13 3 mento hoses and couplings 30 09 2015 balflex hydraulic hoses r13 pur low

Mento Hoses and Couplings Catalogue

13.3. Balflex Hydraulic Hoses / R13 PUR

Balflex Hydraulic Hoses / R13 PUR • • • • • • • • •

13.3

Balflex® DIN EN 853 1SN / SAE 100R1AT Balflex® DIN EN 853 2SN / SAE 100R2AT Balflex® BALMASTER EN 856 4SP Balflex® BALMASTER EN 856 R12 / SAE 100R12 Balflex® POWERSPIR EN 856 4SH Balflex® POWERSPIR SAE 100R13 TrAle® Hot water superservice 2SC blue hose R13 PUR ORANGE Fig.1502 Hammer Lug Composite Type Swage Insert

13.3-1 13.3-2 13.3-3 13.3-4 13.3-5

4. EDITION

Mento Hoses and Couplings Catalogue

13.3-1. Balflex Hydraulic Hoses / R13 PUR

Balflex® DIN EN 853 1SN / SAE 100R1AT

According to  ISODIN 1436 / DIN 853 type 1SN / /SAE J517 type SAE 100R1 AT Balflex ENEN853 1SN SAE 100R1AT High pressure, single steel braid reinforced hydraulic hose Balflex® DIN EN 853 1SN / SAE 100R1AT – 10.1002.

According to ISO 1436 / DIN EN 853 type 1SN / SAE J517 type SAE 100R1 AT

High pressure, single steel braid reinforced hydraulic hose

Inner tube: Reinforcement: Outer tube: Safety factor: Application: Temperature range:

seamless oil resistant synthetic rubber 1 high tensile steel wire braid black, oil, weather and abrasion resistant synthetic rubber 4: 1 petroleum base hydraulic fluids - 40ºC (- 40ºF) + 100ºC (+ 212ºF); Intermittent service: + 120ºC (+ 248ºF) Max. temperature recommended for water base hydraulic fluids: + 70ºC (+ 158ºF) Max. temperature recommended for air: + 60ºC (+ 140ºF) ® Couplings: Balflex crimped fittings 23 serie with ferrules 20 serie. Multicrimp P23 serie

part number

Ø nom.

dash size

10.1002.03 10.1002.04 10.1002.05 10.1002.06 10.1002.08 10.1002.10 10.1002.12 10.1002.16 10.1002.20 10.1002.24 10.1002.32 10.1002.40 10.1002.48

3/16” 1/4" 5/16” 3/8” 1/2" 5/8” 3/4" 1” 1.1/4” 1.1/2” 2” 2.1/2” 3“

-3 -4 -5 -6 -8 - 10 - 12 - 16 - 20 - 24 - 32 - 40 - 48

Ø internal mm 4,8 6,3 8,0 9,5 12,7 16,0 19,0 25,4 32,0 38,0 50,8 63,5 76,2

inch 0.19 0.25 0.31 0.38 0.50 0.63 0.75 1.00 1.25 1.50 2.00 2.50 3.00

Ø external mm 11,8 13,4 15,0 17,4 20,7 23,8 27,8 35,9 43,8 51,1 64,5 79,0 92,0

inch 0.47 0.53 0.59 0.69 0.81 0.93 1.09 1.40 1.71 1.99 2.52 3.11 3.62

working pressure MPa 25.0 22.5 21.5 18.0 16.0 13.0 10.5 8.8 6.3 5.0 4.0 5.0 3.5

min. burst pressure

PSI MPa 3625 100.0 3260 90.0 3115 85.0 2610 72.0 2320 64.0 1885 52.0 1520 42.0 1275 35.0 25.0 910 20.0 725 16.0 580 20.0 725 14.0 508

PSI 14500 13040 12460 10440 9280 7540 6080 5100 3640 2900 2320 2900 2030

min. bend radius mm 89 100 114 127 178 200 240 300 419 500 630 760 900

inch 3.5 3.9 4.5 5.0 7.0 7.9 9.4 11.8 16.5 19.7 24.8 30.4 36.0

weight kg/m 0,23 0,26 0,30 0,36 0,46 0,56 0,74 1,06 1,36 1,65 2,05 2,89 3,43

Note: Sizes - 40 (2.1/2”) and - 48 (3”) not included in the standards. ®

Balflex hydraulic hose DIN EN 853 1SN / SAE 100R1AT has a very superior working and burst pressure compared with only SAE 100R1AT COVER: U.S. MSHA APPROVED

Construction characteristics and dimensions may be changed at any time without prior notice.

The data contained herein is information purposes only and does not enlarge, amend or imply any warranty other than provided by the manufacturer with the product. Any use of the product not in conformance with the manufacturer’s instructions may be dangerous.

Only items in this catalogue are carried in stock. Some items are subjected to minimum quantities or sold only in multiples of standard quantities. Please refer to the price list or contact our commercial department.

Balflex® – The European Technology  Balflex 2010

(I) HYDR-2010 -

35

1

Mento Hoses and Couplings Catalogue

13.3-2. Balflex Hydraulic Hoses / R13 PUR

Balflex® DIN EN 853 2SN / SAE 100R2AT According to ISO 1436/ DIN EN 853 type853 2SN / 2SN SAE J517/ type SAE 100R2 AT Balflex DIN EN SAE 100R2AT High pressure, double steel braid reinforced hydraulic hose Balflex® DIN EN 853 2SN / SAE 100R2AT – 10.1004.

According to ISO 1436 / DIN EN 853 type 2SN / SAE J517 type SAE 100R2 AT

High pressure, double steel braid reinforced hydraulic hose

Inner tube: Reinforcement: Outer tube: Safety factor: Application: Temperature range:

seamless oil resistant synthetic rubber 2 high tensile steel wire braids black, oil, weather and abrasion resistant synthetic rubber 4: 1 petroleum base hydraulic fluids - 40ºC (- 40ºF) + 100ºC (+ 212ºF); Intermittent service: + 120ºC (+ 248ºF) Max. temperature recommended for water base hydraulic fluids: + 70ºC (+ 158ºF) Max. temperature recommended for air: + 60ºC (+ 140ºF) ® Couplings: Balflex crimped fittings 23 serie with ferrules 20 serie. Multicrimp P23 serie

part number

Ø nom.

dash size

10.1004.03 10.1004.04 10.1004.05 10.1004.06 10.1004.08 10.1004.10 10.1004.12 10.1004.16 10.1004.20 10.1004.24 10.1004.32 10.1004.40 10.1004.48

3/16” 1/4" 5/16” 3/8” 1/2" 5/8” 3/4" 1” 1.1/4” 1.1/2” 2” 2.1/2” 3“

-3 -4 -5 -6 -8 - 10 - 12 - 16 - 20 - 24 - 32 - 40 - 48

Ø internal mm 4,8 6,3 8,0 9,5 12,7 16,0 19,0 25,4 32,0 38,0 50,8 63,5 76,2

inch 0.19 0.25 0.31 0.38 0.50 0.63 0.75 1.00 1.25 1.50 2.00 2.50 3.00

Ø external mm 13,4 15,0 16,6 19,0 22,2 25,5 29,4 37,9 48,5 54,7 67,4 83,0 96,0

inch 0.53 0.59 0.65 0.75 0.87 1.00 1.15 1.50 1.90 2.15 2.65 3.27 3.78

working pressure MPa 41.5 40.0 35.0 33.0 27.5 25.0 21.5 16.5 12.5 9.0 8.0 7.0 5.5

PSI 6015 5800 5075 4785 3985 3625 3120 2390 1810 1300 1160 1015 798

min. burst pressure MPa 165.0 160.0 140.0 132.0 110.0 100.0 86.0 65.0 50.0 36.0 32.0 28.0 22.0

PSI 24060 23200 20300 19140 15940 14500 12480 9560 7240 5200 4640 4060 3192

min. bend radius mm 89 100 114 127 178 200 240 300 419 500 630 760 900

weight

inch 3.5 3.9 4.5 5.0 7.0 7.9 9.4 11.8 16.5 19.7 24.8 30.4 36.0

kg/m 0,32 0,38 0,45 0,53 0,65 0,76 1,00 1,48 2,14 2,55 3,30 3,96 4,96

Note: Size - 48 (3”) not included in the standards. ®

Balflex hydraulic hose DIN EN 853 2SN / SAE 100R2AT has a very superior working and burst pressure compared with only SAE 100R2AT COVER: U.S. MSHA APPROVED

Construction characteristics and dimensions may be changed at any time without prior notice.

The data contained herein is information purposes only and does not enlarge, amend or imply any warranty other than provided by the manufacturer with the product. Any use of the product not in conformance with the manufacturer’s instructions may be dangerous.

Only items in this catalogue are carried in stock. Some items are subjected to minimum quantities or sold only in multiples of standard quantities. Please refer to the price list or contact our commercial department.

(I) HYDR-2010 -

36

Balflex® – The European Technology  Balflex 2010

2

Balflex BALMASTER DIN Mento ENHoses 856 4SPCatalogue and Couplings  13.3-3.

Hydraulic / R13 PUR  ® Balflex BALMASTER EN Balflex 856 4SP Balflex BALMASTER DIN ENHoses 856 4SP Balflex BALMASTER EN 856 4SP –DIN 10.1008.

3

According to ® ISO 3862 / EN 856 type 4SP

Balflex

BALMASTER EN 856 4SP – EN ® Balflex® BALMASTER 856 4SP – 10.1008.

BALMASTER EN 85610.1008.

4SP

Balflex

Very hightopressure, four wire spirals reinforced hydraulic hose According ISO 3862 / EN 856steel type 4SP According to ISO 3862 / EN 856 type 4SP

According to ISO 3862 / EN 856 type 4SP Very high pressure, four steel wire spirals reinforced hydraulic hose hydraulic hose Veryfour high pressure, four steel wire spirals reinforced Very high pressure, steel wire spirals reinforced hydraulic hose Inner tube: Reinforcement: Outer tube: Inner tube: Safety factor: Reinforcement: Application: Outer tube: Temperature range: Safety factor: Application: Temperature range: Couplings: part number part 10.1008.04 number 10.1008.06 10.1008.08 10.1008.10 10.1008.04 10.1008.12 10.1008.06 10.1008.16 10.1008.08 10.1008.20 10.1008.10 10.1008.24 10.1008.12 10.1008.32 10.1008.16 10.1008.20 10.1008.24 10.1008.32

seamless oil resistant synthetic rubber 4 spirals of high tensile steel wire black, oil, weather and abrasion resistant synthetic rubber oil resistant 4:seamless 1 Inner tube: synthetic seamlessrubber oil resistant synthetic rubber 4 spirals of high tensile wire petroleum base hydraulic fluids Reinforcement: 4steel spirals of high tensile steel wire oil, weather and black, abrasion synthetic rubber - black, 40ºC (40ºF) +tube: 100ºC (+ 212ºF); Intermittent service: +resistant 120ºC (+ 248ºF) rubber Outer oil, resistant weather and abrasion synthetic 4: 1 temperature Max. recommended for water base hydraulic fluids: + 70ºC (+ 158ºF) Safety factor: 4: 1 petroleum base hydraulic fluids for Max. temperature recommended air:hydraulic + 60ºC (+fluids 140ºF) Application: petroleum base - 40ºC ®(-crimped 40ºF)range: +fittings 100ºC (+ 212ºF); Intermittent service: + 120ºC (+ 248ºF) Balflex with ferrules Temperature - series 40ºC (-24 40ºF) + 100ºC20 (+ serie 212ºF); Intermittent service: + 120ºC (+ 248ºF) Max. temperature recommended for waterrecommended base hydraulic 70ºChydraulic (+ 158ºF)fluids: + 70ºC (+ 158ºF) Max. temperature forfluids: water+base Max. temperature recommended for air: +recommended 60ºC (+ 140ºF) Max. temperature for air: + 60ºC (+ 140ºF) dash ® crimped fittings series® 24 with ferrules working20 serie min. burst min. bend Couplings: Balflex Couplings: Balflex crimped fittings series 24 with ferrules 20 serie Ø nom. Ø internal Ø external weight size pressure pressure radius dash part -size 4 number -6 -8 - 10 -4 10.1008.04 - 12 -6 10.1008.06 - 16 -8 10.1008.08 - -20 10 10.1008.10 - -24 12 10.1008.12 - -32 16 10.1008.16 1.1/4” 10.1008.20 - 20 1.1/2” 10.1008.24 - 24 2” - 32 10.1008.32

Ø1/4" nom.

3/8” 1/2" 5/8” 1/4" 3/4" 3/8” 1” 1/2" 1.1/4” 5/8” 1.1/2” 3/4" 2” 1”

mm inch ØØinternal 6,6 0.26 nom.

9,5 0.38 12,7 mm 0.50 inch 16,0 6,6 1/4"0.63 0.26 19,0 9,53/8”0.75 0.38 25,4 12,71/2"1.00 0.50 32,0 16,05/8”1.25 0.63 38,0 1.50 19,03/4" 0.75 50,8 2.00 25,4 1” 1.00 32,0 1.1/4”1.25 38,0 1.1/2”1.50 50,8 2” 2.00

mm inch MPa PSI MPa PSI mm inch kg/m working min. burst min. bend dash working min. burst Ø external weight 17,9 50.0 200.0 120radius 0.70 7250 29000 4.7 0,70 pressure pressure Ø internal Ø external size pressure pressure 21,4 44.5 6453 178.0 25812 130 0.84 5.1 0,80 24,6 41.5 6018 166.0 24072 180 7.1 1,15 mm 0.97 inch mm MPa inch kg/m mm MPa inch PSI mm MPa inch PSI MPa PSI PSI 28,2 35.0 140.0 225 1.11 5075 20300 8.9 1,26 17,9 50.0 200.0 120 0.70 7250 29000 4.7 0,70 6,6 35.0 17,9 140.0 50.0 7250 200.0 -4 0.26 5075 0.70 20300 29000 32,2 280 1.27 11.0 1,44 21,4 44.5 178.0 130 178.0 0.84 6453 25812 5.1 0,80 9,5 21,4 44.5 6 0.38 0.84 6453 25812 39,7 28.0 112.0 355 1.56 4060 16240 14.0 2,15 24,6 41.5 166.0 180 166.0 0.97 6018 24072 7.1 1,15 12,7 24,6 41.5 8 0.50 0.97 6018 24072 50,8 21.0 84.0 460 2.00 3045 12180 18.1 2,75 35.0 140.0 225 140.0 1.11 5075 20300 8.9 1,26 16,0 18.5 28,2 74.0 35.0 5075 -28,2 10 0.63 2683 1.11 10732 20300 57,2 560 2.25 22.0 3,35 35.0 140.0 280 140.0 1.27 5075 20300 11.0 20300 1,44 19,0 16.5 32,2 66.0 35.0 5075 -32,2 12 0.75 2393 1.27 9572 69,8 710 2.75 28.0 4,60 355 112.0 1.56 14.0 16240 2,15 25,4 28.0 39,7 112.0 28.0 4060 -39,7 16 1.00 4060 1.56 16240 460 84.0 2.00 18.1 12180 2,75 32,0 21.0 50,8 84.0 21.0 3045 -50,8 20 1.25 3045 2.00 12180 560 74.0 2.25 22.0 10732 3,35 38,0 18.5 57,2 74.0 18.5 2683 -57,2 24 1.50 2683 2.25 10732 710 66.0 2.75 28.0 4,60 50,8 16.5 69,8 66.0 16.5 2393 -69,8 32 2.00 2393 2.75 9572 9572

min. bend radius mm 120 130 180 225 280 355 460 560 710

inch 4.7 5.1 7.1 8.9 11.0 14.0 18.1 22.0 28.0

weight kg/m 0,70 0,80 1,15 1,26 1,44 2,15 2,75 3,35 4,60

Balflex BALMASTER SAE 100R12  Balflex Balflex BALMASTER SAE 100R12 BALMASTER SAE 100R12

Balflex® BALMASTER EN 856 R12 / SAE 100R12 – 10.1012. ®3862 According / EN 856®type R12 / SAE J517/ type 100R12 Balflexto® ISO BALMASTER EN 856 R12 SAE 100R12 10.1012.

Balflex BALMASTER ENSAE 856 R12 / –SAE 100R12 – 10.1012.

COVER: U.S. MSHA APPROVED

Balflex BALMASTER EN 856 R12 / SAE 100R12 COVER: U.S. MSHA APPROVED COVER: U.S. MSHA APPROVED

According to ISO 3862 / EN 856 type / /SAE J517 type SAE 100R12 According towire ISO R12 3862 ENreinforced 856 type R12 / SAE J517 hose type SAE 100R12 High pressure, four steel spirals hydraulic

According to ISO 3862 / EN 856 type R12 / SAE J517 type SAE 100R12 Highpressure, pressure,four four steel wire spirals reinforced hydraulic hose Highsteel pressure, four steel wire spirals reinforced High wire spirals reinforced hydraulic hosehydraulic hose

Inner tube: seamless oil resistant synthetic rubber Reinforcement: 4 spirals of high tensile steel wire Outer oil, Inner weather and abrasion synthetic rubber Innertube: tube: black, seamless oil resistant synthetic rubber tube: seamlessresistant oil resistant synthetic rubber Safety factor: 4:4 1spirals Reinforcement: of high tensile4 steel wire Reinforcement: spirals of high tensile steel wire Application: base hydraulic fluids Outer tube: petroleum black, oil, weather andblack, abrasion resistantand synthetic rubber Outer tube: oil, weather abrasion resistant synthetic rubber Temperature range: - 4: 40ºC 40ºF)factor: + 100ºC4:(+1 212ºF); Intermittent service: + 120ºC (+ 248ºF) factor:and 1 (Safety ConstructionSafety characteristics dimensions may be changed at any time without prior notice. temperature recommended water base hydraulic fluids: + 70ºC (+ 158ºF) Application: Max. petroleum base hydraulic fluids for Application: petroleum base hydraulic fluids The data contained herein is information purposes only recommended and does not enlarge, amend or imply any warranty other than provided by the manufacturer Max. temperature for Intermittent air: +100ºC 60ºC (+ 140ºF) Temperature range: 40ºC (40ºF) + 100ºC (+ 212ºF); service: + 120ºC (+ 248ºF) Temperature range: 40ºC (40ºF) + (+ 212ºF); Intermittent service: + 120ºC (+ 248ºF) with the product. Any use of the product not®in conformance with the manufacturer’s instructions may be dangerous.

Couplings: Balflex crimped fittings 23 or 24 series with ferrules 20 serie Max. temperature forwithout water base hydraulic 70ºChydraulic (+ 158ºF) Max. recommended forfluids: water +base fluids: + 70ºC (+ 158ºF) Construction characteristics and dimensions may be recommended changed attemperature any time prior notice.

Construction characteristics andsubjected dimensions may be changed any without prior Only items in this catalogue are carried stock.

Some items are to for minimum quantities or140ºF) soldtime only in multiples of notice. standard quantities. Please Max.in temperature recommended air: + 60ºC (+at Max. temperature recommended for air: + 60ºC (+ 140ºF) refer the contained price list orherein contact commercial ® department.

The to data is our information purposes only and does not enlarge, amend or imply any warranty other than provided by the manufacturer ® The Balflex data contained herein fittings is information onlyfittings and does not amend or ferrules imply any 20 warranty Couplings: crimped 23 orpurposes 24 series with ferrules 20dangerous. serie Couplings: Balflex crimped 23may orenlarge, 24 series with serieother than provided by the manufacturer with the product. Any use of the product not in conformance with the manufacturer’s instructions be part dash working min. burst min. with the product. Any use of the product not in conformance with the manufacturer’s instructions maybend be dangerous. Ø nom. internal Ø external weight number sizein stock.ØSome pressure radius quantities.

Only items in this catalogue are carried items are subjected to minimum quantities or soldpressure only in multiples of standard Please Only items in this catalogue are carried in stock. Some items are subjected to minimum quantities or sold only in multiples of standard quantities. Please refer to the price list or contact our commercial department. part working min. burst dash workingmin. bend min. burst min. bend referpart todash the price list or contact our commercial department. ®

mm inch mm inch MPa PSI MPapressure PSI mm inch kg/m Ø nom. number Ø Ø external weight – Thesize European Technology Ø internal nom. Ø internal Ø external weight number sizeBalflex pressure pressure radiuspressure radius 10.1012.06 3/8” 9,5 20,3 27.6 4000 110.0 16000 125 6 0.38 0.80 5.0 0,80  Balflex 2010 (I) HYDR-2010 - 53 10.1012.08 1/2" 12,7 -8 7.0 1,15 mm 0.50 inch 23,6 mm 0.93 inch MPa PSI MPa PSI mm MPa inch kg/m mm inch mm 27.6 inch 4000 mm 110.0 inch 16000 MPa 180 PSI PSI kg/m ® 10.1012.10 5/8” 16,0 27,4 27.6 110.0 205 10 0.63 1.08 4000 16000 8.0 1,26 ® – The-20,3 Technology 10.1012.06 3/8” 10.1012.06 9,53/8” 0.38 27.6 110.0 125 110.0 - 6 Balflex 0.80 4000 5.0 16000 0,80 125 9,5 20,3 27.6Technology 6European 0.38 0.80 16000 4000 5.0 0,80 Balflex – The European 10.1012.12 3/4" 19,0 30,7 27.6 110.0 240 12 0.75 1.21 4000 16000 9.5 1,44 10.1012.08 1/2" 10.1012.08 12,7 27.6 180 -8 0.93 7.0 16000 1,15 1/2" 0.50 12,7 23,6 110.0 27.6 4000 110.0 180 -23,6 8 0.50 4000 0.93 16000 7.0 1,15  Balflex 2010 (I) HYDR-2010 53 10.1012.16 1” 25,4 38,1 27.6 110.0 305 16 1.00 1.50 4000 16000 12.0 2,15 Balflex (I) HYDR-2010 - 53 10.1012.10 5/8”  27.6 205 110.0 - 102010 16,0 1.08 8.0 16000 1,26 205 10.1012.10 5/8” 0.63 -27,4 16,0 27,4 110.0 27.6 4000 10 0.63 4000 1.08 16000 8.0 1,26 10.1012.20 1.1/4” 32,0 47,0 20.7 420 - -20 1.25 1.85 3000 82.7 12000 16.5 2,75 10.1012.12 3/4" 10.1012.12 19,0 27.6 240 110.0 12 1.21 9.5 16000 1,44 240 3/4" 0.75 -30,7 19,0 30,7 110.0 27.6 4000 12 0.75 4000 1.21 16000 9.5 1,44 10.1012.24 1.1/2” 38,0 53,6 17.2 510 - -24 2.11 2500 69.0 10000 20.0 3,35 10.1012.16 1” 10.1012.16 25,41” 1.50 27.6 305 110.0 16 1.00 -38,1 1.50 12.0 16000 2,15 305 25,4 38,1 110.0 27.6 4000 16 1.00 4000 1.50 16000 12.0 2,15 10.1012.32 2” 50,8 66,8 17.2 635 - -32 2.00 2.63 2500 69.0 10000 25.0 4,60 10.1012.20 1.1/4” 32,0 20.7 420 82.7 20 1.85 16.5 12000 2,75 420 10.1012.20 1.1/4”1.25 -47,0 32,0 47,0 82.7 20.7 3000 20 1.25 3000 1.85 12000 16.5 2,75 10.1012.24 1.1/2” 10.1012.24 38,0 17.2 510 69.0 - 24 2.11 20.0 10000 3,35 510 1.1/2”1.50 -53,6 38,0 53,6 69.0 17.2 2500 24 1.50 2500 2.11 10000 20.0 3,35 10.1012.32 2” 10.1012.32 50,82” 2.00 -66,8 17.2 635 69.0 - 32 2.63 25.0 10000 4,60 635 50,8 66,8 69.0 17.2 2500 32 2.00 2500 2.63 10000 25.0 4,60 COVER: U.S. MSHA APPROVED COVER: U.S. MSHA APPROVED COVER: U.S. MSHA APPROVED

According to ISO 3862 / EN 856 type 4SH

Mentohydraulic Hoses and Couplings Very high pressure, four steel wire spirals reinforced hose Catalogue

 13.3-4.DIN Balflex EN Hoses 4SH / R13 PUR Balflex BalflexPOWERSPIR POWERSPIR DINHydraulic EN856 856 4SH

® Balflex EN 4SH – –10.1009. ® Balflex®POWERSPIR POWERSPIR EN856 856 4SH 10.1009.

POWERSPIR EN 856 4SH

Balflex

According to to ISO 3862 / EN 856 type 4SH According ISO / EN 856 type 4SH Inner tube:3862 seamless oil resistant synthetic rubber

Reinforcement: 4 spirals of very high tensile steel wire According to ISO 3862 / EN 856 type 4SH Very high pressure, four steel wire spirals reinforced hydraulic hose Outer tube: black, oil, weather and abrasion resistant synthetic rubber Very high pressure, four steel wire spirals reinforced hydraulic hose Very high pressure, Safety factor: 4: 1four steel wire spirals reinforced hydraulic hose

Application: petroleum base hydraulic fluids Temperature range: - 40ºC (- 40ºF) + 100ºC (+ 212ºF); Intermittent service: + 120ºC (+ 248ºF) Max. temperature recommended for water base hydraulic fluids: + 70ºC (+ 158ºF) Max. temperature recommended for air: + 60ºC (+ 140ºF) ® Couplings: Balflex crimped fittings series 26 with ferrules 20.406. (3/4” and 1”) and 20.405. (1.1/4”, 1.1/2” and 2”) series Inner tube: oil oil resistant synthetic rubber Inner tube:seamless seamless resistant synthetic rubber Reinforcement: of very high tensile steel wire Reinforcement:4 spirals 4 spirals of very high tensile steel wire part dash oil, weather and abrasion resistantworking min. burst min. bend Outer tube: black, synthetic rubber Outer black, oil,Ø weather abrasion synthetic rubber Ø nom.tube: size internal and Ø externalresistant weight number Safety pressure pressure radius factor: 4: 1 Safety factor: 4: 1 Application: base hydraulic fluids Application:petroleum petroleum hydraulic fluids mmbase mm inchIntermittent MPa PSI MPa PSI(+ 248ºF) mm inch kg/m Temperature range: - 40ºC (- 40ºF) + inch 100ºC (+ 212ºF); service: + 120ºC Temperature range: 40ºC (40ºF) + 100ºC (+ 212ºF); Intermittent service: + 120ºC (+ 280 248ºF)11.0 10.1009.12 3/4" 19,0 32,2 42.0 168.0 12 0.75 1.27 6090 24360 1,56 Max. temperature recommended forfor water base hydraulic fluids: + 70ºC (+ 158ºF) temperature recommended water base hydraulic fluids: + 70ºC 158ºF) 2,09 10.1009.16 1” 25,4 38,7 38.0 152.0 22040 340 (+13.4 -Max. 16 temperature 1.00 1.52 5510 Max. recommended for air: + 60ºC (+ 140ºF) air: + 60ºC 140ºF) 18852 10.1009.20 1.1/4” 32,0 45,5 460 -Max. 20 ®temperature 1.25recommended 1.79for 32.5 4713 (+130.0 18.1 2,57 ® Couplings: Balflex crimped fittings53,5 series 26 with ferrules 20.406.

(3/4” andand 1”) and 20.405. 3,44 (1.1/4”, 10.1009.24 1.1/2” 38,0 29.0 ferrules 560 -Balflex 24 1.50fittings 2.1126 with 4205 116.0 16820 22.020.405. crimped series 20.406.

(3/4” 1”) and (1.1/4”, Couplings: 1.1/2” and 2”) series 10.1009.32 2” 50,8 2”) 2.00 25.0 3625 100.0 14500 700 -1.1/2” 32 2.68 27.6 4,90 and series 68,1 ®

Balflex POWERSPIR SAE 100R13 Balflex

POWERSPIR SAE 100R13 – 5000PSI – 10.1009. * - 10.1014. ®

DIN EN 856 100R13 hoses * Onpart sizes – 12 (3/4”) anddash – 16 (1”) the Balflex POWERSPIR working min.4SH burstand SAE min. bend part dash Ø internal working min. burst min. bend weight ® external Ø nom. Ø size pressure pressure radius POWERSPIR DIN EN 856 4SH SAE 100R13 and arenumber the same.

The working pressure of Balflex According to ISO 3862 / EN 856 type R13 / SAE J517 type R13 Ø nom. Ø internal Ø external number size pressure pressure radius 3/4" weight ® Balflex POWERSPIR DIN EN 856 4SH SAE 100R13 1” are higher than standard SAE 100R13. mm

inch

mm

inch

MPa

PSI

MPa

PSI

mm

inch

mm steel inch wire mm inch MPa PSI MPa PSI mm inch Very high pressure, four six reinforced hose ®19,0 10.1009.12 3/4" 32,2 spirals 42.0 280 - 12 or 0.75 1.27 6090 168.0 hydraulic 24360 11.0

3/4"the Balflex 19,0 32,2 42.0 168.0 24360 280100R15 - 12 0.75 1.27 11.0 POWERSPIR DIN 1.52 EN 856 4SH, 6090 SAE 100R13 and SAE * 10.1009.16 On10.1009.12 size – 12 (3/4”) 1” 25,4 38,7 38.0 5510 152.0 22040 340 - 16 1.00 13.4 10.1009.16 1” 25,4 38,7 38.0 5510 152.0 22040 340 - 16 1.00 1.52 13.4 are the same 10.1009.20 1.1/4” 32,0 45,5 32.5 4713 130.0 18852 460 - 20 1.25 1.79 18.1 10.1009.20 10.1009.24 10.1009.24 10.1009.32 10.1009.32

1.1/4” 1.1/2” 1.1/2” 2” 2”

32,0 45,5 32.5 4713 130.0 18852 460 - 20 1.25 1.79 18.1 38,0 53,5 29.0 4205 116.0 16820 560 - 24 1.50 2.11 22.0 38,0 53,5 29.0 4205 116.0 16820 560 - 24 1.50 2.11 22.0 50,8 68,1 25.0 3625 100.0 14500 700 - 32 2.00 2.68 27.6 50,8 68,1 25.0 3625 100.0 14500 700 - 32 2.00 2.68 27.6

kg/m kg/m

1,56 1,56 hoses 2,09 2,09 2,57 2,57 3,44 3,44 4,90 4,90

Balflex POWERSPIR SAE 100R13  DIN ENEN 856 4SH and SAE 100R13 hoses * On sizes – 12 (3/4”) and – 16 (1”)(1”) thethe Balflex Balflex POWERSPIR SAE Balflex POWERSPIR SAE100R13 100R13 POWERSPIR DIN 856 4SH and SAE 100R13 hoses * On sizes – 12 (3/4”) and – 16 Balflex POWERSPIR are the same.

The working pressure of Balflex POWERSPIR DIN EN 856 4SH SAE 100R13 3/4" and ®

COVER: U.S. MSHA APPROVED

®

®

®

®

POWERSPIR DIN EN 856 4SH* SAE 100R13 3/4" and are the same.

The working of100R13 Balflex rubber tube: seamlesspressure oil SAE resistant synthetic ® Inner Balflex POWERSPIR – 1” 5000PSI –than 10.1009.

- 10.1014. ® POWERSPIR DIN ENEN 856 4SH SAE 100R13 areare higher standard SAE 100R13.

Balflex POWERSPIR DIN 856 4SH SAE 100R13 1” higher than standard SAE 100R13.

Balflex Reinforcement: 4 or 6 spirals of high tensile steel wire ®® Balflex POWERSPIR SAE 100R13 –type – –10.1009.

Outer tube: and resistant synthetic rubber According to ISO 3862black, / EN oil, 856weather type R13 / abrasion SAE J517 R13 Balflex POWERSPIR SAE 100R13 –5000PSI 5000PSI 10.1009.* -* 10.1014.

- 10.1014. ® * On size – 12 ® (3/4”) the Balflex ®POWERSPIR DIN EN 856 4SH, SAE 100R13 and SAE 100R15 hoses

Balflex

POWERSPIR SAE 100R13

Safety factor: 1 Balflex POWERSPIR DIN EN 856 4SH, SAE 100R13 and SAE 100R15 hoses * On size – 12 (3/4”)4:the are thethe same According to to ISO 3862 / EN 856 typehydraulic R13 / SAE J517 type R13 Application: petroleum base According ISO 3862 EN 856 / fluids SAE type R13 are same Very high pressure, /four or type six R13 steel wireJ517 spirals reinforced hydraulic hose

Temperature range: - 40ºC (- 40ºF) + 100ºC (+ 212ºF); Intermittent service: + 120ºC (+ 248ºF) According to ISO 3862 / EN 856 type R13 /for SAE J517 type R13 Max.four temperature recommended water base hydraulic fluids: + 70ºC (+ hose 158ºF) Very high pressure, oror six steel wire spirals reinforced hydraulic Very high pressure, four six steel wire spirals reinforced hydraulic hose Max. temperature recommended for air: + 60ºC (+ 140ºF) Very high pressure, four® or six steel wire spirals reinforced hydraulic hose COVER: U.S. MSHA APPROVED COVER: U.S. MSHA APPROVED Couplings: Balflex crimped fittings series 26 with ferrules 20.406 serie Construction characteristics and dash dimensions may be changed at any time without prior notice. part working

Ø nom.

Ø internal

Ø external

min. burst

min. bend

weight

number size purposes only and does not enlarge, amend pressure pressure radius The data contained herein is information or imply any warranty other than provided by the manufacturer seamless oil resistant synthetic rubber instructions may be dangerous. with the product. Inner Any usetube: of the product not in conformance with the manufacturer’s

Reinforcement: 4 or 6 spirals wire MPa PSI MPa mmof high inchtensile mmsteelinch PSI mm inch kg/m Only items in thisInner catalogue are carried in stock.oil Some items are subjectedrubber to minimum quantities or sold only in multiples of standard quantities. Please tube: seamless resistant synthetic Inner tube: Outer tube: seamless oil resistant synthetic rubber black, oil, weather and abrasion resistant synthetic 10.1009.12 * 3/4" 19,0 32,2 42.0 168.0 24360 280 12 0.75 1.27 6090 rubber 11.0 1,56 refer to the price list or contact our commercial department.

Reinforcement: 4 or 6 spirals high tensile wire or 6 spirals high tensile steel wire38.0 5510 152.0 22040 Safety factor: 4: 116 10.1009.16 *Reinforcement: 1” 25,4of of 38,7steel 340 -4 1.00 1.52 13.4 2,09 Outer tube: weather and abrasion resistant synthetic 10.1014.20 Application: 1.1/4” 32,0 49,8 34.5 138.0 420 Outer tube:black, -black, 20 oil,oil, 1.25 5000 rubber 16.5 3,90 weather and abrasion resistant synthetic rubber 20000 petroleum base hydraulic fluids 1.96 Safety factor: 1241 (- 40ºF) 10.1014.24 1.1/2” 38,0 + 1.50 57,4 34.5 5000 138.0 500 -4: 2.26Intermittent 20000 20.0 4,96 Safety factor:-4:40ºC Temperature range: 100ºC (+ 212ºF); service: + 120ºC (+ 248ºF) ®2.00 10.1014.32 Application: 2” 50,8 71,1 34.5base 138.0 fluids: 635(+ 158ºF) -petroleum 32 temperature 2.80 5000 20000 25.0 7,09 petroleum base hydraulic fluids Application: Max. recommended for water hydraulic + 70ºC base hydraulic fluids

Balflex – The European Technology

Temperature range: - 40ºC (- 40ºF) + 100ºC (+ (+ 212ºF); + 120ºC (+ (+ 248ºF) Temperature range:Max. temperature recommended forIntermittent air: + 60ºCservice: (+service: 140ºF) - 40ºC (- 40ºF) + 100ºC 212ºF); Intermittent + 120ºC ® 248ºF)  Balflex 2010 (I) HYDR-2010 - 54 Note: According to ISOand 3862 / ®temperature EN 856 type R13 SAE J517 type R13, thefluids: Balflex POWERSPIR Max. temperature recommended for water base hydraulic + 70ºC (+ (+ 158ºF) Construction characteristics dimensions may be changed at /any time without prior notice.

Max. recommended for water base hydraulic fluids: + 70ºC 158ºF) SAE Couplings: crimped series 26 with ferrules 20.406 Construction characteristicsBalflex and dimensions mayfittings be changed at any time without prior notice.serie Max. temperature recommended forfor air: + 60ºC (+ 140ºF) 100R13 hose is of 4 steel wire spirals on sizes – 12 (3/4”) and – 16 (1”) and of 6 steel wire spirals on sizes Max. temperature recommended air: + 60ºC (+ 140ºF) The data contained herein is information purposes only and does not enlarge, amend or imply any warranty other than provided by the manufacturer ® ® data contained herein is Balflex information purposes only and series does not26 enlarge, amend or 20.406 imply anyserie warranty crimped fittings with ferrules –with 20The (1.1/4”), –Couplings: 24 and – 32 (2”).

Balflex crimped fittings series 26 with ferrules 20.406 serie other than provided by the manufacturer the product.Couplings: Any use of(1.1/2”) the product not in conformance with the manufacturer’s instructions may be dangerous. with the product. Any use of the product instructions maymin. be dangerous. part dash not in conformance with the manufacturer’sworking burst min. bend Only items in this catalogue in stock. Ø Some items are subjected to minimum quantities or sold pressure only in multiples of standard quantities.

Please Ø nom.are carried internal Ø external weight number size pressure radius ® subjected to minimum Only items in this catalogue are carried in stock. Some items are quantities or sold only in multiples of standard quantities. Please tosizes the price contact and our commercial department.

DIN EN 856 4SH and SAE 100R13 hoses *refer On – list 12or(3/4”) –commercial 16 (1”) the Balflex POWERSPIR part dash working min. burst min. bend refer to the price list or contact our department. part dash working min. burst min. bend ®

nom. Ø internal Ø external weight DIN 856 4SH 100R13 and arenumber the same. Ø The workingsize pressure Balflexmm Ø nom. internal ØPOWERSPIR external weight pressure pressure radius inch inch MPa PSI ENMPa PSI SAEmm inch 3/4" kg/m number size mmØof pressure pressure radius ® POWERSPIR DIN EN 856 4SH SAE 100R13 1” are higher than standard SAE 100R13.

Balflex 10.1009.12 * 3/4" 19,0 32,2 42.0 6090 168.0 24360 280 - 12 0.75 1.27 11.0 1,56

mm mm PSIPSI 152.0 MPa PSIPSI 10.1009.16 * 1” 25,4 38.0 mm ®inch inch 38,7 mm inch inch MPa MPa5510 MPa 22040 - 16 1.00 1.52 ® The European Technology Balflex – 10.1014.20 1.1/4” 32,0 49,8 34.5 138.0 10.1009.12 * 3/4" 19,0 32,2 42.0 168.0 20 1.25 1.96 5000 20000 12 0.75 1.27 6090 24360 Balflex – The European Technology 10.1009.12 * 3/4" 19,0 32,2 42.0 6090 168.0 24360 - 12 0.75 1.27 10.1014.24 - 24 10.1009.16 * * - 1.1/2” 1” 1” 25,4 38,7 38.0 152.0 16 1.00 1.52 5510 22040 (I) HYDR-2010 54 10.1009.16 25,4 1.50 38,7 2.26 38.0 5000 152.0 20000 - 16 38,0 1.00 57,4 1.52 34.5 5510138.0 22040 (I) HYDR-2010 54 10.1014.32 2” 50,8 71,1 34.5 - 32 10.1014.20 1.1/4” 20 1.25 1.96 10.1014.20 1.1/4” 32,0 2.00 49,8 2.80 34.5 5000 138.0 20000 - 20 32,0 1.25 49,8 1.96 5000138.0 20000 10.1014.24 1.1/2” - 24 10.1014.24 1.1/2” 38,0 1.50 57,4 2.26 34.5 5000 138.0 20000 - 24 38,0 1.50 57,4 2.26 34.5 5000138.0 20000 ® COVER: U.S. MSHA 2” APPROVED 10.1014.32 50,8 71,1 34.5 138.0 - 32 2.80 5000 20000 10.1014.32 2” 50,8 71,1 34.5 138.0Balflex - 32 2.00R13 2.80 5000 20000 Note: According to ISO 3862 / EN 856 2.00 type / SAE J517 type R13, the

mm inch 340 mm 13.4 inch kg/m kg/m 2,09 420 280280 16.5 11.0 1,56 11.0 3,90 1,56 500 4,96 340340 20.0 13.4 2,09 13.4 Balflex 2010 2,09  Balflex 2010 635 420420 25.0 16.5 3,90 16.5 7,09 3,90 500500 20.0 20.0 4,96 4,96 635 635 25.0 25.0 7,09 7,09 POWERSPIR SAE

100R13 hose is of 4 steel wire spirals on sizes – 12 (3/4”) and – 16 (1”) and of 6 steel® wire spirals on sizes ® Note: According to to ISO 3862 / EN 856 type R13 / SAE J517 type R13, thethe Balflex SAE Note: According ISO 3862 /–EN 856 type R13 / SAE J517 type R13, Balflex POWERSPIR POWERSPIR SAE – 20 (1.1/4”), – 24 (1.1/2”) and 32 (2”).

100R13 hose is is of of 4 steel wire spirals onon sizes – 12 (3/4”) and – 16 (1”) and of of 6 steel wire spirals onon sizes 100R13 hose 4 steel wire spirals sizes – 12 (3/4”) and – 16 (1”) and 6 steel wire spirals sizes ® – 20 (1.1/4”), – 24 – 32 (2”).

– 20 (1.1/4”), –(3/4”) 24(1.1/2”) (1.1/2”) and – the 32 (2”). * On sizes – 12 and –and 16 (1”) Balflex POWERSPIR DIN EN 856 4SH and SAE 100R13 hoses ® are the same. The working pressure of Balflex® ® POWERSPIR DIN EN 856 4SH SAE 100R13 3/4" and ® POWERSPIR DIN EN 856 4SH and SAE 100R13 hoses *Balflex On sizes – 12 (3/4”) and – 16 (1”) the Balflex POWERSPIR DIN EN 856 4SH and SAE 100R13 hoses * On sizes – 12 (3/4”) and – 16 (1”) the Balflex POWERSPIR DIN EN 856 4SH SAE 100R13 1” are higher than standard SAE 100R13. ® ® POWERSPIR DIN ENEN 856 4SH SAE 100R13 3/4" and areare thethe same.

The working pressure of of Balflex POWERSPIR DIN 856 4SH SAE 100R13 3/4" and same.

The working pressure Balflex ® ®

4

TrAle Hydrowashing hose for hot water

Hot water superservice 2SC blue Hot water superservice 2SC blue

ot water

Page: 1/1

Mento Hoses and Couplings Catalogue

13.3-5. Balflex Hydraulic Hoses / R13 PUR

ice 2SC blue

TrAle® Hot water superservice 2SC blue hose

Composition:

Composition:

·Inner tube: special synthetic rubber resistant to mineral, vegetable and hydraulic oil. ·Reinforcement: two braids of steel wire. ·Cover: synthetic rubber resistant to oil, abrasion and weather.

·Inner tube: special synthetic rubber resistant to mineral, vegetable and hydraulic oil.

·Reinforcement: two braids of steel wire.

From -40º C to +155º C (peak).

Working temperature:

·Cover: synthetic rubber resistant to oil, abrasion and weather.

Working temperature:

From -40º C to +155º C (peak).

nner tube: special nº synthetic rubber to mineral, hydraulic oil.Burst DN resistant Ø out vegetable WorkingandWorking Reinforcement:Part two braids of steel wire. Ø in Pressure pressure pressure Cover: synthetic rubber resistant to oil, abrasion and weather. (bar) (psi) (bar)

rom -40º C nº to +155º C (peak).

Part DN Ø in 1/4" 6,5 MSC0214A 10.2WJB.04 MSC0215A 10.2WJB.05

,1

,7

2,9

5/16"

Ø out

MSC0216A MSC0218A 13,9

5/16" Pressure (bar) 3/8" 1/2" 400

Working 400 Pressure (bar) 400

13,9

8,1

15,4

MSC0216A 10.2WJB.06 1/4" 3/8" 6,5 9,7 MSC0214A 12,9 MSC0218A 10.2WJB.08 Ø out Working 1/2" Working

in MSC0215A

,5

5

8,1 pressure (psi) 9,7

17,7 13,9 21 Burst 15,4 pressure (bar) 17,7

12,9 5800

21 1600

Working 5800 pressure (psi) 5800

Burst 1600 pressure (bar) 1600

400 5800 400 5800 275 3988 Burst Bending 400 5800 (mm) pressure radius (psi) 400 5800

R13 PUR ORANGE

Burst Bending Weight pressure radius (mm) (kg/m) (psi)

Burst

1600 1600

23200 23200

1100 Weight

3988 75

1100 0,19

85

0,22

15,4

400

5800

1600

23200

17,7

400

5800

1600

23200

90

0,28

21

275

3988

1100

15950

130

0,36

90 75

15950

1600 (kg/m) 1600

275 23200

Bending

Weight

23200 75 0,19 pressure radius (mm) (kg/m) (psi) 23200 85 0,22 130

23200

0,28 0,19 0,36

85

0,22

23200

90

0,28

15950

130

0,36

“A Hose Development for a Specific Application” The hose and fitting that offers extended life, improved performance and total sealing capability.

Cover Colour Identification: Orange Construction Tube: Reinforcement: Cover: Extruded Cover:

• •

oil resistant synthetic rubber Four high tensile steel spirals Environment resistant synthetic cover rubber Thermoplastic Polyurethane Elastomer Extrusion offers: -

Size I.D.

• • • •

Excellent wear resistance Total assembly encapsulation with the prevention of sea water ingress, particularly from external pressure in deep water operations.

Corrosion elimination Resistant against microbial attack Withstands repeated flexing Flame proof - halogen free

?

Working Pressure

O.D.

Min Burst Pressure

Test Pressure

Bend Radius

Part Number

Inch

mm

Inch

mm

PSI

bar

PSI

bar

PSI

bar

Inch

mm

10.1014.32PUR

2.0

50.8

*82.0

*82.0

5070

350

21750

1500

7605

525

24.8

630

* Approximate outside diameter - extruded cover thickness - 5mm The information gathered in this technical documentation (Catalogue) has an informative character and can be modified without previous notice. DICSA will not accept any type of responsibility resulting from an inappropriate use of the product, except the ones related to manufacturing defects.

Fig.1502 Hammer Lug Composite Type Swage Insert Printed on: 08/11/2014 at 00:19

Part Number

Fig.1 Siz

Part Number

Fig.1 Siz

A one piece Hose Nipple and a Half Union combined. This is a substitute for an NPT Male Insert with the union screwed on.

The information gathered in this technical documentation (Catalogue) has an informative character and can be modified without previous notice. DICSA will not accept any type of responsibility resulting from an inappropriate use of the product, except the ones related to manufacturing defects.

Printed on: 08/11/2014Part at 00:19 Fig.1502

Number

Size

Hose I.D. (inches)

ocumentation (Catalogue) has an informative character and can be modified without previous notice. DICSA will not accept y resulting from an inappropriate use of the product, except the ones related to manufacturing defects.

Printed on: 08/11/2014 at 00:19

MALE SUB AND NUT

FEMALE SUB

Part Number

Fig. 1502 Size

Hose I.D. (inches)

Part Number

Fig. 1502 Size

Hose I.D. (inches)

26.150203.3232

2"

2"

26.150204.3232

2"

2"

Material: Steel

Part Number

Fig.1502 Size

Hose I.D. (inches)