MEWP Mobile Elevating Work Platforms
Welcome to this CSSI Mobile Elevating Work Platforms (MEWPs) Certified Operator Training and congratulations on selecting one of the most detailed and accurate equipment operator trainings available. This course is designed as part of a comprehensive training program that includes classroom (theory) and practical (hands-on) training and evaluation.
This CSSI course will utilize the IVES training curriculum and will provide a hands-on learning atmosphere to enhance the knowledge retention and attendee experience that goes BEYOND COMPLIANCE for those seeking high-level competency.
DAY ONE: All attendees will participate in the classroom instruction where a hands-on workbook will be completed in addition to a physical equipment pre-operation inspection, interactive workshop with CSSI’s – IVES certified equipment instructor, and finally, a written competency exam.
DAY TWO: Each attendee will have hands-on operational experience with each piece of equipment in a small group setting. These micro sessions will allow attendees one-on-one instruction and small group coaching in 2 hour blocks where attendees will perform their driving competency verification for each piece of equipment.
This operator certification program meets the requirements for the American National Standards Institute (ANSI) A92.22 SAFE USE and A92.24 TRAINING standard (June 1, 2020). These safe use and training standards are intended to reduce accidents when MEWPs are used. These standards apply to every operator and company that uses mobile elevated work platforms.
OBJECTIVES
The primary objective of this MEWPs operator training program is to provide you with the knowledge and skill required to demonstrate safe, competent operation of the equipment addressed. This overall objective may be broken down into several specific objectives that are secondary, but necessary, in order to reach the final objective of qualification as a MEWP operator.
REQUIREMENTS
• Attendees of this course must bring a body harness and a connector (lanyard or self-retracting lifeline preferred), as well as a hard hat.
• Attendees must have functional English language reading, writing, and speaking skills.
• Safety toed shoes and high visibility vest or clothing are recommended for all attendees.
• Attendees must be able to attend the full duration of the course.
OVERVIEW
The following overview will map out the path you will take as you move forward:
1. Thorough study and review of the contents of this course, which includes but is not limited to:
a. The rules: federal/state/provincial/territorial regulations, industry standards and company policies.
b. Technical theory: identity and function of the main parts, leverage, capacity and stability.
c. Operational theory: inspections, travel and setup, safe operation.
d. Parking/Shutdown and transport.
2. A written theory test to evaluate your understanding of the information reviewed.
3. Practical training on the topics covered on the specific type of MEWP you will operate.
4. Hands-on practice to acquire the skills necessary to demonstrate proper operation.
• Recertification is required every 3 years. The Master Builder Designation program will offer credits for completion of this course. For more information on becoming a ‘Master Builder’, please visit MBI’s website at www.mbi.build/mbd.
5. Practical skills test to evaluate your ability to demonstrate competent operation.
IVES CERTIFIED OPERATOR TRAINING
MOBILE ELEVATING WORK PLATFORMS
CSSI is proud to be a certified training instructor, having earned the training credential through IVES Training Group. IVES is North America’s leader in powered industrial equipment training systems. Since 1981, IVES has trained tens of thousands of trainers representing all walks of business and industry, who in turn, have utilized the IVES Training System™ to train hundreds of thousands of operators worldwide on powered industrial equipment such as:
Mobile Elevating Work Platforms
• Aerial Boomlift
• Scissor Lift
Forklifts
• Counterbalanced
• Rough Terrain / Telehandler
Loaders
• Front-end
• Loader Backhoe
• Skid-steer
Excavators
• Compact / Mini / Standard
• Rubber Tire / Crawler
With a reputation for quality that enables employers to quickly and efficiently achieve compliance with all relevant regulations and industry standards, IVES is the training provider of choice for thousands of companies from small, local business to Fortune 500 corporations across North America. More importantly, IVES’ operator training materials are comprehensive learning tools that provide trainees with a thorough understanding of safe equipment operation as well as a valuable resource to be used well after the training ends.
IVES training programs are compliant with all applicable federal and regional regulations and referenced industry standards. IVES’ Team of Certified Master Trainers are recognized as the best in the business in terms of technical knowledge, operational experience and instructional ability.
BRANDON BLACK
INSTRUCTOR
Construction Safety Specialists, Inc. West
Des Moines, IA
Brandon began his career as a card-carrying member of the Carpenter’s Local Union#106 and worked his way through the ranks of several Iowa specialty interior contractors. Brandon was previously employed with an ENR Top Specialty Contractor where he worked on the site of Microsoft’s large Data Center project in Des Moines. This opportunity allowed him to look at construction project safety from a different perspective, all while providing him knowledge growth of “whole-project” safety. Brandon now helps to provide a well-rounded safety-mentality to job sites and provides the CSSI team with a “field perspective” while delivering a wide array of services related to inspections, site visits and employee education. In addition to being a certified American Red Cross Instructor for First Aid/CPR/AED, Brandon has earned certificates from the National Safety Council that include Specialist in Safety & Health and Advanced Safety as well as being a certified equipment instructor through the IVES Training Group.
Class size is limited to 15 participants.
MAY 13-14, 2025
ELEVATE Business & Events Center 4100 Westown Pkwy West Des Moines, IA 50266
SCHEDULE
TUESDAY, MAY 13
8 am - 12 pm: Classroom Training 12 - 1 pm: Lunch 1 - 4 pm: Classroom Training
WEDNESDAY, MAY 14
Hands-On Practice & Evaluation
7 - 9 am | 9:30 - 11:30 am | 1 - 3 pm
Each participant will select a scheduled time slot.
LONGMAN
SAFETY CONSULTANT
Construction Safety Specialists, Inc.
West Des Moines, IA
Luke began his career in law enforcement in 2000, and, while in that role conducted training for over ten years in numerous assignments as a member of the Jefferson County Sheriff’s Office in Denver, Colorado. These years of service helped him to learn and value the importance of leadership and accountability for safe operations, as well as the importance of quality and detail in professional training. He began his second career 4 years ago in the insurance arena, risk management arena specifically in worker’s compensation and risk management. In 2021, he began work in the State of Iowa for a large agricultural cooperative, which included roles in training, safety, and compliance. He conducted inspections in a multitude of hazardous environments, as well as conducted safety training for all employees. While in this role, he assisted with developing safety committees, as well as several other programs prioritizing behavioral-based safety. Over time he assisted with transforming company culture in the direction of becoming safety oriented. In the future, Luke continues his professional growth with additional certifications in order to fulfill emerging instructional opportunities and to continue to build a strong partnership with MBI membership. Luke brings a passion to enhance safety at home, work, and community.
LUKE
MEWP
Mobile Elevating Work Platforms
Boom Lift & Scissor Lift Operator Certification
Class Size is Very Limited ! Register Today!
May 13-14, 2025 West Des Moines, IA
Registration
(Please Copy for Additional Registrants)
A confirmation for the class will be forwarded upon receipt.
Name: Title:
Company:
Email: Cell:
Address:
City, St. Zip:
Attendees are able to select their preferred time slot for practice & evaluation on Day 2. Only 5 seats are available in each time slot. Time slots will be filled on a first come, first serve basis. Please mark your 1st and 2nd choices: 7:00 - 9:00 am 9:30 - 11:30 am 1:00 - 3:00 pm
Fees: $350 / Person - MBI Members
$425 / Person - Non-Members
Fee includes: classroom training, equipment practice time, written exams, practical exams and lunch on the first day.
Cancellation Policy: Registration cancellations must be submitted to Construction Safety Specialists via email to NFry@MBI.Build. Cancellation requests submitted at least 14 days prior to the respective session will be refunded 100%. Cancellations received between 7 and 14 days prior to the respective session will be refunded 50%. No refund for cancellations less than 7 days prior to the respective session. No refund for no-shows.
Payment Method:
Check Enclosed (payable to Construction Safety Specialists, Inc.) Credit Card Please Invoice
Credit Card Type:
A 3% transaction fee will be applied to credit card transactions
Please send registration and payment to
CONSTRUCTION SAFETY SPECIALISTS, INC.
4100 Westown Pkwy | West Des Moines, IA 50266
ATTN: Nichole Fry - NFry@MBI.Build
For questions, please contact Brandon Black at (515) 577-5198 or Brandon@IowaCSSI.com