How To Charge RV Battery While Driving?
As a new RV owner, it’s common to wonder whether they can charge their RV batteries themselves. If you don’t want your camping trip to be impeded, you must need to have a fully-charged and well-functioning RV battery. Not having a fully charged RV battery will impact its capacity to hold a charge. Like you can’t avoid a motorhome repair in Sacramento is required to keep your RV functional and working correctly, its battery health is important to ensure for not letting your trips get restricted.
Here are the steps for how to charge an RV battery while driving: You can charge your RV battery while you are driving. But, when it comes to recharging RV batteries fully, traditional ways for automatic charging are inadequate. These methods don’t charge the RV battery adequately. Before you know how to charge your RV battery with new methods, here are some essential things you need to know about the RV battery. Taking care of RV batteries is crucial when your RV or motorhome is in storage. You must regularly check on your batteries. When remaining idle over a long period, they will get flat. Buy a new battery in the new season if there is a need. The RV needs to be connected to an electric outlet while charging your RV battery. With proper maintenance and care, an RV battery can last up to 5 years. When your RV vehicle is in storage, make sure you remove the ground wire to prevent the battery from getting drained. If you’re not confident about charging the RV battery yourself while driving, you can always hire a licensed service offering trailer repair in Sacramento, ca on the way to charge your batteries.
Steps to take for charging your RV battery while driving 1. Combine the batteries with a power source While driving an RV, connect your RV battery to a power source. In this situation, your truck is the only energy source that can be connected to your RV battery. To minimize voltage loss, you must use quality cables and plugs capable enough to bear a high amount of power.
2. Locate where the VCR disconnects and configure the connection
there: This connection will let the RV battery charge automatically the moment you will start your recreational vehicle. When the truck starts, the relay will open. But, this happens when both the start and auxiliary batteries are set to preset. The relay will close after the battery is disconnected, and the battery will charge when the relay is open. 3. After the connection, here are the charging phases: ● The Boost or Bulk phase This is the primary phase where the frequency of the charge decreases, which allows the voltage storage of the battery to increase. ● The Float This phase includes the drop-down on the battery charge, and the drop will go up to approximately 97% of the cost. ● Absorption Phase In this charging phase, the drop-down on the battery charge will reach nearly half of the boost. Then, it will remain at this level for good. These above-mentioned steps will allow you to charge an RV battery while driving. But, if you think this process is hard to understand and you lack in-depth knowledge about battery charging, it’s best to take the assistance of a licensed Sacramento trailer repair professional.
Source: https://bit.ly/3JyLWIf