” BSP/NPT Steel 1/4” 1NPT BSPT/NPT Steel 11/2” BSPT/NPT NPT Steel 2” BSPT/NPT 1/2” 2NPT BSPT/NPT Steel 3” BSPT/NPT BSP/NPT Steel 4” BSPT/NPT Steel 1NPT /2” BSPT/NPT 3/4” BSPT/NPT NPT Steel 1” BSPT/NPT BSP/NPT Steel 11/4” BSPT/NPT BSPT/NPT 11/2” NPT Steel 2” BSPT/NPT 1/2” 2NPT BSPT/NPT Steel 3” BSPT/NPT BSP/NPT Steel 1/2” 1/2” 1/2”

3/4” 1” 11/4” 11/2” 2” 3”

BSPT/NPT

BSPT/NPT BSPT/NPT BSP/NPT K KSteel BSPT/NPT BSP/NPT K Steel BSPT/NPT BSPT/NPT

BSP/NPT BSP/NPT BSP/NPT BSP/NPT

Steel Steel Steel Steel

Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel

Malleable Iron Malleable Iron Malleable Iron Malleable Iron Malleable Iron Malleable Iron

RGB13 RGB18

GB8RGB8 RGB18 3/4” RGB23 RGB23

BGB8 1 1/4” GB18 RGB28 BGB8 BGB13 GB23 BGB131 1/2” BGB18 BGB8 BGB18 BGB23 GB28 BGB13 2” BGB23 BGB28 BGB18 BGB282 1/2” GB33 BGB23 BGB28 3” GB38 GB48 4” GB68 6”

316 Stainless Steel 316 Stainless Steel 316 Stainless Steel 316 Stainless Steel 316 Stainless Steel 316 Stainless Steel 316 Stainless Steel 316 Stainless Steel Brass Brass Brass Brass Brass Brass

BSP Pl./NPT Pl./NPT BSP

BSP Pl./NPT Plated BSPSteel Pl./NPT BSP Pl./NPT BSP Pl./NPT

BSP Pl./NPT Pl./NPT Plated Steel/Steel BSP BSP Pl./NPT Pl./NPT BSP Plated Steel/Steel BSP Pl./NPT Pl./NPT BSP BSP Pl./NPT BSP Pl./NPT Pl./NPT BSP Plated Steel/Steel 1” BSP Pl./NPT 1/2” BSP Pl./NPT 112” BSP Pl./NPT Pl./NPT 1 /4” BSP 2” BSP Pl./NPT Plated Steel/Steel 1 BSP Pl./NPT 1 /2” 2” BSP Pl./NPT Plated Steel/Steel Plated Steel/Steel Plated Steel/Steel

1 11/ 1 1/ 2 21/ MAT MAT 3 Plated MAT 4 Plate Plated Plate Plated 6 Plated

Plate Plated Plated Plate Plated Plated Plate Plated Steel/ Plated Plated Steel/ Steel/ Plated Plated Plated Steel/ Steel/ Plated Plated Steel/M Plated Steel/ Steel/ Plated Plated Steel/M Plated Steel/ Steel/ Plated Plated Steel/M Plated Steel/ Steel/ Plated Plated Steel/M Plated Steel/ Steel/ Plated Plated Steel/M Plated Steel/ Plated Steel/M 316 Stain Plated Steel/M 316 Stain Stai 316 316 Stain Stai 316 316 Stain 316 Stain Stai 316 316 Stain 316 Stain Stai 316 316 Stain 316 Stai 316 Stain Br 316 Stain Br Br Br Br Br Br Br Br Br Br Br Br Br Br

“BOSS” DOUBLE SPUD X WING NUT THREAD

SIZE

MATERIAL

M1 M6 M11 M16 M21 M26 M31 M36 M46 M66

1/2” 3/4”

Steel Malleable Iron Malleable Iron Malleable Iron Malleable Iron Malleable Iron Malleable Iron Malleable Iron Malleable Iron Steel

Telephone: +44 (0) 1772 323529

NPT NPT NPT NPT NPT NPT NPT

1 1 42 131/2” /4” 32” /4” 1” 131/1” /4” 4” 1111//24””

1/2 3/4

Part no.

Size “BOSS” ThreadMALE Material PART NO. SIZE SPUD MAT xTHREAD WING NUT THREAD PART NO. THREAD MAT GMCGMC 3/8” NPT SIZE Steel/Steel 3/Plated 8” BSPT/NPT Plated Steel/ NO. THREAD MAT 13//Plated BSPT/NPT Plated Steel/ Steel/ GMC 1/2” GM3 28”” BSPT/NPT Plated GM3PART NPT SIZE Steel/Steel 31/42”” GM3 BSPT/NPT Plated Steel/ Steel/ GM8 BSPT/NPT Plated 8” BSPT/NPT Plated Steel/M GM8GMC NPT 3131”////Plated Steel/Steel GM8 3/4” 4” BSPT/NPT Plated Steel/ Steel/ GM13 BSPT/NPT Plated GM3 2” BSPT/NPT Plated Steel/M 1 GM13 1” BSPT/NPT Plated Steel/ /4” BSPT/NPT Plated Steel/M Steel/ GM18 1” GM13 NPT 11131/1Plated Steel/Steel GM8 4” BSPT/NPT Plated /24”” BSPT/NPT Plated Steel/ Steel/ GM18 GM23 / BSPT/NPT Plated GM13 1” BSPT/NPT Plated Steel/M 1 GB18GM18 NPT 1112”Plated Steel/Steel GM231 1/4” /2” BSPT/NPT Plated Steel/ Steel/ GM28 BSPT/NPT Plated /4” BSPT/NPT Plated Steel/M 1/2” GM28 BSPT/NPT Plated Steel/ Steel/ BSPT/NPT Plated GM33 /2” BSPT/NPT Plated Steel/M GB23GM23 1 1/2” NPT 12213”12”Plated Steel/Steel /2” BSPT/NPT Plated Steel/ Steel/ GM33 GM38 BSPT/NPT Plated GM28 2” BSPT/NPT Plated Steel/M GM38 3” BSPT/NPT Plated Steel/ GB28GM33 2” NPT 21Plated Steel/Steel /2” BSPT/NPT Plated Steel/M BSPT/NPT Plated Steel/M GB33GM382 1/2” NPT 3”Plated Steel/Steel GB38 3” NPT Plated Steel/Steel

“BOSS” HOSE MENDER

298 298 298

131/1” /4” 4” 1111//24””

RGB13 1” BSP Pl./NPT RGB23 +44 (0) 1772 BSP Pl./NPT Pl./NPT RGB28 BSP Telephone: 323529 BSP Pl./NPT RGB18 GB13 NPT 112”2”// ”” Plated RGB28 1” BSPSteel Pl./NPT

SIZ

“BOSS”NUT MALE THREAD SPUD x WING NUT THREAD “BOSS” MALE SPUD x WING “BOSS” MALE SPUD x WING NUT THREAD

PART NO.

1” 11/4” 11/2” 2” 21/2” 3” 4” 6”

NPT

1” 11/4” 11/2” 2” 3”

“BOSS” SPUD x WING NUT THREAD Part no.

SizeDOUBLE Material “BOSS” DOUBLE SPUD x WING NUT THREAD SIZE MATERIA GDB3“BOSS” 1/2”DOUBLE Plated Steel/Steel SPUD x WING NUT THREAD SIZE MATERIA GDB13 3/4” Plated Steel/Steel 1/2” Plated Steel/Malle SIZE MATERIA 31//42”” Plated Steel/Malle Steel/Malle Plated K GDB13 1” Plated Steel/SteelPlated 3/4” Plated Steel/Malle Steel/Malle 11” /2” Steel/Malle Plated Steel/Malle Steel/Malle GDB23 1 1/4” Plated Steel/SteelPlated /4” Plated 131/1” 4” Plated Steel/Malle 1 1 Plated Steel/Malle Steel/Malle Plated 111”//24”” Steel/Malle GDB23 1 1/2” Plated Steel/SteelPlated 1/2” Plated Steel/Malle Steel/Malle 112” Plated Plated Steel/Malle 1 1/4” 2” Plated Steel/Malle Steel/Malle Plated GDB28 2” Plated Steel/SteelPlated 1211//22”” Steel/Malle Plated Steel/Malle Steel/Malle 23”/2” Plated 2” Steel/Malle GDB33 2 1/2” Plated Steel/SteelPlated 3” Plated Steel/Malle Plated Steel/Malle 21/2” 3” GDB38 3” Plated Steel/SteelPlated Steel/Malle

PART NO. PART NO. GDB3 PART NO. GDB3 GDB13 GDB13 GDB13 GDB3 GDB13 GDB23 GDB13 GDB23 GDB23 GDB13 GDB23 GDB28 GDB23 GDB28 GDB33 GDB23 GDB33 GDB38 GDB28 GDB38 GDB33 GDB38

Telephone: +44 (0) 1772 323529 Telephone: +44 (0) 1772 323529 Telephone: +44 (0) 1772 323529

Fax: +44 (0) 1772 314664

Fax: +44 (0) 1772 31 Fax: +44 (0) 1772 31 Fax: +44 (0) 1772 31

299