Dental Anesthesia Equipment & Services

Dental Anesthesia Equipment & Services 24 Hours Emergency Service & Support

Dental Air Compressor Installations

MTS provides Dental Air Compressor installations and system sales. In addition to helping you decide what the right type of compressor for your facility will be, we’ll also help you with blue printing, ordering copper pipe and equipment, and ensure that your installation is certified to meet NFPA codes and standards.

Dental Vacuum Pump Installations

From large to small, we carry all sizes of dental vacuum pumps, and we can even help you decide what vacuum pump will be best for your facility. If you just need the installation, we can assist with that as well.

Annual Inspections & Maintenance

All dental facilities that provide compressed medical air and medical gases is required to receive annual inspections on their gas delivery systems. We provide a simple and automated inspection service once annually, and can even conduct maintenance inspections and provide emergency inspections.

Dental Flowmeter Repairs

Dental Flowmeters can be expensive to replace, fixing them is a great alternative that will always save you money. Getting you’re flowmeters repaired is as simple as printing off our packing slip and mailing them directly to us with a CC Authorization form. See the link below for more details.

Dental Air Compressor and Dental Gas Installations Everything you Need: MTS works with facility directors and dentists to provide streamlined dental gas installations. Our services include drafting blueprints, identifying system requirements, shopping for and ordering the equipment you need at wholesale prices, and certifying the completed installation per NFPA guidelines.

Dental Gas Installer Requirements: Per NFPA guidelines, dental gas installations must be performed by ASSE 6010 Medical Gas Installers, and ASME IX Brazers if copper pipe is involved Our Dental Gas Installers: Our dental gas installation team can handle everything from plumbing 100 bed dental facilities, to installing small vacuum pumps in single room facilities. Upon completion of your new dental gas installation, MTS will provide you with a Medical Gas Verification. These verifications are required per NFPA guidelines and must be conducted on all new downstream pipelines and equipment within the gas delivery system.

Ordering the Equipment: We provide wholesale distribution through every major medical gas manufacturer spec’d for your project, so all installations contracted through MTS come with discounted prices on equipment.

During the planning and blueprinting phase we’ll be able to tell you everything you need, how long it takes to be delivered, what the cost will be, and what it costs to install and verify the project.

Dental Air and Vacuum System Maintenance Belt Inspections – Scroll compressor belts wear out over time and it is suggested to replace them annually to ensure there are no unexpected tears during regular use. Belts should, however, be checked for this wear on a quarterly basis. Ensuring proper tension is the best way to avoid fraying and belt wear over time.

Analyzing Alarm Readings – Alarm readings will tell whether or not there are temperature issues with the pump, in these cases bearings, O-rings, and seals will be replaced.

Overload – Check the conditions of overload on both vacuum pumps and compressors by checking amp readings once a quarter. Proper function of overloads is also tested by manually tripping the overloads.

Valves – Poppet valves, plate valves, and ring valves should be replaced annually Oil Compressors – Oil-flooded compressors need to have oil changed every 6 months at least, depending on use.

Medical Testing Solutions Phone Number - 8447685744 Website - https://medicaltestingsolutions.com/ Email Address - support@medicaltestingsolutions.com