Stainless Steel Pipe and Tubes Manufacturing Process

Stainless Steel Pipe and Tubes Manufacturing Process

Stainless Steel is one of the elements that the industrial revolution has made popular. Almost everything that needs to be sturdy and durable made of stainless steel.

For building, machines, bridges, etc. the rust-resistant version of iron is a must require. Stainless steel tubes and pipes are indispensable for modern structures and machinery.

In the following paragraphs, we will be discussing a brief idea about how the manufacturers make these durable, strong, and corrosion-resistant tubes and pipes nowadays.

The Process The process of manufacturing pipes and tubes involves four primary steps. Here is a brief account of how technology turns stainless steel strips into usable and utilitarian tubes and pipes of optimum strength and durability.

Rolling and Welding

The whole process starts with a few strips of good quality Stainless Steel. The Stainless Steel Manufacturer in Delhi always makes sure to choose the best quality material to produce the best quality tubes and pipes. Without the best quality steel strips, the manufacturers cannot make high-quality products.

Once the strips are ready, the manufacturers trim the edge and put these pieces through different levels off quality check to be sure of its durability and durability.

After the quality check process, these strips go inside the tube mill rollers depending on the required size of the product. The strips assume a tabular shape inside the tube mills. The fitted welding machine then trims the edges, using the TIG welding process to offer the product precision. This is how the basic Stainless Steel tubes and pipes come into existence.

Cleaning and Heating Once the rolling process is finished and the stainless Steel strips assume the desired tabular shape, the manufacturers cut these into smaller pieces. Different industries have different size requirements. Keeping in this mind, the Stainless Steel manufacturers cut the tubes and pipes into different sizes to match the varying range of demand of the market.

Once the cutting is over, then it’s time to make the tubes dirt free. However, the cleaning of the tubes and pipes is the next step that follows. Then cleaned off the tubes and pipes go through a heat treatment process that helps in the removal of weld stresses.

Cold Drawing

In the cold drawing, the oxalic soap solution coating covers the tubes and pipes.

This process is a lubricant for the surface of the tubes. However, when the cutting process goes on, manufacturers attain precision. Manufacturers of Stainless Steel tubes and die plugs draw over the pipes on the bench.

Final Procedure

Once the cold drawing process is over, the manufacturers apply all the required processes on the drawn-out pipes and tubes. These stages include cleaning, heat treatment, pickling, and straightening. Precision and good finishing make the quality of the pipes superior. However, manufacturers pay special attention to all the steps individually.

The best manufacturers of Stainless Steel products always focus on quality, precision cutting, and advanced technology to make each of the products top-notch.