MC Concept chair – the Black Diamond!

MC CONCEPT - The black Diamond

速 Page 1

MC CONCEPT 1103

Page 2

MC CONCEPT 1121

MC CONCEPT 1170 II

MC Joystick

MC Concept chair – the Black Diamond!

In nature, a Diamond is never perfect! It is the polishing and refinement requiring expertise and extensive experience that produces the Diamond’s beauty and increases its utility value. Refinement is therefore of crucial importance to the Diamond’s value.

Our new MC Concept chair has been created in much the same way! From the moment we begin the building process with the completely raw undercarriage until the finally adapted chair is ready for use, MC Concept has developed from something raw and unfinished into something perfect with a large utility value.

Page 3

Page 4

Quality and trust Quality creates trust and lasting trust is only achieved through quality consciousness in all our actions.

We endeavour to set an example by listening to our customers’ wishes and feelings, and through this setting new standards that has utility value for our customers.

Page 5

Central drive

Central drive MC Concept is a centrally driven powered wheelchair with six wheels, of which 4 always have contact with the ground. The ideal weight distribution with the centre of gravity directly above the driving wheels combined with the patented central drive gives the MC Concept unique road-holding qualities, both indoors and out.

The central drive excels in the fact that the MC Concept has a much smaller turning circle than wheelchairs with front or rear wheel drive.

The central drive therefore makes it possible and easier to navigate in narrow surroundings such as the kitchen, hallway, bathroom or office.

Door sills are no obstacle either with an MC Concept chair. Outdoors the central drive is experienced in providing increased directional stability, especially when driving on sloping terrain.

Page 6

Central drive

Page 7

Suspension

Suspension Surface irregularities are absorbed by the chair’s suspension system, the pneumatic tyres and the ergonomic seating. Puncture proofing is available.

Combined with the low centre of gravity, the suspension system has the effect of giving the MC Concept powered wheelchairs very stable and safe road-holding qualities.

Page 8

Suspension

Page 9

Page 10

Sitting comfort Sitting down requires more than we think!

The general perception is that our body, i.e. our muscles, do not need to work very hard when we sit down and that they therefore relax. This is only true if we are sitting correct posturally for our particular needs.

A well-designed seat helps to prevent fatigue and other ailments.

For this reason each seat is constructed so that it may be adjusted to the shape of the user’s body, focussing on the correct height for the seat, the correct seat depth and the correct support for the body.

Height adjustment: With the height adjustment option this has the effect of ensuring that clothing stays in place and that the headrest remains in the correct position. (Pressure sore prevention).

Specific sitting problems require special solutions: Individual solutions can be incorporated in the MC Concept chair so that the chair is designed to meet precisely your personal needs and wishes.

Page 11

The relaxing position

By tilting the chair further back and then also adjusting the backrest, you can find the most relaxing position.

In this position, the strain on your spinal column is minimal, your body weight is distributed optimally and your body can relax in a comfortable way.

The legs, when elevated correctly, can be positioned above the heart so that any pressure on blood circulation is reduced.

Page 12

Page 13

Seat tilt

By utilising the tilting function together with the leg supports and backrest adjustment, the ideal position for relaxing can be found, while at the same time allowing the body’s functions to recuperate. Pressure on the spinal column is relieved while muscles, tendons and joints relax.

Body weight is distributed across a larger surface area and the risk of local strains are reduced; as is the risk of pressure sores.

The seat tilt function may also be utilised to gain better comfort and balance when driving up and down hills.

Page 14

Raising the seat The 30 cm seat (12�) raiser provides the opportunity of meeting other people at eye-level and makes many daily tasks, such as accessing cupboards, easier.

Page 15

Back rest Unique adjustment options for the back The Spinalus module system is special in that it may be easily adjusted at home by users suffering from scoliosis, kyphosis etc. This is possible because the back bars on each side are jointed and can be adjusted in two places. Furthermore the back of the seat has adjustable Velcro straps, so it is easy to achieve the desired shape.

The back of the seat is also equipped with bracket holders for hinged thoracics, different head supports etc. The chair may also be equipped with electrical functions such as electric seat adjustment, electric backrest adjustment, electric seat tilt and electric foot supports.

Seat widths of 35 cm (14”), 40 cm (16”), 45 cm (18”), 50 cm (20”), 55 cm (21.5”) and 60 (24”) are supplied as standard (electric forward and back adjustment, electric seat rotation are discontinued)

The back may be adjusted (snapped) in two places and this can be done independently on each side.

The Velcro strip on the backrest provides good sitting stability and the desired back shape.

Page 16

Back rest

For every need.

Back cushions with different shapes are easily fitted with zipper

Page 17

Seat cushions

To make optimal use of the MC Concept chair we have developed a seating system based upon our well-known Spinalus module system. This provides the desired position quickly and correctly.

Replacement and adjustment of the seat is simple and easy, but provides great stability and comfort.

Combined with the Spinalus module system and the flexibility of the seat programme, the optimal sitting posture can be obtained easily and conveniently.

Individual solutions with other seating systems may be supplied, for example with shell seats, pressure sore relieving cushions etc.

Page 18

Seat cushions

Page 19

Headrests

For headrests to function as intended, they need to be correctly positioned.

An absence of support for the head is one of the greatest challenges for many users.

Headrests should be positioned so that they support the back of the head and not the neck.

With the adjustable headrest many negative strains on the musculature are prevented.

The headrest is part of our Spinalus module system.

Page 20

Armrest

The correct height and length for the armrest is a significant part of sitting comfort.

Without support it is difficult to keep the body balanced.

Operation of the joystick should be ergonomic; the armrest can therefore be tailor-made and adjusted for individual users.

Page 21

Foot supports

The MC Concept chair can be equipped with different types of foot and leg supports as required, both manual and electrical.

Fitting of our electrical leg supports is simple and easy as it clicks into place without any loose wire connections.

Page 22

Steering

Page 23

Steering options

Just about any type of steering can be utilised to control and steer the MC Concept chair. In principle these options are limited by imagination only.

We offer everything from very simple steering to the most complex solutions in accordance with the user’s entirely individual requirements. This means that in practice you can have a simple joystick or advanced solutions such as chin steering, torso steering, sip and puff controls.

Page 24

Control the environment

Page 25

Page 26

MC CONCEPT 1103 MC CONCEPT 1121 MC CONCEPT 1170 MC CONCEPT for every need...

Page 27

MC Concept 1103 MC Concept 1103 Multi is an all-round indoor chair, which is modular in construction and which may be completely adapted in accordance with individual needs and requirements with the help of our large and comprehensive range of accessories.

The extremely small turning circle of just 47 cm makes it the most suitable chair on the market for use at work, at the office or at home, school or institution. The chair can be used for limited outdoor driving on nearby even terrain.

Crash tested; can be supplied with electrical docking station for car transport.

MC Concept 1103 Total length Total width Total weight with full spec (45 cm seat) Height of seat with cushion from (with 30 cm lift) Height of seat without cushion from (with 30 cm lift) Max. speed Clearance Driving distance: Climbing ability with max. user weight Max. user weight Turning circle Batteries

Page 28

79 cm / 31” 58 cm / 23” 163 kg 48-78 / 19”-30” 42-72 / 16”-28” 6 kph / 4 mph 7.5 cm / 3” 25 km 8º / 14% 125 kg 94 cm / 37” 2x12 V / 34 aH

MC Concept 1121 – for children and adults MC Concept 1121 is the optimal indoor-outdoor chair for the demanding user who wishes to manoeuvre in narrow surroundings such as lifts, small kitchens and bathrooms.

Despite the small dimensions of the chair it is still well-suited to outdoor driving due to its traction, ability to scale kerbs of up to 7 cm, a top speed of 8 km/h and a range of up to 40 km with a single charge. 50 cm turning circle.

Crash tested; may be supplied with electrical docking station for car transport.

MC Concept 1121 Total length 89 cm / 35” Total width 61 cm / 24” Total weight with full spec (45 cm seat) 180 kg Height of seat with cushion from (with 30 cm lift) 51-81 / 20”-32” Height of seat without cushion from (with 30 cm lift) 45-75 / 17”-29” Max. speed 8 kph / 5 mph Clearance 7.5 cm / 3” Driving distance: 40 km Climbing ability with max. user weight 10º / 17% Max. user weight 150 kg Turning circle 100 cm / 39” Batteries 2x12 V / 56 aH

Page 29

MC Concept 1170 II – a powerful cross-country electric wheelchair MC Concept 1170 II is the chair for active and demanding users who demand a life with as few limitations as possible.

MC Concept 1170 II is a powerful, cross-country electric wheelchair with good manoeuvrability and balance for outdoor use.

Thanks to the patented central drive the MC Concept 1170 II has only a modest turning circle of 116 cm.

The two powerful motors and the large drive wheels provide good accessibility – even in winter conditions.

MC Concept 1170 II Total length 117 cm / 46” Total width 67 cm / 26” Total weight with full spec (45 cm seat) 180 kg Height of seat with cushion from (with 30 cm lift) 52-82 / 20”-32” Height of seat without cushion from (with 30 cm lift) 46-76 / 18”-30” Max. speed 10 kph / 6 mph Clearance 9 cm / 3” Driving distance: 35 km Climbing ability with max. user weight 10º / 17% Max. user weight 150 kg Turning circle 130 cm / 51” Batteries 2x12 V / 56 aH

or 2x12 V / 60 aH

Page 30

Accessories

Page 31

Concept seating

Spinalus Pro The most flexible seating solution you have seen with unique adjustment on the back, and the alternative seat and back cushions. Can be adjusted on site, suited well for users with assymetrical spinal shape, such as scoliosis or for various other needs. The back is provided with mounting slots for various side supports, head supports. Available with manual or electric backrest adjustment, in fabric or vinyl. A number of pads supplied with Clima Therm that ensures constant temperature. The Spinalus can be supplied in a variety of seat sizes, possibly also on special dimensions.

Item number C2-0735N-VB C2-0741N-VB C2-0740N-VB C2-0745N-VB C2-0750N-VB C2-0755N C2-0760N C2-0115

Item name: Spinalus Pro sb35 sd32-52 rh36 (Child) sb40 sd32-52 rh48 (Junior) sb40 sd32-52 rh56 sb45 sd32-52 rh56 sb50 sd32-52 rh56 sb55 sd32-52 rh56 sb60 sd32-52 rh56 Electrical back

Ergo Seat Ergonomically shaped seat in vinyl. High comfort and good adaptability.

Adjustable seat depth and angle adjustable back. Available seat width 35,37,40,45,50,55 and 60 cm.

HD-seat Extra reinforced version of the Ergo seat for user weight up to 250kg. Armrest also reinforced. Seat width 60, 65 and 70cm.

Simba Our beautiful and customised modular seat is well-suited for children. Available in 4 sizes with the seat width from 18-40 cm. Possibilities for active or passive back in standard finish. Individual seat depth adjustment, separately right and left side.

Back Angle adjustable. Special Stealth and Body Point fixation equipment.

MC Concept 1103

MC Concept 1121

MC Concept 1170 II

Page 32

Concept seating

Swivel Stealth Thoracic Support Multi-Adjustable. Asymmetric adjustment also possible.

Thighsupport Adjustable in height, width and angle.

Hemiplegic armrest for mounting on standard armrest. Swivel.

C2-0280 høyre C2-0281 venstre

Adapter for back mounted armrest SR-00519 Right SR-00520 Left

Armrest padding with thigh support SR-01642 Child Right SR-03696 Child Left SR-01641 Junior Right SR-03697 Junior Left SR-01640 Adult Right SR-03698 Adult Left

Lumbar Support SR-03932 lower back cushion air SR-03933 Air Pump

Page 33

MC Concept headrest

Headrest MC multi-adjustable S2-0061 Adult, fabric S2-0071 Children, fabric T-127-07-027 artificial leather

Headrest MC with adjustable side support C2-0270 Adult fabric C2-0271 Adult artificial leather C2-0272 Junior / child fabric C2-0273 Junior / children artificial leather

Headrest Stealth Comfort ST CP280 Adult ST CPN380 Children CR-01175 mounting Bracket Concept seats. Possibility for further extension of lateral support and possibly switches, etc.

Headrest Stealth Combo SU310 L SU328 XL SU318 S Possibility for further extension of lateral support and possibly switches, etc.

Headrest Stealth with headrest ST-SU108 Adult ST SUN120 Children Possibility for further extension of lateral support and possibly switches, etc.

Headrest Stealth i2i Revolutionary head support positioning and head and torso. Comes in sizes S, M, L and XL and the short long arm. Possibility for further extension with lateral supports and possibly switches.

Stealth Special Head Restraint Extensive possibilities of different equipment, such as swivelarms for lateral support, various pads and Switches and more. Highly available for use by various special controls. We help you to solve your needs.

Page 34

MC Concept leg support

Electrical leg support Has 2 motors for electric angle and electric length compensation, fits different seat widths.

CR-01200 Adult CR-01201 Kids / Junior CR-01217 Extension 5cm

Individual leg support Swivel, electrical and easily removable, without cable.

Provides good leg support and length compensation.

CR-00870N Standard adult, right CR-00871N Standard adult left CR-00872 Junior right CR-00873 Junior left CR-00970 Adult sb50 + right CR-00971 Adult sb50 + left CR-00876N Add support adult / Junior right CR-00877N Add support adult / junior left CR 00996 Add support sb50 + right CR 00997 Add support sb50 + left

Individual leg support, manual Swivel and easily detachable Provides good legs and length compensation C5-0057 Adult right C5-0058 Adult Left C5-0041H Junior right C5-0041V Junior Left C5-0470 Add support adult, pieces.

C5-0475 Add support junior, pieces

Manual leg support C5-0026 with little footplate C5-0030 with large footplate C5-0031 Extension

Amputee leg Support Mounted in the seat c-rail. Depth, height and angle adjustable. Fits both right and left.

T-127-06-103 pieces.

Page 35

MC Concept accessories

4-point belt T-127-06-142 Adult T-127-06-143 Children

Pelvic Belt and roller belt MC T-127-06-144 Hip Belt C2-0260 Roller Belt

Belt with electric adjustment T-127-06-145

Belts, jackets and fixing accessories We offer a wide variety of fixation devices.

Ankle Fixation MC C5-0060 Adults C5-0065 Children / Junior

Mount control box with parallel shift

Bag armrest C5-0430

Backpack C5-0001

Hook for Bag C5-0440

Page 36

MC Concept accessories

Crutch Holder Mounted in the seat C-Rail C5-0450

Fender Wheel CR-00604 per unit

Tray Table C5-0070 Standard without cut out C5-0071 Cut out right C5-0072 Cut out left other sizes and special designs on demand

Control panel with buttons To operate the electric chair’s function.

Easily placed where you want.

C5-0240

Basket C5-0580

Lighting Set C2-0080

Assisted controlled joystick-controlled With the adjustable hoop / handle.

CR-00774KPL complete set including Joystick

Assisted controlled (alt1) With a guide for self-driving and companion driving. Complete set including guide, joystick box attendant control control panels with cable, excluding installation.

EF150KPL

Assisted controlled (alt2) With just a companion guide for management, complete set excl. assembly.

EF150KPL-LEDS

Control Box Assisted controlled C50620N Control Box ACU3 u / Cable CR-00174 Cable Bus 1.5 m C5-0160 Joystick companion control ACU1 Page 37

MC Concept control equipment

Control Box Dolphin CR-00117 The buttons for controlling the electric features

Dynamics with color LCD screen and 7 buttons Prepared for the management of computer mouse and environmental control. Can be combined with new charges powerful electronics (power module) for extra strength and traction.

DX REM550 Control Box DX2 DX2-PMA90L Electronics 90a including light DX2-Loom-PM2 Connector Kit

Control Box Desktop with buttons for controlling electrical functions.

CR-00102

Joystick remote Requires master control box C5-0170

Mini Joystick For very small movements, many alternate assemblies.

Requires master control box CR-00703

Mini Switch Small, placed where you want.

CR-00357

Buddy Button Switch Available in many colors C5-0320

Different joystick grips We have a large selection of different joystick grips.

Steering Box G90 CR-00920 G90A The outputs for external switches CR-00 184 G90A With two rocker switches

Page 38

Securing MC Concept in a vehicle Together with Dahl Engineering we have developed a docking system that raises the level of safety for wheelchair users to new heights.

The combination of docking system and chair has been crashtested and approved for the requirements laid down in ISO 10542-3 and 7176-19.

In addition to the above-named tests, it also meets the requirements laid down in EU M1 safety requirements for passenger cars.

EU Directive 76/115-2005/41 74/408-2006/96EU (relating to the anchorage of seats and safety belts in motor vehicles).

Thereby TĂœV approved. EU Directive 72/245-2006/28 (relating to electromagnetic compatibility in vehicles).

Dahl docking station and MC Concept 1121 are the only system in the world tested with the Safety/Lap Belt integrated into the vehicle.

Car seat A seat base frame is also to be found for e.g. standard VW Caravelle seats which fits the same docking station, which is also crash-tested and approved.

Ordering information If the docking station is used for MC Concept 1103, 1121 and 1170 II, the installation kit for the docking station should be ordered from Medema Item no.: Item name: CR-02758 Installation kit 1103 for Dahl Docking station including belts CR-0275 Installation kit 1121 for Dahl Docking station incl. belts Dahl Docking station is ordered by the vehicle fitter or HMS from: Refer to local dealer

Chairs that have been crash-tested with straps Many of our chairs have also been crashtested with straps and have good, visible strap fastenings mounted as standard on the chairs.

This makes safety in connection with transport to and from school in disabled vehicles combined with docking in private passenger cars a safe option.

Chairs that have been tested with strap fastenings: Mini Crosser model, MC Concept 1103 and 1121.

You can find more information about securing in cars on our website www.medema.no Page 39

Mini Crosser M-Joy

Now everyone can drive a Mini Crosser The Mini Crosser model M-Joy with joystick control was developed for users with limited strength in their hands and arms.

• Suitable for young people and adults.

• Large wheels and great suspension.

• Mini Crosser’s wide range of seats and accessories.

• Can be supplied with a cabin.

• Extremely stable.

Page 40

Now everyone can drive a Mini Crosser, enjoy the freedom‌

Page 41

Our popular paediatric model, the 1103‌ - Robust and smart for young people

Page 42

MC Concept

Made in Scandinavia for the Nordic climate and terrain!

Information For information about Mini Crosser go to minicrosser.com, where you can also find your nearest dealer.

If you have any questions, please e-mail info@minicrosser.com Exceptions Printing errors excepted. The range and the technical specification are subject to alteration.

Product specifications and equipment can vary from country to country.

Page 43

MC CONCEPT - The black Diamond

庐 Mini Crosser A/S Enggaardvej 7 路 DK-7400 Herning 路 Denmark Tel. +45 70 10 20 54 Fax +45 97 16 85 82 www.minicrosser.com E-mail: info@minicrosser.com ISO 9001:2000 approved

Page 44

ACL Mobility Limited 65, Whitchurch Lane, Bishopsworth Bristol BS13 7TE. Freephone 0800 169588 or 01179 642255 Fax: 0117 9645557 Website: www.acl-mobility.co.uk