Component 1, Section 2

Interior and Architectural Design Component 1: Part 2

Maya Duarte

MODEL OF FIRST IDEA

For my first model development I decided to utilise a mixture of all my research into creating a unifying model that features aspects of the rhythmic ribbon, hoop structures above and a flow of movement throughout. Upon my research of sculptures, I came across Richard Deacon who is a British sculptor, and he created this curvy structure below, I find this very inspiring to my model as it features a similar flow and has a very 3D contour.

I decided to remove the box structure in my visualising scenarios to convey how the model would look without its rigid box structure.

Richard Deacon Sculpture

MODEL INSPIRED BY DAMON HART

Inspired from my sculpture research of metal sculptures by Damon Hart included in my exterior mood board, I made these models to explore how I could potentially interlace aspects of the curvature he uses in my design.

SKETCHUP DEVELOPMENT OF PREVIOUS IDEAS

After gathering many inspirations from a range of primary and secondary sources, I have decided to incorporate the most appealing elements to my design which led me to a creation of a potential idea that can be further finalised. The scenario above is the initial structure of this idea which set the foundation for my designs on the right which are based on the sketches I created below.

DEVELOPMENT OF SKETCHUP THROUGH MODEL

To further develop my previous SketchUp model, I created a model using varying materials following the structure of the one digitally made.

MODEL ON SIGHT INVISIONMENT

After the creation of a more developed SketchUp model, I believed it to be useful to superimpose my idea onto the real site to see if any changes on scaling can be made. I also decided to superimpose my model In real life to get a outcome of different quality, less sense of software machinery.

Roadway into residential lot, could potentially lead to an underground parking lot in the gymnastics centre.

Pedestrian Pathways

Traffic Light Crossroads, gymnastic centre will have convenient access from both roads.

Lidl Supermarket

INTERIOR SECONDARY RESEARCH

Cafes: “Primo Café Bar”

To provide more insight into creating a successful interior, I have decided to research into existing cafes as I will also be creating a café space within my gymnastics centre. What I realised is that I will have to find a way to make my café fitted into a dome form, perhaps by placing a circular counter against the wall.

INTERIOR SECONDARY RESEARCH

Changing Facilities: “The Well”

Since my gymnastics centre will have to include changing facilities, I wanted to gather inspiration to make the best possible outcome that creates a comfortable and bright space for rhythmic gymnasts. The Well is a wellness member ship club in New York designed by Miami Studio Rose Ink Workshop. Featuring very light interiors creating a space of cleanliness which is an important concept I want to incorporate in my design.

INTERIOR SECONDARY RESEARCH

Changing Facilities: Courreges

This is another interior that features a changing room I am quite inspired by due to materials and the way the rooms are by the side leaving a seating space in the centre. This changing room is situated for a retail store but will still be applicable to my design.

INTERIOR SECONDARY RESEARCH

Material: Glen Howell’s English National Ballet School

Through wider research into dance studios and how they maintain privacy, I found that the English National ballet school uses frosted glass in studios so that people can only see glimpses of movement and not the full action which helps maintain boundaries.

From analysing the floorplan, I realised that they attempt to provide a green ambiance throughout the space. The Green room which is the hub for dancers to rest and the grass roof.

Both of these green elements makes the space feel more grounded in nature which is useful for dancers who might feel overwhelmed at times.

INTERIOR DETAIL PLANNING

First large training Space with upstairs viewing

Second training carpet

Dome: Green space for when gymnasts need tranquillity

Dome with extra facilities Potential Café space

Entrance, reception area on ground floor

Since there are specific requirements for this gymnastics centre, it is important to be aware of how the exterior will effect the interior. I kept this in mind while creating my previous SketchUp idea alluding to tall ceilings as rhythmic gymnasts need a large open space. I also drew floorplan samples with more detailed description of the interior design, after drawing I have realised I will have to make the second training carpet space with a taller ceiling so that I will be able to create a second floor above the carpet. My interior sketches include all requirements stated in the design brief

A primary research sketch that inspired this idea and a dome prototype.

SecondFloor:

INTERIOR DETAILING:

Here is a more developed interior design of my first and second floor which will be re evaluated in SketchUp when creating the final piece.

Reception: The reception will value cleanliness and open space, following a minimalistic colour pallet as previously mentioned.

Café: After researching into cafes, I have decided to create a design that will reflect the healthy menu. This area will be for gymnasts to gather energy back in a healthy way.

Changing rooms/ Bathrooms: Inspired from my secondary research into such interiors.

MODEL MAKING ON PREVIOUS SKETCHUP

I decided to create a model exemplifying the changes I will be making based on the interior planning: the right side of the building will have to be raised in order for all the facilities to have space to function. While model making I have also realised the structure would work with curved walls inspired by the rhythmic ribbon and that it would still provide enough training space.

MODEL DEVELOPMENT AFTER RESEARCH

Here I created a more finalised version of my model after researching into interior plans and use of different materials. Creating floorplans have helped me form how I would like the overall architecture to appear. I have made alterations such as curving the walls, making another floor, creating a mezzanine and possibly creating a flat roof instead of a curved one based on the structure of the National ballet studio of London.

SKETCHUP DEVELOPMENT PREPERATIONS

Here I have made a Sketchup model to help with the trajectory towards a finalised model that I will be making with new materials. The model here reflects the combination of all previous ideas such as the various sculptures, the metallic flow of Frank Gehry’s Guggenheim and secondary research of buildings with similar function.

Another aspect I have noticed is the importance of roofing, I was considering a flat roof but I might change it to a simple curved one to add more complexity and design elements inspired by movement and flow. Below I have also included the 3D printed form to show the movement of the walls.

Entrance

Second Floor

Surrounding Buildings

Road to Train station

Rhythmic Gymnastic Centre

Supermarket Bus stop

For my final 3D model, I have decided to 3d print the walls of the model as they include sleek curvatures, the second floor is presented in a material that is supposed to represent glass which my SketchUp model will showcase in further detail.

I have also included the surrounding buildings and pedestrian/vehicle pathways to show the accessibility of my rhythmic gymnastics centre

FINAL SKETCHUP MODEL

For my final developed model of an improved rhythmic gymnastics centre, I have incorporated primary ideas with existing structures that follow the theme of movement and flow which I believe is evident in my final outcome, taking most inspiration from the rhythmic ribbon, the hoop and the ball. The outdoor seating area on the roof is the latest addition as it creates a gateway to nature as athletes often find comfort and relaxation through fresh air.

Here are some shots capturing the details of my SketchUp model including section cuts that show the interior walls and interior plans.

EVALUATION

Looking back at the whole of component one and the journey I took to create my final solutions, I believe I have designed effectively towards my initial brief and specifications. Creating a visually pleasing exterior alongside interior planning that serve function towards rhythmic gymnasts. Working towards the specification I have also successfully designed an overall bright and alerting atmosphere in my exterior and interior design by researching into existing pieces of work, such as the different sport centres that all offer natural lighting from the amount of windows, this aspect has been reflected into my own design to create a sports centre with desirable qualities, making it an enjoyable and motivating space for the community.

An architect I found most inspiring towards my component one was Daniel Libeskind, my overall design approach has been rooted in Libeskind’s methodology. How he uses 2D shapes/forms and simple lines and transforms them into a physical 3D model with symbolic meaning, as earlier mentioned an example of him doing so was creating the Jewish Museum, he used a star of David, amplifying and abstracting the lines to create a angular museum.

I followed his method by basing all my layout designs on rhythmic gymnastics apparatus that I have explored and photographed in my primary research. My final outcome was based on many different elements such as the curvature forms in rhythmic gymnastics, I was also inspired by the rhythmic ribbon which is projected into the exterior of my outcome, adding extra visual detail to my overall.

To summarise, I believe my final outcome achieves and goes beyond the requirements set out at the start as I have designed accordingly based on research and inspiration from my theme of movement and flow. Perhaps an aspect I would potentially alter if possible would be a more detailed 3D model, but I wanted to focus on the detailing in my SketchUp model which I believe was effective in presenting the accuracy of my design.